UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

Form 10-K

 

 

Commission File No. 001-15903

CARBO Ceramics Inc.

(Exact name of registrant as specified in its charter)

 

575 North Dairy Ashford

Suite 300

Houston, Texas 77079

(Address of principal executive offices)

(281) 921-6400

(Registrant’s telephone number)

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:
None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes þ     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

 

                    (Do not check if a smaller reporting company)

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes o     No þ

 

The aggregate market value of the Common Stock held by non-affiliates of the Registrant, based upon the closing sale price of the Common Stock on June 30, 2010, as reported on the New York Stock Exchange, was approximately $1,156,181,491. Shares of Common Stock held by each executive officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

 

As of February 22, 2011, the Registrant had 23,159,918 shares of Common Stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the Proxy Statement for Registrant’s Annual Meeting of Stockholders to be held May 17, 2011, are incorporated by reference in Part III.

 

 

TABLE OF CONTENTS

 

 

 

General

 

CARBO Ceramics Inc. (the “Company”) is the world’s largest supplier of ceramic proppant, the provider of the industry’s most popular fracture simulation software, and provides fracture design and consulting services. The Company also provides a broad range of technologies for spill prevention, containment and geotechnical monitoring. On October 10, 2008, the Company completed the sale of its fracture and reservoir diagnostics business. Because of the transaction, the results of this business have been accounted for as discontinued operations. Continuing operations include the Company’s ceramic proppant, software, consulting services, spill prevention and containment and geotechnical monitoring businesses. The Company sells the majority of its products and services to operators of oil and natural gas wells and to oilfield service companies to help increase the production rates and the amount of oil and natural gas ultimately recoverable from these wells. The Company’s products and services are primarily used in the hydraulic fracturing of natural gas and oil wells. The Company was incorporated in 1987 in Delaware. As used herein, “Company”, “we”, “our” and “us” may refer to the Company and/or its consolidated subsidiaries.

 

Hydraulic fracturing is the most widely used method of increasing production from oil and natural gas wells. The hydraulic fracturing process consists of pumping fluids down a natural gas or oil well at pressures sufficient to create fractures in the hydrocarbon-bearing rock formation. A granular material, called proppant, is suspended and transported in the fluid and fills the fracture, “propping” it open once high-pressure pumping stops. The proppant-filled fracture creates a conductive channel through which the hydrocarbons can flow more freely from the formation to the well and then to the surface.

 

There are three primary types of proppant that can be utilized in the hydraulic fracturing process: sand, resin-coated sand and ceramic. Sand is the least expensive proppant, resin-coated sand is more expensive and ceramic proppant is typically the most expensive. The higher initial cost of ceramic proppant is justified by the fact that the use of these proppants in certain well conditions results in an increase in the production rate of oil and natural gas, an increase in the total oil or natural gas that can be recovered from the well and, consequently, an increase in cash flow for the operators of the well. The increased production rates are primarily attributable to the higher strength and more uniform size and shape of ceramic proppant versus alternative materials.

 

The Company primarily manufactures five distinct ceramic proppants. CARBOHSP^® and CARBOPROP^® are high strength proppants designed primarily for use in deep oil and gas wells. CARBOHSP^® has the highest strength of any of the ceramic proppants manufactured by the Company and is used primarily in the fracturing of deep oil and gas wells. CARBOPROP^® is slightly lower in weight and strength than CARBOHSP^® and was developed for use in deep oil and gas wells that do not require the strength of CARBOHSP^®.

 

CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^® are lightweight ceramic proppants. CARBOLITE^® is used in medium depth oil and gas wells, where the additional strength of ceramic proppant may not be essential, but where higher production rates can be achieved due to the product’s uniform size and spherical shape. CARBOECONOPROP^® was introduced to compete directly with sand-based proppant, and CARBOHYDROPROP^® was introduced in late 2007 to improve performance in “slickwater” fracture treatments.

 

During 2010, the Company began production of resin coated ceramic (CARBOBOND^® LITE) and resin coated sand (CARBOBOND^® RCS) proppants. The introduction of CARBOBOND^® LITE addresses a niche market in which oil and natural gas wells are subject to the risk of proppant flow-back. In the case of CARBOBOND^® RCS, the Company made the strategic decision to offer a lower cost, lower conductivity alternative proppant, in addition to its ceramic proppant products thereby broadening its proppant suite of products.

 

During the year ended December 31, 2010, the Company generated approximately 77% of its revenues in the United States and 23% in international markets.

 

The Company also sells fracture simulation software and provides fracture design, engineering and consulting services to oil and natural gas companies worldwide through its wholly-owned subsidiary, StrataGen, Inc. The

Company provides a suite of stimulation software to the industry that have marked capabilities for on-site real-time analysis. This has enabled recognition and remediation of potential stimulation problems. This stimulation software is tightly integrated with reservoir simulators, thus allowing for stimulation treatment and production optimization. The Company’s specialized engineering team consults and works with operators around the world to help optimize well placement, fracture treatment design and production stimulation. The broad range of expertise of the Company’s consultants includes: fracture treatment design; completion engineering support; on-site treatment supervision, engineering and quality control; post-treatment evaluation and optimization; reservoir and fracture engineering studies; rock mechanics and software application and training.

 

Demand for most of the Company’s products and services depends primarily upon the demand for natural gas and oil and on the number of natural gas and oil wells drilled, completed or re-completed worldwide. More specifically, the demand for the Company’s products and services is dependent on the number of oil and natural gas wells that are hydraulically fractured to stimulate production.

 

The Company also provides a broad range of technologies and products for geotechnical monitoring through its wholly owned subsidiary Applied Geomechanics, Inc. (“AGI”). AGI provides monitoring systems and services for bridges, buildings, tunnels, dams, slopes, embankments, volcanoes, landslides, mines and construction projects around the world. It serves a wide spectrum of customers in markets ranging from auto racing teams to surveyors, experimental physicists, radio astronomers and naval architects.

 

In October 2009, Falcon Technologies and Services, Inc. (“Falcon Technologies”), a wholly-owned subsidiary of the Company, purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention, containment and countermeasure systems for the oil and gas industry. The acquisition broadened the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide products that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

 

Competition

 

One of the Company’s largest worldwide proppant competitors is Saint-Gobain Proppants (“Saint-Gobain”). Saint-Gobain is a division of Compagnie de Saint-Gobain, a large French glass and materials company. Saint-Gobain manufactures a variety of ceramic proppants that it markets in competition with each of the Company’s products. Saint-Gobain’s primary manufacturing facility is located in Fort Smith, Arkansas. Saint-Gobain also manufactures ceramic proppant in China and Venezuela. Mineracao Curimbaba (“Curimbaba”), based in Brazil, is also a large competitor and manufactures ceramic proppants that it markets in competition with some of the Company’s products.

 

There are two major manufacturers of ceramic proppant in Russia. Borovichi Refractory Plant (“Borovichi”) located in Borovichi, Russia, and FORES Refractory Plant (“FORES”) located in Ekaterinburg, Russia. Although the Company has limited information about Borovichi and FORES, the Company believes that Borovichi primarily manufactures intermediate strength ceramic proppants and markets its products principally within Russia, and that FORES manufactures intermediate strength and lightweight ceramic proppant lines and markets its products both in and outside of Russia. The Company further believes that these companies have added manufacturing capacity in recent years and now provide a majority of the ceramic proppant used in Russia. The Company is also aware of an increasing number of manufacturers in China. Most of these companies produce intermediate strength ceramic proppants that are marketed both in and outside of China.

 

Competition for CARBOHSP^® and CARBOPROP^® principally includes ceramic proppant manufactured by Saint-Gobain and Curimbaba. The Company’s CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^® products compete primarily with ceramic proppant produced by Saint-Gobain and Curimbaba and with sand-based proppant for use in the hydraulic fracturing of medium depth natural gas and oil wells. The leading suppliers of mined sand are Unimin Corp., Badger Mining Corp., Fairmount Minerals Limited, Inc., and Ogelbay-Norton Company. The leading suppliers of resin-coated sand are Hexion Specialty Chemicals, Inc. and Santrol, a subsidiary of Fairmount Minerals.

The Company believes that the most significant factors that influence a customer’s decision to purchase the Company’s ceramic proppant are (i) price/performance ratio, (ii) on-time delivery performance, (iii) technical support and (iv) proppant availability. The Company believes that its products are competitively priced and that its delivery performance is excellent. The Company also believes that its superior technical support has enabled it to persuade customers to use ceramic proppant in an increasingly broad range of applications and thus increased the overall market for the Company’s products. Since 1993, the Company has consistently expanded its manufacturing capacity and plans to continue its strategy of adding capacity, as needed, to meet anticipated future increases in sales demand.

 

The Company continually conducts testing and development activities with respect to alternative raw materials to be used in the Company’s existing and alternative production methods. For information regarding the Company’s research and development expenditures see Note 1 to the “Notes to Consolidated Financial Statements.” The Company is actively involved in the development of alternative products for use as proppant in the hydraulic fracturing process and is aware of others engaged in similar development activities. The Company believes that while there are potential specialty applications for these products, they will not significantly impact the use of ceramic proppants. The Company believes that the “know-how” and trade secrets necessary to efficiently manufacture a product of consistently high quality are difficult barriers to entry to overcome.

 

Customers and Marketing

 

The Company’s largest customers are participants in the petroleum pressure pumping industry. Specifically, Halliburton Energy Services, Inc. and Schlumberger Limited each accounted for more than 10% of the Company’s 2010 and 2009 revenues. However, the end users of the Company’s products are the operators of natural gas and oil wells that hire the pressure pumping service companies to hydraulically fracture wells. The Company works both with the pressure pumping service companies and directly with the operators of natural gas and oil wells to present the technical and economic advantages of using ceramic proppant. The Company generally supplies its customers with products on a just-in-time basis, as specified in individual purchase orders. Continuing sales of product depend on the Company’s direct customers and the well operators being satisfied with product quality, availability and delivery performance. The Company provides its software simulation products and consulting services directly to owners and/or operators of oil and gas wells.

 

The Company recognizes the importance of a technical marketing program in demonstrating long-term economic advantages when selling products and services that offer financial benefits over time. The Company has a broad technical sales force to advise end users on the benefits of using ceramic proppant and performing fracture simulation and consultation services.

 

Although the Company’s initial products were originally intended for use in deep wells that require high-strength proppant, the Company believes that there is economic benefit to well operators of using ceramic proppant in shallower wells that do not necessarily require a high-strength proppant. The Company believes that its new product introductions and education-based technical marketing efforts have allowed it to capture a greater portion of the market for sand-based proppant in recent years and will continue to do so in the future.

 

The Company provides a variety of technical support services and has developed computer software that models the return on investment achievable by using the Company’s ceramic proppant versus alternatives in the hydraulic fracturing of a natural gas or oil well. In addition to the increased technical marketing effort, the Company from time to time engages in field trials to demonstrate the economic benefits of its products and validate the findings of its computer simulations. Periodically, the Company provides proppant to production companies for field trials, on a discounted basis, in exchange for a production company’s agreement to provide production data for direct comparison of the results of fracturing with ceramic proppant as compared to alternative proppants.

 

The Company’s international marketing efforts are conducted primarily through its sales offices in Dubai, United Arab Emirates; Aberdeen, Scotland; Beijing, China; and Moscow, Russia, and through commissioned sales agents located in South America and China. The Company’s products and services are used worldwide by U.S. customers operating domestically and abroad, and by foreign customers. Sales outside the United States accounted for 23%, 24% and 29% of the Company’s sales for 2010, 2009 and 2008, respectively. The decrease in the proportion of international sales is primarily attributable to increased demand in the U.S. as well as expanded

production capacities in the U.S. The distribution of the Company’s international and domestic revenues is shown below, based upon the region in which the customer used the products and services:

 

 

Production Capacity

 

The Company believes that constructing adequate capacity ahead of demand while incorporating new technology to reduce manufacturing costs are important competitive strategies to increase its overall share of the market for proppant.

 

In early 2006, the Company completed construction of a manufacturing facility in Toomsboro, Georgia. A second production line at this facility was completed in the fourth quarter of 2007 and commenced operations in January 2008. During the fourth quarter of 2010, the third production line at this facility commenced operations. The Company is currently constructing a fourth production line, which is expected to add additional production capacity of 250 million pounds per year and anticipates that it will be completed by the end of 2011. The construction of additional manufacturing capacity will be dependent on the expected future demand for the Company’s products and the ability to obtain necessary environmental permits.

 

During 2008, the Company idled ceramic proppant production at its New Iberia facility originally constructed in 1978. The Company’s decision to idle production at this facility was based on the rising cost of imported raw material and the small scale of the New Iberia facility. Production resumed for a short period until being idled again in 2009. The facility continues to function as a distribution center and the Company has built a resin coating plant within the existing manufacturing infrastructure of the facility. The resin coating plant, which began production in 2010, is utilized to coat ceramic proppant manufactured at other Company locations and sand. A second production line is currently under construction at the facility and is expected to be completed by the end of 2011. Once completed, the New Iberia facility is expected to be capable of resin coating up to 400 million pounds of proppant per year.

 

The following table sets forth the current stated capacity of each of the Company’s existing manufacturing and resin coating facilities:

 

 

 

 

The Company generally supplies its domestic pumping service customers with products on a just-in-time basis and operates without any material backlog.

Long-Lived Assets By Geographic Area

 

Long-lived assets, consisting of net property, plant and equipment, goodwill, intangibles, and other long-term assets as of December 31 in the United States and other countries are as follows:

 

 

Distribution

 

The Company maintains finished goods inventories at each of its manufacturing facilities and at remote stocking facilities. The North American remote stocking facilities consist of bulk storage silos with truck trailer loading facilities, as well as rail yards for direct transloading from rail car to tank trucks. International remote stocking sites are duty-free warehouses operated by independent owners. North American sites are typically supplied by rail, and international sites are typically supplied by container ship. In total, the Company leases approximately 1,100 rail cars for use in the distribution of its products. The price of the Company’s products sold for delivery in the lower 48 United States and Canada includes just-in-time delivery of proppant to the operator’s well site, which eliminates the need for customers to maintain an inventory of ceramic proppant.

 

Raw Materials

 

Ceramic proppant is made from alumina-bearing ores (commonly referred to as clay, bauxite, bauxitic clay or kaolin, depending on the alumina content) that are readily available on the world market. Bauxite is largely used in the production of aluminum metal, refractory material and abrasives. The main known deposits of alumina-bearing ores in the United States are in Arkansas, Alabama and Georgia; other economically mineable known deposits are located in Australia, Brazil, China, Gabon, Guyana, India, Jamaica, Russia and Surinam.

 

For the production of CARBOHSP^® and CARBOPROP^® in the United States the Company uses bauxite, and has historically purchased its annual requirements at the seller’s current prices. The Company maintains multi-year agreements with both a domestic and an international supplier for a portion of its annual bauxite requirement and the Company believes that these agreements will sufficiently provide for its bauxite needs in 2011. The Company is evaluating alternative suppliers for future bauxite requirements.

 

The Company’s Eufaula, McIntyre and Toomsboro facilities primarily use locally mined kaolin for the production of CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^®. The Company has entered into a bi-lateral contract that requires a supplier to sell to the Company, and the Company to purchase from the supplier, a majority of the Eufaula facility’s annual kaolin requirements through 2013, with options to extend this agreement for an additional six years. The Company has obtained ownership rights in acreage in Wilkinson County, Georgia, which contains in excess of a fifteen year supply of kaolin for its Georgia facilities at current production rates. The Company has entered into a long-term agreement with a third party to mine and transport this material at a fixed price subject to annual adjustment. The agreement requires the Company to utilize the third party to mine and transport a majority of the McIntyre facility’s annual kaolin requirement.

 

The Company’s production facility in Luoyang, China, uses both kaolin and bauxite for the production of CARBOPROP^® and CARBOLITE^®. Certain of these materials are purchased under a long-term contract that stipulates fixed prices subject to periodic adjustment and provides for minimum purchase requirements.

 

The Company’s production facility in Kopeysk, Russia currently uses bauxite for the production of CARBOPROP^®. Bauxite is purchased under annual agreements that stipulate fixed prices for up to a specified quantity of material.

Production Process

 

Ceramic proppants are made by grinding or dispersing ore to a fine powder, combining the powder into small pellets and firing the pellets in a rotary kiln. The Company uses two different methods to produce ceramic proppant. The Company’s plants in McIntyre, Georgia; Kopeysk, Russia and Luoyang, China use a dry process, which utilizes clay, bauxite, bauxitic clay or kaolin. The raw material is ground, pelletized and screened. The manufacturing process is completed by firing the product in a rotary kiln.

 

The Company’s plants in Eufaula, Alabama and Toomsboro, Georgia, use a wet process, which starts with kaolin that is formed into slurry. The slurry is then pelletized in a dryer and the pellets are then fired in a rotary kiln.

 

The Company’s rotary kilns are primarily heated by the use of natural gas.

 

Patent Protection and Intellectual Property

 

The Company makes ceramic proppant and ceramic media used in foundry and scouring processes (the later two items comprising a minimal volume of overall sales) by processes and techniques that involve a high degree of proprietary technology, some of which is protected by patents.

 

The Company owns nine U.S. patents, three Russian patents, five Eurasian patents, one Canadian patent, one Saudi Arabian patent and one Mexican patent. One of the Company’s U.S. patents and the Canadian patent relate to a low-apparent specific gravity ceramic proppant, and will expire in 2022 through 2023. Two of the Company’s U.S. patents and the Saudi Arabian patent relate to TiO₂ scouring media, a titanium-based media used in scouring processes, and will expire in 2023 through 2045. One of the Company’s U.S. patents and one of the Eurasian patents relate to the spray drying of proppant and will expire in 2025. Five of the Company’s U.S. patents, four of the Eurasian patents, the Mexican patent and the three Russian patents relate to lightweight and intermediate strength proppants and will expire in 2025 through 2028. The three Russian patents relate to proppant that is produced in the Company’s Russian manufacturing facility.

 

The Company owns seven U.S. patent applications (together with a number of counterpart applications pending in foreign jurisdictions). The U.S. patent applications cover ceramic proppant, processes for making ceramic proppant, and detection of subterranean fractures. The applications are in various stages of the patent prosecution process, and patents may not issue on such applications in any jurisdiction for some time, if they issue at all.

 

The Company believes that its patents have been important in enabling the Company to compete in the market to supply proppant to the natural gas and oil industry, although important patents expired in 2006 and 2009. The Company intends to enforce, and has in the past vigorously enforced, its patents. The Company may from time to time in the future be involved in litigation to determine the enforceability, scope and validity of its patent rights. In addition to patent rights, and perhaps more notably, the Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. None of this “know-how” and technology is licensed from third parties.

 

Falcon Technologies, through the acquisition of substantially all of the assets of BBL Falcon Industries, Ltd. in 2009, owns one U.S. patent, which expires in 2027 and relates to construction of secondary containment areas, and five U.S patent applications (together with a number of counterpart applications pending in foreign jurisdictions) that relate to tank bases, load bearing products, anchoring systems, and methods of constructing secondary containment areas.

 

Environmental and Other Governmental Regulations

 

The Company believes that its operations are in substantial compliance with applicable domestic and foreign federal, state and local environmental and safety laws and regulations. However, in January 2007, following self-disclosure of certain air pollution emissions, the Company received a Notice of Violation (“NOV”) from the State of Georgia Environmental Protection Division (“EPD”) regarding appropriate permitting for emissions of substances from its Toomsboro and McIntyre facilities. In May 2009, the Company entered into a consent order with the EPD

to resolve the Toomsboro and McIntyre NOVs. Pursuant to the Consent Order, the Company has paid the EPD fines of $378,000.

 

In response to the NOVs, and its desire to expand its production capacities at both facilities, the Company also submitted Prevention of Significant Deterioration (“PSD”) permit applications for both facilities in June 2008. Permits for both facilities were obtained in December 2009.

 

Existing federal Environmental requirements such as the Clean Air Act and the Clean Water Act, as amended, impose certain restrictions on air and water pollutants from the Company’s operations via permits and regulations. Those pollutants include volatile organic compounds, nitrogen oxides, sulfur dioxide, particulates, storm water and wastewater discharges and other by-products. In addition to meeting environmental requirements for existing operations, the Company must also demonstrate compliance with environmental regulations in order to obtain permits prior to any future expansion. The Environmental Protection Agency (“EPA”) and state programs require covered facilities to obtain individual permits or have coverage under an EPA general permit issued to groups of facilities. A number of federal and state agencies, including but not limited to, the EPA, the Texas Commission of Environmental Quality, the Louisiana Department of Natural Resources, the Alabama Department of Environmental Management, and the Georgia Environmental Protection Division, in states in which we do business, have environmental regulations applicable to our operations. Historically we have been able to obtain permits, where necessary, to build new facilities and modify existing facilities that allow us to continue compliant operations.

 

Employees

 

At December 31, 2010, the Company had 806 employees worldwide. In addition to the services of its employees, the Company employs the services of consultants as required. The Company’s employees are not represented by labor unions. There have been no work stoppages or strikes during the last three years that have resulted in the loss of production or production delays. The Company believes its relations with its employees are satisfactory.

 

Executive Officers of the Registrant

 

Gary A. Kolstad (age 52) was elected in June 2006, by the Company’s Board of Directors to serve as President and Chief Executive Officer and a Director of the Company. Mr. Kolstad previously served in a variety of positions over 21 years with Schlumberger, Ltd. Mr. Kolstad became a Vice President of Schlumberger, Ltd. in 2001, where he last held the positions of Vice President, Oilfield Services — U.S. Onshore and Vice President, Global Accounts.

 

Ernesto Bautista III (age 39) joined the Company as a Vice President and Chief Financial Officer in January 2009. From July 2006 until joining the Company, Mr. Bautista served as Vice President and Chief Financial Officer of W-H Energy Services, Inc., a Houston, Texas based diversified oilfield services company (“W-H Energy”). From July 2000 to July 2006, he served as Vice President and Corporate Controller of W-H Energy. From September 1994 to May 2000, Mr. Bautista served in various positions at Arthur Andersen LLP, most recently as a manager in the assurance practice, specializing in emerging, high growth companies. Mr. Bautista is a certified public accountant in the State of Texas.

 

Mark L. Edmunds (age 55) has been the Vice President, Operations since April 2002. From 2000 until joining the Company, Mr. Edmunds served as Business Unit Manager and Plant Manager for FMC Corporation. Prior to 2000, Mr. Edmunds served Union Carbide Corporation and The Dow Chemical Company in a variety of management positions, including Director of Operations, Director of Internal Consulting and Manufacturing Operations Manager.

 

David G. Gallagher (age 52) was appointed Vice President, Marketing and Sales in April 2007. Mr. Gallagher previously held a variety of both domestic and international managerial positions in engineering, marketing and sales, and technology development over a 26 year period with Schlumberger, Ltd., where from 1999 until 2002 he served as the Director of Marketing for U.S. Land and from 2002 until 2007, he served as Director of Marketing for Venezuela, Trinidad and the Caribbean.

 

R. Sean Elliott (age 36) joined the Company in November 2007 as General Counsel, and was appointed as Corporate Secretary and Chief Compliance Officer in January 2008. Previously, Mr. Elliott served as legal counsel

to Aviall, Inc. (an international aviation company) from 2004 to 2007, where he last held the positions of Assistant General Counsel and Assistant Secretary. From 1999 until 2004, Mr. Elliott practiced law with Haynes and Boone, LLP, a Dallas, Texas-based law firm.

 

All officers are elected for one-year terms or until their successors are duly elected. There are no arrangements between any officer and any other person pursuant to which he was selected as an officer. There is no family relationship between any of the named executive officers or between any of them and the Company’s directors.

 

Forward-Looking Information

 

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. This Form 10-K, the Company’s Annual Report to Shareholders, any Form 10-Q or any Form 8-K of the Company or any other written or oral statements made by or on behalf of the Company may include forward-looking statements which reflect the Company’s current views with respect to future events and financial performance. The words “believe”, “expect”, “anticipate”, “project”, “estimate”, “forecast”, “plan” or “intend” and similar expressions identify forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, each of which speaks only as of the date the statement was made. The Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. The Company’s forward-looking statements are based on assumptions that we believe to be reasonable but that may not prove to be accurate. All of the Company’s forward-looking information is subject to risks and uncertainties that could cause actual results to differ materially from the results expected. Although it is not possible to identify all factors, these risks and uncertainties include the risk factors discussed below.

 

The Company’s results of operations could be adversely affected if its business assumptions do not prove to be accurate or if adverse changes occur in the Company’s business environment, including but not limited to:

 

 

The Company’s results of operations could also be adversely affected as a result of worldwide economic, political and military events, including war, terrorist activity or initiatives by the Organization of the Petroleum Exporting Countries (“OPEC”). For further information, see “Item 1A. Risk Factors.”

 

Available Information

 

The Company’s annual reports on Form 10-K, proxy statements, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 (“Exchange Act”) are made available free of charge on the Company’s internet

website at http://www.carboceramics.com as soon as reasonably practicable after such material is filed with, or furnished to, the Securities and Exchange Commission (“SEC”).

 

The public may read and copy any materials that the Company files with the SEC at the SEC’s Public Reference Room at 100 F Street, Room 1580, N.E., Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, at http://www.sec.gov.

 

 

You should consider carefully the trends, risks and uncertainties described below and other information in this Form 10-K and subsequent reports filed with the SEC before making any investment decision with respect to our securities. If any of the following trends, risks or uncertainties actually occurs or continues, our business, financial condition or operating results could be materially adversely affected, the trading prices of our securities could decline, and you could lose all or part of your investment.

 

Our business and financial performance depend on the level of activity in the natural gas and oil industries.

 

Our operations are materially dependent upon the levels of activity in natural gas and oil exploration, development and production. More specifically, the demand for our products is closely related to the number of natural gas and oil wells completed in geologic formations where ceramic proppants are used in fracture treatments. These activity levels are affected by both short-term and long-term trends in natural gas and oil prices. In recent years, natural gas and oil prices and, therefore, the level of exploration, development and production activity, have experienced significant fluctuations. Worldwide economic, political and military events, including war, terrorist activity, events in the Middle East and initiatives by OPEC, have contributed, and are likely to continue to contribute, to price volatility. Additionally, warmer than normal winters in North America and other weather patterns may adversely impact the short-term demand for natural gas and, therefore, demand for our products and services. Natural gas and oil prices experienced a decline in the second half of 2008 and during portions of 2009. A prolonged reduction in natural gas and oil prices would generally depress the level of natural gas and oil exploration, development, production and well completions activity and result in a corresponding decline in the demand for our products. Such a decline could have a material adverse effect on our results of operations and financial condition.

 

Our business and financial performance could suffer if new processes are developed to replace hydraulic fracturing or as a result of increased regulation of hydraulic fracturing.

 

Substantially all of our products are proppants used in the completion and re-completion of natural gas and oil wells through the process of hydraulic fracturing. The development of new processes for the completion of natural gas and oil wells leading to a reduction in, or discontinuation of the use of, hydraulic fracturing could cause a decline in demand for our products. Additionally, increased regulation of hydraulic fracturing could negatively affect our business by increasing the costs of compliance, which could cause operators to abandon the process altogether due to commercial impracticability. Either of these events could have a material adverse effect on our results of operations and financial condition.

 

We may be adversely affected by decreased demand for ceramic proppant or the development by our competitors of effective alternative proppants.

 

Ceramic proppant is a premium product capable of withstanding higher pressure and providing more highly conductive fractures than mined sand, which is the most commonly used proppant type. Although we believe that the use of ceramic proppant generates higher production rates and more favorable production economics than mined sand, a significant shift in demand from ceramic proppant to mined sand could have a material adverse effect on our results of operations and financial condition. The development and use of effective alternative proppant could also cause a decline in demand for our products, and could have a material adverse effect on our results of operations and financial condition.

We rely upon, and receive a significant percentage of our revenues from, a limited number of key customers.

 

During 2010, our key customers included several of the largest participants in the worldwide petroleum pressure pumping industry. Although the end users of our products are numerous operators of natural gas and oil wells that hire pressure pumping service companies to hydraulically fracture wells, two customers accounted collectively for approximately 53% of our 2010 revenues. We generally supply our domestic pumping service customers with products on a just-in-time basis, with transactions governed by individual purchase orders. Continuing sales of product depend on our direct customers and the end user well operators being satisfied with product quality, availability and delivery performance. Although we believe our relations with our customers and the major well operators are satisfactory, a material decline in the level of sales to any one of our major customers due to unsatisfactory product performance, delivery delays or any other reason could have a material adverse effect on our results of operations and financial condition.

 

We provide environmental warranties on certain of our containment and spill prevention products.

 

Falcon Technologies’ tank liners, secondary containments and related products and services are designed to contain or avoid spills of hydrocarbons and other materials. If a release of these materials occurs, it could be harmful to the environment. Although we attempt to negotiate appropriate limitations of liability in the applicable terms of sale, some customers have required expanded warranties, indemnifications or other terms that could hold Falcon Technologies responsible in the event of a spill or release under particular circumstances. If Falcon Technologies is held responsible for a spill or release of materials from one of its customer’s facilities, it could have a material adverse effect on our results of operations and financial condition.

 

Third parties may claim that we are infringing their intellectual property rights.

 

The Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. Although the Company does not believe that it is infringing upon the intellectual property rights of others by using such proprietary information and technology, it is possible that such a claim will be asserted against the Company in the future. In the event any third party makes a claim against us for infringement of patents or other intellectual property rights of a third party, such claims, with or without merit, could be time-consuming and result in costly litigation. In addition, the Company could experience loss or cancellation of customer orders, experience product shipment delays, or be subject to significant liabilities to third parties. If our products or services were found to infringe on a third party’s proprietary rights, the Company could be required to enter into royalty or licensing agreements to continue selling its products or services. Royalty or licensing agreements, if required, may not be available on acceptable terms, if at all, which could seriously harm our business. Involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets and expertise could have a material adverse effect on the Company’s business.

 

We operate in an increasingly competitive market.

 

We compete with other principal suppliers of ceramic proppant, as well as with suppliers of sand and resin-coated sand for use as proppant, in the hydraulic fracturing of natural gas and oil wells. The proppant market is highly competitive and no one supplier is dominant. The recent expiration of key patents owned by the Company has resulted in additional competition in the market for ceramic proppant. This entry of additional competitors into the market to supply ceramic proppant could have a material adverse effect on our results of operations and financial condition.

 

Significant increases in fuel prices for any extended periods of time will increase our operating expenses.

 

The price and supply of natural gas are unpredictable, and can fluctuate significantly based on international, political and economic circumstances, as well as other events outside our control, such as changes in supply and demand due to weather conditions, actions by OPEC and other oil and gas producers, regional production patterns and environmental concerns. Natural gas is a significant component of our direct manufacturing costs and price escalations will likely increase our operating expenses and can have a negative impact on income from operations

and cash flows. We operate in a competitive marketplace and may not be able to pass through all of the increased costs that could result from an increase in the cost of natural gas.

 

Environmental compliance costs and liabilities could reduce our earnings and cash available for operations.

 

We are subject to increasingly stringent laws and regulations relating to environmental protection, including laws and regulations governing air emissions, water discharges and waste management. The technical requirements of complying with these environmental laws and regulations are becoming increasingly expensive and complex, and may affect the Company’s ability to expand its operations. Our ability to continue the expansion of our manufacturing capacity to meet market demand is contingent upon obtaining required environmental permits and compliance with their terms. We incur, and expect to continue to incur, capital and operating costs to comply with environmental laws and regulations.

 

In addition, we use some hazardous substances and generate certain industrial wastes in our operations. Many of our current and former properties are or have been used for industrial purposes. Accordingly, we could become subject to potentially material liabilities relating to the investigation and cleanup of contaminated properties, and to claims alleging personal injury or property damage as the result of exposures to, or releases of, hazardous substances. These laws also may provide for “strict liability” for damages to natural resources or threats to public health and safety. Strict liability can render a party liable for environmental damage without regard to negligence or fault on the part of the party. Some environmental laws provide for joint and several strict liability for remediation of spills and releases of hazardous substances.

 

Stricter enforcement of existing laws and regulations, new laws and regulations, the discovery of previously unknown contamination or the imposition of new or increased requirements could restrict our expansion efforts, require us to incur costs, or become the basis of new or increased liabilities. Any of these events could reduce our earnings and our cash available for operations.

 

Our international operations subject us to risks inherent in doing business on an international level that could adversely impact our results of operations.

 

International revenues accounted for approximately 23%, 24% and 29% of our total revenues in 2010, 2009 and 2008, respectively. We cannot assure you that we will be successful in overcoming the risks that relate to or arise from operating in international markets. Risks inherent in doing business on an international level include, among others, the following:

 

 

In particular, we are subject to risks associated with our production facilities in Luoyang, China, and Kopeysk, Russia. The legal systems in both China and Russia are still developing and are subject to change. Accordingly, our operations and orders for products in both countries could be adversely impacted by changes to or interpretation of

each country’s law. Further, if manufacturing in either region is disrupted, our overall capacity could be significantly reduced and sales and/or profitability could be negatively impacted.

 

The manufacture of resin-coated sand is a new process for us.

 

Resin-coated sand is an alternative to the Company’s traditional ceramic proppant and involves a different manufacturing process. Commercialization of resin-coated sand involves capital expenditures and new operational requirements. If we are unable to secure adequate, cost effective supply commitments for the raw materials associated with resin-coated sand or if we are unable to successfully and efficiently construct the needed additional manufacturing capacity and infrastructure to produce resin-coated sand, our ability to sell this product to the marketplace may be adversely impacted. A lack of sales of resin-coated sand could have a material adverse effect on our results from operations and financial condition.

 

Undetected defects in our fracture simulation software could adversely affect our business.

 

Despite extensive testing, our software could contain defects, bugs or performance problems. If any of these problems are not detected, the Company could be required to incur extensive development costs or costs related to product recalls or replacements. The existence of any defects, errors or failures in our software products may subject us to liability for damages, delay the development or release of new products and adversely affect market acceptance or perception of our software products or related services, any one of which could materially and adversely affect the Company’s business, results of operations and financial condition.

 

The market price of our common stock will fluctuate, and could fluctuate significantly.

 

The market price of the Company’s common stock will fluctuate, and could fluctuate significantly, in response to various factors and events, including the following:

 

 

Our actual results could differ materially from results anticipated in forward-looking statements we make.

 

Some of the statements included or incorporated by reference in this Form 10-K are forward-looking statements. These forward-looking statements include statements relating to trends in the natural gas and oil industries, the demand for ceramic proppant and our performance in the “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and “Business” sections of this Form 10-K. In addition, we have made and may continue to make forward-looking statements in other filings with the SEC, and in written material, press releases and oral statements issued by us or on our behalf. Forward-looking statements include statements regarding the intent, belief or current expectations of the Company or its officers. Our actual results could differ materially from those anticipated in these forward-looking statements. (See “Business — Forward-Looking Information.”)

 

 

Not applicable.

 

The Company maintains its corporate headquarters (approximately 27,000 square feet of leased office space) in Houston. The Company also leases approximately 15,000 square feet of space for its Technology center in Houston. The Company owns its manufacturing facilities, land and substantially all of the related production equipment in New Iberia, Louisiana and Eufaula, Alabama, and leases its McIntyre and Toomsboro, Georgia, facilities. The Company owns the buildings and production equipment at its facility in Luoyang, China, and has been granted use of the land on which the facility is located through 2051 under the terms of a land use agreement with the People’s Republic of China. The Company owns the buildings and production equipment at its facility in Kopeysk, Russia, and substantially all of the land on which the facility is located. The Company leases space for sales offices in Aberdeen, Scotland, Moscow, Russia, and Dubai, UAE.

 

The New Iberia, Louisiana facility is located on 26.7 acres of land owned by the Company and consists of two resin coating units (one of which is under construction), a laboratory, two office buildings and a warehouse, collectively totaling approximately 197,000 square feet. The Eufaula, Alabama facility is located on 14 acres of land owned by the Company and consists of one production unit, a laboratory and an office, collectively totaling approximately 113,700 square feet.

 

The facilities in McIntyre and Toomsboro, Georgia, include real property, plant and equipment that are leased by the Company from the Development Authority of Wilkinson County. The original lease was executed in 1997 and was last amended in 2008. The term of the current lease, which covers both locations, commenced on November 1, 2008, and terminates on November 1, 2013, subject to the Company’s ability to renew the lease through November 2021. Under the terms of the lease, the Company is responsible for all costs incurred in connection with the premises, including costs of construction of the plant and equipment. As an inducement to locate the facility in Wilkinson County, Georgia, the Company received certain ad-valorem property tax incentives. At the termination of the lease, title to all of the real property, plant and equipment is to be conveyed to the Company in exchange for nominal consideration. The Company has the right to purchase the property, plant and equipment at any time during the term of the lease for a nominal price.

 

The facility in McIntyre, Georgia is located on approximately 36 acres of land and consists of various production and support buildings, a laboratory building, a warehouse building and an administrative building, collectively totaling approximately 196,100 square feet. The facility in Toomsboro, Georgia is located on approximately 13 acres of an approximately 1,100-acre tract of property leased by the Company. The facility consists of various production and support buildings, two laboratory buildings, and an administrative building, collectively totaling approximately 113,900 square feet.

 

The facility in Luoyang, China is located on approximately 11 acres and consists of various production and support buildings, a laboratory, and two administrative buildings, collectively totaling approximately 118,000 square feet. The facility in Kopeysk, Russia is located on approximately 60 acres of land and consists of various production and support buildings and an administrative building, collectively totaling approximately 103,000 square feet.

 

In December 2010, the Company purchased approximately 39 acres of land and approximately 429,000 square feet of buildings in Marshfield, Wisconsin and is currently holding the land and buildings for prospective use as a resin-coated sand manufacturing facility.

 

The Company owns or otherwise utilizes distribution facilities in multiple locations around the world. See “Item 1. Business — Distribution.”

 

Applied Geomechanics, Inc. leases office space in San Francisco, California (approximately 7,000 square feet).

 

The Company owns approximately 2,630 acres of land and leasehold interests in Wilkinson County, Georgia, near its plants in McIntyre and Toomsboro, Georgia and approximately 80 acres of leasehold interests in Barbour County, Alabama, near its plant in Eufaula, Alabama. The land contains raw material for use in the production of the Company’s lightweight ceramic proppants. The Company has contracted with a third party to mine and haul the reserves and bear the responsibility for subsequent reclamation of the mined areas.

Falcon Technologies owns its service facility located in Decatur, Texas, which is located on approximately 25 acres of land. The facility includes production and administrative buildings totaling approximately 12,000 square feet. Falcon Technologies also leases a service facility in Midland, Texas consisting of 18 acres of land and approximately 2,000 square feet of buildings.

 

 

From time to time, the Company is the subject of legal proceedings arising in the ordinary course of business. The Company does not believe that any of these proceedings will have a material effect on its business or its results of operations.

 

Our U.S. manufacturing facilities process mined minerals, and therefore are viewed as mine operations subject to regulation by the federal Mine Safety and Health Administration under the Federal Mine Safety and Health Act of 1977. Information concerning mine safety violations or other regulatory matters required by section 1503(a) of the Dodd-Frank Wall Street Reform and Consumer Protection Act and the recently proposed Item 106 of Regulation S-K (17 CFR 229.106) is included in Exhibit 99.1 to this annual report.

 

 

 

Common Stock Market Prices, Dividends and Stock Repurchases

 

The Company’s common stock is traded on the New York Stock Exchange (ticker symbol CRR). The number of record and beneficial holders of the Company’s common stock as of February 17, 2011 was approximately 22,050.

 

The following table sets forth the high and low sales prices of the Company’s common stock on the New York Stock Exchange and dividends for the last two fiscal years:

 

 

 

 

The Company currently expects to continue its policy of paying quarterly cash dividends, although there can be no assurance as to future dividends because they depend on future earnings, capital requirements and financial condition.

 

On August 28, 2008, the Company’s Board of Directors authorized the repurchase of up to two million shares of the Company’s common stock. Shares are effectively retired at the time of purchase. The Company did not repurchase any shares under this plan during the fourth quarter of 2010. As of December 31, 2010, the Company has repurchased and retired 1,762,576 shares at an aggregate price of $65.9 million.

The following table provides information about the Company’s repurchases of common stock during the quarter ended December 31, 2010:

 

ISSUER PURCHASES OF EQUITY SECURITIES

 

 

 

Stock Performance Graph

 

The following graph compares the cumulative shareholder return on the Company’s common stock versus the total cumulative return on the S&P 500 Stock Index and the S&P Small Cap 600, Oil & Gas Equipment & Services Sub-Industry Group. The comparison assumes $100 was invested as of December 31, 2005 and all dividends were reinvested.

 

COMPARISON OF 5 YEAR CUMULATIVE TOTAL RETURN*
Among CARBO Ceramics, Inc. the S&P 500 Index
and the S&P SmallCap 600 — Oil & Gas Equipment & Services Index

 

 

 

The following selected financial data are derived from the audited consolidated financial statements of the Company. The data should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and notes thereto included elsewhere in this Form 10-K. The Company has determined that its outstanding non-vested restricted stock awards are participating securities. Accordingly, effective January 1, 2009, earnings per common share are computed using the two-class method prescribed by ASC Topic 260 “Earnings Per Share.” All previously reported earnings per common share data were retrospectively adjusted to conform to the new computation method.

 

 

 

 

 

 

Executive Level Overview

 

CARBO Ceramics Inc. generates revenue primarily through the sale of products and services to the oil and gas industry. The Company’s principal business consists of manufacturing and selling ceramic proppant for use primarily in the hydraulic fracturing of oil and natural gas wells. On August 28, 2008, the Company entered into a definitive agreement to sell a substantial portion of the assets of its wholly-owned subsidiary, Pinnacle Technologies, Inc. (“Pinnacle”). The sale, which includes all of the fracture and reservoir diagnostic business, the Pinnacle name and related trademarks, was completed on October 10, 2008. The Company has no continuing involvement in these operations. The operations associated with this sale have been classified as income from discontinued operations in the accompanying consolidated statements of income and the cash flows associated with discontinued operations have been segregated in the accompanying consolidated statements of cash flows. The Company retained the hydraulic fracturing simulation software FracPro^®, the hydraulic fracturing design, engineering and consulting business and Applied Geomechanics, Inc., a provider of geotechnical monitoring applications.

 

In October 2009, Falcon Technologies, a wholly-owned subsidiary of the Company, purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention, containment and countermeasure systems for the oil and gas industry. The acquisition was made for the purpose of expanding the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide products

that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

 

During 2010, the Company began production of resin coated ceramic (CARBOBOND^® LITE^®) and resin coated sand (CARBOBOND^® RCS) proppants. The introduction of CARBOBOND^® LITE^® addresses a market in which oil and natural gas wells are subject to a high risk of proppant flow-back. The adhesive property of the resin allows the ceramic proppant pack to adhere in place and therefore reduce the risk of proppant flow-back. In the case of CARBOBOND^® RCS, the Company made the strategic decision to offer a lower cost, lower conductivity alternative to its ceramic proppants thereby broadening its proppant suite of products. Management of the Company believes that this is a natural extension of our core business and enhances our highly conductive proppant offering.

 

The Company’s products and services help oil and gas producers increase production and recovery rates from their wells, thereby lowering overall reservoir development costs. As a result, the Company’s business is dependent to a large extent on the level of drilling activity in the oil and gas industry worldwide. However, the Company has increased its revenues and income over a multiple-year period and across various industry business cycles by increasing its share of the worldwide market for all types of proppant. Although the Company’s ceramic proppants are more expensive than alternative non-ceramic proppants, the Company has been able to demonstrate the cost-effectiveness of its products to numerous operators of oil and gas wells through increased technical marketing activity. The Company believes its future prospects benefit from both an increase in drilling activity worldwide and the desire of industry participants to improve production results and lower their overall development costs.

 

The Company believes international operations will continue to represent an important role in its future growth. In 2002, the Company constructed its first manufacturing facility located outside the United States in the city of Luoyang, China and completed a second production line in 2004 that doubled the capacity of that facility. In 2004, the Company also opened a sales office in Moscow, Russia and established distribution operations in the country. In 2005, the Company broke ground on a new manufacturing facility in the city of Kopeysk, Russia and completed construction of this new facility during the first half of 2007. International revenues represented 23%, 24% and 29% of total revenues in 2010, 2009 and 2008, respectively.

 

Management believes the addition of new manufacturing capacity is critical to the Company’s ability to continue its long-term growth in sales volume and revenue for ceramic proppant. In regards to future expansion, the Company has recently completed the construction of a third production line at its Toomsboro facility that began operations in December 2010 and the fourth production line is expected to be completed before the end of 2011 with an annual capacity of 250 million pounds. Although the Company has operated near or at full capacity at times during the previous ten years, the addition of significant new capacity could adversely impact operating profit margins if the timing of this new capacity does not match increases in demand for the Company’s products. In addition, the ability to construct new capacity will be contingent upon the receipt of all needed environmental emission permits. See “Item 1 — Business” and “Item 1A — Risk Factors”

 

Operating profit margin for the Company’s proppant business is principally impacted by manufacturing costs and the Company’s production levels as a percentage of its capacity. Although most direct production expenses have been relatively stable or predictable over time, the Company has experienced volatility in the cost of natural gas, which is used in production by the Company’s domestic manufacturing facilities, and bauxite, which is the primary raw material for production of the Company’s high strength ceramic proppant. The cost of natural gas has been a significant component of total monthly domestic direct production expense over the last three years. In an effort to mitigate volatility in the cost of natural gas purchases and reduce exposure to short term spikes in the price of this commodity, the Company contracts in advance for portions of its future natural gas requirements. Despite the efforts to reduce exposure to changes in natural gas prices, it is possible that, given the significant portion of manufacturing costs represented by this item, gross margins as a percentage of sales may decline and changes in net income may not directly correlate to changes in revenue. During 2007, the Company’s long-standing supplier of high strength raw materials exited the business. These materials are used to manufacture high-strength products, CARBOPROP^® and CARBOHSP^®, at the McIntyre, Georgia facility. The delivered cost of bauxite, which represents up to half of the cost of high strength products, has increased since the Company’s long-standing supplier exited the business. Given the current shift in demand to more lightweight products, management anticipates its current supplies of

bauxite will be sufficient for 2011, but continues to pursue a long-term source of these materials to complement its strong position in lightweight raw material supplies.

 

As the Company has expanded its operations in both domestic and international markets, there has been an increase in activities and expenses related to marketing, distribution, research and development, and finance and administration. As a result, selling, general and administrative expenses have increased in recent years. In the future, the Company expects to continue to actively pursue new business opportunities by:

 

 

The Company expects that these activities will generate increased revenue. Selling, general and administrative expenses, however, may continue to increase in 2011 from 2010 levels as the Company continues to expand its operations.

 

General Business Conditions

 

The Company’s proppant business is impacted by the number of natural gas wells drilled in North America, where the majority of wells are hydraulically fractured. In markets outside North America, sales of the Company’s products are less dependent on natural gas markets but are influenced by the overall level of drilling and hydraulic fracturing activity. Furthermore, because the decision to use ceramic proppant is based on comparing the higher initial costs to the future value derived from increased production and recovery rates, the Company’s business is influenced by the current and expected prices of natural gas and oil.

 

Worldwide oil and natural gas prices and related drilling activity levels remained very strong from 2004 until the second half of 2008. During the second half of 2008, oil and natural gas prices as well as active drilling rigs in North America declined significantly in connection with declines in many of the world’s economies. During the second half of 2009, the North American drilling rig count improved and appears to have stabilized during 2010. The Company remains cautious with respect to the near-term outlook for natural gas, given the current supply-demand situation. While natural gas fundamentals remain weak, the shift in oilfield activity by the Company’s clients to oily, liquids-rich plays is encouraging and the Company expects demand for ceramic proppant to remain high during 2011. The Company believes its operating results for 2011 will continue to be influenced by the level of natural gas drilling in North America, but expects its ability to demonstrate the value of ceramic proppant relative to alternatives will allow it to continue to generate new sales opportunities.

 

Critical Accounting Policies

 

The Consolidated Financial Statements are prepared in accordance with accounting principles generally accepted in the U.S., which require the Company to make estimates and assumptions (see Note 1 to the Consolidated Financial Statements). The Company believes that, of its significant accounting policies, the following may involve a higher degree of judgment and complexity.

 

Revenue is recognized when title passes to the customer (generally upon delivery of products) or at the time services are performed. The Company generates a significant portion of its revenues and corresponding accounts receivable from sales to the petroleum pressure pumping industry. In addition, the Company generates a significant portion of its revenues and corresponding accounts receivable from sales to two major customers, both of which are in the petroleum pressure pumping industry. As of December 31, 2010, approximately 49% of the balance in trade accounts receivable was attributable to those two customers. The Company records an allowance for doubtful accounts based on its assessment of collectability risk and periodically evaluates the allowance based on a review of trade accounts receivable. Trade accounts receivable are periodically reviewed for collectability based on customers’ past credit history and current financial condition, and the allowance is adjusted, if necessary. If a prolonged economic downturn in the petroleum pressure pumping industry were to occur or, for some other reason, any of the Company’s primary customers were to experience significant adverse conditions, the Company’s estimates of the recoverability of accounts receivable could be reduced by a material amount and the allowance for

doubtful accounts could be increased by a material amount. At December 31, 2010, the allowance for doubtful accounts totaled $1.7 million.

 

The Company values inventory using the weighted average cost method. Assessing the ultimate realization of inventories requires judgments about future demand and market conditions. The Company regularly reviews inventories to determine if the carrying value of the inventory exceeds market value and the Company records an adjustment to reduce the carrying value to market value, as necessary. Future changes in demand and market conditions could cause the Company to be exposed to additional obsolescence or slow moving inventory. If actual market conditions are less favorable than those projected by management, lower of cost or market adjustments may be required.

 

Income taxes are provided for in accordance with ASC Topic 740, “Income Taxes”. This standard takes into account the differences between financial statement treatment and tax treatment of certain transactions. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect of a change in tax rates is recognized as income or expense in the period that includes the enactment date. This calculation requires the Company to make certain estimates about its future operations. Changes in state, federal and foreign tax laws, as well as changes in the Company’s financial condition, could affect these estimates.

 

Long-lived assets, which include net property, plant and equipment, goodwill, intangibles and other long-term assets, comprise a significant amount of the Company’s total assets. The Company makes judgments and estimates in conjunction with the carrying values of these assets, including amounts to be capitalized, depreciation and amortization methods and useful lives. Additionally, the carrying values of these assets are periodically reviewed for impairment or whenever events or changes in circumstances indicate that the carrying amounts may not be recoverable. An impairment loss is recorded in the period in which it is determined that the carrying amount is not recoverable. This requires the Company to make long-term forecasts of its future revenues and costs related to the assets subject to review. These forecasts require assumptions about demand for the Company’s products and services, future market conditions and technological developments. Significant and unanticipated changes to these assumptions could require a provision for impairment in a future period.

 

Results of Operations

 

Net Income

 

 

For the year ended December 31, 2010, the Company reported net income of $78.7 million, an increase of 49% compared to the $52.8 million reported in the previous year. During 2010, operations were favorably impacted by improving fundamentals in the oil and gas industry and continued acceptance of the Company’s products and service offerings. Income from continuing operation in 2010 increased primarily as a result of a 29% increase in proppant sales volume and an increase in the gross profit margin as a percentage of sales, partially offset by higher selling, general and administrative expenses and other operating expenses. Income tax expense in 2010 increased due to higher pretax income.

 

For the year ended December 31, 2009, the Company reported net income of $52.8 million, a decrease of 52% compared to the previous year. Net income in 2008 included $5.8 million of income from discontinued operations and $44.1 million of gain on the disposal of discontinued operations. Discontinued operations relate to the sale of the Company’s fracture and reservoir diagnostics business in 2008.

 

In 2009, income from continuing operations decreased to $52.8 million from $60.4 million in 2008, or 13%. During 2009, the Company experienced a 12% decrease in revenues primarily resulting from lower sales volumes. The decrease in revenue was partially offset by an increase in gross profit margin as a percentage of sales compared to the previous year. Selling, general and administrative expenses increased primarily due to the addition of Falcon

Technologies and the relocation of certain administrative offices. Other operating expenses decreased in 2009 primarily resulting from an impairment charge in 2008 and costs relating to the 2008 start-up of certain manufacturing facilities. Other income in 2009 decreased mainly from foreign currency exchange rate fluctuations and income tax expense in 2009 decreased due to lower taxable income partially offset by a higher effective tax rate.

 

Individual components of financial results are discussed below.

 

Revenues

 

 

Revenues of $473.1 million for the year ended December 31, 2010 increased 38% compared to $341.9 million in 2009. Revenues increased primarily due to a 29% increase in proppant sales volume, a 2% increase in the average proppant selling price and a full year of operations of Falcon Technologies. The Company’s worldwide proppant sales volume totaled 1.348 billion pounds for the year ended December 31, 2010 compared to 1.043 billion pounds for the same period in 2009. North American (defined as Canada and the U.S.) sales volume increased 29% primarily due to an increase in the drilling rig count in the U.S. and Canada as well as continued acceptance of the Company’s products in unconventional resource plays, including shale formations. International (excluding Canada) sales volume increased 31% primarily due to increases in China, Russia, Africa, Latin America and the Middle East, partially offset by a decrease in Mexico. The average selling price per pound of ceramic proppant was $0.322 per pound in 2010 compared to $0.315 per pound in 2009

 

Revenues of $341.9 million for the year ended December 31, 2009 decreased 12% compared to $387.8 million in 2008. Revenues decreased primarily due to a 10% decrease in sales volume and a 2% decrease in average proppant selling price. The Company’s worldwide proppant sales volume totaled 1.043 billion pounds for the year ended December 31, 2009 compared to 1.162 billion pounds for the same period in 2008. Despite a 42% decrease in the drilling rig count in the U.S. and Canada, sales volume in that region decreased by only 8%. Sales volume decreases for most of the Company’s products in the U.S. and Canada were partially offset by greater demand for the Company’s lightweight products, such as CARBOHYDROPROP^® in shale formations. International (excluding Canada) sales volume decreased 20% primarily attributed to decreases in Russia and North Africa partially offset by an increase in Mexico. The average selling price per pound of ceramic proppant was $0.315 per pound in 2009 compared to $0.322 per pound in 2008. The lower average selling price was primarily attributed to a change in the mix of products sold toward lower priced lightweight products.

 

Gross Profit

 

 

The Company’s cost of sales related to proppant manufacturing consists of manufacturing costs, packaging and transportation expenses associated with the delivery of the Company’s products to its customers and handling costs related to maintaining finished goods inventory and operating the Company’s remote stocking facilities. Variable manufacturing costs include raw materials, labor, utilities and repair and maintenance supplies. Fixed manufacturing costs include depreciation, property taxes on production facilities, insurance and factory overhead.

 

Gross profit for the year ended December 31, 2010 was $174.7 million, or 37% of revenues, compared to $120.5 million, or 35% of revenues, for 2009. The increase in gross profit was primarily the result of higher proppant sales volume, an increase in the average proppant selling price and a full year of operations of Falcon Technologies. Gross profit as a percentage of revenues increased primarily as a result of an increase in the average proppant selling price, lower natural gas costs in the Company’s U.S. manufacturing facilities, and a change in the mix of products sold towards lightweight products, partially offset by higher freight costs.

Gross profit for the year ended December 31, 2009 was $120.5 million, or 35% of revenues, compared to $127.4 million, or 33% of revenues, for 2008. The decrease in gross profit was the result of decreased revenues driven primarily by lower sales volumes. Despite the revenue and gross profit decline, gross profit as a percentage of revenues increased primarily as a result of a change in the mix of products sold, lower freight costs and lower natural gas costs in the Company’s U.S. manufacturing facilities.

 

Selling, General & Administrative (SG&A) and Other Operating Expenses

 

 

Operating expenses consisted of $52.6 million of SG&A expenses and $2.4 million of other operating expenses for the year ended December 31, 2010 compared to $40.9 million and $0.1 million, respectively, for 2009. The increase in SG&A expenses primarily resulted from a full year of operations of Falcon Technologies in 2010 and higher marketing, research and development spending. Other operating expenses in 2010 consisted of start-up costs of $1.0 million related to the start-up of the resin-coating plant within the Company’s existing manufacturing infrastructure at the New Iberia, Louisiana facility and the third production line at the Company’s Toomsboro, Georgia facility, an impairment of goodwill of $0.4 million related to the Company’s geotechnical monitoring business and a $1.0 million loss on equipment disposals mainly related to the Company’s U.S. manufacturing facilities. As a percentage of revenues, SG&A and other operating expenses for 2010 were essentially flat compared to last year.

 

Operating expenses consisted of $40.9 million of SG&A expenses and $0.1 million of other operating expenses for the year ended December 31, 2009 compared to $37.6 million and $2.7 million, respectively, for 2008. As a percentage of revenues, SG&A and other operating expenses increased to 12% compared to 10% for the same period in 2008. The increases in SG&A expenses primarily resulted from the inclusion of Falcon Technologies SG&A in 2009, costs associated with the relocation of certain administrative offices and Falcon Technologies acquisition costs. Other operating expenses in 2008 consisted primarily of a $1.4 million write-off of a prepayment for the purchase of ceramic proppant from a third-party proppant manufacturer and $1.1 million relating to start-up costs for the second production line at the Company’s Toomsboro, Georgia facility and the reopening of the New Iberia, Louisiana manufacturing facility idled earlier in 2008.

 

Other Income (Expense)

 

 

Other income for the year ended December 31, 2010 declined $0.6 million compared to the same period in 2009. This decline is mainly attributed to a $0.3 million increase in foreign currency exchange losses and a $0.3 million decrease in interest income.

 

Other income for the year ended December 31, 2009 declined $0.9 million compared to the same period in 2008. This decline is mainly attributed to a $0.8 million decrease in foreign currency exchange gains resulting from exchange rate fluctuations between the local reporting currency and the currency in which certain liabilities of the Company’s subsidiary in Russia are denominated. The Company recognizes gains and losses resulting from fluctuations in these currencies as a result of the capital structure of its investment in that country. By the end of 2008, the Company had restructured its investment in Russia thereby reducing income statement exposure to future changes in currency exchange rates.

Income Tax Expense

 

 

Consolidated income tax expense was $40.6 million, or 34.0% of pretax income, for the year ended December 31, 2010 compared to $27.0 million, or 33.8% of pretax income for 2009. The $13.6 million increase is primarily due to higher pretax income.

 

Consolidated income tax expense was $27.0 million, or 33.8% of pretax income, for the year ended December 31, 2009 compared to $27.9 million, or 31.6% of pretax income for 2008. The $0.9 million decrease is due to lower pretax income partially offset by an increase in the effective tax rate primarily due to benefits relating to mining depletion deductions that the Company recorded during the third quarter of 2008.

 

Discontinued Operations

 

On August 28, 2008, the Company entered into a definitive agreement to sell its fracture and reservoir diagnostics business, including the Pinnacle name and related trademarks. The resulting gain on sale and operations of this business are presented as discontinued operations. The sale was completed on October 10, 2008 for $142.3 million in cash, net of working capital adjustments. The Company recorded a gain of $44.1 million, which is net of income taxes of $24.4 million. The Company did not record any income from discontinued operations in 2010 or 2009.

 

Liquidity and Capital Resources

 

At December 31, 2010, the Company had cash and cash equivalents of $46.7 million compared to cash and cash equivalents of $69.6 million at December 31, 2009. During 2010, the Company generated $91.8 million of cash from operating activities of continuing operations, retained $0.8 million from excess tax benefits relating to stock based compensation, received $0.3 million proceeds from exercised stock options and retained $0.2 million from the effect of exchange rate changes on cash. Uses of cash included $96.5 million for capital expenditures, $17.6 million for the payment of cash dividends and $1.9 million for repurchases of the Company’s common stock. Major capital spending in 2010 included engineering and procurement on a third production line at the Toomsboro facility, construction costs related to the fourth production line at the Toomsboro facility, equipment relating to the resin-coating process at the New Iberia facility, and replacement of various equipment associated with the McIntyre facility.

 

The Company believes its operating results for 2011 will continue to be influenced by the level of natural gas drilling in North America but expects its ability to demonstrate the value of ceramic proppant relative to alternatives will allow it to continue to generate new sales opportunities. Moreover, the North American natural gas rig count appears to have stabilized during 2010. While natural gas prices remain low, a shift in oilfield activity by the Company’s clients to oily, liquids-rich plays is encouraging and demand for the Company’s ceramic proppant is expected to remain high during the year.

 

Subject to its financial condition, the amount of funds generated from operations and the level of capital expenditures, the Company’s current intention is to continue to pay quarterly dividends to holders of its common stock. On January 18, 2011, the Company’s Board of Directors approved the payment of a quarterly cash dividend of $0.20 per share to shareholders of the Company’s common stock on February 1, 2011. The dividend is payable on February 15, 2011. The Company estimates its total capital expenditures in 2011 will be between $100.0 million and $110.0 million, which includes costs associated with completion of the previously announced construction of the Company’s fourth production line at its Toomsboro, Georgia facility and a second resin coating line at the Company’s New Iberia facility. The Company anticipates that the projects will be completed by the end of 2011.

 

The Company has historically maintained an unsecured line of credit of $10.0 million. In January 2010, the Company obtained a new $10.0 million unsecured line of credit with Wells Fargo Bank, N.A., replacing an expired

line of credit with another bank. As of December 31, 2010, there was no outstanding debt under the new credit agreement. The Company anticipates that cash on hand, cash provided by operating activities and funds available under its line of credit will be sufficient to meet planned operating expenses, tax obligations, capital expenditures and other cash needs for the next 12 months. The Company also believes that it could acquire additional debt financing, if needed. Based on these assumptions, the Company believes that its fixed costs could be met even with a moderate decrease in demand for the Company’s products.

 

Off-Balance Sheet Arrangements

 

The Company had no off-balance sheet arrangements as of December 31, 2010.

 

Contractual Obligations

 

The following table summarizes the Company’s contractual obligations as of December 31, 2010:

 

 

See Note 6 and Note 15 to the Notes to the Consolidated Financial Statements.

 

Operating lease obligations relate primarily to railroad equipment leases and include leases of other property, plant and equipment.

 

The Company uses natural gas to power its domestic manufacturing plants. From time to time, the Company enters into contracts to purchase a portion of the anticipated natural gas requirements at specified prices. As of December 31, 2010, the last such contract was due to expire in December 2015.

 

The Company has entered into contracts to supply raw materials, primarily kaolin and bauxite, to each of its manufacturing plants. Each of the contracts is described in Note 15 to the Notes to the Consolidated Financial Statements. Two of the contracts do not require the Company to purchase minimum annual quantities, but do require the purchase of minimum annual percentages, ranging from 70% to 80% of the respective plants’ requirements for the specified raw materials. One outstanding contract requires the Company to purchase a minimum annual quantity of material.

 

 

The Company’s major market risk exposure is to foreign currency fluctuations that could impact its investments in China and Russia. As of December 31, 2010, the Company’s net investment that is subject to foreign currency fluctuations totaled $81.0 million, and the Company has recorded a cumulative foreign currency translation loss of $4.1 million, net of deferred income tax benefit. This cumulative translation loss is included in Accumulated Other Comprehensive Loss. From time to time, the Company may enter into forward foreign exchange contracts to hedge the impact of foreign currency fluctuations. There were no such foreign exchange contracts outstanding at December 31, 2010.

The Company has a $10.0 million revolving credit agreement with a bank. Under the terms of the agreement, the Company has the option of choosing either the bank’s fluctuating Base Rate or LIBOR Fixed Rate, plus an Applicable Margin, all as defined in the credit agreement. There were no borrowings outstanding under the agreement at December 31, 2010. The Company does not believe that it has any material exposure to market risk associated with interest rates.

 

The Company is subject to the risk of market price fluctuations of certain commodities, such as natural gas, and utilizes forward purchase contracts to manage or reduce market risks relating to these costs. The Company does not enter into these transactions for speculative or trading purposes. The Company expects to take delivery of the underlying natural gas and, as such, does not currently believe the market risk exposure on these instruments to be material. As of December 31, 2010, $58.2 million of natural gas forward contracts were outstanding for delivery of gas through 2015.

 

 

The information required by this Item is contained in pages F-3 through F-22 of this Report.

 

 

Not applicable.

 

 

(a) Evaluation of Disclosure Controls and Procedures

 

Disclosure controls and procedures are designed to ensure that information required to be disclosed in the reports filed or submitted under the Securities Exchange Act of 1934 (the “Exchange Act”) is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in the reports filed under the Exchange Act is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

As of December 31, 2010, management carried out an evaluation, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures. Accordingly, even effective disclosure controls and procedures can only provide reasonable assurances of achieving their control objectives. Based upon and as of the date of that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms, and to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

(b) Management’s Report on Internal Control Over Financial Reporting

 

For Management’s Report on Internal Control Over Financial Reporting, see page F-1 of this Report.

 

(c) Report of Independent Registered Public Accounting Firm

 

For the Report of Independent Registered Public Accounting Firm on the Company’s internal control over financial reporting, see page F-2 of this Report.

 

(d) Changes in Internal Control over Financial Reporting

 

There were no changes in the Company’s internal control over financial reporting during the quarter ended December 31, 2010, that materially affected, or are reasonably likely to materially affect, those controls.

 

Not applicable.

 

Certain information required by Part III is omitted from this Report. The Company will file a definitive proxy statement pursuant to Regulation 14A (the “Proxy Statement”) not later than 120 days after the end of the fiscal year covered by this Report and certain information included therein is incorporated herein by reference. Only those sections of the Proxy Statement that specifically address the items set forth herein are incorporated by reference. Such incorporation does not include the Compensation Committee Report included in the Proxy Statement.

 

 

Information concerning executive officers under Item 401 of Regulation S-K is set forth in Part I of this Form 10-K. The other information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Security Ownership of Certain Beneficial Owners and Management,” “Election of Directors,” “Board of Directors, Committees of the Board of Directors and Meeting Attendance,” “Code of Business Conduct and Ethics,” “Section 16(a) Beneficial Ownership Reporting Compliance” and “Report of the Audit Committee.”

 

 

The information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Compensation of Executive Officers,” “Director Compensation” and “Potential Termination and Change in Control Payments.”

 

 

The information required by this Item is incorporated by reference from the Company’s Proxy Statement under the captions “Securities Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information.”

 

 

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Election of Directors.”

 

 

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Ratification of Appointment of the Company’s Independent Registered Public Accounting Firm.”

 

 

(a) Exhibits, Financial Statements and Financial Statement Schedules:

 

1. Consolidated Financial Statements

 

The Consolidated Financial Statements of CARBO Ceramics Inc. listed below are contained in pages F-3 through F-22 of this Report:

 

Report of Independent Registered Public Accounting Firm

Consolidated Balance Sheets at December 31, 2010 and 2009

 

Consolidated Statements of Income for each of the three years ended December 31, 2010, 2009 and 2008

 

Consolidated Statements of Shareholders’ Equity for each of the three years ended December 31, 2010, 2009 and 2008

 

Consolidated Statements of Cash Flows for each of the three years ended December 31, 2010, 2009 and 2008

 

2. Consolidated Financial Statement Schedules

 

All schedules have been omitted since they are either not required or not applicable.

 

3. Exhibits

 

The exhibits listed on the accompanying Exhibit Index are filed as part of, or incorporated by reference into, this Report.

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

CARBO Ceramics Inc.

 

Gary A. Kolstad

President and Chief Executive Officer

 

Ernesto Bautista III

Vice President and

Chief Financial Officer

 

Dated: February 25, 2011

 

POWER OF ATTORNEY

 

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Gary A. Kolstad and Ernesto Bautista III, jointly and severally, his attorneys-in-fact, each with the power of substitution, for him in any and all capacities, to sign any amendments to this Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with generally accepted accounting principles.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Management, including our Chief Executive Officer and our Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2010. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework. Based on its assessment and those criteria, management has concluded that the Company maintained effective internal control over financial reporting as of December 31, 2010.

 

The Company’s independent registered public accounting firm, Ernst & Young LLP, has issued an attestation report on the Company’s internal control over financial reporting. That report is included herein.

 

The Board of Directors and Shareholders

CARBO Ceramics Inc.

 

We have audited CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). CARBO Ceramics Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, CARBO Ceramics Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2010, based on the COSO criteria.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2010, and 2009, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2010 and our report dated February 25, 2011 expressed an unqualified opinion thereon.

 

 

New Orleans, Louisiana

February 25, 2011

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Shareholders

CARBO Ceramics Inc.

 

We have audited the accompanying consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2010 and 2009, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2010. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

 

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of CARBO Ceramics Inc. at December 31, 2010 and 2009, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2010, in conformity with U.S. generally accepted accounting principles.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2010, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 25, 2011 expressed an unqualified opinion thereon.

 

 

New Orleans, Louisiana

February 25, 2011

CARBO CERAMICS INC.

CONSOLIDATED BALANCE SHEETS

ASSETS

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF INCOME

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF CASH FLOWS