UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

 

Form 10-K

 

 

Commission File No. 001-15903

CARBO Ceramics Inc.

(Exact name of registrant as specified in its charter)

 

 

575 North Dairy Ashford

Suite 300

Houston, Texas 77079

(Address of principal executive offices)

 

(281) 921-6400

(Registrant’s telephone number)

 

Securities registered pursuant to Section 12(b) of the Act:

 

 

Securities registered pursuant to Section 12(g) of the Act:

None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes þ     No o

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o     No þ

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes o     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act:

 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o     No þ

 

The aggregate market value of the Common Stock held by non-affiliates of the Registrant, based upon the closing sale price of the Common Stock on June 30, 2009, as reported on the New York Stock Exchange, was approximately $547,242,237. Shares of Common Stock held by each executive officer and director and by each person who owns 10% or more of the outstanding Common Stock have been excluded in that such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.

 

As of February 23, 2010, the Registrant had 23,123,943 shares of Common Stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the Proxy Statement for Registrant’s Annual Meeting of Shareholders to be held May 18, 2010, are incorporated by reference in Part III.

 

 

TABLE OF CONTENTS

 

 

 

General

 

CARBO Ceramics Inc. (the “Company”) is the world’s largest supplier of ceramic proppant, the provider of the world’s most popular fracture simulation software, and provides fracture design and consulting services. The Company also provides a broad range of technologies for spill prevention, containment and geotechnical monitoring. On October 10, 2008, the Company completed the sale of its fracture and reservoir diagnostics business. Because of the transaction, the results of this business have been accounted for as discontinued operations. Continuing operations include the Company’s ceramic proppant, software, consulting services, spill prevention and containment and geotechnical monitoring businesses. The Company sells the majority of its products and services to operators of oil and natural gas wells and to oilfield service companies to help increase the production rates and the amount of oil and natural gas ultimately recoverable from these wells. The Company’s products and services are primarily used in the hydraulic fracturing of natural gas and oil wells. The Company was incorporated in 1987 in Delaware.

 

Hydraulic fracturing is the most widely used method of increasing production from oil and natural gas wells. The hydraulic fracturing process consists of pumping fluids down a natural gas or oil well at pressures sufficient to create fractures in the hydrocarbon-bearing rock formation. A granular material, called proppant, is suspended and transported in the fluid and fills the fracture, “propping” it open once high-pressure pumping stops. The proppant-filled fracture creates a permeable channel through which the hydrocarbons can flow more freely from the formation to the well and then to the surface.

 

There are three primary types of proppant that can be utilized in the hydraulic fracturing process: sand, resin-coated sand and ceramic. Sand is the least expensive proppant, resin-coated sand is more expensive and ceramic proppant is typically the most expensive. The higher initial cost of ceramic proppant is justified by the fact that the use of these proppants in certain well conditions results in an increase in the production rate of oil and natural gas, an increase in the total oil or natural gas that can be recovered from the well and, consequently, an increase in cash flow for the operators of the well. The increased production rates are primarily attributable to the higher strength and more uniform size and shape of ceramic proppant versus alternative materials.

 

The Company primarily manufactures five distinct ceramic proppants. The Company has historically pursued a strategy of introducing new products that expand the market for ceramic proppants relative to sand-based proppants. CARBOHSP^® and CARBOPROP^® are high strength proppants designed primarily for use in deep gas wells. CARBOHSP^® has the highest strength of any of the ceramic proppants manufactured by the Company and is used primarily in the fracturing of deep gas wells. CARBOPROP^® is slightly lower in weight and strength than CARBOHSP^® and was developed for use in deep gas wells that do not require the strength of CARBOHSP^®.

 

CARBOLITE^®, CARBOECONOPROP^® and CARBHYDROPROP^® are lightweight ceramic proppants. CARBOLITE^® is used in medium depth oil and gas wells, where the additional strength of ceramic proppant may not be essential, but where higher production rates can be achieved due to the product’s uniform size and spherical shape. CARBOECONOPROP^® was introduced in 1992 to compete directly with sand-based proppant, and CARBOHYDROPROP^® was introduced in late 2007 to improve performance in “slickwater” fracture treatments.

 

During the year ended December 31, 2009, the Company generated approximately 76% of its revenues in the United States and 24% in international markets.

 

The Company also sells fracture simulation software and provides fracture design, engineering and consulting services to oil and natural gas companies worldwide through its wholly-owned subsidiary, StrataGen, Inc. The Company provides a suite of stimulation software solutions to the industry that have marked capabilities for on-site real-time analysis. This has enabled recognition and remediation of potential stimulation problems. This stimulation software is tightly integrated with reservoir simulators, thus allowing for stimulation treatment and production optimization. The Company’s specialized engineering team consults and works with operators around the world to help optimize well placement, fracture treatment design and production stimulation. The broad range of

expertise of the Company’s consultants includes: fracture treatment design; completion engineering support; on-site treatment supervision, engineering and quality control; post-treatment evaluation and optimization; reservoir and fracture engineering studies; rock mechanics and software application and training.

 

Demand for most of the Company’s products and services depends primarily upon the demand for natural gas and oil and on the number of natural gas and oil wells drilled, completed or re-completed worldwide. More specifically, the demand for the Company’s products and services is dependent on the number of oil and natural gas wells that are hydraulically fractured to stimulate production.

 

The Company also provides a broad range of technologies for spill prevention and containment and geotechnical monitoring through its wholly owned subsidiaries Falcon Technologies and Services, Inc. (“Falcon Technologies”) and Applied Geomechanics, Inc. (“AGI”). AGI provides monitoring systems and services for bridges, buildings, tunnels, dams, slopes, embankments, volcanoes, landslides, mines and construction projects around the world. It serves a wide spectrum of customers in markets ranging from auto racing teams to surveyors, experimental physicists, radio astronomers and naval architects.

 

On October 2, 2009, Falcon Technologies purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention and containment systems for the oil and gas industry. The acquisition broadened the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide solutions that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

 

Competition

 

One of the Company’s largest worldwide proppant competitors is Saint-Gobain Proppants (“Saint-Gobain”). Saint-Gobain Proppants is a division of Compagnie de Saint-Gobain, a large French glass and materials company. Saint-Gobain manufactures a variety of ceramic proppants that it markets in competition with each of the Company’s products. Saint-Gobain’s primary manufacturing facility is located in Fort Smith, Arkansas. Saint-Gobain also manufactures ceramic proppant in China and Venezuela. Mineracao Curimbaba (“Curimbaba”), based in Brazil, is also a large competitor and manufactures ceramic proppants that it markets in competition with some of the Company’s products.

 

There are two major manufacturers of ceramic proppant in Russia. Borovichi Refractory Plant (“Borovichi”) located in Borovichi, Russia, and FORES Refractory Plant (“FORES”) located in Ekaterinburg, Russia. Although the Company has limited information about Borovichi and FORES, the Company believes that Borovichi primarily manufactures intermediate strength ceramic proppants and markets its products principally within Russia, and that FORES manufactures intermediate strength and lightweight ceramic proppant lines. The Company further believes that these companies have added manufacturing capacity in recent years and now provide a majority of the ceramic proppant used in Russia. FORES also exports a small percentage of its proppant for sales in North America. The Company is also aware of an increasing number of manufacturers in China. Most of these companies produce intermediate strength ceramic proppants that are marketed primarily in China.

 

Competition for CARBOHSP^® and CARBOPROP^® principally includes ceramic proppant manufactured by Saint-Gobain and Curimbaba. The Company’s CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^® products compete primarily with ceramic proppant produced by Saint-Gobain and Curimbaba and with sand-based proppant for use in the hydraulic fracturing of medium depth natural gas and oil wells. The leading suppliers of mined sand are Unimin Corp., Badger Mining Corp., Fairmount Minerals Limited, Inc., and Ogelbay-Norton Company. The leading suppliers of resin-coated sand are Hexion Specialty Chemicals, Inc. and Santrol, a subsidiary of Fairmount Minerals.

 

The Company believes that the most significant factors that influence a customer’s decision to purchase the Company’s ceramic proppant are (i) price/performance ratio, (ii) on-time delivery performance, (iii) technical support and (iv) proppant availability. The Company believes that its products are competitively priced and that its delivery performance is excellent. The Company also believes that its superior technical support has enabled it to persuade customers to use ceramic proppant in an increasingly broad range of applications and thus increased the overall market for the Company’s products. Since 1993, the Company has consistently expanded its manufacturing

capacity and plans to continue its strategy of adding capacity, as needed, to meet anticipated future increases in sales demand.

 

The Company continually conducts testing and development activities with respect to alternative raw materials to be used in the Company’s existing and alternative production methods. The Company is actively involved in the development of alternative products for use as proppant in the hydraulic fracturing process and is aware of others engaged in similar development activities. The Company believes that while there are potential specialty applications for these products, they will not significantly impact the use of ceramic proppants. The Company believes that the “know-how” and trade secrets necessary to efficiently manufacture a product of consistently high quality are difficult barriers to entry to overcome.

 

Customers and Marketing

 

The Company’s largest customers are, in alphabetical order, BJ Services Company, Halliburton Energy Services, Inc. and Schlumberger Limited, three of the largest participants in the worldwide petroleum pressure pumping industry. These companies collectively accounted for approximately 73% and 72% of the Company’s 2009 and 2008 revenues, respectively. However, the end users of the Company’s products are the operators of natural gas and oil wells that hire the pressure pumping service companies to hydraulically fracture wells. The Company works both with the pressure pumping service companies and directly with the operators of natural gas and oil wells to present the technical and economic advantages of using ceramic proppant. The Company generally supplies its customers with products on a just-in-time basis, as specified in individual purchase orders. Continuing sales of product depend on the Company’s direct customers and the well operators being satisfied with product quality, availability and delivery performance. The Company provides its software simulation products and consulting services directly to owners and/or operators of oil and gas wells.

 

The Company recognizes the importance of a technical marketing program in demonstrating long-term economic advantages when selling products and services that offer financial benefits over time. The Company has a broad technical sales force to advise end users on the benefits of using ceramic proppant and performing fracture simulation and consultation services.

 

Although the Company’s products have historically been used in deep wells that require high-strength proppant, the Company believes that there is economic benefit to well operators of using ceramic proppant in shallower wells that do not necessarily require a high-strength proppant. The Company believes that its new product introductions and education-based technical marketing efforts have allowed it to capture a greater portion of the market for sand-based proppant in recent years and will continue to do so in the future.

 

The Company provides a variety of technical support services and has developed computer software that models the return on investment achievable by using the Company’s ceramic proppant versus alternatives in the hydraulic fracturing of a natural gas or oil well. In addition to the increased technical marketing effort, the Company from time to time engages in large-scale field trials to demonstrate the economic benefits of its products and validate the findings of its computer simulations. Periodically, the Company provides proppant to production companies for field trials, on a discounted basis, in exchange for a production company’s agreement to provide production data for direct comparison of the results of fracturing with ceramic proppant as compared to alternative proppants.

 

The Company’s international marketing efforts are conducted primarily through its sales offices in Dubai, United Arab Emirates; Aberdeen, Scotland; Beijing, China; and Moscow, Russia, and through commissioned sales agents located in South America and China. The Company’s products and services are used worldwide by U.S. customers operating domestically and abroad, and by foreign customers. Sales outside the United States accounted for 24%, 29% and 36% of the Company’s sales for 2009, 2008 and 2007, respectively. The decrease in the proportion of international sales is primarily attributable to increased imports of products to the U.S. as well as

expanded production capacities in the U.S. The distribution of the Company’s international and domestic revenues is shown below, based upon the region in which the customer used the products and services:

 

 

Production Capacity

 

The Company believes that constructing adequate capacity ahead of demand while incorporating new technology to reduce manufacturing costs are important competitive strategies to increase its overall share of the market for proppant.

 

In early 2006, the Company completed construction of a manufacturing facility in Toomsboro, Georgia. A second production line at this facility was completed in the fourth quarter of 2007 and commenced operations in January 2008. The plant is designed to accommodate future expansion to a capacity of up to one billion pounds per year through the construction of two additional production lines. The addition of subsequent lines will be dependent on the expected future demand for the Company’s products. The Company is currently working on the construction of a third production line, with a production capacity of 250 million pounds per year, in Toomsboro and anticipates that it will be completed near the end of 2010.

 

In the fourth quarter of 2007, the Company announced its plan to idle ceramic proppant production at its New Iberia facility originally constructed in 1978. The Company’s decision to idle production at this facility was based on the rising cost of imported raw material and the small scale of the New Iberia facility. During the fourth quarter of 2008, the Company re-started ceramic proppant production at New Iberia due to increased demand for certain specialty products that could be produced at this location with minimal engineering modifications to the facility. In July 2009, the Company once again idled ceramic proppant manufacturing operations at its New Iberia facility. The facility continues to function as a distribution center and the Company has built a resin coating plant within the existing manufacturing infrastructure of the facility. The resin coating plant, which began production in 2010, is utilized to coat proppant manufactured at other locations.

 

The following table sets forth the current capacity of each of the Company’s existing manufacturing facilities:

 

 

 

 

The Company generally supplies its domestic pumping service customers with products on a just-in-time basis and operates without any material backlog.

Long-Lived Assets By Geographic Area

 

Long-lived assets, consisting of net property, plant and equipment, goodwill, intangibles, and other long-term assets as of December 31 in the United States and other countries are as follows:

 

 

Distribution

 

The Company maintains finished goods inventories at each of its manufacturing facilities and at remote stocking facilities. The North American remote stocking facilities consist of bulk storage silos with truck trailer loading facilities, as well as rail yards for direct transloading from rail car to tank trucks. International remote stocking sites are duty-free warehouses operated by independent owners. North American sites are typically supplied by rail, and international sites are typically supplied by container ship. In total, the Company leases 874 rail cars for use in the distribution of its products. The price of the Company’s products sold for delivery in the lower 48 United States and Canada includes just-in-time delivery of proppant to the operator’s well site, which eliminates the need for customers to maintain an inventory of ceramic proppant.

 

Raw Materials

 

Ceramic proppant is made from alumina-bearing ores (commonly referred to as clay, bauxite, bauxitic clay or kaolin, depending on the alumina content) that are readily available on the world market. Bauxite is largely used in the production of aluminum metal, refractory material and abrasives. The main known deposits of alumina-bearing ores in the United States are in Arkansas, Alabama and Georgia; other economically mineable known deposits are located in Australia, Brazil, China, Gabon, Guyana, India, Jamaica, Russia and Surinam.

 

For the production of CARBOHSP^® and CARBOPROP^® in the United States the Company uses bauxite, and has historically purchased its annual requirements at the seller’s current prices. In 2008, the Company signed multi-year agreements with both a domestic and international supplier for a portion of its annual bauxite requirement and the Company believes that these agreements will sufficiently provide for its bauxite needs in 2010. The Company is actively evaluating alternative suppliers for future bauxite requirements.

 

The Company’s Eufaula facility uses primarily locally mined kaolin for the production of CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^®. The Company has entered into a bi-lateral contract that requires a supplier to sell to the Company, and the Company to purchase from the supplier, a majority of the Eufaula facility’s annual kaolin requirements through 2010.

 

The Company’s Toomsboro and McIntyre production facilities in Wilkinson County, Georgia, use locally mined uncalcined kaolin for the production of CARBOLITE^®, CARBOECONOPROP^® and CARBOHYDROPROP^®. The Company has obtained ownership rights in acreage in Wilkinson County, Georgia, which contains in excess of a fifteen year supply of kaolin for these facilities at current production rates. The Company has entered into a long-term agreement with a third party to mine and transport this material at a fixed price subject to annual adjustment. The agreement requires the Company to utilize the third party to mine and transport a majority of the McIntyre facility’s annual kaolin requirement.

 

The Company’s production facility in Luoyang, China, uses both kaolin and bauxite for the production of CARBOPROP^® and CARBOLITE^®. Each of these materials is purchased under long-term contracts that stipulate fixed prices subject to periodic adjustment and provides for minimum purchase requirements.

 

The Company’s production facility in Kopeysk, Russia currently uses uncalcined bauxite for the production of CARBOPROP^®. Bauxite is purchased under annual agreements that stipulate fixed prices for up to a specified quantity of material.

Production Process

 

Ceramic proppants are made by grinding or dispersing ore to a fine powder, combining the powder into small pellets and firing the pellets in a rotary kiln. The Company uses two different methods to produce ceramic proppant. The Company’s plants in New Iberia, Louisiana; McIntyre, Georgia; Kopeysk, Russia and Luoyang, China use a dry process, which utilizes clay, bauxite, bauxitic clay or kaolin. The raw material is ground, pelletized and screened. The manufacturing process is completed by firing the product in a rotary kiln.

 

The Company’s plants in Eufaula, Alabama and Toomsboro, Georgia, use a wet process, which starts with kaolin from local mines that is formed into slurry. The slurry is then pelletized in a dryer and the pellets are then fired in a rotary kiln.

 

The Company’s rotary kilns are primarily heated by the use of natural gas.

 

Patent Protection and Intellectual Property

 

The Company makes ceramic proppant and ceramic media used in foundry and scouring processes (the later two items comprising a minimal volume of overall sales) by processes and techniques that involve a high degree of proprietary technology, some of which are protected by patents.

 

The Company owns six U.S. patents, three Russian patents, three Eurasian patents, one Saudi Arabian patent and one Singapore patent. One of the Company’s U.S. patents relates to a low-apparent specific gravity ceramic proppant, and will expire in 2022. Two of the Company’s U.S. patents and the Company’s Singapore and Saudi Arabian patents relate to TiO₂ scouring media, a titanium-based media used in scouring processes, and will expire in 2023 through 2025. One of the Company’s U.S. patents and one of the Eurasian patents relate to the spray drying of proppant and will expire in 2025. One of the Company’s U.S. patents, two of the Eurasian patents and the three Russian patents relate to lightweight and intermediate strength proppants and will expire in 2025 through 2027. The three Russian patents relate to proppant that is produced in the Company’s Russian manufacturing facility.

 

The Company owns ten U.S. patent applications (together with a number of counterpart applications pending in foreign jurisdictions). Eight of the U.S. patent applications (together with a number of counterpart applications pending in foreign jurisdictions) cover ceramic proppant and processes for making ceramic proppant. Two of the U.S. patent applications (along with a number of counterpart applications pending in foreign jurisdictions) relate to detection of subterranean fractures. The applications are in various stages of the patent prosecution process, and patents may not issue on such applications in any jurisdiction for some time, if they issue at all.

 

The Company believes that its patents have been important in enabling the Company to compete in the market to supply proppant to the natural gas and oil industry, although important patents expired in 2006 and 2009. The Company intends to enforce, and has in the past vigorously enforced, its patents. The Company may from time to time in the future be involved in litigation to determine the enforceability, scope and validity of its patent rights. In addition to patent rights, and perhaps more notably, the Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. None of this “know-how” and technology is licensed from third parties.

 

Falcon Technologies, through its acquisition of substantially all of the assets of BBL Falcon Industries, Ltd. in 2009, owns one U.S. patent, which expires in 2027 and relates to construction of secondary containment areas, and two U.S. patent applications (together with a number of counterpart applications pending in foreign jurisdictions) that relate to construction of tank bases and load bearing products.

 

Environmental and Other Governmental Regulations

 

The Company believes that its operations are in substantial compliance with applicable domestic and foreign federal, state and local environmental and safety laws and regulations. However, on January 26, 2007, following self-disclosure of certain air pollution emissions, the Company received a Notice of Violation (“NOV”) from the State of Georgia Environmental Protection Division (“EPD”) regarding appropriate permitting for emissions of two specific substances from its Toomsboro facility. The Company received an additional NOV with respect to emissions from its McIntyre facility in May 2007. New emissions operating permits for the McIntyre and

Toomsboro facilities were received in May and November 2008, respectively, and the Company is now conducting operations pursuant to these new permits. In May 2009, the Company entered into a consent order with the EPD to resolve the Toomsboro and McIntyre NOVs. Pursuant to the Consent Order, the Company has paid the EPD a fine of $258,000. In addition, the Company must pay the EPD a further fine of $112,000 within approximately one year from the date of the Consent Order, less certain amounts that the Company can demonstrate have been spent in order to implement emission reductions at these facilities. Finally, the Consent Order requires the Company to pay any unpaid permit fees from certain prior years that would have been payable on account of the Company’s actual emissions at the time. The Company presently estimates the amount of such fees to be less than approximately $100,000.

 

In response to the NOVs, and its desire to expand its production capacities at both facilities, the Company also submitted Prevention of Significant Deterioration (“PSD”) permit applications for both facilities in June 2008. Permits for both facilities were obtained in December 2009.

 

Employees

 

At December 31, 2009, the Company had 741 employees worldwide. In addition to the services of its employees, the Company employs the services of consultants as required. The Company’s employees are not represented by labor unions. There have been no work stoppages or strikes during the last three years that have resulted in the loss of production or production delays. The Company believes its relations with its employees are satisfactory.

 

Forward-Looking Information

 

The Private Securities Litigation Reform Act of 1995 provides a “safe harbor” for forward-looking statements. This Form 10-K, the Company’s Annual Report to Shareholders, any Form 10-Q or any Form 8-K of the Company or any other written or oral statements made by or on behalf of the Company may include forward-looking statements which reflect the Company’s current views with respect to future events and financial performance. The words “believe”, “expect”, “anticipate”, “project”, “estimate”, “forecast”, “plan” or “intend” and similar expressions identify forward-looking statements. Readers are cautioned not to place undue reliance on these forward-looking statements, each of which speaks only as of the date the statement was made. The Company undertakes no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise. The Company’s forward-looking statements are based on assumptions that we believe to be reasonable but that may not prove to be accurate. All of the Company’s forward-looking information is subject to risks and uncertainties that could cause actual results to differ materially from the results expected. Although it is not possible to identify all factors, these risks and uncertainties include the risk factors discussed below.

 

The Company’s results of operations could be adversely affected if its business assumptions do not prove to be accurate or if adverse changes occur in the Company’s business environment, including but not limited to:

 

 

 

The Company’s results of operations could also be adversely affected as a result of worldwide economic, political and military events, including war, terrorist activity or initiatives by the Organization of the Petroleum Exporting Countries (“OPEC”). For further information, see “Item 1A. Risk Factors.”

 

Available Information

 

The Company’s annual reports on Form 10-K, proxy statements, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934 (“Exchange Act”) are made available free of charge on the Company’s internet website at http://www.carboceramics.com as soon as reasonably practicable after such material is filed with, or furnished to, the Securities and Exchange Commission (“SEC”).

 

The public may read and copy any materials that the Company files with the SEC at the SEC’s Public Reference Room at 100 F Street, Room 1580, N.E., Washington, D.C. 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC, at http://www.sec.gov.

 

 

You should consider carefully the trends, risks and uncertainties described below and other information in this Form 10-K and subsequent reports filed with the SEC before making any investment decision with respect to our securities. If any of the following trends, risks or uncertainties actually occurs or continues, our business, financial condition or operating results could be materially adversely affected, the trading prices of our securities could decline, and you could lose all or part of your investment.

 

Our business and financial performance depend on the level of activity in the natural gas and oil industries.

 

Our operations are materially dependent upon the levels of activity in natural gas and oil exploration, development and production. More specifically, the demand for our products is closely related to the number of natural gas and oil wells completed in geologic formations where ceramic proppants are used in fracture treatments. These activity levels are affected by both short-term and long-term trends in natural gas and oil prices. In recent years, natural gas and oil prices and, therefore, the level of exploration, development and production activity, have experienced significant fluctuations. Worldwide economic, political and military events, including war, terrorist activity, events in the Middle East and initiatives by OPEC, have contributed, and are likely to continue to contribute, to price volatility. Additionally, warmer than normal winters in North America and other weather patterns may adversely impact the short-term demand for natural gas and, therefore, demand for our products and services. Natural gas and oil prices experienced a decline in the second half of 2008 and during portions of 2009. A prolonged reduction in natural gas and oil prices would generally depress the level of natural gas and oil exploration, development, production and well completions activity and result in a corresponding decline in the demand for our products. Such a decline could have a material adverse effect on our results of operations and financial condition.

 

Our business and financial performance could suffer if new processes are developed to replace hydraulic fracturing or as a result of increased regulation of hydraulic fracturing.

 

Substantially all of our products are proppants used in the completion and re-completion of natural gas and oil wells through the process of hydraulic fracturing. The development of new processes for the completion of natural gas and oil wells leading to a reduction in, or discontinuation of the use of, hydraulic fracturing could cause a decline in demand for our products. Additionally, increased regulation of hydraulic fracturing could negatively affect our business by increasing the costs of compliance, which could cause operators to abandon the process

altogether due to commercial impracticability. Either of these events could have a material adverse effect on our results of operations and financial condition.

 

We may be adversely affected by decreased demand for ceramic proppant or the development by our competitors of effective alternative proppants.

 

Ceramic proppant is a premium product capable of withstanding higher pressure and providing more highly conductive fractures than mined sand, which is the most commonly used proppant type. Although we believe that the use of ceramic proppant generates higher production rates and more favorable production economics than mined sand, a significant shift in demand from ceramic proppant to mined sand could have a material adverse effect on our results of operations and financial condition. The development and use of effective alternative proppant could also cause a decline in demand for our products, and could have a material adverse effect on our results of operations and financial condition.

 

We rely upon, and receive a significant percentage of our revenues from, a limited number of key customers.

 

During 2009, our largest customers included three of the largest participants in the worldwide petroleum pressure pumping industry. Although the end users of our products are numerous operators of natural gas and oil wells that hire pressure pumping service companies to hydraulically fracture wells, these three customers accounted collectively for approximately 73% of our 2009 revenues. We generally supply our domestic pumping service customers with products on a just-in-time basis, with transactions governed by individual purchase orders. Continuing sales of product depend on our direct customers and the end user well operators being satisfied with product quality, availability and delivery performance. Although we believe our relations with our customers and the major well operators are satisfactory, a material decline in the level of sales to any one of our major customers due to unsatisfactory product performance, delivery delays or any other reason could have a material adverse effect on our results of operations and financial condition.

 

We rely on certain patents.

 

The Company owns six United States patents, three Russian patents, three Eurasian patents, one Saudi Arabian patent and one Singapore patent relating to ceramic proppant. These patents generally cover the manufacture and use of some of our products. The U.S. patents expire at various times in the years 2010 through 2027. We believe that patents have historically been important in enabling us to compete in the market to supply proppant to the natural gas and oil industry. There can be no assurance that our patents will not be challenged or circumvented by competitors in the future or will provide us with any competitive advantage, or that other companies will not be able to market functionally similar products without violating our patent rights. In addition, if our patents are challenged, there can be no assurance that they will be upheld.

 

We provide environmental warranties on certain of our containment and spill prevention products.

 

Falcon Technologies’ tank liners, secondary containments and related products and services are designed to contain or avoid spills of hydrocarbons and other materials. If a release of these materials occurs, it could be harmful to the environment. Although we attempt to negotiate appropriate limitations of liability in the applicable terms of sale, some customers have required expanded warranties, indemnifications or other terms that could hold Falcon Technologies responsible in the event of a spill or release under particular circumstances. If Falcon Technologies is held responsible for a spill or release of materials from one of its customer’s facilities, it could have a material adverse effect on our results of operations and financial condition.

 

Third parties may claim that we are infringing their intellectual property rights.

 

The Company uses a significant amount of trade secrets, or “know-how,” and other proprietary information and technology in the conduct of its business. Although the Company does not believe that it is infringing upon the intellectual property rights of others by using such proprietary information and technology, it is possible that such a claim will be asserted against the Company in the future. In the event any third party makes a claim against us for

infringement of patents or other intellectual property rights of a third party, such claims, with or without merit, could be time-consuming and result in costly litigation. In addition, the Company could experience loss or cancellation of customer orders, experience product shipment delays, or be subject to significant liabilities to third parties. If our products or services were found to infringe on a third party’s proprietary rights, the Company could be required to enter into royalty or licensing agreements to continue selling its products or services. Royalty or licensing agreements, if required, may not be available on acceptable terms, if at all, which could seriously harm our business. Involvement in any patent dispute or other intellectual property dispute or action to protect trade secrets and expertise could have a material adverse effect on the Company’s business.

 

We operate in an increasingly competitive market.

 

We compete with other principal suppliers of ceramic proppant, as well as with suppliers of sand and resin-coated sand for use as proppant, in the hydraulic fracturing of natural gas and oil wells. The proppant market is highly competitive and no one supplier is dominant. The recent expiration of key patents owned by the Company has resulted in additional competition in the market for ceramic proppant. This entry of additional competitors into the market to supply ceramic proppant could have a material adverse effect on our results of operations and financial condition.

 

Significant increases in fuel prices for any extended periods of time will increase our operating expenses.

 

The price and supply of natural gas are unpredictable, and can fluctuate significantly based on international, political and economic circumstances, as well as other events outside our control, such as changes in supply and demand due to weather conditions, actions by OPEC and other oil and gas producers, regional production patterns and environmental concerns. Natural gas is a significant component of our direct manufacturing costs and price escalations will likely increase our operating expenses and can have a negative impact on income from operations and cash flows. We operate in a competitive marketplace and may not be able to pass through all of the increased costs that could result from an increase in the cost of natural gas.

 

Environmental compliance costs and liabilities could reduce our earnings and cash available for operations.

 

We are subject to increasingly stringent laws and regulations relating to environmental protection, including laws and regulations governing air emissions, water discharges and waste management. We incur, and expect to continue to incur, capital and operating costs to comply with environmental laws and regulations. The technical requirements of environmental laws and regulations are becoming increasingly expensive, complex and stringent. These laws may provide for “strict liability” for damages to natural resources or threats to public health and safety. Strict liability can render a party liable for environmental damage without regard to negligence or fault on the part of the party. Some environmental laws provide for joint and several strict liability for remediation of spills and releases of hazardous substances.

 

We use some hazardous substances and generate certain industrial wastes in our operations. In addition, many of our current and former properties are or have been used for industrial purposes. Accordingly, we could become subject to potentially material liabilities relating to the investigation and cleanup of contaminated properties, and to claims alleging personal injury or property damage as the result of exposures to, or releases of, hazardous substances. In addition, stricter enforcement of existing laws and regulations, new laws and regulations, the discovery of previously unknown contamination or the imposition of new or increased requirements could require us to incur costs or become the basis of new or increased liabilities that could reduce our earnings and our cash available for operations.

 

Our international operations subject us to risks inherent in doing business on an international level that could adversely impact our results of operations.

 

International revenues accounted for approximately 24%, 29% and 36% of our total revenues in 2009, 2008 and 2007, respectively. We cannot assure you that we will be successful in overcoming the risks that relate to or arise

from operating in international markets. Risks inherent in doing business on an international level include, among others, the following:

 

 

In particular, we are subject to risks associated with our production facilities in Luoyang, China, and Kopeysk, Russia. The legal systems in both China and Russia are still developing and are subject to change. Accordingly, our operations and orders for products in both countries could be adversely impacted by changes to or interpretation of each country’s law. Further, if manufacturing in either region is disrupted, our overall capacity could be significantly reduced and sales and/or profitability could be negatively impacted.

 

Undetected defects in our fracture simulation software could adversely affect our business.

 

Despite extensive testing, our software could contain defects, bugs or performance problems. If any of these problems are not detected, the Company could be required to incur extensive development costs or costs related to product recalls or replacements. The existence of any defects, errors or failures in our software products may subject us to liability for damages, delay the development or release of new products and adversely affect market acceptance or perception of our software products or related services, any one of which could materially and adversely affect the Company’s business, results of operations and financial condition.

 

The market price of our common stock will fluctuate, and could fluctuate significantly.

 

The market price of the Company’s common stock will fluctuate, and could fluctuate significantly, in response to various factors and events, including the following:

 

 

Our actual results could differ materially from results anticipated in forward-looking statements we make.

 

Some of the statements included or incorporated by reference in this Form 10-K are forward-looking statements. These forward-looking statements include statements relating to trends in the natural gas and oil industries, the demand for ceramic proppant and our performance in the “Management’s Discussion and Analysis of

Financial Condition and Results of Operations” and “Business” sections of this Form 10-K. In addition, we have made and may continue to make forward-looking statements in other filings with the SEC, and in written material, press releases and oral statements issued by us or on our behalf. Forward-looking statements include statements regarding the intent, belief or current expectations of the Company or its officers. Our actual results could differ materially from those anticipated in these forward-looking statements. (See “Business — Forward-Looking Information.”)

 

 

Not applicable.

 

 

The Company maintains its corporate headquarters (approximately 27,000 square feet of leased office space) in Houston. The Company owns its manufacturing facilities, land and substantially all of the related production equipment in New Iberia, Louisiana and Eufaula, Alabama, and leases its McIntyre and Toomsboro, Georgia, facilities. The Company owns the buildings and production equipment at its facility in Luoyang, China, and has been granted use of the land on which the facility is located through 2051 under the terms of a land use agreement with the People’s Republic of China. The Company owns the buildings and production equipment at its facility in Kopeysk, Russia, and substantially all of the land on which the facility is located. The Company leases space for sales offices in Aberdeen, Scotland and Moscow, Russia.

 

The New Iberia, Louisiana facility is located on 26.7 acres of land owned by the Company and consists of two ceramic proppant production units (idle), a resin coating unit, a laboratory, two office buildings and a warehouse, collectively totaling approximately 197,000 square feet. The Eufaula, Alabama facility is located on 14 acres of land owned by the Company and consists of one production unit, a laboratory and an office, collectively totaling approximately 113,700 square feet.

 

The facilities in McIntyre and Toomsboro, Georgia, include real property, plant and equipment that are leased by the Company from the Development Authority of Wilkinson County. The original lease was executed in 1997 and was last amended in 2008. The term of the current lease, which covers both locations, commenced on November 1, 2008, and terminates on November 1, 2013, subject to the Company’s ability to renew the lease through November 2021. Under the terms of the lease, the Company is responsible for all costs incurred in connection with the premises, including costs of construction of the plant and equipment. As an inducement to locate the facility in Wilkinson County, Georgia, the Company received certain ad-valorem property tax incentives. At the termination of the lease, title to all of the real property, plant and equipment is to be conveyed to the Company in exchange for nominal consideration. The Company has the right to purchase the property, plant and equipment at any time during the term of the lease for a nominal price.

 

The facility in McIntyre, Georgia is located on approximately 36 acres of land and consists of various production and support buildings, a laboratory building, a warehouse building and an administrative building, collectively totaling approximately 196,100 square feet. The facility in Toomsboro, Georgia is located on approximately 13 acres of an approximately 1,100-acre tract of property leased by the Company. The facility consists of various production and support buildings, two laboratory buildings, and an administrative building, collectively totaling approximately 113,900 square feet.

 

The facility in Luoyang, China is located on approximately 11 acres and consists of various production and support buildings, a laboratory, and two administrative buildings, collectively totaling approximately 118,000 square feet. The facility in Kopeysk, Russia is located on approximately 60 acres of land and consists of various production and support buildings and an administrative building, collectively totaling approximately 103,000 square feet.

 

The Company owns or otherwise utilizes distribution facilities in multiple locations around the world. See “Item 1. Business — Distribution.”

 

Applied Geomechanics, Inc. leases office space in San Francisco, California (approximately 7,000 square feet).

The Company owns approximately 2,630 acres of land and leasehold interests in Wilkinson County, Georgia, near its plants in McIntyre and Toomsboro, Georgia and approximately 80 acres of leasehold interests in Barbour County, Alabama, near its plant in Eufaula, Alabama. The land contains raw material for use in the production of the Company’s lightweight ceramic proppants. The Company has contracted with a third party to mine and haul the reserves and bear the responsibility for subsequent reclamation of the mined areas.

 

Falcon Technologies owns its service facility located in Decatur, Texas, which is located on approximately 25 acres of land. The facility includes production and administrative buildings totaling approximately 12,000 square feet. Falcon Technologies also leases a service facility in Midland, Texas consisting of 18 acres of land and approximately 2,000 square feet of buildings.

 

 

From time to time, the Company is the subject of legal proceedings arising in the ordinary course of business. The Company does not believe that any of these proceedings will have a material effect on its business or its results of operations.

 

 

No matters were submitted to a vote of security holders during the fourth quarter of 2009.

 

 

Gary A. Kolstad (age 51) was elected on June 1, 2006, by the Company’s Board of Directors to serve as President and Chief Executive Officer and a Director of the Company. Mr. Kolstad previously served in a variety of positions over 21 years with Schlumberger, Ltd. Mr. Kolstad became a Vice President of Schlumberger, Ltd. in 2001, where he last held the positions of Vice President, Oilfield Services — U.S. Onshore and Vice President, Global Accounts.

 

Ernesto Bautista III (age 38) joined the Company as a Vice President on January 1, 2009, and was appointed Chief Financial Officer effective January 20, 2009. From July 2006 until joining the Company, Mr. Bautista served as Vice President and Chief Financial Officer of W-H Energy Services, Inc., a Houston, Texas based diversified oilfield services company (“W-H Energy”). From July 2000 to July 2006, he served as Vice President and Corporate Controller of W-H Energy. From September 1994 to May 2000, Mr. Bautista served in various positions at Arthur Andersen LLP, most recently as a manager in the assurance practice, specializing in emerging, high growth companies. Mr. Bautista is a certified public accountant in the State of Texas.

 

Mark L. Edmunds (age 54) has been the Vice President, Operations since April 2002. From 2000 until joining the Company, Mr. Edmunds served as Business Unit Manager and Plant Manager for FMC Corporation. Prior to 2000, Mr. Edmunds served Union Carbide Corporation and The Dow Chemical Company in a variety of management positions, including Director of Operations, Director of Internal Consulting and Manufacturing Operations Manager.

 

David G. Gallagher (age 51) was appointed as Vice President, Marketing and Sales on April 16, 2007. Mr. Gallagher previously held a variety of positions over a 26 year period with Schlumberger, Ltd., where from 2002 until 2007, he served as Director of Marketing for Venezuela, Trinidad and the Caribbean.

 

R. Sean Elliott (age 35) joined the Company in November 2007 as General Counsel, and was appointed as Corporate Secretary and Chief Compliance Officer in January 2008. Previously, Mr. Elliott served as legal counsel to Aviall, Inc. (an international aviation company) from 2004 to 2007, where he last held the positions of Assistant General Counsel and Assistant Secretary. From 1999 until 2004, Mr. Elliott practiced law with Haynes and Boone, LLP, a Dallas, Texas-based law firm.

 

All officers are elected for one-year terms or until their successors are duly elected. There are no arrangements between any officer and any other person pursuant to which he was selected as an officer. There is no family relationship between any of the named executive officers or between any of them and the Company’s directors.

 

 

Common Stock Market Prices, Dividends and Stock Repurchases

 

The Company’s common stock is traded on the New York Stock Exchange (ticker symbol CRR). The number of record and beneficial holders of the Company’s common stock as of February 9, 2010 was approximately 15,212.

 

The following table sets forth the high and low sales prices of the Company’s common stock on the New York Stock Exchange and dividends for the last two fiscal years:

 

 

 

 

The Company currently expects to continue its policy of paying quarterly cash dividends, although there can be no assurance as to future dividends because they depend on future earnings, capital requirements and financial condition.

 

On August 28, 2008, the Company’s Board of Directors authorized the repurchase of up to two million shares of the Company’s common stock. Shares are effectively retired at the time of purchase. The Company did not repurchase any shares under this plan during the fourth quarter of 2009. As of December 31, 2009, the Company has repurchased and retired 1,743,076 shares at an aggregate price of $64.7 million.

 

The following table provides information about the Company’s repurchases of common stock during the quarter ended December 31, 2009:

 

ISSUER PURCHASES OF EQUITY SECURITIES

 

 

 

 

Stock Performance Graph

 

The following graph compares the cumulative shareholder return on the Company’s common stock versus the total cumulative return on the S&P 500 Stock Index and the S&P Small Cap 600, Oil & Gas Equipment & Services Sub-Industry Group. The comparison assumes $100 was invested as of December 31, 1999 and all dividends were reinvested.

 

COMPARISON OF 10 YEAR CUMULATIVE TOTAL RETURN*
Among CARBO Ceramics, Inc., The S&P 500 Index
And S&P SmallCap 600 — Oil & Gas Equipment & Services Index

 

 

*$100 invested on 12/31/99 in stock or index, including reinvestment of dividends.

Fiscal year ending December 31.

 

Copyright^© 2010 S&P, a division of The McGraw-Hill Companies Inc. All rights reserved.

 

The following selected financial data are derived from the audited consolidated financial statements of the Company. The data should be read in conjunction with Management’s Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and notes thereto included elsewhere in this Form 10-K. The Company has determined that its outstanding non-vested restricted stock awards are participating securities. Accordingly, effective January 1, 2009, earnings per common share are computed using the two-class method prescribed by ASC Topic 260 “Earnings Per Share.” All previously reported earnings per common share data were retrospectively adjusted to conform to the new computation method.

 

 

 

 

 

 

Executive Level Overview

 

CARBO Ceramics Inc. generates revenue primarily through the sale of products and services to the oil and gas industry. The Company’s principal business consists of manufacturing and selling ceramic proppant for use primarily in the hydraulic fracturing of oil and natural gas wells. On August 28, 2008, the Company entered into a definitive agreement to sell a substantial portion of the assets of its wholly-owned subsidiary, Pinnacle Technologies, Inc. (“Pinnacle”). The sale, which includes all of the fracture and reservoir diagnostic business, the Pinnacle name and related trademarks, was completed on October 10, 2008. The Company has no continuing involvement in these operations. The operations associated with this sale have been classified as income from discontinued operations in the accompanying consolidated statements of income and the cash flows associated with discontinued operations have been segregated in the accompanying consolidated statements of cash flows. The Company retained the hydraulic fracturing simulation software FracProPT, the hydraulic fracturing design, engineering and consulting business and Applied Geomechanics, Inc., a provider of geotechnical monitoring applications.

 

On October 2, 2009, Falcon Technologies, a wholly-owned subsidiary of the Company, purchased substantially all of the assets of BBL Falcon Industries, Ltd., a supplier of spill prevention and containment systems for the oil and gas industry. The acquisition was made for the purpose of expanding the Company’s product and service offerings to its existing client base. Falcon Technologies uses proprietary technology to provide solutions that are designed to enable its clients to extend the life of their storage assets, reduce the potential for hydrocarbon spills and provide containment of stored materials.

The Company’s products and services help oil and gas producers increase production and recovery rates from their wells, thereby lowering overall reservoir development costs. As a result, the Company’s business is dependent to a large extent on the level of drilling activity in the oil and gas industry worldwide. However, the Company has increased its revenues and income over a multiple-year period and across various industry business cycles by increasing its share of the worldwide market for all types of proppant. Although the Company’s ceramic proppants are more expensive than alternative non-ceramic proppants, the Company has been able to demonstrate the cost-effectiveness of its products to numerous operators of oil and gas wells through increased technical marketing activity. The Company believes its future prospects benefit from both an increase in drilling activity worldwide and the desire of industry participants to improve production results and lower their overall development costs.

 

The Company believes international operations will continue to represent an important role in its future growth. In 2002, the Company constructed its first manufacturing facility located outside the United States in the city of Luoyang, China and completed a second production line in 2004 that doubled the capacity of that facility. In 2004, the Company also opened a sales office in Moscow, Russia and established distribution operations in the country. In 2005, the Company broke ground on a new manufacturing facility in the city of Kopeysk, Russia and completed construction of this new facility during the first half of 2007. International revenues represented 24%, 29% and 36% of total revenues in 2009, 2008 and 2007, respectively.

 

Management believes the addition of new manufacturing capacity is critical to the Company’s ability to continue its long-term growth in sales volume and revenue for ceramic proppant. In regards to future expansion, the Company is currently constructing a third production line at its Toomsboro facility that is expected to be completed near the end of 2010 with an annual capacity of 250 million pounds. Although the Company has operated near or at full capacity at times during the previous ten years, the addition of significant new capacity could adversely impact operating profit margins if the timing of this new capacity does not match increases in demand for the Company’s products.

 

Operating profit margin for the Company’s proppant business is principally impacted by manufacturing costs and the Company’s production levels as a percentage of its capacity. Although most direct production expenses have been relatively stable or predictable over time, the Company has experienced recent volatility in the cost of natural gas, which is used in production by the Company’s domestic manufacturing facilities, and bauxite, which is the primary raw material for production of the Company’s high strength ceramic proppant. The cost of natural gas has been a significant component of total monthly domestic direct production expense over the last three years. In an effort to mitigate volatility in the cost of natural gas purchases and reduce exposure to short term spikes in the price of this commodity, the Company contracts in advance for portions of its future natural gas requirements. During 2007, the Company’s long-standing supplier of high strength raw materials exited the business. These materials are used to manufacture high-strength products, CARBOPROP^® and CARBOHSP^®, at the McIntyre, Georgia facility. The delivered cost of bauxite, which represents approximately half of the cost of high strength products, has increased since the Company’s long-standing supplier exited the business. Management anticipates its current supplies of bauxite will be sufficient for 2010, but continues to pursue a long-term source of these materials to complement its strong position in lightweight raw material supplies. Despite the efforts to reduce exposure to changes in natural gas prices and the cost of high strength raw materials, it is possible that, given the significant portion of manufacturing costs represented by these items, gross margins as a percentage of sales may decline and changes in net income may not directly correlate to changes in revenue.

 

As the Company has expanded its operations in both domestic and international markets, there has been an increase in activities and expenses related to marketing, distribution, research and development, and finance and administration. As a result, selling, general and administrative expenses have increased in recent years. In the future, the Company expects to continue to actively pursue new business opportunities by:

 

 

The Company expects that these activities will generate increased revenue; however selling, general and administrative expenses may continue to increase in 2010 from 2009 levels as the Company continues to expand its operations.

 

General Business Conditions

 

The Company’s proppant business is impacted by the number of natural gas wells drilled in North America, where the majority of wells are hydraulically fractured. In markets outside North America, sales of the Company’s products are less dependent on natural gas markets but are influenced by the overall level of drilling and hydraulic fracturing activity. Furthermore, because the decision to use ceramic proppant is based on comparing the higher initial costs to the future value derived from increased production and recovery rates, the Company’s business is influenced by the current and expected prices of natural gas and oil.

 

Worldwide oil and natural gas prices and related drilling activity levels remained very strong from 2004 until the second half of 2008. During the second half of 2008, oil and natural gas prices as well as active drilling rigs in North America declined significantly in connection with declines in many of the world’s economies. Although the North American drilling rig count improved during the second half of 2009, it is not apparent as to whether this is the beginning of a recovery or a short-term correction. Although difficult to predict, the Company does not expect a long-term impact for the Company’s products and services.

 

Critical Accounting Policies

 

The Consolidated Financial Statements are prepared in accordance with accounting principles generally accepted in the U.S., which require the Company to make estimates and assumptions (see Note 1 to the Consolidated Financial Statements). The Company believes that, of its significant accounting policies, the following may involve a higher degree of judgment and complexity.

 

Revenue is recognized when title passes to the customer (generally upon delivery of products) or at the time services are performed. The Company generates a significant portion of its revenues and corresponding accounts receivable from sales to the petroleum pressure pumping industry. In addition, the Company generates a significant portion of its revenues and corresponding accounts receivable from sales to three major customers, all of which are in the petroleum pressure pumping industry. As of December 31, 2009, approximately 62% of the balance in trade accounts receivable was attributable to those three customers. The Company records an allowance for doubtful accounts based on its assessment of collectability risk and periodically evaluates the allowance based on a review of trade accounts receivable. Trade accounts receivable are periodically reviewed for collectability based on customers’ past credit history and current financial condition, and the allowance is adjusted, if necessary. If a prolonged economic downturn in the petroleum pressure pumping industry were to occur or, for some other reason, any of the Company’s primary customers were to experience significant adverse conditions, the Company’s estimates of the recoverability of accounts receivable could be reduced by a material amount and the allowance for doubtful accounts could be increased by a material amount. At December 31, 2009, the allowance for doubtful accounts totaled $2.2 million.

 

The Company values inventory using the weighted average cost method. Assessing the ultimate realization of inventories requires judgments about future demand and market conditions. The Company regularly reviews inventories to determine if the carrying value of the inventory exceeds market value and the Company records an adjustment to reduce the carrying value to market value, as necessary. Future changes in demand and market conditions could cause the Company to be exposed to additional obsolescence or slow moving inventory. If actual market conditions are less favorable than those projected by management, additional lower of cost or market adjustments may be required.

 

Income taxes are provided for in accordance with ASC Topic 740, “Income Taxes” (formerly Statement of Financial Accounting Standards (“SFAS”) No. 109). This standard takes into account the differences between financial statement treatment and tax treatment of certain transactions. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary

differences are expected to be recovered or settled. The effect of a change in tax rates is recognized as income or expense in the period that includes the enactment date. This calculation requires the Company to make certain estimates about its future operations. Changes in state, federal and foreign tax laws, as well as changes in the Company’s financial condition, could affect these estimates.

 

Long-lived assets, which include net property, plant and equipment, goodwill, intangibles and other long-term assets, comprise a significant amount of the Company’s total assets. The Company makes judgments and estimates in conjunction with the carrying values of these assets, including amounts to be capitalized, depreciation and amortization methods and useful lives. Additionally, the carrying values of these assets are periodically reviewed for impairment or whenever events or changes in circumstances indicate that the carrying amounts may not be recoverable. An impairment loss is recorded in the period in which it is determined that the carrying amount is not recoverable. This requires the Company to make long-term forecasts of its future revenues and costs related to the assets subject to review. These forecasts require assumptions about demand for the Company’s products and services, future market conditions and technological developments. Significant and unanticipated changes to these assumptions could require a provision for impairment in a future period.

 

Results of Operations

 

Net Income

 

 

For the year ended December 31, 2009, the Company reported net income of $52.8 million, a decrease of 52% compared to the previous year. Net income in 2008 reflected $5.8 million in income from discontinued operations and $44.1 million in gain from the disposal of discontinued operations. Discontinued operations relate to the sale of the Company’s fracture and reservoir diagnostics business in 2008.

 

In 2009, income from continuing operations decreased to $52.8 million from $60.4 million in 2008, or 13%. During 2009, the Company experienced a 12% decrease in revenues primarily resulting from lower sales volumes. The decrease in revenue was partially offset by an increase in gross profit margin as a percentage of sales compared to the previous year. Selling, general and administrative expenses increased primarily due to the addition of Falcon Technologies and the relocation of certain administrative offices. Other operating expenses decreased in 2009 primarily resulting from an impairment charge in 2008 and costs relating to the 2008 start-up of certain manufacturing facilities. Other income in 2009 decreased mainly from foreign currency exchange rate fluctuations and income tax expense in 2009 decreased due to lower taxable income partially offset by a higher effective tax rate.

 

For the year ended December 31, 2008, the Company reported net income of $110.3 million, an increase of 105% compared to the previous year. Net income in 2008 benefitted from a $44.1 million gain from the disposal of discontinued operations. Income from discontinued operations was $5.8 million in 2008 and $4.2 million in 2007.

 

In 2008, income from continuing operations increased to $60.4 million from $49.6 million in 2007, or 22%. The Company experienced a 29% increase in revenues in 2008, which represented the sixth consecutive year the Company achieved a new revenue record. The increase in revenues was partially offset by a decline in gross profit margin as a percentage of sales compared to the previous year. Selling, general and administrative expenses increased to support revenue growth, and other operating expenses in 2008 include an impairment charge relating to the write-off of a prepayment for the purchase of ceramic proppant from a Chinese proppant manufacturer. Other income in 2008 decreased mainly from foreign currency exchange rate fluctuations and income tax expense in 2008 increased due primarily to higher taxable income.

 

Individual components of financial results are discussed below.

 

Revenues

 

Revenues of $341.9 million for the year ended December 31, 2009 decreased 12% compared to $387.8 million in 2008. Revenues decreased primarily due to a 10% decrease in sales volume and a 2% decrease in average proppant selling price. The Company’s worldwide proppant sales volume totaled 1.043 billion pounds for the year ended December 31, 2009 compared to 1.162 billion pounds for the same period in 2008. Despite a 42% decrease in the drilling rig count in the U.S. and Canada, sales volume in that region decreased by only 8%. Sales volume decreases for most of the Company’s products in the U.S. and Canada were partially offset by greater demand for the Company’s lightweight products, such as CARBOHYDROPROP^® in shale formations. International (excluding Canada) sales volume decreased 20% primarily attributed to decreases in Russia and North Africa partially offset by an increase in Mexico. The average selling price per pound of ceramic proppant was $0.315 per pound in 2009 compared to $0.322 per pound in 2008. The lower average selling price was primarily attributed to a change in the mix of products sold toward lower priced lightweight products.

 

Revenues of $387.8 million for the year ended December 31, 2008 exceeded revenues of $300.0 million in 2007 by 29%. Revenues increased primarily due to a 28% increase in proppant sales volume. The Company’s worldwide proppant sales volume increased for the sixth consecutive year to 1.162 billion pounds and exceeded the 2007 sales record of 908 million pounds by 28%. North American sales volume increased 33% over 2007, driven by the continued strength in the U.S. market and the introduction of CARBOHYDROPROP^® in early 2008. Increases in sales volume in Canada of 14% were partially offset by a decrease in Mexico. Overseas sales volume increased 5% led by a 61% increase in Russia, which is due to the start-up of a manufacturing plant in that market during the second quarter of 2007. This increase was offset by the impact of other overseas sales which declined 13% in 2008 compared to 2007. The average selling price per pound of ceramic proppant was $0.322 per pound in 2008 compared to $0.321 per pound in 2007.

 

Gross Profit

 

 

The Company’s cost of sales related to proppant manufacturing consists of manufacturing costs, packaging and transportation expenses associated with the delivery of the Company’s products to its customers and handling costs related to maintaining finished goods inventory and operating the Company’s remote stocking facilities. Variable manufacturing costs include raw materials, labor, utilities and repair and maintenance supplies. Fixed manufacturing costs include depreciation, property taxes on production facilities, insurance and factory overhead.

 

Gross profit for the year ended December 31, 2009 was $120.5 million, or 35% of revenues, compared to $127.4 million, or 33% of revenues, for 2008. The decrease in gross profit was the result of decreased revenues driven primarily by lower sales volumes. Despite the revenue and gross profit decline, gross profit as a percentage of revenues increased primarily as a result of a change in the mix of products sold, lower freight costs and lower natural gas costs in the Company’s U.S. manufacturing facilities.

 

Gross profit for the year ended December 31, 2008 was $127.4 million, or 33% of revenues, compared to $101.9 million, or 34% of revenues, for 2007. The increase in gross profit was the result of increased revenues driven primarily by higher sales volumes. Despite the revenue and gross profit growth, gross profit as a percentage of revenues declined primarily as a result of lower-margin sales in Russia, sales of lower-margin CARBOHYDROPROP^® during the period of initial introduction into the marketplace, higher manufacturing costs in the Company’s U.S. plants primarily resulting from increases in the cost of natural gas and raw materials, and increased freight to transport products to customer locations.

Selling, General & Administrative (SG&A) and Other Operating Expenses

 

 

Operating expenses consisted of $40.9 million of SG&A expenses and $0.1 million of other operating expenses for the year ended December 31, 2009 compared to $37.6 million and $2.7 million, respectively, for 2008. As a percentage of revenues, SG&A and other operating expenses increased to 12% compared to 10% for the same period in 2008. The increases in SG&A expenses primarily resulted from the inclusion of Falcon Technologies SG&A in 2009, costs associated with the relocation of certain administrative offices and Falcon Technologies acquisition costs. Other operating expenses in 2008 consisted primarily of a $1.4 million write-off of a prepayment for the purchase of ceramic proppant from a third-party proppant manufacturer and $1.1 million relating to start-up costs for the second production line at the Company’s Toomsboro, Georgia facility and the reopening of the New Iberia, Louisiana manufacturing facility idled earlier in 2008.

 

Operating expenses consisted of $37.6 million of SG&A expenses and $2.7 million of other operating expenses for the year ended December 31, 2008, compared to $29.0 million and $1.5 million, respectively, for 2007. As a percentage of revenues, SG&A and other operating expenses remained unchanged at 10% in 2008 and 2007. SG&A expenses increased primarily because of global marketing activity and administrative expenses supporting revenue growth. Other operating expenses of $2.7 million for the year ended December 31, 2008 consisted primarily of a $1.4 million write-off of a prepayment for the purchase of ceramic proppant from a third-party proppant manufacturer and $1.1 million relating to start-up costs for the second production line at the Company’s Toomsboro, Georgia facility and the reopening of the New Iberia, Louisiana manufacturing facility idled earlier in 2008. Other operating expenses of $1.5 million for the year ended December 31, 2007 consisted of $1.2 million relating to start-up costs associated with the Company’s new manufacturing facility in Russia and a $0.3 million loss related to equipment disposals.

 

Other Income (Expense)

 

 

Other income for the year ended December 31, 2009 declined $0.9 million compared to the same period in 2008. This decline is mainly attributed to a $0.8 million decrease in foreign currency exchange gains resulting from exchange rate fluctuations between the local reporting currency and the currency in which certain liabilities of the Company’s subsidiary in Russia are denominated. The Company recognizes gains and losses resulting from fluctuations in these currencies as a result of the capital structure of its investment in that country. By the end of 2008, the Company had restructured its investment in Russia thereby limiting income statement exposure to future changes in currency exchange rates.

 

Other income for the year ended December 31, 2008 declined $1.8 million compared to 2007 primarily due to a $2.6 million decrease in foreign currency exchange gains resulting from the reduction during 2008 in intercompany liabilities that were subject to exchange rate fluctuations. This reduction in foreign currency gains was partially offset by a $0.5 million increase in gains resulting from changes in exchange rates between the functional currency and the foreign currency in which the effective transactions were denominated.

 

Income Tax Expense

 

Consolidated income tax expense was $27.0 million, or 33.8% of pretax income, for the year ended December 31, 2009 compared to $27.9 million, or 31.6% of pretax income for 2008. The $0.9 million decrease is due to lower pretax income partially offset by an increase in the effective tax rate primarily due to benefits relating to mining depletion deductions that the Company recorded during the third quarter of 2008.

 

Consolidated income tax expense was $27.9 million, or 31.6% of pretax income, for the year ended December 31, 2008 compared to $24.9 million, or 33.4% of pretax income for 2007. The decrease in the effective tax rate is primarily due to the additional tax benefits associated with the depletion of kaolin minerals owned by the Company discussed above. In addition, the effective tax rate declined in part due to the final preparation and filing of the Company’s prior year tax returns.

 

Discontinued Operations

 

 

On August 28, 2008, the Company entered into a definitive agreement to sell its fracture and reservoir diagnostics business, including the Pinnacle name and related trademarks. The resulting gain on sale and operations of this business are presented as discontinued operations. The sale was completed on October 10, 2008 for $142.3 million in cash, net of working capital adjustments. The Company recorded a gain of $44.1 million, which is net of income taxes of $24.4 million. The Company did not record any income from discontinued operations in 2009.

 

Liquidity and Capital Resources

 

At December 31, 2009, the Company had cash and cash equivalents of $69.6 million compared to cash and cash equivalents of $154.8 million at December 31, 2008. During 2009, the Company generated $22.1 million of cash from operating activities of continuing operations, which is net of $70.5 million used for income tax payments associated with the sale of discontinued operations on October 10, 2008, third and fourth quarter 2008 estimated tax payments that were deferred to 2009 as a result of hurricane Gustav tax relief, and 2009 taxable income. The Company also generated $0.9 million from employee exercises of stock options and retained $0.2 million cash from excess tax benefits relating to stock based compensation to employees. Uses of cash included $46.1 million of capital spending, $23.0 million for the acquisition of the assets of BBL Falcon Industries, Ltd., $16.3 million of cash dividends, $22.7 million for the repurchase of the Company’s common stock and $0.3 million from the effect of exchange rate changes on cash. Major capital spending in 2009 included engineering and procurement on a third production line at the Toomsboro facility, equipment relating to the resin-coating process at the New Iberia facility, and replacement of various equipment associated with the McIntyre facility.

 

The Company believes its operating results for 2010 will continue to be influenced by the level of natural gas drilling in North America but expects its ability to demonstrate the value of ceramic proppant relative to alternatives will allow it to continue to generate new sales opportunities. Although the North American drilling rig count improved during the third and fourth quarters of 2009, it is not apparent whether this is the beginning of a recovery or a short-term correction. The Company believes the steep natural gas decline curves in North America will eventually help in bringing supply and demand more into balance; however, the timing of a sustainable recovery in the oil and gas industry is difficult to pinpoint.

 

Subject to its financial condition, the amount of funds generated from operations and the level of capital expenditures, the Company’s current intention is to continue to pay quarterly dividends to holders of its common stock. On January 19, 2010, the Company’s Board of Directors approved the payment of a quarterly cash dividend of $0.18 per share to shareholders of the Company’s common stock on February 1, 2010. The dividend is payable on February 16, 2010. The Company estimates its total capital expenditures in 2010 will be between $70.0 million and $78.0 million, which include costs associated with completion of the previously announced construction of the

Company’s third production line at its Toomsboro, Georgia facility. The Company currently anticipates that the project will be completed near the end of 2010.

 

The Company has historically maintained an unsecured line of credit of $10.0 million. That line of credit expired as of December 31, 2009; however, in January 2010 the Company secured another $10.0 million line of credit with Wells Fargo Bank, N.A. The Company anticipates that cash on hand, cash provided by operating activities and funds available under its line of credit will be sufficient to meet planned operating expenses, tax obligations, capital expenditures and other cash needs for the next 12 months. The Company also believes that it could acquire additional debt financing, if needed. Based on these assumptions, the Company believes that its fixed costs could be met even with a moderate decrease in demand for the Company’s products.

 

Off-Balance Sheet Arrangements

 

The Company had no off-balance sheet arrangements as of December 31, 2009.

 

Contractual Obligations

 

The following table summarizes the Company’s contractual obligations as of December 31, 2009:

 

 

See Note 6 and Note 15 to the Notes to the Consolidated Financial Statements.

 

Operating lease obligations relate primarily to railroad equipment leases and include leases of other property, plant and equipment.

 

The Company uses natural gas to power its domestic manufacturing plants. From time to time, the Company enters into contracts to purchase a portion of the anticipated natural gas requirements at specified prices. As of December 31, 2009, the last such contract was due to expire in December 2012.

 

The Company has entered into contracts to supply raw materials, primarily kaolin and bauxite, to each of its manufacturing plants. Each of the contracts is described in Note 15 to the Notes to the Consolidated Financial Statements. Four of the contracts do not require the Company to purchase minimum annual quantities, but do require the purchase of minimum annual percentages, ranging from 70% to 100% of the respective plants’ requirements for the specified raw materials. One outstanding contract requires the Company to purchase a minimum annual quantity of material.

 

 

The Company’s major market risk exposure is to foreign currency fluctuations that could impact its investments in China and Russia. As of December 31, 2009, the Company’s net investment that is subject to foreign currency fluctuations totaled $77.6 million, and the Company has recorded a cumulative foreign currency translation loss of $5.2 million, net of deferred income tax benefit. This cumulative translation loss is included in Accumulated Other Comprehensive Loss. From time to time, the Company may enter into forward foreign

exchange contracts to hedge the impact of foreign currency fluctuations. There were no such foreign exchange contracts outstanding at December 31, 2009.

 

The Company has a $10.0 million line of credit with a commercial bank. Under the terms of the revolving credit agreement, the Company may elect to pay interest at either a fluctuating base rate established by the bank from time to time or at a rate based on the rate established in the London inter-bank market. There were no borrowings outstanding under the previous agreement at December 31, 2009. The Company does not believe that it has any material exposure to market risk associated with interest rates.

 

 

The information required by this Item is contained in pages F-3 through F-23 of this Report.

 

 

Not applicable.

 

 

(a) Evaluation of Disclosure Controls and Procedures

 

Disclosure controls and procedures are designed to ensure that information required to be disclosed in the reports filed or submitted under the Securities Exchange Act of 1934 (the “Exchange Act”) is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed in the reports filed under the Exchange Act is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

As of December 31, 2009, management carried out an evaluation, under the supervision and with the participation of the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s disclosure controls and procedures. There are inherent limitations to the effectiveness of any system of disclosure controls and procedures. Accordingly, even effective disclosure controls and procedures can only provide reasonable assurances of achieving their control objectives. Based upon and as of the date of that evaluation, the Chief Executive Officer and Chief Financial Officer have concluded that the Company’s disclosure controls and procedures were effective to ensure that information required to be disclosed by the Company in the reports it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms, and to ensure that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

(b) Management’s Report on Internal Control Over Financial Reporting

 

For Management’s Report on Internal Control Over Financial Reporting, see page F-1 of this Report.

 

(c) Report of Independent Registered Public Accounting Firm

 

For the Report of Independent Registered Public Accounting Firm on the Company’s internal control over financial reporting, see page F-2 of this Report.

 

(d) Changes in Internal Control Over Financial Reporting

 

There were no changes in the Company’s internal control over financial reporting during the quarter ended December 31, 2009, that materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

Not applicable.

 

Certain information required by Part III is omitted from this Report. The Company will file a definitive proxy statement pursuant to Regulation 14A (the “Proxy Statement”) not later than 120 days after the end of the fiscal year covered by this Report and certain information included therein is incorporated herein by reference. Only those sections of the Proxy Statement that specifically address the items set forth herein are incorporated by reference. Such incorporation does not include the Compensation Committee Report included in the Proxy Statement.

 

 

Information concerning executive officers under Item 401 of Regulation S-K is set forth in Part I of this Form 10-K. The other information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Security Ownership of Certain Beneficial Owners and Management,” “Election of Directors,” “Board of Directors, Committees of the Board of Directors and Meeting Attendance,” “Code of Business Conduct and Ethics,” “Section 16(a) Beneficial Ownership Compliance” and “Report of the Audit Committee.”

 

 

The information required by this Item is incorporated by reference to the portions of the Company’s Proxy Statement entitled “Compensation of Executive Officers,” “Director Compensation” and “Potential Termination and Change in Control Payments.”

 

 

The information required by this Item is incorporated by reference from the Company’s Proxy Statement under the captions “Securities Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information.”

 

 

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Election of Directors.”

 

 

The information required by this Item is incorporated by reference to the portion of the Company’s Proxy Statement entitled “Ratification of Appointment of the Company’s Independent Registered Public Accounting Firm.”

 

 

(a) Exhibits, Financial Statements and Financial Statement Schedules:

 

1. Consolidated Financial Statements

 

The Consolidated Financial Statements of CARBO Ceramics Inc. listed below are contained in pages F-3 through F-23 of this Report:

 

 

2. Consolidated Financial Statement Schedules

 

Schedule II — Consolidated Valuation and Qualifying Accounts is contained on page S-1 of this Report. All other schedules have been omitted since they are either not required or not applicable.

 

3. Exhibits

 

The exhibits listed on the accompanying Exhibit Index are filed as part of, or incorporated by reference into, this Report.

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

CARBO Ceramics Inc.

 

Gary A. Kolstad

President and Chief Executive Officer

 

Ernesto Bautista III

Vice President and

Chief Financial Officer

 

Dated: February 26, 2010

 

POWER OF ATTORNEY

 

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Gary A. Kolstad and Ernesto Bautista III, jointly and severally, his attorneys-in-fact, each with the power of substitution, for him in any and all capacities, to sign any amendments to this Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

 

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external reporting purposes in accordance with generally accepted accounting principles.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Management, including our Chief Executive Officer and our Chief Financial Officer, assessed the effectiveness of the Company’s internal control over financial reporting as of December 31, 2009. In making this assessment, it used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control — Integrated Framework. Based on its assessment and those criteria, management has concluded that the Company maintained effective internal control over financial reporting as of December 31, 2009.

 

The Company’s independent registered public accounting firm, Ernst & Young LLP, has issued an attestation report on the Company’s internal control over financial reporting. That report is included herein.

 

The Board of Directors and Shareholders
CARBO Ceramics Inc.

 

We have audited CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (the COSO criteria). CARBO Ceramics Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, CARBO Ceramics Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2009, based on the COSO criteria.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2009, and 2008, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2009 and our report dated February 26, 2010 expressed an unqualified opinion thereon.

 

 

New Orleans, Louisiana
February 26, 2010

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Shareholders
CARBO Ceramics Inc.

 

We have audited the accompanying consolidated balance sheets of CARBO Ceramics Inc. as of December 31, 2009 and 2008, and the related consolidated statements of income, shareholders’ equity, and cash flows for each of the three years in the period ended December 31, 2009. Our audits also included the financial statement schedule listed in the Index at Item 15(a). These financial statements and schedule are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements and schedule based on our audits.

 

We conducted our audits in accordance with standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of CARBO Ceramics Inc. at December 31, 2009 and 2008, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2009, in conformity with U.S. generally accepted accounting principles. Also, in our opinion, the related financial statement schedule, when considered in relation to the basic financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

 

As discussed in Note 1 to the consolidated financial statements, in 2008 the Company changed its method of accounting for inventories.

 

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), CARBO Ceramics Inc.’s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated February 26, 2010 expressed an unqualified opinion thereon.

 

 

New Orleans, Louisiana
February 26, 2010

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF INCOME

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF SHAREHOLDERS’ EQUITY

 

 

See accompanying notes to consolidated financial statements.

CARBO CERAMICS INC.

 

CONSOLIDATED STATEMENTS OF CASH FLOWS