Attached files

file filename
EX-5.1 - EX-5.1 - BAETA CORPv209931_ex5-1.htm
EX-23.1 - EX-23.1 - BAETA CORPv209931_ex23-1.htm
EX-10.25 - EX-10.25 - BAETA CORPv209931_ex10-25.htm
EX-10.12.27 - EX-10.12.27 - BAETA CORPv209931_ex10-12x27.htm
EX-10.12.25 - EX-10.12.25 - BAETA CORPv209931_ex10-12x25.htm
EX-10.12.21 - EX-10.12.21 - BAETA CORPv209931_ex10-12x21.htm
EX-10.12.26 - EX-10.12.26 - BAETA CORPv209931_ex10-12x26.htm
EX-10.12.22 - EX-10.12.22 - BAETA CORPv209931_ex10-12x22.htm
EX-10.12.28 - EX-10.12.28 - BAETA CORPv209931_ex10-12x28.htm
EX-10.12.24 - EX-10.12.24 - BAETA CORPv209931_ex10-12x24.htm
S-1 - S-1 - BAETA CORPv209931_s1.htm


Project Order #1

Statement of Work #1.23

Submitted by


Extranome, Inc.
253 Warren Avenue
Fort Lee, NJ 07024
Phone: 201 969-1651
Fax: 201 969-1651

August 1, 2010

 
 

 

Baeta Corp – Project Order #1 Statement Of Work

Table of Contents

1
Statement of Work
3
2
Scope of work
3
3
Expectations from Vendor
4
4
Expectations from Client
5
5
Intellectual Property
5
6
Change Management
5
7
Plan and Schedule
6
8
Pricing
6
9
Terms and Conditions
6
10
Support Files
    

Extranime, Inc Proprietary – Confidential
 
Page 2 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work

Statement of Work
 
This Statement of Work for Project Order #1 (“Project Order #1”) is made and entered into as of this 1st day of November 2008 (the “Effective Date”), by and between Extranome Inc. (hereinafter referred to as "Vendor"), and Baeta Corp, (hereinafter referred to as “Client”) (collectively, the “Parties”). This Project Order #1 is governed by the terms and conditions set forth herein and in the Agreement # soft.2/11012008 from November 1, 2008.  In the event of a conflict between the Agreement # soft.2/11012008 from November 1, 2008 and this Project Order #1, the terms and conditions of this Project Order #1 shall prevail.

Scope of work

The scope of work is defined in the separate Software Requirements Specifications (SRS), technical part defined as part of design documentation (DD) and all time lines and milestones are defined by LOE and Project Plans per agreed scope of work.
 
Actual tasks completed in July 2010:
 
MyHealthTrends for Weight Control and MyHealthTrends for Pain (98%)
Quality Assurance efforts
 
None

Development efforts of maintenance the current SW
 
None

Scope 11 HHC v5 Accelerometer Data
 
Following features have been implemented in Firmware v5.1.0 within report period:
Capture the stream of acceleration samples and passing the stream into host via Interrupt-in transfers.
Recording the acceleration samples on device data flash memory.

The PC Software to analyze raw acceleration samples still not completed due to the high priority tasks were requested .by Customer (Scope 13: Merge patient & Practitioner SW).
 
Scope 13: Merge Patient & Practitioner SW
 
A development team (two resources) worked on the tasks related to the first phase of scope. The working schedule including the completion status on July 30, 2010 follows.

Extranime, Inc Proprietary – Confidential
 
Page 3 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
ITOPS efforts [SEC]
 
IT maintenance for PROD and QA environments has been performed.
 
Baeta Marketing Pages Repository (1%)
 
ITOPS efforts
 
IT maintenance for PROD and QA environments has been performed.

MyHealthID (1%)
 
ITOPS efforts
 
IT maintenance for PROD and QA environments is performed.

Tasks planned to be performed in August 2010
 
ITOPS maintenance
 
Perform IT maintenance for products “MHT for Pain”, “MHT for Weight Control”, “MyHealthID”, “Baeta Marketing Pages Repository”, hosted in QA and PROD environment.

“MyHealthTrends for Weight Control” and “MyHealthTrends for Pain”

Complete Phase 1 of “Scope 13 – Merge Patient and Practitioner PC SW” and pass first release to QA.

Start Phase 2 of “Scope 13 – Merge Patient and Practitioner PC SW”

Assembly electronic widget will get used in tests of the batteries lifetime for HHC devices v3.1. Perform the tests and provide results to Customer.

3 Expectations from Vendor

 
1.
All Vendor personnel will be provided with a computer having a configuration adequate to perform their respective tasks.
 
 
2.
Vendor will furnish weekly status reports. These reports will be based on the tasks assigned to and performed by them.
 
 
3.
Vendor will bring to the notice of Client any issue, technical or otherwise that may be a potential risk to the task to be performed and will keep Client informed of the remediation steps taken to mitigate such risks.
 
 
4.
Vendor’s team will interact closely with the Client at all stages of the Project.
 
Extranime, Inc Proprietary – Confidential
 
Page 4 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work

 
5.
Vendor will recommend changes to the environment, including the use of newer releases of the system and framework software, if it can justify that such changes will result in a better end product.
 
 
6.
Vendor will ensure that the work they do can be verified and audited.
 
 
7.
Vendor will provide all required environment for the work and support by IT&S team for smooth development as needed unless dedicated resources required.
 
4 Expectations from Client

 
1.
Client will determine the prioritization of the tasks to be performed.
 
 
2.
Client will provide all assistance required in the understanding of the scope during the entire length of the Project.
 
 
3.
Client will cover, after mutual agreement, all costs for specific software, systems, machines, technologies and licenses which are not part of standard development tools and technologies and specific to Baeta Corp. work.
 
 
4.
Client will cover all travel related expenses and travel allowance at actual costs if this is required and approved by Baeta Corp.
 
Intellectual Property

Intellectual Property of all work undertaken on behalf of Client shall vest with Baeta Corp.
 
Change Management

Once a design document has been approved by Client, all changes in the scope of work will have to be approved by both parties after due consideration to the impact that it may have on the schedule and effort. Such changes may result in the financial considerations for the Project to be revised.

Extranime, Inc Proprietary – Confidential
 
Page 5 of 7

 

Baeta Corp – Project Order #1 Statement Of Work

Plan and Schedule

The plan for developing of the application as stated in the section Scope of Work is as follows:
 
 
1.
Extranome, Inc. will have assigned software engineers and designers for the projects personnel at their own premises.
 
 
2.
All work will be performed based on separate Software Requirements Specifications and Project Plans.
 
Pricing

The statement of work performs as time and materials (T&M) agreement with initial team of:
 
 
·
1 Project Manager
 
 
·
1 Technical Lead / Senior Software Developer
 
 
·
1 Graphic Designer
 
 
·
2 Software Engineers
 
The cost of initial team is $30,000 per month. The costs covers costs of labor, base work environment and license costs. All specific to the project licenses, machines, parts or equipment are additional to this cost.
 
Any additional resources are subject to a separate agreement or $50 per hour with prior agreement by the Client.
 
Terms and Conditions

The work is based on 40 hours week, 12 months a year excluding official holidays and vacations, from 9:00am EST to 5:00pm EST schedule. All vacation and holidays will be communicated to the Client in advance and if this is required - Vendor will provide adequate replacement during the member(s) leave of absence.
 
Extranime, Inc Proprietary – Confidential
 
Page 6 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
/s/ LEONID PUSHKANTSER
 
/s/ ALEXANDER GAK, MD
 
       
By: /s/
   
By: /s/
   
Baeta Corp.
 
Extranome, Inc
 
       
       
       
Len Pushkanster
     
Baeta Corp.
1 Bridge Plaza Suite 275
Fort Lee, NJ 07024
Phone: 201.471.0988
 
Alexander Gak
    
Extranome, Inc.
253 Warren Av
Fort Lee, NJ 07024
Phone: 201.969.1651
 
 
Extranime, Inc Proprietary – Confidential
 
Page 7 of 7