Attached files

file filename
EX-5.1 - EX-5.1 - BAETA CORPv209931_ex5-1.htm
EX-23.1 - EX-23.1 - BAETA CORPv209931_ex23-1.htm
EX-10.25 - EX-10.25 - BAETA CORPv209931_ex10-25.htm
EX-10.12.23 - EX-10.12.23 - BAETA CORPv209931_ex10-12x23.htm
EX-10.12.27 - EX-10.12.27 - BAETA CORPv209931_ex10-12x27.htm
EX-10.12.25 - EX-10.12.25 - BAETA CORPv209931_ex10-12x25.htm
EX-10.12.26 - EX-10.12.26 - BAETA CORPv209931_ex10-12x26.htm
EX-10.12.22 - EX-10.12.22 - BAETA CORPv209931_ex10-12x22.htm
EX-10.12.28 - EX-10.12.28 - BAETA CORPv209931_ex10-12x28.htm
EX-10.12.24 - EX-10.12.24 - BAETA CORPv209931_ex10-12x24.htm
S-1 - S-1 - BAETA CORPv209931_s1.htm
 

 
Project Order #1

Statement of Work #1.21

Submitted by


Extranome, Inc.
253 Warren Avenue
Fort Lee, NJ 07024
Phone: 201 969-1651
Fax: 201 969-1651

June 1, 2010
 
 
 

 
 
Baeta Corp – Project Order #1 Statement Of Work

Table of Contents

1
Statement of Work
    3  
2
Scope of work
    3  
3
Expectations from Vendor
    5  
4
Expectations from Client
    6  
5
Intellectual Property
    6  
6
Change Management
    6  
7
Plan and Schedule
    6  
8
Pricing
    7  
9
Terms and Conditions
    7  
10
Support Files
       
 
Extranime, Inc Proprietary – Confidential
 
Page 2 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
1
Statement of Work
 
This Statement of Work for Project Order #1 (“Project Order #1”) is made and entered into as of this 1st day of November 2008 (the “Effective Date”), by and between Extranome Inc. (hereinafter referred to as "Vendor"), and Baeta Corp, (hereinafter referred to as “Client”) (collectively, the “Parties”). This Project Order #1 is governed by the terms and conditions set forth herein and in the Agreement # soft.2/11012008 from November 1, 2008.  In the event of a conflict between the Agreement # soft.2/11012008 from November 1, 2008 and this Project Order #1, the terms and conditions of this Project Order #1 shall prevail.
 
2
Scope of work
 
The scope of work is defined in the separate Software Requirements Specifications (SRS), technical part defined as part of design documentation (DD) and all time lines and milestones are defined by LOE and Project Plans per agreed scope of work.
 
Tasks completed in May 2010
 
 
2.1
MyHealthTrends for Weight Control and MyHealthTrends for Pain (98%)
 
 
2.1.1
Quality Assurance efforts
 
Following releases have been tested:

 
·
MyHealthTrends for Pain
 
o
Server S/W v3.1.30, Client S/W v3.1.6.25 in QA environment
 
·
MyHealthTrends for Weight Control
 
o
Server S/W v3.1.30, Client S/W v3.1.6.25 in QA environment

New bugs opened in May 2010:

3792
tri Monthly Craving charts look incomplete
3841
nor Incorect email address for automatically generated email accounts
3842
nor Suspect events are uploaded from device
3844
nor Looping issue on register new device
3845
enh Add support for HHC v3.1.4 (New Protocol rev.G)
3846
min Null Pointer Exception thrown in HhcConsole application
 
Extranime, Inc Proprietary – Confidential
 
Page 3 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
 
2.1.2
Development efforts
 
The following bugs and enhancements have been resolved and implemented:
 
3706
min Issue with HTML tags in comments
3710
nor [MP] Patient's device is not presented in Practitioner device list
3711
nor [MP] JS Error in IE when Practitioner view report for specified Patient
3713
tri [MP] Issue with password recovery e-mail letter
3715
tri [MP] Can't view "Available Actions" for device when user name is long
3792
tri Monthly Craving charts looks wrong
3841
nor Incorrect email address for automatically generated email accounts
3842
nor Suspect events are uploaded from device
3844
nor Looping issue on register new device
3845
enh Add support for HHC v3.1.4 (New Protocol rev.G)
3846
min Null Pointer Exception thrown in HhcConsole application
 
 
2.1.3
ITOPS efforts
 
IT maintenance for PROD and QA environments performed.
 
 
2.1.4
Enhancements: Scope 11 – HHC v5.1
 
 
·
Firmware v 3.1.4 has been released. Devices flashed with this FW now support Device Upgrade Firmware protocol.
 
·
Development of PC Software to program naked devices v3.1 during manufacturing process (high priority task) started.
 
·
Three prototype boards of HHC v5.1 have been assembled.
 
·
Continued coding of FW v5.1. It completion has been delayed due to high priority tasks.
 
·
Continued development of PC Software to analyze raw acceleration data. Completion has been delayed due to high priority tasks.
 
 
2.2
Baeta Marketing Pages Repository (1%)
 
 
2.2.1
ITOPS efforts
 
IT maintenance for PROD and QA environments performed.
 
 
2.3
MyHealthID (1%)
 
 
2.3.1
ITOPS efforts
 
IT maintenance for PROD and QA environments performed.
 
Extranime, Inc Proprietary – Confidential
 
Page 4 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
Tasks planned for June 2010
 
 
2.4
ITOPS maintenance
 
Perform IT maintenance for products “MHT for Pain”, “MHT for Weight Control”, “MyHealthID”, “Baeta Marketing Pages Repository”, hosted in QA and PROD environment.
 
 
2.5
“MyHealthTrends for Weight Control” and “MyHealthTrends for Pain”
 
Complete release of Server S/W v3.1.31 and Client S/W v3.1.6.26 for both products and pass it to QA and PROD environment.

Continue bug fixing for bugs still not resolved in previous builds and for new bugs to be revealed during QA phase.

Perform QA for new releases.

Tasks for “Scope 11 – HHC v5.1”:
 
·
Complete firmware HHC v5.1.1 to allow accumulation and upload of raw acceleration data into PC and to support second events.
 
·
Complete PC Software to analyze raw acceleration data.
 
·
Complete PC Software to program naked devices v3.1 during manufacturing phase and pass it to Customer.
 
3
Expectations from Vendor
 
1.
All Vendor personnel will be provided with a computer having a configuration adequate to perform their respective tasks.
 
2.
Vendor will furnish weekly status reports. These reports will be based on the tasks assigned to and performed by them.
 
3.
Vendor will bring to the notice of Client any issue, technical or otherwise that may be a potential risk to the task to be performed and will keep Client informed of the remediation steps taken to mitigate such risks.
 
4.
Vendor’s team will interact closely with the Client at all stages of the Project.
 
5.
Vendor will recommend changes to the environment, including the use of newer releases of the system and framework software, if it can justify that such changes will result in a better end product.
 
6.
Vendor will ensure that the work they do can be verified and audited.
 
7.
Vendor will provide all required environment for the work and support by IT&S team for smooth development as needed unless dedicated resources required.
 
Extranime, Inc Proprietary – Confidential
 
Page 5 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
4
Expectations from Client
 
1.
Client will determine the prioritization of the tasks to be performed.
 
2.
Client will provide all assistance required in the understanding of the scope during the entire length of the Project.
 
3.
Client will cover, after mutual agreement, all costs for specific software, systems, machines, technologies and licenses which are not part of standard development tools and technologies and specific to Baeta Corp. work.
 
4.
Client will cover all travel related expenses and travel allowance at actual costs if this is required and approved by Baeta Corp.
 
5
Intellectual Property
 
Intellectual Property of all work undertaken on behalf of Client shall vest with Baeta Corp.
 
6
Change Management
 
Once a design document has been approved by Client, all changes in the scope of work will have to be approved by both parties after due consideration to the impact that it may have on the schedule and effort. Such changes may result in the financial considerations for the Project to be revised.
 
7
Plan and Schedule
 
The plan for developing of the application as stated in the section Scope of Work is as follows:
 
1.
Extranome, Inc. will have assigned software engineers and designers for the projects personnel at their own premises.
 
2.
All work will be performed based on separate Software Requirements Specifications and Project Plans.
 
Extranime, Inc Proprietary – Confidential
 
Page 6 of 7

 
 
Baeta Corp – Project Order #1 Statement Of Work
 
8
Pricing
 
The statement of work performs as time and materials (T&M) agreement with initial team of:
 
 
·
1 Project Manager
 
 
·
1 Technical Lead / Senior Software Developer
 
 
·
1 Graphic Designer
 
 
·
2 Software Engineers
 
The cost of initial team is $30,000 per month. The costs covers costs of labor, base work environment and license costs. All specific to the project licenses, machines, parts or equipment are additional to this cost.
 
Any additional resources are subject to a separate agreement or $50 per hour with prior agreement by the Client.
 
9
Terms and Conditions
 
The work is based on 40 hours week, 12 months a year excluding official holidays and vacations, from 9:00am EST to 5:00pm EST schedule. All vacation and holidays will be communicated to the Client in advance and if this is required - Vendor will provide adequate replacement during the member(s) leave of absence.
 
/s/ LEONID PUSHKANTSER
 
/s/ ALEXANDER GAK, MD
     
By:/s/
   
By: /s/
 
Baeta Corp.
 
Extranome, Inc
     
     
     
Len Pushkanster
 
Alexander Gak
Baeta Corp.
 
Extranome, Inc.
1 Bridge Plaza Suite 275
 
253 Warren Av
Fort Lee, NJ 07024
 
Fort Lee, NJ 07024
Phone: 201.471.0988
 
Phone: 201.969.1651
 
Extranime, Inc Proprietary – Confidential
 
Page 7 of 7