General Development of Business

Omnitek Engineering, Corp., a California corporation, began operations on October 10, 2001, and was a spin-off from Nology Engineering, Inc., a manufacturer in the automotive aftermarket parts industry and the developer/manufacturer of the patented “HotWires” spark plug wires. We currently conduct our business activities at our offices at 1333 Keystone Way, Suite 101, Vista, California, 92081, which consists of approximately 25,000 square feet of industrial space. 

Omnitek has never filed for bankruptcy and has never been subject to receivership or similar proceedings.

Omnitek’s common stock is currently trading on the OTC Bulletin Board (“OTCQB”) marketplace under the symbol OMTK.

Financial Information

The audited financial statements for the fiscal years ended December 31, 2019 and 2018 are attached hereto as Item 8 in this annual report.

Business of Issuer

Omnitek develops and sells a proprietary technology to convert diesel engines to an alternative fuel, new natural gas engines, and complementary products. Omnitek products are available for stationary applications and the global transportation markets, which includes light commercial vehicles, minibuses, heavy-duty trucks, municipal buses, as well as rail and marine applications. The technology can be applied for compressed natural gas (“CNG”), liquefied natural gas (“LNG”), or renewable natural gas (“Biogas” or “RNG”), as well as liquid petroleum gas (“Propane” or LPG”).

The technology Omnitek has developed can be used to convert most diesel engines to an alternative fuel at a cost lower than that required to purchase a new alternative fuel engine.

Engine conversions in the United States are subject to U.S. Environmental Protection Agency (“EPA”) or California Air Resources Board (“CARB”) approvals. The cost for converting an engine ranges from $15,000 to $35,000, depending on the engine model, exclusive of the cost of the natural gas storage system and labor. Engine conversions in certain foreign countries may require less sophisticated emission control components, resulting in

Page 4

substantially reduced costs ranging from $3,000 to $15,000, depending on the engine model and application, again exclusive of the fuel storage system and labor. There has been a shift in demand for engine conversions, from domestic to international markets due primarily to higher diesel prices in those markets. With the price disparity between diesel and natural gas still a market driver, mostly as a result of higher taxes on diesel fuel, the Company anticipates the majority of its business to come from international markets for the foreseeable future. Additionally, it is expected that the 200-nation “Paris Agreement on Climate Change” and other local regulations designed to lower air pollution, will further increase demand for Omnitek’s technology, with foreign fleet conversions outpacing the domestic market until domestic diesel prices increase.

The Company believes it is well-positioned in both global and domestic markets to capitalize on the increasing awareness of environmental concerns, and believes it has a cost advantage over new natural gas vehicles and other available technologies for the heavy-duty engine market.

In addition to the engine conversion cost, fleets also have to consider the cost of the fuel storage tanks on the vehicle. This cost varies depending on the gas storage volume needed and the fuel tank technology used but can range from $2,000 for a single tank system, up to $50,000 for a multi-tank system for heavy-duty class 8 over the road trucks.

Omnitek can also deliver complete new natural gas engines when local emission standards, or other conditions, require the use of new engines.

(1)Principal Products or Services. 

At this time the Omnitek product line includes:

·A conversion kit for converting diesel engines to run on an alternative fuel; 

·New complete natural gas engines; 

·A high-pressure natural gas coalescing filter; and 

·Natural gas components. 

Conversion Kits - Omnitek offers a solution to convert diesel engines to operate on an alternative fuel, including CNG, LNG, RNG and LPG. This engine conversion technology is the primary product offered by Omnitek. This product is packaged in kit form and is offered in two basic variations. One is designed to work on engines with a turbocharger and the other is designed to work on engines without a turbocharger.

Diesel engines have a service life of up to 20 years and require regular engine overhauls. A diesel engine conversion is not unlike an engine overhaul. Therefore, the Company’s engine conversion system enables a fleet to “overhaul/convert” its diesel engines into an alternative fuel during its normally scheduled engine overhaul, thereby reducing overall operating costs and emissions.

Diesel engine conversions offer fleet operators the opportunity to secure their investment and capitalize on the long-life of diesel engines.

At this time the Company has received US, EPA approval for the Navistar DT466E and DT530E engines, and a Certificate of Conformity for the Mack E7, Detroit Diesel Series 60 and Caterpillar 3406E, C15, C15 ACERT and C16 engine models.

On June 23, 2015, the European Union issued a EURO VI Certificate for a 12-liter natural gas engine manufactured by TEDOM and equipped with the Omnitek proprietary technology.

In addition to the Conversion Kits, Omnitek sells the individual component replacement parts for the conversion kits. The high-pressure natural gas coalescent filter is our top-selling replacement part, which is also supplied to certain new natural gas vehicle manufacturers (“OEM”) as original equipment.

Page 5

The key to the success of Omnitek’s technology is performance and reliability, which is achieved using the Company’s patented fuel mixing device and a proprietary electronic control unit which senses engine parameters in real time and instantly makes fuel mixture adjustments to deliver the correct amount of fuel and the correct ignition timing.

Omnitek does not perform installation of the conversion kits directly, but rather trains dealers and sub-dealers around the world to perform the engine conversions using its technology. Four to five days of training are required for a dealer or sub-dealer to become proficient to perform the engine conversion. Furthermore, Omnitek has established a strategic alliance with Minneapolis, Minnesota-based engine remanufacturer Reviva to produce remanufactured and converted drop-in ready natural gas engines, and a strategic alliance with LKQ Corporation (Nasdaq: LKQ) to produce drop-in ready natural gas engines at the company’s facility in Monterrey, Mexico, to address the market for natural gas engines in Mexico

Most diesel engines can be converted using Omnitek’s technology, however, there is no assurance that diesel vehicle owners will elect to convert their diesel engines to an alternative fuel. Additionally, while the Company is not aware of any other company offering solutions for heavy duty diesel engine conversions that can compete with our patented technology at this time, competitors could develop such technology and there are no guarantees that the owners of the engines would choose the Omnitek conversion technology over our competitors’ technology to convert their engines.

New Natural Gas Engines - Under certain conditions it is not cost effective, or technologically feasible, to convert used diesel engines to operate on natural gas. Also, there are times when local emission standards may dictate the use of highly sophisticated technology that cannot be easily retrofitted to an older engine. Under those conditions, we can deliver a new purpose-built natural gas engine.

Natural Gas Components – Omnitek supplies natural gas engine components to new engine manufacturers and aftermarket customers. The high-pressure natural gas coalescent filter is used by OE vehicle manufacturers around the world.

(2)Markets 

Worldwide

The Company has the ability to sell and deliver its products anywhere in the world through its network of distributors, system integrators, fleet operators, engine conversion companies and directly to end-users. The Company's conversion technology has been used to convert heavy-duty diesel engines to operate on natural gas worldwide since 2001and has been successfully adapted to work with many different engine designs and configurations. More than 5,000 engines have been converted worldwide utilizing the Omnitek technology.

The majority of our markets can best be divided into two groups:

1.Countries not requiring compliance with emissions standards, or no standards are in place (therefore emissions certification is not necessary - shorter time to market); or, 

2.Countries that require compliance with emissions standards (emissions certification is necessary - longer time to market and more costly). 

The governments of many countries with an indigenous supply of natural gas encourage the use of their domestic fuel supply and may offer incentives to convert vehicles currently running on diesel, which is expected to increase demand for our product in those regions.

When contacted, we approach the issue of “converting or replacing” high-polluting diesel engines by offering two main options, which in large part is influenced by the level of technological capabilities within the country, emission requirements, and financial feasibility.

Page 6

The first option is focused on working with local companies in an effort to convert diesel engines to natural gas. Alternatively, we can supply new dedicated natural gas engines as a second option.

To achieve the conversions, we can supply engineering support to rebuild and convert the engines locally. This offers an economic benefit to the local economy by keeping the rebuild work in the community.

In the second scenario, we would supply brand new low-polluting, natural gas engines. This may be a better option when the existing engines are based on old and outdated technology and/or strict emissions standards are in place.

United States

Engine conversions in the United States are subject to regulations imposed by the U.S. Environmental Protection Agency (“EPA”), and with regard to conversions within the state of California, the California Air Resources Board (“CARB”).

In 2011, the EPA announced new regulations applicable to certifying and converting diesel and gasoline engines to operate on an alternative fuel. This was a milestone for the alternative fuel industry and a significant advancement in lessening the United States dependence on foreign oil. Converting diesel engines to operate on either CNG, LNG, RNG or LPG provides an economical and environmental solution to costly new engine replacements. These new EPA regulations have made it possible for Omnitek to certify and convert diesel engines in a cost-effective manner and introduce the technology to the U.S. market.

In 2014 CARB posted final regulations and guidelines to certify alternative fuel engine conversion systems for use in California, offering a pathway to certify our technology for use in California.

At this time the Company has received US, EPA approval for the Navistar DT466E and DT530E engines, and a Certificate of Conformity for the Mack E7, Detroit Diesel Series 60 and Caterpillar 3406E, C15, C15 ACERT and C16 engine models.

(3)Distribution Methods of the Products or Services. 

Omnitek has distributors in many countries which market and distribute its products. The Company is continuously seeking additional global distribution partners to expand its distribution network. In certain markets, the Company competes against other companies with greater resources, more established distribution channels and other competitive advantages, and the success of these competitors may harm our ability to generate revenues. Please see the section entitled “Competition” below and also the relevant Risk Factors in ITEM 1A below.

Distribution Agreements. From time to time, Omnitek may enter into exclusive or non-exclusive distribution agreements with its dealers, distributors or authorized diesel-to-natural gas engine conversion kit installation centers (“AIC”).

Internet. Our products, as well as information regarding new product introductions and company news, are available online at our website, www.omnitekcorp.com.

(4)Status of any publicly announced new developments, product or services. 

Further detail to following announcements can be found at http://www.omnitekcorp.com/news.htm

On October 09, 2018, Omnitek announced it has finalized the development of a 420 hp 13-liter heavy-duty natural gas engine. The engine, equipped with Omnitek’s patented engine management system components and a highly efficient catalytic converter, exceeded EURO 6 emissions requirements and will be utilized to power EURO 6 certified trucks and buses. Omnitek will be the exclusive OE supplier of key natural gas engine management system components required for the engine to meet the EURO 6 emissions standard.

Page 7

In 2019, Omnitek continued development activities on this engine to increase the performance to 450 hp and meet EURO 6 emissions.

On July 17, 2019, Omnitek announced its exclusive distributor in Turkey is ramping up marketing and sales initiatives based on the conclusion of several evaluation projects, including a successful six-month pilot program with Shell Turkey, to demonstrate the reliability and performance of diesel-to-natural gas (DNG) engine conversions. The converted heavy-duty Mercedes Axor OM457 engine, equipped with Omnitek’s proprietary DNG engine conversion technology, exhibits the same 400 hp performance utilizing LNG as with diesel fuel

Throughout the year, the Company supplied its existing customers around the world with conversion kits and components.

(5)Competitive business conditions and the Company’s competitive position in the industry and methods of competition. 

We believe our products have many important advantages, some of which are performance, ease of use, and lower cost. We compete in a small segment of the transportation and energy arena. Most of the larger multinational corporations do not offer a complete solution for the markets the Company services. We believe that competition in these markets is principally based on the quality of the product, performance, reliability and price. Because of the Company’s limited financial resources, Omnitek could be at a competitive disadvantage compared to other suppliers of competitive products.

Competition - Diesel-to-Natural Gas Engine Conversions.

The Company encounters competing products in countries where no emission standards are enforced, and where carbureted systems are still being used such as China, India, Bangladesh, Peru and others. These systems can be used to convert low-power diesel engines found in these countries. When converting emissions controlled high-power engines, as found in the USA and Western Europe, a fuel injection system, like the Omnitek system, must be used.

As of today, the Company is not aware of any direct competitors offering a similar and extensive range of engine conversion kits for heavy-duty diesel engines required to meet US EPA or European EU emissions standards. Suppliers like Westport Innovations, Bosch and Keihin, just to name a few, supply mainly original equipment engine manufacturers and do not offer complete systems to convert diesel engines.

There are numerous companies, such as BRC, Landirenzo, Tartarini, OMVL, Tomasetto, just to name a few, supplying natural gas components for use on gasoline cars and small trucks. These technologies have been on the market for many years and millions of vehicles have been converted worldwide using these technologies. However, this technology is not suitable to convert heavy-duty diesel engines, and is not in direct competition with Omnitek’s technology. At this time, Omnitek is not planning to compete in the small-engine market.

Competition - Dual Fuel Technology

The dual fuel technology, where natural gas is mixed with diesel and both fuels are used at the same time, offers minimal cost savings potential and is not considered a competing technology.

Competition - New Natural Gas Engines.

Under certain conditions it is not cost effective, or technologically feasible, to convert used diesel engines to operate on natural gas. Emission standards sometimes dictate the use of highly sophisticated technology that cannot be easily retrofit onto an engine. For those situations, Omnitek offers purpose-built new natural gas engines which can be used in buses, trucks, generators and other stationary applications.

Page 8

As of the time of this report there are a very limited number of new natural gas engine suppliers. In the United States only Cummins Westport offers EPA/CARB certified heavy-duty natural gas engines for trucks and buses. In Europe and China, we find IVECO, Scania, MAN and Weichai, just to name a few. We believe that additional competitors will emerge as this market matures.

(6)Sources and availability of Raw Materials and Principal Suppliers 

Omnitek does not utilize any specialized raw materials. We rely on nonaffiliated suppliers for various standard and customized components and on manufacturers of assemblies that are incorporated into our products. We do not have long-term supply or manufacturing agreements with suppliers of raw materials, components and assemblies.  In some instances, alternative sources may be limited. If these suppliers or manufacturers experience financial, operational, manufacturing capacity, or quality assurance difficulties, or cease production and sale of such products, or if there is any other disruption in our relationships with these suppliers or manufacturers, we will be required to locate alternative sources of supply. Our inability to obtain sufficient quantities of these components, if and as required in the future, may subject us to:

·delays in delivery or shortages in components that could interrupt and delay manufacturing and result in cancellations of orders for our products; 

·increased component prices and supply delays as we establish alternative suppliers; inability to develop alternative sources for product components; 

·required modifications of our products, which may cause delays in product shipments, increased manufacturing costs, and increased product prices; and, 

·increased inventory costs as we hold more inventory than we otherwise might in order to avoid problems from shortages or discontinuance, which may result in write-offs if we are unable to use all such products in the future. 

During the year ended December 31, 2019, five suppliers accounted for 86% of products purchased compared with the year ended December 31, 2018, where four suppliers accounted for 82% of products purchased.

See Risk Factors Item “Dependence on a limited number of qualified suppliers of components and equipment could lead to delays, lost revenue or increased costs.”

(7)Dependence on one or few major customers. 

The Company believes that the diversity of the product line offered alleviates the dependence on any customer. Through a widespread use of our product line, Omnitek is striving to develop a wide base of customers. During the year ended December 31, 2019 seven customers accounted for approximately 74% of sales. During the year ended December 31, 2018, seven customers accounted for approximately 73% of sales.

Page 9

(8)Patents, trademarks, licenses, franchises, concessions, royalty agreements or labor contracts, including duration. 

Omnitek owns the following Patents and Trademarks:

US Patents:

Trademarks:

The protection of proprietary rights relating to Omnitek’s products and expertise is critical for the business. Omnitek intends to file additional patent applications to protect certain technology and improvements considered important to the development of the Company’s business. The Company also intends to rely upon trade secrets, know-how, continuing technological innovation and licensing opportunities to develop and maintain its competitive position. 

Although the Company intends to seek patent protection for its proprietary technology and products in the United States and in foreign countries, the patent positions of our products, are generally uncertain and involve complex legal and factual questions. Consequently, we do not know whether any of the patent applications that we have and will consider filing will result in the issuance of any patents, or whether such patent applications will be circumvented or invalidated. There can be no assurance that all United States patents that may pose a risk of infringement can or will be identified. Additionally, Omnitek has not sought to identify foreign patent applications that might affect existing patent applications currently on file with the Unites States Patent and Trademark Office. If we are unable to obtain licenses where we may have infringed on other patents, we could encounter delays in product market introductions while attempting to design around such intellectual property rights, or we could find that the development, manufacture or sale of products requiring such licenses could be prevented. In addition, we could incur substantial costs in defending suits brought against us on such intellectual property rights or prosecuting suits which the Company brings against other parties to protect its intellectual property rights. Competitors or potential competitors may have filed applications for or have received patents and may obtain additional patents and proprietary rights relating to, compounds or processes competitive with those of Omnitek. See number 5 above, “Competitive business conditions and the Company’s competitive position in the industry and methods of competition.”

The Company relies on certain patented and unpatented trade secrets for a significant part of its intellectual property rights, and there can be no assurance that others will not independently develop substantially equivalent proprietary information and techniques, or otherwise gain access to our trade secrets or disclose such technology, or that Omnitek can meaningfully protect its rights to its unpatented trade secrets. We intend to require each of our employees, consultants and advisors to execute confidentiality agreements either upon the commencement of an employment or consulting relationship with Omnitek or at a later time. There can be no assurance, however, that these agreements will provide meaningful protection for Omnitek’s trade secrets in the event of unauthorized use or disclosure of such information.

We do not believe that any of our products or other proprietary rights infringe upon the rights of third parties. However, there can be no assurance that others may not assert infringement claims against Omnitek in the future and we recognize that any such assertion may require us to incur legal and other defense costs, enter into compromise royalty arrangements, or terminate the use of some technologies. Further, we may be required to incur legal and other costs to protect our proprietary rights against infringement by third parties.

Page 10

Licenses and Royalty Agreements

We have not entered into any license and royalty agreements which have resulted in royalty payments.

Other Agreements

As part of the build-out of the U.S. and international dealer network, the Company has entered into agreements with various companies in the USA and foreign countries.

(9)Need of any governmental approval of principal products or services. 

Omnitek’s engine conversion technology as applied in the United States is subject to approval from the EPA and CARB within the State of California.

Currently Omnitek has received EPA approval and certification for our diesel-to-natural gas conversion technology for the heavy-duty Navistar DT466E and DT530E up to model year 2003, Mack E7E engines up to model year 2006, all Detroit Diesel Series 60 engine families for model years 1988 to 2009, and the Caterpillar 3406E/C15 engine families for model years 1993 to 2006.

(10)Effect of existing or probable governmental regulations on the business. 

See item number 9, immediately above, for a discussion of EPA and CARB regulation.

Omnitek is subject to the requirements of Regulation 13A under the Exchange Act, which require us to file with the Securities and Exchange Commission (the “Commission”), annual reports on Form 10-K, quarterly reports on Form 10-Q, and current reports on Form 8-K, and all other obligations of the Exchange Act applicable to issuers with stock registered pursuant to Section 12(g). We are also subject to Regulation 14A of the Securities Exchange Act of 1934, as amended (the “1934 Act”), which regulates proxy solicitations.

Management believes that these reporting obligations increase the Company’s annual legal and accounting costs by an estimated $37,000 and $36,000, for the last two fiscal years, 2019 and 2018, respectively.

Omnitek is not aware of any other governmental regulations now in existence or that may arise in the future that would have an effect on the Company’s business.

(11)Research and Development. 

Research and development expenditures for the last two fiscal years, 2019 and 2018, were $106,916 and $106,896 respectively, and were comprised of charges for engine certification testing, purchase of equipment and parts for R&D, and the cost of personnel in the development of products and services.

In some cases, Omnitek is contracted to develop a specific engine or component. In these cases, Omnitek requires an up-front payment from the customer.

Omnitek will certify additional engine models as needed. The cost to develop and certify a specific engine model can reach $125,000.

(12)Costs and effects of compliance with environmental laws. 

Except as discussed above in item number 9, our business activities are not subject to any environmental laws and we do not anticipate that our future business activities will subject the Company to any environmental compliance regulations.

Page 11

(13)Number of total employees and number of full-time employees. 

As of the date of this report, we employ a total of eight persons, all of whom are full-time employees. These full-time employees include Werner Funk and Richard Miller, who are also officers and directors of Omnitek. We believe we have a good working relationship with our employees, who are not represented by a collective bargaining organization, and there no organized labor agreements or union agreements between Omnitek and any employees.

We are outsourcing certain services that are not proprietary in nature. We intend to continue to use the services of independent consultants and contractors to perform various professional services. We believe that this use of third-party service providers will enhance our ability to contain general and administrative expenses.

Reports to Security Holders

The public may read and copy any materials the Company files with the SEC at the SEC’s public reference room at 100 F Street, NE, Washington D.C. 20549, on official business days during the hours of 10 a.m. to 3 p.m. Eastern Time. Information may be obtained on the operation of the public reference room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at http://www.sec.gov. Moreover, the Company maintains a website at http://www.omnitekcorp.com that contains important information about Omnitek. This information is publicly available and is updated regularly.

FORWARD-LOOKING STATEMENTS

An overall economic downturn could negatively impact our earnings.

Any weakening of economic activity in our markets could result in a loss of customers, which could adversely affect our revenues or restrict our future growth. It may become more difficult for customers to pay their bills, leading to slow collections and higher-than-normal levels of accounts receivable. This could increase our financing requirements and bad debt expense. The foregoing could negatively affect earnings and liquidity, reducing our ability to grow the business.

The price of oil, which also effects the price of diesel and gasoline, can have a significant impact on the Company’s business. As the price differential between diesel and natural gas decreases the payback period for the cost of the engine conversion is extended. This makes the engine conversion less desirable, which can result in lower sales of the Company’s engine conversion technology.

Page 12

A global pandemic may disrupt our business or the business of our customers.

The COVID-19 coronavirus, originating in China, has spread to a number of other countries, including the United States.  The occurrence of an uncontrollable event such as the COVID-19 pandemic is likely to negatively affect our operations. Efforts to contain the spread of the coronavirus have intensified, including social distancing, travel bans and quarantine, and this has limited access to our facilities, customers, management, support staff and professional advisors. These, in turn, will not only impact our operations, financial condition and demand for our products and services but our overall ability to react timely to mitigate the impact of this event. Also, it will substantially hamper our efforts to provide our investors with timely information and comply with our filing obligations with the Securities and Exchange Commission.

Unforeseeable circumstances could delay or disrupt our operations and negatively impact our operating results and financial condition.

Fire,  riot, strikes, labor disputes, freight embargoes  or transportation  delays, acts of God or of the public enemy, war, acts or threats of terrorism,  or civil disturbances, extreme weather conditions or natural disasters such as floods, earthquakes, hurricanes and tsunamis, and their related consequences and effects, including energy shortages and public health issues, any existing or future laws, rules, regulations  or acts of any government (including  any orders, rules or regulations  issued by any official or agency or such government), or any cause beyond the Company’s reasonable control (each a “Force Majeure Event”), affecting  our business, could delay or disrupt our operations, and the operations of our vendors, other suppliers and their operations or result in economic instability that may negatively impact our operating results and financial condition.

Increases in the wholesale price of natural gas could reduce our earnings.

A supply and demand imbalance in natural gas markets could cause an increase in the price of natural gas. Recently, the increased production of U.S. shale natural gas has put downward pressure on the wholesale cost of natural gas; accordingly, restrictions or regulations on shale gas production could cause natural gas prices to increase. Additionally, the Commodity Futures Trading Commission (CFTC) under the 2010 Dodd-Frank Wall Street Reform and Consumer Protection Act has regulatory authority of the over-the-counter derivatives markets. Regulations affecting derivatives could increase the price of natural gas. A significant increase in the price of natural gas may discourage the conversion from diesel to natural gas.

Climate change, carbon neutral or energy efficiency legislation or regulations could restrict our market opportunities, negatively affecting our growth, cash flows and earnings.

The federal and/or state governments may enact legislation or regulations that attempt to control or limit the causes of climate change, including greenhouse gas emissions such as carbon dioxide and emissions of methane. Such laws or regulations could impose additional costs or operational requirements. They could also provide a cost advantage to alternative energy sources. The focus on climate change could negatively impact the reputation of fossil fuel products or services. The occurrence of these events could put upward pressure on the cost of natural gas relative to other energy sources, reduce the demand for natural gas, negatively affecting our growth opportunities, cash flows and earnings.

The 200-nation “Paris Agreement on Climate Change” signed into law in 2016 signals a strong call to action with more than 175 countries committing to large emission reductions over the next 15 years. This may help to accelerate demand for Omnitek’s technology as countries around the world begin to enact air pollution control measures, in some cases banning diesel trucks and buses in large cities.

We are subject to physical and financial risks associated with climate change.

Climate change can create physical and financial risk. Climate change may impact a region’s economic health, which could impact our revenues. Our financial performance is tied to the health of the regional economies we serve. The price of energy has an impact on the economic health of our communities. The cost of additional regulatory requirements, such as regulation of CO₂ emissions under section 111(d) of the CAA, or additional environmental regulation could impact the prices charged by natural gas suppliers.

Page 13

A downturn in the truck industry or other factors negatively affecting any of our truck OEM customers could materially adversely impact our results of operations.

If the truck market or any truck OEM customers worldwide suffers a significant downturn such circumstance could lead to significant reductions in our revenues and earnings, commercial disputes, receivable collection issues, and other negative consequences that could have a material adverse impact on our results of operations.

Unpredictability in the adoption, implementation and enforcement of increasingly stringent emission standards by multiple jurisdictions around the world could adversely affect our business.

Our components and engines may be subject to extensive statutory and regulatory requirements governing emission and noise, including standards imposed by the EPA, the European Union, state regulatory agencies, such as CARB, and other regulatory agencies around the world. We have made, and may be required to continue to make, significant capital and research expenditures to comply with these regulations. Developing engines and components to meet numerous changing government regulatory requirements, with different implementation timelines and requirements, makes developing components and engines efficiently for multiple markets complicated and could result in substantial additional costs that may be difficult to recover in certain markets. In some cases, we may be required to develop new products to comply with new regulations, particularly those relating to air emissions. While we have met previous deadlines, our ability to comply with other existing and future regulatory standards will be essential for us to maintain our position in the markets we serve. The successful development and introduction of new and enhanced products in order to comply with new regulatory requirements are subject to other risks, such as delays in product development, cost over-runs and unanticipated technical and manufacturing difficulties.

In addition to these risks, the nature and timing of government implementation and enforcement of increasingly stringent emission standards in emerging markets are unpredictable and subject to change. Any delays in implementation or enforcement could result in the products we developed or modified to comply with these standards becoming unnecessary or becoming necessary later than expected thereby, in some cases, negating our competitive advantage. This in turn can delay, diminish or eliminate the expected return on capital and research expenditures that we have invested in such products and may adversely affect our perceived competitive advantage in being an early, advanced developer of compliant engines.

We are exposed to risks arising from the price and availability of energy.

The level of demand for our products and services is influenced in multiple ways by the price and availability of energy. High diesel costs generally drive greater demand for natural gas and LPG engines in countries in which we operate. If diesel costs decrease or increase less than expected, demand for our products may likewise decrease. The relative unavailability of electricity in some emerging market countries also influences demand for our products for electric generators. If these countries add energy capacity by expanding their power grids at a rate equal to or faster than the growth in demand for energy, the demand for our genset products could also decrease or increase less than would otherwise be the case.

The market for alternative fuel engines may not continue to develop according to our expectations and, as a result, our business may not grow as planned and our business plan may be adversely affected.

Our future growth is dependent upon the market for efficient alternative fuel engines and engine conversion kits expanding as a result of our customers and potential customers substituting diesel engines with alternative fuel engines. Part of our business plan is dependent on our market forecasts with respect to this expected substitution trend. However, there can be no assurance that we can accurately predict this trend. Furthermore, there can be no assurance that our products would capture any portion of the potential market increase. If the markets which represent a significant portion of our business or in which we anticipate significant growth opportunities for our products, fail to develop or develops more slowly than we anticipate, the growth of our business and our business plan could be materially adversely affected.

We may have difficulty managing the expansion of our operations.

Page 14

In order to effectively manage our operations and growth, including growth in the sales of, and services related to, our power systems, we may need to:

·scale our internal infrastructure, including establishing additional facilities, while continuing to provide technologically sophisticated power systems on a timely basis; 

·attract and retain sufficient numbers of talented personnel, including application engineers, customer support staff and production personnel; 

·continue to enhance our compliance and quality assurance systems; and 

·continue to improve our operational, financial and management controls and reporting systems and procedures. 

Rapid expansion of our operations could place a strain on our senior management team, support teams, manufacturing lines, information technology platforms and other resources. In addition, we may be required to place more reliance on our strategic partners and suppliers, some of whom may not be capable of meeting our production demands in terms of timing, quantity, quality or cost. Difficulties in effectively managing the budgeting, forecasting and other process control issues presented by any rapid expansion could harm our business, prospects, results of operations or financial condition.

New products, including new engines we develop, may not achieve widespread adoption.

Our growth may depend on our ability to develop and/or acquire new products, and/or refine our existing products and technology. We will generally seek to develop or acquire new products, or enhance our existing products and power system technology, if we believe they will provide significant additional revenues and favorable profit margins. However, we cannot know beforehand whether any new or enhanced products will successfully penetrate our target markets. There can be no assurance that newly developed or acquired products will perform as well as we expect, or that such products will gain widespread adoption among our customers.

Additionally, there are greater design and operational risks associated with new products. The inability of our suppliers to produce technologically sophisticated components for our new engines and power systems, the discovery of any product or process defects or failures associated with production of any new products and any related product returns could each have a material adverse effect on our business, financial condition and results of operations. If new products for which we expend significant resources to develop or acquire are not successful, our business could be adversely affected.

Changes in environmental and regulatory policies could hurt the market for our products.

Our business is affected by government environmental policies, mandates and regulations around the world, most significantly with respect to emission standards. Examples of such regulations include those that (1) restrict the sale of engines that do not meet emission standards, and (2) impose penalties on sellers of non-compliant engines. There can be no assurance that these policies, mandates and regulations will be continued or expanded as assumed in our growth strategy. Incumbent industry participants with a vested interest in gasoline and diesel, many of which have substantially greater resources than we do, may invest significant resources in an effort to influence environmental regulations in ways that delay or repeal requirements for more stringent carbon, particulate matter and other emissions.

We generally must obtain certification from the EPA or CARB to sell our engines and engine conversion kits in the United States. We may attempt to expand sales of our engines and engine conversion kits to other countries with strict emissions regulations. Accordingly, future sales of our product will depend upon them being certified to meet the existing and future air quality and energy standards imposed by the relevant regulatory agencies. While we incur significant research and developments costs to ensure that our products comply with emission standards and meet certification requirements in the regions where our products are sold, we cannot provide assurance that our products will continue to meet these standards. The failure to comply with certification

Page 15

requirements would not only adversely affect future sales but could result in the recall of our products or civil or criminal penalties.

The adoption of new, more stringent and burdensome government emission regulations, whether at the foreign, federal, state, or local level, in markets in which we supply our products, may require modification of our emission certification and other manufacturing processes. Thus, we might incur unanticipated expenses in meeting future compliance requirements and may be required to increase our research and product development expenditures. Increases in such costs and expenses could necessitate increases in the prices we charge our customers for our product, which could adversely affect demand for them.

We maintain a significant investment in inventory, and a decline in our customers’ purchases could lead to a decline in our sales and profitability and cause us to accumulate excess inventory.

We cannot always predict the timing, frequency or size of the future orders of our customers. Our ability to accurately forecast our sales is further complicated by the continuing global economic uncertainty. We maintain significant inventories in an effort to ensure that our customers have a reliable source of supply. If we fail to anticipate the changing needs of our customers and accurately forecast our customer demands, our customers may not continue to place orders with us, and we may accumulate significant inventories of products that we will be unable to sell or return to our suppliers. This may result in a significant decline in the value of our inventory and a decrease in our future gross profit.

Our financial position, results of operations and cash flows have been, and may in the future be, negatively impacted by challenging global economic conditions.

Challenging global economic conditions have had, and may in the future have, a material adverse effect on our business. Difficult market conditions can also cause us to experience pricing pressure, negatively impacting our margins.

Economic downturns may materially impact our customers, as well as suppliers and other parties with which we do business. Economic conditions that adversely affect our customers may cause them to terminate existing supply agreements or to reduce the volume of product they purchase from us in the future. We may have significant receivables owing from customers that face liquidity issues. Failure to collect a significant portion of amounts due on those receivables could have a material adverse effect on our results of operations and financial condition. Similarly, with adverse market conditions, our key suppliers from which we source components may be unable to provide components to us or extend us credit. Furthermore, we may not be able to successfully anticipate, plan for and respond to changing economic conditions, and our business could be negatively affected.

Fuel price differentials are hard to predict and may have an adverse impact on the demand for our products in the future.

The prices of various fuel alternatives are subject to fluctuation, based upon many factors, including changes in resource bases, pipeline transportation capacity for natural gas, refining capacity for crude oil and government excise and fuel tax policies. The price differential among various fuel alternatives can impact customers and their decisions to buy product from us.

The volatility of oil and gas prices may affect our stock price.

While our company develops systems for engines, we may be affected by the price of oil and gas. The investing public may categorize our stock with other fuel or alternative energy stocks, thus the volatility of the price of oil and gas may affect the price of our stock. In particular, when the price of oil declines, diesel becomes a more favorable fuel and alternative fuel products suffer as a result. This, as with any commodity volatility, will occur from time to time and may adversely affect the price of our stock.

We could suffer warranty claims or be subject to product liability claims, both of which could materially and adversely affect our business.

Page 16

From time to time, we may incur liabilities for warranty claims as a result of defective products or components, including claims arising from defective products or components provided by our suppliers that are integrated into our conversion kits. The provisions we make for warranty accrual may not be sufficient or we may be unable to rely on a warranty provided by a third-party manufacturer, and we may recognize additional expenses as a result of warranty claims in excess of our current expectations. Such warranty claims may necessitate a redesign, re-specification, a change in manufacturing processes, and/or recall of our product, which could have an adverse impact on our finances and on existing or future sales of our products. Even in the absence of any warranty claims, a product deficiency such as a manufacturing defect or a safety issue may necessitate a product recall, which could have an adverse impact on our finances and on existing or future sales.

Our business exposes us to potential product liability claims that are inherent to our industry. Any accidents involving our products could materially impede widespread market acceptance and demand for our products. In addition, we may be subject to a claim by end-users of our products or others alleging that they have suffered property damage, personal injury or death because our products did not perform adequately. Such a claim could be made whether or not our products perform adequately under the circumstances. From time to time, we may be subject to product liability claims in the ordinary course of business, and we carry a limited amount of product liability insurance for this purpose. However, our current insurance policies may not provide sufficient or any coverage for such claims, and we cannot predict whether we will be able to maintain our insurance coverage on commercially acceptable terms.

If we do not properly manage the sales of our products into foreign markets, our business could suffer.

We have sales and distribution activities in counties where we may lack sufficient expertise, knowledge of local customs or contacts. There can be no assurance that we will be able to maintain our current relationship with these foreign customers, or that we will be able to develop effective, similar relationships in foreign markets into which we supply our products in the future.

Growing the market for our products in markets outside of the United States may take longer and cost more to develop than we anticipate and is subject to inherent risks, including unexpected changes in government policies, trade barriers restricting our ability to sell our products in those countries, longer payment cycles, exposure to currency fluctuations, and foreign exchange controls that restrict or prohibit repatriation of funds. As a result, if we do not properly manage foreign sales, our business could suffer.

In addition, our foreign sales subject us to numerous stringent U.S. and foreign laws, including the Foreign Corrupt Practices Act (“FCPA”), and comparable foreign laws and regulations which prohibit improper payments or offers of payments to foreign governments and their officials and political parties by U.S. and other business entities for the purpose of obtaining or retaining business. Safeguards that we may implement to discourage these practices could prove to be ineffective, and violations of the FCPA and other laws may result in severe criminal or civil sanctions, or other liabilities or proceedings against us, including class action lawsuits and enforcement actions from the SEC, Department of Justice and overseas regulators. Any of these factors, or any other international factors, could impair our ability to effectively sell our power systems, or other products or services that we may develop, outside of the U.S.

The price of our stock may be volatile and may decline in value.

The trading price of our common stock may be highly volatile and could be subject to wide fluctuations in response to various factors, some of which are beyond our control. The stock market in general has experienced extreme price and volume fluctuations that have often been unrelated or disproportionate to the operating performance of companies with securities traded in those markets. Broad market and industry factors may seriously affect the market price of companies’ stock, including ours, regardless of actual operating performance. In addition, in the past, following periods of volatility in the overall market and the market price of a particular company’s securities, securities class action litigation has often been instituted against these companies. This litigation, if instituted against us, could result in substantial costs and a diversion of our management’s attention and resources.

Business, political and economic factors may affect our operations, the manner in which we conduct our business and our rate of growth.

Page 17

If the World economic conditions deteriorate or do not improve, our target consumer base may be disproportionately affected. Stagnant economic growth is likely to negatively affect our customers' ability to purchase our goods. The resulting impact of such economic conditions on our customers and on consumer spending could have a material adverse effect on demand for our products and on our business, financial condition and operating results.

Our performance is influenced by a variety of economic, social, and political factors

Our performance is influenced by a variety of economic, social, and political factors. Economic uncertainty, unfavorable employment levels, declines in consumer confidence, increases in consumer debt levels, increased commodity prices, and other economic factors may affect our customer spending on Omnitek products and adversely affect the demand for our products. Economic conditions also affect governmental political and budgetary policies. As a result, economic conditions can have an effect on the sale of our products to our customers.

A global economic crisis could result in decreases in customer spending

We operate in competitive and evolving markets locally, nationally and globally. These markets are subject to rapid technological change and changes in demand. In seeking market acceptance, we will encounter competition from many sources, including other well-established and dominant larger providers such as Bosch, Siemens, Cummings, Volvo and Mercedes. Many of these competitors have substantially greater financial, marketing and other resources than Omnitek. Our revenue could be materially adversely affected if we are unable to compete successfully with these other providers.

There is uncertainty relating to the ability of the company to enforce its rights under certain dealer agreements

Many of the dealer agreements are with foreign entities and are governed by the laws of foreign jurisdictions. If a dealer breaches a dealer agreement, we will incur the additional costs of determining our rights and obligations under the agreement, under applicable foreign laws, and enforcing the agreement in a foreign jurisdiction. Many of the jurisdictions to which dealer agreements are subject do not have sophisticated and/or impartial legal systems and we may face practical difficulties in enforcing any of our rights in such jurisdictions. We may not be able to enforce such rights or may determine that it would be too costly to enforce such rights. In addition, some of the dealer agreements contain arbitration provisions that govern disputes under the agreements and there is uncertainty with respect to the enforceability of such arbitration provisions under the laws of related foreign jurisdictions. If a dispute were to arise under a dealer agreement and the related arbitration provision was not effective, we would be exposed to the additional costs of settling the dispute through traditional legal avenues rather than through an arbitration process.

The Company may be subject to other third-party intellectual property rights claims

Companies in our industry often own large numbers of patents, copyrights, trademarks and trade secrets and frequently enter into litigation based on allegations of infringement or other violations of intellectual property rights. As competition in the industry increases, the possibility of intellectual property rights claims against Omnitek may grow. Omnitek’s technologies may not be able to withstand third-party claims or rights against their use. Intellectual property claims, whether having merit or otherwise, could be time consuming and expensive to litigate or settle and could divert management resources and attention. In addition, many of Omnitek’s agreements require that Omnitek indemnify for third-party intellectual property infringement claims, which could increase Omnitek’s costs as a result of defending such claims and may require that Omnitek pay the damages if there were an adverse ruling in any such claims. If litigation is successfully brought by a third party against Omnitek in respect of intellectual property, Omnitek may be required to cease distributing or marketing certain products or obtain licenses from the holders of the intellectual property at material cost, redesign affected products in such a way as to avoid infringing intellectual property rights, any or all of which could materially adversely affect our business, financial condition and results of operations. If those intellectual property rights are held by a competitor, Omnitek may be unable to obtain the intellectual property at any price, which could also adversely affect our competitive position. An adverse determination could also prevent Omnitek from offering its products. Any of these results could harm our business, financial condition and results of operations.

Page 18

The Company is subject to foreign business, political and economic disruption risks

Omnitek contracts with various entities from around the world. As a result, we are exposed to foreign business, political and economic risks, which could adversely affect our financial position and results of operations, including:

·difficulties in managing dealer relationships from outside of a dealer’s jurisdiction; 

·political and economic instability; 

·less developed infrastructures in newly industrializing countries; 

·susceptibility to business interruption in foreign areas due to war, terrorist attacks, medical epidemics, changes in political regimes, and general interest rate and currency instability; 

·exposure to possible litigation or claims in foreign jurisdictions; and, 

·competition from foreign-based providers and the existence of protectionist laws and business practices that favor such providers. 

Early stage of the Company and its products

Omnitek has generated limited revenue from operations and may not generate any significant or sufficient revenue from its current operations to continue future operations. To achieve profitable operations, Omnitek, alone or with others, must successfully initiate and maintain sales and distribution of our products. The time frame necessary to achieve market success for any individual product is uncertain. There can be no assurance that Omnitek’s efforts will be successful, that any of our products will prove to meet the anticipated levels of approval or effectiveness, or that we will be able to obtain and retain customers.

Omnitek’s results can also be affected by the ability of competition to introduce new products that have advantageous technology or the competition's ability to adjust its pricing to reduce our competitive advantage. Results will also be affected by strategic decisions made by the management regarding product volume, mix, and timing of orders received during operations. See Item 1 “Description of Business.”

Uncertainty of future sales

We require the commitment of substantial resources to advertisement, marketing and distribution of our products, however there can be no assurance that our products will meet the effectiveness required to be competitive in the marketplace and that our products achieve customer acceptance.

Future capital requirements; uncertainty of future funding

Substantial expenditures will be required to enable Omnitek to conduct existing product research, manufacturing, marketing and distribution of its products and Intellectual Property. Omnitek may need to raise additional capital to facilitate growth and support its long-term manufacturing, and marketing programs. Omnitek has no established bank-financing arrangements and until we have sufficient assets, capital, and inventory or accounts receivable, it is not anticipated that we will secure any bank financing in the near future. Therefore, it is likely that Omnitek may need to seek additional financing through subsequent future public or private sales of its securities, including equity securities. Omnitek may also seek funding for the manufacturing, and marketing of its products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable Omnitek, if at all. Any such additional financing may result in significant dilution to existing stockholders. If adequate funds are not available, we may be required to curtail one or more of our programs. Omnitek’s future cash requirements will be affected by the revenue generated from the sale of its products, the costs of production and marketing, as well as relationships with corporate partners, changes in the focus and direction of Omnitek’s programs, competitive and technological advances, and other factors.

Dependence on others; manufacturing capabilities and limited distribution capabilities

Page 19

An important element of Omnitek’s strategy for the marketing and release of its products is to enter into various arrangements with distribution and retail partners. The success and commercialization of Omnitek’s products will be dependent, in part, upon Omnitek’s ability to enter into such arrangements and upon the ability of these third parties to perform their responsibilities. Although we believe that parties to any such arrangements would have an economic motivation to succeed in performing their contractual responsibilities, the amount and timing of resources to be devoted to these activities may not be within our control. There can be no assurance that any such arrangements will be available on terms acceptable to Omnitek, if any at all, and that such parties will perform their obligations as expected, or that any revenue will be derived from such arrangements. If Omnitek is not able to enter into such arrangements, it could encounter delays in introducing its products into the market. See “Business.”

Omnitek plans to assemble certain products in-house after receiving components from outside vendors. Other products such as engines or components for future products may be produced or manufactured by outside companies for Omnitek. Therefore, Omnitek may be dependent on contract manufacturers for the production and manufacturing of certain products or components for products. In the event that we are unable to obtain or retain the necessary manufacturers for components or products on acceptable terms, we may not be able to continue to commercialize and market our products as planned. The manufacture of Omnitek’s products will be subject to current good manufacturing practices (“GMP”) requirements prescribed by Omnitek in order to meet the specifications and other standards prescribed by Omnitek to satisfy the anticipated and appropriate levels of operations and effectiveness when in use. There can be no assurance that we will be able to (i) obtain adequate supplies of products in a timely fashion at acceptable quality and prices, (ii) enter into arrangements for the manufacture of products with manufacturers whose facilities and procedures comply with Omnitek’s GMP or other regulatory requirements, should any such regulatory requirements arise, (iii) or that manufacturers will continue to comply with such standards, or (iv) that such manufacturers will be able to adequately meet Omnitek product needs. Omnitek’s dependence upon others for the manufacture of its proposed products may adversely affect our ability to develop and deliver products on a timely and competitive basis.

In addition, Omnitek does not now have, nor does it have current plans to acquire or obtain, the facilities, or personnel necessary to conduct its own full-scale distribution of its products. Consequently, Omnitek will have to rely on existing commercial distribution channels for the sale of its products. There can be no assurance that Omnitek will be able to secure sufficient distribution of any of its products on acceptable terms.

Approximately seven customers accounted for 74% of revenue for the year ended December 31, 2019, and loss of any of these customers could adversely affect our results of operations, financial condition, and profitability

These customers are free to purchase from other suppliers who may have more established distribution channels and other competitive advantages, such as price. In addition, our customers’ need for our products depends on many factors including the worldwide and regional fuel prices, and various governmental regulations. If any of the latter factors change significantly, our customers’ demand for our products might decline substantially.

The loss of any of these customers could have a materially adverse effect on our results of operations and financial condition. At the minimum, it would have a materially adverse effect on our operations during the short-term until we are able to generate replacement customers. For more information about dependence on a few major customers, please see Item 1. Description of Business - “Dependence on One or Few Major Customers.”

Dependence on a limited number of qualified suppliers of components and equipment could lead to delays, lost revenue or increased costs.

Our future operating results may depend substantially on our suppliers’ ability to supply us with components in sufficient volumes to meet our production requirements. Some components that we use are available from only a single or limited number of qualified suppliers. If there is a significant simultaneous upswing in demand for such a component from several high volume industries resulting in a supply reduction, if a component is otherwise in short supply, or if a supplier has a quality issue with a component, we may experience delays or increased costs in obtaining that component. If we are unable to obtain sufficient quantities used in the components, or other necessary components, we may experience production delays which could cause us loss of revenue. If a component becomes unavailable, we could suffer significant loss of revenue.

Page 20

Each of the following could also significantly harm our operating results:

·an unwillingness of a supplier to supply such components to us; 

·consolidation of key suppliers; 

·failure of a key supplier to provide enough components; 

·a key supplier’s, or sub-supplier’s, inability to access credit necessary to operate its business; or 

·failure of a key supplier to remain in business. 

Risk of technological obsolescence and competition

Omnitek operates in an ever-evolving field. Developments are expected to continue at a rapid pace in the industry in general. Competition from other large companies, joint ventures, research and academic institutions and others is intense and expected to increase. Many of these companies and institutions have substantially greater capital resources, research and development staffs and facilities than Omnitek, and many have substantially greater experience in conducting testing, manufacturing and marketing of products. These entities represent significant long-term competition for Omnitek. There can be no assurance that developments by others will not render our technologies and future products obsolete or noncompetitive. In addition, Omnitek’s competitors might succeed in developing or purchasing technologies and products that are more effective than those that are being developed by the Company or that would render the Company's technology and products obsolete or noncompetitive. See “Business – Competition.”

Dependence upon key personnel

Our success in developing marketable products and achieving a competitive position will depend, in part, on its ability to retain qualified engineers, management and marketing personnel and in particular, to retain the services of Mr. Werner Funk, upon whom we are reliant on for the development of products for the Company.

In the event of the death, incapacity or departure of Mr. Funk from Omnitek, it is unlikely that we would be able to continue conducting our business plan in a timely manner. Even if we are able to find additional personnel to replace Mr. Funk it is uncertain whether we could find someone who could develop our business along the lines described in this report. We will fail without Mr. Funk or an appropriate replacement. We have acquired “key–man” life insurance on the life of Mr. Funk naming Omnitek as the beneficiary however there is no guarantee that this policy would be adequate to allow us to continue to operate in the event Mr. Funk should be unable to continue in his current position due to death, incapacity or some other unforeseen event.

Omnitek has an Employment Agreement in place with Mr. Funk that provides for continued service in his current capacities through January of 2021 and thereafter on a year-to-year basis. See “Narrative Disclosure to Summary Compensation Table” for details of Employment Agreements.

Changes of prices for products

While the prices of our products are projected to be in line with those from market competitors, there can be no assurance that they will not decrease in the future. Competition may cause us to lower prices in the future. Moreover, it is difficult to raise prices even if internal costs increase.

Creditworthiness of distributors is an ongoing concern

 Omnitek may not always be able to collect all of the funds owed to it by its distributors. Some distributors may experience financial difficulties which may adversely impact our collection of accounts receivable. We regularly review the collectability and creditworthiness of our distributors to determine an appropriate allowance for credit to such distributors. If our uncollectible accounts exceed that amount for which we have planned, this would adversely impact our operating results. Omnitek tries to minimize this concern by selling most of its products by way of prepaid purchase orders. 

C Corporation tax status

Page 21

Omnitek is a C Corporation under the Internal Revenue Code of 1986. All items of income and loss are taxed first at the corporate level and any dividends distributed to shareholders are taxed at the shareholder level as well.

Limited current sales and marketing capability

Though Omnitek has key personnel with experience in sales, marketing and distribution to market its products, we must either retain and hire the necessary personnel to distribute and market its products or enter into collaborative arrangements or distribution agreements with third parties who will market such products or develop their own marketing and sales force with technical expertise and supporting distribution capability. There can be no assurance that we will be able to retain or hire the personnel with sufficient experience and knowledge to distribute and market its products or be able to enter into collaborative or distribution arrangements or develop its own sales force, or that such sales and marketing efforts, including the efforts of the companies with which Omnitek has entered into collaborative agreements, will be successful.

Trading and limited market

At the present time, Omnitek common stock is traded on the OTCQB under the symbol OMTK. There is currently a limited public market for the Common Stock and there can be no assurance that an active trading market will develop or, if one does develop, that it will be maintained. However, should such a market arise, the possibility or actual sale into the market of shares, as permitted under Rule 144 of the Securities Act of 1933, may adversely affect prevailing market prices, if any, for Omnitek’s Common Stock and could impair our ability to raise capital through the sale of its equity securities. In order to qualify for unrestricted resale of Common Stock under Rule 144, certain holding periods must be met and a legal opinion setting forth the exemption from registration must be provided. Further, there is no assurance that Rule 144 will be applicable to Omnitek and investors may not be able to rely on its provisions now or in the future. In addition, sales of significant amounts of Common Stock by Omnitek could have an adverse effect on the market price.

No dividends

No cash dividends have been paid. Payment of dividends on the Common Stock is within the discretion of the Board of Directors, is subject to state law, and will depend upon our earnings, if any, its capital requirements, financial condition and other relevant factors.

Possible volatility of stock price

The market price of our securities is likely to be highly volatile. Factors such as the market acceptance of Omnitek’s products, success of distribution channels or its competitors, announcements of technological innovations or new commercial products by us or our competitors, developments in trademark, patent or other proprietary rights of Omnitek or our competitors, and fluctuations in our operating results may have a significant effect on the market price of the Common Stock. In addition, the stock market has experienced and continues to experience extreme price and volume fluctuations which have affected the market price of many companies and which have often been unrelated to the operating performance of these companies. These broad market fluctuations, as well as general economic and political conditions, may adversely affect the market price, if a market develops, of the Common Stock. See “Description of Capital Stock.”

We are subject to the periodic reporting requirements of the Securities Exchange Act of 1934, which require us to incur audit fees and legal fees in connection with the preparation of such reports. These additional costs could reduce our ability to earn a profit.

We are required to file periodic reports with the Securities and Exchange Commission pursuant to the Securities Exchange Act of 1934 and the rules and regulations promulgated thereunder. In order to comply with these requirements, our independent registered public accounting firm has to review our financial statements on a quarterly basis and audit our financial statements on an annual basis. Moreover, our legal counsel will have to review and assist in the preparation of such reports. The costs charged by these professionals for such services cannot be accurately predicted at this time because factors such as the number and type of transactions that we

Page 22

engage in and the complexity of our reports cannot be determined at this time and will have a major effect on the amount of time to be spent by our auditors and attorneys. However, the incurrence of such costs will obviously be an expense to our operations and thus have a negative effect on our ability to meet our overhead requirements and earn a profit. We may be exposed to potential risks resulting from requirements under Section 404 of the Sarbanes-Oxley Act of 2002. If we cannot provide reliable financial reports or prevent fraud, our business and operating results could be harmed, investors could lose confidence in our reported financial information, and the trading price of our common stock could drop significantly.

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, as amended by SEC Release 33-8889 we are required to include in our annual report our assessment of the effectiveness of our internal control over financial reporting as of the end of the year. If we fail to achieve and maintain the adequacy of our internal controls, as such standards are modified, supplemented or amended from time to time, we may not be able to ensure that we can conclude on an ongoing basis that we have effective internal controls over financial reporting in accordance with Section 404 of the Sarbanes-Oxley Act. Moreover, effective internal controls, particularly those related to revenue recognition, are necessary for us to produce reliable financial reports and are important to help prevent financial fraud. If we cannot provide reliable financial reports or prevent fraud, our business and operating results could be harmed, investors could lose confidence in our reported financial information, and the trading price of our common stock could drop significantly.

Management believes that these reporting obligations will increase Omnitek’s annual legal and accounting costs by an estimated $37,000 and $36,000, for the last two fiscal years, 2019 and 2018, respectively.

Penny stock regulations

If Omnitek’s stock is below $5.00 per share, or we do not have $2,000,000 in net tangible assets, or are not listed on an exchange or on the NASDAQ National Market System, among other conditions, our shares may be subject to a rule promulgated by the Securities and Exchange Commission (the “SEC”) that imposes additional sales practice requirements on broker-dealers who sell such securities to persons other than established customers and institutional accredited investors. For transactions covered by the rule, the broker-dealer must make a special suitability determination for the purchaser and receive the purchaser's written consent to the transaction prior to the sale. Furthermore, if the price of Omnitek’s stock is below $5.00, and does not meet the conditions set forth above, sales of our stock in the secondary market will be subject to certain additional new rules promulgated by the SEC. These rules generally require, among other things, that brokers engaged in secondary trading of stock provide customers with written disclosure documents, monthly statements of the market value of penny stocks, disclosure of the bid and asked prices, and disclosure of the compensation to the broker-dealer and disclosure of the sales person working for the broker-dealer. These rules and regulations may affect the ability of broker-dealers to sell Omnitek's securities, thereby limiting the liquidity of the securities. They may also affect the ability of shareholders to resell their securities in the secondary market.

The Company owns no real property. Effective September 1, 2019, the Company entered into the Fourth Amendment to the Lease for its principal executive offices and related engineering and assembly facilities located in approximately 21,786 square feet of space at 1333 Keystone Way, Suite 101, Vista, California 92081, and extending the lease term to August 31, 2020, at which time a new lease extension has to be negotiated.  During the year ended December 31, 2019, lease payments were $212,641.  For the fiscal year ended December 31, 2018, lease payments were $226,789. Our existing space should be adequate for our needs for the foreseeable future.

The current lease payment is $14,161 per month, plus common area maintenance expenses (CAM). Under the amended lease, past due rent is payable at monthly installments of $10,000, until such time as the past due rent has been paid in full. As of December 31, 2019 the outstanding balance was $62,529.

ITEM 3. LEGAL PROCEEDINGS 

Page 23

We are not a party to any pending legal proceeding. No federal, state or local governmental agency is presently contemplating any proceeding against the Company. No director, executive officer or affiliate of the Company or owner of record or beneficially of more than five percent of the Company's common stock is a party adverse to the Company or has a material interest adverse to the Company in any proceeding.

PART II.

Market Information

Our common stock is traded on OTCQB under the symbol “OMTK.” The CUSIP number for the Issuer’s common stock is 68215W 10 7. The following table sets forth, in U.S. dollars the high and low sale prices for each of the calendar quarters indicated, as reported by the OTCQB. The prices in the table may not represent actual transactions and do not include retail markups, markdowns or commissions.

There is currently a limited public market for the Common Stock and there can be no assurance that an active trading market will develop or, if one does develop, that it will be maintained. However, should such a market arise, the possibility or actual sale into the market of shares of the Company's Common Stock as permitted under Rule 144 of the Securities Act of 1933 may adversely affect prevailing market prices, if any, for the Company's Common Stock and could impair the Company's ability to raise capital through the sale of its equity securities. In order to qualify for unrestricted resale of Common Stock under Rule 144, certain holding periods must be met and a legal opinion setting forth the exemption from registration must be provided. Further, there is no assurance that Rule 144 will be applicable to the Company and investors may not be able to rely on its provisions now or in the future. In addition, sales of significant amounts of Common Stock by the Company subsequent to this offering could have an adverse effect on the market price, if any, for the Company's securities.

The market price of Omnitek’s common stock will likely fluctuate significantly in response to the following factors, some of which are beyond the Company’s control: variations in its quarterly operating results; changes in financial estimates of its revenues and operating results by securities analysts; changes in market valuations of similar companies; announcements by us of significant contracts, acquisitions, strategic partnerships, joint ventures or capital commitments; additions or departures of key personnel; future sales of its common stock; stock market price and volume fluctuations attributable to inconsistent trading volume levels of its stock; commencement of, or involvement in, litigation.

On March 26, 2020, the last bid and ask of our common stock as reported on the OTCQB was $.05 and $.059, respectively. 

Holders

Page 24

There were approximately 44 stockholders of record as of December 31, 2019.  We believe there are in excess of 2,500 additional stockholders whose shares of our common stock are held on their behalf by brokerage firms or other agents.

Dividends

Common Stock - No dividends have ever been paid on the Common Stock and the Company does not currently anticipate paying any cash or other dividends on the Common Stock. Future dividend policy will be determined by the Board of Directors of the Company in light of prevailing financial need and earnings, if any, of the Company and other relevant factors.

Preferred Stock - Under our articles of incorporation, our Board of Directors is authorized, without stockholder action, to issue preferred stock in one or more series and to fix the number of shares and rights, preferences, and limitations of each series. Among the specific matters that may be determined by the Board of Directors are the dividend rate, the redemption price, if any, conversion rights, if any, the amount payable in the event of any voluntary liquidation or dissolution of our company, and voting rights, if any. As of the date of this report, no shares of preferred stock were issued and outstanding.

Payment of dividends on the Common Stock and Preferred Stock is within the discretion of the Board of Directors, is subject to state law, and will depend upon the Company's earnings, if any, its capital requirements, financial condition and other relevant factors.

Securities Authorized for Issuance Under Equity Compensation Plans

The following table sets forth information as of December 31, 2019 with respect to our equity compensation plans previously approved by stockholders and equity compensation plans not previously approved by stockholders.

⁽¹⁾Of these shares, 750,000 are subject to options outstanding under the 2017 Plan, 2,065,556 are subject to options outstanding under the 2015 Plan and 125,000 are subject to options outstanding under the 2011 Plan.  

⁽²⁾Represents 4,250,000 shares available for issuance under the 2017 Plan, 334,444 shares available for issuance under the 2015 Plan and 45,000 shares available for issuance under the 2011 Plan. No new awards will be granted under the 2011Plan.  Shares available under the 2015 Plan may be used for any type of award authorized in that plan, including stock options, stock appreciation rights, and full-value awards.  

On August 3, 2011, the Board of Directors adopted the Omnitek Engineering Corp. 2011 Long-term Incentive Plan (the “2011 Plan”), under which 1,000,000 shares of Company’s Common Stock were reserved for

Page 25

issuance by the company to attract and retain employees and directors of the Company and to provide such persons with incentives and awards for superior performance and providing services to the Company.  The 2011 Plan is administered by a committee comprised of the Board of Directors of the Company or appointed by the Board of Directors, which has broad flexibility in designing stock-based incentives. The Board of Directors determines the number of shares granted and the option exercise price, pursuant to the terms of the Plan.

On September 11, 2015, the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long-term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of Company’s Common Stock were reserved for issuance by the company to attract and retain employees and directors of the Company and to provide such persons with incentives and awards for superior performance and providing services to the Company.    The 2015 Plan is administered by a committee comprised of the Board of Directors of the Company or appointed by the Board of Directors, which has broad flexibility in designing stock-based incentives. The Board of Directors determines the number of shares granted and the option exercise price, pursuant to the terms of the Plan.

On June 30, 2017, the Board of Directors adopted the Omnitek Engineering Corp. 2017 Long-term Incentive Plan (the “2017 Plan”), under which 5,000,000 shares of Company’s Common Stock were reserved for issuance by the company to attract and retain employees and directors of the Company and to provide such persons with incentives and awards for superior performance and providing services to the Company.    The 2017 Plan was approved by the shareholders on October 27, 2017. The 2017 Plan is administered by a committee comprised of the Board of Directors of the Company or appointed by the Board of Directors, which has broad flexibility in designing stock-based incentives. The Board of Directors determines the number of shares granted and the option exercise price, pursuant to the terms of the Plan.

Issuer Purchases of Equity Securities

There were no stock repurchases during the year ended December 31, 2019.

Recent Sales of Unregistered Securities

See Item 9B., below regarding the sale of unregistered Securities on January 7, 2020, subsequent to the period covered by this report.

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

The following discussion of our financial condition and results of operations should be read in conjunction with the financial statements and related notes to the financial statements included elsewhere in this periodic report.  Some of the statements under “Management’s Discussion and Analysis,” “Description of Business” and elsewhere herein may include forward-looking statements which reflect our current views with respect to future events and financial performance. These statements include forward-looking statements both with respect to us specifically and the alternative fuels engines industry in general. Statements which include the words “expect,” “intend,” “plan,” “believe,” “project,” “anticipate,” “will,” and similar statements of a future or forward-looking nature identify forward-looking statements for purposes of the federal securities laws or otherwise. The safe harbor provisions of the federal securities laws do not apply to any forward-looking statements contained in this registration statement.

All forward-looking statements address such matters that involve risks and uncertainties. Accordingly, there are or will be important factors that could cause our actual results to differ materially from those indicated in these statements. We undertake no obligation to publicly update or review any forward-looking statements, whether as a result of new information, future developments or otherwise.

Page 26

If one or more of these or other risks or uncertainties materialize, or if our underlying assumptions prove to be incorrect, actual results may vary materially from what we projected. Any forward-looking statements you read herein reflect our current views with respect to future events and are subject to these and other risks, uncertainties and assumptions relating to our written and oral forward-looking statements attributable to us or individuals acting on our behalf and such statements are expressly qualified in their entirety by this paragraph.

Results of Operations

For the years ended December 31, 2019 and 2018

Revenues were $964,409 for 2019 compared with $1,285,686 in 2018, a decrease of $321,277, or 25%. The decrease in revenues is primarily attributable to reduced sales of filters.

Our total cost of goods sold increased to $796,947 in 2019 from $784,893 in 2018, an increase of $12,054. For both 2019 and 2018 our total cost of goods sold consisted of two line items: cost of goods sold on revenues and a non-cash inventory reserve adjustment. Our cost of goods sold on revenues decreased to $554,101 in 2019 (resulting in adjusted gross margin of 43%) from $687,457 in 2018 (resulting in adjusted gross margin of 47%), a decrease of $133,356. Our non-cash inventory reserve adjustment increased to $242,846 in 2019 from $97,436 in 2018, an increase of $145,410. The decrease in the adjusted gross margin between 2019 and 2018 is attributable to product mix.

Our operating expenses for 2019 were $867,089 compared with $925,945 in 2018, a decrease of $58,856, or 6%.  General and administrative expense for 2019 was $759,606 compared with $811,459 in 2018.  The decrease is due primarily to salaries and wages of $262,822 in 2019 compared with $286,644 in 2018. Major components of general and administrative expenses in 2019 were insurance expense of $123,102, rent expense of $145,109 and salary and wages of $262,822. This compares with insurance expense of $135,202, rent expense of $130,839, and salary and wages of $286,644 during 2018. Research and development outlays were $106,916 in 2019 compared with $106,896 in 2018.

Our net loss in 2019 was $720,422, or $(0.04) per share, compared with a net loss of $486,406, or $(0.02) per share, in 2018. The increased loss was primarily the result of a decrease in revenues combined with an increase in the inventory reserve adjustment in 2019. Additionally, operating loss for the twelve months ended December 31, 2019 was $699,627 compared with $425,152 for the twelve months ended December 31, 2018.  The increased operating loss was primarily the result of a decrease in revenues combined with an increase in the inventory reserve adjustment in 2019.

Results for the twelve months ended December 31, 2019 reflect non-cash expenses, including the value of options and warrants granted in the amount of $49,786, depreciation and amortization of $567 and the inventory reserve adjustment of $242,846. For the twelve months ended December 31, 2018, non-cash expenses included the value of options and warrants granted of $37,730, depreciation and amortization of $7,590, the inventory reserve adjustment of $97,436 and loss on settlement of debt of $32,963.

Liquidity and Capital Resources

Overview

Our primary sources of liquidity are cash provided by financing activities and available working capital.  Additionally, from time to time we may raise funds from the equity capital markets to fund our research and development programs, expansion of our business and general operations.

At December 31, 2019, our current liabilities totaled $1,530,608 and our current assets totaled $1,082,497, resulting in negative working capital of $448,111.  

We have no firm commitments or obligations for capital expenditures. Substantial discretionary expenditures may be required to enable us to conduct product research, development, manufacturing, marketing and distribution activities. We may need to raise additional capital to facilitate growth and support our long-term product

Page 27

development, manufacturing, and marketing programs. The Company has no established bank-financing arrangements and it is not anticipated that we will secure any bank financing in the near future. Therefore, it is likely that we may need to seek additional financing through subsequent future public or private sales of our securities, including equity securities. We may also seek funding for the development, manufacturing, and marketing of our products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable to us, if at all. If adequate funds are not available, we may be required to curtail one or more of our research and development programs.

We have historically incurred significant losses, which have resulted in a total accumulated deficit of $20,975,929 at December 31, 2019, of which $5,604,135 is a direct result of derivative expense and change in fair value of derivative liability and is unrelated to, and has had no effect on, our operations or cash flow. The derivative expense and change in fair value of derivative liability was a one-time charge reflected on the Form 10-K for the year ended December 31, 2013.

Operating Activities

We realized negative cash flow from operations of $83,824 for the year ended December 31, 2019 compared with negative cash flow of $103,505 during the year ended December 31, 2018.

Included in the net loss of $720,422 for the twelve months ended December 31, 2019 are non-cash expenses, which are not a drain on our capital resources. During 2019, these non-cash expenses include the value of options and warrants granted in the amount of $49,786, depreciation and amortization of $567 and the inventory reserve adjustment of $242,846.  

Off-Balance Sheet Arrangements

None.

Critical Accounting Policies and Estimates

Accounting Method and Use of Estimates

Omnitek’s financial statements are prepared using the accrual method of accounting. The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Areas where significant estimates are required include the following:

Accounts Receivable

Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts. Trade receivables are written off when deemed uncollectible. Recoveries of trade receivables previously written off are recorded when received.

Inventories

Inventories are stated at the lower of cost or market, cost determined on an average cost basis. Market value for raw materials is based on replacement costs. Inventory costs include material, labor and manufacturing overhead.  The Company reviews inventories on hand at least annually and records provisions for estimated excess, slow moving and obsolete inventory, as well as inventory with a carrying value in excess of net realizable value. The regular and systematic inventory valuation reviews include a current assessment of future product demand, historical experience and product expiration.

Page 28

Long-lived assets

Omnitek assesses the recoverability of its long-lived assets annually and whether circumstances would indicate that there may be an impairment. Omnitek compares the estimated undiscounted future cash flows to the carrying value of the long-lived assets to determine if an impairment has occurred.  In the event that an impairment has occurred, Omnitek recognizes the impairment immediately.

Property and Equipment

Property and equipment are recorded at cost.  Depreciation and amortization are calculated on the straight-line method over the shorter of the lease term or the estimated useful lives of the assets ranging from three to five years.

Contract assets and liabilities

The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones. Generally, billing occurs subsequent to revenue recognition, resulting in contract assets. However, Omnitek sometimes receives advances or deposits from its customers, before revenue is recognized, resulting in billings in excess of costs and estimated earnings on uncompleted contracts (contract liabilities). 

Income Taxes

Omnitek accounts for income taxes in accordance with Accounting Standards Codification Topic 740, which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns.  A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized.  Omnitek uses historical experience to determine the likelihood of realization of deferred tax liabilities and assets.

Revenue Recognition

In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account for revenue recognition.

We recognize revenue on various products and services as follows:

Products - The Company recognizes revenue from the sale of products (e.g., filters and engine components) as performance obligations are satisfied. This type of revenue is primarily generated from the sale of finished product to customers. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risks and rewards transfer (i.e., the performance obligation has been satisfied).

Contracts – Revenues are recognized as performance obligations are satisfied over time (also known as percentage-of-completion method), measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, estimated profitability and associated change

Page 29

orders and claims, including those changes arising from contract penalty provisions and final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined.  

Performance Obligations

A performance obligation is a promise in a contract to transfer a distinct good or service to a customer and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.

Performance Obligations Satisfied Over Time

Revenues for Omnitek’s long-term contracts that satisfy the criteria for over time recognition (formerly known as percentage-of-completion method) is recognized as the work progresses. The majority of the revenue is derived from long-term engine development agreements that typically span between 12 to 24 months. Omnitek’s long-term contracts will continue to be recognized over time because our typical contract is for a customized asset with no alternative use and generally the Company has a right to payment for work completed to date. Under the new revenue standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as the Company incurs costs. Contract costs include labor and material. Revenue from products and services transferred to customers over time accounted for 5% and 1% of revenue for the years ended December 31,2019 and 2018, respectively.

Performance Obligations Satisfied at a Point in Time

Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 95% and 99% of revenue for the years ended December 31, 2019 and 2018, respectively.

Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.

Pre-contract costs are generally not incurred by the Company.

Contract Estimates

Accounting for long-term contracts involves the use of various techniques to estimate total contract revenue and costs. For long-term contracts, Omnitek estimates the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognizes that profit over the life of the contract.  

Variable Consideration 

The transaction price for contracts may include variable consideration, which includes increases to transaction price for approved and unapproved change orders, claims and incentives, and reductions to transaction price for liquidated damages. Variable consideration historically has been insignificant.  

Recently Adopted Accounting Pronouncements

In February 2016, the FASB issued its new lease accounting guidance in ASU 2016-2, Leases (Topic 842). Under the new guidance, lessees will be required to recognize for all leases (with the exception of short-term leases) a lease liability, which is a lessee’s obligation to make lease payments arising from a lease, measured on a discounted basis, and a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term. The standard is effective for the interim and annual reporting periods

Page 30

beginning after December 15, 2018. ASU 2016-2 allows companies to adopt the new standard by either applying a modified retrospective method to the beginning of the earliest period presented in the financial statements or an optional transition method to initially apply the standard on January 1, 2019 and recognize a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. The Company adopted the standard using the optional transition method and will apply the new guidance prospectively to leases that exist and those entered into on or after January 1, 2019 without adjusting comparative periods in the financial statements.

In June 2018, the FASB issued ASU 2018-07, Compensation – Stock Compensation (Topic 718): Improvements to Nonemployees Share-Based Payment Accounting (“ASU 2018-07”). ASU 2018-07 expands the scope of Topic 718 (which currently only includes share-based payments to employees) to include share-based payments issued to nonemployees for goods or services. With the adoption of ASU 2018-07, the accounting for share-based payments to nonemployees and employees will be substantially the same. ASU 2018-07 is effective for public companies for annual and interim periods beginning after December 15, 2018, with early adoption permitted. Management has assessed the impact that ASU 2018-07 will have on the Company and determined that it will not have a material impact on the Company’s financial statements and related disclosures.

Recently Issued Accounting Pronouncements

The Company has evaluated recent accounting pronouncements and their adoption has not had or is expected to have a material impact on the Company’s financial position, or statements

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

Page 31

OMNITEK ENGINEERING CORP.

FINANCIAL STATEMENTS

December 31, 2019 and 2018

C O N T E N T S

Page 32

To the Board of Directors and Shareholders of Omnitek Engineering Corp.:

Opinion on the Financial Statements

Explanatory Paragraph Regarding Going Concern

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 2 to the financial statements, the Company has suffered recurring losses from operations, negative cash flows from operations and has a net capital deficiency which raises substantial doubt about its ability to continue as a going concern. Management's plans in regard to these matters are also described in Note 2. The financial statements do not include any adjustments that might result from the outcome of this uncertainty.

Basis for Opinion

These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on the Company’s financial statements based on our audits.  We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks.  Such procedures included examining on a test basis, evidence regarding the amounts and disclosures in the financial statements.  Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements.  We believe that our audits provide a reasonable basis for our opinion.  

/s/ Sadler, Gibb & Associates, LLC

We have served as the Company’s auditor since 2010.

Salt Lake City, UT

April 23, 2020  

Page 33

OMNITEK ENGINEERING CORP.

Page 34

OMNITEK ENGINEERING CORP.

Page 35

OMNITEK ENGINEERING CORP.

Page 36

OMNITEK ENGINEERING CORP.

Page 37

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 1 – ORGANIZATION AND BUSINESS ACTIVITY

Omnitek Engineering, Corp. (“Omnitek” or “the Company”) was incorporated on October 9, 2001 under the laws of the State of California. Omnitek develops and sells a proprietary technology to convert diesel engines to an alternative fuel, new natural gas engines, and complementary products. Omnitek products are available for stationary applications and the global transportation markets, which includes light commercial vehicles, minibuses, heavy-duty trucks, municipal buses, as well as rail and marine applications. The technology can be applied for compressed natural gas (“CNG”), liquefied natural gas (“LNG”), or renewable natural gas (“Biogas” or “RNG”), as well as liquid petroleum gas (“Propane” or “LPG”). Omnitek began operations on October 10, 2001, and was a spin-off from Nology Engineering, Inc.

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

a.       Accounting Methods

The Company's financial statements are prepared using the accrual method of accounting.  The Company has elected a December 31, year-end.

b.       Use of Estimates in Preparing Financial Statements

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates. The Company also regularly evaluates estimates and assumptions related to deferred income tax asset valuation allowances, inventory valuation allowances, allowance for doubtful receivables and valuations of equity-based payments.

c.       Cash and Cash Equivalents

For purposes of the statements of cash flows, the Company considers all highly liquid debt instruments purchased with a maturity of three months or less to be cash equivalents.

d.       Accounts Receivable

Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis.  Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts.  Trade receivables are written off when deemed uncollectible.  Recoveries of trade receivables previously written off are recorded when received.   Allowance for doubtful accounts for the years ended December 31, 2019 and 2018 was $15,000 and $15,000, respectively. Additionally, bad debt expense for the years ended December 31, 2019 and 2018 was $-0- and $-0-, respectively.

e.       Inventories

Inventories are stated at the lower of cost or market, cost determined on an average cost basis.  Market value for raw materials is based on replacement costs. Inventory costs include material, labor and manufacturing overhead.  The Company reviews inventories on hand at least annually and records provisions for estimated excess, slow moving and obsolete inventory, as well as inventory with a carrying value in excess of net realizable value. The regular and systematic inventory valuation reviews include a current assessment of future product demand, historical experience and product expiration.

Page 38

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

f.       Long-Lived Assets

The Company assesses the recoverability of its long-lived assets annually and whenever circumstances would indicate that there may be an impairment.  The Company compares the estimated undiscounted future cash flows to the carrying value of the long-lived assets to determine if an impairment has occurred.  In the event that an impairment has occurred, the Company will recognize the impairment immediately. No impairment expense was

recognized as of December 31, 2019 or 2018.

g.       Property and Equipment

Property and equipment are recorded at cost.  Depreciation and amortization are calculated on the straight-line method over the shorter of the lease term or the estimated useful lives of the assets ranging from three to five years.

h.        Revenue Recognition

In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account for revenue recognition.

We recognize revenue on various products and services as follows:

Products - The Company recognizes revenue from the sale of products (e.g., filters and engine components) as performance obligations are satisfied. This type of revenue is primarily generated from the sale of finished product to customers. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risks and rewards transfer (i.e., the performance obligation has been satisfied).

Contracts – Revenues are recognized as performance obligations are satisfied over time (also known as percentage-of-completion method), measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, estimated profitability and associated change orders and claims, including those changes arising from contract penalty provisions and final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined.

Performance Obligations

A performance obligation is a promise in a contract to transfer a distinct good or service to a customer and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.

Performance Obligations Satisfied Over Time

Revenues for Omnitek’s long-term contracts that satisfy the criteria for over time recognition (formerly known as percentage-of-completion method) is recognized as the work progresses. The majority of the revenue is derived from long-term engine development agreements that typically span between 12 to 24 months. Omnitek’s long-term contracts will continue to be recognized over time because our typical contract is for a customized asset

Page 39

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

with no alternative use and generally the Company has a right to payment for work completed to date. Under the new revenue standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as the Company incurs costs. Contract costs include labor and material. Revenue from products and services transferred to customers over time accounted for 5% and 1% of revenue for the years ended December 31,2019 and 2018, respectively.

Performance Obligations Satisfied at a Point in Time

Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 95% and 99% of revenue for the years ended December 31, 2019 and 2018, respectively.

Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.

Pre-contract costs are generally not incurred by the Company.

Contract Estimates

Accounting for long-term contracts involves the use of various techniques to estimate total contract revenue and costs. For long-term contracts, Omnitek estimates the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognizes that profit over the life of the contract.  

Variable Consideration 

The transaction price for contracts may include variable consideration, which includes increases to transaction price for approved and unapproved change orders, claims and incentives, and reductions to transaction price for liquidated damages. Variable consideration historically has been insignificant.  

Page 40

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

Disaggregation of Revenue

The following table presents Omnitek’s revenues disaggregated by region and product type: 

i.       Cost of Goods Sold

The Company includes product costs (i.e. material, direct labor and overhead costs), shipping and handling expense, production-related depreciation expense and product license agreement expense in cost of goods sold.

j.       Research and Development

The Company expenses the costs of researching and developing its products during the period incurred. During the years ended December 31, 2019 and 2018, the Company incurred research and development expenses of $106,916 and $106,896, respectively.

k.       Advertising

The Company follows the policy of charging the costs of advertising to expense as incurred. During the years ended December 31, 2019 and 2018, the Company expensed $-0- and $-0-, respectively.

l.       Provision for Income Taxes

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized. Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.

Page 41

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (continued)

The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of December 31, 2019, the Company had no accrued interest or penalties related to uncertain tax positions. The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2012.

m.       Basic and Diluted Loss Per Share

The computation of basic earnings per share of common stock is based on the weighted average number of shares outstanding during the periods presented. The computation of fully diluted earnings per share includes common stock equivalents outstanding at the balance sheet date. The Company had 2,672,223 and 2,556,390 stock options and warrants that would have been included in the fully diluted earnings per share as of December 31, 2019 and 2018, respectively. However, the common stock equivalents were not included in the loss per share computation because they are anti-dilutive.  

n.       Fair Value Measurements

The fair value of a financial instrument is the amount that could be received upon the sale of an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. Financial assets are marked to bid prices and financial liabilities are marked to offer prices. Fair value measurements do not include transaction costs. A fair value hierarchy is used to prioritize the quality and reliability of the information used to determine fair values. Categorization within the fair value hierarchy is based on the lowest level of input that is significant to the fair value measurement. The fair value hierarchy is defined into the following three categories:

Level 1 – Quoted prices in active markets for identical assets or liabilities;

Level 2 – Inputs other than quoted prices included within Level 1 that are either directly or indirectly observable; and

Level 3 – Unobservable inputs that are supported by little or no market activity, therefore requiring an entity to develop its own assumptions about the assumptions that market participants would use in pricing.

o.       Stock-based Compensation

The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value.  The Company estimates the fair

value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock.

p.       Concentration of Risks

Customers

During the year ended December 31, 2019, seven customers accounted for approximately 74% of sales.

During the year ended December 31, 2018, seven customers accounted for approximately 73% of sales.

Page 42

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

Suppliers

During the year ended December 31, 2019, five suppliers accounted for 86 % of products purchased.

During the year ended December 31, 2018, four suppliers accounted for 82% of products purchased.

q.       Liquidity and Going Concern

Historically, the Company has incurred net losses and negative cash flows from operations.  As of December 31, 2019, the Company had an accumulated deficit of $20,975,929 and total stockholders’ deficit of ($430,877).  At December 31, 2019, the Company had current assets of $1,082,497 including cash of $20,236, and current liabilities of $1,530,608, resulting in negative working capital of $448,111. For 2019, the Company reported a net loss of $720,422 and net cash used by operating activities of $83,824. Management believes that based on its operating plan, the projected sales for 2020, combined with funds available from its working capital will be sufficient to fund operations for the next twelve months from the date these financial statements were issued.  However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. Whether, and when, the Company can attain profitability and positive cash flows from operations is uncertain. The Company is also uncertain whether it can raise additional capital. These uncertainties cast significant doubt upon the Company’s ability to continue as a going concern. Our financial statements have been prepared on a going concern basis, which assumes the realization of assets and liquidation of liabilities in the normal course of operations. The financial statements do not include any adjustments relating to the recoverability or classification of recorded asset amounts or the amounts or classification of liabilities should we be unable to continue as a going concern.     

r.       Recently Adopted Accounting Pronouncements

In February 2016, the FASB issued its new lease accounting guidance in ASU 2016-2, Leases (Topic 842). Under the new guidance, lessees will be required to recognize for all leases (with the exception of short-term leases) a lease liability, which is a lessee’s obligation to make lease payments arising from a lease, measured on a discounted basis, and a right-of-use asset, which is an asset that represents the lessee’s right to use, or control the use of, a specified asset for the lease term. The standard is effective for the interim and annual reporting periods beginning after December 15, 2018. ASU 2016-2 allows companies to adopt the new standard by either applying a modified retrospective method to the beginning of the earliest period presented in the financial statements or an optional transition method to initially apply the standard on January 1, 2019 and recognize a cumulative-effect adjustment to the opening balance of retained earnings in the period of adoption. The Company adopted the standard using the optional transition method and will apply the new guidance prospectively to leases that exist and those entered into on or after January 1, 2019 without adjusting comparative periods in the financial statements.

In June 2018, the FASB issued ASU 2018-07, Compensation – Stock Compensation (Topic 718): Improvements to Nonemployees Share-Based Payment Accounting (“ASU 2018-07”). ASU 2018-07 expands the scope of Topic 718 (which currently only includes share-based payments to employees) to include share-based payments issued to nonemployees for goods or services. With the adoption of ASU 2018-07, the accounting for share-based payments to nonemployees and employees will be substantially the same. ASU 2018-07 is effective for public companies for annual and interim periods beginning after December 15, 2018, with early adoption permitted. Management has

assessed the impact that ASU 2018-07 will have on the Company and determined that it will not have a material impact on the Company’s financial statements and related disclosures.

Page 43

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 2 – SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

       Recently Issued Accounting Pronouncements

The Company has evaluated recent accounting pronouncements and their adoption has not had or is expected to have a material impact on the Company’s financial position, or statements.

NOTE 3 – CONTRACT ASSETS AND LIABILITIES

Contract Balances

The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones. Generally, billing occurs subsequent to revenue recognition, resulting in contract assets. However, Omnitek sometimes receives advances or deposits from its customers, before revenue is recognized, resulting in billings in excess of costs and estimated earnings on uncompleted contracts (contract liabilities).  

The table below reconciles the net excess billings to the amounts included in the balance sheets at those dates: 

NOTE 4 – INVENTORIES

Inventories are located in Vista, California and at December 31, 2019 and 2018 consisted of the following:

The Company has established an allowance for obsolete inventory.  Expense for obsolete inventory was $242,846 and $97,436, for the years ended December 31, 2019 and December 31, 2018, respectively.

Page 44

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 5 – PROPERTY AND EQUIPMENT

Property and equipment at December, 2019 and 2018 consisted of the following:

Depreciation expense for the years ended December 31, 2019 and 2018 was $567 and $7,590, respectively.

NOTE 6 – CUSTOMER DEPOSITS

The Company may require a customer deposit from domestic and international customers.  As of December 31, 2019 and 2018 the Company had customer deposits of $163,681 and $140,338, respectively.

On September 11, 2019 the Company borrowed $12,000 from a board member. The loan was evidenced by an unsecured promissory note which bears simple interest at the rate of 8% per annum. The principal amount of the note and all accrued interest was due and payable on or before December 11, 2019. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of June 30, 2020.

On May 28, 2019 the Company issued a Working Capital Promissory Note to the Company’s CEO for loans made to the Company during the calendar year 2019. The note has an annual interest rate of 5%, is unsecured and had an original maturity date of December 31, 2019. During 2019 the Company’s CEO made cumulative loans to the Company of $15,000. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of December 31, 2020.

On January 19, 2017 the Company issued a promissory note for $15,000 to a related party. The note has an annual interest rate of 5% and is unsecured. The principal amount of the note and all accrued interest is due and payable on

or before January 19, 2020.

As of December 31, 2019 and December 31, 2018 Note Payable – Related Party consisted of the following:

NOTE 8 – DEBT

Note payable

The Convertible Note Payable (see Note 9) matured on December 11, 2019, with an outstanding principal balance of $40,000. The Lender elected to convert $25,000 of the outstanding principal to restricted common stock.  Under the

Page 45

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

terms of the Allonge to Senior Secured Convertible Promissory Note and Agreement, the remaining principal balance of $15,000 is due and payable with an extended maturity date of May 11, 2020. As of December 31, 2019 and December 31, 2018 Note Payable consisted of the following:

Convertible Notes Payable

On June 15, 2018 the Company entered into a Securities Purchase Agreement with an accredited investor, under which the investor purchased a Secured Convertible Promissory Note from the Company in the principal amount of $100,000. Under the terms of the Note simple interest will accrue at a rate of 10% per annum. The note will automatically mature and be due and payable on the eighteen (18) month anniversary. The Company shall make principal payments under the Note in the amount of $5,000 per month, beginning on the seventh month anniversary and continuing each month thereafter through the maturity date. Also commencing on the seventh month anniversary of the Note, the Company shall make interest payments under this Note based on the unpaid principal balance. The Note is secured by the inventory of the Company in accordance with a Security Agreement executed concurrently with the Note and UCC-1 Financing Statement perfecting said security interest.  The Note includes a conversion feature wherein, under certain circumstances, the Lender may request a portion of the principal repayment be converted and payable in restricted shares of the Company’s Common Stock at the lesser of five cents ($0.05) per share or 90% of the average closing price calculated over the prior 20 trading days, but not less than $.0025 per share. The floor of $0.025 per share prevents the embedded conversion option from qualifying for derivative accounting under ASC 815-15 “Derivative and Hedging”.

In accordance with the terms of the Secured Convertible Promissory Note, the lender elected to convert $25,000 of the outstanding principal balance (totaling $40,000) of the note on the maturity date to restricted shares of the Company’s Common Stock at five cents ($0.05) per share. The remaining $15,000 of the principal balance was due and payable on the maturity date. Under the Allonge to Senior Convertible Promissory Note and Agreement entered into between the lender and the Company, the due date for the remaining $15,000 principal balance was extended to March 11, 2020. As of December 31, 2019 the outstanding principal balance of $15,000 has been reclassified to Note Payable since there is no longer a conversion feature associated with this balance.

As of December 31, 2019 and December 31, 2018 Convertible Note Payable consisted of the following:

NOTE 9 – COMMITMENTS

As of December 31, 2019 and 2018, the Company had outstanding purchase commitments for inventory totaling $152,583 and $133,141, respectively. Of these amounts, the Company had made prepayments of $18,645 as of December 31, 2019 and $21,956 as of December 31, 2018 and had commitments for future cash outlays for inventory totaling $133,938 and $111,185, respectively.

Effective September 1, 2019 the Company entered into the Fourth Amendment to the Lease for its facility, reducing the size of the leased space to 21,786 square feet and extending the lease term to August 31, 2020, at which time a new lease extension has to be negotiated. The current lease payment is $14,161 per month, plus common area maintenance expenses (CAM).  Under the amended lease, past due rent is payable at monthly installments of $10,000, until such time as the past due rent has been paid in full. The lease is not subject to the right-of-use asset rules under ASU 2016-2 because it qualifies for the short-term lease exception under that pronouncement.

Page 46

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

As of December 31, 2019 the outstanding balance was $62,529.

The security deposit of $14,000 remained the same.

NOTE 10 – RELATED PARTY TRANSACTIONS

Accounts Receivable – Related Parties

The Company holds a non-controlling interest in various distributors in exchange for use of the Company’s name and logo. As of December 31, 2019, the Company owned a 15% interest in Omnitek Engineering Thailand Co. Ltd. and a 20% interest in Omnitek Peru S.A.C.  As of December 31, 2019 and December 31, 2018, the Company was owed $16,712 and $6,666, respectively, by related parties for the purchase of products and services.

Accrued Management Expenses

During the periods ended December 31, 2019 and December 31, 2018, the Company’s president and chief financial officer were due amounts for services performed for the Company.  As of December 31, 2019 and December 31, 2018 the accrued management fees consisted of the following:

NOTE 11 – STOCKHOLDERS’ EQUITY

Common Stock

On July 7, 2018 the Company issued 139,320 shares of its restricted common stock in consideration of a capital contribution via the conversion by a board member of $15,799, constituting unpaid principal of $15,000 and accrued interest of $799, owing under that certain Promissory Note dated November 7, 2017.

On September 6, 2019 the Company entered into a Securities Purchase Agreement (the “Purchase Agreement”) with a purchaser wherein the purchaser agreed to buy an aggregate of 3,579,014 restricted shares of common stock of the Company at a price of $.1788 per share for an aggregate purchase price of $640,000. Subject to the default and penalty provisions in the Purchase Agreement, the sale and purchase of the restricted shares and

payment of the purchase price shall be made in 20 tranches as follows: (a) $75,000 payable on or before September 30, 2019 (tranche 1), (b) the balance of the purchase price paid in 18 monthly tranches, at a minimum of $10,000 per month with a total quarterly payment of no less than $90,000, and (c) a final payment of $25,000 on or before April 1, 2021(tranche 20). In accordance with these terms, purchaser paid $75,000 on September 30, 2019 and was issued 419,463 restricted shares of the Company’s restricted common stock. Between October 1, 2019 and December 31, 2019 the purchaser made cumulative payments of $20,000 towards the $90,000 required under the agreement and was therefore in default under the terms of the agreement. In accordance with a provision in the agreement the Company elected to waive the default but assess a $.03 per share penalty for all future installment payments, increasing the purchase price to $.2033 per share. The $20,000 paid by the purchaser as of December 31, 2019 has been classified as Common Stock Subscribed on the balance sheet.

Additionally, subject to the payment by the purchaser of the additional sum of $25,000 by September 30, 2019, the Company shall grant to the purchaser, an option to purchase an additional 3,579,014 restricted shares of

Page 47

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 11 – STOCKHOLDERS’ EQUITY (Continued)

common stock for an additional $640,000. The $25,000 option purchase price is consideration for the option and shall be non-refundable and shall not be applied to the purchase of any restricted shares. The purchaser may exercise the option within six months of the initial (tranche 1) payment (i.e., September 30, 2019) by paying the initial option tranche exercise payment of $75,000. If the purchaser has not exercised and paid the initial option exercise payment of $75,000 by March 31, 2020 the option to purchase the option shares shall expire and be terminated. The purchaser made a timely payment of $25,000 on September 30, 2019 to purchase the option but did not make the initial option tranche exercise payment of $75,000 by March 31, 2020. Therefore, the option to purchase the option shares has expired.

On December 31, 2019 the Company issued 500,000 shares of its restricted common stock in consideration of a capital contribution via the conversion of $25,000 of unpaid principal owing under that certain Convertible Note dated June 11, 2018 (see Note 9).

Options and Warrants

During the years ended December 31, 2019 and 2018, the Company granted 450,000 and 590,000 options for services, respectively.  During the years ended December 31, 2019 and 2018, respectively, the Company recognized expense of $49,786 and $37,730 related to options that vested during the years, pursuant to ASC Topic 718. The total remaining amount of compensation expense to be recognized in future periods is $7,014. No future compensation expense has been calculated for 150,000 options that were granted in 2015 due to the low probability that any of these options will vest before maturity.  

In April 2007, the Company’s shareholders approved its 2006 Long-Term Incentive Plan (“the 2006 Plan”).   Under the 2006 plan, the Company may issue up to 10,000,000 shares of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of December 31, 2014 the remaining 2,590,000 options previously issued under the plan expired. On August 3, 2011 the Board of Directors adopted the Omnitek Engineering Corp. 2011 Long-term Incentive Plan (the “2011 Plan”), under which 1,000,000

shares of Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of December 31, 2019 the Company has a total of 600,000 options issued under the plan. On September 11, 2015 the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long Term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of the Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of December 31, 2019 the Company has a total of 2,065,556 options issued under the plan. In October 2017, the Company’s shareholders approved its 2017 Long-Term Incentive Plan (the “2017 Plan”). Under the 2017 plan, the Company may issue up to 5,000,000 shares of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of December 31, 2019, the Company has a total of 750,000 options issued under the plan. During the twelve months ended December 31, 2019 and 2018 the Company issued -0- and -0- warrants, respectively.The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value.  The Company estimates the fair value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock. When determining expected volatility, the Company considers the historical performance of the Company’s stock, as well as implied volatility. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant, based on the options’ expected term. The expected term of the options is based on the Company’s evaluation of option holders’ exercise patterns and represents the period of time that options are expected to remain unexercised. The Company uses historical data to estimate the timing and amount of forfeitures.

Page 48

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 11 – STOCKHOLDERS’ EQUITY (Continued)

The following table presents the assumptions used to estimate the fair values of the stock options granted:

A summary of the status of the options granted at December 31, 2019 and December 31, 2018 and changes during the years then ended is presented below:  

A summary of the status of the options outstanding at December 31, 2019 is presented below:

A summary of the status of the options and warrants outstanding at December 31, 2018 is presented below:

Page 49

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 12 – INCOME TAXES

The provision for income taxes for the year ended December 31, 2019 and 2018 consists of the following:

Net deferred tax assets consist of the following components as of December 31, 2019 and 2018:

The income tax provision differs from the amount of income tax determined by applying the estimated U.S. federal and state income tax rate of 24% as of December 31, 2019 and December 31, 2018 to pretax income

from continuing operations for the year ended December 31, 2019 and 2018 due to the following:  

On December 21, 2017, the TCJA was enacted. Among other things, the TCJA reduces the U.S. federal corporate tax rate from 35 percent to 21 percent beginning January 1, 2018, requires companies to pay a one-time transition tax on certain previously unremitted earnings on non-U.S. subsidiaries, creates new taxes on certain foreign sourced

earnings and imposes additional limitations on certain deductions, including interest expense and net operating losses arising after 2017. The Company has assessed the impact of the TCJA and is not subject to the one-time

Page 50

OMNITEK ENGINEERING CORP.

December 31, 2019 and 2018

NOTE 12 – INCOME TAXES (continued)

transition tax. The Company remeasured certain deferred tax assets and liabilities based on the rates that they are expected to reverse in the future, which is generally 21 percent under TCJA. The decrease in the Company’s net deferred tax assets was offset by a corresponding decrease in its valuation allowance.

At December 31, 2019, the Company had net operating loss carry forwards of approximately $6,821,469 through 2034.  No tax benefit has been reported in the December 31, 2019 financial statements since the potential tax benefit is offset by a valuation allowance of the same amount. Due to the change in ownership provisions of the Tax Reform Act of 1986, net operating loss carry forwards for Federal income tax reporting purposes are subject to annual limitations. Should a change in ownership occur, net operating loss carry forwards may be limited as to use in future years.

NOTE 13 – SUBSEQUENT EVENTS

On January 7, 2020, Richard Miller notified the Company of his resignation as a director and the Chief Financial Officer of the Company, effective February 7, 2020.

On January 7, 2020, the Company issued 500,000 restricted shares of Common Stock to Jack Ferraro upon the conversion of $25,000 of the unpaid principal owing under that certain Senior Secured Promissory Note dated June 11, 2018 (the “Note”).  The shares were issued at a price of $0.05 per the terms of the Note.  No underwriters were used. The shares were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933.  Mr. Ferraro is an “Accredited Investor” as defined under Rule 501 of Regulation D of the Act and has such knowledge and experience and possessed such information as it deemed necessary to make an informed investment decision.

On January 19, 2020 the Company and Werner Funk, President and CEO, agreed to a one-year extension of the $15,000 related party note payable due to Mr. Funk. The extended due date is January 19, 2021.  

On March 11, 2020 the Company executed the Amendment and Agreement to the Allonge to the Secured Senior Convertible Promissory Note (the “Agreement”). The Agreement amended the original Allonge to Senior Convertible Promissory Note and Agreement by extending the due date from March 11, 2020 to May 15, 2020.  

On March 27, 2020 the Company granted a total of $150,000 Non-Qualified Stock Options pursuant to the 2017 Long-Term Incentive Plan. The Options were allocated as follows: 50,000 Options to the CEO for past and continued services (vest and exercisable immediately) and 50,000 Options each to two outside directors (total of 100,000 Options) for past and continued services (vest and exercisable immediately).

In December 2019, a novel strain of coronavirus disease (“COVID-19”) was first reported in Wuhan, China. Less than four months later, on March 11, 2020, the World Health Organization declared COVID-19 a pandemic. The extent of COVID-19’s impact on the Company’s operational and financial performance will depend on future developments, including the duration, spread and intensity of the pandemic, all of which are uncertain and difficult to predict considering the rapidly evolving landscape. As a result, it is not currently possible to ascertain the overall impact of COVID-19 on the Company’s business. However, if the pandemic continues to evolve into a severe worldwide health crisis, the disease could have a material adverse effect on the Company’s business, results of operations, financial condition and cash flows.

Page 51

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE 

None.

Evaluation of Disclosure Controls and Procedures

Management, with the participation of the Chief Executive Officer and Chief Financial Officer, conducted an evaluation of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended) as of December 31, 2019.  Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that our disclosure controls and procedures were not effective as of December 31, 2019.

Management's Annual Report on Internal Control Over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting can also be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements will not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, the risk.

Management performed an assessment of the effectiveness of our internal control over financial reporting, using criteria established in the Internal Control - Integrated Framework  issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO-2013”). Based on that assessment, management identified  material weaknesses in internal control over financial reporting as of December 31, 2019 as further described below. Due to these material weaknesses, management concluded that internal controls over financial reporting as of December 31, 2019 were not effective, based on COSO’s framework.

A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the Company’s annual or interim financial statements will not be prevented or detected on a timely basis.

As a result of our assessment, we have determined that there is a deficiency with regard to the lack of a complete backup process for our electronic financial information and inventory systems.  There is limited stored backup offsite or in a media safe, and as such, there are no regularly run test restorations of said financial information.  We also determined that the Company did not maintain sufficient monitoring review controls with respect to accounting for complex transactions. Additionally, we determined that the Company has a material weakness that relates to a lack of segregation of duties.

Management believes that the material weaknesses set forth above did not have any effect on the Company’s financial results.

This Annual Report does not include an attestation report of the company's registered public accounting firm regarding internal control over financial reporting.

Remediation Plan for the Material Weaknesses

Page 52

Management has been engaged in developing remediation plans to address the above material weaknesses. In order to address and resolve these deficiencies we are currently researching the options available given our financial means to do the following: (1) have a regularly scheduled and dependable offsite backup of our Company records that will allow us to restore our data in the event of a system failure, and (2) hire outside consultants to review the Company’s financial statements for complex transactions. As we continue to evaluate and work to improve our internal control over financial reporting, we may determine to take additional measures to address the material weaknesses or determine to supplement or modify the remediation measures described above.

Changes in Internal Control Over Financial Reporting

There have been no changes in internal control over financial reporting that occurred during our fourth fiscal quarter of 2019 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Subsequent Events.

On January 7, 2020, Richard Miller notified the Company of his resignation as a director and the Chief Financial Officer of the Company, effective February 7, 2020.

On January 7, 2020, the Company issued 500,000 restricted shares of Common Stock to Jack Ferraro upon the conversion of $25,000 of the unpaid principal owing under that certain Senior Secured Promissory Note dated June 11, 2018 (the “Note”).  The shares were issued at a price of $0.05 per the terms of the Note.  No underwriters were used. shares were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933.  Mr. Ferraro is an “Accredited Investor” as defined under Rule 501 of Regulation D of the Act and has such knowledge and experience and possessed such information as it deemed necessary to make an informed investment decision.

On January 19, 2020 the Company and Werner Funk, President and CEO, agreed to a one-year extension of the $15,000 related party note payable due to Mr. Funk. The extended due date is January 19, 2021.  

On March 11, 2020 the Company executed the Amendment and Agreement to the Allonge to the Secured Senior Convertible Promissory Note (the “Agreement”). The Agreement amended the original Allonge to Senior Convertible Promissory Note and Agreement by extending the due date from March 11, 2020 to May 15, 2020.

On March 27, 2020 the Company granted a total of $150,000 Non-Qualified Stock Options pursuant to the 2017 Long-Term Incentive Plan. The Options were allocated as follows: 50,000 Options to the CEO for past and continued services (vest and exercisable immediately) and 50,000 Options each to two outside directors (total of 100,000 Options) for past and continued services (vest and exercisable immediately).

In December 2019, a novel strain of coronavirus disease (“COVID-19”) was first reported in Wuhan, China. Less than four months later, on March 11, 2020, the World Health Organization declared COVID-19 a pandemic. The extent of COVID-19’s impact on the Company’s operational and financial performance will depend on future developments, including the duration, spread and intensity of the pandemic, all of which are uncertain and difficult to predict considering the rapidly evolving landscape. As a result, it is not currently possible to ascertain the overall impact of COVID-19 on the Company’s business. However, if the pandemic continues to evolve into a severe worldwide health crisis, the disease could have a material adverse effect on the Company’s business, results of operations, financial condition and cash flows.

Page 53

PART III.

Identification of directors and executive officers

Our current directors and executive officers are as follows: