Attached files

file filename
EX-32 - EXHIBIT 32 - Omnitek Engineering Corpomtk_ex32.htm
EX-31.2 - EXHIBIT 31.2 - Omnitek Engineering Corpomtk_ex31z2.htm
EX-31.1 - EXHIBIT 31.1 - Omnitek Engineering Corpomtk_ex31z1.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d)

OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended:  March 31, 2020

 

Commission File Number: 000-53955

 

OMNITEK ENGINEERING CORP.

 (Exact name of Registrant as specified in its charter)

 

California

 

33-0984450

(State or other jurisdiction of incorporation or organization)

 

(I.R.S. Employer Identification No.)

 

1333 Keystone Way, #101, Vista, California 92081

 (Address of principal executive offices, Zip Code)

 

(760) 591-0089

 (Registrant's telephone number, including area code)

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes    No

 

Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Sec. 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).   Yes    No

 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See definitions of "large accelerated filer,"  "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

Accelerated filer

Non-accelerated filer

Smaller reporting company

Emerging growth company

 

 

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

 

Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).

 Yes    No  

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class

Trading

Symbols(s)

Name of each exchange on which registered

N/A

 

 

 

As of May 14, 2020, the Registrant had 21,339,865 shares of its no par value Common Stock outstanding.


 


Page 1


 

TABLE OF CONTENTS

 

 

Page

PART I - FINANCIAL INFORMATION

 

 

 

Item 1.       Financial Statements

 

 

 

Condensed Balance Sheets as of March 31, 2020 (unaudited) and December 31, 2019

3

 

 

Condensed Statements of Operations for the three months ended March 31, 2020 and March 31, 2019 (unaudited)

4

 

 

Condensed Statements of Cash Flows for the three months ended March 31, 2020 and March 31, 2019 (unaudited)

5

 

 

Condensed Statements of Stockholders’ Equity (Deficit) as of March 31, 2020 and March 31, 2019 (unaudited)

6

 

 

Notes to the Unaudited Condensed Financial Statements

7

 

 

Item 2.       Management's Discussion and Analysis of the Financial Condition and Results of Operations

16

 

 

Item 3.       Quantitative and Qualitative Disclosures about Market Risk

20

 

 

Item 4.       Controls and Procedures

20

 

 

PART II - OTHER INFORMATION

 

 

Item 1.       Legal Proceedings

21

 

 

Item 1A.    Risk Factors

21

 

 

Item 2.       Unregistered Sales of Equity Securities and Use of Proceeds

21

 

 

Item 3.       Defaults Upon Senior Securities

21

 

 

Item 5.       Other Information

22

 

 

Item 6.       Exhibits

22

 

 


Page 2


 

PART I

FINANCIAL INFORMATION

 

ITEM 1. FINANCIAL STATEMENTS 

 

OMNITEK ENGINEERING CORP.

Condensed Balance Sheets

 

March 31, 2020

 

 

December 31, 2019

 

(unaudited)

 

 

 

ASSETS

 

 

 

 

 

 

 

 

 

 

 

CURRENT ASSETS

 

 

 

 

 

Cash

$

26,817   

 

$

20,236   

Accounts receivable, net

 

30,542   

 

 

7,462   

Accounts receivable - related parties

 

27,287   

 

 

16,712   

Inventory, net

 

977,866   

 

 

1,022,365   

Contract assets

 

13,221   

 

 

13,221   

Deposits

 

2,501   

 

 

2,501   

Total Current Assets

 

1,078,234   

 

 

1,082,497   

 

 

 

 

 

 

PROPERTY & EQUIPMENT, net

 

1,674   

 

 

1,809   

 

 

 

 

 

 

OTHER ASSETS

 

 

 

 

 

Other noncurrent assets

 

30,425   

 

 

30,425   

Total Other Assets

 

30,425   

 

 

30,425   

 

 

 

 

 

 

TOTAL ASSETS

$

1,110,333   

 

$

1,114,731   

 

 

 

 

 

 

LIABILITIES AND STOCKHOLDERS' DEFICIT

 

 

 

 

 

 

 

 

 

 

CURRENT LIABILITIES

 

 

 

 

 

Accounts payable and accrued expenses

$

588,755   

 

$

409,020   

Accrued management compensation

 

577,658   

 

 

706,830   

Accounts payable - related parties

 

133,948   

 

 

134,077   

Note payable - related party

 

42,000   

 

 

27,000   

Note payable

 

15,000   

 

 

15,000   

Contract liabilities

 

75,000   

 

 

75,000   

Customer deposits

 

194,146   

 

 

163,681   

Total Current Liabilities

 

1,626,507   

 

 

1,530,608   

LONG-TERM LIABILITIES

 

 

 

 

 

Notes payable – related parties, net of current portion

 

-

 

 

15,000

 

 

 

 

 

 

Total Liabilities

 

1,626,507   

 

 

1,545,608   

 

 

 

 

 

 

STOCKHOLDERS' DEFICIT

 

 

 

 

 

Common stock, 125,000,000 shares authorized; no par value; 21,339,865 shares issued and outstanding

 

8,527,210   

 

 

8,527,210   

Common stock subscribed

 

51,000   

 

 

20,000   

Additional paid-in capital

 

12,008,250   

 

 

11,997,842   

Accumulated deficit

 

(21,102,634)  

 

 

(20,975,929)  

Total Stockholders' Deficit

 

(516,174)   

 

 

(430,877)   

 

 

 

 

 

 

TOTAL LIABILITIES AND STOCKHOLDERS' DEFICIT

$

1,110,333   

 

$

1,114,731   

 

The accompanying notes are an integral part of these condensed unaudited financial statements.


Page 3


 

OMNITEK ENGINEERING CORP.

Condensed Statements of Operations (unaudited)

 

 

 

 

 

 

For the Three Months Ended March 31, 2020

 

 

For the Three Months Ended March 31, 2019

 

 

 

 

REVENUES

$

230,937   

 

$  

351,348   

COST OF GOODS SOLD

 

110,068   

 

 

179,879   

INVENTORY RESERVE ADJUSTMENT

 

25,052   

 

 

25,000   

Total Cost of Goods Sold

 

135,120   

 

 

204,879   

GROSS MARGIN

 

95,817   

 

 

146,469   

 

 

 

 

 

 

OPERATING EXPENSES

 

 

 

 

 

 

 

 

 

 

 

General and administrative

 

185,963   

 

 

222,253   

Research and development

 

32,139   

 

 

24,843   

Depreciation and amortization

 

135   

 

 

160   

 

 

 

 

 

 

Total Operating Expenses

 

218,237   

 

 

247,256   

 

 

 

 

 

 

LOSS FROM OPERATIONS

 

(122,420)  

 

 

(100,787)  

 

 

 

 

 

 

OTHER INCOME (EXPENSE)

 

 

 

 

 

 

 

 

 

 

 

Interest expense

 

(4,885)  

 

 

(5,439)  

Other income

 

600   

 

 

-   

 

 

 

 

 

 

Total Other Income (Expense)

 

(4,285)  

 

 

(5,439)  

 

 

 

 

 

 

LOSS BEFORE INCOME TAXES

 

(126,705)  

 

 

(106,226)  

INCOME TAX EXPENSE

 

-   

 

 

-   

 

 

 

 

 

 

NET LOSS

$

(126,705)  

 

$

(106,226)  

 

 

 

 

 

 

BASIC AND DILUTED LOSS PER SHARE

$

(0.01)  

 

$

(0.01)  

 

 

 

 

 

 

WEIGHTED AVERAGE NUMBER OF COMMON SHARES OUTSTANDING - BASIC AND DILUTED

 

21,339,865   

 

 

20,420,402   

 

 

 

 

 

 

 

 

The accompanying notes are an integral part of these condensed unaudited financial statements.


Page 4


 

OMNITEK ENGINEERING CORP.

Condensed Statements of Cash Flows (unaudited)

 

 

 

 

 

 

 

For the Three Months Ended March 31, 2020

 

 

For the Three Months Ended March 31, 2019

 

 

 

 

OPERATING ACTIVITIES

 

 

 

 

 

Net loss

$

(126,705)  

 

$

(106,226)  

Adjustments to reconcile net loss to net cash provided by (used in)   operating activities:

 

 

 

 

 

Amortization and depreciation expense

 

135   

 

 

160   

Obsolete inventory adjustment

 

25,052   

 

 

25,000   

Options and warrants granted

 

10,408   

 

 

25,907   

Changes in operating assets and liabilities:

 

 

 

 

 

Accounts receivable

 

(23,080)  

 

 

(2,681)  

Accounts receivable–related parties

 

(10,575)  

 

 

(940)  

Deposits

 

-  

 

 

373  

Contract assets

 

-  

 

 

(21,685) 

Contract liabilities

 

 

 

13,840   

Inventory

 

19,447   

 

 

23,712   

Accounts payable and accrued expenses

 

14,409   

 

 

(2,858)  

Customer deposits

 

30,465   

 

 

19,228  

Accounts payable-related parties

 

(129)   

 

 

11,143   

Accrued management compensation

 

36,154   

 

 

46,500   

Net Cash Provided by (Used in) Operating Activities

 

(24,419)  

 

 

31,473   

 

 

 

 

 

 

INVESTING ACTIVITIES

 

 

 

 

 

Net cash from Investing Activities

 

-   

 

 

-   

 

 

 

 

 

 

FINANCING ACTIVITIES

 

 

 

 

 

Proceeds from stock subscription

 

31,000  

 

 

-

Payments on convertible note payable

 

-  

 

 

(15,000)

Net cash Provided by (Used in) Financing Activities

 

31,000  

 

 

(15,000)

 

 

 

 

 

 

NET CHANGE IN CASH

  

6,581  

 

  

16,473   

CASH AT BEGINNING OF YEAR

  

20,236   

 

  

17,060   

 

 

 

 

 

 

CASH AT END OF PERIOD

$

26,817   

 

$

33,533   

 

 

 

 

 

 

SUPPLEMENTAL DISCLOSURES OF CASH FLOWS

 

 

 

 

 

CASH PAID FOR:

 

 

 

 

 

Interest

$

4,319   

 

$

5,369   

 

 

 

 

 

 

 

 

The accompanying notes are an integral part of these condensed unaudited financial statements.


Page 5


 

OMNITEK ENGINEERING CORP.

Condensed Statements of Stockholders’ Equity (Deficit) (unaudited)

 

 

 

 

 

 

 

 

 

Common

Additional

 

 

 

 

Total

 

Common Stock

 

Stock

Paid-In

 

Accumulated

 

Stockholders'

 

Shares

 

Amount

 

Subscribed

Capital

 

Deficit

 

Deficit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance, December 31, 2019

21,339,865

 

$

8,527,210

$

20,000

$

11,997,842

 

$

(20,975,929)

 

$

(430,877)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Value of options and warrants

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 issued for services

-

 

 

-

 

-

 

10,408

 

 

-

 

 

10,408

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Deposit – stock purchase agreement

 

 

 

 

 

31,000

 

 

 

 

 

 

 

31,000

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Net loss for the three months ended

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 March 31, 2020

-

 

 

-

 

-

 

-

 

 

(126,705)

 

 

(126,705)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance, March 31, 2020

21,339,865

 

$

8,527,210

$

51,000

$

12,008,250

 

$

(21,102,634)

 

$

(516,174)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Common

Additional

 

 

 

 

Total

 

Common Stock

 

Stock

Paid-In

 

Accumulated

 

Stockholders'

 

Shares

 

 

Amount

 

Subscribed

Capital

 

Deficit

 

Equity

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance, December 31, 2018

21,420,402

 

$

8,427,210

$

-

$

11,923,056

 

$

(20,255,507)

 

$

94,759

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Value of options and warrants

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 issued for services

-

 

 

-

 

-

 

25,907

 

 

-

 

 

25,907

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Net loss for the three months ended

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 Marcch 31, 2019

-

 

 

-

 

-

 

-

 

 

(106,226)

 

 

(106,226)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance, March 31, 2019

20,420,402

 

$

8,427,210

$

-

$

11,948,963

 

$

(20,361,733)

 

$

14,440

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The accompanying notes are an integral part of these condensed unaudited financial statements.


Page 6


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 1 - CONDENSED FINANCIAL STATEMENTS

 

The accompanying financial statements have been prepared by the Company without audit. In the opinion of management, all adjustments (which include only normal recurring adjustments) necessary to present fairly the financial position, results of operations, and cash flows at March 31, 2020 and for all periods presented herein, have been made.

 

Certain information and footnote disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted.  It is suggested that these condensed financial statements be read in conjunction with the financial statements and notes thereto included in the Company's December 31, 2019 audited financial statements.  The results of operations for the periods ended March 31, 2020 and 2019 are not necessarily indicative of the operating results for the full years.

 

NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES

 

Use of Estimates

 

The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Actual results could differ from those estimates.

 

Revenue Recognition

 

In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer and is the unit of account for revenue recognition.

We recognize revenue on various products and services as follows:

Products - The Company recognizes revenue from the sale of products (e.g., filters and engine components) as performance obligations are satisfied. This type of revenue is primarily generated from the sale of finished product to customers. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risks and rewards transfer (i.e., the performance obligation has been satisfied).

 

Contracts – Revenues are recognized as performance obligations are satisfied over time (also known as percentage-of-completion method), measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, estimated profitability and associated change orders and claims, including those changes arising from contract penalty provisions and final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined.  

 

Performance Obligations

 

A performance obligation is a promise in a contract to transfer a distinct good or service to a customer and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority


Page 7


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (Continued)

 

of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.

 

Performance Obligations Satisfied Over Time

 

Revenues for Omnitek’s long-term contracts that satisfy the criteria for over time recognition (formerly known as percentage-of-completion method) is recognized as the work progresses. The majority of the revenue is derived from long-term engine development agreements that typically span between 12 to 24 months. Omnitek’s long-term contracts will continue to be recognized over time because our typical contract is for a customized asset with no alternative use and generally the Company has a right to payment for work completed to date. Under the new revenue standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as the Company incurs costs. Contract costs include labor and material. Revenue from products and services transferred to customers over time accounted for 0% and 7% of revenue for the periods ended March 31, 2020 and 2019, respectively.

 

Performance Obligations Satisfied at a Point in Time

 

Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer. Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 100% and 7% of revenue for the periods ended March 31, 2020 and 2019, respectively.

 

Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.

 

Pre-contract costs are generally not incurred by the Company.

 

Contract Estimates

 

Accounting for long-term contracts involves the use of various techniques to estimate total contract revenue and costs. For long-term contracts, Omnitek estimates the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognizes that profit over the life of the contract.  

 

Variable Consideration 

 

The transaction price for contracts may include variable consideration, which includes increases to transaction price for approved and unapproved change orders, claims and incentives, and reductions to transaction price for liquidated damages. Variable consideration historically has been insignificant.  


Page 8


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (Continued)

 

Disaggregation of Revenue

 

The following table presents Omnitek’s revenues disaggregated by region and product type: 

 

 

 

 

For the three months ended March 31,

 

 

 

For the three months ended March 31,

 

 

 

 

2020

 

 

 

 

 

2019

 

 

 

 

Consumer

Long-term

 

 

 

 

Consumer

Long-term

 

Segments

 

 

Products

Contract

Total

 

 

 

Products

Contract

Total

Domestic

 

$

178,753

-

178,753

 

 

$

115,838

-

115,838

International

 

 

52,184

-

52,184

 

 

 

209,500

26,010

235,510

 

 

$

230,937

-

230,937

 

 

$

325,338

26,010

351,348

 

 

 

 

 

 

 

 

 

 

 

 

Filters

 

$

112,042

-

112,042

 

 

$

239,886

-

239,886

Components

 

 

118,895

-

118,895

 

 

 

85,452

-

85,452

Engineering Services

 

 

-

-

-

 

 

 

-

26,010

26,010

 

 

$

230,937

-

230,937

 

 

$

325,338

26,010

351,348

 

Inventory

 

Inventory is stated at the lower of cost or market.  The Company’s inventory consists of finished goods and raw material and is located in Vista, California, consisting of the following:

 

 

 

 

 

Location : Vista, CA

 

March 31, 2020

 

 

December 31, 2019

Raw materials

$

934,659

 

$

935,834

Finished goods

 

1,057,152

 

 

1,073,623

Work in progress

 

-

 

 

1,800

Allowance for obsolete inventory

 

(1,013,945)

 

 

(988,892)

Total

$

977,866

 

$

1,022,365

 

The Company has established an allowance for obsolete inventory.  Expense for obsolete inventory was $25,052 and $25,000, for the periods ended March 31, 2020 and March 31, 2019, respectively.

 

Property and Equipment

 

Property and equipment at March 31, 2020 and December 31, 2019 consisted of the following:

    

 

March 31,

 

December 31,

 

2020

 

2019

Production equipment

$

64,673

 

$

64,673

Computers/Office equipment

 

28,540

 

 

28,540

Tooling equipment

 

12,380

 

 

12,380

Leasehold Improvements

 

42,451

 

 

42,451

Less: accumulated depreciation

 

(146,370)

 

 

(146,235)

Total

$

1,674

 

$

1,809

 

Depreciation expense for the periods ended March 31, 2020 and March 31, 2019 was $135 and $160, respectively.


Page 9


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 2 – SIGNIFICANT ACCOUNTING POLICIES (CONTINUED)

 

Basic and Diluted Loss per Share

 

The computation of basic earnings per share of common stock is based on the weighted average number of shares outstanding during the periods presented. The computation of fully diluted earnings per share includes common stock equivalents outstanding at the balance sheet date. The Company had 2,857,223 and 2,847,640 stock options and warrants that would have been included in the fully diluted earnings per share as of March 31, 2020 and March 31, 2019, respectively.  However, the common stock equivalents were not included in the computation of the loss per share computation because they are anti dilutive.  

 

Income Taxes

 

The Company accounts for income taxes in accordance with Accounting Standards Codification Topic 740, Income Taxes ("Topic 740"), which requires the recognition of deferred tax liabilities and assets at currently enacted tax rates for the expected future tax consequences of events that have been included in the financial statements or tax returns. A valuation allowance is recognized to reduce the net deferred tax asset to an amount that is more likely than not to be realized.

 

Topic 740 provides guidance on the accounting for uncertainty in income taxes recognized in a company's financial statements. Topic 740 requires a company to determine whether it is more likely than not that a tax position will be sustained upon examination based upon the technical merits of the position. If the more likely-than-not threshold is met, a company must measure the tax position to determine the amount to recognize in the financial statements.

 

The Company includes interest and penalties arising from the underpayment of income taxes in the statements of operations in the provision for income taxes. As of March 31, 2020 and December 31, 2019 the Company had no accrued interest or penalties related to uncertain tax positions. The Company files an income tax return in the U.S. federal jurisdiction and the state of California. With few exceptions, the Company is no longer subject to U.S. federal, state, and local, or non-U.S. income tax examinations by tax authorities for years before 2012.

 

Liquidity and Going Concern

 

Historically, the Company has incurred net losses and negative cash flows from operations.  As of March 31, 2020, the Company had an accumulated deficit of $21,102,634 and total stockholders’ deficit of $516,174.  At March 31, 2020, the Company had current assets of $1,078,234 including cash of $26,817, and current liabilities of $1,626,507, resulting in negative working capital of $(548,273). For the three months ended March 31, 2020, the Company reported a net loss of $126,705 and net cash used in operating activities of $24,419. Management believes that based on its operating plan, the projected sales for 2020, combined with funds available from its working capital will be sufficient to fund operations for the next twelve months.  However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. Whether, and when, the Company can attain profitability and positive cash flows from operations is uncertain. The Company is also uncertain whether it can raise additional capital. These uncertainties cast substantial doubt upon the Company’s ability to continue as a going concern. Our financial statements have been prepared on a going concern basis, which assumes the realization of assets and liquidation of liabilities in the normal course of operations. The financial statements do not include any adjustments relating to the recoverability or classification of recorded asset amounts or the amounts or classification of liabilities should we be unable to continue as a going concern.     

 

Recent Accounting Pronouncements

 

The Company has evaluated recent accounting pronouncements and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.


Page 10


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 3 – CONTRACT ASSETS AND LIABILITIES

 

The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones. Generally, billing occurs subsequent to revenue recognition, resulting in contract assets. However, Omnitek sometimes receives advances or deposits from its customers, before revenue is recognized, resulting in billings in excess of costs and estimated earnings on uncompleted contracts (contract liabilities).

 

The table below reconciles the net excess billings to the amounts included in the balance sheets at those dates:

 

 

March 31,

 

December 31,

 

2020

 

2019

Contract assets

$

13,221

 

$

13,221

Contract liabilities

$

(75,000)

 

$

(75,000)

Net amount of contract liabilities in excess of

 

 

 

 

 

  Contract assets

$

(61,779)

 

$

(61,779)

 

NOTE 4 – COMMITMENTS

 

Effective September 1, 2019, the Company entered into the Fourth Amendment to the Lease for its facility, reducing the size of the leased space to 21,786 square feet and extending the lease term to August 31, 2020, at which time a new lease extension has to be negotiated. . The current lease payment is $14,161 per month, plus common area maintenance expenses (CAM).  Under the amended lease, past due rent is payable at monthly installments of $10,000, until such time as the past due rent has been paid in full. The lease is not subject to the right-of-use asset rules under ASU 2016-2 because it qualifies for the short-term lease exception under that pronouncement.

 

As of March 31, 2020 the outstanding balance was $62,529.

 

The security deposit of $14,000 remained the same.

 

NOTE 5 - RELATED PARTY TRANSACTIONS

 

Accounts Receivable – Related Parties

The Company holds a non-controlling interest in various distributors in exchange for use of the Company’s name and logo. As of March 31, 2020, the Company owned a 15% interest in Omnitek Engineering Thailand Co. Ltd. and a 20% interest in Omnitek Peru S.A.C.  As of March 31, 2020 and December 31, 2019, the Company was owed $27,287 and $16,712, respectively, by related parties for the purchase of products and services.

 

Accounts Payable – Related Parties

The Company regularly incurs expenses that are paid to related parties and purchases goods and services from related parties. As of March 31, 2020 and December 31, 2019, the Company owed related parties for such expenses, goods and services in the amounts of $133,948 and $134,077, respectively.


Page 11


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 5 - RELATED PARTY TRANSACTIONS (Continued)

 

Accrued Management Compensation

For the periods ended March 31, 2020 and December 31, 2019, the Company’s president and chief financial officer were due amounts for services performed for the Company.  As of March 31, 2020 and December 31, 2019 the accrued management fees consisted of the following:

 

 

March 31,

 

December 31,

 

 

2020

 

2019

 

Amounts due to the president

 

$

577,658

 

 

$

541,504

 

Amounts due to the chief financial officer

 

 

-

 

 

 

165,326

 

Total

 

$

577,658

 

 

$

706,830

 

 

The chief financial officer resigned on January 7, 2020 (effective February 7, 2020). Prior amounts due to the chief financial officer were reclassified to accounts payable and accrued liabilities on the balance sheet at March 31, 2020.

 

NOTE 6 – NOTES PAYABLE - RELATED PARTIES

 

On September 11, 2019 the Company borrowed $12,000 from a board member. The loan was evidenced by an unsecured promissory note which bears simple interest at the rate of 8% per annum. The principal amount of the note and all accrued interest was due and payable on or before December 11, 2019. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of June 30, 2020

 

On May 28, 2019 the Company issued a Working Capital Promissory Note to the Company’s CEO for loans made to the Company during the calendar year 2019. The note has an annual interest rate of 5%, is unsecured and had an original maturity date of December 31, 2019. During 2019 the Company’s CEO made cumulative loans to the Company of $15,000. Under the terms of a Promissory Note Extension, the principal amount of the note and all accrued interest is due and payable on or before the extended maturity date of December 31, 2020.

 

On January 19, 2017 the Company issued a promissory note for $15,000 to a related party. The note has an annual interest rate of 5% and is unsecured. The principal amount of the note and all accrued interest is due and payable on or before January 19, 2020.As of March 31, 2020, and December 31, 2019 Note Payable – Related Party consisted of the following:

 

 

March 31,

 

December 31,

 

2020

 

2019

Note payable, related party, current portion

 

$

42,000

 

 

$

27,000

Note payable, related party, net of current portion

 

 

 

 

 

 

15,000

Total

 

$

42,000

 

 

$

42,000


Page 12


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 7 – NOTE PAYABLE

 

On December 11, 2019, a convertible notes payable matured with an outstanding principal balance of $40,000. The Lender elected to convert $25,000 of the outstanding principal to restricted common stock.  Under the terms of the Allonge to Senior Secured Convertible Promissory Note and Agreement, the remaining principal balance of $15,000 is due and payable with an extended maturity date of May 11, 2020. As of March 31, 2020, and December 31, 2019 Note Payable consisted of the following:

 

 

March 31,

 

December 31,

 

2020

 

2019

Note payable

$

15,000

 

$

15,000

Total

$

15,000

 

$

15,000

 

NOTE 8 -  STOCK OPTIONS AND WARRANTS

 

During the three months ended March 31, 2020 and 2019, the Company granted 150,000 and 250,000 options for services, respectively. During the three months ended March 31, 2020 and 2019, the Company recognized expense of $10,408 and $25,907, respectively, for options that vested during the periods pursuant to ASC Topic 718. As of March 31, 2020 total remaining amount of compensation expense to be recognized in future periods is

$5,305.

 

On August 3, 2011 the Board of Directors adopted the Omnitek Engineering Corp. 2011 Long-term Incentive Plan (the “2011 Plan”), under which 1,000,000 shares of Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of March 31, 2020 the Company has a total of 125,000 options issued under the 2011 Plan. On September 11, 2015 the Board of Directors adopted the Omnitek Engineering Corp. 2015 Long Term Incentive Plan (the “2015 Plan”), under which 2,500,000 shares of the Company’s Common Stock were reserved for issuance of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of March 31, 2020 the Company has a total of 1,915,556 options issued under the 2015 Plan. In October 2017, the Company’s shareholders approved its 2017 Long-Term Incentive Plan (the “2017 Plan”). Under the 2017 plan, the Company may issue up to 5,000,000 shares of both Incentive Stock Options to employees only and Non-Qualified Stock Options to employees and consultants at its discretion. As of March 31, 2020, the Company has a total of 816,667 options issued under the 2017 Plan.  During the three months ended March 31, 2020 and 2019 the Company issued -0- and -0- warrants, respectively.

                    

                    The Company recognizes compensation expense for stock-based awards expected to vest on a straight-line basis over the requisite service period of the award based on their grant date fair value.  The Company estimates the fair

value of stock options using a Black-Scholes option pricing model which requires management to make estimates for certain assumptions regarding risk-free interest rate, expected life of options, expected volatility of stock and expected dividend yield of stock. When determining expected volatility, the Company considers the historical performance of the Company’s stock, as well as implied volatility. The risk-free interest rate is based on the U.S. Treasury yield curve in effect at the time of grant, based on the options’ expected term. The expected term of the options is based on the Company’s evaluation of option holders’ exercise patterns and represents the period of time that options are expected to remain unexercised. The Company uses historical data to estimate the timing and amount of forfeitures.


Page 13


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


The following table presents the assumptions used to estimate the fair values of the stock options granted:

 

 

 

 

 

 

March 31, 2020

 

March 31, 2019

Expected volatility

159 %

 

132 %

Expected dividends

0 %

 

0 %

Expected term

7 Years   

 

7 Years   

Risk-free interest rate

0.60 %

 

2.62 %

 

NOTE 8 -  STOCK OPTIONS AND WARRANTS (Continued)

 

A summary of the status of the options and warrants granted at March 31, 2020 and December 31, 2019 and changes during the periods then ended is presented below:  

 

 

March 31,

 

December 31,

 

2020

 

2019

 

 

 

 

Weighted-Average

 

 

 

 

Weighted-Average

 

Shares

 

 

Exercise Price

 

Shares

 

 

Exercise Price

Outstanding at beginning of year

2,940,556   

 

$

0.25   

 

2,965,556   

 

$

0.63   

Granted

150,000   

 

 

0.06   

 

450,000   

 

 

0.08   

Exercised

-   

 

 

-   

 

-   

 

 

-   

Expired or cancelled

-   

 

 

-   

 

(475,000)  

 

 

2.49   

Outstanding at end of period

3,090,556   

 

 

0.24   

 

2,940,556   

 

 

0.25   

Exercisable

2,857,223   

 

$

0.21   

 

2,672,223   

 

$

0.23   

 

A summary of the status of the options and warrants outstanding at March 31, 2020 is presented below:

 

Range of Exercise Prices

 

Number Outstanding

 

Weighted-Average Remaining Contractual Life

 

 

Number Exercisable

 

Weighted-Average Exercise Price

 

 

 

 

 

 

 

 

 

 

$0.01-0.99

 

3,040,556

 

4.08 years

 

 

2,807,223

 

0.20

$1.00-1.99

 

50,000

 

0.12 years

 

 

50,000

 

1.13

 

 

 

 

 

 

 

 

 

 

$0.01-2.99

 

3,090,556

 

4.02 years

 

 

2,857,223

 

$0.21

 

 

 

 

 

 

 

 

 

 


Page 14


OMNITEK ENGINEERING CORP.

Notes to Financial Statements

March 31, 2020

(unaudited)


NOTE 9 -  SUBSEQUENT EVENTS

 

In December 2019, a novel strain of coronavirus disease (“COVID-19”) was first reported in Wuhan, China. Less than four months later, on March 11, 2020, the World Health Organization declared COVID-19 a pandemic. The extent of COVID-19’s impact on the Company’s operational and financial performance will depend on future developments, including the duration, spread and intensity of the pandemic, all of which are uncertain and difficult to predict considering the rapidly evolving landscape. As a result, it is not currently possible to ascertain the overall impact of COVID-19 on the Company’s business. However, if the pandemic continues to evolve into a severe worldwide health crisis, the disease could have a material adverse effect on the Company’s business, results of operations, financial condition and cash flows

 

On April 21, 2020, the Company obtained a loan (the “SBA Loan”) under the recently enacted Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) administered by the U.S. Small Business Administration. The Company received total proceeds of $199,000 from the SBA Loan. Interest on the unpaid principal balance shall accrue at the rate of three and 75/100 percent (3.75%). Pursuant to the terms of the Note, commencing May 21, 2021 (i.e., twelve (12) months from the Note date), the Company shall make principal and interest payments in the amount of $970 every month, with any unpaid princpal and accrued interest due and payable on April 21, 2050. The Note is secured by all tangible and intangible personal property owned by the Company.


Page 15



ITEM 2               MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

The following discussion of our financial condition and results of operations should be read in conjunction with the financial statements and related notes to the financial statements included elsewhere in this periodic report.  Some of the statements under “Management’s Discussion and Analysis,” “Description of Business” and elsewhere herein may include forward-looking statements which reflect our current views with respect to future events and financial performance. These statements include forward-looking statements both with respect to us specifically and the alternative fuels engines industry in general. Statements which include the words “expect,” “intend,” “plan,” “believe,” “project,” “anticipate,” “will,” and similar statements of a future or forward-looking nature identify forward-looking statements for purposes of the federal securities laws or otherwise. The safe harbor provisions of the federal securities laws do not apply to any forward-looking statements contained in this registration statement. 

 

All forward-looking statements address such matters that involve risks and uncertainties. Accordingly, there are or will be important factors that could cause our actual results to differ materially from those indicated in these statements. We undertake no obligation to publicly update or review any forward-looking statements, whether as a result of new information, future developments or otherwise.

 

If one or more of these or other risks or uncertainties materialize, or if our underlying assumptions prove to be incorrect, actual results may vary materially from what we projected. Any forward-looking statements you read herein reflect our current views with respect to future events and are subject to these and other risks, uncertainties and assumptions relating to our written and oral forward-looking statements attributable to us or individuals acting on our behalf and such statements are expressly qualified in their entirety by this paragraph.

 

Results of Operations

 

For the three months ended March 31, 2020 and 2019

 

Revenues were $230,937 for the three months ended March 31, 2020 compared with $351,348 for the three months ended March 31, 2019, a decrease of $120,411. The decrease in sales relates primarily to a reduction in filter sales between periods attributable primarily to the COVID-19 pandemic.

 

Our total cost of sales was $135,120 for the three months ended March 31, 2020 compared with $204,879 for the three months ended March 31, 2019, a decrease of $69,759. For both periods our total cost of goods sold consisted of two line items: cost of goods sold on revenues and a non-cash inventory reserve adjustment. Our cost of goods sold on revenues decreased to $110,068 for the three months ended March 31, 2020 (resulting in adjusted gross margin of 52%) from $179,879 for the three months ended March 31, 2019 (resulting in gross margin of 49%), a decrease of $69,811. The increase in adjusted gross margin for the three months ended March 31, 2020 over the same period a year earlier is attributable to product mix.

 

Operating expenses for the three months ended March 31, 2020 were $218,237 compared with $247,256 in the same period in 2019, a decrease of $29,019 or 12%. General and administrative expense for the three months ended March 31, 2020 was $185,963 compared with $222,253 for the three months ended March 31, 2019.  Major components of general and administrative expenses for the three months ended March 31, 2020 were professional fees of $32,477, rent expense of $32,138, and salary and wages of $64,177. This compares to professional fees of $29,025, rent expense of $37,000 and salaries and wages of $65,923 for the three months ended March 31, 2019.  For the three months ended March 31, 2020 research and development outlays were increased to $32,139 compared with $24,843 for the three months ended March 31, 2019.

 

Our net loss for the three months ended March 31, 2020 was $126,705, or ($0.01) per share, compared with a net loss of $106,226, or ($0.01) per share, for the three months ended March 31, 2019.  The increased net loss was primarily due to lower revenues during the three months ended March 31, 2020 over the same period a year earlier.


Page 16



Results for the three months ended March 31, 2020 reflect the impact of non-cash expenses, including the value of options and warrants granted in the amount of $10,408, depreciation and amortization of $135 and the inventory reserve adjustment of $25,052.  For the three month period ended March 31, 2019 non-cash expenses included options and warrants granted in the amount of $25,907, depreciation and amortization of $160 and the inventory reserve adjustment of $25,000.

 

Liquidity and Capital Resources

 

Overview

 

Our primary sources of liquidity are cash provided by financing activities and available working capital. Additionally, from time to time we may raise funds from the equity capital markets to fund our research and development programs, expansion of our business and general operations.

 

At March 31, 2020, our current liabilities totaled $1,626,507 and our current assets totaled $1,078,234, resulting in negative working capital of $548,273.  

 

We have no firm commitments or obligations for capital expenditures.  However, substantial discretionary expenditures may be required to enable us to conduct existing and planned product research, design, development, manufacturing, marketing and distribution of our products. We may need to raise additional capital to facilitate growth and support our long-term product development, manufacturing, and marketing programs. The Company has no established bank-financing arrangements. (See Note 9 to the Financial Statements regarding the loan the Company obtained from the Small Business Administration). Therefore, it is possible that we need to seek additional financing through subsequent future public or private sales of our securities, including equity securities. We may also seek funding for the development, manufacturing, and marketing of our products through strategic partnerships and other arrangements with corporate partners. There can be no assurance, however, that such collaborative arrangements or additional funds will be available when needed, or on terms acceptable to us, if at all. If adequate funds are not available, we may be required to curtail one or more of our research and development programs.

 

We have historically incurred significant losses, which have resulted in a total accumulated deficit of $21,102,634 at March 31, 2020, of which $5,604,135 is a direct result of derivative expense and change in fair value of derivative liability and is unrelated to our operations or cash flow. Management believes that based on its operating plan, the projected sales for 2020, combined with funds available from its working capital will be sufficient to fund operations for the next twelve months. However, there can be no assurance that operations and operating cash flows will continue at the current levels or improve in the near future. Whether, and when, the Company can attain profitability and positive cash flows from operations is uncertain. The Company is also uncertain whether it can raise additional capital. These uncertainties cast substantial doubt upon the Company’s ability to continue as a going concern.

 

Operating Activities

 

We realized a negative cash flow from operations of $24,419 for the three months ended March 31, 2020 compared with a positive cash flow of $31,473 during the three months ended March 31, 2019.  

 

Included in the operating loss of $126,705 for the three months ended March 31, 2020 are non-cash expenses, which are not a drain on our capital resources.  During the period, these non-cash expenses include the value of options and warrants granted in the amount of $10,408, depreciation and amortization of $135 and inventory reserve adjustment of $25,052. 


Page 17



Financing Activities

 

We realized a positive cash flow from financing activities of $31,000 for the three months ended March 31, 2020 compared with negative cash flow of $15,000 for the three months ended March 31, 2019.The positive cash flow for the three months ended March 31, 2020 relates to proceeds received on a stock subscription agreement with a qualified investor. The negative cash flow for the three months ended March 31, 2019 relates to principal repayments on convertible notes payable.

 

Off-Balance Sheet Arrangements

 

None.

 

Critical Accounting Policies and Estimates

 

Accounting Method and Use of Estimates

 

The Company's financial statements are prepared using the accrual method of accounting. The preparation of financial statements in conformity with generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Areas where significant estimates are required include the following:

 

Accounts Receivable

 

Trade receivables are carried at original invoice amount less an estimate made for doubtful receivables based on a review of all outstanding amounts on a monthly basis. Management determines the allowance for doubtful accounts by identifying troubled accounts and by using historical experience applied to an aging of accounts.

 

Inventory

 

Inventory is stated at the lower of cost or market. The Company’s inventory consists of finished goods and raw materials. The Company identifies items in its inventory that have not been sold in a timely manner. Accordingly, the Company has established an allowance for the cost of such obsolete inventory.

 

Long-lived assets

 

The Company assesses the recoverability of its long-lived assets annually and whenever circumstances would indicate that there may be an impairment. The Company compares the estimated undiscounted future cash flows to the carrying value of the long-lived assets to determine if an impairment has occurred. In the event that an impairment has occurred, the Company recognizes the impairment immediately.

 

Contract assets and liabilities

The timing of revenue recognition, billings and cash collections results in billed accounts receivable and costs and estimated earnings in excess of billings on uncompleted contracts (contract assets) on the balance sheet. For Omnitek’s long-term contracts, amounts are generally billed as work progresses in accordance with agreed-upon contractual terms, either at periodic intervals or upon achievement of contractual milestones. Generally, billing occurs subsequent to revenue recognition, resulting in contract assets. However, Omnitek sometimes receives advances or deposits from its customers, before revenue is recognized, resulting in billings in excess of costs and estimated earnings on uncompleted contracts (contract liabilities). 


Page 18



Revenue Recognition

In general, revenue is recognized when control of the promised goods is transferred to our customers, in an amount that reflects the consideration to which we expect to be entitled in exchange for the goods or services. In order to achieve that core principle, a five-step approach is applied: (1) identify the contract with a customer, (2) identify the performance obligations in the contract, (3) determine the transaction price, (4) allocate the transaction price to the performance obligations in the contract, and (5) recognize revenue allocated to each performance obligation when we satisfy the performance obligation. A performance obligation is a promise in a contract to transfer a distinct good or service to the customer, and is the unit of account for revenue recognition.

We recognize revenue on various products and services as follows:

Products - The Company recognizes revenue from the sale of products (e.g., filters and engine components) as performance obligations are satisfied. This type of revenue is primarily generated from the sale of finished product to customers. Those sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risks and rewards transfer (i.e., the performance obligation has been satisfied).

 

Contracts – Revenues are recognized as performance obligations are satisfied over time (also known as percentage-of-completion method), measured by either achievement of milestones or the ratio of costs incurred up to a given date to estimated total costs for each contract. Contract costs include all direct material, labor, subcontract and other costs. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, estimated profitability and associated change orders and claims, including those changes arising from contract penalty provisions and final contract settlements, may result in revisions to costs and income and are recognized in the period in which the revisions are determined.  

 

Performance Obligations

 

A performance obligation is a promise in a contract to transfer a distinct good or service to a customer, and is the unit of account in the new revenue standard. The contract transaction price is allocated to each distinct performance obligation and recognized as revenue when, or as, the performance obligation is satisfied. The majority of Omnitek’s contracts have a single performance obligation as the promise to transfer the individual goods or services is not separately identifiable from other promises in the contracts and, therefore, not distinct.

 

Performance Obligations Satisfied Over Time

 

Revenues for Omnitek’s long-term contracts that satisfy the criteria for over time recognition (formerly known as percentage-of-completion method) is recognized as the work progresses. The majority of the revenue is derived from long-term engine development agreements that typically span between 12 to 24 months. Omnitek’s long-term contracts will continue to be recognized over time because our typical contract is for a customized asset with no alternative use and generally the Company has a right to payment for work completed to date. Under the new revenue standard, the cost-to-cost measure of progress continues to best depict the transfer of control of assets to the customer, which occurs as the Company incurs costs. Contract costs include labor and material. Revenue from products and services transferred to customers over time accounted for 0% and 7% of revenue for the periods ended March 31, 2020 and 2019, respectively.

 

Performance Obligations Satisfied at a Point in Time

 

Revenue from product sales is recognized at a point in time. These sales predominantly contain a single delivery element and revenue is recognized at a single point in time when ownership, risk and rewards transfer. Upon fulfilment of the performance obligation, the customer is provided an invoice demonstrating transfer of control to the customer. Revenue from goods and services transferred to customers at a point in time accounted for 100% and 93% of revenue for the periods ended March 31, 2020 and 2019, respectively.


Page 19



Assurance-type warranties are the only warranties provided by the Company and, as such, Omnitek does not recognize revenue on warranty-related work. Omnitek generally provides a one-year warranty for products that it sells. Warranty claims historically have been insignificant.

 

Pre-contract costs are generally not incurred by the Company.

 

Contract Estimates

 

Accounting for long-term contracts involves the use of various techniques to estimate total contract revenue and costs. For long-term contracts, Omnitek estimates the profit on a contract as the difference between the total estimated revenue and expected costs to complete a contract and recognizes that profit over the life of the contract.  

 

Variable Consideration 

 

The transaction price for contracts may include variable consideration, which includes increases to transaction price for approved and unapproved change orders, claims and incentives, and reductions to transaction price for liquidated damages. Variable consideration historically has been insignificant.  

 

Recent Accounting Pronouncements

 

The Company has evaluated recent accounting pronouncements and their adoption has not had or is not expected to have a material impact on the Company’s financial position, or statements.

 

ITEM 3.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

ITEM 4.  CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

Disclosure controls and procedures are controls and procedures that are designed to ensure that information required to be disclosed in our reports filed under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC's rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by our company in the reports that it files or submits under the Exchange Act is accumulated and communicated to our management, including its principal executive and principal financial officers, or persons performing similar functions, as appropriate to allow timely decisions regarding required disclosure.

 

Our management carried out an evaluation, under the supervision and with the participation of our Principal Executive Officer, of the effectiveness of the design and operation of our disclosure controls and procedures pursuant to Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934 ("Exchange Act"). Based upon that evaluation, our Principal Executive Officer has concluded that our disclosure controls and procedures were not effective as of March 31, 2020. The material weakness, which relates to internal control over financial reporting, that was identified is: due to our small size, we do not have a proper segregation of duties in certain areas of our financial reporting process. This control deficiency, which is pervasive in nature, results in a reasonable possibility that material misstatements of the financial statements will not be prevented or detected on a timely basis.

 

Changes in Internal Controls

 

  There have not been any changes in the Company's internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended March 31, 2020 that have materially affected, or are reasonably likely to materially affect, the Company's internal control over financial reporting.


Page 20



PART II - OTHER INFORMATION

 

ITEM 1.  LEGAL PROCEEDINGS

 

We are not a party to any pending legal proceeding.  No federal, state or local governmental agency is presently contemplating any proceeding against the Company.  No director, executive officer or affiliate of the Company or owner of record or beneficially of more than five percent of the Company's common stock is a party adverse to the Company or has a material interest adverse to the Company in any proceeding.

 

ITEM 1A.  RISK FACTORS

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

ITEM 2.  UNREGISTERED SALE OF EQUITY SECURITIES AND USE OF PROCEEDS

 

On January 7, 2020, the Company issued 500,000 restricted shares of Common Stock to Jack Ferraro upon the conversion of $25,000 of the unpaid principal owing under that certain Senior Secured Promissory Note dated June 11, 2018 (the “Note”).  Since the conversion notice was received in December 2019 it was accounting for during the year ended December 31, 2019. The shares were issued at a price of $0.05 per the terms of the Note.  No underwriters were used. The Shares were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933.  Mr. Ferraro is an “Accredited Investor” as defined under Rule 501 of Regulation D of the Act and has such knowledge and experience and possessed such information as it deemed necessary to make an informed investment decision

 

On March 11, 2020 the Company executed the Amendment and Agreement to the Allonge to the Secured Senior Convertible Promissory Note (the “Agreement”). The Agreement amended the original Allonge to Senior Convertible Promissory Note and Agreement by extending the due date from March 11, 2020 to May 15, 2020

 

On March 27, 2020, the Company granted to Werner Funk, President and CEO, a Non-qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan, to purchase 50,000 shares of common stock at an exercise price of $0.066, representing 110% of the closing price (i.e., $0.06) of the common stock of the Corporation as of such date. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.

 

On March 27, 2020, in consideration for their services as independent directors, the Company granted to each of Messrs. Gary S. Maier and John M. Palumbo, a Non-Qualified Stock Option pursuant to the 2017 Long-Term Incentive Plan to purchase 50,000 shares of common stock, at an exercise price of $0.06, representing 100% of the closing price (i.e., $0.06) of the common stock of the Corporation as of such date. Said Options shall vest and be exercisable immediately and shall be exercisable for a period of seven years from the date of grant.

 

The securities were issued pursuant to an exemption from registration provided by Section 4(a)(2) of the Securities Act of 1933. The individual receiving the options is intimately acquainted with the Company’s business plan and proposed activities at the time of issuance, and possessed information on the Company necessary to make an informed investment decision.

 

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

 

None


Page 21



ITEM 5.  OTHER INFORMATION

 

Subsequent Events.

 

On April 21, 2020, the Company obtained a loan (the “SBA Loan”) under the recently enacted Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) administered by the U.S. Small Business Administration. The Company received total proceeds of $199,000 from the SBA Loan. Interest on the unpaid principal balance shall accrue at the rate of three and 75/100 percent (3.75%). Pursuant to the terms of the Note, commencing May 21, 2021 (i.e., twelve (12) months from the Note date), the Company shall make principal and interest payments in the amount of $970 every month, with any unpaid princpal and accrued interest due and payable on April 21, 2050. The Note is secured by all tangible and intangible personal property owned by the Company

 

ITEM 6.  EXHIBITS

 

(a)Documents filed as part of this Report. 

 

1. Financial Statements.  The condensed unaudited Balance Sheet of Omnitek Engineering Corp. as of March 31, 2020 and the audited balance sheet as of December 31, 2019, the condensed unaudited Statements of Operations for the three month periods ended March 31, 2020 and 2019, the condensed unaudited Statements of Cash Flows for the three month periods ended March 31, 2020 and 2019 and the condensed unaudited Statements of Stockholders’ Equity (Deficit) as of March 31, 2020 and 2019, together with the notes thereto, are included in this Quarterly Report on Form 10-Q. 

 

3. Exhibits. The following exhibits are either filed as a part hereof or are incorporated by reference. Exhibit numbers correspond to the numbering system in Item 601 of Regulation S-K. 

  

Exhibit

 

 

Number

 

Description of Exhibit

 

 

 

3(i)

 

Amended and Restated Articles of Incorporation(1)

3(ii)

 

Amended and Restated By-Laws Adopted July 12, 2012 (2)

31(i)

 

CEO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (3)

31(ii)

 

CFO certification pursuant to Section 302 of the Sarbanes – Oxley Act of 2002 (3)

32

 

CEO and CFO certification pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (3)

101

 

The following materials from the Company's Quarterly Report on Form 10-Q for the quarter ended March 31, 2020 formatted in Extensible Business Reporting Language ("XBRL"): (i) the balance sheets (unaudited); (ii) the statements of operations (unaudited); (iii) the statements of cash flows (unaudited); and, (iv) related notes.

(1)Previously filed on Form on Form 10 on April 27, 2010 

(2)Previously filed on Form 8-K on August 2, 2012 

(3)Filed herewith 


Page 22



SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

Omnitek Engineering Corp.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Picture 5 

 

Dated: May 14, 2020

 

 

 

 

 

By: Werner Funk

 

 

 

Its: Chief Executive Officer

Principal Executive Officer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Page 23