Use these links to rapidly review the document
TABLE OF CONTENTS

Table of Contents

UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

---

FORM 10-K

PRECISION OPTICS CORPORATION, INC.
(Exact name of registrant as specified in its charter)

22 East Broadway
Gardner, Massachusetts 01440
(Address of principal executive offices) (Zip Code)

(978) 630-1800
(Registrant's telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:    None

Securities registered pursuant to Section 12(g) of the Act:    Common Stock, $0.01 par value

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. o Yes     ý No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act. o Yes     ý No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. ý Yes     o No

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). o Yes     o No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of "large accelerated filer," "accelerated filer," and "smaller reporting company" in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act). o Yes     ý No

State the aggregate market value of the voting and non-voting common equity, held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant's most recently completed second fiscal quarter: $264,623 (based on a total of 240,566 shares of the registrant's common stock held by non-affiliates on December 31, 2009, at the closing price of $1.10 per share).

The number of shares of outstanding common stock of the registrant as of September 21, 2010 was 1,018,411.

Documents incorporated by reference:    None.

---

Table of Contents

PRECISION OPTICS CORPORATION, INC.
FORM 10-K

TABLE OF CONTENTS

2

---

Table of Contents

PART I

This annual report contains forward-looking statements as defined under the federal securities laws. All statements other than statements of historical facts included in this Annual Report on Form 10-K regarding our financial performance, business strategy and plans and objectives of management for future operations and any other future events are forward-looking statements and based on our beliefs and assumptions. Words such as "may," "will," "expect," "might," "believe," "anticipate," "intend," "could," "estimate," "project," "plan," and other similar words are one way to identify such forward-looking statements. Actual results could vary materially from these forward-looking statements. Such statements reflect our current view with respect to future events and are subject to certain risks, uncertainties, and assumptions, including, but without limitation, those risks and uncertainties contained in the Risk Factors section of this Annual Report on Form 10-K and our other filings made with the SEC. Although we believe that our expectations are reasonable, we can give no assurance that such expectations will prove to be correct. Based upon changing conditions, any one or more of these events described herein as anticipated, believed, estimated, expected or intended may not occur. All prior and subsequent written and oral forward-looking statements attributable to our Company or persons acting on our behalf are expressly qualified in their entirety by this cautionary statement.

ITEM 1.    BUSINESS.

HISTORY

We incorporated in Massachusetts in December 1982 and have been publicly-owned since November 1990. References to our Company contained herein include our two wholly-owned subsidiaries, Precise Medical, Inc. and Wood's Precision Optics Corporation, Limited, except where the context otherwise requires.

OUR BUSINESS

We have been a developer and manufacturer of advanced optical instruments since 1982. We design and produce high-quality medical instruments, micro-optics with characteristic dimensions less than 1 millimeter, or mm, and other advanced optical systems. Our medical instrumentation line includes laparoscopes, arthroscopes and endocouplers and a line of world-class 3-D endoscopes for use in minimally invasive surgical procedures. We are registered to the ISO 9001:2008, ISO 13485:2003, and Canadian Medical Devices Conformity Assessment System, or CMDCAS, Quality Standards and comply with the FDA Good Manufacturing Practices and the European Union Medical Device Directive for CE marking of our medical products. Our website is www.poci.com. Information contained on our website does not constitute part of this annual report.

Principal Products and Services and Methods of Distribution.

Medical Products: Endoscopes and Image Couplers. Since 1982, we have manufactured medical products such as endoscopes, as well as image couplers, beamsplitters and adapters, all of which are used as accessories to endoscopes. We have developed and sold endoscopes incorporating various optical technologies for use in a variety of minimally invasive surgical and diagnostic procedures. Our current line of specialized endoscopes include arthroscopes, which are used in joint surgery, laryngoscopes, which are used in the diagnosis of diseases of the larynx, laparoscopes, which are used in abdominal surgery, ENT scopes, which are used for ear, nose and throat procedures, and stereo endoscopes and cameras, which are used in cardiac and general surgery and enable surgeons to visualize the surgical field in 3-D imagery.

We produce autoclavable endoscopes for various applications, which are CE mark certified for European use and have been designed and tested to withstand sterilization by autoclave, which is sterilization in a superheated steam under pressure, as well as all other commonly used medical

3

---

Table of Contents

sterilization means. The major benefits of instruments that can be autoclaved include increased patient safety, quick turnaround, and elimination of hazardous sterilant and by-product materials, all of which provide increased value to the user compared to alternative sterilization methods.

Since 1985, we have developed, manufactured and sold a proprietary product line of instrumentation to couple endoscopes to video cameras. Included in this product line are imaging couplers. For example, the Series 200 Parfocal Zoom Couplers and the Series 950 Universal Couplers physically connect the endoscope to a video camera system and transmit the image viewed through the scope to the video camera. Our Series 800 Beamsplitters perform the same function while preserving for the viewer an eye port for direct, simultaneous viewing through the endoscope. These devices are sold primarily to endoscope and video camera manufacturers and suppliers for resale under our customers' names. All of the image couplers and beamsplitters that we manufacture are approved for surgery-approved sterilization. We believe we are one of only a few manufacturers of autoclavable image couplers worldwide.

Medical Products: Next Generation Lenslock™ Endoscopes. We continue to develop and ship our next generation endoscopes that incorporate our leading proprietary Lenslock™ technology (patent pending). We have shipped over 800 ENT endoscopes with diameter of 2.7 mm that incorporate Lenslock™ technology. We have completed prototypes of our 4 mm Lenslock™ sinuscope, and 5 mm Lenslock™ laproscope, and are actively pursuing development of our new 4 mm Lenslock™ wide field arthroscope. We believe that Lenslock™ technology has advantages over competitive products due to the ease of manufacture and repair, superior image quality, significant cost effectiveness and quality of repair. Further, we believe that incorporating this into our endoscope product line could lead to increased sales of this product.

Medical Products: Sub-millimeter Optics and Endoscopes. Utilizing developed proprietary techniques, including patent pending micro-precision™ lens fabrication technology, we design and manufacture ultra-small lenses, prisms and assemblies with sizes as small as 0.2 mm. Assemblies range in complexity from the combination of two lens elements to entire imaging systems utilizing multiple micro-optical elements in combination with larger, conventional optics. Developments in medical procedures requiring minimally invasive visualization in very small spaces, in such specialties as spinal surgery, neurosurgery, cardiothoracic surgery, cardiology and pulmonology, have led to products requiring lenses and endoscopes as small as 0.2 mm in diameter.

Utilizing our proprietary technology, we currently manufacture a number of products with length and/or diameter less than 1 mm and are actively expanding our product line in this area.

Medical Products: Custom Design and Device Production. We design and manufacture custom optical medical products to satisfy our customers' specific requirements. During fiscal year 2007, we completed development and began shipments of an advanced surgical visualization system to a significant new customer. We have received follow-on orders with deliveries continuing into fiscal year 2011. The size and extent of future follow-on orders will depend on market acceptance and other considerations.

Industrial Products. In addition to our medical products, we also sell components and assemblies such as image couplers and beamsplitters specially designed for industrial use, including the video-monitored examination of a variety of industrial cavities and interiors, as well as specialized borescopes for industrial applications. Utilizing micro-precision™ technology, we also design and manufacture sub-millimeter optical components and assemblies for industrial use.

Night Vision Optics. We continue to pursue a partnership effort for the proprietary development of a new class of color night vision devices including a new patent-pending eyepiece lens. We expect that the product incorporating our night vision lenses will be evaluated by the U.S. government in the near future. We cannot control the timing of current evaluations and cannot therefore predict when, if ever, these night vision lenses might begin to generate revenue.

4

---

Table of Contents

Optical System Design and Development Services. We are able to provide customers with advanced lens design, imaging analysis, optical system design, structural design and analysis, prototype production and evaluation, optics testing, and optical system assembly. Some of our efforts have led to optical system production business for our Company, and we believe our prototype development service may lead to new product production from time to time.

Competition and Markets.

We sell our products in a highly competitive market and we compete for business with both foreign and domestic manufacturers. Many of our current competitors are larger and have substantially greater resources than we do. In addition, there is an ongoing risk that other domestic or foreign companies who do not currently service or manufacture products for our target markets, some with greater experience in the optics industry and greater financial resources than we have, may seek to produce products or services that compete directly with ours.

We believe that competition for sales of our medical products and services, which have been principally sold to medical device companies who incorporate our products into their systems, is based on performance and other technical features, as well as other factors, such as scheduling and reliability, in addition to competitive pricing. We market and sell our endoscopes to customers for incorporation into their own product lines and for resale under their own name. A number of domestic and foreign competitors also sell endoscopes to these customers and our share of the endoscope market is nominal. We believe that, while our resources are substantially more limited than those of our competitors, we can compete successfully in this market on the basis of product quality, price, delivery and innovation.

Marketing.

During the last three years, we have made significant efforts to update our sales and marketing activities. As part of these efforts, we have generated and continue to generate new marketing materials for recently developed products, including a newly designed website, www.poci.com. Information on our website is not intended to be integrated into this report. Since initiating these efforts and on an ongoing basis, we have taken a much more comprehensive view of trade show opportunities, targeting those with specific relevance to recently developed products. We believe these efforts afford us a greater opportunity to reach and follow up a broader customer base than we have previously been able to achieve. These efforts have contributed to recent year-over-year revenue increases, and continue to generate prospects for our leading technologies including, Lenslock™, micro-precision™, and custom applications of our core optical capabilities. This includes renewed interest in some of our well-developed products such as our "classic" autoclavable endoscopes and endocouplers, as well as new applications with our micro (fiberoptic) endoscopes.

International Business.

We have had negligible direct export sales to date. However, our medical products have received the CE Mark Certification, which permits sales into the European marketplace. We may establish or use production facilities overseas to produce key components for our business, such as lenses. Since the 1990s we have maintained a Hong Kong subsidiary to support business and quality control activities as required throughout Asia. We believe that the cost savings from such production may be essential to our ability to compete on a price basis in the medical products area particularly and to our profitability generally.

Research and Development.

We believe that our future success depends to a large degree on our ability to continue to conceive and develop new optical products and services to enhance the performance characteristics and methods of

5

---

Table of Contents

manufacture of existing products. Research and development expenses are incurred on our own proprietary products and technology as well as on custom projects on behalf of customers. Accordingly, we expect to continue to seek to obtain product-related design and development contracts with customers and to invest our own funds on research and development. We spent $529,406 of our own funds net of reimbursements billed to customers of $374,284 on research and development in fiscal year 2010 and $737,791 of our own funds net of reimbursements billed to customers of $181,105 on research and development during fiscal year 2009.

We are currently incorporating our Lenslock™ technology (patent pending) into our line of endoscopes. This proprietary technology ensures lower cost, easier reparability and enhanced durability. We are also aggressively pursuing the design, development and manufacture of ultra-small instruments, some with lenses less than 1 mm in diameter, utilizing our micro-precision™ lens technology (patent pending).

Raw Materials and Principal Suppliers.

The basic raw material of the majority of our product line is precision grade optical glass, which we obtain from a few suppliers, principally SCHOTT North America, Inc. and Ohara Corporation. For optical thin film coatings, the basic raw materials we utilize are metals and dielectric compounds, which we obtain from a variety of chemical suppliers. Certain of the thin film coatings utilized in our products are currently procured from an outside supplier, but most thin film coatings are produced in-house. We believe that our demand for these raw materials and thin film coating services is small relative to the total supply, and that the materials and services required for the production of our products are currently available in sufficient production quantities and will be available for fiscal year 2011. We believe, however, that there are relatively few suppliers of the high quality lenses and prisms, which our endoscopes require. In response, we have established our own optical shop for producing ultra-high quality prisms, micro-optics and other specialized optics for a variety of medical and industrial applications.

Patents and Trademarks.

We rely, in part, upon patents, trade secrets and proprietary knowledge as well as personnel policies and employee confidentiality agreements concerning inventions and other creative efforts to develop and to maintain our competitive position. We do not believe that our business is dependent upon any patent, patent pending or license, although we believe that trade secrets and confidential know-how may be important to our scientific and commercial success.

We plan to file for patents, copyrights and trademarks in the United States and in appropriate countries to protect our intellectual property rights to the extent practicable. We hold the rights to several United States and foreign patents and have several patent applications pending, including those for our new generation of 3-D endoscopes, our Lenslock™ endoscope technology and our innovative micro-precision™ lens technology. These patents have expiration dates ranging from March 2015 to June 2028. We are not aware of any infringements of our patents. We plan to protect our patents from infringement in each instance where we determine that doing so would be economical in light of the expense involved and the level and availability of our financial resources. While we believe that our pending applications relate to patentable devices or concepts, these patents may not be issued and we may not be able to successfully defend these patents or effectively limit the development of competitive products and services.

Employees.

As of June 30, 2010, we had 26 employees, 21 of which were full-time employees. There were 14 employees in manufacturing, 6 in engineering/research and development, 1 in sales and marketing and

6

---

Table of Contents

5 in finance and administration. We are not a party to any collective bargaining agreements. We believe our relations with our employees are good.

Customers.

Revenues from our largest customers, as a percentage of total revenues, for fiscal years 2010 and 2009 were as follows:

No other customer accounted for more than 10% of our revenues in fiscal years 2010 and 2009. At June 30, 2010, receivables from our largest customers were 39%, 23% and 15% of the total accounts receivable.

Environmental Matters.

Our operations are subject to a variety of federal, state and local laws and regulations relating to the discharge of materials into the environment or otherwise relative to the protection of the environment. From time to time, we use a small amount of hazardous materials in our operations. We believe that we comply with all applicable environmental laws and regulations.

Government Regulations on the Business.

Domestic Regulation. We currently develop, manufacture and sell several medical products, the marketing of which is subject to governmental regulation in the United States. Medical devices are regulated in the United States by the Food and Drug Administration, or FDA, and, in some cases, by certain state agencies. The FDA regulates the research, testing, manufacture, safety, effectiveness, labeling, promotion and distribution of medical devices in the United States. Generally, medical devices require clearance or approval prior to commercial distribution. Additionally, certain material changes to, and changes in intended use of, medical devices also are subject to FDA review and clearance or approval. Non-compliance with applicable requirements can result in failure of the FDA to grant pre-market clearance or approval, withdrawal or suspension of approval, suspension of production, or the imposition of various other penalties.

We notified the FDA of our intent to market our endoscopes, image couplers, beamsplitters, adapters and video ophthalmoscopes, and the FDA has determined that we may market such devices, subject to the general controls provisions of the Food, Drug and Cosmetic Act. We obtained this FDA permission without the need to undergo a lengthy and expensive approval process due to the FDA's determination that such devices meet the regulatory standard of being substantially equivalent to an existing approved device.

In the future, we plan to market additional endoscopes and related medical products that may require the FDA's permission to market such products. We may also develop additional products or seek to sell some of our current or future medical products in a manner that requires us to obtain the permission of the FDA to market such products, as well as the regulatory approval or license of other federal, state and local agencies or similar agencies in other countries. The FDA has authority to conduct detailed inspections of manufacturing plants in order to assure that "good manufacturing practices" are

7

---

Table of Contents

being followed in the manufacture of medical devices, to require periodic reporting of product defects to the FDA and to prohibit the sale of devices which do not comply with law.

Foreign Requirements. Sales of medical device products outside the United States are subject to foreign regulatory requirements that may vary from country to country. Our failure to comply with foreign regulatory requirements would jeopardize our ability to market our products in foreign jurisdictions. The regulatory environment in the European Union for medical device products differs from that in the United States. Medical devices sold in the European Economic Area must bear the CE mark. Devices are classified by manufacturers according to the risks they represent, with a classification of Class III representing the highest risk devices and Class I representing the lowest risk devices. Once a device has been classified, the manufacturer can follow one of a series of conformity assessment routes, typically through a registered quality system, and demonstrate compliance to a "European Notified Body." The CE mark may then be applied to the device. Maintenance of the system is ensured through annual on-site audits by the notified body and a post-market surveillance system requiring the manufacturer to submit serious complaints to the appropriate governmental authority. All of our medical products are CE mark certified.

ITEM 1A.    RISK FACTORS.

RISKS RELATED TO OUR BUSINESS

An investment in our common stock involves a high degree of risk. Before making an investment decision, you should give careful consideration to the following risk factors, in addition to the other information included in this annual report. If any of the following risks actually occur, our business, financial condition or results of operations could be materially and adversely affected and you may lose some or all of your investment.

Our independent auditors have issued a going concern opinion and, if we do not generate enough cash from operations to sustain our business, we may have to liquidate assets or curtail our operations.

The accompanying financial statements have been prepared assuming we will continue as a going concern. During the year ended June 30, 2010, we incurred net losses of $660,882 and during the year ended June 30, 2009, we incurred net losses of $992,135. Our auditors have issued a going concern qualification in their report related to our financial statements for the year ended June 30, 2010. This report is based on our history of operating losses, negative cash flows from operations and our cash position as of June 30, 2010.

Conditions exist which raise substantial doubt about our ability to continue as a going concern. Our ability to continue as a going concern depends on our ability to generate sufficient cash flows to meet our obligations on a timely basis, to obtain additional financing as may be required, and ultimately to attain profitable operations. However, we may not be able to obtain additional financing or achieve profitable operations or sufficient cash flows in the future.

Our existing and future debt obligations could impair our liquidity and financial condition.

Effective June 25, 2008, we completed a financing in which we issued 10% Senior Secured Convertible Notes and Warrants. As of June 30, 2010, we had outstanding notes payable of $600,000, with accrued interest as of June 30, 2010 of $120,833. Pursuant to agreements executed with holders of our 10% Senior Secured Convertible Notes, the holders of the Notes agreed to extend the stated maturity date of the Notes to October 15, 2010. While we believe the holders of the Notes will continue to work with us to reach a positive outcome on the repayment of the Notes, if we are not able to do so we may have to curtail our operations or liquidate our assets.

8

---

Table of Contents

We may need to incur additional debt in the future to fund all or part of our capital requirements. Our outstanding debt and future debt obligations could impair our liquidity and could:

•

make it more difficult for us to satisfy our other obligations;



•

require us to dedicate a substantial portion of any cash flow we may generate to payments on our debt obligations, which would reduce the availability of our cash flow to fund working capital, capital expenditures and other corporate requirements;



•

impede us from obtaining additional financing in the future for working capital, capital expenditures, acquisitions and general corporate purposes; and



•

make us more vulnerable in the event of a downturn in our business prospects and limit our flexibility to plan for, or react to, changes in our industry.

It is highly unlikely that we will be able to generate enough cash from our operations to pay our outstanding debt on the specified due date. If we were to fail in the future to make any required payment under agreements governing indebtedness, or equity issues, or fail to comply with the financial and operating covenants contained in those agreements, we would be in default in regards to that financing transaction. A debt default could significantly diminish the market value and marketability of our common stock. Our lenders would have the ability to require that we immediately pay all outstanding indebtedness, and we might not have sufficient assets to satisfy their demands. In this event, we may be forced to seek protection under bankruptcy laws, which could harm our future operations and overall financial condition.

The current worldwide economic downturn could have a negative impact on our business, operating results and financial condition.

If the economic downturn continues, our customers may delay, reduce or cancel their purchases of our products, particularly if they or their customers have difficulty obtaining credit, which could reduce our revenues. The economic downturn could increase competition which could have the effect of reducing our prices. We could incur losses if a customer's business fails and is unable to pay us, or pay us on a timely basis. Likewise, if our suppliers have difficulty in obtaining credit or in operating their businesses, they may not be able to provide us with the materials we use to manufacture our products. These actions could result in reduced revenues and higher operating costs, and have an adverse effect on our results of operations and financial condition.

We rely on a small number of customers who may not consistently purchase our products in the future and if we lose any one of these customers, our revenues may decline.

In the fiscal year ended June 30, 2010, our four largest customers represented approximately 33%, 19%, 17% and 11%, respectively, of our total revenues. In the fiscal year ended June 30, 2009, our four largest customers represented approximately 22%, 20%, 23% and 11%, respectively, of our total revenues. No other customer accounted for more than 10% of our revenues during those periods. At June 30, 2010, receivables from our three largest customers were 39%, 23% and 15%, respectively, of the total accounts receivable.

In the future, a small number of customers may continue to represent a significant portion of our total revenues in any given period. These customers may not consistently purchase our products at a particular rate over any subsequent period. A loss of any of these customers could adversely affect our revenues.

9

---

Table of Contents

Negative economic conditions increase the risk that we could suffer unrecoverable losses on our customers' accounts receivable which would adversely affect our financial results.

At June 30, 2010, receivables from our three largest customers were 39%, 23% and 15%, respectively, of the total accounts receivable. While we believe we have a varied customer base and have experienced strong collections in the past, if current economic conditions fail to improve we may experience change in our customer base, including reductions in their purchasing commitments to us, which could also have a material adverse effect on our revenues and liquidity. We have not purchased insurance on our accounts receivable balances.

We rely heavily upon the talents of our Chief Executive Officer and Chief Scientific Officer, the loss of whom could severely damage our business.

Our performance depends to a large extent on a small number of key scientific, technical, managerial and marketing personnel. In particular, we believe our success is highly dependent upon the services and reputation of our Chief Executive Officer, Mr. Richard E. Forkey. The loss of Mr. Forkey's services could severely damage our business.

Additionally, Dr. Joseph N. Forkey, our Executive Vice President and Chief Scientific Officer, provides highly valuable contributions to our capabilities in optical instrument development, in management of new technology and in potentially significant longer-term initiatives in biophysics and biomedical instrumentation. The loss of Dr. Forkey's management and scientific contributions could severely damage our business.

We must continue to be able to attract employees with the scientific and technical skills that our business requires and if we are unable to attract and retain such individuals, our business could be severely damaged.

Our ability to attract employees with a high degree of scientific and technical talent is crucial to the success of our business. There is intense competition for the services of such persons, and we cannot guarantee that we will be able to attract and retain individuals possessing the necessary qualifications. If we cannot attract such individuals, we may not be able to produce our products and our business could be damaged.

We are subject to a high degree of regulatory oversight and, if we do not continue to receive the necessary regulatory approvals, our revenues may decline.

The FDA has allowed us to market the medical products we currently sell in the United States. However, prior FDA approval may be required before we can market additional medical products that we may develop in the future. We may also seek to sell current or future medical products in a manner that requires us to obtain FDA permission to market such products. We may also require the regulatory approval or license of other federal, state or local agencies or comparable agencies in other countries.

We may not continue to receive the FDA's permission to market our current products or may not obtain the necessary regulatory permission, approvals or licenses for the marketing of any of our future products. Also, we cannot predict the impact on our business of FDA regulations or determinations arising from future legislation or administrative action. If we lose the FDA's permission to market our current products or we do not obtain regulatory permission to market our future products, our revenues may decline and our business may be harmed.

10

---

Table of Contents

We face risks inherent in product development and production under fixed price purchase orders and these purchase orders may not be profitable over time.

A portion of our business has been devoted to research, development and production under fixed price purchase orders. For our purposes, a fixed price purchase order is any purchase order under which we will provide products or services for a fixed price over an extended period of time, usually six months or longer. Fixed price purchase orders represented approximately 25% to 50% of our total revenues during the last several years. We expect that revenues from fixed price purchase orders will continue to represent a significant portion of our total revenues in future fiscal years.

Because they involve performance over time, we cannot predict with certainty the expenses involved in meeting our obligations under fixed price purchase orders. Therefore, we can never be sure at the time we enter into any single fixed price purchase order that such purchase order will be profitable for us.

Third parties may infringe on our patents and as a result, we could incur significant expense in protecting our patents or not have sufficient resources to protect them.

We hold a number of patents that are important to our business. Although we are not currently aware of any past or present infringements of our patents, we plan to protect these patents from infringement and obtain additional patents whenever feasible. To this end, we have obtained confidentiality agreements from our employees and consultants and others who have access to the design of our products and other proprietary information. Protecting and obtaining patents, however, is both time consuming and expensive. We therefore may not have the resources necessary to assert all potential patent infringement claims or pursue all patents that might be available to us. If our competitors or other third parties infringe on our patents, our business may be harmed.

Third parties may claim that we have infringed on their patents and as a result, we could be prohibited from using all or part of any technology used in our products.

Should third parties claim a proprietary right to all or part of any technology that we use in our products, such a claim, regardless of its merit, could involve us in costly litigation. If successful, such a claim could also result in us being unable to freely use the technology that was the subject of the claim, or sell products embodying such technology. If we engage in litigation, our expenses may increase and our business may be harmed. If we are prohibited from using a particular technology in our products, our revenues may decline and our business may be harmed.

We depend on the availability of certain key supplies and services that are available from only a few sources and if we experience difficulty with a supplier, we may have difficulty finding alternative sources of these supplies or services.

We require certain key supplies for our products, particularly precision grade optical glass, that are available from only a few sources, each of which is located outside the United States. Also, outside vendors grind and polish certain of our lenses and other optical components, such as prisms and windows. Based upon our ordering experience to date, we believe the materials and services required for the production of our products are currently available in sufficient quantities. Our requirements are small relative to the total supply, and we are not currently encountering problems with availability. However, this does not mean that we will continue to have timely access to adequate supplies of essential materials and services in the future or that supplies of these materials and services will be available on satisfactory terms when the need arises. Our business could be severely damaged if we become unable to procure essential materials and services in adequate quantities and at acceptable prices.

From time to time, subcontractors may produce certain of our products for us, and our business is subject to the risk that these subcontractors fail to make timely delivery. Our products and services are

11

---

Table of Contents

also from time to time used as components of the products and services of other manufacturers. We are therefore subject to the risk that manufacturers that integrate our products or services into their own products or services are unable to acquire essential supplies and services from third parties in a timely fashion. If this occurs, we may not be able to deliver our products on a timely basis and our revenues may decline.

Our customers may claim that the products we sold them were defective and if our insurance is not sufficient to cover a claim, we would be liable for the excess.

Like any manufacturer, we are and always have been exposed to liability claims resulting from the use of our products. We maintain product liability insurance to cover us in the event of liability claims, and as of September 21, 2010, no such claims have been asserted or threatened against us. However, our insurance may not be sufficient to cover all possible future product liabilities.

We would be liable if our business operations harmed the environment and a failure to maintain compliance with environmental laws could severely damage our business.

Our operations are subject to a variety of federal, state and local laws and regulations relating to the protection of the environment. From time to time, we use hazardous materials in our operations. Although we believe that we are in compliance with all applicable environmental laws and regulations, our business could be severely damaged by any failure to maintain such compliance.

Our quarterly financial results vary quarter to quarter and depend on factors which may adversely affect our stock price. As a result, we cannot predict with a high degree of certainty our operating results in any particular fiscal quarter.

Our quarterly operating results may vary significantly depending upon factors such as:

•

the timing of completion of significant orders;



•

the timing and amount of our research and development expenditures;



•

the costs of initial product production in connection with new products;



•

the timing of new product introductions—both by us and by our competitors;



•

the timing and level of market acceptance of new products or enhanced versions of our existing products;



•

our ability to retain existing customers and customers' continued demand for our products and services;



•

our customers' inventory levels, and levels of demand for our customers' products and services; and



•

competitive pricing pressures.

We may not be able to grow or sustain revenues or achieve or maintain profitability on a quarterly or annual basis and levels of revenue and/or profitability may vary from one such period to another.

We have a number of large, well-financed competitors who have research and marketing capabilities that are superior to ours.

The industries in which we compete are highly competitive. Many of our existing and potential competitors have greater financial resources and manufacturing capabilities, more established and larger marketing and sales organizations and larger technical staffs than we have. Other companies, some with greater experience in the telecommunications, optics, semiconductor or medical products industries, are seeking to produce products and services that compete with our products and services.

12

---

Table of Contents

RISKS RELATED TO OUR STOCK

Trading in our common stock is limited and the price of our common stock may be subject to substantial volatility.

Our common stock was delisted from the NASDAQ Capital Market at the opening of business on December 27, 2005, and is now traded on the Over-The-Counter Bulletin Board, or OTCBB, under the ticker symbol "PEYE.OB," where we expect our common stock to remain for the foreseeable future. Broker-dealers often decline to trade in OTCBB stocks given the market for such securities is often limited, the stocks are more volatile and the risk to investors is greater. These factors may reduce the potential market for our common stock by reducing the number of potential investors. This may make it more difficult for investors in our common stock to sell shares to third parties or to otherwise dispose of their shares. This could cause our stock price to decline.

Additionally, the price of our common stock may be volatile as a result of a number of factors, including, but not limited to, the following:

•

our ability to successfully conceive and to develop new products and services to enhance the performance characteristics and methods of manufacture of existing products;



•

our ability to retain existing customers and customers' continued demand for our products and services;



•

the timing of our research and development expenditures and of new product introductions;



•

the timing and level of acceptance of new products or enhanced versions of our existing products; and



•

price and volume fluctuations in the stock market at large which do not relate to our operating performance.

"Penny stock" rules may make buying or selling our securities difficult which may make our stock less liquid and make it harder for investors to buy and sell our securities.

Trading in our securities is subject to the SEC's "penny stock" rules and it is anticipated that trading in our securities will continue to be subject to the penny stock rules for the foreseeable future. The SEC has adopted regulations that generally define a penny stock to be any equity security that has a market price of less than $5.00 per share, subject to certain exceptions. These rules require that any broker-dealer who recommends our securities to persons other than prior customers and accredited investors must, prior to the sale, make a special written suitability determination for the purchaser and receive the purchaser's written agreement to execute the transaction. Unless an exception is available, the regulations require the delivery, prior to any transaction involving a penny stock, of a disclosure schedule explaining the penny stock market and the risks associated with trading in the penny stock market. In addition, broker-dealers must disclose commissions payable to both the broker- dealer and the registered representative and current quotations for the securities they offer. The additional burdens imposed upon broker-dealers by these requirements may discourage broker-dealers from recommending transactions in our securities, which could severely limit the liquidity of our securities and consequently adversely affect the market price for our securities.

We are contractually obligated to issue shares in the future, diluting your interest in us.

As of June 30, 2010, there were approximately 94,378 shares of our common stock issuable upon exercise of stock options outstanding, at a weighted average exercise price of $15.98 per share. An additional 134,698 shares of our common stock are reserved for issuance under our 2006 Equity Incentive Plan as of June 30, 2010. Also outstanding as of June 30, 2010 are warrants for the issuance of an additional 898,621 shares of our common stock, at a weighted average exercise price of $4.18 per

13

---

Table of Contents

share. The foregoing information gives effect to a 1 for 25 reverse stock split effective December 11, 2008. Moreover, we expect to issue additional shares and options to purchase shares of our common stock to compensate employees, consultants and directors, and we may issue additional shares to raise capital. Any such issuances will have the effect of further diluting the interest of the holders of our securities.

ITEM 2.    PROPERTIES.

We conduct our domestic operations at two facilities in Gardner, Massachusetts. The main Gardner facility is leased from a corporation owned by an individual who is one of our officers and serves on our board of directors. The lease terminated in December 1999 and we are currently a tenant-at-will. We rent the other Gardner facility on a month-to-month basis. We rent office space in Hong Kong for sales, marketing and supplier quality control and liaison activities of our Hong Kong subsidiary.

We believe these facilities are adequate for our current operations and adequately covered by insurance. Significant increases in production or the addition of significant equipment additions or manufacturing capabilities in connection with the production of our line of endoscopes and other products may, however, require the acquisition or lease of additional facilities. We may establish production facilities domestically or overseas to produce key assemblies or components, such as lenses, for our products. Overseas facilities may subject us to the political and economic risks associated with overseas operations. The loss of or inability to establish or maintain such additional domestic or overseas facilities could materially adversely affect our competitive position and profitability.

ITEM 3.    LEGAL PROCEEDINGS.

We may be involved from time to time in ordinary litigation, negotiation and settlement matters that will not have a material effect on our operations or finances. We are not aware of any pending or threatened litigation against us or our officers and directors in their capacity as such that could have a material impact on our operations or finances.

ITEM 4.    (REMOVED AND RESERVED).

PART II

ITEM 5.    MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

Market Information

Our common stock is quoted on the Over-The-Counter Bulletin Board, or OTCBB, under the symbol "PEYE.OB." The following table sets forth the high and low bid prices for our common stock for each quarter during the last two fiscal years as quoted on the OTCBB. Such OTCBB market quotations reflect inter- dealer prices, without retail markup, markdown or commissions and may not necessarily

14

---

Table of Contents

represent actual transactions. All prices have been adjusted to reflect a 1 for 25 reverse stock split, effective December 11, 2008.

Holders

As of September 15, 2010, we had approximately 100 holders of record of our common stock. Holders of record include nominees who may hold shares on behalf of multiple owners.

Dividends

We have not declared any dividends during the last two fiscal years. At present, we intend to retain our earnings, if any, to finance research and development and expansion of our business.

Recent Sales of Unregistered Securities; Use of Proceeds from Registered Securities

None.

ITEM 6.    SELECTED FINANCIAL DATA.

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

ITEM 7.    MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Important Factors Regarding Forward-Looking Statements

This annual report on Form 10-K contains forward-looking statements that involve risks and uncertainties. All statements other than statements of historical facts included in this Annual Report on Form 10-K regarding our financial performance, business strategy and plans and objectives of management for future operations and any other future events are forward-looking statements and based on our beliefs and assumptions. Words such as "may," "will," "expect," "might," "believe," "anticipate," "intend," "could," "estimate," "project," "plan," and other similar words are one way to identify such forward-looking statements. Such statements reflect our current view with respect to future events and are subject to certain risks, uncertainties, and assumptions, including, but without limitation, those risks and uncertainties contained in the Risk Factors section of this Annual Report on Form 10-K. You should not place undue reliance on these forward-looking statements. Our actual results could differ materially from those anticipated in the forward-looking statements for many reasons, including the risks described in this report and other reports we file with the Securities and Exchange Commission. Although we believe the expectations reflected in the forward-looking statements are reasonable, they relate only to events as of the date on which the statements are made.

15

---

Table of Contents

We do not intend to update any of the forward-looking statements after the date of this Annual Report to conform these statements to actual results or to changes in our expectations, except as required by law.

The following discussion and analysis should be read in conjunction with the Financial Statements and Notes thereto, and other financial information included elsewhere in this annual report on Form 10-K.

Overview

We have been a developer and manufacturer of advanced optical instruments since 1982. We design and produce high-quality micro-optics, medical instruments and other advanced optical systems. Our medical instrumentation line includes laparoscopes, arthroscopes and endocouplers and a world-class product line of 3-D endoscopes for use in minimally invasive surgical procedures.

We are currently developing specialty instruments incorporating our Lenslock™ technology (patent pending) that ensures lower cost, easier reparability and enhanced durability as compared to other design approaches used in the industry. We are also aggressively pursuing ultra-small instruments, some with lenses less than 1 mm in diameter, utilizing micro-precision™ lens technology (patent pending).

We are registered to the ISO 9001:2008, ISO 13485:2003, and Canadian Medical Devices Conformity Assessment System, or CMDCAS, Quality Standards and comply with the FDA Good Manufacturing Practices and the European Union Medical Device Directive for CE marking of our medical products. Our internet website is www.poci.com. Information on our website is not intended to be integrated into this report.

The areas in which we do business are highly competitive and include both foreign and domestic competitors. Many of our competitors are larger and have substantially greater resources than we do. Furthermore, other domestic or foreign companies, some with greater financial resources than we have, may seek to produce products or services that compete with ours. We routinely outsource specialized production efforts as required, both domestic and offshore, to obtain the most cost effective production. Over the years, we have achieved extensive experience with other optical specialists worldwide.

Since the 1990s, we have maintained a Hong Kong subsidiary to support business and quality control activities as required throughout Asia. We believe that the cost savings from such production is essential to our ability to compete on a price basis in the medical products area particularly and to our profitability in general.

We believe that competition for sales of our medical products and services, which have been principally sold to original equipment manufacturer, or OEM, customers, is based on performance and other technical features, as well as other factors, such as scheduling and reliability, in addition to competitive price.

We believe that our future success depends to a large degree on our ability to continue to conceive and to develop new optical products and services to enhance the performance characteristics and methods of manufacture of existing products. Accordingly, we expect to continue to seek to obtain product-related design and development contracts with customers and to invest our own funds on research and development, to the extent funds are available.

Critical Accounting Policies and Estimates

General

Management's discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America, referred to as U.S. GAAP. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the

16

---

Table of Contents

reported amounts of assets, liabilities, revenues and expenses. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

Revenue Recognition

We recognize revenue when four basic criteria are met: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred or services rendered; (3) the price to the buyer is fixed or determinable; and (4) collectability is reasonably assured. Determination of criteria (3) and (4) is based on management's judgments regarding the fixed nature of the price to the buyer charged for products delivered or services rendered and collectability of the sales price. We assess credit worthiness of customers based upon prior history with the customer and assessment of financial condition. Our shipping terms are customarily Free On Board, or FOB, shipping point.

Bad Debt

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. Allowances for doubtful accounts are established based upon review of specific account balances and historical experience. If the financial condition of our customers was to deteriorate, resulting in an impairment of their ability to make future payments, additional allowances may be required.

Inventories

We provide for estimated obsolescence on unmarketable inventory based upon assumptions about future demand and market conditions. If actual demand and market conditions are less favorable than those projected by management, additional inventory write-downs may be required. Inventory, once written down, is not subsequently written back up, as these adjustments are considered permanent adjustments to the carrying value of the inventory.

Impairment of Long-Lived Assets and Long-Lived Assets to be Disposed of

Long-lived assets and certain identifiable intangibles are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to undiscounted future net cash flows expected to be generated by the asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower of the carrying amount or fair value less estimated costs to sell.

Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carry forwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

17

---

Table of Contents

In assessing the likelihood of utilization of existing deferred tax assets, management has considered historical results of operations and the current operating environment.

Stock-Based Compensation

The measurement and recognition of all compensation costs for all stock based awards made to employees and the Board of Directors is based upon fair value over the requisite service period for awards expected to vest.

We estimate the fair value of stock-based awards on the date of grant using the Black-Scholes option-pricing model.

Results of Operations for the Fiscal Year Ended June 30, 2010 Compared to the Fiscal Year Ended June 30, 2009

During the latter part of fiscal year 2008, we implemented plans to reduce costs, including workforce reductions, and to streamline operations in an effort to reduce net losses. This has resulted in an increase in gross profit and simultaneous decreases in operating expenses, thereby reducing losses, beginning in the third and fourth quarters of fiscal year 2008 and continuing through fiscal year 2010. We anticipate continuing measures taken to contain costs, and to continue our review of other expense areas to determine where additional reductions in discretionary spending can be achieved.

Total revenues for fiscal year 2010 were $3,094,437, a decrease of $434,073, or 12.3%, from fiscal year 2009 revenues of $3,528,510. The decrease in revenues was due to lower unit volume sales of couplers, optical components, endoscopes and fiber scopes utilizing our micro-precision™ lens and prism technology, partially offset by higher unit volume sales of an advanced surgical visualization system. The reduction in unit volume sales was partially offset by increases in average product prices totaling approximately $50,000. The increase in our product pricing is the result of several factors including product redesigns and improvements, reengineering of our products to meet customer specifications, changes in prices from vendors and the application of volume pricing based on order size of specific products. Because we design the majority of our products based on customer specification, our products sold year-to-year vary in cost and complexity which affects our pricing.

Revenues from our largest customers, as a percentage of total revenues, were as follows:

No other customer accounted for more than 10% of our revenues in fiscal years 2010 and 2009.

Gross profit for fiscal year 2010 of $1,297,238 reflected an unfavorable change of $298,436, compared to fiscal year 2009 gross profit of $1,595,674. Gross profit as a percentage of revenues decreased from 45.2% in fiscal year 2009 to 41.9% in fiscal year 2010. The unfavorable change in our gross profit percentage was due primarily to lower overall sales volume and higher provisions for slow-moving and obsolete inventories in fiscal year 2010 compared to fiscal year 2009.

Research and development expenses, net were $529,406 for fiscal year 2010 compared to $737,791 for fiscal year 2009. The decrease of $208,385, or 28.2%, was due primarily to higher reimbursements of related costs from customers, which increased by $193,179, or 106.7%, in fiscal year 2010 compared to

18

---

Table of Contents

fiscal year 2009. Research and development expenses depend on our assessment of new product opportunities and available resources. Research and development expenses were net of reimbursement of related costs of $374,284 during fiscal year 2010 and $181,105 during fiscal year 2009.

Selling, general and administrative expenses decreased by $256,470, or 17.7%, to $1,192,800 for fiscal year 2010 compared to $1,449,270 for fiscal year 2009. The decrease was primarily attributable to lower legal, accounting, and transfer agent fees amounting to approximately $102,000 related to the preparation and filing of a registration statement and implementation of a 1-for-25 reverse stock split in December 2008, and lower insurance and stock option compensation expenses.

The gain on sale of assets in fiscal year 2010 represents the sale of previously written off assets for proceeds of $20,826.

Interest income decreased by $4,311 during fiscal year 2010 compared to the previous year. The decrease was due to a lower base of cash and cash equivalents.

Interest expense decreased by $197,071 during fiscal year 2010 to $256,729 compared to the previous year total of $453,800. The decrease was due primarily to lower amortization of debt discount on the 10% Senior Secured Convertible Notes issued on June 25, 2008.

The income tax provisions in fiscal years 2010 and 2009 represent the minimum statutory state income tax liability.

Liquidity and Capital Resources

We compete in a highly technical, very competitive, and in most cases, price driven segment of the medical instrument marketplace where products can take years to develop and introduce to distributors and end users. Furthermore, research and development, manufacturing, marketing and distribution activities are strictly regulated by the FDA, ISO and other regulatory bodies that, while intended to enhance the ultimate quality and functionality of products produced, can contribute to the significant cost and time needed to maintain existing products and develop and introduce product enhancements and new product innovations.

We have traditionally funded working capital needs through product sales, management of working capital components of our business, and by cash received from public and private offerings of our common stock, warrants to purchase shares of our common stock and convertible notes. We have incurred quarter to quarter operating losses during our efforts to develop current products including endoscopes, image couplers, beamsplitters, night vision and micro-optic lenses, prisms and assemblies for various applications utilizing a number of proprietary and patent-pending technologies including Lenslock™ endoscope and micro-precision™ lens technologies. Our management expects that such operating losses will continue until sales increase to breakeven and profitable levels. Our management also believes that the opportunities represented by these products have the potential to generate sales increases to achieve breakeven and profitable results.

Our current financial condition may raise doubt among potential equity investors, customers and suppliers regarding our ability to continue as a going concern, as referenced by the Report of Independent Registered Public Accounting Firm on our financial statements for the year ended June 30, 2010, included in this annual report. We may not be able to obtain working capital funds necessary in the time frame needed and at satisfactory terms to correct the going concern issue.

As of June 30, 2010, cash and cash equivalents were $416,040, accounts receivable were $505,200 and current liabilities were $2,092,948. We anticipate that deferred officers' salaries and director consulting expenses accrued at June 30, 2010 will be settled by issuing restricted common stock rather than by cash payments. These deferred amounts included in current liabilities at June 30, 2010 total approximately $574,000. We believe that the introduction of several new products during the last four

19

---

Table of Contents

fiscal years, along with new and on-going customer relationships, will continue to generate additional revenues, which are required in order for us to achieve profitability. If these additional revenues are not achieved on a timely basis, we will be required and are prepared to implement further cost reduction measures, as necessary.

Capital equipment expenditures during fiscal year 2010 were $3,334, compared to $0 for fiscal year 2009. Future capital equipment expenditures will be dependent upon future sales and success of on-going research and development efforts.

Contractual cash commitments for the fiscal years subsequent to June 30, 2010 are summarized as follows:

---

(1)

This amount may be reduced to the extent the holders of the Senior Secured Convertible Notes elect to convert the principal on the Notes into our common stock.

We have contractual cash commitments related to open purchase orders for fiscal year 2011 of approximately $78,000.

Trends and Uncertainties That May Affect Future Results

We expect our pattern of quarter-to-quarter revenue fluctuations to continue, due to the introductory stage of many of our products and the unpredictable timing of orders from customers and the size of those orders in relation to total revenues. Contingent on available funding, we intend to continue to develop and commercialize new products and technical innovations, in particular:

•

a new generation of endoscopes that incorporate Lenslock™ technology (patent pending);



•

new components and instruments utilizing our new micro-precision™ lens technology (patent pending) for optical components and endoscopes under 1 mm;



•

new custom medical products; and



•

new night vision lenses.

However, if we do not have sufficient capital to develop and commercialize these products, our future revenues may decline if we cannot offer the innovative products the market is seeking. Over the past few years, we have implemented significant changes in new product and technology development by shifting the emphasis of research and development efforts from developing underlying technologies to commercialization of the applications of these new technologies. These have already been realized to some degree in a number of areas. Over the past two to three years our efforts have produced revenues from our new micro-precision™ lens products and new Lenslock™ endoscopes. Recent initiatives in the area of micro-precision™ lenses address specific customer opportunities in different medical specialty applications. In endoscope technologies, we continue new product offerings in our Lenslock™ product line. We have shipped over 600 ENT endoscopes with diameter of 2.7 mm that incorporate Lenslock™ technology. We recently completed prototypes of our 4 mm Lenslock™ sinuscope, and 5 mm Lenslock™ laproscope, and are actively pursuing development of our new 4 mm Lenslock™ wide field arthroscope. We believe that our Lenslock™ technology has advantages over competitive products due to ease of manufacture and repair, superior image quality, significant cost

20

---

Table of Contents

effectiveness and quality of repair. We anticipate that further incorporating this technology into our endoscope product line will lead to increased sales.

The $600,000 principal and $120,883 interest, as of June 30, 2010, on the 10% Senior Secured Convertible Notes are due October 15, 2010. This amount may be reduced to the extent the holders of the Notes elect to convert some or all of the principal on the Notes into our common stock. Should the holders not elect to convert all or a substantial amount of the balances due on the Notes into our common stock, it is highly unlikely that we will be able to generate enough cash from our operations to pay these balances in full on the specified due date. Therefore, we may renegotiate terms with existing holders or refinance this debt and, in either case, if available, the terms may be more burdensome. We are currently exploring the possibility of obtaining additional funding sources to satisfy this repayment obligation.

In the event the holders do not elect to convert all or a substantial amount of the balances due on the Notes into our common stock, or if we are not able to renegotiate the terms or obtain financing on terms satisfactory to us, or at all, we may ultimately be unable to meet our payment obligations under the Notes. In such event, all unpaid principal and interest will become immediately due and payable and the holders may pursue any other available remedies. The Notes are secured by a pledge of our assets pursuant to a pledge and security agreement and the security documents ancillary thereto, and in the event we are unable to meet our payment obligations, the holders would have the ability to require that we immediately pay all outstanding indebtedness, and we might not have sufficient assets to satisfy their demands. While we believe that this eventuality is unlikely, it is possible that in this event, we may be forced to seek protection under bankruptcy laws, which could harm our future operations and overall financial condition. Additionally, a debt default could significantly diminish the market value and marketability of our common stock.

During the last two quarters of 2008 and continuing through fiscal year 2010, we implemented certain cost containment plans which included focusing on a limited number of products and technologies expected to provide near term revenues, streamlining operations, workforce reductions and deferring certain development initiatives. These measures reduced our overhead expenses.

Going forward, we intend to focus our development efforts on products we believe offer the best prospects to increase our near-term revenues. An example beyond the new instruments mentioned above includes the lenses we developed for a new color Night Vision system. During the quarter ended December 31, 2009, we shipped first article pre-production lens systems. These are for use in the new color Night Vision system, and utilize an improved design that offers lower cost and lighter weight.

For the quarter ended June 30, 2010, our cash and cash equivalents increased by $105,798, and our operating profit for the quarter was $9,659, the first positive quarterly operating profit since the quarter ended December 31, 1997. For the year ended June 30, 2010, our cash and cash equivalents increased by $31,447 compared to the year ended June 30, 2009. If our cash reserves decrease in the future, we will be required to seek additional funding for operations. We predict that we may not have sufficient cash to continue operations through the next twelve months. We are actively pursuing several options to manage cash flow and raise capital including issuing debt, equity or entering into a strategic alliance. The sale of additional equity or convertible debt securities would result in additional dilution to our stockholders, and debt financing, if available, may involve restrictive covenants that could restrict our operations or finances. Financing may not be available in amounts or on terms acceptable to us, if at all. If we cannot raise funds on acceptable terms or achieve positive cash flow, we may not be able to continue to conduct operations, develop new products, grow market share, take advantage of future opportunities or respond to competitive pressures or unanticipated requirements, any of which would negatively impact our business, operating results and financial condition. If we are not successful in increasing our revenues, reducing our expenses or raising additional equity capital to generate sufficient

21

---

Table of Contents

cash flows to meet our obligations as they come due, we may not be able to continue as a going concern.

ITEM 7A.    QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

As a Smaller Reporting Company as defined by Rule 12b-2 of the Exchange Act and in Item 10(f)(1) of Regulation S-K, we are electing scaled disclosure reporting obligations and therefore are not required to provide the information requested by this Item.

ITEM 8.    FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.

22

---

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of
Precision Optics Corporation, Inc.:

We have audited the accompanying consolidated balance sheets of Precision Optics Corporation, Inc. and subsidiaries (the Company) as of June 30, 2010 and 2009 and the related consolidated statements of operations, stockholders' equity and cash flows for the years then ended. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal controls over financial reporting. An audit includes consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of Precision Optics Corporation, Inc. and subsidiaries as of June 30, 2010 and 2009 and the results of their operations and their cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1 to the consolidated financial statements, the Company has suffered recurring net losses and negative cash flows from operations, which raises substantial doubt about its ability to continue as a going concern. Management's plans concerning these matters are described in Note 1. The accompanying consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

/s/ Stowe & Degon LLC

Westborough, Massachusetts
September 15, 2010

23

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES
Consolidated Balance Sheets at June 30, 2010 and 2009

The accompanying notes are an integral part of these consolidated financial statements.

24

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES
Consolidated Statements of Operations for the
Years Ended June 30, 2010 and 2009

The accompanying notes are an integral part of these consolidated financial statements.

25

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES
Consolidated Statements of Stockholders' Equity
for the Years Ended June 30, 2010 and 2009

The accompanying notes are an integral part of these consolidated financial statements.

26

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES
Consolidated Statements of Cash Flows for the
Years Ended June 30, 2010 and 2009

The accompanying notes are an integral part of these consolidated financial statements.

27

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(1)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

(a)   Nature of Business and Liquidity

Precision Optics Corporation, Inc. (the "Company") designs, develops, manufactures and sells specialized optical systems and components and optical thin-film coatings. The Company conducts business in one industry segment only and its customers are primarily domestic. The Company's products and services fall into two principal areas: (i) medical products for use by hospitals and physicians; and (ii) advanced optical system design and development services and products used by industrial customers.

The Company has sustained recurring net losses for several years. During the year ended June 30, 2010, the Company incurred a net loss of $660,882 and generated cash from operations of $52,283. As of June 30, 2010, cash and cash equivalents were $416,040, accounts receivable were $505,200 current liabilities were $2,092,948. The Company anticipates that deferred officers' salaries and director consulting expenses accrued at June 30, 2010 will be settled by issuing restricted common stock rather than by cash payments. These deferred amounts included in current liabilities at June 30, 2010 total approximately $574,000. These factors raise substantial doubt about the Company's ability to continue as a going concern. The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern, which contemplates the realization of assets and the satisfaction of liabilities in the normal course of business. The financial statements do not include any adjustments relating to the recoverability and classification of recorded asset amounts or the amounts and classification of liabilities that might be necessary should the Company be unable to continue as a going concern. During the latter part of fiscal year 2008, the Company implemented plans to reduce costs and to streamline operations in an effort to reduce net losses. The Company believes that the recent introduction of several new products, along with new and on-going customer relationships, will generate additional revenues, which are required in order for the Company to achieve profitability. If these additional revenues are not achieved on a timely basis, the Company will be required and is prepared to implement further cost reduction measures, as necessary.

The Company has incurred quarter to quarter operating losses during its recent efforts to develop current products including endoscopes, image couplers, beamsplitters, night vision and micro-optic lenses, prisms and assemblies for various applications and utilizing a number of proprietary and patent-pending technologies including Lenslock™ endoscope and micro-precision™ lens technologies. Management expects that such operating losses will continue through fiscal year 2011, and until sales increase to breakeven and profitable levels. Management also believes that the opportunities represented by these products have the potential to generate sales increases to achieve breakeven and profitable results. The Company will continue its review of other expense areas to determine where additional reductions in discretionary spending can be achieved. There can be no assurance that the Company's operating plans will be successful, and if so required, that the Company will be successful in obtaining the capital necessary to continue ongoing operations.

In June 2008, the Company issued senior secured convertible notes and warrants, raising cash proceeds of $600,000.

During the past year, the introduction of several new products, along with new and on-going customer relationships, has resulted in significant revenue growth. The Company believes that with continued promotion, these opportunities have the potential to continue the general trend of increasing revenues, which, along with enhanced operations are required in order for the Company to achieve profitability.

28

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(b)   Principles of Consolidation

The accompanying consolidated financial statements include the accounts of the Company and its two wholly owned subsidiaries. All inter-company accounts and transactions have been eliminated in consolidation. All shares and per share data reflect the effects of a 1-for-25 reverse stock split that became effective on December 11, 2008.

(c)   Revenues

The Company recognizes revenue when four basic criteria are met: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred or services rendered; (3) the price to the buyer is fixed and determinable; and (4) collectability is reasonably assured. The Company's shipping terms are customarily FOB shipping point.

The sales price of products and services sold is fixed and determinable after receipt and acceptance of a customer's purchase order or properly executed sales contract, typically before any work is performed. Management reviews each customer purchase order or sales contract to determine that the work to be performed is specified and there are no unusual terms and conditions that would raise questions as to whether the sales price is fixed or determinable. The Company assesses credit worthiness of customers based upon prior history with the customer and assessment of financial condition. Accounts receivable are stated at the amount management expects to collect from outstanding balances. An allowance for doubtful accounts is provided for that portion of accounts receivable considered to be uncollectible, based upon historical experience and management's evaluation of outstanding accounts receivable at the end of the year. Bad debts are written off against the allowance when identified.

The Company's revenue transactions typically do not contain multiple deliverable elements for future performance obligations to customers, other than a standard one-year warranty on materials and workmanship, the estimated costs for which are provided for at the time revenue is recognized.

Revenues for industrial and medical products sold in the normal course of business are recognized upon shipment when delivery terms are FOB shipping point and all other revenue recognition criteria have been met. Gross shipping charges reimbursable from customers, to deliver product, are insignificant and are included in Revenues, while shipping costs are classified as the Selling, General and Administrative Expenses section of the Consolidated Statement of Operations.

(d)   Cash and Cash Equivalents

The Company includes in cash equivalents all highly liquid investments with original maturities of three months or less at the time of acquisition. Cash and cash equivalents of $416,040 and $384,593 at June 30, 2010 and 2009, respectively, consist primarily of cash at banks and money market funds. The Company maintains its cash and cash equivalents in bank deposit accounts that, at times, may exceed federally insured limits. The Company has not experienced any losses in such accounts. The Company believes it is not exposed to any significant credit risk on cash and cash equivalents.

29

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(e)   Inventories

Inventories are stated at the lower of cost (first-in, first-out) or market and include material, labor and manufacturing overhead. The components of inventories at June 30, 2010 and 2009 are as follows:

The Company provides for estimated obsolescence on unmarketable inventory based upon assumptions about future demand and market conditions. If actual demand and market conditions are less favorable than those projected by management, additional inventory write-downs may be required. Inventory, once written down, is not subsequently written back up, as these adjustments are considered permanent adjustments to the carrying value of the inventory.

During fiscal years 2010 and 2009, the Company recorded pre-tax non-cash provisions for slow-moving and obsolete inventories of $80,087 and $45,419, respectively.

(f)    Property and Equipment

Property and equipment are recorded at cost. Maintenance and repair items are expensed as incurred. The Company provides for depreciation and amortization by charges to operations, using the straight-line and declining-balance methods, which allocate the cost of property and equipment over the following estimated useful lives:

Depreciation expense was $45,607 and $33,737 for the years ended June 30, 2010 and 2009, respectively.

(g)   Significant Customers and Concentration of Credit Risk

Financial instruments that subject the Company to credit risk consist primarily of cash equivalents and trade accounts receivable. The Company places its investments with highly rated financial institutions. The Company has not experienced any losses on these investments to date. At June 30, 2010, receivables from the Company's largest customers were 38%, 23% and 15% of the total accounts receivable. At June 30, 2009, receivables from the Company's largest customers were 32%, 21%, 19% and 13% of the total accounts receivable. No other customer accounted for more than 10% of the Company's receivables as of June 30, 2010 and 2009. The Company has not experienced any material losses related to accounts receivable from individual customers. The Company generally does not require collateral or other security as a condition of sale rather relying on credit approval, balance limitation and monitoring procedures to control credit risk of trade account financial instruments.

30

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

Management believes that allowances for doubtful accounts, which are established based upon review of specific account balances and historical experience, are adequate.

Revenues from the Company's largest customers, as a percentage of total revenues, were as follows:

No other customer accounted for more than 10% of the Company's revenues in fiscal years 2010 and 2009.

(h)   Loss per Share

Basic loss per share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the period. For each of the two years in the periods ended June 30, 2010 and 2009, the effect of stock options and warrants was anti-dilutive; therefore, they were not included in the computation of diluted loss per share. The number of shares issuable upon the exercise of outstanding stock options and warrants that were excluded from the computation, as their effect would be anti-dilutive, was approximately 993,000 and 992,000 during fiscal 2010 and 2009, respectively.

(i)    Stock-Based Compensation

The measurement and recognition of all compensation costs for all stock-based awards made to employees and the Board of Directors based upon fair value over the requisite service period for awards expected to vest. The Company estimates the fair value of share-based awards on the date of grant using an the Black-Scholes option-pricing model. Stock-based compensation costs recognized for the year ended June 30, 2010 and 2009 amounted to $72,347 and $108,242, respectively.

(j)    Foreign Currency Translation

The Company translates certain accounts and financial statements of its foreign subsidiary. The functional currency of the Company's foreign subsidiary is the United States dollar. Transaction gains or losses are reflected in the accompanying consolidated statements of operations and have not been significant.

(k)   Patents

Patents are carried at cost, less accumulated amortization of $684,952 and $651,520 at June 30, 2010 and 2009, respectively. Such costs amortized using the straight-line method over the shorter of their legal or estimated useful lives, generally five to ten years. Amortization expense was $33,432 and $28,458 for the years ended June 30, 2010 and 2009, respectively. Amortization expense is expected to be approximately $33,000, $32,000, $32,000, $32,000 and $29,000, respectively, for the years ending June 30, 2011 through June 30, 2015, respectively.

31

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(l)    Fair Value of Financial Instruments

Financial instruments consist principally of cash equivalents, accounts receivable, accounts payable, and accrued expenses. The estimated fair value of these financial instruments approximates their carrying value due to the short-term nature of these financial instruments.

(m)  Long-Lived Assets

Long-lived assets and certain identifiable intangibles are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to future undiscounted net cash flows expected to be generated by the asset. If such assets are considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the assets exceeds the fair value of the assets. Assets to be disposed of are reported at the lower of the carrying amount or fair value less costs to sell.

(n)   Warranty Costs

The Company does not incur future performance obligations in the normal course of business other than providing a standard one-year warranty on materials and workmanship to its customers. The Company provides for estimated warranty costs at the time product revenue is recognized. Warranty costs have been included as a component of cost of goods sold in the accompanying consolidated statements of operations. The following tables summarize warranty reserve activity for the years ended June 30, 2010 and 2009:

(o)   Research and Development

Research and development expenses are charged to operations as incurred. The Company groups development and prototype costs and related reimbursements in research and development. For the years ended June 30, 2010 and 2009, research and development expense is shown net of reimbursements of $374,284 and $181,105, respectively, in the accompanying statements of operations.

(p)   Comprehensive Income

Comprehensive income is defined as the change in equity of a business enterprise during a period from transactions and other events and circumstances from non-owners sources. The Company's comprehensive loss for the years ended June 30, 2010 and 2009 was equal to its net loss for the same periods.

(q)   Income Taxes

Income taxes are accounted for under the asset and liability method. Deferred tax assets and liabilities are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating

32

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

loss and tax credit carry-forwards. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. In assessing the likelihood of utilization of existing deferred tax assets, management has considered historical results of operations and the current operating environment.

(r)   Segment Reporting

Operating segments are identified as components of an enterprise about which separate discrete financial information is available for evaluation by the chief operating decision maker, or decision-making group, in making decisions about how to allocate resources and assess performance. The Company's chief decision-maker is its Chief Executive Officer. To date, the Company has viewed its operations and manages its business as principally one segment. For all periods presented, over 90% of the Company's sales have been to customers in the United States.

(s)   Use of Estimates

The preparation of financial statements in conformity with accounting standards generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

(t)    Recent Accounting Pronouncements

In July 2010, the Financial Accounting Standards Boards, or FASB issued new guidance under ASC Topic Receivables—Disclosures about the Credit Quality of Financing Receivables and the Allowance for Credit Losses" also known as ASU 2010-20. The guidance requires entities to provide disclosures designed to facilitate financial statement users' evaluation of (i) the nature of credit risk inherent in the entity's portfolio of financing receivables, (ii) how that risk is analyzed and assessed in arriving at the allowance for credit losses and (iii) the changes and reasons for those changes in the allowance for credit losses. Disclosures must be disaggregated by portfolio segment, the level at which an entity develops and documents a systematic method for determining its allowance for credit losses, and class of financing receivable, which is generally a disaggregation of portfolio segment. The required disclosures include, among other things, a roll forward of the allowance for credit losses as well as information about modified, impaired, non-accrual and past due loans and credit quality indicators. ASU 2010-20 will be effective for the Company's financial statements as of December 31, 2010, as it relates to disclosures required as of the end of a reporting period. Disclosures that relate to activity during a reporting period will be required for the Company's financial statements that include periods beginning on or after January 1, 2011. This guidance is not expected to have a material effect on the Company's consolidated financial position, results of operations or cash flows.

In February 2010, the FASB, issued Accounting Standards Update, or ASU, No. 2010-09, Amendments to Certain Recognition and Disclosure Requirements, as an amendment to FASB Accounting Standards Codification, or ASC, Topic 855, Subsequent Events. As a result of ASU No. 2010-09, SEC registrants are no longer required to disclose the date through which management evaluated subsequent events in the financial statements. ASU No. 2010-09 is effective March 31, 2010 for our consolidated financial statements. The adopted provisions of ASU No. 2010-09 are limited to disclosures and did not have any effect on the Company's consolidated financial position, results of operations or cash flows.

33

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

In January 2010, the FASB issued new guidance under ASC Topic 820 Fair Value Measurements and Disclosures, also known as ASU 2010-06, to improve disclosures about fair value measurements. The guidance requires entities to disclose separately the amounts of significant transfers in and out of Level 1 and Level 2 fair value measurements and describe the reasons for the same. It also requires Level 3 reconciliation to be presented on a gross basis disclosing purchases, sales, issuances and settlements separately. The guidance is effective for interim and annual financial periods beginning after December 15, 2009 except for gross basis presentation for Level 3 reconciliation, which is effective for interim and annual periods beginning after December 15, 2010. This guidance is not expected to have a material effect on the Company's consolidated financial position, results of operations or cash flows.

In October 2009, the FASB issued ASU No. 2009-13, "Revenue Recognition, Multiple-Deliverable Revenue Arrangements," an amendment to its accounting guidance on revenue arrangements with multiple deliverables. This new accounting guidance addresses the unit of accounting for arrangements involving multiple deliverables and how consideration should be allocated to separate units of accounting, when applicable. In the same month, the FASB also issued ASU No. 2009-14, "Software, Certain Revenue Arrangements That Include Software Elements," which changes revenue recognition for tangible products containing software and hardware elements. This update excludes from software revenue recognition all tangible products containing both software and non-software components that function together to deliver the product's essential functionality and includes such products in the multiple-deliverable revenue guidance discussed above. This guidance will be effective for fiscal years beginning on or after June 15, 2010. Early adoption is permitted. All guidance contained within these updates must be adopted in the same period. This guidance is not expected to have a material effect on the Company's consolidated financial position, results of operations or cash flows.

In June 2009, the FASB issued new guidance under ASC Topic 810 Consolidation, also known as ASU 2009-17 for guidance on the consolidation of variable interest entities. This amends the original guidance, to require an enterprise to perform an analysis to determine whether the enterprise's variable interest or interests give it a controlling financial interest in a variable interest entity ("VIE"). This analysis identifies the primary beneficiary of a VIE as the enterprise that has both (a) the power to direct the activities of a VIE that most significantly impact the entity's economic performance, and (b) the obligation to absorb losses of the entity that could potentially be significant to the VIE. Additionally, this new guidance requires an enterprise to assess whether it has an implicit financial responsibility to ensure that a VIE operates as designed when determining it has the power to direct the activities of the VIE that most significantly impact the entity's economic performance. This guidance is effective at the beginning of a reporting entity's first fiscal year that begins after November 15, 2009. This guidance is not expected to have a material effect on the Company's consolidated financial position, results of operations or cash flows.

In June 2009, the FASB issued new guidance under ASC Topic 860 Transfers and Servicing, also known as Accounting Standards Update ("ASU") 2009-16, for guidance on the transfer and servicing of financial assets. This guidance eliminates the concept of a "qualifying special-purpose entity" from the original accounting guidance and removes the exception from applying FASB guidance on consolidation of variable interest entities, to qualifying special-purpose entities. This guidance is effective at the beginning of a reporting entity's first fiscal year that begins after November 15, 2009. This guidance is not expected to have a material effect on the Company's consolidated financial position, results of operations or cash flows.

34

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(2)   10% SENIOR SECURED CONVERTIBLE NOTES

On June 25, 2008, the Company entered into a Purchase Agreement with institutional and other accredited investors (the "Investors") pursuant to which it sold a total of $600,000 of 10% Senior Secured Convertible Notes (the "Notes") that are convertible at the Investor's option into a total of 480,000 shares of the Company's common stock at a conversion rate of $1.25. The Company also issued warrants to purchase a total of 316,800 shares of its common stock at an exercise price of $1.75 per share (the "Warrants"). Interest accrues on the Notes at a rate of 10% per year and is payable in cash upon the earlier of conversion or maturity of the Notes. The original maturity of the Notes was June 25, 2010 and the Warrants expire on June 25, 2015, subject to extension. On September 15, 2010, by mutual agreement with the Company, the holders of the Notes extended the maturity date to October 15, 2010. The conversion price of the Notes and the exercise price of the Warrants may be adjusted downward in the event the Company issues shares of common stock or securities convertible into common stock at a price lower than the conversion price of the Notes or exercise price of the Warrants at the time of issuance.

Pursuant to the Purchase Agreement, the Notes and Warrants were not convertible or exercisable until the Company implemented a 1 for 6 reverse stock split, which required the approval of its stockholders. On November 25, 2008, the Company entered into a Side Letter Agreement in which the Investors agreed to change the ratio of the reverse split from 1 for 6 to 1 for 25. On December 11, 2008, the Company effected a 1 for 25 reverse split of its common stock.

Pursuant to a Registration Rights Agreement entered into with the Investors on June 25, 2008, the Company agreed to file a registration statement with the Securities and Exchange Commission by the earlier of (i) two days following the effectiveness of the amendment to implement a reverse stock split and (ii) December 15, 2008, to register the resale of the common stock issuable upon the conversion of the Notes and the exercise of the Warrants. The Company agreed to keep the registration statement effective until the earlier of (i) the date on which all the securities covered by the registration statement, as amended from time to time, have been sold and (ii) the date on which all the securities covered by such registration statement may be sold without restriction pursuant to Rule 144 of the Securities Act of 1933.

The Notes contain covenants binding on the Company and certain events of default, including but not limited, to:

•

the failure of the Company to make a scheduled payment;



•

the failure of the Company to make payments in excess of $100,000 on any liability or obligation, or if there is an acceleration of the stated maturity of any liability or obligation in excess of $100,000; or



•

the Company entering bankruptcy.

If an event of default occurs and is uncured within the allowable grace period, if any, the Investors may declare all amounts under the Notes immediately due and payable and may pursue any other available remedies.

35

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

The Notes consist of the following:

Upon issuance of the Notes and Warrants, the proceeds of $600,000 were allocated between the Notes and Warrants based on relative fair values. The value of the Warrants was recorded as a discount to the Notes, with a corresponding increase to additional paid-in capital. The fair value of the Warrants was determined using the Black-Scholes method, with the following assumptions:

In accordance with EITF 00-27, Application of EITF Issue No. 98-5, "Accounting for Convertible Securities with Beneficial Conversion Features or Contingently Adjustable Conversion Ratios," the proceeds from the issuance of the Notes were first allocated between the Notes and the Warrants. The value of the conversion feature was then calculated, which resulted in an effective conversion ratio that was less than the market price of the Company's common stock. The intrinsic value of this beneficial conversion feature was recorded as a further discount to the Notes, equal to the difference between the effective conversion ratio and the market price of the Company's common stock, with a corresponding increase to additional paid-in capital.

The following summarizes the discount on the Notes as of June 30:

(3)   COMMITMENTS

(a)   Related Party Transactions

The Company leases one of its facilities from a corporation owned by an officer-director-shareholder of the Company. The Company is currently a tenant-at-will, paying rent of $9,000 per month. Total rent expense paid to related parties was $108,000 in each of fiscal years 2010 and 2009, and is included in the accompanying consolidated statements of operations.

The Company paid or accrued fees to a director of $60,000 in each of fiscal years 2010 and 2009 for consulting services.

36

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements

(b)   Operating Lease Commitments

The Company has entered into operating leases for its office space and equipment that expire at various dates through fiscal year 2013. Total future minimum rental payments under all non-cancelable operating leases are $24,153 in fiscal 2011 and $1,164 thereafter.

Rent expense on operating leases, excluding the related party rent described above, was approximately $47,468 and $46,844 for the years ended June 30, 2010 and 2009, respectively.

(4)   STOCKHOLDERS' EQUITY

(a)   Stock Options

Stock-based compensation costs recognized for the year ended June 30, 2010 and 2009, included compensation costs for awards granted prior to, but not yet vested as of July 1, 2006 (adoption date), as well as any new grants issued after July 1, 2006. Total costs recognized during the year ended June 30, 2010 and 2009 amounted to $14,323 and $72,347, respectively, and were included in the accompanying consolidated statements of operations in: selling, general and administrative expenses (2010 – $1,619; 2009 – $55,340), cost of goods sold (2010 – $12,704; 2009 – $14,252), and research and development expenses, net (2010 – $0; 2009 – $2,755). No compensation has been capitalized because such amounts would have been immaterial. There was no net income tax benefit recognized related to such compensation for the years ended June 30, 2010 or 2009, as the Company is currently in a loss position. The total number of options granted during the year ended June 30, 2010 was 1,200.

As of June 30, 2010, the unrecognized compensation costs related to options vesting will be primarily recognized over a period of approximately 1 year:

The Company uses the Black-Scholes option-pricing model as the most appropriate method for determining the estimated fair value for the stock awards. The Black-Scholes method of valuation requires several assumptions: (1) the expected term of the stock award; (2) the expected future stock volatility over the expected term; and (3) risk-free interest rate. The expected term represents the expected period of time the Company believes the options will be outstanding based on historical information. Estimates of expected future stock price volatility are based on the historic volatility of the Company's common stock and the risk free interest rate is based on the U.S. Zero-Bond rate. The Company utilizes a forfeiture rate based on an analysis of the Company's actual experience. The fair value of options at date of grant was estimated with the following assumptions:

37

---

Table of Contents

PRECISION OPTICS CORPORATION, INC. AND SUBSIDIARIES

Notes to Consolidated Financial Statements