PRIVATE SECURITIES LITIGATION REFORM ACT

 

All statements other than statements of historical facts contained in this Annual Report on Form 10-K, including statements regarding our future financial position, business strategy and plans and objectives of management for future operations, are forward-looking statements. The words “anticipate,” “believe,” “should,” “estimate,” “will,” “may,” “future,” “plan,” “intend” and “expect” and similar expressions generally identify forward-looking statements. Although we believe our plans, intentions, assumptions and expectations reflected in the forward-looking statements are reasonable, we cannot be sure they will be achieved. Additionally, the duration and severity of the current coronavirus COVID-19 pandemic and its effect on our business operations, sales cycles, personnel, and the geographic markets in which we operate, and numerous other matters of national, regional and global scale, including those of a political, economic, business and competitive nature could cause our actual results to be materially different than those expressed in our forward looking statements. We caution that it is very difficult to predict the impact of known factors, it is impossible for us to anticipate all factors that could affect our actual results, and that actual results may differ materially and adversely from the forward-looking statements contained herein due to a number of factors, including but not limited to those factors set forth under the caption “Risk Factors” in Item 1A of this Annual Report and other filings with the Securities and Exchange Commission. These factors are not intended to represent a complete list of the general or specific factors that may affect us. It should be recognized that other factors, including general economic factors and business strategies, may be significant, presently or in the future. Except as required by law, we undertake no obligation to update any forward-looking statement, whether as a result of new information, future events or otherwise.

 

 

PART I

 

ITEM 1. BUSINESS

 

BIO-key International, Inc., a Delaware corporation (the “Company,” “BIO-key,” “we,” or “us), was founded in 1993 to develop and market advanced fingerprint biometric technology and related security software solutions. First incorporated as BBG Engineering, the company was renamed SAC Technologies in 1994 and renamed BIO-key International, Inc. in 2002.

 

We develop and market advanced fingerprint biometric identification and identity verification technologies, as well as related identity management and credentialing hardware and software solutions. We were pioneers in developing automated, finger identification technology that supplements or compliments other methods of identification and verification, such as personal inspection identification, passwords, tokens, smart cards, ID cards, PKI, credit card, passports, driver’s licenses, OTP or other form of possession or knowledge-based credentialing. Additionally, advanced BIO-key® technology has been, and is, used to improve both the accuracy and speed of competing finger-based biometrics.

 

We have developed what we believe is the most discriminating and effective commercially available finger-based biometric technology. Our primary market focus includes enterprise security, mobile payments and credentialing, healthcare records, and data security, among other things. Our secondary focus includes government markets, large scale identity projects such as voter’s registration, driver’s license, national ID programs, and SIM card registration.

 

 We market and sell through distributors and directly to end users via Amazon, our SideSwipe®, EcoID® and SideTouch® finger readers which can be used on any laptop, tablet or other device which contains a USB port.

 

We continue to develop advancements in our capabilities, as well as explore potential strategic relationships, including business combinations and acquisitions, which could help us leverage our capability to deliver our solutions. To drive revenue we rely upon our inside and outside sales teams, and continue to develop relationships with distributors, resellers, integrators, value added resellers (“VAR’s”), and technology partners. We’re building a growing network of partners with substantial experience in selling technology solutions to government and corporate customers in their respective markets.

 

In 2020,  we announced that we had secured two of the largest contracts in the Company’s history, with our partner Technology Transfer Institute (“TTI”). The contracts, valued at a combined $75M, are for large-scale identification projects in Africa and Nigeria. These historic opportunities are expected to showcase the Company’s ability to support large scale projects utilizing our core biometric authentication software engine, WEB-key®.

 

Impact of COVID-19

 

In March 2020, the World Health Organization declared the outbreak of COVID-19 as a global pandemic, and, in the following weeks, many U.S. states and localities issued lockdown orders impacting our operations. Since then, the COVID-19 situation within the U.S. has rapidly escalated.  The recent COVID-19 outbreak has caused us to migrate to a remote business model for our sales, marketing, administrative and executive teams.  Research and development and production are adjusting to the new landscape to maintain production as best as possible considering the conditions and regulations. We continue to monitor the situation closely and it is possible that we will implement further measures. Since we qualify as an essential business in New Jersey because we serve the healthcare industry, we have been able to access inventory to fulfill orders and ship products as required.  The pandemic has extended sales cycles and delayed deployments in most markets in which we operate, particularly in Africa which remains subject to shut-down and shelter at home orders.  We continue to conduct business daily and are  actively closing transactions throughout the current climate, with no changes to personnel.

 

Overview

 

BIO-key is a leader in finger-based biometric identification and personal identity verification, as well as authentication-transaction security. Stand-alone, or in partnerships with OEMs, integrators, and solution providers, we provide biometric security solutions to private and public sector customers. We help customers reduce risk by providing the ability to control access to online assets. Our solutions positively identify individuals before granting access to corporate resources, subscribed services, cloud services and other applications.

 

We also develop and distribute hardware components that are used in conjunction with our software and sell third-party hardware components with our software in various configurations required by our customers. Our products are interoperable with all major fingerprint reader and hardware manufacturers, enabling application developers, VAR’s, and channel partners to integrate our fingerprint biometrics into their applications, while dramatically reducing maintenance, upgrade and life-cycle costs. Our core technology supports interoperability on over 40 different commercially available fingerprint readers and is interoperable across Windows, Linux, and the Android mobile operating systems. This interoperability is unique in the industry, is a key differentiator for our products in the biometric market and, in our opinion, makes our technology more viable than competing technologies and expands the size of the overall market for our products.

 

 

2018 saw the emergence of a few trends as customers in financial services and manufacturing began reaching out to us to add a layer of biometric sign-in to their security infrastructure. Use cases included securing the online activity of roving users and shared workstations. Manufacturers turned to us to incorporate workflow efficiencies such as replacing eSignature processes with biometric tracking and reducing the use of long sophisticated passwords with biometric sign-in.

 

Late 2018, Lockheed Martin, a global government contractor, purchased SidePass and EcoID to secure employee access to the device and to leverage the biometric authentication capabilities of Windows Hello – Windows Hello for Business.

 

Along with organizations that sought out our solutions to address compliance requirements for multifactor authentication, emerged a new area of opportunity as state board of election organizations were funded to address key security concerns and biometric sign-in became a preferred solution.

 

In the second half of 2019, we modified our software licensing program to a software as a service (SaaS) model.  By migrating to a SaaS billing model, we open the door for more organizations to use our technology by lowering the cost of entry.  Although we expect to sacrifice some short-term revenue, the SaaS model is expected to generate more revenue than our former “perpetual billing method” which provided for an upfront payment for all licenses.

 

We approached CES 2019 as a critical proving ground for our TouchLock line of products. After expanding the product line and marketing the products on Shopify and Amazon, we targeted CES 2019 as a crossroad to either continue to market TouchLock, or to discontinue the products to focus on the core business. Upon returning from the event, our the executive team and our Board of Directors decided to exit the US consumer lock business.

 

In 2019, we entered into a sales incentive agreement with TTI to pursue market opportunities in the continent of Africa and  compete for large-scale ID products in Africa and the surrounding region.  The World Bank announced that it has dedicated $443M in funds to support government ID, voter ID, SIM Card registration programs throughout Africa and the surrounding countries. TTI has already secured $75M in contracts as of April, 2020.  The COVID-19 pandemic has delayed  the timing of the rollout of the programs.  We are continuing to  monitor the effects of the pandemic and expect that we may experience further delays.

 

In 2019, we won two significant international government law enforcement projects, one in Dubai and one in Singapore. Both organizations are using ID Director for Windows along with BIO-key fingerprint scanners to secure internal access to files and applications.

 

With the upcoming election, and security being a concern, during 2019 we emerged as the preferred biometric authentication solution for certain election offices in the Southeastern United states.  Within the past twelve (12) months, we have completed projects with eight (8) county election offices to secure internal access to the voter registration databases and additional state and county offices are evaluating our solutions. We anticipate the trend may continue to grow both in number of offices supported and in geographic coverage.

 

 

Banking remains a primary focus as we added several banks and credit unions to our financial services footprint.  During the first quarter of 2019, we published and distributed a case study highlighting First National Bank of Long Island.  Banks are finding ID Director for Windows and BIO-key scanners offer secure cost-effective multifactor authentication, protecting internal access to customer data.

 

The U.S. Senate became a BIO-key customer when they ordered our fingerprint scanners to secure access to laptops, computers, and tablets. Several offices within the White House have deployed our scanners as a way to secure the device and protect critical files and applications.

 

Products

 

Finger-based Biometric Identification and Personal Identity Verification

 

Our biometric identification technology improves both the accuracy and speed of authenticating or identifying individuals, by extracting unique landmarks and other characteristics from a fingerprint and comparing it to the landmarks from previously enrolled fingerprints to determine a match. The technology is built to be scalable and to handle databases containing millions of fingerprints. We achieve the highest levels of discrimination without requiring any other identifying data (multi-factor) such as a user ID, smart ID cards, or tokens, although our technology can be used in conjunction with such additional factors. Users of our technology have the option of on device or cloud authentication. This flexible authentication option in conjunction with our interoperable capabilities, is another key differentiator of our biometric identification solutions.

 

We support industry standards, such as SAML, FIDO, BioAPI, and have received National Institute of Standards and Technology independent laboratory certification of our ability to support Homeland Security Presidential Directive #12 (HSPD-12) and ANSI/INCITS-378 templates, as well as validation of our fingerprint match speed and accuracy in large database environments.

 

 

Our fingerprint identification algorithm, Vector Segment Technology (VST™), and WEB-key biometric service manager are the core intellectual property behind our full suite of biometric products that include:

 

●

ID Director™— is a suite of solutions for integration with CA Technologies / Broadcom’s Single Sign-on solution, Oracle’s Fusion Middleware SSO, IBM Tivoli Access Manager as well as ISAM and other solutions, utilizing the power and security of WEB-key. This solution provides a simple to implement, custom authentication scheme for companies looking to enhance authentication. ID Director is designed to add a level of security and convenience to the transaction level of any application. Versions of ID Director include:

 

●

ID Director for Windows provides enterprise customers the ability to implement and operate a biometric-centric multi-factor authentication (MFA) solutions with their Microsoft Active Directory and Azure Cloud platforms.

 

●

ID Director for SAML allows for simplified integration with many applications and identity and access management (IAM) platforms, without coding, including CA Technologies / Broadcom’s Single Sign-on, Oracle’s IDCS, IBM Tivoli Access Manager ESSO as well as Salesforce, SAP, and other SAML-enabled solutions, leveraging the power and security of WEB-key into a growing set of end user authentication scenarios. This solution provides a simple-to-implement, secure biometric authentication solution for companies looking to enhance authentication across many applications.

 

●

ID Director for EPIC adds BIO-key authentication to EPIC EHR environments, simplifying strong authentication for access, as well as meeting electronic prescribing regulations for authentication.

   

●

Vector Segment Technology SDK (VST)—Our biometric software development kit (“SDK”) provides developers with the ability to incorporate our biometric capabilities into their respective product offerings or infrastructure. VST is available as a low level SDK for incorporation into any application architecture to increase security while not sacrificing convenience. VST runs on Windows and Linux as well as within WEB-key on iOS and Android systems.

 

●

Intelligent Image Indexing®—Our biometric identification solution offers both large-scale one-to-many and one-to-one user identification. This solution enables customers to perform false alias and fast entry checks, including preventing fraudulent access to systems and privileges. Intelligent image indexing scales identification capabilities from thousands to millions of users. The solution runs on commercially available hardware making it scalable for any size system.

     

●

Biometric Service Provider—We provide support for the BioAPI (a standards-based solution meeting worldwide needs) for a compliant interface to applications using biometrics for verification and identification. We enhance the traditional use of BioAPI by adding 64-bit support and other advanced features, supporting identification calls and also providing a single user interface for multiple fingerprint readers.

       

We also offer a full line of easy to use finger scanners for both enterprise and consumer markets. Our SideSwipe, SideTouch and EcoID scanners are plug and play compatible with Microsoft Windows and our Q-180 Touch reader is a Micro USB compatible fingerprint reader for Android devices. The readers are currently sold in the Microsoft stores, as well as through their on-line channel, on Amazon, and through our website.

 

In 2015, Microsoft announced native support for biometrics in the Windows 8.1 and Windows 10 Operating platforms as well as Office 2016. With Microsoft Hello, any user can replace their PIN or password to access their device without any special software downloads by using our finger scanners, SideSwipe, SideTouch and EcoID, which are plug and play (PnP) compatible with the Microsoft platforms. We have been the preferred partner, in particular at the Microsoft “Ignite your Business” Windows 10 and Office 2016 launch events.

 

In 2018, we continued to invest and grow our relationship with Microsoft. The 2018 Ignite your Business event included Microsoft hosting an exclusive BIO-key demonstration kiosk within their event showcase.

 

In 2018, we also introduced OmniPass Consumer, a secure biometric-enabled application to manage multiple passwords for online apps, services or accounts.

 

 

Authentication Transaction Security

 

Our authentication-transaction security technology, WEB-key®, provides the ability to conduct identification and identity verification transactions in potentially unsecure environments, including the World Wide Web or in off-site cloud environments. 

 

WEB-key® makes cloud-based biometric user-authentication viable and eliminates technology constraints on online service providers, who are otherwise dependent on handset provider hardware and software platform decisions. It extends all features and functionalities of the VST algorithm to customers looking to add an enhanced level of security to their thin client and client/server applications. Both Windows and Linux operating systems currently support WEB-key®. Clients are available on Windows and Android operating systems. 

 

Intellectual Property Rights

 

We develop and own significant intellectual property and believe that our intellectual property is fundamental to our biometric operation:

 

Patents

 

We own patented technologies and trade secrets developed or acquired by us.

  

In May 2005, the U.S. Patent & Trademark Office issued patent 6,895,104 for our Vector Segment fingerprint technology (VST), our core biometric analysis and identification technology. With the payment of all maintenance fees, this patent will expire on March 4, 2023.

 

On October 3, 2006, we announced that our patent for a biometric authentication security framework had been granted by the U.S. Patent & Trademark Office. The patent No. 7,117,356 was issued to us for a biometric authentication security framework that enhances commercial and civil biometric use. Our authentication security framework protects privacy and security of cloud or network-based authentications while also facilitates ease of use of biometric systems. The technology that this patent is based on is the foundation for the authentication security incorporated in our WEB-key product line. WEB-key is a mature enterprise authentication solution that functions in a wide variety of application environments. The solution supports a variety of implementation alternatives including card technologies for “two-factor” authentication and also supports “single-factor” authentication. Partners and customers implementing our WEB-key software to provide convenient and secure user identity include a number of institutions including the Allscripts Healthcare Solutions, Computer Associates Site Minder, Oracle Access Manager and many other enterprise and solutions-based systems. With the payment of all maintenance fees, this patent will expire on May 20, 2023.

  

On December 26, 2006, we were issued US patent No. 7,155,040 covering our unique image processing technology, which is critical for enhancing information used in the extraction of biometric minutiae. The issued patent protects a critical part of an innovative four-phase image enhancement process developed by us. With the payment of all maintenance fees, this patent will expire on January 29, 2025.

 

On April 15, 2008, we were issued US patent No. 7,359,553 covering our image enhancement and data extraction core algorithm components. The solution protected under this patent provides the capability to quickly and accurately transform a fingerprint image into a computer image that can be analyzed to determine the critical data elements. With the payment of all maintenance fees, this patent will expire on January 3, 2025.

 

On August 19, 2008, we were issued US patent No. 7,415,605 for our “Biometric Identification Network Security” method. The solution protected under this patent provides a defense against hackers and system attacks, while leveraging the industry standard Trusted Platform Module (TPM) specification for encryption key management. With the payment of all maintenance fees, this patent will expire on May 20, 2023.

 

On November 18, 2008, we were issued US patent No. 7,454,624 for our “Match Template Protection within a Biometric Security System” method. The solution protected under this patent limits the scope of enrollment templates usage and also eliminates the need for revocation or encryption processes, which can be expensive and time consuming. With the payment of all maintenance fees, this patent will expire on May 17, 2025.

 

On March 10, 2009, we were issued US patent No. 7,502,938 for our “Trusted Biometric Device” which covers a simple, yet secure method of protecting a user’s biometric information. It covers the transmission of information from the point the information is collected at the biometric reader until the data reaches the computer or device that is authenticating the user’s identity. With the payment of all maintenance fees, this patent will expire on October 25, 2025.

 

 

On May 26, 2009, we were issued US patent No. 7,539,331 for our “Image Identification System” method for improving the performance and reliability of image analysis within an image identification system. With the payment of all maintenance fees, this patent will expire on March 22, 2022.

 

On November 8, 2011, we were issued US Patent No. 8,055,027 for our “Generation of Directional Information in the Context of Image Processing” method for image enhancement and processing. With the payment of all maintenance fees, this patent will expire on October 10, 2027.  

 

On July 3, 2012, we were issued US Patent No. 8,214,652 for our “Biometric Identification Network Security”, an expanded method of network and related network authentication security systems utilizing hardware-based support for encryption and key management for authentication purposes. With the payment of all maintenance fees, this patent will expire on April 24, 2024.

 

On May 3, 2017, we were issued US Patent No. 9,646,146 for our “Utilization of Biometric Data”, a method enables existing small area sensors to capture substantially more fingerprint surface area, leading to a higher degree of accuracy when performing a match. With the payment of all maintenance fees, this patent will expire on March 6, 2035.   

 

On June 19, 2018 we were issued U.S. Patent No. 10,002,244 for our “Utilization of Biometric Data” to allow continuous, passive user authentication on a mobile device.

 

On July 27, 2018 we were issued U.S. Patent No. 10,025,831 for “Adaptive Short Lists and Acceleration of Biometric Database Search”, a method to quickly and iteratively search a database of biometric data.

 

We have also been granted parallel patents to the US Patent portfolio to certain of our patents in many foreign countries offering protection of our intellectual property rights around the world.

 

Licensed Technology

 

In the fourth quarter of 2015, we entered into a license agreement with affiliates of CGG. The license agreement provides for the grant to our subsidiary, BIO-key Hong Kong Limited (“BIO-key Hong Kong”), of a perpetual, irrevocable, exclusive, worldwide, fully-paid license to all software and documentation regarding the software code, toolkit, electronic libraries and related technology currently known as or offered under the FingerQ name, together with perpetual license under all related patents held by the licensors and any other intellectual property rights owned by the licensors related to the forgoing software.  This portfolio includes 16 patents focused on, among other things, mobile payment systems and mobile payment methods based on biometric authentication as well finger print authentication systems and a finger print authentication method based on near field communication (“NFC”). The license agreement grants us the exclusive right to reproduce, create derivative works and distribute copies of the FingerQ software and documentation, create new FingerQ related products, and grant sublicenses of the licensed technology to end users. In addition, in the event the licensors make any derivatives or improvement in the FingerQ software or make any product or service that may compete with or which includes functionality similar to the FingerQ technology, they are required to license such derivative, improvement, product or service to us on the terms set forth in the license agreement at no additional charge. The license arrangement also allows us to create new, innovative solutions to address the growing demand for secure mobile transactions.  However, since we have not been able to generate the expected revenue from this agreement, we have written off the balance of the FingerQ resalable software license rights.

 

Trademarks

 

We have registered our trademarks “BIO-key”, “True User Identification”, “Intelligent Image Indexing”, “WEB-key”, “SideSwipe, “EcoID” and “The Biometric of Things” (application pending) with the U.S. Patent & Trademark Office, as well as many foreign countries, protecting our companies name and key technology offering names.

 

Copyrights and trade secrets

 

We take measures to ensure copyright and license protection for our software releases prior to distribution. When possible, the software is licensed in an attempt to ensure that only licensed and activated software functions to its full potential. We also take measures to protect the confidentiality of our trade secrets.

 

 

Markets

 

Identity Management, User Authentication, Privilege Entitlement and Access Control

 

Our products simplify the authentication process for enterprise users and consumers, while raising security to the highest levels of assurance. This allows our customers to meet new, stronger authentication requirements and security best practices across many industries, while delivering a superior end-user experience. Customers use our products to reduce risk of theft, fraud, loss, account takeover attacks, and unauthorized account sharing by limiting access to valuable assets, privileges, data, services, networks and places to only authorized individuals. Our products provide stronger identity binding and a superior user experience versus traditional credentialing systems, which utilize a physical or knowledge-based electronic credential to authenticate the holder, but fail to authenticate the actual user in addition to the token. Nearly every enterprise and public sector has seen a shift in the requirement for stronger authentication, and both NIST and industry thought leaders such as Microsoft have encouraged entities to enhance their security posture by implementing stronger 2-factor (2FA) or multi-factor authentication (MFA). Our products help organizations to meet their strong authentication goals, with a sign in process that end users prefer. In our opinion, the market for advanced user authentication, including fingerprint biometrics, extends to nearly every industry segment. We believe the market opportunity for our products is massive, global and growing. 

 

Historically, our largest market has been access control within highly regulated industries like government and healthcare. However, we are witnessing a change in the landscape as organizations within all industries and of all sizes are embracing biometric technology as a security and workflow solution. Championed by the millions of users that have been successfully introduced to biometrics by companies such as Apple and Samsung, today’s users have witnessed the security and convenience benefits of biometric technology.

 

Upon introducing a series of compact fingerprint readers, we saw an immediate increase in inquiries from both large commercial companies seeking an alternative to passwords, and from consumers recognizing that they could use SideSwipe or EcoID to replace their Windows password.

 

In October 2015, we established BIO-key Hong Kong for purposes of establishing relationships and conducting business is the Asia Pacific Region. Through our Hong Kong subsidiary, we support the growing demand for secure identification and authentication in the region.

 

We believe there is potential for significant market growth in the following key areas:

 

	●	Corporate network access control, corporate campuses, computer networks, and applications.
	●	Large scale identification projects, especially in Africa and the surrounding regions.
	●	Government funded initiatives, including with the state board of elections.
	●	International law enforcement use case applications as prospects see us as a global leader in the biometric technology space as witnessed by our agreement with the Israeli Defense Force, and the Singapore and Dubai Police departments.
	●	Consumer mobile credentialing, including mobile payments, credit and payment card programs, data and application access, and commercial loyalty programs.
	●	Demand for BIO-key hardware products from Windows 10 users and Fortune 500 companies.
	●	Government services and highly regulated industries including, Medicare, Medicaid, Social Security, Drivers Licenses, Campus and School ID, Passports/Visas.
	●	Continued growth in the Asia Pacific region.
	●	New remote authentication challenges – which our solutions are ideally suited to address.
	●	New opportunity to market our remote security solutions, spurred on because of the COVID-19 outbreak.

 

 

Business Model

 

Our business model for 2020 and beyond is focused on the following key areas:

 

Market Drivers

The current climate of broad enterprise adoption of MFA to replace passwords, an ongoing upgrade cycle of Microsoft Windows 10, and accompanying moves to Windows Hello for Business, all present broad opportunities for our products to leverage our unique differentiators and exploit the gaps left in existing technology approach.   There are gaps in the existing IAM solution space that provide the opportunity for us to demonstrate the unique business value of our solutions. One of those gaps is the challenge of authenticating users that “rove” among workstations. A second gap is preventing unauthorized account sharing. These gaps represent soft entry points to gain market share by highlighting known shortcomings of the status quo IAM approach.

 

OEM Customers

We will continue to prioritize securing agreements with OEM customers. The history of success supporting NCR, Omnicell, and LexisNexis provides an established footprint that we intend to build upon. As OEM customers embed our solutions within their products, the customer benefits from the enhanced security and workflow. OEM customers ordering patterns are more predictable and OEM customers generally require lower service and support resourcing. In 2019, we continued to meet with potential partners, constantly seeking that ideal synergistic partner relationship.

 

Highly Regulated Industries

Government ID projects and Healthcare organizations, including hospitals, clinics, and small private practices present a strong opportunity for BIO-key. In healthcare, we anticipate that patient identification will emerge as a highly regulated requirement for all healthcare organizations and we are developing our software to accommodate this need. Additionally, the financial services footprint of banking and credit union customers has grown substantially.

   

Partner Model

In 2019, we took major steps to upgrade our partner program. We hired dedicated resources and announced the launch of a new incentive laden Channel Alliance Partner program (CAP). The new CAP program provides VAR’s, Integrators, and Resellers with pricing and promotional incentives. The result to date has been the addition of 20+ new partners and we are  committed to growing this program aggressively in 2020.

  

Microsoft Partnership

We remain a Microsoft Partner and our line of compact fingerprint scanners have been tested and qualified by Microsoft to support Windows Hello and Windows Hello for Business. We continue to attend Microsoft’s premier IT event, Ignite your Business, which has become a source for generating leads.

 

Hardware

Hardware products generated 40% of the Company’s revenue in 2019. EcoID has emerged as our most popular scanner for enterprise deployments. For customers that require the highest level of security, PIV-Pro is a FIPS complaint fingerprint scanner, suitable for highly regulated industries and organizations that want a best-in-class solution.

 

Research and Development

 

Our biometric platform is mature, stable, and widely-deployed and we concentrate our research and development efforts on enhancing the functionality, reliability and integration of our current products as well as developing new and innovative products and solutions for providing broader access to the BIO-key user experience, such as ID Director for Windows and ID Director for SAML. Although we believe that our identification technology is one of the most advanced and discriminating fingerprint technologies available today, the markets in which we compete are characterized by rapid technological change and evolving standards. In order to maintain our position in the market, we will need to continue to upgrade and refine our existing technologies as new standards become relevant to our customers and markets.

 

We have also licensed mobile platform software from CGG which we have integrated with our core WEB-key offerings and introduced to the Asian markets in 2016. During the years ended December 31, 2019 and 2018, we spent $1,331,667 and $1,415,401, respectively, on research and development.

 

Moving forward, much of our R&D focus will remain on updating and advancing our core software products including WEB-key and VST. These products are critical to support the anticipated growth in large-scale ID projects.

 

Competition

 

In addition to companies that provide existing commonplace methods of restricting access to facilities and logical access points such as pass cards, PIN numbers, passwords, locks and keys, there are numerous companies involved in the development, manufacturing and marketing of fingerprint biometrics products to commercial, government, law enforcement and prison markets. These companies include, but are not limited to, 3M (Cogent), NEC, and MorphoTrak.

 

The majority of sales for automated fingerprint identification products in the market to date have been deployed for government agencies, healthcare facilities, and law enforcement applications. The consumer and commercial markets represent areas of significant growth potential for biometrics, led by the use of mobile devices.

 

The epidemic of security and data breaches reported over the past few years is one of the driving factors for identifying new methods of protecting valuable data. After attempting to create a more sophisticated password or more efficient token or PIN, it has become apparent that each of these methods are easily compromised, and the downside risks are significant.

 

We have also seen “keys” disrupt the market, led by Yubico’s YubiKey a USB key that stores and protects the user’s passwords. Keys do not offer the security benefits of biometric technology as they can be easily lost or stolen and replacement costs / managing the product becomes a growing expense.

 

 

With respect to competing biometrics technologies, each has its strengths and weaknesses and none has emerged as a market leader:

 

●

Fingerprint identification is generally viewed as very accurate, inexpensive and non-intrusive and is the dominant biometric in use today and will be for the foreseeable future;

 

●

Palm Vein scanning is expensive, technique-sensitive, and offers mobility challenges;

 

●

Iris scanning is viewed as accurate, but the hardware is significantly more expensive; and

 

●

Facial recognition can have accuracy limitations and is typically highly dependent on ambient lighting conditions, angle of view, and other factors.

 

Government Regulations

 

We are not currently subject to direct regulation by any government agency, other than regulations generally applicable to businesses or related to specific project requirements. In the event of any international sales, we would be subject to various domestic and foreign laws regulating such exports and export activities.

 

Environmental Regulations

 

As of the date of this report, we have not incurred any material expenses relating to our compliance with federal, state, or local environmental laws and do not expect to incur any material expenses in the foreseeable future.

   

Employees, Contractors, and Consultants

 

As of May 11, 2020, we employed fifteen individuals on a full-time basis as follows: (i) six in engineering, customer support, research and development; (ii) three in finance and administration; and (iii) six in sales and marketing. We also use the services of three consultants (part-time) who provide engineering and technical services. Additionally, our Hong Kong subsidiary employs two individuals on a full-time basis as follows: (i) one in research and development, and (ii) one in finance and administration. We also use the services of two factory contractors (full-time) in China.

 

 

ITEM 1A. RISK FACTORS

 

Set forth below are the risks that we believe are material to our investors. This section contains forward-looking statements. You should refer to the explanation of the qualifications and limitations on forward-looking statements appearing just before the section captioned “Business” in Item 1. above.

  

Business and Financial Risks 

 

Based on our lack of sufficient revenue since inception and recurring losses from operations, our independent registered public accounting firm has included an explanatory paragraph in their opinion as to the substantial doubt about our ability to continue as a going concern.

 

Due to, among other factors, our history of losses and limited revenue, our independent registered public accounting firm has included an explanatory paragraph in their opinion for the year ended December 31, 2019 as to the substantial doubt about our ability to continue as a going concern. Our financial statements have been prepared in accordance with accounting principles generally accepted in the United States, which contemplate that we will continue to operate as a going concern. Our financial statements do not contain any adjustments that might result if we are unable to continue as a going concern.

 

Since our formation, we have historically not generated significant revenue and have sustained substantial operating losses.

 

As of December 31, 2019, we had an accumulated deficit of approximately $90 million. In order to increase revenue, we have developed a direct sales force and anticipate the need to retain additional sales, marketing and technical support personnel and may need to incur substantial expenses. We cannot assure you that we will be able to secure these necessary resources, that a significant market for our technologies will develop, or that we will be able to achieve our targeted revenue. If we are unable to achieve revenue or raise capital sufficient to cover our ongoing operating expenses, we will be required to scale back operations, including marketing and research initiatives, or in the extreme case, discontinue operations.

 

Our biometric technology has yet to gain widespread market acceptance and we do not know how large of a market will develop for our technology.

 

Biometric technology has received only limited market acceptance, particularly in the private sector. Our technology represents a novel security solution and we have not yet generated significant sales. Although recent security concerns relating to identification of individuals and appearance of biometric readers on popular consumer products, including the Apple iPhone, have increased interest in biometrics generally, it remains an undeveloped, evolving market. Biometric based solutions compete with more traditional security methods including keys, cards, personal identification numbers and security personnel. Acceptance of biometrics as an alternative to such traditional methods depends upon a number of factors including:

 

●

national or international events which may affect the need for or interest in biometric solutions;

 

●

the performance and reliability of biometric solutions;

 

●

marketing efforts and publicity regarding these solutions;

 

●

public perception regarding privacy concerns;

 

●

costs involved in adopting and integrating biometric solutions;

 

●

proposed or enacted legislation related to privacy of information; and

 

●

competition from non-biometric technologies that provide more affordable, but less robust, authentication (such as tokens and smart cards).

 

For these reasons, we are uncertain whether our biometric technology will gain widespread acceptance in any commercial markets or that demand will be sufficient to create a market large enough to produce significant revenue or earnings. Our future success depends, in part, upon business customers adopting biometrics generally, and our solution specifically.

 

Biometric technology is a new approach to Internet security, which must be accepted in order for our WEB-key solution to generate significant revenue.

 

Our WEB-key authentication initiative represents a new approach to Internet security, which has been adopted on a limited basis by companies that distribute goods, content or software applications over the Internet. The implementation of our WEB-key solution requires the distribution and use of a finger scanning device and integration of database and server side software. Although we believe our solutions provide a higher level of security for information transmitted over the Internet than existing traditional methods, unless business and consumer markets embrace the use of a scanning device and believe the benefits of increased accuracy outweigh implementation costs, our solution will not gain market acceptance.

 

 

The market for our solutions is still developing and if the biometrics industry adopts standards or a platform different from our standards or platform, our competitive position would be negatively affected.

 

The market for identity solutions is still developing. The evolution of this market may result in the development of different technologies and industry standards that are not compatible with our current solutions, products or technologies. Several organizations set standards for biometrics to be used in identification and documentation. Although we believe that our biometric technologies comply with existing standards, these standards may change and any standards adopted could prove disadvantageous to or incompatible with our business model and current or future solutions, products and services.

 

Our software products may contain defects which will make it more difficult for us to establish and maintain customers.

 

Although we have completed the development of our core biometric technology, it has only been used by a limited number of business customers. Despite extensive testing during development, our software may contain undetected design faults and software errors, or “bugs” that are discovered only after it has been installed and used by a greater number of customers. Any such defect or error in new or existing software or applications could cause delays in delivering our technology or require design modifications. These could adversely affect our competitive position and cause us to lose potential customers or opportunities. Since our technologies are intended to be utilized to secure physical and electronic access, the effect of any such bugs or delays will likely have a detrimental impact on us. In addition, given that biometric technology generally, and our biometric technology specifically, has yet to gain widespread acceptance in the market, any delays would likely have a more detrimental impact on our business than if we were a more established company.  

 

In order to generate revenue from our biometric products, we are dependent upon independent original equipment manufacturers, system integrators and application developers, which we do not control. As a result, it may be more difficult to generate sales.

 

We market our technology through licensing arrangements with:

 

●

Original equipment manufacturers (OEMs), system integrators and application developers which develop and market products and applications which can then be sold to end users; and

 

●

Companies which distribute goods, services or software applications over the Internet.

 

As a technology licensing company, our success will depend upon the ability of these manufacturers and developers to effectively integrate our technology into products and services which they market and sell. We have no control over these licensees and cannot assure you that they have the financial, marketing or technical resources to successfully develop and distribute products or applications acceptable to end users or generate any meaningful revenue for us. These third parties may also offer the products of our competitors to end users. While we have commenced a significant sales and marketing effort, we have only begun to develop a significant distribution channel and may not have the resources or ability to sustain these efforts or generate any meaningful sales.

 

We face intense competition and may not have the financial and human resources necessary to keep up with rapid technological changes, which may result in our technology becoming obsolete.

 

The Internet, facility access control, and information security markets are subject to rapid technological change and intense competition. We compete with both established biometric companies and a significant number of startup enterprises as well as providers of more traditional methods of access control. Most of our competitors have substantially greater financial and marketing resources than we do and may independently develop superior technologies, which may result in our technology becoming less competitive or obsolete. We may not be able to keep pace with this change. If we are unable to develop new applications or enhance our existing technology in a timely manner in response to technological changes, we will be unable to compete in our chosen markets. In addition, if one or more other biometric technologies such as voice, face, iris, hand geometry or blood vessel recognition are widely adopted, it would significantly reduce the potential market for our fingerprint identification technology. 

 

We introduced our products in Asian markets in 2016 and expect material revenues from Africa beginning in 2020. Our financial performance will be subject to risks associated with changes in the value of the U.S. dollar versus local currencies.

 

Our primary exposure to movements in foreign currency exchange rates relates to non-U.S. dollar-denominated sales and operating expenses worldwide. Weakening of foreign currencies relative to the U.S. dollar will adversely affect the U.S. dollar value of our foreign currency-denominated sales and earnings, if any, and could lead to us raising international pricing, potentially reducing the demand for our products. In addition, margins on sales of our products in foreign countries and on sales of products that include components obtained from foreign suppliers could be materially adversely affected by foreign currency exchange rate fluctuations.

 

 

Although we have made significant sales of our products throughout Asia and Africa, we have not been able to consistently enforce our contract rights and collect all receivables which has resulted in material write-offs.  

 

In June 2015, we made a license sale in Africa for approximately $2.1 million, of which approximately $1.7 million remains unpaid. In December 2018, we made a license sale in Asia for approximately $1.1 million, of which approximately $0.5 million remains unpaid.  These amounts have been written off in full which has negatively impacted our financial position and results of operation.

 

Our ability to enforce our international contracts is contingent on our relationships with foreign resellers, and their financial viability. Although we are making efforts to better enforce our contract rights, there can be no assurance that we will be able to fully collect all receivables originating in Asia and Africa or that will not have to write-off future receivable which may be material in amount.   Any such write-offs will negatively impact our financial position and results of operation.

 

 

We depend on key employees and members of our management team, including our Chairman of the Board and Chief Executive Officer and our Chief Technology Officer, in order to achieve our goals. We cannot assure you that we will be able to retain or attract such persons.

 

Our employment contracts with Michael W. DePasquale, our Chairman of the Board and Chief Executive Officer, and Mira LaCous, our Chief Technology Officer, expire annually, and renew automatically for successive one year periods unless notice of non-renewal is provided by the Company. Although the contracts do not prevent them from resigning, they do contain confidentiality and non-compete clauses, which are intended to prevent them from working for a competitor within one year after leaving our Company. Our success depends on our ability to attract, train and retain employees with expertise in developing, marketing and selling software solutions. In order to successfully market our technology, we will need to retain additional engineering, technical support and marketing personnel. The market for such persons remains highly competitive and our limited financial resources will make it more difficult for us to recruit and retain qualified persons.

  

We cannot assure you that the intellectual property protection for our core technology provides a sustainable competitive advantage or barrier to entry against our competitors.

 

Our success and ability to compete is dependent in part upon proprietary rights to our technology. We rely primarily on a combination of patent, copyright and trademark laws, trade secrets and technical measures to protect our propriety rights. We have filed a patent application relating to both the optic technology and biometrics solution components of our technology wherein several claims have been allowed. The U.S. Patent and Trademark Office has issued us a series of patents for our Vector Segment fingerprint technology (VST), and our other core biometric analysis and identification technologies. However, we cannot assure you that we will be able to adequately protect our technology or other intellectual property from misappropriation in the U.S. and abroad. Any patent issued to us could be challenged, invalidated or circumvented or rights granted thereunder may not provide a competitive advantage to us. Furthermore, patent applications that we file may not result in issuance of a patent or, if a patent is issued, the patent may not be issued in a form that is advantageous to us. Despite our efforts to protect our intellectual property rights, others may independently develop similar products, duplicate our products or design around our patents and other rights. In addition, it is difficult to monitor compliance with, and enforce, our intellectual property rights on a worldwide basis in a cost-effective manner. In jurisdictions where foreign laws provide less intellectual property protection than afforded in the U.S. and abroad, our technology or other intellectual property may be compromised, and our business would be materially adversely affected. If any of our proprietary rights are misappropriated or we are forced to defend our intellectual property rights, we will have to incur substantial costs. Such litigation could result in substantial costs and diversion of our resources, including diverting the time and effort of our senior management, and could disrupt our business, as well as have a material adverse effect on our business, prospects, financial condition and results of operations. We can provide no assurance that we will have the financial resources to oppose any actual or threatened infringement by any third party. Furthermore, any patent or copyrights that we may be granted may be held by a court to infringe on the intellectual property rights of others and subject us to the payment of damage awards. 

 

We may be subject to claims with respect to the infringement of intellectual property rights of others, which could result in substantial costs and diversion of our financial and management resources.

 

Third parties may claim that we are infringing on their intellectual property rights. We may violate the rights of others without our knowledge. We may expose ourselves to additional liability if we agree to indemnify our customers against third party infringement claims. While we know of no basis for any claims of this type, the existence of and ownership of intellectual property can be difficult to verify and we have not made an exhaustive search of all patent filings. Additionally, most patent applications are kept confidential for twelve to eighteen months, or longer, and we would not be aware of potentially conflicting claims that they make. We may become subject to legal proceedings and claims from time to time relating to the intellectual property of others in the ordinary course of our business. If we are found to have violated the intellectual property rights of others, we may be enjoined from using such intellectual property, and we may incur licensing fees or be forced to develop alternative technology or obtain other licenses. In addition, we may incur substantial expenses in defending against these third party infringement claims and be diverted from devoting time to our business and operational issues, regardless of the merits of any such claim.

 

 

In addition, in the event that we recruit employees from other technology companies, including certain potential competitors, and these employees are engaged in the development of portions of products which are similar to the development in which they were involved at their former employers, we may become subject to claims that such employees have improperly used or disclosed trade secrets or other proprietary information. If any such claims were to arise in the future, litigation or other dispute resolution procedures might be necessary to retain our ability to offer our current and future services, which could result in substantial costs and diversion of our financial and management resources. Successful infringement or licensing claims against us may result in substantial monetary damages, which may materially disrupt the conduct of our business and have a material adverse effect on our reputation, business, financial condition and results of operations. Even if intellectual property claims brought against us are without merit, they could result in costly and time consuming litigation, and may divert our management and key personnel from operating our business.

 

If we are unable to effectively protect our intellectual property rights on a worldwide basis, we may not be successful in the international expansion of our business.

 

Access to worldwide markets depends in part on the strength of our intellectual property portfolio. There can be no assurance that, as our business expands into new areas, we will be able to independently develop the technology, software or know-how necessary to conduct our business or that we can do so without infringing the intellectual property rights of others. To the extent that we have to rely on licensed technology from others, there can be no assurance that we will be able to obtain licenses at all or on terms we consider reasonable. The lack of a necessary license could expose us to claims for damages and/or injunction from third parties, as well as claims for indemnification by our customers in instances where we have a contractual or other legal obligation to indemnify them against damages resulting from infringement claims. With regard to our own intellectual property, we actively enforce and protect our rights. However, there can be no assurance that our efforts will be adequate to prevent the misappropriation or improper use of our protected technology in international markets.

 

We face inherent product liability or other liability risks that could result in large claims against us. 

 

We have inherent risk of exposure to product liability and other liability claims resulting from the use of our products, especially to the extent customers may depend on our products in public safety situations that may involve physical harm or even death to individuals, as well as exposure to potential loss or damage to property. Despite quality control systems and inspection, there remains an ever-present risk of an accident resulting from a faulty manufacture or maintenance of products, or an act of an agent outside of our or our supplier’s control. Even if our products perform properly, we may become subject to claims and costly litigation due to the catastrophic nature of the potential injury and loss. A product liability claim, or other legal claims based on theories including personal injury or wrongful death, made against us could adversely affect operations and financial condition. Although we may have insurance to cover product liability claims, the amount of coverage may not be sufficient. 

 

We expect that we will need to obtain additional financing to execute our business plan over the long-term, which may not be available. If we are unable to raise additional capital or generate significant revenue, we may not be able to continue operations.

 

We have historically financed our operations through access to the capital markets by issuing secured and convertible debt securities, convertible preferred stock, common stock, and through factoring receivables. We currently require approximately $525,000 per month to conduct our operations, a monthly amount that we have been unable to consistently achieve through revenue generation. During 2019, we generated approximately $2,268,000 of revenue, which is below our average monthly requirements. If we are unable to generate sufficient revenue to cover operating expenses and fund our business plan, we will need to obtain additional third-party financing to (i) conduct the sales, marketing and technical support necessary to execute our plan to substantially grow operations, increase revenue and serve a significant customer base; and (ii) provide working capital. We may, therefore, need to obtain additional financing through the issuance of debt or equity securities. We cannot assure you that we will be able to secure any such additional financing on terms acceptable to us or at all. If we cannot obtain such financing, we will not be able to execute our business plan, will be required to reduce operating expenses, and in the extreme case, discontinue operations. 

 

We may not achieve sustainable profitability with respect to the biometric component of our business if we are unable to maintain, improve our offerings.

 

We believe that our future business prospects depend in part on our ability to maintain and improve our current services and to develop new ones on a timely basis. Our services will have to achieve market acceptance, maintain technological competitiveness, and meet an expanding range of customer requirements. As a result of the complexities inherent in our service offerings, major new wireless data services and service enhancements require long development and testing periods. We may experience difficulties that could delay or prevent the successful development, introduction or marketing of new services and service enhancements. Additionally, our new services and service enhancements may not achieve market acceptance. If we cannot effectively develop and improve services, we may not be able to recover our fixed costs or otherwise become profitable.

 

 

If we fail to adequately manage our resources, it could have a severe negative impact on our financial results or stock price.

 

We could be subject to fluctuations in technology spending by existing and potential customers. Accordingly, we will have to actively manage expenses in a rapidly changing economic environment. This could require reducing costs during economic downturns and selectively growing in periods of economic expansion. If we do not properly manage our resources in response to these conditions, our results of operations could be negatively impacted.

 

The recent outbreak of COVID-19 has and may continue to have a  negative impact on our business, sales, results of operations and financial condition.

 

The global outbreak of COVID-19 has led to severe disruptions in general economic activities, particularly retail operations and travel, as businesses and federal, state, and local governments take increasingly broad actions to mitigate this public health crisis. Individually and collectively, the consequences of the COVID-19 outbreak could have a material adverse effect on our business, sales, results of operations and financial condition.  Although our employees have been accustomed to working remotely prior to the COVID-19 pandemic, the uncertainty has extended sales cycles, extended payment terms, impacted access to inventory overseas, and delayed the start of planned deployments, particularly in the continent of Africa which remains subject to shut-down and shelter at home orders. 

 

Additionally, our liquidity could be negatively impacted if these conditions continue for a significant period of time and we may be required to pursue additional sources of financing to obtain working capital, maintain appropriate inventory levels, and meet our financial obligations. Currently capital and credit markets have been disrupted by the crisis and our ability to obtain any required financing is not guaranteed and largely dependent upon evolving market conditions and other factors. Depending on the continued impact of the crisis, further actions may be required.

 

The extent to which the COVID-19 outbreak ultimately impacts our business, sales, results of operations and financial condition will depend on future developments, which are highly uncertain and cannot be predicted, including, but not limited to, the duration and spread of the outbreak, its severity, the actions to contain the virus or treat its impact, and how quickly and to what extent normal economic and operating conditions can resume. Even after the COVID-19 outbreak has subsided, we may continue to experience significant impacts to our business as a result of its global economic impact, including any economic downturn or recession that has occurred or may occur in the future. 

 

We have taken measures to minimize the health risks of COVID-19 to our employees, as their safety and well-being are a top priority. Despite these efforts, there is a risk that one or more of our employees, including members of senior management, could contract COVID-19. Our U.S. employees are working remotely when possible, and we may experience reduced productivity due to the remote work environment. The extent to which COVID-19 impacts our business, sales and results of operations will depend on future developments, which are highly uncertain and cannot be predicted.

 

War, terrorism, other acts of violence or natural or manmade disasters such as a global pandemic may affect the markets in which the Company operates, the Company’s customers, the Company’s delivery of products and customer service, and could have a material adverse impact on our business, results of operations, or financial condition.

 

Our business may be adversely affected by instability, disruption or destruction in a geographic region in which we operate, regardless of cause, including war, terrorism, riot, civil insurrection or social unrest, and natural or manmade disasters, including famine, food, fire, earthquake, storm or pandemic events and spread of COVID-19, described above.

 

Such events may cause customers to suspend their decisions on using our products and services, make it difficult or impossible to access some of our inventory, and give rise to sudden significant changes in regional and global economic conditions and cycles that could interfere with purchases of goods or services. These events also pose significant risks to the our personnel and to physical facilities which could materially adversely affect our financial results.

 

Our business could be negatively impacted by security threats, including cybersecurity threats, ransomware, and other disruptions.

 

As a technology company, we face various security threats, including cybersecurity threats to gain unauthorized access to sensitive information. Although we utilize various procedures and controls to monitor these threats and mitigate our exposure to such threats, there can be no assurance that these procedures and controls will be sufficient in preventing security threats from materializing. If any of these events were to materialize, they could lead to losses of sensitive information, critical infrastructure, personnel or capabilities, essential to our operations and could have a material adverse effect on our reputation, financial position, results of operations, or cash flows.

 

Cybersecurity attacks in particular are evolving and include but are not limited to, malicious software, attempts to gain unauthorized access to data, and other electronic security breaches that could lead to disruptions in critical systems, unauthorized release of confidential or otherwise protected information and corruption of data. Although we have implemented systems and procedures that are designed to protect customer, employee, vendor and Company information, prevent data loss and other security breaches, and otherwise identify, assess, and analyze cybersecurity risks, these measures may not be effective. Development and maintenance of these systems is costly and requires ongoing monitoring and updating as technologies change and efforts to overcome security measures increase and become more sophisticated. We face an evolving threat landscape in which cybercriminals, among others, employ a complex array of techniques designed to access personal data and other information, including, for example, the use of fraudulent or stolen access credentials, malware, ransomware, phishing, denial of service and other types of attacks. While, to the best of our knowledge, we have not experienced any material misappropriation, loss or other unauthorized disclosure of confidential or personally identifiable information as a result of a security breach or cyber attack that could materially increase financial risk to the Company or our customers, such a security breach or cyber attack could adversely affect our business and operations, including by damaging our reputation and our relationships with our customers, employees and investors, exposing us to litigation, fines, penalties or remediation costs.

 

 

Risks Related To Our Common Stock

 

We have issued a substantial number of securities that are convertible into shares of our common stock which could result in substantial dilution to the ownership interests of our existing shareholders.

 

As of the date of this report, approximately 9,300,000 shares of our common stock were reserved for issuance upon exercise or conversion of outstanding stock options, warrants, and convertible notes. The exercise or conversion of these securities will result in a significant increase in the number of outstanding shares and substantially dilute the ownership interests of our existing stockholders. 

 

The availability of a substantial number of shares of our common stock for public sale may cause the price of our common stock to decline. 

 

Our most recent registration statement, which was declared effective in September 2019, covered the public resale of 2,040,000 shares of our common stock underlying a convertible note and 2,000,000 shares underlying warrants which we issued in a July 2019 private offering. In the first quarter of 2020, we amended the convertible note to reduce the conversion price to $0.65 per share which increased the number of shares issuable upon conversion of the note. As of the date of this report, approximately 5,000,000 shares have been converted under the note  In addition, on May 6, 2020, we issued a convertible note and warrants convertible and exercisable, respectively, into approximately 3,900,000 shares of common stock.  We have agreed to register the public resale of these shares which represent approximately 19% of our outstanding shares. The availability of these shares for sale to the public, whether or not sales have occurred or are occurring, and the sale of such shares in the public markets could have an adverse effect on the market price of our common stock. Such an adverse effect on the market price would make it more difficult for us to raise additional financing through the sale of equity or equity-related securities in the future at a time and price that we deem reasonable or appropriate.

 

An active trading market for our common stock may not be sustained.

 

Although our common stock is listed on the Nasdaq Capital Market, an active trading market for our shares may not be developed and if developed, sustained. If an active market for our common stock is not developed or sustained, it may be difficult for you to sell your shares without depressing the market price for the shares or sell your shares at all. Any inactive trading market for our common stock may also impair our ability to raise capital to continue to fund our operations by selling shares and may impair our ability to acquire other companies or technologies by using our shares as consideration.

 

If we fail to comply with the continued minimum closing bid requirements of the Nasdaq or other requirements for continued listing, our Common Stock may be delisted and the price of our Common Stock and our ability to access the capital markets could be negatively impacted.

 

Our common stock is listed for trading on Nasdaq. We must satisfy Nasdaq’s continued listing requirements, including, among other things, a minimum closing bid price requirement of $1.00 per share for 30 consecutive business days. A delisting of our common stock from Nasdaq could materially reduce the liquidity of our common stock and result in a corresponding material reduction in the price of our Common Stock. In addition, delisting could harm our ability to raise capital through alternative financing sources on terms acceptable to us, or at all, and may result in the potential loss of confidence by investors, employees and fewer business development opportunities.

 

In September 2019, we received a letter from the Nasdaq stating that our share price had not satisfied the continued listing requirement to maintain a minimum bid price of $1.00 per share, as set forth in Nasdaq Listing Rule 5550(a)(2). We were not able to regain compliance during the 180-day period following the letter, and have provided a written notice to the Nasdaq stating that it is our intention to regain compliance during the second 180-day period. On April 20, 2020, the Company received notice from the Listing Qualifications Department of The Nasdaq Capital Market that the grace period to regain compliance with the continued listing standard set forth in Rule 5550(a)(2) of the Nasdaq Listing Rules (the “Minimum Bid Price Requirement”) has been extended due to the global market impact caused by COVID-19. More specifically, Nasdaq has stated that the compliance periods for any company previously notified about non-compliance with the Minimum Bid Price Requirement will be suspended effective April 16, 2020, until June 30, 2020. On July 1, 2020, companies will receive the balance of any pending compliance period in effect on April 16, 2020 to come back into compliance with the applicable Minimum Bid Price Requirement. As a result of this extension, we now has until December 4, 2020, to regain compliance with the Minimum Bid Price Requirement.

 

 

 

We expect to raise additional funds in the future through issuances of securities and such additional funding may be dilutive to stockholders or impose operational restrictions.

 

We expect that we will need to raise additional capital in the future to help fund our operations through sales of shares of our common stock or securities convertible into shares of our common stock, as well as issuances of debt. Such additional financing may be dilutive to our stockholders, and debt financing, if available, and may involve restrictive covenants which may limit our operating flexibility. If additional capital is raised through the issuance of shares of our common stock or securities convertible into shares of our common stock, the percentage ownership of existing stockholders will be reduced. These stockholders may experience additional dilution in net book value per share and any additional equity securities may have rights, preferences and privileges senior to those of the holders of our common stock.

 

Because we do not expect to pay dividends for the foreseeable future, investors seeking cash dividends should not purchase our shares of common stock.

 

We have never declared or paid any cash dividends on our common stock, and we do not anticipate paying any cash dividends on our common stock in the foreseeable future. Our payment of any future dividends will be at the discretion of our board of directors after taking into account various factors, including but not limited to our financial condition, operating results, cash needs, growth plans and the terms of any credit agreements that we may be a party to at the time. Accordingly, investors seeking cash dividends should not purchase shares of our common stock. 

 

Our share ownership is concentrated which will limit your ability to influence corporate matters. 

 

Our directors, officers and principal stockholders, beneficially own approximately 36% of our common stock and will continue to have significant influence over the outcome of all matters submitted to the stockholders for approval, including the election of our directors and approval of significant corporate transactions. This concentration of ownership will limit your ability to influence corporate matters, and as a result, actions may be taken that you may not view as beneficial.    

 

Provisions of our certificate of incorporation, bylaws and Delaware law may make a contested takeover of our Company more difficult.

 

Certain provisions of our certificate of incorporation, bylaws and the General Corporation Law of the State of Delaware (“DGCL”) could deter a change in our management or render more difficult an attempt to obtain control of us, even if such a proposal is favored by a majority of our stockholders. For example, we are subject to the provisions of the DGCL that prohibit a public Delaware corporation from engaging in a broad range of business combinations with a person who, together with affiliates and associates, owns 15% or more of the corporation’s outstanding voting shares (an “interested stockholder”) for three years after the person became an interested stockholder, unless the business combination is approved in a prescribed manner. Our certificate of incorporation also includes undesignated preferred stock, which may enable our board of directors to discourage an attempt to obtain control of us by means of a tender offer, proxy contest, merger or otherwise. Finally, our bylaws include an advance notice procedure for stockholders to nominate directors or submit proposals at a stockholders meeting. Delaware law and our charter may, therefore, inhibit a takeover. 

 

The trading price of our common stock may be volatile.

 

The trading price of our shares has from time to time fluctuated widely and in the future may be subject to similar fluctuations. The trading price may be affected by a number of factors including the risk factors set forth in this prospectus as well as our operating results, financial condition, announcements of innovations or new products by us or our competitors, general conditions in the biometrics and access control industries, and other events or factors. We cannot assure you that any of the broker-dealers that currently make a market in our common stock will continue to serve as market makers or have the financial capability to stabilize or support our common stock. A reduction in the number of market makers or the financial capability of any of these market makers could also result in a decrease in the trading volume of and price of our shares. In recent years broad stock market indices, in general, and the securities of technology companies, in particular, have experienced substantial price fluctuations. Such broad market fluctuations may adversely affect the future-trading price of our common stock.  

  

ITEM 2. DESCRIPTION OF PROPERTY

 

We do not own any real estate. We conduct operations from leased premises in Eagan, Minnesota (5,544 square feet), and Wall, New Jersey (4,517 square feet), as well as in several home-office locations across the country. Internationally, we conduct operations from leased premises in Tsuen Wan, Hong Kong (1,098 square feet), and Jiangmen, China (3,267 square feet).

  

ITEM 3. LEGAL PROCEEDINGS

 

From time to time, we may be involved in litigation relating to claims arising out of our operations in the normal course of business.  As of the date of this report, we are not a party to any pending lawsuit.

  

ITEM 4. MINE SAFETY DISCLOSURES

 

Not applicable.

  

 

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Our common stock currently trades on the Nasdaq Capital Market under the symbol “BKYI”.

 

Holders

 

As of May 11, 2020, the number of stockholders of record of our common stock was 55.

 

Dividends

 

We have not paid any cash dividends on our common stock to date, and have no intention of paying any cash dividends on our common stock in the foreseeable future. The declaration and payment of dividends on our common stock is also subject to the discretion of our Board of Directors and certain limitations imposed under the DGCL. The timing, amount and form of dividends, if any, will depend on, among other things, our results of operations, financial condition, cash requirements and other factors deemed relevant by our Board of Directors.

 

Securities Authorized for Issuance under Equity Compensation Plans

 

The information concerning our equity compensation plans is incorporated by reference from information contained under the section “Equity Compensation Plans” in our Proxy Statement for the 2020 Annual Meeting of Stockholders. 

 

Unregistered Sales of Equity Securities

 

There were no unregistered sales of the Company’s equity securities during 2019 that were not previously disclosed in a Quarterly Report on Form 10-Q or in a Current Report on Form 8-K.

 

Rule 10B-18 Transactions

 

None.

 

ITEM 6. SELECTED FINANCIAL DATA

 

Not Applicable.

 

 

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

This Management’s Discussion And Analysis Of Financial Condition And Results Of Operations, and other parts of this Report contain forward-looking statements that involve risks and uncertainties. All forward-looking statements included in this Report are based on information available to us on the date hereof, and we assume no obligation to update any such forward-looking statements. Our actual results could differ materially from those anticipated in these forward-looking statements as a result of a number of factors, including those set forth in the section captioned “RISK FACTORS” in Item 1A and elsewhere in this Report. The following should be read in conjunction with our audited financial statements included elsewhere herein.

 

The following Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) is intended to help you understand the Company. The MD&A is provided as a supplement to and should be read in conjunction with our financial statements and the accompanying notes.

 

OVERVIEW

 

We develop and market advanced fingerprint biometric identification and identity verification technologies, as well as related identity management and credentialing fingerprint biometric hardware and software solutions. We were pioneers in developing automated, finger identification technology that supplements or compliments other methods of identification and verification, such as personal inspection identification, passwords, tokens, smart cards, ID cards, PKI, credit card, passports, driver’s licenses, OTP or other forms of possession or knowledge-based credentialing.  Advanced BIO-key technology has been and is used to improve both the accuracy and speed of competing finger-based biometrics. Our solutions are used by customers in every sector of our economy including government, financial services, education, manufacturing, retail, and call centers.

 

We provide the ability to positively identify and authenticate individuals before granting access to valuable corporate resources, web portals or applications in seconds.  Powered by our patented Vector Segment Technology (VST), WEB-key and BSP development kits are fingerprint biometric solutions that provide interoperability with dozens of reader manufacturers, enabling application developers and integrators to integrate fingerprint biometrics into their applications. 

 

Our biometric identification technology improves both the accuracy and speed of screening individuals, for identification purposes or for personal identity verification, by extracting unique data from a fingerprint and comparing it to existing similar fingerprint data. The technology has been built to be scalable and to handle databases containing millions of fingerprints. We achieve the highest levels of discrimination without requiring any other identifying data (multi-factor) such as a user ID, smart cards, or tokens, although our technology can be used in conjunction with such additional factors. Users of our technology have the option of on device or cloud authentication. This flexible authentication option in conjunction with our interoperable capabilities, is another key differentiator of our biometric identification solutions.

 

 

Our WEB-key solution is a client server suite that can be integrated into virtually any application, whether web based or desktop application based on Windows. The WEB-key solution is a security solution that protects the biometric data in processing, transmission and storage. WEB-key provides a turn-key solution for biometric as well as multi-factor authentication across an enterprise, government system or any user population.

 

We also develop and distribute hardware components that are used in conjunction with our software, and sell third-party hardware components with our software in various configurations required by our customers. Our products are interoperable with major fingerprint reader and hardware manufacturers, supporting Windows, Linux, Mac OS X, and Android operating systems enabling application developers, value added resellers, and channel partners to integrate our fingerprint biometrics into their applications, while dramatically reducing maintenance, upgrade and life-cycle costs. This interoperability is unique in the industry, and a key differentiator for our products in the biometric market. In our opinion, these features makes our technology more viable than competing technologies and expands the size of the overall market for our products.

 

In partnerships with OEMs, VARs, integrators, and solution providers, we market and sell biometric hardware and software solutions to SMBs, the Fortune 500 and government agencies.

 

We support industry standards, including PIV, FIPS, ANSI, ISO, SAML, and BioAPI among others. We have received National Institute of Standards and Technology (NIST) independent laboratory testing and certification of our ability to support Homeland Security Presidential Directive #12 (HSPD-12) and ANSI/INCITS-378 templates, as well as validation of our fingerprint match speed and accuracy in large database environments.

 

We have developed what we believe is the most discriminating and effective commercially available finger-based biometric technology. Our primary focus is in marketing and selling this technology to customers seeking to secure access to networks, applications and data on-premises or remotely. Our primary market focus includes, government, financial services, education, healthcare, manufacturing, retail, and call centers. 

 

PRODUCTS

 

We also offer a full line of easy to use finger scanners for both enterprise and consumer markets. Our SideSwipe, SideTouch and EcoID scanners are plug and play compatible with Microsoft Windows and our Q-180 Touch reader is a Micro USB compatible fingerprint reader for Android devices. The readers are currently sold in the Microsoft stores, as well as through their on-line channel, on Amazon, and through our website.  In 2018, we introduced OmniPass Consumer, a secure biometric-enabled application to manage multiple passwords for online apps, services, or accounts.

 

In 2015, Microsoft announced native support for biometrics in the Windows 8.1 and Windows 10 Operating platforms as well as Office 2016. With Microsoft Hello, any user can replace their PIN or password to access their device without any special software downloads by using our finger scanners, SideSwipe, SideTouch and EcoID, which are plug and play compatible with the Microsoft platforms. We have been the preferred partner, in particular at the Microsoft “Ignite your Business” Windows 10 and Office 2016 launch events..

 

Finally, our  ID Director for Windows and  ID Director for SAML  offer biometric authentication to SAML enables apps such as Office 365, GoToMeeting, Zoom, SalesForce, Google G-Suite, and many others.

 

STRATEGIC OUTLOOK

 

Historically, our largest market has been access control within highly regulated industries such as government, financial services, and healthcare.  During 2019 we became the go-to biometric authentication provider for board of election offices as eight offices deployed our hardware and software to secure internal access to the voter registration database. We will seek to extend this footprint in 2020 and beyond.

 

Working with our partner TTI, we expect to begin deploying several large-scale identity and access projects in the second quarter of 2020. We  are in the process of establishing an African subsidiary, to work closely with TTI who was awarded contracts of $45M and $30M. Under the first contract, we will provide biometric authentication to support the infrastructure of a new e-commerce project developed with the expectation to generate more than one million jobs in Nigeria. The second contract provides for  BIO-key hardware and software to  be used by a leading African telecommunications company to secure internal access to customer data. Based on information available today, Africa and the surrounding regions are receiving government funding to expand the use of biometric authentication solutions to help establish trustworthy government programs and reduce fraud.  As described above, the COVID-19 pandemic has and may continue to delay the rollout of these programs.

 

 

We plan to have a more significant role in the Identity and Access Management (IAM) market which continues to expand. We plan to offer customers a suite of authentication options that complement our biometric solutions. The more well-rounded offerings of authentication options will allow customers to customize their approach to authentication all under one umbrella.

 

As devices with onboard fingerprint sensors continue to deploy to consumers, we expect that third-party application developers will demand the ability to authenticate users of their respective applications (apps) with the onboard fingerprint biometric. We further believe that authentication will occur on the device itself for potentially low-value, and therefore low-risk, use-transactions and that user authentication for high-value transactions will migrate to the application provider’s authentication server, typically located within their supporting technology infrastructure, or cloud. We have developed our technology to enable, on-device authentication as well as network or cloud-based authentication and believe we may be the only technology vendor capable of providing this flexibility and capability. Our core technology works on major commercially available fingerprint readers, across Windows and Linux, Mac OS X and Android operating systems. This interoperability, coupled with the ability to authenticate users via the device or cloud, is unique in the industry, provides a key differentiator for us, and in our opinion, makes our technology more viable than competing technologies and expands the size of the overall market for our products.

 

We believe there is potential for significant market growth in the following key areas:

 

	●	Corporate network access control, corporate campuses, computer networks, and applications.
	●	Large scale identification projects, especially in Africa and the surrounding regions.
	●	Government funded initiatives, including with the state board of elections.
	●	International law enforcement use case applications as prospects see us as a global leader in the biometric technology space as witnessed by our agreement with the Israeli Defense Force, and the Singapore and Dubai Police departments.
	●	Consumer mobile credentialing, including mobile payments, credit and payment card programs, data and application access, and commercial loyalty programs.
	●	Demand for BIO-key hardware products from Windows 10 users and Fortune 500 companies.
	●	Government services and highly regulated industries including, Medicare, Medicaid, Social Security, Drivers Licenses, Campus and School ID, Passports/Visas.
	●	Continued growth in the Asia Pacific region.
	●	New remote authentication challenges – which our solutions are ideally suited to address.
	●	New opportunity to market our remote security solutions, spurred on because of the COVID-19 outbreak.

 

In the near-term, we expect to grow our business within government services and highly-regulated industries in which we have historically had a strong presence.  We believe that continued heightened security and privacy requirements in these industries will generate increased demand for security solutions, including biometrics. In addition, we expect that the integration of our technology into Windows 10, will accelerate the demand for our computer network log-on solutions and fingerprint readers.

 

Our two primary sales strategies call for expanded marketing efforts into the IAM market along with a dedicated pursuit of large-scale identification projects across the globe.

 

We also plan on expanding our new Channel Alliance Program which now has more than twenty participants and started to generate modest initial revenues.

 

RECENT DEVELOPMENTS

 

As discussed under “Item 1A. Risk Factors” above, an outbreak of a novel strain of the coronavirus, COVID-19, has been recognized as a pandemic by the World Health Organization. This outbreak has severely restricted the level of economic activity around the world. In response to this coronavirus outbreak the governments of many countries, states, cities and other geographic regions have taken preventative or protective actions,  including imposing restrictions on travel and business operations and requiring individuals to limit or forego their time outside of their homes. Given the uncertainty regarding the spread of this coronavirus, the related financial impact cannot be reasonably estimated at this time.

 

 

The complications caused by COVID-19 has forced organizations to quickly adapt to a work from home remote business model. This increases the risk of unauthorized users, phishing attacks, and hackers whom are eager to take advantage of the challenges of securing remote workers. We believe that biometrics should play a key role in remote user authentication.

 

RESULTS OF OPERATIONS

 

Consolidated Results of Operations

 

Two Year % trend

 

		Years ended December 31,
		2019				2018
Revenues
Services			40	%			25	%
License fees			20	%			43	%
Hardware			40	%			32	%
			100	%			100	%
Costs and other expenses
Cost of services			12	%			11	%
Cost of license fees			41	%			76	%
Cost of hardware			56	%			16	%
			109	%			103	%
Gross Profit (Loss)			-9	%			-3	%
Operating expenses
Selling, general and administrative			222	%			132	%
Research, development and engineering			58	%			35	%
Total operating expenses before impairment			280	%			167	%
Impairment of resalable software license rights			307	%			-
Operating loss			-596	%			-170	%
Other income (expense)
Total other income (expense)			-47	%			0	%
Net loss			-643	%			-170	%

  

Revenues and Costs and other expenses

 

										2019 - 2018
		2019				2018				$ Chg				% Chg
Revenues
Services		$	925,245			$	1,012,576			$	(87,331	)			-9	%
License fees			442,649				1,739,897				(1,297,248	)			-75	%
Hardware			899,634				1,292,069				(392,435	)			-30	%
Total Revenue		$	2,267,528			$	4,044,542			$	(1,777,014	)			-44	%
Costs and other expenses
Services		$	272,318			$	443,210			$	(170,892	)			-39	%
License fees			916,112				3,072,356				(2,156,244	)			-70	%
Hardware			1,272,815				648,624				624,191				96	%
Total Costs and other expenses		$	2,461,245			$	4,164,190			$	(1,702,945	)			-41	%

 

 

Revenues

 

Revenue decreased $1,777,014 or 44% to $2,267,528 in 2019 as compared to $4,044,542 in 2018 due to the factors stated below. 

 

For the years ended December 31, 2019 and 2018, service revenues included approximately $904,000 and $895,000, respectively, of recurring maintenance and support revenue, and approximately $21,000 and $118,000, respectively, of non-recurring custom services revenue.  Recurring service revenue increased 1% from 2018 to 2019 as we moved from a perpetual license to subscription based licensing. As our customer base continues to grow, we expect the recurring revenue to increase in future periods. Non-recurring custom services decreased 82% in 2019 as a result of a completed special software requirement from an existing customer in the first quarter of 2018.

 

For the years ended December 31, 2019 and 2018, license revenue decreased 75% to $442,649. The decrease was primarily due to one large international order received in the fourth quarter of 2018 in amount of approximately $1,111,000 without a comparable transaction  in the fourth quarter of 2019.

 

Hardware sales decreased by approximately $392,000, or 30%, to $899,634 in 2019 as a result of fewer large customer deployments, and primarily reduced lock sales.  Fingerprint reader sales decreased approximately $158,000, or 16%, while the biometric locks decreased approximately $235,000, or 84% from 2018.

 

Costs of goods sold

 

For the year ended December 31, 2019, cost of service decreased approximately 39% to $272,318, due to a completed special software requirement from an existing customer in the first quarter of 2018.

 

License costs for the year ended December 31, 2019 decreased approximately 70% to $916,112. The decrease was attributable primarily to the amortization and actual deployments of the software rights in the approximate amount of $884,000 in 2019 compared to $2,658,000 in 2018.

 

Hardware costs for the year ended December 31, 2019 increased approximately 96% to $1,272,815. The increase was attributable primarily to the write down of lock inventory and parts as a result of the discontinuance of lock sales in the US, offset by a decrease in factory costs due to reduced lock sales.

 

Selling, general and administrative

 

										2019 - 2018
		2019				2018				$ Chg				% Chg
		$	5,036,820			$	5,333,906			$	(297,086	)			-6	%

 

Selling, general and administrative costs for year ended December 31, 2019 were $5,036,820 representing a 6% decrease from over 2018. Decreases in costs included non-cash share-based compensation expenses, decreased bad debt expense, marketing personnel and related costs, and travel. These amounts were offset by increases in factoring fees, legal and accounting fees related to capital raising transactions, and insurance costs.

 

Research, development and engineering

 

										2019 - 2018
		2019				2018				$ Chg				% Chg
		$	1,331,667			$	1,415,401			$	(83,734	)			-6	%

 

For the year ended December 31, 2019, research, development and engineering costs were $1,331,667 representing a 6% decrease over 2018, as a result of decreased personnel, non-cash share-based compensation expenses, and costs related to our Hong Kong subsidiary. These amounts were offset by increased recruiting costs.

 

Impairment

 

										2019 - 2018
		2019				2018				$ Chg				% Chg
Impairment of resalable software license rights		$	(6,957,516	)			-			$	(6,957,516	)			n/a

 

 Impairment of assets relates to the write-down of the FingerQ resalable software license rights to zero in the fourth quarter of 2019.

 

Other income (expense)

 

										2019 - 2018
		2019				2018				$ Chg				% Chg
Interest income			154				80				74				93	%
Interest expense			(1,069,134	)			-				(1,069,134	)			n/a
		$	(1,068,980	)		$	80			$	(1,069,060	)

 

 

Interest expense for the 2019 period related to the interest expense on convertible debt financings and amortization of the debt discount and debt issuance costs incurred as a result of the convertible debt financings.

 

LIQUIDITY AND CAPITAL RESOURCES

 

Operating activities overview

 

Net cash used for operations during the year ended December 31, 2019 was approximately $1,850,000. Items of note included:

   

●

Net positive cash flows related to accounts receivable, prepayments, inventory, accounts payables, accruals and deferred revenue of approximately $2,222,000.

 

●

Net positive cash flows related to adjustments for non-cash expenses for impairment, depreciation, amortization, bad debt expense, and share-based compensation of approximately $10,609,000.

 

●

Negative cash flows related to changes in contract costs and factoring of approximately $105,000, due to working capital management.

 

Investing activities overview

 

Approximately $543,000 was used for investing activities during the year ended December 31, 2019 related to the purchase of a non-marketable bond for approximately $513,000 and capital expenditures of $30,000.

 

Financing activities overview

 

Approximately $2,149,000 was provided by financing activities during the year ended December 31, 2019 from the issuance and repayment of debt, including convertible notes, less fees.  

 

 

CAPITAL RESOURCES

 

Since our inception, our capital needs have been principally met through proceeds from the sale of equity and debt securities.  We expect capital expenditures to be less than $100,000 during the next twelve months.  

 

The following sets forth our primary sources of capital during the previous two years:

 

We entered into an accounts receivable factoring arrangement with a financial institution (the “Factor”) which has since been extended through October 31, 2020. Pursuant to the terms of the arrangement, from time to time, we sell to the Factor a minimum of $150,000 of certain of our accounts receivable balances per quarter on a non-recourse basis for credit approved accounts. The Factor remits 35% of the foreign and 75% of the domestic accounts receivable balance to us (the “Advance Amount”), with the remaining balance, less fees, forwarded to us once the Factor collects the full accounts receivable balance from the customer. In addition, from time to time, we receive over advances from the Factor. Factoring fees range from 2.75% to 15% of the face value of the invoice factored, and is determined by the number of days required for collection of the invoice. We expect to continue to use this factoring arrangement periodically to assist with our general working capital requirements due to contractual requirements.   

 

On August 24, 2018, we completed a public offering of units consisting of 1,380,000 shares of common stock and warrants to purchase 1,035,000 shares of common stock for an aggregate gross proceed of $2,070,000, or $1.50 per unit.

 

On April 4, 2019, we issued a $550,000 secured convertible debenture to an institutional investor with a maturity date of November 15, 2019 which was convertible into common stock at a conversion price of $1.50 per share. The debenture was redeemable at any time by payment of a premium to the principal balance starting at 5% and increasing to 20%.  The debenture was issued at a 7% original issue discount.  On July 10, 2019, this debenture was redeemed and repaid in full in connection with the financing described below.

 

 

On June 14, 2019, we issued a $157,000 principal amount convertible note to an institutional investor with a maturity date of November 14, 2019 which was convertible into common stock at a conversion price of $1.50 per share. The note was redeemable at any time by payment of a premium to the principal balance starting at 10% and increasing to 30%.  On July 10, 2019, this note was redeemed and repaid in full in connection with the financing described below.

 

On July 10, 2019, we issued a $3,060,000 principal amount senior secured convertible note (the “Original Note”) to an institutional investor. At closing, $2,550,000 was funded. The Note is secured by a lien on substantially all of our assets and properties and was convertible into shares of our common stock at a fixed conversion price of $1.50 per share.  Pursuant to amendments in the first and second quarter of 2020, we amended the Original Note to increase the principal amount to $3,789,000 as a result of interest and penalties, accelerated the maturity date to June 13,  2020, and reduced the conversion price to $0.65 per share (the “Amended Note”).  As a result of conversions of amounts due under the Amended Note into shares of the Company’s common stock, the current outstanding principal amount of the Amended Note is $539,000.

 

On January 13, 2020, we issued a $157,000 principal amount convertible note to an institutional investor with a maturity date of June 13, 2020 which was convertible into common stock at a conversion price of $1.50 per share. The note is redeemable at any time by payment of a premium to the principal balance starting at 10% and increasing to 30%. 

 

On February 13, 2020, we issued a $126,000 principal amount convertible note to an institutional investor with a maturity date of July 13, 2020 which was convertible into common stock at a conversion price of $1.15 per share. The note is redeemable at any time by payment of a premium to the principal balance starting at 10% and increasing to 30%. 

 

On April 20, 2020, we entered into a Paycheck Protection Program Term Note (the “SVB Note”) with Silicon Valley Bank (“SVB”) pursuant to the Paycheck Protection Program (the “Program”) of the recently enacted Coronavirus Aid, Relief, and Economic Security Act (“CARES Act”) administered by the U.S. Small Business Administration. We received total proceeds of $340,000 which will be used in accordance with the requirements of the CARES Act. We will apply to SVB for forgiveness of amounts due on the SVB Note to the extent they are used for eligible payroll costs, rent obligations, and covered utility payments incurred during the eight weeks following disbursement under the SVB Note.   Until the six-month anniversary of the date of the SVB Note (the “Deferral Expiration Date”), neither principal nor interest is due and payable. On the Deferral Expiration Date, the outstanding principal of the SVB Note that is not forgiven will convert to an amortizing term loan at an interest rate of 1% per annum requiring equal monthly payments of principal and interest through November 20, 2022.

 

On May 6, 2020, we issued a $2,415,000 principal amount senior secured convertible note (the “Note”).  The principal amount is due and payable in five equal monthly installments of $268,333 beginning seven months after the funding date with the remaining balance due in on the twelfth month after the date of funding.  The Note is convertible at a fixed convertible price of $1.16.

 

LIQUIDITY OUTLOOK

 

At December 31, 2019, our total cash and cash equivalents were approximately $79,000, as compared to approximately $324,000 at December 31, 2018.

 

As discussed above, we have historically financed our operations through access to the capital markets by issuing secured and convertible debt securities, convertible preferred stock, common stock, and through factoring receivables. We currently require approximately $525,000 per month to conduct our operations, a monthly amount that we have been unable to consistently achieve through revenue generation.  During 2019, we generated approximately $2,268,000 of revenue, which is below our average monthly requirements.

 

If we are unable to generate sufficient revenue to fund current operations or meet our goals, we will need to obtain additional third-party financing to (i) conduct the sales, marketing and technical support necessary to execute our plan to substantially grow operations, increase revenue and serve a significant customer base; and (ii) provide working capital. We may, therefore, need to obtain additional financing through the issuance of debt or equity securities.

 

Due to several factors, including our history of losses and limited revenue, our independent auditors have included an explanatory paragraph in their opinion related to our annual financial statements as to the substantial doubt about our ability to continue as a going concern. Our long-term viability and growth will depend upon the successful commercialization of our technologies and our ability to obtain adequate financing. To the extent that we require such additional financing, no assurance can be given that any form of additional financing will be available on terms acceptable to us, that adequate financing will be obtained to meet our needs, or that such financing would not be dilutive to existing stockholders. If available financing is insufficient or unavailable or we fail to continue to generate sufficient revenue, we may be required to further reduce operating expenses, delay the expansion of operations, be unable to pursue merger or acquisition candidates, or in the extreme case, not continue as a going concern.

 

OFF-BALANCE SHEET ARRANGEMENTS

 

We do not have any off-balance sheet arrangements that have, or are in the opinion of management reasonably likely to have, a current or future effect on our financial condition or results of operations.

 

CRITICAL ACCOUNTING POLICIES

 

Our financial statements are prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires that we make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting periods. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. We evaluate our estimates and assumptions on an ongoing basis. Our actual results may differ significantly from these estimates under different assumptions or conditions. With the exception of the adoption of ASC 842 for Leases and ASC 606 for Revenue Recognition, there have been no material changes to these estimates for the periods presented in this Annual Report on Form 10-K.

 

 

We believe that of our significant accounting policies, which are described in Note A of the notes to our consolidated financial statements included in this Annual Report on Form 10-K, the following accounting policies involve a greater degree of judgment and complexity. Accordingly, these are the policies we believe are the most critical to aid in fully understanding and evaluating our financial condition and results of operations.

 

1. Revenue Recognition

 

The Company adopted ASC 606 on January 1, 2018 using the modified retrospective method for all contracts not completed as of the date of adoption. In accordance with ASC 606, revenue is recognized when a customer obtains control of promised services. The amount of revenue recognized reflects the consideration to which the Company expects to be entitled to receive in exchange for these services. To achieve this core principle, the Company applies the following five steps: 

 

●

Identify the contract with a customer

●

Identify the performance obligations in the contract

●

Determine the transaction price

●

Allocate the transaction price to performance obligations in the contract

●

Recognize revenue when or as the Company satisfies a performance obligation

 

All of our performance obligations, and associated revenue, are generally transferred to customers at a point in time, with the exception of support and maintenance, and professional services, which are generally transferred to the customer over time.

 

Software licenses

Software license revenue consist of fees for perpetual software licenses for one or more of our biometric fingerprint solutions. Revenue is recognized at a point in time once the software is available to the customer for download. Software license contracts are generally invoiced in full on execution of the arrangement.

 

Hardware

Hardware revenue consists of fees for associated equipment sold with or without a software license arrangement, such as servers, locks and fingerprint readers. Customers are not obligated to buy third party hardware from us, and may procure these items from a number of suppliers. Revenue is recognized at a point in time once the hardware is shipped to the customer. Hardware items are generally invoiced in full on execution of the arrangement.

 

Support and Maintenance

Support and Maintenance revenue consists of fees for unspecified upgrades, telephone assistance and bug fixes. We satisfy our Support and Maintenance performance obligation by providing “stand-ready” assistance as required over the contract period. We record deferred revenue (contract liability) at time of prepayment until the contracts term occurs. Revenue is recognized over time on a ratable basis over the contract term. Support and Maintenance contracts are up to one year in length and are generally invoiced either annually or quarterly in advance.

 

Professional Services

Professional services revenues consist primarily of fees for deployment and optimization services, as well as training. The majority of our consulting contracts are billed on a time and materials basis, and revenue is recognized based on the amount billable to the customer in accordance with practical expedient ASC 606-10-55-18. For other professional services contracts, we utilize an input method and recognizes revenue based on labor hours expended to date relative to the total labor hours expected to be required to satisfy its performance obligation.

 

Contracts with Multiple Performance Obligations

Some contracts with customers contain multiple performance obligations. For these contracts, we account for individual performance obligations separately if they are distinct. The transaction price is allocated to the separate performance obligations on a relative standalone selling price basis.  The standalone selling prices are determined based on overall pricing objectives, taking into consideration market conditions and other factors, including the value of the contracts, the cloud applications sold, customer demographics, geographic locations, and the number and types of users within the contracts.

 

We considered several factors in determining that control transfers to the customer upon shipment of hardware and availability of download of software.  These factors include that legal title transfers to the customer, the Company has a present right to payment, and the customer has assumed the risks and rewards of ownership.

 

Accounts receivable from customers are typically due within 30 days of invoicing.  We do not record a reserve for product returns or warranties as amounts are deemed immaterial based on historical experience.

 

 

Costs to Obtain and Fulfill a Contract

Costs to obtain and fulfill a contract are predominantly sales commissions earned by the sales force and are considered incremental and recoverable costs of obtaining a contract with a customer. These costs are deferred and then amortized over a period of benefit determined to be four years. These costs are included as capitalized contract costs on the balance sheet. The period of benefit was determined by taking into consideration customer contracts, technology, and other factors based on historical evidence. Amortization expense is included in selling, general and administrative expenses in the accompanying condensed consolidated statements of operations.

  

2. Impairment or Disposal of Long Lived Assets, including Intangible Assets

 

We review our long-lived assets, including intangible assets subject to amortization, whenever events or changes in circumstances indicate that the carrying amount of such an asset may not be recoverable. Recoverability of these assets is measured by comparison of their carrying amount to the future undiscounted cash flows the assets are expected to generate. If such assets are considered impaired, the impairment to be recognized is equal to the amount by which the carrying value of the assets exceeds their fair value determined by either a quoted market price, if any, or a value determined by utilizing a discounted cash flow technique. In assessing recoverability, we must make assumptions regarding estimated future cash flows and discount factors. If these estimates or related assumptions change in the future, we may be required to record impairment charges. Intangible assets with determinable lives are amortized over their estimated useful lives, based upon the pattern in which the expected benefits will be realized, or on a straight-line basis, whichever is greater. We recorded an impairment charge for the 2019 year with respect to the FingerQ Resalable License Rights. Refer Note G – Resalable License Rights for additional information.

 

3. Research and Development Expenditures

 

Research and development expenses include costs directly attributable to the conduct of research and development programs primarily related to the development of our software products and improving the efficiency and capabilities of our existing software. Such costs include salaries, payroll taxes, employee benefit costs, materials, supplies, depreciation on research equipment, services provided by outside contractors, and the allocable portions of facility costs, such as rent, utilities, insurance, repairs and maintenance, depreciation and general support services. All costs associated with research and development are expensed as incurred.

 

4. Income Taxes

 

The provision for, or benefit from, income taxes includes deferred taxes resulting from the temporary differences in income for financial and tax purposes using the liability method. Such temporary differences result primarily from the differences in the carrying value of assets and liabilities. Future realization of deferred income tax assets requires sufficient taxable income within the carryforward period available under tax law. We evaluate, on a quarterly basis whether, based on all available evidence, it is probable that the deferred income tax assets are realizable. Valuation allowances are established when it is more likely than not that the tax benefit of the deferred tax asset will not be realized. The evaluation, as prescribed by ASC 740-10, “Income Taxes,” includes the consideration of all available evidence, both positive and negative, regarding historical operating results including recent years with reported losses, the estimated timing of future reversals of existing taxable temporary differences, estimated future taxable income exclusive of reversing temporary differences and carryforwards, and potential tax planning strategies which may be employed to prevent an operating loss or tax credit carryforward from expiring unused. Because of our historical performance and estimated future taxable income a full valuation allowance has been established.

    

5. Accounting for Stock-Based Compensation

 

We account for share based compensation in accordance with the provisions of ASC 718-10, “Compensation — Stock Compensation,” which requires measurement of compensation cost for all stock awards at fair value on date of grant and recognition of compensation over the service period for awards expected to vest. The majority of our share-based compensation arrangements vest over either a three or four year vesting schedule. We expense our share-based compensation under the ratable method, which treats each vesting tranche as if it were an individual grant. The fair value of stock options is determined using the Black-Scholes valuation model, and requires the input of highly subjective assumptions. These assumptions include estimating the length of time employees will retain their vested stock options before exercising them (the “expected option term”), the estimated volatility of our common stock price over the option’s expected term, the risk-free interest rate over the option’s expected term, and our expected annual dividend yield. Changes in these subjective assumptions can materially affect the estimate of fair value of stock-based compensation and consequently, the related amount recognized as an expense in the consolidated statements of operations. As required under the accounting rules, we review our valuation assumptions at each grant date and, as a result, are likely to change our valuation assumptions used to value employee stock-based awards granted in future periods. The values derived from using the Black-Scholes model are recognized as expense over the service period, net of estimated forfeitures (the number of individuals that will ultimately not complete their vesting requirements). The estimation of stock awards that will ultimately vest requires significant judgment. We consider many factors when estimating expected forfeitures, including types of awards, employee class, and historical experience. Actual results, and future changes in estimates, may differ substantially from our current estimates.

 

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

See financial statements appearing at pages 27-53 of this Annual Report on Form 10-K.

 

 

ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

 

ITEM 9A. CONTROLS AND PROCEDURES

 

Disclosure Controls and Procedures

 

Our management, with the participation of our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), evaluated the effectiveness of our disclosure controls and procedures as of December 31, 2019. The term “disclosure controls and procedures,” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), means controls and other procedures of a company that are designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that information required to be disclosed by a company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including its principal executive and principal financial officers, as appropriate to allow timely decisions regarding required disclosure. Based on the evaluation of our disclosure controls and procedures as of December 31, 2019, our CEO and CFO concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

 

Management’s Annual Report on Internal Control Over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations. Internal control over financial reporting is a process that involves human diligence and compliance and is subject to lapses in judgment and breakdowns resulting from human failures. Internal control over financial reporting also can be circumvented by collusion or improper management override. Because of such limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis by internal control over financial reporting. However, these inherent limitations are known features of the financial reporting process. Therefore, it is possible to design into the process safeguards to reduce, though not eliminate, the risk. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Under the supervision and with the participation of our management, including our CEO and CFO, we have conducted an evaluation of the effectiveness of our internal control over financial reporting as of December 31, 2019, based upon the framework in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on this evaluation, management has concluded that our internal control over financial reporting was effective as of December 31, 2019.

  

As we are a smaller reporting company, this annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this Annual Report on Form 10-K.

 

Changes in Internal Control Over Financial Reporting

 

No change in our internal control over financial reporting occurred during the quarter ended December 31, 2019 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

  

 

ITEM 9B. – OTHER INFORMATION

 

None.

 

PART III

 

ITEM 10. – DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

The information required by this item will be set forth under “Proposal No. 1: Election of Directors” in the 2020 Proxy Statement and incorporated herein by reference.

 

 

ITEM 11. – EXECUTIVE COMPENSATION

 

The information required by this item will be set forth under “Executive and Director Compensation” in the 2020 Proxy Statement and incorporated herein by reference.

 

 

ITEM 12. – SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

The information required by Item 403 of Regulation S-K regarding security ownership of certain beneficial owners and management will be set forth under “Stock Ownership” in the 2020 Proxy Statement and incorporated herein by reference.

 

The Equity Compensation Plan Information table required pursuant to Item 201(d) of Regulation S-K will be set forth in the 2020 Proxy Statement and incorporated herein by reference.

 

 

ITEM 13. – CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

The information required by this item will be set forth under “Transactions with Related Persons” and “Director Independence” in the 2020 Proxy Statement and incorporated herein by reference.

 

 

ITEM 14. – PRINCIPAL ACCOUNTING FEES AND SERVICES

 

The information required by this item will be set forth under “Ratification of Rotenberg Meril Solomon Bertiger & Guttilla, P.C. as Independent Registered Public Accounting Firm for 2020” in the 2020 Proxy Statement and incorporated herein by reference.  

 

 

ITEM 15. – EXHIBITS

 

(a)       The following documents are filed as part of this Report. Portions of Item 15 are submitted as separate sections of this Report:

 

 (1)  Financial statements filed as part of this Report:

 

  Reports of Independent Registered Public Accounting Firm

 

  Consolidated Balance Sheets as at December 31, 2019 and 2018

 

  Consolidated Statements of Operations—Years ended December 31, 2019 and 2018

 

  Consolidated Statements of Stockholders’ Equity (Deficit)—Years ended December 31, 2019 and 2018

 

  Consolidated Statements of Cash Flows—Years ended December 31, 2019 and 2018

 

  Notes to Consolidated Financial Statements—December 31, 2019 and 2018

 

(b)       The exhibits listed in the Exhibits Index immediately preceding such exhibits are filed as part of this Report

 

 

ITEM 16. – FORM 10-K SUMMARY

 

None.

 

 

ITEM 8—FINANCIAL STATEMENTS

 

The following financial statements of BIO-key International, Inc. are included herein at the indicated page numbers:
 

Report of Independent Registered Public Accounting Firm	28
Consolidated Balance Sheets as at December 31, 2019 and 2018	29
Consolidated Statements of Operations—Years ended December 31, 2019 and 2018	30
Consolidated Statements of Stockholders’ Equity (Deficit) —Years ended December 31, 2019 and 2018	31
Consolidated Statements of Cash Flows—Years ended December 31, 2019 and 2018	32
Notes to the Consolidated Financial Statements—December 31, 2019 and 2018	34

  

 

Report of Independent Registered Public Accounting Firm

 

To the Shareholders and Board of Directors of

BIO-key International, Inc.

Wall, NJ

 

Opinion on the Financial Statements

 

We have audited the accompanying consolidated balance sheets of BIO-key International, Inc. and Subsidiaries (the “Company”) as of December 31, 2019 and 2018, and the related consolidated statements of operations, stockholders’ equity (deficit) and cash flows for the years then ended, and the related notes (collectively referred to as the “financial statements”). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of its operations and its cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

 

Going Concern

 

The accompanying consolidated financial statements have been prepared assuming that the Company will continue as a going concern. As disclosed in the consolidated financial statements, the Company has suffered substantial net losses in recent years, has negative working capital and has an accumulated deficit at December 31, 2019 and is dependent on debt and equity financing to fund its operations, all of which raise substantial doubt about the Company’s ability to continue as a going concern. Management’s plans regarding these matters are disclosed in Note A. The consolidated financial statements do not include any adjustments that might result from the outcome of this uncertainty.

 

Change in Accounting Principles

 

As discussed in Note A and Note B to the financial statements, the Company has changed its method of accounting for revenue from contracts with customers as of January 1, 2018 due to the adoption of Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers. The Company adopted the new revenue standard using the modified retrospective approach.

 

As discussed in Note A and Note N to the financial statements, the Company adopted ASC 842, Leases as of January 1, 2019 using the modified retrospective approach. ASC 842 had a significant effect on the balance sheet resulting in increased non-current right of use assets and increased current and non-current lease liabilities, required by the new standard. 

 

Basis for Opinion

 

These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (“PCAOB”) and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits, we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

/s/ Rotenberg Meril Solomon Bertiger & Guttilla,P.C.
ROTENBERG MERIL SOLOMON BERTIGER & GUTTILLA, P.C.
We have served as the Company's auditor since 2010.
Saddle Brook, New Jersey
May 14, 2020

 

 

BIO-key International, Inc. and Subsidiaries

CONSOLIDATED BALANCE SHEETS

 

  

The accompanying notes are an integral part of these statements.

 

 

BIO-key International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF OPERATIONS

 

 

The accompanying notes are an integral part of these statements.

 

 

BIO-key International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (DEFICIT)

 

 

The accompanying notes are an integral part of these statements.

 

 

BIO-key International, Inc. and Subsidiaries

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

                                         

The accompanying notes are an integral part of these statements.

 

 

SUPPLEMENTARY DISCLOSURES OF CASH FLOW INFORMATION

 

 

The accompanying notes are an integral part of these statements.

 

 

BIO-key International, Inc. and Subsidiaries

NOTES TO THE FINANCIAL STATEMENTS

December 31, 2019 and 2018

 

 

 

 

 

  

 

  

 

 

 

 

  

 

 

 

   

  

 

 

 

 

 

 

 

 

 

 

    

 

 

 

 

 

EXHIBIT INDEX

 

 

Exhibit			Exhibit
No.
3.1			Certificate of Incorporation of BIO-key International, Inc., a Delaware corporation (incorporated by reference to Exhibit 3.1 to the current report on Form 8-K, filed with the SEC on January 5, 2005)
3.2			Bylaws (incorporated by reference to Exhibit 3.3 to the current report on Form 8-K, filed with the SEC on January 5, 2005)
3.3			Certificate of Amendment to Certificate of Incorporation (incorporated by reference to Appendix A to the definitive proxy statement, filed with the SEC on January 18, 2006)
3.4			Certificate of Amendment of Certificate of Incorporation of Bio-key International, Inc., a Delaware corporation (incorporated by reference to Exhibit 3.4 to the annual report on Form 10-K, filed with the SEC on March 31, 2015)
3.5			Certificate of Elimination of BIO-key International, Inc. filed October 6, 2015 (incorporated by reference to Exhibit 3.5 to the registration statement on Form S-1 File No. 333-208747 filed with the SEC on December 23, 2015)
3.6			Certificate of Designation of Preferences, Rights and Limitations of Series A-1 Convertible Preferred Stock (incorporated by reference to Exhibit 3.1 to the current report on Form 8-K, filed with the SEC on November 2, 2015)
3.7			Certificate of Designation of Preferences, Rights and Limitations of Series B-1 Convertible Preferred Stock (incorporated by reference to Exhibit 3.1 to the quarterly report on Form 10-Q, filed with the SEC on November 16, 2015)
3.8			Certificate of Amendment of Certificate of Incorporation of Bio-key International, Inc., a Delaware corporation (incorporated by reference to Exhibit 3.1 to the current report on Form 8-K, filed with the SEC on December 28, 2016)
4.1			Specimen Stock Certificate (incorporated by reference to Exhibit 4.1 to the registration statement on Form SB-2, File No. 333-16451)
10.1			Employment Agreement by and between BIO-key International, Inc. and Mira LaCous dated November 20, 2001 (incorporated by reference to Exhibit 10.39 to the current report on Form 8-K, filed with the SEC on January 22, 2002)***
10.2			BIO-key International, Inc. 2004 Stock Incentive Plan (incorporated by reference to Exhibit 10.48 to amendment no. 1 the registrant’s registration statement on Form SB-2, File No. 33-120104, filed with the SEC on December 14, 2004)
10.3			Employment Agreement, effective March 25, 2010, by and between the Company and Michael W. DePasquale (incorporated by reference to Exhibit 10.93 to the annual report on Form 10-K, filed with the SEC on March 26, 2010)***
10.4			Employment Agreement by and between BIO-key International, Inc. and Cecilia Welch dated May 15, 2013 (incorporated by reference to Exhibit 10.42 to the annual report on Form 10-K, filed with the SEC on March 31, 2014)***
10.5			Third Amendment to Lease Agreement by and between BIO-key International, Inc. and Victor AOP, Inc. dated June 30, 2013 (incorporated by reference to Exhibit 10.43 to the annual report on Form 10-K, filed with the SEC on March 31, 2014)
10.6			First Amendment to Lease Agreement by and between BIO-key International, Inc. and BRE/DP MN LLC dated September 12, 2013 (incorporated by reference to Exhibit 10.44 to the annual report on Form 10-K, filed with the SEC on March 31, 2014)

 

10.7			Form of Registration Rights Agreement (incorporated by reference to Exhibit 10.2 to the quarterly report on Form 10-Q, filed with the SEC on November 16, 2015)
10.8			BIO-key International, Inc. 2015 Equity Incentive Plan (incorporated by reference to Appendix B to the definitive proxy statement filed with the SEC on December 15, 2015)

 

 

10.9			Software License Purchase Agreement Dated November 11, 2015 by and among BIO-key Hong Kong Limited, Shining Union Limited, WWTT Technology China, Golden Vast Macao Commercial Offshore Limited, Giant Leap International Limited (incorporated by reference to Exhibit 10.36 to the registration statement on Form S-1 File No. 333-208747 filed with the SEC on December 23, 2015)**
10.10			Common Stock Purchase Agreement dated May 2, 2017 by and between Registrant and Xanthe Holdings Ltd. (incorporated by reference to Exhibit 10.2 to the quarterly report on Form 8-K, filed with the SEC on May 3, 2017)
10.11			Form of Registration Rights Agreement (incorporated by reference to Exhibit 10.3 to the current report on Form 8-K, filed with the SEC on May 3, 2017)
10.12			Form Non-Plan Option Agreement between the Company and certain of its directors, officers, employees and contractors (incorporated by reference to Exhibit 10.4 to the quarterly report on Form 10-Q filed with the SEC on May 15, 2017)***
10.13			Securities Purchase Agreement dated April 3, 2018 by and between the Registrant and Wong Kwok Fong (Kelvin) (incorporated by reference to Exhibit 10.1 to the current report on Form 8-K, filed with the SEC on April 4, 2018)
10.14			Securities Purchase Agreement dated May 23, 2018 by and between the Registrant and Giant Leap International Limited (incorporated by reference to Exhibit 10.1 to the current report on Form 8-K, filed with the SEC on May 30, 2018)
10.15			Securities Purchase Agreement dated May 23, 2018 by and between the Registrant and Micron Technology Development Limited (incorporated by reference to Exhibit 10.2 to the current report on Form 8-K, filed with the SEC on May 30, 2018)
10.16			Securities Purchase Agreement dated May 31, 2018 by and between the Registrant and Wong Kwok Fong (Kelvin) (incorporated by reference to Exhibit 10.1 to the current report on Form 8-K, filed with the SEC on June 4, 2018)
10.17			Underwriting Agreement dated August 22, 2018 by and between the Registrant and Maxim Group LLP (incorporated by reference to Exhibit 1.1 to the current report on Form 8-K, filed with the SEC on August 27, 2018)
10.18			Form of Common Stock Purchase Warrant dated August 24, 2018 (incorporated by reference to Exhibit 4.1 to the current report on Form 8-K, filed with the SEC on August 27, 2018)
10.19			GLP 2nd Amendment to Lease dated July 27, 2018 (incorporated by reference to Exhibit 10.26 to the annual report on Form 10-K, filed with the SEC on April 1, 2019)
10.20			Marlen 4th Amendment to Lease dated June 2, 2018 (incorporated by reference to Exhibit 10.27 to the annual report on Form 10-K, filed with the SEC on April 1, 2019)
10.21			Securities Purchase Agreement dated July 10, 2019 by and between the Registrant and Lind Global Macro Fund, LP. (incorporated by reference to Exhibit 10.1 to the quarterly report on Form 10-Q, filed with the SEC on August 14, 2019)
10.22			Security Agreement dated July 10, 2019 by and between the Registrant and Lind Global Macro Fund, LP. (incorporated by reference to Exhibit 10.2 to the quarterly report on Form 10-Q, filed with the SEC on August 14, 2019)
10.23			Collateral Sharing Agreement dated July 10, 2019 by and among the Registrant, Lind Global Macro Fund, LP and Versant Funding LLC (incorporated by reference to Exhibit 10.3 to the quarterly report on Form 10-Q, filed with the SEC on August 14, 2019)
10.24			$3,060,00 Senior Secured Convertible Promissory Note dated July 10, 2019 (incorporated by reference to Exhibit 10.4 to the quarterly report on Form 10-Q, filed with the SEC on August 14, 2019)
10.25			Common Stock Purchase Warrant dated July 10, 2019 (incorporated by reference to Exhibit 10.5 to the quarterly report on Form 10-Q, filed with the SEC on August 14, 2019)
10.26			BIO-key International, Inc. Amended and Restated 2015 Equity Incentive Plan (incorporated by reference to Appendix A to the definitive proxy statement filed with the SEC on April 30, 2019)***
21.1			List of subsidiaries of BIO-key International, Inc. (incorporated by reference to Exhibit 21.1 to the annual report on Form 10-K, filed with the SEC on March 30, 2016)
23.1*			Consent of RMSBG

 

 

31.1*			Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2*			Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1*			Certification of the Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2*			Certification of the Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

  

 

101.INS*	XBRL Instance
101.SCH*	XBRL Taxonomy Extension Schema
101.CAL*	XBRL Taxonomy Extension Calculation
101.DEF*	XBRL Taxonomy Extension Definition
101.LAB*	XBRL Taxonomy Extension Labels
101.PRE*	XBRL Taxonomy Extension Presentation

 

*  filed herewith

 

** Confidential treatment has been requested with respect to certain portions of this exhibit. Omitted sections have been filed separately with the Securities and Exchange Commission

 

*** Management compensatory plan.

 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

	BIO-KEY INTERNATIONAL, INC.
Date: May 14, 2020	By:	/s/  MICHAEL W. DEPASQUALE
		Michael W. DePasquale
		CHIEF EXECUTIVE OFFICER (Principal Executive Officer)

 

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities on the dates indicated.

 

 

Signature		Title		Date
/s/  MICHAEL W. DEPASQUALE		Chairman of the Board of Directors, Chief Executive Officer and Director (Principal Executive Officer)		May 14, 2020
Michael W. DePasquale
/s/  CECILIA WELCH		Chief Financial Officer (Principal Financial and Accounting Officer)		May 14, 2020
Cecilia Welch

 

 

/s/ROBERT J. MICHEL		Director		May 14, 2020
Robert J. Michel
/s/  THOMAS E. BUSH III		Director		May 14, 2020
Thomas E. Bush
/s/  THOMAS GILLEY		Director		May 14, 2020
Thomas Gilley
/s/  WONG KWOK FONG		Director		May 14, 2020
Wong Kwok Fong
/s/  YAO JIANHUI		Director		May 14, 2020
Yao Jianhui
/s/  FABIAN SHIN		Director		May 14, 2020
Fabian Shin
/s/  PIETER KNOOK		Director		May 14, 2020
Pieter Knook

 

/s/  MANNY ALIA		Director		May 14, 2020
Manny Alia