Attached files
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549
FORM 10-K
ý | ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the fiscal year ended March 28, 2015
OR
¨ | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
Commission File Number: 0-12853
ELECTRO SCIENTIFIC INDUSTRIES, INC.
(Exact name of registrant as specified in its charter)
Oregon | 93-0370304 | |
(State or other jurisdiction of incorporation or organization) | (I.R.S. Employer Identification No.) | |
13900 N.W. Science Park Drive, Portland, Oregon | 97229 | |
(Address of principal executive offices) | (Zip Code) | |
Registrant’s telephone number, including area code: 503-641-4141
Securities registered pursuant to Section 12(b) of the Act:
None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, without par value
Indicate by check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨ No ý
Indicate by check mark if the Registrant is not required to file reports pursuant Section 13 or Section 15(d) of the Act. Yes ¨ No ý
Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No ¨
Indicate by check mark whether the Registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the Registrant was required to submit and post such files). Yes ý No ¨
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K, or any amendment to this Form 10-K. ¨
Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer”, “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer ¨ Accelerated filer ý Non-accelerated filer ¨ Smaller reporting company ¨
Indicate by check mark whether the Registrant is a shell company (as defined in Rule 12b-2 of the Act). Yes ¨ No ý
The aggregate market value of the voting and non-voting common equity held by non-affiliates, computed by reference to the last sales price $6.86 as reported by the NASDAQ Stock Market, as of the last business day of the Registrant’s most recently completed second fiscal quarter (September 27, 2014) was $184,853,200.
The number of shares outstanding of the Registrant’s Common Stock as of June 22, 2015 was 30,757,322 shares.
Documents Incorporated by Reference
The Registrant has incorporated into Part III of this Form 10-K, by reference, portions of its Proxy Statement for its 2015 Annual Meeting of Shareholders.
ELECTRO SCIENTIFIC INDUSTRIES, INC.
2015 FORM 10-K ANNUAL REPORT
TABLE OF CONTENTS
Part I | ||
Part II | ||
Part III | ||
Part IV | ||
PART I
Item 1. Business
This annual report on Form 10-K contains forward-looking statements that are subject to risks and uncertainties. Actual results may differ materially from the forward-looking statements. Factors that could cause or contribute to such differences include, but are not limited to, those discussed below in Item 1A Risk Factors.
Where You Can Find More Information
We file annual, quarterly and current reports, proxy statements and other information with the Securities and Exchange Commission (SEC) under the Securities Exchange Act of 1934 as amended (Exchange Act). You can inspect and copy our reports, proxy statements and other information filed with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, D.C 20549. Please call the SEC at 1-800-SEC-0330 for further information on the Public Reference Room. The SEC maintains an Internet site at www.sec.gov where you can obtain most of our SEC filings. We also make available, free of charge on our website at www.esi.com, our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after they are filed electronically with the SEC. The information found on our website is not part of this Form 10-K. You can also obtain copies of these reports by contacting Investor Relations at (503) 641-4141.
Fiscal Year
Our fiscal year consists of 52 or 53 weeks ending on the Saturday nearest March 31. Accordingly, our fiscal 2015 reporting period consisted of a 52-week period ending on March 28, 2015, our fiscal 2014 consisted of a 52-week period ending on March 29, 2014 and our fiscal 2013 reporting period consisted of a 52-week period ending on March 30, 2013. All references to years or quarters relate to fiscal years or fiscal quarters unless otherwise noted.
Business Overview
Electro Scientific Industries, Inc. and its subsidiaries (ESI) is a leading supplier of innovative laser-based manufacturing solutions for the microtechnology industry. ESI's integrated solutions allow industrial designers and process engineers to control the power of laser light to transform materials in ways that differentiate their consumer electronics, wearable devices, semiconductor circuits and high-precision components for market advantage. Founded in 1944, ESI is headquartered in Portland, Oregon, with global operations and subsidiaries in Asia, Europe and North America.
Laser microfabrication is comprised of a set of precise micron-level processes, including drilling, scribing, dicing, singulation, cutting, ablating, trimming, and precision marking on multiple types of materials. These processes require application-specific laser systems that are able to meet our customers’ exacting performance and productivity requirements. Our laser-based systems are utilized in the production of consumer electronics, flexible and rigid printed circuit boards, semiconductor devices, advanced semiconductor packaging, electronic sensors, touch-panel glass, flat panel liquid crystal displays (LCDs) and other high value components and devices to enable functionality, increase performance and improve production yields.
Additionally, we produce high-capacity test and inspection equipment that is critical to the quality control process during the production of multilayer ceramic capacitors (MLCCs). Our equipment ensures that each component meets the electrical and physical tolerances required to perform properly.
Industry Overview
The microelectronics, printed circuit board (PCB) and semiconductor industries continue to be driven by demand for advanced features and improved functionality in increasingly smaller and smarter consumer devices. The technologies for consumer electronic devices such as smart phones, tablets, personal computers, mobile computing devices, video game systems and high-definition televisions have developed rapidly as increasingly affordable products have been introduced that offer more functionality in smaller packages. In addition, semiconductor and other advanced technologies are being used in a broadening set of markets and applications, including automotive, aerospace, medical, security and general lighting.
These dynamics in turn are driving the need for faster, smaller, more complex, less expensive and higher-quality electronic devices and components. To achieve these improvements, component and other device manufacturers are increasing the circuit and feature densities in these devices and investing in new technologies.
For example, smaller and lighter semiconductor devices are driving the need to shrink the physical dimensions of the semiconductor packaging and the high density interconnect (HDI) circuit board on which they are mounted. In addition,
4
integrated circuit (IC) designers are moving high level interconnect from silicon to the package (ICP) to reduce overall cost in consumer devices. Higher operating speeds of computers and communication products require more input and output channels within packages and between the packages and the HDI circuit board. These trends require smaller, more accurate, and precisely tapered or shaped holes, known as vias, to create connections between layers and interconnecting devices. The continual trend toward smaller and smarter devices also requires the use of an increasing amount of flexible interconnect material between PCBs and other components. These flexible circuits require the smallest and most accurate vias to create the connections between these devices.
In addition, the ability to shrink the actual dimensions of a device is becoming increasingly more difficult, and producers are investing in new technologies, such as stacking thin silicon wafers to create advanced three dimensional (3D) chip packages. We believe this trend may drive additional applications for laser processing, including scribing and dicing of ultra-thin wafers, drilling of through silicon vias (TSV) and scribing of next generation thin films.
Smaller and more complex devices also require more capacitance to be designed into circuits. This has resulted in an increase in the use of smaller, higher-capacitance passive components such as MLCCs. In calendar year 2014, estimated production of MLCCs was approximately 3 trillion units. These MLCCs must be tested electrically and optically to characterize performance and ensure reliability. Automated equipment to test these MLCCs in the manufacturing environment, like our high capacitance tester, can test and sort up to one million parts per hour on parts with dimensions as small as 0.4 by 0.2 millimeters.
Our business is also comprised of specialized microfabrication applications. Any material that can be cut, drilled, marked or joined using a mechanical process can be microfabricated with greater precision and accuracy using a laser-based solution. As consumer electronics and other products or devices become more compact, mechanical processes will not be able to meet the stringent specifications demanded by producers. We believe the capabilities of laser-based solutions for microfabrication will enable our customers to continue to move beyond the limitations of mechanical processes and generate growth for us in the future.
Our Solutions
We believe our products address the needs of microelectronics, PCB and semiconductor manufacturers by providing them with a high return on their investment due to measurable production benefits such as lower cost of ownership, higher performance, continued miniaturization, greater reliability, and improved production yield.
Our core competencies enable us to design, manufacture, and market a variety of integrated laser-based solutions for microfabrication applications in high-volume manufacturing environments. These core competencies include a deep understanding of laser-material interaction, laser beam positioning, optics and illumination including image processing and optical character recognition, high-speed motion control, small parts handling, proprietary laser technology including laser power control and systems engineering. We combine this technology expertise with a thorough understanding of our customers’ processes, and our manufacturing agility to respond rapidly to customer demand to develop and deliver integrated solutions and products that address multiple markets and applications.
Our customers manufacture components, interconnect/packaging devices, semiconductors, displays, casings or other parts and devices that serve a wide range of electronic applications. Our systems enable the manufacturing of these components and devices. The primary end-market applications for our customers are in consumer electronics, including smart mobile devices such as smart phones and tablets, computers and semiconductors. These devices and applications are also utilized in a variety of other industries including automotive, aerospace, medical, security and general lighting.
Our Strategy
Our strategy is to leverage our core competencies to be a cost of ownership leader in laser-based microfabrication for microtechnology industries, including microelectronics, PCB, semiconductor and other micro-industrial applications. These core competencies, combined with an understanding of our customers’ processes and the use of common platforms, enable us to address a broad range of laser-based applications and end markets within these industries. We intend to focus our efforts on businesses and applications where our differentiated capability enables us to be a market leader. The elements of our strategy are to (1) expand our addressable market by focusing on large, existing, near-adjacent applications in the growing laser microfabrication market, (2) invest in localized demonstration capability, application development and design, particularly in China, (3) leverage proprietary laser technology to create competitive advantage, (4) strengthen marketing capability and broaden customer focus, and (5) develop and leverage flexible platforms and technology for cost of ownership and time to market advantage in new applications.
5
Expand our addressable market by focusing on large, existing, near-adjacent applications in the growing laser microfabrication market
Growth in consumer electronics, smart phones, tablets, notebook computers and other smart devices is driving increased miniaturization and complexity of the underlying components and materials, which in turn is creating additional opportunities for laser-based microfabrication. In addition, these materials and components are being adopted in electronic devices, sensors, displays, and other technologies ubiquitously across many markets and applications including automotive, aerospace, medical, communications, appliances, security, general lighting, energy, and entertainment. As a result, we believe there are many large, existing, near-adjacent opportunities for laser micromachining for both the devices themselves and components within them. Our strategy is to expand our addressable market in these near-adjacent applications where we can utilize our technology for a cost of ownership advantage for our customers. Our primary areas of focus are to grow our presence in PCB/interconnect value added laser processes, expand our consumer electronics device micromachining product and customer base, and extend the reach of our existing product portfolio. For example, in 2015 we introduced new capabilities for flex circuit via drilling, IC package via drilling, and precision laser micromachining on a variety of materials at a new level of price performance. We believe our growth will be driven by overall growth in the market for these devices, and expanding the applications and customers we address.
Invest in localized demonstration capability, application development and design, particularly in China
A significant portion of customers are located in Asia, particularly China. In addition, purchase decisions, product evaluation and qualification are increasingly made locally. As a result, we believe we need to have a stronger local presence in order to respond rapidly to customer requirements and timelines. Our strategy is to invest additional resources for local demonstration, application development, and design capability. In addition, we expect to develop local manufacturing capability or delivery capability through third party and/or local sources of supply. For example, this year we invested in expanding our applications and design center in Shanghai, China, and acquired Wuhan Topwin Optoelectronics Technology Co., Ltd. (Topwin) based in Wuhan, China. These investments provide a significant increase in local presence and will enable us to leverage local design, application development, and supply chain to be more responsive to customer requirements and timelines.
Leverage proprietary laser technology to create competitive advantage
ESI has been a pioneer in laser-material interaction and has developed deep expertise in the use of multiple types of laser technology to develop customer solutions. Over the last four years we have invested in proprietary laser technology through the acquisitions of PyroPhotonics Lasers, Inc., Eolite Systems and the Semiconductor Systems business of GSI Group, Inc. These acquisitions, combined with internally developed capability, provide us with access to tailored pulse fiber technology, high power UV nanosecond, and low cost picosecond fiber lasers with a unique, scalable architecture. In 2015 we introduced two new laser products that were utilized in our systems and expect additional applications using our laser capability in 2016. Our strategy is to utilize these technologies to enable differentiated capability with our systems, lower cost, and generate incremental revenue and gross profit for the company.
Strengthen marketing capability and broaden customer focus
The company’s close collaboration with key customers who are leaders in their respective industries has enabled ESI to develop world-class technologies that meet the emerging needs of these demanding customers. Our strategy is to modify our approach to product development so we can meet needs across broader markets as opposed to a few key customers only. We believe this new approach will enable our products to serve the needs of a far larger portion of the laser microfabrication market. We plan to strengthen our marketing capability and channel reach through external hiring, employee training and development, increased localization, and use of channel partners.
Leverage flexible platforms and technology for cost of ownership and time to market advantage
Our key technological capabilities include laser-material interaction, laser beam positioning, optics and illumination, high-speed motion control systems, small parts handling systems and systems integration. Our strategy is to incorporate these capabilities into a series of flexible platforms that have multiple common elements but are tailored to specific applications. Our strategy is to leverage our investment in these platforms to address multiple new applications and market opportunities. In addition, we believe that leveraging common platforms will increase efficiency in the company through greater use of common parts, lower inventory requirements, shorter cycle times, and leveraged engineering investment across the company.
6
Our Products
Historically and during much of 2015, we operated in one segment, high-technology manufacturing equipment, which was comprised of products that were classified in three groups: interconnect and micromachining, semiconductor and components. As a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business, we realigned our products into two segments, Component Processing and Micromachining. Included within Component Processing are interconnect products, semiconductor products and component products. The interconnect, semiconductor and component products are sold primarily to manufacturers of electronic components and are used to drill, cut, trim, ablate, test and mark features that improve the yield or functionality of the component. Micromachining products are sold primarily to manufacturers of end devices across multiple industries and are used primarily to drill, cut or mark features on a variety of materials, generally on the casing or external surface of the end device. In addition, micromachining products tend to serve markets that require fewer features, less stringent design requirements, and lower cost.
Component Processing
Interconnect Products (IP)
Our laser systems for interconnect products address multiple applications and materials on a broad set of substrates, panels, and continuous-feed reels primarily for the PCB, packaging, and display industries. Our laser via drilling systems target electrical interconnect applications that require the highest accuracy and smallest via (hole) dimensions to create electrical connections between layers in flexible circuits, high-density circuit boards and IC packages. Our micro via drilling technology addresses the rapidly changing applications in IC packages, multichip modules and HDI circuit boards. Our ultraviolet (UV) laser processing systems employ state-of-the-art technology in lasers, optics and motion control. These products include single-beam and multi-beam systems that produce high-quality vias with the best-in-class placement accuracy for improved yield of packages and substrates.
These same technologies can be used to singulate individual PCB’s (depaneling), rout copper openings on PCB material, precisely cut flexible circuit material, and mark individual packages or circuit boards. These products may also machine other types of materials that come in a panel format including cutting, processing or drilling in display glass.
Semiconductor Products (SP)
Our Semiconductor manufacturing products address multiple applications that utilize laser energy to process materials on wafer-based substrates and semiconductor devices and packages. Applications include processing of silicon wafers, mixed signal devices, hybrid circuits, sensors, and resistors.
Semiconductor Systems
In May 2013, we acquired the assets of the Semiconductor Systems business from GSI Group Inc. These products include industry leading wafer marking equipment, wafer and circuit trim tools, and LCD repair tools. Wafer marking equipment is used for serialization and wafer identification by both manufacturers of semiconductor wafers and within semiconductor fabs. Wafer and circuit trim tools are laser systems that adjust the electrical performance of semiconductor devices or hybrid circuits by removing a precise amount of material from one or more circuit components.
3D Semiconductor Wafer Processing
The advent of 3D chip packaging technologies is driving the need for silicon wafers to become thinner in order to allow for stacking of wafers within the same packaging geometry. As wafers become thinner, they become more challenging to cut into discrete chips using traditional mechanical saws. Our model 9900 uses a laser to dice ultra-thin silicon wafers, those with a thickness of 50 microns or below, and to singulate interposers. In addition, this platform can be used to scribe next generation thin film materials that lend themselves to laser processing. As 3D technologies are developed, we believe the use of advanced laser technology will become increasingly important to productivity and performance.
LCD Repair
Our laser LCD repair systems are critical to improving yields in the manufacture of flat panel displays. During production, individual pixels of a display may develop electrical defects that result in no light emission or the emission of only a steady white light. To correct these defects, flat panel display producers employ a laser repair process to isolate the electrical defects during production by cutting the inputs to the pixel. Our laser systems are primarily sold to the manufacturers of LCD repair tools as a key component of their products.
7
Component Products (CP)
Our Component manufacturing products combine high-speed small parts handling technology with real-time control systems to provide highly automated, cost-effective inspection solutions for manufacturers of MLCCs and other passive components such as capacitor arrays, inductors, resistors, varistors and hybrid circuits. These components, produced in quantities of trillions of units per year, process analog, digital and high-frequency signals and are used extensively in nearly all electronic products. Our MLCC test systems employ high-speed handling and positioning techniques to precisely load, test and sort MLCCs based on their electrical energy storage capacity, or capacitance, and their electrical energy leakage, or dissipation factor. Our 35XX series is the most productive tester in the market today. Our latest 3510 model enables high-speed testing of the industry’s smallest metric 0402 capacitors used primarily in advanced cell phone and tablet designs. We also produce consumable products such as carrier plates and termination belts, both of which are used to hold MLCCs during the manufacturing and testing process.
Micromachining
Micromachining Products (MP)
Micromachining products are comprised of laser systems that are used primarily by manufacturers of end devices across multiple industries to drill, cut or mark features on a variety of materials, generally on the casing or external surface of the end device. In addition, micromachining products tend to serve markets that require fewer features, less stringent design requirements, and lower cost.
Micromachining Systems
As technologies enable consumer electronics and other devices to become more compact, mechanical processes are not able to meet the stringent specifications demanded by manufacturers. We offer several platforms that enable customers to perform precision drilling, scribing, cutting, etching, routing or marking on many different types of materials and devices including glass, metal, plastic, paint and ceramics. During 2015 we introduced the LumenESI platform to address multiple applications requiring mid-range performance. We also offer laser ablation systems that ablate material for identification and analysis applications, including forensics, mineral analysis and research.
Topwin Systems
During 2015 we acquired Topwin, a fast growing, laser design and manufacturing systems company located in China. Topwin possesses a portfolio of low-cost laser technology products that serve the needs of the consumer electronics industry in touch-panel processing, PCB cutting, precision welding, and a variety of marking and cutting applications. The acquisition of Topwin is expected to provide ESI with both system capability and market understanding to serve customers in China. ESI expects the China market to contribute substantially to the company’s growth over the next several years.
Laser Systems
In June 2012, we acquired Eolite Systems (Eolite), a designer and manufacturer of unique high-power fiber lasers in Pessac, France. The acquisition of Eolite provided us access to high power UV nanosecond and low cost picosecond fiber lasers with a unique, scalable architecture. Combined with capability from our Pyrophotonics laser business, these lasers address multiple micromachining applications including thin film processing, glass processing, material trimming, precision drilling, and organic and metal cutting. We intend to utilize these lasers internally to provide differentiated capability and cost of ownership as well as provide potential additional commercial revenue for the company with the ability to customize lasers to specific customer applications with differentiated capability and lower cost in markets or applications that are not core to our internally developed systems.
Customers
Our top ten customers for 2015, 2014 and 2013 accounted for approximately 40%, 41% and 61% of total net sales, respectively. One customer, Apple Inc., and its affiliates, accounted for approximately 9%, 15% and 31% of total net sales in 2015, 2014 and 2013, respectively.
8
Sales, Marketing and Service
We sell our products worldwide through direct sales and service offices, value-added resellers and independent representatives located around the world. ESI has direct sales and service personnel in Oregon, California and several other states; China, Japan, Korea, Singapore and Taiwan in Asia; and France, Germany and the United Kingdom in Europe. We serve select customers in Asia, the Americas, Europe and additional countries through manufacturers’ representatives.
We have a substantial base of installed products in use by leading microelectronics and semiconductor manufacturers. We emphasize strong working relationships with these customers to meet their needs for additional systems and to facilitate the successful development and sale of new products to these customers.
We generally employ service personnel wherever we have a significant installed base. We offer a variety of warranty, maintenance and parts replacement programs to support the requirements of our customers’ high-volume manufacturing environments.
Backlog
Backlog consists of purchase orders for products and spare parts that we expect to ship within 12 months and service contracts for performance generally within 24 months. Backlog does not include deferred system revenue. Backlog was $36.5 million at March 28, 2015 compared to $27.4 million at March 29, 2014, representing an increase of 33% primarily as a result of increased orders in the fourth quarter of 2015 compared to the fourth quarter of 2014. Our stated backlog is not necessarily indicative of sales for any specific future period, because of possible order cancellations or deferrals, shipping or acceptance delays, nor does backlog represent any assurance that we will realize a profit from filling the orders.
Research, Development and Technology
We believe that our ability to compete effectively and deliver customer solutions depends, in part, on our ability to maintain and expand our expertise in core technologies and product applications. Our primary core competencies and capabilities include:
• | laser-material interaction; |
• | high-speed, micron-level motion control systems; |
• | precision optics; |
• | proprietary laser technology; |
• | laser power control; |
• | image processing and optical character recognition; |
• | high-speed, small parts handling; |
• | real-time production-line electronic measurement; |
• | real-time operating systems; and |
• | systems design and integration. |
Our research and development expenditures for 2015, 2014 and 2013 were $35.2 million (22% of net sales), $37.8 million (21% of net sales) and $37.2 million (17% of net sales), respectively.
Competition
Our markets are dynamic, cyclical and highly competitive. The principal competitive factors in our markets are total cost of ownership, product performance, ease of use, reliability, service, technical support, product roadmap, price, proprietary technology, manufacturing responsiveness and relationships with customers. We believe that our products compete favorably with respect to these factors. Some of our competitors have greater financial, engineering and manufacturing resources and larger distribution networks than we do. Some of our customers or potential customers develop, or have the ability to develop, manufacturing equipment similar to our products. Competition in our markets may intensify and our technological advantages may be reduced or lost as a result of technological advances by competitors or customers or changes in electronic device processing technology.
Our component processing products compete with laser systems provided by Via Mechanics, Ltd., EO Technics Co. Ltd., LPKF Laser & Electronics AG, Mitsubishi Electric Corporation, Orbotech Ltd., InnoLas Systems GmbH, DISCO Corporation, Laser Solutions, Inc., Quantel USA, Inc., HOYA Corporation, Humo Laboratory Ltd. as well as component manufacturers that develop systems for internal use. Our Micromachining Products compete with laser and laser systems provided by Hans Laser, HG Laser and several Chinese and Korean companies who compete within their local markets.
9
Manufacturing and Supply
Our primary production facilities are located in Singapore; Portland, Oregon; Chelmsford, Massachusetts; Klamath Falls, Oregon; and Wuhan, China. Our Singapore facility is our primary systems manufacturing facility and manufactures certain IP, SP, CP and MP products. The Portland facility primarily provides advanced manufacturing and prototype capability. The Klamath Falls facility manufactures CP consumable products. The Chelmsford facility has been the primary site for manufacturing our Semiconductor Systems business wafer trim and circuit trim products. In March 2015, we announced the consolidation and closure of the Chelmsford plant. As a part of the closure, we will be transitioning the manufacturing of wafer trim and circuit trim products to our other facilities by the end of 2016. Our Singapore, Wuhan and Chelmsford operations are located in leased facilities. As we continue our efforts to streamline the organization and improve efficiencies, we expect a growing percentage of final systems will be shipped from Singapore and China.
We use qualified manufacturers to supply many components and sub-system modules for our products. Our systems use high-performance computers, peripherals, lasers and other components from various suppliers. Some of the components we use are obtained from a single source or a limited group of suppliers. An interruption in the supply of a particular component would have a temporary adverse impact on us. We believe our relationships with our suppliers are good.
Patents and Other Intellectual Property
We have a policy of seeking patents, when appropriate, on inventions relating to new products and improvements that are discovered or developed as part of our ongoing research, development and manufacturing activities. We owned 383 United States patents and 690 patents issued outside of the United States as of March 28, 2015. Additionally, as of March 28, 2015, we had 73 patent applications pending in the United States and 325 patent applications pending outside of the United States. Although our patents are important, we believe that the competitiveness of our products also depends on the technical competence and innovation of our employees.
We rely on copyright protection for our proprietary software. We also rely upon trade secret protection for our confidential and proprietary information. Others may independently develop substantially equivalent proprietary information and techniques, and we may be unable to meaningfully protect our trade secrets.
Employees
As of March 28, 2015, we employed 739 people of whom 695 were permanent and 44 were temporary. Many of our employees are highly skilled, and our success will depend in part upon our ability to attract and retain such employees, who are in great demand. We have never had a work stoppage or strike, and no employees are represented by a labor union or covered by a collective bargaining agreement. We consider our employee relations to be good.
Environmental Compliance
During fiscal 2015, we retained ISO 14001 certification via Surveillance Assessment for our environmental management system for our Portland, Oregon operations. We do not expect compliance with international, federal, state and local provisions that have been enacted or adopted related to the discharge of materials into the environment or otherwise relating to protection of the environment to have a material effect on our capital expenditures, earnings or competitive position.
Item 1A. Risk Factors
The statements contained in this report that are not statements of historical fact, including without limitation statements containing the words “believes,” “expects” and similar words, constitute forward-looking statements that are subject to a number of risks and uncertainties. From time to time, we may make other forward-looking statements. Investors are cautioned that such forward-looking statements are subject to an inherent risk that actual results may differ materially. The following information highlights some of the factors that could cause actual results to differ materially from the results expressed or implied by our forward-looking statements. Forward-looking statements should be considered in light of these factors. Factors that may result in such variances include, but are not limited to, the following:
Risks Related to Our Competition and Customers
Volatility of Our Customers’ Industries
Our business is dependent upon the capital expenditures of manufacturers of microelectronics, semiconductors, computers, wireless communications and other electronic products. The capital equipment market for microelectronics, semiconductor, and consumer electronics manufacturers has historically been characterized by sudden and severe cyclical variations in product supply and demand due to a number of factors including capacity utilization, timing of customers’ new
10
product introductions and demand for their products, inventory levels relative to demand and access to affordable capital. The timing, severity and duration of these market cycles are difficult or impossible to predict. As a result, business levels can vary significantly from quarter to quarter or year to year. Significant volatility in investment cycles in the market for microelectronics, PCB's and semiconductors used in electronic devices or in the market for consumer electronics reduce demand for our products and may materially and adversely affect our business, financial condition and results of operations. The degree of the impact of any downturn on our business depends on a number of factors, including: the strength of the global and United States economies; the overall level of demand for consumer electronics products; the stability of global financial systems; and the overall health of the microelectronics, semiconductor, and consumer electronics industries.
Expansion into New Markets
Our future success depends in large part on our successful penetration of new markets adjacent to our existing markets and of the Chinese market for lower cost systems. These markets are new to us and our success is dependent on our displacing entrenched competitors who are familiar with these markets and are known to customers. There is no assurance that we will be successful in penetrating these new markets significantly or at all. If we fail to successfully penetrate these markets our business, financial condition and results of operations could be materially and adversely affected.
Highly Competitive Markets
We face substantial competition from established competitors throughout the world, some of which have greater financial, engineering, manufacturing and marketing resources than we do. Those competitors with greater resources may, in addition to other things, be able to better withstand periodic downturns, compete more effectively on the basis of price and technology, or more quickly develop enhancements to, and new generations of, products that compete with the products we manufacture and market. New companies may enter the markets in which we compete, or industry consolidation may occur, further increasing competition in those markets. We have also experienced new entrants to our markets offering aggressive price and payments terms in an attempt to gain market share. Some competitors, particularly in China, also develop low cost products employing processes or technology developed by us. We believe that to be competitive we must continue to expend significant financial resources in order to, among other things, invest in new product development and enhancements. We may not be able to compete successfully in the future and increased competition may result in price reductions, reduced profit margins and loss of market share.
Revenues are Largely Dependent on Few Customers
We depend on a few significant customers for a large portion of our revenues. In 2015, our top ten customers accounted for approximately 40% of total net sales. We anticipate that sales of our products to a relatively small number of customers will continue to account for a significant portion of our revenues. Consolidation between customers, changes in technologies or solutions used by customers, changes in products manufactured by customers or in end-user demand for those products, selection of suppliers other than us, customer bankruptcies or customer departures from their respective industries all may result in even fewer customers accounting for a high percentage of our revenue and reduced demand from any single major customer. Also, business levels with several of our top customers are dependent on our winning new designs and features each product cycle, and there is no guarantee of future business based on past design wins. Furthermore, none of our customers have any long-term obligation to continue to buy our products or services and may therefore delay, reduce or cease ordering our products or services at any time. The cancellation, reduction or deferral of purchases of our products by even a single customer could significantly reduce our revenues in any particular quarter. For example, revenues from Apple, Inc. decreased from $27 million in 2014 to $15 million in 2015. If we were to lose any of our significant customers or suffer a material reduction in their purchase orders, revenue could decline and our business, financial condition and results of operations could be materially and adversely affected.
Increased Price Pressure
We have experienced and continue to experience pricing pressure in the sale of our products, from both competitors and customers. Pricing pressures typically have become more intense during cyclical downturns when competitors seek to maintain or increase market share, reduce inventory or introduce more technologically advanced products or lower cost products. In addition, we may agree to pricing concessions or extended payment terms with our customers in connection with volume orders or to improve cost of ownership in highly competitive applications. Our business, financial condition, margins or results of operations may be materially and adversely affected by competitive pressure and intense price-based competition.
Revenues are Largely Based on the Sale of a Small Number of Product Units
We derive a substantial portion of our revenue from the sale of a relatively small number of products. Accordingly, our revenues, margins and other operating results could fluctuate significantly from quarter to quarter depending upon a variety of factors in addition to those described above, including:
• | changes in the timing of orders and terms or acceptance of product shipments by our customers; |
• | changes in the mix of products and services that we sell; |
11
• | timing and market acceptance of our new product introductions; and |
• | delays or problems in the planned introduction of new products, or in the performance of any such products following delivery to customers. |
As a result of these risks, we believe that quarter-to-quarter comparisons of our revenue and operating results may not be meaningful, and that these comparisons may not be an accurate indicator of our future performance.
Risks Related to Our Supply Chain and Production
Variability of Production Capacity
To meet rapidly changing demand in the industries we serve, we must effectively manage our resources and production capacity. During periods of decreasing demand for our products, we must be able to appropriately align our cost structure with prevailing market conditions and effectively manage our supply chain. Our ability to rapidly and effectively reduce our cost structure in response to such downturns is limited by the fixed nature of many of our expenses in the near term and by our need to continue our investment in next-generation product technology and to support and service our products. Conversely, when upturns occur in the markets we serve, we may have difficulty rapidly and effectively increasing our manufacturing capacity or procuring sufficient materials to meet sudden increases in customer demand that could result in the loss of business to our competitors and harm to our relationships with our customers. If we are not able to timely and appropriately adapt to changes in our business environment, our business, financial condition or results of operations may be materially and adversely affected.
Reliance on Critical Suppliers
We use a wide range of components from numerous suppliers in the manufacture of our products, including custom electronic, laser, optical and mechanical components. We generally do not have guaranteed supply arrangements with our suppliers. We seek to reduce the risk of production and service interruptions and shortages of key parts by selecting and qualifying alternative suppliers for key parts, monitoring the financial stability of key suppliers and maintaining appropriate inventories of key parts. Although we make reasonable efforts to ensure that parts are available from multiple suppliers, some key parts are available only from a single supplier or a limited group of suppliers in the short term. In addition, some of the lasers we use in our products are difficult to manufacture, and as a result we may not receive an adequate supply of lasers in a timely fashion to fill orders. Operations at our suppliers’ facilities are subject to disruption or discontinuation for a variety of reasons, including changes in business relationships, competitive factors, financial difficulties, work stoppages, fire, natural disasters or other causes. Any such disruption or discontinuation to our suppliers’ operations could interrupt or reduce our manufacturing activities and delay delivery of our products, any or all of which could materially and adversely affect our results of operations. In addition, when markets recover from economic downturns, there is a heightened risk that one or more of our suppliers may not be able to meet our increased demand requirements, adversely impacting our ability to fulfill orders and win business with our customers.
Utilization of Contract Manufacturers
We have arrangements with contract manufacturers to complete the manufacturing of certain of our products or product subcomponents. Any significant interruption in our contract manufacturers’ ability to provide manufacturing services to us as a result of contractual disputes with us or another party, labor disruptions, financial difficulties, natural disasters, delay or interruption in the receipt of inventory, customer prioritization or other causes could result in reduced manufacturing capabilities or delayed deliveries for certain of our products, any or all of which could materially and adversely affect our results of operations.
Charges for Excess or Obsolete Inventory
One factor on which we compete is the ability to ship products on schedules required by customers. In order to facilitate timely shipping, management forecasts demand, both in type and amount of products, and these forecasts are used to determine inventory to be purchased. We also order materials based on our technology roadmap, which represents management’s assessment of technology that will be utilized in new products that we develop. Certain types of inventory, including lasers and optical equipment, are particularly expensive and may only be used in the production of a single type of product. If actual demand is lower than forecast with respect to the type or amount of products actually ordered, or both, our inventory levels may increase. As a result, there is a risk that we may have to incur material accounting charges for excess and obsolete inventory if inventory cannot be used, which would negatively affect our financial results. Also, if we alter our technology or product development strategy, we may have inventory that may not be usable under the new strategy, which may also result in material accounting charges. For example, during 2015, we recorded approximately $1.0 million of charges in cost of sales for inventory written-off associated with discontinued products.
12
Uncertainties Resulting from Conflict Minerals Regulation
On August 22, 2012, the SEC adopted a new rule requiring disclosures of specified minerals, known as conflict minerals, that are necessary to the functionality or production of products manufactured or contracted to be manufactured by companies filing public reports. The rule requires a disclosure report to be filed annually with the SEC and this report will require companies to perform due diligence, disclose, and report whether such minerals originate from the Democratic Republic of Congo or an adjoining country. The new rule could affect sourcing at competitive prices and availability in sufficient quantities of certain minerals used in the manufacture of our products, including tantalum, tin, gold, and tungsten. The number of suppliers who provide conflict-free minerals may be limited. In addition, there may be material costs associated with complying with the disclosure requirements, such as costs related to determining the source of certain minerals used in our products, as well as costs of possible changes to products, processes, or sources of supply as a consequence of such verification activities. Since our supply chain is complex, we may not be able to sufficiently verify the origins of the relevant minerals used in our products through the due diligence procedures that we implement, which may harm our reputation. In addition, we may encounter challenges to satisfy those customers who require that all of the components of our products be certified as conflict-free, which could place us at a competitive disadvantage if we are unable to do so.
Risks Related to Our Organization
Operating a Global Business
International shipments accounted for 86% of net shipments in 2015, with 76% of our net shipments to customers in Asia. We expect that international shipments will continue to represent a significant percentage of net sales in the future. We also have significant foreign operations, including manufacturing facilities in Singapore and China, research and development facilities in Canada, France and Taiwan, and sales and service offices in various countries. Under our globalization strategy, we intend to increase our foreign operations in the future. Our non-U.S. sales, purchases and operations are subject to risks inherent in conducting business abroad, many of which are outside our control, including the following:
• | periodic local or geographic economic downturns and unstable political conditions; |
• | price and currency exchange controls; |
• | fluctuation in the relative values of currencies; |
• | difficulty in repatriating money, whether as a result of tax laws or otherwise; |
• | difficulties protecting intellectual property; |
• | compliance with labor laws and other laws governing employees; |
• | local labor disputes; |
• | shipping delays and disruptions; |
• | unexpected changes in trading policies, regulatory requirements, tariffs and other barriers; and |
• | difficulties in managing a global enterprise, including staffing, collecting accounts receivable, and managing suppliers, distributors and representatives. |
Our business and operating results could also be impacted, directly or indirectly, by natural disasters, outbreaks of infectious disease, military action, international conflicts, terrorist activities, civil unrest and associated political instability. Many of our facilities, including our Portland, Oregon headquarters, are in areas with known earthquake risk. Some of these events or circumstances may also result in heightened security concerns with respect to domestic and international travel and commerce, which may further affect our business and operating results. In particular, due to these uncertainties, we are subject to the following additional risks:
• | future tightening of immigration controls may adversely affect the residence status of non-U.S. engineers and other key technical employees in our U.S. facilities or our ability to hire new non-U.S. employees in such facilities; |
• | more frequent instances of shipping delays; |
• | demand for our products may not increase or may decrease; and |
• | our customers or suppliers may experience financial difficulties or cease operations. |
Implementation and Modification of Globalization Strategy
We are continuing to implement and expand our globalization strategy in which we are moving certain operational resources and capabilities to different countries in Asia to be closer to many of our significant customers to reduce costs and to develop low cost follow-on solutions to our products. As part of this strategy we acquired Topwin, a Chinese manufacturer of laser-based systems, in January 2015 to gain entry into the low-cost solutions market in China. We believe this strategy will enhance customer relationships, improve our responsiveness, reduce our manufacturing costs for certain products and allow us to compete with low cost competitors who develop systems employing processes developed by us. We opened a manufacturing facility in Singapore in the fourth quarter of 2010, which manufactures certain IP, MP, SP and CP products and is now our primary system manufacturing facility.
13
Our globalization strategy is subject to a variety of complexities and risks, many of which may divert a substantial amount of management’s time. These risks include:
• | challenges in designing facilities that can be scaled for future expansion, replicating current processes and bringing new facilities up to full operation; |
• | unpredictable costs, redundancy costs and cost overruns for developing facilities and acquiring equipment; |
• | building local management teams, technical personnel and other staff for functions that we have not previously conducted outside of the United States; |
• | technical obstacles such as poor production or process yield and loss of quality control during the ramp of a new facility; |
• | re-qualifications and other procedures that may be required by our customers; |
• | our ability to bring up local suppliers to meet our quality and cycle-time needs; |
• | our ability to reduce costs in the United States as we add costs elsewhere; |
• | rapidly changing business conditions that may require plans to be changed or abandoned before they are fully implemented; and |
• | challenges posed by distance and by differences in language and culture. |
These and other factors could delay the continuing development, expansion and implementation of our strategy, as well as impair our gross margins, delay shipments and deliveries, cause us to lose sales, require us to write off investments already made, damage our reputation and harm our business, financial condition and results of operations. If we decide to change our globalization strategy, we may incur charges for certain costs incurred.
Acquisitions and Divestitures
We may make acquisitions of, or significant investments in, other businesses with complementary products, services or technologies, such as our June 2012 acquisition of Eolite Systems, May 2013 acquisition of the Semiconductor Systems business from GSI Group, Inc. and our January 2015 acquisition of Topwin. Acquisitions involve numerous risks, many of which are unpredictable and beyond our control, including:
• | difficulties and increased costs in connection with integration of personnel, operations, technologies and products of the acquired businesses; |
• | difficulties in implementation of our enterprise resource planning (ERP) system into the acquired company’s operations; |
• | diversion of management’s attention from other operational matters; |
• | the potential loss of key employees of the acquired company; |
• | lack of synergy or inability to realize expected synergies resulting from the acquisition; |
• | the inability to successfully enter new markets expected to result from the acquisition; |
• | acquired assets becoming impaired as a result of technological advancements or worse-than-expected performance by the acquired company; |
• | difficulties establishing satisfactory internal controls and accounting practices at the acquired company; |
• | risks related to the culture, language, and local practices of the acquired company; |
• | risks and uncertainties relating to the performance of the combined company following the transaction; and |
• | acquiring unanticipated liabilities for which we will not be indemnified. |
Furthermore, the accounting for an acquisition could result in significant charges resulting from amortization or write-off of intangible assets and goodwill we acquire. Our inability to effectively manage these risks could result in our inability to realize the anticipated benefits of an acquisition on a timely basis, or at all, and materially and adversely affect our business, financial condition and results of operations. In addition, all acquisition transaction costs must be expensed as incurred rather than capitalized, which may have a material adverse effect on our results of operations.
The means by which we finance an acquisition may also significantly affect our business or the value of the shares of our common stock. If we issue common stock to pay for an acquisition, the ownership percentage of our existing shareholders will be diluted and the value of the shares held by our existing shareholders could be reduced. If we use cash on hand to pay for an acquisition, the payment could significantly reduce the cash that would be available to fund our operations or to use for other purposes. If we borrow funds in connection with an acquisition, we would be required to use cash to service the debt and to comply with financial and other covenants.
We may from time to time also make strategic investments in development stage companies. Investments in development stage companies are subject to a high degree of risk. We could lose all or a portion of our investment in any such company or could be required to recognize an impairment charge with respect to our investment. For example, in 2014 and 2015 we recognized a loss totaling $14 million on our investment in OmniGuide, Inc., due to a lender of OmniGuide exercising its right to convert the obligations owed to it into 100% of OmniGuide's outstanding equity.
14
Hiring and Retention of Personnel
Our continued success depends in part upon the services of our key managerial, financial and technical personnel. The loss of key personnel, or our inability to attract, assimilate and retain qualified personnel, could result in the loss of customers, inhibit our ability to operate and grow our business and otherwise have a material adverse effect on our business and results of operations. We have previously had to, and may in the future have to, impose salary reductions on employees during economic downturns in an effort to maintain our financial position. On several occasions in recent years executives and other employees have received limited or no annual bonuses due to our financial performance relative to the performance parameters in our annual bonus plans. These events may have an adverse effect on employee loyalty and may make it more difficult for us to attract and retain key personnel. Competition for qualified personnel in the industries and locations in which we compete for talent is intense, and we may not be successful in attracting and retaining qualified personnel. We may incur significant costs in our efforts to recruit and retain key personnel, which could affect our financial position and results of operations.
Our ability to retain key personnel and execute our strategy may also be adversely affected by the transition to a new CEO. In 2014 Edward C. Grady became our President and Chief Executive Officer, replacing Nicholas Konidaris who held the position since 2004.
Risks Related to Technology
Markets Characterized by Rapid Technological Change
The markets for our products are characterized by rapid technological change and innovation, frequent new product introductions, changes in customer requirements and evolving industry standards. Our future performance will depend on the successful development, introduction and market acceptance of new and enhanced products that address technological changes and the requirements of current and potential customers. The development of new, technologically advanced products is a complex and uncertain process, requiring high levels of innovation and highly skilled engineering and development personnel, as well as the accurate anticipation of technological and market trends. We cannot assure you that we will be able to identify, develop, manufacture, market or support new or enhanced products successfully, if at all, or on a timely basis. The introduction by us or by our competitors of new or enhanced products, or alternative technologies, may cause our customers to defer, change or cancel orders for our existing products or cease purchasing our products altogether. Further, we cannot assure that our new products will gain timely market acceptance or that we will be able to respond effectively to product announcements by competitors, technology changes or emerging industry standards. If we are unable to develop new or enhanced products to address product or technology changes or new industry standards on a timely basis or at all, or if our new or enhanced products are not accepted by the market, or if our customers adopt alternative technologies, our business, financial condition and results of operations may be adversely affected.
Need to Invest in Research and Development
Our industry is characterized by the need for continued investment in research and development. Because of intense competition in the industries in which we compete, if we were to fail to invest sufficiently in research and development, our products could become less attractive to our current and potential customers or obsolete, and our business and financial condition could be materially and adversely affected. As a result of our need to maintain our spending levels in this area, our operating results could be materially harmed if our net sales decline. In addition, as a result of our emphasis on research and development and technological innovation, our operating costs may increase in the future, and research and development expenses may increase as a percentage of total operating expenses and as a percentage of net sales.
Need to Broaden our Marketing and Channel Capability
The laser microfabrication industry is comprised of broad set of markets and applications and represents significant opportunities for growth. In order to access these opportunities; we need to broaden our approach from customer centric to market based. This will require the hiring, development, and application of new marketing capability and channel access. Our ability to successfully access and compete in these broader markets will be partially dependent on our development of these new skills and capabilities. Our inability to do so would harm our business and adversely affect our revenues and profitability.
Products are Highly Complex
Our products are highly complex, and our extensive product development, manufacturing and testing processes may not be adequate to detect all defects, errors, failures and quality issues that could impact customer satisfaction or result in claims against us. As a result, we may have to replace certain components or provide remediation in response to the discovery of defects in products after they are shipped. The occurrence of any defects, errors, failures or quality issues could result in cancellation of orders, product returns, diversion of our resources, legal actions by our customers and other losses to us or to
15
our customers. These occurrences could also result in the loss of, or delay in, market acceptance of our products, loss of sales and increased expenses and warranty costs, which would harm our business and adversely affect our revenues and profitability.
Risks Related to Legal Matters
Protection of Proprietary Rights – Generally
Our success depends significantly upon the protection of our proprietary rights. We attempt to protect our proprietary rights through patents, copyrights, trademarks, maintenance of trade secrets and other measures, including entering into confidentiality agreements. We incur substantial costs to obtain and maintain patents and to defend our intellectual property rights. We rely upon the laws of the United States and foreign countries where we develop, manufacture or sell our products to protect our proprietary rights. We may not be successful in protecting these proprietary rights, these rights may not provide the competitive advantages that we expect, or other parties may challenge, invalidate or circumvent these rights.
Protection of Proprietary Rights – Foreign Jurisdictions
Our efforts to protect our intellectual property may be less effective in some foreign countries where intellectual property rights are not as well protected as in the United States. Many United States companies have encountered substantial problems in protecting their proprietary rights against infringement in foreign countries. If we fail to adequately protect our intellectual property in these countries, it could be easier for our competitors to sell competing products in foreign countries, which could result in reduced sales and gross margins.
Intellectual Property Infringement Claims
Several of our competitors hold patents covering a variety of technologies, applications and methods of use similar to some of those used in our products. While we attempt in our designs to avoid patent infringement, from time to time we and our customers have received correspondence from our competitors claiming that some of our products, as used by our customers, may be infringing one or more of these patents. Competitors or others have in the past and may in the future assert infringement claims against our customers or us with respect to current or future products or uses, and these assertions may result in costly litigation or require us to obtain a license to use intellectual property rights of others. If claims of infringement are asserted against our customers, those customers may seek indemnification from us for damages or expenses they incur.
If we become subject to infringement claims, we will evaluate our position and consider the available alternatives, which may include seeking licenses to use the technology in question or defending our position. These licenses, however, may not be available on satisfactory terms or at all. If we are not able to negotiate the necessary licenses on commercially reasonable terms or successfully defend our position, our financial condition and results of operations could be materially and adversely affected.
We also defend our patent and intellectual property portfolio. We initiated litigation in 2014 against Humo Laboratory, LTD. in Japan and against Eo Technics Co., Ltd., in South Korea in May 2014 for infringement of key patents. There is no assurance that this litigation will be successful, and we may incur significant legal fees to prosecute these claims.
Tax Audits and Changes in Tax Law
We are periodically under audit by United States and foreign tax authorities and may have exposure to additional tax liabilities as a result. Significant judgment is required in determining our provision for income and other tax liabilities. Although we believe our tax estimates are reasonable, the final outcome of tax audits and the impact of changes in tax laws or the interpretation of tax laws could result in material differences from what is reflected in historical income tax accruals. If additional taxes are assessed as a result of an examination, a material effect on our financial results, tax positions or cash flows could occur in the period or periods in which the determination is made.
We currently benefit from a tax incentive program in Singapore pursuant to which we pay no Singapore income tax with respect to our manufacturing income. The incentive commenced on July 1, 2006 and will continue through June 30, 2016 assuming we are able to satisfy applicable requirements. The Company has failed to meet certain of the associated requirements in the past, however has obtained a waiver for certain periods. There is no assurance we will be able to satisfy these requirements and failure to meet such requirements may lead to reduction in future or past tax benefits. The Company believes that it is more likely than not the Company will continue to receive the associated tax incentives and there is no indication that past benefits received would be rescinded.
Legal Proceedings
From time to time we are subject to various legal proceedings, including breach of contract claims and claims that involve possible infringement of patent or other intellectual property rights of third parties or by third parties. It is inherently
16
difficult to assess the outcome of litigation matters, and there can be no assurance that we will prevail in any litigation. Any litigation could result in substantial cost and diversion of management’s attention, which by itself could have a material adverse effect on our financial condition and results of operations. Further, adverse determinations in such litigation could result in loss of our property rights, subject us to significant liabilities, require us to seek licenses from others or prevent us from manufacturing or selling our products, any of which could materially adversely affect our business, financial condition, results of operations or cash flows.
Provisions Restricting Our Acquisition
Our articles of incorporation and bylaws contain provisions that could make it harder for a third party to acquire us without the consent of our Board of Directors. In addition, the Oregon Control Share Act and the Oregon Business Combination Act limit the ability of parties who acquire a significant amount of voting stock to exercise control over us. These provisions may have the effect of lengthening the time required for a person to acquire control of us through a proxy contest or the election of a majority of our Board of Directors, may deter efforts to obtain control of us and may make it more difficult for a third party to acquire us without negotiation. These provisions may apply even if the offer may be considered beneficial by our shareholders.
Risks Related to Financial Matters
Liquidity
We may require greater working capital to operate than similar size businesses in many other industries. At March 28, 2015, we had working capital of $127 million, including $58 million in cash and short-term investments. We have experienced negative operating cash flows each quarter since September 2013. If revenues were to grow, we would expect increased working capital needs for receivables and inventory. While we have a credit facility in place, the level of availability and cost are based on maintaining certain levels of qualified receivables and domestic cash. As a result, if either of these balances decreases sufficiently, our ability to access the facility may be limited or costs may be higher. In addition, if we fail to meet the covenants in our credit facility, including the tangible net worth covenant, the facility may not be available to us. If we were to require additional financing, there is no assurance it would be available on terms that are acceptable to us or at all. In addition, if we were to obtain financing by selling stock or convertible securities, the ownership of existing shareholders would be diluted. If we were to require additional financing and were unable to do so on acceptable terms or at all, our business and our ability to continue operations could be materially and adversely affected.
Unfavorable Currency Exchange Rate Fluctuations
Currency exchange rate fluctuations could have an adverse effect on our sales and results of operations and we could experience losses with respect to forward exchange contracts into which we may enter. Unfavorable currency fluctuations could require us to increase prices to foreign customers, which could result in lower net sales by us to those customers. Alternatively, if we do not adjust the prices for our products in response to unfavorable currency fluctuations, our results of operations could be materially and adversely affected. In addition, some of our foreign sales are denominated in the currency of the country in which these products are sold and the currency we receive in payment for such sales could be less valuable at the time of receipt as a result of exchange rate fluctuations. From time to time, we enter into forward exchange contracts to hedge the value of accounts receivable primarily denominated in euros and other currencies. However, we cannot be certain that our efforts will be adequate to protect us against significant currency fluctuations or that such efforts will not expose us to additional exchange rate risks, which could adversely affect our results of operations.
Fluctuations in Effective Tax Rate
As a global company, we are subject to taxation in the United States and numerous foreign jurisdictions. Our effective tax rate is subject to fluctuation from one period to the next because the income tax rates for each year are a function of many factors, including: (a) taxable income levels and the effects of a mix of profits (losses) earned by ESI and our subsidiaries in numerous tax jurisdictions with a broad range of income tax rates; (b) our ability to utilize deferred tax assets; (c) taxes, refunds, interest or penalties resulting from tax audits; (d) the magnitude of various credits and deductions as a percentage of total taxable income; (e) the ability to maintain our Pioneer Status in Singapore; and (f) changes in tax laws or the interpretation of such tax laws. In addition, we currently have a valuation allowance against domestic tax assets as a result of historic losses recorded in the United States. Changes in the mix of these items may cause our effective tax rate to fluctuate between periods, which could have a material adverse effect on our financial position and results of operations.
17
Impairment of Goodwill, Intangible and Long-Lived Assets
We held a net total of $9.0 million in acquired intangible assets and $7.7 million in goodwill at March 28, 2015. We review our acquired intangible assets for impairment when events or changes in circumstances indicate the carrying value may not be recoverable. In the fourth quarter of 2015 we realigned our products into two segments as a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business. This reorganization required the Company to reassign its reported goodwill to the new reporting units based on the relative fair value of the respective reporting units. The carrying value of goodwill by reporting unit prior to March 28, 2015 was approximately $7.7 million for Topwin, $6.3 million for Component Processing and $1.6 million for Micromachining. We perform a goodwill impairment analysis at the reporting unit level, which is defined as one level below our operating segments at least annually or between annual tests if an event occurs or circumstances change that would more likely than not reduce the fair value below the carrying value of the reporting unit.
We performed a review of our acquired definite-lived intangible assets in the fourth quarter of 2015, including a review for impairment based on certain triggering events and no significant impairments of intangible assets were identified.
We performed our annual goodwill impairment analysis based on the carrying value of the reorganized reporting units. Carrying value was determined based on the Company's allocation of assets and liabilities to the reporting units using reasonable assumptions. Based on the analysis, which is not complete, we determined that a goodwill impairment loss is probable for our Component Processing and Micromachining reporting units and have recognized our best estimate of that loss. We recorded an estimated non-cash goodwill impairment charge of $7.9 million in the fourth quarter of 2015 to write down the goodwill to its implied fair value as of March 28, 2015. Should the performance of our Topwin reporting unit not meet our expectations, further impairment to goodwill may be triggered.
In addition, certain of our long-lived assets such as machinery and equipment may experience impairment in their value as a result of such events as the introduction of new products, changes in technology or changes in customer demand patterns. We depreciate our machinery and equipment at levels we believe are adequate; however, there can be no assurance that there will not be a future impairment that may have a material impact on our business, financial condition and results of operations.
Stock Price Volatility
The market price of our common stock has fluctuated widely. During fiscal 2015, our stock price fluctuated between a high of $10.01 per share and a low of $5.98 per share, and subsequent to the end of the fiscal year and prior to June 18, 2015 has been as low as $5.26 per share. Consequently, the current market price of our common stock may not be indicative of future market prices, and we may be unable to sustain or increase the value of an investment in our common stock. Factors affecting our stock price, many of which are outside of our control, may include:
• | variations in operating results from quarter to quarter; |
• | changes in earnings estimates by analysts or our failure to meet analysts’ expectations; |
• | changes in the market price per share of our public company customers; |
• | market conditions in the consumer electronics, semiconductor and other industries into which we sell products; |
• | general economic conditions; |
• | political changes, hostilities or natural disasters; |
• | low trading volume of our common stock; |
• | change in our dividend policy; |
• | the number of analysts covering our common stock; |
• | stock price volatility based on one or a few investors buying or selling a large number of shares over days or weeks, due to relatively low volumes of trading in our stock; and |
• | the number of firms making a market in our common stock. |
In addition, the stock market has experienced significant price and volume fluctuations in recent years. These fluctuations have particularly affected the market prices of the securities of high-technology companies like ours. These market fluctuations could adversely affect the market price of our common stock.
Impairment of Investments
Our investment portfolio is primarily comprised of commercial paper, debt securities issued by U.S. governmental agencies and municipal debt securities. These investments are intended to be highly liquid and low risk. If the markets for these securities were to deteriorate for any reason, including as a result of a downgrade in the credit rating of U.S. government securities, the liquidity and value of these investments could be negatively affected, which could result in impairment charges. Any such impairment charges may have a material impact on our financial condition and results of operations.
18
If we fail to maintain an effective system of internal controls, we may not be able to accurately report our financial results or prevent fraud and our stock price may be adversely affected.
Effective internal controls are necessary for us to provide reliable financial reports and effectively prevent fraud. If we cannot provide reliable financial reports or prevent fraud, our operating results could be harmed.
We have identified material weaknesses in our internal control over financial reporting related to the accounting and disclosure of complex, judgmental accounting matters and non-routine transactions. The matters involving internal controls and procedures that our management considered to be material weaknesses included the risk assessment and certain process and review level controls associated with complex and non-routine transactions affecting goodwill, disclosures related to the Topwin acquisition, disclosures related to operating segments, presentation of service revenue and associated cost of sales on the statements of operations. See “Item 9A-Controls and Procedures-Management’s Report on Internal Control Over Financial Reporting.”
The Company is in the process of identifying and implementing certain changes in our internal controls to address the material weaknesses. Specifically, the Company is documenting, implementing, and assessing necessary changes in the risk assessment process and in the design of the controls and identifying additional procedures and expertise required to ensure effective management and technical review of significant, complex, and non-routine transactions.
Management believes that it will identify and implement additional controls that will remediate the material weaknesses discussed above. However, no assurance can be given that these changes will remediate the material weaknesses until such time that the controls have operated for a sufficient period of time and their operating effectiveness has been tested.
The requirements of Section 404 of the Sarbanes-Oxley Act are ongoing and also apply to future years. We expect that our internal control over financial reporting will continue to evolve as our business develops. Although we are committed to continue to improve our internal control processes and we will continue to diligently and vigorously review our internal control over financial reporting in order to ensure compliance with the Section 404 requirements, any control system, regardless of how well designed, operated and evaluated, can provide only reasonable, not absolute, assurance that its objectives will be met. Therefore, we cannot be certain that in the future additional material weaknesses or significant deficiencies will not exist or otherwise be discovered. If our efforts to remediate the weaknesses identified are not successful or if other deficiencies occur, these weaknesses or deficiencies could result in misstatements of our results of operations, additional restatements of our consolidated financial statements, a decline in our stock price and investor confidence, or other material effects on our business, reputation, results of operations, financial condition or liquidity.
Item 1B. Unresolved Staff Comments
None.
Item 2. Properties
Our executive and administrative headquarters, which houses our primary engineering and marketing functions, advanced manufacturing capability for new products, and manufacturing of select legacy products are located in a three-building complex with 197,838 square feet of space on 10.15 acres in Portland, Oregon. Additionally, our component products consumables are manufactured at a 53,000 square foot plant on 31 acres in Klamath Falls, Oregon. We own all of these buildings. We believe the productive capacity of these facilities to be adequate and suitable for the requirements of our business for the foreseeable future.
Our primary system manufacturing facilities are located in leased facilities in Singapore. We lease approximately 26,000 square feet of facilities in Singapore where we manufacture certain Micromachining and Component Processing products. We also lease approximately 32,500 square feet of facilities in Chelmsford, Massachusetts that have been used primarily for engineering and manufacture of our Semiconductor Systems products and a 23,000 square foot facility in Sunnyvale, California that is used primarily for engineering, marketing and as a demonstration center for our microfabrication systems. We lease approximately 14,000 square feet of facilities in Wuhan, China. Additionally, we lease other office and facility space in various locations throughout the United States and various foreign countries.
In 2015, as a part of the Company’s plan to streamline its manufacturing and development activities, the Company initiated a restructuring plan to close the assembly plant and development center located in Chelmsford, Massachusetts. The manufacturing and development activities will be transitioned to other U.S. facilities by end of 2016.
19
Item 3. Legal Proceedings
In the ordinary course of business, we are involved in various legal matters, either asserted or unasserted, and investigations. In the opinion of management, ultimate resolution of these matters will not have a material effect on our consolidated financial position, results of operations or cash flows.
Item 4. Mine Safety Disclosures
Not Applicable.
20
PART II
Item 5. Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities
Common Stock Prices
Our common stock trades on the NASDAQ Stock Market under the symbol ESIO. There were approximately 443 shareholders of record as of June 22, 2015, and on that date there were 30,757,322 common shares outstanding. The closing price on June 22, 2015 was $5.48 per share.
The following table shows the high and low closing prices for our common stock as reported on the NASDAQ Stock Market for the fiscal quarters indicated:
Fiscal 2015 | High | Low | |
Quarter 1 | 10.01 | 6.68 | |
Quarter 2 | 7.70 | 5.98 | |
Quarter 3 | 7.77 | 6.13 | |
Quarter 4 | 7.88 | 6.16 | |
Fiscal 2014 | High | Low | |||||
Quarter 1 | $ | 11.63 | $ | 9.97 | |||
Quarter 2 | 12.35 | 10.61 | |||||
Quarter 3 | 12.19 | 9.59 | |||||
Quarter 4 | 11.44 | 9.04 | |||||
Equity Compensation Plan Information
Disclosures related to securities authorized for issuance under our Equity Compensation Plans are incorporated by reference into Item 12 of this annual report on Form 10-K, Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters, from our Proxy Statement for our fiscal 2015 annual meeting.
Dividends
In February 2015, the Board of Directors suspended the quarterly dividend which was adopted by the Company in December 2011. The Company paid dividends in the first three quarters of 2015 under the 2011 dividend policy. The following table summarizes the quarterly dividends declared and paid by us in 2015 and 2014:
Date Declared | Record Date | Payable Date | Amount per Share | |||||
November 18, 2014 | December 1, 2014 | December 15, 2014 | $ | 0.08 | ||||
August 21, 2014 | September 2, 2014 | September 12, 2014 | $ | 0.08 | ||||
May 15, 2014 | May 27, 2014 | June 10, 2014 | $ | 0.08 | ||||
February 13, 2014 | February 27, 2014 | March 13, 2014 | $ | 0.08 | ||||
November 7, 2013 | November 19, 2013 | December 4, 2013 | $ | 0.08 | ||||
August 8, 2013 | August 19, 2013 | September 3, 2013 | $ | 0.08 | ||||
May 14, 2013 | June 5, 2013 | June 19, 2013 | $ | 0.08 | ||||
We paid aggregate dividends of $7.3 million and $9.6 million in 2015 and 2014, respectively.
21
Stock Performance Graph
The graph below compares the cumulative 58-month total return to holders of Electro Scientific Industries, Inc. common stock with the cumulative total returns of the S&P 500 Index and the S&P Information Technology Index for the same period. The graph assumes that the value of the investment in Electro Scientific Industries, Inc. common stock and in each of the indices (including reinvestment of dividends) was $100.00 on April 03, 2010 and tracks it through March 28, 2015.
Historical stock price performance should not be relied upon as indicative of future stock price performance.
*$100 invested on 4/3/10 in stock or 3/31/10 in index, including reinvestment of dividends.
Indexes calculated on month-end basis.
Indexes calculated on month-end basis.
Cumulative Total Return1 | |||||||||||||||||
April 03, 2010 | April 2, 2011 | March 31, 2012 | March 30, 2013 | March 29, 2014 | March 28, 2015 | ||||||||||||
Electro Scientific Industries, Inc. | 100.00 | 130.28 | 115.31 | 104.31 | 96.33 | 62.02 | |||||||||||
S&P 500 | 100.00 | 115.65 | 125.52 | 143.05 | 174.31 | 196.51 | |||||||||||
S&P Information Technology Index | 100.00 | 111.88 | 134.50 | 132.99 | 167.02 | 197.27 | |||||||||||
1. Copyright© 2015 S&P, a division of McGraw Hill Financial. All rights reserved.
22
Item 6. Selected Financial Data
(In thousands, except per share data) | 2015 | 2014 | 2013 | 2012 | 2011 | ||||||||||||||
Statement of Operations Data | |||||||||||||||||||
Net sales | $ | 159,118 | $ | 181,167 | $ | 216,625 | $ | 254,229 | $ | 256,811 | |||||||||
Provision for (benefit from) income taxes | 234 | (92 | ) | 39,851 | (1,417 | ) | 390 | ||||||||||||
Net (loss) income | (43,811 | ) | (38,334 | ) | (54,716 | ) | 4,904 | 7,934 | |||||||||||
Net (loss) income per share—basic | (1.43 | ) | (1.28 | ) | (1.86 | ) | 0.17 | 0.28 | |||||||||||
Net (loss) income per share—diluted | (1.43 | ) | (1.28 | ) | (1.86 | ) | 0.17 | 0.28 | |||||||||||
Cash dividends paid per outstanding common share | 0.24 | 0.32 | 2.32 | 0.08 | — | ||||||||||||||
Balance Sheet Data | |||||||||||||||||||
Cash and cash equivalents, restricted cash, short-term investments and auction rate securities | $ | 57,606 | $ | 106,905 | $ | 145,057 | $ | 198,723 | $ | 201,592 | |||||||||
Working capital | 126,678 | 164,835 | 194,406 | 269,532 | 259,739 | ||||||||||||||
Net property, plant and equipment | 25,858 | 27,930 | 27,894 | 32,103 | 39,661 | ||||||||||||||
Total assets | 221,240 | 270,209 | 322,208 | 433,210 | 440,167 | ||||||||||||||
Shareholders’ equity | 177,321 | 222,881 | 264,142 | 378,670 | 362,299 | ||||||||||||||
1. | Fiscal 2015 included non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015, $3.0 million for restructuring costs for the Chelmsford facility closure, which primarily consisted of $2.0 million for employee severance and related costs and $1.0 million for inventory write-offs. Fiscal 2015 also included $4.5 million of charges for share-based compensation expense, $4.3 million for impairment of a minority investment, $1.5 million for amortization of acquired intangible assets and a $0.6 million gain on liquidation of a foreign subsidiary. The Company also paid $9.0 million in cash for the Topwin acquisition during fiscal 2015. |
2. | Fiscal 2014 included $1.1 million for restructuring costs, which primarily consisted of $0.8 million charge towards obligations for our outgoing Chief Executive Officer and $0.2 million of charges related to asset write-offs. Fiscal 2014 also included $12.8 million of charges in cost of sales for inventory write-offs, $9.7 million for impairment of a minority equity investment, $6.1 million for share-based compensation expense, $2.9 million for amortization of acquired intangible assets, including $0.3 million of accelerated amortization, $1.3 million for net gain on sale of property and equipment, $0.6 million of accelerated depreciation on assets that will no longer be utilized and a $0.5 million of gain on acquisition of Semiconductor Systems business. |
3. | Fiscal 2013 included $2.6 million for restructuring costs, which primarily consisted of $1.5 million of employee severance costs and $1.1 million of charges related to asset write-offs. Fiscal 2013 also included $21.0 million of charges in cost of sales for inventory write-offs, $8.1 million for share-based compensation expense, $4.8 million for amortization of acquired intangible assets, including $2.3 million of accelerated amortization, $1.2 million for net gain on sale of property and equipment, and a $15.3 million benefit for net legal settlement proceeds. |
4. | Fiscal 2013 included a charge of $46.9 million to increase the valuation allowance on deferred tax assets. |
5. | Fiscal 2012 included $3.8 million for restructuring costs, which primarily consisted of $1.9 million of employee severance costs and $1.7 million of accelerated depreciation for certain assets. Fiscal 2012 also included $2.0 million of charges in cost of sales for an inventory write-off, $11.5 million for share-based compensation expense, $1.7 million for amortization of acquired intangible assets, $1.2 million for loss on disposal of assets and the write-off of engineering materials, $0.6 million for legal settlement costs, and a gain of $2.7 million from sale of previously impaired auction rate securities. |
6. | Fiscal 2011 included $9.3 million for share-based compensation expense, $1.4 million for legal settlement costs, $0.8 million for restructuring costs, $2.0 million for amortization of acquired intangible assets, and a gain of $0.7 million from sale of previously impaired auction rate securities. |
7. | No investments in auction rate securities were held at the end of fiscal 2012, fiscal 2013, fiscal 2014 or fiscal 2015. |
8. | Fiscal 2011 included auction rate securities at a fair value of $5.2 million. |
23
Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations
Overview of Business
Electro Scientific Industries, Inc. and its subsidiaries (ESI) is a leading supplier of innovative laser-based manufacturing solutions for the microtechnology industry. ESI's integrated solutions allow industrial designers and process engineers to control the power of laser light to transform materials in ways that differentiate their consumer electronics, wearable devices, semiconductor circuits and high-precision components for market advantage. Founded in 1944, ESI is headquartered in Portland, Oregon, with global operations and subsidiaries in Asia, Europe and North America.
Laser microfabrication comprises a set of precise micron-level processes, including drilling, scribing, dicing, singulation, cutting, ablating, trimming, and precision marking on multiple types of materials. These processes require application-specific laser systems that are able to meet our customers’ exacting performance and productivity requirements. Our laser-based systems enable improved performance or improve production yields for flexible and rigid printed circuit boards, semiconductor devices, advanced semiconductor packaging, touch-panel glass, flat panel liquid crystal displays (LCDs) and other high value components to enable functionality, increase performance and improve production yields.
Additionally, we produce high-capacity test and inspection equipment that is critical to the quality control process during the production of multilayer ceramic capacitors (MLCCs). Our equipment ensures that each component meets the electrical and physical tolerances required to perform properly.
Historically and during much of fiscal 2015 we operated in one segment, high technology manufacturing equipment, which was comprised of products classified into three groups: interconnect and micromachining, semiconductor, and component test. As a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business, during the fourth quarter of 2015 we realigned our products into two segments: Component Processing and Micromachining. Included within Component Processing are Interconnect Products (IP), Semiconductor Products (SP), and Component Products (CP), which are sold primarily to manufacturers of electronic components to drill, cut, trim, ablate, test and mark features that improve the yield or functionality of the component. Micromachining products are sold primarily to manufacturers of end devices across multiple industries and are used to drill, cut, or mark features on a variety of materials, generally on the casing or external surfaces of the end device.
Overview of Financial Results
Our fiscal year consists of 52 or 53 weeks ending on the Saturday nearest March 31. Accordingly, our fiscal 2015 reporting period consisted of a 52-week period ending on March 28, 2015, our fiscal 2014 reporting period consisted of a 52-week period ending on March 29, 2014 and our fiscal 2013 reporting period consisted of a 52-week period ending on March 30, 2013. All references to years or quarters relate to fiscal years or fiscal quarters unless otherwise noted.
Total order volume in 2015 was $170.9 million, compared to orders of $172.2 million in 2014. Orders within our Component Processing segment increased approximately 10%, with increases in IP orders partially offset by declines in CP and SP. Orders for IP increased by approximately 29% primarily due to increased orders for flex via drilling systems as a result of increased sales of the 5335 next generation flex via drilling tool and technology order increases particularly in Korea. Orders for CP decreased by approximately 11% primarily as a result of reduced MLCC system demand due to fewer technology sales from the prior year and continued over capacity, partially offset by increased tooling and consumable parts orders. Orders for SP decreased by approximately 2% with increases in circuit trim system orders more than offset by decreased wafer mark and service activity. Orders for Micromachining segment products decreased by approximately 33% primarily as a result of continued utilization of existing capacity and smaller new design wins from our largest customer.
Total revenue in 2015 was $159.1 million, down approximately 12.1%, compared to revenue of $181.2 million in 2014. Total shipments were $161.9 million in 2015 compared to $183.6 million in 2014. Component Processing shipments decreased by approximately 12%. Within our Component Processing segment, SP shipments increased by approximately 1% due to increased circuit trim and wafer trim system shipments, partially offset by reduced shipments for wafer mark systems. IP shipments decreased by approximately 17% primarily due to backlog reduction in 2014 compared to 2015. CP shipments decreased by approximately 18% due to lower system orders. In our Micromachining segment, MP shipments decreased approximately 11% primarily due to lower orders of microfabrication products due to reuse and smaller design wins from our largest customer. Backlog was $36.5 million as of March 28, 2015 compared to $27.4 million as of March 29, 2014, primarily due to increased orders for flex via drilling systems in the fourth quarter of 2015.
Gross profit was $54.7 million in 2015 compared to $59.9 million in 2014. Overall gross profit was impacted by a decrease in volume, partially offset by lower inventory write-offs associated with discontinued products. Gross margin increased to 34.4% in 2015 compared to 33.0% in 2014. This increase in gross margin was primarily due to lower inventory
24
write-offs associated with discontinued products and lower amortization expense, partially offset by less favorable product mix, higher warranty costs and less favorable absorption of fixed costs due to lower production volume.
Net operating expenses of $94.4 million in 2015 increased $5.7 million from $88.7 million in 2014. This increase was primarily due to a $7.9 million impairment of goodwill for our Component Processing and Micromachining reporting units. In the fourth quarter of 2015 we realigned our products into two segments as a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business. This reorganization required the Company to reassign its reported goodwill to its new reporting units based on the relative fair value of the respective reporting units, and perform an impairment analysis at the reporting unit level. As a result of the analysis, which is still in process, we determined that the goodwill of our Component Processing and Micromachining reporting units' goodwill was impaired and recorded an estimated non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015. Excluding the goodwill impairment, net operating expenses decreased $2.1 million. This was primarily due to a $1.5 million decrease in share-based compensation expense due to the lower quantity of restricted stock unit awards granted, combined with lower fair value of new awards granted in 2015. Additionally, project expenses were lower by $1.5 million, travel expenses decreased by $1.4 million and facilities expenses decreased by $0.5 million, due to our continued emphasis to reduce discretionary spending. These decreases were partially offset by a $2.1 million charge related to employee severance and related costs for our Chelmsford, Massachusetts restructuring plan and a $0.8 million charge for the acquisition costs related to Topwin. Operating loss was $39.7 million in 2015 compared to operating loss of $28.8 million in 2014, an increase of $10.9 million.
Non-operating expenses were $3.8 million in 2015 compared to $9.6 million in 2014. The decrease was primarily due to lower impairment expense on our minority equity investment in OmniGuide, Inc. and to a lesser extent, by a $0.6 million gain on the liquidation of a foreign subsidiary.
Provision for income taxes was $0.2 million in 2015 compared to a benefit of $0.1 million in 2014, primarily due to a higher mix of income from foreign jurisdictions, partially offset by a favorable assessment related to the legal settlement in Taiwan. Net loss was $43.8 million in 2015 compared to $38.3 million in 2014.
Results of Operations
The following table presents results of operations data as a percentage of net sales for the years ended March 28, 2015, March 29, 2014 and March 30, 2013:
2015 | 2014 | 2013 | ||||||
Net sales: | 100.0 | % | 100.0 | % | 100.0 | % | ||
Cost of sales: | 65.6 | 67.0 | 71.7 | |||||
Gross profit | 34.4 | 33.0 | 28.3 | |||||
Selling, service and administration | 31.0 | 28.5 | 24.5 | |||||
Research, development and engineering | 22.1 | 20.9 | 17.2 | |||||
Restructuring costs | 1.3 | 0.6 | 1.2 | |||||
Impairment of goodwill | 5.0 | |||||||
Gain on sale of property and equipment, net | — | (0.7 | ) | (0.6 | ) | |||
Gain on acquisition of Semiconductor Systems business | — | (0.3 | ) | — | ||||
Legal settlement proceeds, net | — | — | (7.0 | ) | ||||
Operating loss | (25.0 | ) | (15.9 | ) | (7.0 | ) | ||
Other-than-temporary impairment of cost method investments | (2.7 | ) | (5.4 | ) | — | |||
Interest and other income, net | 0.3 | 0.1 | 0.1 | |||||
Loss before income taxes | (27.4 | ) | (21.2 | ) | (6.9 | ) | ||
Provision for (benefit from) income taxes | 0.1 | (0.1 | ) | 18.4 | ||||
Net loss | (27.5 | )% | (21.1 | )% | (25.3 | )% | ||
25
Fiscal Year Ended March 28, 2015 Compared to Fiscal Year Ended March 29, 2014
Net Sales
The following table presents net sales information by previously disclosed product groups and is included as a reference to transition from our prior reporting structure to our new operating segment structure:
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Interconnect & Microfabrication Group (IMG) | $ | 101,433 | 63.7 | % | $ | 120,947 | 66.8 | % | |||||
Components Group (CG) | 19,099 | 12.0 | 24,441 | 13.5 | |||||||||
Semiconductor Group (SG) | 38,586 | 24.2 | 35,779 | 19.7 | |||||||||
$ | 159,118 | 100.0 | % | $ | 181,167 | 100.0 | % | ||||||
The following table presents net sales information by operating segment and product:
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Component Processing | |||||||||||||
Interconnect Products (IP) | $ | 66,913 | 42.1 | % | $ | 81,180 | 44.8 | % | |||||
Component Products (CP) | 19,099 | 12.0 | 24,441 | 13.5 | |||||||||
Semiconductor Products (SP) | 38,586 | 24.2 | 35,780 | 19.7 | |||||||||
124,598 | 78.3 | 141,401 | 78.1 | ||||||||||
Micromachining | |||||||||||||
Micromachining Products (MP) | 34,520 | 21.7 | 39,766 | 21.9 | |||||||||
34,520 | 21.7 | 39,766 | 21.9 | ||||||||||
Net Sales | $ | 159,118 | 100.0 | % | $ | 181,167 | 100.0 | % | |||||
Net sales for 2015 decreased $22.0 million or 12% from net sales for 2014. By segment, Component Processing sales decreased by $16.8 million or 12% and Micromachining sales decreased by $5.2 million or 13%, compared to 2014.
IP sales for 2015 decreased $14.3 million or 18% compared to 2014. The decrease in IP sales was primarily driven by backlog reduction in 2014 of flex interconnect systems compared to an increase in backlog in 2015 and lower sales to Korea.
CP sales for 2015 decreased $5.3 million or 22% compared to 2014. The decrease was primarily driven by continued customer utilization of existing capacity for MLCC systems in 2015, partially offset by an increase in tooling and consumables parts revenue.
SP sales for 2015 increased $2.8 million or 8% compared to 2014. The increase in SP revenues was primarily driven by increased sales of circuit trim, wafer trim and service activity from the Semiconductor Systems business, which was acquired during the first quarter of 2014.
MP sales for 2015 decreased $5.2 million or 13% compared to 2014, primarily as a result of reduced shipments of advanced microfabrication systems as our largest customer continued to move towards a reuse program and with no new large design wins.
The following table presents net sales information by geographic region:
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Asia | $ | 124,049 | 78.0 | % | $ | 136,336 | 75.3 | % | |||||
Americas | 18,067 | 11.4 | 31,596 | 17.4 | |||||||||
Europe | 17,002 | 10.7 | 13,235 | 7.3 | |||||||||
$ | 159,118 | 100.0 | % | $ | 181,167 | 100.0 | % | ||||||
In 2015, net sales to Asia decreased by $12.3 million due to higher shipments of flex interconnect systems to Korea in 2014 which did not repeat at the same level in 2015, partially offset by increased system sales for circuit trim and wafer trim. Net sales to Americas decreased by $13.5 million primarily due to reduced sales in our Semiconductor Systems business and to
26
a lesser extent, by reduced MLCC system sales. Europe sales increased by $3.8 million primarily due to increased wafer and circuit trim sales.
Gross Profit by operating segment
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Gross Profit | % of Sales | Gross Profit | % of Sales | |||||||||
Component Processing | $ | 50,970 | 40.9 | % | $ | 63,914 | 45.2 | % | |||||
Micromachining | 6,383 | 18.5 | 12,175 | 30.6 | |||||||||
Corporate and other | (2,672 | ) | — | (16,218 | ) | — | |||||||
$ | 54,681 | 34.4 | % | $ | 59,871 | 33.0 | % | ||||||
Gross profit was $54.7 million in 2015 compared to $59.9 million in 2014. Overall gross profit was impacted by lower sales combined with increased warranty costs, partially offset by lower inventory write-offs associated with discontinued products.
Gross margin increased to 34.4% in 2015 compared to 33.0% in 2014. The increase was primarily the result of lower inventory write-offs associated with discontinued products in 2014, partially offset by lower volumes on relatively fixed manufacturing expenses.
Gross margin for Component Processing decreased from 45.2% to 40.9% primarily due to lower volumes on fixed manufacturing costs, higher warranty costs, and unfavorable product mix.
Gross margin for Micromachining decreased from 30.6% to 18.5% primarily due to lower volumes on fixed manufacturing costs.
Corporate and other cost of sales include expenses not allocated to our two operating segments, including stock compensation, amortization of intangibles, restructuring and other expenses. The change in 2015 is due to lower inventory write-offs associated with discontinued products and lower amortization expense.
Operating Expenses
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Expense | % of Net Sales | Expense | % of Net Sales | |||||||||
Selling, service and administration | $ | 49,301 | 31.0 | % | $ | 51,598 | 28.5 | % | |||||
Research, development and engineering | 35,166 | 22.1 | 37,839 | 20.9 | |||||||||
Impairment of goodwill | 7,889 | 5.0 | — | — | |||||||||
Restructuring costs | 2,069 | 1.3 | 1,070 | 0.6 | |||||||||
Gain on sale of property and equipment, net | — | — | (1,301 | ) | (0.7 | ) | |||||||
Gain on acquisition of Semiconductor Systems business | — | — | (499 | ) | (0.3 | ) | |||||||
$ | 94,425 | 59.3 | % | $ | 88,707 | 49.0 | % | ||||||
Selling, Service and Administration
Selling, service and administration (SS&A) expenses primarily consist of labor and other employee-related expenses including share-based compensation expense, travel expenses, professional fees, sales commissions and facilities costs. SS&A expenses for 2015 decreased $2.3 million compared to 2014. This decrease was primarily attributable to lower expenses for share-based compensation, travel, facilities and training. These decreases were partially offset by higher audit, legal and variable pay costs. Share-based compensation expenses were lower primarily due to the lower quantity of restricted stock unit awards granted, combined with lower fair value of new awards granted in 2015.
Research, Development and Engineering
Research, development and engineering (RD&E) expenses are primarily comprised of labor and other employee-related expenses, professional fees, project materials, equipment and facilities costs. RD&E expenses for 2015 decreased $2.7 million compared to 2014. This decrease was primarily due to lower expenses for project materials, patent legal fees, travel and consulting, partially offset by higher labor and variable pay costs.
27
Impairment of goodwill
In the fourth quarter of 2015 we realigned our products into two segments as a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business. This reorganization required the Company to reassign its reported goodwill to its new reporting units based on the relative fair value of the respective reporting units. The carrying value of goodwill by reporting unit prior to March 28, 2015 was approximately $7.7 million for Topwin, $6.3 million for Component Processing and $1.6 million for Micromachining. The Company reviews its goodwill for impairment annually, or more frequently, if events or circumstances indicate that the carrying value of the reporting unit exceeds its fair value. Fair value is determined based on the present value of estimated cash flows for the reporting unit developed using available industry and market information, discount rates and the expected long-term cash flow growth rates. Discount rates are determined based on the cost of capital.
In performance of the annual review of goodwill, the Company conducted the first step of goodwill impairment test for all our newly formed reporting units and determined that the carrying value of the component processing and micromachining reporting units exceeded fair value. In accordance with ASC Topic 350, Intangibles-Goodwill and Other (Topic 350) and our accounting policies, we tested the Component Processing and Micromachining reporting units' goodwill for impairment using a step two analysis. As a result of that analysis, which is not complete, we recorded an estimated non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015. The primary driver of this impairment charge was our reorganization from a single reporting unit and operating segment to multiple reporting units and operating segments as of March 28, 2015, as well as a decline in revenues and operating and cash flow losses which changed the factors used in assessing goodwill. As a result of the reorganization and analysis at a segment and reporting unit level, any goodwill allocated to Component Processing and Micromachining was no longer supported by the estimated fair value of the respective businesses. Under our former reporting unit structure, goodwill was evaluated on the basis of a single reporting unit and fair value was estimated based on market capitalization plus a reasonable control premium.
Restructuring Costs
In 2015, as a part of the Company’s plan to streamline its manufacturing and development activities, the Company initiated a restructuring plan to close the assembly plant and development center located in Chelmsford, Massachusetts. The restructuring costs of $2.1 million incurred in 2015 were comprised primarily of employee severance and related benefits for the Chelmsford restructuring plan.
Restructuring costs for 2014 were $1.1 million, primarily due to $0.8 million of contractual payments to our former Chief Executive Officer and $0.3 million in accelerated depreciation charges on certain assets that are no longer being utilized.
Gain on Sale of Property and Equipment, net
In 2014, we sold a portion of land and a building at our Portland, Oregon campus for $3.7 million resulting in a pre-tax gain of $1.3 million.
Gain on acquisition of Semiconductor Systems Business
The gain on our acquisition of Semiconductor Systems business was $0.5 million in 2014. This purchase resulted in an overall gain as the estimated fair value of the assets purchased was in excess of the total purchase consideration, primarily due to the recognition of certain intangible assets, comprised of developed technology and order backlog.
Share-Based Compensation
The table of operating expenses shown above also includes $3.9 million and $5.4 million of share-based compensation expense for 2015 and 2014, respectively. The decrease was primarily due to the lower quantity of restricted stock unit awards granted, combined with lower fair value of new awards granted in 2015.
Non-operating Income and Expense, net
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Interest and Other Expense, net | % of Net Sales | Interest and Other Expense, net | % of Net Sales | |||||||||
Loss and other-than-temporary impairment of cost method investment | (4,263 | ) | (2.7 | )% | (9,703 | ) | (5.4 | )% | |||||
Interest and other income, net | 430 | 0.3 | 113 | 0.1 | |||||||||
Total non-operating (expense) income | $ | (3,833 | ) | (2.4 | )% | $ | (9,590 | ) | (5.3 | )% | |||
28
Other-than-temporary impairment of cost method investment
As of March 30, 2013, the Company had made a total investment in the equity of OmniGuide, Inc., of $9.0 million. This investment is accounted for as a cost method investment. In the second quarter of 2014, the Company invested an additional $5.0 million in OmniGuide Series F Preferred Stock. As this Series F Preferred Stock round of equity financing was priced below previous rounds, it was considered a triggering event and the Company recorded a $3.6 million impairment charge on its Series D and Series E investments at that time. In the fourth quarter of 2014, further triggering events were identified due to poor operating results through the end of the year combined with decreasing cash levels. As a result, the Company performed an updated valuation of these investments and recorded an additional impairment of $6.1 million, for a total other-than-temporary impairment of $9.7 million in 2014. Remaining carrying value of this cost method investment as of March 29, 2014 was $4.3 million.
In the fourth quarter of 2015, OmniGuide's lender exercised its right to convert the outstanding obligations owed to it by OmniGuide into 100% of OmniGuide's outstanding equity under the applicable financing agreements. This action resulted in an immediate and total impairment of the Company's ownership of OmniGuide, and accordingly the Company recorded a loss of $4.3 million in the fourth quarter of 2015, resulting in zero carrying value on its Consolidated Balance Sheets at March 28, 2015.
Interest and Other Income (Expense), net
Interest and other income (expense), net, consists of interest income and expense, market gains and losses on assets held in employees’ deferred compensation accounts, realized and unrealized foreign exchange gains and losses, bank charges, investment management fees, and other miscellaneous non-operating items. Interest and other income, net was $0.4 million in 2015 compared to $0.1 million in 2014. This increase was primarily attributable to a $0.6 million gain on liquidation of a foreign subsidiary, which was partially offset by lower interest yields on our investments and market losses on assets held for our deferred compensation plan.
Income Taxes
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Income Tax Provision | Effective Tax Rate | Income Tax Benefit | Effective Tax Rate | |||||||||
Provision for (Benefit from) income taxes | $ | 234 | (0.5 | )% | $ | (92 | ) | 0.2 | % | ||||
The provision for income taxes for 2015 was $0.2 million on a pretax loss of $43.6 million, an effective tax rate of (0.5)%. For 2014, the benefit from income taxes was $0.1 million on a pretax loss of $38.4 million, an effective rate of 0.2%. The change in provision for income taxes was primarily due to increased tax expense incurred on our foreign income, partially offset by US tax refunds resulting from the conclusion of a tax audit, a favorable assessment related to the legal settlement in Taiwan and refundable credits. Our effective tax rate is subject to fluctuation based upon the mix of income and relative tax rates between jurisdictions, and the occurrence and timing of numerous discrete events such as changes in tax laws or their interpretations, extensions or expirations of research and experimentation credits, closure of tax years subject to examination, finalization of income tax returns, the relationship of fixed deductions to overall changes in estimated and actual pretax income or loss and the tax jurisdictions where income or loss is generated. Based on currently available information, we are not aware of any further discrete events which are likely to occur that would have a material effect on our financial position, expected cash flows or results of operations.
Net Loss
2015 | 2014 | ||||||||||||
(In thousands, except percentages) | Net Loss | % of Net Sales | Net Loss | % of Net Sales | |||||||||
Net loss | $ | (43,811 | ) | (27.5 | )% | $ | (38,334 | ) | (21.1 | )% | |||
Net loss for 2015 was $43.8 million, or $1.43 per basic and diluted share, compared to net loss of $38.3 million, or $1.28 per basic and diluted share for 2014.
29
Fiscal Year Ended March 29, 2014 Compared to Fiscal Year Ended March 30, 2013
Net Sales
The following table presents net sales information by previously disclosed product groups and is included as a reference to transition from our prior reporting structure to our new operating segment structure:
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Interconnect & Microfabrication Group (IMG) | $ | 120,947 | 66.8 | % | $ | 170,360 | 78.6 | % | |||||
Components Group (CG) | 24,441 | 13.5 | 27,511 | 12.7 | |||||||||
Semiconductor Group (SG) | 35,779 | 19.7 | 18,754 | 8.7 | |||||||||
$ | 181,167 | 100.0 | % | $ | 216,625 | 100.0 | % | ||||||
The following table presents net sales information by segment and product:
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Component Processing | |||||||||||||
Interconnect Products (IP) | $ | 81,180 | 44.8 | % | $ | 78,941 | 36.4 | % | |||||
Component Products (CP) | 24,441 | 13.5 | 27,511 | 12.7 | |||||||||
Semiconductor Products (SP) | 35,780 | 19.7 | 18,620 | 8.6 | |||||||||
141,401 | 78.1 | 125,072 | 57.7 | ||||||||||
Micromachining | |||||||||||||
Micromachining Products (MP) | 39,766 | 21.9 | 91,553 | 42.3 | |||||||||
39,766 | 21.9 | 91,553 | 42.3 | ||||||||||
Net Sales | $ | 181,167 | 100.0 | % | $ | 216,625 | 100.0 | % | |||||
Net sales for 2014 decreased $35.5 million or 16% from net sales for 2013. By segment, Component Processing sales increased by $16.3 million or 13% and Micromachining sales decreased by $51.8 million or 57% compared to 2013.
IP sales for 2014 increased $2.2 million or 3% compared to 2013 primarily due to increased service and support activity and sales of initial glass singulation systems.
CP sales for 2014 decreased $3.1 million or 11% compared to 2013. The decrease was primarily driven by customer utilization of existing capacity, reflecting only modest growth in end user demand for consumer electronics, partially offset by improved sales of the next generation MLCC testers.
SP sales for 2014 increased $17.2 million or 92% compared to 2013. The increase in SP revenues was primarily driven by the addition of our Semiconductor Systems business, which we acquired in the first quarter of 2014.
MP sales for 2014 decreased $51.8 million or 57% compared to 2013. The decrease was primarily driven by the shipment of advanced microfabrication systems to our largest customer in the first half of 2013 which did not repeat at the same level in 2014, as our largest customer began to move towards a reuse and upgrade approach, Additionally we had lower sales of PCB depaneling tools following a large order in 2013 which did not repeat in 2014.
The following table presents net sales information by geographic region:
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Net Sales | % of Net Sales | Net Sales | % of Net Sales | |||||||||
Asia | $ | 136,336 | 75.3 | % | $ | 186,346 | 86.1 | % | |||||
Americas | 31,596 | 17.4 | 20,907 | 9.7 | |||||||||
Europe | 13,235 | 7.3 | 9,372 | 4.3 | |||||||||
$ | 181,167 | 100.0 | % | $ | 216,625 | 100.0 | % | ||||||
In 2014, net sales to Americas and Europe increased by $10.7 million and $3.9 million, respectively compared to 2013. The increase was primarily driven by additional sales from our acquired Semiconductor Systems business. Net sales to Asia decreased by $50.0 million due to lower orders for advanced microfabrication products from our largest customer as a result of fewer new designs and utilization of upgrades to satisfy capacity needs.
30
Gross Profit by operating segment
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Gross Profit | % of Sales | Gross Profit | % of Sales | |||||||||
Component Processing | $ | 63,914 | 45.2 | % | $ | 49,435 | 39.5 | % | |||||
Micromachining | 12,175 | 30.6 | 37,922 | 41.4 | |||||||||
Corporate and other | (16,218 | ) | — | (26,069 | ) | — | |||||||
$ | 59,871 | 33.0 | % | $ | 61,288 | 28.3 | % | ||||||
Gross profit was $59.9 million in 2014 compared to $61.3 million in 2013. Overall gross profit was impacted by a decrease in volume and an increase in inventory step-up purchase accounting costs, offset by lower inventory and intangible write-offs associated with discontinued products. Gross margin increased to 33.0% in 2014 compared to 28.3% in 2013, primarily the result of lower inventory and intangible write-offs associated with discontinued products in 2013.
Gross margin for Component Processing increased from 39.5% to 45.2% primarily as a result of higher volumes and favorable mix which included the 5335 flex drilling tool which was introduced in 2014.
Gross margin for Micromachining decreased from 41.4% to 30.6% primarily on the impact of lower volumes partially offset by improved mix of product and support activity.
Corporate and other cost of sales include expenses not allocated to our two operating segments, including stock compensation, amortization of intangibles, restructuring and other expenses. The change in gross profit is due to lower inventory and intangible write-offs associated with discontinued products.
Operating Expenses
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Expense | % of Net Sales | Expense | % of Net Sales | |||||||||
Selling, service and administration | $ | 51,598 | 28.5 | % | $ | 53,086 | 24.5 | % | |||||
Research, development and engineering | 37,839 | 20.9 | 37,196 | 17.2 | |||||||||
Restructuring costs | 1,070 | 0.6 | 2,612 | 1.2 | |||||||||
Gain on sale of property and equipment, net | (1,301 | ) | (0.7 | ) | (1,226 | ) | (0.6 | ) | |||||
Gain on acquisition of Semiconductor Systems business | (499 | ) | (0.3 | ) | — | — | |||||||
Legal settlement proceeds, net | — | — | (15,262 | ) | (7.0 | ) | |||||||
$ | 88,707 | 49.0 | % | $ | 76,406 | 35.4 | % | ||||||
Selling, Service and Administration
Selling, service and administration (SS&A) expenses primarily consist of labor and other employee-related expenses including share-based compensation expense, travel expenses, professional fees, sales commissions and facilities costs. SS&A expenses for 2014 decreased $1.5 million compared to 2013. This decrease was primarily attributable to the impact of restructuring actions taken at the end of 2013, and a decrease in share-based compensation expenses, partially offset by increased expenses resulting from addition of the Semiconductor Systems business.
Research, Development and Engineering
Research, development and engineering (RD&E) expenses are primarily comprised of labor and other employee-related expenses, professional fees, project materials costs, equipment costs and facilities costs. RD&E expenses for 2013 increased $0.6 million compared to 2013. The increase was primarily due to our acquisition of the Semiconductor Systems business and the development and installation expenses related to a new strategic customer win, partially offset by lower headcount and other variable expenses.
Restructuring Costs
Restructuring costs for 2014 were $1.1 million, primarily due to $0.8 million of contractual payments to our outgoing Chief Executive Officer and $0.3 million in accelerated depreciation charges on certain assets that are no longer being utilized.
In 2013, we initiated a restructuring plan to improve efficiency, transition from memory repair and other legacy products, and focus on laser microfabrication for consumer electronics, emerging technologies related to semiconductor 3D packaging,
31
and proprietary laser technology. Additionally, this plan included consolidation of certain development and manufacturing activities in Asia at our Singapore facility.
Gain on Sale of Property and Equipment, net
During 2014, we sold a portion of land and a building at our Portland, Oregon campus for $3.7 million resulting in a pre-tax gain of $1.3 million. In 2013, we sold a facility located in China for $2.0 million, resulting in a pre-tax gain of $1.3 million, partially offset by loss on disposal of certain fixed assets primarily used in testing and development.
Gain on acquisition of Semiconductor Systems Business
Gain on acquisition of Semiconductor Systems business was $0.5 million in 2014. This purchase resulted in an overall gain as the estimated fair value of the assets purchased was in excess of the total purchase consideration, primarily due to the recognition of certain intangible assets, comprised of developed technology and order backlog.
Legal Settlement Proceeds, net
Legal settlement proceeds net of costs, were $15.3 million in 2013, which consisted of the settlement proceeds of $16.3 million related to a patent suit in Taiwan, partially offset by court and legal fees associated with the All Ring Tech Co Ltd., litigation and other non-recurring legal matters. The settlement of these proceedings allowed for the release of $22.3 million of restricted cash in the fourth quarter of 2013.
Share-Based Compensation
The table of operating expenses shown above also includes $5.4 million and $7.2 million of share-based compensation expense for 2014 and 2013, respectively. The decrease was primarily driven by decreased attainment of performance-based grants in 2014, award cancellations and, to a lesser extent, fewer overall awards granted.
Non-operating Income and Expense
2014 | 2013 | |||||||||
(In thousands, except percentages) | Interest and Other Expense, net | % of Net Sales | Interest and Other Income, net | % of Net Sales | ||||||
Loss and other-than-temporary impairment of cost method investment | (9,703 | ) | (5.4 | ) | — | — | ||||
Interest and other income, net | 113 | 0.1 | 253 | 0.1 | ||||||
Total non-operating (expense) income | (9,590 | ) | (5.3 | ) | 253 | 0.1 | ||||
Other-than-temporary impairment of cost method investments
As of March 30, 2013, the Company had made a total investment in the equity of OmniGuide, Inc., of $9.0 million. The investment is accounted for as a cost method investment. In the second quarter of 2014, the Company invested an additional $5.0 million in OmniGuide Series F Preferred Stock. As this Series F Preferred Stock round of equity financing was priced below previous rounds, it was considered a triggering event and the Company recorded a $3.6 million impairment charge of its Series D and Series E investments at that time. In the fourth quarter of 2014, further triggering events were identified due to poor operating results through the end of the year, combined with decreasing cash levels. As a result the Company performed an updated valuation of these investments and recorded an additional impairment of $6.1 million, for a total other-than-temporary impairment of $9.7 million in 2014. Remaining carrying value of these cost method investments as of March 29, 2014 was $4.3 million.
Interest and Other Income (Expense), net
Interest and other income (expense), net, consists of interest income and expense, market gains and losses on assets held in employees’ deferred compensation accounts, realized and unrealized foreign exchange gains and losses, bank charges, investment management fees, and other miscellaneous non-operating items.
32
Income Taxes
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Income Tax Benefit | Effective Tax Rate | Income Tax Provision | Effective Tax Rate | |||||||||
Provision for (benefit from) income taxes | $ | (92 | ) | 0.2 | % | $ | 39,851 | (268.1 | )% | ||||
The income tax benefit for 2014 was $0.1 million on pretax loss of $38.4 million, an effective tax rate of 0.2%. For 2013, the income tax provision was $39.9 million on pretax loss of $14.9 million, an effective rate of (268.1)%. The 2014 tax benefit was primarily from US tax refunds resulting from the conclusion of a tax audit and refundable credits, offsetting tax expense incurred on our foreign income. In 2013, we recorded a $49.7 million valuation allowance against our U.S. deferred tax assets and attributes. We continue to believe that these tax assets and attributes do not meet the threshold for recognition based on our operating results, future forecasts, and consideration of available tax planning strategies.
Net (Loss) Income
2014 | 2013 | ||||||||||||
(In thousands, except percentages) | Net Loss | % of Net Sales | Net Loss | % of Net Sales | |||||||||
Net (loss) income | $ | (38,334 | ) | (21.1 | )% | $ | (54,716 | ) | (25.3 | )% | |||
Net loss for 2014 was $38.3 million, or $1.28 per basic and diluted share, compared to net loss of $54.7 million, or $1.86 per basic and diluted share for 2013.
Financial Condition and Liquidity
At March 28, 2015, our principal sources of liquidity were cash and cash equivalents of $51.0 million, short-term investments of $6.6 million and accounts receivable of $46.0 million. At March 28, 2015, we had a current ratio of 3.99 and held no long-term debt. Working capital of $126.7 million decreased $38.2 million compared to the March 29, 2014 balance of $164.8 million. Cash and cash equivalents were substantially impacted by operating losses, net working capital changes, payment of cash for the Topwin acquisition, payment of quarterly dividends for the first three quarters of 2015 and share repurchases during the first quarter of 2015.
The cash flow impact of net working capital changes represented approximately $9.7 million of cash outflows in 2015 and were primarily related to net increases in accounts receivable of $8.0 million and net decreases in accounts payable and accrued liabilities of $4.0 million. Accounts receivable increased $8.0 million from 2014 and $5.4 million from the third quarter of 2015. The primary reason for the increase in accounts receivable in the fourth quarter of 2015 was due to the comparatively larger level of shipments in the latter part of the quarter, and, to a lesser extent, the addition of receivables from our Topwin acquisition. Additionally, we have granted extended payment terms on a limited basis for competitive reasons. The credit quality of our accounts receivable remains strong and, historically, we have had minimal bad debt losses. We recorded incremental reserves for bad debt of approximately $0.3 million which primarily related to our acquisition of Topwin. The reduction in accounts payable and accrued liabilities of $4.0 million was primarily a result of the timing of inventory receipts, and to a lesser extent by payments earlier in the quarter than historic practice, which we expect to normalize in the first quarter of 2016.
As of March 28, 2015, we have permanently reinvested $28.8 million of foreign earnings primarily related to manufacturing operations in Singapore and China (Topwin).
In February 2015, the Board of Directors suspended the quarterly dividend which was adopted by the Company in December 2011. The Company paid dividends for the first three quarters of 2015 under the 2011 dividend policy. The following table summarizes the quarterly dividends declared and paid by us in 2015 and 2014:
Date Declared | Record Date | Payable Date | Amount per Share | |||||
November 18, 2014 | December 1, 2014 | December 15, 2014 | $ | 0.08 | ||||
August 21, 2014 | September 2, 2014 | September 12, 2014 | $ | 0.08 | ||||
May 15, 2014 | May 27, 2014 | June 10, 2014 | $ | 0.08 | ||||
February 13, 2014 | February 27, 2014 | March 13, 2014 | $ | 0.08 | ||||
November 7, 2013 | November 19, 2013 | December 4, 2013 | $ | 0.08 | ||||
August 8, 2013 | August 19, 2013 | September 3, 2013 | $ | 0.08 | ||||
May 14, 2013 | June 5, 2013 | June 19, 2013 | $ | 0.08 | ||||
33
We paid aggregate dividends of $7.3 million and $9.6 million in 2015 and 2014, respectively.
On December 9, 2011, the Board of Directors authorized a share repurchase program totaling $20 million to acquire shares of the Company’s outstanding common stock. The repurchases are to be made at management’s discretion in the open market or in privately negotiated transactions in compliance with applicable securities laws and other legal requirements and are subject to market conditions, share price and other factors.
In the first quarter of 2015 the Company repurchased 207,738 shares for $1.5 million in cash under this authorization at an average price of $7.01 per share, calculated inclusive of commissions and fees. The Company did not repurchase any shares during the subsequent quarters of 2015. In 2014 the Company repurchased 19,832 shares for $0.2 million at an average price of $9.65 per share. The Company has repurchased a total of 227,570 shares to date under this authorization as a part of its publicly announced plan. There is no fixed completion date for the repurchase program.
On March 20, 2015, we entered into a loan and security agreement ("Loan Agreement") with Silicon Valley Bank ("SVB"), as lender. The Loan Agreement provides for a senior secured asset-based revolving credit facility (the “Credit Facility”) with up to $30 million available on a revolving basis, including a $15 million sublimit for letters of credit, until March 20, 2018. Borrowings under the Credit Facility may be used for working capital needs and other general corporate purposes. The Credit Facility has three levels of reporting, pricing, and availability based on the Company’s liquidity and certain borrowing base valuations of the Company’s eligible accounts receivable. Amounts outstanding under the Credit Facility will bear interest at a rate per annum equal to, at the election of the Company, the LIBOR rate or Wall Street Journal prime rate, plus an additional interest rate margin that is determined by the availability of borrowings under the Loan Agreement. The additional interest rate margin will range from 2.0% to 2.75% in the case of LIBOR advances and from 0% to 0.5% for prime rate advances. During an event of default, amounts due under the Loan Agreement will bear interest at a rate per annum equal to 5% above the rate otherwise applicable to such amounts. The Company paid SVB a commitment fee of $75,000 on execution of the Loan Agreement and will be required to pay $12,500 per annum thereafter, and is required to pay a quarterly unused facility fee equal to 0.30% - 0.50% per annum of the average daily unused portion of the commitments under the Credit Facility, depending upon availability of borrowings under the Credit Facility. At March 28, 2015, the Company had no loans outstanding under the Loan Agreement.
Our business requires greater levels of working capital than similar sized businesses in some other industries due to the value of the inventory we need to acquire to fill orders and the large accounts receivable we may hold due to the relatively high unit sales prices of our products. If orders increase we expect that working capital demands will also increase for some period before the associated cash flows are realized.
We believe that our existing cash, cash equivalents, short-term investments and our available credit facilities are adequate to fund our operations and contractual obligations for at least the next twelve months.
Contractual Obligations
The contractual commitments below represent our estimates of future payments under these obligations. The actual payments may differ from these estimates due to changes in our business needs, cancellation provisions, and other factors. We cannot provide certainty regarding the timing of the payment schedule and the amounts of payments.
The following table summarizes our contractual obligations as of March 28, 2015, by the fiscal year in which they are due:
(In thousands) | Total | 2016 | 2017 | 2018 | 2019 | 2020 | Thereafter | ||||||||||||||||||||
Purchase commitments | $ | 15,718 | $ | 15,565 | $ | 153 | $ | — | $ | — | $ | — | $ | — | |||||||||||||
Operating leases | 6,741 | 2,647 | 1,849 | 1,332 | 897 | 16 | — | ||||||||||||||||||||
$ | 22,459 | $ | 18,212 | $ | 2,002 | $ | 1,332 | $ | 897 | $ | 16 | $ | — | ||||||||||||||
The operating lease amounts include our contractual facilities lease obligation at our Chelmsford, Massachusetts plant, which will be closed in the fourth quarter of 2016 as a part of the Company’s plan to streamline its manufacturing and development activities.
This table does not include $9.7 million of unrecognized tax provisions due to the uncertainty with respect to the timing of future cash flows as of March 28, 2015. We are unable to make reasonably reliable estimates of the period of cash settlement with the respective taxing authorities and the total amounts of income tax payable and the timing of such tax payments may depend on the resolution of current and future tax examinations which cannot be estimated.
34
Critical Accounting Policies and Estimates
The preparation of our financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses. Our estimates are based on historical experience and on various assumptions that we believe to be reasonable under the circumstances. These estimates form the basis for judgments about the carrying values of assets and liabilities that are not readily apparent from other sources.
Our critical accounting policies and estimates include the following:
• | Revenue recognition; |
• | Inventory valuation; |
• | Product warranty reserves; |
• | Allowance for doubtful accounts; |
• | Accrued restructuring costs; |
• | Share-based compensation; |
• | Income taxes including the valuation of deferred tax assets; |
• | Fair value measurements; |
• | Valuation of cost method equity investments; |
• | Valuation of long-lived assets; and |
• | Valuation of goodwill. |
Revenue Recognition
We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to the customer at the time of delivery of the product to a common carrier. Revenue is recognized upon such delivery, provided that fulfillment of acceptance criteria can be demonstrated prior to shipment. Where the acceptance criteria cannot be demonstrated prior to shipment, or in the case of substantially new products, revenue is deferred until acceptance has been received. For multiple element arrangements, the relative fair values of any undelivered elements are deferred until the elements are delivered and acceptance criteria are met. Revenues are recorded net of taxes collected which are required to be submitted to government authorities. Installation services are not essential to the functionality of the delivered equipment and installation revenue is deferred until installation is complete. Historically, neither the costs of installation accrued nor the fair value of installation service revenue deferred has been material.
Revenues associated with sales to customers under local contracts in Japan are recognized upon title transfer, which generally occurs upon customer acceptance. Revenues related to spare parts and consumable sales are generally recognized upon shipment. Revenues related to maintenance and service contracts are recognized ratably over the duration of the contracts.
Inventory Valuation
We regularly evaluate the carrying value of inventory based on a combination of factors including, but not limited to, the following: product life cycle, forecasted sales or usage, historical usage rates, estimated service period, product end-of-life dates, estimated current and future market values, service inventory requirements and new product introductions. Purchasing requirements and alternative uses for the inventory are explored within these processes to mitigate inventory exposure. Inventory materials with quantities in excess of forecasted usage are reviewed quarterly for obsolescence. Obsolescence write-downs are typically caused by engineering change orders or product life cycle changes.
Research and development product costs are generally expensed as incurred. Engineering materials that are expected to provide future value are generally classified as raw materials inventory.
Finished goods are reviewed quarterly by product marketing and operating personnel to determine if inventory carrying value exceeds market selling prices. When necessary, we record inventory write-downs as an increase to cost of sales based on the above factors and take into account worldwide quantities on hand, product life cycle and forecasted demand into our analysis. Additionally, from time to time, we make strategic decisions to exit or alter product lines which may result in an inventory write-down. If circumstances related to our inventories change, our estimates of the value of inventory could materially change. The Company recorded $1.0 million of inventory write-off related charges for discontinued products in 2015.
Product Warranty Reserves
We evaluate obligations related to product warranties quarterly. A standard one-year warranty is provided on most products. Warranty charges are comprised of costs to service the warranty, including labor to repair the system and replacement parts for defective items, as well as other costs incidental to the repairs. Warranty charges are recorded net of any cost
35
recoveries resulting from either successful repair of damaged parts or from warranties offered by our suppliers for defective components. Using historical data, we estimate average warranty cost per system or part type and record the provision for such charges as an element of cost of goods sold upon recognition of the related revenue. Additionally, the overall warranty accrual balance is separately analyzed using the remaining warranty periods outstanding on systems and items under warranty, and any resulting changes in estimates are recorded as an adjustment to cost of sales. If circumstances change, or if a significant change in warranty-related incidents occurs, the impact of the change in the warranty accrual could be material. Accrued product warranty is included on the Consolidated Balance Sheets as a component of accrued liabilities.
Allowance for Doubtful Accounts
Credit limits are established by reviewing the financial history and stability of each customer. Where appropriate, we obtain credit rating reports and financial statements of customers to establish and modify their credit limits. On certain foreign sales, we require letters of credit. We regularly evaluate the collectability of our trade receivable balances based on a combination of factors. When a customer’s account becomes past due, we contact the customer to determine the cause. If we determine that a customer may be unable to fully meet its financial obligation to us, such as in the case of a bankruptcy filing or other material events impacting its business, we record a specific reserve for bad debt to reduce the related receivable to the amount we expect to recover based on all available information then available. If circumstances change related to specific customers, our estimates of the recoverability of receivables could materially change. We record estimated bad debt expense as an increase to selling, service and administration expenses.
Accrued Restructuring Costs
We have engaged, and may continue to engage, in restructuring actions, which require us to make estimates in certain areas including expenses for severance and other employee separation costs. Because we have a history of paying severance benefits, expenses and liabilities associated with exit or disposal activities are recognized when probable and estimable. For further discussion on the restructuring activities and related charges in 2015, refer to our discussion of “Restructuring Costs” in the “Results of Operations” section above.
Share-Based Compensation
We measure and recognize compensation expense for all share-based payment awards granted to our employees and directors, including employee stock options, stock-settled stock appreciation rights (SARs), non-vested restricted stock units and purchases under the employee stock purchase plan, based on the estimated fair value of the award on the grant date. We use the Black-Scholes valuation model as our method of valuation for stock option and SAR awards.
The use of the Black-Scholes valuation model to estimate the fair value of stock option and SAR awards requires us to make assumptions regarding the risk-free interest rate, expected dividend yield, expected term and expected volatility over the expected term of the award. The assumptions used in calculating the fair value of share-based payment awards represent management’s best estimates based on our historical data, but these estimates involve inherent uncertainties and the recognition of expense could be materially different in the future.
Compensation expense is only recognized on awards that are estimated to ultimately vest. Therefore, based on historical forfeiture rates and patterns, the estimated future forfeitures are factored into the compensation expense to be recognized over the vesting period. We update our forfeiture estimates at least annually and recognize any changes to accumulated compensation expense in the period of change. If actual forfeitures differ significantly from our estimates, our results of operations could be materially impacted.
Income Taxes
We are subject to income taxes in the United States and in numerous foreign jurisdictions and in the ordinary course of business, there are transactions and calculations where the ultimate tax determination is uncertain. We report a liability for unrecognized tax benefits resulting from uncertain tax positions taken or expected to be taken in a tax return. We recognize interest and penalties, if any, related to the unrecognized tax benefits in income tax expense.
In July 2013, the FASB issued ASU 2013-11, Income Taxes (Topic 740): Presentation of an Unrecognized Tax Benefit When a Net Operating Loss carryforward, a Similar Tax Loss, or a Tax Credit carryforward Exists, which the Company has adopted. This ASU requires an entity to present an unrecognized tax benefit as a reduction of a deferred tax asset for a net operating loss (NOL) carryforward, or similar tax loss or tax credit carryforward, rather than as a liability when the uncertain tax position would reduce the NOL or other carryforward under the tax law of the applicable jurisdiction, and the entity intends to use the deferred tax asset for that purpose.
36
Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those assets and liabilities are recovered or settled. The effect on deferred taxes of a change in tax rates is recognized in income in the period that includes the enactment date. When management determines that it is more likely than not that a deferred tax asset will not be fully realized, a valuation allowance is established to reduce deferred tax assets to the amount expected to be realized. As a result, at the end of fiscal 2013 we recorded a valuation allowance of $46.9 million against our U.S. deferred tax assets and attributes. The valuation allowance against our U.S. deferred tax assets and attributes was $79.9 million and $67.0 million at March 28, 2015 and March 29, 2014, respectively. Should management’s assumptions and expectations be inaccurate, our financial condition and results of operations could be adversely affected in future periods.
Fair Value Measurements
Fair value is defined under Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) Topic 820 “Fair Value Measurements and Disclosures” (ASC Topic 820). When determining fair value on the financial assets and liabilities, we consider the exchange price that would be received for an asset or paid to transfer a liability in an orderly transaction between market participants in the principal or most advantageous market. Valuation techniques used to measure fair value must maximize the use of observable inputs and minimize the use of unobservable inputs.
Valuation of Cost Method Equity Investments
The Company accounts for certain equity investments using the cost method. The total carrying value of these investments were $4.3 million at March 29, 2014 which represented the Company's investment in OmniGuide, Inc. At each reporting period end, the Company determined whether events or circumstances occurred that are likely to have a significant adverse effect on the fair value of the investment. In the fourth quarter of 2015, OmniGuide's lender exercised its right to convert the outstanding obligations owed to it by OmniGuide into 100% of OmniGuide's outstanding equity under the applicable financing agreements, thereby resulting in an immediate impairment of the Company's minority ownership of OmniGuide. The Company recorded an impairment of $4.3 million in the fourth quarter of 2015 and relinquished all holdings in this investment.
Valuation of Long-Lived Assets
The assumptions and estimates used to determine future values and remaining useful lives of our intangible and other long-lived assets are complex and subjective. They can be affected by various factors, including external factors such as industry and economic trends, and internal factors such as changes in our business strategy and our forecasts for specific product lines.
Identified Intangibles
We assess the recoverability of purchased finite-lived intangible assets whenever events or changes in circumstances indicate that an impairment may exist. Recoverability of finite-lived intangible assets is measured by comparing the carrying amount of the asset to the future undiscounted cash flows that the asset is expected to generate. There were no events or circumstances during 2015 that would indicate the carrying value of our long-lived assets may not be recoverable.
We perform an annual impairment assessment in the fourth quarter of each year for indefinite-lived intangible assets, or more frequently if indicators of potential impairment exist, to determine whether it is more likely than not that the carrying value of the assets may not be recoverable. Recoverability of indefinite-lived intangible assets is measured by comparing the carrying amount of the asset to the future discounted cash flows that the asset is expected to generate. If we determine that an individual asset is impaired, the amount of any impairment is measured as the difference between the carrying value and the fair value of the impaired asset.
Property, Plant and Equipment
Property, plant and equipment is reviewed for impairment whenever events or circumstances indicate that the carrying amount of assets may not be recoverable. We evaluate recoverability of assets to be held and used by comparing the carrying amount of an asset to estimated future net undiscounted cash flows to be generated by the asset. If such assets are considered to be impaired, the impairment recognized is measured as the amount by which the carrying amount of the assets exceeds the fair value of the assets.
Valuation of Goodwill
Goodwill is recorded when the purchase price for an acquisition exceeds the estimated fair value of the net tangible and identified intangible assets acquired. The carrying value of goodwill was $7.7 million as of March 28, 2015 and $7.9 million as of March 29, 2014. We perform an annual impairment assessment in the fourth quarter of each year, or more
37
frequently if indicators of potential impairment exist, to determine whether the fair value of the reporting unit is less than its carrying value. Fair value is determined based on the present value of estimated cash flows using available information regarding expected cash flows of the reporting unit, discount rates and the expected long-term cash flow growth rates. Discount rates are determined based on the cost of capital.
In performance of the annual review of goodwill, the Company conducted the first step of goodwill impairment test for all our newly formed reporting units and determined that the carrying value of the component processing and micromachining reporting units exceeded fair value. In accordance with ASC Topic 350, Intangibles-Goodwill and Other (Topic 350) and our accounting policies, we tested the Component Processing and Micromachining reporting units' goodwill for impairment using a step two analysis. As a result of that analysis, which is not complete, we recorded an estimated non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015. The primary driver of this impairment charge was our reorganization from a single reporting unit and operating segment to multiple reporting units and operating segments as of March 28, 2015, as well as a decline in revenues and operating and cash flow losses which changed the factors used in assessing goodwill. As a result of the reorganization and analysis at a segment and reporting unit level, any goodwill allocated to Component Processing and Micromachining was no longer supported by the estimated fair value of the respective businesses. Under our former reporting unit structure, goodwill was evaluated on the basis of a single reporting unit and fair value was estimated based on market capitalization plus a reasonable control premium.
Item 7A. Quantitative and Qualitative Disclosures about Market Risk
The primary objectives of our investment activities are to preserve principal and maintain liquidity to meet operating needs. To achieve these objectives, we maintain an investment portfolio of cash, cash equivalents, and investments in a variety of securities, including commercial paper, corporate bonds and U.S. government agency notes.
Interest Rate Risk
Our investment securities are subject to interest rate risk and will decline in value if interest rates increase. The majority of these securities are classified as available-for-sale securities; therefore, the impact on fair value of interest rate changes is reflected as a separate component of shareholders’ equity. Due to the short duration of our investment portfolio, an immediate 10% change in interest rates would not have a material effect on the fair value of our invested assets.
Investment Risk
Our marketable securities are classified as available-for-sale securities measured at fair value. The market value of our investments is influenced by market risks, liquidity risk and the credit worthiness of underlying issuers of our investment. We strive to minimize the investment risk by investing in high quality securities and by utilizing experienced and high credit quality financial institutions to manage the investment portfolio.
Foreign Currency Exchange Rate Risk
We purchase derivative financial instruments on a limited basis and do not use them for trading purposes. We do, however, use derivatives to manage well-defined foreign currency risks. We enter into forward exchange contracts to hedge the value of material non-functional currency monetary asset and liability balances. The net effect of an immediate 10% change in exchange rates on the forward exchange contracts and the underlying hedged positions would not be material to our financial position or the results of our operations.
The table below summarizes, by currency, the notional amounts of our forward exchange contracts in U.S. dollars as of March 28, 2015 and March 29, 2014. The “bought” amounts represent the net U.S. dollar equivalents of commitments to purchase foreign currencies, and the “sold” amounts represent the net U.S. dollar equivalents of commitments to sell foreign currencies. The foreign currency amounts have been translated into a U.S. dollar equivalent value using the exchange rates at the reporting date.
Bought (Sold) | |||||||
(In thousands) | 2015 | 2014 | |||||
Japanese Yen | $ | 4,263 | $ | 4,346 | |||
Euro | 10,354 | 13,322 | |||||
New Taiwan Dollar | (831 | ) | (440 | ) | |||
Korean Won | (3,000 | ) | (1,917 | ) | |||
British Pound | (2,906 | ) | (3,664 | ) | |||
Chinese Renminbi | (4,278 | ) | (1,917 | ) | |||
Singapore Dollar | (598 | ) | (716 | ) | |||
Canadian Dollar | (159 | ) | (136 | ) | |||
$ | 2,845 | $ | 8,878 | ||||
38
Item 8. Financial Statements and Supplementary Data
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
The Board of Directors and Shareholders
Electro Scientific Industries, Inc.:
We have audited the accompanying consolidated balance sheets of Electro Scientific Industries, Inc. and subsidiaries as of March 28, 2015 and March 29, 2014, and the related consolidated statements of operations, comprehensive loss, shareholders’ equity, and cash flows for each of the years in the three-year period ended March 28, 2015. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.
In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Electro Scientific Industries, Inc. and subsidiaries as of March 28, 2015 and March 29, 2014, and the results of their operations and their cash flows for each of the years in the three-year period ended March 28, 2015, in conformity with U.S. generally accepted accounting principles.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Electro Scientific Industries, Inc.’s internal control over financial reporting as of March 28, 2015, based on criteria established in Internal Control – Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated June 26, 2015 expressed an adverse opinion on the effectiveness of the Company’s internal control over financial reporting.
/s/ KPMG LLP
Portland, Oregon
June 26, 2015
39
ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
As of March 28, 2015 and March 29, 2014
(In thousands) | 2015 | 2014 | |||||
ASSETS | |||||||
Current assets: | |||||||
Cash and cash equivalents | $ | 50,994 | $ | 68,461 | |||
Short-term investments | 6,612 | 38,444 | |||||
Trade receivables, net of allowances of $712 and $404 | 45,951 | 37,813 | |||||
Inventories | 56,637 | 58,902 | |||||
Shipped systems pending acceptance | 2,516 | 2,054 | |||||
Deferred income taxes, net | 178 | 161 | |||||
Other current assets | 6,090 | 4,674 | |||||
Total current assets | 168,978 | 210,509 | |||||
Non-current assets: | |||||||
Non-current investments | — | 3,985 | |||||
Property, plant and equipment, net | 25,858 | 27,930 | |||||
Non-current deferred income taxes, net | 174 | 704 | |||||
Goodwill | 7,717 | 7,889 | |||||
Acquired intangible assets, net | 8,958 | 6,845 | |||||
Other assets | 9,555 | 12,347 | |||||
Total assets | $ | 221,240 | $ | 270,209 | |||
LIABILITIES AND SHAREHOLDERS’ EQUITY | |||||||
Current liabilities: | |||||||
Accounts payable | $ | 9,514 | $ | 14,465 | |||
Accrued liabilities | 20,237 | 20,524 | |||||
Deferred income tax liability, net | 173 | 170 | |||||
Deferred revenue | 12,376 | 10,515 | |||||
Total current liabilities | 42,300 | 45,674 | |||||
Non-current liabilities: | |||||||
Income taxes payable | 1,176 | 1,654 | |||||
Deferred income tax liability, net | 443 | — | |||||
Commitments and contingencies (Note 18) | |||||||
Shareholders’ equity: | |||||||
Preferred stock, without par value; 1,000 shares authorized; no shares issued | — | — | |||||
Common stock, without par value; 100,000 shares authorized; 30,704 and 30,155 issued and outstanding | 189,134 | 183,193 | |||||
(Accumulated deficit) retained earnings | (11,741 | ) | 39,336 | ||||
Accumulated other comprehensive (loss) income | (72 | ) | 352 | ||||
Total shareholders’ equity | 177,321 | 222,881 | |||||
Total liabilities and shareholders’ equity | $ | 221,240 | $ | 270,209 | |||
See Accompanying Notes to Consolidated Financial Statements
40
ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF OPERATIONS
For the years ended March 28, 2015, March 29, 2014 and March 30, 2013
(In thousands, except per share amounts) | 2015 | 2014 | 2013 | ||||||||
Net sales: | |||||||||||
Systems | $ | 111,603 | $ | 142,054 | $ | 183,531 | |||||
Service | 47,515 | 39,113 | 33,094 | ||||||||
Total net sales | 159,118 | 181,167 | 216,625 | ||||||||
Cost of sales: | |||||||||||
Systems | 78,195 | 100,870 | 133,141 | ||||||||
Service | 26,242 | 20,426 | 22,196 | ||||||||
Total cost of sales | 104,437 | 121,296 | 155,337 | ||||||||
Gross profit | 54,681 | 59,871 | 61,288 | ||||||||
Operating expenses: | |||||||||||
Selling, service and administration | 49,301 | 51,598 | 53,086 | ||||||||
Research, development and engineering | 35,166 | 37,839 | 37,196 | ||||||||
Impairment of goodwill | 7,889 | — | — | ||||||||
Restructuring costs | 2,069 | 1,070 | 2,612 | ||||||||
Gain on sale of property and equipment, net | — | (1,301 | ) | (1,226 | ) | ||||||
Gain on acquisition of Semiconductor Systems business | — | (499 | ) | — | |||||||
Legal settlement proceeds, net | — | — | (15,262 | ) | |||||||
Net operating expenses | 94,425 | 88,707 | 76,406 | ||||||||
Operating loss | (39,744 | ) | (28,836 | ) | (15,118 | ) | |||||
Non-operating (expense) income: | |||||||||||
Loss and other-than-temporary impairment of cost method investment | (4,263 | ) | (9,703 | ) | — | ||||||
Interest and other income, net | 430 | 113 | 253 | ||||||||
Total non-operating (expense) income | (3,833 | ) | (9,590 | ) | 253 | ||||||
Loss before income taxes | (43,577 | ) | (38,426 | ) | (14,865 | ) | |||||
Provision for (benefit from) income taxes | 234 | (92 | ) | 39,851 | |||||||
Net loss | $ | (43,811 | ) | $ | (38,334 | ) | $ | (54,716 | ) | ||
Net loss per share—basic | $ | (1.43 | ) | $ | (1.28 | ) | $ | (1.86 | ) | ||
Net loss per share—diluted | $ | (1.43 | ) | $ | (1.28 | ) | $ | (1.86 | ) | ||
Weighted average number of shares—basic | 30,611 | 29,974 | 29,357 | ||||||||
Weighted average number of shares—diluted | 30,611 | 29,974 | 29,357 | ||||||||
Cash dividends paid per outstanding common share | $ | 0.24 | $ | 0.32 | $ | 2.32 | |||||
See Accompanying Notes to Consolidated Financial Statements
41
ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF COMPREHENSIVE LOSS
For the years ended March 28, 2015, March 29, 2014 and March 30, 2013
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Net loss | $ | (43,811 | ) | $ | (38,334 | ) | $ | (54,716 | ) | ||
Other comprehensive (loss) income: | |||||||||||
Foreign currency translation adjustment, net of taxes of $0, $21 and $0 | (384 | ) | 37 | (198 | ) | ||||||
Accumulated other comprehensive (loss) income related to benefit plan obligation, net of taxes of ($13), $19, and $8 | (25 | ) | 22 | 9 | |||||||
Net unrealized (loss) gain on available-for-sale securities, net of taxes of ($5), $5, and $0 | (15 | ) | 9 | (34 | ) | ||||||
Comprehensive loss | $ | (44,235 | ) | $ | (38,266 | ) | $ | (54,939 | ) | ||
See Accompanying Notes to Consolidated Financial Statements
42
ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY
For the years ended March 28, 2015, March 29, 2014 and March 30, 2013
Common Stock | Retained Earnings (Accumulated Deficit) | Accumulated other comprehensive (loss) income | Total Shareholders’ Equity | |||||||||||||||
(In thousands) | Shares | Amount | ||||||||||||||||
Balance at March 31, 2012 | 28,970 | $ | 168,143 | $ | 210,021 | $ | 506 | $ | 378,670 | |||||||||
Cash dividends paid ($2.32 per outstanding common share) | — | — | (68,077 | ) | — | (68,077 | ) | |||||||||||
Employee stock plans | 613 | 8,488 | — | — | 8,488 | |||||||||||||
Net loss | — | — | (54,716 | ) | — | (54,716 | ) | |||||||||||
Other comprehensive loss | (223 | ) | (223 | ) | ||||||||||||||
Balance at March 30, 2013 | 29,583 | 176,631 | 87,228 | 283 | 264,142 | |||||||||||||
Cash dividends paid ($0.32 per outstanding common share) | — | — | (9,558 | ) | — | (9,558 | ) | |||||||||||
Employee stock plans | 592 | 6,753 | — | — | 6,753 | |||||||||||||
Share repurchases | (20 | ) | (191 | ) | — | — | (191 | ) | ||||||||||
Net loss | — | — | (38,334 | ) | — | (38,334 | ) | |||||||||||
Other comprehensive income | 69 | 69 | ||||||||||||||||
Balance at March 29, 2014 | 30,155 | 183,193 | 39,336 | 352 | 222,881 | |||||||||||||
Cash dividends paid ($0.24 per outstanding common share) | — | — | (7,266 | ) | — | (7,266 | ) | |||||||||||
Employee stock plans | 757 | 4,555 | — | — | 4,555 | |||||||||||||
Share repurchases | (208 | ) | (1,456 | ) | — | — | (1,456 | ) | ||||||||||
Business acquisition (Note 6) | — | 2,842 | — | — | 2,842 | |||||||||||||
Net loss | — | — | (43,811 | ) | — | (43,811 | ) | |||||||||||
Other comprehensive loss | (424 | ) | (424 | ) | ||||||||||||||
Balance at March 28, 2015 | 30,704 | $ | 189,134 | $ | (11,741 | ) | $ | (72 | ) | $ | 177,321 | |||||||
See Accompanying Notes to Consolidated Financial Statements
43
ELECTRO SCIENTIFIC INDUSTRIES, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
For the years ended March 28, 2015, March 29, 2014 and March 30, 2013
(In thousands) | 2015 | 2014 | 2013 | ||||||||
CASH FLOWS FROM OPERATING ACTIVITIES | |||||||||||
Net loss | $ | (43,811 | ) | $ | (38,334 | ) | $ | (54,716 | ) | ||
Adjustments to reconcile net loss to net cash (used in) provided by operating activities (net of acquisitions): | |||||||||||
Depreciation and amortization | 7,817 | 7,642 | 9,905 | ||||||||
Amortization of acquired intangible assets | 1,502 | 2,985 | 4,746 | ||||||||
Share-based compensation expense | 4,542 | 6,105 | 7,861 | ||||||||
Provision for doubtful accounts | 53 | — | — | ||||||||
(Gain) loss on sale of property and equipment, net | (6 | ) | (1,138 | ) | 680 | ||||||
Gain on acquisition of Semiconductor Systems business | — | (499 | ) | — | |||||||
Loss and other-than-temporary impairment of cost method investment | 4,263 | 9,703 | — | ||||||||
Impairment of goodwill | 7,889 | — | — | ||||||||
(Increase) decrease in deferred income taxes | (54 | ) | 4,377 | 40,971 | |||||||
Changes in operating accounts, net of acquisitions: | |||||||||||
(Increase) decrease in trade receivables, net | (7,965 | ) | (2,195 | ) | 1,232 | ||||||
Decrease in inventories | 1,091 | 7,567 | 3,564 | ||||||||
(Increase) decrease in shipped systems pending acceptance | (462 | ) | (1,047 | ) | 353 | ||||||
(Increase) decrease in other current assets | (200 | ) | (728 | ) | 633 | ||||||
(Decrease) increase in accounts payable and accrued liabilities | (4,013 | ) | (13,694 | ) | 2,550 | ||||||
Increase (decrease) in deferred revenue | 1,861 | 140 | (672 | ) | |||||||
Net cash (used in) provided by operating activities | (27,493 | ) | (19,116 | ) | 17,107 | ||||||
CASH FLOWS FROM INVESTING ACTIVITIES | |||||||||||
Purchase of investments | (414,705 | ) | (268,132 | ) | (1,061,654 | ) | |||||
Proceeds from sales and maturities of investments | 450,507 | 294,182 | 1,123,156 | ||||||||
Purchase of property, plant and equipment | (5,374 | ) | (7,583 | ) | (6,213 | ) | |||||
Proceeds from sale of property, plant and equipment | 154 | 3,657 | 2,030 | ||||||||
Decrease in restricted cash | — | — | 22,269 | ||||||||
Cash paid for business acquisitions, net of cash acquired | (7,737 | ) | (9,731 | ) | (9,466 | ) | |||||
Minority equity investment | — | (5,000 | ) | — | |||||||
(Increase) decrease in other assets | (2,638 | ) | 438 | 625 | |||||||
Net cash provided by investing activities | 20,207 | 7,831 | 70,747 | ||||||||
CASH FLOWS FROM FINANCING ACTIVITIES | |||||||||||
Cash dividends paid to shareholders | (7,266 | ) | (9,557 | ) | (68,077 | ) | |||||
Payment of withholding taxes on stock-based compensation | (1,850 | ) | (1,589 | ) | (1,910 | ) | |||||
Proceeds from issuance of common stock | 1,863 | 2,237 | 2,537 | ||||||||
Share repurchases | (1,456 | ) | (191 | ) | — | ||||||
Excess tax benefit of share-based compensation | — | — | 307 | ||||||||
Net cash used in financing activities | (8,709 | ) | (9,100 | ) | (67,143 | ) | |||||
Effect of exchange rate changes on cash | (1,472 | ) | (67 | ) | (1,578 | ) | |||||
NET CHANGE IN CASH AND CASH EQUIVALENTS | (17,467 | ) | (20,452 | ) | 19,133 | ||||||
CASH AND CASH EQUIVALENTS AT BEGINNING OF PERIOD | 68,461 | 88,913 | 69,780 | ||||||||
CASH AND CASH EQUIVALENTS AT END OF PERIOD | $ | 50,994 | $ | 68,461 | $ | 88,913 | |||||
SUPPLEMENTAL CASH FLOW INFORMATION | |||||||||||
Cash paid for interest | $ | (109 | ) | $ | — | $ | (21 | ) | |||
Cash paid for income taxes | $ | (1,157 | ) | $ | (3,256 | ) | $ | (1,823 | ) | ||
Income tax refunds received | $ | 633 | $ | 163 | $ | 890 | |||||
44
ELECTRO SCIENTIFIC INDUSTRIES, INC.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
1. The Company
Electro Scientific Industries, Inc. and its subsidiaries (ESI) is a leading supplier of innovative laser-based manufacturing solutions for the microtechnology industry. ESI's integrated solutions allow industrial designers and process engineers to control the power of laser light to transform materials in ways that differentiate their consumer electronics, wearable devices, semiconductor circuits and high-precision components for market advantage. Founded in 1944, ESI is headquartered in Portland, Oregon, with global operations and subsidiaries in Asia, Canada, Europe and the United States.
2. Summary of Significant Accounting Policies
Basis of Presentation
The accompanying consolidated financial statements include the accounts of Electro Scientific Industries, Inc. and its subsidiaries. All intercompany accounts and transactions have been eliminated.
The Company’s fiscal year consists of 52 or 53 weeks ending on the Saturday nearest March 31. Accordingly, the fiscal 2015 reporting period consisted of a 52-week period ending on March 28, 2015, the fiscal 2014 reporting period consisted of a 52-week period ending on March 29, 2014 and the fiscal 2013 reporting period consisted of a 52-week period ending on March 30, 2013. All references to years or quarters relate to fiscal years or fiscal quarters unless otherwise noted.
Estimates
The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States (GAAP) requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of commitments and contingencies at the date of the financial statements and the reported amounts of revenues and expenses during the reporting periods. Actual results may differ from those estimates.
Management believes that the estimates used are reasonable. Significant estimates made by management include: revenue recognition; inventory valuation; product warranty reserves; allowance for doubtful accounts; accrued restructuring costs; share-based compensation; income taxes including the valuation of deferred tax assets; fair value measurements; valuation of cost method equity investments; valuation of long-lived assets; and valuation of goodwill.
Risks and Uncertainties
The Company uses financial instruments that potentially subject it to concentrations of credit risk. Such instruments include cash equivalents, available-for-sale marketable securities, trade receivables and financial instruments used in hedging activities. The Company invests cash in cash deposits, money market funds, commercial paper, certificates of deposit and readily marketable securities. Investments are placed with high credit quality financial institutions and the credit exposure from any one institution or instrument is minimized. See Note 5 “Fair Value Measurements” for further discussion on these investments.
The Company sells a significant portion of its products to a small number of large semiconductor and microelectronics manufacturers. The top ten customers accounted for approximately 40%, 41% and 61% of total net sales in 2015, 2014 and 2013, respectively. One consumer electronics manufacturer accounted for approximately 9%, 15% and 31% of total net sales in 2015, 2014 and 2013, respectively. No other customer individually accounted for more than 10% of total net sales in 2015, 2014 or 2013. The Company’s operating results may be adversely affected if orders and revenues from these key customers decline.
The Company uses qualified manufacturers to supply many components and sub-system modules of its products. The systems that the Company manufactures use high-performance computers, peripherals, lasers and other components from various suppliers. The Company obtains some of the components from a single source or a limited group of suppliers. An interruption in the supply of a particular component would have a temporary adverse impact on the Company’s operating results.
The Company’s net investment exposure in foreign subsidiaries translated into U.S. dollars using the period-end exchange rates at March 28, 2015 and March 29, 2014 was approximately $64.3 million and $55.4 million, respectively. The potential loss in fair value resulting from a hypothetical 10% adverse change in foreign exchange rates would be approximately $6.4 million and $5.5 million at March 28, 2015 and March 29, 2014, respectively. Foreign exchange rate gains or losses on foreign investments as of March 28, 2015 were reflected as a cumulative translation adjustment, net of tax, and do not affect the Company’s results of operations.
45
The Company’s operations involve a number of other risks and uncertainties including but not limited to those relating to the cyclicality of the microelectronics and semiconductor markets, the effect of general economic conditions, rapid changes in technology and international operations.
Cash Equivalents and Investments
All highly liquid investments with a maturity of 90 days or less at the date of purchase are considered to be cash equivalents. Short-term investments reflect marketable securities that have maturities of less than one year or are subject to immediate pre-payment or call provisions. These securities consist primarily of marketable debt securities and are classified as “available-for-sale securities” and recorded at fair market value. Unrealized gains and losses on short-term investments are recorded as a component of accumulated other comprehensive income (loss). To determine whether any existing impairment is other-than-temporary and requires recognition of an impairment loss in the results of operations, the Company evaluates its marketable securities based on the nature of the investments and the Company’s intent and ability to hold the securities until the securities are no longer in an unrealized loss position.
Accounts Receivable and Allowance for Doubtful Accounts
Trade accounts receivable are stated at the amount the Company expects to collect and do not bear interest. Credit limits are established by reviewing the financial history and stability of each customer. Where appropriate, the Company obtains credit rating reports and financial statements of the customer to establish or modify credit limits. On certain foreign sales, letters of credit are obtained. The collectability of trade receivable balances is regularly evaluated based on a combination of factors such as customer reputation and credit-worthiness, past transaction history with the customer, current economic industry trends, and changes in customer payment terms. If it is determined or estimated that a customer will be unable to fully meet its financial obligation, such as in the case of a bankruptcy filing or other material events impacting its business, a specific reserve for bad debt is recorded to reduce the related receivable to the amount expected to be recovered.
Accrued Restructuring Costs
The Company has engaged, and may continue to engage, in restructuring actions, which require it to make estimates in certain areas including expenses for severance and other employee separation costs. Because the Company has a history of paying severance benefits, expenses associated with exit or disposal activities are recognized when probable and estimable. Should the actual amounts differ from our estimates, the amount of the restructuring charges could be materially impacted. See Note 24 “Restructuring and Cost Management Plans” for further discussion.
Inventories
Inventories are principally valued at standard costs, which approximate the lower of cost (first-in, first-out) or market. Costs utilized for inventory valuation purposes include material, labor and manufacturing overhead.
Shipped Systems Pending Acceptance
Shipped systems pending acceptance relate to systems that have been ordered and shipped to the customer, but have been deferred in accordance with the Company’s revenue recognition policy. Shipped systems pending acceptance are recognized as cost of sales once all criteria for revenue recognition have been met and revenue is recorded. Shipped systems pending acceptance are valued at standard costs, which approximate the lower of cost (first-in, first-out) or market. Costs utilized in the valuation of shipped systems pending acceptance include material, labor and manufacturing overhead and exclude costs of installation.
Property, Plant and Equipment
Property, plant and equipment are stated at cost less accumulated depreciation and amortization. Depreciation and amortization are provided using the straight-line basis over the estimated useful lives of the assets. Expenditures for maintenance, repairs and minor improvements are expensed as incurred. Major improvements and additions are capitalized. When assets are sold or retired, the cost and related accumulated depreciation and amortization are removed from the accounts and the resulting gain or loss is included as a component of operating expenses.
Long-Lived Asset Impairment
Long-lived assets, principally property, plant and equipment and identifiable long-lived intangibles, are reviewed for impairment whenever events or circumstances indicate that the carrying amount of the assets may not be recoverable. The Company evaluates recoverability of assets to be held and used by comparing the carrying amount of an asset to estimated future
46
net undiscounted cash flows generated by the asset. If such assets are considered to be impaired, the impairment recognized is measured as the amount by which the carrying amount of the assets exceeds the fair value of the assets.
The Company’s purchased patents are amortized over their estimated useful lives, generally 9 to 17 years.
Other purchased intangible assets with estimated useful lives are carried at cost less accumulated amortization. Amortization expense is recognized on a straight-line basis over the estimated useful lives of the intangible assets, which range from 1 to 10 years.
Goodwill Impairment
The Company accounts for goodwill pursuant to Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) Topic 350 as amended in September 2011 by Accounting Standard Update (ASU) 2011-08, “Intangibles-Goodwill and Other (ASC Topic 350): Testing Goodwill for Impairment” (ASC ASU 2011-08). ASC Topic 350 requires that goodwill be tested for impairment at least annually. ASC ASU 2011-08 permits an entity to make a qualitative assessment of whether it is more likely than not that a reporting units' fair value is less than its carrying amount before applying the two-step goodwill impairment test. The Company tests goodwill for impairment using a quantitative approach at least annually or between annual tests if an event occurs or circumstances change that would more likely than not reduce the fair value below the carrying value.
In the fourth quarter of 2015 we realigned our products into two segments as a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business. This reorganization required the Company to reassign its reported goodwill to its new reporting units based on the relative fair value of the respective reporting units, and perform an impairment analysis at the reporting unit level. Carrying value of each of the reporting units is determined based on an allocation of the Company's assets and liabilities to the reporting units using reasonable assumptions. If potential impairment is indicated by the step one test, the Company performs a step two test to determine the fair value of goodwill.
Other Assets
Other assets include consignment, demonstration (demo) and training equipment, minority equity investments and long-term deposits.
Consignment, demo and training equipment are recorded at the lower of standard costs or estimated market values, until the assets are sold.
The Company had a minority equity investment in the preferred stock of OmniGuide, Inc. (OmniGuide), a private company at a total carrying value of $4.3 million at March 29, 2014, which was included in other assets on the Consolidated Balance Sheets. The Company’s position in this investment was fully impaired and relinquished in the fourth quarter of 2015. See Note 12 “Other Assets” for further discussion and disclosure relating to this investment.
Fair Value of Financial Instruments
The carrying amounts of financial instruments, including cash equivalents and accrued liabilities approximate fair value because of the nature of the underlying transactions and short-term maturities involved. Current and non-current marketable securities are recorded at fair value which is defined under FASB ASC Topic 820 “Fair Value Measurements and Disclosures” (ASC Topic 820). ASC Topic 820 establishes a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value. These tiers include the following:
• | Level 1, defined as observable inputs such as quoted prices in active markets for identical assets or liabilities; |
• | Level 2, defined as inputs that are observable either directly or indirectly such as quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active and other inputs that can be corroborated by observable market data; and |
• | Level 3, defined as unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions. |
Derivative Financial Instruments
The Company’s primary objective for holding derivative financial instruments is to manage currency risk. The Company’s accounting policies for these instruments are based on whether they meet the Company’s criteria for designation as hedging transactions, either as cash flow or fair value hedges. A hedge of the exposure to variability in the cash flows of an asset or a
47
liability, or of a forecasted transaction, is referred to as a cash flow hedge. A hedge of the exposure to changes in fair value of an asset or a liability, or of an unrecognized firm commitment, is referred to as a fair value hedge. The criteria for designating a derivative as a hedge include the instrument’s effectiveness in risk reduction and, in most cases, a one-to-one matching of the derivative instrument to its underlying transaction. The Company enters into foreign currency exchange contracts to offset the earnings impact relating to the variability in exchange rates on certain short-term monetary assets and liabilities denominated in non-functional currencies. The Company does not designate these foreign currency contracts as hedges. The change in fair value of these derivative instruments not designated as hedging instruments is reported each period in other income (expense), net, in our Consolidated Statement of Operations.
Revenue Recognition
The Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or the services have been rendered, the sales price is fixed or determinable and collection of the related receivable is reasonably assured. Title and risk of loss generally pass to the customer at the time of delivery of the product to a common carrier. Revenue is recognized upon such delivery, provided that fulfillment of acceptance criteria can be demonstrated prior to shipment. Where the acceptance criteria cannot be demonstrated prior to shipment, or in the case of substantially new products, revenue is deferred until acceptance has been received. For multiple element arrangements, the relative fair value of any undelivered elements is deferred until the elements are delivered and acceptance criteria are met. Revenues are recorded net of taxes collected which are required to be submitted to government authorities. Installation services are not essential to the functionality of the delivered equipment and installation revenue is deferred until installation is complete. Neither the costs of installation accrued nor the fair value of installation service revenue deferred has been material.
Revenues associated with sales to customers under local contracts in Japan are recognized upon title transfer, which generally occurs upon customer acceptance. Revenues related to spare parts and consumable sales are generally recognized upon shipment. Revenues related to maintenance and service contracts are generally recognized ratably over the duration of the contracts.
Product Warranty
The Company evaluates obligations related to product warranties quarterly. A standard one-year warranty from the date of acceptance is provided on most products. Warranty charges are comprised of costs to service the warranty, including labor to repair the system and replacement parts for defective items, as well as other costs incidental to the repairs. Warranty charges are recorded net of any cost recoveries resulting from either successful repair of damaged parts or from warranties offered by the Company’s suppliers for defective components. Using historical data, the Company estimates average warranty cost per system or part type and records the provision for such charges as an element of cost of sales upon recognition of the related revenue. Additionally, the overall warranty accrual balance is separately analyzed using the remaining warranty periods outstanding on systems and items under warranty, and any resulting changes in estimates are recorded as an adjustment to cost of sales. If circumstances change, or if a significant change in warranty-related incidents occurs, the impact of the change in the warranty accrual could be material. Accrued product warranty is included on the Consolidated Balance Sheets as a component of accrued liabilities.
Research and Development
Research and development costs, which include labor and related employee expenses, patent maintenance fees, project materials costs, development tool placement and installation costs, project subcontractors, depreciation of engineering equipment, building costs and other administration expenses, are generally expensed as incurred. Engineering materials that are expected to provide future value are included in inventories.
Taxes on Unremitted Foreign Income
The Company provides for income taxes on its foreign subsidiaries’ taxable income based on the effective income tax rate in each respective jurisdiction. The Company provides for deferred taxes on the undistributed earnings of a subsidiary, except to the extent that the income is intended to be indefinitely reinvested or remitted in a tax-free liquidation. The foreign jurisdictions where the Company is permanently reinvested include Singapore and China (Topwin). The cumulative amount of earnings upon which U.S. income taxes have not been provided was $35.3 million and $28.8 million as of March 28, 2015 and March 29, 2014, respectively. The tax liability related to these earnings was $12.2 million and $10.0 million as of March 28, 2015 and March 29, 2014, respectively, which may be offset by foreign tax credits or other tax attributes.
Comprehensive Income (Loss)
48
Comprehensive income (loss) includes net income (loss) and other comprehensive income (loss), which includes charges or credits to equity that are not the result of transactions with shareholders. Comprehensive income (loss) within these consolidated financial statements includes primarily cumulative foreign currency translation adjustments and unrealized gains and losses on securities available for sale. The cumulative translation adjustment included in accumulated other comprehensive income (loss) at March 28, 2015 and March 29, 2014 was $30 thousand and $0.4 million, respectively.
Earnings Per Share
Basic earnings per share (EPS) is computed utilizing the weighted average number of shares outstanding during the period. Diluted EPS also considers common stock equivalents, such as stock options, stock-settled stock appreciation rights (SARs), employee stock purchase plan (ESPP) shares and restricted stock units, to the extent that they are not antidilutive.
Share-Based Compensation
The Company recognizes expense related to the fair value of its share-based compensation awards. The Company uses the Black-Scholes model to estimate the fair value of all share-based compensation awards on the date of grant, except for unvested restricted stock units, which are valued at the fair market value of the Company’s stock on the date of award. The Company recognizes the compensation expense for options, SARs and unvested restricted stock units on a straight-line basis over the requisite service period of the award.
Segment Reporting
The Company complies with ASC Topic 280 “Segment Reporting” (ASC Topic 280). ASC Topic 280, which is based on a management approach to segment reporting, establishes requirements to report selected segment information quarterly and to report annually entity-wide disclosures about products, major customers and the geographies in which the entity holds material assets and reports revenue. An operating segment is defined as a component that engages in business activities whose operating results are reviewed by the chief operating decision maker and for which discrete financial information is available. Based on the provisions of ASC Topic 280, the Company has determined that as of March 28, 2015 it operates in two segments: Component Processing and Micromachining. There are no differences between the accounting policies used for our business segments compared to those used on a consolidated basis.
Immaterial Revision to Prior Period Financial Statements
In the quarter ended March 28, 2015, we revised the presentation of certain amounts on our consolidated statements of operations from prior periods. We revised the presentation of net sales and cost of sales to separately present those amounts that are associated with service and support activities from those amounts associated with system sales. This change does not impact the Company’s previously reported total net sales, operating loss or net loss for the periods presented.
Additionally, the Company has historically included certain personnel expenses associated with the product support and service activities within the line item “Selling, service and administration” in its consolidated statements of operations. The Company has changed the presentation of certain of these expenses to include them as a component of service cost of sales to differentiate those costs attributed to generating revenue from those related to selling and administrative expenses. This revision does not impact the Company’s previously reported operating loss or net loss for the periods presented. The effect of this immaterial change on the consolidated statements of operations for each of the annual periods ending March 28, 2015, March 29, 2014, and March 30, 2013, and for each of the quarters for fiscal 2015 and 2014 is as follows:
49
1st Quarter | 2nd Quarter | 3rd Quarter | 4th Quarter | Year Ended | ||||||||||||||||||||||||||||||
(In thousands) | As Originally presented | As Revised | As Originally presented | As Revised | As Originally presented | As Revised | As Originally presented | As Revised | As Originally presented | As Revised | ||||||||||||||||||||||||
Year ended March 28, 2015 | ||||||||||||||||||||||||||||||||||
Total cost of sales | $ | 21,795 | $ | 22,742 | $ | 27,075 | $ | 28,091 | $ | 27,884 | $ | 28,948 | ||||||||||||||||||||||
Gross profit | 13,235 | 12,288 | 15,781 | 14,765 | 15,777 | 14,713 | ||||||||||||||||||||||||||||
Selling service & administrative | 13,100 | 12,153 | 12,915 | 11,899 | 13,397 | 12,333 | ||||||||||||||||||||||||||||
Net operating expenses | 22,245 | 21,298 | 21,339 | 20,323 | 21,780 | 20,716 | ||||||||||||||||||||||||||||
Year ended March 29, 2014 | ||||||||||||||||||||||||||||||||||
Total cost of sales | $ | 26,786 | $ | 27,713 | $ | 35,015 | $ | 36,065 | $ | 21,986 | $ | 23,066 | $ | 37,081 | $ | 38,179 | $ | 117,141 | $ | 125,023 | ||||||||||||||
Gross profit | 19,386 | 18,459 | 24,632 | 23,582 | 16,281 | 15,201 | 3,727 | 2,629 | 64,026 | 59,871 | ||||||||||||||||||||||||
Selling service & administrative | 14,547 | 13,620 | 14,251 | 13,201 | 12,408 | 11,328 | 14,516 | 13,418 | 55,753 | 51,567 | ||||||||||||||||||||||||
Net operating expenses | 22,508 | 21,581 | 23,935 | 22,885 | 20,875 | 19,795 | 25,544 | 24,446 | 92,862 | 88,707 | ||||||||||||||||||||||||
Year ended March 30, 2013 | ||||||||||||||||||||||||||||||||||
Total cost of sales | $ | 152,372 | $ | 155,337 | ||||||||||||||||||||||||||||||
Gross profit | 64,253 | 61,288 | ||||||||||||||||||||||||||||||||
Selling service & administrative | 56,051 | 53,086 | ||||||||||||||||||||||||||||||||
Net operating expenses | 79,371 | 76,406 | ||||||||||||||||||||||||||||||||
The revisions overall, which were not material, had no impact on the reported amounts of total net sales, net loss, net loss per share, cash flows or shareholders’ equity.
Employee Benefit Plans
The Company has an employee savings plan under the provisions of Section 401(k) of the Internal Revenue Code. During 2015 and 2014, contributions to the plan by the Company were $0.6 million and $0.2 million, respectively.
The Company has defined benefit retirement plans at certain of its foreign subsidiaries. The Company accounts for these plans based on the provisions of ASC Topic 715 “Compensation-Retirement Benefits”.
3. Recent Accounting Pronouncements
On May 28, 2014, the FASB issued ASU No. 2014-09, Revenue from Contracts with Customers, which requires an entity to recognize the amount of revenue to which it expects to be entitled for the transfer of promised goods or services to customers. The ASU will replace most existing revenue recognition guidance when it becomes effective. The new standard is effective for the Company on March 26, 2017. Early application is not permitted. The standard permits the use of either the retrospective or cumulative effect transition method. The Company is evaluating the effect that ASU 2014-09 will have on its consolidated financial statements and related disclosures. The Company has not yet selected a transition method nor has it determined the effect of the standard on its ongoing financial reporting.
4. Share-Based Compensation
The Company recognizes expense related to the fair value of its share-based compensation awards using the Black-Scholes model to estimate the fair value of awards on the date of grant, except for unvested restricted stock unit awards, which are valued at the fair market value of the Company’s stock on the date of award. The Company recognizes compensation expense for all share-based compensation awards on a straight-line basis over the requisite service period of the award.
Stock Plans
In October 2004, the shareholders approved the adoption of the 2004 Stock Incentive Plan (the 2004 Plan) that replaced various stock compensation plans that were previously approved by the shareholders or the Board of Directors (the Replaced Plans), except with respect to options and other awards previously outstanding. Outstanding options and awards remained
50
subject to the terms of the Replaced Plans under which they were originally granted. At that time, the shareholders also approved the reservation of 3,000,000 shares of common stock for issuance under the 2004 Plan. These shares are in addition to any shares of common stock that, at the time the 2004 Plan was approved by shareholders, were available for grant under the Replaced Plans or that may subsequently become available for grant under any of the Replaced Plans through the expiration, termination, forfeiture or cancellation of grants. In January 2005, the Board of Directors approved certain amendments to the 2004 Plan. These amendments prohibit grants of stock options or SARs with an exercise price less than fair market value, require that time-based restricted stock awards have a minimum vesting period of at least three years, with the subject shares vesting no more quickly than one-third annually over the three-year period, and expressly prohibit the reservation of additional shares under the 2004 Plan without shareholder approval. In October 2007, the shareholders approved an additional amendment to the 2004 Plan to permit awards to non-employee service providers and implement certain claw-back provisions. In August 2014, the 2004 Plan was amended to reduce the shares reserved for issuance by 1,000,000 shares and the 1990 Employee Stock Purchase Plan was amended to increase the shares reserved for issuance thereunder by 1,000,000 shares.
The 2004 Plan allows for grants of stock options, stock appreciation rights, stock bonuses (including restricted stock units), restricted stock, performance-based awards and dividend equivalents. Stock options and SARs outstanding under the 2004 Plan and the Replaced Plans vest over variable periods determined at the grant date, generally with terms of immediate vesting or up to four years, and expire ten years from the date of grant. Options and SARs issued under the 2004 Plan and the Replaced Plans are exercisable at prices not less than fair market value on the date of the grant. The 2004 Plan prohibits repricing of options and SARs granted without prior shareholder approval. Certain restricted stock units awarded under the 2004 Plan vest based on performance criteria that are tied to the Company’s results of operations, personal performance criteria, and, in certain cases, length of service. Unvested restricted stock unit awards are credited with dividend equivalents in the form of additional unvested restricted stock units at the same time and in the same amount as dividends paid to shareholders of the Company. The dividend equivalents have the same vesting and terms as the underlying restricted stock unit award and are subject to forfeiture if related awards do not vest.
In September 1990, the shareholders approved the adoption of the 1990 Employee Stock Purchase Plan, as amended in September 1998, October 2003, October 2004, January 2008, August 2009 and August 2014 (the ESPP), pursuant to which 4,400,000 shares of common stock have been reserved for issuance to participating employees. Eligible employees may elect to contribute up to 15 percent of their base wage and commissions during each pay period. The ESPP provides for separate overlapping twenty-four month offerings starting every three months. Each offering has eight purchase dates occurring every three months on designated dates. The offerings under the ESPP commence on February 15, May 15, August 15 and November 15 of each calendar year. Any eligible employee may participate in only one offering at a time and may purchase shares only through payroll deductions permitted under the ESPP. At the end of each three-month purchase period, the purchase price is determined and the accumulated funds are used to automatically purchase shares of common stock. The purchase price per share is equal to 85 percent of the lower of the fair market value of the common stock on (a) the first day of the offering period or (b) the date of purchase. The ESPP also provides that if the fair market value of the common stock on the first day of the new offering period is less than or equal to the fair market value of the common stock on the first date of any ongoing offering, employees participating in any such ongoing offering will be automatically withdrawn from it and enrolled in the new offering.
The Company granted SARs starting in the first quarter of 2010. SARs grant the right to receive shares of the Company’s stock equivalent to the increase in stock value of a specified number of shares over a specified period of time, divided by the stock price at the time of exercise. The Company uses the Black-Scholes model to estimate the fair value of SARs. Similar to options, SARs are recorded at the fair value of the award at grant date and the expense is recognized on a straight-line basis over the requisite service period of the award. The Company granted 634,523 and 63,853 SARs in 2015 and 2014 respectively, and did not grant any SARs in 2013.
Share-based compensation expense was included in the Company’s Consolidated Statements of Operations as follows:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Cost of sales | $ | 586 | $ | 722 | $ | 898 | |||||
Selling, service and administration | 2,847 | 4,213 | 5,330 | ||||||||
Research, development and engineering | 1,109 | 1,170 | 1,860 | ||||||||
Total share-based compensation expense | $ | 4,542 | $ | 6,105 | $ | 8,088 | |||||
Share-based compensation expense decreased in 2015 compared to 2014 primarily due to fewer restricted stock unit awards granted and lower stock price on grant dates, partially offset by an increased number of stock settled stock appreciation right awards granted. The share-based compensation expense decrease in 2014 compared to 2013 was primarily due to
51
decreased attainment of performance-based grants in 2014, award cancellations and to a lesser extent, fewer overall awards granted.
The total amount of net cash received from the stock plan awards was insignificant in 2015 and was $0.7 million and $0.6 million for 2014 and 2013, respectively. All stock plan awards are settled with newly issued shares.
No share-based compensation costs were capitalized during 2015, 2014 or 2013. As of March 28, 2015, the Company had $5.9 million of total unrecognized share-based compensation costs, net of estimated forfeitures, which are expected to be recognized over a weighted average period of 2.0 years.
Valuation Assumptions
The Black-Scholes option pricing model is utilized to determine the fair value of SARs granted. The following weighted average assumptions were used in calculating the fair value of SARs during the periods presented:
2015 | 2014 | 2013 | ||||||
Risk-free interest rate | 2.04 | % | 1.88 | % | 1.63 | % | ||
Expected dividend yield | 4.6 | % | 3.5 | % | 2.6 | % | ||
Expected lives | 7.0 years | 6.0 years | 1.5 years | |||||
Expected volatility | 47 | % | 45 | % | 47 | % | ||
The following weighted average assumptions were used to estimate the fair value of ESPP shares issued in the periods presented:
2015 | 2014 | 2013 | ||||||
Risk-free interest rate | 0.24 | % | 0.16 | % | 0.18 | % | ||
Expected dividend yield | 3.2 | % | 3.3 | % | 3.0 | % | ||
Expected lives | 1.1 years | 1.1 years | 1.1 years | |||||
Expected volatility | 41 | % | 37 | % | 43 | % | ||
The risk-free interest rates used are based on the U.S. Treasury yields over the expected terms. In December 2011, the Board of Directors adopted a dividend policy under which the Company made quarterly cash dividends payments. Accordingly, the Company paid a dividend of $0.08 per outstanding common share in first three quarters of 2015 and all four quarters of 2014 and 2013. In the fourth quarter of 2015, the Board of Directors suspended the quarterly dividend payment. The expected dividend yield used is derived using a mathematical formula which uses the expected Company annual dividend rate over the expected term divided by the fair value of the Company’s common stock at the grant date.
The expected term and forfeiture estimates for stock options and SARs are based on an analysis of actual exercise behavior. The expected term for the ESPP is the weighted average length of the purchase periods. The Company uses its historical volatility over the estimated expected term as the expected volatility.
At March 28, 2015, the Company had 6,045,139 shares of its common stock reserved for issuance under all of the above plans combined. Of those shares, 3,658,591 are subject to issuance under currently outstanding stock options, SARs and stock awards and 2,386,548 shares, including 945,645 shares available for issuance under the ESPP, are available for future grants. The total fair value of stock option and SARs awards granted and vested during the period, unvested restricted stock unit awards granted and vested during the period, the intrinsic value of stock options and SARs exercised during the period and the total grant date fair value were:
52
(In thousands, except per share data) | 2015 | 2014 | 2013 | ||||||||
Stock-Option and SAR Awards: | |||||||||||
Grant date fair value per share | $ | 2.12 | $ | 2.94 | $ | 4.82 | |||||
Total fair value of options and SARs granted | $ | 1,291 | $ | 188 | $ | 25 | |||||
Total fair value of options and SARs vested | $ | 409 | $ | 1,305 | $ | 2,050 | |||||
Total intrinsic value of options and SARs exercised | $ | 18 | $ | 183 | $ | 230 | |||||
Unvested Restricted Stock Unit Awards: | |||||||||||
Grant date fair value per share | $ | 6.80 | $ | 10.19 | $ | 8.05 | |||||
Total fair value of awards granted | $ | 5,832 | $ | 6,865 | $ | 7,026 | |||||
Total fair value of awards vested | $ | 7,532 | $ | 5,251 | $ | 6,266 | |||||
Employee Stock Purchase Plan: | |||||||||||
Grant date fair value per share | $ | 1.72 | $ | 2.61 | $ | 3.22 | |||||
Total grant date fair value | $ | 559 | $ | 699 | $ | 869 | |||||
Share-Based Payment Award Activity
Information with respect to stock option and SAR activity was as follows:
Shares | Weighted Average Exercise Price | Weighted Average Remaining Contractual Term (In years) | Aggregate Intrinsic Value (In thousands) | |||||||||
Exercisable at March 29, 2014 | 1,898,409 | $ | 15.27 | |||||||||
Granted | 634,523 | 6.91 | ||||||||||
Exercised | (8,250 | ) | 7.26 | |||||||||
Expired or forfeited | (295,636 | ) | 18.30 | |||||||||
Outstanding at March 28, 2015 | 2,229,046 | $ | 12.52 | 4.45 | $ | — | ||||||
Vested and expected to vest at March 28, 2015 | 2,195,313 | $ | 12.60 | 4.37 | $ | — | ||||||
Exercisable at March 28, 2015 | 1,556,978 | $ | 14.61 | 2.43 | $ | — | ||||||
Information with respect to unvested time-based restricted stock unit awards activity was as follows:
Shares | Weighted Average Grant Date Fair Value | Weighted Average Remaining Contractual Term (In years) | Aggregate Intrinsic Value (In thousands) | |||||||||
Outstanding at March 29, 2014 | 1,115,601 | $ | 11.47 | |||||||||
Awarded | 459,295 | 6.33 | ||||||||||
Vested | (672,930 | ) | 11.19 | |||||||||
Forfeited | (66,125 | ) | 9.82 | |||||||||
Outstanding at March 28, 2015 | 835,841 | $ | 8.90 | 1.91 | $ | 5,149 | ||||||
Information with respect to unvested performance-based restricted stock unit awards activity was as follows:
53
Shares | Weighted Average Grant Date Fair Value | Weighted Average Remaining Contractual Term (In years) | Aggregate Intrinsic Value (In thousands) | |||||||||
Outstanding at March 29, 2014 | 396,533 | $ | 10.33 | |||||||||
Awarded | 398,905 | 7.33 | ||||||||||
Vested | (234 | ) | — | |||||||||
Forfeited | (201,500 | ) | 11.63 | |||||||||
Outstanding at March 28, 2015 | 593,704 | $ | 7.88 | 1.81 | $ | 3,657 | ||||||
Additionally, the Company will grant approximately 513,328 shares valued at $2.3 million, as compensation to a Principal in the Company who was also a former shareholder of Topwin. The compensation will be recognized over the term of the principle's employment agreement with the Company per the purchase contract. See Note 6 "Business Acquisition” for discussion.
5. Fair Value Measurements
Financial Assets Measured at Fair Value
ASC Topic 820 establishes a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value. These tiers include the following:
• | Level 1, defined as observable inputs such as quoted prices in active markets for identical assets or liabilities; |
• | Level 2, defined as inputs that are observable either directly or indirectly such as quoted prices for similar assets or liabilities in active markets, quoted prices for identical or similar assets or liabilities in markets that are not active and other inputs that can be corroborated by observable market data; and |
• | Level 3, defined as unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions. |
54
The Company’s fair value hierarchy for its financial assets measured at fair value on a recurring basis as of March 28, 2015 and March 29, 2014 was as follows (in thousands):
March 28, 2015 | Level 1 | Level 2 | Level 3 | Total | |||||||||||
Money market securities | $ | 14,280 | $ | — | $ | — | $ | 14,280 | |||||||
Commercial paper | — | 15,537 | — | 15,537 | |||||||||||
Municipal bonds | — | 3,872 | — | 3,872 | |||||||||||
Government agencies | — | 2,702 | — | 2,702 | |||||||||||
Corporate bonds | — | 853 | — | 853 | |||||||||||
Forward purchase or (sale) contracts: | |||||||||||||||
Japanese Yen | — | (7 | ) | — | (7 | ) | |||||||||
New Taiwan Dollar | — | 17 | — | 17 | |||||||||||
Korean Won | — | (44 | ) | — | (44 | ) | |||||||||
Euro | — | 277 | — | 277 | |||||||||||
British Pound | — | (133 | ) | — | (133 | ) | |||||||||
Chinese Renminbi | — | (34 | ) | — | (34 | ) | |||||||||
March 29, 2014 | Level 1 | Level 2 | Level 3 | Total | |||||||||||
Money market securities | $ | 9,456 | $ | — | $ | — | $ | 9,456 | |||||||
Corporate bonds | — | 17,328 | — | 17,328 | |||||||||||
Municipal bonds | — | 12,725 | — | 12,725 | |||||||||||
Government agencies | — | 8,037 | — | 8,037 | |||||||||||
Commercial paper | — | 6,700 | — | 6,700 | |||||||||||
Forward purchase or (sale) contracts: | |||||||||||||||
Japanese Yen | — | 25 | — | 25 | |||||||||||
New Taiwan Dollar | — | (6 | ) | — | (6 | ) | |||||||||
Korean Won | — | (44 | ) | — | (44 | ) | |||||||||
Euro | — | 39 | — | 39 | |||||||||||
British Pound | — | (19 | ) | — | (19 | ) | |||||||||
Chinese Renminbi | — | (2 | ) | — | (2 | ) | |||||||||
Singapore Dollar | $ | — | $ | 1 | $ | — | $ | 1 | |||||||
For Level 1 assets, the Company utilized quoted prices in active markets for identical assets.
For Level 2 assets, exclusive of forward contracts, the Company utilized quoted prices in active markets for similar assets. For forward contracts, spot prices at March 28, 2015 and March 29, 2014 were utilized to calculate fair values.
During 2015 and 2014, there were no transfers between Level 1, 2 or 3 assets.
55
Investments
Certain information regarding the Company’s investments at March 28, 2015 and March 29, 2014 was as follows (in thousands):
Unrealized | |||||||||||||||
March 28, 2015 | Cost | Gain | Loss | Fair Value | |||||||||||
Available-for-sale securities (current): | |||||||||||||||
Commercial paper | $ | 15,537 | $ | — | $ | — | $ | 15,537 | |||||||
Municipal bonds | 3,870 | 2 | — | 3,872 | |||||||||||
Government agencies | 2,702 | — | — | 2,702 | |||||||||||
Corporate bonds | 853 | — | — | 853 | |||||||||||
$ | 22,962 | $ | 2 | $ | — | $ | 22,964 | ||||||||
Available-for-sale securities (non-current): | |||||||||||||||
$ | — | $ | — | $ | — | $ | — | ||||||||
$ | — | $ | — | $ | — | $ | — | ||||||||
Unrealized | |||||||||||||||
March 29, 2014 | Cost | Gain | Loss | Fair Value | |||||||||||
Available-for-sale securities (current): | |||||||||||||||
Commercial paper | $ | 6,700 | $ | — | $ | — | $ | 6,700 | |||||||
Government agencies | 8,035 | 2 | — | 8,037 | |||||||||||
Corporate bonds | 17,321 | 7 | — | 17,328 | |||||||||||
Municipal bonds | 8,737 | 4 | — | 8,741 | |||||||||||
$ | 40,793 | $ | 13 | $ | — | $ | 40,806 | ||||||||
Available-for-sale securities (non-current): | |||||||||||||||
Municipal bonds | 3,976 | 9 | — | 3,985 | |||||||||||
$ | 3,976 | $ | 9 | $ | — | $ | 3,985 | ||||||||
For purposes of determining gross realized gains and losses and reclassification out of accumulated other comprehensive income (loss), the cost of securities sold is based on specific identification. Net unrealized holding gains and losses on current available-for-sale securities included in accumulated other comprehensive income (loss) were insignificant as of March 28, 2015 and March 29, 2014.
At March 28, 2015, $23.0 million in investments had maturities within one year.
6. Business Acquisition
Fiscal 2015
On January 15, 2015, the Company acquired all of the outstanding shares of Wuhan Topwin Optoelectronics Technology Co., Ltd. (Topwin), a Chinese manufacturer of laser-based systems, for $7.7 million in cash and 748,944 shares issuable over a three year period, valued at approximately $2.8 million as of the acquisition date. Out of the $2.8 million in equity, approximately one-half, or 374,472 shares, is contingent-based consideration and one-half, or 374,472 shares, is non-contingent and will be issued over a three year period beginning June 30, 2015. The contingent consideration is based on future performance of the acquiree, as evaluated against targets for net income for each year over a three year period. One-third of the contingent shares will be issued after each year if the target is met for that year, however failing to meet stated targets will result in none of the contingent shares being issued for that year. As of the acquisition date, the fair value of 374,472 shares of contingent consideration was estimated to be $0.3 million and the 374,472 shares of non-contingent equity consideration was estimated to be $2.5 million. The fair value of the non-contingent and contingent shares to be issued over the three year period is determined based on the estimated share price as of the issuance date derived through Monte Carlo simulation, discounted back to the acquisition date. The value of the contingent shares includes consideration of the estimated probability of attainment of the net income targets. Analysis supporting the preliminary purchase price allocation included a valuation of assets and liabilities as of the closing date, an analysis of intangible assets and a detailed review of the opening balance sheet to determine other significant adjustments required to recognize assets and liabilities at fair value. Additionally, the Company will grant, on the same terms described above, approximately 513,328 shares valued at $2.3 million, as compensation to a Principal in the Company who was also a former shareholder of Topwin. The compensation will be recognized over the term of the Principal's employment agreement with the Company per the purchase contract.
56
The total purchase price of approximately $10.6 million, net of cash acquired, was allocated to the underlying assets acquired and liabilities assumed based on their fair values. The allocation of purchase price to goodwill and identifiable assets and liabilities is subject to the final determination of purchase price, as the purchase price and asset values are subject to valuation and contractual adjustments of working capital, which has not been settled.
The following table presents the allocation of the purchase price of $10.6 million to the assets acquired and liabilities assumed based on their fair values:
(In thousands) | |||
Accounts receivable, net of allowances of $268 | $ | 454 | |
Inventory | 544 | ||
Prepaid expense and other current assets | 86 | ||
Property, plant and equipment | 23 | ||
Acquired intangibles | 3,618 | ||
Goodwill | 7,717 | ||
Accounts payable and other accrued liabilities | (1,859 | ) | |
Total purchase price, net of cash acquired | $ | 10,583 | |
The acquisition is expected to enable the Company to gain entry into the low total-cost-of-ownership solutions market in China. The Company has preliminarily allocated approximately $7.7 million of the purchase price to goodwill, which was assigned to the Topwin reporting unit. The premium paid over the fair value of the individual assets acquired and liabilities assumed reflects the Company’s view that this acquisition was the result of a competitive bid process and has provided the Company with innovative design and manufacturing capabilities for laser-based manufacturing solutions across a variety of complementary applications, together with direct access to local China market, supply chain and opto-electronics knowledge center. None of the goodwill is expected to be deductible for tax purposes.
As a result of the acquisition, the Company recorded approximately $4.7 million of net identifiable assets including $3.6 million of identifiable intangible assets and $1.9 million of identifiable liabilities. The acquired intangible assets consist primarily of $3.5 million of developed technology and will be amortized over their useful lives, which range from one to ten years.
In 2015, the Company also incurred approximately $0.8 million in acquisition-related costs which are included in selling, service and administration expenses in the Consolidated Statements of Operations. The operating results of this acquisition are included in the Company’s results of operations since the date of acquisition. Pro forma financial information has not been provided for the acquisition of Topwin as it was not material to the Company’s current year operations and overall financial position.
Fiscal 2014
On May 3, 2013, the Company completed the purchase of assets related to the Semiconductor Systems business of GSI Group Inc. for a total purchase price of $9.7 million. The acquisition provided the Company with direct access to industry-leading wafer marking, wafer trimming and circuit trimming laser systems. The purchase price was allocated to the underlying assets acquired and liabilities assumed based on their fair values and resulted in a net gain on bargain purchase of $0.5 million. The fair value of the acquired net assets of $10.5 million was in excess of the total purchase consideration of $9.7 million, primarily due to the recognition of certain intangible assets. The resulting gain of $0.8 million was partially offset by $0.3 million of deferred tax liabilities. Analysis supporting the purchase price allocation included a valuation of assets and liabilities as of the closing date, an analysis of intangible assets and a detailed review of the opening balance sheet to determine other significant adjustments required to recognize assets and liabilities at fair value. The acquisition was an asset purchase for tax purposes.
As a result of the acquisition, the Company recorded approximately $8.2 million of inventory, $3.9 million of accounts receivable and other current assets, $0.7 million of identifiable intangible assets, $2.3 million of current liabilities, and a gain on bargain purchase of $0.8 million. The $0.7 million of identifiable intangible assets includes approximately $0.5 million of backlog and $0.2 million of developed technology. The acquired intangibles are amortized over their estimated useful lives, which range from one to three years.
In 2014, the Company also incurred approximately $1.5 million in acquisition related costs which are included in selling, service and administration expenses in the Condensed Consolidated Statements of Operations.
The operating results of this purchase are included in the Company’s results of operations since the date of acquisition. Pro forma financial information has not been provided for the purchase as it was not material to the Company’s overall financial position.
57
7. Inventories
The components of inventories at March 28, 2015 and March 29, 2014 were as follows:
(In thousands) | 2015 | 2014 | |||||
Raw materials and purchased parts | $ | 37,991 | $ | 38,747 | |||
Work-in-process | 14,834 | 12,914 | |||||
Finished goods | 3,812 | 7,241 | |||||
$ | 56,637 | $ | 58,902 | ||||
In 2015 and 2014, the Company recorded a charge against inventory for write-offs associated with discontinued products of $1.0 million and $12.8 million, respectively. See Note 25 "Restructuring and Cost Management Plans" for further discussion on 2015 write-off.
8. Other Current Assets
Other current assets at March 28, 2015 and March 29, 2014 consisted of the following:
(In thousands) | 2015 | 2014 | |||||
Prepaid expenses | $ | 2,595 | $ | 2,601 | |||
Value added tax receivable | 802 | 779 | |||||
Acquisition related receivable | $ | 1,180 | $ | — | |||
Other | 1,513 | 1,294 | |||||
$ | 6,090 | $ | 4,674 | ||||
9. Property, Plant and Equipment
Property, plant and equipment as of March 28, 2015 and March 29, 2014 consisted of the following:
(In thousands) | Estimated Useful Lives | 2015 | 2014 | ||||||
Land | n/a | $ | 2,152 | $ | 2,068 | ||||
Buildings and improvements | 3 to 40 years | 37,841 | 38,471 | ||||||
Machinery and equipment | 3 to 10 years | 53,781 | 51,442 | ||||||
Computer equipment and software | 1 to 7 years | 34,985 | 34,282 | ||||||
128,759 | 126,263 | ||||||||
Less accumulated depreciation | (102,901 | ) | (98,333 | ) | |||||
$ | 25,858 | $ | 27,930 | ||||||
Depreciation expense totaled $7.2 million, $7.1 million and $9.2 million in 2015, 2014 and 2013, respectively. For the year ended March 28, 2015, the Company performed a review for impairment based on certain triggering events. As a result of this review, no impairments of property, plant and equipment were identified. Accounts payable includes $0.4 million for amounts owed on property, plant and equipment purchases as of March 28, 2015.
10. Goodwill
The Company had $7.7 million and $7.9 million in goodwill as of March 28, 2015 and March 29, 2014, respectively. In the fourth quarter of 2015 we realigned our products into two segments as a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business. This reorganization required the Company to reassign its reported goodwill to its new reporting units based on the relative fair value of the respective reporting units. The carrying value of goodwill by reporting unit was approximately $7.7 million for Topwin, $6.3 million for Component Processing and $1.6 million for Micromachining. The Company reviews its goodwill for impairment annually, or more frequently, if events or circumstances indicate that the carrying value of the reporting unit exceeds its fair value. Fair value is determined based on the present value of estimated cash flows for the reporting unit developed using available industry and market information, discount rates and the expected long-term cash flow growth rates. Discount rates are determined based on the cost of capital.
58
In performance of the annual review of goodwill, the Company conducted the first step of goodwill impairment test for all our newly formed reporting units and determined that the carrying value of the component processing and micromachining reporting units exceeded fair value. In accordance with ASC Topic 350, Intangibles-Goodwill and Other (Topic 350) and our accounting policies, we tested the Component Processing and Micromachining reporting units' goodwill for impairment using a step two analysis. As a result of that analysis, which is not complete, we recorded an estimated non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015. The primary driver of this impairment charge was our reorganization from a single reporting unit and operating segment to multiple reporting units and operating segments as of March 28, 2015, as well as a decline in revenues and operating and cash flow losses which changed the factors used in assessing goodwill. As a result of the reorganization and analysis at a segment and reporting unit level, any goodwill allocated to Component Processing and Micromachining was no longer supported by the estimated fair value of the respective businesses. Under our former reporting unit structure, goodwill was evaluated on the basis of a single reporting unit and fair value was estimated based on market capitalization plus a reasonable control premium.
See Note 6 "Business Acquisition" for further discussion on Topwin goodwill.
11. Acquired Intangible Assets
Acquired intangible assets as of March 28, 2015 and March 29, 2014 consisted of the following:
(In thousands, except years) | Weighted Average Useful Life (In years) | 2015 | 2014 | ||||||
Developed technology | 6.7 | $ | 20,001 | $ | 13,315 | ||||
Customer relationships | 5.6 | 3,154 | 3,154 | ||||||
Customer backlog | 0.9 | 1,341 | 1,250 | ||||||
Trade name and trademarks | 3 | 463 | 463 | ||||||
Fair value of below-market lease (non-current portion) | 3.8 | 310 | 310 | ||||||
Change of control agreements | 1 | 100 | 100 | ||||||
Patents | 12.9 | 3,469 | 3,427 | ||||||
In-process research and development | Indefinite | — | 3,204 | ||||||
28,838 | 25,223 | ||||||||
Less accumulated amortization | (19,880 | ) | (18,378 | ) | |||||
Total acquired intangible assets | $ | 8,958 | $ | 6,845 | |||||
We performed a review of our acquired intangible assets in the fourth quarter of 2015, including a review for impairment based on certain triggering events and no significant impairments of intangible assets were detected.
Amortization expense for acquired intangible assets has been recorded on the Consolidated Statements of Operations as follows:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Cost of sales | $ | 1,095 | $ | 2,293 | $ | 4,239 | |||||
Selling, service and administration | 210 | 212 | 305 | ||||||||
Research, development and engineering | 197 | 480 | 240 | ||||||||
$ | 1,502 | $ | 2,985 | $ | 4,784 | ||||||
The estimated amortization expense for acquired intangible assets in future years is as follows (in thousands):
59
Year | Amortization | ||
2016 | $ | (1,375 | ) |
2017 | (1,208 | ) | |
2018 | (1,199 | ) | |
2019 | (1,199 | ) | |
2020 | (1,147 | ) | |
Future years | (2,830 | ) | |
$ | (8,958 | ) | |
12. Other Assets
Other assets consisted of the following as of March 28, 2015 and March 29, 2014:
(In thousands) | 2015 | 2014 | |||||
Minority equity investment | $ | — | $ | 4,263 | |||
Consignment and demo equipment, net | 7,164 | 5,938 | |||||
Long term deposits and other | 2,391 | 2,146 | |||||
$ | 9,555 | $ | 12,347 | ||||
Minority equity investment represented the Company's investment in OmniGuide, Inc., which was accounted for as a cost method investment. At each reporting period end, the Company determined whether events or circumstances occurred that are likely to have a significant adverse effect on the fair value of the investment.
The total carrying value of this investment was zero at March 28, 2015 and $4.3 million at March 29, 2014. In the fourth quarter of 2015, OmniGuide's lender exercised its right to convert the outstanding obligations owed to it by OmniGuide into 100% of OmniGuide's outstanding equity under the applicable financing agreements, thereby resulting in an immediate impairment of the Company's minority ownership of OmniGuide. The Company recorded an impairment of $4.3 million in the fourth quarter of 2015 and relinquished all holdings in this investment.
Depreciation expense for demo equipment totaled $0.6 million in each of 2015 and 2014, and $0.7 million in 2013.
13. Income Taxes
The Company accounts for income taxes under the asset and liability method. Under this method, deferred income taxes are recognized for the future tax consequences attributable to temporary differences between the financial statement and tax balances of existing assets and liabilities. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those assets and liabilities are expected to be recovered or settled. The effect on deferred taxes resulting from a change in tax rates is recognized in income in the period that includes the enactment date. When management determines that it is not more likely than not that a deferred tax asset will be fully realized, a valuation allowance is established to reduce deferred tax assets to the amount expected to be realized.
60
Net deferred tax assets and liabilities at March 28, 2015 and March 29, 2014 consisted of the following:
(In thousands) | 2015 | 2014 | |||||
Deferred tax assets and liabilities: | |||||||
Current | |||||||
Inventory valuation and warranty costs | $ | 10,781 | $ | 13,650 | |||
Receivables and other current assets | (272 | ) | (311 | ) | |||
Payroll-related accruals | 1,288 | 1,594 | |||||
Accrued liabilities | 2,382 | 926 | |||||
Deferred revenue | 3,368 | 2,900 | |||||
Other | 1,029 | (161 | ) | ||||
Total current deferred tax assets | 18,576 | 18,598 | |||||
Valuation allowance, current | (18,571 | ) | (18,607 | ) | |||
Net current deferred tax assets (liabilities) | $ | 5 | $ | (9 | ) | ||
Non-current | |||||||
Deferred compensation | $ | 4,704 | $ | 6,482 | |||
Intangible assets and investments | (1,677 | ) | 2,446 | ||||
Accrued liabilities | 454 | 186 | |||||
Property, plant and equipment | 5,187 | 4,634 | |||||
Other comprehensive income | (112 | ) | (253 | ) | |||
Tax loss and credit carryforwards | 59,137 | 42,324 | |||||
Other assets | 1,049 | 1,473 | |||||
Total non-current deferred tax assets | 68,742 | 57,292 | |||||
Valuation allowance, non-current | (69,011 | ) | (56,588 | ) | |||
Net non-current deferred tax (liabilities) assets | $ | (269 | ) | $ | 704 | ||
Total deferred tax assets | $ | 87,318 | $ | 75,890 | |||
Total valuation allowance | (87,582 | ) | (75,195 | ) | |||
Net deferred tax (liabilities) assets | $ | (264 | ) | $ | 695 | ||
The Company had approximately $68.5 million and $49.7 million in tax assets resulting from federal, state and foreign net operating losses and tax credits as of March 28, 2015 and March 29, 2014, respectively as follows:
(In thousands) | 2015 | 2014 | |||||
Federal net operating losses | $ | 19,785 | $ | 7,691 | |||
State net operating losses | 3,467 | 3,100 | |||||
Foreign operating losses and tax credits | 11,433 | 11,527 | |||||
Federal research credits | 19,670 | 18,332 | |||||
State research credits | 4,287 | 3,953 | |||||
Federal minimum tax credit | 1,049 | 1,106 | |||||
Federal capital losses | 8,855 | 4,024 | |||||
$ | 68,546 | $ | 49,733 | ||||
The federal and state net operating losses expire on various dates through fiscal 2035. The majority of the foreign tax credits expire on various dates through fiscal 2025. The federal and most of the state research credits expire on various dates through fiscal 2035. Certain state research credits and the federal minimum tax credits are available indefinitely. The state net operating losses and credits are reflected net of their federal tax impact.
A valuation allowance is required if it is more likely than not that all or a part of a deferred tax asset will not be realized in the future. A valuation allowance of $87.6 million and $75.2 million was recorded as of March 28, 2015 and March 29, 2014, respectively. The valuation allowance increased by $12.4 million in 2015 primarily due to higher net operating losses, tax credits and capital losses.
61
The components of income before income taxes and the (benefit from) provision for income taxes, all from continuing operations, were as follows:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Loss before income taxes: | |||||||||||
Domestic | $ | (39,656 | ) | $ | (37,739 | ) | $ | (16,935 | ) | ||
Foreign | (3,921 | ) | (687 | ) | 2,070 | ||||||
Total loss before income taxes | $ | (43,577 | ) | $ | (38,426 | ) | $ | (14,865 | ) | ||
Provision for (benefit from) income taxes: | |||||||||||
Current: | |||||||||||
U.S. federal and state | $ | (983 | ) | $ | (605 | ) | $ | (2,978 | ) | ||
Foreign | 1,205 | 437 | 1,767 | ||||||||
222 | (168 | ) | (1,211 | ) | |||||||
Deferred: | |||||||||||
U.S. federal and state | 5 | (26 | ) | 40,055 | |||||||
Foreign | 7 | 102 | 1,007 | ||||||||
12 | 76 | 41,062 | |||||||||
Total provision for (benefit from) income taxes | $ | 234 | $ | (92 | ) | $ | 39,851 | ||||
The portion of the tax benefit derived from stock-based compensation that is allocated as common stock was $0.0 million in 2015, 2014 and 2013.
A reconciliation of the Company’s effective tax rate to the United States federal statutory income tax rate was as follows:
2015 | 2014 | 2013 | ||||||
U.S. federal statutory income tax rate | 35.0 | % | 35.0 | % | 35.0 | % | ||
State income taxes, net of federal benefit | (1.1 | ) | (0.6 | ) | 1.1 | |||
Tax credits | 4.2 | 3.0 | 11.3 | |||||
Domestic production and export tax incentives | — | — | 3.7 | |||||
Non-U.S. income taxed at different rates | 2.1 | 3.3 | 8.4 | |||||
Changes in unrecognized tax benefits | (2.4 | ) | 2.1 | 3.6 | ||||
Change in valuation allowance | (32.3 | ) | (38.0 | ) | (327.2 | ) | ||
Stock compensation | (4.2 | ) | (4.1 | ) | (3.6 | ) | ||
Other, net | (2.0 | ) | (0.5 | ) | (0.4 | ) | ||
(0.7 | )% | 0.2 | % | (268.1 | )% | |||
The Company currently benefits from a tax incentive program in Singapore pursuant to which the Company pays no Singapore income tax with respect to manufacturing income. The incentive commenced on July 1, 2006 and will continue through June 30, 2016 assuming the Company is able to satisfy applicable requirements. There is no assurance the Company will be able to satisfy these requirements and failure to meet such requirements may lead to reduction in future or past tax benefits. The Company has failed to meet certain of the associated requirements in the past, however has obtained a waiver for certain periods. The Company believes that it is more likely than not it will continue to receive the associated tax incentives and there is no indication that past benefits received would be rescinded.
The Company operates globally but considers its significant tax jurisdictions to include Canada, China, France, Japan, Korea, Singapore, Taiwan, the United Kingdom and the United States. As of March 28, 2015, the following tax years remained subject to examination by the major tax jurisdictions indicated:
62
Major Jurisdictions | Open Tax Years |
Canada | 2011 and forward |
China | 2005 and forward |
France | 2012 and forward |
Japan | 2008 and forward |
Korea | 2010 and forward |
Singapore | 2011 and forward |
Taiwan | 2010 and forward |
United Kingdom | 2011 and forward |
United States | 2004 and forward |
A US federal income tax audit for the 2011 and 2012 tax period concluded in the final quarter of 2014 and resulted in a tax refund of $0.5 million.
A reconciliation of the beginning and ending amount of the consolidated liability for unrecognized income tax benefits for the years ended March 28, 2015 and March 29, 2014 was as follows:
(In thousands) | 2015 | 2014 | |||||
Beginning unrecognized tax benefits balance | $ | 9,356 | $ | 9,210 | |||
Gross increases for tax positions of prior years | 849 | 44 | |||||
Gross decreases for tax positions of prior years | (1,013 | ) | — | ||||
Gross increases for tax positions for current year | 462 | 102 | |||||
Ending unrecognized tax benefits balance | $ | 9,654 | $ | 9,356 | |||
The unrecognized tax benefits were presented as long-term income taxes payable on the Consolidated Balance Sheets net of offsetting deferred tax assets. If recognized the net impact to the effective tax rate associated with the unrecognized tax benefits would be $0.2 million and $1.0 million as of March 28, 2015 and March 29, 2014, respectively. The company records interest and penalties related to unrecognized tax benefits as tax expense. The interest and penalties were minimal in 2015 and 2014. The Company expects no decrease in unrecognized tax benefits within the next twelve months from the lapse in statutes of limitation. The Company also expects the annual increases to be consistent with prior years and does not anticipate any significant changes in unrecognized tax benefits in the next twelve months as the result of examinations.
14. Accrued Liabilities
Accrued liabilities consisted of the following at March 28, 2015 and March 29, 2014:
(In thousands) | 2015 | 2014 | |||||
Payroll-related liabilities | $ | 6,723 | $ | 6,166 | |||
Product warranty accrual | 3,342 | 4,215 | |||||
Restructuring and cost management amounts payable | 1,997 | 1,050 | |||||
Pension benefit liabilities | 1,853 | 1,912 | |||||
Purchase order commitments and receipts | 1,815 | 2,569 | |||||
Professional fees payable | 1,237 | 1,933 | |||||
Customer deposits | 1,057 | 375 | |||||
Value added taxes payable | 474 | 332 | |||||
Freight accrual | 171 | 503 | |||||
Income taxes payable | 83 | 162 | |||||
Other | 1,485 | 1,307 | |||||
$ | 20,237 | $ | 20,524 | ||||
63
15. Product Warranty
The following is a reconciliation of the changes in the aggregate product warranty accrual for 2015, 2014 and 2013:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Product warranty accrual, beginning | $ | 4,215 | $ | 5,411 | $ | 4,187 | |||||
Warranty charges incurred, net | (6,468 | ) | (7,178 | ) | (7,381 | ) | |||||
Provision for warranty charges | 5,595 | 5,982 | 8,605 | ||||||||
Product warranty accrual, ending | $ | 3,342 | $ | 4,215 | $ | 5,411 | |||||
Net warranty charges incurred include labor charges and costs of replacement parts for system repairs under warranty. These costs are recorded net of any estimated cost recoveries resulting from either successful repair of damaged parts or from warranties offered by the Company’s suppliers for defective components. The provision for warranty charges reflects the estimate of future anticipated net warranty costs to be incurred for all products under warranty at fiscal year-end and is recorded to cost of sales.
16. Deferred Revenue
The following is a reconciliation of the changes in deferred revenue for 2015, 2014 and 2013:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Deferred revenue, beginning | $ | 10,515 | $ | 10,196 | $ | 10,751 | |||||
Revenue deferred | 46,139 | 34,594 | 54,535 | ||||||||
Revenue recognized | (44,278 | ) | (34,275 | ) | (55,090 | ) | |||||
Deferred revenue, ending | $ | 12,376 | $ | 10,515 | $ | 10,196 | |||||
17. Derivative Financial Instruments
The Company enters into derivative financial instruments on a limited basis and does not use them for trading purposes. It does, however, use derivatives to manage well-defined foreign currency risks. The Company hedges material non-functional currency monetary asset and liability balances. Foreign exchange contract gains and losses are recognized at the end of each fiscal period in the Company’s results of operations. Such gains and losses are typically offset by the corresponding changes to the related underlying hedged item. Cash flows from derivative financial instruments are classified in the same category as the cash flows from the items hedged.
At March 28, 2015 and March 29, 2014, the Company had net forward exchange contracts to purchase foreign currencies totaling $2.8 million and $8.9 million, respectively. In general, these contracts mature in less than six months and the counterparties are large, highly rated banks; therefore, the Company believes that the risk of loss as a result of nonperformance by the banks is minimal.
The table below summarizes, by currency, the notional amounts of forward exchange contracts in U.S. dollars as of March 28, 2015 and March 29, 2014. The “bought” amounts represent the net U.S. dollar equivalents of commitments to purchase foreign currencies, and the “sold” amounts represent the net U.S. dollar equivalents of commitments to sell foreign currencies. The foreign currency amounts have been translated into a U.S. dollar equivalent value using the exchange rates as of March 28, 2015 and March 29, 2014.
Bought (Sold) | |||||||
(In thousands) | 2015 | 2014 | |||||
Japanese Yen | $ | 4,263 | $ | 4,346 | |||
Euro | 10,354 | 13,322 | |||||
New Taiwan Dollar | (831 | ) | (440 | ) | |||
Korean Won | (3,000 | ) | (1,917 | ) | |||
British Pound | (2,906 | ) | (3,664 | ) | |||
Chinese Renminbi | (4,278 | ) | (1,917 | ) | |||
Singapore Dollar | (598 | ) | (716 | ) | |||
Canadian Dollar | (159 | ) | (136 | ) | |||
$ | 2,845 | $ | 8,878 | ||||
64
18. Commitments and Contingencies
The aggregate minimum commitment obligation under operating leases beyond March 28, 2015 was as follows (in thousands):
Year | Operating Leases | ||
2016 | $ | 2,647 | |
2017 | 1,849 | ||
2018 | 1,332 | ||
2019 | 897 | ||
2020 | 16 | ||
Thereafter | — | ||
$ | 6,741 | ||
The Company leases certain equipment, automobiles, manufacturing and office space under operating leases, which are non-cancelable and expire on various dates through fiscal 2020. Rental expense for all operating leases was $2.7 million, $2.8 million and $2.6 million in 2015, 2014 and 2013, respectively. The operating lease amount includes our contractual facility lease obligation at Chelmsford, Massachusetts plant, which will be closed in the fourth quarter of 2016 as a part of the Company’s plan to streamline its manufacturing and development activities. See Note 25 "Restructuring and Cost Management Plans" for further discussion on Chelmsford plant closure plan.
In the normal course of business, the Company agrees to indemnify customers with respect to certain matters. The Company has agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from other third party claims that the Company’s products, when used for their intended purposes, infringe the intellectual property rights of such other third parties. To date, the Company has not recorded any material charges related to these types of obligations.
19. Loan Agreement
On March 20, 2015, the Company entered into a loan and security agreement ("Loan Agreement") with Silicon Valley Bank ("SVB"), as lender. The Loan Agreement provides for a senior secured asset-based revolving credit facility (the “Credit Facility”) with up to $30 million available on a revolving basis, including a $15 million sublimit for letters of credit, until March 20, 2018. Borrowings under the Credit Facility may be used for working capital needs and other general corporate purposes. The Credit Facility has three levels of reporting, pricing, and availability based on the Company’s liquidity and certain borrowing base valuations of the Company’s eligible accounts receivable. Amounts outstanding under the Credit Facility will bear interest at a rate per annum equal to, at the election of the Company, the LIBOR rate or Wall Street Journal prime rate or, plus an additional interest rate margin that is determined by the availability of borrowings under the Loan Agreement. The additional interest rate margin will range from 2.0% to 2.75% in the case of LIBOR advances and from zero percent to 0.5% for prime rate advances. During an event of default, amounts due under the Loan Agreement will bear interest at a rate per annum equal to 5% above the rate otherwise applicable to such amounts. The Company paid SVB a commitment fee of $75,000 on execution of the Loan Agreement and will be required to pay $12,500 per annum thereafter, and is required to pay a quarterly unused facility fee equal to 0.30% - 0.50% per annum of the average daily unused portion of the commitments under the Credit Facility, depending upon availability of borrowings under the Credit Facility.
At March 28, 2015, the Company had no loans outstanding under the Loan Agreement.
20. Loss Per Share
The following was a reconciliation of weighted average shares outstanding used in the calculation of basic and diluted earnings per share for 2015, 2014 and 2013:
65
(In thousands, except per share data) | 2015 | 2014 | 2013 | ||||||||
Net loss | $ | (43,811 | ) | $ | (38,334 | ) | $ | (54,716 | ) | ||
Weighted average shares used for basic earnings per share | 30,611 | 29,974 | 29,357 | ||||||||
Incremental diluted shares | — | — | — | ||||||||
Weighted average shares used for diluted earnings per share | 30,611 | 29,974 | 29,357 | ||||||||
Net loss per share: | |||||||||||
Net loss—basic | $ | (1.43 | ) | $ | (1.28 | ) | $ | (1.86 | ) | ||
Net loss—diluted | $ | (1.43 | ) | $ | (1.28 | ) | $ | (1.86 | ) | ||
Awards of options, SARs and unvested restricted stock units representing an additional 2.9 million, 3.8 million and 3.4 million shares of stock for 2015, 2014 and 2013, respectively, were not included in the calculation of diluted net earnings per share because their effect would have been antidilutive.
21. Shareholders’ Equity
Share Repurchase Program
On December 9, 2011, the Board of Directors authorized a share repurchase program totaling $20.0 million to acquire shares of the Company’s outstanding common stock. The repurchases are to be made at management’s discretion in the open market or in privately negotiated transactions in compliance with applicable securities laws and other legal requirements and are subject to market conditions, share price and other factors.
The following table provides information with respect to share repurchases by the Company during 2015 and 2014.
Fiscal Year | Total number of shares purchased | Average price paid per share | Total value of shares repurchased (in millions) | Maximum value of shares that may yet be purchased under the program (in millions) |
2015 | 207,738 | $7.01 | $1.5 | $18.3 |
2014 | 19,832 | $9.65 | $0.2 | $19.8 |
In the first quarter of 2015 the Company repurchased 207,738 shares for $1.5 million in cash under this authorization at an average price of $7.01 per share, calculated inclusive of commissions and fees. The Company did not repurchase any shares during the subsequent quarters of 2015. In 2014 the Company repurchased 19,832 shares for $0.2 million at an average price of $9.65 per share.
The Company has repurchased a total of 227,570 shares to date under this authorization as a part of its publicly announced plan. Any cash used to settle repurchase transactions is reflected as a component of cash used in financing activities on the Consolidated Statements of Cash Flows. There is no fixed completion date for the repurchase program.
Dividends
In February 2015, the Board of Directors suspended the quarterly dividend which was adopted by the Company in December 2011. The Company paid dividends in the first three quarters of 2015 under the 2011 dividend policy. The following table summarizes the quarterly dividends declared and paid by us in 2015 and 2014:
Date Declared | Record Date | Payable Date | Amount per Share | |||
November 18, 2014 | December 1, 2014 | December 15, 2014 | $0.08 | |||
August 21, 2014 | September 2, 2014 | September 12, 2014 | $0.08 | |||
May 15, 2014 | May 27, 2014 | June 10, 2014 | $0.08 | |||
February 13, 2014 | February 27, 2014 | March 13, 2014 | $0.08 | |||
November 7, 2013 | November 19, 2013 | December 4, 2013 | $0.08 | |||
August 8, 2013 | August 19, 2013 | September 3, 2013 | $0.08 | |||
May 14, 2013 | June 5, 2013 | June 19, 2013 | $0.08 | |||
The Company paid aggregate dividends of $7.3 million and $9.6 million in 2015 and 2014, respectively.
66
22. Legal Proceedings
In the ordinary course of business, we are involved in various legal matters, either asserted or unasserted, and investigations. In the opinion of management, ultimate resolution of these matters will not have a material effect on our consolidated financial position, results of operations or cash flows.
23. Shareholder Rights Plan
The Company had a shareholder rights plan, under which each share of common stock carries with it an associated right (a “Right”). Each Right entitled the holder to purchase 1/100 of a share of Series A No Par Preferred Stock at a purchase price of $60, subject to adjustment. The Rights did not have voting or dividend rights and, until they became exercisable, had no dilutive effect on the Company’s earnings.
In March 2015, the Company entered into an amendment to the shareholders rights plan, pursuant to which the final expiration date was advanced from May 18, 2019 to March 26, 2015. As a result of the amendment, at March 28, 2015, there are no outstanding Rights and the shareholder rights plan had terminated.
24. Segment and Geographic Information
Operating segments are defined as components of an enterprise about which separate financial information is available that is evaluated regularly by the chief operating decision maker, or decision making group, in deciding how to allocate resources and in assessing performance. Our chief operating decision maker is our Chief Executive Officer. Prior to the fourth quarter of 2015, we operated in one segment, high-technology manufacturing equipment, which was comprised of products that were classified in three groups: interconnect and micromachining, semiconductor and component. As a result of changes in our go-to-market strategies, common customer characteristics, and information utilized to manage our business, we realigned our products into two segments. As of March 28, 2015 we operate in two segments, Component Processing and Micromachining. The Company is providing supplemental historical information of net sales and gross profit by operating segment for the years 2015, 2014 and 2013.
The following table presents net sales information by previously disclosed product groups and is included as a reference to transition from our prior reporting structure to our new operating segment structure:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Interconnect & Microfabrication Group (IMG) | $ | 101,433 | $ | 120,947 | $ | 170,360 | |||||
Semiconductor Group (SG) | 38,586 | 35,779 | 18,754 | ||||||||
Components Group (CG) | 19,099 | 24,441 | 27,511 | ||||||||
$ | 159,118 | $ | 181,167 | $ | 216,625 | ||||||
The following table presents net sales information by operating segments:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Component Processing | $ | 124,598 | $ | 141,401 | $ | 125,072 | |||||
Micromachining | 34,520 | 39,766 | 91,553 | ||||||||
$ | 159,118 | $ | 181,167 | $ | 216,625 | ||||||
The following table presents gross profit by operating segments:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Component Processing | $ | 50,970 | $ | 63,914 | $ | 49,435 | |||||
Micromachining | 6,383 | 12,175 | 37,922 | ||||||||
Corporate and other | (2,672 | ) | (16,218 | ) | (26,069 | ) | |||||
$ | 54,681 | $ | 59,871 | $ | 61,288 | ||||||
Segment disclosures are presented to the gross profit level as this is the primary performance measure for which the segment management are responsible. Corporate and other charges include amortization of acquired intangible assets, stock-based compensation, restructuring and other costs. Selling, service, general and administrative and other operating expenses are managed at the functional and corporate levels, and because allocation to the market segments would be arbitrary, have not been allocated to the market segments. See the consolidated statements of operations for reconciliations from gross profit to income before taxes. These reconciling items are not included in the measure of profit and loss for each reportable segment.
67
Net sales by geographic area, based on the location of the end user, were as follows:
(In thousands) | 2015 | 2014 | 2013 | ||||||||
Asia | $ | 124,049 | $ | 136,336 | $ | 186,346 | |||||
Americas | 18,067 | 31,596 | 20,907 | ||||||||
Europe | 17,002 | 13,235 | 9,372 | ||||||||
$ | 159,118 | $ | 181,167 | $ | 216,625 | ||||||
Assets, excluding goodwill are not allocated to segments for internal reporting presentations and are managed at corporate level. The total carrying value of $7.7 million of goodwill was allocated to the Topwin reporting unit as of March 28, 2015.
(In thousands) | 2015 | ||
Topwin | 7,717 | ||
$ | 7,717 | ||
Long-lived assets, exclusive of investments and net deferred tax assets, by geographic area were as follows:
(In thousands) | 2015 | 2014 | |||||
Americas | $ | 32,620 | $ | 38,930 | |||
Asia | 19,775 | 6,271 | |||||
Europe | 9,835 | 9,810 | |||||
$ | 62,230 | $ | 55,011 | ||||
25. Restructuring and Cost Management Plans
In March 2015, as a part of the plan to streamline its manufacturing and development activities, the Company initiated a restructuring plan to close the assembly plant and development center located in Chelmsford, Massachusetts. The estimated completion date of the plan is the end of fiscal 2016. As a result of this action, the Company recognized $3.0 million of restructuring costs in 2015 primarily related to $2.0 million of employee severance and related benefits charged against operating expenses and $1.0 million of inventory write-off charges associated with products that will not be transferred to other production sites of the Company. The inventory write-off charges were recorded to cost of sales. The corresponding liability was included in accrued liabilities on the Consolidated Balance Sheets.
In 2015, the Company made cash payments of $1.0 million consisting primarily of $0.6 million of contractual payments to our former Chief Executive Officer and a $0.4 million in employee severance and related payments for the Asia restructuring plan initiated in 2013. The 2013 restructuring plan was initiated to improve efficiency, transition from memory repair and other legacy products, and focus on laser microfabrication for consumer electronics, emerging technologies related to semiconductor 3D packaging, and proprietary laser technology. Additionally, this plan included consolidation of certain development and manufacturing activities in Asia to our Singapore facility. The plan was completed in 2015 and there are no unpaid restructuring costs associated with this plan in accrued liabilities balance at March 28, 2015.
The following table presents the amounts related to restructuring and cost management amounts payable (in thousands):
Restructuring costs payable balance as of March 30, 2013 | $ | 485 | |
Employee severance and related benefits: | |||
Cash payments | (204 | ) | |
Costs incurred and other adjustments | 769 | ||
Restructuring costs payable balance as of March 29, 2014 | 1,050 | ||
Employee severance and related benefits: | |||
Cash payments | (985 | ) | |
Costs incurred and other adjustments | 1,932 | ||
Restructuring costs payable balance as of March 28, 2015 | $ | 1,997 | |
68
26. Quarterly Financial Information (Unaudited)
(In thousands, except per share data) | 1st Quarter | 2nd Quarter | 3rd Quarter | 4th Quarter | |||||||||||
Year ended March 28, 2015 | |||||||||||||||
Net sales | |||||||||||||||
Systems | $ | 23,424 | $ | 30,273 | $ | 31,750 | $ | 26,156 | |||||||
Service | 11,606 | 12,583 | 11,911 | 11,415 | |||||||||||
Total net sales | 35,030 | 42,856 | 43,661 | 37,571 | |||||||||||
Cost of sales: | |||||||||||||||
Systems | 16,934 | 20,742 | 22,031 | 18,488 | |||||||||||
Service | 5,808 | 7,349 | 6,917 | 6,168 | |||||||||||
Total cost of sales | 22,742 | 28,091 | 28,948 | 24,656 | |||||||||||
Gross profit | 12,288 | 14,765 | 14,713 | 12,915 | |||||||||||
Net operating expenses | 21,298 | 20,323 | 20,716 | 24,197 | |||||||||||
(Benefit from) provision for income taxes | (713 | ) | 441 | 437 | 69 | ||||||||||
Net loss | (8,251 | ) | (6,243 | ) | (6,376 | ) | (22,941 | ) | |||||||
Basic net loss per share | (0.27 | ) | (0.20 | ) | (0.21 | ) | (0.75 | ) | |||||||
Diluted net loss income per share | (0.27 | ) | (0.20 | ) | (0.21 | ) | (0.75 | ) | |||||||
Dividends per outstanding common share | |||||||||||||||
Declared | $ | 0.08 | $ | 0.08 | $ | 0.08 | $ | — | |||||||
Paid | $ | 0.08 | $ | 0.08 | $ | 0.08 | $ | — | |||||||
Year ended March 29, 2014 | |||||||||||||||
Net sales | |||||||||||||||
Systems | $ | 38,050 | $ | 49,751 | $ | 27,704 | $ | 26,549 | |||||||
Service | 8,122 | 9,896 | 10,563 | 10,532 | |||||||||||
Total net sales | 46,172 | 59,647 | 38,267 | 37,081 | |||||||||||
Cost of sales: | |||||||||||||||
Systems | 22,625 | 31,398 | 17,249 | 29,598 | |||||||||||
Service | 5,088 | 4,667 | 5,817 | 4,854 | |||||||||||
Total cost of sales | 27,713 | 36,065 | 23,066 | 34,452 | |||||||||||
Gross profit | 18,459 | 23,582 | 15,201 | 2,629 | |||||||||||
Net operating expenses | 21,581 | 22,885 | 19,795 | 24,446 | |||||||||||
Provision for (benefit from) income taxes | 101 | (33 | ) | 141 | (301 | ) | |||||||||
Net loss | (3,283 | ) | (2,778 | ) | (4,640 | ) | (27,633 | ) | |||||||
Basic net loss per share | (0.11 | ) | (0.09 | ) | (0.15 | ) | (0.92 | ) | |||||||
Diluted net loss per share | (0.11 | ) | (0.09 | ) | (0.15 | ) | (0.92 | ) | |||||||
Dividends per outstanding common share | |||||||||||||||
Declared | $ | 0.08 | $ | 0.08 | $ | 0.08 | $ | 0.08 | |||||||
Paid | $ | 0.08 | $ | 0.08 | $ | 0.08 | $ | 0.08 | |||||||
The sum of the quarterly data presented in the table above for fiscal 2015 and 2014 may not equal annual results due to rounding.
1. | In the fourth quarter of 2015, gross profit included $1.0 million of charges for inventory write-offs related to the Chelmsford, Massachusetts restructuring plan. |
2. | In the fourth quarter of 2015, net operating expenses included a non-cash goodwill impairment charge of $7.9 million to write down the goodwill to its implied fair value as of March 28, 2015, a $2.0 million restructuring cost related to the Chelmsford, Massachusetts restructuring plan, primarily consisting of employee severance and related costs. |
3. | In each of the third and fourth quarters of 2015, net operating expenses included $0.3 million and $0.5 million of acquisition and integration charges related to Topwin. |
69
4. | In the fourth quarter of 2015, net non-operating expenses included a loss on a cost method investment of $4.3 million and a $0.6 million gain on liquidation of a foreign subsidiary. |
5. | In the fourth quarter of 2015, the Board of Directors voted to suspend the quarterly dividend. |
6. | In the fourth quarter of 2014, gross profit included $12.8 million of charges for inventory write-offs. |
7. | In the fourth quarter of 2014, gross profit included $1.1 million in restructuring costs, and $1.0 million in charges for asset write-offs. |
8. | In the fourth and second quarters of 2014, net non-operating expenses included an other-than-temporary impairment of a cost method investment of $6.1 million and $3.6 million, respectively. |
9. | In the third quarter of 2014, net operating expenses included a net gain on sale of property and equipment of $1.3 million. |
27. Subsequent Events
The Company has evaluated subsequent events from the statement of assets, liabilities and shareholders' equity date through the date at which the financial statements were available to be issued, and determined there are no other items to disclose.
Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure
None.
Item 9A. Controls and Procedures
Attached to this annual report as exhibits 31.1 and 31.2 are the certifications of our President and Chief Executive Officer (CEO) and our Chief Financial Officer (CFO) required by Section 302 of the Sarbanes-Oxley Act of 2002 (the Section 302 Certifications). This “Controls and Procedures” section of our annual report on Form 10-K is our disclosure of the conclusions of our management, including our CEO and our CFO, regarding the effectiveness of our disclosure controls and procedures as of the end of the period covered by this report based on management’s evaluation of those disclosure controls and procedures. This section of the Annual Report on Form 10-K should be read in conjunction with the Section 302 Certifications for a more complete understanding of the topics presented.
(a) Evaluation of Disclosure Controls and Procedures
We performed an evaluation of our disclosure controls and procedures in connection with preparation of this Annual Report on Form 10-K. This controls evaluation was performed under the supervision and with the participation of management, including our CEO and CFO. Disclosure controls are procedures that are designed to ensure that information required to be disclosed in our reports filed under the Securities Exchange Act of 1934 (the Exchange Act), such as this Annual Report on Form 10-K, is recorded, processed, summarized and reported within the time periods specified by the Securities and Exchange Commission (the SEC). Disclosure controls are also designed to ensure that such information is accumulated and communicated to our management, including the CEO and CFO, as appropriate to allow timely decisions regarding required disclosure.
Based on the evaluation, our CEO and CFO have concluded that our disclosure controls and procedures were not effective as of March 28, 2015, because of the material weaknesses described in Management’s Report on Internal Control over Financial Reporting below.
(b) Management’s Report on Internal Control Over Financial Reporting
Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rules 13a-15(f) and 15d-15(f). Under the supervision and with the participation of our management, including our CEO and CFO, we conducted an evaluation of the effectiveness of our internal control over financial reporting as of March 28, 2015 using the criteria established in Internal Control-Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Electro Scientific Industries, Inc. acquired Wuhan Topwin Optoelectronics Technology Co., Ltd. during 2015, and management excluded from its assessment of the effectiveness of Electro Scientific Industries, Inc.’s internal control over financial reporting as of March 28, 2015 Wuhan Topwin Optoelectronics Technology Co., Ltd.’s internal control over financial reporting associated with total assets of approximately $7.3 million and total liabilities of $3.0 million and total revenues of approximately $0.5 million included in the consolidated financial statements of Electro Scientific Industries, Inc. as of and for the year ended March 28, 2015.
A material weakness is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting such that there is a reasonable possibility that a material misstatement of a company’s annual or interim financial statements will not be prevented or detected on a timely basis.
Based on the evaluation performed, our management has concluded that our internal control over financial reporting was not effective as of March 28, 2015, because of the following material weaknesses in our internal control over financial reporting:
70
We did not effectively design our risk assessment process and certain review and process level controls over the accounting and disclosure of complex, judgmental accounting matters and non-routine transactions. Our risk assessment process and certain review and process level controls were not designed at an appropriate level of precision to identify and analyze changes in the business, ensure that the Company’s financial reporting was aligned with those changes, and to ensure sufficient technical accounting expertise was applied in the judgments related to significant, complex, and non-routine transactions.
The control deficiencies resulted in material misstatements in our preliminary consolidated financial statements for fiscal 2015 relating to events that occurred in our fourth quarter of fiscal 2015 affecting goodwill, disclosures related to the Topwin acquisition, disclosures related to operating segments, presentation of service revenue and associated cost of sales on the statements of operations.
These misstatements were corrected prior to the issuance of the annual consolidated financial statements. In addition, in some instances, no material misstatements were identified. The control deficiencies create a reasonable possibility that a material misstatement to the consolidated financial statements will not be prevented or detected on a timely basis, and therefore we concluded that the deficiencies represent material weaknesses in the Company’s internal control over financial reporting and our internal control over financial reporting was not effective as of March 28, 2015.
KPMG LLP, an independent registered public accounting firm, who audited the consolidated financial statements included in this annual report on Form 10-K, has audited the effectiveness of our internal control over financial reporting as of March 28, 2015, and has issued an adverse report which is included in (f) below.
(c) Limitations on Effectiveness of Controls
Our management, including our CEO and CFO, do not expect that our disclosure controls or our internal control over financial reporting will prevent all error and all fraud. A control system, no matter how well-conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of a simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
(d) Changes in Internal Control
Other than the material weaknesses noted in 9(b) above, there were no changes in the Company’s internal control over financial reporting that occurred during the quarter ended March 28, 2015 that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
(e) Remediation of Material Weaknesses in Internal Control Over Financial Reporting
The Company is in the process of identifying and implementing certain changes in our internal controls to address the material weaknesses. Specifically, the Company is documenting, implementing, and assessing necessary changes in the risk assessment process and in the design of the controls and identifying additional procedures and expertise required to ensure effective management and technical review of significant, complex, and non-routine transactions.
71
(f) Report of Independent Registered Public Accounting Firm
The Board of Directors and Shareholders
Electro Scientific Industries, Inc.:
We have audited Electro Scientific Industries, Inc.’s internal control over financial reporting as of March 28, 2015, based on criteria established in Internal Control—Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Electro Scientific Industries, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control Over Financial Reporting included in Item 9A(b). Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.
We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.
A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
A material weakness is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of the company’s annual or interim financial statements will not be prevented or detected on a timely basis. Material weaknesses related to the ineffective design of the risk assessment process and certain review and process level controls over the accounting and disclosure of complex, judgmental accounting matters and non-routine transactions have been identified and included in management’s assessment of internal control over financial reporting.
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Electro Scientific Industries, Inc. and subsidiaries as of March 28, 2015 and March 29, 2014, and the related consolidated statements of operations, comprehensive loss, shareholders’ equity, and cash flows for each of the years in the three-year period ended March 28, 2015. These material weaknesses were considered in determining the nature, timing, and extent of audit tests applied in our audit of the March 28, 2015 consolidated financial statements, and this report does not affect our report dated June 26, 2015, which expressed an unqualified opinion on those consolidated financial statements.
Electro Scientific Industries, Inc. acquired Wuhan Topwin Optoelectronics Technology Co., Ltd. during 2015, and management excluded from its assessment of the effectiveness of Electro Scientific Industries, Inc.’s internal control over financial reporting as of March 28, 2015 Wuhan Topwin Optoelectronics Technology Co., Ltd.’s internal control over financial reporting associated with total assets of approximately $7.3 million, total liabilities of $3.0 million and total revenues of approximately $0.5 million included in the consolidated financial statements of Electro Scientific Industries, Inc. as of and for the year ended March 28, 2015. Our audit of internal control over financial reporting of Electro Scientific Industries, Inc. also excluded an evaluation of the internal control over financial reporting of Wuhan Topwin Optoelectronics Technology Co., Ltd.
In our opinion, because of the effect of the aforementioned material weaknesses on the achievement of the objectives of the control criteria, Electro Scientific Industries, Inc. has not maintained effective internal control over financial reporting as of March 28, 2015, based on criteria established in Internal Control-Integrated Framework (1992) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).
72
/s/ KPMG LLP
Portland, Oregon
June 26, 2015
Item 9B. Other Information
None.
PART III
Item 10. Directors, Executive Officers and Corporate Governance
The information required by this item, including information about the Company’s audit committee, is included under the headings “Proposal 1: Election of Directors,” “Board Committees,” “Executive Officers” and “Section 16(a) Beneficial Ownership Reporting Compliance” in our Proxy Statement for our 2015 Annual Meeting of Shareholders and is incorporated herein by reference.
The Company has adopted the ESI Code of Conduct, a code of ethics and business practices with which every person who works for the Company is expected to comply. In addition, the Company has adopted a Code of Ethics for Financial Managers applicable to the chief executive officer, principal financial officer, principal accounting officer or controller and any other person performing similar functions on behalf of the Company. The ESI Code of Conduct and Code of Ethics for Financial Managers are publicly available on the Company’s website under “Corporate Governance” in the Investors Section (at http://investors.esi.com/governance.cfm). This website address is intended to be an inactive, textual reference only; none of the materials on this website are part of this report. If any waiver is granted, including any implicit waiver, from a provision of the Code of Ethics for Financial Managers, the Company will disclose the nature of such waiver on that website or in a report on Form 8-K.
Item 11. Executive Compensation
The information required by this item is included under the headings “Board Compensation,” “Executive Compensation,” “Potential Payments Upon Termination or Change in Control,” “Compensation Discussion and Analysis,” “Compensation Committee Report” and “Compensation Committee Interlocks and Insider Participation” in our Proxy Statement for our 2015 Annual Meeting of Shareholders and is incorporated herein by reference.
Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters
Certain information required by this item is included under the headings “Security Ownership of Certain Beneficial Owners and Management” and “Equity Compensation Plan Information” in our Proxy Statement for our 2015 Annual Meeting of Shareholders and is incorporated herein by reference.
Item 13. Certain Relationships and Related Transactions, and Director Independence
The information required by this item is included under “Certain Relationships and Related Transactions” and “Corporate Governance Guidelines and Independence” in our Proxy Statement for our 2015 Annual Meeting of Shareholders and is incorporated herein by reference.
Item 14. Principal Accounting Fees and Services
The information required by this item is included under “Principal Accounting Fees and Services” in our Proxy Statement for our 2015 Annual Meeting of Shareholders and is incorporated herein by reference.
73
PART IV
Item 15. Exhibits and Financial Statement Schedules
(a)(1) and (a)(2) Financial Statements and Schedules
The Consolidated Financial Statements, together with the reports thereon of our independent registered public accounting firm, are included on the pages indicated below:
Page | |
There are no schedules required to be filed herewith.
(a)(3) Exhibits
The following exhibits are filed herewith and this list is intended to constitute the exhibit index. An asterisk (*) beside the exhibit number indicates the exhibits containing a management contract, compensatory plan or arrangement, which are required to be identified in this report.
3.1 | Third Restated Articles of Incorporation, as amended. Incorporated by reference to Exhibit 3.1 of the Company's Annual Report on Form 10-K for the fiscal year ended April 3, 2010. | |
3.2 | 2009 Amended and Restated Bylaws, as amended. Incorporated by reference to Exhibit 3.1 of the Company’s Current Report on Form 8-K filed on March 26 2015. | |
10.1 | * | 2000 Stock Option Plan. Incorporated by reference to Exhibit 10-F of the Company’s Annual Report on Form 10-K for the fiscal year ended June 3, 2000. |
10.2 | * | 2000 Stock Option Incentive Plan. Incorporated by reference to Appendix A of the Company’s definitive Proxy Statement for its 2000 Annual Meeting of Shareholders. |
10.3 | * | Loan and Security Agreement, dated March 20, 2015, between the Company and Silicon Valley Bank. Incorporated by reference to Exhibit 10.1 of the Company’s Current Report on Form 8-k filed on March 23, 2015. |
10.4 | * | Form of Change in Control Agreement between the Company and Edward Grady. Incorporated by reference to Exhibit 10.1 to the Company’s Quarterly Report on Form 10-Q for the quarter ended December 27, 2014 (the “December 2014 10-Q”). |
10.5 | * | Form of Stock Settled Stock Appreciation Rights Agreement between the Company and Edward Grady (November 18, 2014 awards). Incorporated by reference to Exhibit 10.2 to the December 2014 10-Q. |
10.6 | * | Form of Performance-Based Restricted Stock Unit Award Agreement between the Company and Edward Grady (November 18, 2014). Incorporated by reference to Exhibit 10.3 to the December 2014 10-Q. |
10.7 | * | Form of Performance-Based Restricted Stock Unit Award Agreement between the Company and executives other than Edward Grady (November 18, 2014). Incorporated by reference to Exhibit 10.4 to the December 2014 10-Q. |
10.8 | Form of Performance-Based Restricted Stock Unit Agreement (May 2014 grants). Incorporated by reference to Exhibit 10 of the Company’s Quarterly Report on Form 10-Q for the quarter ended September 27, 2014 | |
10.9 | * | 2004 Stock Incentive Plan, as amended. Incorporated by reference to Exhibit 10.2 of the Company’s Current Report on Form 8-K filed on August 25, 2014. |
74
10.10 | * | Deferred Compensation Plan 2008 Restatement. Incorporated by reference to Exhibit 10.14 of the Company’s Annual Report on Form 10-K for the fiscal year ended March 29, 2008 (the “2008 10-K”). |
10.11 | * | Amendment No. 1 to Deferred Compensation Plan 2008 Restatement. Incorporated by reference to Exhibit 10.31 of the 2008 10-K. |
10.12 | * | Amendment No. 2 to Deferred Compensation Plan 2008 Restatement, dated February 16, 2012. Incorporated by reference to Exhibit 10.15 of the Company's Annual Report on Form 10-K for the fiscal year ended March 31, 2012 (the "2012 10-K"). |
10.13 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Option Terms and Conditions (Incentive Stock Options) (for awards made prior to July 20, 2005). Incorporated by reference to Exhibit 10.3 of the Company’s Current Report on Form 8-K filed on October 21, 2004 (the “October 21 8-K”). |
10.14 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Option Terms and Conditions (Non-Qualified Stock Options) (for awards made prior to July 20, 2005). Incorporated by reference to Exhibit 10.4 of the October 21 8-K. |
10.15 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Terms and Conditions (non-directors) (for awards made on July 20, 2005). Incorporated by reference to Exhibit 10.2 of the Company’s Current Report on Form 8-K filed July 26, 2005 (the “July 26 8-K”). |
10.16 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Terms and Conditions (directors) (for awards made on July 20, 2005). Incorporated by reference to Exhibit 10.3 of the July 26 8-K. |
10.17 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Option Terms and Conditions (Non-Qualified Stock Options granted to Non-Directors) (for awards made on May 24, 2006). Incorporated by reference to Exhibit 10.1 of the Company’s Current Report on Form 8-K filed on May 30, 2006 (the “May 30 8-K”). |
10.18 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Option Terms and Conditions (Non-Qualified Stock Options granted to Directors) (for awards made in May 2006). Incorporated by reference to Exhibit 10.2 of the May 30 8-K. |
10.19 | * | Form of Change in Control Agreement between the Company and each of Robert DeBakker and Paul Oldham. Incorporated by reference to Exhibit 10.1 of the Company’s Current Report on Form 8-K filed September 26, 2006. |
10.20 | * | Form of Restricted Stock Unit Agreement for directors. Incorporated by reference to Exhibit 10.4 of the Company's Current Report on Form 8-K filed July 25, 2006. |
10.21 | * | Form of Notice of Grant of Stock Options and Option Agreement and related Terms and Conditions (for awards made after February 2008). Incorporated by reference to Exhibit 10.27 of the 2008 10-K. |
10.22 | * | Form of Stock Appreciation Rights Agreement (for awards made prior to May 2010). Incorporated by reference to Exhibit 10.1 of the Company’s Quarterly Report on Form 10-Q for the fiscal quarter ended September 26, 2009. |
10.23 | * | Form of Indemnification Agreement for directors and certain officers. Incorporated by reference to Exhibit 10 of the Company’s Current Report on Form 8-K filed on February 17, 2010. |
10.24 | * | Form of Performance-Based Restricted Stock Units Award Agreement (for awards made on May 13, 2010). Incorporated by reference to Exhibit 10.32 of the Company's Annual Report on Form 10-K for the fiscal year ended April 22, 2011 (the "2011 10-K"). |
10.25 | * | Form of Restricted Stock Units Award Agreement (for awards made on May 13, 2010). Incorporated by reference to Exhibit 10.33 of the 2011 10-K. |
10.26 | * | Form of Stock Appreciation Rights Agreement (for awards made on May 13, 2010). Incorporated by reference to Exhibit 10.34 of the 2011 10-K. |
10.27 | * | Form of Restricted Stock Units Award Agreement (for awards made on or after May 12, 2011). Incorporated by reference to Exhibit 10.40 of the 2012 10-K. |
10.28 | * | Form of Performance-Based Restricted Stock Units Award Agreements (for awards made on or after August 8, 2012 and prior to May 2014). |
10.29 | Voting Agreement, dated as of December 8, 2008, among Electro Scientific Industries, Inc. and The D3 Family Fund, L.P., The D3 Family Bulldog Fund, L.P., The D3 Family Canadian Fund, L.P., The DIII Offshore Fund, L.P., Nierenberg Investment Management Company, Inc., Nierenberg Investment Management Offshore, Inc. and David Nierenberg. Incorporated by reference to Exhibit 10 of the Company’s Current Report on form 8-K filed December 9, 2008. | |
75
10.30 | * | Offer Letter, dated February 23, 2014, between Electro Scientific Industries, Inc. and Edward C. Grady. Incorporated by reference to Exhibit 10 of the Company’s Current Report on form 8-K filed February 27, 2014. |
21 | Subsidiaries of the Company | |
23 | Consent of Independent Registered Public Accounting Firm | |
24.1 | Power of Attorney for Frederick Ball | |
24.2 | Power of Attorney for Richard J. Faubert | |
24.3 | Power of Attorney for Edward C. Grady | |
24.4 | Power of Attorney for Barry L. Harmon | |
24.5 | Power of Attorney for David Nierenberg | |
24.6 | Power of Attorney for Jon D. Tompkins | |
24.7 | Power of Attorney for Robert R. Walker | |
24.8 | Power of Attorney for Richard H. Wills | |
31.1 | Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002. | |
31.2 | Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002. | |
32.1 | Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. | |
32.2 | Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002. | |
101.INS | XBRL Instance Document * | |
101.SCH | XBRL Taxonomy Extension Schema Document * | |
101.CAL | XBRL Taxonomy Extension Calculation Linkbase Document * | |
101.DEF | XBRL Taxonomy Extension Definition Linkbase Document * | |
101.LAB | XBRL Taxonomy Extension Label Linkbase Document * | |
101.PRE | XBRL Taxonomy Extension Presentation Linkbase Document * | |
* Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities and Exchange Act of 1934, and otherwise are not subject to liability under those sections.
76
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
Date: | June 26, 2015 | ELECTRO SCIENTIFIC INDUSTRIES, INC. | |
By: | /s/ Edward C. Grady | ||
Edward C. Grady | |||
President and Chief Executive Officer | |||
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities indicated on June 26, 2015.
Signature | Title | |
/s/ Edward C. Grady | President, Chief Executive Officer and Director (Principal Executive Officer) | |
Edward C. Grady | ||
/s/ PAUL OLDHAM | Vice President of Administration, Chief Financial Officer and Corporate Secretary (Principal Financial Officer) | |
Paul Oldham | ||
/s/ KERRY MUSTOE | Vice President, Corporate Controller, and Chief Accounting Officer (Principal Accounting Officer) | |
Kerry Mustoe | ||
*FREDERICK A. BALL | Director | |
Frederick Ball | ||
*RICHARD J. FAUBERT | Director | |
Richard J. Faubert | ||
*BARRY L. HARMON | Director | |
Barry L. Harmon | ||
*DAVID NIERENBERG | Director | |
David Nierenberg | ||
*JON D. TOMPKINS | Vice Chairman of the Board | |
Jon D. Tompkins | ||
*ROBERT R. WALKER | Director | |
Robert R. Walker | ||
*Richard H. Wills | Chairman of the Board | |
Richard H. Wills | ||
* By: | /s/ PAUL OLDHAM | ||
Paul Oldham, Attorney-in-fact | |||
77