U. S. SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

x

QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended June 30, 2014

 

¨

TRANSITION REPORT under SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from ___________ to _____________

 

Commission File Number: 333-184669

 

CORRUVEN, INC.

 

Nevada				01-0949620
(State or other jurisdiction				(IRS Employer
of Incorporation)				Identification Number)

 

Alain Belanger, Chief Executive Officer

Corruven, Inc.

264 Notre Dame

Kedgwick, New Brunswick E8B 1H9

Canada

Phone: (877) 284-3101

Fax: (506) 284-3153

(Name, address and telephone number of agent for service)

 

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No ¨

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a small reporting company.

 

Large accelerated filer ¨	Accelerated filer                        ¨
Non-accelerated filer   ¨	Smaller reporting company      x

 

Indicate by a check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act. Yes ¨ No x

 

APPLICABLE ONLY TO ISSUERS INVOLVED IN BANKRUPTCY

PROCEEDINGS DURING THE PRECEDING FIVE YEARS

 

Check whether the registrant filed all documents and reports required to be filed by Section 12, 13, or 15(d) of the Exchange Act of 1934 after the distribution of securities under a plan confirmed by a court. Yes ¨ No ¨

 

APPLICABLE ONLY TO CORPORATE ISSUERS

 

State the number of shares outstanding of each of the issuer’s classes of common equity, as of the latest practicable date:

 

21,926,111 common shares outstanding, $0.001 par value, as of August 19, 2014.

 

 

Forward Looking Statements

 

Certain information contained in this Quarterly Report on Form 10-Q (this “Report” or “Quarterly Report”) includes forward-looking statements expressed in good faith and based upon what we believe are reasonable assumptions, but there can be no assurance that these expectations will be achieved or accomplished.  These forward looking statements can be identified by the use of terms and phrases such as “believe,” “plan,” “intend,” “anticipate,” “target,” “estimate,” “expect,” and the like, and/or future-tense or conditional constructions (“will,” “may,” “could,” “should,” etc.).

 

The statements herein which are not historical reflect our current expectations and projections about the Company’s future results, performance, liquidity, financial condition, prospects and opportunities and are based upon information currently available to the Company and management and their interpretation of what are believed to be significant factors affecting the businesses, including many assumptions regarding future events.

 

Readers are urged not to place undue reliance on these forward-looking statements, which speak only as of the date of this Report.  We assume no obligation to update any forward-looking statements in order to reflect any event or circumstance that may arise after the filing date of this Quarterly Report, other than as may be required by applicable law or regulation.  Readers are urged to carefully review and consider the various disclosures made by us in our reports filed with the SEC (which shall also include by reference herein and incorporate the same as if fully included in their entirety, all Form 10-Ks, Form 10-Qs, Form 8-Ks and other periodic reports filed by us in the SEC’s EDGAR filing system (www.sec.gov)) which attempt to update interested parties of the risks and factors and other disclosures that may affect our business, financial condition, results of operation and cash flows.

 

Our actual results could differ materially from those anticipated in these forward-looking statements as a result of various factors, including those set forth in this Quarterly Report.

 

  

PART I

 

ITEM 1.         FINANCIAL STATEMENTS

  

CORRUVEN, INC.

BALANCE SHEETS

              

		June 30,				December 31,
		2014				2013
		(Unaudited)
ASSETS
Current assets
Cash and cash equivalents		$	22,335			$	669,688
Amounts due from related parties			15,849				7,924
Accounts receivable			5,300				-
HST Receivable			11,879				4,708
Deposits			4,684				4,675
Total current assets			60,047				686,995
Buildings, net of accumulated depreciation of $18,026 and $10,313, respectively			258,880				266,069
Land			16,775				16,743
TOTAL ASSETS		$	335,702			$	969,807
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities
Accounts payable and accrued expenses		$	37,501			$	28,573
Accounts payable - related party			12,778				82,531
Current portion, note payable			70,253				-
Total current liabilities			120,532				111,104
Note payable, net of current portion and discount of $9,994 and $13,493, respectively			60,258				126,453
TOTAL LIABILITIES			180,790				237,557
Commitments and contingencies
STOCKHOLDERS' EQUITY
Series A preferred stock, $0.001 par value, 5,000,000 shares authorized,
100,000 shares issued and outstanding
at June 30, 2014 and December 31, 2013, respectively			100				100
Common stock, $0.001 par value, 95,000,000 shares authorized,
21,926,111 and 21,926,111 shares issued and outstanding
at June 30, 2014 and December 31, 2013, respectively			21,926				21,926
Additional paid-in capital			2,509,492				2,509,492
Accumulated other comprehensive income			(42,897	)			(44,271	)
Accumulated deficit			(2,333,709	)			(1,754,997	)
TOTAL STOCKHOLDERS' EQUITY			154,912				732,250
TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY		$	335,702			$	969,807

  

The accompanying notes are an integral part of these unaudited condensed financial statements

 

 

CORRUVEN, INC.

UNAUDITED STATEMENTS OF OPERATIONS

 

		For The				For The				For the				For the
		Three Months Ended				Three Months Ended				Six Months Ended				Six Months Ended
		June 30				June 30				June 30,				June 30,
		2014				2013				2014				2013
Revenues:
Product revenues		$	6,807			$	-			$	6,807			$	-
Product revenues - related party			6,218								6,218				-
Cost of goods sold - related party			(11,071	)			-				(11,071	)			-
Gross profit			1,954				-				1,954				-
Operating Expenses
Selling, general and administrative			83,707				40,753			$	590,975			$	277,076
Loss from operations			(81,753	)			(40,753	)			(589,021	)			(277,076	)
Other income (expense)
Interest expense			(1,903	)			(1,114	)			(3,738	)			(1,114	)
Freight income			291				-				291				-
Rental income - related party			6,256				5,000				13,756				5,000
Total other income net			4,644				3,886				10,309				3,886
Income before taxes			(77,109	)			(36,867	)			(578,712	)			(273,190	)
Income tax			-				-				-				-
Net loss		$	(77,109	)		$	(36,867	)		$	(578,712	)		$	(273,190	)
Other Comprehensive Income
Gain(loss) on foreign currency translation			8,478				(3,099	)			1,374				(6,695	)
Net other comprehensive loss		$	(68,631	)		$	(39,966	)			(577,338	)			(279,885	)
Net loss per common share, basic and diluted		$	(0.00	)		$	(0.00	)		$	(0.03	)		$	(0.01	)
Weighted average common shares outstanding,
basic and diluted			21,926,111				20,558,139				21,926,111				20,406,365

 

The accompanying notes are an integral part of these unaudited condensed financial statements

 

 

CORRUVEN, INC.

STATEMENTS OF CASH FLOWS

 

		For the Six				For the Six
		Months Ended				Months Ended
		June 30,				June 30,
		2014				2013
CASH FLOWS FROM OPERATING ACTIVITIES
Net loss		$	(578,712	)		$	(273,190	)
Adjustments to reconcile net loss to net cash used in operating activities:
Stock-based compensation			-
Depreciation			7,533				3,042
Accretion of debt discount			3,738				1,114
Changes in assets and liabilities:
Other receivable - related parties			(7,925	)			-
Accounts receivable			(5,300	)			-
Other receivable			(7,171	)			83,015
Prepaid expenses			-				(7,560	)
Deposits			-				297
Accounts payable			8,863				49,350
Accounts payable - related parties			(69,753	)			-
NET CASH USED IN OPERATING ACTIVITIES			(648,727	)			(143,932	)
CASH FLOWS FROM INVESTING ACTIVITIES
Cash paid for purchase of building and land			-				(184,097	)
NET CASH USED IN INVESTING ACTIVITIES			-				(184,097	)
CASH FLOWS FROM FINANCING ACTIVITIES
Proceeds from sale of common stock			-				362,032
NET CASH PROVIDED BY FINANCING ACTIVITIES			-				362,032
Effect of exchange rate changes on cash			1,374				(6,695	)
NET CHANGE IN CASH			(647,353	)			27,308
CASH, beginning of period			669,688				56,216
CASH, end of period		$	22,335			$	83,524
NON-CASH INVESTING AND FINANCING ACTIVITIES
Interest paid		$	-			$	-
Income taxes paid		$	-			$	-
Building purchase payable due in exchange for building		$	-			$	123,072
Shares issued for stock subscription		$	-			$	75,325

 

The accompanying notes are an integral part of these unaudited condensed financial statements

 

 

CORRUVEN, INC.

NOTES TO CONDENSED FINANCIAL STATEMENTS

JUNE 30, 2014 AND 2013

 

1.

NATURE OF OPERATIONS AND SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

 

Corruven, Inc., a Nevada corporation (“Corruven,” “Company,” “we,” “us,” or “our”) is a company that develops and markets a lightweight composite panel, Corruven, fabricated mainly from rotary veneer providing numerous advantages for various applications in different construction sectors.

 

The Company was originally incorporated on January 4, 2010.

 

Basis of Presentation

 

The Company has prepared the accompanying unaudited condensed financial statements in accordance with accounting principles generally accepted in the United States of America (“GAAP”) for interim financial information and with the instructions to Form 10-Q and Article 8 of Regulation S-X. Accordingly, they do not include all of the information and footnotes required by GAAP for complete financial statements. In the opinion of management, all adjustments (consisting of only normal recurring accruals) considered necessary for a fair presentation have been included. Operating results for the six months ended June 30, 2014 are not necessarily indicative of the results that may be expected for the year ending December 31, 2014. For further information, refer to the Company’s audited financial statements and footnotes thereto included in the Company’s Annual Report on Form 10-K for the year ended December 31, 2013.

 

Use of Estimates

 

Our accounting and reporting policies conform with GAAP. In preparing the condensed financial statements, we are required to make estimates and assumptions that impact the amounts reported in the condensed financial statements and accompanying notes. Actual results could materially differ from those estimates.

 

Principles of Consolidation

 

We have no wholly owned subsidiaries.

 

Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash and cash equivalents and trade accounts receivable. The Company maintains its cash balances in bank accounts that, at times, may exceed federally insured limits. The Company has not experienced any losses in such accounts.  Management believes that the Company is not exposed to any significant credit risk on cash.

 

Property, Plant and Equipment

 

Property, plant and equipment is stated at cost, less accumulated depreciation, and we depreciate it on a straight-line basis over the estimated useful lives of the assets. Additions and improvements (including interest costs for construction of qualifying long-lived assets) are capitalized. Maintenance and repair expenses are charged to expense as incurred. The cost of property and equipment sold or disposed of and the related accumulated depreciation are eliminated from the property and related accumulated depreciation accounts, and any gain or loss is credited or charged to other income (expense).

 

We generally provide for depreciation over the following estimated useful service lives. Additionally, if there are indicators that certain assets may be potentially impaired we will analyze such assets in accordance with the related GAAP standard.

 

	Years
Equipment	5
Buildings	18

 

  

The following table summarizes the activity related to our property, plant and equipment:

 

		At June 30,
		2014				2013
Buildings			276,906				289,461
Land			16,775				17,601
Accumulated Depreciation			(18,026	)			(2,935	)
		$	275,655				304,127

 

Depreciation expense for the three and six months ended June 30, 2014 was $3,808 and $7,533, respectively and $3,042 for the three and six months ended June 30, 2013.

 

Revenue Recognition

 

For revenue from product sales, the Company recognizes revenue using four basic criteria that must be met before revenue can be recognized: (1) persuasive evidence of an arrangement exists; (2) delivery has occurred; (3) the selling price is fixed and determinable; and (4) collectability is reasonably assured. Determination of criteria (3) and (4) are based on management’s judgment regarding the fixed nature of the selling prices of the products delivered and the collectability of those amounts. Provisions for discounts and rebates to customers, estimated returns and allowances, and other adjustments are provided for in the same period the related sales are recorded. The Company defers any revenue for which the product has not been delivered or is subject to refund until such time that the Company and the customer jointly determine that the product has been delivered or no refund will be required.

 

Cash and Cash Equivalents

 

Cash and cash equivalents include certificates of deposit and all highly liquid debt instruments with maturities of three months or less when purchased.

 

HST Receivables

 

HST receivables consist of amounts paid by the Company to sales taxes authorities for initial payments of products and services made to Corruven Canada. Initial payments include a tax amount for all payments made, regardless of the nature of the expense. On a quarterly basis, the Company requests refunds from the tax authority for overpayments of sales taxes made which are related to non-taxable items. Amounts paid on non-taxable items are then refunded to the Company by the tax authority. At June 30, 2014 and December 31, 2013 these amounts were $11,879 and $4,708, respectively.

 

Foreign Currency Translation

 

The Company’s functional currency is the Canadian dollar. The Company uses the United States dollar for financial reporting purposes.  Assets and liabilities of foreign operations are translated using current rates of exchange prevailing at the balance sheet date. Equity accounts have been translated at their historical exchange rates when the capital transaction occurred.  Statement of operations amounts are translated at average rates in effect for the reporting period. The foreign currency translation adjustment gain (loss) of $1,374 and $(6,695) for six months ended June 30, 2014 and 2013, respectively, have been reported as a component of comprehensive loss in the statement of stockholders’ equity. Translation gains or losses are shown as a separate component of stockholders’ equity.

 

Fair Value

 

The Company adopted the Financial Accounting Standards Board (the “FASB”) standard related to fair value measurement at inception. The standard defines fair value, establishes a framework for measuring fair value and expands disclosure of fair value measurements. The standard applies under other accounting pronouncements that require or permit fair value measurements and, accordingly, does not require any new fair value measurements. The standard clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. As a basis for considering such assumptions, the standard established a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value as follows.

 

  

Level 1. Observable inputs such as quoted prices in active markets;

 

Level 2. Inputs, other than quoted prices in active markets, that are observable either directly or indirectly; and

 

Level 3. Unobservable inputs in which there is little or no market data, which require the reporting entity to develop its own assumptions.

 

The Company had no assets or liabilities valued at fair value on a recurring or non-recurring basis as of June 30, 2014 and December 31, 2013.

 

Stock-Based Compensation

 

The FASB requires that all stock-based compensation be recognized as an expense in the condensed financial statements and that such cost be measured at the fair value of the award. We recognize compensation cost on a straight-line basis over the requisite service period for each separately vesting portion of the award.

 

Basic and Diluted Loss per Common Share

 

Basic net loss per common share is computed by dividing net loss attributable to common stockholders for the period by the weighted average number of common shares outstanding during the period.  Diluted net loss per share is computed by dividing the net loss attributable to common stockholders for the period by the weighted average number of common and common equivalent shares, such as stock options and warrants outstanding during the period.

 

Basic and diluted net loss applicable to common stock per share is computed using the weighted average number of common shares outstanding during the period. Common stock equivalents (prior to application of the treasury stock or, “if converted” method) from warrants were 2,939,624 and 1,759,629 at June 30, 2014 and 2013, respectively, and are excluded from the calculation of diluted net loss per share for all periods presented because the effect is anti-dilutive.

 

The following table shows the computation of basic and diluted earnings per common share for:

 

		For The				For The				For the				For the
		Three Months Ended				Three Months Ended				Six Months Ended				Six Months Ended
		June 30, 2014				June 30, 2013				June 30, 2014				June 30, 2013
Numerator – net loss			(77,109	)			(36,867	)			(578,712	)			(273,190	)
Denominator – weighted average
number of shares outstanding, basic and diluted			21,926,111				20,558,139				21,926,111				20,406,365
Loss per share, basic and diluted		$	(0.00	)		$	(0.00	)		$	(0.03	)		$	(0.01	)

 

Recently Adopted Accounting Pronouncements

 

In July 2013, the FASB issued Accounting Standards Update (“ASU”) No. 2013-11, “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists.” ASU 2013-11 provides explicit guidance on the financial statement presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists. The guidance is effective prospectively for fiscal years, and interim periods within those years, beginning after December 15, 2013, with an option for early adoption. This pronouncement is effective for reporting periods beginning on or after January 1, 2013. The adoption of ASU 2011-11 did not have a material impact on the Company’s condensed financial statements.

 

 

In June 2014, the FASB issued ASU No. 2014-10, “Elimination of Certain Financial Reporting Requirements, Including an Amendment to Variable Interest Entities”. The amendments in this update remove the definition of a development stage entity from ASC Topic 915, Development Stage Entities, thereby removing the distinction between development stage entities and other reporting entities from GAAP. In addition, the amendments eliminate the requirements for development stage entities to (1) present inception-to-date information on the statements of operations, cash flows, and stockholder’s equity, (2) label the financial statements as those of a development stage entity, (3) disclose a description of the development stage activities in which the entity is engaged, and (4) disclose in the first year in which the entity is no longer a development stage entity that in prior years it had been in the development stage. These amendments are effective for annual reporting periods beginning after December 15, 2014, with early application of the amendments permitted. The Company has elected early adoption of this standard. As such the Company no longer presents or discloses any information previously required under ASC Topic 915.

 

2. GOING CONCERN

 

As shown in the accompanying condensed financial statements, the Company has minimal revenues and incurred net losses from operations resulting $578,712 during the six months ended June 30, 2014. The Company has an accumulated deficit of $2,333,709. The Company has working capital deficit of $60,488 and $575,891 as of June 30, 2014 and December 31, 2013, respectively. These factors raise substantial doubt about the Company’s ability to continue as a going concern. Management is actively pursuing new ventures to increase revenues. In addition, the Company is currently seeking additional sources of capital to fund short term operations. The Company, however, is dependent upon its ability to secure equity and/or debt financing and there are no assurances that the Company will be successful, therefore, without sufficient financing it would be unlikely for the Company to continue as a going concern.

 

The condensed financial statements do not include any adjustments that might result from the outcome of any uncertainty as to the Company’s ability to continue as a going concern. The condensed financial statements also do not include any adjustments relating to the recoverability and classification of recorded asset amounts, or amounts and classifications of liabilities that might be necessary should the Company be unable to continue as a going concern.

 

3. INCOME TAXES

 

We utilize the asset and liability approach to measuring deferred tax assets and liabilities based on temporary differences existing at each balance sheet date using currently enacted tax rates in accordance with the FASB guidance on accounting for income taxes. Deferred tax assets are reduced by a valuation allowance when we believe it is more likely than not that some portion or all of the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.

 

Net deferred tax assets consist of the following components:

 

		For The Six Months Ended June 30,
		2014				2013
Current portion of deferred tax assets:
Benefit from carryforward of net operating loss		$	801,154			$	529,029
Less: Valuation allowance			(801,154	)			(529,029	)
Net deferred income tax asset		$	-			$	-

 

The Company has no uncertain tax positions.

 

At June 30, 2014, for federal income tax and alternative minimum tax reporting purposes, the Company has approximately $2,300,000 of unused net operating losses available for carry forward to future years. The benefit from carry forward of such net operating losses will expire between 2031 and 2032. Such benefit could be subject to further limitations if significant future ownership changes occur in the Company. The Company believes that a significant portion of its unused net operating loss carry forwards may never be utilized due to the fact that the Company has not generated any earnings to date.

 

  

4. NOTES PAYABLE

 

Notes payable consisted of the following at:

 

		June 30,				December 31,
		2014				2013
Building purchase payable		$	140,505			$	139,946
Less: discount on note			(9,994	)			(13,493	)
Less: current portion			(70,253	)			-
Long-term portion		$	60,258			$	126,456

 

The Company recorded an interest expense of $1,903 and $3,738 for the three and six months ended June 30, 2014, and $1,114 for the three and six months ended June 30, 2013, related to the amortization of the debt discount. The remaining balance due under the building purchase payable ($150,000 CAD) is due as follows, $75,000 CAD due on March 29, 2015 and $75,000 CAD is due on March 29, 2016.

 

5. EQUITY

 

We are authorized by our Certificate of Incorporation to issue 95,000,000 shares of Common Stock, $0.001 par value, of which shares of Common Stock were outstanding 21,926,111 at June 30, 2014 and at December 31, 2013.

 

We are authorized by our Certificate of Incorporation to issue 5,000,000 shares of preferred stock, $0.001 par value, of which 100,000 shares of Series A Preferred Stock were outstanding at June 30, 2014 and December 31, 2013. The Series A Preferred Stock have voting rights to vote as a single class upon any matter submitted to the stockholders. The Series A shareholder shall have such number of votes as is determined by multiplying: (a) the number of shares of Series A Preferred Stock held by such shareholder; (b) the sum of the number of issued and outstanding shares of Series A Preferred Stock, any other series of preferred and Common Stock on a fully diluted basis; and (c) 0.000006. The Series A Preferred Stock has no conversion, dividend, or liquidation rights.

 

No dividends were paid during the six months ended June 30, 2014 and 2013.

 

Share-Based Awards

 

The Company has not issued any share-based awards to date.

 

Equity Incentive Plan

 

The Company has not adopted an equity incentive plan.

 

Stock Options

 

The Company has not issued any stock options to date.

 

Warrants

 

The following table summarizes the continuity of the Company’s share purchase warrants:

 

		Number of Shares Subject to Warrants Outstanding				Weighted Avg. Exercise Price				Weighted Avg. Remaining Contractual Life
Warrant Balance at December 31, 2013			2,939,624			$	0.97				2.66
Granted			-				-				-
Exercised			-				-				-
Expired			-				-				-
Warrants outstanding and exercisable - June 30, 2014			2,939,624			$	0.97				2.66

  

 

6. COMMITMENTS AND CONTINGENCIES

 

Legal Proceedings

 

We have not been involved in any legal actions in the normal course of business. There is currently no active or threatened litigation in process.

 

Operating Leases

 

The Company has not entered into any leases at June 30, 2014, and December 31, 2013.

 

Employment Contracts

 

We currently do not have employment contracts with our senior executives.

 

Other

 

We may be subject to various other types of claims and disputes arising in the ordinary course of our business. While the resolution of such issues is not presently determinable, we believe that the ultimate resolution of such matters will not have a significant effect on our financial condition, results of operations and cash flows.

 

7. RELATED PARTY TRANSACTIONS

 

R&D and License Agreements – Corruven Canada, Inc.

 

On January 5, 2010, the Company entered into an Intellectual Property License Agreement with Corruven Canada, Inc. (the “License”). The License provided the Company an exclusive license for various patents and patent applications related to materials, methods and devices relating to Corruven wood panel. The License provides that the Company shall pay to Corruven Canada, Inc. an annual royalty license fee of one percent (1%) of net sales of the products sold by the Company pursuant to the License. In addition, as further described elsewhere in this Registration Statement in the section titled “Business of the Company” – “Intellectual Property”, the Company entered into a Research and Development Agreement (the “R&D Agreement”) with Corruven Canada, Inc. in which the Company agreed to expend certain funds for the right of using the technologies and patents developed by Corruven Canada, Inc. Corruven Canada, Inc. is considered a related party due to the ownership by Alain Belanger, the Company's CEO and majority shareholder. The R&D Agreement provided that Corruven Canada was required to perform all research and development related to the finalization and commercial application of the Corruven Composite Panel, for which the Company was required to pay certain research and development costs to Corruven Canada consisting of: (i) a total of $1,928,820 over a five year period as follows: $495,982 on or before January 5, 2012; $440,873 on or before January 5, 2013; $385,764 on or before January 5, 2014; $330,655 on or before January 5, 2015;and (ii) $275,546 on or before January 5 of each following year thereafter for the life of the R&D Agreement. On June 30, 2014, the Company and Corruven Canada amended and restated the R&D Agreement wherein the above scheduled research and development cost payment schedule was terminated and the parties agreed that the Company would provide such research and development costs to Corruven Canada on an “as needed” basis when requested by Corruven Canada. In addition the Company is required to pay to Corruven Canada a “development fee” of two percent (2%) of net sales proceeds of the Company after January 5, 2013.

 

The R&D Agreement can be terminated by either party at any time upon the receipt of 90 days written notice to the other party. Upon notification of termination, Corruven Canada Inc. shall proceed in an orderly fashion to limit or terminate any outstanding commitments and/or to conclude any research being developed as a result of the R&D Agreement.

 

The following represents payments the Company has made to Corruven Canada through June 30, 2014:

 

		Amount Paid
2010		$	150,000
2011			463,738
2012			647,653
2013			312,945
through June 30, 2014			546,177
Total		$	2,120,513

 

  

The amounts paid in 2010 of $150,000 were applied to the accrual of and balance due at January 5, 2013. There were no amounts (including those accrued) due under this agreement at June 30, 2014 and $72,866 due at December 31, 2013.

 

Cost of Goods Sold- Corruven Canada, Inc.

 

The Company is a sales and research company with exclusive commercialization rights over the Corruven® technology. The Company does not maintain inventory on hand. The Company currently purchases finished panels and/or core from Corruven Canada, Inc. and resells it without holding the inventory. Currently, all manufacturing operations and inventory are done and held by Corruven Canada Inc. The Company made purchases related to products sold totaling $11,071 during the six months ended June 30, 2014.

 

Lease Agreement – Corruven Canada, Inc.

 

Effective May 1, 2013, the Company entered into a lease agreement with Corruven Canada, Inc., a related party, wherein the Company leased a portion of industrial space at the Property to Corruven Canada, Inc. The lease agreement terminates on May 1, 2015, and Corruven Canada, Inc. is required to pay $30,000 per year in base rent to the Company. Rental income related to this lease agreement is classified as other income on the accompanying unaudited statement of operations. The Company is due $15,849 under this agreement at June 30, 2014.

 

Product sales - Groupe Regenord, Inc.

 

During the three and six months ended June 30, 2014 the Company recorded revenues related to the sale of products to Groupe Regenord, Inc. totaling $6,218. Groupe Regenord, Inc. made payments to the Company totaling $6,218 during the three and six months ended June 30, 2014 and no amounts were due from Groupe Regenord, Inc. at June 30, 2014. Groupe Regenord, Inc. is majority owned by Alain Belanger, the Company's CEO and majority shareholder.

 

8. SUBSEQUENT EVENTS

 

The Company has performed an evaluation of events occurring subsequent to the period end through the issuance date of this Quarterly report. Based on our evaluation, there are no other events that need to be disclosed.

 

  

ITEM 2.

MANAGEMENT’S DISCUSSION AND ANALYSIS OR PLAN OF OPERATIONS

 

FORWARD-LOOKING STATEMENTS

 

This discussion and analysis in this Quarterly Report on Form 10-Q should be read in conjunction with the accompanying Consolidated Financial Statements and related notes. Our discussion and analysis of our financial condition and results of operations are based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities, disclosure of any contingent liabilities at the financial statement date and reported amounts of revenue and expenses during the reporting period. We review our estimates and assumptions on an on-going basis. Our estimates are based on our historical experience and other assumptions that we believe to be reasonable under the circumstances. Actual results are likely to differ from those estimates under different assumptions or conditions, but we do not believe such differences will materially affect our financial position or results of operations. Our critical accounting policies, the policies we believe are most important to the presentation of our financial statements and require the most difficult, subjective and complex judgments, are outlined below in ‘‘Critical Accounting Policies,’’ and have not changed significantly.

 

In addition, certain statements made in this report may constitute forward-looking statements. These forward-looking statements involve known or unknown risks, uncertainties and other factors that may cause the actual results, performance, or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Specifically, but not limited to, 1) our ability to obtain necessary regulatory approvals for our products; and 2) our ability to increase revenues and operating income, is dependent upon our ability to develop and sell our products, general economic conditions, and other factors. You can identify forward-looking statements by terminology such as "may," "will," "should," "expects," "intends," "plans," "anticipates," "believes," "estimates," "predicts," "potential," "continues" or the negative of these terms or other comparable terminology. We base these forward-looking statements on our expectations and projections about future events, which we derive from the information currently available to us. Such forward-looking statements relate to future events or our future performance. Although we believe that the expectations reflected-in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance or achievements. Forward-looking statements are only predictions. The forward-looking events discussed in this Quarterly Report, the documents to which we refer you, and other statements made from time to time by us or our representatives, may not occur, and actual events and results may differ materially and are subject to risks, uncertainties, and assumptions about us. For these statements, we claim the protection of the “bespeaks caution” doctrine. The forward-looking statements speak only as of the date hereof, and we expressly disclaim any obligation to publicly release the results of any revisions to these forward-looking statements to reflect events or circumstances after the date of this filing.

 

OVERVIEW AND PLAN OF OPERATION

 

Corruven, Inc. (the “Company”) is a Nevada company that intends to develop and market a lightweight composite panel, the Corruven® composite panel (the “Corruven Composite Panel”). The Company currently generates minimal revenues and maintains uncertain viability. The Company’s head executive offices are located at 264 Notre Dame, Kedgwick, New Brunswick E8B 1H9 Canada. The Company’s phone number is (877) 284-3101 and fax number is (506) 284-3153. We maintain a website at www.corruven.com, however, the information in, or that can be accessed through, our web site, is not part of this report.

 

Overview

 

Corruven, Inc. is a company that intends to develop and market a lightweight composite panel, the Corruven® composite panel (the “Corruven Composite Panel”), which we believe, when fully developed, will provide numerous advantages over conventional panels when used in applications including building materials, furniture components, transportation and in other potential industries and applications. As currently designed, the Corruven Composite Panels: (i) contain approximately 75% air making them extremely lightweight compared to other conventional panels; (ii) utilize approximately 25% of the raw material required to produce traditional panels (e.g.: FRP, Fiber Cement, MDF, HDF, OSB, plywood, etc.); and (iii) use environmentally friendly formaldehyde-free glues which increase our distinction in the “green product” market.

 

  

All of the intellectual property rights, including trademark rights and patent rights (collectively the “Corruven IP”), underlying the Corruven Composite Panel are owned by Corruven Canada, Inc. (“Corruven Canada”), a Canadian corporation of which the majority of the shares are owned and/or controlled by certain principal shareholders and directors of the Company. The patent applications are entitled "(Elastic) Waved Wood Assembly and Method of Making Same". The International Patent Application was filed on November 27, 2009 claiming a priority of November 28, 2008, and has since entered a national phase in Canada, the United States, Brazil, Chile, China, the European Patent Office, Israel, India and South Korea. The applications are currently pending in each of the aforementioned countries, except in Canada, where the patent has already issued. The Corruven® trademark is registered in Canada and in the United States. There can be no assurance any additional patents will be granted or, even if they are, that we will have the resources to enforce these patents through litigation or otherwise. In addition, patents granted by the Canadian Patent Office do not guarantee that competitors in overseas locations will not imitate our products, or patent similar products in other nations.

 

On July 5, 2010, the Company entered into an exclusive world-wide license agreement (the "License Agreement") with Corruven Canada. The License Agreement granted the Company an exclusive world-wide license to manufacture, market, and sell the Corruven Composite Panels and to utilize any products, methods, structures, assemblies and devices which exist or may in the future be derived from, or utilize, the Corruven IP. The License Agreement also provides the Company with the right to sub-license the Corruven IP and will remain in force and effect until the expiration date of the patents.

 

Coincidentally with the granting of the License Agreement, the Company and Corruven Canada originally entered into a Research and Development Agreement (the “R&D Agreement”). The R&D Agreement provided that Corruven Canada was required to perform all research and development related to the finalization and commercial application of the Corruven Composite Panel, for which the Company was required to pay certain research and development costs to Corruven Canada consisting of: (i) a total of $1,928,820 over a five year period as follows: $495,982 on or before January 5, 2012; $440,873 on or before January 5, 2013; $385,764 on or before January 5, 2014; $330,655 on or before January 5, 2015;and (ii) $275,546 on or before January 5 of each following year thereafter for the life of the R&D Agreement. On or about June 30, 2014, the Company and Corruven Canada amended and restated the R&D Agreement (the “Restated R&D Agreement”) wherein the above scheduled research and development cost payment schedule was terminated and the parties agreed that the Company would provide such research and development costs to Corruven Canada on an “as needed” basis when requested by Corruven Canada. In addition the Company is required to pay to Corruven Canada a “development fee” of two percent (2%) of net sales proceeds of the Company after January 5, 2013. Title to the equipment and related machinery developed under the Restated R&D Agreement will be owned by Corruven Canada.

 

The following description of the License Agreement and Restated R&D Agreement is a summary only, and is qualified in its entirety by the actual Restated R&D Agreement and License Agreement (and amendments thereto). A copy of the License Agreement has been attached to our Registration Statement filed with the SEC on June 10, 2013 and is hereby incorporated in its entirety by reference. A copy of the Restated R&D Agreement has been attached to this Form 10-Q and is hereby incorporated in its entirety by reference.

 

We are a business that has recognized little revenue since our formation and there can be no assurance that the marketplace will generate any significant revenues in the future. Further, there can be no assurance that even if significant revenues are generated, that those revenues will be sufficient to enable the Company to maintain its operations. The Company believes it will need to secure additional financing in the future to continue to develop the product, attract customers, and start generating revenues. There can be no assurance that the Company will be able to raise additional capital.

 

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. The Auditor's Report included in our audited financial statements for the years ending December 31, 2013 and December 31, 2012 included language raising doubt about our ability to continue as a going concern. Our business plans estimate that we will need to raise additional capital to continue to fund our operations and there can be no assurance that we will be able to raise any or all of the capital required. We have only generated minimal revenues since our inception and have an accumulated deficit of $2,333,709 at June 30, 2014. Unless we begin generating significant revenues in the near future, we anticipate that we will continue to incur net losses in the near term, and we may never be able to achieve profitability. We expect to continue to incur losses for the foreseeable future. In order to achieve profitable operations we need to generate significant revenues. We cannot be certain that our business strategies will be successful or that will we generate significant revenues and become profitable. As such, we believe we will need to obtain additional public or private equity financings or debt financings in order to continue operations.

 

  

The Product

 

 

The Corruven Composite Panels are created as an engineered structure composed at a basic level of a corrugated veneer core, proprietary glue, a special paper and two veneer faces. The production concept requires heat pressing paper backed veneer sheets in a corrugated shaped press which creates the core of the lightweight panels. The outer face veneer sheets are then glued to the corrugated core material and structural outer edges of the panel are then installed. The Corruven Composite Panels can be customized with various materials found in industry to address specific customer requirements in terms of structure (wood species, plastics, steel, etc.) and faces (aluminum, HDF, laminates, paperboard, etc.). In addition to the composite panel technology protected by the Corruven IP, the proprietary materials and the entire production process and assembly line is a proprietary process that we believe none of our competitors maintain the knowledge or experience to replicate.

 

Traditional Wood Panels

 

Over the years, a few techniques have been used to “flex” veneer, all of which have remained tied to a low production environment and rudimentary production equipment due to a very limited niche market. Briefly, 2-ply veneer is usually described as being wood-on-wood or paperbacked. However, through the years, the term has also been used for a product with 3 layers; 2 sheets of veneer that are bonded to each face of a paper backing. The flexing or tenderizing process (mechanical, no chemicals required) begins thereafter, conferring great flexibility to the veneer sheets in the direction of the wood grain.

 

Since the 1970’s, flexible veneer has been used exclusively in woodworker projects for decorative purposes (custom designs for furniture, architectural finishes, etc.). During the 1990’s, usage of 2-ply veneer was initiated in commercial packaging (wine bottles, etc.) but remains a low volume market. To this day, these applications remain the main commercial and industrial uses of 2-ply veneer.

 

With regards to Particleboard, Fiberboard, Flake board and such, these products were developed to use fiber waste generated from sawmill processes and provide a relatively low cost panel for non-structural applications (contrary to plywood and OSB). Although they remain interesting products for various purposes, their weight, glue and formaldehyde content and poor track record in humid conditions leave several sectors of manufacturing looking for alternative solutions.

 

Corruven Composite Panels; The New Generation of Paneling

 

We believe the Corruven Composite Panels provide numerous advantages over the traditional type wood panels and boards for applications in a multitude of sectors focused mainly within the building materials, furniture and transportation sectors. One of its interesting particularities is that our panels contain approximately 75% air, which makes them extremely lightweight compared to other conventional panel (e.g. FRP, Fiber Cement, MDF, HDF, OSB, Plywood, etc.). We do not intend to replace products traditional products in all applications, but rather in those applications which generate the most value for the end user (i.e. weight reduction in the construction and transportation sectors).

 

Furthermore, we believe the Corruven Composite Panel is one of the “greenest” panels on the market today by reducing the need for and therefore preserving approximately 75% of the raw materials necessary for competing panels (thus reducing our production line capital costs as well) and allowing for final assembly closer to market and therefore substantially reducing the CO2 emissions associated with transportation.

 

This is contrary to large traditional panel manufacturers which require a very large infrastructure in one place to maximize plant output due to high capital costs related to production line equipment. We believe our production model will allow us to significantly reduce transportation costs, giving us and our clients a sharp advantage on our competitors when it comes to delivering product to market. 

 

 

Market for the Product

 

The Corruven Composite Panel is oriented towards a multitude of markets where a combination of lightweight and relative strength is required, such as furniture components, watercraft/boat components, industrial packaging and Recreational Vehicles. Furthermore, with an edged panel, the insulation factor becomes appealing for ceiling overhead panels as well as acoustic applications (speaker enclosures, sound barriers). We believe our products provide advantages over traditional wood panels including:

 

-

Opportunity to considerably reduce shipping costs due to the products light weight and potential to conduct final assembly closer to end user/market;

-

The Corruven Composite Panel, with its light weight, low production costs and overall green appeal can help manufacturers gain a competitive edge by reducing their respective product weight without retooling their production line and, as an added bonus, reap the advantages of using an “eco-friendly” product.

-

The fact that the Corruven Composite Panel manufacturing process and machinery requires significantly less capital investment than other traditional panel production lines, we can consider assembling the panels as close as possible to end user/market, thus considerably reducing final product transportation costs.

-

With the ability to use various grades of veneer as panel faces, it will be to our advantage to attract premium markets by adding exotic/high quality veneer faces, thus considerably increasing the potential return on investment and product notoriety.

 

Initial Commercial Applications

 

Large scale users of traditional wood panels, in mostly non-structural applications, are usually furniture manufacturers and cabinet makers. The shipping and handling costs of their products, due to increasing crude oil prices and overall cost increases therewith, are forcing these sectors to reconsider the design of their products and further manage the weight of said products, especially in connection with shipping expense.

 

Because of the interest expressed in the furniture manufacturing sector for light weight panels, it is our intent to allocate a large portion of our startup production to this market. However, the overall focus for Corruven Composite Panel will be to penetrate markets attracting premium pricing for added value products, such as natural wood finished ceiling tiles, luxury jet interior design, marine/yacht cabinetry & design and other lower volume / higher margin sectors. Other sectors like marine and aviation require light weight panels offering a high quality finish to maintain the luxury niche while reducing the overall weight of their products.

 

The following market analysis covers the four (4) key market segments we initially plan to penetrate.

 

1. Furniture

 

We believe that furniture and cabinet manufacturers are actively seeking lightweight panels for their products. One of the furniture industry’s major concerns is not being able to ship their products via standard shipping (UPS, FedEx, etc.) because of the weight of their products and the added costs that are attributable to weight. We believe that furniture and cabinets manufactured using our light weight panels would reduce these shipping weight costs and allow for more use of the standard shipping options.

 

2. Marine, Recreational Vehicles and Aviation

 

We believe this market represents an opportunity for our light weight Corruven Composite Panel. The Market already utilizes lightweight panels and we believe our panels present a viable alternative. We will manufacture our Corruven Composite Panels following strict industry guidelines regarding requirements of product stability and moisture resistance. We expect we may have to use a more moisture resistant core product to comply with industry standards. Several products are available, including the utilization of Teak wood sheets to produce the panels to increase marine appeal and humidity tolerance.

 

  

3. Shelves and Shelving Units

 

The current materials utilized for shelves and shelving units are mostly particleboard and MDF. These products are unnecessarily very heavy and oversized. The large quantity of material (and weight) is not necessary to support the products’ own structure. The Corruven Composite Panel, when utilized in this application, would make a much lighter product that is both easier to handle and less costly to ship.

 

4. Ceiling Tiles

 

This is a niche market. We believe this segment would be willing to pay a premium price for our product as it offers all of the key product characteristics with reduced weight and shipping costs.

 

Competition

 

When we become operational and commence offering our Corruven Composite Panels, we will face strong competition from competitors in all of the countries and regions in which we intend to operate.  In the case of our products, we face competition from foreign competitors in other regions of the world. In the future we may face increased competition in other countries in which we intend to operate from domestic or foreign competitors, most of which have greater financial resources than we do. In addition, we may face increased competition as a result of existing competitors increasing their production capacity. An increase in competition in the wood market or other value added wood products markets could adversely affect both our potential share of those markets and the price at which we are able to sell our products.

 

A multitude of wood and composite panels are offered on the market today. All of them are conceived and marketed to respond to a market need. Most of these businesses are relying on large volumes to generate revenue (requiring great quantities of raw material) to earn income, as their gross margins are small. The summary below and product specific comments give an overview and non-inclusive summary of the competition that the Company believes it faces.

 

Honeycomb

 

The most popular type of light weight panel is the “honeycomb” type which is a cardboard (or other materials such as aluminum or fiberglass) core, whose configuration resembles “honeycomb”, sandwiched between other substrates serving as faces (Veneer, HDF, Hardboard, Aluminum, Stainless steel, rubber, vinyl). The honeycomb core material is stretched or preformed into a hexagonal structure to which is bonded facing skins to form the sandwich panel. The bonding process for Honeycomb Panels is carried out in a heated hydraulically controlled press to ensure uniformity of each panel. The panel remains in the press during the adhesive curing process. The cost of producing honeycomb structures is high and requires sophisticated and expensive equipment and when adding the use of higher cost materials such as aluminum or fiberglass for the production of the honeycomb structure, the sheer cost of such panels is prohibitive for many sectors.

 

The advantage of honeycomb structures is the light weight it confers to a panel. However, honeycomb core panels require costly adapted hardware/anchoring systems, costly fabrication processes and sophisticated equipment.

 

World-wide distribution is limited to a few large-large scale manufacturers including:

 

-

Egger, an Austrian company producing a product line called EuroLight;

-

CCV (Canadian Commercial Vehicles) Corporation produces composite panels, mostly for the automotive industry;

-

Cascades, a North American Company, has a product line called Enviropac oriented towards the packaging industry; and

-

Bellcomb Technologies, a North American Company based in Minnesota, offers a variety of composite panel solutions with honeycomb structures.

 

Particleboard

 

The particleboard panel is a product generally utilized for interior applications. It is an engineered wood product manufactured from wood particles, such as wood chips, sawmill shavings, or even saw dust, and a synthetic resin or other suitable binder, which is pressed and extruded. Particleboard is a type of fiberboard, a composite material, but it is made up of larger pieces of wood than medium-density fiberboard and hardboard.

 

  

Particleboard is cheaper, denser and more uniform than conventional wood and plywood and is substituted when appearance and strength are less important than cost. However, particleboard can be made more attractive by painting or the use of wood veneers that are glued onto surfaces that will be visible. Though it is denser than conventional wood, it is the lightest and weakest type of fiberboard, except for insulation board. Medium-density fiberboard and hardboard, also called high-density fiberboard, are stronger and denser than particleboard.

 

A major disadvantage of particleboard is that it is very prone to expansion and discoloration due to moisture, particularly when it is not covered with paint or another sealer. Accordingly, it is rarely used outdoors or places that have high levels of moisture

 

Medium Density Fiberboard (MDF)

 

Medium-density fiberboard (MDF or MDFB) is an engineered wood product formed by breaking down softwood into wood fibers, often in a defibrator, combining it with resin, and forming panels by applying high temperature and pressure. It is a building material similar in application to plywood but made up of separated fibers, not wood veneers. It is denser than normal particleboard.

 

Benefits of MDF:

 

-

Some varieties are less expensive than many natural woods;

-

Isotropic (no grain), so no tendency to split;

-

Consistent in strength and size;

-

Flexible. Can be used for curved walls or surfaces; and

-

Shapes well with a router.

 

Drawbacks of MDF:

 

-

Heavier (due to the resins weights);

-

Swells and breaks when waterlogged;

-

Warps or expands if not sealed;

-

Contains urea-formaldehyde which may cause eye and lung irritation when cutting and sanding;

-

Dulls blades more quickly than many woods; and

-

Subject to significant shrinkage in low humidity environments

 

High Density Fiberboard (HDF or Hardboard)

 

Similar to MDF panels, the HDF or Hardboard is produced under increased pressure and temperature conditions. With its higher density Hardboard, also called high-density fiberboard, is a type of fiberboard, which is an engineered wood product. It is similar to particleboard and medium-density fiberboard, but is denser and much stronger and harder because it is made out of exploded wood fibers that have been highly compressed. It differs from particleboard in that the bonding of the wood fibers requires no additional materials, although resin is often added. Unlike particleboard, it has significant structural strength and will not split or crack. It is used in construction and furniture.

 

Plywood

 

Plywood is a type of engineered wood made from thin sheets of wood veneer called plies or veneers. The layers are glued together, each with its grain at right angles to adjacent layers for greater strength. There are usually an odd number of plies, as the symmetry makes the board less prone to warping, and the grain on the outside surfaces runs in the same direction. The plies are bonded under heat and pressure with strong adhesives, usually phenol formaldehyde resin, making plywood a type of composite material. Plywood is sometimes called the original engineered wood. The plies are usually 3mm in thickness.

 

A common reason for using plywood instead of plain wood is its resistance to cracking, shrinkage, twisting/warping, and its general high degree of strength. It has replaced many dimensional lumbers on construction applications for these reasons.

 

  

Raw Materials

 

Production startup will require a steady supply of low grade veneer and composite sheets to produce the Corruven Composite Panel cores as well as other composite substrates required as per potential client’s request for face finishes. Such supply can be provided from local producers as well as overseas suppliers. The overseas market for veneer and composite sheets is both a cost efficient and reliable source of raw material. The raw material cost is significant for those overseas operators but their manufacturing is stronger and sees greater value than we do domestically.

 

The required grade of veneer and composite to produce the Corruven Composite Panel corrugated cores is considered of low value and in abundance in present market conditions, without any projected changes in the near future. Therefore, this underutilized resource use benefits everyone: the sellers get income for an often unwanted product and the Company obtains its raw material at reduced costs. Cosmetic defects do not affect the quality of our final product as these layers reside within the panel. The difference, once again, is that visual defects (knots, stains, discoloration) do not affect the Corruven Composite Panel, thus reducing raw material cost.

 

Marketing

 

We anticipate that our future marketing activities may include all or some of the below activities:

 

-

Press releases and nurturing relationships with industry thought leaders to gain third-party validation and generate positive coverage for the Company;

-

Participation in industry events and trade shows, etc. to create customer awareness, trust and enthusiasm;

-

Search engine marketing and search engine optimization;

-

Web site development and design to create a pleasant and productive user-experience, engage and educate prospects and generate interest through information and demonstration, case studies, and marketing collateral;

-

Marketing campaigns to capture leads, promote the brand, conduct surveys and communicate information about our products;

-

Use of customer testimonials and case studies;

-

Promotions, partnerships and sponsorships as appropriate;

-

Advertising in industry related websites, blogs, e-newsletters and publications; and

-

Industry contacts and relationships.

 

Customer Service and Support

 

We anticipate that following the commercial launch of our Corruven Composite Panel, basic customer support during business hours will be available to Corruven customers.

 

Environmental and Other Regulatory Matters

 

Our proposed operations may be subject to extensive U.S., Canadian and other international federal, state and local environmental laws and regulations relating to, among other things, the generation, storage, handling, emission, transportation and discharge of regulated materials into the environment. Permits may be required for certain of our operations, and these permits may be subject to revocation, modification and renewal by issuing authorities. Governmental authorities may have the power to enforce compliance with their regulations, and violations may result in the payment of fines or the entry of injunctions, or both. We may also incur liability for investigation and clean-up of soil or groundwater contamination on or emanating from our proposed facilities at which regulated materials are located where we are identified as a responsible party. We do not believe we will be required under existing environmental laws and enforcement policies to expend amounts that will have a material adverse effect on our results of operations, financial condition or cash flows. The requirements of such laws and enforcement policies, however, have generally become more stringent over time. Also discovery of unknown conditions could require responses that could result in significant costs. Accordingly, we are unable to predict the ultimate cost of compliance with environmental laws and enforcement policies.

 

  

Intellectual Property

 

All of the Corruven IP underlying the Corruven Composite Panel are owned by Corruven Canada, Inc. The patent applications are entitled "(Elastic) Waved Wood Assembly and Method of Making Same". The International Patent Application was filed on November 27, 2009 claiming a priority of November 28, 2008, and has since entered a national phase in Canada, the United States, Brazil, Chile, China, the European Patent Office, Israel, India and South Korea. The applications are currently pending in each of the aforementioned countries, except in Canada, where the patent has already issued. The Corruven® trademark is registered in Canada and in the United States. There can be no assurance any additional patents will be granted or, even if they are, that we will have the resources to enforce these patents through litigation or otherwise. In addition, patents granted by the Canadian Patent Office do not guarantee that competitors in overseas locations will not imitate our products, or patent similar products in other nations.

 

On July 5, 2010, the Company entered into an exclusive world-wide License Agreement with Corruven Canada, a Canadian corporation of which the majority of the shares are owned and/or controlled by certain principal shareholders and directors of the Company. The License Agreement granted the Company an exclusive world-wide license to manufacture, market, and sell the Corruven Composite Panels and to utilize any products, methods, structures, assemblies and devices which exist or may in the future be derived from, or utilize, the Corruven IP. The License Agreement also provides the Company with the right to sub-license the Corruven IP and will remain in force and effect until the expiration date of the patents.

 

Coincidentally with the granting of the License Agreement, the Company and Corruven Canada originally entered into a Research and Development Agreement (the “R&D Agreement”). The R&D Agreement provided that Corruven Canada was required to perform all research and development related to the finalization and commercial application of the Corruven Composite Panel, for which the Company was required to pay certain research and development costs to Corruven Canada consisting of: (i) a total of $1,928,820 over a five year period as follows: $495,982 on or before January 5, 2012; $440,873 on or before January 5, 2013; $385,764 on or before January 5, 2014; $330,655 on or before January 5, 2015;and (ii) $275,546 on or before January 5 of each following year thereafter for the life of the R&D Agreement. On or about June 30, 2014, the Company and Corruven Canada amended and restated the R&D Agreement (the “Restated R&D Agreement”) wherein the above scheduled research and development cost payment schedule was terminated and the parties agreed that the Company would provide such research and development costs to Corruven Canada on an “as needed” basis when requested by Corruven Canada. In addition the Company is required to pay to Corruven Canada a “development fee” of two percent (2%) of net sales proceeds of the Company after January 5, 2013. Title to the equipment and related machinery developed under the Restated R&D Agreement will be owned by Corruven Canada.

 

The following description of the License Agreement and Restated R&D Agreement is a summary only, and is qualified in its entirety by the actual Restated R&D Agreement and License Agreement (and amendments thereto). A copy of the License Agreement has been attached to our Registration Statement filed with the SEC on June 10, 2013 and is hereby incorporated in its entirety by reference. A copy of the Restated R&D Agreement has been attached to this Form 10-Q and is hereby incorporated in its entirety by reference.

 

Employees

 

We currently have three employees consisting of our management team of Alain Belanger, Daniel Beauregard-Long and Conrad Belanger. At the present time, none of our employees receive a salary from the Company. All other work that is not handled by our management is outsourced to qualified professionals and consultants as deemed necessary. We intend to hire employees and independent contract labor on an as needed basis.  Following the completion of our Line of Production (defined below), we intend to maintain a highly competitive team of experienced and technically proficient employees and consultants and motivate them through a positive work environment and stock ownership. We believe that employee ownership, which may be encouraged through a stock option plan, is helpful for attracting, retaining and motivating qualified personnel. While we have not yet adopted a stock option plan, however, we may do so in the future.

 

Property

 

Our head offices are located at the offices of our Chief Executive Officer, Alain Belanger, for which we currently pay no rent.

 

Our manufacturing and research & development facilities are located at 355 Chemin du Pouvoir, Edmundston, New Brunswick, Canada (the “355 Chemin Property”). As further described in the notes to the financial statements, the 355 Chemin Property was purchased on April 29, 2013 and the total purchase price of the 355 Chemin Property was $300,000 CAD. The Company made an initial deposit related to the Purchase Agreement on March 26, 2013, totaling $25,000 CAD, and $125,000 CAD was paid on April 29, 2013. The remaining balance due ($150,000 CAD) is due as follows, $75,000 CAD due on March 29, 2015 and $75,000 due on March 29, 2016.

 

  

Our U.S. executive offices are located at the offices of our attorney, The Bingham Law Group, APC, for which we currently pay no rent.

 

Company Business Model and Proposed Revenue Generation

 

As of the date of this filing, through the Restated R&D Agreement with Corruven Canada, the Company is currently in the process of developing and completing the pilot technology and machinery involved in the line of production and production processes needed to produce the Corruven Composite Panel (the “Line of Production”). The Company has two initial proposed business models designed to generate future revenues through: (i) sales of the Corruven Composite Panel as an end user product; and (ii) the Line of Production license model.

 

Sales of Corruven Products

 

Our initial business model focuses on the generation of revenues through the sale of the Corruven Composite Panel product line itself. Following the completion of the pilot Line of Production, we intend to generate revenues through the development of sales contracts relating to the purchase by manufacturers of the Corruven Composite Panel product line. Once our pilot Line of Production and initial production facilities are complete, we plan to begin production initially for this target market.

 

Line of Production License Model

 

Our long term business model focuses on the potential for licensing our Line of Production and necessary raw materials related to the production of the Corruven Composite Panel. We hope to be less dependent on the manufacturing sector’s fluctuations by potentially focusing on the business of licensing the Line of Production equipment in different sectors while generating revenue from: (i) the sale and license of equipment and related technology; (ii) ongoing royalties from the output of such licensed equipment; and (iii) the raw materials used in the Line of Production and end product to be provided to the licensee by the Company. This allows for a business model that we believe does not depend on the local or regional health of the economy to generate balanced revenues. We expect that the Line of Production clients will develop new applications for the products on a case-by-case basis and thus increase its reach in the market place. Each Line of Production license and the related equipment and technology will be tailored to the individual licensee’s needs.

 

As described above, our initial revenue generating business model relates to the sale of Corruven Composite Panel products. Following the completion of the pilot Line of Production, we intend to launch the line of Corruven Composite Panel products and generate potential revenues through the development of sales contracts relating to the purchase by manufacturers of our line of Corruven Composite Panel products. Once our pilot Line of Production is complete, we plan to begin production initially for this target market.

 

RESULTS OF OPERATIONS

 

Revenues

 

We recognized revenues of $13,025 for the three and six months ended June 30, 2014 and $0 for the same periods in the prior year. These revenues were related to the sale of finished panels and core.

 

Cost of Goods Sold

 

We recognized cost of goods sold of $11,071 for the three and six months ended June 30, 2014 and $0 for the same periods in the prior year.

 

Operating Expenses

 

Our operating expenses consisted primarily of R&D fees incurred in the development of the Corruven technology associated with our Restated R&D Agreement with Corruven Canada, Inc. Additionally, general and administrative expenses consisting primarily of marketing, professional fees, travel, and other miscellaneous corporate costs are included in these amounts.

 

  

The tables below provide information regarding selling, general and administrative expenses:

  

		The three months ended June 30,												The six months ended June 30,
		2014				2013				Variance				2014				2013				Variance
Selling, general and administrative		$	83,707			$	40,753			$	42,954			$	590,975			$	277,076			$	313,899

 

For the three and six months ended June 30, 2014, R&D fees incurred in the development of the Corruven technology totaled approximately $72,354 and $552,017, respectively, as compared to $7,299 and $209,443 incurred during the six same periods in the prior year, respectively. Additionally, general and administrative expenses consisting primarily of marketing, professional fees, travel, and other miscellaneous corporate costs totaled approximately $11,353 and $38,958, for the three and six months ended June 30, 2014, as compared to $101,557 and $103,551 incurred during same periods in the prior year, respectively.

 

Net Loss

 

Net losses attributable to common stockholders for the three and six months ended June 30, 2014, were $(77,109) and $(578,712), respectively, or $(0.00) and $(0.02), respectively, per basic and diluted share, compared to net losses attributable to common stockholders for the three and six months ended June 30, 2013, were $(36,867) and $(273,190), respectively, or $(0.00) and $(0.01), respectively, per basic and diluted share.

 

Capital Resources and Liquidity

 

Cash Flows

 

The following table provides information about our net cash flow for the six months ended June 30, 2014 and 2013.

 

Cash Flow		Six Months Ended June 30,
		2014				2013
Net cash used in operating activities		$	(648,727	)		$	(143,932	)
Net cash used in investing activities			-				(184,097	)
Net cash provided by financing activities			-				362,032
Effect of exchange rate changes on cash			1,374				(6,695	)
Net Increase (Decrease) in Cash and Cash Equivalents			(647,353	)			27,308
Cash and Cash Equivalents at Beginning of the Period			669,688				56,216
Cash and Cash Equivalents at End of the Period		$	22,335			$	83,524

 

Operating Activities

 

Net cash used in operating activities was $648,727 for the six months ended June 30, 2014, as compared to $143,932 used in operating activities for the six months ended June 30, 2013. The net cash used in operating activities was mainly due to general operations of our business, primarily used for research and development costs paid to Corruven Canada, Inc., and the reduction of our historical working capital debt.

 

Investing Activities

 

Net cash used in investing activities for the six months ended June 30, 2014 and 2013 was $0 and $184,097, respectively. The net used in investing activities during the six months ended June 30, 2013 was due to the purchase of an industrial building, land and related building improvements.

 

Financing Activities

 

Net cash provided by financing activities for the six months ended June 30, 2014 and 2013 was $0 and $362,032, respectively. During the six months ended June 30, 2013 the Company received aggregate proceeds of approximately $362,032 from the sale of Common Stock and Warrants.

 

  

Need for Additional Capital

 

As of June 30, 2014 the Company had $22,335 cash on hand. We anticipate that this amount is not sufficient to satisfy our cash requirements for the following twelve months without additional funding. The Company has funded its operations and met its capital expenditures requirements primarily through cash generated from the sale of securities. We do not have any financing commitments and no assurance can be made that we will be obtaining financing at the times and terms needed. Therefore, there is substantial doubt that we will be able to continue as a going concern as we believe we will need substantial additional capital during the next 12 months on order to complete our business plan.

 

During the subsequent twelve month period, the Company believes that it will expend funds primarily on the completion of the Line of Production equipment, with additional potentially substantial costs associated with being a reporting company under the Exchange Act, including legal, accounting and audit costs. Although the Company hopes it will begin generating significant revenues in the fiscal year ending December 31, 2014, management does not believe that such revenues will provide sufficient capital to sustain its current and execute its proposed operations for the next twelve month period without raising additional capital.  Accordingly, we expect that we will require additional funding through additional equity and/or debt financings.  Although the Company has been able to historically raise capital sufficient to continue its R&D, there can be no assurance that any additional financing will become available to us, and if available, on terms acceptable to us.

 

Any financing, if available, may involve restrictive covenants that may impact our ability to conduct our business or raise additional funds on acceptable terms.  If we are unable to raise additional capital when required or on acceptable terms, we may have to delay, scale back or discontinue our expansion plans. In the event we are unable to raise additional capital we will not be able to sustain any growth or continue to operate.

 

As indicated above, we believe that we may only have sufficient funds to complete the pilot Line of Production and continue business operations through December 31, 2014. It is anticipated that the Company may begin generating significant revenue by the end of 2014, however, there can be no assurance that the Company will be able to generate significant revenues by that date and, if in fact the Company does generate significant revenue, that such revenues would be sufficient to sustain or grow the operations. It is therefore anticipated that the Company will need additional capital in order to continue operations.

 

The Company presently does not have any available credit, bank financing or other external sources of liquidity. Due to its brief history and historical operating losses, the Company's operations have not been a source of liquidity. The Company will need to obtain additional capital in order to continue operations. In order to obtain capital, the Company may need to sell additional shares of its securities or borrow funds from private lenders. There can be no assurance that additional financing will be available in amounts or on terms acceptable to the Company, if at all.

 

The Company cannot guarantee that it will be able to obtain additional capital. The Company will seek capital from the issuance of equity or debt securities, obtaining credit facilities, or other financing mechanisms. The recent downturn in the U.S. stock and debt markets could make it more difficult to obtain financing through the issuance of equity or debt securities. Even if the Company is able to raise the funds required, it is possible that it could incur unexpected costs and expenses, or experience unexpected cash requirements. Further, if the Company issues additional equity or debt securities, stockholders may experience additional dilution or the new equity securities may have rights, preferences or privileges senior to those of existing holders of the Company's Common Stock. If additional financing is not available or is not available on acceptable terms, the Company will have to curtail or may even cease its operations.

 

Off Balance Sheet Arrangements

 

None.

 

Going Concern

 

Language regarding the Company's ability to continue as a going concern has been included in the Auditor's Report included in our audited financial statements for the years ending December 31, 2012 and December 31, 2013. The accompanying financial statements have been prepared assuming we will continue as a going concern. We have had substantial operating losses for the past years and are dependent upon outside financing to continue operations. If we are not successful in generating sufficient liquidity from Company operations or in raising sufficient capital resources, on terms acceptable to us, this would have a material adverse effect on the Company's business, results of operations, liquidity and financial condition. The financial statements do not include any adjustments that might result from the outcome of this uncertainty. It is management’s plan to raise necessary funds from shareholders to satisfy the expense requirements of the Company.

 

  

Critical Accounting Policies

 

Basis of presentation

 

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. The Auditor's Report included in our audited financial statements for the years ending December 31, 2013 and December 31, 2012 included language raising doubt about our ability to continue as a going concern. Our business plans estimate that we will need to raise additional capital to continue to fund our operations and there can be no assurance that we will be able to raise any or all of the capital required. We have only generated minimal revenues since our inception and have an accumulated deficit of $2,333,709 at June 30, 2014. Unless we begin generating significant revenues in the near future, we anticipate that we will continue to incur net losses in the near term, and we may never be able to achieve profitability. We expect to continue to incur losses for the foreseeable future. In order to achieve profitable operations we need to generate significant revenues. We cannot be certain that our business strategies will be successful or that will we generate significant revenues and become profitable. As such, we believe we will need to obtain additional public or private equity financings or debt financings in order to continue operations.

 

Use of Estimates

 

Our accounting and reporting policies conform with accounting principles generally accepted in the United States of America (“U.S. GAAP”). In preparing the financial statements, we are required to make estimates and assumptions that impact the amounts reported in the financial statements and accompanying notes. Actual results could materially differ from those estimates.

 

Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist of cash and cash equivalents and trade accounts receivable. The Company maintains its cash balances in bank accounts that, at times, may exceed federally insured limits. The Company has not experienced any losses in such accounts.  We believe that the Company is not exposed to any significant credit risk on cash.

 

Revenue Recognition

 

For revenue from product sales, the Company recognizes revenue using four basic criteria that must be met before revenue can be recognized: (i) persuasive evidence that an arrangement exists; (ii) delivery has occurred; (iii) the selling price is fixed and determinable; and (iv) collectability is reasonably assured. Determination of criteria (iii) and (iv) are based on management’s judgment regarding the fixed nature of the selling prices of the products delivered and the collectability of those amounts. Provisions for discounts and rebates to customers, estimated returns and allowances, and other adjustments are provided for in the same period the related sales are recorded. The Company defers any revenue for which the product has not been delivered or is subject to refund until such time that the Company and the customer jointly determine that the product has been delivered or no refund will be required. The Company has not recognized any revenue to date.

 

Foreign Currency Translation

 

The Company’s functional currency is the Canadian dollar. The Company uses the United States dollar for financial reporting purposes.  Assets and liabilities of foreign operations are translated using current rates of exchange prevailing at the balance sheet date. Equity accounts have been translated at their historical exchange rates when the capital transaction occurred.  Statement of Operations amounts are translated at average rates in effect for the reporting period.

 

Property and Equipment

 

Property and equipment is stated at cost, less accumulated depreciation, and we depreciate it on a straight-line basis over the estimated useful lives of the assets. Additions and improvements (including interest costs for construction of qualifying long-lived assets) are capitalized. Maintenance and repair expenses are charged to expense as incurred. The cost of property and equipment sold or disposed of and the related accumulated depreciation are eliminated from the property and related accumulated depreciation accounts, and any gain or loss is credited or charged to other income (expense).

 

  

Fair Value

 

The Company adopted the Financial Accounting Standards Board (the “FASB”) standard related to fair value measurement at inception. The standard defines fair value, establishes a framework for measuring fair value and expands disclosure of fair value measurements. The standard applies under other accounting pronouncements that require or permit fair value measurements and, accordingly, does not require any new fair value measurements. The standard clarifies that fair value is an exit price, representing the amount that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants. As such, fair value is a market-based measurement that should be determined based on assumptions that market participants would use in pricing an asset or liability. As a basis for considering such assumptions, the standard established a three-tier fair value hierarchy, which prioritizes the inputs used in measuring fair value as follows.

 

Level 1. Observable inputs such as quoted prices in active markets;

 

Level 2. Inputs, other than quoted prices in active markets, that are observable either directly or indirectly; and

 

Level 3. Unobservable inputs in which there is little or no market data, which require the reporting entity to develop its own assumptions.

 

Stock-Based Compensation

 

The FASB requires that all stock-based compensation be recognized as an expense in the financial statements and that such cost be measured at the fair value of the award. We recognize compensation cost on a straight-line basis over the requisite service period for each separately vesting portion of the award.

 

Fair Value of Warrants

 

In preparing our financial statements, we must calculate the value of common stock warrants issued to investors.  The fair value of each warrant is estimated on the date of grant using the Black-Scholes option-pricing model.  The Black-Scholes option-pricing model is a generally accepted method of estimating the value of common stock warrants. The Black-Scholes option pricing model requires us to estimate the Company’s dividend yield rate, expected volatility and risk free interest rate over the life of the option.  Inaccurately estimating any one of these factors may cause the value of the option to be under or over estimated.  See the footnotes of the financial statements for the current estimates used in the Black-Scholes pricing model.

 

Weighted-Average Shares Outstanding

 

Net income per common share is calculated based on the weighted average number of shares outstanding during the period.

 

JOBS Act

 

We are an “emerging growth company” as defined in the recently-enacted JOBS Act, and we are eligible to take advantage of certain exemptions from various reporting and disclosure requirements that are applicable to public companies that are not “emerging growth companies.” As an “emerging growth company” under the JOBS Act, we are permitted to, and intend to, rely on exemptions from certain reporting and disclosure requirements, which may make our future public filings different than that of other public companies.

 

Section 107 of the JOBS Act provides that an “emerging growth company” can take advantage of the extended transition period provided in Section 7(a)(2)(B) of the Securities Act for complying with new or revised accounting standards. In other words, an “emerging growth company” can delay the adoption of certain new accounting standards until those standards would otherwise apply to private companies. We have elected to use the extended transition period for complying with new or revised accounting standards under Section 102(b)(2) of the JOBS Act, that allows us to delay the adoption of new or revised accounting standards that have different effective dates for public and private companies until those standards apply to private companies. As a result of this election, our financial statements may not be comparable to companies that comply with public company effective dates.

 

  

We will remain an “emerging growth company” until the earliest of: (i) the last day of the fiscal year during which we had total annual gross revenues of $1 billion or more, (ii) the last day of the fiscal year following the fifth anniversary of the date of the first sale of our common stock pursuant to an effective registration statement, (iii) the date on which we have, during the previous 3-year period, issued more than $1 billion in non-convertible debt or (iv) the date on which we are deemed a “large accelerated filer” as defined under the federal securities laws.

 

Recently Issued Accounting Pronouncements

 

In June 2014, the FASB issued Accounting Standards Update (“ASU”) No. 2014-10, “Elimination of Certain Financial Reporting Requirements, Including an Amendment to Variable Interest Entities”. The amendments in this update remove the definition of a development stage entity from ASC Topic 915, Development Stage Entities, thereby removing the distinction between development stage entities and other reporting entities from GAAP. In addition, the amendments eliminate the requirements for development stage entities to (1) present inception-to-date information on the statements of operations, cash flows, and stockholder’s equity, (2) label the financial statements as those of a development stage entity, (3) disclose a description of the development stage activities in which the entity is engaged, and (4) disclose in the first year in which the entity is no longer a development stage entity that in prior years it had been in the development stage. These amendments are effective for annual reporting periods beginning after December 15, 2014, with early application of the amendments permitted. The Company has elected early adoption of this standard. As such the Company no longer presents or discloses any information previously required under ASC Topic 915.

 

In July 2013, the FASB issued ASU No. 2013-11, “Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists.” ASU 2013-11 provides explicit guidance on the financial statement presentation of an unrecognized tax benefit when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists. The guidance is effective prospectively for fiscal years, and interim periods within those years, beginning after December 15, 2013, with an option for early adoption. This pronouncement is effective for reporting periods beginning on or after January 1, 2013. The adoption of ASU 2011-11 did not have a material impact on the Company’s condensed financial statements.

 

In February 2013, the FASB issued ASU No. 2013-02, Comprehensive Income (Topic 220): Reporting of Amounts Reclassified Out of Accumulated Other Comprehensive Income, to improve the transparency of reporting these reclassifications. Other comprehensive income includes gains and losses that are initially excluded from net income for an accounting period. Those gains and losses are later reclassified out of accumulated other comprehensive income into net income. The amendments in the ASU do not change the current requirements for reporting net income or other comprehensive income in financial statements. All of the information that this ASU requires already is required to be disclosed elsewhere in the financial statements under U.S. GAAP. The new amendments will require an organization to:

 

-

Present (either on the face of the statement where net income is presented or in the notes) the effects on the line items of net income of significant amounts reclassified out of accumulated other comprehensive income - but only if the item reclassified is required under U.S. GAAP to be reclassified to net income in its entirety in the same reporting period; and

-

Cross-reference to other disclosures currently required under U.S. GAAP for other reclassification items (that are not required under U.S. GAAP) to be reclassified directly to net income in their entirety in the same reporting period. This would be the case when a portion of the amount reclassified out of accumulated other comprehensive income is initially transferred to a balance sheet account (e.g., inventory for pension-related amounts) instead of directly to income or expense.

 

The amendments apply to all public and private companies that report items of other comprehensive income. Public companies are required to comply with these amendments for all reporting periods (interim and annual). The amendments are effective for reporting periods beginning after December 15, 2012, for public companies. Early adoption is permitted. The adoption of ASU No. 2013-02 is not expected to have a material impact on our financial position or results of operations.

 

In January 2013, the FASB issued ASU No. 2013-01, Balance Sheet (Topic 210): Clarifying the Scope of Disclosures about Offsetting Assets and Liabilities, which clarifies which instruments and transactions are subject to the offsetting disclosure requirements originally established by ASU 2011-11. The new ASU addresses preparer concerns that the scope of the disclosure requirements under ASU 2011-11 was overly broad and imposed unintended costs that were not commensurate with estimated benefits to financial statement users. In choosing to narrow the scope of the offsetting disclosures, the Board determined that it could make them more operable and cost effective for preparers while still giving financial statement users sufficient information to analyze the most significant presentation differences between financial statements prepared in accordance with U.S. GAAP and those prepared under IFRSs. Like ASU 2011-11, the amendments in this update will be effective for fiscal periods beginning on, or after January 1, 2013. The adoption of ASU 2013-01 is not expected to have a material impact on our financial position or results of operations.

 

  

In October 2012, the FASB issued ASU 2012-04, “Technical Corrections and Improvements” in Accounting Standards Update No. 2012-04. The amendments in this update cover a wide range of Topics in the Accounting Standards Codification. These amendments include technical corrections and improvements to the Accounting Standards Codification and conforming amendments related to fair value measurements. The amendments in this update will be effective for fiscal periods beginning after December 15, 2012. The adoption of ASU 2012-04 is not expected to have a material impact on our financial position or results of operations.

 

In August 2012, the FASB issued ASU 2012-03, “Technical Amendments and Corrections to SEC Sections: Amendments to SEC Paragraphs Pursuant to SEC Staff Accounting Bulletin (SAB) No. 114, Technical Amendments Pursuant to SEC Release No. 33-9250, and Corrections Related to FASB Accounting Standards Update 2010-22 (SEC Update)” in Accounting Standards Update No. 2012-03. This update amends various SEC paragraphs pursuant to the issuance of SAB No. 114. The adoption of ASU 2012-03 is not expected to have a material impact on our financial position or results of operations.

 

In July 2012, the FASB issued ASU 2012-02, “Intangibles – Goodwill and Other (Topic 350): Testing Indefinite-Lived Intangible Assets for Impairment” in Accounting Standards Update No. 2012-02. This update amends ASU 2011-08, Intangibles – Goodwill and Other (Topic 350): Testing Indefinite-Lived Intangible Assets for Impairment and permits an entity first to assess qualitative factors to determine whether it is more likely than not that an indefinite-lived intangible asset is impaired as a basis for determining whether it is necessary to perform the quantitative impairment test in accordance with Subtopic 350-30, Intangibles - Goodwill and Other - General Intangibles Other than Goodwill. The amendments are effective for annual and interim impairment tests performed for fiscal years beginning after September 15, 2012. Early adoption is permitted, including for annual and interim impairment tests performed as of a date before July 27, 2012, if a public entity’s financial statements for the most recent annual or interim period have not yet been issued or, for nonpublic entities, have not yet been made available for issuance. The adoption of ASU 2012-02 has not had a material impact on our financial position or results of operations.

 

In December 2011, the FASB issued ASU 2011-12, “Deferral of the Effective Date for Amendments to the Presentation of Reclassifications of Items out of Accumulated Other Comprehensive Income in Accounting Standards Update No. 2011-05. This update defers the requirement to present items that are reclassified from accumulated other comprehensive income to net income in both the statement of income where net income is presented and the statement where other comprehensive income is presented. The adoption of ASU 2011-12 has not had a material impact on our financial position or results of operations.

 

In December 2011, the FASB issued ASU No. 2011-11 “Balance Sheet: Disclosures about Offsetting Assets and Liabilities” (“ASU 2011-11”). This Update requires an entity to disclose information about offsetting and related arrangements to enable users of its financial statements to understand the effect of those arrangements on its financial position. The objective of this disclosure is to facilitate comparison between those entities that prepare their financial statements on the basis of U.S. GAAP and those entities that prepare their financial statements on the basis of IFRS. The amended guidance is effective for annual reporting periods beginning on or after January 1, 2013, and interim periods within those annual periods. The Company is currently evaluating the impact, if any, that the adoption of this pronouncement may have on its results of operations or financial position.

 

ITEM 3.

QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

 

Not Applicable.

 

ITEM 4.

CONTROLS AND PROCEDURES

 

As required by Rule 13a-15 under the Securities Exchange Act of 1934 (“Exchange Act”) we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures as June 30, 2014, being the date of our most recently completed fiscal quarter. This evaluation was carried out under the supervision and with the participation of our Chief Executive and Chief Financial Officer. Based upon that evaluation, our Chief Executive and Chief Financial Officer have concluded that our disclosure controls and procedures are not effective to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized, and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to them to allow timely decisions regarding required disclosure. Such reasons for ineffectiveness are outlined below:

 

  

Insufficient segregation of duties in our finance and accounting functions due to limited personnel.  During the quarter ended June 30, 2014, the company internally performed all aspects of our financial reporting process, including, but not limited to, access to the underlying accounting records and systems, the ability to post and record journal entries and responsibility for the preparation of the financial statements.  Due to the fact these duties were performed oftentimes by the same people, a lack of review was created over the financial reporting process that might result in a failure to detect errors in spreadsheets, calculations, or assumptions used to compile the financial statements and related disclosures as filed with the SEC.  These control deficiencies could potentially result in a material misstatement to our interim or annual financial statements that would not be prevented or detected.

 

We intend to take appropriate and reasonable steps to make the necessary improvements to remediate these deficiencies and we intend to consider the results of our remediation efforts and related testing as part of our next year-end assessment of the effectiveness of our internal control over financial reporting. However, due to the limited personnel and financial resources available to the Company at this time, the Company has been unable to ameliorate such weaknesses in our disclosure controls and procedures.

 

During our most recently completed fiscal quarter ended June 30, 2014, there were no changes in our internal control over financial reporting that have materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

 

We currently do not have an audit committee, or a person serving on our Board of Directors (the “Board”) who would qualify as a financial expert.

  

PART II

 

ITEM 1.

LEGAL PROCEEDINGS

 

We are not currently a party to any legal proceedings nor are any contemplated by us at this time.

 

ITEM 1A.

RISK FACTORS

 

Not Applicable.

 

ITEM 2.

UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

 

None.

 

ITEM 3.

DEFAULT UPON SENIOR SECURITIES

 

None.

 

ITEM 4.

REMOVED AND RESERVED

 

None.

 

ITEM 5.

OTHER INFORMATION

 

The Company held its annual 2014 shareholder meeting (the “Shareholder Meeting”) on May 10, 2014. At the Shareholder Meeting, the Company appointed Mr. Alain Belanger, Mr. Daniel Beauregard-Long, Mr. Thomas Soucy, Mr. Patrick Durepos and Mr. Maurice Guitton to the 2014 Board.

 

  

On or about June 6, 2014, the Company appointed Mr. Daniel Beauregard-Long to the position of Secretary of the Company and Mr. Conrad Belanger to the positions of interim Treasurer and Chief Financial Officer of the Company.

 

On or about July 25, 2014, the Company appointed Mr. Raymond Ouellette to the Board.

 

Below are the biographies of our current management team and 2014 Board.

 

Alain Belanger, Chief Executive Officer and Chairman of the Board of Directors

 

Mr. Belanger, the inventor of the “Corruven Composite Panel” and the founder of Corruven Inc., is our Chief Executive Officer and Chairman of the Board from our inception. Since inception he has been serving in these positions and currently and in the foreseeable future devotes approximately 90% of his professional time to the affairs of the Company. Mr. Belanger is also the President and director of Corruven Canada, Inc. since its inception in February of 2008. From December 2003 to present, Mr. Belanger has held the position of President and director of Groupe Regenord, Inc., an integrated territory management company focusing on forestry and land management. As an entrepreneur, Mr. Belanger has spend the last 25 years managing and developing his owned businesses, from forestry management and training methodology to trading wood logs and wood products all around the world. Mr. Belanger has also received extensive exposure to a wide variety of organizations and industries and has been awarded multiple prestigious awards including: specialist in developing Service New Brunswick in various African countries; Team Canada Mission to Russia, Germany and Atlanta participant; Board member of New Brunswick Economic Development Council; Board member of the Atlantic Innovation Council; Member of the Association of Registered Professional Foresters of New Brunswick; Award for “Innovation In Forestry Technology” by New Brunswick Forestry Association; Award of Africa-Canada Partnership; and “New Brunswick's Entrepreneur Of The Year” by the Economic Development Council of New Brunswick. Mr. Belanger graduated from Laval University of Quebec with a bachelor’s degree in forest engineering. Mr. Belanger is the founder of our Company and his extensive expertise and experience in the forestry and wood products industries provides invaluable guidance and leadership to our management and Board.

 

Daniel Beauregard-Long, Secretary and Director

 

Mr. Long is our Secretary and one of our Directors. From February 2012 to present, Mr. Long has been working with Corruven, Inc. with responsibilities in operations and finance. From 2010 to present, Mr. Long has held the position of Vice President of Napco Industries, Inc., an infrastructure service company focused on the industrial market. From 2011 to 2012, Mr. Long worked as an analyst for Raymond Chabot Grant Thornton LLP, an accounting firm, on restructurings, expansion projects, and buyouts. From 2007 to 2012, Mr. Long worked as project manager for the construction company Action Plus, Inc. in multi-residential projects, commercial construction, and industrial projects. Mr. Long studied at McGill University earning a Bachelor of Commerce in Finance and Accounting. Mr. Long’s business, finance and construction background brings a valued element to our Board.

 

Raymond Ouellette, Interim Treasurer and Chief Financial Officer

 

Mr. Ouellette is our interim Treasurer, Chief Financial Officer and one of our Directors.  Mr. Ouellette founded Novatech Group in 1982 and held the position of President from 1982 to 2011, and has held the position of Chairman from 2011 to present. Novatech Group is a global window and door manufacturing company based in Quebec, Canada with 450 employees, 10 divisions, and sales in North America, Europe, and Africa. From 1978 to 1982, Mr. Ouellette was the General Manager of Unik Industries Ltd, a door and molding manufacturer. From 1974 to 1976, Mr. Ouellette was the General Manager of Industries Philias Flamand Ltd, a window and door manufacturer. From 2009 to present, Mr. Ouellette has sat on the board of PPD Group.  From 2012 to present, he has sat on the board of Norbec and The County of Shefford Agricultural Society.  From 1999 to 2011, he served on the board of Dutailier. He also served on the board of Orientech from 2007 to 2011. Mr. Ouellette graduated with an engineering degree from the Technical University of Nova Scotia (now Dalhousie University) and an MBA from the University of Sherbrooke. Mr. Ouellette brings to our Board significant experience in manufacturing, international sales, and negotiations.

 

  

Thomas Soucy, Director

 

Mr. Soucy is one of our Directors. From 1996 to present, Mr. Soucy has been the Chief Executive Officer and President of Groupe Westco, Inc., a Canadian chicken production company with a focus on poultry farms, chicken processing plants, and poultry transportation. Groupe Westco, Inc. and its affiliates presently have operations in Nova Scotia, Prince Edward Island, New Brunswick, Quebec and Manitoba, Canada. In addition, Groupe Westco, Inc. has made investments in companies focusing on various additional sectors, owning 300,000 acres of land which maintain hydroelectric dams, forestry operations and saw mills. Today, the group of companies directed by Mr. Soucy generates over $325M in revenue annually and has more than 800 employees. From 1996 to present, Mr. Soucy has been representing the feather industry and a voting member at the Canadian poultry and egg processor council, a trade association representing processors and distributors of poultry, turkey and egg. From 2001 to 2004, Mr. Soucy sat on the board of the New Brunswick Power Corporation, a public utility with power generation and distribution operations. Mr. Soucy graduated with a BBA from the University of New Brunswick and followed with graduate studies at the University of New Brunswick campus and Western campus. Mr. Soucy has gathered significant background experience in operating, managing and acquiring businesses in various types of industries bringing significant value to our Board.

 

Patrick J. Durepos, Director

 

Mr. Durepos is one of our Directors. In addition, Mr. Durepos is the President of Keal Technology, Inc. and Chairman of Alliance Assurance, Inc. Mr. Durepos started in business with the purchase of a small insurance brokerage and grew it to the current Alliance Assurance, Inc. with 53 employees and annual revenues of $34M. Mr. Durepos joined Keal Technology, Inc. in the mid-1990s as a minority shareholder. Mr. Durepos led the purchase of the broker management system division from CGI Group, Inc. in 2000 and helped transform Keal Technology, Inc. into the second largest software company for insurance brokers in Canada with over 13,000 users. Mr. Durepos is also president of Broadway Place Ltd. a New Brunswick real estate company. Mr. Durepos is presently a director of ANBL (Alcohol New Brunswick) and a past director of Bruncor, Inc., the holding company of the New Brunswick Telephone Company, where he sat on the pension and audit committees. He was the founding president of the Community Futures Committee (known as CBDC) which is a network of non-profit organization that works with the private sector and governments to meet the needs of small businesses. Mr. Durepos graduated from the University of Moncton earning a Bachelor of Commerce in Accounting. Mr. Durepos brings to our Board significant board experience and a broad contact network.

 

Maurice M. Guitton, Director

 

Mr. Maurice M. Guitton is one of our Directors. From 2012 to present, Mr. Guitton has been the President of Versa Tech Consulting, Ltd., a small and medium enterprise (SME) consulting company with a focus on product development and continuous improvement. From 1987 to 2011, Mr. Guitton has held positions with Composites Atlantic, Ltd., including President and Chief Executive Officer from 2004 to 2011. A subsidiary of the European Aeronautics Defense and Space (EADS) SOGERMA Group, Composites Atlantic, Ltd. is a manufacturing company of advanced composites for the aeronautic, space, and defense industries with approximately $50M in annual revenue. Mr. Guitton has also held the position of director of the manufacturing division of Rossignol Skis working with the company from 1967 to 1987. Mr. Guitton was responsible for putting in place a manufacturing division and multiple plants for Rossignol Skis in North America. From 2004 to present, Mr. Guitton has been President and founder of the French Chamber of Commerce Atlantic Region. From 1995 to 2003, Mr. Guitton sat on the board of EADS Canada Ltd., a $450M annual revenue division of the European EADS Group. Mr. Guitton studied in mechanics, industrial design, and management at various institutions in France including E.N.P., F.P.A., and B.T.S. Mr. Guitton has developed significant experience in starting new manufacturing plants, product development, in addition to his top management experience in the composite industry which brings significant value to our Board.

 

 

ITEM 6.

EXHIBITS

 

The following exhibits are included as part of this report.

 

Exhibit #		Description
3.1		Articles of Incorporation of Corruven, Inc. as amended (incorporated by reference to Exhibit 3.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
3.2		Corporate Bylaws for Corruven, Inc. (incorporated by reference to Exhibit 3.2 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.1		Intellectual Property License Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 10.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.2		Research and Development Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 10.2 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.3		Amendment to Research and Development Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 5.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on June 10, 2013)
10.4		Amended and Restated Research and Development Agreement with Corruven Canada, Inc.
10.5		Industrial Lease Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 5.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on June 10, 2013)
10.6		Sample Series A-100 Warrant (incorporated by reference to Exhibit 10.3 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.7		Sample Series A-200 Warrant (incorporated by reference to Exhibit 10.4 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.8		Sample Series A-300 Warrant (incorporated by reference to Exhibit 10.5 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.9		Sample Series A-400 Warrant (incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K filed with the Securities and Exchange Commission on December 10, 2013)
31.1		Certification of the Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2		Certification of the Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1		Certification of the Principal Executive Officer pursuant to U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2		Certification of the Principal Financial Officer pursuant to U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101.INS**		XBRL Instance Document
101.SCH**		XBRL Taxonomy Extension Schema
101.CAL**		XBRL Taxonomy Extension Calculation Linkbase
101.DEF**		XBRL Taxonomy Extension Definition Linkbase
101.LAB**		XBRL Taxonomy Extension Label Linkbase
101.PRE**		XBRL Taxonomy Extension Presentation Linkbase

 

  

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Exchange Act, the registrant has duly caused this Quarterly Report on Form 10-Q for the period ended June 30, 2014, to be signed on its behalf by the undersigned on August 19, 2014 thereunto duly authorized.

 

	CORRUVEN, INC
	By:	/s/ Alain Belanger
		Alain Belanger
		Chief Executive Officer

 

  

EXHIBIT INDEX

 

Exhibit #		Description
3.1		Articles of Incorporation of Corruven, Inc. as amended (incorporated by reference to Exhibit 3.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
3.2		Corporate Bylaws for Corruven, Inc. (incorporated by reference to Exhibit 3.2 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.1		Intellectual Property License Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 10.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.2		Research and Development Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 10.2 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.3		Amendment to Research and Development Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 5.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on June 10, 2013)
10.4		Amended and Restated Research and Development Agreement with Corruven Canada, Inc.
10.5		Industrial Lease Agreement with Corruven Canada, Inc. (incorporated by reference to Exhibit 5.1 to the Company’s Form S-1 filed with the Securities and Exchange Commission on June 10, 2013)
10.6		Sample Series A-100 Warrant (incorporated by reference to Exhibit 10.3 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.7		Sample Series A-200 Warrant (incorporated by reference to Exhibit 10.4 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.8		Sample Series A-300 Warrant (incorporated by reference to Exhibit 10.5 to the Company’s Form S-1 filed with the Securities and Exchange Commission on October 31, 2012)
10.9		Sample Series A-400 Warrant (incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K filed with the Securities and Exchange Commission on December 10, 2013)
31.1		Certification of the Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2		Certification of the Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1		Certification of the Principal Executive Officer pursuant to U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
32.2		Certification of the Principal Financial Officer pursuant to U.S.C. Section 1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101.INS**		XBRL Instance Document
101.SCH**		XBRL Taxonomy Extension Schema
101.CAL**		XBRL Taxonomy Extension Calculation Linkbase
101.DEF**		XBRL Taxonomy Extension Definition Linkbase
101.LAB**		XBRL Taxonomy Extension Label Linkbase
101.PRE**		XBRL Taxonomy Extension Presentation Linkbase