MICROPAC INDUSTRIES INC - FORM 10-Q

Attached files

file	filename
EX-31.2 - MICROPAC INDUSTRIES INC	micro10qex312052811.htm
EX-32.2 - MICROPAC INDUSTRIES INC	micro10qex322052811.htm
EX-31.1 - MICROPAC INDUSTRIES INC	micro10qex311052811.htm
EX-32.1 - MICROPAC INDUSTRIES INC	micro10qex321052811.htm

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C.20549

FORM 10-Q

(Mark One)


þ		QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended May 28, 2011


o		TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission File Number 0-5109

MICROPAC INDUSTRIES, INC.

Delaware	75-1225149
(State of Incorporation)	(IRS Employer Identification No.)

905 E. Walnut, Garland, Texas	75040
(Address of Principal Executive Office)	(Zip Code)

Registrant’s Telephone Number, including Area Code	(972) 272-3571

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes x No o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer o	Accelerated filer o
Non-accelerated filero	Smaller reporting company x
(Do not check if a smaller reporting company)

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes o No x

On July 12, 2011 there were 2,578,315 shares of Common Stock, $.10 par value outstanding.

MICROPAC INDUSTRIES, INC.

FORM 10-Q

May 28, 2011

INDEX

PART I - FINANCIAL INFORMATION

		ITEM 1 - FINANCIAL STATEMENTS

			Condensed Balance Sheets as of May 28, 2011 (unaudited) and November 30, 2010
			Condensed Statements of Operations for the three and six months ended May 28, 2011 and May 29, 2010 (unaudited)
			Condensed Statements of Cash Flows for the six months ended May 28, 2011 and May 29, 2010 (unaudited)
			Notes to Condensed Financial Statements (unaudited)

		ITEM 2 - MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

		ITEM 3 - QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

		ITEM 4 - CONTROLS AND PROCEDURES



PART II-OTHER INFORMATION

	ITEM 1 - LEGAL PROCEEDINGS
	ITEM 1A -RISK FACTORS
	ITEM 2 - UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS
	ITEM 3 - DEFAULTS UPON SENIOR SECURITIES
	ITEM 4 - RESERVED
	ITEM 5 - OTHER INFORMATION
	ITEM 6 - EXHIBITS


SIGNATURES

PART I - FINANCIAL INFORMATION

ITEM 1 - FINANCIAL STATEMENTS

MICROPAC INDUSTRIES, INC.

CONDENSED BALANCE SHEETS

(Dollars in thousands, except per share data)

ASSETS
	(Unaudited)
CURRENT ASSETS	05/28/11			11/30/10

Cash and cash equivalents	$	8,337		$	9,085
Short-term investment		2,000			1,000
Accounts receivable		1,960			2,893
Inventories:
Raw materials		2,795			2,302
Work-in process		2,321			2,819
Total inventories		5,116			5,121
Prepaid expenses and other current assets		231			239
Deferred income tax		913			913
Total current assets		18,557			19,251

PROPERTY, PLANT AND EQUIPMENT, at cost:
Land		80			80
Buildings		498			498
Facility improvements		1,059			882
Machinery and equipment		7,401			6,936
Furniture and fixtures		672			632
Total property, plant, and equipment		9,710			9,028
Less accumulated depreciation		(7,730	)		(7,582	)
Net property, plant, and equipment		1,980			1,446

Total assets	$	20,537		$	20,697

LIABILITIES AND SHAREHOLDERS’ EQUITY

CURRENT LIABILITIES:
Accounts payable	$	787		$	700
Accrued compensation		525			766
Other accrued liabilities		445			573
Deferred revenue		158			834
Income taxes payable		11			75
Total current liabilities		1,926			2,948

DEFERRED INCOME TAXES		277			277

SHAREHOLDERS’ EQUITY
Common stock, ($.10 par value), authorized 10,000,000 shares, 3,078,315 issued and 2,578,315 outstanding at May 28, 2011 and November 30, 2010		308			308
Paid-in capital		885			885
Treasury stock, 500,000 shares, at cost		(1,250	)		(1,250	)
Retained earnings		18,391			17,529

Total shareholders’ equity		18,334			17,472

Total liabilities and shareholders’ equity	$	20,537		$	20,697

See accompanying notes to financial statements.

MICROPAC INDUSTRIES, INC.

CONDENSED STATEMENTS OF OPERATIONS

(Dollars in thousands except per share data)

(Unaudited)

	For the three months ended						For the six months ended
	05/28/11			05/29/10			05/28/11			05/29/10


NET SALES	$	5,437		$	5,788		$	11,027		$	10,364

COST AND EXPENSES:

Cost of goods sold		(3,529	)		(3,611	)		(6,931	)		(6,435	)

Research and development		(246	)		(116	)		(395	)		(263	)

Selling, general & administrative expenses		(978	)		(1,011	)		(1,958	)		(1,939	)

Total cost and expenses		(4,753	)		(4,738	)		(9,284	)		(8,637	)

OPERATING INCOME BEFORE INTEREST AND INCOME TAXES		684			1,050			1,743			1,727

Interest and other income		7			7			7			88

INCOME BEFORE TAXES	$	691		$	1,057		$	1,750		$	1,815

Provision for taxes		(249	)		(380	)		(630	)		(653	)

NET INCOME	$	442		$	677		$	1,120		$	1,162
NET INCOME PER SHARE, BASIC AND DILUTED	$	.17		$	.26		$	.43		$	.45

DIVIDENDS PER SHARE	$	0		$	0		$	.10		$	.10

WEIGHTED AVERAGE OF SHARES, Basic and diluted		2,578,315			2,578,315			2,578,315			2,578,315

See accompanying notes to financial statements.

MICROPAC INDUSTRIES, INC.

CONDENSED STATEMENTS OF CASH FLOWS

(Dollars in thousands)

(Unaudited)

	For the six months ended
	5/28/11			5/29/10
CASH FLOWS FROM OPERATING ACTIVITIES:
Net income	$	1,120		$	1,162
Adjustments to reconcile net income to
net cash provided by (used in) operating activities:
Depreciation and amortization		148			129
Changes in certain current assets and liabilities
(Increase)decrease in accounts receivable		933			(522	)
(Increase)decrease in inventories		5			(258	)
(Increase)decrease in prepaid expense and other current assets		8			(99	)
Decrease in deferred revenue		(676	)		(732	)
Increasein accounts payable		87			14
Decrease in accrued compensation		(241	)		(5	)
Decrease in other accrued liabilities		(128	)		(55	)
Increase (decrease) in income taxes payable		(64	)		309

Net cash provided by (used in) operating activities		1,192			(57	)

CASH FLOWS FROM INVESTING ACTIVITIES:
Purchase of short term investments		(1,000	)		-
Additions to property, plant and equipment		(682	)		(269	)

Net cash used in investing activities		(1,682	)		(269	)

CASH FLOWS FROM FINANCING ACTIVITIES
Cash dividend		(258	)		(258	)

Net cash used in financing activities		(258	)		(258	)

Net change in cash and cash equivalents		(748	)		(584	)

Cash and cash equivalents at beginning of period		9,085			6,802

Cash and cash equivalents at end of period	$	8,337		$	6,218

Supplemental Cash Flow Disclosure:

Cash paid for income taxes	$	694		$	342

See accompanying notes to financial statements.

MICROPAC INDUSTRIES, INC.

NOTES TO FINANCIAL STATEMENTS

(Unaudited)

Note 1 BASIS OF PRESENTATION

Business Description

Micropac Industries, Inc. (the “Company”), a Delaware corporation, manufactures and distributes various types of hybrid microelectronic circuits, solid state relays, power operational amplifiers, and optoelectronic components and assemblies. The Company’s products are used as components in a broad range of military, space and industrial systems, including aircraft instrumentation and navigation systems, power supplies, electronic controls, computers, medical devices, and high-temperature (200o C) products. The Company’s products are either custom (being application specific circuits designed and manufactured to meet the particular requirements of a single customer) or standard, proprietary components such as catalog items.

The Company’s facilities are certified and qualified by Defense Supply Center Columbus (DSCC) to MIL-PRF-38534 (class K-space level), MIL-PRF-19500 JANS (space level), and MIL-PRF-28750 (class K-space level) and is certified to ISO 9001-2002. Micropac is a NASA core supplier, and is registered to AS9100-Aerospace Industry standard for supplier certification.

The Company’s core technology is the packaging and interconnecting of miniature electronic components, utilizing thick film and thin film substrates, and forming microelectronics circuits. Other technologies include light emitting and light sensitive materials and products, including light emitting diodes and silicon phototransistors used in the Company’s optoelectronic components and assemblies.

In the opinion of management, the unaudited financial statements include all adjustments (consisting of only normal, recurring adjustments) necessary to present fairly the financial position as of May 28, 2011, the results of operations for the three months and six months ended May 28, 2011 and May 29, 2010, and the cash flows for the six months ended May 28, 2011 and May 29, 2010. Unaudited financial statements are prepared on a basis substantially consistent with those audited for the year ended November 30, 2010. Certain information and footnote disclosures normally included in financial statements prepared in accordance with U.S. generally accepted accounting principles have been condensed or omitted pursuant to the rules and regulations promulgated by the Securities and Exchange Commission. However, management believes that the disclosures contained are adequate to make the information presented not misleading.

Note 2 SIGNIFICANT ACCOUNTING POLICIES

Use of Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of sales and expenses during the reporting period. Actual results could differ from those estimates.

Revenue Recognition

Revenues are recorded as shipments are made based upon contract prices. Any losses anticipated on fixed price contracts are provided for currently. Sales are recorded net of sales returns, allowances and discounts.

The Company recognizes revenue in accordance with Financial Accounting Standards Board (FASB) Accounting Standards Codification (ASC) Subtopic 605-10-S99, Revenue Recognition (ASC 605-10-S99). ASC 605-10-S99 requires that four basic criteria must be met before revenues can be recognized: (1) persuasive evidence of an arrangement exists; (2) shipment hasoccurred or services have been rendered; (3) the fee is fixed and determinable;and (4) collectibility is reasonably assured.

Deferred revenue represents prepayments from customers and will be recognized as revenue when the products are shipped per the terms of the contract.

Short-Term Investments

The Company has $2,000,000 in short term investments at May 28, 2011. Short-term investments consist of certificates of deposits with maturities greater than 90 days. These investments are reported at historical cost, which approximates fair value. All highly liquid investments with maturities of 90 days or less at date of purchase are classified as cash equivalents. All short-term investments are securities which the Company has the ability and intent to hold to maturity and mature within one year.

Inventories

Inventories are stated at lower of cost or market value and include material, labor and manufacturing overhead. All inventories are valued using the FIFO (first-in, first-out) method of inventory valuation. The Company writes down obsolete and overstocked inventorybased on the usage of inventory over a three year period and projected usage based on current backlog.

Income Taxes

The Company accounts for income taxes using the asset and liability method. Under this method the Company records deferred income taxes for the temporary differences between the financial reporting basis and the tax basis of assets and liabilities at enacted tax rates expected to be in effect when such amounts are realized or settled. The resulting deferred tax liabilities and assets are adjusted to reflect changes in tax law or rates in the period that includes the enactment date.

Property, Plant, and Equipment

Property, plant, and equipment are carried at cost, and depreciation is provided using the straight-line method at rates based upon the following estimated useful lives (in years) of the assets:

	Buildings	15
	Facility improvements	8-15
	Machinery and equipment	5-10
	Furniture and fixtures	5-8

The Company assesses long-lived assets for impairment under ASC 360-10-35, Property, Plant and Equipment – Subsequent Measurement. When events or circumstances indicate that an asset may be impaired, an assessment is performed. The estimated future undiscounted cash flows associated with the asset are compared to the asset’s net book value to determine if a write down to market value less cost to sell is required.

Repairs and maintenance are expensed as incurred. Improvements which extend the useful life of property, plant, and equipment are capitalized.

Research and Development Costs

Costs for the design and development of new products are expensed as incurred.

Note 3 RELATED PARTY TRANSACTIONS

Mr. Eugene Robinson, a director of the Company and member of the Company’s audit committee, provides advisory services to the Company. Mr. Robinson received$1,800 in advisory fees in the second quarter and first six monthsof 2011 and received $1,800 in the second quarter and first six monthsof 2010.

Note 4 STOCK-BASED COMPENSATION

On March 1, 2001, the Company’s shareholders approved the 2001 Employee Stock Option Plan (the “Stock Plan”) with 500,000 options available to be granted. No options have been granted to date.

Note 5 COMMITMENTS

At May 28, 2011, the Company had an existing $6,000,000 line of credit with a Texas banking institution. The interest rate was equal to the prime rate. The line of credit requires that the Company maintain certain financial ratios. The financial covenants require the Company to maintain a quick ratio of at least 1:1, maintain a tangible net worth of $10,000,000 and maintain a total liabilities to tangible net worth of less than 1.25:1. The Company is in compliance with these covenants. The Company has not used any of the available line of credit.

On June 1, 2011, the Company renewed the revolving line of credit agreement with a bank for a term of two years. The interest rate is equal to the prime rate. The line of credit requires that the Company maintain certain financial ratios. The financial covenants require the Company to maintain a quick ratio of at least 1:1, maintain a tangible net worth of $10,000,000 and maintain a total liabilities to tangible net worth of less than 1.25:1. The Company has not, to date, used any of the available line of credit. The Company expects to continue to generate adequate amounts of cash to meet its liquidity needs from the sale of products and services and the collection thereof.

Note 6 EARNINGS PER COMMON SHARE

Basic and diluted earnings per share are computed based upon the weighted average number of shares outstanding during the respective periods.Dilutedearningspersharegive effect to all dilutive potentialcommonshares.For the six months ended May 28, 2011 and May 29, 2010, the Company had no dilutive potential common stock.

Note 7 SHAREHOLDERS’ EQUITY

On January 11, 2010, the Board of Directors of Micropac Industries, Inc. approved the payment of a special dividend of $0.10 per share for all shareholders of record on January 25, 2010. The dividend was paid to shareholders on February 17, 2010.

On December 16, 2010, the Board of Directors of Micropac Industries, Inc. approved the payment of a special dividend of $0.10 per share for shareholders of record as of January 18, 2011. The dividend was paid to the shareholders on February 10, 2011.

Note 8 SUBSEQUENT EVENTS

Management has evaluated subsequent events after the balance sheet date, through the issuance of the financial statements, for appropriate accounting and disclosure.

MICROPAC INDUSTRIES, INC.

(Unaudited)

ITEM 2 - MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Business

Results of Operations

	Three months ended						Six months ended
	5/28/2011			5/29/2010			5/28/2011			5/29/2010
NET SALES		100.0	%		100.0	%		100.0	%		100.0	%

COST AND EXPENSES:
Cost of Goods Sold		64.9	%		62.4	%		62.9	%		62.1	%
Research and development		4.5	%		2.0	%		3.5	%		2.5	%
Selling, general & administrative expenses		18.0	%		17.5	%		17.8	%		18.7	%
Total cost and expenses		87.4	%		81.9	%		84.2	%		83.3	%

OPERATING INCOME BEFORE INTEREST		12.6	%		18.1	%		15.8	%		16.7	%
AND INCOME TAXES

Interest income		.1	%		.2	%		.1	%		.8	%

INCOME BEFORE TAXES		12.7	%		18.3	%		15.9	%		17.5	%

Provision for taxes		4.6	%		6.6	%		5.7	%		6.3	%

NET INCOME		8.1	%		11.7	%		10.2	%		11.2	%

Sales for the threeand six month periods ended May 28, 2011 totaled $5,437,000 and $11,027,000, respectively. Sales for the second quarter decreased 6.1% or $351,000 below sales for the same period of 2010, while sales for the first six months of 2011 increased 6.4% or $663,000 above the first six months of 2010. Sales were 22% in the commercial market, 42% in the military market, and 36% in the space market for the six months ended May 28, 2011 compared to 14% in the commercial market, 55% in the military market, and 31% in the space market for the six months ended May 29, 2010.The Company's management anticipates a decrease innew orders for space level products in 2011 resulting in lower sales and operating margins inthe second half of 2011 and year to date as compared to 2010.

One customer accounted for 11% of the Company’s sales for the six months ended May 28, 2011 and one customer accounted for 17% of the Company’s sales for the six months ended May 29, 2010.

Cost of goods sold for the second quarters of 2011and 2010 totaled 64.9% and 62.4% of net sales, respectively, while cost of goods sold for the six months ended May 28, 2011andMay 29, 2010 totaled 62.9% and 62.1% of net sales, respectively. Theincrease in cost of goods sold as a percentage of sales is attributable to changes in product mix.

Research and development expenseincreased $130,000 for the second quarter of 2011 versus 2010 and increased $132,000 for the first six months of 2011 compared to the same period of 2010. The research and development expenditures were associated with continued development of power management products and high temperature products.

Selling, general and administrative expense for the second quarter and first six months of 2011 totaled 18.0% and 17.8% of net sales, respectively, compared to 17.5% and 18.7% for the same periods in 2010. In actual dollars, selling, general and administrative expense decreased $33,000 for the second quarter and increased $19,000 for the first six months of 2011compared to the same periods in 2010.

For the first six months of 2010 other income included a $79,000 gain from the sale of obsolete inventory.

Provisions for taxes decreased $131,000 for the second quarter and $23,000 for the first six months of 2011 compared to the same periods in 2010. The estimated effective tax rate was 36% for 2011 and 2010.

Accounts receivable, net, totaled $1,960,000 as of May 28, 2011 and represents a decrease of $933,000 since November 30, 2010, due to improved collections with days sales of 32 compared to 43days at November 30, 2010.

Property, plant, and equipment investments totaled $682,000 since November 30, 2010. The Company invested $465,000 in new test and x-ray equipment, and $177,000 in facilities improvements.

Liquidity and Capital Resources

Cash and cash equivalents totaled $8,337,000 as of May 28, 2011 compared to $9,085,000 on November 30, 2010, a decrease of $748,000. The decrease in cash and cash equivalents is attributable to $1,192,000 cash flow from operations, offset by the payment of a cash dividend of $258,000, $1,000,000 invested in certificates of deposit and the investment of $682,000 in equipment and facility improvements.

At May 28, 2011, theCompany had an existing $6,000,000 line of credit with a Texas banking institution. The interest rate wasequal to the prime rate. The line of credit requires that the Company maintain certain financial ratios. The financial covenants require the Company to maintain a quick ratio of at least 1:1, maintain a tangible net worth of $10,000,000 and maintain a total liabilities to tangible net worth of less than 1.25:1. The Company is in compliance with these covenants. The Company has not used any of the available line of credit.

On June 1, 2011, the Company renewed the revolving line of credit agreement with a bank for a term of two years.The interest rate is equal to the prime rate. The line of credit requires that the Company maintain certain financial ratios. The financial covenants require the Company to maintain a quick ratio of at least 1:1, maintain a tangible net worth of $10,000,000 and maintain a total liabilities to tangible net worth of less than 1.25:1. The Company has not, to date, used any of the available line of credit.

The Company expects to continue to generate adequate amounts of cash to meet its liquidity needs from the sale of products and services and the collection thereof for at least the next twelve months.

Outlook

New orders for the second quarter and year-to-date 2011 totaled $3,662,000 and $7,852,000, respectively, compared to $4,612,000 and $10,033,000 for the comparable periods of 2010.The fluctuation resulted from a decrease in new orders on various space level microcircuits products,and management anticipates continued softening of new orders for the remainder of 2011.

The Company's management expects sales and operating income to decrease in the second half of 2011 as compared to the second half of 2010, based on the current backlog of space level product. The backlog of space level products decreased approximately $3,700,000 at November 30, 2010 compared to November 30, 2009. The backlog of space level products was approximately $2,079,000 on May 28, 2011 compared to $6,446,000 on May 29, 2010.

Backlog totaled $8,024,000 on May 28, 2011 compared to $13,417,000 as of May 29, 2010 and $11,143,000 on November 30, 2010. The majority of the backlog is expected to be shipped in the next twelve (12) months and represents a good mix of the company’s products and technologies with 26% in the commercial market, 48% in the military market, and 26% in the space market compared to 9% in the commercial market, 43% in the military market, and 48% in the space market at May 29, 2010. The majority of the decrease in the backlog is in microcircuits space level products.

The Company cannot assure that the results of operations for the interim period presented are indicative of total results for the entire year due to fluctuations in customer delivery schedules, or other factors over which the Company has no control.

Cautionary Statement

This Form 10-Q contains forward-looking statements that are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. Actual results could differ materially. Investors are warned that forward-looking statements involve risks and unknown factors including, but not limited to, customer cancellation or rescheduling of orders, problems affecting delivery of vendor-supplied raw materials and components, unanticipated manufacturing problems and availability of direct labor resources.

The Company produces silicon phototransistors and light emitting diode die for use in certain military, standard and custom products. Fabrication efforts sometimes may not result in successful results, limiting the availability of these components. Competitors offer commercial level alternatives and our customers may purchase our competitors’ products if the Company is not able to manufacture the products using these technologies to meet the customer demands.

The Company disclaims any responsibility to update the forward-looking statements contained herein, except as may be required by law.

ITEM 3.QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not applicable

ITEM 4.CONTROLS AND PROCEDURES

(a)	Evaluation of disclosure controls and procedures.

The Chief Executive Officer and Chief Financial Officer of the Company evaluated the Company’s disclosure controls and procedures (as defined in Exchange Act Rules 13a-15 (e)) as of May 28, 2011 and, based on this evaluation, concluded that the Company’s disclosure controls and procedures are functioning in an effective manner to ensure that the information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act, is recorded, processed, summarized and reported, within the time periods specified in the SEC’s rules and forms.

(b)	Changes in internal controls.

There has been no change in the Company’s internal control over financial reporting that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting during the three month period ended May 28, 2011.

PART II - OTHER INFORMATION

ITEM 1. LEGAL PROCEEDINGS

The Company is not involved in any material current or pending legal proceedings.

ITEM 1A RISK FACTORS

Information about risk factors for the three months ended May 28, 2011 does not differ materially from that set forth in Part I, Item 1A, of our Annual Report on Form 10-K for the year ended November 30, 2010.

ITEM 2. UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS

None

ITEM 3. DEFAULTS UPON SENIOR SECURITIES

None

ITEM 4. RESERVED

None

ITEM 5. OTHER INFORMATION

None

ITEM 6. EXHIBITS

(a) Exhibits

31.1	Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes- Oxley Act of 2002
31.2	Certification of Chief Accounting Officer pursuant to Section 302 of the Sarbanes- Oxley Act of 2002
32.1	Certification of Chief Executive Officer pursuant to 18 U.S.C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley act of 2002.
32.2	Certification of Chief Accounting Officer pursuant to 18 U. S. C. section 1350, as adopted pursuant to section 906 of the Sarbanes-Oxley act of 2002.

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned duly authorized.

MICROPAC INDUSTRIES, INC.

July 12,2011	/s/ Mark King
Date	Mark King
	Chief Executive Officer


July 12,2011	/s/ Patrick Cefalu
Date	Patrick Cefalu
	Chief Financial Officer

Attached files

Stock widget

Investing forum

MICROPAC INDUSTRIES INC Reports

Also read