Exhibit 10.1

THIRD AMENDMENT AGREEMENT

     This THIRD AMENDMENT AGREEMENT (this “Amendment”) is made as of the 1^st day of April, 2011 among:

     (a) GIBRALTAR INDUSTRIES, INC., a Delaware corporation (“Gibraltar”);

     (b) GIBRALTAR STEEL CORPORATION OF NEW YORK, a New York corporation (“GSNY” and, together with Gibraltar, collectively, “Borrowers” and, individually, each a “Borrower”);

     (c) the Lenders, as defined in the Credit Agreement, as hereinafter defined;

     (d) KEYBANK NATIONAL ASSOCIATION, as the lead arranger, sole book runner and administrative agent for the Lenders under the Credit Agreement (“Agent”);

     (e) JPMORGAN CHASE BANK, N.A. and BMO CAPITAL MARKETS FINANCING, INC, as co-syndication agents; and

     (f) HSBC BANK USA, NATIONAL ASSOCIATION and MANUFACTURERS AND TRADERS TRUST COMPANY, as co-documentation agents.

     WHEREAS, Borrowers, Agent and the Lenders are parties to that certain Third Amended and Restated Credit Agreement, dated as of July 24, 2009, that provides, among other things, for loans and letters of credit aggregating Two Hundred Million Dollars ($200,000,000), all upon certain terms and conditions (as amended and as the same may from time to time be further amended, restated or otherwise modified, the “Credit Agreement”);

     WHEREAS, Borrowers, Agent and the Lenders desire to amend the Credit Agreement to modify certain provisions thereof and add certain provisions thereto;

     WHEREAS, each capitalized term used herein and defined in the Credit Agreement, but not otherwise defined herein, shall have the meaning given such term in the Credit Agreement; and

     WHEREAS, unless otherwise specifically provided herein, the provisions of the Credit Agreement revised herein are amended effective as of the date of this Amendment;

     NOW, THEREFORE, in consideration of the premises and of the mutual covenants herein and for other valuable consideration, the receipt and sufficiency of which is hereby acknowledged, Borrowers, Agent and the Lenders agree as follows:

     1. Amendment to Definitions in the Credit Agreement. Section 1.1 of the Credit Agreement is hereby amended to delete the definition of “Borrowing Base” therefrom and to insert in place thereof the following:

     “Borrowing Base” means an amount equal to the total of the following:

     (a) up to eighty-five percent (85%) of the aggregate amount due and owing on Eligible Accounts Receivable of each Borrowing Base Company; plus

     (b) during the Special D.S. Brown Borrowing Base Period, up to fifty percent (50%) of the aggregate amount due and owing on the Agreed D.S. Brown Eligible Accounts Receivable; plus

     (c) the lowest of:

     (i) the sum of:

     (A) the lesser of:

     (1) up to sixty-five percent (65%) of the aggregate of the cost or market value (whichever is lower), as determined on a first-in first-out basis in accordance with GAAP, of the Eligible Inventory of each Borrowing Base Company; and

     (2) the cost or market value (whichever is lower), as determined on a first-in first-out basis in accordance with GAAP, of Eligible Inventory, multiplied by up to eighty-five percent (85%) of the Appraised Inventory NOLV Percentage; plus

     (B) during the Special D.S. Brown Borrowing Base Period, up to forty percent (40%) of the aggregate of the cost or market value (whichever is lower), as determine on a first-in first-out basis in accordance with GAAP, of the Agreed D.S. Brown Eligible Inventory; and

     (ii) One Hundred Million Dollars ($100,000,000); plus

     (d) the Fixed Asset Advance; minus

     (e) Reserves for Designated Hedge Agreements established pursuant to Section 2.13(b) hereof; minus

     (f) other Reserves, if any;

provided that, anything herein to the contrary notwithstanding, Agent shall at all times have the right to reduce such percentages or dollar amount caps from time to time, in its reasonable credit judgment.

     2. Additions to Definitions in the Credit Agreement. Section 1.1 of the Credit Agreement is hereby amended to add the following new definitions thereto:

     “Agreed D.S. Brown Eligible Account Receivable” means an Account that is an account receivable (i.e., each specific invoice) of D.S. Brown that would, if D.S. Brown was a Borrowing Base Company, meet the requirements of an Eligible Account Receivable, as determined by Agent in its reasonable discretion.

     “Agreed D.S. Brown Eligible Inventory” means Inventory of D.S. Brown that would, if D.S. Brown was a Borrowing Base Company, meet the requirements of Eligible Inventory, as determined by Agent in its reasonable discretion.

     “D.S.B. Holding” means D.S.B. Holding Corp., a Delaware corporation.

     “D.S. Brown” means The D.S. Brown Company, an Ohio corporation.

     “D.S. Brown Acquisition” means the Acquisition by Gibraltar of all of the outstanding equity interests of D.S.B. Holding pursuant to the D.S. Brown Acquisition Documents.

     “D.S. Brown Acquisition Date” means the date that the D.S. Brown Acquisition is consummated, pursuant to the D.S. Brown Acquisition Documents.

     “D.S. Brown Acquisition Documents” means the D.S. Brown Purchase Agreement and each other document executed and delivered in connection therewith.

     “D.S. Brown Purchase Agreement” means that certain Stock Purchase Agreement, dated as of March 10, 2011, by and among the stockholders of D.S.B. Holding and Gibraltar.

     “Special D.S. Brown Borrowing Base Period” means the period from the D.S. Brown Acquisition Date to the earlier of (a) the date D.S. Brown becomes a Borrowing Base Company pursuant to Section 2.15 hereof, or (b) forty-five (45) days after the D.S. Brown Acquisition Date.

     3. Amendment to Addition of Borrowing Base Company Provisions. Section 2.15 of the Credit Agreement is hereby amended to delete subsection (a) therefrom and to insert in place thereof the following:

     (a) such Domestic Subsidiary shall have complied with all requirements of Section 5.20 hereof,

     4. Amendment to Acquisition Covenant Provisions. Section 5.13 of the Credit Agreement is hereby amended to delete subsections (e), (g) and (h) therefrom and to insert in place thereof, respectively, the following:

     (e) if the Accounts and Inventory acquired in connection with such Acquisition are proposed to be included in the determination of the Borrowing Base, Agent shall have conducted a field examination and appraisal of such Accounts and Inventory to its reasonable satisfaction; provided that, with respect to the D.S. Brown Acquisition, such field examination and appraisal may be conducted within forty-five (45) days after the D.S. Brown Acquisition Date;

     (g) Borrowers shall have provided to Agent, at least five Business Days prior to such Acquisition, historical financial statements of the target entity and a pro forma financial statement of the Companies accompanied by a certificate of a Financial Officer showing (i) pro forma compliance with Section 5.7 hereof, both before and after giving effect to the proposed Acquisition, (ii) Revolving Credit Availability of no less than Fifty Million Dollars ($50,000,000) after giving effect to such Acquisition, and (iii) that the target entity has generated positive Target EBITDA (excluding proposed synergies or other post acquisition actions or enhancements) for the most recently completed twelve (12) consecutive calendar months prior to such Acquisition; provided that compliance with subpart (ii) above shall not be required with respect to the D.S. Brown Acquisition, unless any Company shall have made a significant asset disposition subsequent to January 28, 2011 and prior to the D.S. Brown Acquisition Date; and

     (h) the aggregate Consideration paid by the Companies for such Acquisition:

     (i) shall not exceed the aggregate amount of Seventy-Five Million Dollars ($75,000,000) (except that the D.S. Brown Acquisition may be for aggregate Consideration of up to One Hundred Five Million Dollars ($105,000,000), so long as the D.S. Brown Acquisition occurs prior to April 30, 2011); and

     (ii) when added to all other Acquisitions (including the D.S. Brown Acquisition) for all Companies during the Commitment Period, shall not exceed the aggregate amount of One Hundred Fifty Million Dollars ($150,000,000).

     5. Amendment to Deposit and Securities Accounts Provisions. Article VI of the Credit Agreement is hereby amended to delete Section 6.19 therefrom and to insert in place thereof the following:

     Section 6.19. Deposit and Securities Accounts. Borrowers have provided to Agent a list of all banks, other financial institutions and Securities Intermediaries at which any Credit Party maintains Deposit Accounts or Securities Accounts as of the D.S. Brown Acquisition Date, which list correctly identifies the name, address and telephone number of each such financial institution or Securities Intermediary, the name in which the account is held, a description of the purpose of the account, and the complete account number therefor.

     6. Amendment to Schedules After the D.S. Brown Acquisition Date. Upon the acceptance by Agent of the updated Schedules to the Credit Agreement pursuant to Section 8 hereof, the Credit Agreement shall be amended to delete Schedule 2 (Guarantors of Payment), Schedule 3 (Borrowing Base Companies), Schedule 4 (Real Property), Schedule 5 (Pledged Securities), Schedule 6.1 (Corporate Existence; Subsidiaries; Foreign Qualification), Schedule 6.9 (Locations), Schedule 6.17 (Intellectual Property) and Schedule 6.19 (Deposit Accounts) therefrom, and to insert in place thereof, respectively, a new Schedule 2, Schedule 3, Schedule 4, Schedule 5, Schedule 6.1, Schedule 6.9, Schedule 6.17 and Schedule 6.19.

     7. Closing Deliveries. Concurrently with the execution of this Amendment, Borrowers shall:

     (a) cause each Guarantor of Payment to execute the attached Guarantor Acknowledgment and Agreement; and

     (b) pay all legal fees and expenses of Agent in connection with this Amendment and any other Loan Documents.

     8. Required Deliveries After the D.S. Brown Acquisition. On or before each of the dates specified in this Section 8, Borrowers shall satisfy each of the items specified in the subparts below:

     (a) within twenty (20) days after the D.S. Brown Acquisition Date, unless a longer period is agreed to by Agent in writing, Borrowers shall deliver to Agent the following replacement Schedules to the Credit Agreement, in each case, as may be requested by Agent, to be in form and substance acceptable to Agent and giving effect to the D.S. Brown Acquisition: Schedule 2 (Guarantors of Payment), Schedule 3 (Borrowing Base Companies), Schedule 4 (Real Property), Schedule 5 (Pledged Securities), Schedule 6.1 (Corporate Existence; Subsidiaries; Foreign Qualification), Schedule 6.9 (Locations), Schedule 6.17 (Intellectual Property) and Schedule 6.19 (Deposit Accounts); and

     (b) within ten days after the D.S. Brown Acquisition Date, unless a longer period is agreed to by Agent in writing, Borrowers shall cause D.S.B. Holding and any Subsidiary of D.S.B. Holding (other than a Non-Material Subsidiary) to deliver to Agent:

     (i) an executed joinder agreement to the Guaranty of Payment, such agreement to be prepared by Agent and in form and substance acceptable to Agent;

     (ii) an executed joinder agreement to the Pledge and Security Agreement, such agreement to be prepared by Agent and in form and substance acceptable to Agent;

     (iii) such other supporting documentation, Security Documents, corporate governance documents, authorization documents, lien searches and an opinion of counsel as may be deemed necessary or advisable by Agent.

     9. Representations and Warranties. Borrowers hereby represent and warrant to Agent and the Lenders that (a) Borrowers have the legal power and authority to execute and deliver this Amendment; (b) the officers executing this Amendment have been duly authorized to execute and deliver the same and bind Borrowers with respect to the provisions hereof; (c) the execution and delivery hereof by Borrowers and the performance and observance by Borrowers of the provisions hereof do not violate or conflict with the Organizational Documents of Borrowers or any law applicable to Borrowers or result in a breach of any provision of or constitute a default under any other agreement, instrument or document binding upon or enforceable against Borrowers; (d) no Default or Event of Default exists, nor will any occur immediately after the execution and delivery of this Amendment or by the performance or observance of any provision hereof; (e) each of the representations and warranties contained in the Loan Documents is true and correct in all material respects as of the date hereof as if made on the date hereof, except to the extent that any such representation or warranty expressly states that it relates to an earlier date (in which case such representation or warranty is true and correct in all material respects as of such earlier date); (f) Borrowers are not aware of any claim or offset against, or defense or counterclaim to, Borrowers’ obligations or liabilities under the Credit Agreement or any Related Writing; and (g) this Amendment constitutes a valid and binding obligation of Borrowers in every respect, enforceable in accordance with its terms.

     10. Waiver and Release. Borrowers, by signing below, hereby waive and release Agent and each of the Lenders, and their respective directors, officers, employees, attorneys, affiliates and subsidiaries, from any and all claims, offsets, defenses and counterclaims of which Borrowers are aware, such waiver and release being with full knowledge and understanding of the circumstances and effect thereof and after having consulted legal counsel with respect thereto.

     11. References to Credit Agreement and Ratification. Each reference to the Credit Agreement that is made in the Credit Agreement or any other Related Writing shall hereafter be construed as a reference to the Credit Agreement as amended hereby. Except as herein otherwise specifically provided, all terms and provisions of the Credit Agreement are confirmed and ratified and shall remain in full force and effect and be unaffected hereby. This Amendment is a Loan Document.

     12. Counterparts. This Amendment may be executed in any number of counterparts, by different parties hereto in separate counterparts and by facsimile signature, each of which, when so executed and delivered, shall be deemed to be an original and all of which taken together shall constitute but one and the same agreement.

     13. Headings. The headings, captions and arrangements used in this Amendment are for convenience only and shall not affect the interpretation of this Amendment.

     14. Severability. Any term or provision of this Amendment held by a court of competent jurisdiction to be invalid or unenforceable shall not impair or invalidate the remainder of this Amendment and the effect thereof shall be confined to the term or provision so held to be invalid or unenforceable.

     15. Governing Law. The rights and obligations of all parties hereto shall be governed by the laws of the State of New York, without regard to principles of conflicts of laws.

[Remainder of page intentionally left blank.]

     JURY TRIAL WAIVER. EACH PARTY HERETO HEREBY IRREVOCABLY WAIVES, TO THE FULLEST EXTENT PERMITTED BY APPLICABLE LAW, ANY RIGHT IT MAY HAVE TO A TRIAL BY JURY IN ANY LEGAL PROCEEDING DIRECTLY OR INDIRECTLY ARISING OUT OF OR RELATING TO THIS AGREEMENT OR ANY OTHER LOAN DOCUMENT OR THE TRANSACTIONS CONTEMPLATED HEREBY OR THEREBY (WHETHER BASED ON CONTRACT, TORT OR ANY OTHER THEORY). EACH PARTY HERETO (A) CERTIFIES THAT NO REPRESENTATIVE, AGENT OR ATTORNEY OF ANY OTHER PERSON HAS REPRESENTED, EXPRESSLY OR OTHERWISE, THAT SUCH OTHER PERSON WOULD NOT, IN THE EVENT OF LITIGATION, SEEK TO ENFORCE THE FOREGOING WAIVER AND (B) ACKNOWLEDGES THAT IT AND THE OTHER PARTIES HERETO HAVE BEEN INDUCED TO ENTER INTO THIS AGREEMENT AND THE OTHER LOAN DOCUMENTS BY, AMONG OTHER THINGS, THE MUTUAL WAIVERS AND CERTIFICATIONS IN THIS SECTION.

     IN WITNESS WHEREOF, the parties have executed and delivered this Amendment as of the date first set forth above.

Signature Page 1 of 3 to
Third Amendment Agreement

Signature Page 2 of 3 to
Third Amendment Agreement

Signature Page 3 of 3 to
Third Amendment Agreement

GUARANTOR ACKNOWLEDGMENT AND AGREEMENT

     The undersigned consent and agree to and acknowledge the terms of the foregoing Third Amendment Agreement, dated as of April 1, 2011. The undersigned further agree that the obligations of the undersigned pursuant to the Guaranty of Payment executed by the undersigned are hereby ratified and shall remain in full force and effect and be unaffected hereby.

     The undersigned hereby waive and release Agent and the Lenders and their respective directors, officers, employees, attorneys, affiliates and subsidiaries from any and all claims, offsets, defenses and counterclaims of any kind or nature, absolute and contingent, of which the undersigned are aware or should be aware, such waiver and release being with full knowledge and understanding of the circumstances and effect thereof and after having consulted legal counsel with respect thereto.

     JURY TRIAL WAIVER. THE UNDERSIGNED, TO THE EXTENT PERMITTED BY LAW, HEREBY WAIVE ANY RIGHT TO HAVE A JURY PARTICIPATE IN RESOLVING ANY DISPUTE, WHETHER SOUNDING IN CONTRACT, TORT OR OTHERWISE, AMONG BORROWERS, AGENT, THE LENDERS AND THE UNDERSIGNED, OR ANY THEREOF, ARISING OUT OF, IN CONNECTION WITH, RELATED TO, OR INCIDENTAL TO THE RELATIONSHIP ESTABLISHED AMONG THEM IN CONNECTION WITH THIS AMENDMENT OR ANY NOTE OR OTHER INSTRUMENT, DOCUMENT OR AGREEMENT EXECUTED OR DELIVERED IN CONNECTION HEREWITH OR THE TRANSACTIONS RELATED THERETO.

AIR VENT INC.				ALABAMA METAL INDUSTRIES CORPORATION
By:				By:
Name:				Name:
Title:				Title:
APPLETON SUPPLY CO., INC.				CONSTRUCTION METALS, LLC
By:				By:
Name:				Name:
Title:				Title:
DIAMOND PERFORATED METALS, INC.				DRAMEX INTERNATIONAL INC
By:				By:
Name:				Name:
Title:				Title:

FLORENCE CORPORATION				FLORENCE CORPORATION OF KANSAS
By:				By:
Name:				Name:
Title:				Title:
GIBRALTAR INTERNATIONAL, INC.				GIBRALTAR STRIP STEEL, INC.
By:				By:
Name:				Name:
Title:				Title:
NOLL/NORWESCO, LLC				SEA SAFE, INC.
By:				By:
Name:				Name:
Title:				Title:
SOLAR GROUP, INC.				SOLAR OF MICHIGAN, INC.
By:				By:
Name:				Name:
Title:				Title:
SOUTHEASTERN METALS MANUFACTURING COMPANY, INC.
By:
Name:
Title:

SCHEDULE 2

GUARANTORS OF PAYMENT

Air Vent Inc., a Delaware corporation
Alabama Metal Industries Corporation, a Delaware corporation
AMICO Holding Company, Inc., a Delaware corporation
Appleton Supply Co., Inc., a Delaware corporation
Construction Metals, LLC, a California limited liability company
Diamond Perforated Metals, Inc., a California corporation
D.S.B. Holding Corp., a Delaware corporation
The D.S. Brown Company, an Ohio corporation
Florence Corporation, an Illinois corporation
Florence Corporation of Kansas, a Kansas corporation
Gibraltar Strip Steel, Inc., a Delaware corporation
Noll/Norwesco, LLC, a Delaware limited liability company
Sea Safe, Inc., a Louisiana corporation
Solar Group, Inc., a Delaware corporation
Solar of Michigan, Inc., a Delaware corporation
Southeastern Metals Manufacturing Company, Inc., a Florida corporation

SCHEDULE 3

BORROWING BASE COMPANIES

Air Vent, Inc.
Alabama Metal Industries Corporation
AMICO Holding Company, Inc.
Appleton Supply Company, Inc.
Construction Metals, LLC
Diamond Perforated Metals, Inc.
D.S.B. Holding Corp.
The D.S. Brown Company
Florence Corporation
Gibraltar Strip Steel, Inc.
Noll/Norwesco, LLC
Sea Safe, Inc.
Solar Group, Inc.
Southeastern Metals Manufacturing Company, Inc.

SCHEDULE 4

REAL PROPERTY

The following parcels of real property owned by the Borrowers and/or the Subsidiaries that are subject to a Deed of Trust as required pursuant to the terms of the Agreement:

(a)		3011 70th Avenue East, Fife Washington 98424
(b)		1320 Performance Drive, Stockton, California 95206
(c)		107 Fellowship Road, Taylorville, Mississippi 39168

SCHEDULE 5

PLEDGED SECURITIES

				Total
				Shares/Equity				Ownership
				Interests				Percentage				Certificate No.				% of Interest
Credit Party		Issuer		Outstanding				of the Pledgor				(if any)				Pledged
Gibraltar Steel Corporation of New York		Air Vent Inc.			249				100	%			7				100	%
Gibraltar Steel Corporation of New York		Solar of Michigan, Inc.			100				100	%			1				100	%
Gibraltar Steel Corporation of New York		Southeastern Metals Manufacturing Company, Inc.			252,021.7891				100	%			217				100	%
Gibraltar Steel Corporation of New York		Gibraltar Strip Steel, Inc.		5 shares of Class A					100	%			21				100	%
				5 shares of Class B									22
Gibraltar Steel Corporation of New York		GSC Flight Services Corp.		100 shares					100	%			1				100	%
Gibraltar Industries, Inc.		Appleton Supply Co., Inc.			1,000				100	%			1				100	%
Gibraltar Industries, Inc.		Florence Corporation			2,440				100	%			182				100	%
Gibraltar Industries, Inc.		Gibraltar Steel Corporation of New York			101				100	%			C-24				100	%
Gibraltar Industries, Inc.		Solar Group, Inc.			1,000				100	%			1				100	%

				Total
				Shares/Equity				Ownership
				Interests				Percentage				Certificate No.				% of Interest
Credit Party		Issuer		Outstanding				of the Pledgor				(if any)				Pledged
Gibraltar Industries, Inc.		Gibraltar Industries Germany GmbH**		€	25,000				100	%		None					*
Gibraltar Industries, Inc.		Gibraltar Industries (UK) Limited**		1 Ordinary Share					100	%			2				*
Gibraltar Industries, Inc.		AMICO Holding Company, Inc.			500				100	%			1				100	%
Gibraltar Industries, Inc.		D.S. B. Holding Corp.		66,749.90 Common					100	%			10				100	%
				65,750.10 Preferred								P-10
D.S. B. Holding Corp.		The D.S. Brown Company			1,000				100	%			1				100	%
AMICO Holding Company, Inc.		Alabama Metal Industries Corporation			110				100	%		28 and 29					100	%
Member: Southeastern Metals Manufacturing Company, Inc.		Construction Metals, LLC			100	%			100	%		None					100	%
Member: Southeastern Metals Manufacturing Company, Inc.		Noll/Norwesco, LLC			100	%			100	%			1				100	%
Alabama Metal Industries Corporation		Diamond Perforated Metals, Inc.			1,000,000				100	%			7				100	%
Alabama Metal Industries Corporation		Sea Safe, Inc.		15,008 Common Stock					100	%			56				100	%

Total

Shares/Equity

Ownership

Interests

Percentage

Certificate No.

% of Interest

Credit Party

Issuer

Outstanding

of the Pledgor

(if any)

Pledged

Alabama Metal Industries Corporation

AMICO Canada, Inc.**

1,750,000

100

%

C-1

*

Florence Corporation

Florence Corporation of Kansas

2,490

100

%

1

100

%

SCHEDULE 6.1

CORPORATE EXISTENCE; SUBSIDIARIES; FOREIGN QUALIFICATIONS

1. The following list identifies the jurisdiction of organization/formation and each jurisdiction in which any Company is qualified to do business:

		Jurisdiction of		Jurisdictions
		Organization/		Where Entity is Qualified
Company		Formation		to Do Business
Air Vent Inc.		Delaware		Illinois Iowa Massachusetts Mississippi Missouri North Carolina Texas
Alabama Metal Industries Corporation		Delaware		Alabama California Colorado Florida Illinois Louisiana Mississippi Missouri Ohio South Carolina Texas Utah Washington
AMICO Holding Company, Inc.		Delaware		None
Appleton Supply Co., Inc.		Delaware		Michigan Wisconsin

		Jurisdiction of		Jurisdictions
		Organization/		Where Entity is Qualified
Company		Formation		to Do Business
Construction Metals, LLC		California		Arizona Colorado Utah Washington
Diamond Perforated Metals, Inc.		California		None
D.S.B. Holding Corp.		Delaware		None
The D.S. Brown Company		Ohio		California Georgia Michigan Minnesota New Jersey Ohio Pennsylvania Texas
Florence Corporation		Illinois		None
Florence Corporation of Kansas		Kansas		Utah
Gibraltar Industries, Inc.		Delaware		New York
Gibraltar Steel Corporation of New York		New York		Georgia Michigan Ohio Texas
Gibraltar Strip Steel, Inc.*		Delaware		New York Ohio Texas***

		Jurisdiction of		Jurisdictions
		Organization/		Where Entity is Qualified
Company		Formation		to Do Business
Noll/Norwesco, LLC		Delaware		California Georgia Oregon Washington Utah
Sea Safe, Inc.		Louisiana		Illinois Texas
Solar Group, Inc.		Delaware		Mississippi Texas North Carolina
Solar of Michigan, Inc.		Delaware		Michigan
Southeastern Metals Manufacturing Company, Inc.		Florida		New Mexico Texas
GSC Flight Services Corp.*		New York		None
Gibraltar Industries Germany GmbH**		Germany		None
Gibraltar Industries (UK) Limited**		United Kingdom		None
AMICO Canada, Inc.**		Canada		British Columbia Ontario Quebec
Dramex Expanded Metal Limited**		United Kingdom		None
Expamet Polska sp.zo.o**		Poland		None
Sorst Streckmetall GmbH**		Germany		None
The Expanded Metal Company Limited**		United Kingdom		None

2. The following Subsidiaries are wholly-owned directly by Gibraltar Steel Corporation of New York which, in turn, is wholly-owned by Gibraltar Industries, Inc.:

Air Vent Inc.
Gibraltar Strip Steel, Inc.*
GSC Flight Services Corp.*
Solar of Michigan, Inc.*
Southeastern Metals Manufacturing Company, Inc.

3. The following Subsidiaries are directly and wholly-owned by Gibraltar Industries, Inc.

Gibraltar Steel Corporation of New York
AMICO Holding Company, Inc.
Appleton Supply Co., Inc.
Gibraltar Industries Germany GmbH**
Gibraltar Industries (UK) Limited**
D.S.B. Holding Corp.
Florence Corporation
Solar Group, Inc.

4. The following Subsidiaries are wholly-owned directly by Alabama Metal Industries Corporation which, in turn, is wholly-owned by AMICO Holding Company, Inc., which is wholly owned by Gibraltar Industries, Inc.:

AMICO Canada, Inc.**
Diamond Perforated Metals, Inc.
Sea Safe, Inc.

5. The remainder of the Subsidiaries are owned as follows:

				Indirect
Subsidiary		Direct Ownership		Ownership
Alabama Metal Industries Corporation		AMICO Holding Company, Inc. — 100%		GII — 100%
Construction Metals LLC		Southeastern Metals Manufacturing Company, Inc. — 100%		GSCNY — 100%
The D.S. Brown Company		D.S.B. Holding Corp.		GII — 100%
Dramex Expanded Metal Limited**		Gibraltar Industries (UK) Limited** — 100%		GII — 100%
Expamet Polska sp.zo.o**		The Expanded Metal Company Limited** — 100%		GII — 100%
Florence Corporation of Kansas		Florence Corporation — 100%		GII — 100%

				Indirect
Subsidiary		Direct Ownership		Ownership
Noll/Norwesco, LLC		Southeastern Metals Manufacturing Company, Inc. — 100%		GSCNY — 100%
Sorst Streckmetall GmbH**		Gibraltar Industries Germany GmbH** — 100%		GII — 100%
The Expanded Metal Company Limited**		Gibraltar Industries (UK) Limited** — 100%		GII — 100%

6. The principal place of business and the chief executive office for the Borrowers, each Subsidiary Guarantor and each Foreign Subsidiary is 3556 Lake Shore Road Buffalo, New York 14219.

SCHEDULE 6.9

LOCATIONS

1.		See attached list for locations currently leased and/or owned by a Credit Party, where inventory is currently located.
2.		The following list provides for third-party locations where inventory is currently held:

						Description of
						Assets and Nature of
Credit Party		Name of Third Party		Address		Relationship
Air Vent, Inc.		Reliable Consolidation		415 N Blooming Street Lowel, AR 72745		Inventory warehouse*
Air Vent, Inc.		Environmental Friendly		1833 N I-35E Dallas, Texas 75006		Outside processor*
Air Vent, Inc.		Pellams Warehouse		917 Parkway Grand Prairie, TX 75051		Inventory warehouse*
Air Vent, Inc.		Custom Mfg. Co.		5501 S Lamar Dallas, TX 75215		Outside processor*
Solar Group, Inc		Boswell Retardation Center		P.O. Box 128 Magge, MS 39111		Outside processor*
Solar Group, Inc		Pine Belt Industries		5370 Highway 42 Hattiesburg, MS 39401		Outside processor*
Solar Group, Inc		Pro Pak		2010 South Great Southwest Parkway Grand Prairie, Texas 75051.		Outside processor*
Florence Corporation		Van Am Tool & Engineering		5025 Easion Road St. Joseph, MO 64507		Outside processor*
Florence Corporation		Bennet Packaging		220 N.W Space Center Rd Lee’s Summit, MO 64064		Outside processor*
Florence Corporation		Stemar Industries		116 Kean Street W Bablyon, NY 11704		Outside processor*
Florence Corporation		A&E Custom Manufacturing		3150 Chrysler Road Kansas City, KS 66115		Outside processor*
Florence Corporation		BMS Logistics		3601 S Leonard Rd St. Joseph, MO 64503		Outside processor*

						Description of
						Assets and Nature of
Credit Party		Name of Third Party		Address		Relationship
Southeastern Metals Manufacturing Company, Inc.		Coilplus-Texas		6610 Railway San Antonio, Texas 78244		Outside processor
(under the assumed name DOT Metal Products, Inc.)
Southeastern Metals Manufacturing Company, Inc.		PreCoat		16402 Jacinto Port Blvd Houston, TX 77015		Outside processor*
(under the assumed name DOT Metal Products, Inc.)
Southeastern Metals Manufacturing Company, Inc.		Curtis Steel		6504 Hurst Houston, TX 77088		Outside processor*
(under the assumed name DOT Metal Products, Inc.)
Appleton Supply Company, Inc		Wismarq		11440 W. Addison Ave Franklin Park, IL 60131		Outside processor*
Southeastern Metals Manufacturing Company, Inc.		Toll/Pride		13518 NE 258th Street Rayford, FL 32083		Outside processor*
Southeastern Metals Manufacturing Company, Inc.		PreCoat		3399 Davey Allison Blvd Hueytown, AL 35023		Outside processor*

						Description of
						Assets and Nature of
Credit Party		Name of Third Party		Address		Relationship
Southeastern Metals Manufacturing Company, Inc.		Lomb		250 Louisville Road Savannah, Georgia 31322		Outside processor*
Southeastern Metals Manufacturing Company, Inc.		Magic Steel		408 Mareo St. NW Decatur, FL 35603		Outside processor*
Southeastern Metals Manufacturing Company, Inc.		JIT		216 E. Lathop Avenue Savannah, Georgia 31402		Outside processor*
Alabama Metal Industries Corporation		Marleau Hercules		4333 N. Detroit Ave Toledo, OH 43612		Outside processor*
Alabama Metal Industries Corporation		Metalplate Galvanizing		1120 39th Street Birmingham, AL 35234		Outside processor*
Alabama Metal Industries Corporation		Ferraloy		1425 Red Hat Rd Decatur, AL 35601		Outside processor*
Alabama Metal Industries Corporation		B.L. Downey		2125 Gardner Rd Broadview, IL 60155		Outside processor*
Alabama Metal Industries Corporation		Ferraloy		1435 Red Hat Rd Decatur, AL 35601		Outside processor*
Alabama Metal Industries Corporation		AAA Galvanizing		625 Mills Rd Joilet, IL 60434		Outside processor*
Alabama Metal Industries Corporation		Metalplate Galvanizing-Deyton		10635 Needham Street Houston, TX 77013		Outside processor*
Alabama Metal Industries Corporation		Marantha Machine		128 W. Fm 6 Nevada, TX 75173		Outside processor*

						Description of
						Assets and Nature of
Credit Party		Name of Third Party		Address		Relationship
Alabama Metal Industries Corporation		Hobson Galvanizing		2402 Engineering Rd Belle Chase, LA 70037		Outside processor*
Alabama Metal Industries Corporation		Aztec Galvanizing		P.O. Box 64 Crowley, Texas 76036		Outside processor*
Alabama Metal Industries Corporation		Vas Delaware Galvanizing		511 Carrol Drive New Castle Delaware 19720		Outside processor*
Diamond Perforated Metals, Inc.		Drexel Supply Co.		10361 E 106 Ave Henderson, CO 80601		Public warehouse*

3. Each Credit Party’s chief executive office is located at 3556 Lake Shore Road Buffalo, New York 14219.

SCHEDULE 6.9

Gibraltar Strip Steel Locations

Business Unit

Physical Address

City

State

ZIP Code

Gibraltar Strip Steel

2555 and 2545 Walden Ave.

Buffalo

New York

14225

Owned

Storage & Ventilation Locations

Business Unit

Physical Address

City

State

ZIP Code

Air Vent

7700 Harker Drive Suite A

Peoria

Illinois

61615

Leased

*

Air Vent

418 N. Front Street

Orrick

Missouri

64077

Owned

Air Vent

1710 South 21st Street

Clinton

Iowa

52732

Owned

Air Vent

4117 Pinnacle Point Dr.

Dallas

Texas

75211

Leased

*

SOLAR

107 Fellowship Road

Taylorsville

Mississippi

39168

Owned

SOLAR

203 Fellowship Road

Taylorsville

Mississippi

39168

Owned

Engineered Products Locations

Business Unit

Physical Address

City

State

ZIP Code

Florence

5935 Corporate Drive

Manhattan

Kansas

66503

(IRB Bond)

Florence

2321 N. Jackson

Junction City

Kansas

66441

Leased

*

AMICO Locations

Business Unit

Physical Address

City

State

ZIP Code

AMICO

3240 & 3245 Fayette Avenue

Birmingham

Alabama

35208

Owned

AMICO

11093 Beach Avenue

Fontana

California

92335

Owned

AMICO

7300 W. Sunnyview Avenue

Visalia

California

93291

Owned

AMICO

913-915 S. Heald Street

Wilmington

Delaware

19806

Leased

*

AMICO

1033 Pine Chase Avenue

Lakeland

Florida

33801

Owned

AMICO

1115 E. 5000 North Road

Bourbonnais

Illinois

60914

Leased

*

AMICO

209 Glaser Drive

Lafayette

Louisiana

70508

Owned

AMICO

1427 Howell Street

North Kansas City

Missouri

64068

Leased

*

AMICO

8110 Southern Boulevard

Youngstown

Ohio

44512

Owned

AMICO

1520 Roper Mountain Road

Greenville

South Carolina

29615

Leased

*

AMICO

825 County Road 606

Dayton

Texas

77535

Owned

AMICO

120 North Latham

Houston

Texas

77011

Leased

*

AMICO

212 North 1330 West Street

Orem

Utah

84059

Owned

AMICO

22153 West Valley Highway

Kent

Washington

98032

Leased

*

Noll Group Locations

Business Unit

Physical Address

City

State

ZIP Code

CMI

13169-B Slover Avenue

Fontana

California

92337

Leased

*

CMI

3011 70th Avenue E.

Fife

Washington

98424

Owned

CMI

1320 Performance Drive

Stockton

California

95206

Owned

SCHEDULE 6.9

Business Unit

Physical Address

City

State

ZIP Code

CMI

985 West 3160 South

Salt Lake City

Utah

84123

Leased

*

Central Valley Industrial Park

CMI

4900 Moline Street

Denver

Colorado

80239

Leased from K & W

**

Metal Fabricators, LLC

Noll/Norwesco

3011 70th Avenue E.

Fife

Washington

98424

Owned

Noll/Norwesco

1320 Performance Drive

Stockton

California

95206

Owned

Noll/Norwesco

38 SE 97th Avenue

Portland

Oregon

97216

Owned

K & W

13169-B Slover Avenue

Fontana

California

92337

Leased

**

K & W (lease is in

4850 Moline Street

Denver

Colorado

80239

Leased

*

the name of Gibraltar Industries, Inc.)

Appleton

1905 West Haskell Street

Appleton

Wisconsin

54914

Owned

Appleton

927 South Grider Street

Appleton

Wisconsin

54914

Owned

SEMCO

11801 Industry Drive

Jacksonville

Florida

32218

Leased

*

SEMCO

3004 - B Aldine Bender, RR 1

Houston

Texas

77032

Leased

*

SEMCO

18757 Bracken Drive

San Antonio

Texas

78266

Leased

***

Brown Locations

Business Unit

Physical Address

City

State

ZIP Code

The D.S. Brown Company

300 East Cherry Street

North Baltimore

Ohio

45872

Owned

SCHEDULE 6.17

INTELLECTUAL PROPERTY

1 See attached list of Copyrights

2 See attached list of Trademarks

3 See attached list of Patents

Copyright Claimant		Reg. #		Date Reg.		Title		Description
Air Vent Inc.		TX 131-073		7/24/1978		Principles of Attic Ventilation		24 pgs
Solar Group, Inc.		TX 5-186-529		4/30/2000		Olde Towne Collection		2 pgs
Solar Group, Inc.		TXU 976-824		11/27/2000		Premium Mailbox Post: The Estate ES200 Black		poster
Solar Group, Inc.		TXU 977-296		11/27/2000		Premium Mailbox Post: The Estate Series ES200 White		poster
Solar Group, Inc.		TXU 980-800		12/4/2000		Premium Mailbox: Estate Series E15 Premium Aluminum Mailbox Post		poster
Solar Group, Inc.		TXU 980-912		11/27/2000		Premium Mailbox: Estate Series E15 Black		poster
Solar Group, Inc.		TXU 983-179		11/28/2000		Premium Mailbox (Estate Series E15 White)		poster
Solar Group, Inc.		V3412D855		3/13/1998		Centrury Classic 2000 Mailbox & 1 Other Title (Century Classic 2000 3-D artwork)		n/a
Solar Group, Inc.		VA 1-038-133		3/27/2000		Olde Towne Collection Post Assembly		mailbox support post
Solar Group, Inc.		VA 1-041-820		3/27/2000		Olde Towne Collection Vertical Mailbox		n/a
Solar Group, Inc.		VA 1-041-830		3/27/2000		Olde Towne Collection Horizontal Mailbox		n/a
Solar Group, Inc.		VAU 462-933		5/28/1999		Cast Aluminum Horizontal Citibox		technical drawing
Solar Group, Inc.		VAU 469-000		5/14/1999		Cast Aluminum Vertical Citibox		technical drawing

Air Vent Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

AV (stylized)

Registered

12/8/1981

1,180,817

73/258,601

USA

IC 006

Metal roof ventilators

FILTERVENT

FILTERVENT

Registered

6/5/1990

1,599,621

73/838,041

USA

IC 019

Unitary fabricated roof ridge ventilators without moving parts

FILTERVENT

FILTERVENT

Registered

12/4/2007

3,348,074

78/549,016

USA

IC 019

Non-metallic unitary fabricated roof ridge ventilators without moving parts

PEAKPERFORMER (and design)

Registered

4/24/2007

3,234,789

78/617,180

USA

IC 019

Non-mechanical plastic roof ridge vent for ventilating attics

SHINGLEVENT

SHINGLEVENT

Registered

6/18/1991

1,648,162

73/834,918

USA

IC 019

Unitary fabricated roof ridge ventilators without moving parts and installation parts sold as a unit

SOLAR TEK (and design)

Registered

3/24/1987

1,433,735

73/607,334

USA

IC 011

Automatic foundation ventilator

SOLARCOOL (and design)

Registered

11/1/2005

3,011,981

78/242,018

USA

IC 006

Solar powered roof and attic vent

TEMP-VENT (and design)

Registered

1/27/1976

1,031,384

73/049,505

USA

IC 011

Automatic foundation ventilators

Air Vent Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

THE EDGE

THE EDGE

Registered

11/11/2008

3,531,951

77/239,648

USA

IC 019

Plastic attic roof intake vents for ventilation purposes

VENTURIVENT

VENTURIVENT

Registered

7/3/1990

1,604,349

73/835,541

USA

IC 006

Unitary fabricated roof rigdge ventilators without moving parts made primarily of metal

Alabama Metal Industries Corporation
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

AMICO

AMICO

Registered

9/5/1995

1,915,974

74/532,835

USA

IC 006 IC 019

Structural and ornamental metal grating; metal laths, metal lathing accessories, namely expansion joints, control joints, corner beads, casing beads, and cold rolled channels for drywall studs and runner track; metal enclosure systems comprising expanded metal panels posts, doors and hardware for their installation; metal fencing systems comprising expanded metal fence sections, posts, fittings, rails and gates; and expanded metal forms

AMICO (and design)

Registered

8/22/1995

1,912,984

74/532,836

USA

IC 006 IC 019

Structural and ornamental metal grating; metal laths and metal lathing accessories, namely expansion joints, control joints, corner beads, casing beads and cold rolled metal channels for drywall studs and runner tracks; metal enclosure systems comprising expanded metal panels, posts, doors and hardware for their installation; metal fencing systems comprising expanded metal fence sections, posts, fittings, rails and gates; and expanded metal forms

ANC

ANC

Registered

12/11/2007

3,351,722

77/143,724

USA

IC 019

Non-metal fencing and accessories therefor, namely, panels, posts, fittings and fasteners

DIAMOND GRIP

DIAMOND GRIP

Registered

9/15/1998

2,189,215

75/318,925

USA

IC 006

Metal industrial safety grating

GMS GENESIS (and design)

Registered

2/25/1997

2,063,254

75/119,091

USA

IC 006

Raised metal access flooring

ORNAMESH

ORNAMESH

Registered

6/27/1995

1,901,456

74/532,516

USA

IC 006

Ornamental metal gratings

SAFETY GRIP

SAFETY GRIP

Registered

4/4/2000

2,337,053

75/330,898

USA

IC 006

Metal flooring

SECURA FENCE SYSTEM

SECURA FENCE SYSTEM

Registered

7/11/1995

1,904,092

74/533,654

USA

IC 006

Metal fencing system consisting of expanded metal fence sections, posts, fittings, rails and gates

SECURA LATH

SECURA LATH

Registered

9/26/1995

1,921,479

74/575,870

USA

IC 006

Metal lathing

Alabama Metal Industries Corporation
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

SECURA MESH

SECURA MESH

Registered

7/11/1995

1,904,088

74/532,515

USA

IC 006

Metal partitions and enclosure systems of expanded metal comprising expanded metal sections, posts, doors and hardware

SHOT-FORM

SHOT-FORM

Registered

5/20/2003

2,717,837

76/167,444

USA

IC 006

Metal casting forms for concrete

STAY-FORM

STAY-FORM

Registered

6/20/1995

1,900,341

74/532,517

USA

IC 006

Expanded metal concrete forms

ZIP STRIP

ZIP STRIP

Registered

8/8/1995

1,910,087

74/532,798

USA

IC 019

Vinyl trim stop for drywall, stucco and veneer applications

GATOR-GRATE (and design)

Registered

2/12/1985

1,319,387

73/445,594

USA

IC 019

Fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications, all sold as a unit; custom manufacture of fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications

KORDEK

KORDEK

Registered

7/24/1979

1,122,786

73/169,918

USA

IC 019

Fiberglass reinforced molded resin walking and catwalk grating

Appleton Supply Company, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

APPLETON BUILDING PRODUCTS (and design)

Registered

7/24/2007

3,270,024

78/745,852

USA

IC 006

Metal building products; namely, flashings, roof edgings, wind braces, gravel stops, ridge rolls, gutter aprons, hardboard siding corners, brick molding covers, H molding joint covers, J channel, roll aluminum and roll steel, brick bonds, flashing shingles, starter strips, drywall corner beads, soffit panels, soffit trim and fascia

AS (and design)

Registered

12/29/1992

1,759,443

74/230,736

USA

IC 006

Metal building products; namely, flashings, roof edgings, wind braces, gravel stops, ridge rolls, gutter aprons, hardboard siding corners, brick molding covers, H molding joint covers, roll aluminum and roll steel, brick bonds, flashing shingles, starter strips and drywall corner beads

SELL-EVEN BUILDING PRODUCTS

SELL-EVEN BUILDING PRODUCTS

Registered

10/6/1992

1,721,382

74/230,245

USA

IC 006

Metal building products; namely, soffits, siding, gutters and coiled aluminum sold in bulk

SELL-EVEN BUILDING PRODUCTS (and design)

Registered

10/6/1992

1,721,386

74/230,951

USA

IC 006

Metal building products; namely, soffits, siding, gutters and coiled aluminum sold in bulk

The D.S. Brown Company, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

DELCRETE

DELCRETE

Registered

1/3/1989

1,518,915

73733176

USA

IC 019

Elastomeric concrete for construction of pavement joints.

DELCRETE

DELECREETE

Registered

2/11/1993

440,290

n/a

Mexico

IC 019

Concreto Elastomerico para de uniones de pavimento

STEELFLEX

STEELFLEX

Registered

5/20/1997

2,062,964

75082004

USA

IC 006

Strip seal expansion joint systems composed of steel profiles, reinforcing steel, steel anchors and neoprene glands, sold as a unit.

DELASTIC

DELASTIC

Registered

10/14/1997

2,104,782

75/082,079

USA

IC 017

Preformed elastomeric compression sealing strips for concrete pavement.

EXODERMIC

EXODERMIC

Registered

8/5/2003

2,747,531

75/642,180

USA

IC 42

CONSULTATION AND PROVIDING INFORMATION RELATED TO COMPOSITE BRIDGE DECKS COMPRISED OF UNFILLED GRID AND STRUCTURAL SLAB.

EXODERMIC

EXODERMIC

Registered

8/31/2004

2,879,486

78/281,391

USA

IC 019

composite bridge decks comprised of unfilled grids and structural slabs, composed primarily of concrete and other non-metal compositions.

DELASTIC-LS

Registered

7/13/2010

3,816,291

77/657,458

USA

IC 017

Two-part urethane sealant and primer, sold together as a unit, for use on engineered joints on bridges and roads.

The D.S. Brown Company, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

TRANSPATCH

Pending

n/a

n/a

77/581,316

USA

IC 019

Concrete and asphalt pavement repair material, namely, tar-based concrete and asphalt patching compound.

MATRIX PREMIX

Pending

n/a

n/a

77/696,995

USA

IC 019

Pre-packaged bridge expansion joint filler.

Gibraltar Industries, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

WEATHER-VENT

WEATHER-VENT

Registered

5/31/2005

2,956,738

76/581,717

USA

IC 006

Metal vents to be used on roofs

Noll/Norwesco, LLC
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

025

025

Registered

9/19/1961

0,721,610

72/097,234

USA

IC 011

Cap assemblies for gas vents

GENERAL METALCRAFT PRODUCTS (and design)

Registered

1/11/2000

2,307,147

75/502,001

USA

IC 006

Metal building products, namely, gutters, downspouts, flashings, roof vents, and HVAC ducting

M&N PLASTICS

M&N PLASTICS

Registered

12/26/2006

3,188,869

78/652,448

USA

IC 019

Fabricated plastic products, namely area wells for building ventilation, vents for buildings, namely cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents.

NOLL

NOLL

Registered

9/19/1961

0,721,611

72/097,235

USA

IC 011

Cap assemblies for gas vents

NORWESCO

NORWESCO

Registered

10/5/1965

0,796,980

72/202,117

USA

IC 021

Fabricated metal products, namely, pails, tubs, garbage cans, mailboxes, and sprinkling cans.

NORWESCO

NORWESCO

Registered

9/7/1965

0,795,437

72/202,118

USA

IC 006 IC 017 IC 019

Fabricated metal products namely, downspouts, gutters, roof ventilators, shower stalls, and window wells.

NORWESCO

NORWESCO

Registered

9/7/1965

0,795,498

72/202,119

USA

IC 012

Wheelbarrows

Noll/Norwesco, LLC
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

NORWESCO

NORWESCO

Registered

11/28/2006

3,176,210

78/616,966

USA

IC 006 IC 012 IC 019 IC 021

Fabricated metal products, namely, mail boxes, downspouts, gutters, roof vents for ventilation, window wells, metal HVAC pipe and ducts, namely pipes, ducts, adjustable angles, boots, boxes, caps, collars, elbows, filter slides, increasers, plugs, reducers, saddles, spin-ins, stands, tees, and wyes for HVAC ducts; Wheelbarrows; Fabricated plastic products, namely, area wells for building ventilation, vents for buildings, namely, cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents; Fabricated metal products, namely, pails, water tubs, garbage cans, and watering cans.

VENT AIR

VENT AIR

Registered

12/5/2006

3,179,511

78/617,039

USA

IC 019 IC 020

Fabricated plastic products for use in household construction, namely, cap vent covers, foundation vent covers, gable vent covers, ridge vent covers, roof vent covers, soffit vent covers, and stem vent covers for roof, wall, and building foundations; Fabricated plastic products for use in household construction, namely, non-metal ventilating ducts utilizing end cap vents, foundation vents, gable vents, ridge vents, roof vents, soffit vents, and stem vents.

Sea Safe, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

SEASAFE (and design)

Registered

4/3/2001

2,439,864

75/562,870

USA

IC 019

Fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications, all sold as a unit; custom manufacture of fiber and resin molded trays, gratings and structural shapes for use in industrial and commercial applications

Solar Group, Inc.
Trademarks

Registration

Registration

Application

Mark

Image

Status

Date

Number

Number

Country

Class

Goods or Services

AIRHAWK

AIRHAWK

Registered

4/11/1995

1,889,235

74/447,442

USA

IC 011

Roof ventilators, louver-type ventilators, foundation vents and roof and attic fans for residential and commercial use

ARTCRAFT

ARTCRAFT

Registered

6/6/2006

3,100,404

78/593,252

USA

IC 006

Mailboxes, mailbox support posts and bases, newspaper boxes, and decorative finials, post caps, and mounting brackets for the above, all made primarily of metal; street signs, street sign support posts, street sign brackets, all made primarily of metal

COUNTRY IMAGE (stylized)

Registered

4/4/1989

1,532,660

73/752,200

USA

IC 006

Decorated metal rural boxes

EASY UP (and design)

Registered

10/8/1996

2,006,214

75/013,693

USA

IC 006 IC 011 IC 020

Metal goods, namely drive-in post anchors, T-bracing and flat wall bracing, door viewers and knockers, door finger pulls, door stops, handrail brackets, cabinet catches, metal closet rods, sash locks, sash lifts, closet hinges, metal rod chairs for supporting reinforcing bars used in concrete construction, soffit ventilators, house numbers, metal mailboxes, mailbox post mounts, mailbox post supports, mail slots, mailbox mounting hardware, namely metal mounting brackets, screws and bolts; metal static roof vents, metal ridge vents, metal ventilating lovers, soffit strips, foundation vents; Turbine ventilators and powered ventilators for domestic use; Non-metal mailboxes, non-metal mailbox house mounts, non-metal house numbers, non-metal house number supports, non-metal mailbox flags, non-metal wall bumpers, non-metal roof vents, non-metal ridge vents, non-metal storage hooks

HANG STUFF (and design)

Registered

9/9/1980

1,139,387

73/205,314

USA

IC 006

Wall mounted adjustable tool holders made of metal