Attached files

file filename
EX-32.2 - CERTIFICATION - FOCUS UNIVERSAL INC.focus_10q-ex3202.htm
EX-32.1 - CERTIFICATION - FOCUS UNIVERSAL INC.focus_10q-ex3201.htm
EX-31.2 - CERTIFICATION PURSUANT TO SECTION 302 - FOCUS UNIVERSAL INC.focus_10q-ex3102.htm
EX-31.1 - CERTIFICATION PURSUANT TO SECTION 302 - FOCUS UNIVERSAL INC.focus_10q-ex3101.htm

Table of Contents

 

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-Q

 

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

 

For the Quarterly period ended March 31, 2021

 

o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE

SECURITIES EXCHANGE ACT OF 1934

 

Commission File No. 000-55247

 

FOCUS UNIVERSAL INC.

(Exact Name of Small Business Issuer as specified in its charter)

 

Nevada 46-3355876
(State or other jurisdiction (IRS Employer File Number)
of incorporation)  

 

20511 E. Locust St., Ontario, CA 91761
(Address of principal executive offices) (zip code)

 

(626) 272-3883

(Registrant's telephone number, including area code)

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class Trading Symbol(s) Name of each exchange on which registered
N/A N/A N/A

 

Securities registered pursuant to Section 12(g) of the Act: None

 

Indicate by check mark whether the registrant: (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports); and (2) has been subject to such filing requirements for the past 90 days.    Yes  x  No o

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (Section 232.405 of this chapter) during the preceding 12 months (or such shorter period that the registrant was required to submit such files. Yes o  No  x

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer o Accelerated filer o
Non-accelerated filer  o Smaller reporting company  x
Emerging growth company x  

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act) Yes o    No x

 

As of May 10, 2021, registrant had 40,959,741 shares outstanding of the registrant's common stock at a par value of $0.001 per share.

 

 

   

 

 

FORM 10-Q

 

FOCUS UNIVERSAL INC.

 

TABLE OF CONTENTS

 

PART I FINANCIAL INFORMATION 3
   
Item 1. Condensed Consolidated Financial Statements (Unaudited) 3
   
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations 4
   
Item 3. Quantitative and Qualitative Disclosures About Market Risk 14
   
Item 4. Controls and Procedures 14
   
PART II OTHER INFORMATION 15
   
Item 1. Legal Proceedings 15
   
Item 1A. Risk Factors 15
   
Item 2. Unregistered Sales of Equity Securities and Use of Proceeds 15
   
Item 3. Defaults Upon Senior Securities 15
   
Item 4. Mine Safety Disclosures 15
   
Item 5. Other Information 15
   
Item 6. Exhibits 15
   
Signatures 16

 

 

 2 

 

 

 

PART I.  FINANCIAL INFORMATION

 

References in this document to "us," "we," or "Company" refer to Focus Universal Inc.

 

ITEM 1.  FINANCIAL STATEMENTS

 

FOCUS UNIVERSAL INC.

CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

 

Index to the Financial Statements

 

Contents Page
   
Condensed Consolidated Balance Sheets as of March 31, 2021 (unaudited) and December 31, 2020 F-1
   
Condensed Consolidated Statements of Operations for the Three Months Ended March 31, 2021 and 2020 (unaudited) F-2
   
Condensed Consolidated Statement of Changes in Stockholder’s Equity for the Three Months Ended March 31, 2021 and 2020 (unaudited) F-3
   
Condensed Consolidated Statements of Cash Flows for the Three Months Ended March 31, 2021 and 2020 (unaudited) F-4
   
Notes to the Condensed Consolidated Financial Statements (unaudited) F-5

 

 

 

 

 3 

 

 

FOCUS UNIVERSAL INC.

CONDENSED CONSOLIDATED BALANCE SHEETS 

 

   March 31,   December 31, 
   2021   2020 
   (Unaudited)     
ASSETS
Current Assets:          
Cash  $1,908,247   $583,325 
Accounts receivable, net   347,924    190,556 
Inventories, net   24,808    42,496 
Prepaid expenses   37,913    91,253 
Deposit - current portion       100,000 
Total Current Assets   2,318,892    1,007,630 
           
Property and equipment, net   4,451,973    4,492,510 
Operating lease right-of-use asset   75,016    86,558 
Deposits   6,630    6,630 
           
Total Assets  $6,852,511   $5,593,328 
           
LIABILITIES AND STOCKHOLDERS' EQUITY          
Current Liabilities:          
Accounts payable and accrued liabilities  $341,334   $198,870 
Accounts payable - related party       17,471 
Other current liabilities   6,332    6,332 
Customer deposit   3,927    57,377 
Loan, current portion   355,021    194,125 
Lease liability, current portion   55,890    53,384 
Total Current Liabilities   762,504    527,559 
           
Non-Current Liabilities:          
Lease liability, less current portion   26,402    41,287 
Loan, less current portion   1,805,536    202,735 
Other liability   17,135    17,135 
Total Non-Current Liabilities   1,849,073    261,157 
           
Total Liabilities   2,611,577    788,716 
           
Contingencies (Note 13)        
           
Stockholders' Equity:          
Common stock, par value $0.001 per share, 75,000,000 shares authorized; 40,959,741 shares issued and outstanding as of March 31, 2021 and December 31, 2020, respectively   40,959    40,959 
Additional paid-in capital   14,487,896    14,381,058 
Shares to be issued, common shares   110,709    98,709 
Accumulated deficit   (10,398,630)   (9,716,114)
Total Stockholders' Equity   4,240,934    4,804,612 
           
Total Liabilities and Stockholders' Equity  $6,852,511   $5,593,328 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 F-1 

 

 

FOCUS UNIVERSAL INC.

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(unaudited)

 

 

   Three Months Ended March 31, 
   2021   2020 
Revenue  $353,272   $295,937 
Revenue - related party   10,191    14,672 
Total Revenue   363,463    310,609 
           
Cost of Revenue   292,263    338,072 
           
Gross Profit (Loss)   71,200    (27,463)
           
Operating Expenses:          
Selling expense   512    15,070 
Compensation - officers   39,100    34,000 
Research and development   63,150    70,396 
Professional fees   377,547    433,539 
General and administrative   310,084    389,813 
Total Operating Expenses   790,393    942,818 
           
Loss from Operations   (719,193)   (970,281)
           
Other Income (Expense):          
Interest income (expense), net   (7,533)   1,275 
Interest (expense) - related party       (81)
Other income   44,210    46,781 
Total other income (expense)   36,677    47,975 
           
Loss before income taxes   (682,516)   (922,306)
           
Income tax expense        
           
Net Loss  $(682,516)  $(922,306)
           
Weight Average Number of Common Shares Outstanding: Basic and Diluted   40,959,741    40,959,741 
           
Net Loss per common share: Basic and Diluted  $(0.02)  $(0.02)

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 F-2 

 

 

FOCUS UNIVERSAL INC.

CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY

 

 

   Common stock   Additional Paid-In   Shares to be issued Common   Accumulated   Total Stockholders' 
Description  Shares   Amount   Capital   Shares   Deficit   Equity 
Balance - December 31, 2020   40,959,741   $40,959   $14,381,058   $98,709   $(9,716,114)  $4,804,612 
                               
Stock based compensation - options           106,838            106,838 
                               
Common stock to be issued for services               12,000        12,000 
                               
Net loss                   (682,516)   (682,516)
                               
Balance - March 31, 2021   40,959,741    40,959    14,487,896    110,709    (10,398,630)   4,240,934 
                               

 

 

   Common stock   Additional Paid-In   Shares to be issued   Accumulated   Total Stockholders' 
Description  Shares   Amount   Capital   Common Shares   Deficit   Equity 
Balance - December 31, 2019   40,959,741   $40,959   $13,775,908   $50,709   $(7,179,001)  $6,688,575 
                               
Stock based compensation - options           259,350            259,350 
                               
Common stock to be issued for services               12,000        12,000 
                               
Net loss                   (922,306)   (922,306)
                               
Balance - March 31, 2020   40,959,741    40,959    14,035,258    62,709    (8,101,307)   6,037,619 

 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 F-3 

 

 

FOCUS UNIVERSAL INC.

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(unaudited)

 

   Three Months Ended March 31, 
   2021   2020 
Cash flows from operating activities:          
Net Loss  $(682,516)  $(922,306)
Adjustments to reconcile net loss to net cash from operating activities:          
Bad debt expense   8,357     
Inventories reserve   (3,287)   189 
Depreciation expense   40,537    40,598 
Amortization of right-of-use assets   (837)   (378)
Stock-based compensation   12,000    12,000 
Stock option compensation - options   106,838    259,350 
Changes in operating assets and liabilities:          
Accounts receivable   (165,725)   (94,161)
Accounts receivable - related party       (23,977)
Inventories   20,975    (14,437)
Prepaid expenses   53,340    6,634 
Deposit   100,000     
Accounts payable and accrued liabilities   142,464    123,969 
Accounts payable - related party   (17,471)    
Other current liabilities       (12,334)
Interest payable - related party       (1,750)
Customer deposit   (53,450)   (22,984)
Net cash flows used in operating activities   (438,775)   (649,587)
           
Cash flows from financing activities:          
Proceeds from SBA loan   267,297     
Payment on promissory note       (50,000)
Proceeds from bank loan   1,500,000     
Prepayment on bank loan   (3,600)    
Net cash flows provided by (used in) financing activities   1,763,697    (50,000)
           
Net change in cash   1,324,922    (699,587)
           
Cash beginning of period   583,325    2,192,870 
           
Cash end of period  $1,908,247   $1,493,283 
           
Supplemental cash flow disclosure:          
Cash paid for income taxes  $   $ 
Cash paid for interest  $5,437   $1,831 

 

The accompanying notes are an integral part of these unaudited condensed consolidated financial statements

 

 F-4 

 

 

FOCUS UNIVERSAL INC.

NOTES TO THE CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(unaudited)

 

Note 1 – Organization and Operations

 

Focus Universal Inc. (“Focus”) was incorporated under the laws of the state of Nevada on December 4, 2012 (“Inception”). It is a universal smart instrument developer and manufacturer, headquartered in the Los Angeles, California metropolitan area, specializing in the research and development and commercialization of novel and proprietary universal smart technologies and instruments related to the internet of things (“IoT”) and telecommunications industries. Focus is researching and developing novel and proprietary ultra-narrowband powerline communication (“PLC”) technology that allows users to send data over existing electricity power cables without the noise problems that have plagued PLC for decades. Universal smart technology is an off-the-shelf technology utilizing an innovative hardware integrated platform. The Focus platform provides a unique and universal combined wired and wireless solution for embedded design, industrial control, functionality testing, and parameter measurement instruments and functions. Our smart technology software utilizes a smartphone, computer, or a mobile device as an interface platform and display that communicates and works in tandem with a group of external sensors or probes, or both. The external sensors and probes may be manufactured by different vendors, but the universal smart technology functions in a manner that does not require the user to have extensive knowledge of the unique characteristics of the function of each of the sensors and probes. The universal smart instrument Focus developed (called the “Ubiquitor”) consists of a reusable foundation component which includes a wireless gateway (which allows the instrument to connect to the smartphone via Bluetooth and WiFi technology), universal smart application software (“Application”) which is installed on the user’s smartphone or other mobile device and allows monitoring of the sensor readouts on the smartphone screen. The Ubiquitor also connects to a variety of individual scientific sensors that collect data, from moisture, light, airflow, voltage, and a wide variety of applications. The data then sent through a wired or wireless connection, or a combination thereof to the smartphone or other mobile device and the data is organized and displayed on the smartphone screen. The smartphone or other mobile device, foundation, and sensor readouts together perform the functions of many traditional scientific and engineering instruments and are intended to replace the traditional, wired stand-alone instruments at a fraction of their cost.

 

Perfecular Inc. (“Perfecular”) was founded in September 2009 and is headquartered in Ontario, California, and is engaged in designing certain digital sensor products and sells a broad selection of horticultural sensors and filters in North America and Europe.

 

AVX Design & Integration, Inc. (“AVX”) was incorporated on June 16, 2000 in the state of California. AVX is an internet of things (“IoT”) installation and management company specializing in high performance and easy to use Audio/Video, Home Theater, Lighting Control, Automation and Integration. Services provided by AVX include full integration of houses, apartment, commercial complex, office spaces with audio, visual and control systems to fully integrate devices in the low voltage field. AVX’s services also include partial equipment upgrade and installation.

 

Note 2 – Summary of Significant Accounting Policies

 

Basis of Presentation

 

The accompanying unaudited condensed consolidated financial statements include the accounts of Focus and its wholly-owned subsidiaries, Perfecular Inc. and AVX Design & Integration, Inc. (collectively, the “Company”, “we”, “our”, or “us”). All intercompany balances and transactions have been eliminated upon consolidation. The Company’s condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States of America (“U.S. GAAP”).

 

Going Concern 

 

In the long term, the continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. For the period ended March 31, 2021, the Company had a net loss of $682,516 and negative cash flow from operating activities of $438,775. In Q1, 2021 the Company has obtained a $1,500,000 loan from a financial institution and has a $1,500,000 loan commitment from a private related party. The loan from the financial institution requires monthly payments with the final payment due in 2026. The related party loan will accrue interest at 10% until March 15, 2022, or six months from the date the loan is funded, whichever is later (the “Initial Interest Accrual Date”). Interest on any unpaid principal after Initial Interest Accrual Date shall accrue at a fixed rate of 12% per annum until paid. The Company reserves the right to prepay this loan agreement (in whole or in part) after 6 months of the first day with no prepayment penalty. The Company may make, in its sole discretion, payments of interest only, or interest and principal, provided that the principal is not paid in full prior to six months from the date the loan is funded. The Company also plans to raise $10 million through an underwritten public offering in 2021.

 

 

 

 

 

 F-5 

 

 

With the January 1, 2021 beginning cash amount of $585,325 and the loan of $1,500,000, the Company will have enough cash to cover its projected annual cash burn rate of $1,967,074. With the additional $1,500,000 related party loan, the Company will have adequate reserves to continue operations in 2021 and 2022. The related party which will provide the loan to the Company is owned by a director of the Company, which we have evaluated to be a reliable source of cashflow. The $10 million planned public offering will contribute to a projected December 31, 2021 cash balance of $11,000,000. Historically, the Company has been successful in reaching planned its fund-raising targets.

 

In 2020 the Company had negative operating cashflow of approximately $1.96 million, mainly resulting from net loss. The Company is currently developing its products and licenses and expects to generate profit once the products and licenses are available for the market, which will begin to alleviate the negative cashflow. Currently, the Company is testing 4 Mbps ultra-narrowband power line communication printed circuit boards, the testing is expected to complete in Q2 2021. The ultra-narrowband power line communication products will launch in Q4, 2021. The portable universal smart device is also in the final printed circuit board layout stage, the Company is planning to launch this product in Q4 2021. Initially, new products would require cash to manufacture and promote. The Company expects to begin generating positive cashflow with the launch of above-mentioned products from Q2 of 2022.

 

Overall, we expect that with the loan we obtained, along with the committed related-party loan, and planned capital raising will provide adequate cash for the Company to continue operation as a going concern throughout 2021 and 2022. The Company expects the loans and offering will generate cash for 2021’s operation and be able to pay off the loans obtained through the offering with sufficient cashflow for 2021 and 2022. Thus, the previous factors raising substantial doubt to continue as a going concern have been alleviated.

 

Principles of Consolidation

 

The accompanying consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries, Perfecular Inc. and AVX Design & Integration. Focus and Perfecular, collectively “the entities” were under common control; therefore, in accordance with Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) 805-50-45, the acquisition of Perfecular was accounted for as a business combination between entities under common control and treated similar to a pooling of interest transaction. On March 15, 2019, Focus entered into a stock purchase agreement with AVX whereby Focus purchased 100% of the outstanding stock of AVX. All significant intercompany transactions and balances have been eliminated.

 

Segment Reporting

 

The Company currently has two operating segments. In accordance with ASC 280, Segment Reporting (“ASC 280”), the Company considers operating segments to be components of the Company’s business for which separate financial information is available and evaluated regularly by management in deciding how to allocate resources and to assess performance. Management reviews financial information presented on a consolidated basis for purposes of allocating resources and evaluating financial performance. Accordingly, the Company has determined that it has two operating and reportable segments.

 

Asset information by operating segment is not presented as the chief operating decision maker does not review this information by segment. The reporting segments follow the same accounting policies used in the preparation of the Company’s unaudited condensed consolidated financial statements.

  

Use of Estimates

 

The preparation of consolidated financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities as of the date of the accompanying consolidated financial statements, and the reported amounts of revenues and expenses during the reporting period. The Company bases its estimates and assumptions on current facts, historical experience, and various other factors that it believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities and the accrual of costs and expenses that are not readily apparent from other sources.

 

 

 F-6 

 

 

The actual results experienced by the Company may differ materially and adversely from the Company’s estimates. To the extent there are material differences between the estimates and the actual results, future results of operations will be affected. Significant estimates in the accompanying financial statements include the lease term impacting right-of use asset and lease liability, useful lives of property and equipment, useful lives of intangible assets, allowance for doubtful accounts, inventory reserves, debt discounts, valuation of derivatives, and the valuation allowance on deferred tax assets. The Company regularly evaluates its estimates and assumptions.

 

Cash

 

The Company considers all highly liquid investments with a maturity of three months or less to be cash. At times, such investments may be in excess of Federal Deposit Insurance Corporation (FDIC) insurance limit. There were no cash equivalents held by the Company at March 31, 2021 and December 31, 2020.

 

Accounts Receivable

 

The Company grants credit to clients that sell the Company’s products or engage in construction service under credit terms that it believes are customary in the industry and do not require collateral to support customer receivables. The accounts receivable balances are generally collected within 30 to 90 days of the product sale.

 

Allowance for Doubtful Accounts

 

The Company estimates an allowance for doubtful accounts based on historical collection trends and review of the current status of trade accounts receivable. It is reasonably possible that the Company's estimate of the allowance for doubtful accounts will change. As of March 31, 2021 and December 31, 2020, allowance for doubtful accounts amounted to $52,876 and $44,519, respectively.

 

Concentrations of Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash and cash equivalents. The Company limits its exposure to credit loss by investing its cash with high credit quality financial institutions.

  

Inventory

 

Inventory consists primarily of parts and finished goods and is valued at the lower of the inventory’s cost or net realizable value under the first-in-first-out method. Management compares the cost of inventory with its market value and an allowance is made to write down inventory to market value, if lower. Inventory allowances are recorded for obsolete or slow-moving inventory based on assumptions about future demand and marketability of products, the impact of new product introductions and specific identification of items, such as discontinued products. These estimates could vary significantly from actual requirements, for example, if future economic conditions, customer inventory levels, or competitive conditions differ from expectations. The Company regularly reviews the value of inventory based on historical usage and estimated future usage. If estimated realized value of our inventory is less than cost, we make provisions in order to reduce its carrying value to its estimated market value. As of March 31, 2021 and December 31, 2020, inventory reserve amounted to $67,275  and $70,562, respectively.

 

Property and Equipment

 

Property and equipment are stated at cost. The cost and accumulated depreciation of assets sold or retired are removed from the respective accounts and any gain or loss is included in earnings. Maintenance and repairs are expensed currently. Major renewals and betterments are capitalized. Depreciation is computed using the straight-line method. Estimated useful lives are as follows:

 

Fixed assets Useful life
Furniture 5 years
Equipment 5 years
Warehouse 39 years
Improvement 5 years
Construction in progress
Land

 

 

 F-7 

 

 

Long-Lived Assets

 

The Company applies the provisions of FASB ASC Topic 360, Property, Plant, and Equipment, which addresses financial accounting and reporting for the impairment or disposal of long-lived assets. ASC 360 requires impairment losses to be recorded on long-lived assets used in operations when indicators of impairment are present and the undiscounted cash flows estimated to be generated by those assets are less than the assets’ carrying amounts. In that event, a loss is recognized based on the amount by which the carrying value exceeds the fair value of the long-lived assets. Loss on long-lived assets to be disposed of is determined in a similar manner, except that fair values are reduced for the cost of disposal. Long-term assets of the Company are reviewed when circumstances warrant as to whether their carrying value has become impaired. The Company considers assets to be impaired if the carrying value exceeds the future projected cash flows from related operations. The Company also re-evaluates the periods of amortization to determine whether subsequent events and circumstances warrant revised estimates of useful lives. Based on its review at March 31, 2021 and December 31, 2020, the Company believes there was no impairment of its long-lived assets.

  

Share-based Compensation

 

The Company accounts for stock-based compensation to employees in conformity with the provisions of ASC Topic 718, Stock-Based Compensation. Stock-based compensation to employees consist of stock options grants and restricted shares that are recognized in the statement of operations based on their fair values at the date of grant.

 

The measurement of stock-based compensation is subject to periodic adjustments as the underlying equity instruments vest and is recognized as an expense over the period during which services are received.

 

The Company calculates the fair value of option grants utilizing the Black-Scholes pricing model and estimates the fair value of the stock based upon the estimated fair value of the common stock. The amount of stock-based compensation recognized during a period is based on the value of the portion of the awards that are ultimately expected to vest.

 

The resulting stock-based compensation expense for both employee and non-employee awards is generally recognized on a straight- line basis over the requisite service period of the award.

  

Fair Value of Financial Instruments

 

The Company follows paragraph ASC 825-10-50-10 for disclosures about fair value of its financial instruments and paragraph ASC 820-10-35-37 (“Paragraph 820-10-35-37”) to measure the fair value of its financial instruments. Paragraph 820-10-35-37 establishes a framework for measuring fair value in accounting principles generally accepted in the United States of America (U.S. GAAP), and expands disclosures about fair value measurements.

 

To increase consistency and comparability in fair value measurements and related disclosures, Paragraph 820-10-35-37 establishes a fair value hierarchy which prioritizes the inputs to valuation techniques used to measure fair value into three (3) broad levels. The fair value hierarchy gives the highest priority to quoted prices (unadjusted) in active markets for identical assets or liabilities and the lowest priority to unobservable inputs. The three (3) levels of fair value hierarchy defined by Paragraph 820-10-35-37 are described below:

 

  Level 1: Quoted market prices available in active markets for identical assets or liabilities as of the reporting date.

 

  Level 2: Pricing inputs other than quoted prices in active markets included in Level 1, which are either directly or indirectly observable as of the reporting date.

 

  Level 3: Pricing inputs that are generally unobservable inputs and not corroborated by market data.

 

Financial assets are considered Level 2 when their fair values are determined using pricing models, discounted cash flow methodologies or similar techniques and at least one significant model assumption or input is unobservable.

 

The carrying amount of the Company’s financial assets and liabilities, such as cash, prepaid expenses, accounts payable, and accrued expenses, approximate their fair value because of the short maturity of those instruments.

 

 

 F-8 

 

 

Transactions involving related parties cannot be presumed to be carried out on an arm's-length basis, as the requisite conditions of competitive, free-market dealings may not exist. Representations about transactions with related parties, if made, shall not imply that the related party transactions were consummated on terms equivalent to those that prevail in arm's-length transactions unless such representations can be substantiated.

 

However, it is not practical to determine the fair value of advances from stockholders, if any, due to their related party nature.

 

Revenue Recognition

 

On September 1, 2018, the Company adopted ASC 606 – Revenue from Contracts with Customers using the modified retrospective transition approach. The core principle of ASC 606 is that revenue should be recognized in a manner that depicts the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled for exchange of those goods or services. The Company’s updated accounting policies and related disclosures are set forth below, including the disclosure for disaggregated revenue. The impact of adopting ASC 606 was not material to the Condensed Consolidated Financial Statements.

  

Revenue from the Company is recognized under Topic 606 in a manner that reasonably reflects the delivery of its services and products to customers in return for expected consideration and includes the following elements:

 

  executed contracts with the Company’s customers that it believes are legally enforceable;

 

  identification of performance obligations in the respective contract;

 

  determination of the transaction price for each performance obligation in the respective contract;

 

  allocation of the transaction price to each performance obligation; and

 

  recognition of revenue only when the Company satisfies each performance obligation.

 

These five elements, as applied to each of the Company’s revenue categories, is summarized below:

 

  Product sales – revenue is recognized at the time of sale of equipment to the customer.

 

  Service sales – revenue is recognized based on the service been provided to the customer.

 

Revenue from construction projects is recognized over time using the percentage-of-completion method under the cost approach. The percentage of completion is determined by estimating stage of work completed. Under this approach, recognized contract revenue equals the total estimated contract revenue multiplied by the percentage of completion. Our construction contracts are unit priced, and an account receivable is recorded for amounts invoiced based on actual units produced.

 

Cost of Revenue

 

Cost of revenue includes the cost of services, labor, and product incurred to provide product sales, service sales, and project sales.

 

Research and Development

 

Research and development costs are expensed as incurred. Research and development costs primarily consist of efforts to refine existing product models and develop new product models.

 

 

 F-9 

 

 

Related Parties

 

The Company follows ASC 850-10 for the identification of related parties and disclosure of related party transactions. Pursuant to ASC 850-10-20 the related parties include: a) affiliates of the Company; b) entities for which investments in their equity securities would be required, absent the election of the fair value option under the Fair Value Option Subsection of ASC 825–10–15, to be accounted for by the equity method by the investing entity; c) trusts for the benefit of employees, such as pension and profit-sharing trusts that are managed by or under the trusteeship of management; d) principal owners of the Company; e) management of the Company; f) other parties with which the Company may deal if one party controls or can significantly influence the management or operating policies of the other to an extent that one of the transacting parties might be prevented from fully pursuing its own separate interests; and g) other parties that can significantly influence the management or operating policies of the transacting parties or that have an ownership interest in one of the transacting parties and can significantly influence the other to an extent that one or more of the transacting parties might be prevented from fully pursuing its own separate interests.

  

The condensed consolidated financial statements shall include disclosures of material related party transactions, other than compensation arrangements, expense allowances, and other similar items in the ordinary course of business. However, disclosure of transactions that are eliminated in the preparation of consolidated financial statements is not required in those statements. The disclosures shall include: (a) the nature of the relationship(s) involved; (b) a description of the transactions, including transactions to which no amounts or nominal amounts were ascribed, for each of the periods for which income statements are presented, and such other information deemed necessary to an understanding of the effects of the transactions on the consolidated financial statements; (c) the dollar amounts of transactions for each of the periods for which income statements are presented and the effects of any change in the method of establishing the terms from that used in the preceding period; and (d) amounts due from or to related parties as of the date of each balance sheet presented and, if not otherwise apparent, the terms and manner of settlement.

 

Commitments and Contingencies

 

The Company follows ASC 450-20 to report accounting for contingencies. Certain conditions may exist as of the date the consolidated financial statements are issued, which may result in a loss to the Company, but which will only be resolved when one or more future events occur or fail to occur. The Company assesses such contingent liabilities, and such assessment inherently involves an exercise of judgment. In assessing loss contingencies related to legal proceedings that are pending against the Company or unasserted claims that may result in such proceedings, the Company evaluates the perceived merits of any legal proceedings or unasserted claims as well as the perceived merits of the amount of relief sought or expected to be sought therein.

 

If the assessment of a contingency indicates that it is probable that a material loss has been incurred and the amount of the liability can be estimated, then the estimated liability would be accrued in the Company’s consolidated financial statements. If the assessment indicates that a potential material loss contingency is not probable but is reasonably possible, or is probable but cannot be estimated, then the nature of the contingent liability, and an estimate of the range of possible losses, if determinable and material, would be disclosed.

 

Loss contingencies considered remote are generally not disclosed unless they involve guarantees, in which case the guarantees would be disclosed. Management does not believe, based upon information available at this time that these matters will have a material adverse effect on the Company’s financial position, results of operations or cash flows. However, there is no assurance that such matters will not materially and adversely affect the Company’s business, financial position, and results of operations or cash flows.

 

Income Tax Provision

 

The Company accounts for income taxes in accordance with ASC Topic 740, Income Taxes (ASC 740). ASC 740 requires a company to use the asset and liability method of accounting for income taxes, whereby deferred tax assets are recognized for deductible temporary differences, and deferred tax liabilities are recognized for taxable temporary differences. Temporary differences are the differences between the reported amounts of assets and liabilities and their tax bases. Deferred tax assets are reduced by a valuation allowance when, in the opinion of management, the Company does not foresee generating taxable income in the near future and utilizing its deferred tax asset, therefore, it is more likely than not that some portion, or all of, the deferred tax assets will not be realized. Deferred tax assets and liabilities are adjusted for the effects of changes in tax laws and rates on the date of enactment.

 

 

 F-10 

 

 

Under ASC 740, a tax position is recognized as a benefit only if it is “more likely than not” that the tax position would be sustained in a tax examination, with a tax examination being presumed to occur. The amount recognized is the largest amount of tax benefit that is more than 50% likely to be realized on examination. For tax positions not meeting the “more likely than not” test, no tax benefit is recorded. The Company has no material uncertain tax positions for any of the reporting periods presented.

 

Income taxes are accounted for using the asset and liability method. Deferred income taxes are provided for temporary differences in recognizing certain income, expense, and credit items for financial reporting purposes and tax reporting purposes. Such deferred income taxes primarily relate to the difference between the tax basis of assets and liabilities and their financial reporting amounts. Deferred tax assets and liabilities are measured by applying enacted statutory tax rates applicable to the future years in which deferred tax assets or liabilities are expected to be settled or realized. There was no material deferred tax asset or liabilities as of September 30, 2020 and December 31, 2019.

 

As of March 31, 2021 and December 31, 2020, the Company did not identify any material uncertain tax positions.

  

Basic and Diluted Net Income (Loss) Per Share

 

Net income (loss) per share is computed pursuant to ASC 260-10-45. Basic net income (loss) per share (“EPS”) is computed by dividing net income (loss) by the weighted average number of shares outstanding during the period.

 

Diluted EPS is computed by dividing net income (loss) by the weighted average number of shares of stock and potentially outstanding shares of stock during the period to reflect the potential dilution that could occur from common shares issuable through contingent shares issuance arrangement, stock options or warrants.

 

Due to the net loss incurred by the Company, potentially dilutive instruments would be anti-dilutive. Accordingly, diluted loss per share is the same as basic loss for all periods presented. The following potentially dilutive shares were excluded from the shares used to calculate diluted earnings per share as their inclusion would be anti-dilutive.

 

Three months ended March 31,   2021     2020  
Stock options     236,250       140,000  
Total     236,250       140,000  

 

Subsequent Events

 

The Company follows the guidance in ASC 855-10-50 for the disclosure of subsequent events. The Company will evaluate subsequent events through the date when the financial statements were issued. Pursuant to ASU 2010-09, the Company as an SEC filer considers its financial statements issued when they are widely distributed to users, such as through filing them on EDGAR. Based upon the review, other than described in Note 14 – Subsequent Events, the Company did not identify any recognized or non-recognized subsequent events that would have required adjustment or disclosure in the condensed consolidated financial statements.

 

Reclassification

 

Certain reclassifications have been made to the condensed consolidated financial statements for prior years to the current year’s presentation. Such reclassifications have no effect on net income as previously reported.

 

Note 3 – Recent Accounting Pronouncement

 

Recently Adopted Accounting Standards

 

In February 2016, the Financial Accounting Standards Board (“FASB”) issued Accounting Standard Update (“ASU”) 2016-02, Leases (Topic 842) (“Topic 842”), which requires lessees to recognize leases on the balance sheet and disclose key information about leasing arrangements. Topic 842 was subsequently amended by ASU 2018-01, Land Easement Practical Expedient for Transition to Topic 842; ASU 2018-10, Codification Improvements to Topic 842, Leases; ASU 2018-11, Targeted Improvements; and ASU 2019-01, Codification Improvements. The new standard establishes a right-of-use model (“ROU”) that requires a lessee to recognize ROU asset and lease liability on the balance sheet for all leases with a term longer than 12 months. Leases are classified as finance or operating, with classification affecting the pattern and classification of expense recognition in the statement of income.

 

 

 F-11 

 

 

The new standard was effective for the Company on January 1, 2019. A modified retrospective transition approach is required, applying the new standard to all leases existing at the date of initial application. An entity may choose to use either (1) its effective date or (2) the beginning of the earliest comparative period presented in the financial statements as its date of initial application. The Company adopted the new standard on January 1, 2019 and used the effective date as its date of initial application. Consequently, prior period financial information has not been recast and the disclosures required under the new standard have not been provided for dates and periods before January 1, 2019.

 

The new standard provides a number of optional practical expedients in transition. The Company elected the “package of practical expedients,” which permits it not to reassess under the new standard its prior conclusions about lease identification, lease classification and initial direct costs. The Company did not elect the use-of-hindsight or the practical expedient pertaining to land easements, the latter not being applicable to the Company. The new standard also provides practical expedients for an entity’s ongoing accounting. The Company elected the short-term lease recognition exemption for all leases that qualify. This means, for those leases that qualify, it has not recognized ROU assets or lease liabilities, and this includes not recognizing ROU assets or lease liabilities for existing short-term leases of those assets in transition. The Company also elected the practical expedient to not separate lease and non-lease components for all of its leases.

 

The Company believes the most significant effects of the adoption of this standard relate to (1) the recognition of new ROU assets and lease liabilities on its consolidated balance sheet for its office operating leases and (2) providing new disclosures about its leasing activities. There was no change in its leasing activities as a result of adoption.

 

In June 2018, the FASB issued ASU 2018-07, Stock Compensation (Topic 718): Improvements to Nonemployee Share-Based Payment Accounting, which simplifies the accounting for share-based payments granted to nonemployees for goods and services and aligns most of the guidance on such payments to nonemployees with the requirements for share-based payments granted to employees. ASU 2018-07 is effective on January 1, 2019. Early adoption is permitted. The adoption of this ASU did not have a material impact on the Company’s consolidated financial statements.

 

In June 2020, the FASB issued ASU 2020-05 in response to the ongoing impacts to U.S. businesses in response to the COVID-19 pandemic. ASU 2020-05, Revenue from Contracts with Customers (Topic 606) and Leases (Topic 842) Effective Dates for Certain Entities provide a limited deferral of the effective dates for implementing previously issued ASU 606 and ASU 842 to give some relief to businesses considering the difficulties they are facing during the pandemic. These entities may defer application to fiscal years beginning after December 15, 2019, and interim periods within fiscal years beginning after December 15, 2020. As the Company has already adopted ASU 606 and ASU 842, the Company does not anticipate any effect on its financial statements.

 

Recently Issued Accounting Standards Not Yet Adopted

 

In June 2016, FASB issued ASU 2016-13, Financial Instruments - Credit Losses, which changes the accounting for recognizing impairments of financial assets. Under the new guidance, credit losses for certain types of financial instruments will be estimated based on expected losses. The new guidance also modifies the impairment models for available-for-sale debt securities and for purchased financial assets with credit deterioration since their origination. In February 2020, the FASB issued ASU 2020-02, Financial Instruments-Credit Losses (Topic 326) and Leases (Topic 842) - Amendments to SEC Paragraphs Pursuant to SEC Staff Accounting Bulletin No. 119 and Update to SEC Section on Effective Date Related to Accounting Standards Update No. 2016-02, Leases (Topic 842), which amends the effective date of the original pronouncement for smaller reporting companies. ASU 2016-13 and its amendments will be effective for the Company for interim and annual periods in fiscal years beginning after December 15, 2022. The Company believes the adoption will modify the way the Company analyzes financial instruments, but it does not anticipate a material impact on results of operations. The Company is in the process of determining the effects the adoption will have on its consolidated financial statements.

 

In December 2019, FASB issued ASU 2019-12, Income Taxes, which provides for certain updates to reduce complexity in the accounting for income taxes, including the utilization of the incremental approach for intra-period tax allocation, among others. The amendments in ASU 2019-12 are effective for fiscal years, and interim periods within those fiscal years, beginning after December 15, 2020. The Company does not expect the implementation of ASU 2019-12 to have a material effect on its consolidated financial statements.

  

Management does not believe that any recently issued, but not yet effective, accounting standards could have a material effect on the accompanying financial statements. As new accounting pronouncements are issued, we will adopt those that are applicable under the circumstances.

  

 

 F-12 

 

 

Note 4 – Inventory, net

 

At March 31, 2021 and December 31, 2020, inventory consisted of the following:

 

    March 31,
2021
    December 31,
2020
 
Parts   $ 40,180     $ 45,509  
Finished goods     51,903       67,549  
Total     92,083       113,058  
Less inventory reserve     (67,275 )     (70,562 )
Inventory, net   $ 24,808     $ 42,496  

 

Note 5 – Deposit

 

Deposit balance as of March 31, 2021 amounted to $6,630 for lease agreement deposit. Deposit balance as of December 31, 2020 amounted to $106,630, including $6,630 for lease agreement deposit and $100,000 for payment made into an escrow account for purchasing a target company. On March 26, 2021, the management of CWS decided to terminate the LOI. The LOI was terminated effective as of March 29, 2021 and $100,000 was returned on March 29, 2021.

   

Note 6 – Property and Equipment

 

At March 31, 2020 and December 31, 2019, property and equipment consisted of the following:

 

    March 31,
2021
    December 31,
2020
 
Warehouse   $ 3,789,773     $ 3,789,773  
Land     731,515       731,515  
Building Improvement     238,666       238,666  
Furniture and fixture     27,631       27,631  
Equipment     48,378       48,378  
Software     1,995       1,995  
Total cost     4,837,958       4,837,958  
Less accumulated depreciation     (385,985 )     (345,448 )
Property and equipment, net   $ 4,451,973     $ 4,492,510  

 

Depreciation expense for the three months ended March 31, 2021 and 2020 amounted to $40,537 and $40,598, respectively.

 

The Company purchased a warehouse in Ontario, California in September 2018 and leased an unused portion to a third party. The tenant paid $12,335 as a security deposit, shown as other liability in non-current liability.

 

Note 7 – Related Party Transactions

 

Revenue generated from Vitashower Corp., a company owned by the CEO’s wife, amounted to $10,191 and $14,672 for the three months ended March, 2021 and 2020, respectively. Account receivable balance due from Vitashower Corp. amounted to $0 and $0 as of March 31, 2021 and December 31, 2020, respectively.

 

Compensation for services provided by the President and Chief Executive Officer for the three months ended March 31, 2021 and 2020 amounted to $30,000 and $30,000, respectively.

 

 

 F-13 

 

 

Note 8 – Business Concentration and Risks

 

Major customers

 

One customer accounted for 48% and 17% of the total accounts receivable as of March 31, 2021 and December 31, 2020, respectively. This customer accounted for 80% and 58% of the total revenue for the period ended March 31, 2021 and 2020, respectively.

  

Major vendors

 

One vendor accounted for 96% and 0% of total accounts payable at March 31, 2021 and December 31, 2020, respectively. This vendor accounted for 84% and 38% of the total purchases for the period ended March 31, 2021 and 2020, respectively.

 

Note 9 – Operating Lease Right-of-use Asset and Operating Lease Liability

 

Operating lease right-of-use assets and liabilities are recognized at the present value of the future lease payments at the lease commencement date. The interest rate used to determine the present value is our incremental borrowing rate, estimated to be 15%, as the interest rate implicit in our lease is not readily determinable. During the three months ended March 31, 2021 and 2020, the Company recorded $16,295 and $16,295, respectively as operating lease expense.

 

The Company currently has a lease agreement for AVX’s operation for a monthly payment of $5,258 and shall increase by 3% every year. The lease commenced July 1, 2015 and expires on August 31, 2022. A security deposit of $5,968 was also held for the duration of the lease term.

 

In adopting ASC Topic 842, Leases (Topic 842), the Company has elected the ‘package of practical expedients,’ which permit it not to reassess under the new standard its prior conclusions about lease identification, lease classification and initial direct costs. The Company did not elect the use-of-hindsight or the practical expedient pertaining to land easements; the latter is not applicable to the Company. In addition, the Company elected not to apply ASC Topic 842 to arrangements with lease terms of 12 months or less. On March 15, 2019 when AVX was acquired, upon adoption of ASC Topic 842, the Company recorded a right-of-use asset.

 

Right-of-use asset is summarized below:

 

   March 31, 2021   March 31, 2020 
Office lease  $157,213   $157,213 
Less: accumulated amortization   (82,197)   (38,669)
Right-of-use asset, net  $75,016   $118,544 

 

Operating Lease liability is summarized below:

   March 31, 2021   March 31, 2020 
Office lease  $73,025   $128,707 
Less: current portion   (55,890)   (46,415)
Long-term portion  $17,135   $82,292 

 

Maturity of lease liability is as follows:

 

Year ending December 31, 2021  $48,273 
Year ending December 31, 2022   43,655 
Total future minimum lease payment   91,928 
Imputed interest   (9,636)
Lease Obligation, net  $82,292 

  

 

 F-14 

 

 

Note 10 – Loans

 

Paycheck Protection Program

 

On April 24, 2020, AVX Design & Integration, Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from JPMorgan Chase Bank, N.A. related to the COVID-19 pandemic in the amount of $116,460, which we received on May 1, 2020. The SBA Loan has a fixed interest rate of 0.98 percent per annum and a maturity date two years from the date the loan was issued.

 

On May 4, 2020, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Bank of America related to the COVID-19 pandemic in the amount of $151,500, which we received on May 4, 2020. The SBA Loan has a fixed interest rate of 1 percent per annum and a maturity date two years from the date loan was issued.

 

 On March 2, 2021, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Wells Fargo related to the COVID-19 pandemic in the amount of $158,547, which we received on March 3, 2021. The SBA Loan has a fixed interest rate of 1 percent per annum and a maturity date two years from the date loan was issued.

 

On March 10, 2021, AVX Design & Integration, Inc. entered into an agreement to receive an SBA Loan from Chase Bank related to the COVID-19 pandemic in the amount of $108,750. The SBA Loan has a fixed interest rate of 0.98 percent per annum and a maturity date five years from the date loan was issued.

 

Economic Injury Disaster Loan

 

On June 4, 2020, Perfecular Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from Bank of America related to the COVID-19 pandemic in the amount of $81,100, which we received on June 4, 2020. The SBA Loan has a fixed interest rate of 3.75 percent per annum and a maturity date thirty years from the date loan was issued.

 

On June 5, 2020, AVX Design & Integration, Inc. entered into an agreement to receive a U.S. Small Business Administration Loan (“SBA Loan”) from JPMorgan Chase Bank, N.A. related to the COVID-19 pandemic in the amount of $56,800, which we received on June 5, 2020. The SBA Loan has a fixed interest rate of 3.75 percent per annum and a maturity date thirty years from the date loan was issued.

 

Bank Loan

 

On January 8, 2021, Focus Universal Inc. entered into a secured promissory note agreement with East West Bank in the amount of $1,500,000. The note has a variable interest rate of 0.25% above Wall Street Journal Prime Rate. The note requires monthly payments with the final payment of $1,357,178 due on  January 22, 2026.

 

Borrower will use all of the proceeds from this Loan solely as working capital to alleviate economic injury caused by disaster occurring in the month of January 31, 2020 and continuing thereafter.

  

   March 31,
2021
   December 31,
2020
 
SBA Loan  $664,157   $396,860 
Bank Loan   1,496,400     
Total   2,160,557    396,860 
Less: current portion   (355,021)   (194,125)
Long term portion  $1,805,536   $202,735 

 

Interest expense incurred from the loans amounted to $7,565 and $0 for the three months ended March 31, 2021 and 2020, respectively.

 

 

 F-15 

 

 

Note 11 – Stockholders’ Equity

 

Shares authorized

 

Upon formation, the total number of shares of all classes of stock that the Company is authorized to issue is seventy-five million (75,000,000) shares of common stock, par value $0.001 per share.

 

Common stock

 

As of March 31, 2021 the Company had 40,959,741 shares of common stock issued and outstanding.

 

During the three months ended March 31, 2021, the Company did not issue common stock.

 

Shares to be issued for compensation

 

The Company entered into agreements with third party consultants for financing and management consultation. The Company has incurred consulting service fees not paid in cash amounting to $12,000 for the period ended March 31, 2021, which the Company intends to issue stock as compensation for services rendered. Expenses incurred but not yet paid in shares as of March 31, 2021 and 2020 amounted to $110,709 and $62,709, respectively.

 

Stock options

 

On January 4, 2021, each member of the Board was granted 15,000 options to purchase shares at $3.00 per share.

 

On August 6, 2019, each member of the Board was granted 30,000 options to purchase shares at $5.70 per share.

 

As of March 31, 2021, there were 315,000 options granted, 236,250 options vested, 0 options unvested, and 315,000 outstanding stock options.

 

For the three months ended March 31, 2021 and 2020, the Company’s stock option compensation expenses amounted to $259,350 and $106,838, respectively.

 

The fair value of the warrants listed above was determined using the Black-Scholes option pricing model with the following assumptions:

 

   March 31,   March 31, 
   2021   2020 
Risk-free interest rate   0.93%    1.71% 
Expected life of the options   10 years    10 years 
Expected volatility   122.93%    158.86% 
Expected dividend yield   0%    0% 

 

The following is a summary of options activity from December 31, 2020 to March 31, 2021:

 

Options  Shares   Weighted average exercise price   Weighted Average Remaining Contractual Life   Aggregate Intrinsic Value 
Outstanding at December 31, 2020   210,000   $9.61    9.61     
Granted   105,000    1.00         
Exercised                
Forfeited or expired                
Outstanding at March 31, 2021   315,000   $4.80    8.83    131,250 
Vested as of March 31, 2021   236,250   $5.40    8.51    32,813 
Exercisable at March 31, 2021   315,000   $5.40    8.51    32,813 

  

 

 F-16 

 

 

The exercise price for options outstanding and exercisable at March 31, 2021:

 

Outstanding     Exercisable  
                     
Number of       Exercise     Number of       Exercise  
Options       Price     Options       Price  
30,000     $ 5.70     30,000     $ 5.70  
30,000       5.70     30,000       5.70  
30,000       5.70     30,000       5.70  
30,000       5.70     30,000       5.70  
30,000       5.70     30,000       5.70  
30,000       5.70     30,000       5.70  
30,000       5.70     30,000       5.70  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
15,000       3.00     15,000       3.00  
315,000             315,000          

 

Note 12 – Segment reporting

 

The Company consists of two types of operations. Focus Universal, Inc. and Perfecular Inc. (“Focus”) involve wholesale, research and development of universal smart instrument and farming devices. AVX Design & Integration, Inc. (“AVX”) is an IoT installation and management company specializing in high performance and easy to use audio/video, home theater, lighting control, automation, and integration. The table below discloses income statement information by segment.

 

   Three months ended March 31, 2021 
   Focus   AVX   Total 
             
Revenue  $313,530   $39,742   $353,272 
Revenue - related party   10,191        10,191 
Total revenue   323,721    39,742    363,463 
                
Cost of Revenue   254,223    38,040    292,263 
                
Gross Profit   69,498    1,702    71,200 
                
Operating Expenses:               
Selling   332    180    512 
Compensation - officers   39,100        39,100 
Research and development   63,150        63,150 
Professional fees   376,633    914    377,547 
General and administrative   239,513    70,571    310,084 
Total Operating Expenses   718,728    71,665    790,393 
                
Loss from Operations   (649,230)   (69,963)   (719,193)
                
Other Income (Expense):               
Interest income (expense), net   (6,670)   (863)   (7,533)
Interest (expense) – related party            
Other income (expense), net   45,385    (1,175)   44,210 
Total other income (expense)   38,715    (2,038)   36,677 
                
Loss before income taxes   (610, 515    (72,003)   (682,516)
                
Tax expense            
                
Net Loss  $(610,515)  $(72,003)  $(682,516)

  

 

 F-17 

 

 

Note 13 – Commitments and Contingencies

 

In the normal course of business or otherwise, the Company may become involved in legal proceedings. The Company will accrue a liability for such matters when it is probable that a liability has been incurred and the amount can be reasonable estimated. When only a range of possible loss can be established, the most probable amount in the range is accrued. The accrual for a litigation loss contingency might include, for example, estimates of potential damages, outside legal fees, and other directly related costs expected to be incurred.

 

Note 14 – Subsequent Events

 

The Company has evaluated all other subsequent events through the date these condensed consolidated financial statements were issued and determine that there were no subsequent events or transactions that require recognition or disclosures in the condensed consolidated financial statements.

 

 F-18 

 

 

ITEM 2.  MANAGEMENT'S DISCUSSION AND ANALYSIS AND PLAN OF OPERATION

 

The following discussion of our financial condition and results of operations should be read in conjunction with, and is qualified in its entirety by, the consolidated financial statements and notes thereto included in, Item 1 in this Quarterly Report on Form 10-Q. This item contains forward-looking statements that involve risks and uncertainties. Actual results may differ materially from those indicated in such forward-looking statements.

 

Forward-Looking Statements

 

This Quarterly Report on Form 10-Q and the documents incorporated herein by reference contain forward-looking statements. Such forward-looking statements are based on current expectations, estimates, and projections about our industry, management beliefs, and certain assumptions made by our management. Words such as “anticipates,” “expects,” “intends,” “plans,” “believes,” “seeks,” “estimates,” variations of such words, and similar expressions are intended to identify such forward-looking statements. These statements are not guarantees of future performance and are subject to certain risks, uncertainties, and assumptions that are difficult to predict; therefore, actual results may differ materially from those expressed or forecasted in any such forward-looking statements. Unless required by law, we undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events, or otherwise. However, readers should carefully review the risk factors set forth herein and in other reports and documents that we file from time to time with the Securities and Exchange Commission, particularly the Report on Form 10-K, Form 10-Q and any Current Reports on Form 8-K.

  

Narrative Description of the Business

 

Focus Universal Inc. (the “Company,” “we,” “us,” or “our”) is a Nevada corporation. We have developed four fundamental disruptive proprietary technologies which we believe solve the most fundamental problems plaguing the internet of things (“IoT”) industry through: (1) increasing overall chip integration by shifting it to the device level; (2) creating a faster 5G cellular technology by using Ultra-narrowband technology; (3) leveraging ultra-narrowband power line communication (“PLC”) technology; and (4) User Interface Machine auto generation technology. Our Universal smart technology is designed to overcome instrumentation interoperability and interchangeability. The electronic design starts from a 90% completed common foundation we call our universal smart instrumentation platform (“USIP”), instead of the current method of building each stand-alone instrument from scratch. Our method eliminates redundant hardware and software and results in significant cost savings and production efficiency. We have developed software machine auto generation technology to replace the manual software designs which are currently in use and cannot satisfy the exponential growth of future IoT industry demand. Our ultra-narrowband PLC enables our users to send data over existing electricity power cables and immediately establish a ubiquitous data network without substantial new investment for a dedicated wiring infrastructure. Our ultra-narrow band technology is capable of overcoming the noise problems communicating through power lines that have hindered our competitors for over a century. Our wireless communication technology allows for longer-range coverage, is more energy effective and has much faster data sending speeds than the current 5G technology speeds being used. We also provide sensor devices and are a wholesaler of various air filters and digital, analog, and quantum light meter systems.

 

For the three months ended March 31, 2021 and 2020, we generated significant amount of our revenue from sales of a broad selection of agricultural sensors and measurement equipment which is currently our primary business.

 

Our Current Products Include:

 

Products we are currently selling

 

We are also a wholesaler of various digital, analog, and quantum light meters and filtration products, including fan speed adjusters, carbon filters and HEPA filtration systems. We source these products from manufacturers in China and then sell them to a major U.S. distributor, Hydrofarm, who resells our products directly to consumers through retail distribution channels and in some cases, places its own branding on our products.

 

 

 4 

 

 

Specifically, we sell the following products:

 

Fan speed adjuster device. We provide a fan speed adjuster device to our client Hydrofarm. Designed specifically for centrifugal fans with brushless motors, our adjuster device helps ensure longer life by preventing damage to fan motors by adjusting the speed of centrifugal fans without causing the motor to hum. These devices are rated for 350 watts max, have 120VAC voltage capacity and feature an internal, electronic auto-resetting circuit breaker.

  

 

Our Fan Speed Adjuster Device

  

Carbon filter devices. We sell two types of carbon filter devices to our client Hydrofarm. These carbon filter devices are professional grade filters specifically designed and used to filter air in greenhouses that might be polluted by fermenting organics. One of these filters can be attached to a centrifugal fan to scrub the air in a constant circle or can be attached to an exhaust line as a single pass filter, which moves air out of the growing area and filters unwanted odors and removes pollens, dust, and other debris in the air. The other filter is designed to be used with fans from 0-6000 C.F.M.

 

 

Our Carbon Filter Device

 

HEPA filtration device. We provide a high-efficiency particulate arrestance (“HEPA”) filtration device at wholesale prices to our client Hydrofarm. Manufactured, tested, certified, and labeled in accordance with current HEPA filter standards, this device is targeted towards greenhouses and grow rooms and designed to keep insects, bacteria, and mold out of grow rooms. We sell these devices in various sizes.

 

 

Our HEPA Filtration Device

 

 

 5 

 

 

Digital light meter. We provide a handheld digital light meter that is used to measure luminance in fc units, or foot-candles.

 

 

Our Digital Light Meter Device

 

Quantum par meter. We provide a handheld quantum par meter used to measure photosynthetically active radiation (“PAR”). This fully portable handheld PAR meter is designed to measure PAR flux in wavelengths ranging from 400 to 700 nm. It is designed to measure up to 10,000 µmol.

 

 

Our Quantum Par Meter Device

  

Strategy behind the AVX Acquisition

 

On March 15, 2019, the Company completed a transaction with Patrick Calderone to purchase 100% of the outstanding stock of AVX, an IoT installation and management company based in southern California.

 

Through our acquisition of AVX, we are planning to offer ordinary families an entire smart home product line at a fraction of the current market price. We have finished the design of smart lighting control, air conditioner, sprinkler, garden light control, garage door control and heating control. We are developing a swimming pool control device, smoke detector and carbon monoxide monitor. We believe these product lines could be completed by the end of 2021.

 

 

 6 

 

 

Ubiquitor Wireless Universal Sensor Device

 

Our USIP technology is an advanced software and hardware integrated instrumentation platform that uses a large-scale modular design approach. The large-scale modular design approach subdivides instruments into a foundation component (a USIP) and architecture-specific components (sensor nodes), which together replaces the functions of traditional instruments at a fraction of their cost. The USIP has an open architecture, incorporating a variety of individual instrument functions, sensors, and probes from different industries and vendors. The platform features the ability to connect potentially thousands of different sensors or probes, addressing major limitations present in traditional instrumentation systems. We believe the platform represents a technological advancement in the IoT marketplace by integrating large numbers of technologies, including cloud technology, wired and wireless communication technology, software programming, instrumentation technology, artificial intelligence, PLC, and sensor networking into a single platform. The result of such integration is a smaller, cheaper and faster circuit system design than those currently offered in the instrumentation market.

 

The USIP, which is compatible with a significant percentage of the instruments currently manufactured, consists of universal and reusable hardware and software. The universal hardware in the USIP is (i) a smartphone, computer, or any mobile device capable of running our software that includes a display and either hardware controls or software control surfaces, and (ii) our Ubiquitor, which is designed to be the universal data logger that acts as a bridge between the computer or mobile device and the sensor nodes. We call our flagship USIP device the “Ubiquitor” due to its ability to measure and test a variety of electrical and physical phenomena such as voltage, current, temperature, pressure, sound, light, and humidity—both wired and wirelessly.

 

We have created and assembled prototype models of the Ubiquitor in limited quantities and plan to expand our assembly in 2021. Our prototype Ubiquitor is compatible with standard desktop computers running either Windows OS or MacOS and Android- or iOS-based mobile devices and acts as a conduit that communicates with a group of sensors or probes manufactured by different vendors in a manner that requires the user to have little or no knowledge of their unique specifications. The data readout is displayed on the computer or mobile device display in application software we have created for use with a Windows PC and are creating for use with a Mac. We are designing the application software (the “App”) to have a graphical representation of control and indicator elements common in traditional tangible instruments, such as knobs, buttons, dials, and graphs, etc. Utilizing the Ubiquitor and the App, users and instrument manufacturers will be free to add, remove or change a sensor module for their special industrial or educational application without needing to create their own application software and design their own hardware. Our developers are designing and implementing a soft control touch screen interface that supports real-time data monitoring and facilitates instrument control and operation.

 

Recently, the Company has devoted a substantial number of resources to research and development to bring the Ubiquitor and its App to full production and distribution. We anticipate that the sales and marketing involved with bringing the Ubiquitor to market will require us to hire a number of new employees in order to gain traction in the market. We intend to introduce the Ubiquitor in smart home installations to reduce costs and increase functionality, as well as implement the Ubiquitor device in greenhouses and other agricultural warehouses that require regulation of light, humidity, moisture, and other measurable scientific units required to create optimal growing conditions.

 

Our universal smart development protocol focuses not only on the design of the hardware and software modules but also on the design of the overall universal smart instruments system, guided by the principles of structure, universality and modularity.

 

Our Ubiquitor device is a fully modular system with a universal sensor node and gateway system that uses a computer or mobile device as the output display module responsible for displaying the readings of various sensor nodes. We have completed an initial production run of prototype Ubiquitor devices and intend to proceed into full-scale production. The Ubiquitor’s sensor analytics system integrates event-monitoring, storage and analytics software in a cohesive package that provides a holistic view of the sensor data it is reading.

 

 

 7 

 

 

The physical hardware consists of:

 

  1. The sensor nodes, which come in hundreds of different varieties of sensor instruments in the form of a USB stick, with both male and female ports; and

 

  2. The Ubiquitor as the main hardware gateway, which is a small cell phone-sized device with integrated circuits.

 

 

We believe the Ubiquitor device can connect up to thousands of potential sensor nodes, and integrate data using embedded software to display the data and all analytics onto a digital screen (desktop, smartphone or mobile device displays) using a Wi-Fi connection. As disclosed in our patent application, we have already tested up to 256 sensor instrument readouts. Most types of nodes and probes can connect to the hardware. If the sensor size is bigger than the standard probe size, it is possible to simply use a USB cable to connect the probe and the hub. All data and analytics are displayed on a single screen, with tools that record and keep track of all measurements, and sort and display analytic information in easy-to-read charts.

 

 

The Ubiquitor is a general platform that collects data in real time, up to 100 Hz per second; and thus, is intended to be adapted to many industrial uses.

 

By using the universal hardware or USIP, we believe we could achieve the following efficiencies in instrumentation systems:

 

  1. Cut production costs. Smartphone technology is widely used on the small sensor device market. By utilizing smartphone technology, the Ubiquitor will add superior functionality and performance, improve the product’s quality and cut production costs.

 

  2. Reduce the effort required to develop a new sensor product. With the Ubiquitor, we believe that there will be no need for device manufacturers to research and develop new monitoring and operating components because they will just need to develop new sensor nodes or probes that may be integrated into our software technology.

 

  3. Reduce clutter. It is anticipated that the Ubiquitor could dispense with some of the hassle of connecting cables, since the Ubiquitor allows wireless transmission of sensor data and may allow wireless access to networks, such as a PLC network.

 

We have not yet started research and development of a second generation Ubiquitor device, but once we demonstrate the market for this product, we intend to begin such research and development. Currently our research and development is focused on concepts we can implement in the current first generation Ubiquitor device.

 

 

 8 

 

 

Research and Development Efforts of Power Line Communication

 

Power Line Communication (“PLC”) is a communication technology that enables sending data over existing power cables. One advantage of this technology is that PLC does not require substantial new investment for its communications infrastructure. Rather, PLC utilizes existing power lines, thereby forming a distribution network that already penetrates all residential, commercial and industrial premises. Accordingly, connectivity via PLC is potentially the most cost-effective, scalable interconnectivity approach for the IoT. We believe PLC can be an integral part of our communication infrastructure for the IoT, which enables reliable, real-time measurements, monitoring and control. A large variety of appliances may be interconnected by transmitting data through the same wires that provide electrical energy.

 

Wireless networks allow multiple users to access large amounts of information without the hassle of running wires to and from each IoT device (See “Risk Factors” above). The 5G cellular network, for example, promises exciting advances for telecommunication service providers, but the implementation of the 5G network will be challenging. The implementation will require building out dense, low-latency edge networks in ways that are affordable, secure and easily maintainable. 5G antennas will be able to handle more users and to transmit more data, but they will have a shorter transmission range. 5G networks will also require frequencies of up to 300 GHz. This requirement means wireless carriers will need to bid for the costly higher spectrum bands to roll out their respective 5G networks. Generally speaking, wireless networks are typically slower and more expensive than existing wired networks and extremely susceptible to interference from radio signals, radiation, walls and other forms of interference. Additionally, wireless networks may be accessed by any device within range of the network’s signal, making the information transmitted on a wireless network susceptible to access by unauthorized recipients. We are currently developing a wired alternative to wireless networks that utilizes installed power lines to transmit information. Our PLC technology uses an ultra-narrow band spectrum channel of less than 1 KHz to establish a long-distance link between transmitter and receiver. Thus, we believe that our proprietary ultra-narrow band PLC technology will offer a promising alternative to wireless networks and provide the backbone communication infrastructure for IoT devices.

 

PLC has been around for many years, leading some to believe that it is a mature technology. Current leaders in the industry include Siemens (Germany), Netgear (US), ABB (Switzerland), Ametek (US), Schneider Electric (France), General Electric (US), TP-Link Technologies (China), D-Link (Taiwan), Landis+Gyr (Switzerland), and Nyx Hemera Technologies (Canada).

 

The primary design goal of the power line network is electric power distribution, not data transmission. Consequently, although PLC is an established technology, the harsh electrical noise present on power lines and variations in equipment and standards make communications over the power grid difficult and present a number of fundamental challenges for data transfer. Signals propagating along the power line are subjected to very large amounts of noise, attenuation, and distortion that make them erratic, with several attributes varying over time. PLC is susceptible to noise from devices linked to the power supply infrastructure, for example, fluorescent tube lights, drills, hair dryers, microwave ovens, computers, switch mode power supply, cellphone chargers, dimmers, refrigerators, televisions, washing machines, and vacuum cleaners. All the trials of PLC technology appear to have resulted in power companies and internet service providers deciding that the technology is not viable as a means of delivering broadband internet access. These technological challenges have impeded, or even halted, progression of PLC technology.

 

We are performing research and development with the intention of inventing our own ultra-narrow band PLC technology that attempts to tackle two challenges: 1) overcoming interference caused by electronic noise on the power line system; and 2) bandwidth. Preliminary internal testing suggests that we have achieved noise rejection and interference suppression at five orders of magnitude better than traditional PLC technology. We believe our ultra-narrow band PLC technology shows robustness against noise and interference, based on our internal testing where we found no detectable interference occurring when six industrial blowers, notorious for causing electrical noise, and a large air conditioning unit were connected to an electrical line passing a control signal. By comparison, a small air dryer is able to cause interference in legacy PLC systems. State of the art PLC technologies developed by other companies may offer sufficient bandwidth, but they cannot effectively deal with the interference of electric noise on the system. However, in our preliminary internal testing, we have been able to increase bandwidth to 4 megabits per second with the potential for more, while simultaneously effectively dealing with electrical noise and interference. Furthermore, such data transfer rates were delivered at a bandwidth of less than 1000 Hz, thereby achieving a bandwidth efficiency (measured as bits per second per Hz) greater than 4000. For comparison purposes, 4G cellular networks have a bandwidth efficiency of less than 6 due to their requirement of larger bandwidth resources. The demand for bandwidth resources will only grow with the upcoming 5G and proposed 6G networks. Accordingly, further research of our PLC technology is warranted as it shows promise for increased data transfer rates at a lower cost than either of the 5G and proposed 6G networks, particularly given such networks’ requirements for costly new infrastructure and bandwidth resources. Based on the promising results of our internal testing, we have begun designing a proprietary PLC microchip and have set an intended launch date for 2021.

  

 

 

 9 

 

 

We believe that because residential and commercial structures already include multiple power outlets, the power line infrastructure represents an excellent network to share data among intelligent devices, particularly in the smart home installations that we are currently performing through AVX. Using PLC technology would mean that the requirement for costly ethernet cable networks to carry network information could be eliminated, as the same signals may be carried on the existing power lines.

 

We plan to leverage the communications technology of PLC to enhance the Ubiquitor and make the Ubiquitor a central component of the smart home and gardening systems we are currently developing. The goal would be that our Ubiquitor would be used to send or receive control signals from a smart device, and control hundreds of devices in near real time. We intend to apply the same concept to commercial and industrial applications.

 

Also, we plan to design a full line of products for the gardening industry by integrating the Ubiquitor device into a gardening system. The system would include a light control node, temperature sensor, humidity sensor, digital light sensor, quantum PAR sensor, pH sensor, total dissolved solids (“TDS”) sensor and carbon dioxide sensor design. We believe the combination of these sensors would offer the same features as a combination of dozens or even hundreds of different instruments in the gardening industry. The Ubiquitor would be used to replace these devices and could offer another case study of the effectiveness of the application of universal smart technology to such systems.

 

The development of universal smart instruments and the IoT have a considerable amount of overlap, with the only difference being the number of sensor nodes involved. We plan to take advantage of this overlap and unify universal smart instruments and the IoT into a single system, building the IoT infrastructure for both residential and commercial uses and charging monthly subscription fees. End users will be able to plug any peripheral devices into the power outlet and enjoy the IoT connectivity throughout their home.

 

Eventually, we hope to establish five divisions to bring our technology together: 1) AVX with new shared distributed smart home products powered by the Ubiquitor; 2) an IT division in software machine design; 3) Universal Smart Instrumentation; 4) PLC; and 5) an IoT division.

 

Intellectual Property Protection

 

On November 4, 2016, we filed a U.S. patent application number 15/344,041 with the USPTO. On March 5, 2018, we issued a press release announcing that the USPTO published an Issue Notification for U.S. Patent Application No. 9924295 entitled “Universal Smart Device,” which covers a patent application regarding the Company’s Universal Smart Device. The patent was issued on March 20, 2018.

 

Subsequent to our internal research and development efforts, we filed with the USPTO on June 2, 2017 a patent application regarding a process for improving a spectral response curve of a photo sensor. The small and cost-effective multicolor sensor and its related software protected by the patent we believe could achieve a spectral response that approximates an ideal photo response to take optical measurement. The patent was issued on February 26, 2019.

 

In addition, we have been notified that the USPTO published a notice of allowance for a patent application we filed on March 12, 2018 as application No. 15/925,400. The patent title is a “Universal Smart Device,” which is a universal smart instrument that unifies heterogeneous measurement probes into a single device that can analyze, publish, and share the data analyzed. The issue fee was paid on March 14, 2019.

 

On November 29, 2019, the Company filed an international utility patent application filed through the patent cooperation treaty as application PCT/US2019/63880. In April 2020, the Company was notified that it received a favorable international search report from the International Searching Authority regarding this patent application, which patents the Company’s PLC technology. The World International Property Organization report cited only three category “A” documents, indicating that the Company’s application met both the novelty and non-obviousness patentability requirements. Consequently, the Company is optimistic that the patent covering the claims for its PLC technology will be issued in due course and will allow the Company to implement strong protections on the PLC technology worldwide.

 

 

 10 

 

 

Competitors

 

There are several competitors we have identified in the wireless sensor node industry, including traditional instruments or devices manufacturers such as Hanna Instruments and Extech Instruments.

 

Hach developed and launched the SC1000 Multi-parameter Universal Controller, a probe module for connecting up to 32 digital sensors or analyzers. However, their products are not compatible with smart phones yet; and we believe their price point is still prohibitive to consumers.

 

Monnit Corporation offers a range of wireless and remote sensors. Many of Monnit’s products are web-based wireless sensors that usually are not portable because of their power consumption. Also, the sensors’ real-time updates are slow; and we believe security of the web-based sensor data acquisition also may be a concern. In addition to purchasing the device, consumers usually have to pay monthly fees for using web-based services.

 

We are not trying to compete with traditional instruments or device manufacturers because we utilize our Ubiquitor device in conjunction with our smartphone application, which we believe will be a completely different product category.

 

Market Potential

 

We believe that wireless universal smart technology will play a critical role for traditional instrument manufacturers, as it is too expensive and difficult to develop for medium or smaller companies. The cost factor is the first consideration when deciding whether a company wants to develop smart wireless technologies and implement them in their products or use them in their field testing. We also hope to play a role in academic laboratories, particularly with smaller academic laboratories who are sensitive to price.

 

Results of Operations

 

For the three months ended March 31, 2021 compared to the three months ended March 31, 2020

 

Revenue, Cost of Sales and Gross Profit

 

Our consolidated gross revenue for the three months ended March 31, 2021 and 2020 was $363,463 and $310,609, respectively, which included revenue from related parties of $10,191 and $14,672, respectively. Revenue for the three months ended March 31, 2021 increased $52,854 due to sales increase to new client of Perfecular, resulting in gross profit of $71,200 and gross loss of $27,463 for the three months ended March 31, 2021 and 2020, respectively.

 

Operating Costs and Expenses

 

The major components of our operating expenses for the three months ended March 31, 2021 and 2020 are outlined in the table below:

 

   For the three months ended March 31, 2021   For the three months ended March 31, 2020   Increase
(Decrease)
$
 
Selling expense  $512   $15,070   $(14,558)
Officer compensation   39,100    34,000    5,100 
Research and development   63,150    70,396    (7,246)
Professional fees   377,547    433,539    (55,992)
General and administrative   310,084    389,813    (79,729)
Total operating expenses  $790,393   $942,818   $(152,425)

 

Selling expense for the three months ended March 31, 2021 was $512, compared to $15,070 for the three months ended March 31, 2020. Selling expense incurred was mainly from third party advertising fees. The decrease of selling expense was due to a decrease in advertising fees.

 

 

 11 

 

 

Officer compensation was $39,100 and $34,000 for the three months ended March 31, 2021 and 2020, respectively. The increase was due to an adjustment of the Chief Financial Officer’s compensation.

 

Research and development costs were $63,150 and $70,396 for the three months ended March 31, 2021 and 2020, respectively. The decrease was due to additional supplies needed for the research and development work in 2020 which was no longer needed in 2021.

 

Professional fees were $377,547 during the three months ended March 31, 2021 compared to $433,539 during the three months ended March 31, 2020. The decrease was due stock option fee in 2021 compared to prior period.

 

General and administrative expenses of $310,084 incurred during the three months ended March 31, 2021 primarily consisted of salaries of $136,483, insurance expense of $42,579 and depreciation expense of $40,537. General and administrative expenses of $389,813 incurred during the three months ended March 31, 2020 primarily consisted of salaries of $147,621, insurance expense of $85,005 and depreciation expense of $40,596. The decrease was due to decreased salaries and insurance premiums. Salary expense decreased due to decrease number of employees. Insurance expenses decreased due to decrease health insurance and workers compensation insurance.

 

Net Losses

 

During the three months ended March 31, 2021 and 2020, we incurred net losses of $682,516 and $922,306 respectively, due to the factors discussed above.

 

Liquidity and Capital Resources

 

Working Capital

 

   March 31,
2021
   December 31,
2020
 
Current Assets  $2,318,892   $1,007,630 
Current Liabilities   (762,504)   (527,559)
Working Capital  $1,556,388   $480,071 

 

Cash Flows

 

The table below, for the periods indicated, provides selected cash flow information:

 

   For the three months ended March 31, 2021   For the three months ended March 31, 2020 
Net cash used in operating activities  $(438,775)  $(649,587)
Net cash used in investing activities        
Net cash provided by (used in) financing activities   1,763,697    (50,000)
Net change in cash  $1,324,922   $(699,587)

 

Cash Flows from Operating Activities

 

Our net cash outflows from operating activities of $438,755 for the three months ended March 31, 2021 was primarily the result of our net loss of $682,516 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes an increase in accounts receivable of $165,725, decrease in inventory of $20,975, decrease in prepaid expenses of $53,340, decrease in deposits of $100,000, increase in accounts payable and accrued liabilities of $142,464, decrease in accounts payable – related party of $17,471, and decrease in customer deposit of $53,450. Non-cash expense included add-backs of $8,357 in bad debt expense, $3,287 in reduction of inventory reserve, $40,537 in depreciation expense, net of $837 in amortization of right-of-use assets, $12,000 in stock-based compensation, and $106,838 in stock option compensation.

 

 

 12 

 

 

Our net cash outflows from operating activities of $649,587 for the three months ended March 31, 2020 was primarily the result of our net loss of $922,306 and changes in our operating assets and liabilities offset by the add-back of non-cash expenses. The change in operating assets and liabilities includes increase in accounts receivable of $94,161, increase of accounts receivable – related party of $23,977, increase in inventory of $14,437, decrease in prepaid expenses of $6,634, increase in accounts payable and accrued liabilities of $123,969, decrease in other current liabilities of $12,334, decrease in interest payable – related party of $1,750, and decrease in customer deposit of $22,984. Non-cash expense included add-backs of $189 in inventory reserve, $40,598 in depreciation expense, $12,000 in stock-based compensation, $259,350 in stock option compensation, and net of $378 in amortization of right-of-use asset. 

 

We expect that cash flows from operating activities may fluctuate in future periods as a result of a number of factors, including fluctuations in our net revenues and operating results, utilization of new revenue streams, collection of accounts receivable, and timing of billings and payments.

 

Cash Flows from Investing Activities

 

There were no investing activities for the three months ended March 31, 2021 and 2020.

 

Cash Flows from Financing Activities

 

For the three months ended March 31, 2021 the Company obtained $267,297 in SBA loan, received $1,500,000 in bank loan, and repaid $3,600 in bank loan, resulting in cash inflow of $1,763,697. For the three months ended March 31, 2020 the Company paid off a promissory note, resulting cash outflow of $50,000. 

 

Going Concern 

 

In the long term, the continuation of the Company as a going concern is dependent upon the continued financial support from its shareholders, the ability of the Company to repay its debt obligations, to obtain necessary equity financing to continue operations, and the attainment of profitable operations. For the period ended March 31, 2021, the Company had a net loss of $682,516 and negative cash flow from operating activities of $438,775. In Q1, 2021 the Company has obtained a $1,500,000 loan from a financial institution and has a $1,500,000 loan commitment from a private related party. The loan from the financial institution requires monthly payments with the final payment due in 2026. The related party loan will accrue interest at 10% until March 15, 2022, or six months from the date the loan is funded, whichever is later (the “Initial Interest Accrual Date”). Interest on any unpaid principal after Initial Interest Accrual Date shall accrue at a fixed rate of 12% per annum until paid. The Company reserves the right to prepay this loan agreement (in whole or in part) after 6 months of the first day with no prepayment penalty. The Company may make, in its sole discretion, payments of interest only, or interest and principal, provided that the principal is not paid in full prior to six months from the date the loan is funded. The Company also plans to raise $10 million through an underwritten public offering in 2021.

 

With the January 1, 2021 beginning cash amount of $585,325 and the loan of $1,500,000, the Company will have enough cash to cover its projected annual cash burn rate of $1,967,074. With the additional $1,500,000 related party loan, the Company will have adequate reserves to continue operations in 2021 and 2022. The related party which will provide the loan to the Company is owned by a director of the Company, which we have evaluated to be a reliable source of cashflow. The $10 million planned public offering will contribute to a projected December 31, 2021 cash balance of $11,000,000. Historically, the Company has been successful in reaching planned its fund-raising targets.

 

In 2020 the Company had negative operating cashflow of approximately $1.96 million, mainly resulting from net loss. The Company is currently developing its products and licenses and expects to generate profit once the products and licenses available for the market, which will begin to alleviate the negative cashflow. Currently, the Company is testing 4 Mbps ultra-narrowband power line communication printed circuit boards, the testing is expected to complete in Q2 2021. The ultra-narrowband power line communication products will launch in Q4, 2021. The portable universal smart device is also in the final printed circuit board layout stage, the Company is planning to launch this product in Q4 2021. Initially, new products would require cash to manufacture and promote. The Company expects to begin generating positive cashflow with the launch of above-mentioned products from Q2 of 2022.

 

 

 13 

 

 

Overall, we expect that with the loan we obtained, along with the committed related-party loan, and planned capital raising will provide adequate cash for the Company to continue operation as a going concern throughout 2021 and 2022. The Company expects the loans and offering will generate cash for 2021’s operation and be able to pay off the loans obtained through the offering with sufficient cashflow for 2021 and 2022. Thus, the previous factors raising substantial doubt to continue as a going concern have been alleviated.

 

Off-Balance Sheet Arrangements

 

As of March 31, 2021, we did not have any off-balance-sheet arrangements, as defined in Item 303(a)(4)(ii) of Regulation SK.

 

ITEM 3.  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.

 

We are a smaller reporting company as defined by Rule 12b-2 of the Exchange Act and are not required to provide the information required under this item.

  

ITEM 4.  CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls

 

Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we have conducted an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures, as defined in Rules 13a15(e) and 15d15(e) under the Securities and Exchange Act of 1934, at the end of the period covered by this report. Based on this evaluation, our principal executive officer and principal financial officer concluded as of the evaluation date that our disclosure controls and procedures were effective such that the material information required to be included in our Securities and Exchange Commission reports is recorded, processed, summarized and reported within the time periods specified in SEC rules and forms relating to our company, particularly during the period when this report was being prepared.

 

Our management concluded we did not maintain effective controls over the Company’s financial reporting. The material weaknesses in our internal control over financial reporting, caused principally by inadequate staffing and technical expertise in key positions, resulted in overly relying on outside consultants to make numerous adjustments to our financial statements. Additionally, the significant deficiencies or material weaknesses could result in future material misstatement of the consolidated financial statements that would not be prevented or detected. Management has concluded that the identified control deficiencies constitutes a material weakness.

 

Changes in internal control over financial reporting.

 

There were no changes in our internal control over financial reporting during our most recent fiscal quarter that materially affected, or were reasonably likely to materially affect, our internal control over financial reporting.

 

Limitations on the Effectiveness of Internal Controls

 

Disclosure controls and procedures, no matter how well designed and implemented, can provide only reasonable assurance of achieving an entity's disclosure objectives. The likelihood of achieving such objectives is affected by limitations inherent in disclosure controls and procedures. These include the fact that human judgment in decision-making can be faulty and that breakdowns in internal control can occur because of human failures such as simple errors or mistakes or intentional circumvention of the established process.

 

 

 14 

 

 

 

PART II.  OTHER INFORMATION

 

ITEM 1.  LEGAL PROCEEDINGS

 

We were not subject to any new legal proceedings during the three months ended March 31, 2021 and there are currently no new legal proceedings, to which we are a party, which could have a material adverse effect on our business, financial condition or operating results.

 

ITEM 1A.  RISK FACTORS

 

We are a smaller reporting company as defined by Rule 12b-2 of the Securities Exchange Act of 1934 and are not required to provide the information under this item.

 

ITEM 2.  UNREGISTERED SALES OF EQUITY SECURITIES AND USE OF PROCEEDS.

 

No shares or common stock were sold during the three months ended March 31, 2021. 

  

ITEM 3.  DEFAULTS UPON SENIOR SECURITIES

 

No senior securities were issued and outstanding during the three-month periods ended March 31, 2021 or 2020.

 

ITEM 4.  MINE SAFETY DISCLOSURES

 

Not applicable to our Company.

 

ITEM 5.  OTHER INFORMATION

 

Our common stock has been quoted on the OTCQB and on the OTC Link since July 31, 2014 under the symbol “FCUV”. 

  

ITEM 6.  EXHIBITS AND REPORTS ON FORM 8-K

 

Exhibits

 

The following financial information is filed as part of this report:

 

(a)   (1) FINANCIAL STATEMENTS
   
  (2) SCHEDULES
   
  (3) EXHIBITS. The following exhibits required by Item 601 to be filed herewith are incorporated by reference to previously filed documents:

 

Exhibit

Number

Description
   
10.1   Promissory Note with Chase Bank, dated March 10, 2021 for $108,750 SBA Loan, as filed with the SEC on March 23, 2021.
10.2   Secured Promissory Note with East West Bank, dated January 8, 2021 for $1,500,000, as filed with the SEC on March 23, 2021.
10.3   Loan Agreement with Golden Sunrise Investment LLC, dated March 15, 2021 for $1,500,000, as filed with the SEC on March 23, 2021.
10.4   Company Guarantee Agreement with Golden Sunrise Investment LLC dated March 15, 2021, as filed with the SEC on March 23, 2021.
10.5   Secured Promissory Note with Golden Sunrise Investment LLC dated March 15, 2021 for $1,500,000, as filed with the SEC on March 23, 2021.
31.1   Certification of CEO pursuant to Sec. 302
31.2   Certification of CFO pursuant to Sec. 302
32.1   Certification of CEO pursuant to Sec. 906
32.2   Certification of CFO pursuant to Sec. 906
     
101.INS   XBRL Instances Document
101.SCH   XBRL Taxonomy Extension Schema Document
101.CAL   XBRL Taxonomy Extension Calculation Linkbase Document
101.DEF   XBRL Taxonomy Extension Definition Linkbase Document
101.LAB   XBRL Taxonomy Extension Label Linkbase Document
101.PRE   XBRL Taxonomy Extension Presentation Linkbase Document

 

 

 15 

 

 

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

  Focus Universal Inc.
       
Dated: May 10, 2021 By:  

/s/ Desheng Wang

Desheng Wang

Chief Executive Officer

       
Dated: May 10, 2021 By:  

/s/ Duncan Lee

Duncan Lee

Chief Financial Officer

 

 

 

 

 

 

 

 

 

 16