Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex32_2.htm
EX-32.1 - EXHIBIT 32.1 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex32_1.htm
EX-31.2 - EXHIBIT 31.2 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex31_2.htm
EX-31.1 - EXHIBIT 31.1 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex31_1.htm
EX-23.1 - EXHIBIT 23.1 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex23_1.htm
EX-21.1 - EXHIBIT 21.1 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex21_1.htm
EX-4.11 - EXHIBIT 4.11 - UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.ex4_11.htm

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

þAnnual Report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934:

For the fiscal year ended:   December 29, 2019

 

Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934:

For the transition period from:

 

000-50081

(Commission File Number)

 

Uniroyal Global Engineered Products, Inc.

(Exact name of registrant as specified in its charter)

 

Nevada

(State or other jurisdiction of incorporation or organization)

 

65-1005398

(I.R.S. employer identification number)

 

1800 2nd Street Suite 970

Sarasota, Florida 34236

(Address of principal executive offices)

 

(941) 906-8580

(Registrant’s telephone number)

 

Securities registered under Section 12(b) of the Act:   None.

 

Securities registered under Section 12(g) of the Act:   Common Stock, $0.001 par value per share.

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes   No þ

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.  

 

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   Yes þ   No

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).   Yes þ   No

 

 1 
 

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act):   Yes   No þ

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or, an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer”, “smaller reporting company”, and “emerging growth company”, in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   Accelerated filer
Non-accelerated filer þ    Smaller reporting company þ
Emerging growth company     

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act.  

 

As of June 30, 2019, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was approximately $8,327,709. 

 

As of March 2, 2020, the registrant had 3,412,186 shares of ordinary common stock, $0.001 par value and 323,820 shares of Class B Common Stock, $0.001 par value, outstanding.

 

 

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the Uniroyal Global Engineered Products, Inc. definitive 2020 Proxy Statement, to be filed with the Securities and Exchange Commission within 120 days after the close of the fiscal year ended December 29, 2019, are incorporated by reference into Part III of this Form 10-K.

 

 

 2 
 

 

TABLE OF CONTENTS

 

    Page
Part I  
Item 1 Business 4
Item 1A Risk Factors 9
Item 1B Unresolved Staff Comments 9
Item 2 Properties 10
Item 3 Legal Proceedings 10
Item 4 Mine Safety Disclosures 10
   
Part II  
Item 5 Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 11
Item 6 Selected Financial Data 12
Item 7 Management’s Discussion and Analysis of Financial Condition and Results of Operations 12
Item 7A Quantitative and Qualitative Disclosures about Market Risk 18
Item 8 Financial Statements 19
Item 9 Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 54
Item 9A Controls and Procedures 54
Item 9B Other Information 55
   
Part III  
Item 10 Directors, Executive Officers and Corporate Governance 55
Item 11 Executive Compensation 56
Item 12 Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 56
Item 13 Certain Relationships and Related Transactions, and Director Independence 56
Item 14 Principal Accounting Fees and Services 56
     
Part IV  
Item 15 Exhibits, Financial Statements Schedules 57
     
Signature Page 58
   
Index to Exhibits 60

 

 3 

 

PART I

 

Note regarding forward-looking statements:

 

Except for statements of historical fact, certain information contained herein constitutes forward-looking statements including, without limitation, statements containing the words “believes,” “anticipates,”  “intends,” “expects,” and words of similar import, as well as all references to future results. Such forward-looking statements involve known and unknown risks, uncertainties and other factors which may cause the actual results or achievements of Uniroyal Global Engineered Products, Inc. to be materially different from any future results or achievements expressed or implied by such forward-looking statements. Such factors include, but are not limited to, the following: risks involved in implementing our business strategy, our ability to obtain financing on acceptable terms, competition, our ability to manage growth, pricing and availability of equipment, materials and inventories, performance issues with suppliers, economic growth, the Company’s ability to successfully integrate acquired operations, currency fluctuations, risks of technological change, the effectiveness of cost-reduction plans, our dependence on key personnel, our ability to protect our intellectual property rights, risks of new technology and new products, and government regulation. All forward-looking statements are qualified in their entirety by this cautionary statement, and the Company undertakes no obligation to revise or update any such forward-looking statements to reflect events, developments or circumstances after the date hereof.

 

ITEM 1.BUSINESS

 

On November 10, 2014, Uniroyal Global Engineered Products, Inc. (“Uniroyal Global”, the “Company”, “we”, “our”, or “us”) acquired all of the ownership interests in Uniroyal Engineered Products, LLC (“Uniroyal”), a U.S. manufacturer of textured coatings, and all of the ordinary common stock of Uniroyal Global (Europe) Limited (“UGEL”, formerly known as Engineered Products Acquisition Limited (“EPAL”)), the holding company for Uniroyal Global Limited (formerly known as Wardle Storeys (Earby) Limited (“Wardle Storeys”)), a European manufacturer of textured coatings and polymer films. Management of the acquired entities was not altered in the acquisitions.

 

Uniroyal Global made the acquisition of Uniroyal through a newly formed subsidiary, UEP Holdings, LLC (“UEPH”), to which it contributed certain of its assets and liabilities as part of the organization of that subsidiary. The aggregate purchase consideration paid for 100% of the outstanding equity of Uniroyal was preferred ownership interests issued by UEPH having an aggregate face value of $35 million. In a separate transaction, Uniroyal Global also purchased UGEL for aggregate consideration of 100 shares of Uniroyal Global’s Common Stock and Uniroyal Global’s guaranty of outstanding UGEP preferred stock retained by the seller having a face value of £12,518,240 (approximately $20 million at closing). 

 

On January 27, 2020, the Company announced a one-for-five reverse stock split on its common stock that became effective on February 24, 2020. Share and per share amounts have been adjusted to give effect to the reverse stock split. Adjusted for the reverse stock split, basic and diluted loss per share were $0.58 for the year ended December 29, 2019 and $0.50 for the year ended December 30, 2018. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split.

 

We are a manufacturer and seller of vinyl coated fabric products that have excellent high performance characteristics and capabilities and derive our revenue principally through our subsidiaries Uniroyal and Uniroyal Global Limited.   Our coated fabric products are durable, stain resistant, easily processed, cost-effective and better performing than traditional leather or fabric coverings.  Our products are frequently used in applications that require rigorous performance characteristics such as automotive and non-automotive transportation, certain indoor/outdoor furniture, commercial and hospitality seating, healthcare facilities and athletic equipment.   In the automotive industry our products are used primarily in seating, door panels, head and arm rests, security shades and trim components, including instrument panels, door casings, seating, gear lever and steering column gaiters, headliners and load space covers.  Non-automotive applications include outdoor seating for utility and sports vehicles, and sheeting used in medical and toxic hazard protection, personal protection, moisture barriers, pram and nursery equipment, movie screen and decorative surface applications. Our primary brands names include Naugahyde®, BeautyGard®, Flame Blocker™, Spirit Millennium®, Ambla®, Amblon®, Velbex®, Cirroflex®, Plastolene® and Vynide®.

 

We are the successor to a long line of businesses that have manufactured vinyl coated fabrics.  Our best known brand, Naugahyde, is the product of many improvements on an original rubber-coated fabric developed a century ago in Naugatuck, Connecticut.  We design, manufacture and market a wide selection of vinyl coated fabric products under a portfolio of recognized brand names.   We believe that our business has continued to be a leading supplier in its marketplace because of our ability to provide specialized materials with high performance characteristics often customized to the end-user specifications and complemented by comprehensive technical and customer support.

 

 4 

 

Our Principal Products and Their Markets

 

Our vinyl coated fabric products have undergone considerable evolution and today are distinguished by superior performance in a wide variety of applications as alternatives to leather, cloth and other synthetic fabric coverings. Our standard product lines consist of more than 600 SKUs with combinations of colors, textures, patterns and other properties. Our products are differentiated by unique protective top finishes and surface print capabilities. Additional process capabilities include embossing grains and patterns, and rotogravure and registered printing, which imparts five color character prints as well as non-registered prints, lamination and panel cutting.

 

Our vinyl coated fabric products have various high performance characteristics and capabilities. They are durable, stain resistant, easily processed, more cost-effective and better performing than traditional leather or fabric coverings. Our products are frequently used in applications that require rigorous performance characteristics such as automotive and non-automotive transportation, certain indoor/outdoor furniture, commercial and hospitality seating, healthcare facilities and athletic equipment. We manufacture materials in a wide range of colors and textures. They can be hand or machine sewn, laminated to an underlying structure, thermoformed to cover various substrates or made into a variety of shapes for diverse end-uses.  We are a long-established supplier to the global automotive industry and manufacture products for interior trim components from floor to headliner which are produced to meet specific component production requirements such as cut and sew, vacuum forming/covering, compression molding, and high frequency welding. Some products are supplied with micro perforations, which are necessary on most compression molding processes. Materials can also be combined with polyurethane or polypropylene and foam laminated by either flame or hot melt adhesive for seating, fascia and door applications.

 

The automotive sector represented approximately 61.4% of our total sales in 2019. Our products are used primarily in the following automotive applications:

 

·seating
·door panels
·head and arm rests
·security shades
·components

 

The non-automotive transportation sector represented 17.6% of our 2019 sales and primarily consists of seating products for original equipment manufacturers of non-automotive and light truck vehicles in the following five categories:

 

·personal watercraft, ATV’s, snowmobiles, golf carts
·light and heavy industrial equipment and agricultural equipment (tractors, bulldozers)
·recreational vehicles, vans and motor homes
·heavy and medium trucks
·mass transit (trains, buses)

 

The distribution market sector represented approximately 10.1% of our 2019 sales and consists primarily of sales of the standard Naugahyde and Ambla product lines to local furniture shops, smaller furniture manufacturers and companies serving the hospitality and marine markets for refurbishing and replacement. The sales organization employed to service this market is a network of approximately 70 distributor locations.

 

 5 

 

The contract sector, which represented approximately 10.9% of our 2019 sales, includes contract furniture/upholstery, marine, healthcare, child care, and industrial equipment.

 

Products are developed and marketed based upon the performance characteristics required by end-users. For example, for recreational products used outdoors, such as boats, personal watercraft, golf carts and snowmobiles, a product designed primarily for durability and weatherability is used. We also manufacture a line of products called BeautyGard®, with water-based topcoats that contain agents to protect against bacterial and fungal microorganisms and can withstand repeated cleaning, a necessity in the restaurant and health care industries. These topcoats are environmentally friendlier than solvent-based topcoats. The line is widely used in hospitals and other healthcare facilities. Flame and smoke retardant vinyl coated fabrics are used for a variety of commercial and institutional furniture applications, including hospitals, restaurants and residential care centers and seats for school buses, trains and aircraft. We are also in the process of transitioning to the manufacture of products without flame retardant chemical additives to meet additional customer requirements.

 

We produce vinyl coated fabrics and laminated composites through a continuous cast or spread coating manufacturing process. The continuous cast method yields a material with a soft finish, deep grain pattern, wide temperature tolerance range and high malleability factor for thermoforming. In addition, we possess plastisol-compounding capability, a variety of proprietary formulations and highly versatile finishing processes. We believe that our products are differentiated in the market by unique protective topcoat finishes and adhesive back coats, as well as five color register and rotogravure printing, which imparts multiple features, character prints and non-registered prints. We also have the in-house capability to perform transfer printing as well as micro-perforation, which provides product breathability.

 

We seek to ensure that every product fully meets customer requirements of specifications, reliability and performance.

 

We believe that we maintain our market leadership position through a strong research and development effort that provides strong product development capability. This yields enhanced product characteristics, lower cost of material combinations and new proprietary product formulations. We estimate that approximately 15.5% of our sales relate to products developed to customer specifications.

 

 Our Stoughton, Wisconsin facility achieved ISO 9001:2008 status in 1999 and has renewed it annually since then. In addition, the facility achieved IATF 16949:2016 status in 2018. Our U.K. facility achieved ISO TS 16949 status in 2004 and is approved to the European Council Directive 96/98 EX on Marine Equipment as amended for Module D Production Quality.

 

We hold no patents but maintain certain of our process technologies as trade secrets.

 

Our Distribution Methods

 

 Products are developed and marketed based upon the performance characteristics required by our end-users.  We currently serve customers world-wide with 13 full-time sales persons in offices in Sarasota, Florida, Detroit, Michigan, and Earby, Lancashire, one exclusive agent in Italy, and an extensive distributor network in the U.S., the United Kingdom, Scandinavia, France, Germany and Hong Kong. 10.1% of our worldwide sales in 2019 were made through distributors. The industrial business is supported mainly from stock and via a catalogue.

 

We maintain a principal website at www.uniroyalglobal.com. We maintain websites for our U.S. non-automotive products at www.naugahyde.com and for our global/non-U.S. products at www.uniroyalglobal.co.uk and www.ambla.com.

 

 6 

 

Competition

 

We compete primarily on the basis of design, style, color, product breadth and quality, as well as price and customer service.

 

The global vinyl coated fabrics market is highly fragmented. The uses of vinyl coated fabrics include automotive, furniture, industrial, protective clothing, wall coverings, book coverings, non-automotive transportation and awnings and tents.

 

The following table sets forth product applications in the markets in which we actively compete domestically and our primary competitors in those markets.

 

Markets Key Uses Primary Competitors
Automotive

Interior components

Seating applications

Security shades

Canadian General-Tower Limited

Benecke-Kaliko AG

Hornschuch Group GmbH

Vulcaflex S.p.A.

Haartz Corporation

Griffine SA

Morbern, Inc.

Transportation

and Contract

ATV/snowmobile/PWC/golf carts

Heavy/light equipment

RVs/motor homes

Canadian General-Tower Limited

Benecke-Kaliko AG

Hornschuch Group GmbH

Vulcaflex S.p.A.

Morbern, Inc.

Spradling International Inc.

Distribution

Approximately 70 distributor and

reseller locations

OMNOVA Solutions Inc.

Spradling International Inc.

Hornschuch Group GmbH

Morbern, Inc.

Contract

Office/contract/institutional furniture

Restaurant booth

Health care

Marine

OMNOVA Solutions Inc.

Morbern, Inc.

Hornschuch Group GmbH

Alcor

Gislaved Folie AB

Griffine Enduction

 

Other Home furnishings/dinettes Spradling International Inc.

 

Raw Materials

 

The principal raw materials for our coated fabrics are casting paper, knit fabric, PVC plastic resins, pigments and plasticizers.  We have multiple sources for most of these materials.  We believe that in the few instances where we have a sole supplier we can re-engineer around the sole-sourced materials if necessary with minimal effort and cost.

 

Concentration of Customers

 

No one customer accounts for 10% or more of our consolidated revenues. Our top 25 customers account for approximately 64.9% of our total global sales. Our largest customer contributed 8.6% to our net sales in 2019.

 

 7 

 

Trademarks and Material Contracts

 

Under the standard Naugahyde and Ambla product lines, we own the following proprietary brands and trademarks among others:

 

·Naugahyde®
·All-American®
·BeautyGard®
·Chameá™
·Flame Blocker™
·Naugaform®
·NaugaSoft®
·NaugaSylk™
·Spirit Millennium®
·Ambla®
·Amblon®
·Cirroflex®
·Plastolene®
·Velbex®
·Vynide®

 

Employees

 

We believe that we maintain a stable, experienced and productive workforce, currently employing approximately 337 employees.

 

Most of our employees who are involved in the production process are located at manufacturing facilities in Stoughton, Wisconsin and Earby, England. The production employees at the Stoughton, Wisconsin facility are represented by Local 1207 of the United Steel Workers (formerly P.A.C.E.). The term of the collective bargaining agreement for Stoughton represented employees extends to March 2023. Most of the employees at our Earby facility are represented by UNITE.  The collective bargaining agreement with UNITE does not specify a termination date.

 

Fifteen executive and corporate employees work in our executive office in Sarasota, Florida.

 

Effect of Existing or Probable Government Regulations on Our Business

 

Our manufacturing processes are subject to increasingly stringent regulation by environmental, health and safety authorities. It is difficult to predict future changes in environmental, health and safety regulations on our future financial results. Continued compliance could result in significant increases in capital expenditures and operating costs. Any increase in these costs, or unanticipated liabilities, arising out of a release of regulated material, discovery of previously unknown conditions, more aggressive enforcement actions or new requirements, could adversely affect our financial results.

 

 8 

 

Research and Development

 

We are actively engaged in research and development programs designed to develop new products, manufacturing processes, systems and technologies, while reducing costs to customers and enhancing existing product lines. We believe that investment in research and development has been an important factor in establishing and maintaining our competitive position in many of the specialized niche markets in which our products are sold. Product performance capabilities and characteristics are continually adjusted to meet customer needs.

 

In-house design and innovative product development are key features of our business.  Our in-house design studio enables us to develop new designs, colors and patterns for customers and then deliver them in prototype sample form or by computer-aided design (CAD).

 

We have access to a vast range of leather and grain styles, prints and surface effects, which are constantly evolving and increasing. Further trends are captured and expressed in our own concept work and exclusive designs are developed from customer requests. Our CAD systems allow fast creation and display of design innovation. “Drape” software enables computer generated designs to be shown in situ in interiors of vehicles or other applications before the expense of production is incurred. A silicone cast surface-modeling system permits the transfer of material surface finishes, including leather and fabrics, onto vinyl foils for customer review before investment in tooling. Diverse production systems and equipment create an extensive automotive product range. Anti-stain and anti-squeak finish (ASF) are examples of product developments providing customers with cost reduction and material performance enhancements.

 

Compliance with Environmental Laws

 

We believe that we are in substantial compliance with applicable environmental laws and regulations.  We have not needed to make any material expenditure to maintain such compliance during the past two fiscal years. However, during 2018 we invested approximately $1.7 million at our Earby facility for a regenerative thermal oxidizer (RTO) to enhance the treatment of exhaust air.

 

We aim to comply with all existing regulatory legislation at European, national and local levels and adopt a positive stance in anticipating future, more stringent regulatory requirements. We endeavor to minimize waste throughout the production facilities with better utilization of raw materials, energy and water and to prevent at the source the emission of pollutants into the environment. We are committed to continual improvements in environmental performance.

 

Coronavirus

 

Subsequent to year-end 2019, the World Health Organization declared the novel coronavirus (COVID-19) outbreak a public health emergency.  There have been mandates from international, federal, state and local authorities requiring forced closures of various schools, businesses and other facilities and organizations. These forced closures could negatively impact our business.  While the closures and limitations on movement, domestically and internationally, are expected to be temporary, the duration of the supply chain disruption, and related financial impact, cannot be estimated at this time. Should the closures continue for an extended period of time or should the effects of the coronavirus continue to spread, the impact could have a material adverse effect on our financial position, results of operations and cash flows.

 

Available Information

 

The address for the Company’s web site is www.uniroyalglobal.com on which it makes available, free of charge, its Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and all amendments to the foregoing as soon as reasonably practicable after these reports are electronically filed with, or furnished to, the SEC. In addition, these reports and documents may be accessed on the SEC’s web site at www.sec.gov.

 

ITEM 1A.RISK FACTORS

 

Not applicable.

 

ITEM 1B.UNRESOLVED STAFF COMMENTS

 

None.

 

 9 

 

ITEM 2.PROPERTIES

 

We lease our production facility in Stoughton, Wisconsin (near Madison).  The term of the lease extends to October 31, 2033 with an option to renew the lease for an additional five years. This facility consists of an approximately 230,000 square foot building with production, laboratory and administrative office space and a warehouse. Our lease includes several nearby buildings used for storage. Major equipment at the production facility includes two cast coating lines, five rotogravure printers, three paper reconditioning machines, three standard embossers, one GAP embosser, one micro-perforator, nine inspection stations including duplex with automatic data collection, bulk material handling systems and warehouse bar coding and locator systems. Laboratory facilities at the Stoughton facility replicate the production floor capabilities and enhance our research and development capability.

 

We also lease our production facility in West Craven Business Park, Earby, Barnoldswick, Lancashire, England. The term of the lease extends to March 3, 2039. This facility consists of approximately 250,000 square feet.  Major equipment at the production facility includes various compound department mixers and holding tanks, three coating lines, four gravure printers, one water based printer, one embosser, three laminators, one airing-off/relaxer, one perforating process, two paneling machines, and four inspection frames.

 

During the fourth quarter of 2018, the Company decided that it would de-commission the equipment used in the calender operations at its U.K. subsidiary and, as a result, recorded a $510,230 impairment charge for the assets used in these operations. The Company decided that it would no longer offer the calendered product after determining that these operations could not be economically modernized.

 

Our executive and sales offices occupy approximately 9,010 square feet of premises in Sarasota, Florida under a lease that extends to May 31, 2023.

 

ITEM 3.LEGAL PROCEEDINGS

 

From time to time we may be a party to or be involved with legal proceedings, governmental investigations or inquiries, claims or litigation that are related to our business. We are not presently party to any legal proceedings the resolution of which we believe would have a material adverse effect on our business or financial condition.

 

ITEM 4.MINE SAFETY DISCLOSURES

 

Not applicable.

 

 10 

 

PART II

 

ITEM 5.MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

 

Market Information

 

Our Common Stock trades on the OTCQB Market under the symbol UNIR.

 

On January 27, 2020, the Company announced a one-for-five reverse stock split on its common stock that became effective on February 24, 2020. Share and per share amounts have been adjusted to give effect to the reverse stock split. Adjusted for the reverse stock split, basic and diluted loss per share were $0.58 for the year ended December 29, 2019 and $0.50 for the year ended December 30, 2018. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split.

 

As of March 2, 2020 there were 729 stockholders of record of our Common Stock.

 

 We believe that there are presently approximately seven market makers for our Common Stock. When stock is traded in the public market, characteristics of depth, liquidity and orderliness of the market may depend upon the existence of market makers as well as the presence of willing buyers and sellers. We do not know if these or other market makers will continue to make a market in our Common Stock. Further, the trading volume in our Common Stock has historically been both sporadic and light.

 

Currently, the payment by the Company of dividends on its Common Stock rests within the sole discretion of its Board of Directors. The payment of dividends will depend upon our earnings, our capital requirements and our financial condition, as well as other relevant factors. The Company has not been required to or declared any cash dividends since its inception, and has no present intention of paying any cash dividends on its Common Stock in the foreseeable future.

 

Transfer Agent

 

The Transfer Agent for the Common Stock of the Company is Continental Stock Transfer and Trust Company, 17 Battery Place, New York, NY 10004.

 

Recent Sales of Unregistered Securities

 

None. 

 

There were no repurchases by the Company of its securities during the fourth quarter of fiscal 2019.

 

 11 

 

ITEM 6.SELECTED FINANCIAL DATA

 

Not applicable.

 

ITEM 7.MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

 

Business Description

 

We are a leading provider of manufactured vinyl coated fabrics. Our best known brand, Naugahyde, is the product of many improvements on rubber-coated fabrics developed a century ago in Naugatuck, Connecticut. We design, manufacture and market a wide selection of vinyl coated fabric products under a portfolio of recognized brand names. We believe that our business has continued to be a leading supplier in its marketplace because of our ability to provide specialized materials with performance characteristics customized to the end-user specifications, complemented by technical and customer support for the use of our products in manufacturing.

 

Our vinyl coated fabric products have undergone considerable evolution and today are distinguished by superior performance in a wide variety of applications as alternatives to leather, cloth and other synthetic fabric coverings. Our standard product lines consist of more than 600 SKUs with combinations of colors, textures, patterns and other properties. Our products are differentiated by unique protective top finishes and transfer print capabilities. Additional process capabilities include embossing grains and patterns, and rotogravure printing, which imparts five color character prints and non-registered prints, lamination and panel cutting.

 

Our vinyl coated fabric products have various high performance characteristics and capabilities. They are durable, stain resistant, easily processed, more cost-effective and better performing than traditional leather or fabric coverings. Our products are frequently used in applications that require rigorous performance characteristics such as automotive and non-automotive transportation, certain indoor/outdoor furniture, commercial and hospitality seating, healthcare facilities and athletic equipment. We manufacture materials in a wide range of colors and textures. They can be hand or machine sewn, laminated to an underlying structure, thermoformed to cover various substrates or made into a variety of shapes for diverse end-uses. We are a long-established supplier to the global automotive industry and manufacture products for interior soft trim components from floor to headliner, which are produced to meet specific component production requirements such as cut and sew, vacuum forming/covering, compression molding, and high frequency welding. Some products are supplied with micro perforations, which are necessary on most compression molding processes. Materials can also be combined with polyurethane or polypropylene foam laminated with either flame or hot melt adhesive for seating, fascia and door applications.

 

 12 

 

Products are developed and marketed based upon the performance characteristics required by end-users. For example, for recreational products used outdoors, such as boats, personal watercraft, golf carts and snowmobiles, a product designed primarily for water-based durability and weatherability is used. We also manufacture a line of products called BeautyGard®, with water-based topcoats that contain agents to protect against bacterial and fungal micro-organisms and can withstand repeated cleaning, a necessity in the restaurant and health care industries. These topcoats are environmentally friendlier than solvent-based topcoats. The line is widely used in hospitals and other healthcare facilities. Flame and smoke retardant vinyl coated fabrics are used for a variety of commercial and institutional furniture applications, including hospitals, restaurants and residential care centers and seats for school buses, trains and aircraft.

 

We currently conduct our operations in manufacturing facilities that are located in Stoughton, Wisconsin and Earby, England.

 

Overview

 

On November 10, 2014, the Company acquired through its subsidiary UEP Holdings LLC (“UEPH”) all of the ownership interests in Uniroyal Engineered Products, LLC (“Uniroyal”), and acquired directly all of the ordinary common stock of Uniroyal Global (Europe) Limited (“UGEL”, formerly known as Engineered Products Acquisition Limited (“EPAL”)), the holding company for Uniroyal Global Limited (formerly known as Wardle Storeys (Earby) Limited (“Wardle Storeys”)).

 

On January 27, 2020, the Company announced a one-for-five reverse stock split on its common stock that became effective on February 24, 2020. Share and per share amounts have been adjusted to give effect to the reverse stock split. Adjusted for the reverse stock split, basic and diluted loss per share were $0.58 for the year ended December 29, 2019 and $0.50 for the year ended December 30, 2018. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split.

 

The Company and its subsidiaries use a 52/53-week fiscal year ending on the Sunday nearest to December 31. The years ended December 29, 2019 and December 30, 2018 were both 52-week years. The Company’s U.K. subsidiaries use the calendar year end of December 31. The activity of the U.K. subsidiaries that occurs on the days that do not coincide with the Company’s year-end is not material since there generally is no production or sales during that period.

 

Our Earby, England operation’s functional currency is the British Pound Sterling (“Pound Sterling”) and has sales and purchases transactions that are denominated in currencies other than the Pound Sterling, principally the Euro. Approximately 29% of the Company’s global revenues and 33% of its global raw material purchases are derived from these Euro transactions.

 

The average year-to-date exchange rate for the Pound Sterling to the U.S. Dollar was approximately 4.5% lower and the average exchange rate for the Euro to the Pound Sterling was approximately 0.8% lower in 2019 compared to 2018. These exchange rate changes had the effect of decreasing net sales by approximately $2.4 million for the year ended December 29, 2019. The overall currency effect on the Company’s net loss allocable to common shareholders was a positive amount of approximately $20,000 for the year ended December 29, 2019.

 

The U.K. exit from the European Union on January 31, 2020, commonly referred to as Brexit, has caused, and may continue to cause, uncertainty in the global markets. Political and regulatory responses to the withdrawal are still developing, and we are in the process of assessing the impact that the withdrawal may have on our business as more information becomes available. Any impact from Brexit on our business and operations over the long term will depend, in part, on the outcome of tariff, tax treaties, trade, regulatory, and other negotiations the U.K. conducts.

 

Subsequent to year-end 2019, the World Health Organization declared the novel coronavirus (COVID-19) outbreak a public health emergency.  There have been mandates from international, federal, state and local authorities requiring forced closures of various schools, businesses and other facilities and organizations. These forced closures could negatively impact our business.  While the closures and limitations on movement, domestically and internationally, are expected to be temporary, the duration of the supply chain disruption, and related financial impact, cannot be estimated at this time. Should the closures continue for an extended period of time or should the effects of the coronavirus continue to spread, the impact could have a material adverse effect on our financial position, results of operations and cash flows.

 

 13 

 

Year Ended December 29, 2019 Compared to the Year Ended December 30, 2018

 

The following table sets forth, for the year ended December 29, 2019 (“year ended 2019”) and December 30, 2018 (“year ended 2018”), certain operational data including their respective percentage of net sales:

 

   Year Ended
   December 29, 2019  December 30, 2018  Change  %
Change
                   
Net Sales  $91,136,244   100.0%  $99,560,721   100.0%  $(8,424,477)  -8.5%
Cost of Goods Sold   76,174,406   83.6%   82,622,952   83.0%   (6,448,546)  -7.8%
Gross Profit   14,961,838   16.4%   16,937,769   17.0%   (1,975,931)  -11.7%
Operating Expenses:                        
Selling   4,300,730   4.7%   4,697,627   4.7%   (396,897)  -8.4%
General and administrative   6,047,734   6.6%   6,928,779   7.0%   (881,045)  -12.7%
Research and development   1,634,385   1.8%   1,653,234   1.7%   (18,849)  -1.1%
Other operating expenses   343,003   0.4%   510,230   0.5%   (167,227)  -32.8%
Total Operating Expenses   12,325,852   13.5%   13,789,870   13.9%   (1,464,018)  -10.6%
Operating Income   2,635,986   2.9%   3,147,899   3.2%   (511,913)  -16.3%
Interest expense   (2,036,248)  -2.2%   (1,886,886)  -1.9%   (149,362)  7.9%
Other income (expense)   258,486   0.3%   (206,608)  -0.2%   465,094   <-100%
Income before Tax Provision   858,224   0.9%   1,054,405   1.1%   (196,181)  -18.6%
Tax benefit   (103,199)  -0.1%   (192,392)  -0.2%   89,193   -46.4%
Net Income   961,423   1.1%   1,246,797   1.3%   (285,374)  -22.9%
Preferred stock dividend   (3,126,496)  -3.4%   (3,105,983)  -3.1%   (20,513)  0.7%
Net Loss Allocable to
Common Shareholders
  $(2,165,073)  -2.4%  $(1,859,186)  -1.9%  $(305,887)  16.5%

 

Revenue

 

Total sales for the year ended 2019 decreased $8,424,477 or 8.5% to $91,136,244 from $99,560,721 for the year ended 2018. Excluding the negative currency effect of the exchange rates, total sales would have decreased by approximately $5,985,000 or 6.0%. U.S. automotive sales for the year ended 2019 decreased 10.7% compared to the year ended 2018 primarily due to a slowing of new automotive programs beginning in the third quarter of 2019. European automotive sales declined by 5.9% compared to the prior year, excluding the currency adjustment. Sales for the industrial sector decreased 4.9% (4.1% before currency effect) primarily due to a decline in the U.S. contract market.

 

Gross Profit

 

Total gross profit for the year ended 2019 decreased $1,975,931 or 11.7% to $14,961,838 from $16,937,769 for the year ended 2018. The gross profit percentage was 16.4% of sales for the year ended 2019 compared to 17.0% for the year ended 2018. Although raw material pricing during 2019 has been relatively flat and in some cases slightly down from the beginning of the year, raw material prices were generally higher for the year ended 2019 compared to 2018. This had a negative impact on the gross profit amount and percentage in 2019. Also having a negative impact were the effects of product mix. To offset raw material price increases, the Company increased sales prices during the first three months of 2019 in several of its markets. The decrease in gross profit included a negative net currency effect of $378,000. Excluding this effect, gross profit would have declined by 9.4%.

 

Operating Expenses

 

Selling expenses for the year ended 2019 decreased $396,897 or 8.4% to $4,300,730 from $4,697,627 for the year ended 2018. The Company pays commissions only on certain U.K. automotive programs. In conjunction with the decline in total automotive sales in the U.K. for the year ended 2019, there was a decrease in commissionable sales. The decrease in selling expense for the year ended 2019 was principally attributable to the lower commissions related to these sales. Also contributing to the decrease was the favorable currency effect of $110,000. This decrease was partially offset by increases in employment related costs.

 

 14 

 

General and administrative expenses for the year ended 2019 decreased $881,045 or 12.7% to $6,047,734 from $6,928,779 for the year ended 2018. This decrease was primarily attributable to a decrease in employment costs for the year ended 2019 compared to the year ended 2018. Also contributing to the decrease was the favorable currency effect of $166,000. Included in general and administrative expenses for the year ended 2019 were $211,775 of one-time expenses associated with the fourth quarter 2018 decision to de-commission the U.K. calender equipment.

 

Research and development expenses for the year ended 2019 decreased $18,849 or 1.1% to $1,634,385 from $1,653,234 for the year ended 2018. The decrease was principally attributable to the favorable currency effect of $41,000 which offset the increase in development costs for new trials.

 

Other operating expenses were $343,003 for the year ended 2019 and $510,230 for the year ended 2018. These amounts reflect costs to restructure the operations and management team at the Company’s U. K. facility in order to increase operating efficiencies and decrease costs. The expense for 2019 was for settlement agreements with certain members of the U.K. facility’s management team which terminated their continuing service. The expense for 2018 was an impairment charge for assets used in the calender operations at the U.K. facility. During the fourth quarter of 2018, the Company decided that it would de-commission the equipment and no longer offer the calendered product after determining that these operations could not be economically modernized.

 

Operating Income

 

Operating income for the year ended 2019 decreased $511,913 or 16.3% to $2,635,986 from $3,147,899 for the year ended 2018. The operating income percentage was 2.9% of sales for the year ended 2019 compared to 3.2% for the year ended 2018. Operating income decreased from the decrease in gross profit which was partially offset by the decrease in operating expenses.

 

Interest Expense

 

Interest expense for the year ended 2019 increased $149,362 or 7.9% to $2,036,248 from $1,886,886 for the year ended 2018. The increase was primarily due to new equipment purchases and higher interest rates on LIBOR and prime during the year ended 2019 partially offset by debt repayments compared to the year ended 2018.

 

Other Income (Expense)

 

Other income for the year ended 2019 was $258,486 compared to other expense of $206,608 for the year ended 2018. Included in other income (expense) are the currency gains and losses recognized on foreign currency transactions and the change in the fair value of financial assets and liabilities that are denominated in Euros as these currencies fluctuated during the year. Also included in other income (expense) are gains and losses from the change in fair values on the Company’s foreign currency exchange contracts.

 

Tax Benefit

 

For the year ended 2019, the tax benefit was $103,199 compared to $192,392 for the year ended 2018. The tax benefit for 2019 and 2018 were principally attributable to the results of the U.K. operations partially offset by a tax provision for the U.S. operations.

 

Based on management’s review at December 29, 2019 and December 30, 2018, it was determined that a valuation allowance for the Company’s deferred tax assets was not required since it was more likely than not that the deferred tax assets would be realized.

 

Preferred Stock Dividend

 

The terms of the acquisitions in November 2014 resulted in the issuance of preferred ownership units/stock of UEPH and Uniroyal Global (Europe) Limited (formerly EPAL) to the sellers. These preferred units carried quarterly dividend requirements on a total value of $55,000,000 at rates ranging from 5% to 7%. The dividend rate on the Series B UEP Holdings preferred units which started at 5.5% increases by 0.5% on the anniversary of the issuance up to a maximum of 8.0%.

 

 15 

 

Liquidity and Sources of Capital

 

Cash, as it is needed, is provided by using the Company’s lines of credit. These lines provide for a total borrowing commitment in excess of $43,000,000 subject to the underlying borrowing base specified in the agreements.  Of the total outstanding borrowings of $20,530,773 at December 29, 2019, $16.2 million of the lines bears interest at LIBOR or the Eurodollar rate plus a range of 1.95% to 2.45%, depending on the underlying borrowing base, or, at our option, at the bank's prime or base lending rate and $4.3 million bears interest at the bank’s prime or base lending rate which was 5.25% at December 29, 2019. At December 29, 2019, the lines provided an additional availability of approximately $1.6 million.  We plan to use the availability under the lines of credit at year-end 2019 and cash provided by operating activities to finance our cash needs for fiscal 2020. The balances due under the lines of credit are recorded as current liabilities on the consolidated balance sheets.

 

Given our capital resources in the U.S. and the potential for increased investment and acquisitions in foreign jurisdictions, we did not have a history of repatriating a significant portion of our foreign cash. Accordingly, we had not recognized a deferred tax liability for these unremitted earnings. However, the Tax Cuts and Jobs Act of 2017 imposed a one-time transition tax on deemed repatriation of deferred foreign income, which the Company recorded in tax expense in 2017. In the event that we decide to repatriate these foreign amounts to fund U.S. operations, the Company will not be required to pay any additional U.S. tax related to these amounts.

 

The ratio of current assets to current liabilities, including the amount due under our lines of credit, was 0.89 at December 29, 2019 and 0.97 at December 30, 2018.

 

Cash balances decreased $533,361, before the effects of currency translation of $18,108, to $513,588 at December 29, 2019 from $1,028,841 at December 30, 2018.  Of the above noted amounts, $498,007 and $923,071 were held outside the U.S. by our foreign subsidiaries as of December 29, 2019 and December 30, 2018, respectively.

 

Cash provided by operations was $4,659,527 for the year ended 2019 as compared to $5,224,659 for the year ended 2018. For 2019, cash provided by operations was primarily due to adjustments for non-cash items of $2,444,326, changes in working capital of $1,355,358, net income of $961,423, and changes in other assets and liabilities of $(101,580). For 2018, cash provided by operations was primarily due to adjustments for non-cash items of $3,109,868, which includes the impairment loss, net income of $1,246,797 and changes in working capital of $1,088,600, offset by changes in other assets and liabilities of ($220,606).

 

Cash used in investing activities was $1,894,296 for the year ended 2019 as compared to $3,856,835 for the year ended 2018. During 2019 and 2018, cash used in investing activities was principally for purchases of machinery and equipment at our manufacturing locations and payments made for company-owned key man life insurance premiums. For the year ended 2019, the payments made for the life insurance premiums were net of proceeds from policy loans of $249,051.

 

For the year ended 2019, cash used in financing activities was $3,298,592 as compared to $1,543,937 for the year ended 2018. Impacting cash flows from financing activities for the year ended 2019 and 2018 were net advances on lines of credit of $891,022 and $544,872, respectively. The increases in advances on the lines of credit were used to fund working capital. Also included in cash flows from financing activities were preferred dividend payments of $3,114,592 and $3,089,294 during the years ended 2019 and 2018, respectively. During the years ended 2019 and 2018, additions to related party obligations were $1,350,000 and $272,000, respectively, while payments on related party obligations were $782,384 and $229,411, respectively. During the year ended 2019, we drew $604,935 on equipment financing commitments from our bank to finance asset purchases. During the year ended 2018, we drew $1,497,696 on equipment financing commitments from our bank to finance asset purchases and $925,657 to reduce our borrowings on our lines of credit for a total of $2,423,353 in proceeds from issuance of long-term debt.

 

Our credit agreements contain customary affirmative and negative covenants. We were in compliance with our debt covenants as of December 29, 2019 and through the date of filing of this report.

 

We currently have several on-going capital projects that are important to our long-term strategic goals. Machinery and equipment will also be added as needed to increase capacity or enhance operating efficiencies in our manufacturing plants. We will use a combination of financing arrangements to provide the necessary capital. We believe that our existing resources, including cash on hand and our credit facilities, together with cash generated from operations and additional bank borrowings, will be sufficient to fund our cash flow requirements through at least the next twelve months. However, there can be no assurance that additional financing will be available on favorable terms, if at all.

 

We have no material off balance sheet arrangements.

 

 16 

 

Critical Accounting Policies, Judgments and Estimates

 

The U.S. Securities and Exchange Commission ("SEC") requires companies to provide additional disclosure and commentary on their most critical accounting policies. The SEC has defined the most critical accounting policies as the ones that are most important to the portrayal of a company's financial condition and operating results, and requires management to make its most significant estimates and judgments in the preparation of its consolidated financial statements. On an on-going basis, we evaluate our estimates and assumptions based upon historical experience and various other factors and circumstances. Management believes that our estimates and assumptions are reasonable under the circumstances; however, actual results may vary from these estimates and assumptions under different future circumstances. Our critical accounting policies are described below.

 

Revenue Recognition

 

Revenue is recognized when obligations under the terms of a contract with a customer are satisfied, which includes the control of products transferring to the customer. For Uniroyal, this generally occurs when products are shipped and, for UGL, this generally occurs when the customer accepts delivery either at the Company’s U.K. facility or at a mutually agreed upon location. Revenue is measured as the amount of consideration the Company expects to receive in exchange for products transferred to the customer. Based on historical results and analysis, we estimate and calculate provisions for customer rebates and sales returns and allowances and record these estimated amounts as an offset to revenue in the same period the related revenue is recognized.

 

Accounts Receivable

 

On an ongoing basis, we evaluate our accounts receivable based on individual customer circumstances, historical write-offs and collections, and current industry and customer credit conditions, and adjust the allowance for doubtful accounts accordingly. Our policy regarding write-offs and collection efforts varies based on individual customer circumstances. Past due accounts receivable are determined based on individual customer credit terms.

 

Inventories

 

We value inventory at the lower of cost using the first-in, first-out (FIFO) method, or market. We assess the recoverability of inventory and record a provision for obsolescence based upon specifically identified, discontinued or obsolete items, or a percentage of quantities on hand compared with historical and forecasted usage and sales levels. These assessments, which require management’s judgments and estimates, reduce inventories to their estimated net realizable value.

 

Finite-Lived Long-Lived Assets

 

Finite-lived long-lived assets consist of property, equipment and other intangible assets, which excludes goodwill and trademarks since they are considered to have indefinite useful lives. Property, equipment and other intangible assets are amortized using the straight-line method over their estimated useful life. These finite-lived long-lived assets are reviewed for impairment at least annually or whenever events or changes in business circumstances indicate that the carrying amount of an asset may not be fully recoverable. An impairment loss would be recognized when the estimated future cash flows from the use of the asset are less than the carrying amount of that asset.

 

Goodwill and Intangible Indefinite-Lived Assets

 

Goodwill and trademarks are indefinite-lived assets and are not amortized unless, for trademarks, we determine that their useful lives are no longer indefinite. These indefinite-lived assets are reviewed for impairment at least annually or whenever events or changes in business circumstances indicate that the carrying amount of an asset may not be fully recoverable. An impairment loss would be recognized when the estimated future cash flows from the use of the asset are less than the carrying amount of that asset.

 

Income Tax

 

The Company files income tax returns in the United States as a C-Corporation, and in several state jurisdictions and in the United Kingdom. The Company’s subsidiary, Uniroyal, is a limited liability company (LLC) for federal and state income tax purposes and as such, its income, losses, and credits pass through to its members. The Company made the acquisition of Uniroyal through UEPH, a limited liability company, which issued preferred ownership interests to the sellers that provide for quarterly dividends. Uniroyal’s taxable income is allocated entirely to UEPH as its sole member and since it is a pass-through entity, this income less the dividends paid to the sellers of Uniroyal is reported on the Company’s tax return. The taxable income applicable to the dividends for the preferred ownership interests is reported to the sellers who report it on their respective individual tax returns.

 

 17 

 

We follow ASC 740 Income Taxes for recording the provision for income taxes. Deferred tax assets and liabilities are computed based upon the difference between the financial statement and income tax basis of assets and liabilities (temporary differences) using the enacted marginal tax rate applicable when the related asset or liability is expected to be realized or settled. Deferred income tax expenses or benefits are based on the changes in the asset or liability each period. We have federal and state net operating loss carryforwards of approximately $11.7 million and $13.8 million, respectively, as of December 29, 2019, which expire in years beginning 2021 through 2034. We have foreign net operating loss carryforwards of approximately $2.2 million as of December 29, 2019, which have no expiration date. As a result of the federal and state loss carryforwards, we have deferred tax assets of $3,435,368 net of a valuation allowance of $740,818 as of December 29, 2019.

 

We reduce our deferred tax assets by a valuation allowance if it is more likely than not that some portion or all of a deferred tax asset will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which temporary differences are deductible. In making our valuation allowance determinations, we consider all available positive and negative evidence affecting specific deferred tax assets, including our past and anticipated future performance, the reversal of deferred tax liabilities, the length of carryback and carryforward periods, and the implementation of tax planning strategies. Management has determined that there is uncertainty as to the realization of the state net operating loss carryforward and has established a valuation allowance against the state net operating loss carryforward.

 

Foreign Currency Translation

 

The financial position and results of operations of our foreign subsidiaries are measured using the local currency as the functional currency. Assets and liabilities of operations denominated in foreign currencies are translated into U.S. dollars at exchange rates in effect at the balance sheet date, while the capital accounts are translated at the historical rate for the date they were recognized. Revenues and expenses are translated at the weighted average exchange rates during the year. The resulting translation gains and losses on assets and liabilities are recorded in accumulated other comprehensive loss, and are excluded from net income until realized through a sale or liquidation of the investment. Transaction gains and losses generated from the remeasurement of assets and liabilities denominated in currencies other than the functional currency of our foreign operations are included in other income (expense) in the accompanying consolidated statements of operations.

 

Fair Value of Financial Instruments

 

Our short-term financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable and lines of credit. We adjust the carrying value of financial instruments denominated in other currencies such as cash, accounts receivable, accounts payable and lines of credit using the appropriate exchange rates at the balance sheet date. We believe that the carrying values of these short-term financial instruments approximate their estimated fair values.

 

The fair value of our long-term debt is estimated based on current rates for similar instruments with the same remaining maturities. In determining the current interest rates for similar instruments, we take into account its risk of nonperformance. We believe that the carrying value of our long-term debt approximates its estimated fair value.

 

Postretirement and Postemployment Benefit Liabilities

 

We provide certain health care and life insurance benefits for substantially all employees (active or retired) who were employed prior to February 20, 1987. In calculating our plan obligations and related expense, we make various assumptions and estimates. These assumptions include discount rates, mortality rates, retirement rates, termination rates and other factors. While we believe that the assumptions used are appropriate, differences in actual experience or changes in assumptions may affect our obligations and future expense.

 

Recent Accounting Standards

 

See Note 1 to the consolidated financial statements for a discussion on accounting standards that the Company adopted during 2019 and on those recently issued but not yet required to be adopted.

 

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISKS

 

Not applicable

 

 18 

 

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Board of Directors and Stockholders of

Uniroyal Global Engineered Products, Inc. and subsidiaries

Sarasota, Florida

 

 

Opinion on the Consolidated Financial Statements

 

We have audited the accompanying consolidated balance sheets of Uniroyal Global Engineered Products, Inc. and subsidiaries (the "Company") as of December 29, 2019 and December 30, 2018, and the related consolidated statements of operations, comprehensive loss, changes in stockholders' equity and cash flows for the years then ended, and the related notes (collectively referred to as the consolidated financial statements). In our opinion, the consolidated financial statements present fairly, in all material respects, the financial position of the Company as of December 29, 2019 and December 30, 2018, and the results of their operations and cash flows for the years then ended in conformity with accounting principles generally accepted in the United States of America.

 

Adoption of New Accounting Standard

 

As discussed in Notes 1 and 16 to the consolidated financial statements, the Company changed its method of accounting for leases in fiscal year 2019 due to the adoption of ASU No. 2016-02, Leases (Topic 842), and the related amendments.

 

Basis for Opinion

 

These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's consolidated financial statements based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) ("PCAOB") and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement, whether due to error or fraud. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. As part of our audits we are required to obtain an understanding of internal control over financial reporting but not for the purpose of expressing an opinion on the effectiveness of the Company's internal control over financial reporting. Accordingly, we express no such opinion.

 

Our audits included performing procedures to assess the risks of material misstatement of the consolidated financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the consolidated financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the consolidated financial statements. We believe that our audits provide a reasonable basis for our opinion.

 

 

/s/ Frazier & Deeter, LLC

Tampa, Florida

March 20, 2020

 

We have served as the Company's auditor since 2010.

 

 19 

 

Uniroyal Global Engineered Products, Inc.

Consolidated Balance Sheets

 

ASSETS  December 29, 2019  December 30, 2018
CURRENT ASSETS      
Cash and cash equivalents  $513,588   $1,028,841 
Accounts receivable, net   11,662,325    12,422,330 
Inventories, net   19,116,542    19,460,260 
Other current assets   930,015    965,520 
Related party receivable   -    20,118 
Total Current Assets   32,222,470    33,897,069 
           
PROPERTY AND EQUIPMENT, NET   19,103,319    18,878,949 

Operating lease right-of-use assets

   6,607,963    - 
           
OTHER ASSETS          
Intangible assets   3,263,781    3,217,997 
Goodwill   1,079,175    1,079,175 
Other long-term assets   3,489,313    3,693,367 
Total Other Assets   7,832,269    7,990,539 
TOTAL ASSETS  $65,766,021   $60,766,557 
           
LIABILITIES AND STOCKHOLDERS' EQUITY          
CURRENT LIABILITIES          
Checks issued in excess of bank balance  $332,141   $855,210 
Lines of credit   20,530,773    19,325,116 
Current maturities of long-term debt   1,497,160    1,369,967 
Current maturities of finance lease liabilities   106,253    388,862 
Accounts payable   9,232,119    9,335,235 
Accrued expenses and other liabilities   3,890,367    3,326,291 
Related party obligation   608,517    84,154 
Current portion of postretirement benefit liability - health and life   155,803    139,095 
Total Current Liabilities   36,353,133    34,823,930 
           
LONG-TERM LIABILITIES          
Long-term debt, less current portion   3,378,458    3,967,754 
Finance lease liabilities, less current portion   6,397    109,446 
Operating lease liabilities   6,106,568    - 
Related party lease financing obligation   2,646,970    2,613,717 
Long-term debt to related parties   3,190,655    2,990,655 
Postretirement benefit liability - health and life, less current portion   2,592,023    2,101,892 
Other long-term liabilities   715,308    653,653 
Total Long-Term Liabilities   18,636,379    12,437,117 
Total Liabilities   54,989,512    47,261,047 
           
STOCKHOLDERS' EQUITY          

Preferred units, Series A UEP Holdings, LLC, 200,000 units issued

and outstanding ($100 issue price)

   617,571    617,571 

Preferred units, Series B UEP Holdings, LLC, 150,000 units issued

and outstanding ($100 issue price)

   463,179    463,179 

Preferred stock, Uniroyal Global (Europe) Limited, 50 shares

issued and outstanding ($1.51 stated value)

   75    75 

Common stock, 95,000,000 shares authorized ($.001 par value)

3,736,006 and 3,738,006 shares issued and outstanding as of

December 29, 2019 and December 30, 2018, respectively (1)

   18,680    18,690 
Additional paid-in capital (1)   35,275,646    35,244,770 
Accumulated deficit   (24,301,203)   (22,136,130)
Accumulated other comprehensive loss   (1,297,439)   (702,645)
Total Stockholders' Equity   10,776,509    13,505,510 
           
TOTAL LIABILITIES AND STOCKHOLDERS' EQUITY  $65,766,021   $60,766,557 

 

(1)The number of issued and outstanding shares of common stock as of December 29, 2019 and December 30, 2018 have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split. See Note 1 for additional information.

 

See accompanying notes to the consolidated financial statements.

 

 20 

 

Uniroyal Global Engineered Products, Inc.

Consolidated Statements of Operations

 

   Years Ended
   December 29, 2019  December 30, 2018
       
NET SALES  $91,136,244   $99,560,721 
           
COST OF GOODS SOLD   76,174,406    82,622,952 
           
Gross Profit   14,961,838    16,937,769 
           
OPERATING EXPENSES:          
Selling   4,300,730    4,697,627 
General and administrative   6,047,734    6,928,779 
Research and development   1,634,385    1,653,234 
Other operating expenses   343,003    510,230 
OPERATING EXPENSES   12,325,852    13,789,870 
           
Operating Income   2,635,986    3,147,899 
           
OTHER EXPENSE:          
Interest and other debt related expense   (2,036,248)   (1,886,886)
Other income (expense)   258,486    (206,608)
Net Other Expense   (1,777,762)   (2,093,494)
           
INCOME BEFORE TAX PROVISION   858,224    1,054,405 
           
TAX BENEFIT   (103,199)   (192,392)
           
NET INCOME   961,423    1,246,797 
           
Preferred stock dividend   (3,126,496)   (3,105,983)
           
NET LOSS ALLOCABLE TO COMMON
 SHAREHOLDERS
  $(2,165,073)  $(1,859,186)
           
LOSS PER COMMON SHARE (1):          
Basic  $(0.58)  $(0.50)
Diluted  $(0.58)  $(0.50)
WEIGHTED AVERAGE SHARES OUTSTANDING (1):          
Basic   3,736,742    3,738,006 
Diluted   3,736,742    3,738,006 

 

(1)Share and per share amounts have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. See Note 1 for additional information.

 

See accompanying notes to the consolidated financial statements.

 

 21 

 

Uniroyal Global Engineered Products, Inc.

Consolidated Statements of Comprehensive Loss

 

   Years Ended
   December 29, 2019  December 30, 2018
       
NET INCOME  $961,423   $1,246,797 
           
OTHER COMPREHENSIVE LOSS:          
Minimum benefit liability adjustment   (830,899)   271,836 
Foreign currency translation adjustment   236,105    (599,329)
OTHER COMPREHENSIVE LOSS   (594,794)   (327,493)
           
COMPREHENSIVE INCOME   366,629    919,304 
           
Preferred stock dividend   (3,126,496   (3,105,983)
           
COMPREHENSIVE LOSS TO COMMON
SHAREHOLDERS
  $(2,759,867)  $(2,186,679)

 

See accompanying notes to the consolidated financial statements.

 

 22 

 

Uniroyal Global Engineered Products, Inc.

Consolidated Statements of Changes in Stockholders' Equity

For the Years Ended December 29, 2019 and December 30, 2018

 

   UEPH Series A  UEPH Series B  UGEL Preferred  Common Stock  Additional
Paid In
  Accumulated  Accumulated
Other
Comprehensive
  Total Stockholders'
   Units  Amount  Units  Amount  Shares  Amount  Shares (1)  Amount (1)  Capital (1)  Deficit  Loss  Equity
                                     
Balance December 31, 2017   200,000   $617,571    150,000   $463,179    50   $75    3,738,006   $18,690   $34,944,972   $(20,276,944)  $(375,152)  $15,392,391 
Net income   -    -    -    -    -    -    -    -    -    1,246,797    -    1,246,797 
Other comprehensive loss   -    -    -    -    -    -    -    -    -    -    (327,493)   (327,493)
Stock-based compensation
 expense
   -    -    -    -    -    -    -    -    299,798    -    -    299,798 
Preferred stock dividend   -    -    -    -    -    -    -    -    -    (3,105,983)   -    (3,105,983)
Balance December 30, 2018   200,000    617,571    150,000    463,179    50    75    3,738,006    18,690    35,244,770    (22,136,130)   (702,645)   13,505,510 
Net income   -    -    -    -    -    -    -    -    -    961,423    -    961,423 
Other comprehensive loss   -    -    -    -    -    -    -    -    -    -    (594,794)   (594,794)
Stock-based compensation
 expense
   -    -    -    -    -    -    -    -    44,166    -    -    44,166 
Treasury shares purchased at
 cost and retired
   -    -    -    -    -    -    (2,000)   (10)   (13,290)   -    -    (13,300)
Preferred stock dividend   -    -    -    -    -    -    -    -    -    (3,126,496)   -    (3,126,496)
Balance December 29, 2019   200,000   $617,571    150,000   $463,179    50   $75    3,736,006   $18,680   $35,275,646   $(24,301,203)  $(1,297,439)  $10,776,509 

 

(1)The number of shares of common stock have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split. See Note 1 for additional information.

 

See accompanying notes to the consolidated financial statements.

 

 23 

 

Uniroyal Global Engineered Products, Inc.

Consolidated Statements of Cash Flows

   Years Ended
CASH FLOWS FROM OPERATING ACTIVITIES  December 29, 2019  December 30, 2018
       
Net income  $961,423   $1,246,797 
Adjustments to reconcile net income to net cash flows from operating activities:          
Depreciation   2,354,650    2,168,101 
Stock-based compensation expense   44,166    299,798 
Deferred tax expense   252,690    165,240 
Impairment loss on equipment   -    510,230 
Amortization of intangible assets   16,667    27,504 
Loss on disposal of property and equipment   74,681    58,319 
Noncash postemployment health and life benefit   (294,468)   (119,324)
Noncash lease expense   (4,060)   - 
Changes in assets and liabilities:          
Accounts receivable   990,417    2,253,452 
Inventories   588,802    (218,434)
Other current assets   58,309    (164,357)
Related party receivable   20,118    16,998 
Other long-term assets   141,166    128,505 
Accounts payable   (300,897)   (636,595)
Accrued expenses and other liabilities   (1,391)   (162,464)
Postretirement benefit liability - health and life   (29,592)   (58,216)
Other long-term liabilities   (213,154)   (290,895)
Cash provided by operating activities   4,659,527    5,224,659 
           
CASH FLOWS FROM INVESTING ACTIVITIES          
Capital expenditures   (1,966,200)   (3,725,660)
Payments on life insurance policies, net of proceeds from policy loans   71,904    (131,175)
Cash used in investing activities   (1,894,296)   (3,856,835)
           
CASH FLOWS FROM FINANCING ACTIVITIES          
Net change in checks issued in excess of bank balance   (523,069)   168,570 
Net advances on lines of credit   891,022    544,872 
Payments on long-term debt   (1,319,867)   (1,230,206)
Proceeds from issuance of long-term debt   604,935    2,423,353 
Payments on finance lease liabilities   (391,337)   (403,821)
Proceeds from related party obligations   1,350,000    272,000 
Payments on related party obligations   (782,384)   (229,411)
Payment of preferred stock dividends   (3,114,592)   (3,089,294)
Purchase and retirement of treasury stock   (13,300)   - 
Cash used in financing activities   (3,298,592)   (1,543,937)
Net change in cash and cash equivalents   (533,361)   (176,113)
Cash and cash equivalents - beginning of period   1,028,841    1,267,319 
Effects of currency translation on cash and cash equivalents   18,108    (62,365)
           
CASH AND CASH EQUIVALENTS - END OF PERIOD  $513,588   $1,028,841 

 

See Note 2 for noncash transactions and supplemental disclosure of cash flow information.

 

See accompanying notes to the consolidated financial statements.

 

 24 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 1 - Summary of Significant Accounting Policies

 

Description of the Business

 

Uniroyal Global Engineered Products, Inc. (the “Company”) is primarily engaged in the development, manufacturing and distribution of vinyl coated fabrics primarily for use in transportation, residential, hospitality, health care, office furniture and automotive applications. The Company’s customers are located primarily throughout North America and Europe.

 

On April 29, 2015, the Board of Directors adopted an amendment to the Articles of Incorporation to change the Company’s name from Invisa, Inc. to Uniroyal Global Engineered Products, Inc. On June 25, 2015, the stockholders approved the amendment. The amended and restated Articles of Incorporation were filed with the Nevada Secretary of State and became effective on July 15, 2015.

 

On November 10, 2014, the Company acquired all of the ownership interests in Uniroyal Engineered Products, LLC (“Uniroyal”), a U.S. manufacturer of textured coatings, and all of the ordinary common stock of Engineered Products Acquisition Limited (“EPAL”), the holding company for Wardle Storeys (Earby) Limited (“Wardle Storeys”), a European manufacturer of textured coatings and polymer films.

 

The Company made the acquisition of Uniroyal through its newly formed subsidiary, UEP Holdings, LLC (“UEPH”). The aggregate purchase consideration paid for 100% of the outstanding equity of Uniroyal was preferred ownership interests issued by UEPH having a liquidation preference of $35 million. See Note 13 for a description of the preferred units issued.

 

In a separate transaction, the Company purchased EPAL for 100 shares of the Company’s Common Stock and the Company’s guaranty of outstanding EPAL preferred stock retained by the seller, having a liquidation preference of £12,518,240 (approximately $20 million at closing). These preferred shares were entitled to a fixed cumulative preferential dividend of £625,912 per annum payable quarterly (approximately $1,000,000 at the date of the transaction). On November 24, 2015, the liquidation preference was changed from £12,518,240 to €17,699,314 (approximately $18,851,539) and the payment of the quarterly dividend from £156,478 to €221,241 (approximately $235,644). These conversions were based on the exchange rates on November 24, 2015.

 

As a result of beneficial ownership between the principal owner of the Company and the seller of Uniroyal and EPAL, the seller controls in excess of 80% of the Company’s voting rights in all matters to come before the Company’s shareholders. As a result of this common ownership, the November 10, 2014 transaction was treated as a combination between entities under common control and was accounted for in a manner similar to the pooling-of-interest method. The recognized assets and liabilities were transferred at their carrying amounts at the date of the transaction. Further, the companies were also combined retrospectively for prior year comparative information to the extent permitted.

 

In December 2016, the Company changed the name of EPAL to Uniroyal Global (Europe) Limited (“UGEL”) and the name of Wardle Storeys to Uniroyal Global Limited (“UGL”).

 

The Company and its subsidiaries use a 52/53-week fiscal year ending on the Sunday nearest to December 31. The years ended December 29, 2019 and December 30, 2018 were both 52-week years. The Company’s U.K. subsidiaries use the calendar year end of December 31. The activity of the U.K. subsidiaries that occurs on the days that do not coincide with the Company’s year-end is not material since there generally is no production or sales during that period.

 

Basis of Presentation

 

The consolidated financial statements include the accounts of the Company and its subsidiaries and are prepared in accordance with U.S. Generally Accepted Accounting Principles (GAAP). All intercompany transactions have been eliminated. The Company manages its operations on a consolidated, integrated basis in order to optimize its equipment and facilities and to effectively service its global customer base, and concludes that it operates in a single business segment. 

 

 25 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

On January 27, 2020, the Company announced a one-for-five reverse stock split on its common stock that became effective on February 24, 2020. Share and per share amounts have been adjusted to give effect to the reverse stock split. Adjusted for the reverse stock split, basic and diluted loss per share were $0.58 for the year ended December 29, 2019 and $0.50 for the year ended December 30, 2018. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split.

 

For purposes of comparability, certain reclassifications have been made to amounts previously reported to conform with the current period presentation.

 

Cash and Cash Equivalents

 

The Company defines cash and cash equivalents as highly liquid, short-term investments with a maturity at the date of acquisition of three months or less.

 

The Company maintains cash in bank accounts which, at times, exceeds federally insured limits. The Company has not experienced any losses in such accounts and believes it is not exposed to any significant credit risks.

 

Accounts Receivable

 

Accounts receivable are recorded net of an allowance for doubtful accounts, returns and discounts of $411,376 and $283,560 as of December 29, 2019 and December 30, 2018, respectively. Accounts receivable are recorded when obligations under the terms of a contract with a customer are satisfied, which includes the control of products transferring to the customer. See Note 22 for further discussion.

 

On an ongoing basis, the Company evaluates its accounts receivable based on individual customer circumstances, historical write-offs and collections, and current industry and customer credit conditions, and adjusts its allowance for doubtful accounts accordingly. The Company’s policy regarding write-offs and collection efforts varies based on individual customer circumstances. Past due accounts receivable are determined based on individual customer credit terms.

 

Customer Rebates

 

The Company records customer rebates as a reduction of net sales. Accounts receivable are recorded net of an allowance for customer rebates of $77,337 and $90,288 as of December 29, 2019 and December 30, 2018, respectively.

 

Inventories

 

Inventories are valued at the lower of cost using the first-in, first-out (FIFO) method, or market. The Company and its subsidiaries have policies which are consistently applied to maintain reserves for obsolescence based on specific identification, discontinued or obsolete items, or a percentage of the amount on hand based on inventory aging compared with historical and forecasted usage and sales levels. These inventory recoverability assessments reduce inventories to their estimated net realizable value.

 

Property and Equipment

 

Property and equipment are stated at cost. Major expenditures for property and equipment are capitalized. Maintenance, repairs, and minor refurbishments are expensed as incurred. When assets are disposed of, their costs and related accumulated depreciation are removed from the accounts and resulting gains or losses are included in income.

 

Property and equipment are depreciated using the straight-line method over their estimated useful lives. For income tax reporting purposes, depreciation is calculated using both applicable straight-line methods and accelerated methods or capital allowances based on the various taxing jurisdictions’ approved methods.

 

 26 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Leases

 

The Company determines if an arrangement is a lease at inception. Operating leases are included in operating lease right-of-use assets, accrued expenses and other liabilities, and operating lease liabilities in the accompanying consolidated balance sheet at December 29, 2019. There is no comparable information for operating leases at December 30, 2018 since the Company adopted Accounting Standards Update No. 2016-02, “Leases” on December 31, 2018 and elected to recognize operating lease right-of-use assets and operating lease liabilities at the adoption date. See “Recent Accounting Standards” below for further discussion. Finance lease right-of-use assets are included in property and equipment, current maturities of finance lease liabilities, and finance lease liabilities, less current portion in the accompanying consolidated balance sheets at December 29, 2019 and December 30, 2018.

 

Right-of-use assets represent the Company’s right to use an underlying asset for the lease term and lease liabilities represent the Company’s obligation to make lease payments arising from the lease. Generally, lease right-of-use assets and liabilities are recognized at the beginning date of a lease based on the present value of lease payments over the lease term. The Company uses its incremental borrowing rate based on information that is available at the beginning date of a lease to determine the present value of lease payments, since its leases generally do not provide an implicit rate. The implicit rate is used when readily determinable. The Company excludes leases with terms of 12 months or less. The terms of the Company’s leases may include options to extend or terminate a lease when it is reasonably certain that the Company will exercise that option. The Company’s lease agreements with lease and non-lease components are generally accounted for on a combined basis. See Note 16 for further discussion.

 

Cash Surrender Value of Insurance Policies

 

Cash surrender value of insurance policies is valued at the cash surrender value of the contract as determined by the life insurance company. The cash value of the insurance policies totaled $597,551 and $420,404 as of December 29, 2019 and December 30, 2018, respectively. The Company has obtained loans against the cash value of certain of these insurance policies. At December 29, 2019 and December 30, 2018, these insurance policy loans totaled $460,841 and $211,790, respectively, and had a weighted average interest rate of 3.63% and 3.59%, respectively. The increase in the amount of insurance policy loans was due to $249,051 in loans obtained by the Company during the third quarter of 2019. Interest is accrued quarterly. Each loan (and applicable accrued interest) can be repaid at any time. Any loan (or interest) outstanding at the time of settlement will reduce the proceeds payable under the policies. The cash value of the insurance policies, net of policy loans, is included in other long-term assets in the accompanying consolidated balance sheets.

 

On April 1, 2018, the Company’s majority shareholder purchased the company owned life insurance policy on his life. The policy had a net value of $128,399 based on the cash surrender value of $578,490 and a policy loan outstanding in the amount of $450,091. After his assumption of a related party demand note payable in the amount of $125,000, the balance due of $3,399 was paid on April 17, 2018.

 

Impairment of Finite-Lived Long-Lived Assets

 

The Company reviews long-lived assets, including property, equipment, and intangible assets, for impairment at least annually or whenever events or changes in business circumstances indicate that the carrying amount of an asset may not be fully recoverable. An impairment loss would be recognized when the estimated future cash flows from the use of the asset are less than the carrying amount of that asset. During the fourth quarter of 2018, the Company recorded a $510,230 impairment charge for assets used in the calender operations at the Company’s U.K. subsidiary. The Company decided that it would de-commission the equipment and no longer offer the calendered product after determining that these operations could not be economically modernized. See Note 23 for additional information.

 

Goodwill and Intangible Indefinite-Lived Assets

 

Goodwill represents the excess of the purchase price over the estimated fair value of identifiable net assets acquired. Trademarks are recorded at estimated fair value at the date they were acquired in certain business acquisitions. To the extent it has been determined that the carrying value of the assets associated with goodwill or trademarks is not recoverable and is in excess of its fair value, an impairment loss is recognized. Impairment is reviewed at least annually. No impairment loss was deemed necessary as of December 29, 2019 or December 30, 2018.

 

 27 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Income Taxes

 

The Company follows ASC 740 Income Taxes for recording the provision for income taxes. Deferred tax assets and liabilities are computed based upon the difference between the financial statement and income tax bases of assets and liabilities (temporary differences) using the enacted marginal tax rate applicable when the related asset or liability is expected to be realized or settled. Deferred income tax expenses or benefits are based on the changes in the asset or liability each period. The Company reduces its deferred tax assets by a valuation allowance if it is more likely than not that some portion or all of a deferred tax asset will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which temporary differences are deductible. In making its valuation allowance determinations, the Company considers all available positive and negative evidence affecting specific deferred tax assets, including past and anticipated future performance, the reversal of deferred tax liabilities, the length of carryback and carryforward periods, and the implementation of tax planning strategies.

 

The tax effects from an uncertain tax position are recognized in the financial statements only if the position is more likely than not to be sustained on audit, based on the technical merits of the position. The Company recognizes the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more likely than not threshold, the amount recognized in the financial statements is the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement with the relevant tax authority. The Company does not believe there is any uncertainty with respect to its tax positions which would result in a material change to the financial statements.

 

The Company files income tax returns in the United States as a C-Corporation, and in several state jurisdictions and in the United Kingdom. The Company’s subsidiary, Uniroyal, is a limited liability company (LLC) for federal and state income tax purposes and as such, its income, losses, and credits pass through to its members. Uniroyal’s taxable income is allocated entirely to UEPH, a limited liability corporation, as its sole member.  As the sole member of UEPH, the Company then receives this income allocation less the dividends paid on the preferred ownership interests held by the former owners of Uniroyal.

 

The Company's tax returns for tax years 2016 and thereafter are subject to examination by taxing authorities. The Company records interest and penalties associated with uncertain tax positions related to these tax filings as interest expense. For the years ended December 29, 2019 and December 30, 2018, the Company has recorded no expense for interest or penalties.

 

Derivatives

 

The Company recognizes all of its derivative instruments as either assets or liabilities in the consolidated balance sheet at fair value. The accounting for changes in the fair value of a derivative instrument depends on whether it has been designated and qualifies as part of a hedging relationship and further, as to whether the hedge is a cash flow hedge or a fair value hedge.

 

The Company incurs foreign currency risk on sales and purchases denominated in other currencies, primarily the British Pound Sterling and the Euro. Foreign currency exchange contracts are used by the Company principally to limit the exchange rate fluctuations of the Euro. The Euro risk is partially limited due to natural cash flow offsets. Currency exchange contracts are purchased for approximately 25% of the net risk. These contracts are not designated as cash flow hedges for accounting purposes. Changes in fair value of these contracts are reported in other expense in the accompanying consolidated statements of operations. The fair values of the contracts at December 29, 2019 and December 30, 2018 were a net asset of $22,025 included in other current assets and a net liability of $26,814 included in other current liabilities, respectively.

 

Fair Value of Financial Instruments

 

The Company’s short-term financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable and lines of credit. The Company adjusts the carrying value of financial assets denominated in other currencies such as cash, accounts receivable, accounts payable and lines of credit using the appropriate exchange rates at the balance sheet date. The Company believes that the carrying values of these short-term financial instruments approximate their estimated fair values.

 

The fair value of the Company’s long-term debt is estimated based on current rates for similar instruments with the same remaining maturities. In determining the current interest rates for similar instruments, the Company takes into account its risk of nonperformance. The Company believes that the carrying value of its long-term debt approximates its estimated fair value.

 

 28 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The Company uses foreign currency exchange contracts which are recorded at their estimated fair values in the accompanying consolidated balance sheets. The fair values of the currency exchange contracts are based upon observable market transactions of spot and forward rates.

 

For the fiscal year ended December 29, 2019, there have been no changes in the application of valuation methods applied to similar assets and liabilities.

 

The Company follows accounting principles generally accepted in the United States of America for measuring, reporting, and disclosing fair value. These standards apply to all assets and liabilities that are measured, reported, and/or disclosed on a fair value basis.

 

Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date. The fair value hierarchy ranks the quality and reliability of the information used to determine fair values. Assets and liabilities measured, reported and/or disclosed at fair value will be classified and disclosed in one of the following three categories:

 

Level 1 -   Inputs to the valuation methodology are unadjusted quoted market prices for identical assets in active markets that the Company has the ability to access.

 

Level 2 -   Observable market based inputs or unobservable inputs that are corroborated by market data. Inputs to the valuation methodology include:

 

>quoted prices for similar assets or liabilities in active markets;
>quoted prices for identical or similar assets or liabilities in inactive markets;
>inputs other than quoted prices that are observable for the asset or liability;
>inputs that are derived principally from or corroborated by observable market data by correlation or other means.

 

Level 3 -      Unobservable inputs that are unobservable and not corroborated by market data.

 

The asset’s or liability’s fair value measurement level within the fair value hierarchy is based on the lowest level of any input that is significant to the fair value measurement. Valuation techniques used need to maximize the use of observable inputs and minimize the use of unobservable inputs.

 

Foreign Currency Translation

 

The financial position and results of operations of the Company’s foreign subsidiaries are measured using the local currency as the functional currency. Assets and liabilities of operations denominated in foreign currencies are translated into U.S. dollars at exchange rates in effect at the balance sheet date, while the capital accounts are translated at the historical rate for the date they were recognized. Revenues and expenses are translated at the weighted average exchange rates during the year. The resulting translation gains and losses on assets and liabilities are recorded in accumulated other comprehensive loss and are excluded from net income until realized through a sale or liquidation of the investment. Transaction gains and losses generated from the remeasurement of assets and liabilities denominated in currencies other than the functional currency of the Company’s foreign operations are included in other expense in the accompanying consolidated statements of operations.

 

Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosures of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

 29 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Revenue Recognition

 

The revenue recognition process begins when the Company receives a purchase order submitted by a customer. This represents the point in time at which a contract with the customer exists. The contract specifies the transaction price which is based on the amount of consideration the Company expects to receive in exchange for transferring control of a product to the customer. The Company does not have multiple performance obligations requiring it to allocate a transaction price. The performance obligation under the contract is the delivery of products. The performance obligation is satisfied and revenue is recognized when the Company transfers control of the products to its customers. For Uniroyal, this generally occurs when products are shipped and, for UGL, this generally occurs when the customer accepts delivery either at the Company’s U.K. facility or at a mutually agreed upon location. However, if the Company has an enforceable right to payment when the customer is contractually required to accept delivery of any remaining product at the end of a contract, but collectability of the revenue is uncertain, revenue recognition would occur upon agreement even if the product is not delivered to the customer. See Note 22 for further discussion.

 

Based on historical results and analysis, we estimate and calculate provisions for customer rebates and sales returns and allowances and record these estimated amounts as an offset to revenue in the same period the related revenue is recognized.

 

Shipping and Handling Costs

 

Shipping and handling costs charged to customers and the costs incurred by the Company are netted. Shipping and handling costs incurred by the Company for purchases are included in cost of goods sold.

 

Warranties

 

The Company warrants that the materials and workmanship of its products will meet customer specifications. The Company estimates its accrued warranty expenses based upon prior warranty claims experience. Accrued warranty expenses were not material as of December 29, 2019 and December 30, 2018.

 

Advertising

 

Advertising costs, other than promotional materials, are charged to expense as incurred. Promotional materials are expensed as they are distributed. Advertising expense was $136,161 and $185,496 for the years ended December 29, 2019 and December 30, 2018, respectively. As of December 29, 2019 and December 30, 2018, $87,707 and $113,927, respectively, of promotional materials were included in other long-term assets in the accompanying consolidated financial statements.

 

Research and Development

 

Research and development costs are charged to expense as incurred. Research and development expense was $1,634,385 and $1,653,234 for the years ended December 29, 2019 and December 30, 2018, respectively.

 

Earnings Per Share

 

The Company calculates basic net income per common share by dividing net income after the deduction of preferred stock or preference dividends by the weighted average number of common shares outstanding. The calculation of diluted net income per share is consistent with that of basic net income per common share but gives effect to all potential common shares (that is, securities underlying options, warrants or convertible securities) that were outstanding during the period, unless the effect is anti-dilutive.

 

Legal Proceedings

 

From time to time, the Company may be a party to claims, proceedings, and lawsuits related to products, services, contracts, employment, environmental, safety, intellectual property, and other matters. The ultimate resolution of such claims, proceedings, and lawsuits is inherently unpredictable and, as a result, the Company’s estimates of liability, if any, are subject to change. Actual results could differ materially from the Company’s estimates, and an unfavorable resolution of any matter could have a material adverse effect on the financial condition, results of operations and/or cash flows of the Company. The Company does not believe, based on the information currently available to it, that the ultimate resolution of any currently pending matters will have a material effect on the consolidated financial condition, results of operations, or cash flows of the Company.

 

Environmental Matters

 

The Company’s policy is to conduct its businesses with due regard for the preservation and protection of the environment. Management is not aware of any environmental matters relating to its operations that could materially affect liquidity, capital resources, or the financial condition of the Company.

 

 30 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Recent Accounting Standards

 

On February 25, 2016, the Financial Accounting Standards Board issued a new standard, Accounting Standards Update (“ASU”) No. 2016-02, “Leases,” on July 30, 2018, it issued ASU No. 2018-11, “Leases (Topic 842): Targeted Improvements” and on March 5, 2019, it issued ASU No. 2019-01, “Leases (Topic 842): Codification Improvements.” Under the new guidance, a lessee is required to recognize right-of-use assets and lease liabilities for leases with lease terms of more than 12 months. Consistent with previous U.S. generally accepted accounting principles (“GAAP”), the recognition, measurement, and presentation of expenses and cash flows arising from a lease by a lessee primarily depends on its classification as a finance or operating lease. However, unlike previous GAAP, which required only finance leases to be recognized on the balance sheet, the new ASU requires both types of leases to be recognized on the balance sheet. The Company adopted this standard on December 31, 2018. The Company elected to recognize and measure leases at the adoption date and recognize a cumulative-effect adjustment to the opening balance of retained earnings; however, no adjustment to the opening balance of retained earnings was needed. The Company elected the available practical expedients for leases that began before the effective date of this new standard except the Company did not elect to use hindsight in determining the lease term and in assessing impairment of its right-of-use assets. The Company elected to apply and adopt as an accounting policy to exclude leases with terms of 12 months or less and to not separate lease components from non-lease components. The adoption of this standard for the year ending December 29, 2019 had a significant effect on the Company’s consolidated financial position as it recorded previously unrecorded operating leases but it did not have a significant effect on its results of operations and cash flows.

 

On January 26, 2017, the Financial Accounting Standards Board issued a new standard, ASU No. 2017-04, “Intangibles – Goodwill and Other – Simplifying the Test for Goodwill Impairment.” The new standard modifies the concept of impairment from the condition that exists when the carrying amount of goodwill exceeds its implied fair value to the condition that exists when the carrying amount of a reporting unit exceeds its fair value. The Company adopted this standard on December 29, 2019. The adoption of this standard for the year ending December 29, 2019 did not have a significant effect on the Company’s consolidated financial position, results of operations and cash flows.

 

On August 28, 2018, the Financial Accounting Standards Board issued a new standard, ASU No. 2018-13, “Fair Value Measurement (Topic 820): Disclosure Framework—Changes to the Disclosure Requirements for Fair Value Measurement.” The new standard modifies the disclosure requirements on fair value measurements in Topic 820, “Fair Value Measurement.” Certain requirements were removed such as the amount of and reasons for transfers between Level 1 and Level 2 of the fair value hierarchy, certain requirements were modified and certain disclosures were added such as the changes in unrealized gains and losses for the period included in other comprehensive income for recurring Level 3 fair value measurements held at the end of the reporting period. The Company adopted this standard on December 30, 2019. Since this standard only revises disclosure requirements, the adoption of this standard for the year ending January 3, 2021 will not have a significant effect on the Company’s consolidated financial position, results of operations and cash flows.

 

On December 18, 2019, the Financial Accounting Standards Board issued a new standard, ASU No. 2019-12, “Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes.” This new guidance simplifies the accounting for income taxes by removing certain exceptions such as the exception to the incremental approach for intraperiod tax allocation when there is a loss from continuing operations and income/gain from other items; and the exception to the general methodology for calculating income taxes in an interim period when a year-to-date loss exceeds the anticipated loss for the year. The new guidance also simplifies the accounting for income taxes under certain circumstances such as requiring that an entity recognize a franchise tax that is partially based on income as an income-based tax and account for any incremental amount incurred as a non-income-based tax; requiring that an entity evaluate when a step up in the tax basis of goodwill should be considered part of a business combination in which the book goodwill was originally recognized and when it should be considered a separate transaction; and requiring that an entity reflect the effect of an enacted change in tax laws or rates in the annual effective tax rate computation in the interim period that includes the enactment date. This standard will be effective for the Company on January 4, 2021. The Company is currently evaluating the effects this standard will have, if any, on its consolidated financial position, results of operations and cash flows.

 

 31 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Subsequent Events

 

The Company has evaluated subsequent events occurring through the date that the financial statements were available to be issued, for events requiring recording or disclosure in the December 29, 2019 consolidated financial statements. There were no material events or transactions occurring during this period requiring recognition or disclosure other than the following:

 

On January 27, 2020, the Company announced a one-for-five reverse stock split on its common stock that became effective on February 24, 2020. Share and per share amounts have been adjusted to give effect to the reverse stock split. Adjusted for the reverse stock split, basic and diluted loss per share were $0.58 for the year ended December 29, 2019 and $0.50 for the year ended December 30, 2018. The amounts in common stock and additional paid-in capital will be adjusted as of the effective date of the one-for-five reverse stock split.

 

Subsequent to year-end 2019, the World Health Organization declared the novel coronavirus (COVID-19) outbreak a public health emergency.  There have been mandates from international, federal, state and local authorities requiring forced closures of various schools, businesses and other facilities and organizations. These forced closures could negatively impact the Company’s business.  While the closures and limitations on movement, domestically and internationally, are expected to be temporary, the duration of the supply chain disruption, and related financial impact, cannot be estimated at this time. Should the closures continue for an extended period of time or should the effects of the coronavirus continue to spread, the impact could have a material adverse effect on the Company’s financial position, results of operations and cash flows.

 

 32 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 2 - Noncash Transactions and Supplemental Disclosure of Cash Flow Information

 

During the years ended December 29, 2019 and December 30, 2018, the Company entered into several equipment financing obligations with fair values of $379,126 and $1,195,136, respectively, which are accounted for as capital assets. The fair values were added to property and equipment and a corresponding amount to related party lease financing obligation or long-term debt.

 

The Company adopted ASU No. 2016-02, “Leases” on December 31, 2018. Under this new standard, the Company was required to record on its balance sheet previously unrecorded operating leases based on the present value of remaining lease payments. Per this new standard, the Company recorded operating lease right-of-use (“ROU”) assets and operating lease liabilities of $6,799,271 on its consolidated balance sheet as of December 31, 2018. During the year ended December 29, 2019, the Company recorded new operating lease ROU assets and operating lease liabilities of $287,828 and removed terminated operating lease ROU assets and operating lease liabilities of $33,790. In addition, the Company recorded amortization of its operating lease ROU assets of $594,574 and amortization of its operating lease liabilities of $598,634. See Note 16 for additional information on operating leases.

 

During the third quarter of 2019, the Company obtained $249,051 in loans against the cash value of its company owned life insurance policies and are shown net of payments of $177,147 on the life insurance policies in the consolidated statements of cash flows. These loans have a weighted average interest rate of 3.66% and can be repaid at any time.

 

On April 1, 2018, the Company’s majority shareholder purchased the company owned life insurance policy on his life. The policy had a net value of $128,399 based on the cash surrender value of $578,490 and a policy loan outstanding in the amount of $450,091. After his assumption of a related party demand note payable in the amount of $125,000, the balance due of $3,399 was paid on April 17, 2018.

 

Supplemental disclosure of cash paid for the years ended:

   December 29, 2019  December 30, 2018
           
Interest  $1,987,522   $1,828,208 

 

NOTE 3 - Inventories

 

Inventories consist of the following:

 

   December 29, 2019  December 30, 2018
       
Raw materials  $5,430,125   $5,863,762 
Work-in-process   4,677,987    5,040,582 
Finished goods   10,922,947    10,049,567 
    21,031,059    20,953,911 
           
Less:  Allowance for inventory obsolescence   (1,914,517)   (1,493,651)
           
Total Inventories, net  $19,116,542   $19,460,260 

 

 33 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 4 - Property and Equipment

 

The major categories of property and equipment are summarized as follows:

 

   Depreciable
Lives
  December 29, 2019  December 30, 2018
Building and building improvements  8 – 25 yrs.  $1,419,495   $1,355,238 
Machinery and equipment  8 - 10 yrs.   30,396,418    30,106,102 
Computer equipment  3 - 10 yrs.   1,498,668    1,469,300 
Furniture and fixtures  7 - 10 yrs.   199,508    190,601 
Real estate under lease  20 yrs.   2,565,914    2,375,914 
Construction-in-progress  -   9,109    90,660 
              
Total Property and Equipment      36,089,112    35,587,815 
              
Less: Accumulated depreciation      (16,985,793)   (16,708,866)
              
Net Property and Equipment     $19,103,319   $18,878,949 

 

The balance of accumulated depreciation at December 30, 2018 reflected an impairment charge of $510,230 for assets used in the calender operations at the Company’s U.K. subsidiary. During the fourth quarter of 2018, the Company decided that it would de-commission the equipment and no longer offer the calendered product after determining that these operations could not be economically modernized. See Note 23 for additional information.

 

NOTE 5 - Intangible Assets

 

Intangible assets are summarized as follows:

 

   Amortizable
Lives
  December 29, 2019  December 30, 2018
          
Trademarks and trade names  Indefinite  $3,211,281   $3,148,830 
Other  5 years   52,500    69,167 
              
Total Intangible Assets     $3,263,781   $3,217,997 

 

 34 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 6 – Other Long-term Assets

 

Other long-term assets consist of the following:

   December 29, 2019  December 30, 2018
       
Deferred tax asset, net  $2,694,550   $2,899,634 
Other   794,763    793,733 
           
Total Other Long-term Assets  $3,489,313   $3,693,367 

 

NOTE 7 – Other Long-term Liabilities

 

Other long-term liabilities consist of the following:

   December 29, 2019  December 30, 2018
       
Deferred tax liability  $709,945   $640,219 
Other   5,363    13,434 
           
Total Other Long-term Liabilities  $715,308   $653,653 

 

NOTE 8 - Lines of Credit

 

The Company’s Uniroyal subsidiary has available a $30,000,000 revolving line of credit financing agreement with Wells Fargo Capital Finance, LLC (“Uniroyal Line of Credit”), which matures on June 15, 2023. Interest is payable monthly at the Eurodollar rate plus 2.25% or Wells Fargo Capital Finance, LLC's prime rate at the Company's election on outstanding balances up to $6,000,000 and prime rate on amounts in excess of $6,000,000. The line of credit weighted average interest rate including unused facility fees was approximately 5.53% as of December 29, 2019. Borrowings on the line of credit are subject to the underlying borrowing base specified in the agreement. The underlying borrowing base is currently determined based upon eligible accounts receivable, inventories and equipment. The line of credit is secured by substantially all of Uniroyal's assets and includes certain financial and restrictive covenants. The Company was in compliance with these covenants as of December 29, 2019.

 

The outstanding balance on the Uniroyal Line of Credit was $10,328,913 and $10,713,318 as of December 29, 2019 and December 30, 2018, respectively. The Company has classified the outstanding balance on this line of credit within current liabilities in the accompanying consolidated balance sheets.

 

The Company’s U.K. subsidiary has available a £10,000,000 (approximately $13.1 million) revolving line of credit financing agreement with Lloyds Bank Commercial Finance Limited (“U.K. Line of Credit”), which is subject to a six-month notice by either party. The line has several tranches based on currency or underlying security. Interest is payable monthly at the base rate (U.K. LIBOR or Lloyds Bank Base Rate as published) plus 1.95% to 2.45% depending on the tranche. The line of credit weighted average interest rate was approximately 2.63% as of December 29, 2019. Borrowings on the line of credit are subject to the underlying borrowing base specified in the agreement. The underlying borrowing base is currently determined based upon eligible accounts receivable and inventories. The line of credit is secured by substantially all of the subsidiary's assets and includes certain financial and restrictive covenants. The Company was in compliance with these covenants as of December 29, 2019.

 

 35 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The outstanding balance on the U.K. Line of Credit was £7,787,002 and £6,787,260 ($10,201,860 and $8,611,798) as of December 29, 2019 and December 30, 2018, respectively. The Company has classified the outstanding balance on this line of credit within current liabilities in the accompanying consolidated balance sheets.

 

NOTE 9 - Long-term Debt

 

Long-term debt consists of the following:

 

   December 29, 2019  December 30, 2018
       
Uniroyal term loans with Wells Fargo Capital
Finance, LLC, monthly interest only payments at the
Eurodollar rate plus 2.25% or Wells Fargo Bank,
National Association's prime rate. The term loans'
weighted average interest rate was approximately
5.53% as of December 29, 2019. Monthly principal
balances are reduced by $26,833 each month
resulting in a conversion, or increase, of the same
amount in the line of credit each month.
Term loans mature in June 2023 and are secured
by substantially all of the Company's assets and
include certain financial and restrictive covenants.
  $1,099,700   $1,413,898 
           
Term loan with Lloyds Bank Commercial Finance
Limited issued to the Company’s U.K. subsidiary at
£340,000 (approximately $445,400) payable in 60
monthly payments of £5,667 (approximately $7,424).
Interest is payable monthly at the rate of 3.15%
above the base rate (U.K. LIBOR). Monthly, the
principal is reduced by the required payment resulting in
an increase of the same amount in the line of credit.
The loan matured in February 2019 and was
secured by substantially all of the subsidiaries’
assets and included certain financial and restrictive
covenants.
   -    14,380 
           
Financing obligation to Kennet Equipment Leasing
payable in monthly installments of £16,636 ($21,795)
including interest and principal at a rate of 10.9%.
The loan matures in May 2021 and is secured by
certain equipment.
   238,514    451,173 
           
Notes payable to Regents Capital Corporation payable
in monthly installments of $3,256-$6,669 including
interest and principal at rates of 6.20%-7.24% with the
remaining principal due February 2022–February 2024.
The notes are secured by certain equipment.
   994,830    1,058,305 

 

 36 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Note payable to De Lage Landen Financial
Services payable in monthly installments of $2,658
including interest and principal at a rate of 7.35%
with the remaining principal due May 2021. The
note is secured by certain equipment.
   42,793    68,208 
           
Note payable to Ford Motor Credit payable in
monthly installments of $849 including interest and
principal at a rate of 4.31% with the remaining
principal due November 2021. The note is secured
by certain equipment.
   18,713    27,881 
           
Note payable to Byline Financial Group payable in
monthly installments of $1,999 including interest
and principal at a rate of 8.55%. The loan matured in
March 2019 and was secured by certain equipment.
   -    5,913 
           
Notes payable to BB&T Equipment Finance Corporation
payable in monthly installments of $4,691-$15,445
including interest and principal at rates of 4.02%-5.12%
with the remaining principal due October 2022-May 2023.
The notes are secured by certain equipment.
   671,704    879,600 
           
Note payable to Crown Credit Company payable in
monthly installments of $260 including interest
and principal at a rate of 7.06% with the remaining
principal due April 2024. The note is secured by
certain equipment.
   11,626    - 
           
Financing obligation to Lloyds Bank Commercial Finance Limited
payable in 60 monthly installments of £21,663 ($28,381) including
interest and principal at a rate of 3.95%. The loan matures in
November 2024 and is secured by certain equipment.
   1,519,556    1,344,801 
           
Note payable to Lloyds Bank Commercial Finance Limited
payable in monthly installments of £1,148 ($1,504)
including interest and principal at a rate of 4.23% with the
remaining principal due August 2023. The loan is secured
by certain equipment.
   60,971    73,562 
           
Notes payable to Lloyds Bank Commercial Finance Limited
payable in monthly installments of £1,756-£3,932 ($2,301-
$5,151) including interest and principal at a rate of 3.50%
above the base rate (U.K. LIBOR) with the remaining principal
due December 2021-July 2022. The loans are secured by certain
equipment.
   217,211    - 
           
Total   4,875,618    5,337,721 
           
Less: Current portion   (1,497,160)   (1,369,967)
           
Long-term portion  $3,378,458   $3,967,754 

 

 37 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Principal requirements on long-term debt for years ending after December 29, 2019 are as follows:

 

   Totals
    
2020  $1,497,160 
2021   1,331,573 
2022   1,112,869 
2023   615,844 
2024   318,172 
Thereafter   - 
      
Total  $4,875,618 

 

 38 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 10 - Related Party Obligations

 

Long-term debt to related parties consists of the following:

 

   December 29, 2019  December 30, 2018
       
Senior subordinated promissory notes issued to the
Company’s majority shareholder; monthly interest
only payments at 9.25%; principal payment of
$2,000,000 due on January 15, 2021. The senior
subordinated promissory notes are secured by
substantially all of the Company’s assets subject to the
notes' subordination to the line of credit and term
loans with Wells Fargo Capital Finance, LLC.
  $2,000,000   $2,000,000 
           
Senior secured promissory note issued to the
Company’s majority shareholder; quarterly interest
payments at 10%; principal payment of $765,655 due
on January 15, 2021. The note is secured by substantially
all of the Company’s assets.
   765,655    765,655 
           
Subordinated secured promissory note issued to the
Company’s majority shareholder; quarterly interest
payments at 8%; principal payment of $225,000 due
on January 15, 2021. The note is secured by substantially
all of the Company’s assets.
   225,000    225,000 
           
Subordinated secured promissory note issued to the
Company’s majority shareholder; quarterly interest
payments at 8%; principal payment of $200,000 due
on January 15, 2021. The note is secured by substantially
all of the Company’s assets.
   200,000    - 
           
Total   3,190,655    2,990,655 
           
Less: Current portion   -    - 
          
Total Long-term Debt to Related Parties  $3,190,655   $2,990,655 

 

 39 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The Company has a lease financing obligation under which it leases its main U.S. manufacturing facility and certain other property from a related party lessor entity, owned by the Company’s majority shareholder. The lease financing obligation accrues interest at 14.95% and currently requires monthly principal and interest payments of $45,533, which are adjusted annually based on the consumer price index. The balance of the related party lease financing obligation at December 29, 2019 reflected changes made to the lease agreement during 2019 in recognition of $190,000 of improvements to the leased facility. The lease financing obligation matures on October 31, 2033. The Company has security deposits aggregating $267,500 held by the lessor entity.

 

The lease financing obligation consists of the following:

 

   December 29, 2019  December 30, 2018
       
Related party lease financing obligation  $2,780,487   $2,697,871 
           
Less: Current portion   (133,517)   (84,154)
           
Long-term portion  $2,646,970   $2,613,717 

 

The long-term portion of the lease financing obligation is shown in the accompanying consolidated balance sheets as related party lease financing obligation. The current portion of the lease financing obligation and the remaining balance of related party short-term subordinated secured promissory notes are combined and are shown in current liabilities as related party obligation which consists of the following:

 

   December 29, 2019  December 30, 2018
       
Current portion of related party lease financing
obligation
  $133,517   $84,154 
           
Related party subordinated secured promissory note   350,000    - 
           
Related party subordinated secured promissory note   125,000    - 
           
Related Party Obligation  $608,517   $84,154 

 

During 2019, the Company issued $1,150,000 of short-term subordinated secured promissory notes to the Company’s majority shareholder at a rate of 10%. As of December 29, 2019, $675,000 of these notes were repaid. On January 13, 2020, the Company’s majority shareholder advanced $200,000 to the Company. This advance was repaid in February 2020.

 

During 2018, the Company issued $272,000 of short-term subordinated secured promissory notes to the Company’s majority shareholder at a rate of 8%. In December 2018, $225,000 of these notes were amended to change the maturity date to January 15, 2021 and reclassified to long-term debt to related parties. The remaining balance of the notes issued during 2018 ($47,000) and the notes outstanding at the beginning of 2018 ($125,000) were repaid during 2018.

 

 40 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Principal payments on the lease financing obligation, short-term subordinated secured promissory notes and the aforementioned long-term debt to related parties for years ending after December 29, 2019 are as follows:

 

   Totals
2020  $608,517 
2021   3,333,222 
2022   160,166 
2023   167,836 
2024   104,948 
Thereafter   2,071,453 
      
Total  $6,446,142 

 

NOTE 11 – Income Taxes

 

The Company files income tax returns in the United States as a C-Corporation, and in several state jurisdictions and in the United Kingdom. The Company’s subsidiary, Uniroyal, is a limited liability company (LLC) for federal and state income tax purposes and as such, its income, losses, and credits pass through to its members. The Company made the acquisition of Uniroyal through UEPH, a limited liability corporation, which issued preferred ownership interests to the sellers that provide for quarterly dividends. Uniroyal’s taxable income is allocated entirely to UEPH as its sole member and since it is a pass-through entity, this income less the dividends paid to the sellers of Uniroyal is reported on the Company’s tax return. The taxable income applicable to the dividends for the preferred ownership interests is reported to the sellers who report it on their respective individual tax returns.

 

 41 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The benefit for income taxes for the years ended December 29, 2019 and December 30, 2018 were:

 

   December 29, 2019  December 30, 2018
Current      
Federal  $-   $- 
State, net   3,570    5,796 
Foreign   (359,459)   (363,428)
Total current income tax benefit   (355,889)   (357,632)
Deferred          
Federal   201,756    266,925 
State   3,328    8,057 
Foreign   47,606    (109,742)
Total deferred income tax provision   252,690    165,240 
Total income tax benefit  $(103,199)  $(192,392)

 

The state provisions of $51,012 and $94,533 for the years ended December 29, 2019 and December 30, 2018, respectively, were reduced by a reduction of the valuation allowance in the amounts of $44,114 and $80,680, respectively. The benefit for income taxes differs from the amount computed by applying the federal statutory income tax rate to income before income taxes. The Company’s effective income tax rate, computed as the total of federal, state and foreign taxes as a percentage of income before taxes, was a negative 12.0% and negative 18.2% for the years ended December 29, 2019 and December 30, 2018, respectively.

 

The following is a reconciliation of the income tax at the U.S. federal statutory tax rate with the income tax at the effective tax rate for the years ended December 29, 2019 and December 30, 2018:

   December 29, 2019  December 30, 2018
       
Income tax at statutory rates  $180,227   $221,425 
           
Foreign tax rate differential   22,122    35,417 
UEPH preference dividend   (210,753)   (326,376)
U.K. Research and development credit   (171,130)   (163,903)
Effect of change in U.K. tax rate on deferred items   7,514    13,214 
Prior year true-up   61,923    13,978 
State tax provisions   51,012    94,533 
Valuation allowance   (44,114)   (80,680)
Income tax benefit  $(103,199)  $(192,392)
           
Effective income tax rate   (12.0)%   (18.2)%

 

 42 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The following table summarizes the tax effects of temporary differences that give rise to significant portions of the deferred tax assets and liabilities:

 

   December 29, 2019  December 30, 2018
       
Deferred tax assets:      
Net operating loss carryforward  $3,872,437   $3,991,036 
  Total deferred tax assets   3,872,437    3,991,036 
Deferred tax liabilities:          
Trademarks   (336,817)   (326,200)
Deferred gain   (157,850)   (161,104)
Capital allowances   (652,347)   (428,233)
  Total deferred tax liabilities   (1,147,014)   (915,537)
Valuation allowance   (740,818)   (816,084)
Net deferred tax assets  $1,984,605   $2,259,415 

 

Deferred tax assets as of December 29, 2019 and December 30, 2018 include $3,435,368 and $3,715,718, respectively, of carryforwards related to U.S. net operating losses and $437,069 and $275,318, respectively, of carryforwards resulting from U.K. losses. The $3,435,368 and $3,715,718 of deferred tax assets for U.S. losses, net of valuation allowances of $740,818 and $816,084 as of December 29, 2019 and December 30, 2018, respectively, are included in other long-term assets. The $437,069 and $275,318 of deferred tax assets for U.K. losses are netted with deferred tax liabilities, which are all related to U.K. tax. Total net deferred tax liabilities of $709,945 and $640,219 are included in other long-term liabilities in the accompanying consolidated balance sheets as of December 29, 2019 and December 30, 2018, respectively.

 

The Company has federal and state net operating loss carryforwards of approximately $11.7 million and $13.8 million, respectively, as of December 29, 2019, which expire in years beginning 2021 through 2034. The Company has foreign net operating loss carryforwards of approximately $2.2 million as of December 29, 2019, which have no expiration date.

 

The Company reduces its deferred tax assets by a valuation allowance if it is more likely than not that some portion or all of a deferred tax asset will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which temporary differences are deductible. In making its valuation allowance determinations, the Company considers all available positive and negative evidence affecting specific deferred tax assets, including past and anticipated future performance, the reversal of deferred tax liabilities, the length of carryback and carryforward periods, and the implementation of tax planning strategies. Management has determined that there is uncertainty as to the realization of the state net operating loss carryforward and has established a valuation allowance against the state net operating loss carryforward.

 

NOTE 12 - Postretirement and Postemployment Benefit Liabilities

 

Postretirement Benefit Liability - Health and Life

 

The Company provides certain health care and life insurance benefits for substantially all employees (active or retired) who were employed prior to February 20, 1987. Accounting standards for postretirement benefits require an employer to: (a) recognize in its statement of financial position an asset for a plan’s overfunded status or a liability for a plan’s underfunded status; (b) measure a plan’s assets and its obligations that determine its funded status as of the end of the employer’s fiscal year (with limited exceptions); and (c) recognize changes in the funded status of a defined benefit postretirement plan in the year in which the changes occur. Those changes will be reported in comprehensive income of a business entity.

 

 43 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The accumulated postretirement benefit obligation, plan assets and accrued postretirement liability as of the plan's measurement date are as follows:

 

   December 29, 2019  December 30, 2018
       
Postretirement Benefit Liability - Health and Life  $2,753,520   $3,077,580 
Less: Plan assets   -    - 
           
Accrued postretirement benefit cost   2,753,520    3,077,580 
Less: Unrecognized net gain   (5,694)   (836,593)
           
Accumulated postretirement benefit obligation   2,747,826    2,240,987 
           
Less: Current portion   (155,803)   (139,095)
           
Long-term Portion  $2,592,023   $2,101,892 

 

Net postretirement benefit income for the plan is comprised of the following:

 

   December 29, 2019  December 30, 2018
       
Service cost  $-   $- 
Interest cost on projected benefit obligation   82,949    84,585 
Amortization of prior service cost   -    - 
Amortization of net gain   (294,468)   (119,324)
           
Net postretirement benefit income  $(211,519)  $(34,739)

 

Reconciliation of gains (losses) in other comprehensive loss is as follows:

 

   December 29, 2019  December 30, 2018
       
Net actuarial gain (loss)  $(536,431)  $391,160 
Amortization of actuarial gain   (294,468)   (119,324)
           
Postretirement benefit liability adjustment in other comprehensive
loss
  $(830,899)  $271,836 

 

At December 29, 2019, there is $5,694 of unrecognized net actuarial gains in accumulated other comprehensive loss that has not yet been recognized as a component of net periodic benefit costs. At December 29, 2019, there is no amount of net actuarial gains in accumulated other comprehensive income that is expected to be recognized as a component of net periodic benefit costs during 2020.

 

 44 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The significant assumptions used in determining the accumulated postretirement benefit obligation and net periodic benefit cost are as follows:

 

   December 29, 2019  December 30, 2018
Health Care Cost Trend Rates:      
2019  4.00%  4.00%
Thereafter  4.00%  4.00%
Discount rate  2.80%  3.82%
Measurement Date  December 29, 2019  December 30, 2018

 

In addition to the significant assumptions listed above, other assumptions used in determining the accumulated postretirement benefit obligation and net periodic benefit cost are retirement and termination probabilities and mortality estimates. The Company assumes that employees participating in the plan will continue to participate during retirement. The Company also assumes that employees not participating in the plan will not participate in the plan prior to or during retirement.

 

Employer and employee contributions to the plan were $116,928 and $10,071, respectively, during the year ended December 29, 2019 and $147,358 and $16,237, respectively, during the year ended December 30, 2018. Contributions to the plan are made each year based on estimated benefit payments to be paid out of the plan. Estimated benefit payments from the plan for each of the next five years, and in the aggregate for the five years thereafter, are as follows:

 

2020  $155,803 
2021   161,946 
2022   164,701 
2023   164,831 
2024   163,017 
2025 - 2029   811,460 
      
Total  $1,621,758 

 

Postemployment Benefit Liability - Severance

 

The Company provides certain severance benefits for substantially all union employees who began their employment prior to 1986. Accounting standards for postemployment benefits require the Company to accrue the estimated cost of future severance payments during the years the employees provide services. The accrued postemployment benefit liability as of December 29, 2019 and December 30, 2018 was $5,363 and $13,434, respectively, and is included in other long-term liabilities in the accompanying consolidated balance sheets. The accrued postemployment benefit liability was determined using discount rates of 2.80% and 3.82% as of December 29, 2019 and December 30, 2018, respectively.

 

 45 

 

 UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 13 - Equity

 

The following table summarizes the Company’s common stock outstanding by class. The number of shares have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. See Note 1 for additional information.

 

   December 29, 2019  December 30, 2018
Ordinary Common Stock   3,412,186    3,414,186 
Class B Common Stock   323,820    323,820 
Total   3,736,006    3,738,006 

 

The Company’s Class B Common Stock (“Class B”) has the same entitlement to dividends as they may be declared for the ordinary common stock. The holder of Class B was the holder of UGEP preferred stock that was converted to Class B on December 30, 2015. The Class B does not have any preference with respect to holders of other equity interests in the Company in the event of any liquidation, dissolution or winding up of the Company. Each share of Class B has the right to 22 votes on matters that come before the shareholders. Each share of Class B is convertible into one share of ordinary common stock at any time. The shares of Class B are not registered and do not trade in the open market.

 

Acquisition

 

On November 10, 2014, the Company acquired Uniroyal and UGEL (previously EPAL), the holding company for UGL (previously Wardle Storeys). Pursuant to the acquisition of Uniroyal, 200,000 units of Series A preferred units and 150,000 units of Series B preferred units of UEP Holdings LLC, a wholly-owned subsidiary of the Company, were issued to the former owners of Uniroyal.  Each of the UEP Holdings Series A and Series B preferred units have an issue price of $100 per unit or a total face value of $20,000,000 and $15,000,000, respectively. The UEPH Series A preferred units are entitled to a preferred return of an amount per annum equal to five percent (5.00%) of the issue price of such UEPH Series A preferred unit. The UEPH Series B preferred units are entitled to a preferred return of an amount per annum equal to five and one half percent (5.50%) of the issue price of such UEPH Series B preferred unit, increasing by one half percent (0.50%) on the first anniversary of the effective date and by an additional one half percent (0.50%) on each successive anniversary of the effective date thereafter, up to a maximum of eight percent (8.00%) on the fifth anniversary of the effective date. As of December 29, 2019, the preferred return percentage of the UEPH Series B preferred units is 8.0%.

 

In a separate transaction, the Company also purchased all of the outstanding 50 common shares of UGEL, a U.K. limited company, for 100 shares of its common stock and its guaranty of outstanding UGEL preferred stock retained by the seller, having a liquidation preference of €17,699,314 (approximately $19,740,045). As part of the transaction, 50 shares of the UGEL common stock held by the seller had been converted and reclassified as preferred shares. These preferred shares are entitled to a quarterly dividend payment of €221,241 (approximately $246,750).

 

NOTE 14 – Stock-Based Compensation

 

On June 25, 2015, the Company’s stockholders approved the adoption of the 2015 Stock Option Plan. This plan provides for the granting of options to purchase the Company’s common stock to employees and directors. The options granted are subject to a vesting schedule as set forth in each individual option agreement. Each option expires on the tenth anniversary of its date of grant unless an earlier termination date is provided in the grant agreement. The maximum aggregate number of shares of common stock that may be optioned and sold under the plan shall be 6% of the shares outstanding on the date of grant. The shares that may be optioned under the plan may be authorized but unissued or may be treasury shares.

 

Compensation expense is recognized on a straight-line basis over a three-year vesting period from date of grant.

 

On a quarterly basis, the Company assesses changes to its estimate of expected option award forfeitures based on its review of recent forfeiture activity and expected future employee turnover. The Company recognizes the effect of adjustments made to the forfeiture rates, if any, in the period that it changes the forfeiture estimate.  For the year ended December 29, 2019, there were no forfeiture rate adjustments and future adjustments are not expected to be significant.

 

 46 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

The following table presents stock option activity for the years ended December 29, 2019 and December 30, 2018. The number and weighted average exercise price of options have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. See Note 1 for additional information.

 

   Stock Options 
   Total   Weighted
Average
Exercise
Price
   Exercisable   Weighted
Average
Exercise
Price
   Non-
Vested
   Weighted
Average
Exercise
Price
 
Outstanding at December 31, 2017   192,300   $13.98    105,433   $13.15    86,867   $15.00 
Granted   -    -    -    -    -    - 
Vested   -    -    63,101   $13.98    (63,101)  $13.98 
Exercised   -    -    -    -    -    - 
Forfeited or cancelled   (3,000)  $13.85    (1,667)  $13.05    (1,333)  $14.85 
Outstanding at December 30, 2018   189,300   $13.98    166,867   $13.46    22,433   $17.85 
Granted   -    -    -    -    -    - 
Vested   -    -    22,433   $17.85    (22,433)  $17.85 
Exercised   -    -    -    -    -    - 
Forfeited or cancelled   (37,500)  $13.85    (37,500)  $13.85    -   $- 
Outstanding at December 29, 2019   151,800   $14.02    151,800   $14.02    -   $- 
                               
Aggregate Intrinsic Value
  December 30, 2018
  $-        $-        $-      
                               
Aggregate Intrinsic Value
 December 29, 2019
  $-        $-        $-      

 

As of December 29, 2019 and December 30, 2018, there was no aggregate intrinsic value of the options outstanding because the options’ exercise prices of $11.85 and $17.85 per share (as adjusted for the reverse stock split) were greater than the average market prices of the common shares.

 

Option expense recognized was $44,166 and $299,798 for the years ended December 29, 2019 and December 30, 2018, respectively. As of December 29, 2019, there was no unrecognized compensation cost related to the options granted under the 2015 Stock Option Plan.

 

 47 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 15 – Loss Per Common Share

 

The following table sets forth the computation of loss per common share - basic and loss per common share – diluted for the years ended December 29, 2019 and December 30, 2018. Share and per share amounts have been adjusted to reflect a one-for-five reverse stock split that became effective on February 24, 2020. See Note 1 for additional information.

 

   December 29, 2019  December 30, 2018
Numerator          
           
Net loss allocable to common shareholders  $(2,165,073)  $(1,859,186)
           
Denominator          
           
Denominator for basic earnings
per share - weighted average
shares outstanding
   3,736,742    3,738,006 
Weighted average effect of
dilutive securities
   -    - 
Denominator for dilutive earnings
per share - weighted average
shares outstanding
   3,736,742    3,738,006 
           
Basic and Diluted Net Loss Per Share          
Net loss allocable to common shareholders  $(0.58)  $(0.50)
           
Effect of dilutive securities   (0.00)   (0.00)
           
Net loss allocable to common shareholders  $(0.58)  $(0.50)

 

Due to the net loss for each of the years ended December 29, 2019 and December 30, 2018, the calculations of basic and diluted loss per share were the same since including options to purchase shares of the Company’s common stock in the calculations of diluted loss per share would have been anti-dilutive. However, if diluted earnings per share had been reported for the years ended December 29, 2019 and December 30, 2018, the calculations would have excluded options to purchase 151,800 and 189,300 shares of common stock, respectively, because the options’ exercise prices of $11.85 and $17.85 (as adjusted) per share were greater than the average market prices of the common shares.

 

 48 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 16 – Leases

 

The Company has operating leases for equipment and office facilities and finance leases for equipment. These leases expire at various dates from January 2020 through March 2039.

 

The components of lease expense for the years ended December 29, 2019 and December 30, 2018 are as follows:

 

   Years Ended 
   December 29, 2019   December 30, 2018 
         
Operating lease expense  $1,028,719   $1,075,788 
           
Finance lease expense:          
Amortization of right-of-use assets  $149,580   $142,265 
Interest on lease liabilities   16,625    39,452 
Total finance lease expense  $166,205   $181,717 

 

Cash paid for amounts included in the measurement of lease liabilities for the years ended December 29, 2019 and December 30, 2018 are as follows:

 

   Years Ended 
   December 29, 2019   December 30, 2018 
         
Operating cash flows from operating leases (1)  $971,329   $- 
Operating cash flows from finance leases  $16,625   $39,452 
Financing cash flows from finance leases  $391,337   $403,821 

 

Right-of-use assets obtained in exchange for lease obligations for the years ended December 29, 2019 and December 30, 2018 are as follows:

 

   Years Ended 
   December 29, 2019   December 30, 2018 
         
Operating leases (1)  $287,828   $- 
Finance leases  $-   $- 

 

Supplemental balance sheet and other information related to operating leases are as follows (1):

 

   December 29, 2019 
Operating leases:     
Operating lease right-of-use assets  $6,607,963 
Accrued expenses and other liabilities  $497,225 
Operating lease liabilities   6,106,568 
Total operating lease liabilities  $6,603,793 
Weighted average remaining lease term   15.7 years 
Weighted average discount rate   7.16% 

 

(1)There is no comparable information for operating leases at or for the year ended December 30, 2018 since the Company adopted ASU No. 2016-02 on December 31, 2018 and elected to recognize operating lease right-of-use assets and operating lease liabilities at the adoption date.

 

 49 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

Supplemental balance sheet and other information related to finance leases are as follows:

 

   December 29, 2019  December 30, 2018
Finance leases:          
Property and equipment, net  $1,305,798   $1,413,405 
Current maturities of finance lease liabilities  $106,253   $388,862 
Finance lease liabilities, less current portion   6,397    109,446 
Total finance lease liabilities  $112,650   $498,308 
Weighted average remaining lease term   0.5 year    1.3 years 
Weighted average discount rate   6.06%    6.41% 

 

Maturities of operating and finance lease liabilities as of December 29, 2019 are as follows:

 

   Operating Leases  Finance Leases
Due in one year or less  $946,619   $108,445 
Due after one year through two years   857,969    6,497 
Due after two years through three years   826,433    - 
Due after three years through four years   650,906    - 
Due after four years through five years   524,639    - 
Thereafter   8,012,584    - 
Total lease payments   11,819,150    114,942 
Less: Interest   (5,215,357)   (2,292)
Total  $6,603,793   $112,650 

 

 50 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 17 – Accumulated Other Comprehensive Loss

 

The changes in accumulated other comprehensive loss were as follows:

 

   Minimum
Benefit Liability
Adjustments
  Foreign Currency
Translation
Adjustment
  Total
Balance at December 31, 2017  $564,757   $(939,909)  $(375,152)
                
Other comprehensive gains (losses)
   before reclassifications
   391,160    (599,329)   (208,169)
                
Reclassification adjustment for
   gains included in net income
   (119,324)   -    (119,324)
                
Balance at December 30, 2018   836,593    (1,539,238)   (702,645)
                
Other comprehensive gains (losses)
   before reclassifications
   (536,431)   236,105    (300,326)
                
Reclassification adjustment for
   gains included in net income
   (294,468)   -    (294,468)
                
Balance at December 29, 2019  $5,694   $(1,303,133)  $(1,297,439)

 

The gains reclassified from accumulated other comprehensive loss are recorded to the following line items in the consolidated statements of operations:

 

Other Comprehensive Loss Component Consolidated Statements of Operations Line Item
Minimum Benefit Liability Adjustments General and administrative expense

 

NOTE 18 - Retirement Plans

 

The Company has a 401(k) plan which covers substantially all non-union U.S. employees. The Company contributions to this plan included in expense were $85,000 and $75,000 for the years ended December 29, 2019 and December 30, 2018, respectively.

 

The U.K. employees are covered by a separate plan which meets the statutory minimum requirements and provides that the Company will contribute a percentage of the employee’s compensation based on the percentage contributed to the plan by the employee. These statutory minimum requirements for both the employees and the Company are being phased in over time. Employees may opt out of the plan if they do not want to contribute the minimum required amount. Generally, for salaried employees hired prior to July 2015, the schedule of minimum required contributions is as follows:

 

Phase in Period Employee Company
Prior to April 2018 2% 6%
April 2018 to April 2019 3%/4% 7%/7 ½%
After April 2019 5% 8%

 

 51 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

For all salaried employees hired after June 2015 and all wage employees, the schedule of minimum required contributions is as follows:

 

Phase in Period Employee Company
Prior to April 2018 1% 1%
April 2018 to April 2019 3% 2%
After April 2019 5% 3%

 

The Company made contributions of £295,603 ($377,117) and £324,457 ($433,268) to the U.K. plan for the years ended December 29, 2019 and December 30, 2018, respectively.

 

NOTE 19 - Concentrations

 

Labor Union

 

The United Steel Workers International Union AFL-CIO, CLC Local #1207 represents the Company’s manufacturing employees in the U.S. The current union contract expires on March 12, 2023. The contract will continue from year-to-year thereafter, unless notice terminating the agreement is given by either party sixty days prior to March 12th in any year after March 12, 2023. Employees at the U.K. facility can be represented by UNITE although participation is not required. The collective bargaining agreement with UNITE does not specify a termination date.

 

Major Customers

 

Sales to ten industry suppliers accounted for 46.2% and 46.8% of total Company sales during the years ended December 29, 2019 and December 30, 2018, respectively. Accounts receivables from these customers totaled 52.8% and 52.2% of  receivables as of December 29, 2019 and December 30, 2018, respectively.

 

Major Suppliers

 

The Company purchases a significant quantity of its raw materials from certain major suppliers. Management believes this concentration does not pose a significant risk to the Company's operations as other suppliers are readily available. See Note 1 for further discussion.

 

NOTE 20 - Related Party Transactions

 

The Company has debt and a lease financing obligation to a related party. See Note 10 for further discussion.

 

Related party receivable is short-term advances to employees. There was no related party receivable at December 29, 2019 and $20,118 at December 30, 2018 which was repaid in 2019.

 

The Company’s chief financial officer, who is also on the Company’s Board of Directors, does not have a written employment agreement and works on a part-time basis for the Company.  The Company expensed $24,000 as a consulting fee to a company controlled by him in each of the years ended December 29, 2019 and December 30, 2018. There was $13,500 and $46,500 in prepaid expenses relating to this fee at December 29, 2019 and December 30, 2018, respectively.

 

NOTE 21 - Employment Agreements

 

The Company has employment agreements with three management employees as of December 29, 2019. The initial term of the employment agreements is three years. The term can be renewed or extended as provided for in the employment agreements. The agreements include various benefits to be provided to the employees including salary, bonus, life insurance and severance benefits.

 

 52 

 

UNIROYAL GLOBAL ENGINEERED PRODUCTS, INC.

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

As of and for the Years Ended December 29, 2019 and December 30, 2018

 

NOTE 22 – Revenue

 

The Company recognizes revenue and related accounts receivable when obligations under the terms of a contract with a customer are satisfied, which includes the control of products transferring to the customer. For Uniroyal, this generally occurs when products are shipped and, for UGL, this generally occurs when the customer accepts delivery either at the Company’s U.K. facility or at a mutually agreed upon location. Revenue is measured as the amount of consideration the Company expects to receive in exchange for products transferred to the customer.

 

The following table sets forth revenue disaggregated by the Company’s automotive and industrial sectors for the years ended December 29, 2019 and December 30, 2018:

 

   Years Ended
   December 29, 2019  December 30, 2018
Revenue by product sector:      
Automotive  $59,177,764   $65,946,489 
Industrial   31,958,480    33,614,232 
Total Revenue  $91,136,244   $99,560,721 

 

The following table sets forth revenue disaggregated by the geographic locations of the Company’s customers for the years ended December 29, 2019 and December 30, 2018:

 

   Years Ended
   December 29, 2019  December 30, 2018
Revenue by customer location:          
North America  $44,492,947   $47,346,984 
Europe   41,209,589    46,466,159 
Asia   5,128,851    5,476,345 
Other   304,857    271,233 
Total Revenue  $91,136,244   $99,560,721 

 

NOTE 23 – Restructuring Expenses

 

In order to increase operating efficiencies and decrease costs, the Company developed a plan to restructure the operations and the management team of its foreign operations located in Earby, England. As part of this restructuring, the Company announced the decommissioning of the calender operations which could not be economically modernized. An impairment charge of $510,230 for the assets used in this operation was included in the operating results for the year ended December 30, 2018. The decommissioning plan was implemented over an extended period to permit existing customers time to arrange for alternate sources of product or for them to switch to one of the Company’s other coated fabric solutions from its state-of-the art production facility. The final calender run was in August 2019. The Company reduced its work force but also offered a retraining program to allow a limited number of employees the opportunity to move to other production areas within the facility. The cost associated with this aspect of the plan was not significant and was expensed as incurred. Also, as part of the restructuring, during the quarter ended March 31, 2019, the Company entered into settlement agreements with certain members of that facility’s management team which terminated their continuing service. The Company recorded a charge of $343,003 for the cost of these agreements which is included in other operating expenses in the accompanying consolidated statements of operations for the year ended December 29, 2019.

 

 53 

 

ITEM 9.               CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

 

None.

 

ITEM 9A.CONTROLS AND PROCEDURES

 

Evaluation of Disclosure Controls and Procedures

 

The Company maintains “disclosure controls and procedures” as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”), that are designed to ensure that information required to be disclosed by us in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms, and that such information is accumulated and communicated to our management, including our Chief Executive Officer, Chief Financial Officer, and Board of Directors, as appropriate, to allow timely decisions regarding required disclosure. In designing and evaluating our disclosure controls and procedures, management recognizes that disclosure controls and procedures, no matter how well conceived and operated, can provide only reasonable assurance of achieving the desired objectives, and we necessarily are required to apply our judgment in evaluating the cost-benefit relationship of possible disclosure controls and procedures.

 

Our management, including our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of the design and operation of our disclosure controls and procedures as of December 29, 2019 and concluded that our disclosure controls and procedures were effective as of December 29, 2019.

 

Management’s Annual Report on Internal Control over Financial Reporting

 

The Company’s management is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rule 13a-15(f) of the Securities Exchange Act of 1934. The Company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with United States generally accepted accounting principles. Internal control over financial reporting includes policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with United States generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisitions, use or disposition of the Company’s assets that could have a material effect on the financial statements.

 

Management assessed the effectiveness of the Company’s internal control over financial reporting as of December 29, 2019. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control-Integrated Framework published in 2013. Based on this assessment, and on those criteria, management concluded that the Company’s internal control over financial reporting was effective as of December 29, 2019.

 

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this annual report.

 

 54 

 

Changes in Internal Controls over Financial Reporting

 

During the year ended December 29, 2019, there were no changes in the Company’s internal control over financial reporting (as defined in Rule 13a-15(f) and 15d–15(f) under the Exchange Act) that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

ITEM 9B.OTHER INFORMATION

 

None.

 

PART III

 

ITEM 10.DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

 

Directors and Executive Officers of the Company

 

Information required by this Item concerning  the Company’s directors and all persons nominated for election as directors at the Company’s Annual Meeting of Stockholders (the “2020 Annual Meeting”)  will be included in the section of  the Company’s Definitive Proxy Statement in connection with our 2020 Annual Meeting (the “2020 Proxy Statement”) , which will be filed with the SEC within 120 days after our fiscal year end of December 29, 2019,  entitled “Election of Directors”  and is incorporated herein by reference.  Information required by this Item concerning the Company’s executive officers will be set forth in the section of our 2020 Proxy Statement entitled “Executive Officers and Significant Employees” and is incorporated herein by reference.

 

Corporate Governance

 

Information required by this Item concerning the Audit Committee and the Audit Committee’s financial expert will be included in the section of our 2020 Proxy Statement entitled “Committees of the Board of Directors” and is incorporated herein by reference.

 

Section 16(a) Compliance

 

Information required by this Item concerning compliance with Section 16(a) of the Securities Exchange Act of 1934, as amended, will be included in the section of our 2020 Proxy Statement entitled “Compliance with Section 16(a) of the Exchange Act” and is incorporated herein by reference.

 

Code of Ethics

 

Our board of directors has adopted a Code of Business Conduct and Ethics and Compliance Program, which is applicable to the Company and to all our directors, officers and employees, including our principal executive officer and principal financial officer, principal accounting officer or controller, or other persons performing similar functions.

 

A copy of the Company’s Code of Ethics may be obtained free of charge by making the request to the Company in writing or on the Company’s website at http://uniroyalglobal.com/company-profile/business-conduct-and-ethics-policy/.

 

Compensation Committee Interlocks and Insider Participation

 

Not applicable.

 

 55 

 

ITEM 11.EXECUTIVE COMPENSATION

 

Information required by this Item will be included in the sections of our 2020 Proxy Statement entitled “Director Compensation,” “Compensation Discussion and Analysis” and “Executive Compensation” and is incorporated herein by reference.

 

ITEM 12.SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

 

Information concerning the security ownership of certain beneficial owners and management will be included in the section of our 2020 Proxy Statement entitled “Security Ownership of Certain Beneficial Owners and Management” and is incorporated herein by reference.

 

ITEM 13.CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

 

Information required by this Item concerning certain relationships and related transactions and director independence will be included in the section of our 2020 Proxy Statement entitled “Certain Relationships and Related Transactions” and is incorporated herein by reference.

 

 

ITEM 14.PRINCIPAL ACCOUNTING FEES AND SERVICES

 

Information required by this Item concerning principal accounting fees and services will be included in the section of our 2020 Proxy Statement entitled “Fees Paid to Independent Registered Public Accounting Firm” and is incorporated herein by reference.

 

 56 

 

PART IV

 

ITEM 15.EXHIBITS, AND FINANCIAL STATEMENT SCHEDULES

 

Exhibits

 

The exhibits filed or furnished with this annual report are shown on the Exhibit Index that follows the signatures to this annual report, which index is incorporated herein by reference.

 

Financial Statement Schedules

 

None.

 

 57 

 

SIGNATURES

 

In accordance with Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

 

UNIROYAL GLOBAL ENGINEERED

PRODUCTS, INC.

     
     
Dated:  March 20, 2020 By:   /s/ Howard R. Curd
  Howard R. Curd
  Chief Executive Officer

 

     
     
Dated:  March 20, 2020 By:   /s/ Edmund C. King
  Edmund C. King
  Chief Financial Officer

 

 58 

 

KNOW ALL PERSONS BY THESE PRESENTS , that each of the undersigned hereby constitutes and appoints Edmund C. King as his true and lawful attorney-in-fact and agent, with full power of substitution and resubstitution, for him and on his behalf to sign, execute and file this annual report on Form 10-K and any or all amendments without limitation to this annual report, and to file the same, with all exhibits thereto and any and all documents required to be filed with respect therewith, with the Securities and Exchange Commission or any regulatory authority, granting unto such attorney-in-fact and agent full power and authority to do and perform each and every act and thing requisite and necessary to be done in connection therewith and about the premises in order to effectuate the same as fully to all intents and purposes as he might or could do if personally present, hereby ratifying and confirming all that such attorney-in-fact and agent, or his substitute or substitutes, may lawfully do or cause to be done.

 

In accordance with the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

 

Dated: March 20, 2020 /s/ Howard R. Curd
  Howard R. Curd, Chief Executive Officer, Co-Chairman
   
   
Dated: March 20, 2020 /s/ Edmund C. King
  Edmund C. King, Chief Financial Officer, Co-Chairman
   
   
Dated: March 20, 2020 /s/ John E. Scates
  John E. Scates, Director

 

 59 

 

EXHIBIT INDEX

 

Exhibit No.   Description
     
2.1   Agreement of Merger and Plan of Reorganization dated 2/25/02 by and among SmartGate Inc., SmartGate/RadioMetrix Acquisition Corp. and Radio Metrix Inc., Letter of Clarification, and Amendment dated as of April 24, 2003 (Incorporated by reference to Form 10-KSB filed on June 23, 2003.)
3.1   Amended and Restated Articles of Incorporation of Invisa, Inc. (Incorporated by reference to Form 8-K filed on July 16, 2015.)
3.2   Amended and Restated Articles of Incorporation of Uniroyal Global Engineered Products, Inc. (Incorporated by reference to Form 8-K filed on July 16, 2015)
3.3   Amended and Restated Bylaws of Invisa, Inc. (Incorporated by reference to Form 10-K filed on March 30, 2015.)
4.1   Certificate of Designations of Preferences and Rights of Series A Convertible Preferred Stock dated August 16, 2004 (Incorporated by reference to Form 10-QSB filed on August 23, 2004.)
4.2   Amended and Restated Certificate of Designations of Preferences and Rights of Series B of Convertible Preferred Stock of Invisa, Inc. dated January 11, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
4.3   Certificate of Designations of Preferences and Rights of Series C Convertible Stock dated December 22, 2008 (Incorporated by reference to Form 8-K filed on January 13, 2009.)
4.4   Second Amended and Restated Certificate of Designations and Preferences and Rights of Series A Convertible Preferred Stock dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
4.5   Second Amended and Restated Certificate of Designations and Preferences and Rights of Series B Convertible Preferred Stock dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
4.6   Amended and Restated Certificate of Designations and Preferences and Rights of Series C Convertible Preferred Stock dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
4.7   Third Amended and Restated Certificate of Designations of Preferences and Rights of Series A Convertible Preferred Stock (Incorporated by reference to w Form 8-K filed on May 5, 2014.)
4.8   Third Amended and Restated Certificate of Designations of Preferences and Rights of Series B Convertible Preferred Stock (Incorporated by reference to w Form 8-K filed on May 5, 2014.) 
4.9   Second Amended and Restated Certificate of Designations of Preferences and Rights of Series C Convertible Preferred Stock (Incorporated by reference to w Form 8-K filed on May 5, 2014.) 
4.10   Uniroyal Global Engineered Products, Inc. 2015 Stock Option Plan (Amended and Restated effective July 30, 2015) (Incorporated by reference to Form 10-Q filed on August 5, 2015)
4.11 *   Description of Registered Securities
10.1   SDR Metro Inc. letter extension agreement (Incorporated by reference to Form 10-KSB filed on April 14, 2004.)
10.2   SDR Metro Inc. confirmation letter agreement (Incorporated by reference to Form 10-KSB filed on April 14, 2004.)
10.3   Subscription Agreement for issuance of 22,000 shares of Series A Convertible Preferred Stock and Common Stock Warrants (Incorporated by reference to Form 10-QSB filed on August 23, 2004.)
10.4   Registration Rights Agreement (Incorporated by reference to Form 10-QSB filed on August 23, 2004.)
10.5   Opinion of counsel regarding legality of Common Stock (Incorporated by reference to Form S-8 filed on August 14, 2006.)
10.6   UCC Financing Statements (Incorporated by reference to Form 8-K/A filed on October 18, 2006.)
10.7   Schedule of Advances: Permitted Payments (Incorporated by reference to Form 8-K/A filed on October 18, 2006.)
10.8   Forbearance and Modification agreement dated July 27, 2007 (Incorporated by reference to Form 10-QSB filed on November 14, 2007.)
10.9   Senior Secured Promissory Note dated November 9, 2007 (Incorporated by reference to Form 10-QSB filed on November 14, 2007.)
10.10   Senior Secured Promissory Note dated February 28,2007 (Incorporated by reference to Form 8-K filed on March 12, 2007.)
10.11   General Security Agreement dated February 28, 2007 (Incorporated by reference to Form 8-K filed on March 12, 2007.)
10.12   Agreement dated February 28, 2007 with creditors agreeing to delivery of Senior Secured Promissory Note (Incorporated by reference to Form 8-K filed on March 12, 2007.)
10.13   Forbearance and Modification Agreement (Incorporated by reference to Form 10-QSB filed on November 14, 2007.)
10.14   Audit Committee Charter (Incorporated by reference to Form 10-KSB filed on April 14, 2008.)
10.15   Senior Secured Promissory Note date March 28, 2008 (Incorporated by reference to Form 10-KSB filed on April 14, 2008.)

 

 60 

 

10.16   Forbearance and Modification Agreement dated March 28, 2008 (Incorporated by reference to Form 10-KSB filed on April 14, 2008.)
10.17   Extension of Promissory Note dated April 11, 2008 (Incorporated by reference to Form 10-KSB filed on April 14, 2008.)
10.18   Senior Secured Promissory Note dated July 1, 2008 (Incorporated by reference to Form 8-K filed on July 30, 2008.)
10.19   Forbearance and Modification Agreement dated June 1, 2008 (Incorporated by reference to Form 8-K filed on July 30, 2008.)
10.20   Note and Share Exchange Agreement dated July 31, 2008 (Incorporated by reference to Form 8-K filed on January 13, 2009.)
10.21   Senior Secured Promissory Note dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.22   Senior Secured Promissory Note (Line of Credit) dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.23   Note Extension Agreement dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.24   Note Extension Agreement dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.25   Note Extension Agreement dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.26   Note Extension Agreement dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.27   Note Extension Agreement dated March 24, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.28   Terms of Exchange dated January 11, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.29   Letter Term Sheet and Consent Documents dated January 11, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.30   Share Exchange Agreement dated January 11, 2010 (Incorporated by reference to Form 10-K filed on March 31, 2010.)
10.31   Debt Conversion Agreement dated November 4, 2010 (Incorporated by reference to Form 10-Q filed on November 5, 2010.)
10.32   Maturity Extension Agreement dated November 4, 2010 (Incorporated by reference to Form 10-Q filed on November 5, 2010.)
10.33   Note Extension Agreement (note 4) dated December 31, 2011 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.34   Note Extension Agreement (note 5) dated December 31, 2011 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.35   Note Extension Agreement (note 6) dated December 31, 2011 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.36   Note Extension Agreement (note 7) dated December 31, 2011 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.37   Senior Secured Promissory Note (note 8) dated December 31, 2011 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.38   Senior Secured Line of Credit Promissory Note (note 9) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on March 30, 2012.)
10.39   Senior Secured Promissory Note (note 10) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.40   Note Extension Agreement (note 4) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.41   Note Extension Agreement (note 5) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.42   Note Extension Agreement (note 6) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.43   Note Extension Agreement (note 7) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.44   Note Extension Agreement (note 9) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.45   Note Extension Agreement (note 8) dated December 31, 2012 (Incorporated by reference to Form 10-K filed on February 21, 2013.)
10.46   Agreement dated March 7, 2014 to extend maturity date of Senior Secured Notes (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.47   Agreement to Extend Line of Credit dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.48   Note Extension Agreement (Note 4) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.49   Note Extension Agreement (Note 5) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)

 

 61 

 

10.50   Note Extension Agreement (Note 6) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.51   Note Extension Agreement (Note 7) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.52   Note Extension Agreement (Note 8) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.53   Note Extension Agreement (Note 10) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.54   Note Extension Agreement (Note 11) dated March 7, 2014 (Incorporated by reference to Form 8-K filed on March 10, 2014.)
10.55   Share Contribution Agreement, dated November 10, 2014, by and between Invisa, Inc. and Howard R. Curd (Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.56   Asset Contribution Agreement, dated November 10, 2014, between Invisa, Inc. and UEP Holdings, LLC (Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.57   Contribution Agreement, dated November 10, 2014, by and among Invisa, Inc., a Nevada corporation, UEP Holdings, LLC, a Delaware limited liability company, Howard R. Curd, Howard F. Curd, George Sanchez, Mark Kunz and Ted Torres (Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.58   Certificate of Formation of UEP Holdings, LLC, dated November 10, 2014 (Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.59   Limited Liability Company Agreement for UEP Holdings, LLC, dated November 10, 2014(Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.60   Amended and Restated Limited Liability Company Agreement, dated November 10, 2014, among UEP Holdings, LLC, Invisa, Inc., Howard R. Curd, Howard F. Curd, George Sanchez, Mark Kunz and Ted Torres (Incorporated by reference to Form 8-K filed on November 10, 2014.)
10.61   Guaranty in favor of Lloyds Bank Commercial Finance Limited (Incorporated by reference to Form 8-K filed on January 20, 2015.)
10.62   Agreement dated  December 31, 2014  with Centurian Investors, Inc. to consolidate loan (Incorporated by reference to Form 10-K filed on March 30,2015)
10.63   Senior Secured Promissory Note dated December 31,2014 (Incorporated by reference to Form 10-K filed on March 30,2015)
10.64   Amendment to General Security Agreement dated December 31,2014 (Incorporated by reference to Form 10-K filed on March 30,2015)
10.65   Amendment to Senior Secured Promissory Note dated October 1, 2017
10.66   Amendment to Senior Secured Promissory Note dated December 15, 2018
14.1   Uniroyal Global Engineered Products, Inc. Code of Business Conduct and Ethics (Incorporated by reference to Form 8-K filed July 1, 2015)
21.1 *   Subsidiaries of the Company
23.1 *   Consent of Frazier & Deeter, LLC
31.1 *   Chief Executive Officer Certification Pursuant to Securities Exchange Act Rules 13a-14 and 15d-14 as Adopted Pursuant to the Section 302 of the Sarbanes-Oxley Act of 2002.
31.2 *   Chief Financial Officer Certification Pursuant to Securities Exchange Act Rules 13a-14 and 15d-14 as Adopted Pursuant to the Section 302 of the Sarbanes-Oxley Act of 2002.
32.1 *   Certification Pursuant to 18 U.S.C. Section 1350.
32.2 *   Certification Pursuant to 18 U.S.C. Section 1350.

101.INS * XBRL Instance Document **
101.SCH * XBRL Taxonomy Extension Schema Document **
101.CAL * XBRL Taxonomy Extension Calculation Linkbase Document **
101.DEF * XBRL Taxonomy Extension Definition Linkbase Document **
101.LAB * XBRL Taxonomy Extension Label Linkbase Document **
101.PRE * XBRL Taxonomy Extension Presentation Linkbase Document **

 

 ______________ 

*   Filed herewith.
**   In accordance with Rule 406T of Regulation S-T, this information is deemed not “filed” for purposes of Section 18 of the Securities Exchange Act of 1934, as amended.

 

 

62