Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - Vuzix Corptm205290d1_ex32-2.htm
EX-32.1 - EXHIBIT 32.1 - Vuzix Corptm205290d1_ex32-1.htm
EX-31.2 - EXHIBIT 31.2 - Vuzix Corptm205290d1_ex31-2.htm
EX-31.1 - EXHIBIT 31.1 - Vuzix Corptm205290d1_ex31-1.htm
EX-23.1 - EXHIBIT 23.1 - Vuzix Corptm205290d1_ex23-1.htm
EX-4.1 - EXHIBIT 4.1 - Vuzix Corptm205290d1_ex4-1.htm

 

 

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

FORM 10-K

 

þ ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
  For the fiscal year ended December 31, 2019

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

Commission file number: 001-35955

 

Vuzix Corporation

( Exact name of registrant as specified in its charter )

 

Delaware
(State of incorporation)
25 Hendrix Road, Suite A
West Henrietta, New York
(Address of principal executive office)
 

04-3392453
(I.R.S. employer identification no.)

 

 

 

14586
(Zip code)

 

(585) 359-5900
(Registrant’s telephone number including area code)

  

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class:   Trading Symbol(s)   Name of each exchange on which registered
Common Stock, par value $0.001   VUZI   Nasdaq Capital Market

 

Securities registered pursuant to Section 12(g) of the Act:

None.

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ¨      No þ

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨      No þ

 

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ      No ¨

  

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). Yes þ      No ¨

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company,” and “emerging growth company in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ¨ Accelerated filer þ Non-accelerated filer ¨
 

Smaller reporting company þ

 

Emerging growth company ¨

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ¨

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No þ

 

The aggregate market value of the voting and non-voting common equity of the registrant held by non-affiliates as of June 30, 2019 was approximately $97,000,000 (based on the closing price of the common stock of $4.09 per share on that date, as reported on the NASDAQ Capital Market and, for purposes of this computation only, the assumption that all of the registrant’s directors and executive officers are affiliates and that beneficial holders of 10% or more of the outstanding common stock are affiliates).

 

As of March 16, 2020, there were 33,128,620 shares of the registrant’s common stock outstanding.

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Part III of this Form 10-K incorporates by reference portions of the registrant’s proxy statement for its 2020 annual meeting of stockholders.

 

 

 

 

 

TABLE OF CONTENTS

 

    Page
Item 1 Business 1
Item 1A Risk Factors 15
Item 1B Unresolved Staff Comments 33
Item 2 Properties 33
Item 3 Legal Proceedings 33
Item 4 Mine Safety Disclosures 34
Item 5 Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities 34
Item 6 Selected Financial Data 36
Item 7 Management’s Discussion and Analysis of Financial Condition and Results of Operations 38
Item 7A Quantitative and Qualitative Disclosures about Market Risk 51
Item 8 Financial Statements and Supplementary Data 51
Item 9 Changes in and Disagreements with Accountants on Accounting and Financial Disclosure 51
Item 9A Controls and Procedures 51
Item 9B Other Information 53
Item 10 Directors, Executive Officers and Corporate Governance 53
Item 11 Executive Compensation 53
Item 12 Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters 53
Item 13 Certain Relationships and Related Transactions, and Director Independence 53
Item 14 Principal Accounting Fees and Services 53
Item 15 Exhibits and Financial Statement Schedules 54

  

ii

 

 

FORWARD-LOOKING STATEMENTS

 

This annual report includes forward-looking statements within the meaning of the safe harbor provisions of the Private Securities Litigation Reform Act of 1995. These statements are based on our management’s beliefs and assumptions and on information currently available to our management. The forward-looking statements are contained principally under the headings “Risk Factors,” “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” and “Business.” Forward-looking statements contained in this Annual Report on Form 10-K include, but are not limited to, statements concerning: 

 

  · trends in our operating expenses, including personnel costs, research and development expense, sales and marketing expense, and general and administrative expense;

 

  · the effect of competitors and competition in our markets;

 

  · our wearable display products and their market acceptance and future potential;

 

  · our ability to develop, timely introduce and effectively manage the introduction of new products and services or improve our existing products and services;

 

  · expected technological advances by us or by third parties and our ability to leverage them;

 

  · our ability to attract and retain customers;

 

  · our ability to accurately forecast consumer demand and adequately manage inventory;

 

  · our ability to deliver an adequate supply of product to meet demand;

 

  · our ability to maintain and promote our brand and expand brand awareness;

 

  · our ability to detect, prevent, or fix defects in our products;

 

  · our reliance on third-party suppliers, contract manufacturers and logistics providers and our limited control over such parties;

 

  · trends in revenue, costs of revenue, and gross margin and our possible or assumed future results of operations;

 

  · our ability to attract and retain highly skilled employees;

 

  · the impact of foreign currency exchange rates;

 

  · the effect of future regulations;

 

  · the sufficiency of our existing cash and cash equivalent balances and cash flow from operations to meet our working capital and capital expenditure needs for at least the next 12 months; and

 

  · general market, political, economic and business conditions.

 

All statements in this annual report that are not historical facts are forward-looking statements. We may, in some cases, use terms such as “anticipates,” “believes,” “could,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “should,” “will,” “would” or similar expressions that convey uncertainty of future events or outcomes to identify forward-looking statements.

 

Forward-looking statements are made based on management’s beliefs, estimates and opinions on the date the statements are made and we undertake no obligation to update forward-looking statements if these beliefs, estimates and opinions or other circumstances should change, except as may be required by applicable law. Although we believe that the expectations reflected in the forward-looking statements are reasonable, we cannot guarantee future results, levels of activity, performance or achievements.

 

 

 

PART I

 

Item 1. Business

 

Company Overview

  

We are engaged in the design, manufacture, marketing and sale of augmented reality wearable display and computing devices, also referred to as head mounted displays (or HMDs, but also known as near-eye displays), in the form of Smart Glasses and Augmented Reality (AR) glasses. Our AR wearable display devices are worn like eyeglasses or attach to a head worn mount. These devices typically include cameras, sensors, and a computer that enable the user to view, record and interact with video and digital content, such as computer data, the Internet, enterprise data, social media or entertainment applications. Our wearable display products integrate micro-display technology with our advanced optics to produce compact high-resolution display engines, less than half an inch diagonally, which when viewed through our Smart Glasses and AR products create virtual images that appear comparable in size to that of a computer monitor or a large-screen television. This includes the representative forms such as augmented reality (AR), mixed reality (MR) and virtual reality (VR) and the areas interpolated among them. Extended reality (XR) is a term referring to all real-and-virtual combined environments. Our wearable display products cover the entire spectrum from "the complete real" to "the complete virtual" in the concept of reality–virtuality.

 

For AR glasses, historically, see-through HMDs displayed the real world using semi-transparent mirrors placed in front of the user’s eyes. VR users wore large goggles which sealed their view of the outside world. Both types of these HMDs were large and bulky and as a result, they had little mass-market appeal. We have developed thin optics, called waveguides, that are fully see-through and enable miniature display engines to be mounted in the temples of the HMD which allows the form factor of the Smart Glasses to be comparable to conventional eyeglasses. Our Smart Glasses and AR glasses are designed for all day use cases and are small enough to fit in a user’s pocket or purse.

  

We believe that our waveguide optics and display engines offer a number of significant advantages over other wearable display solutions, including higher contrast, greater power efficiency, less weight, more compact size, and high brightness images for use outdoors. We also believe that our waveguide optics give us a substantial advantage over other competitors’ optics, including other waveguides, because our solution allows us to produce optics that are fully transparent when off while also delivering the high brightness required for AR and enterprise Smart Glasses applications. 

 

We believe that key growth areas for us are the enterprise, consumer electronics, OEM, defense and security markets. We are addressing most of these markets by developing and selling our own finished products and building a growing eco-system of software and services with our VARs, developers and end customers. Another potential channel to these markets we are developing includes supplying mass production of waveguide optics and display engines to select third parties to use in their products. We believe that our waveguides and compact display engine technologies are a key differentiator for enabling next generation AR and Smart Glasses hardware for the enterprise and consumer segments because they will ultimately allow us to make HMDs nearly indistinguishable from regular eyeglasses.

 

We have developed our own intellectual property portfolio that includes patents, over 22 years of manufacturing know-how, software, proprietary processes, materials and equipment to create high performance waveguides, and near-eye display products. We believe our technology, intellectual property portfolio and position in the marketplace give us a leadership position in AR and Smart Glasses products and waveguide optics and display engine technology.

 

Our History

 

Historically, we have focused on three markets: the consumer markets for gaming, entertainment and mobile video; smart glasses products for enterprise; and rugged mobile displays for defense markets. We introduced our first HMD products over 22 years ago and we have offered numerous product models and versions with ever advancing features and capabilities that have served the three markets. In June 2012, we sold the assets that produced products and provided services to military organizations and defense organizations, but effective October 2018, we renegotiated the exclusivity agreement with the company we sold our defense division to and, as a result, we have started marketing and sale initiatives directly into the defense and homeland security markets.

 

1

 

 

Overall Strategy

 

Our goal is to establish and maintain a leadership position as a worldwide supplier of wearable displays and computers including AR glasses and Smart Glasses solutions. We offer our products across major markets, platforms and applications. We strive to be an innovator in designing wearable display devices that can enable enterprise productivity hands-free applications, mobile video viewing, general entertainment, social media, and most importantly, AR applications. We believe our revenue growth will be driven by the introduction of new AR Smart Glasses, accessories, and software applications.

 

To maintain and enhance our position as a leading provider of wearable display and computing products for AR and hands-free computing, we seek to:

 

  · develop products based on our unique technology for both specialized and large enterprise and consumer markets as well as defense and security;
  · improve brand recognition;
  · provide excellent products and service;
  · broaden and develop strategic relationships and partnerships;
  · sell our products or license our technology to third-party companies that would incorporate and sell them as a new product with their own brand name (OEM partners);
  · promote and enhance the development of third-party software that can take advantage of our products, including offering apps and software through our own “app store”;
  · extend our innovative and proprietary technology leadership;
  · enhance and protect our intellectual property portfolio;
  · establish multiple revenue sources; and
  · attract and retain highly qualified personnel.

  

Our strategy is also to create a leadership position as a worldwide supplier of waveguide optics and near-eye display technology solutions for applications in high growth segments of the enterprise and consumer electronics industry by capitalizing on our experience and expertise in wearable displays and computers and the move to AR Smart Glasses for delivering artificial intelligence (AI), entertainment, work, social media and other applications. We aim to provide waveguides, display engines and complementary optics to enable OEM customers to serve a variety of markets with new enhanced display electronic products. Some key elements of our OEM strategy to achieve these objectives include:

 

  · strengthening our technology leadership;
  · optimizing waveguide manufacturing efficiencies while protecting proprietary processes;
  · building and maintaining strong design and software capabilities for our products;
  · developing OEM and mass production partnerships in the AR Smart Glasses market; and
  · leveraging technology and marketing strategic relationships with third parties.

 

The Market

 

The wireless, IT, and entertainment industries have evolved considerably and continue to do so. The mobile phone has evolved into a ubiquitous, location-aware, smart mobile computing device. Mobile technology is redefining the way people interact with their world, both at work and play, and it has become an essential lifestyle management and entertainment tool personalized to users’ unique needs. We believe that interactive AR content, AI, Edge Computing, and speech-based cloud services will significantly change the way mobile products are used and how content is delivered to the user. We believe head-worn displays that are hands free can connect the digital world to the real world and have the ability to change the future of the computing industry. We believe AR based wearable display and Smart Glasses can enable new experiences that cannot be experienced in any other way.

 

2

 

 

Current mobile display technology is almost universally based on direct view screens. These displays are designed to be handheld and small to make portability easy. Our products provide hands-free virtual large screens that are interactive and fit into eyeglass form factors. VR-based head-worn displays block out surroundings for a fully immersive experience. AR-based displays are designed to be "see-through" or "see-around" and allow the user to still see and interact with their surroundings. They may contain one (monocular) or two (binocular) displays. We have leveraged our experience in developing wearable display computing products over the last 22 years and believe our AR experiences, relative to our competitors, allow us to more rapidly introduce wearable displays suitable for mobile, enterprise, defense and security workers, and general market consumers.

 

Our business for the last five years has focused on enterprise and industrial markets and high-end (prosumer) mobile consumer markets. We believe the demand for head-worn displays in these markets is being driven by such factors and expectations as:

 

  · an increasing number of “ready to go” hands-free enterprise, commercial and medical applications for which our products are well suited;
  · increasing demand for Internet, social media and cloud services’ access “anywhere, anytime”;
  · the growing use of AR/XR applications that will drive the need for head-worn display solutions to replace the need to hold up handheld devices to use the applications;
  · more users migrating a greater portion of their entertainment and information gathering time to mobile devices; and
  · we believe that our near-eye display technologies can significantly increase user satisfaction and allow for widespread AR adoption and applications.

 

Target Markets

 

We offer smart wearable display products that enable development and deployment of AR applications. AR Smart Glasses enable the wearer to see computer-generated information, graphics or images projected into the real-world environment or upon an object that the user is observing. Thus, whether in the warehouse, on the factory floor, or in the field, users wearing AR Smart Glasses may access a manual, tutorial, or image that is connected to the task at hand which will assist them in completing that task, while also viewing their current surroundings and nearby objects. Additional possible applications of AR-enabled Smart Glasses for consumer use include hands-free alerts, messaging, location and context aware information and social interaction.

 

Our target markets and applications by major sector are:

 

Enterprise

 

Our Smart Glasses products are currently focused on the enterprise market, including sectors such as industrial and medical. These Smart Glasses products run native Android applications within the glasses that, for example, allow them to stream video in real-time, which is very useful for many enterprise applications. We believe that a wide variety of commercial and industrial markets offer significant opportunities for our products due to increasing demand for instant data accessibility in mobile workplace environments. The benefit of hands-free mobile displays and computers over a handheld device is significant. Most mobile workers need the use of their hands while working and having access to the information required while being hands free can significantly improve productivity over having their hands occupied with handheld devices like tablets or a phone. Our Smart Glasses are being used for numerous applications including: remote service video support, wearable computer displays, viewing of wireless sensor data, quality assurance, hands-free access to work instructions such as assembly check lists and manuals, in-the-field maintenance, warehouse pick and place, real-time viewing of remote images, and training and education. We have built an ecosystem of Value-Added Resellers (VARs or VIPs – Vuzix Integration Partners), established relationships with a growing number of system integrators, and have garnered infrastructure support from leading mobile device management companies.

 

Security and First Responders

 

Our Smart Glasses, particularly the Vuzix Blade, have the potential to become disruptive and game changing products for security providers and first responders such as police and firefighters. There are significant business opportunities that take advantage of the Vuzix Blade’s unique form factor to assist law enforcement and security personnel in keeping people safe or identifying suspicious persons or those associated with crimes. The ability to deliver video feeds and real-time facial recognition and weapons detection alerts in a covert fashion to a Blade wearer literally gives security personnel and first responders eyes in the back of their heads while allowing them to stay remotely connected and informed.

  

3

 

 

Prosumer

 

We believe that the most significant driver of longer-term wearable display market adoption will be the growing consumer demand for mobile access to ever larger volumes of information and entertainment content in smaller and wearable packages.

  

We also believe that augmentation of the real world with cloud-based information is going to change the future of computing and will result in broad adoption of AR smart glasses. This capability will allow smart phone users to be able to keep their phones in their pocket and at the same time still receive location-aware content overlaid with their real-world view. For example, while a user walks down the street, they could get directions and a Yelp score for the restaurant they are looking at or they could chase Pokemon Go game characters as if they were actually in the real world; all within the view of their smart glasses while leaving the phone in their pocket.

 

As we manufacture our waveguides and display engines in higher volumes at reduced costs and capitalize on our waveguide manufacturing expertise, we believe that our products will be increasingly well-positioned to compete with other see-through optics and displays, particularly as demand expands for sophisticated mobile computing devices offering higher resolution and better image quality for AR/XR and Smart Glasses applications. We believe our waveguide and display engine technology addresses the critical performance parameters for next generation AR products, including higher brightness, sharper resolution, true see-through capabilities, compact size, lower power consumption and longer life.

 

Products

 

We produce and sell AR Smart Glasses for a variety of enterprise, commercial, and prosumer uses and applications. Our products are available with varying features and are currently offered as monocular display systems.

 

Our AR Smart Glasses are an intelligent wearable computing system specifically designed to enable computing and connecting AR cloud/internet of things information and AI to the real world. The embedded cameras in our Smart Glasses are used for recording and/or seeing the real world. Input and control of our smart glasses consist of using the wirelessly connected smartphone, speech recognition voice control, a series of built in sensors for head motion and in some cases gesture sensors. We are building an ecosystem of developers around these smart glasses and anticipate that most of the software being developed will be usable on future generations of our smart glasses. Cloud or internet-connected applications for our Smart Glasses are being created for manufacturing, medical, field maintenance and repair, training, gaming and social media uses.

 

Our current products include:

 

M300XL, M400 and M4000 Smart Glasses (M series)

 

The M300XL and M400 (the “M series”) products are our monocular smart glasses designed for enterprise, industrial, commercial and medical markets. The M300 was first introduced in 2017, followed in 2018 by the improved M300XL and by the M400 with its enhanced capabilities which begun commercial production in September 2019. These products include an Android-based wearable computer similar in performance to a modern smart phone (an Intel Atom processor for the M300XL and the Qualcomm XR1 platform for the M400), enhanced with a wearable monocular display and wireless connectivity capabilities. These Smart Glasses serve up the digital world “hands-free”, offering access to information, data collection and more. Monocular products, due to their single eye display, are best used for push notifications and “information snacking”. An integrated head tracking, camera, touchpad, buttons and speech recognition gives versatility to navigate and use these M-series Smart Glasses in almost any working environment. These products include pre-installed apps that can be used to record and playback still pictures and video, track timed events, manage a user’s calendar, link to a phone, scan barcodes and much more. These products can provide enhancements to existing workflows and open new opportunities in industrial, medical, retail, supply chain, remote help desk, and many more aspects of our customers’ businesses.

 

4

 

 

In January 2020, the Company announced at CES 2020 a prototype of our monocular M4000 Smart Glasses. The M4000, which also uses the Qualcomm XR1 platform, runs on the latest Android OS and offers all the performance and functionality of the M400, features Vuzix’ proprietary waveguide optics to provide a completely non-occluded, see-through, heads-up, display along with reduced sizing. The M4000 will enter mass production in the second half of 2020.

  

Blade Smart Glasses 

 

We introduced the Blade Smart Sunglasses as a monocular system at CES 2018. We believe the Vuzix Blade® is the natural evolution of AR glasses providing the user with a wide range of features and capabilities in a natural glasses form factor. The display imagery is projected visually out in front of the user like the heads up display in a car, current applications range from basic text messaging and answering the phone to overlaying mapping directions, menus, weather, events, stock quotes, video conferencing, sports updates, social feeds, biometrics and much more. The intuitive and feature packed Vuzix Blade OS allows the user to simply and intuitively navigate via simple swipes and taps, or leverage voice controls and external AI systems. This allows users to leave their phones in their pockets for most functions and adds the ability to connect the information being presented to the real world, including that from cloud-based speech AI platforms such as Amazon Alexa. We believe the Blade Smart Glasses is the first natural step to replacing the smart phone with a ubiquitous wearable device for all.

 

The Vuzix Blade with its fashionable form factor and all-day wear-ability fills the gap between wearer expectations and actual form factors. For the enterprise user, the Vuzix Blade pairs with the user’s smart phone or connect directly to a Wi-Fi network, allowing for custom, secure industrial applications.

 

Other AR Products

 

We are currently also developing a binocular AR Smart Glasses product with 3D, stereo cameras, and 3D camera vision capabilities that we expect to introduce sometime in 2021. Future AR Smart Glasses versions will include increased resolutions and fields of view, more powerful computers, MicroLED displays and our thin waveguide see-through optics. AR wearable displays provide the user a live, direct or indirect, view of a physical, real-world environment whose elements are “augmented” by computer generated sensory input such as sound, video, graphics or GPS data. Such systems also contain head tracking technology, which enables the user to look around the environment being viewed by moving his or her head which in turn sends that information back to the computer, which then adjusts the computer-generated AR image accordingly.

 

Applications for Smart Glasses

 

Dozens of standard applications that are optimized for use with the growing lineup of Vuzix AR Smart Glasses are included on the devices and available for download from the Vuzix App Store. These applications are similar to what is available to the customer with modern smart phones. These standard applications are designed to be simple to get started and easy to use, and we believe can immediately provide the fundamental benefits of Smart Glasses to novice and expert users alike.

 

Vuzix also resells a variety of other applications, including Vuzix Remote Assist (VRA), which provides remote telepresence capabilities, otherwise known as see-what-I-see video collaboration. VRA enables an operator, mechanic, field technician or consultant to communicate in a hands-free manner with a remote expert to drive “just in time” video support of a process or repair. VRA increases productivity and customer satisfaction by sharing information between field technicians and remote support experts. It enables Vuzix Smart Glasses customers to multiply their expert workforce, eliminate the high costs of travel, improve customer service levels and equipment operation and accelerate knowledge transfer and training. We are offering the VRA app on a monthly or one-year subscription basis. We are also developing “connector” applications to enable third party applications like Zoom, Skype for Business, WebEx and others, for use with our smart glasses. These applications in some cases will be free to the user and in others we will change annual fees.

 

5

 

 

App Store for Smart Glasses

 

We also have an App Store on our website where users can download and purchase Smart Glasses applications, including third-party apps. We continue to foster the development of an ecosystem of third-party developers to offer applications and trials for their smart glasses apps and many will be sold on an industry common revenue share model, with the publisher receiving approximately 70% of the subscriptions collected. Supported by Vuzix’ new App Store, developers can offer or sell their applications to all Vuzix Smart Glasses users, expanding into an ecosystem of AR applications for real world use today. The App store supports free, onetime fee, and paid subscription monetization models. The Vuzix third-party developer community is able leverage the open Android platform of the Vuzix M-Series and the Vuzix Blade to bring new and creative ideas to life.

  

Waveguide Optics and Design Reference Kits

 

We selectively offer waveguide optics and related coupling optics combined with our compact Cobra II display engine to form a see-through display module. We sell limited numbers of our waveguide optic design reference kits to select qualified potential OEMs/ODMs, which include a Cobra II projector, waveguide optics and associated electronics, to help these customers evaluate our technologies and to assist their efforts to build and test new products incorporating our proprietary solutions.

 

Our strategy for addressing the consumer mass market includes developing partnerships with both select consumer companies, including wireless communications carriers and select high volume production manufacturing companies.

 

Custom Solutions and Engineering Solutions

 

We have in the past provided fully integrated wearable display systems, including head mounted displays, human computer interface devices, near-eye display related engineering services and wearable computers to commercial, industrial and defense customers. As a result of the sale of our defense division in June 2012, we were precluded from pursuing general engineering services work with defense or security organizations. However, in October 2018 we signed an amendment to our agreement with the purchaser of our defense division that now allows us to sell our products to defense and security organizations, including business customers and governmental entity customers that primarily provide security and defense services. Such potential customers include police, fire fighters, EMTs, other first responders, and homeland and border security.

 

In February 2017, we entered into a development agreement with Toshiba to create a customized Window-based USB-C Type C AR Smart Glasses offering for Toshiba, which is a derivative product of the Vuzix M300 Smart Glasses. We delivered hundreds of engineering and development units and began volume manufacturing in 2018 for Toshiba to fulfill their initial orders under our 3-year supply agreement, which was previously announced by Vuzix in December 2017. With the recent purchase of Toshiba’s computer division by Sharp (Foxconn), further commercial orders have slowed and we have no short-term expectation of further orders.

 

In the first quarter of 2020 we opened a new outward facing section of our website dedicated to offering our OEM and engineering services around our waveguides and display technology. Waveguides require a display engine built for the purpose of the intended design. Vuzix is able to address most of these design specifications regardless of size, light coupling, power consumption, or resolution. There are many factors that need to be considered to get the right solution. This adaptability makes our engineering services capability highly desirous within the technology industry.

 

Defense and Security Products 

 

In early October 2018, we amended the 10-year non-compete restrictions with the buyer of our former defense division, TDG Acquisition LLC (DBA – Six15 Technologies (“Six15”). This amendment allows us to pursue opportunities related to the Company’s smart glasses and waveguide optics technologies into these expanded market opportunities related to first responders, US Department of Defense, Security Organizations and the Military. Vuzix is now permitted to perform contract work with and sell its waveguide optics and display engines to the largest third-party defense suppliers around the world that seek to incorporate Vuzix near-eye display or HMD technologies into the products and systems that they sell into Military Organizations. And while direct sales of products and services by us directly to Military Organizations are still precluded pursuant to the original non-compete and amendment, the new markets for Vuzix products enabled by the amendment to the non-compete, as well as an increased level of cooperation on certain non-competitive direct military sales, should be significant in both the United States and globally.

 

6

 

 

Product Development

 

We believe that the continued introduction of new products in our target markets is essential to our growth. Our products tend to have two to three-year life cycles. We have assembled a group of highly skilled engineers who work internally as well as with external consultants to continue our product development efforts. Our primary development efforts are focused on waveguide optics (and their manufacture), projection engines, displays, low-power electronic designs, firmware and wearable computing software, and the design and ergonomics of wearable displays. Our display product development efforts are focused towards continually enhancing the resolution, performance and manufacturability of our display products. During 2019, 2018 and 2017, we invested $8,900,837, $10,378,728, and $6,706,690, respectively, in research and development activities. We expect to increase our research and development expenditures in the future and as our revenues grow. We have also acquired and licensed technologies developed by third parties and we may continue to do so in the future.

  

Technology

 

We believe that it is important to make substantial investments in research and development to maintain our competitive advantage. The development and procurement of intellectual property rights relating to our technologies is a key aspect of our business strategy. We believe that it is now technologically feasible to improve upon the weight, ergonomics, optical performance, see-through capabilities, luminance, power efficiency, compactness, field-of-view and resolution of the current generation of virtual displays and display components. “Early technology adopters” and “prosumer” consumers have been the majority of the purchasers of our consumer wearable display products to date and similarly within the enterprise customer base for our Smart Glasses. However, our near-eye virtual display technology has been gradually improving in performance and we believe is starting to meet the high expectations of both the enterprise and the consumer mass markets with respect to screen resolution, computer power, image size and ergonomics. We expect to continue to improve our products through our ongoing research and development and advancements made by our third-party suppliers of key components.

 

We believe that the range of our proprietary technologies gives us a significant competitive advantage. Our technologies relate to advanced optics systems including passive and active see-through imaging waveguides, micro-projection display engines, high resolution scanning displays, and specialized software drivers and applications for wearable displays and computers. We also have a portfolio of trade secrets and expertise in nano-imprinting using quartz mold substrates, nano structure embossing, and engineering tool-sets for the design and manufacturing of diffractive waveguide optics. We are also performing research and development work on laser-based engines to drive scanned images into holograms, with the goal of such systems to offer next generation waveguides capable of 100 plus degree fields-of-view.

 

We believe that display engines are also important for commercializing wearable displays. We have developed a proprietary micro digital light processing (DLP) based engine called the Cobra II and are working on microLED engines designed specifically for our waveguide optics solutions. We are currently working with multiple partners on the micro LED arena and have demonstration systems that we have begun showing confidentially to select partners. These next generation waveguides and display engines have already allowed us to shrink the entire assembly to fit in the space available in a typical off-the-shelf pair of sports sunglasses. The Company’s Blade product will continue to evolve, and further reductions in size and power are on our near-term roadmap.

 

We entered into a technology license agreement with Nokia Corporation in August 2011 for their Exit Pupil Expanding (EPE) optics technology. This agreement was amended in October 2017 to allow us greater flexibility with sub-licensing and preferable royalty terms. Under these agreements, we perform on-going research and development on EPE optics and are expected to manufacture and bring to market components and products containing the licensed technology. In addition, we will provide Nokia with the ability to purchase products and components which incorporate the licensed technology. EPE technology is an important foundation of our diffraction-based waveguide optics technology.

 

In October 2017, we acquired certain IP and patent applications from the inventor/seller related to holographic optics and display engines for image and wave field projection through a diffusive media”. This technology is still in active development and we are making progress towards our first functional solution.

 

Major technologies that we employ in our products include:

 

Micro-display optics represent a significant cost of goods for both us and our competitors. This cost is a function of the physical size of the micro-display and the cost of the supporting optics. We have developed thin and lightweight optics that can be integrated with very small micro-displays that we can more closely match conventional eyewear frames in size and weight. These new optics and displays provide what we believe are significantly improved ergonomics compared to competing wearable display solutions. 

 

7

 

 

See-Through Waveguides:  We have developed a range of patents and patents pending around our see-through waveguides. We are developing passive, dynamic and diffractive optics-based waveguides that are the basis for some of our future slim wearable display AR and smart glasses products. We are striving to develop ultra-compact micro-display engines to magnify and focus the light from a display into a user’s eye. Our development goal with these waveguides is to create AR-based wearable displays that will appear to others as practically indistinguishable from today’s conventional sunglasses by most every measure, including comfort, size, weight and ergonomics.

 

Custom Display Engines: We have patents and patents pending on intellectual property (IP) around micro DLP display engines. Our Cobra II micro DLP engine is one of the smallest volume engines built around DLPs. We are also working on laser modulated and MicroLED engines designed specifically for our waveguide optics solutions. We are currently working with multiple partners on MicroLED engines and have demonstration systems that we have begun showing confidentially to select partners and potential OEM customers. We are also performing research and development work on laser-based engines to drive scanned images into holograms, with the goal of such systems to offer next generation waveguides capable of 100 plus degree fields-of-view.

  

Nanoimprinting: We continue to develop a portfolio of trade secrets and expertise in nanoimprinting for use in our waveguide optics. We believe these technologies are essential to the production of our approximately 1.2 mm thick see-through lenses which we believe are the cornerstone to making fashionable eyeglass-styled Smart Glasses. We have developed technology for waveguide design and production including: tool design and creation, custom designed software for grating structures and layout, lithography processes, high index low shrinkage polymers and other materials, mold treatments, automation equipment and test/QA processes and procedures, to name a few. 

 

Patents and other Intellectual Property

 

We have an intellectual property policy which has as its objectives: (i) the development of new intellectual property to further our intellectual property position in relation to personal display technology; and (ii) the maintenance and protection of our valuable trade secrets and know-how. We seek to achieve these objectives through the education and training of our engineering staff and the adoption of appropriate systems, policies and procedures for the creation, identification and protection of intellectual property.

 

Our general practice is to file patent applications for our technology in the United States, Europe, Japan, and in additional countries, including Canada and China for inventions which we believe have the greatest potential. We file and prosecute our patent applications in pursuit of the most extensive fields of protection possible including, where appropriate, the application of the relevant technology to the broader display industry.

 

We believe that our intellectual property portfolio, coupled with our key supplier relationships and accumulated experience in the near-eye display field, gives us an advantage over potential competitors. We also believe our copyrights, trademarks, and patents are critical to our success and we intend to maintain and protect these. We also rely on proprietary technology, trade secrets, and know-how, including manufacturing processes and procedures, which are not patented. To protect our rights in these areas, we require all employees and, where appropriate, contractors, consultants, advisors and collaborators, to enter into confidentiality, invention assignment and non-competition agreements.

 

Our technologies enable us to provide low-cost, small form factor, high-resolution wearable display products. To protect our technologies, we have developed a patent portfolio which currently consists of 71 issued U.S. and foreign patents and 79 pending U.S. and foreign patent applications. We are also currently preparing several invention disclosures for the purposes of submitting design and utility patent applications. Our U.S. and foreign patents expire on various dates to July 6, 2041. In addition, in connection with the sale of our defense division in 2012, we received a worldwide, royalty-free, assignable grant-back license to all the patents and other intellectual property sold for use in the manufacture and sale of products in the consumer markets.

 

In addition to our various patents, we have 6 registered U.S. trademarks and 52 trademark registrations worldwide.

 

8

 

 

Competitors

 

The near-eye or personal display and mobile device industry in which we operate is highly competitive and evolving rapidly. We compete against both direct view display technology in smart phones and tablets and wearable display technology. We believe that the principal competitive factors in the personal display industry include image size, image quality, image resolution, power efficiency, manufacturing cost, weight and dimension, feature implementation, AR capabilities, ergonomics, style, hands free capabilities and, finally, the interactive capabilities of the overall display system.

 

Aside from direct view displays, we also have competitors who produce near-eye personal displays or wearable displays. For the past decade, most of these products were mainly low-resolution, bulky in size, ergonomically deficient, costly, and heavy in their power requirements.

  

Competition - Binocular Wearable Display Products

 

Vuzix AR Smart Glasses competitors include binocular wearable displays and virtual reality systems, using micro-displays. Examples of such companies include or have included Carl Zeiss, Seiko Epson (Epson), Sony Corporation, Avegant, Osterhout Design Group (ODG), Oculus/Facebook, HTC, Razer and many others. Many of these firms have discontinued their efforts while others have introduced VR viewers themselves. We believe these competitive products have received limited customer acceptance due to their being bulky and with non-user-friendly designs. Other companies that have stated their intention to enter this market when their product development is complete with either finished products or components with optics and display engines are Lumus, WaveOptics, Digilence, and Microvision Corporation.

 

As an alternative to micro-display-based head worn display systems, most manufacturers have moved to using larger display panels that are typically found in smart phones. A Facebook unit, Oculus, has been shipping its large field-of-view VR goggle HMD since 2016. HTC that same year introduced its higher-end VR system called the HTC Vive. Sony, after dropping their HMZ video viewer product, released in October 2016 its PlayStation VR goggle system specifically for its PlayStation 4 game console. Enhanced versions of these VR goggles along with systems possessing improved performance and reduced pricing hav been introduced by HTC, and Oculus has offered new models which do not have to be connected with a PC to operate. Facebook in 2019 introduced its first all-in-one gaming headset for VR. It combines a larger OLED high-resolution display and VR microprocessor that requires no wires or a PC to operate. The product has recently been on back-order due to popular demand.

 

Additionally, numerous manufacturers offer head worn goggle attachments for smart phones that are designed to be used for VR applications. These devices contain simple optics that allow the user to insert their smart phone into the device and view their phone screen very close to their eyes and can offer an inexpensive way for owners of compatible smart phones to experience virtual reality. These products are generally priced under $100 and include a wireless controller to allow the wearer to navigate and play VR games. We believe all these units are very bulky relative to the wearer’s head, offer limited, but improving resolution to each eye, and often have less than clear optical performance across their viewing area. While acceptable for VR games and 360 videos, these are less than satisfactory as a big-screen video viewer or computer display due to ‘screen-door’ and other optical distortions. We expect that, as the market grows and matures and as the technology becomes more refined, more companies may compete with us.

  

Competition – AR Glasses 

 

In the AR markets, there are few competitors with most of this market currently aimed at the high-end and research markets. Companies that have offered or are offering products or intending to do so in this area include Microsoft, Meta, Sony, Epson, Atheer, DAQRI, Magic Leap, ODG, Nreal and CastAR. Today many of these products are fairly bulky and tethered to an external controller. Many are being sold as AR Smart Glasses and are currently targeted at enterprise and academic researchers. The most complete and functional systems today are the Microsoft Hololens and the Magic Leap One, both of which cost $2,295 - $3,500 per unit. Microsoft unveiled their second generation of Hololens in late February 2019 and Magic Leap has not yet provided a next generation of their original offering.

 

Magic Leap, a well-funded startup, released its Magic Leap One creator edition system for AR applications in late 2018 at a price of $2,295. Further, industry bloggers have speculated that companies such as Apple, Google, and Oculus/Facebook may offer or support AR wearable display products in the future, but to date, no specific product launch details have been officially announced.

 

9

 

 

Competition - Monocular Smart Glasses and Wearable Display Products

 

Although several companies produce monocular wearable displays, we believe that sales of their products to date have been limited. To date, the market opportunity for monocular products other than night vision products has been limited primarily to trial tests and smaller rollouts in enterprise markets rather than broad commercial volume purchases. Competitors in these markets include or have included: Liteye Systems, Inc., Lumus, Shimadzu Corporation, Sony, Kopin, Zebra Technologies (inclusive of the business unit formerly part of Motorola), Creative Display Systems, Brother, Google, Garmin, BAE Systems, Six-15 Technologies, LLC (the purchaser of our defense division), Lenovo, Optinvent, RealWear, Focals by North, and Rockwell Collins.

 

Google’s wearable display device, named Google Glass, was a headset product with similar form and function to our M100 Smart Glasses. In 2015, Google stopped selling its first version of Glass and then launched a refreshed version called Glass Enterprise. Google introduced the Google Glass 2 for Enterprise in 2019 with sales originally restricted to software and system integrators.

 

Several Japanese electronics companies including Hitachi, Murata, Sony, Westunitis, and Olympus have or had announced monocular smart glasses systems for industry and many have exited the business over the last two years. There are also several Chinese based companies that have been showing monocular smart glasses products, including Lenovo but their sales activities thus far have been somewhat limited and focused on Asia. We expect that we will encounter competition in the future from major consumer electronics companies and suppliers of imaging and information products for defense applications.

 

There is competition in all types of products we manufacture, from both large and small companies. The principal points of competition for these products include, among other factors: price, product performance, the availability of supporting applications, and the experience and brand name of the particular company and history of its dealings in such products. We believe that our monocular products match or exceed the display products currently offered by our competitors.

 

Competition – Waveguides and Display Engines

 

There are a limited number of manufacturers of waveguide optics, all targeted at OEM producers of AR and smart glasses. Competitors to our waveguide products include Lumus, WaveOptics, Digilens, Optivent and several others. New waveguide manufacturers from China have begun demonstrating their solutions at recent trade shows.

 

Sales and Marketing

 

Sales

 

Our strategy is to sell our products and components both directly and through distributors and value-added resellers (VARs – also referred to Vuzix Integration Partners or VIPs), and on a select basis to OEMs. As a result, we have distinct strategies for the sales of our products.

 

In the Smart Glasses and AR markets, we are currently focused on the enterprise space and as such are building strategic marketing relationships with software firms to address and support enterprise customers. We are, in parallel, developing a VAR network with leading companies in various vertical markets from warehousing to field service to medical. As these VARs finish their value-added software and services offerings, we expect them to roll-out their finished solutions to their respective customer bases. Some VARs, after qualification, are being designated as a Vuzix Integration Partner or VIP. Such VIP partners gain early access to our new Smart Glasses hardware, receive first access to the initial commercial shipments, and get access to co-marketing support, discounts and more. We are also supporting select larger key accounts with our in-house direct sales team. For our Smart Glasses, we are also developing an ecosystem with application developers from around the world. We have introduced our own hosted application store where our Smart Glasses customers can download and purchase applications and software developer kits.

 

10

 

 

We currently sell our products internationally through resellers, direct to commercial customers, and via online stores and various Vuzix operated web stores in Europe and Japan. Our international focus is currently on Japan and the European Union (the “EU”). In Japan, we have a branch sales and service office and a small warehouse in Tokyo. We employ two full-time staff in Japan. We have a wholly owned subsidiary, Vuzix (Europe) Limited, through which we conduct our business in the EU and Middle Eastern markets. We maintain a small European sales office in Oxford, England that is staffed by full time sales consultants. For warehousing, we have contracted with a third-party fulfillment center based in the UK to service our customers in the EU.

 

For customer support for the Americas and EMEA, we have contracted with a third-party end user technical support firm that provides 16 hours of customer and technical support daily.

 

We intend to primarily provide our waveguide and miniature display engine modules and optics components to select OEMs to incorporate into their branded products and sell through their own well-established distribution channels. An OEM/ODM design cycle typically requires between 6 and 24 months, depending on the uniqueness of the market, and the complexity of the end product. Because our waveguides and display engines are the main functional component that defines the imaging as well as look and feel of many of our potential OEM customers' end products, we intend to work closely with these customers to provide technical assistance throughout their product evaluation and any eventual integration process.

 

We believe that the technical nature of our potential OEM products such as waveguides and display projectors with micro-displays, demands close relationships with such customers. Our sales and marketing staff, assisted by our technical staff and senior management, visit prospective and existing customers worldwide on a regular basis. We believe these contacts are vital to the development of a close, long-term working relationship with our OEM customers, and in obtaining regular forecasts, market updates and information regarding technical and market trends. We also participate in industry specific trade shows and conferences.

 

Marketing

 

Our marketing and sales group in conjunction with external firms is responsible for product management, planning, advertising, marketing communications, and public relations. We have both internal and external public relations efforts in the U.S. and UK. We also employ marketing firms to help prepare brochures, packaging, tradeshow messaging and advertising campaigns, focused on either the enterprise or consumer end markets. Most of our products are currently sold under the Vuzix brand name. Toshiba’s AR100, based on our M300 Smart Glasses is our first co-branded product. We seek to have Vuzix become known as one of the premier suppliers of wearable display products for enterprise applications and AR smart glasses. We currently undertake specific marketing activities as needed, including, but not limited to:

  

  · product reviews, case studies and promotions in trade publications;

 

  · case studies on successful enterprise uses of Smart Glasses and AR;

 

  · product and technology views for our website and social media;

 

  · internet and search engine advertising and targeted emails;

  

  · public relations; and

 

  · trade shows and event sponsorships. 

 

11

 

 

Prosumer Marketing

 

We engage in select marketing efforts that are intended to drive customers to our products and to grow awareness of our AR Smart Glasses and wearable displays in general. Public relations and product videos are an important aspect of our marketing and we intend to continue to distribute samples of our products to key industry participants. We intend to focus our marketing efforts for the next 12 months on:

 

  · distinguishing our AR Smart Glasses products from current competitors and by offering products with superior performance and advanced optics relative to those of our competitors;

 

  · working with third-party software developers to support the unique capabilities of our new products; and

 

  · creating brand awareness with the press and general public of Vuzix and our products, with particular emphasis on our new forthcoming waveguide-based products.

 

Our Blade Smart Glasses products are primarily sold directly to prosumers and at times through select specialty retailers and online retailers such as Amazon. Our monocular Smart Glasses are sold through valued-added resellers, direct to end customers, through our webstore and through a limited number of third party online stores. Our website, www.vuzix.com, is an important part of our direct sales efforts.

  

Engineering Services and OEM Products

 

We primarily respond to sales inquiries for our engineering services programs and OEM component requests directly and usually in response to inbound inquiries. We do not offer “works for hire” services at Vuzix but rather offer our services to opportunities that could result in advancing our technology or end up in a long-term supply or OEM relationship. We believe we have established a solid reputation for quality, performance, and innovation for wearable near-eye display systems that will be attractive to many types of commercial users that want to leverage our services and products within their businesses. Our design and engineering staff are actively involved with customers during all phases of prototype design through production by providing engineering data, up-to-date product application notes, regular follow-up and technical assistance.

 

We continue to receive inbound requests for engagement related to our proprietary waveguide optics and miniature display engines from some of the world’s largest consumer and mobile electronics firms. Our business strategy is to commercialize our waveguide and display engine technologies and products to permit select ODMs and OEMs to integrate and embed our technologies and products in a way that best matches their unique capabilities and timeline for bringing their products to market. We now formally offer these solutions actively on our website.

 

Manufacturing

 

We purchase product components from our suppliers, engage third-party contract manufacturing firms to perform electronic circuit board and cable assemblies, and now do the final assembly of our products primarily in our Rochester, New York based facility. From 2016 to the summer of 2019, we used primarily contract manufacturers in China to assemble our products. We are experienced in the successful production of our products in moderate volumes. Our current facilities are capable of tens of thousands of finished products in total annually, and we believe producing out of these facilities at these levels is more economical and easier to manage than through third parties. We also manufacture all our waveguide optics in our cleanroom environments at our Rochester, New York facility. We evaluate contract manufacturers and component suppliers on an ongoing basis, including whether or not to utilize new or alternative contract manufacturers or component suppliers. However, we also expect to manufacture all our waveguide optics only at our Rochester, New York facility.

 

We currently purchase almost all of the micro-displays used in our products from Sony Corporation, Texas Instruments and Kopin. Our relationship with these micro-display suppliers is generally on a purchase order basis and none have a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis, nor do we have any contractual obligation to purchase micro-displays from them. We have operated this way for over a decade with these suppliers. Our Cobra II display engine is based on our proprietary design and is exclusively manufactured for us by a firm in Asia and it incorporates a DLP engine from Texas Instruments. We generally procure our other non-micro-display components and products from our vendors on a purchase order basis without any long-term commitments. Many of the raw materials used in our components are standard to the consumer electronics and computer industry. We provide forecasts that allow our contract manufacturers to stock component parts and other materials and plan capacity. Our contract manufacturers procure raw materials in volumes consistent with our forecasts, manufacture and/or assemble the products and perform tests according to our specifications. In some cases, we procure specific components and either sell them or consign them to our contract manufacturers. Products are either shipped to our customers or shipped to our Rochester, New York headquarters to be inventoried as finished goods. We currently use several manufacturing sources in Asia where we have located some of our tooling.

 

12

 

 

While we do not manufacture our components, other than waveguides, we own the tooling that is used to make our custom components. Some of our accessory products are sourced from third parties as finished goods. We typically have them print our Vuzix brand name on these products if they are co-branded. Such third-party products represented less than 5% of our sales in last three fiscal years.

  

Our manufacturing is not currently subject to seasonal variations, but in the future, depending upon our customers' product mix, we may be affected by seasonal fluctuations which could affect working capital demands.

 

We work with a third-party fulfillment partner in the EU that delivers our products to customers in Europe, the Middle East, and Africa, which allows us to reduce order fulfillment time, reduce shipping costs, and improve inventory flexibility.

 

Backlog 

 

There is a relatively short cycle between order and shipment of our sales. Most purchase orders we receive are subject to rescheduling or cancellation by the customer with no or limited penalties. In regard to sales of custom products and waveguides to our OEM customers, we believe that the backlog metric is of limited utility in predicting future sales because all these OEM customers operate on a ship-to-order basis. Therefore, we believe at this time that backlog information is not material to the understanding of our business.

 

13

 

 

Employees

  

As of March 16, 2020, we had 88 full-time employees in North America, of which 43 are in research and development and engineering services support. In Japan we have 2 full-time employees to manage our Asian sales activities. In England we have 2 full-time contractors to manage our European sales and marketing activities.

 

Information about Geographic Revenue

 

Information about geographic revenue is described in Note 18, “Geographic and Other Financial Information” in the notes to our consolidated financial statements. 

 

History - Corporate

 

We were incorporated in Delaware in 1997 as VR Acquisition Corp. In 1997, we acquired substantially all of the assets of Forte Technologies, Inc. (Forte), which was engaged in the manufacture and sale of Virtual Reality headsets and the development of related technologies. Forte was originally owned and controlled by Kopin Corporation, our main current micro-display supplier. Most of the technologies developed by Forte are now owned and used by us.

 

Reference in this report to “Vuzix”, the “Company”, “we,” “us,” “our” and similar words refer to Vuzix Corporation and its wholly-owned subsidiary.

 

14

 

 

Item 1A Risk Factors

 

An investment in our securities involves a high degree of risk. An investor should carefully consider the risks described below, together with all of the other information included in this annual report, before making an investment decision. Our business, financial condition or results of operations could suffer as a result of these risks. In that case, the market value of our securities could decline, and an investor may lose all or part of his or her investment.

 

Risks Related to Our Business

 

We have incurred net losses since our inception and may continue to incur losses.

 

We reported a net loss of $26,476,370 for the year ended December 31, 2019, a net loss of $21,875,713 for the year ended December 31, 2018, and a net loss of $19,633,502 for the year ended December 31, 2017. We have an accumulated deficit of $144,742,811 as of December 31, 2019.

 

We may not achieve or maintain profitability in the future. We will need to increase sales in order to achieve and maintain profitability. In addition, we expect that our expenses relating to product development and research, sales and marketing, as well as our general and administrative costs, may increase as our business grows. If we do not soon achieve and maintain profitability, our financial condition will ultimately be materially and adversely affected and we would eventually be required to raise additional capital. We may not be able to raise any necessary capital on commercially reasonable terms or at all. If we fail to achieve or maintain profitability on a quarterly or annual basis within the timeframe expected by investors, the market price of our common stock may decline.

 

If we are unable to achieve profitability over the next twelve months or raise new capital, we may not be able to continue our current operations.

 

Our ability to continue current operations and to execute on our business plan is dependent upon on our ability to generate sufficient cash flows from operations or raise additional capital to meet our obligations. If adequate funds are not available to us on a timely basis, or at all, we may have to reduce current operations and delay capital expenditures in order to conserve cash.

 

Based on our current operating plan, we anticipate that, given our current working capital levels, and our plans to raise additional capital as needed, we will be able to meet our financial obligations as they become due over the next twelve months. We currently have no additional committed external sources of funds and additional financing may not be available when we need it or may not be available on terms that are favorable to us. In addition, we may seek additional capital due to favorable market conditions or strategic considerations even if we believe we have sufficient funds for our current or future operating plans.

 

If additional financing is not available when required or is not available on acceptable terms, we may need to delay, modify or abandon our current operations and we may be unable to take advantage of business opportunities or respond to competitive pressures which would likely have a material adverse effect on our product offerings, revenue, results of operations and financial condition.

 

If we fail to manage our operating expenses effectively, our financial performance may suffer.

 

Our success will depend in part upon our ability to manage our operating expenses, including but not limited to our cash management, effectively. We incurred significant operating losses in 2019, 2018 and 2017 and we have an accumulated deficit. Although we plan to seek to operate efficiently and to manage our costs effectively, including reductions in-force, we may not realize the cost savings expected from these actions. Aggregate charges for employee terminations and the timing to recognize these charges and other costs associated with any restructuring, including the estimates of related cash expenditures made in connection with any such restructuring, may exceed estimated amounts and may not lead to improvements in results of operations at expected levels and in the expected timeframe. If we are unable to operate efficiently and manage our costs, we may continue to incur significant losses in the future and may not be able to maintain or achieve profitability.

 

In the future, in response to unfavorable market conditions or customer demand, we may again need to strategically realign our resources, adjust our product line and/or enact price reductions in order to stimulate demand, and implement additional restructurings and workforce reductions. Any such actions may result in the recording of charges including inventory-related write-offs, or other restructuring costs. Additionally, our estimates with respect to the useful life or ultimate recoverability of our assets, including purchased intangible assets and tooling, could also change and result in impairment charges. If we are unable to operate efficiently and manage our costs, we may continue to incur significant losses in the future and may not be able to achieve or maintain profitability.

 

We operate in a highly competitive market and the size, resources and brand name of some of our competitors may allow them to compete more effectively than we can, which could result in a loss of our market share and a decrease in our revenue and profitability.

 

The market for head-worn display devices, including AR and Smart Glasses, is highly competitive. Further, we expect competition to intensify in the future as existing competitors introduce new and more competitive offerings alongside their existing products, and as new market entrants introduce new products into our markets. We compete against established, well-known diversified consumer electronics manufacturers such as Samsung Electronics Co., Sony Corporation, LG Electronics (LGE), HTC, Lenovo, and large software and other products companies such as Alphabet Inc. (Google), Microsoft Corporation, Facebook and Snap. Many of our current competitors have substantial market share, diversified product lines, well-established supply and distribution systems, strong worldwide brand recognition and greater financial, marketing, research and development and other resources than we do. In addition, many of our existing and potential competitors enjoy substantial competitive advantages, such as:

 

15

 

 

  · longer operating histories;

 

  · the capacity to leverage their sales efforts and marketing expenditures across a broader portfolio of products;

 

  · broader distribution and established relationships with channel partners;

 

  · access to larger established customer bases and known branding;

 

  · greater resources to fund research and development and to make acquisitions;

 

  · larger intellectual property portfolios; and

 

  · the ability to bundle competitive offerings with other products and services.

 

Moreover, smartphones, tablets, and new wearable devices with ever growing larger video display screens and computing power have significantly improved the mobile personal computing experience. In the future, the manufacturers of these devices, such as Apple Inc., Samsung, LGE, Lenovo, Fitbit, Google, Snap, Garmin, Facebook, Microsoft and others may design or develop products similar to ours. In addition to competition or potential competition from large, established companies, new companies may emerge and offer competitive products. Increased competition may result in pricing pressures and reduced profit margins and may impede our ability to increase the sales of our products, any of which could substantially harm our business and results of operations.

 

Our lack of long-term purchase orders and commitments from our customers may lead to a rapid decline in our sales.

 

All of our customers issue purchase orders solely at their own discretion, often shortly before the requested date of shipment. Our customers are generally able to cancel orders (without penalty) or delay the delivery of products on relatively short notice. In addition, our current customers may decide not to purchase products from us for any reason. If those customers do not continue to purchase our products, our sales volume could decline rapidly with little or no warning.

  

We cannot currently rely on long-term purchase orders or commitments to protect us from the negative financial effects of a decline in demand for our products. We typically plan our production and inventory levels based on internal forecasts of customer demand, which are highly unpredictable and can fluctuate substantially. Our OEM customers are required to give us rolling forecasts and issue non-cancellable purchase orders but they have options to reschedule or pay cancellation fees. The uncertainty of product orders makes it difficult for us to forecast our sales and allocate our resources in a manner consistent with our actual sales. Moreover, our expense levels and the amounts we invest in capital equipment and new product development costs are based in part on our expectations of future sales and, if our expectations regarding future sales are inaccurate, we may be unable to reduce costs in a timely manner to adjust for sales shortfalls. As a result of our lack of long-term purchase orders and purchase commitments, we may experience a rapid decline in our sales.

 

As a result of these and other factors, investors should not rely on our revenues and our operating results for any one quarter or year as an indication of our future revenues or operating results. If our quarterly revenues or results of operations fall below expectations of investors or public market analysts, the price of our common stock could fall substantially.

 

If we do not effectively maintain and further develop our sales channels for our products, including developing and supporting our retail sales channel, value added resellers (VARs) and distributors, our business could be harmed.

 

We depend upon effective sales channels to assist us in reaching the customers who are the ultimate purchasers of our Smart Glass and AR products. We primarily sell our products either from our in-house sales team directly to enterprise and end users or through our website and VARs.

 

Our distributors, third-party online resellers and VARs generally offer products from several different manufacturers. Accordingly, we are at risk that these distributors, resellers and VARs may give higher priority to selling other companies’ products. If we were to lose the services of a distributor, online reseller or VAR, we might need to find another in that area, and there can be no assurance of our ability to do so in a timely manner or on favorable terms. Further, our resellers and distributors can at times build inventories in anticipation of future sales, and if such sales do not occur as rapidly as they anticipate, our resellers and distributors will decrease the size of their future product orders. We are also subject to the risks of our distributors, resellers and VARs encountering financial difficulties, which could impede their effectiveness and also expose us to financial risk if they are unable to pay for the products they purchase from us. Any reduction in sales by our current distributors or VARs, loss of key distributors and VARs or decrease in revenue from our distributors and VARs could adversely affect our revenue, operating results and financial condition.

  

16

 

 

Our future growth and profitability may be adversely affected if our marketing initiatives are not effective in generating sufficient levels of brand awareness.

 

Our future growth and profitability from our enterprise and prosumer products will depend in large part upon the effectiveness and efficiency of our marketing efforts, including our ability to:

 

  · create awareness of our brand and products;

 

  · convert consumer awareness into actual product purchases;

 

  · effectively manage marketing costs (including creative and media) in order to maintain acceptable operating margins and return on marketing investment; and

 

  · successfully offer to sell our products or license our technology to third-party companies for sale under their own brand name as OEM partners.

 

Our planned marketing expenditures may not result in increased total sales or generate sufficient levels of product and brand name awareness. We may not be able to manage our marketing expenditures on a cost-effective basis.

 

Our products require ongoing research and development and we may experience technical problems or delays, which could lead our business to fail.

 

Our research and development efforts remain subject to all of the risks associated with the development of new products based on emerging and innovative technologies, including, for example, unexpected technical problems or the possible insufficiency of funds for completing development of these products. If we experience technical problems or delays, further improvements in our products and the introduction of future products could be adversely impacted, and we could incur significant additional expenses and our business may fail.

 

We depend on advances in technology by other companies and if those advances do not materialize, some of our anticipated new products could be delayed or cancelled.

 

We rely on and will continue to rely on technologies (including micro-displays, mobile computing electronics and operating systems) that are developed and produced by other companies. The commercial success of certain of our planned future products will depend in part on advances in these and other technologies by other companies. We may, from time to time, contract with and support companies developing key technologies in order to accelerate the development of them for our specific uses. Such activities might not result in useful technologies or components for us. We are attempting to mitigate this risk by exploring ways to develop our own micro-display technologies using LED, MicroLED and laser scanning displays, but there can be no assurance that we will be successful in doing so.

 

If we fail to keep pace with changing technologies or are unable to anticipate customer preferences, our business and results of operations may be materially adversely affected.

 

Rapidly changing customer requirements, evolving technologies and industry standards characterize the consumer electronics, IT, mobile devices, smart phone, wearables and display industries. To achieve our goals, we need to enhance our existing products and develop and market new products that keep pace with continuing changes in industry standards, requirements and customer preferences.

 

Our success depends on our ability to originate new products and to identify product trends as well as to anticipate and react to changing customer demands in a timely manner. If we are unable to introduce new products or novel technologies in a timely manner or our new products or technologies are not accepted by customers, our competitors may introduce more attractive products, which could hurt our competitive position. Our new products might not receive customer acceptance if customer preferences shift to other products, and our future success depends in part on our ability to anticipate and respond to these changes. Failure to anticipate and respond in a timely manner to changing customer preferences could lead to, among other things, lower revenue and excess inventory levels.

 

17

 

 

If micro-display-based personal or near-eye displays do not gain greater acceptance in the market for mobile displays, our business strategy may fail.

 

The mobile display market is dominated by displays larger than one-inch, most of which are based on direct view liquid crystal display, or LCD and organic light emitting display, or OLED technology. A number of companies have made and continue to make substantial investments in, and are conducting research to improve characteristics of, handheld direct view LCDs and OLED displays. Many of the leading manufacturers of these larger direct view LCDs, including LG Electronics, Royal Philips Electronics, Samsung Electronics Co., Ltd., Sony Corporation, HiMax, Omnivision, Citizen, and Sharp Corporation, are large, established companies with global marketing capabilities, widespread brand recognition and extensive financial resources. Advances in direct view LCD and OLED technology or other technologies may overcome their current market limitations and permit them to remain or become more attractive technologies for personal viewing applications, which could limit the potential market for our near-eye display and computing technology and cause our business strategy to fail. 

  

It is difficult to assess or predict with any certainty the potential size, timing and viability of market opportunities for our micro-display-based AR Smart Glasses products or their level of market acceptance. Market acceptance of AR and Smart Glasses technology will depend, in part, upon end-user acceptance of near-to-eye displays and upon micro-display technology providing benefits comparable to or greater than those provided by alternative direct view display technology at a competitive price. Smart Glasses and AR products work best when used close to the eye, which may not be acceptable to consumers. Such acceptance may depend on the relative complexity, reliability, usefulness and cost-effectiveness of our near-eye display products compared to other display products available in the market or that may be developed by our competitors. In addition, our products are not designed for a shared experience amongst multiple viewers at the same time. Potential customers may be reluctant to adopt our Smart Glasses and AR products because of concerns surrounding perceived risks relating to use and the fact that it is a new technology. If end-users fail to accept near-to-eye displays in the numbers we anticipate or as soon as we anticipate, the sales of our Smart Glasses and AR products and our results of operations would be adversely affected and our business strategy may fail.

 

There are a number of competing providers of micro-display-based personal display technology, including smart glasses, and we may fail to capture a substantial portion of the personal wearable display market.

 

In addition to competing with direct view displays, we also compete with micro-display-based personal display technologies that have been developed by other companies. Our primary personal display competitors have or have included Carl Zeiss, Inc., Sony, Epson, Alphabet (Google), Brother International, 5DT Inc., eMagin Corporation, Facebook (Oculus), Avegant, Kopin Corporation, Magic Leap, Lenovo, Microsoft, HTC, MicroVision, Inc., Lumus Ltd., Kaiser Electro Optics Inc., Garmin, Optinvent, HTC Valve, LGE, N-Real, Epson, Zebra and Accupix of Korea. Numerous other start-up companies have announced their intentions to offer smart glasses and AR products and developer kits in the near future. Further, industry blogs have speculated that companies such as Apple may offer AR glasses in the near future.

 

Most of our competitors have greater financial, marketing, distribution and technical resources than we do. Moreover, our competitors may succeed in developing new micro-display-based personal display technologies and near-eye products that are more affordable or have more desirable features than our technology. If our products are unable to capture a reasonable portion of the smart wearable display market, our business strategy may fail.

  

18

 

 

Our business and products are subject to government regulation and we may incur additional compliance costs or, if we fail to comply with applicable regulations, may incur fines or be forced to suspend or cease operations.

 

In our current business and as we expand into new markets and product categories, we must comply with a wide variety of laws, regulations, standards and other requirements governing, among other things, electrical safety, wireless emissions, health and safety, e-commerce, consumer protection, export and import requirements, hazardous materials usage, product-related energy consumption, packaging, recycling and environmental matters. Compliance with these laws, regulations, standards and other requirements may be onerous and expensive, and they may be inconsistent from jurisdiction to jurisdiction (including from country to country), further increasing the cost of compliance and doing business. Our products may require regulatory approvals or satisfaction of other regulatory concerns in the various jurisdictions in which they are manufactured, sold or both. These requirements create procurement and design challenges that require us to incur additional costs identifying suppliers and manufacturers who can obtain and produce compliant materials, parts and products. Failure to comply with such requirements can subject us to liability, additional costs and reputational harm and, in extreme cases, force us to recall products or prevent us from selling our products in certain jurisdictions. If there is a new regulation, or change to an existing regulation, that significantly increases our costs of manufacturing or causes us to significantly alter the way that we manufacture our products, this would have a material adverse effect on our business, financial condition and results of operations. Additionally, while we have implemented policies and procedures designed to ensure compliance with applicable laws and regulations, there can be no assurance that our employees, contractors and agents will not violate such laws and regulations or our policies and procedures.

 

Our products must comply with certain requirements of the U.S. Federal Communications Commission (FCC) regulating electromagnetic radiation in order to be sold in the United States and with comparable requirements of the regulatory authorities of the EU, Japan, China and other jurisdictions in order to be sold in those jurisdictions. Our AR smart glasses products include wireless radios and receivers which require additional emission testing. We are also subject to various environmental laws and governmental regulations related to toxic, volatile, and other hazardous chemicals used in the third-party components incorporated into our products, including the Restriction of Certain Hazardous Substances Directive, or RoHS and the EU Waste Electrical and Electronic Equipment Directive, or the WEEE Directive, as well as the implementing legislation of the EU member states. This directive restricts the distribution of products within the EU that exceed very low maximum concentration amounts of certain substances, including lead. Similar laws and regulations have been passed or are pending in China, Japan, and numerous countries around the world and may be enacted in other regions, including in the United States, and we are, or may in the future be, subject to these laws and regulations.

 

From time to time, our products are subject to new domestic and international requirements. Compliance with regulations enacted in the future could substantially increase our cost of doing business or otherwise have a material adverse effect on our results of operations and our business. Any inability by us to comply with regulations in the future could result in the imposition of fines or in the suspension or cessation of our operations or sales in the applicable jurisdictions. Any such inability by us to comply with regulations may also result in our not being permitted, or limit our ability, to ship our products which would adversely affect our revenue and ability to achieve or maintain profitability.

   

Although we have policies and procedures in place requiring our contract manufacturers and major component suppliers to comply with the supply chain transparency requirements, such as RoHS Directive, we cannot provide assurance that our manufacturers and suppliers consistently comply with these requirements. In addition, if there are changes to these or other laws (or their interpretation) or if new related laws are passed in other jurisdictions, we may be required to re-engineer our products to use components compatible with these regulations. This re-engineering and component substitution could result in additional costs to us or disrupt our operations or logistics.

 

The WEEE Directive requires electronic goods producers to be responsible for the collection, recycling and treatment of such products. Changes in interpretation of the directive may cause us to incur costs or have additional regulatory requirements to meet in the future in order to comply with this directive, or with any similar laws adopted in other jurisdictions. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, substantial product inventory write-offs, reputational damage, penalties and other sanctions, which could harm our business and financial condition. We also expect that our products will be affected by new environmental laws and regulations on an ongoing basis. To date, our expenditures for environmental compliance have not had a material impact on our results of operations or cash flows and, although we cannot predict the future impact of such laws or regulations, they will likely result in additional costs and may increase penalties associated with violations or require us to change the content of our products or how they are manufactured, which could have a material adverse effect on our business and financial condition.

 

Product quality issues and a higher-than-expected number of warranty claims or returns could harm our business and operating results.

 

The products that we sell could contain defects in design or manufacture. Defects could also occur in the products or components that are supplied to us. There can be no assurance we will be able to detect and remedy all defects in the hardware and software we sell, which could result in product recalls, product redesign efforts, loss of revenue, reputational damage and significant warranty and other remediation expenses. Similar to other mobile and consumer electronics, our products have a risk of overheating in the course of usage or upon malfunction. Any such defect could result in harm to property or in personal injury. If we determine that a product does not meet product quality standards or may contain a defect, the launch of such product could be delayed until we remedy the quality issue or defect. The costs associated with any protracted delay necessary to remedy a quality issue or defect in a new product could be substantial.

 

19

 

 

We generally provide a one-year warranty on all of our products, except in certain European countries where it can be two years for some consumer-focused products. The occurrence of any material defects in our products could expose us to liability for damages and warranty claims in excess of our current reserves, and we could incur significant costs to correct any defects, warranty claims or other problems. In addition, if any of our product designs are defective or are alleged to be defective, we may be required to participate in a recall campaign. In part due to the terms of our warranty policy, any failure rate of our products that exceeds our expectations may result in unanticipated losses. Any negative publicity related to the perceived quality of our products could affect our brand image and decrease retailer, VAR, distributor and consumer confidence and demand, which could adversely affect our operating results and financial condition. Further, accidental damage coverage and extended warranties are regulated in the United States at the state level and are treated differently within each state. Additionally, outside of the United States, regulations for extended warranties and accidental damage vary from country to country. Changes in interpretation of the regulations concerning extended warranties and accidental damage coverage on a federal, state, local or international level may cause us to incur costs or have additional regulatory requirements to meet in the future in order to continue to offer our support services. Our failure to comply with past, present and future similar laws could result in reduced sales of our products, reputational damage, penalties and other sanctions, which could harm our business and financial condition.

  

Regulations related to conflict minerals may cause us to incur additional expenses and could limit the supply and increase the costs of certain materials used in the manufacturing of our products.

 

As a public company, we are subject to requirements under the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010, or the Dodd-Frank Act, that require us to determine, disclose and report whether or not our products contain conflict minerals. These requirements could adversely affect the sourcing, availability and pricing of the materials used in the manufacture of components used in our products. In addition, we have and will continue to incur additional costs to comply with the disclosure requirements, including costs related to conducting diligence procedures to determine the sources of conflict minerals that may be used in, or necessary for the production of our products and, if applicable, potential changes to products, processes or sources of supply as a consequence of such verification activities. We also may face reputational harm if we determine that certain of our products contain minerals not determined to be conflict free or if we are unable to alter our products, processes or sources of supply to avoid such materials.

 

Our products will likely experience declining unit prices and we may not be able to offset that decline with production cost decreases or higher unit sales.

 

In the markets in which we compete, prices of established consumer electronics displays, personal computers, and mobile products tend to decline significantly over time or as new enhanced versions are introduced, frequently every 12 to 24 months. In order to maintain adequate product profit margins over the long term, we believe that we will need to continuously develop product enhancements and new technologies that will either slow price declines of our products or reduce the cost of producing and delivering our products. While we anticipate many opportunities to reduce production costs over time, we may not be able to reduce our component costs. We expect to attempt to offset the anticipated decrease in our average selling price by introducing new products, increasing our sales volumes or adjusting our product mix. If we fail to do so, our results of operations will be materially and adversely affected.

  

20

 

 

Our products could infringe on the intellectual property rights of others.

 

Companies in the consumer electronics, wireless communications, semiconductor, IT and display industries steadfastly pursue and protect intellectual property rights, often times resulting in considerable and costly litigation to determine the validity of patents and claims by third parties of infringement of patents or other intellectual property rights. Our products could be found to infringe on the intellectual property rights of others. Other companies may hold or obtain patents or inventions or other proprietary rights in technology necessary for our business. Periodically, other companies inquire about our products and technology in their attempts to assess whether we violate their intellectual property rights. If we are forced to defend against infringement claims, we may face costly litigation, diversion of technical and management personnel, and product shipment delays, even if the allegations of infringement are unwarranted. If there is a successful claim of infringement against us and we are unable to develop non-infringing technology or license the infringed or similar technology on a timely basis, or if we are required to cease using one or more of our business or product names due to a successful trademark infringement claim against us, it could adversely affect our business.

 

Our intellectual property rights and proprietary rights may not adequately protect our products.

 

Our commercial success will depend substantially on our ability to obtain patents and other intellectual property rights and maintain adequate legal protection for our products in the United States and other countries. We will be able to protect our intellectual property from unauthorized use by third parties only to the extent that these assets are covered by valid and enforceable patents, trademarks, copyrights or other intellectual property rights, or are effectively maintained as trade secrets. As of the date of this filing, we have 71 issued U.S. and foreign patents and 79 pending U.S. and foreign patent applications. We apply for patents covering our products, services, technologies and designs, as we deem appropriate. We may fail to apply for patents on important products, services, technologies or designs in a timely fashion, or at all. We do not know whether any of our patent applications will result in the issuance of any patents. Even if patents are issued, they may not be sufficient to protect our products, services, technologies, or designs. Our existing and future patents may not be sufficiently broad to prevent others from developing competing products, services technologies, or designs. Intellectual property protection and patent rights outside of the United States are even less predictable. As a result, the validity and enforceability of patents cannot be predicted with certainty. Moreover, we cannot be certain whether:

 

  ·

we were the first to conceive, reduce to practice, invent, or file the inventions covered by each of our issued patents and pending patent applications;

     
  · others will independently develop similar or alternative products, technologies, services or designs or duplicate any of our products, technologies, services or designs;
     
  · any patents issued to us will provide us with any competitive advantages, or will be challenged by third parties;
     
  · we will develop additional proprietary products, services, technologies or designs that are patentable; or
     
  · the patents of others will have an adverse effect on our business. 

 

21

 

 

The patents we own or license and those that may be issued to us in the future may be challenged, invalidated, rendered unenforceable or circumvented, and the rights granted under any issued patents may not provide us with proprietary protection or competitive advantages. Moreover, third parties could practice our inventions in territories where we do not have patent protection or in territories where they could obtain a compulsory license to our technology where patented. Such third parties may then try to import products made using our inventions into the United States or other territories. We cannot ensure that any of our pending patent applications will result in issued patents, or even if issued, predict the breadth, validity and enforceability of the claims upheld in our and other companies’ patents.

 

Unauthorized parties may attempt to copy or otherwise use aspects of our processes and products that we regard as proprietary. Policing unauthorized use of our proprietary information and technology is difficult and can be costly, and our efforts to do so may not prevent misappropriation of our technologies. We may become engaged in litigation to protect or enforce our patent and other intellectual property rights or in International Trade Commission proceedings to abate the importation of goods that would compete unfairly with our products and, if unsuccessful, these actions could result in the loss of patent or other intellectual property rights protection for the key technologies on which our business strategy depends.

 

We rely in part on unpatented proprietary technology, and others may independently develop the same or similar technology or otherwise obtain access to our unpatented technology. We require employees, contractors, consultants, financial advisors, suppliers and strategic partners to enter into confidentiality and intellectual property assignment agreements (as appropriate), but these agreements may not provide sufficient protection for our trade secrets, know-how or other proprietary information.

 

The laws of certain countries do not protect intellectual property and proprietary rights to the same extent as the laws of the United States and, therefore, in certain jurisdictions, we may be unable to protect our products, services, technologies and designs adequately against unauthorized third-party copying, infringement or use, which could adversely affect our competitive position. To protect or enforce our intellectual property rights, we may initiate proceedings or litigation against third parties. Such proceedings or litigation may be necessary to protect our trade secrets or know-how, products, technologies, designs, brands, reputation, likeness, authorship works or other intellectual property rights. Such proceedings or litigation also may be necessary to determine the enforceability, scope and validity of the proprietary rights of others. Any proceedings or lawsuits that we initiate could be expensive, take significant time and divert management’s attention from other business concerns. Additionally, we may provoke third parties to assert claims against us, which could invalidate or narrow the scope of our own intellectual property rights. We may not prevail in any proceedings or lawsuits that we initiate and the damages or other remedies awarded, if any, may be commercially valuable. The occurrence of any of these events may adversely affect our business, financial condition and operating results.

 

We have registered and applied to register certain of our trademarks in several jurisdictions worldwide. In some jurisdictions where we have applied to register our trademarks, other applications or registrations exist for the same, similar or otherwise related products or services. If we are not successful in arguing that there is no likelihood of confusion between our marks and the marks that are the subject of the other applications or registrations owned by third parties, our applications may be denied, preventing us from obtaining trademark registrations and adequate protection for our marks in the relevant jurisdictions, which could impact our ability to build our brand identity and market our products and services in those jurisdictions. Whether or not our application is denied, third parties may claim that our trademarks infringe their rights. As a result, we could be forced to pay significant settlement costs or cease the use of these trademarks and associated elements of our brand in the United States or other jurisdictions.

 

Even in those jurisdictions where we are able to register our trademarks, competitors may adopt or apply to register similar trademarks to ours, may register domain names that mimic ours or incorporate our trademarks, or may purchase keywords that are identical or confusingly similar to our brand names as terms in Internet search engine advertising programs, which could impede our ability to build our brand identity and lead to confusion among potential customers of our products and services. If we are not successful in proving that we have prior rights in our marks and arguing that there is a likelihood of confusion between our marks and the marks of these third parties, our inability to prevent these third parties from using may negatively impact the strength, value and effectiveness of our brand names and our ability to market our products and prevent consumer confusion.

 

If we lose our rights under our third-party technology licenses, our operations could be adversely affected.

 

Our business depends in part on technology rights and software licensed from third parties. We could lose our exclusivity or other rights to use the technology under our licenses if we fail to comply with the terms and performance requirements of the licenses. In addition, certain licensors may terminate a license upon our breach and have the right to consent to sublicense arrangements. If we were to lose our rights under any of these licenses, or if we were unable to obtain required consents to future sublicenses, we could lose a competitive advantage in the market, and may even lose the ability to commercialize certain products or technologies completely. Either of these results could substantially decrease our revenues.

 

22

 

 

Our business depends in part on access to third-party platforms or technologies, and if the access is withdrawn, denied, or is not available on terms acceptable to us, or if the platforms or technologies change without notice to us, our business and operating results could be adversely affected.

 

With the growth of mobile devices and personal voice assistants, cloud services and AI, the number of supporting platforms has grown, and with it the complexity and increased need for us to have business and contractual relationships with the platform owners in order to produce products compatible with these platforms and enable access to and use of these platforms with our products. Our product strategy includes current and future products designed for use with third-party platforms or software, such as iPhone, Android phones, Google Assistant and Amazon Alexa. Our business in these categories relies on our access to the platforms of third parties, some of whom are our competitors. Platform owners that are competitors may limit or decline access to their platforms, and in any case have a competitive advantage in designing products for their own platforms and may produce products that work better, or are perceived to work better, than our products in connection with those platforms. As we expand the number of platforms and software applications with which our products are compatible, we may not be successful in launching products for those platforms or software applications and/or we may not be successful in establishing strong relationships with the new platform or software owners, which could negatively impact our ability to develop and produce high-quality products on a timely basis for those platforms and software applications. We may otherwise fail to navigate various new relationships, which could adversely affect our relationships with existing platform or software owners.

 

Our access to third-party platforms may also require paying a royalty or licensing fee, which lowers our product margins or may otherwise be on terms that are not acceptable to us. In addition, the third-party platforms or technologies used to interact with our product portfolio can be delayed in production or can change without prior notice to us, which can result in our having excess inventory, lower margins, or customer support issues.

 

If we are unable to access third-party platforms or technologies, or if our access is withdrawn, denied, or is not available on terms acceptable to us, or if the platforms or technologies are delayed or change without notice to us, our business and operating results could be adversely affected.

 

If our customers are not satisfied with our technical support, firmware or software updates on some of our products, they may choose not to purchase our products, which would adversely impact our business and operating results.

 

Our business relies, in part, on our customers’ satisfaction with the technical support, firmware, software and security updates we provide to support our products. If we fail to provide technical support services and necessary updates that are responsive, satisfy our customers’ expectations and resolve issues that they encounter with our products, customers may choose not to purchase additional products and we may face brand and reputational harm, which could adversely affect our operating results.

 

Our use of open source software could negatively affect our ability to sell our products and could subject us to possible litigation.

 

We incorporate open source software into our products. Open source software is generally licensed by its authors or other third parties under open source licenses. Some of these licenses contain requirements that we make available source code for modifications or derivative works we create based upon the open source software, and that we license such modifications or derivative works under the terms of a particular open source license or other license granting third parties certain rights of further use. Additionally, if a third-party software provider has incorporated open source software into software that we license from such provider, we could be required to disclose any of our source code that incorporates or is a modification of our licensed software. If an author or other third-party that distributes open source software that we use or license were to allege that we had not complied with the conditions of the applicable license, we could be required to incur significant legal expenses defending against those allegations and could be subject to significant damages, enjoined from offering or selling our products that contained the open source software and be required to comply with the foregoing conditions. Any of the foregoing could disrupt and harm our business and financial condition.

 

23

 

 

Our dependence on sales to VARs, resellers, and distributors increases the risks of managing our supply chain and may result in excess inventory or inventory shortages.

 

The majority of our various reseller relationships for our Smart Glasses and AR products and their accessories could involve them taking inventory positions and reselling to multiple customers. Under some typical distributor relationships, we would not recognize revenue until the distributors sell the product to their end user customers and receive payment thereon; however, at this time we do not currently enter into these types of arrangements. Our distributor and VAR relationships may reduce our ability to forecast sales and increase risks to our business. Since our distributors and VARs would act as intermediaries between us and the end user customers or resellers, we would be required to rely on our distributors to accurately report inventory levels and production forecasts. This may require us to manage a more complex supply chain and monitor the financial condition and credit worthiness of our distributors and VARs and their major end user customers. Our failure to manage one or more of these risks could result in excess inventory or shortages that could adversely impact our operating results and financial condition.

 

Our operating results may be adversely impacted by worldwide political, economic and public health uncertainties and specific conditions in the markets we address.

 

Any worsening of global economic, financial, or public health conditions, including global pandemics, could materially adversely affect (i) our ability to raise, or the terms of needed capital; (ii) demand for our current and future products; and (iii) the supply of components for our products. We cannot predict the timing, strength, or duration of any economic slowdown or subsequent economic recovery, worldwide, or in the display industry.

  

Our results of operations may suffer if we are not able to successfully manage our increasing exposure to foreign exchange rate risks.

 

A substantial majority of our sales and cost of components are denominated in U.S. dollars. As our business grows, both our sales and production costs may increasingly be denominated in other currencies. Where such sales or production costs are denominated in other currencies, they are converted to U.S. dollars for the purpose of calculating any sales or costs to us. Our sales may decrease as a result of any appreciation of the U.S. dollar against these other currencies.

 

The majority of our current expenditures are incurred in U.S. dollars and many of our components come from countries that currently peg their currency against the U.S. dollar. If the pegged exchange rates change adversely or are allowed to float up, additional U.S. dollars will be required to fund our purchases of these components.

 

Although we do not currently enter into currency option contracts or engage in other hedging activities, we may do so in the future. There is no assurance that we will undertake any such hedging activities or that, if we do so, they will be successful in reducing the risks to us of our exposure to foreign currency fluctuations.

 

Due to our significant level of international operations, including the use of foreign contract manufactures, we are subject to international operational, financial, legal, political and public health risks which could harm our operating results.

 

We purchase product components from our suppliers and engage third-party contract manufacturing firms to perform electronic circuit board and cable assemblies. We moved the assembly of our finished products to our plant in Rochester, New York in late summer 2019. Additionally, we use our Rochester, New York facility for the production of waveguides and their related display engines and intend to do so for some time. In the future, our mature products could have their final assembly performed outside the USA. Accordingly, a substantial part of our operations, including manufacturing of certain components used in our products, are outside of the United States and many of our customers and suppliers have some or all of their operations in countries other than the United States. Risks associated with our doing business outside of the United States include:

  

  · compliance burdens and costs with a wide variety of foreign laws and regulations, particularly labor, environmental and other laws and regulations that govern our operations in those countries;

 

  · legal uncertainties regarding foreign taxes, tariffs, border taxes, quotas, export controls, export licenses, import controls and other trade barriers;

 

  · economic instability and high levels of inflation in the countries of our suppliers and customers, particularly in the Asia-Pacific region, causing delays or reductions in orders for their products and therefore our sales;

  

  · political or public health instability, including global pandemics, in the countries in which our suppliers operate;

 

  · changes or volatility in currency exchange rates;

  

  · difficulties in collecting accounts receivable and longer accounts receivable payment cycles; and

 

  · Any of these factors could harm our own, our suppliers’ and our customers’ international operations and businesses and impair our and/or their ability to continue expanding into international markets.

 

24

 

 

We could be adversely affected by violations of the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act or similar anti-bribery laws in other jurisdictions in which we operate.

 

The global nature of our business and the significance of our international revenue create various domestic and local regulatory challenges and subject us to risks associated with our international operations. We operate in areas of the world that experience corruption by government officials to some degree and, in certain circumstances, compliance with anti-bribery and anticorruption laws may conflict with local customs and practices. Our global operations require us to import and export to and from several countries, which geographically expands our compliance obligations. In addition, changes in such laws could result in increased regulatory requirements and compliance costs which could adversely affect our business, financial condition and results of operations. 

 

The U.S. Foreign Corrupt Practices Act (FCPA), the U.K. Bribery Act 2010 (U.K. Bribery Act), and similar anti-bribery and anticorruption laws in other jurisdictions generally prohibit U.S.-based companies and their intermediaries from making improper payments to non-U.S. officials for the purpose of obtaining or retaining business, directing business to another, or securing an advantage. In addition, U.S. public companies are required to maintain records that accurately and fairly represent their transactions and have an adequate system of internal accounting controls. Under the FCPA, U.S. companies may be held liable for the corrupt actions taken by directors, officers, employees, agents, or other strategic or local partners or representatives. As such, if we or our intermediaries fail to comply with the requirements of the FCPA or similar legislation, governmental authorities in the United States and elsewhere could seek to impose substantial civil and/or criminal fines and penalties which could have a material adverse effect on our business, reputation, operating results and financial condition.

 

We are subject to governmental export and import controls and economic sanctions laws that could subject us to liability and impair our ability to compete in international markets.

 

The U.S. and various foreign governments have imposed controls, export license requirements and restrictions on the import or export of some technologies. Our products are subject to U.S. export controls, including the Commerce Department’s Export Administration Regulations and various economic and trade sanctions regulations established by the Treasury Department’s Office of Foreign Assets Controls, and exports of our products must be made in compliance with these laws. Furthermore, U.S. export control laws and economic sanctions prohibit the provision of products and services to countries, governments, and persons targeted by U.S. sanctions. Even though we take precautions to prevent our products from being provided to targets of U.S. sanctions, our products, including our firmware updates, could be provided to those targets or provided by our customers despite such precautions. Any such provision could have negative consequences, including government investigations, penalties and reputational harm. Our failure to obtain required import or export approval for our products could harm our international and domestic sales and adversely affect our revenue.

 

If significant tariffs or other restrictions are placed and maintained on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially harmed.

 

If significant tariffs or other restrictions are placed on Chinese imports or any related counter-measures are taken by China, our revenue and results of operations may be materially harmed. In July 2018, the Trump Administration introduced a list of thousands of categories of goods that begun facing tariffs of 10%, which may be increased to 25% in 2019 if a new trade deal with China is not concluded. These tariffs currently affect some of our products and we may be required to raise our prices on those products due to the tariffs, which may result in a loss of customers and harm our operating performance. If the existing tariffs are expanded or interpreted by a court or governmental agency to apply to any of our other products, we may be required to raise our prices on those products, which may further result in a loss of customers and harm our operating performance. It is possible further tariffs will be imposed on imports of our products, or that our business will be impacted by retaliatory trade measures taken by China or other countries in response to existing or future tariffs, causing us to raise prices or make changes to our operations, any of which could materially harm our revenue or operating results.

 

Changes in trade policy in the United States and other countries, including changes in trade agreements and the imposition of tariffs and the resulting consequences, may have adverse impacts on our business, results of operations and financial condition.

 

The U.S. government has indicated and demonstrated its intent to alter its approach to international trade policy through the renegotiation, and potential termination, of certain existing bilateral or multilateral trade agreements and treaties with, and the imposition of tariffs on a wide range of products and other goods from, China, countries in EMEA and other countries. Given our manufacturing in those countries, and our lack of manufacturing elsewhere, policy changes in the United States or other countries, such as the tariffs already proposed, implemented and threatened, present particular risks for us. Tariffs already announced and implemented are having an adverse effect on certain of our products, tariffs announced but not yet implemented may have an adverse effect on many of our products, and threatened tariffs could adversely affect more or all of our products. There are also risks associated with retaliatory tariffs and resulting trade wars. We cannot predict future trade policy, the terms of any renegotiated trade agreements or treaties, or tariffs and their impact on our business. A trade war could have a significant adverse effect on world trade and the world economy. To the extent that trade tariffs and other restrictions imposed by the United States or other countries increase the price of, or limit the amount of, our products or components or materials used in our products imported into the United States or other countries, or create adverse tax consequences, the sales, cost or gross margin of our products may be adversely affected and the demand from our customers for products and services may be diminished. Uncertainty surrounding international trade policy and disputes and protectionist measures could also have an adverse effect on consumer confidence and spending. If we deem it necessary to alter all or a portion of our activities or operations in response to such policies, agreements or tariffs, our capital and operating costs may increase. Our ongoing efforts to address these risks may not be effective and may have long-term adverse effects on our operations and operating results that we may not be able to reverse. Such efforts may also take time to implement or to have an effect, and may result in adverse quarterly financial results or fluctuations in our quarterly financial results. As a result, changes in international trade policy, changes in trade agreements and tariffs could adversely affect our business, results of operations and financial condition.

 

25

 

 

Any significant disruption to our ecommerce business could result in lost sales.

 

Our sales through our ecommerce channel have been growing. Sales through vuzix.com and our related EU, UK and Japanese web stores generally have higher profit margins than sales through resellers, VARs and distributors. Online sales are subject to a number of risks. System interruptions or delays could cause potential customers to fail to purchase our products and could harm our brand. The operation of our direct to consumer ecommerce business through vuzix.com depends on our ability to maintain the efficient and uninterrupted operation of online order-taking and fulfillment operations. Our ecommerce operations subject us to certain risks that could have an adverse effect on our operating results, including risks related to the computer systems that operate our website and related support systems, such as system failures, viruses, denial of services attacks, computer hackers and similar disruptions. If we are unable to continually add software and hardware, effectively upgrade our systems and network infrastructure and take other steps to improve the efficiency of our systems, system interruptions or delays could occur that would adversely affect our operating results.

 

We utilize third-party vendors for our customer-facing ecommerce technology, portions of our order management system and fulfillment internationally. We depend on our technology vendors to manage “up-time” of the front-end ecommerce store, manage the intake of our orders, and export orders for fulfillment. Any failure on the part of our third-party ecommerce vendors or in our ability to transition third-party services effectively could result in lost sales and harm our business.

 

We collect, store, process and use our customers’ personally identifiable information and other data, which subjects us to governmental regulation and other legal obligations related to privacy, information security and data protection. Any cybersecurity breaches or our actual or perceived failure to comply with such legal obligations by us, or by our third-party service providers or partners, could harm our business.

 

We collect, store, process and use our customers’ personally identifiable information and other data in our transactions with them, and we rely on third parties that are not directly under our control to do so as well. While we take reasonable measures intended to protect the security, integrity and confidentiality of the personal information and other sensitive information we collect, store or transmit, we cannot guarantee that inadvertent or unauthorized use or disclosure will not occur, or that third parties will not gain unauthorized access to this information. While our privacy policies currently prohibit such activities, our third-party service providers or partners may engage in such activity without our knowledge or consent. If we or our third- party service providers were to experience a breach, disruption or failure of systems compromising our customers’ data, or if one of our third-party service providers or partners were to access our customers’ personal data without our authorization, our brand and reputation could be adversely affected, use of our products could decrease and we could be exposed to a risk of loss, litigation and regulatory proceedings.

 

Regulatory scrutiny of privacy, data collection, use of data and data protection is intensifying globally, and the personal information and other data we collect, store, process and use is increasingly subject to legislation and regulations in numerous jurisdictions around the world, especially in Europe. These laws often develop in ways we cannot predict and may materially increase our cost of doing business, particularly as we expand the nature and types of products we offer. For example, the General Data Protection Regulation (the "GDPR"), which came into effect in the EU in May 2018 and superseded prior EU data protection legislation, imposes more stringent data protection requirements and provides for greater penalties for noncompliance.

 

Further, data protection legislation is also becoming increasingly common in the United States at both the federal and state level. For example, in June 2018, the State of California enacted the California Consumer Privacy Act of 2018 (the "CCPA"), which went into effect on January 1, 2020. The CCPA requires companies that process information on California residents to make new disclosures to consumers about their data collection, use and sharing practices, allows consumers to opt out of certain data sharing with third parties and provides a new cause of action for data breaches. Additionally, the Federal Trade Commission and many state attorneys general are interpreting federal and state consumer protection laws to impose standards for the online collection, use, dissemination and security of data. The burdens imposed by the CCPA and other similar laws that may be enacted at the federal and state level may require us to modify our data processing practices and policies and/or to incur substantial expenditures in order to comply.

 

Cybersecurity risks could adversely affect our business and disrupt our operations.

 

The threats to network and data security are increasingly diverse and sophisticated. Despite our efforts and processes to prevent breaches, our devices, as well as our servers, computer systems, and those of third parties that we use in our operations are vulnerable to cybersecurity risks, including cyber-attacks such as viruses and worms, phishing attacks, denial-of-service attacks, physical or electronic break-ins, employee theft or misuse, and similar disruptions from unauthorized tampering with our servers and computer systems or those of third parties that we use in our operations, which could lead to interruptions, delays, loss of critical data, unauthorized access to user data, and loss of consumer confidence. In addition, we may be the target of email scams that attempt to acquire personal information or company assets. Despite our efforts to create security barriers to such threats, we may not be able to entirely mitigate these risks. Any cyber-attack that attempts to obtain our or our users’ data and assets, disrupt our service, or otherwise access our systems, or those of third parties we use, if successful, could adversely affect our business, operating results, and financial condition, be expensive to remedy, and damage our reputation. In addition, any such breaches may result in negative publicity, adversely affect our brand, decrease demand for our products and services, and adversely affect our operating results and financial condition.

 

26

 

 

We may lose the services of key management personnel and may not be able to attract and retain other necessary personnel.

 

Changes in our management could have an adverse effect on our business, and in particular while our staff is relatively small with under 100 employees, we are dependent upon the active participation of several key management personnel, including Paul Travers, our President and Chief Executive Officer. Mr. Travers is critical to the strategic direction and overall management of our company as well as our research and development process. The loss of Mr. Travers could adversely affect our business, financial condition and operating results. We do not carry key person life insurance on any of our senior management or other key personnel other than our CEO. Our Executive Vice President and Chief Financial Officer, Grant Russell, a Canadian citizen, currently has his principal residence in Vancouver, Canada and a second residence in West Henrietta, New York. If he becomes unable to legally or efficiently travel to and work in the United States, his ability to perform some of his duties could be materially adversely affected.

 

We will need to hire and retain highly skilled technical personnel as employees and as independent contractors in order to develop our products and grow our business. The competition for highly skilled technical, managerial and other personnel is at times intense. Our recruiting and retention success is substantially dependent upon our ability to offer competitive salaries and benefits to our employees. We must compete with companies that possess greater financial and other resources than we do and that may be more attractive to potential employees and contractors. To be competitive, we may have to increase the compensation, bonuses, stock options and other fringe benefits we offer to employees in order to attract and retain such personnel. The costs of retaining or attracting new personnel may have a material adverse effect on our business and operating results. If we fail to attract and retain the technical and managerial personnel required to be successful, our business, operating results and financial condition could be materially adversely affected.

  

27

 

 

We may acquire other businesses or receive offers to be acquired, which could require significant management attention, disrupt our business, dilute stockholder value and adversely affect our operating results.

 

As part of our business strategy, we may make investments in complementary businesses, products, services or technologies. We have not made any material acquisitions to date and, as a result, our ability as an organization to successfully acquire and integrate other companies, products, services or technologies is unproven. We may not be able to find suitable acquisition candidates and we may not be able to complete acquisitions on favorable terms, if at all. If we do complete acquisitions, we may not ultimately strengthen our competitive position or achieve our goals, and any acquisitions we complete could be viewed negatively by customers or investors. In addition, if we fail to successfully integrate such acquisitions, or the technologies associated with such acquisitions, into our company, the revenue and operating results of the combined company could be adversely affected. Any integration process will require significant time and resources, and we may not be able to manage the process successfully. We may not successfully evaluate or utilize the acquired technology and accurately forecast the financial impact of an acquisition transaction, including accounting charges. We may have to pay cash, incur debt or issue equity securities to pay for any such acquisition, each of which could affect our financial condition or the value of our capital stock. The sale of equity or issuance of debt to finance any such acquisitions could result in dilution to our stockholders. The incurrence of indebtedness would result in increased fixed obligations and could also include covenants or other restrictions that would impede our ability to manage our operations. Additionally, we may receive indications of interest from other parties interested in acquiring some or all of our business. The time required to evaluate such indications of interest could require significant attention from management, disrupt the ordinary functioning of our business and adversely affect our operating results.

 

Our failure to effectively manage growth could harm our business.

 

We intend to expand the number and types of products we sell. We will need to replace and regularly introduce on a timely basis new products and technologies, enhance existing products, and effectively stimulate customer demand for new products and upgraded or enhanced versions of our existing products.

 

The replacement and expansion of our products places a significant strain on our management, operations and engineering resources. Specifically, the areas that are strained most by these activities include the following:

 

  · New Product Launches: With the changes in and growth of our product portfolio, we will experience increased complexity in coordinating product development, manufacturing, and shipping. As this complexity increases, it places a strain on our ability to accurately coordinate the commercial launch of our products with adequate supply to meet anticipated customer demand and effectively market to stimulate demand and market acceptance. We have experienced delays in the past. If we are unable to scale and improve our product launch coordination, we could frustrate our customers and lose possible retail shelf space and product sales;

 

  · Existing Products Impacted by New Introductions: The introduction of new products or product enhancements may shorten the life cycle of our existing products, or replace sales of some of our current products, thereby offsetting the benefit of even a successful product introduction and may cause customers to defer purchasing our existing products in anticipation of the new products and potentially lead to challenges in managing inventory of existing products. We may also provide price protection to some of our retailers as a result of our new product introductions and reduce the prices of existing products. If we fail to effectively manage new product introductions, our revenue and profitability may be harmed; and

 

  · Forecasting, Planning and Supply Chain Logistics: With the changes in and growth of our product portfolio, we will experience increased complexity in forecasting customer demand, in planning for production, and in transportation and logistics management. If we are unable to scale and improve our forecasting, planning, production, and logistics management, we could frustrate our customers, lose product sales or accumulate excess inventory.

 

Our facilities and information systems and those of our key suppliers could be damaged as a result of disasters or unpredictable events, which could have an adverse effect on our business operations.

 

We operate the majority of our business from one location in West Henrietta, a suburb of the Rochester, New York. We also rely on third-party manufacturing plants in the US and Asia and third-party logistics, sales and marketing facilities in Japan and England, and in other parts of the world to provide key components for our products and services. If major disasters such as earthquakes, pandemics, fires, floods, wars, terrorist attacks, computer viruses, transportation disasters or other events occur in any of these locations, or our information systems or communications network or those of any of our key component suppliers breaks down or operates improperly as a result of such events, our facilities or those of our key suppliers may be seriously damaged, and we may have to stop or delay production and shipment of our products. We may also incur expenses relating to such damages. If production or shipment of our products or components is stopped or delayed or if we incur any increased expenses as a result of damage to our facilities, our business, operating results and financial condition could be materially adversely affected.

  

28

 

 

Risks Related to Manufacturing

 

We do not control our contract manufacturers or suppliers or require them to comply with a formal code of conduct, and actions that they might take could harm our reputation and sales.

 

We do not control our contract manufacturers or suppliers, including their labor, environmental or other practices, or require them to comply with a formal code of conduct. Though we conduct periodic visits to some of our contract manufacturers and suppliers, these visits are not frequent or thorough enough to detect non-compliance with applicable laws and good industry practices. A violation of labor, environmental or other laws by our contract manufacturers or suppliers, or a failure of these parties to follow ethical business practices, could lead to negative publicity and harm our reputation. In addition, we may choose to seek alternative manufacturers or suppliers if these violations or failures were to occur. Identifying and qualifying new manufacturers or suppliers can be time consuming and we might not be able to substitute suitable alternatives in a timely manner or at an acceptable cost. Other consumer products companies have faced significant criticism for the actions of their manufacturers and suppliers, and we could face such criticism ourselves. Any of these events could adversely affect our brand, harm our reputation, reduce demand for our products and harm our ability to meet demand if we need to identify alternative manufacturers or suppliers.

 

We rely on third-party suppliers, some of which are sole-source suppliers, to provide components for our products which may lead to supply shortages, long lead times for components, and supply changes, any of which could disrupt our supply chain and may increase our costs.

 

Our ability to meet customer demand depends, in part, on our ability to obtain timely and adequate delivery of components for our products. All of the components that go into the manufacturing of our smart glasses products and accessories, other than waveguide optics, are sourced from third-party suppliers.

 

Some of the key components used to manufacture our products come from a limited or single source of supply, or by a supplier that could potentially become a competitor. Our contract manufacturers generally purchase these components on our behalf from approved suppliers. We are subject to the risk of shortages and long lead times in the supply of these components and the risk that our suppliers discontinue or modify components used in our products. In addition, the lead times associated with certain components are lengthy and preclude rapid changes in quantities and delivery schedules. We have in the past experienced and may in the future experience component shortages, and the availability of these components may be unpredictable.

 

If we lose access to components from a particular supplier or experience a significant disruption in the supply of products and components from a current supplier, we may be unable to locate alternative suppliers of comparable quality at an acceptable price, or at all, and our business could be materially and adversely affected. In addition, if we experience a significant increase in demand for our products, our suppliers might not have the capacity or elect not to meet our needs as they allocate components to other customers. Developing suitable alternate sources of supply for these components may be time-consuming, difficult and costly, and we may not be able to source these components on terms that are acceptable to us, or at all, which may adversely affect our ability to meet our development requirements or to fill our orders in a timely or cost-effective manner. Identifying a suitable supplier is an involved process that requires us to become satisfied with the supplier’s quality control, responsiveness and service, financial stability, labor and other ethical practices, and if we seek to source materials from new suppliers, there can be no assurance that we could do so in a manner that does not disrupt the manufacture and sale of our products.

 

29

 

 

Our reliance on single source, or a small number of suppliers involves a number of additional risks, including risks related to supplier capacity constraints, price increases, timely delivery, component quality, failure of a key supplier to remain in business and adjust to market conditions, delays in, or the inability to execute on, a supplier roadmap for components and technologies; and natural disasters, fire, acts of terrorism or other catastrophic events, including global pandemics.

 

We do not currently own or operate any manufacturing facilities for micro-displays, one of the key components in our products. Certain other components and services necessary for the manufacture of our products are available from only a limited number of sources, and other components and services are only available from a single source. We currently purchase almost all of the micro-displays used in our Smart Glasses products from Sony, Texas Instruments, and Kopin Corporation. Our relationship with these companies generally is on a purchase order basis and these firms do not have a contractual obligation to provide adequate supply or acceptable pricing to us on a long-term basis. These firms could discontinue sourcing merchandise for us at any time. If any of these firms were to discontinue its relationship with us, or discontinue providing specific products to us, and we are unable to contract with a new supplier that can meet our requirements, or if they or such other supplier were to suffer a disruption in their production, we could experience disruption of our inventory flow, a decrease in sales and the possible need to re-design our products. Any such event could disrupt our operations and have an adverse effect on our business, financial condition and results of operations. Several new LCOS and alternative OLED suppliers have begun offering micro-displays suitable for use in our products. With new tooling and electronics, any one of these alternative displays could be incorporated into our products but our costs of production could be higher, they may offer less performance, and, as a result, make our products too costly and less desirable.

  

The manufacture of waveguides encompasses several complex processes and several steps of our production processes are dependent upon certain critical machines and tools which could result in delivery interruptions, which could adversely affect our operating results.

 

Our product technology and manufacturing processes are evolving which can result in production challenges and difficulties. We may be unable to produce our products in sufficient quantity and quality to maintain existing customers and attract new customers. In addition, we may experience manufacturing problems which could result in delays in delivery of orders or product introductions.

 

30

 

 

Several steps of our production processes are dependent upon certain critical machines and tools which could result in delivery interruptions and foregone revenues.

 

We currently have little equipment redundancy in our manufacturing facility. If we experience any significant disruption in the operation of our manufacturing facility or a serious failure of a critical piece of equipment, we may be unable to supply products to our customers in a timely manner. Interruptions in our manufacturing could be caused by equipment problems, the introduction of new equipment into the manufacturing process or delays in the delivery of new manufacturing equipment. Lead-time for delivery, installation, testing, repair and maintenance of manufacturing equipment can be extensive. We have experienced production interruptions in the past and no assurance can be given that we will not lose potential sales or be able to meet production orders due to future production interruptions in our manufacturing lines.

  

Our waveguide and display engine products are subject to lengthy OEM development periods.

 

We sell some of our waveguide and display engines with micro-displays to OEMs with the objective that they then incorporate them into products they sell. OEMs determine during their product development phase whether they will incorporate our products. The time elapsed between initial sampling of our products by OEMs, the custom design of our products to meet specific OEM product requirements, and the ultimate incorporation of our products into OEM products is significant, often with a duration of between one to two years. If our products fail to meet our OEM customers’ cost, performance or technical requirements or if unexpected technical challenges arise in the integration of our products into OEM consumer products, our operating results could be significantly and adversely affected. Long delays in achieving customer qualification and incorporation of our products also could adversely affect our business.

 

We depend on third parties to provide integrated circuit chip sets and other critical components for use in our products.

 

We do not manufacture the integrated circuit chip sets, optics, micro-displays, backlights, projection engines, printed circuit boards or other electronic components which are used in our products. Instead, we purchase them from third-party suppliers or rely on third-party independent contractors for these integrated circuit chip sets and other critical components, some of which are customized or custom made for us. We also may use third parties to assemble all or portions of our products. Some of these third-party contractors and suppliers are small companies with limited financial resources. If any of these third-party contractors or suppliers were unable or unwilling to supply these integrated circuit chip sets or other critical components to us, we would be unable to manufacture and sell our products until a suitable replacement supplier could be found. We may be unable to find, if and when needed a replacement third-party contractor or supplier on reasonable terms or in a timely manner. Any interruption in our ability to manufacture and distribute our products could cause our business to be unsuccessful.

  

The mobile consumer electronics and IT industries are subject to significant fluctuations in the availability of components. If we do not properly anticipate the need for critical components, we may be unable to meet the demands of our customers and end-users on a timely basis.

 

The availability of certain of the components that we require to produce our AR Smart Glasses and other near-eye display products may decrease. As the availability of components decreases, the cost of acquiring those components ordinarily increases. High growth product categories such as the consumer electronics and mobile phone markets have experienced chronic shortages of components during periods of exceptionally high demand. If we do not properly anticipate the need for or procure critical components, we may pay higher prices for those components, our gross margins may decrease and we may be unable to meet the demands of our customers and end-users, which could reduce our competitiveness, cause a decline in our market share and have a material adverse effect on our results of operations.

 

Risks Related to Our Common Stock

 

Additional stock offerings in the future may dilute then existing stockholders’ percentage ownership of our company.

 

Given our capital plans, needs and expectations, we may need to issue additional shares of common stock or securities convertible or exercisable for shares of common stock, including convertible preferred stock, convertible notes, stock options or warrants. The issuance of additional securities in the future will dilute the percentage ownership of then existing stockholders.

 

The rights of holders of common stock may be impaired by the possible future issuance of additional preferred stock.

 

Our Board of Directors has the right, without approval of the holders of our common stock, to issue additional preferred stock with voting, dividend, conversion, liquidation and other rights which could adversely affect the voting power and equity interest of the holders of common stock, which could be issued with the right to more than one vote per share, and could be utilized as a method of discouraging, delaying or preventing a change of control. The possible negative impact on takeover attempts could adversely affect the price of our common stock. Although we have no present intention to issue any shares of preferred stock other than the Series A Preferred Stock currently outstanding or to create any additional series of preferred stock, we may issue these shares in the future.

 

31

 

 

We have not paid dividends in the past and do not expect to pay dividends in the future on our common stock.

 

We have never paid cash dividends on our common stock and do not anticipate paying cash dividends in the foreseeable future. The payment of dividends on our common stock will depend on earnings, financial condition, and other business and economic factors affecting us at such time as our Board of Directors may consider relevant. If we do not pay dividends, our common stock may be less valuable because a return on a stockholders’ investment will only occur if our stock price appreciates. In addition, the holder of our outstanding shares of Series A Preferred Stock is entitled to certain dividends prior to payments of dividends to holders of common stock, which may be paid “in-kind” by the Company.

 

If securities analysts do not publish research or publish inaccurate or unfavorable research about our business, our stock price and trading volume could decline.

 

The trading market for our common stock depends in part on the research and reports that securities or industry analysts publish about us or our business. If one or more of the analysts who cover us downgrade our stock or publish inaccurate or unfavorable research about our business, our stock price would likely decline. If one or more of these analysts cease coverage of our company or fail to publish reports on us regularly, demand for our stock could decrease, which might cause our stock price and trading volume to decline.

 

If our estimates or judgments relating to our critical accounting policies prove to be incorrect, our operating results could be adversely affected.

 

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, as provided in “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in this Annual Report on Form 10-K. The results of these estimates form the basis for making judgments about the carrying values of assets, liabilities, and equity, and the amount of revenue and expenses that are not readily apparent from other sources. Significant assumptions and estimates used in preparing our consolidated financial statements include those related to revenue recognition, inventories, product warranty reserves, accounting for income taxes, and stock-based compensation expense. Our operating results may be adversely affected if our assumptions change or if actual circumstances differ from those in our assumptions, which could cause our operating results to fall below the expectations of securities analysts and investors, resulting in a decline in the price of our common stock.

 

Our issuance of common stock upon conversion of preferred stock or exercise of warrants or options may depress the price of our common stock.

 

As of March 16, 2020, we have issued and outstanding 33,128,620 shares of common stock, 49,626 shares of Series A Preferred Stock convertible into 4,962,600 shares of common stock, warrants to purchase 5,479,454 shares of common stock, and options to purchase 1,383,591 shares of common stock. The issuance of shares of common stock upon conversion of preferred stock, payment of accrued preferred dividends in-kind, or exercise of outstanding warrants or options could result in substantial dilution to our stockholders, which may have a negative effect on the price of our common stock.

 

The interests of the holder of our Series A Preferred Stock, which holds shares representing approximately 15% of the voting power of our stock and has the right to nominate and elect two directors to our Board of Directors, may conflict with the interests of our other stockholders.

  

On January 2, 2015, we entered into and closed a Series A Preferred Stock Purchase Agreement, pursuant to which we issued and sold to Intel Corporation (the “Series A Purchaser”) 49,626 shares of Series A Preferred Stock. Each share of Series A Preferred Stock is convertible into 100 shares of common stock and votes on an as-converted basis with the common stock. As of the date of this filing, the shares issuable upon conversion of the Series A Preferred Stock represent approximately 15% of the total voting power of our outstanding stock. The Series A Purchaser may vote these shares with respect to any matter submitted to stockholders for a vote. In addition, the Series A Purchaser is entitled to nominate and elect two additional directors to the Company’s Board of Directors (the “Board Election Right”), one of whom is required to qualify as an “independent” director, as that term is used in applicable exchange listing rules. The Series A Purchaser has not yet exercised the Board Election Right, but if it does so, the Series A Purchaser will have increased influence over matters considered by the Board of Directors. The Series A Purchaser may exercise its stockholder rights in a way that it believes is in its best interests, which may conflict with the interests of our other stockholders. Pursuant to a letter we received from the Series A Purchaser on November 10, 2016, the Series A Purchaser stated, among other things, that for the time being they would continue to refrain from designating any directors to the Vuzix Board of Directors and would not exercise its board observer rights and that the Company should not provide them with any board materials or correspondence.

 

32

 

 

The Series A Purchaser has notified us that it no longer desires to pursue a strategic relationship with us.

 

On November 10, 2016, we received a letter from the Series A Purchaser stating that it had been evaluating its alternatives with respect to its significant investment in and strategic relationship with us and that it has concluded that it no longer desires to pursue a strategic relationship with us. While the Series A Purchaser stated it had high regard for the Company’s team and its technology, the technology did not fit into its strategic plans. Furthermore, the Series A Purchaser added that it wanted to work with us to undertake an orderly disposition of its stock, subject to pricing and other conditions, that would minimize disruption in the markets, although it has not made any final decisions regarding its stock or the timing of a disposition. No further communications on this subject have occurred since then. Resale of such conversion shares by the Series A Purchaser may depress the price of our common stock.

 

Our stock price may be volatile in the future.

 

The trading price of our common stock has been subject to wide fluctuations in response to quarter-to-quarter variations in results of operations, announcements of technological innovations or new products by us or our competitors, general conditions in the wireless communications, semiconductor and display markets, changes in earnings estimates by analysts or other events or factors. In addition, the public stock markets recently have experienced extreme price and trading volatility. This volatility has significantly affected the market prices of securities of many technology companies for reasons frequently unrelated to the operating performance of the specific companies. These broad market fluctuations may adversely affect the market price of our common stock.

 

There is uncertainty regarding the exclusive forum clause in our amended and restated bylaws.

 

Our amended and restated bylaws include a clause that provides that the Court of Chancery of the State of Delaware will be the exclusive forum for certain types of actions that may be brought against us. There is uncertainty as to whether we would seek to, or whether we could successfully, apply this exclusive forum provision to any actions that may be brought against us under the Securities Act.

 

Item 1B. Unresolved Staff Comments

 

None.

 

Item 2. Properties

 

We lease approximately 39,000 square feet as our main facility at 25 Hendrix Road, West Henrietta (a suburb of Rochester), New York, 14586. This facility houses our office, R&D and manufacturing space under an operating lease for the facility that we began occupying in October 2015. The base rent contractual payment obligations under this operating lease is currently $538,000 per year. The lease has an original five-year term with an option by the Company to renew for two additional three-year terms at pre-agreed to lease rates. As of January 2020, we have given formal notice of our intent to exercise the first of the two renewal terms, extending our current lease expiration date to October 3, 2023. We believe that our Rochester facility is in good operating condition and currently adequately serves our needs.

  

In Oxford, England, we rent 400 square feet of office space at a cost of approximately $8,700 per year. We lease this location pursuant to a renewable one-year lease which is scheduled to expire on September 30, 2020.

 

In Tokyo, Japan, we rent 577 square feet of office space at a cost of approximately $71,000 per year. We lease this location pursuant to a renewable one-year lease which is scheduled to expire on February 28, 2021.

 

Item 3. Legal Proceedings

 

We are not currently involved in any actual or pending material legal proceedings or litigation, and we are not aware of any such proceedings contemplated by or against us or our property, except as follows:

 

On or about December 16, 2019, Throop, LLC (“Throop") filed a patent infringement lawsuit in the United States District Court for the Central District of California against the Company.  The complaint alleges that certain Vuzix products (which have yet to be sufficiently identified) infringe claims of U.S. Patent No. 7,035,897 and U.S. Patent No. 9,479,726.  Both patents expired on January 14, 2020.  The complaint purports to seek an injunction or payment of an ongoing royalty with respect to the patents, an award of damages to compensate for alleged past infringement, trebled damages, and an award of costs and attorney’s fees.  On March 6, 2020, before the Company filed a formal response to the complaint with the Court, Throop filed a voluntary dismissal without prejudice of the California complaint in response to the Company’s position that venue was improper. The Company denies that Throop is entitled to the relief requested and intends to vigorously defend itself against the claims asserted and any lawsuit related thereto brought against the Company going forward.

 

We were involved in the following litigation matters in 2019, which have been resolved:

 

On April 5, 2018, we filed a defamation lawsuit against Ricardo Antonio Pearson (a\k\a Richard Pearson) in the Supreme Court of the State of New York, County of New York. The Company’s complaint against Mr. Pearson alleged that he published false and defamatory articles about the Company. Vuzix sought damages in excess of $80 million, including punitive damages, and money damages. The lawsuit was moved from New York State Supreme Court, New York County, to the United States District Court, Southern District of New York, and Mr. Pearson filed a motion to dismiss the complaint for lack of jurisdiction, among other grounds. On or about November 8, 2019, the Court granted Mr. Pearson’s motion and dismissed the lawsuit on the basis that it lacked personal jurisdiction over him. In its decision, the Court noted that it was not making a determination or ruling on the actual merits of the lawsuit.

 

On or about October 27, 2018, Bob Glenn filed a shareholder derivative suit in the Supreme Court of the State of New York, County of Monroe against certain of the Company’s current and former directors and executive officers. The Company was named as a nominal defendant only. The complaint alleged breaches of fiduciary duty, unjust enrichment, and waste of corporate assets. The complaint also alleged that the Company and certain of its officers and directors made materially false and/or misleading statements and failed to disclose material adverse events about the Company’s business, operations and prospects in press releases and public filings. The complaint sought a declaration that the defendants breached and/or aided and abetted the breach of their fiduciary duties to the Company, determining and awarding damages, and directing the Company to reform and improve its corporate governance. Similar derivative suits were filed by Michael Washington and John Mayer on or about October 26, 2018 and October 29, 2018, and pursuant to the parties’ stipulation, the Court ordered the three lawsuits to be consolidated on January 29, 2019. Because the Company believed the allegations to be false and without merit, it filed a motion to dismiss the consolidated complaints on September 6, 2019. In response to the motion, the plaintiffs filed a consolidated amended complaint on October 3, 2019 in an attempt to bolster their allegations, but the causes of action remained substantially similar to those asserted in the original complaints. Because the Company found the claims in the consolidated amended complaint also to be baseless, it filed a motion to dismiss that pleading as well on November 4, 2019. Electing not to respond to the motion, the plaintiffs chose, instead, to voluntarily discontinue the action against the Company, and filed a stipulation to that effect with the Court on December 10, 2019. Accordingly, the Court marked the case disposed.

  

33

 

 

Item 4. Mine Safety Disclosures

 

Not applicable.

 

PART II

 

Item 5. Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Market for our Common Stock

 

Our common stock is listed on the NASDAQ Capital Market under the symbol “VUZI”. 

 

Company Stock Performance

 

The following graph shows a five-year comparison of cumulative total shareholder return for the Company, the NASDAQ US Benchmark TR Index and the S&P 500 Information Technology index. The graph assumes $100 was invested in each of the Company’s common stock, the NASDAQ Composite Index and the S&P 500 Information Technology index on December 31, 2014. Data points on the graph are annual. Note that historical price performance is not necessarily indicative of future performance.

 

34

 

 

 

Holders of Record

 

As of March 16, 2020, there were 45 holders of record of our common stock.

 

Dividends

 

We have not historically and currently do not pay dividends on our outstanding common stock. The declaration of any future dividends and, if declared, the amount of any such dividends, will be subject to our actual future earnings, capital requirements, regulatory restrictions, and applicable contractual restrictions and at the discretion of our Board of Directors. Our Board of Directors may take into account such matters as general business conditions, our financial condition and results of operations, our capital requirements, our prospects and such other factors as our Board of Directors may deem relevant.

 

Shares of Series A Preferred stock are entitled to receive dividends at a rate of 6% per year, compounded quarterly and payable in cash or in kind, at our discretion.

 

35

 

 

Issuer Purchases of Equity Securities

 

We did not purchase equity securities that are registered under Section 12 of the Exchange Act during the year ended December 31, 2019.

 

Unregistered Sales of Equity Securities and use of Proceeds

 

Sales of Unregistered Securities - None

 

Equity Compensation Plan Information

 

The following table provides information about our equity compensation plans as of December 31, 2019.

 

Plan Category  Number of
Securities to
be Issued
Upon Exercise
of Outstanding
Options,
Warrants and
Rights
  

Weighted
Average
Exercise Price
of
Outstanding
Options,

Warrants and
Rights

  

Number of
Securities
Remaining
Available for
Future Issuance

(1)

 
Equity compensation plans approved by security holders   1,383,591   $4.77    5,329,309 
Equity compensation plans not approved by security holders            
Total   1,383,591   $4.77    5,329,309 

 

(1) The amount appearing under “Number of securities remaining available for future issuance” includes shares available under our 2014 Equity Incentive Plan. The 2014 Plan (as amended) has an “evergreen provision”, under which the maximum number of shares of common stock that may be issued under the 2014 Plan automatically increases each time the Company issues additional shares of common stock so that the total number of shares issuable thereunder at all times equals 20% of the then outstanding shares of common stock, unless in any case the Board of Directors adopts a resolution providing that the number of shares issuable under the 2014 Plan not be so increased. Refer to Note 14 for further details.

  

Item 6. Selected Financial Data

 

We derived the selected consolidated statements of operations data for 2019, 2018 and 2017 and the selected consolidated balance sheet data as of December 31, 2019 and 2018 from our audited consolidated financial statements included elsewhere in this Annual Report on Form 10-K. The consolidated statements of operations data for 2016 and 2015, and the consolidated balance sheet data as of December 31, 2017, 2016 and 2015 are derived from consolidated financial statements that are not included in this Annual Report on Form 10-K. Our historical results are not necessarily indicative of the results that may be expected in the future. You should read this data together with our “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and the consolidated financial statements and related notes included elsewhere in this Annual Report on Form 10-K.

 

36

 

 

    For Years Ended December 31,  
    2019     2018     2017     2016     2015  
Sales of Products   $ 5,997,453     $ 7,692,102     $ 4,548,689     $ 1,987,878     $ 2,544,153  
Sales of Engineering Services     673,151       402,266       989,064       139,500       205,831  
                                         
Total Sales     6,670,604       8,094,368       5,537,753       2,127,378       2,749,984  
                                         
Cost of Sales — Products     10,906,992       6,072,476       5,269,900       3,251,906       2,101,466  
Cost of Sales — Engineering Services     171,733       253,610       944,451       39,060       82,332  
                                         
Total Cost of Sales     11,078,725       6,326,086       6,214,351       3,290,966       2,183,798  
                                         
Gross Profit (Loss)
(exclusive of depreciation shown separately below)
    (4,408,121     1,768,282       (676,598 )     (1,163,588 )     566,186  
Operating Expenses:                                        
Research and Development     8,900,837       10,378,728       6,706,690       6,947,878       3,595,437  
Selling and Marketing     4,215,611       4,822,639       3,694,913       3,394,580       1,798,041  
General and Administrative     6,600,092       6,973,238       6,126,335       5,114,139       6,120,101  
Depreciation and Amortization     2,441,581       1,469,664       998,528       770,668       380,841  
Impairment of Software Development Costs           196,223                    
Loss (Gain) on Inventory Valuation and Product Discontinuance           (211,416 )     1,151,482       1,124,401        
Impairment of Patents and Trademarks                       20,506       13,222  
                                         
Total Operating Expenses     22,158,121       23,629,076       18,677,948       17,372,172       11,907,642  
Loss from Operations     (26,566,242 )     (21,860,794 )     (19,354,546 )     (18,535,760 )     (11,341,456 )
                                         
Other Income (Expense)     89,872       (14,919 )     (278,956 )     (714,322 )     (2,086,022 )
                                         
Loss Before Provision for Income Taxes     (26,476,370 )     (21,875,713 )     (19,633,502 )     (19,250,082 )     (13,427,478 )
Provision for Income Taxes                              
                                         
Net Loss     (26,476,370 )     (21,875,713 )     (19,633,502 )     (19,250,082 )     (13,427,478 )
Preferred Stock Dividends     (1,931,860 )     (1,820,168 )     (1,714,934 )     (1,620,048 )     (1,514,081 )
Loss Attributable to Common Stockholders   $ (28,408,230 )   $ (23,695,881 )   $ (21,348,436 )   $ (20,870,130 )   $ (14,941,559 )
                                         
Basic and Diluted Loss per Share   $ (0.94 )   $ (0.87 )   $ (1.02 )   $ (1.23 )   $ (0.97 )
Weighted-average Shares Outstanding – Basic and Diluted     30,348,452       27,182,560       21,013,907       16,908,544       15,408,724  

 

    As of December 31,  
    2019     2018     2017     2016     2015  
Consolidated Balance Sheet Data:                                        
Cash, Cash Equivalents, and Marketable Securities   $ 10,606,091     $ 17,263,643     $ 14,889,636     $ 14,533,944     $ 11,877,058  
Working Capital     16,438,851       22,706,430       15,807,364       13,808,094       14,728,089  
Total Assets     28,446,465       35,133,640       26,833,253       22,345,260       19,562,629  
Total Long-Term Liabilities                 18,331       201,464       1,667,636  
Accumulated Deficit     (144,742,811 )     (118,266,441 )     (96,472,452 )     (76,838,950 )     (57,588,868 )
Total Stockholders’ Equity     24,240,443       30,456,975       21,379,713       17,721,837       16,092,871  

 

37

 

 

Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

The following discussion and analysis of financial condition and results of operations should be read in conjunction with our financial statements and related notes appearing elsewhere in this annual report. In addition to historical information, the following discussion and analysis includes forward looking statements that involve risks, uncertainties and assumptions. Our actual results and the timing of events could differ materially from those anticipated in these forward-looking statements as a result of a variety of factors, including those discussed in “Risk Factors” and elsewhere in this annual report. See the discussion under “Forward Looking Statements” beginning on page 1 of this annual report.

 

Overview

 

We are engaged in the design, manufacture, marketing and sale of augmented reality wearable display devices also referred to as head mounted displays (or HMDs, but also known as Video Eyewear or near-eye displays), in the form of Smart Glasses and Augmented Reality (AR) glasses. Our AR wearable display devices are worn like eyeglasses or attach to a head worn mount. These devices typically include cameras, sensors, and a computer that enable the user to view, record and interact with video and digital content, such as computer data, the Internet, social media or entertainment applications. Our wearable display products integrate micro-display technology with our advanced optics to produce compact high-resolution display engines, less than half an inch diagonally, which when viewed through our smart glasses products create virtual images that appear comparable in size to that of a computer monitor or a large-screen television.

 

With respect to our Smart Glasses and AR products, we are focused on the enterprise, industrial, commercial, and to a lesser degree the consumer markets. All of the mobile display and mobile electronics markets in which we compete have been subject to rapid technological change over the last decade including the rapid adoption of tablets, larger screen sizes and display resolutions along with declining prices on mobile phones and other computing devices, and as a result we must continue to improve our products’ performance and lower our costs. We believe our intellectual property portfolio gives us a leadership position in micro-display projection engines, waveguides, ergonomics, packaging, and optical systems.

 

Critical Accounting Policies and Significant Developments and Estimates

 

The discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements and related notes appearing elsewhere in this annual report. The preparation of these statements in conformity with generally accepted accounting principles requires the appropriate application of certain accounting policies, many of which require us to make estimates and assumptions about future events and their impact on amounts reported in our consolidated financial statements, including the statement of operations, balance sheet, cash flow and related notes. We continually evaluate our estimates used in the preparation of our consolidated financial statements, including those related to revenue recognition, bad debts, inventories, warranty reserves, product warranty, carrying value of long-lived assets, derivatives, valuation of stock compensation awards, and income taxes. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about carrying values of assets and liabilities that are not apparent from other sources. Since we cannot determine future events and their impact with certainty, the actual results may differ from our estimates. Such differences could be material to the consolidated financial statements.

 

We believe that our application of accounting policies, and the estimates inherently required therein, are reasonable. We periodically reevaluate these accounting policies and estimates and make adjustments when facts and circumstances dictate a change. Historically, we have found our application of accounting policies to be appropriate, and actual results have not differed materially from those determined using necessary estimates.

 

Our accounting policies are more fully described in the notes to our consolidated financial statements included in this annual report on Form 10-K. The critical accounting policies, judgments and estimates that we believe have the most significant effect on our financial statements are:

 

  · Valuation of inventories;
  · Carrying value of long-lived assets;
  · Going Concern

 

38

 

 

  · Software development costs;
  · Revenue recognition;
  · Product warranty;
  · Derivatives and fair value measurements;
  · Stock-based compensation; and
  · Income taxes.

 

Valuation of Inventories

 

Inventory is stated at the lower of cost or net realizable value, with cost determined on a weighted average first-in, first-out method. Inventory includes purchased parts and components, work in process and finished goods. Provisions for excess, obsolete or slow-moving inventory are recorded after periodic evaluation of historical sales, current economic trends, forecasted sales, estimated product life cycles and estimated inventory levels. Purchasing practices, electronic component obsolescence, accuracy of sales and production forecasts, introduction of new products, product life cycles, product support and foreign regulations governing hazardous materials are factors that contribute to inventory valuation risks. Exposure to inventory valuation risks is managed by maintaining safety stocks, minimum purchase lots, managing product and end-of-life issues brought on by aging components or new product introductions, and by utilizing certain inventory minimization strategies such as vendor-managed inventories. The accounting estimate related to valuation of inventories is considered a “critical accounting estimate” because it is susceptible to changes from period-to-period due to the requirement for management to make estimates relative to each of the underlying factors, ranging from purchasing to sales, production, and after-sale support. If actual demand, market conditions or product life cycles differ from estimates, inventory adjustments to lower market values would result in a reduction to the carrying value of inventory, an increase in inventory write-offs and a decrease to gross margins. The Company wrote down to net realizable value all of its component inventory parts related to its M300 and M300XL Smart Glasses products, resulting from the decision to end their production as they are at a disadvantaged selling position against our newer, improved M400 introduced in the fall of 2019. The total net realizable value write-down recorded at December 31, 2019 was $3,153,028. In addition, the Company recorded an additional obsolescence provision of $1,419,631 related to its legacy M300 finished goods on hand as of December 31, 2019. The write-down and provision totaled $4,572,659 for the year ended and as of December 31, 2019. These provisions were included in Cost of Sales on the Consolidated Statements of Operations.

 

Carrying Value of Long-Lived Assets

 

If facts and circumstances indicate that a long-lived asset, including a products’ mold tooling and equipment, may be impaired, the carrying value is reviewed in accordance with FASB ASC Topic 360-10 Accounting for the Impairment or Disposal of Long-Lived Assets. If this review indicates that the carrying value of the asset will not be recovered as determined based on projected undiscounted cash flows related to the asset over its remaining life, the carrying value of the asset is reduced to its estimated fair value. Impairment losses are dependent on a number of factors such as general economic trends and major technology advances, and thus could be significantly different than historical results. No impairment charges on tooling and equipment were recorded in 2019, 2018 or 2017.

 

We perform a valuation of our patents and trademark assets when events or circumstances indicate their carrying amounts may be unrecoverable. There was no impairment charge recorded in 2019, 2018 or 2017. The value of the remaining intellectual property, such as patents and trademarks, were valued (net of accumulated amortization) at $1,294,675 as of December 31, 2019, because management believes that its value is recoverable.

 

Software Development Costs

 

The Company capitalizes the costs of obtaining and developing its software once technological feasibility has been determined by management. Such costs are accumulated and capitalized. These projects could take several years to complete. The capitalized costs are then amortized over 3 to 5 years on a straight-line basis. Unsuccessful or discontinued software projects are written off and expensed in the fiscal period where the application is abandoned or discontinued. The unamortized software development costs remaining were valued (net of accumulated amortization) at $100,000 as of December 31, 2019, because management believes that its value is recoverable.

 

Revenue Recognition

 

The Company adopted the new guidance on Revenue from Contracts with Customers under FASB ASC Topic 606, “Revenue from Contracts with Customers”, as of January 1, 2018. Refer to Note 2 for further discussion on the impact of this adoption. Product sales represent the majority of the Company’s revenue. The Company recognizes revenue from these product sales as performance obligations are satisfied and transfer of control to the customer has occurred, typically upon physical shipment. Revenue is recognized in the amount that the Company expects to receive in exchange from the sale of our products. FOB shipping point is our standard shipping terms and revenue is recognized as our products ship to customers, as control is transferred at that point in time. All of our standard products sales include a 30-day money back guarantee and expected returns are estimated at each reporting period date and a portion of revenue is deferred for all estimated returns. As of December 31, 2019, deferred revenue associated with our expected returns was immaterial. The Company collects and remits sales taxes in certain jurisdictions and reports revenue net of any associated sales taxes.

 

39

 

 

Revenue from any engineering consulting and other services is recognized at the time the services are rendered. The Company accounts for its longer-term development contracts, which to date have all been firm fixed-priced contracts, on the percentage-of-completion method, whereby income is recognized as work on contracts progresses, but estimated losses on contracts in progress are charged to operations immediately. The percentage-of-completion is determined using the cost-to-cost method. To date, all such contracts have been less than one calendar year in duration.

  

Product Warranty

 

Warranty obligations are generally incurred in connection with the sale of our products. The warranty period for these products is generally one year except in certain European countries where it can be two years for some consumer-focused products. Warranty costs are accrued, to the extent that they are not recoverable from third-party manufacturers, for the estimated cost to repair or replace products for the balance of the warranty periods. We provide for the costs of expected future warranty claims at the time of product shipment or over-builds to cover replacements. The adequacy of the provision is assessed at each quarter end and is based on historical experience of warranty claims and costs. The costs incurred to provide for these warranty obligations are estimated and recorded as an accrued liability at the time of sale. Future warranty costs are estimated based on historical performance rates and related costs to repair given products. The accounting estimate related to product warranty is considered a “critical accounting estimate” because judgment is exercised in determining future estimated warranty costs. Should actual performance rates or repair costs differ from estimates, revision to the estimated warranty liability would be required.

 

40

 

 

Stock-Based Compensation Expense

 

Our Board of Directors approves grants of stock awards and options to employees to purchase our common stock. Stock-based compensation expense is recorded based upon the estimated fair value of the stock option or stock award at the date of grant. The Company uses the Black-Scholes Merton option pricing model to estimate the fair value of stock options granted pursuant to ASC Topic 718. The application of this pricing model involves assumptions that are judgmental and sensitive in the determination of compensation expense. The fair market value of our common stock on the date of each option grant is determined based on the most recent quoted sales price on our primary trading stock exchange, currently the NASDAQ Capital Market.

  

Income Taxes

 

We have historically incurred domestic operating losses from both a financial reporting and tax return standpoint. Accordingly, we provide deferred income tax assets and liabilities based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities based upon currently enacted tax laws. Any future recorded value of our deferred tax assets will be dependent upon our ability to generate taxable income in the jurisdictions in which we operate. These assets consist primarily of credit carry-forwards and net operating loss carry-forwards and the future tax effects of temporary differences between balances recorded for financial statement purposes and for tax return purposes. A valuation allowance is established for deferred tax assets in amounts for which realization is not considered more likely than not to occur. The accounting estimate related to income taxes is considered a “critical accounting estimate” because judgment is exercised in estimating future taxable income, including prudent and feasible tax planning strategies, and in assessing the need for any valuation allowance. To date, we have determined a 100% valuation allowance is required and accordingly no deferred tax asset has been reflected in our consolidated financial statements. In the event that it should be determined that all or part of a deferred tax asset in the future is more likely than not to be realized, an adjustment (reduction) of the valuation allowance would increase income to be recognized in the period such determination was made.

 

In addition, the calculation of our deferred taxes involves dealing with uncertainties in the application of complex tax regulations. As a result, we recognize liabilities for uncertain tax positions based on the two-step process prescribed within the interpretation. The first step is to evaluate the tax position for recognition by determining if the weight of available evidence indicates that it is more likely than not that the position will be sustained on audit, including resolution of related appeals or litigation processes, if any. The second step requires us to estimate and measure the tax benefit as the largest amount that is more than 50% likely of being realized upon ultimate settlement. It is inherently difficult and subjective to estimate such amounts, as this requires us to determine the probability of various possible outcomes. We re-evaluate these uncertain tax positions on a quarterly basis. This evaluation is based on factors including, but not limited to, changes in facts or circumstances, changes in tax law, effectively settled issues under audit and new audit activity. Such a change in recognition or measurement would result in the recognition of a tax benefit or an additional charge to the tax provision in the period. The Company currently has no uncertain tax positions.

 

Off-Balance Sheet Arrangements

 

We do not have any off-balance sheet arrangements that have, or are reasonably likely to have, an effect on our financial condition, financial statements, revenues or expenses.

 

41

 

 

Recent Accounting Pronouncements

 

Refer to Note 1

 

Results of Operations for Fiscal Years Ended December 31, 2019 and December 31, 2018

 

The following table compares the Company’s consolidated statements of operations data for the years ended December 31, 2019 and 2018.

 

   Years Ended December 31, 
   2019   2018   Dollar Change   % Increase (Decrease) 
Sales:                
Sales of Products  $5,997,453   $7,692,102   $(1,694,649)   (22)%
Sales of Engineering Services   673,151    402,266    270,885    67%
                     
Total Sales   6,670,604    8,094,368    (1,423,764)   (18)%
                     
Cost of Sales:                    
Cost of Sales - Products Sold   6,334,333    6,072,476    261,857    4%
Cost of Sales - Inventory Reserve for Obsolescence   4,572,659        4,572,659    NM 
Cost of Sales - Engineering Services   171,733    253,610    (81,877)   (32)%
                     
Total Cost of Sales   11,078,725    6,326,086    4,752,639    75%
                     
Gross Profit (Loss) (exclusive of depreciation shown separately below)   (4,408,121)   1,768,282    (6,176,403)   (349)%
Gross Profit (Loss) %   (66)%   22%          
                     
Operating Expenses:                    
 Research and Development   8,900,837    10,378,728    (1,477,891)   (14)%
 Selling and Marketing   4,215,611    4,822,639    (607,028)   (13)%
 General and Administrative   6,600,092    6,973,238    (373,146)   (5)%
 Depreciation and Amortization   2,441,581    1,469,664    971,917    66%
Impairment of Software Development Cost       196,223    (196,223)   (100)%
Loss (Gain) on Inventory Revaluation and Product Discontinuance       (211,416)   211,416    (100)%
                     
Loss from Operations   (26,566,242)   (21,860,794)   (4,705,448)   22%
                     
Other Income (Expense):                    
Investment Income   252,416    191,755    60,661    32%
Other Taxes   (110,269)   (57,917)   (52,352)   90%
Foreign Exchange Loss   (52,275)   (60,380)   8,105    (13)%
Loss on Asset Disposal       (55,172)   55,172    (100)%
Gain on Derivative Valuation       (13,873)   13,873    (100)%
Interest Expense       (19,332)   19,332    (100)%
                     
Total Other Income (Expense), Net   89,872    (14,919)   104,791    (702)%
                     
Net Loss  $(26,476,370)  $(21,875,713)  $(4,600,657)   21%

 

42

 

 

Sales.   There was an overall decrease in product sales for the year ended December 31, 2019 from those in 2018 of $1,694,649 or 22%. The following table reflects the major components of our sales:

 

   2019   % of Sales   2018   % of Sales   Dollar Change   % Increase (Decrease) 
Sales of Smart Glasses  $4,798,910    72%  $5,940,108    73%  $(1,141,198)   (19)%
Sales of OEM Products   951,570    14%   994,500    12%   (42,930)   (4)%
Sales of Video Eyewear       0%   452,460    6%   (452,460)   (100)%
Sales of Waveguides & Display Engines   152,499    2%   185,400    2%   (32,901)   (18)%
Sales Freight out   94,474    2%   119,634    2%   (25,160)   (21)%
Sales of Engineering Services   673,151    10%   402,266    5%   270,885    67%
Total Sales  $6,670,604    100%  $8,094,368    100%  $(1,423,764)   (18)%

  

Sales of Smart Glasses decreased to $4,798,910, or a 19% decline, as compared to 2018. The decrease was driven by reduced sales of our enterprise Smart Glasses products caused by (i) large deliveries of approximately $859,000 to AMA XpertEye Inc. in June 2018 and $573,000 to SATS Ltd. in September 2018 as compared to 2019 when we had no such large single customer shipments; (ii) price reductions in the third quarter of 30% and 33% on our existing Blade and M300XL products commencing in June 2019, respectively; (iii) with the launch of the M400 Early Adaptors Program (EAP),Vuzix customers received an M300XL upon initial order and payment and were shipped a M400 as they became available, both at a 28% reduced retail price; and (iv) customer order deferrals of follow-on orders while they await the production and delivery of the new and more powerful M400 Smart Glasses for Enterprise, which were first made available in late September 2019. Offsetting these decreases were sales of the new Blade Smart Glasses which represented approximately 38% of Smart Glasses revenues for the year ended December 31, 2019, despite a summer sale with a 30% reduced retail price for the months of July and August supplanted by a 20% price decrease for the balance of 2019. There were no sales of Video Eyewear in the 2019 period as the product was discontinued in September 2018. Sales of Waveguides and Display Engines for the year ended December 31, 2019 were $152,499 versus $185,400 in 2018. 

 

Sales of engineering services for the year ended December 31, 2019 increased $270,885 to $673,151 as compared to $402,266 in 2018. The revenue recognized in 2019 for engineering services was a result of two waveguide development projects which commenced in the second quarter of 2019 and were completed in the fourth quarter of 2019.

 

Cost of Sales and Gross Profit (Loss).  Cost of product revenues and engineering services are comprised of materials, components, labor, warranty costs, freight costs, manufacturing overhead, software royalties, and the non-cash amortization of software development costs related to the production of our products and rendering of engineering services. The following table reflects the components of our cost of goods sold for products:

 

43

 

 

Component of Cost of Sales  2019   As % Related
Product Sales
   2018   As % Related
Product Sales
   Dollar Change   % Increase
(Decrease)
 
Product Cost of Sales  $3,817,689    64%  $3,638,727    47%  $178,962    5%
Freight Costs   666,115    11%   719,062    9%   (52,947)   (7)%
Manufacturing Overhead   1,744,517    29%   1,176,681    15%   567,836    48%
Warranty Costs   (119,154)   -2%   295,924    4%   (415,078)   (140)%
Amortization of Software Development Costs   100,000    2%   100,000    1%       0%
Software Royalties   125,166    2%   142,082    2%   (16,914)   (12)%
                               
Total Cost of Sales - Products Sold  $6,334,333    106%  $6,072,476    79%  $261,857    4%
                               
Gross Profit (Loss) – Before Reserve for Obsolescence  $(336,880)   (6)%  $1,619,626    21%  $(1,956,506)   (121)%
                               
Cost of Sales - Inventory Reserve for Obsolescence   4,572,659     NM         NM    4,572,659     NM 
                               
Gross Profit (Loss) - Products Total  $(4,909,539)       $1,619,626        $(6,529,167)   (403)%
                               
Gross Profit - Engineering Services   501,418         148,656         352,762    237%
                               
Total Gross Profit (Loss)  $(4,408,121)       $1,768,282        $(6,176,403)   (349)%

 

For the year ended December 31, 2019, we reported an overall gross loss from product sales, before inventory obsolescence, of $336,880 as compared to a gross profit of $1,619,626 in the prior year. On a product cost of sales basis only, product direct costs were 64% of sales in the 2019 period as compared to 47% in 2018, the increase resulting from: (i) a 33% standalone retail price reduction on the M300XL commencing in the summer of 2019; (ii) lower margins of approximately 60% on our M300XLs that shipped in the third quarter under our M400 EAP launch; (iii) a 30% summer price reduction and a 20% fall price reduction in the retail price of the Blade; and (iv) lower gross margins earned on the M400 smart glasses included in the M400 EAP program over their normal standalone sales price. Manufacturing overhead costs for 2019, as a percentage of total product sales, increased to 29% for 2019 from 15% in 2018, as we have increased our production floor and warehouse space which we first occupied in November 2018, including related personnel, in anticipation of increased Blade manufacturing and the commencement in late September 2019 of M400 production at our Rochester facility. There was a negative warranty expense, or gain, of $119,154 for the year ended December 31, 2019. This warranty cost reduction resulted from the following contributing factors: (i) lower product sales volume in 2019 versus 2018, and (ii) lower warranty returns realized against previously provisioned amounts.

 

In addition to its normal Reserve for Obsolescence provision, (i) the Company wrote down to net realizable value all of its component inventory parts related to its M300 and M300XL Smart Glasses products, resulting from the decision to end their production as they are at a disadvantaged selling position against our newer, improved M400 introduced in the fall of 2019. The total net realizable value write-down recorded at December 31, 2019 was $3,153,028, and (ii) the Company recorded an additional obsolescence provision of $1,419,631 related to its legacy M300 finished goods on hand as of December 31, 2019. The write-down and obsolescence provision totaled $4,572,659 for the year ended and as of December 31, 2019. These provisions were included in Cost of Sales on the Consolidated Statements of Operations.

 

Costs for engineering services for the year ended December 31, 2019 were $171,733 as compared to $253,610 in 2019. The majority of the 2019 period amounts represented the reclassification of our internal R&D wage costs associated with two waveguide development projects. There was a gross profit of $501,418 from engineering services for 2019 versus $148,656 in the 2018. 

 

Research and Development.   Our research and development expenses consist primarily of compensation costs for personnel, related stock-based compensation expenses, third-party services, purchase of research supplies and materials, and consulting fees related to research and development. Software development expenses to determine technical feasibility before final development and ongoing maintenance are not capitalized and are included in research and development costs.

 

   2019   % of
Sales
   2018   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
Research and Development  $8,900,837    133%  $10,378,728    128%  $(1,477,891)   (14)%

 

Research and development costs for the year ended December 31, 2019 decreased by $1,477,891 or 14% as compared to 2018. There was a decrease of $1,424,785 in external consulting fees relating to our Blade product in 2018 when this was still in active development; a decrease of $98,124 in equipment rental and supplies; a decrease in travel expenses of $95,165; and a decrease in hiring expenses of $71,177, offset by increases in salary, benefits and stock-based compensation expenses of $186,388 (net of $100,000 re-classified to cost of engineering sales) due to new personnel additions which primarily took place in the second half of 2018; and an increase of $69,146 in rent expense as we expanded our office, R&D and manufacturing facilities by 10,000 square feet in November 2018.

 

44

 

 

Selling and Marketing.    Selling and marketing costs consist of trade show costs, advertising, sales samples, travel costs, sales staff compensation costs including stock-based compensation expense, consulting fees, public relations agency fees, website costs and sales commissions paid to full-time staff and outside consultants.

 

   2019   % of
Sales
   2018   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
Selling and Marketing  $4,215,611    63%  $4,822,639    60%  $(607,028)   (13)%

 

Selling and marketing costs for the year ended December 31, 2019 decreased by $607,028 or 13% as compared to 2018. This decrease in costs were due to the following factors: a decrease in advertising and trade shows of $389,602; a $259,333 decrease in salary and stock-based compensation; a $87,940 decrease in travel related expenses; partially offset by a $101,285 increase in commissions largely due to commissions payable to TDG pursuant to our non-compete agreement amendment (as described in Note 8 of the financial statements).

 

General and Administrative.   General and administrative costs include professional fees, investor relations (IR) costs including at times shares issued for IR services, salaries and related stock compensation, travel costs, office and rental costs.

  

   2019   % of Sales   2018   % of Sales   Dollar Change   % Increase (Decrease) 
General and Administrative  $6,600,092    99%  $6,973,238    86%  $(373,146)   (5)%

 

 

General and administrative costs decreased by 5% or $373,146 for the year ended December 31, 2019 as compared to 2018 primarily because of a decrease in salary, commissions, benefits and stock compensation expenses of $952,043 related to staff reductions; a decrease in travel expenses of $69,214; and a decrease in bad debt related expenses of $22,607; offset by an increase in IR and shareholder related expenses of $201,870; an increase in legal expenses of $185,387; an increase in IT and security assessment consulting fees of $150,000; an increase in computer and software related expenses of $87,126; and an increase in insurance premiums of $55,538.

 

Depreciation and Amortization. Depreciation and amortization expense for the year ended December 31, 2019 was $2,441,581, as compared to $1,469,664 in 2018, an increase of $971,917. The increase in depreciation expense is due to new investments in depreciable assets, including manufacturing equipment and molds placed into service from construction in progress and recent leasehold improvements with our plant expansion which occurred in Q4-2018 and Q1-2019. Amortization expense of the intangible asset related to the non-compete TDG Amendment was $408,000 versus $102,000 in 2018.

 

Other Income (Expense), Net.   Total other income was $89,872 for the year ended December 31, 2019 as compared to an expense of $14,919 in 2018. The overall improvement of $104,791 in other income and expenses was primarily the result of an increase of $60,661 in investment interest income; nil in asset disposal losses in 2019 versus $55,172 in 2018; a decreased loss of $13,873 in derivative valuation for the year ended December 31, 2019 as compared to 2018; and partially offset by an increase of $52,352 in other capital and branch taxes.

 

Provision for Income Taxes.  There were no provisions for income taxes in 2019 or 2018.

 

45

 

 

 

Results of Operations for Fiscal Years Ended December 31, 2018 and December 31, 2017

 

The following table compares the Company’s consolidated statements of operations data for the years ended December 31, 2018 and 2017.

 

   Years Ended December 31, 
   2018   2017   Dollar
Change
   % Increase
(Decrease)
 
Sales:                    
Sales of Products  $7,692,102   $4,548,689   $3,143,413    69%
Sales of Engineering Services   402,266    989,064    (586,798)   (59)%
                     
Total Sales   8,094,368    5,537,753    2,556,615    46%
                     
Cost of Sales:                    
Cost of Sales - Products   6,072,476    5,269,900    802,576    15%
Cost of Sales - Engineering Services   253,610    944,451    (690,841)   (73)%
                     
Total Cost of Sales   6,326,086    6,214,351    111,735    2%
                     
Gross Profit (Loss) (exclusive of depreciation shown separately below)   1,768,282    (676,598)   2,444,880    (361)%
Gross Profit (Loss) %   22%   (12)%          
                     
Operating Expenses:                    
Research and Development   10,378,728    6,706,690    3,672,038    55%
Selling and Marketing   4,822,639    3,694,913    1,127,726    31%
General and Administrative   6,973,238    6,126,335    846,903    14%
Depreciation and Amortization   1,469,664    998,528    471,136    47%
Impairment of Software Development Cost   196,223        196,223    NM 
(Gain) Loss on Inventory Revaluation and Product Discontinuance   (211,416)   1,151,482    (1,362,898)   (118)%
                     
Loss from Operations   (21,860,794)   (19,354,546)   (2,506,248)   13%
                     
Other Income (Expense):                    
Investment Income   191,755    58,530    133,225    228%
Other Taxes   (57,917)   (28,363)   (29,554)   104%
Foreign Exchange (Loss) Gain   (60,380)   (65,248)   4,868    (7)%
Loss on asset disposal   (55,172)   (585)   (54,587)   NM 
(Loss) Gain on Derivative Valuation   (13,873)   20,204    (34,077)   (169)%
Amortization of Term Debt Discount and Deferred Issuance Costs       (175,260)   175,260    (100)%
Interest Expense   (19,332)   (88,234)   68,902    (78)%
                     
Total Other Income (Expense)   (14,919)   (278,956)   264,037    (95)%
                     
Loss Before Provision for Income Taxes   (21,875,713)   (19,633,502)   (2,242,211)   11%
Provision for Income Taxes               0%
                     
Net Loss  $(21,875,713)  $(19,633,502)  $(2,242,211)   11%

 

46

 

 

Sales.    There was an overall increase in product sales for the year ended December 31, 2018 over the same period in 2017 of $3,143,413 or 69%. The following table reflects the major components of our sales:

 

   2018   % of
Sales
   2017   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
Sales of Smart Glasses  $5,940,108    73%  $3,840,300    69%  $2,099,808    55%
Sales of OEM Products   994,500    12%       0%   994,500    NM 
Sales of Video Eyewear   452,460    6%   296,752    6%   155,708    52%
Sales of Waveguides   185,400    2%   351,056    6%   (165,656)   (47)%
Sales Freight out   119,634    2%   60,581    1%   59,053    97%
Sales of Engineering Services   402,266    5%   989,064    18%   (586,798)   (59)%
Total Sales  $8,094,368    100%  $5,537,753    100%  $2,556,615    46%

  

The overall increase in total sales was primarily the result of stronger smart glasses sales, primarily our M300, sales of which for the year ended December 31, 2018 were $5,940,108 as compared to $3,840,300 in the same period in 2017, a 55% increase. Sales of our OEM products under the Toshiba Supply Agreement were $994,500 in the year ended December 31, 2018 as compared to nil in the same period in 2017. Our iWear Video Headphones sales rose 52% in the year ended December 31, 2018 as compared to the same period in 2017. Production of this product was discontinued as of September 30, 2018 and all remaining stock was sold in the fourth quarter of 2018. Sales of Waveguides for the year ended December 31, 2018 were $185,400 versus $351,056 in the same period in 2017.

 

Sales of engineering services for the year ended December 31, 2018 decreased to $402,266 from $989,064 in the comparable 2017 period. The 2017 period’s revenue was comprised primarily of the amounts billed to Toshiba under our development agreement with them and when the development program was active. This Toshiba program was completed in March 2018.

 

Cost of Sales and Gross Profit (Loss).  Cost of product revenues and engineering services are comprised of materials, components, labor, warranty costs, freight costs, manufacturing overhead, software royalties, and the non-cash amortization of software development costs related to the production of our products and rendering of engineering services. The following table reflects the components of our cost of goods sold for products:

 

47

 

 

Component of Cost of

Sales - Products

  2018  

As %

Related
Product

Sales

   2017  

As %

Related
Product

Sales

   Dollar
Change
  

% Increase

(Decrease)

 
Product Cost of Sales  $3,638,727    47%  $3,152,729    69%  $485,998    15%
Freight Costs   719,062    9%   610,228    13%   108,834    18%
Manufacturing Overhead   1,176,681    15%   886,593    19%   290,088    33%
Warranty Costs   295,924    4%   283,402    6%   12,522    4%
Amortization of Software Development Costs   100,000    1%   214,838    5%   (114,838)   (53)%
Software Royalties   142,082    2%   122,111    3%   19,971    16%
                               
Total Cost of Sales - Products  $6,072,476    78%  $5,269,900    116%  $802,576    15%
                               
Gross Profit (Loss) - Product Sales  $1,619,626    22%  $(721,211)   (16)%  $2,340,837    (325)%

 

For the year ended December 31, 2018, we reported an overall gross profit from product sales of $1,619,626 as compared to a gross loss of $721,211 in the prior year’s period. On a product cost of sales basis only, product direct costs decreased to 47% of sales versus 69% in the prior year’s period when we recorded inventory obsolescence provisions of $473,324 related to initial M300 volume production issues and the move from our contract manufacturer’s California site to their China facility in spring 2017. Manufacturing overhead costs rose by 33% primarily due to staff additions as part of the commencement of Blade production in Rochester, NY, as opposed to offshore where our other smart glasses products are assembled. As a percentage of total product sales, manufacturing overhead costs declined to 15% for the 2018 period from 33% in the 2017 period.

 

Costs for engineering services for the year ended December 31, 2018 was $253,610 as compared to $944,451 in the prior 2017 period. These amounts represent direct project costs as well as the reclassification of internal research and development wage costs related to the Toshiba engineering program which was completed in March 2018. We earned a gross profit of $148,656 for the year ended December 31, 2018, versus a gross profit from engineering services of $44,613 in the same period in 2017.

 

Research and Development.   Our research and development expenses consist primarily of compensation costs for personnel, related stock-based compensation expenses, third-party services, purchase of research supplies and materials, and consulting fees related to research and development. Software development expenses to determine technical feasibility before final development and ongoing maintenance are not capitalized and are included in research and development costs.

  

   2018   % of
Sales
   2017   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
Research and Development  $10,378,728    128%  $6,706,690    121%  $3,672,038    55%

 

Comparing our research and development costs for the year ended December 31, 2018 versus the same period in 2017: there was an increase in 2018 salary, benefits and stock-based compensation expenses of $1,761,178, primarily the result of additional R&D staff versus the same period in 2017; increased research supplies costs of $136,120 and increased consulting and contractor fees of $1,622,212, both primarily related to software development services for our Blade Smart Glasses; a $94,813 increase in travel costs; and a $75,609 increase in hiring expenses.

 

Selling and Marketing.    Selling and marketing costs consist of trade show costs, advertising, sales samples, travel costs, sales staff compensation costs including stock-based compensation expense, consulting fees, public relations agency fees, website costs and sales commissions paid to full-time staff and outside consultants.

 

   2018   % of
Sales
   2017   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
Selling and Marketing  $4,822,639    60%  $3,694,913    67%  $1,127,726    31%

 

48

 

 

These costs increased overall as compared to the same period in 2017 primarily due to the following factors: a $251,339 increase in salary, separation payments, commissions, benefits and stock-based compensation expenses; an increase of $350,629 in our app store and website related costs; an increase of $163,509 in consulting fees; an increase of $243,651 in advertising, marketing and trade show costs; and an increase of $93,691 in travel costs.

 

General and Administrative.   General and administrative costs include professional fees, investor relations (IR) costs including shares and warrants issued for IR services, salaries and related stock compensation, travel costs, office and rental costs.

  

   2018   % of
Sales
   2017   % of
Sales
   Dollar
Change
   % Increase
(Decrease)
 
General and Administrative  $6,973,238    86%  $6,126,335    111%  $846,903    14%

 

General and administrative costs rose by 14% or $846,903 for the year ended December 31, 2018 versus the 2017 period primarily because of: increased salary, separation and stock compensation costs of $960,100 due to the hiring of new staff as compared to the prior year’s period and separation costs related to the Company’s former COO; an increase of $210,862 in legal fees; an increase in travel expenses of $106,174; and increased bank, website, insurance, and office equipment and supplies totaling $245,435; a $650,372 decrease in external IR and shareholder related costs; and a $55,393 decrease in audit and SOX consultancy costs from the 2017 period when we had been making significant investments in these areas.

 

Depreciation and Amortization.   Depreciation and amortization expense for the year ended December 31, 2018 was $1,469,664 as compared to $998,528 in the same period in 2017, an increase of $471,136. The increase in depreciation and amortization expense is due to new investments in depreciable assets and investment in an intangible asset (Note 9).

 

(Gain) Loss on Inventory Revaluation and Product Discontinuance. There was a gain on inventory valuation for the year ended December 31, 2018 of $211,416 as compared to a loss of $1,151,482 in the same period in 2017. The 2017 loss write-down was the result of management’s decision to further reduce the suggested retail selling price of our iWear Video Eyewear inventory on hand and the remaining contracted production to a price below the product’s then current carrying cost. The 2018 gain was the result of improved net production yields and other lower discontinuance costs over the prior 2017 estimates that were realized when production of this product was completely discontinued in September 2018. 

 

Other Income (Expense).  Total other expense was $14,919 for the year ended December 31, 2018 as compared to an expense of $278,956 in the same period in 2017. The overall decrease of $264,037 in these other expenses was primarily the result of having $-0- expense for the amortization of senior term debt discounts and deferred financing costs for the year ended December 31, 2018 as compared to a 2017 expense of $175,260 and a related reduction in interest expense of $68,902 due to the conversions and maturity of the debt on June 3, 2017. Other items reducing the impact of preceding costs savings were a $34,077 increased loss on the derivative valuation, $54,587 loss on asset disposals and abandonment, and a $133,225 increase in investment income.

 

Provision for Income Taxes.  There were no provisions for income taxes in 2018 or 2017. 

 

Liquidity and Capital Resources

 

As of December 31, 2019, we had cash and cash equivalents of $10,606,091, a decrease of $6,657,552 from $17,263,643 as of December 31, 2018.

 

As of December 31, 2019, we had current assets of $19,073,508 as compared to current liabilities of $2,634,657 which resulted in a positive working capital position of $16,438,851. At December 31, 2018, we had a working capital position of $22,706,430. Our current liabilities are comprised principally of accounts payable, operating lease liabilities and accrued expenses.

 

For the year ended December 31, 2019, we used $22,355,020 of cash for operating activities which includes (i) a net loss of $26,476,370, partially offset by non-cash expenses totaling $8,612,597, (ii) $2,998,724 for net purchases and consumption of component inventory as we ramped up for volume production of our Blade and M400 product lines, (iii) $1,605,456 paydown of trade payables that existed as of December 31, 2018, and (iv) $599,577 decrease in accounts receivable, partially offset by $512,680 in consumption of advanced vendor prepayments in our Blade and M400 production. For the year ended December 31, 2018, we used $22,542,574 of cash for operating activities.

 

During the year ended December 31, 2019, we used $3,157,539 of cash for investing activities, which includes (i) $1,898,771 for purchase of manufacturing equipment, product mold tooling, and computer equipment primarily related to new waveguide manufacturing equipment, (ii) $758,464 in license and other intangible asset costs that were capitalized, $750,000 of which was the two final payments required under our TDG non-compete amendment, and (iii) $250,000 for the issuance of a convertible promissory note with a confidential strategic business partner. For the year ended December 31, 2018, we used $3,147,794 of cash for investing activities.

 

49

 

 

During the year ended December 31, 2019, we generated $18,855,007 in cash from financing activities from the sale of equity securities on July 2, 2019. Gross proceeds from this equity sale were $20,000,007 and direct issuance costs were $1,145,000. For the year ended December 31, 2018, we generated $28,064,375 in cash from financing activities from the sale of equity securities.

 

As of December 31, 2019, the Company does not have any current or long-term debt obligations outstanding.

 

We incurred annual net losses of $26,476,370, $21,875,713, and $19,633,502 for the years ended December 31, 2019, 2018 and 2017, respectively. The Company has an accumulated deficit of $144,742,811 as of December 31, 2019.

 

Historically, the Company has met its cash needs primarily by the sale of equity securities. On July 1, 2019, the Company entered into a securities purchase agreement with certain purchasers for the sale of an aggregate of 5,479,454 shares of the Company’s common stock along with warrants to purchase an aggregate of up to 5,479,454 additional shares of common stock, in a registered direct offering at a combined purchase price of $3.65 per share and warrant for aggregate gross proceeds of $20,000,007. The purchase agreement closed on July 2, 2019. The Company received net proceeds of $18,855,007 after issuance costs and expenses. The warrants sold in the offering are exercisable for a period of two years commencing six months from the issuance date at an exercise price of $4.10 per share.

 

The Company needs to grow its business significantly to become profitable and self-sustaining on a cash flow basis or it will be required to raise new equity and/or debt capital. Our cash requirements related to funding operating losses depend on numerous factors, including new product development activities, our ability to commercialize our products, our products’ timely market acceptance, selling prices and gross margins, and other factors. The Company’s management intends to take actions necessary to continue as a going concern, and accordingly, our consolidated financial statements included in this report have been prepared assuming that we will continue as a going concern. This basis of accounting contemplates the recovery of our assets and the satisfaction of liabilities in the normal course of business. The consolidated financial statements included in this report do not include any adjustments to the specific amounts and classifications of assets and liabilities which might be necessary should we be unable to continue as a going concern.

 

Management’s plans concerning these matters and managing our liquidity include, among other things:

 

  · the continued sale of our existing M300XL finished goods and Blade component inventory, of which we have significant levels;
     
  · the expected success of our third-generation monocular device for enterprise, the M400 Smart Glasses. This product entered mass production near the end of the third quarter of 2019, and to date customer interest and adoption of the M400 has been more rapid than earlier models;
     
  · the commencement of volume manufacturing and sale of the new Vuzix Smart Swim product in the second quarter of 2020;
     
  · the timely sale and disposal of as many products and components as possible included in our write-down losses on the M300 Smart Glasses and excess components related to the cessation of production of it and the M300-C Smart Glasses in China. Management intends to seek to recover some cash from the $4,572,659 of inventory reserved for in the year ended December 31, 2019;
     
  · increase our efforts to further promote our engineering services programs, which result in overall larger gross margins by absorbing some of our operating costs by utilizing a significant portion of our internal engineering fixed salary costs;
     
  · continue to pursue licensing and strategic opportunities around our waveguide technologies with potential OEMs, which would include the receipt of upfront licensing fees and supply agreements;
     
  · greater control of operating costs and reductions in spending growth rates wherever possible;
     
  · decrease tradeshow and external PR expenditures;
     
  · right-size operations across all areas of the Company, including head-count and salary freezes and overall spending;
     
  · delay or curtail discretionary and non-essential capital expenditures not related to near-term new products;
     
  · reduce the rate of new product introductions and leverage existing platforms to reduce new product development and engineering costs;
     
  · the introduction of the M4000 in late Q2-2020 will be the Company’s next generation see-through waveguide-based product specifically designed for the enterprise market; and
     
  · further reduce the rate of research and development spending on new technologies, particularly the use of external contractors.

 

Historically, the Company has met its cash needs primarily through the sale of equity securities.

 

If the Company raises additional funds by new equity issuances, the ownership interests of existing shareholders may be diluted. The amount of such dilution could increase due to the issuance of new warrants or securities with other dilutive characteristics, such as full ratchet anti-dilution clauses or price resets.

 

However, there can be no assurance that we will be able to raise capital in the future or that if we raise additional capital it will be sufficient to execute on our business plan. To the extent that we are unable to raise sufficient additional capital, we will be required to substantially modify our business plan and our plans for operations, which could have a material adverse effect on us and our financial condition.

  

50

 

 

Contractual Obligations

 

The following is a summary of our contractual payment obligations for operating leases as of December 31, 2019:

 

Contractual Obligations  Total   Less than
1 Year
   1-3 Years   3-5 Years   More than
5 Years
 
Operating Lease Obligations  $2,284,579   $608,698   $1,675,881         
Open Purchase Obligations   4,700,000    4,700,000             

 

Item 7A. Quantitative and Qualitative Disclosures about Market Risk.

 

We invest our excess cash in short-term highly rated corporate debt instruments or commercial paper, which bear lower levels of relative risk. We believe that the effect, if any, of reasonably possible near-term changes in interest rates on our financial position, results of operations and cash flows should not be material to our cash flows or income. It is possible that interest rate movements would increase our unrecognized gain or loss on interest rate securities. Our portfolio of marketable debt securities is subject to interest rate risk although our intent is to hold securities until maturity. The credit rating of our investments may be affected by the underlying financial health of the guarantors of our investments. Our investment policy generally directs our investment managers to select investments to achieve the following goals: principal preservation, adequate liquidity, and return.

 

We are exposed to changes in foreign currency exchange rates primarily through the translation of our foreign subsidiary’s financial positions, results of operations, and transaction gains and losses as a result of non-U.S. dollar denominated cash flows related to business activities in Asia and the United Kingdom, and remeasurement of U.S. dollars to the functional currency of our foreign subsidiaries. We are also exposed to the effects of exchange rates in the purchase of certain raw materials whose price is in U.S. dollars but the price on future purchases is subject to change based on the relationship of the Japanese Yen to the U.S. Dollar. We do not currently hedge our foreign currency exchange rate risk. We estimate that any market risk associated with our international operations is unlikely to have a material adverse effect on our business, financial condition or results of operation.

 

Item 8. Financial Statements and Supplementary Data

 

The information required by this item is incorporated herein by reference to pages F-1 through F-29 of this annual report and is indexed under Item 15(a)(1) and (2).

 

Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

 

None.

 

Item 9A. Controls and Procedures

 

The information contained in this section covers management’s evaluation of our disclosure controls and procedures and our assessment of our internal control over financial reporting as of December 31, 2019.

 

  (a) Evaluation of Disclosure Controls and Procedures

 

Our management, including our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our disclosure controls and procedures as of the end of the period covered by this annual report as required by Rule 13a-15 under the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Disclosure controls and procedures are those controls and other procedures that are designed to ensure that information required to be disclosed in reports filed or submitted under the Exchange Act is properly recorded, processed, summarized, and reported, within the time periods specified by the rules and forms promulgated by the SEC. Disclosure controls and procedures include, without limitation, controls and procedures designed to ensure that such information is properly accumulated and communicated to management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow timely decisions regarding required disclosure. As a result of this evaluation, our Chief Executive Officer and Chief Financial Officer concluded that as of December 31, 2019, our disclosure controls and procedures were effective.

  

51

 

 

  (b) Management’s Annual Report on Internal Control Over Financial Reporting

 

Our management is responsible for establishing and maintaining adequate “internal control over financial reporting,” as defined in Rule 13a-15(f) and 15d-15(f) under the Exchange Act. Our system of internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of consolidated financial statements for external reporting purposes in accordance with US GAAP.

 

Our internal control over financial reporting includes those policies and procedures that: (a) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (b) provide reasonable assurance that transactions are recorded as necessary to permit preparation of consolidated financial statements in accordance with US GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and directors; and (c) provide reasonable assurance regarding prevention or timely detection of unauthorized use, acquisition, or disposition of our assets that could have a material effect on the consolidated financial statements.

 

Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, evaluated the effectiveness of our internal control over financial reporting as of December 31, 2019, and they concluded that our internal control over financial reporting was effective as of December 31, 2019. In making this assessment, we utilized the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control — Integrated Framework (2013).

 

The company’s independent registered public accounting firm, Freed Maxick CPAs, P.C., who audited the consolidated financial statements included in this Annual Report on Form 10-K, has issued an attestation report on the effectiveness of the management’s internal control over financial reporting as of December 31, 2019. This report states that the internal control over financial reporting was effective and appears on page F-2 of this Annual Report on Form 10-K.

 

  (c) Limitations on the Effectiveness of Controls.

 

Because of its inherent limitations, internal control over financial reporting, no matter how well-conceived or operated, can only provide reasonable assurance, not absolute assurance, that the objectives of the control system are met. Such controls may not prevent or detect every misstatement. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

  (d) Change in Internal Control Over Financial Reporting

  

There was no change in our internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) during the three months ended December 31, 2019 that has materially affected, or is likely to materially affect, our internal control over financial reporting.

 

52

 

 

Item 9B. Other Information

 

None.

 

PART III

 

Item 10. Directors, Executive Officers and Corporate Governance

 

The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto.

 

Item 11. Executive Compensation

 

The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto, except, however, the section entitled “Compensation Committee Report” shall not be deemed to be “soliciting material” or to be filed with the Securities and Exchange Commission or subject to Regulation 14A or 14C, or to the liabilities of Section 18 of the Exchange Act of 1934, as amended.

 

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

 

The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto.

 

Item 13. Certain Relationships and Related Transactions, and Director Independence

 

The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto.

 

Item 14. Principal Accounting Fees and Services

 

The information required by this item will be presented in our definitive proxy statement not later than 120 days after the end of the fiscal year covered by this annual report and is incorporated in this annual report by reference thereto.

 

53

 

 

PART IV

 

Item 15. Exhibits and Financial Statement Schedules

 

  (a) The following documents are filed as part of this report

 

(1) Financial Statements

 

    Page 
Report of Independent Registered Public Accounting Firm   F-2 
Consolidated Balance Sheets — As of December 31, 2019 and 2018   F-3 
Consolidated Statements of Changes In Stockholders’ Equity — For The Years Ended December 31, 2019, 2018 and 2017   F-4 
Consolidated Statements of Operations — For the Years Ended December 31, 2019, 2018 and 2017   F-5 
Consolidated Statements of Cash Flows — For the Years Ended December 31, 2019, 2018 and 2017   F-6 
Notes to Consolidated Financial Statements   F-7 

  

(2) Financial Statement Schedules

 

Schedule II – Valuation and Qualifying Accounts

 

Schedules other than the one listed above have been omitted because of the absence of conditions under which they are required or because the required information is included in the consolidated financial statements or the notes thereto.

 

(3) Exhibits

 

A list of exhibits filed with this annual report is set forth in the Exhibit Index and is incorporated in this Item 15(a)(3) by reference.

 

54

 

 

VUZIX CORPORATION

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

 

    Page 
Report of Independent Registered Public Accounting Firm   F-2 
Consolidated Balance Sheets — As of December 31, 2019 and 2018   F-3 
Consolidated Statements of Changes In Stockholders’ Equity — For The Years Ended December 31, 2019, 2018 and 2017   F-4 
Consolidated Statements of Operations — For the Years Ended December 31, 2019, 2018 and 2017   F-5 
Consolidated Statements of Cash Flows — For the Years Ended December 31, 2019, 2018 and 2017   F-6 
Notes to Consolidated Financial Statements   F-7 

 

F-1

 

 

Report of Independent Registered Public Accounting Firm

 

Board of Directors and Stockholders

Vuzix Corporation

Rochester, New York

 

Opinions on the Financial Statements and Internal Control Over Financial Reporting

We have audited the accompanying consolidated balance sheets of Vuzix Corporation and subsidiary (the Company) as of December 31, 2019 and 2018, and the related consolidated statements of changes in stockholders' equity, operations, and cash flows for each of the three years in the period ended December 31, 2019, and the related notes and schedules (collectively, the financial statements). We also have audited the Company’s internal control over financial reporting as of December 31, 2019, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013.

 

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of the Company as of December 31, 2019 and 2018, and the results of its operations and its cash flows for each of the three years in the period ended December 31, 2019, in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2019, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission in 2013.

 

Emphasis of Matter

As discussed in Note 15 to the financial statements, the Company has changed its method of accounting for leases due to the adoption of ASU 2016-02 Leases (Topic 842), and the related amendments. Our opinion is not modified with respect to this matter.

 

Basis for Opinions

The Company's management is responsible for these financial statements, for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Annual Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company's financial statements and an opinion on the company's internal control over financial reporting based on our audits. We are a public accounting firm registered with the Public Company Accounting Oversight Board (United States) (PCAOB) and are required to be independent with respect to the Company in accordance with U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.

 

We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud, and whether effective internal control over financial reporting was maintained in all material respects.

 

Our audits of the financial statements included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

 

Definition and Limitations of Internal Control Over Financial Reporting

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the company's assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

/s/ Freed Maxick CPAs, P.C.  

 

We have served as the Company's auditor since 2014.

 

Buffalo, New York

March 16, 2020

 

F-2

 

 

VUZIX CORPORATION

 

CONSOLIDATED BALANCE SHEETS

 

    December 31,
2019
    December 31,
2018
 
ASSETS                
Current Assets                
Cash and Cash Equivalents   $ 10,606,091     $ 17,263,643  
Accounts Receivable, Net     1,371,913       772,336  
Note Receivable     250,000        
Inventories, Net     5,707,867       7,281,802  
Manufacturing Vendor Prepayments     242,539       755,219  
Prepaid Expenses and Other Assets     895,098       1,310,095  
                 
Total Current Assets     19,073,508       27,383,095  
                 
Long-Term Assets                
Fixed Assets, Net     4,327,676       4,291,690  
Operating Lease Right-of-Use Asset     2,096,190        
Patents and Trademarks, Net     1,294,675       1,164,543  
Licenses, Net     314,416       437,120  
Intangible Asset, Net     990,000       1,398,000  
Other Assets     350,000       459,192  
                 
Total Assets   $ 28,446,465     $ 35,133,640  
                 
LIABILITIES AND STOCKHOLDERS' EQUITY                
                 
Current Liabilities                
Accounts Payable   $ 1,062,785     $ 2,668,241  
Customer Deposits           152,362  
Unearned Revenue     142,463       211,726  
Accrued Expenses     885,897       1,614,078  
Taxes Payable     18,687       30,258  
Operating Lease Right-of-Use Liability     524,825        
                 
Total Current Liabilities     2,634,657       4,676,665  
                 
Long-Term Liabilities                
Operating Lease Right-of-Use Liability     1,571,365        
                 
Total Liabilities     4,206,022       4,676,665  
                 
Stockholders' Equity                
Preferred Stock - $.001 Par Value, 5,000,000 Shares Authorized; 49,626 and 49,626 Shares Issued and Outstanding as of December 31, 2019 and December 31, 2018.     50       50  
Common Stock - $.001 Par Value, 100,000,000 Shared Authorized; 33,128,620 Shares Issued and Outstanding as of December 31, 2019 and 27,591,670 as of December 31, 2018.     33,128       27,591  
Additional Paid-in Capital     168,950,076       148,695,775  
Accumulated Deficit     (144,742,811 )     (118,266,441 )
                 
Total Stockholders' Equity     24,240,443       30,456,975  
                 
Total Liabilities and Stockholders' Equity   $ 28,446,465     $ 35,133,640  

 

The accompanying notes are an integral part of these consolidated financial statements.  

 

F-3

 

 

VUZIX CORPORATION

 

CONSOLIDATED STATEMENTS OF CHANGES IN STOCKHOLDERS' EQUITY

 

   Preferred Stock   Common Stock   Additional
Paid-In
   Accumulated     
   Shares   Amount   Shares   Amount   Capital   Deficit   Total 
Balance - December 31, 2016   49,626   $50    19,569,247   $19,569   $94,541,168   $(76,838,950)  $17,721,837 
                                    
Exercise of Warrants           168,203    168    (168)        
Conversion of Notes Payable and Accrued Interest           827,237    827    1,860,456        1,861,283 
Common Stock Issued for Services           41,543    42    228,708        228,750 
Stock-Based Compensation Expense           16,668    17    1,355,505        1,355,522 
Common Stock Awards to Directors           50,000    50    334,950        335,000 
Proceeds from Common Stock Offerings           3,566,116    3,566    21,124,936        21,128,502 
Direct Costs of Common Stock Offerings                   (1,617,679)       (1,617,679)
Exercise of Stock Options           37,261    37    (37)        
2017 Net Loss                       (19,633,502)   (19,633,502)
                                    
Balance - December 31, 2017   49,626   $50    24,276,275   $24,276   $117,827,839   $(96,472,452)  $21,379,713 
                                    
Cumulative Revenue Adjustment - ASC 606 Adoption                       81,724    81,724 
Exercise of Warrants           84,210    84    39,289        39,373 
Settlement of Derivative Liability upon Exercise of Warrants                   166,800        166,800 
Exercise of Stock Options           41,111    41    (41)        
Stock-Based Compensation Expense           27,915    28    1,620,450        1,620,478 
Proceeds from Common Stock Offerings           3,000,000    3,000    29,997,000        30,000,000 
Direct Costs of Common Stock Offerings                   (1,975,000)       (1,975,000)
Common Stock Issued for Services           17,159    17    99,983        100,000 
Common Stock Awards           145,000    145    919,455        919,600 
2018 Net Loss                       (21,875,713)   (21,875,713)
                                    
Balance - December 31, 2018   49,626   $50    27,591,670   $27,591   $148,695,775   $(118,266,441)  $30,456,975 
                                    
Stock-Based Compensation           57,496    58    1,404,773        1,404,831 
Proceeds from Common Stock Offerings           5,479,454    5,479    19,994,528        20,000,007 
Direct Costs of Common Stock Offerings                   (1,145,000)       (1,145,000)
2019 Net Loss                       (26,476,370)   (26,476,370)
                                    
Balance - December 31, 2019   49,626   $50    33,128,620   $33,128   $168,950,076   $(144,742,811)  $24,240,443 

 

The accompanying notes are an integral part of these consolidated financial statements.  

 

F-4

 

 

VUZIX CORPORATION

 

CONSOLIDATED STATEMENTS OF OPERATIONS

 

 
   For Years Ended December 31, 
   2019   2018   2017 
             
Sales:               
Sales of Products  $5,997,453   $7,692,102   $4,548,689 
Sales of Engineering Services   673,151    402,266    989,064 
                
Total Sales   6,670,604    8,094,368    5,537,753 
                
Cost of Sales:               
Cost of Sales - Products Sold   6,334,333    6,072,476    5,269,900 

Cost of Sales - Inventory Reserve for Obsolescence

   4,572,659         
Cost of Sales - Engineering Services   171,733    253,610    944,451 
                
Total Cost of Sales   11,078,725    6,326,086    6,214,351 
                
Gross Profit (Loss) (exclusive of depreciation shown separately below)   (4,408,121)   1,768,282    (676,598)
                
Operating Expenses:               
Research and Development   8,900,837    10,378,728    6,706,690 
Selling and Marketing   4,215,611    4,822,639    3,694,913 
General and Administrative   6,600,092    6,973,238    6,126,335 
Depreciation and Amortization   2,441,581    1,469,664    998,528 
Impairment of Software Development Cost       196,223     
Loss (Gain) on Inventory Revaluation and Product Discontinuance       (211,416)   1,151,482 
                
Total Operating Expenses   22,158,121    23,629,076    18,677,948 
Loss from Operations   (26,566,242)   (21,860,794)   (19,354,546)
                
Other Income (Expense):               
Investment Income   252,416    191,755    58,530 
Other Taxes   (110,269)   (57,917)   (28,363)
Foreign Exchange Loss   (52,275)   (60,380)   (65,248)
Loss on Asset Disposal       (55,172)   (585)
Gain (Loss) on Derivative Valuation       (13,873)   20,204 
Amortization of Term Debt Discounts and Deferred Issuance Costs           (175,260)
Interest Expense       (19,332)   (88,234)
                
Total Other Income (Expense), Net   89,872    (14,919)   (278,956)
                
Loss Before Provision for Income Taxes   (26,476,370)   (21,875,713)   (19,633,502)
Provision for Income Taxes            
                
Net Loss   (26,476,370)   (21,875,713)   (19,633,502)
Preferred Stock Dividends   (1,931,860)   (1,820,168)   (1,714,934)
Loss Attributable to Common Stockholders  $(28,408,230)  $(23,695,881)  $(21,348,436)
                
Basic and Diluted Loss per Share  $(0.94)  $(0.87)  $(1.02)
Weighted-average Shares Outstanding - Basic and Diluted   30,348,452    27,182,560    21,013,907 
                

 

The accompanying notes are an integral part of these consolidated financial statements.

 

F-5

 

 

VUZIX CORPORATION

 

CONSOLIDATED STATEMENTS OF CASH FLOWS

 

    For Years Ended December 31,  
    2019     2018     2017  
Cash Flows from Operating Activities                        
Net Loss   $ (26,476,370 )   $ (21,875,713 )   $ (19,633,502 )
Non-Cash Adjustments                        
Depreciation and Amortization     2,441,581       1,469,664       998,528  
Amortization of Software Development Costs in Cost of Sales - Products     100,000       100,000       214,838  
Stock-Based Compensation     1,498,357       2,272,481       1,852,022  
Loss on Disposal of Fixed Assets           55,172       585  
Amortization of Term Debt Discounts and Deferred Issuance Costs                 175,260  
Loss on Derivative Valuation           13,873       (20,204 )
Impairment of Software Development Cost           196,223        
Inventory Reserve for Obsolescence     4,572,659              
Loss (Gain) on Inventory Revaluation and Product Discontinuance           (211,416 )     1,151,482  
(Increase) Decrease in Operating Assets                        
Accounts Receivable     (599,577 )     201,836       (870,858 )
Accrued Project Revenue           497,784       (497,784 )
Inventories     (2,998,724 )     (3,429,485 )     (2,352,581 )
Manufacturer Vendor Prepayments     512,680       (600,502 )     (10,549 )
Prepaid Expenses and Other Assets     414,997       (69,959 )     (9,288 )
Increase (Decrease) in Operating Liabilities                        
Accounts Payable     (1,605,456 )     (846,399 )     2,640,584  
Accrued Expenses     21,819       (26,789 )     554,832  
Customer Deposits     (152,362 )     78,900       7,300  
Unearned Revenue     (69,263 )     103,902       (401,748 )
Other Taxes     (15,361 )     26,758       (8,790 )
Accrued Compensation           (327,469 )     (321,250 )
Accrued Interest           (171,435 )     65,417  
                         
Net Cash Flows Used in Operating Activities     (22,355,020 )     (22,542,574 )     (16,465,706 )
                         
Cash Flows from Investing Activities                        
Purchase of Fixed Assets     (1,898,771 )     (1,365,388 )     (1,681,258 )
Investments in Patents and Trademarks     (250,304 )     (444,906 )     (599,444 )
Investments in Licenses and Other Intangible Assets     (758,464 )     (1,250,000 )      
Notes Receivable     (250,000 )            
Investments in Software Development           (87,500 )     (408,723 )
                         
Net Cash Used in Investing Activities     (3,157,539 )     (3,147,794 )     (2,689,425 )
                         
Cash Flows from Financing Activities                        
Proceeds from Exercise of Warrants           39,375        
Proceeds from Common Stock Offerings     20,000,007       30,000,000       21,128,502  
Issuance Costs on Common Stock Offerings     (1,145,000 )     (1,975,000 )     (1,617,679 )
                         
Net Cash Flows from Financing Activities     18,855,007       28,064,375       19,510,823  
                         
Net Increase (Decrease) in Cash and Cash Equivalents     (6,657,552 )     2,374,007       355,692  
Cash and Cash Equivalents - Beginning of Period     17,263,643       14,889,636       14,533,944  
                         
Cash and Cash Equivalents - End of Period   $ 10,606,091     $ 17,263,643     $ 14,889,636  
                         
Supplemental Disclosures                        
Interest Paid in Cash   $     $ 19,128     $ 22,814  
Non-cash Investing and Financing Activities                        
Common Stock Issued for Services included in Prepaid Expenses   $ 83,475     $ 25,000     $  
Investment in Other Intangible Assets included in Accrued Expenses   $     $ 750,000     $  
Conversion of Term Debt and Accrued Interest into Common Stock   $     $     $ 1,861,283  
Reclassification of Derivative Liability Upon Warrant Exercise   $     $ 166,800     $  
Cumulative Revenue Adjustment - ASC 606 Adoption   $     $ 81,724     $  
Stock-Based Compensation Expense - Expensed less Previously Issued   $ 93,587     $ 678,815     $  

 

The accompanying notes are an integral part of these consolidated financial statements.    

 

F-6

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

 

Note 1 — Summary of Significant Accounting Policies

 

Operations

 

Vuzix Corporation (the Company) was formed in 1997 under the laws of the State of Delaware and maintains its corporate offices in Rochester, New York. We are engaged in the design, manufacture, marketing and sale of augmented reality wearable display and computing devices also referred to as head mounted displays (or HMDs, but also known as near-eye displays), in the form of Smart Glasses and Augmented Reality (AR) glasses. Our AR wearable display devices are worn like eyeglasses or attach to a head worn mount. These devices typically include cameras, sensors, and a computer that enable the user to view, record and interact with video and digital content, such as computer data, the Internet, social media or entertainment applications. Our wearable display products integrate micro-display technology with our advanced optics to produce compact high-resolution display engines, less than half an inch diagonally, which when viewed through our smart glasses products create virtual images that appear comparable in size to that of a computer monitor or a large-screen television. The wearable display products we produce can be used for a variety of enterprise and commercial users and applications, including AR for on-the-go users and as mobile displays for entertainment and social media use. Our products are available with varying features and are offered as monocular display systems.

 

Principles of Consolidation

 

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiary, Vuzix Europe Limited. All significant inter-company transactions have been eliminated. Certain prior year amounts have been reclassified to be consistent with current year presentation.

 

Segment Data, Geographic Information and Significant Customers

 

The Company is not organized by market and is managed and operated as one business. A single management team that reports to the chief operating decision maker comprehensively manages the entire business. The Company does not operate any material separate lines of business or separate business entities. Accordingly, the Company does not accumulate discrete information, other than product revenue and material costs, with respect to separate product lines and does not have separately reportable segments as defined by FASB ASC Topic 280, “Disclosures about Segments of an Enterprise and Related Information”.

 

Refer to Note 18 — Geographic and Other Financial Information (Unaudited).

 

F-7

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Foreign Currency Transactions

 

The Company considers the US dollar as the functional currency of the Company’s UK Subsidiary. The Company’s UK Subsidiary transacts in Euros and British pounds. All transactions in foreign currencies are recorded in US dollars at the then current exchange rate(s). Upon settlement of the underlying transaction, all amounts are re-measured to US dollars at the current exchange rate on date of settlement. All unsettled foreign currency transactions that remain in accounts receivable and trade account payables are re-measured to US dollars at the period end exchange rates. All re-measurement gains and losses are recorded in the current period net income.

 

Use of Estimates

 

The preparation of the consolidated financial statements in conformity with accounting principles generally accepted in the United States requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at year-end and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

 

Concentration of Credit Risk

 

The Company maintains its cash in bank deposit accounts, which at times may exceed federally insured limits.

 

Cash and Cash Equivalents

 

Cash and cash equivalents can include highly liquid investments with original maturities of three months or less.

 

Fair Value of Financial Instruments

 

The Company’s financial instruments primarily consist of cash and cash equivalents, accounts receivable, notes receivable, accounts payable, customer deposits, accrued expenses, and income taxes payable. As of the consolidated balance sheet dates, the estimated fair values of the financial instruments were not materially different from their carrying values as presented due to the short maturities of these instruments.

 

Accounts Receivable

 

The Company carries its trade accounts receivable at invoice amount less an allowance for doubtful accounts. The Company establishes an allowance for uncollectible trade accounts receivable based on the age of outstanding invoices and management’s evaluation of collectability of outstanding balances. These provisions are established when the aging of outstanding amounts exceeds allowable terms and are re-evaluated at each quarter end for adequacy. In determining the adequacy of the provision, the Company considers known uncollectible or at-risk receivables. The allowance for doubtful accounts as of December 31, 2019 and 2018 was nil and $7,280, respectively. The Company does not accrue interest on any past due accounts receivable unless such receivable goes into collection.

 

Notes Receivable

 

On December 17, 2019, the Company provided a one-year convertible promissory note to a confidential strategic business partner for $250,000. The note carries an interest rate of 8%, compounded monthly. The principal and accrued interest become due and payable to the Company on November 15, 2020. The note contains mandatory and automatic conversions of principal and accrued interest into equity upon on the occurrence of a triggering event at a pre-defined conversion price range. The pre-defined conversion price range if triggered, would result in the Company owning 1 to 2.5% of this entity.

 

Customer Concentrations

 

Foxconn Technology Group, or Foxconn (f/k/a Toshiba Japan) represented 16% of total product revenue and one confidential defense customer represented 100% of engineering services revenue for the year ended December 31, 2019. Foxconn, SATS Airport Services Pte Ltd and AMA SA represented 17%, 10% and 10% of our total revenues in 2018, respectively. Foxconn represented 18% of our total revenue in 2017.

 

Ubimax GmbH, Foxconn and a confidential defense customer represented 32%, 26% and 13%, respectively, of accounts receivable at December 31, 2019. Foxconn and SATS represented 32% and 38%, respectively, of accounts receivable at December 31, 2018. Foxconn represented 25% of accounts receivable and 100% of accrued project revenues at December 31, 2017.

 

Accrued Project Revenue

 

The Company carries accrued project revenue based on the percentage of completion on the project measured using the input method based upon costs incurred to-date as a percentage of total expected costs to complete the project less amounts invoiced, if any. As of December 31, 2019 and 2018, we had nil in accrued project revenue.

 

Inventories

 

Inventories are valued at the lower of cost or net realizable value using the weighted average first-in, first-out method. The Company includes labor and overhead costs in its inventory valuation costing. The Company records provisions for excess, obsolete or slow-moving inventory based on changes in customer demand, technology developments or other economic factors. The Company’s products have product life cycles that range on average from two to three years currently. At both the product introduction and product discontinuation stage, there is a higher degree of risk of inventory obsolescence. The provision for obsolete and excess inventory is evaluated for adequacy at each quarter end. The estimate of the provision for obsolete and excess inventory is partially based on expected future product sales, which are difficult to forecast for certain products.

 

F-8

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Revenue Recognition

 

The Company adopted the new guidance on Revenue from Contracts with Customers under FASB ASC Topic 606, “Revenue from Contracts with Customers”, as of January 1, 2018. Refer to Note 2 for further discussion on the impact of this adoption. Product sales represent the majority of the Company’s revenue. The Company recognizes revenue from these product sales as performance obligations are satisfied and transfer of control and ownership to the customer has occurred, typically upon physical shipment. Revenue is recognized in the amount that the Company expects to receive in exchange from the sale of our products. FOB shipping point is our standard shipping terms and revenue is recognized as our products ship to customers, as control and ownership are transferred at this point in time. All of our standard products sales include a 30-day money back guarantee and expected returns are estimated at each reporting period date and a portion of revenue is deferred for all estimated returns. As of December 31, 2019, deferred revenue associated with our expected returns was immaterial. The Company collects and remits sales taxes in certain jurisdictions and reports revenue net of any associated sales taxes.

 

Revenue from any engineering consulting and other services is recognized at the time the services are rendered. The Company accounts for its longer-term development contracts, which to date have all been firm fixed-priced contracts, on the percentage-of-completion method, whereby income is recognized as work on contracts progresses, but estimated losses on contracts in progress are charged to operations immediately. The percentage-of-completion is determined using the cost-to-cost method. To date, all such contracts have been less than one calendar year in duration.

 

F-9

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Unearned Revenue

 

These amounts represent deferred revenue against unfulfilled performance obligations such as extended product warranty sales and sales of our Vuzix Basic Video applications, which are amortized over a twelve (12) month period.

 

Customer Deposits

 

Customer deposits represent money the Company has received in advance of providing a product or engineering services to a customer. All such deposits are short term in nature as the Company typically delivers the product or engineering services provided to the customer within one year. These deposits are credited to the customer against product deliveries or at the completion of the customer’s order. As of December 31, 2019 and 2018, we had nil and $152,362 in outstanding customer deposits.

 

Cost of Product Revenues

 

Cost of product revenue includes the direct and allocated indirect costs of products sold to customers. Direct costs include labor, materials, reserves for estimated warranty expenses, and other costs incurred directly, or charged to us by our contract manufacturers in the manufacture of these products. Indirect costs include labor, manufacturing overhead, and other costs associated with operating our manufacturing facility and capacity. Manufacturing overhead includes the costs of procuring, inspecting and storing material, facility and other costs, and is allocated to cost of product revenue based on the proportion of indirect labor which supported production activities. Depreciation on manufacturing tools and equipment is included in Operating Expenses in our consolidated statement of operations. The cost of product revenue can fluctuate significantly from period to period, depending on the product mix and volume, the level of manufacturing overhead expense and the volume of direct material purchased.

 

Cost of Engineering Services Revenues

 

Cost of engineering services revenues includes both the direct and allocated indirect costs of performing on contracts and producing prototype units. Direct costs include labor, materials and other costs incurred directly in performing under the contract. Direct costs also include labor and other costs associated with operating our research and development department based on the level of effort supporting the development activity. Cost of contract revenue is determined by the level of direct and indirect costs incurred, which can fluctuate substantially from period to period.

 

Fixed Assets  

 

Fixed assets are stated at cost. Depreciation of fixed assets is provided for using the straight-line method over the following estimated useful lives:

 

Computers and Purchased Software 3 years
Leasehold Improvements Lesser of expected life or lease term
Manufacturing Equipment 5 years
Tooling 3 years
Furniture and Equipment 5 years

 

Repairs and maintenance costs are expensed as incurred. Asset betterments are capitalized and depreciated over their expected useful life.

 

Patents and Trademarks

 

The Company capitalizes the costs of obtaining its patents and registration of trademarks. Such costs are accumulated and capitalized during the filing periods, which can take several years to complete. Successful applications that result in the granting of a patent or trademark are then amortized over 15 years on a straight-line basis. Unsuccessful applications are written off and expensed in the fiscal period where the application is abandoned or discontinued.

 

F-10

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Software Development Costs

 

The Company capitalizes the costs of obtaining or developing its software once technological feasibility has been determined by management. Such costs are accumulated and capitalized. Projects can take several years to complete. Unsuccessful or discontinued software projects are written off and expensed in the fiscal period when the software development effort is abandoned or discontinued. Costs incurred internally in researching and developing a computer software product are charged to expense until technological feasibility has been established for the product. Once technological feasibility is established, all software costs are capitalized until the product is available for general release to customers. Judgment is required in determining when technological feasibility of a product is established. Once the product is available for general release, accumulated costs are amortized over the life of the asset. The amortization of these costs is included in cost of revenue over the estimated life of the products, which currently is estimated as three years using a straight-line basis. As of December 31, 2019, we had $100,000 of net software development costs included in Other Assets. For the years ended December 31, 2019 and 2018, there was nil and $196,223, respectively in software impairment costs.

 

Licenses

 

The Company capitalizes the costs of acquiring licenses and prepaid royalties. They are amortized on either a per unit basis or straight line over the life of the license. In some cases, future royalties are subject to annual limits.

 

Long-Lived Assets

 

The Company at least annually assesses all of its long-lived assets for impairment when events or circumstances indicate their carrying amounts may not be recoverable, in accordance with FASB ASC Topic 360-10, “Accounting for the Impairment or Disposal of Long-Lived Assets.” There was no impairment charge in 2019, 2018 and 2017.

 

Research and Development

 

Research and development costs are expensed as incurred consistent with the guidance of FASB ASC Topic 730, “Research and Development,” and include employee related costs, office expenses, third-party design and engineering services, and new product prototyping costs. Costs incurred internally in researching and developing a computer software product are charged to expense until technological feasibility has been established for the product.

 

Shipping and Handling Costs

 

Amounts charged to customers and costs incurred by the Company related to shipping and handling are included in net sales and cost of sales, respectively.

 

F-11

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Provision for Future Warranty Costs

 

The Company provides for the estimated returns under warranty and the costs of fulfilling our obligations under product warranties at the time the related revenue is recognized. The Company estimates the costs based on historical and projected product failure rates, historical and projected repair costs, and knowledge of specific product failures (if any). The specific warranty terms and conditions vary depending upon the country in which we do business, but generally include parts and labor over a period generally ranging from one to two years from the date of product shipment. The Company provides a reserve for expected future warranty returns at the time of product shipment or produces over-builds to cover replacements. We regularly reevaluate our estimates to assess the adequacy of the recorded warranty liabilities and adjust the amounts as necessary each quarter end, based on historical experience of warranty claims and costs.

 

Advertising

 

Advertising costs are expensed as incurred and recorded in “Selling and Marketing” in the Consolidated Statements of Operations. Advertising expense for the years ended December 31, 2019, 2018 and 2017 was $1,302,120, $1,631,161 and $1,386,977, respectively.

 

Income Taxes

 

The Company accounts for income taxes in accordance with FASB ASC Topic 740-10, “Income Taxes.” Accordingly, the Company provides deferred income tax assets and liabilities based on the estimated future tax effects of differences between the financial and tax bases of assets and liabilities based on currently enacted tax laws. A valuation allowance is established for deferred tax assets in amounts for which realization is not considered more likely than not to occur.

 

The Company reports any interest and penalties accrued relating to uncertain income tax positions as a component of the income tax provision.

 

Net Loss Per Share

 

Basic earnings per share is computed by dividing the net income (loss) less accrued dividends on any outstanding preferred stock by the weighted average number of common shares outstanding for the period. Diluted earnings per share calculations reflect the assumed exercise of all dilutive employee stock options and warrants applying the treasury stock method promulgated by FASB ASC Topic 260, “Earnings Per Share” and the conversion of any outstanding convertible preferred shares or notes payable that are-in-the-money, applying the as-if-converted method. However, if the assumed exercise of stock options and warrants and the conversion of any preferred shares or convertible notes payable are anti-dilutive, basic and diluted earnings per share are the same for all periods. As a result of the net losses generated in 2019, 2018 and 2017, all outstanding instruments would be antidilutive. As of December 31, 2019, 2018 and 2017, there were 12,858,707, 8,742,183 and 7,657,756 common stock share equivalents, respectively, that were potentially issuable under convertible debt agreements, options, conversion of preferred shares (excluding accrued dividends), and warrants that could potentially dilute basic earnings per share in the future.

 

F-12

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Stock-Based Compensation Expense

 

The Company accounts for stock-based compensation to employees and directors in accordance with FASB ASC Topic 718 “Compensation - Stock Compensation,” which requires that compensation expense be recognized in the consolidated financial statements for stock-based awards based on the grant date fair value. For stock option awards, the Black-Scholes-Merton option pricing model was used to estimate the fair value of share-based awards under FASB ASC Topic 718. The Black-Scholes-Merton option pricing model incorporates various and highly subjective assumptions, including expected term and share price volatility. The expected term of options granted was estimated to be the average of the vesting term, historical exercise and forfeiture rates, and the contractual life of the option. The share price volatility at the grant date is estimated using historical stock prices based upon the expected term of the options granted. The risk-free interest rate assumption is determined using the rates for U.S. Treasury zero-coupon bonds with maturities similar to those of the expected term of the award being valued.

 

For common stock awards, the Company uses the fair market value of our common stock on the date of each stock-based award based on the market price of the Company’s common shares and the expense related to these awards is recognized over the requisite service period of the awards on a straight-line or graded vesting basis, which is generally commensurate with the vesting term. Stock-based compensation expense associated with stock awards and stock option grants for the years ended December 31, 2019, 2018 and 2017 was $1,498,357, $2,197,481 and $1,623,272, respectively. The Company issues new shares upon stock option exercises.

 

Leases

 

The Company determines if an arrangement is a lease at inception. Our lease agreements generally contain lease and non-lease components. Historically, non-lease components such as utilities have been immaterial. Payments under our lease arrangements are primarily fixed. Lease assets and liabilities are recognized at the present value of the future lease payments at the lease commencement date. The interest rate used to determine the present value of the future lease payments is our incremental borrowing rate, because the interest rate implicit in our leases is not readily determinable. Our incremental borrowing rate is estimated to approximate the interest rate on a collateralized basis with similar terms and payments, and in economic environments where the leased asset is located. Our lease terms include periods under options to extend or terminate the lease when it is reasonably certain that we will exercise that option.

 

As of December 31, 2019, all of our leases are considered operating leases. Operating right of use assets and liabilities are included on our Consolidated Balance Sheets beginning January 1, 2019. The Company does not have any finance leases as of December 31, 2019.

 

F-13

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Recent Accounting Pronouncements

 

 In June 2016, the Financial Accounting Standards Board (the “FASB”) issued ASU 2016-13, Financial Instruments - Credit Losses (Topic 326). ASU 2016-13 provides for a new impairment model which requires measurement and recognition of expected credit losses for most financial assets and certain other instruments, including but not limited to accounts receivable. ASU 2016-13 will become effective for the Company on January 1, 2023 and early adoption is permitted. The Company does not anticipate the adoption of this standard will have a material impact on our consolidated financial statements.

 

F-14

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued) 

 

Note 2 – Revenue Recognition and Contracts with Customers

 

Disaggregated Revenue

 

 The Company’s total revenue was comprised of four major product lines: Smart Glasses and iWear Video Headphone Sales, OEM Product Sales, Waveguide and Display Engine Sales, and Engineering Services. The following table summarizes the revenue recognized by major product line: 

 

   For the Years Ended December 31, 
    2019    2018    2017 
Revenues               
Smart Glasses and iWear Video Headphones Sales  $4,893,384   $6,512,202   $4,197,633 
OEM Product Sales   951,570    994,500     
Waveguide and Display Engine Sales   152,499    185,400    351,056 
Engineering Services   673,151    402,266    989,064 
                
Total Revenue  $6,670,604   $8,094,368   $5,537,753 

 

Significant Judgments

 

 Under Topic 606, there are judgments used that could potentially impact both the timing of our satisfaction of performance obligations and our determination of transaction prices used in determining revenue recognized by major product line. Judgments made include considerations in determining our transaction prices for our standard product sales that include an end-user 30-day right to return if not satisfied with product and include general payment terms that are between Net 30 and 60 days. For our Engineering Services, performance obligations are recognized over time using the input method and the estimated costs to complete each project are considered significant judgments.

 

Performance Obligations

 

Revenues from our performance obligations are typically satisfied at a point in time for Smart Glasses, Waveguides and Display Engines, and our OEM Products, which are recognized when the customer obtains control and ownership, which is generally upon shipment. The Company also records revenue for performance obligations relating to our Engineering Services over time by using the input method measuring progress toward satisfying the performance obligations. Satisfaction of our performance obligations related to our Engineering Services is measured by the Company’s cost incurred as a percentage of total expected costs to project completion as the inputs of actual costs incurred by the Company are directly correlated with progress of completing the contract. As such, the Company believes that our methodologies for recognizing revenue over time for our Engineering Services correlate directly with the transfer of control of the underlying assets to our customers.

 

Our standard product sales include a twelve (12) month assurance-type product warranty, except in certain European countries where it can be twenty-four (24) months for some consumer-focused products. In the case of our OEM products and waveguide sales, some include a standard product warranty of up to eighteen (18) months. In 2018, we began offering extended warranties to customers, which extend the standard product warranty on product sales for an additional twelve (12) month period. All revenue related to extended product warranty sales is deferred and recognized over the extended warranty period. Our engineering services contracts vary from contract to contract but typically include payment terms of Net 30 days from date of billing, subject to an agreed upon customer acceptance period.

 

F-15

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The following table presents a summary of the Company’s net sales by revenue recognition method as a percentage of total net sales for the year ended December 31, 2019:

 

   % of Total Net Sales 
Point-in-Time – Output Method   90%
Over Time – Input Method   10%
Total   100%

 

Remaining Performance Obligations

 

As of December 31, 2019, the Company had $123,000 of remaining performance obligations related to its extended warranties, which are included in deferred revenue on our Consolidated Balance Sheets. The Company is recognizing this deferred revenue on a straight-line basis ending on September 30, 2020.

  

Note 3 — Going Concern

 

The accompanying consolidated financial statements have been prepared assuming that we will continue as a going concern. This basis of accounting contemplates the recovery of our assets and the satisfaction of liabilities in the normal course of business. These consolidated financial statements do not include any adjustments to the specific amounts and classifications of assets and liabilities, which might be necessary should we be unable to continue as a going concern. The Company incurred annual net losses for the years ended December 31, 2019, 2018 and 2017 of $26,476,370, $21,875,713 and $19,633,502, respectively. As of December 31, 2019, the Company had an accumulated deficit of $144,742,811.

 

The Company’s cash requirements are primarily for funding operating losses, research and development, working capital, and capital expenditures. Our cash requirements related to funding operating losses depend on numerous factors, including new product development activities, our ability to commercialize our products, our products’ timely market acceptance, selling prices and gross margins, and other factors. Historically, the Company has met its cash needs primarily by the sale of equity securities.

 

The Company’s management intends to take actions necessary to continue as a going concern, as discussed herein. The Company will need to grow its business significantly to become profitable and self-sustaining on a cash flow basis or it will be required to raise new equity and/or debt capital. Management’s plans concerning these matters and managing our liquidity include, among other things:

  

  · the continued sale of our existing M300XL finished goods and Blade component inventory, of which we have significant levels;
     
  · the expected success of our third-generation monocular device for enterprise, the M400 Smart Glasses. This product entered mass production near the end of the third quarter of 2019, and to date customer interest and adoption of the M400 has been more rapid than earlier models;
     
  ·

the commencement of volume manufacturing and sale of the new Vuzix Smart Swim product in the second quarter of 2020;

     
  · the timely sale and disposal of as many products and components as possible included in our write-down losses on the M300 Smart Glasses and excess components related to the cessation of production of it and the M300-C Smart Glasses in China. Management intends to seek to recover some cash from the $4,572,659 of inventory reserved for in the year ended December 31, 2019; 
     
  · increase our efforts to further promote our engineering services programs, which result in overall larger gross margins by absorbing some of our operating costs by utilizing a significant portion of our internal engineering fixed salary costs;
     
  ·

continue to pursue licensing and strategic opportunities around our waveguide technologies with potential OEMs, which would include the receipt of upfront licensing fees and supply agreements;

     
  · greater control of operating costs and reductions in spending growth rates wherever possible;
     
  · decrease tradeshow and external PR expenditures;
     
  · right-size operations across all areas of the Company, including head-count and salary freezes and overall spending;
     
  · delay or curtail discretionary and non-essential capital expenditures not related to near-term new products;
     
  · reduce the rate of new product introductions and leverage existing platforms to reduce new product development and engineering costs;
     
  · the introduction of the M4000 in late Q2-2020 will be the Company’s next generation see-through waveguide-based product specifically designed for the enterprise market; and
     
  · further reduce the rate of research and development spending on new technologies, particularly the use of external contractors.

 

 

F-16

 

  

Historically, the Company has met its cash needs primarily through the sale of equity securities. On July 1, 2019, the Company entered into a securities purchase agreement with certain purchasers for the sale of an aggregate of 5,479,454 shares of the Company’s common stock along with warrants to purchase an aggregate of up to 5,479,454 additional shares of common stock, in a registered direct offering at a combined purchase price of $3.65 per share and warrant for aggregate gross sale proceeds of $20,000,007. The purchase agreement closed on July 2, 2019. The Company received net proceeds after issuance costs and expenses of $18,855,007. The warrants sold in the offering are exercisable for a period of two years commencing six months from the issuance date at an exercise price of $4.10 per share.

 

Based upon our current amount of cash on hand, management’s historical ability to raise capital, and our ability to manage our cost structure and adjust operating plans if and as required, we have concluded that substantial doubt of our ability to continue as a going concern has been alleviated.

 

F-17

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 4 — Inventories, Net

 

Inventories consisted of the following: 

 

   December 31,
2019
   December 31,
2018
 
Purchased Parts and Components  $5,985,214   $3,284,848 
Work in Process   2,414,142    1,523,616 
Finished Goods   2,096,744    2,837,183 
Less: Reserve for Obsolescence   (4,788,233)   (363,845)
           
Inventories, Net  $5,707,867   $7,281,802 

 

In addition to its normal Reserve for Obsolescence provision, (i) the Company wrote down to net realizable value all of its component inventory parts related to its M300 and M300XL Smart Glasses products, resulting from the decision to end their production as they are at a disadvantaged selling position against our newer, improved M400 introduced in the fall of 2019. The total net realizable value write-down recorded at December 31, 2019 was $3,153,028, and (ii) the Company recorded an additional obsolescence provision of $1,419,631 related to its legacy M300 finished goods on hand as of December 31, 2019. The write-down and obsolescence provision totaled $4,572,659 for the year ended and as of December 31, 2019. These provisions were included in Cost of Sales on the Consolidated Statements of Operations.

 

F-18

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 5 — Fixed Assets, Net

 

Fixed Assets consisted of the following:

 

    December 31,
2019
    December 31,
2018
 
Tooling and Manufacturing Equipment   $ 5,262,080     $ 4,199,309  
Leaseholds     773,734       487,957  
Computers and Purchased Software     824,965       937,946  
Furniture and Equipment     2,043,355       1,721,963  
                 
      8,904,134       7,347,175  
Less: Accumulated Depreciation     (4,576,458 )     (3,055,485 )
                 
Fixed Assets, Net   $ 4,327,676     $ 4,291,690  

 

Total depreciation expense for fixed assets for the years ended December 31, 2019, 2018 and 2017 was $1,913,409, $1,273,527 and $921,113, respectively.

 

Note 6 — Patents and Trademarks, Net

 

   December 31,
2019
   December 31,
2018
 
Patents and Trademarks  $2,020,070   $1,769,767 
Less: Accumulated Amortization   (725,395)   (605,224)
           
Patents and Trademarks, Net  $1,294,675   $1,164,543 

 

Total amortization expense for patents and trademarks for the years ended December 31, 2019, 2018 and 2017 was $120,172, $94,137 and $77,415, respectively. The estimated aggregate annual amortization expense for each of the next five fiscal years is approximately $135,000. We recorded no patent impairment charges for the years ended December 31, 2019, 2018 and 2017.

 

F-19

 

  

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 7 — Licenses, Net

 

   December 31,
2019
   December 31,
2018
 
Licenses  $493,717   $493,717 
Less: Accumulated Amortization   (179,301)   (56,597)
           
Licenses, Net  $314,416   $437,120 

 

On October 4, 2018, the Company invested in WakingApp Ltd., a private corporation in the augmented reality software tool market. The Company participated in a financing round with other investors that resulted in the Company acquiring less than a 1% ownership interest, in the form of preferred stock, in WakingApp Ltd., for a purchase price of $250,000. As part of this investment, the Company entered into a commercial agreement with WakingApp such that WakingApp agreed to: (i) provide full support of the Company’s AR products through the WakingApp AR tool software; (ii) provide three (3) working AR environments built with their tools to give away as demonstrations on the M300 and M300XL; and (iii) allow the Company to provide 60-day free licenses to their AR software tool to up to 100,000 of the Company’s developers and customers. The Company considers this investment as a prepaid licensing arrangement over a 36-month term; as such, this addition will be amortized over three years and included in Cost of Sales – Products in the Consolidated Statement of Operations.

 

The Company acquired two licenses in 2017. The first related to the renegotiation of an existing license at a cost of $114,967, which will result in lower royalty rates being paid by the Company over the next 10 years.  This license went into effect as of January 1, 2018. The second license was a result of the Company entering into a Technology Acquisition Agreement where it acquired all the seller's right, title and interest in certain Transferred Intellectual Property (IP). Pursuant to the agreement, the Company paid approximately $75,702 as reimbursement of related patent application costs incurred by the seller to date, which are included in Patents and Trademarks. The Company also issued 25,000 shares, valued at $128,750, upon the closing and will issue (i) a further 25,000 shares after the Company has successfully developed a working demonstrator system utilizing the IP; and (ii) 50,000 shares once the Company completes the successful commercialization of products containing the IP for sale in the marketplace. The Company estimates that, by end of 2021, it should be able to achieve the first development milestone of a functional demonstrator model and that it will need to spend a further $250,000 in additional R&D.

 

F-20

 

 

Total amortization expense related to licenses in the years ended December 31, 2019, 2018 and 2017 was $122,704, $56,597, and $0, respectively.

 

Note 8 — Intangible Asset, Net

 

   December 31,
2019
   December 31,
2018
 
Intangible Asset  $1,500,000   $1,500,000 
Less: Accumulated Amortization   (510,000)   (102,000)
           
Intangible Asset, Net  $990,000   $1,398,000 

 

On October 4, 2018, the Company entered into amendment No. 1 to agreements (the “TDG Amendment”), with TDG Acquisition Company, LLC (“TDG”), aka Six15 Technologies, LLC. The TDG Amendment amends certain provisions of prior agreements between Vuzix and TDG, including an asset purchase agreement dated June 15, 2012, and an authorized reseller agreement dated June 15, 2012.

 

Pursuant to the TDG Amendment, the Company will be permitted to engage in sales of heads-up display components or subsystems (and any services to support such sale) for incorporation into a finished good or system for sale to military organizations, subject to certain conditions. The Company will also be permitted to sell its products to defense and security organizations that include business customers and governmental entity customers that primarily provide security and defense services, including police, fire fighters, EMTs, other first responders, and homeland and border security. The Company will owe TDG commissions with respect to all such sales until June 2022. Total commissions expense under this agreement for the years ended December 31, 2019 and 2018 was $116,469 and nil, respectively.

 

Total amortization expense for this intangible asset for the years ended December 31, 2019 and 2018 was $408,000 and $102,000, respectively. Future monthly amortization expense for the next 29 months is $34,000 per month.

  

Note 9 – Other Assets

 

The Company’s other assets consists of the following:

 

   December 31,
2019
   December 31,
2018
 
Other  $   $9,192 
Private Corporation Investment    250,000    250,000 
Total Other Assets, Non-Amortizing   250,000    259,192 
           
Software Development Costs   300,000    496,223 
Less:  Accumulated Amortization   (200,000)   (100,000)
Less: Impairment       (196,223)
Software Development Costs, Net   100,000    200,000 
           
Total Other Assets  $350,000   $459,192 

 

In the second quarter of 2018, the Company acquired, for a purchase price of $250,000, approximately a 1% ownership interest, in the form of preferred stock, in a private corporation in the low vision near eye display market, which the Company has valued at cost. This investment was recorded at cost as its fair value is not readily determinable. The Company has reviewed this investment and concluded that there were no indicators of impairment present as of December 31, 2019.

 

F-21

 

 

Total amortization expense for capitalized software development costs for the years ended December 31, 2019, 2018 and 2017 was $100,000, $100,000 and $214,838, respectively. The remaining costs of $100,000 are being amortized over one year and are included in Cost of Sales – Products in the Consolidated Statements of Operations. During the year ended December 31, 2018, a $196,223 impairment charge was recorded related to previously capitalized costs related to application software being developed for our M300 Smart Glasses, which was not expected to achieve expected revenue projections and was discontinued in 2018.

 

Note 10 — Accrued Expenses

 

Accrued expenses consisted of the following: 

 

   December 31,
2019
   December 31,
2018
 
Accrued Wages and Related Costs  $394,669   $461,619 
Accrued Professional Services   217,721    138,438 
Accrued Warranty Obligations   98,893    218,047 
Other Accrued Expenses   174,614    795,974 
           
Total  $885,897   $1,614,078 

  

Included in Other Accrued Expenses as of December 31, 2018 was $750,000 for the second and third payments described above in Note 8 related to the TDG Amendment.

 

F-22

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

 The Company has warranty obligations in connection with the sale of certain of its products. The warranty period for its products is generally twelve (12) months except in certain European countries where it can be twenty-four (24) months for some consumer-focused products. The costs incurred to provide for these warranty obligations are estimated and recorded as an accrued liability at the time of sale. The Company estimates its future warranty costs based on product-based historical performance rates and related costs to repair.

 

The changes in the Company’s accrued warranty obligations for the years ended December 31, 2019, 2018 and 2017 were as follows:

 

Accrued Warranty Obligations at December 31, 2016  $41,132 
Reductions for Settling Warranties   (157,035)
Warranty Issued During Year   283,406 
Accrued Warranty Obligations at December 31, 2017   167,503 
      
Reductions for Settling Warranties   (257,173)
Warranty Issued During Year   307,717 
Accrued Warranty Obligations at December 31, 2018   218,047 
      
Reductions for Settling Warranties   (204,583)
Warranty Issued During Year   85,429 
Accrued Warranty Obligations at December 31, 2019  $98,893 

 

 

F-23

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 11 — Income Taxes

 

The Company files U.S. federal and various state and foreign tax returns.

 

Pre-tax earnings consisted of the following for the years ended:

 

   December 31,   December 31,   December 31, 
   2019   2018   2017 
Pre-Tax Income (Loss)               
U.S.  $(26,482,033)  $(22,082,137)  $(19,680,720)
Outside the U.S.   5,663    206,424    47,218 
Total Pre-Tax Income (Loss)  $(26,476,370)  $(21,875,713)  $(19,633,502)

 

The provision expense/(benefit) for income taxes for the years ended December 31, 2019, 2018 and 2017 was as follows:

 

   2019   2018   2017 
U.S. Income Taxes:               
Current Provision  $   $   $ 
Deferred Provision   (5,382,746)   (4,848,470)   3,639,752 
Valuation Allowance   5,382,746    4,848,470    (3,639,752)
Income Taxes Outside the U.S.:               
Current Provision            
Deferred Provision   (511,672)   41,285    215,745 
Valuation Allowance   511,672   (41,285)   (215,745)
State Income Taxes:               
Current Provision            
Deferred Provision   (189,200)   (140,933)   (59,530)
Valuation Allowance   189,200    140,933    59,530 
                
Total Provision  $   $   $ 

 

A reconciliation of the statutory U.S. federal income tax rate to the effective rates for the years ended December 31, 2019, 2018 and 2017 is as follows:

 

   2019
%
   2018
%
   2017
%
 
Federal Income Tax at Statutory Rate   21.0    21.0    34.0 
State Tax Provision, Net of Federal Benefit   0.3    0.3    0.3 
Change in Corporate Tax Rates from 34% to 21%           (52.9)
Permanent Differences   (0.1)   (1.5)   (2.4)
Federal Tax Credits   1.3    2.5    1.1 
Stock Compensation   (1.9)        
Foreign Tax Provision   1.9         
Other   0.5   0.3    0.6 
                
Effective Tax Rate   23.0    22.6    (19.3)
Change in Valuation Allowance   (23.0)   (22.6)   19.3 
                
Net Effective Tax Rate            

 

F-24

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Significant components of the Company’s deferred tax assets and liabilities at year end are as follows:

 

    December 31,     December 31,     December 31,  
    2019     2018     2017  
Deferred Tax Assets:                        
Net Operating Loss Carry-forwards   $ 25,678,591     $ 20,920,285     $ 16,167,791  
Tax Credit Carry-forwards     3,535,863       3,035,384       2,404,490  
Inventory Valuation Adjustment     982,160       104,450       675,830  
Officer’s Compensation                 86,670  
Stock-based Compensation           175,753        
Lease Obligation Liability     446,488              
Other     263,348       207,327       108,734  
Total Deferred Tax Assets     30,906,450       24,443,199       19,443,515  
                         
Deferred Tax Liabilities:                        
Income from Foreign Operations           59,123       17,838  
Lease Right of Use Asset     446,488              
Other     14,335       22,069       11,789  
Total Deferred Tax Liabilities     460,823       81,192       29,627  
                         
Net Deferred Tax Assets Before Valuation Allowance   $ 30,445,627     $ 24,362,007     $ 19,413,888  
Valuation Allowance     (30,445,627 )     (24,362,007 )     (19,413,888 )
                         
Net Deferred Tax Assets   $     $     $  

  

As of December 31, 2019, the Company has approximately $118 million in US federal net operating loss (NOL) carry-forwards, $129,000 in United Kingdom NOL carry-forwards, and $1.35 million of Japanese NOL carry-forwards. The federal and state NOL carry-forwards generated in tax years prior to 2018 will begin to expire in 2020. As a result of the Tax Cuts and Jobs Act of 2017, the federal NOL carry-forwards created in 2018 and 2019 have no expiration. The Company has state NOLs of approximately $3.4 million available in several jurisdictions in which it files that will begin to expire in 2034. The Company also has approximately $3.5 million of federal and state credit carry-forwards. The federal and state credit carry-forwards began to expire during 2018. Utilization of the NOL carry-forwards may be subject to an annual limitation in the case of sufficient equity ownership changes under Section 382 of the tax law or the NOL's may expire unutilized.

 

As the result of the assessment of the FASB ASC 740-10, “Accounting for Uncertainty in Income Taxes — An Interpretation of FASB Statement No. 109”, the Company has no unrecognized tax benefits. The Company’s U.S. Federal and state tax matters for the years 2015 through 2018 remain subject to examination by the respective tax authorities.

 

FASB ASC 740 requires recognition of deferred tax assets and liabilities for the expected future tax consequences of events that have been included in the financial statements or tax returns. Under this method, deferred tax assets and liabilities are determined based on differing treatment of items for financial reporting and income tax reporting purposes. The deferred tax balances are adjusted to reflect tax rates by tax jurisdiction, based on currently enacted tax laws, which will be in effect in the years in which the temporary differences are expected to reverse. In light of the historic losses of the Company, a 100% valuation allowance has been recorded to fully offset any benefit associated with the net deferred tax assets, for which realization is not considered more likely than not to occur. 

 

Note 12 — Capital Stock

  

Preferred stock

 

The Board of Directors is authorized to establish and designate different series of preferred stock and to fix and determine the voting powers and other special rights and qualifications of such series. A total of 5,000,000 shares of preferred stock are authorized as of December 31, 2019 and December 31, 2018. There were 49,626 shares of Series A Preferred Stock issued and outstanding on December 31, 2019 and December 31, 2018. There were no declared preferred dividends owed as of December 31, 2019 or 2018.

 

On January 2, 2015 (the “Series A Closing Date”), we entered into and closed a Series A Preferred Stock Purchase Agreement (the “Series A Purchase Agreement”) with Intel Corporation (the “Series A Purchaser”), pursuant to which we issued and sold to the Series A Purchaser, an aggregate of 49,626 shares of the Company’s Series A Preferred Stock, at a purchase price of $500 per share, for an aggregate purchase price of $24,813,000 (the “Series A Private Placement”). Each share of Series A Preferred Stock is convertible, at the option of the Series A Purchaser, into 100 shares of the Company’s common stock (determined by dividing the Series A Original Issue Price of $500 by the Series A Conversion Price). The Series A Conversion Price is $5.00, subject to adjustment in the event of stock splits, dividends or other combinations.

 

F-25

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Each share of Series A Preferred Stock is entitled to receive dividends at a rate of 6% per year, compounded quarterly and payable in cash or in kind, at the Company’s sole discretion. As of December 31, 2019, total accrued and unpaid preferred dividends were $8,601,092. In the event of the liquidation, dissolution or winding up of the Company, each share of Series A Preferred Stock is entitled to a liquidation preference equal to one times (1x) the Series A Purchaser’s original per share purchase price, plus a right to receive an additional liquidation distribution together with the common stock holders pro rata on an as-converted basis, but not in excess of $1,000 per share in the aggregate (subject to adjustment for accrued but unpaid dividends and in the event of stock splits, dividends or other combinations). Each share of Series A Preferred Stock is entitled to vote with the holders of the Company’s common stock on matters presented to its stockholders and is entitled to cast such number of votes equal to the whole number of shares of common stock into which such shares of Series A Preferred Stock are convertible. The holders of record of the Series A Preferred Stock are entitled to nominate and elect two directors to the Company’s Board of Directors (the “Board Election Right”), at least one of whom is required to qualify as an “independent” director, as that term is used in applicable exchange listing rules. The Board Election Right with respect to the independent director will terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 40% of the original amount purchased by the Series A Purchaser. The Board Election Right with respect to the second director shall terminate on such date as the number of shares of Series A Preferred Stock then outstanding is less than 20% of the original amount purchased by the Series A Purchaser. The Company also granted the Series A Purchaser the right to have a board observer at meetings of the Company’s Board of Directors and committees thereof. To date, the Series A Purchaser has not exercised such director election or meeting observation rights.

 

For as long as at least 25% (or 12,406 shares) of the Series A Preferred Stock is outstanding, the Company may not, without the consent of holders of at least 60% of the then outstanding shares of Series A Preferred Stock, take certain actions, including but not limited to: (i) liquidate, dissolve, or wind up the business and affairs of the Company; (ii) amend, alter or repeal any provision of its charter or bylaws in a manner that adversely effects the rights of the Series A Preferred Stock; (iii) create or issue any capital stock that is equal to or senior to the Series A Preferred Stock with respect to preferences; (iv) create or issue any debt security, subject to certain exceptions; (v) pay off any debt obligation prior to its stated maturity date; or (vi) enter into any stockholders rights plan or similar arrangement or take other actions that may limit actions that holders of a majority of the Series A Preferred Stock can take under Section 203 of the Delaware General Corporation Law, as well as such other customary provisions protecting the rights of the holder of the Series A Preferred Stock, as are outlined in the Certificate of Designation.

 

The Series A Purchaser has the right to participate in any proposed issuance by the Company of its securities, subject to certain exceptions (the “Participation Right”). In the event the Series A Purchaser is not afforded the opportunity to exercise its Participation Right, the Series A Purchaser will have the right, but not the obligation, up to two times per calendar year, to acquire additional securities from the Company in such amount as is sufficient to maintain the Series A Purchaser’s ownership percentage in the Company, calculated immediately prior to such applicable financing, at a purchase price equal to the per share price of the Company’s securities in such applicable financing.

 

In connection with the Series A Private Placement, the Company entered into an investor’s rights agreement with the Series A Purchaser, pursuant to which the Company agreed to file a “resale” registration statement with the Securities and Exchange Commission (the “SEC”) covering the resale of all shares of common stock issuable upon conversion of the Series A Preferred Stock sold in the Series A Private Placement on or before February 14, 2015. The Company filed the registration statement on February 12, 2015 and the registration statement was declared effective by the SEC on February 17, 2015.

 

Common Stock

 

The Company’s authorized common stock consists of 100,000,000 shares, par value of $0.001 as of December 31, 2019 and December 31, 2018. There were 33,128,620 and 27,591,670 shares of common stock issued and outstanding as of December 31, 2019 and December 31, 2018, respectively.

 

On July 1, 2019, the Company entered into a securities purchase agreement with certain purchasers for the sale of an aggregate of 5,479,454 shares of the Company’s common stock along with warrants to purchase an aggregate of up to 5,479,454 additional shares of common stock, in a registered direct offering at a combined purchase price of $3.65 per share and warrant for aggregate gross sale proceeds of $20,000,007. The purchase agreement closed on July 2, 2019. The Company received net proceeds after issuance costs and expenses of $18,855,007. The warrants sold in the offering are exercisable for a period of two years commencing six months from the issuance date at an exercise price of $4.10 per share.

 

On January 24, 2018, the Company entered into a securities purchase agreement with the purchasers set forth on the signature pages thereto for the purchase and sale of an aggregate of 3,000,000 shares of the Company’s common stock, along with warrants to purchase an aggregate of up to 1,200,000 shares of common stock, in a registered direct offering at a combined purchase price of $10.00 per share and 0.4 of a warrant, for an aggregate purchase price of $30,000,000. The warrants associated with this purchase agreement expired, unexercised, in January 2019. The purchase agreement closed on January 29, 2018.

 

F-26

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 13 — Stock Warrants

 

The following table shows the various changes in warrants for the years ended:

 

   December 31,
2019
   December 31,
2018
   December 31,
2017
 
Warrants Outstanding, Beginning of Year   2,233,062    1,184,912    401,859 
Exercised During the Year       (113,850)   (250,009)
Issued During the Year   5,479,454    1,200,000    1,033,062 
Expired During the Year   (1,200,000)   (38,000)    
                
Warrants Outstanding, End of Year   6,512,516    2,233,062    1,184,912 

 

Of the outstanding warrants as of December 31, 2019, 1,033,062 expire on June 18, 2021 and the remainder expire on January 2, 2022. The weighted average remaining term of the warrants was 1.9 years. The weighted average exercise price was $4.56 per share. Of the outstanding warrants as of December 31, 2018, 1,200,000 expired on January 26, 2019 and the remainder expire on June 18, 2021. The weighted average remaining term of the warrants was 1.2 years. The weighted average exercise price was $8.61 per share. The outstanding warrants as of December 31, 2017 expire from March 21, 2018 to June 18, 2021. The weighted average remaining term of the warrants is 3.1 years. The weighted average exercise price is $6.44 per share.

 

During the year ended December 31, 2019 there were no warrants exercised. During the year ended December 31, 2018, a total of 96,350 warrants were exercised on a cashless basis resulting in the issuance of 66,710 shares and a total of 17,500 warrants were exercised for cash resulting in the issuance of 17,500 shares and proceeds of $39,373. During the year ended December 31, 2017 a total of 250,009 warrants were exercised on a cashless basis resulting in the issuance of 168,203 shares.

 

Management completed a derivative analysis on the 5,479,454 warrants issued in conjunction with our securities purchase agreement which closed on July 2, 2019 to determine whether or not they met the criteria under ASC 815-10-15-83 to trigger treatment as a derivative instrument. Management concluded that these warrants did not meet the criteria to be treated as a derivative instrument.

 

Note 14 — Stock Option Plans

 

The Company has the following Stock Option Plans (“Plans”) that allow for the granting of both incentive stock options or ISOs, which can result in potentially favorable tax treatment to the participant, and non-statutory stock options. The Company’s 2014 Equity Incentive Plan (the “2014 Plan”) was approved by the stockholders of the Company on June 26, 2014. The Company no longer issues any options under its prior 2007 and 2009 Plans. The 2014 Plan has an “evergreen provision”, under which the maximum number of shares of common stock that may be issued under the 2014 Plan was initially 1,000,000 and automatically increases each time the Company issues additional shares of common stock so that, initially, the total number of shares issuable thereunder at all times would be equal to 10% of the then outstanding shares of common stock. On June 13, 2018, the Company’s stockholders approved an amendment to the Company’s 2014 Equity Incentive Plan to increase the number of shares available for issuance thereunder to 20% of the outstanding shares of common stock. As of December 31, 2019, the authorized shares of common stock under the 2014 Plan, as amended, totaled 6,712,290.

 

The exercise price per share subject to an option is determined by the administrator, but in the case of an ISO must not be less than the fair market value of a share of our common stock on the date of grant and in the case of a non-statutory stock option must not be less than 100% of the fair market value of a share of our common stock on the date of grant.

 

Under the 2014 Plan, the Company may grant stock options, stock appreciation rights, performance awards of stock and/or cash, and stock awards of restricted stock.

 

F-27

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Options outstanding under the Stock Options Plans are as follows:

 

   2007
Plan
   2009
Plan
   2014
Plan
   Total 
Outstanding as of December 31, 2017   10,665    117,094    1,382,485    1,510,244 
Available for future issuance under plan           1,045,143    1,045,143 
Total authorized by plan   10,665    117,094    2,427,628    2,555,387 
                     
Outstanding as of December 31, 2018       110,771    1,435,750    1,546,521 
Available for future issuance under plan           4,082,584    4,082,584 
Totals authorized by plan       110,771    5,518,334    5,629,105 
                     
Outstanding as of December 31, 2019       85,498    1,298,093    1,383,591 
Available for future issuance under plan           5,329,309    5,329,309 
Totals authorized by plan       85,498    6,627,402    6,712,900 

 

The 2014 Plan gives the Board of Directors of the Company the ability to determine vesting periods for all stock incentives granted under the 2014 Plan and allows option terms to be up to ten years from the original grant date. Employees’ incentive stock options must vest at a minimum rate of 20% per year over a five-year period, commencing on the date of grant. Most vest ratably over four years commencing on the date of the option grant. In the case of directors, such options are granted annually and expire ten years after the date of their grant and vest ratably, on a monthly basis, over the next 12 months. Non-employee directors generally have vesting on a monthly basis, over the next 12 months. Advisors or consultants can have vesting range from 100% of the option grants vesting immediately to ratably, on a monthly basis, up to 48 months.

 

The following table summarizes stock option activity for the years ended December 31, 2019, 2018 and 2017:

 

       Weighted   Weighted
Average
 
   Number of
Options
   Average
Exercise Price
   Remaining Life
(years)
 
Outstanding at December 31, 2016   1,084,298   $4.76    7.57 
Granted   534,500    5.74      
Exercised   (63,187)   2.89      
Expired or Forfeited   (45,367)   8.30      
Outstanding at December 31, 2017   1,510,244   $5.04    7.58 
                
Granted   330,500    5.81      
Exercised   (97,264)   4.96      
Expired or Forfeited   (196,959)   6.11      
Outstanding at December 31, 2018   1,546,521   $5.11    7.19 
                
Granted   73,500    2.36      
Exercised             
Expired or Forfeited   (236,430)   6.21      
Outstanding at December 31, 2019   1,383,591   $4.77    6.25 

 

As of December 31, 2019, there were 1,015,019 options that were fully vested and exercisable at a weighted average exercise price of $4.63 per share. The weighted average remaining contractual term on the vested options is 5.44 years. The unvested balance of 368,572 options as of December 31, 2019 were exercisable at a weighted average exercise price of $5.17 per share. The weighted average remaining contractual term on the vested options was 8.5 years.

 

As of December 31, 2018, there were 936,406 options that were fully vested and exercisable at a weighted average exercise price of $4.66 per share. The weighted average remaining contractual term on the vested options is 6.1 years. The unvested balance of 610,115 options as of December 31, 2018 were exercisable at a weighted average exercise price of $5.80 per share. The weighted average remaining contractual term on the vested options was 8.9 years.

 

As of December 31, 2017, there were 797,861 options that were fully vested and exercisable at a weighted average exercise price of $4.65 per share. The weighted average remaining contractual term on the vested options is 6.4 years. The unvested balance of 712,383 options as of December 31, 2017 are exercisable at a weighted average exercise price of $5.48 per share. The weighted average remaining contractual term on the unvested options is 8.7 years.

 

The aggregate intrinsic value of the options outstanding as of December 31, 2019, 2018 and 2017 was approximately nil, $912,360 and $2,323,312, respectively.

 

F-28

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

  

The Black-Scholes-Merton option pricing model was used to estimate the fair value of share-based awards under FASB ASC Topic 718. The Black-Scholes-Merton option pricing model incorporates various and highly subjective assumptions, including expected term and share price volatility. For valuation purposes, stock option awards were categorized into two groups, stock option grants to employees and stock option grants to members of the Board of Directors.

 

The expected term of options granted was estimated to be the average of the vesting term, historical exercise and forfeiture rates, and the contractual life of the option. The share price volatility at the grant date is estimated using historical stock prices based upon the expected term of the options granted. The risk-free interest rate assumption is determined using the rates for U.S. Treasury zero-coupon bonds with maturities similar to those of the expected term of the award being valued. We have never paid cash dividends on our common stock and do not anticipate paying cash dividends on our common stock in the foreseeable future. Therefore, the assumed expected dividend yield is zero.

 

The following summary table shows the assumptions used to compute the fair value of stock options granted during 2019, 2018 and 2017 and their estimated value:

 

December 31,  2019   2018   2017 
Assumptions for Black-Scholes:               
Expected term in years   6.2 to 6.3    6.4 to 6.6    6.5 to 6.8 
Volatility   79.4% to 89.4%    108.9% to 119.4%    122.8% to 133.0% 
Risk-free interest rate   1.63% to 1.68%    2.95% to 3.08%    1.98% to 2.30% 
Expected annual dividends   None    None    None 
                
Value of options granted:               
Number of options granted   73,500    330,500    534,500 
Weighted average fair value per share  $1.71   $5.01   $5.24 
Fair value of options granted  $125,814   $1,655,390   $2,803,329 

 

Under FASB ASC Topic 718, the Company has elected to account for forfeitures as they occur. Stock-based compensation expense is recorded only for those awards expected to vest using an estimated forfeiture rate based on historical pre-vesting forfeiture data.

 

Unrecognized stock-based compensation expense was $1,616,503 as of December 31, 2019, relating to a total of 368,572 unvested stock options under the Company’s stock option plans. This stock-based compensation expense is expected to be recognized over a weighted average period of approximately 2.3 years.

 

F-29

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 15 – Right-of-Use Assets and Liabilities

 

On January 1, 2019, the Company adopted FASB ASU 2016-02, Leases (Topic 842). ASU 2016-02 requires lessees to recognize a right-of-use asset and lease liability in the balance sheet for all leases, including operating leases, with terms of more than twelve months. Upon adoption, we recognized an Operating Lease Right-of-Use Asset of $994,000, a current Operating Lease Liability of $533,000 and a long-term Operating Lease Liability of $461,000. We applied Topic 842 to all leases as of January 1, 2019 with comparable periods continuing to be reported under Topic 840. Upon adoption, we elected: (i) the package of practical expedients permitted under the transition guidance within the new standard, which among other things, allowed us to carry forward the historical lease classification and (ii) the practical expedient which allows us not to separate non-lease components from lease components, as they are not considered the predominate components in our contracts. The adoption of this standard does not have a significant impact on our consolidated results of operations or cash flows.

 

The Company has signed several lease agreements, with the largest being for its office and manufacturing facility in the Rochester, New York area under an operating lease that commenced October 3, 2015 and expires on October 3, 2020. This lease has an original five-year term with an option by the Company to renew for two additional three-year terms at pre-agreed to lease rates. As of January 2020, we have given formal notice of our intent to exercise the first of two renewal terms, extending our current lease expiration date to October 3, 2023. This renewal term is included in our right-to-use asset and liability as of December 31, 2019 as the renewal option for our current leased facility is reasonably certain. Operating lease costs under the operating leases totaled $572,767, $462,711 and $461,246 for the years ended December 31, 2019, 2018 and 2017, respectively.

  

Certain leases provide for increases in future minimum annual rental payments as defined in the lease agreements. The leases generally also include real estate taxes and common area maintenance charges in the annual rental payments. Short-term leases are leases having a term of twelve (12) months or less. The Company recognizes short-term leases on a straight-line basis and does not record a related lease asset or liability for such leases.

 

As none of our leases provide an implicit interest rate, we use our incremental borrowing rate to determine our discount rate at lease inception based upon the information available at commencement in determining the present value of lease payments. As of December 31, 2019, the weighted average discount rate was 4.5% and the weighted average remaining lease term was 3.7 years.

 

Future lease payments under operating leases as of December 31, 2019 were as follows:

 

2020  $608,698 
2021   599,190 
2022   587,286 
2023   489,405 
Total Future Lease Payments   2,284,579 
Less: Imputed Interest   (188,389)
Total Lease Liability Balance  $2,096,190 

 

F-30

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 16 — Employee Benefit Plans

 

The Company has a Section 401(k) Savings Plan which covers employees who meet certain age and length of service requirements. Effective July 1, 2018, the Company’s Plan was amended to include a 100% match by the Company on all eligible employee salary deferrals. The Company’s matching contribution is limited to 3% of covered employee’s annual salary. Total 401(k) matching expense for the years ended December 31, 2019, 2018 and 2017 totaled $142,414, $100,188 and $0, respectively.

 

Note 17 — Litigation

 

We are not currently involved in any actual or pending material legal proceedings or litigation, and we are not aware of any such proceedings contemplated by or against us or our property, except as follows:

 

On or about December 16, 2019, Throop, LLC (“Throop") filed a patent infringement lawsuit in the United States District Court for the Central District of California against the Company.  The complaint alleges that certain Vuzix products (which have yet to be sufficiently identified) infringe claims of U.S. Patent No. 7,035,897 and U.S. Patent No. 9,479,726.  Both patents expired on January 14, 2020.  The complaint purports to seek an injunction or payment of an ongoing royalty with respect to the patents, an award of damages to compensate for alleged past infringement, trebled damages, and an award of costs and attorney’s fees.  On March 6, 2020, before the Company filed a formal response to the complaint with the Court, Throop filed a voluntary dismissal without prejudice of the California complaint in response to the Company’s position that venue was improper. The Company denies that Throop is entitled to the relief requested and intends to vigorously defend itself against the claims asserted and any lawsuit related thereto brought against the Company going forward.

 

We were involved in the following litigation matters in 2019, which have been resolved:

  

On April 5, 2018, we filed a defamation lawsuit against Ricardo Antonio Pearson (a\k\a Richard Pearson) in the Supreme Court of the State of New York, County of New York. The Company’s complaint against Mr. Pearson alleged that he published false and defamatory articles about the Company. Vuzix sought damages in excess of $80 million, including punitive damages, and money damages. The lawsuit was moved from New York State Supreme Court, New York County, to the United States District Court, Southern District of New York, and Mr. Pearson filed a motion to dismiss the complaint for lack of jurisdiction, among other grounds. On or about November 8, 2019, the Court granted Mr. Pearson’s motion and dismissed the lawsuit on the basis that it lacked personal jurisdiction over him. In its decision, the Court noted that it was not making a determination or ruling on the actual merits of the lawsuit.

 

On or about October 27, 2018, Bob Glenn filed a shareholder derivative suit in the Supreme Court of the State of New York, County of Monroe against certain of the Company’s current and former directors and executive officers. The Company was named as a nominal defendant only. The complaint alleged breaches of fiduciary duty, unjust enrichment, and waste of corporate assets. The complaint also alleged that the Company and certain of its officers and directors made materially false and/or misleading statements and failed to disclose material adverse events about the Company’s business, operations and prospects in press releases and public filings. The complaint sought a declaration that the defendants breached and/or aided and abetted the breach of their fiduciary duties to the Company, determining and awarding damages, and directing the Company to reform and improve its corporate governance. Similar derivative suits were filed by Michael Washington and John Mayer on or about October 26, 2018 and October 29, 2018, and pursuant to the parties’ stipulation, the Court ordered the three lawsuits to be consolidated on January 29, 2019. Because the Company believed the allegations to be false and without merit, it filed a motion to dismiss the consolidated complaints on September 6, 2019. In response to the motion, the plaintiffs filed a consolidated amended complaint on October 3, 2019 in an attempt to bolster their allegations, but the causes of action remained substantially similar to those asserted in the original complaints. Because the Company found the claims in the consolidated amended complaint also to be baseless, it filed a motion to dismiss that pleading as well on November 4, 2019. Electing not to respond to the motion, the plaintiffs chose, instead, to voluntarily discontinue the action against the Company, and filed a stipulation to that effect with the Court on December 10, 2019. Accordingly, the Court marked the case disposed.

 

F-31

 

 

VUZIX CORPORATION

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Note 18 — Geographic and Other Financial Information (Unaudited)

 

Geographic Financial Information (Unaudited)

 

Geographical revenue information, based on ship-to destination of the customers for the three years ended December 31, 2019, 2018 and 2017 is as follows (in thousands):

 

By Continent and Region:

 

   Fiscal Year 
   2019   2018   2017 
   Revenue   % of Total   Revenue   % of Total   Revenue   % of Total 
North America  $2,781    42%  $3,550    44%  $1,687    30%
Asia-Pacific   2,058    31%   2,248    28%   1,927    35%
Europe   1,656    25%   2,183    27%   1,892    34%
Others   176    2%   113    1%   32    1%
Total Revenues  $6,671    100%  $8,094    100%  $5,538    100%

 

By Country:

 

    Fiscal Year  
    2019     2018     2017  
    Revenue     % of Total     Revenue     % of Total     Revenue     % of Total  
US   $ 2,673       40 %   $ 3,475       43 %   $ 1,618       29 %
China     984       15 %     17       0 %           0 %
Japan     873       13 %     1,261       16 %     1,340       24 %
Germany     778       12 %     492       6 %     526       9 %
Others     1,363       20 %     2,849       35 %     2,054       38 %
Total Revenues   $ 6,671       100 %   $ 8,094       100 %   $ 5,538       100 %

 

The Company does not maintain significant amounts of long-lived assets outside of the United States.

  

Note 19 — Quarterly Financial Information (Unaudited)

 

The following table summarizes our unaudited quarterly financial information for the periods shown below (in thousands, except per share data):

 

    Fiscal Year 2019  
    December 31,     September 30,     June 30,     March 31,  
Revenue   $ 1,953     $ 1,159     $ 2,186     $ 1,373  
Gross profit (loss)     (4,369 )     (231 )     152       40  
Net loss     (9,583 )     (5,477 )     (5,056 )     (6,360 )
Net loss per share, basic and diluted     (0.31 )     (0.18 )     (0.20 )     (0.25 )
Net loss attributable to common stockholders     (10,081 )     (5,967 )     (5,534 )     (6,826 )

 

 

   Fiscal Year 2018 
   December 31,   September 30,   June 30,   March 31, 
Revenue  $1,979   $1,923   $2,648   $1,544 
Gross profit (loss)   300    621    670    177 
Net loss   (5,564)   (4,798)   (6,148)   (5,366)
Net loss per share, basic and diluted   (0.22)   (0.19)   (0.24)   (0.22)
Net loss attributable to common stockholders   (6,033)   (5,260)   (6,599)   (5,804)

 

F-32

 

 

SIGNATURES

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized, on the 16th day of March, 2020.

 

  VUZIX CORPORATION  
   
  /s/ Paul Travers 
  Paul Travers 
  Chief Executive Officer 

 

POWER OF ATTORNEY

 

KNOW BY ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints jointly and severally, Paul Travers and Grant Russell, and each one of them, his or her attorneys-in-fact, each with the power of substitution, for him or her in any and all capacities, to sign any and all amendments to this Annual Report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each said attorneys-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated:

 

Signature   Title   Date
         
/s/ Paul Travers   President, Chief Executive Officer  

March 16, 2020

Paul Travers   and Director    
     (Principal Executive Officer)    
         
/s/ Grant Russell   Chief Financial Officer,  

March 16, 2020

Grant Russell   Executive Vice-President and Director    
    (Principal Financial and    
    Accounting Officer)    
         
/s/ Alexander Ruckdaeschel   Director  

March 16, 2020

Alexander Ruckdaeschel        
         
/s/ Edward Kay   Director  

March 16, 2020

Edward Kay        
         
/s/ Timothy Harned   Director  

March 16, 2020

Timothy Harned        

 

 87 

 

 

VUZIX CORPORATION

 

Schedule II — Valuation and Qualifying Accounts (in thousands)

 

Description  

Balance at

Beginning of

Period

   

Charged to

Expenses

    Deductions    

Balance at End

of Period

 
For the Year Ended December 31, 2017                                
Allowances deducted from assets                                
Doubtful Accounts   $     $ 29     $     $ 29  
Inventory     624       212 (a)           836  
Total allowances deducted from assets   $ 624     $ 241     $     $ 865  
                                 
For the Year Ended December 31, 2018                                
Allowances deducted from assets                                
Doubtful Accounts   $ 29     $ 7     $ (29 )   $ 7  
Inventory     836       303       (775 )(b)     364  
Total allowances deducted from assets   $ 865     $ 310     $ (804 )   $ 371  
                                 
For the Year Ended December 31, 2019                                
Allowances deducted from assets                                
Doubtful Accounts   $ 7     $ (7 )(c)   $     $  
Inventory     364       4,573       (149 )     4,788  
Total allowances deducted from assets   $ 371     $ 4,566     $ (149 )   $ 4,788  

 

  (a) Net change in inventory allowance, excluding iWear net realizable value write-down.
 

(b)

(c)

Deductions in 2018 primarily related to the disposal of raw components related to the discontinuance of our iWear product.

Recovery of amounts previously written off.

 

 88 

 

 

Exhibit Index

 

3.1(1)   Amended and Restated Certificate of Incorporation
3.2(1)   Amended and Restated Bylaws
3.3(2)   Amendment to Amended and Restated Certificate of Incorporation
3.4(3)   Amendment to Amended and Restated Certificate of Incorporation
3.5(4)   Certificate of Designation of Series A Preferred Stock
4.1*   Description of the Registrant’s Securities
10.1(5)**   Form of Indemnification Agreement by and between the registrant and each director and executive officer
10.2(5)**   Employment Agreement dated as of August 1, 2007 by and between the registrant and Paul Travers
10.3(5)**   Employment Agreement dated as of August 1, 2007 by and between the registrant and Grant Russell
10.4(6)   Shared Services Agreement, dated as of June 15, 2012, by and between Vuzix Corporation and TDG Acquisition Company LLC
10.5(6)   Reseller Agreement, dated as June 15, 2012, by and between Vuzix Corporation and TDG Acquisition Company LLC.
10.6(6)   Restrictive Covenants Agreement, dated as June 15, 2012, by and between Paul Travers and TDG Acquisition Company LLC
10.7(7)   2014 Equity Incentive Plan
10.8(4)   Series A Preferred Stock Purchase Agreement dated January 2, 2015
10.9(4)   Series A Preferred Stock Investor’s Rights Agreement, dated January 2, 2015
10.17 (11)   Form of Warrant
10.19 (12) †   Amendment No. 1 to agreements with TDG Acquisition Company, LLC
14.1(8)   Code of Ethics
21.1(9)   Subsidiaries
23.1*   Consent of Freed Maxick, CPAs, P.C.
31.1*   Certification of CEO as required by Rule 13a-14 or 15d-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes Oxley Act of 2002
31.2*   Certification of CFO as required by Rule 13a-14 or 15d-14 of the Securities Exchange Act of 1934, as adopted pursuant to Section 302 of the Sarbanes Oxley Act of 2002
32.1*   Section 1350 CEO Certification
32.2*   Section 1350 CFO Certification
101*   The following materials, formatted in XBRL (Extensible Business Reporting Language): (i) Consolidated Balance Sheets, (ii) Consolidated Statements of Income, (iii) Consolidated Statements of Cash Flows, and (iv) Notes to Consolidated Financial Statements, tagged as blocks of text

 

Confidential treatment granted as to certain portion

 

* Filed herewith.
** Indicates management contract or compensatory arrangement.

 

 89 

 

 

  (1) Filed as an exhibit to Amendment No. 3 to the Registration Statement on Form S-1 filed October 16, 2009 and incorporated herein by reference.

 

  (2) Filed as an exhibit to the Current Report on Form 8-K filed February 7, 2013 and incorporated herein by reference.

 

  (3) Filed as an exhibit to the Current Report on Form 8-K filed June 30, 2014 and incorporated herein by reference.

 

  (4) Filed as an exhibit to the Current Report on Form 8-K filed January 2, 2015 and incorporated herein by reference.

 

  (5) Filed as an exhibit to the S-1 filed July 2, 2009 and incorporated herein by reference.

  

  (6) Filed as an exhibit to the Current Report on Form 8-K filed June 21, 2012 and incorporated herein by reference.

  

  (7) Filed with Definitive Proxy Statement on April 30, 2014 and incorporated herein by reference.

  

  (8) Filed as exhibit to 10-K filed March 30, 2016 and incorporated herein by reference.

  

  (9) Filed as exhibit to S-1 filed December 21, 2012 and incorporated herein by reference.
     
  (10) Filed as exhibit to Form 8-K filed December 15, 2017 and incorporated herein by reference.
     
  (11) Filed as exhibit to Form 8-K filed January 26, 2018 and incorporated herein by reference.
     
  (12) Filed as exhibit to Form 8-K filed October 10, 2018 and incorporated herein by reference.

  

 90