Attached files

file filename
EX-32.1 - EXHIBIT 32.1 - TECHPRECISION CORPtm205261d1_ex32-1.htm
EX-31.2 - EXHIBIT 31.2 - TECHPRECISION CORPtm205261d1_ex31-2.htm
EX-31.1 - EXHIBIT 31.1 - TECHPRECISION CORPtm205261d1_ex31-1.htm

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

(Mark One)

x QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the quarterly period ended December 31, 2019

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

For the transition period from __________________ to __________________

 

Commission File Number: 000-51378

 

TechPrecision Corporation

(Exact name of registrant as specified in its charter)

 

Delaware   51-0539828
(State or other jurisdiction of   (I.R.S. Employer
incorporation or organization)   Identification No.)

 

1 Bella Drive    
Westminster, MA   01473
(Address of principal executive offices)   (Zip Code)
     
Registrant’s telephone number, including area code   (978) 874-0591

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of each class   Trading Symbol(s)   Name of each exchange on which registered
N/A   N/A   N/A

  

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. 

x Yes ¨ No

 

Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files).    

x Yes ¨ No

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer,” “accelerated filer,” “smaller reporting company”, and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ¨     Accelerated filer ¨
Non-accelerated filer x     Smaller reporting company x
Emerging growth company ¨        

  

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards pursuant to Section 13(a) of the Exchange Act.       ¨

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

¨ Yes x No

 

 

 

 

 

 

The number of shares outstanding of the registrant’s common stock as of February 10, 2020 was 29,254,594.

 

 

TABLE OF CONTENTS

 

 

    Page
PART I. FINANCIAL INFORMATION 3
ITEM 1. FINANCIAL STATEMENTS (UNAUDITED) 3
  CONDENSED CONSOLIDATED BALANCE SHEETS 3
  CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE (LOSS) INCOME 4
  CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY 5
  CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS 6
  NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS 7
ITEM 2. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS 14
ITEM 3. QUANTITATIVE AND QUALITATIVE DISCLOSURE ABOUT MARKET RISK 21
ITEM 4. CONTROLS AND PROCEDURES 21
PART II. OTHER INFORMATION 22
ITEM 1. LEGAL PROCEEDINGS 22
ITEM 6. EXHIBITS 22
  SIGNATURES 23

 

2

 

 

PART I

ITEM 1. FINANCIAL STATEMENTS

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED BALANCE SHEETS (Unaudited)

 

  

December 31,

2019

  

March 31,

2019

 
ASSETS          
Current assets:          
Cash and cash equivalents  $1,968,405   $2,036,646 
Accounts receivable   752,984    1,010,443 
Contract assets   3,800,928    4,390,832 
Inventories   1,512,082    1,240,315 
Other current assets   794,387    498,059 
Total current assets   8,828,786    9,176,295 
Property, plant and equipment, net   4,347,796    4,860,609 
Deferred income taxes   2,119,439    2,004,346 
Other noncurrent assets, net   43,913    6,233 
Total assets  $15,339,934   $16,047,483 
           
LIABILITIES AND STOCKHOLDERS’ EQUITY:          
Current liabilities:          
Accounts payable  $470,619   $609,082 
Accrued expenses   981,255    753,499 
Contract liabilities   828,762    740,947 
Current portion of long-term debt   1,167,518    822,105 
Total current liabilities   3,448,154    2,925,633 
Long-term debt   2,481,948    3,410,542 
Commitments and contingent liabilities (Note 13)          
Stockholders’ Equity:          
Common stock - par value $.0001 per share, 90,000,000 shares authorized,
29,254,594 and 29,234,594 shares issued and outstanding,
at December 31, 2019 and March 31, 2019
   2,925    2,923 
Additional paid in capital   8,781,971    8,693,106 
Accumulated other comprehensive income   21,611    21,940 
Retained earnings   603,325    993,339 
Total stockholders’ equity   9,409,832    9,711,308 
Total liabilities and stockholders’ equity  $15,339,934   $16,047,483 

 

See accompanying notes to the condensed consolidated financial statements.

 

3

 

 

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS AND COMPREHENSIVE (LOSS) INCOME (unaudited)

 

   Three Months Ended
December 31,
   Nine Months Ended
December 31,
 
   2019   2018   2019   2018 
Net sales  $3,667,276   $4,270,396   $11,075,620   $11,990,404 
Cost of sales   3,352,962    3,299,166    9,238,287    8,871,550 
  Gross profit   314,314    971,230    1,837,333    3,118,854 
Selling, general and administrative   662,675    631,783    2,145,055    2,113,285 
(Loss) income from operations   (348,361)   339,447    (307,722)   1,005,569 
Other income   185    1,590    21,063    8,605 
Interest expense   (69,328)   (88,314)   (218,447)   (273,948)
  Total other expense, net   (69,143)   (86,724)   (197,384)   (265,343)
(Loss) income before income taxes   (417,504)   252,723    (505,106)   740,226 
Income tax (benefit) expense   (97,734)   34,701    (115,092)   177,104 
Net (loss) income  $(319,770)  $218,022   $(390,014)  $563,122 
Other comprehensive (loss) income, before tax:                    
Foreign currency translation adjustments  $9   $18   $(329)  $(2,402)
   Other comprehensive (loss) income, net of tax  $9   $18   $(329)  $(2,402)
Comprehensive (loss) income  $(319,761)  $218,040   $(390,343)  $560,720 
Net (loss) income per share basic  $(0.01)  $0.01   $(0.01)  $0.02 
Net (loss) income per share diluted  $(0.01)  $0.01   $(0.01)  $0.02 
Weighted average number of shares outstanding:                         
Basic   29,254,594    28,858,560    29,254,230    28,835,957 
Diluted   29,254,594    30,427,218    29,254,230    30,158,509 

 

See accompanying notes to the condensed consolidated financial statements.

 

4

 

 

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY (unaudited)

 

   Common
Stock Outstanding
   Par
Value
   Additional
Paid in
Capital
   Accumulated
Other
Comprehensive
Income
   Retained
Earnings
(Accumulated
Deficit)
   Total
Stockholders’
Equity
 
Balance 3/31/2018   28,824,593   $2,882   $8,561,995   $24,236   $(576,617)  $8,012,496 
Effect of adoption of ASC 606                       19,647    19,647 
Effect of adoption of ASU 2016-16                       449,633    449,633 
Stock based compensation             24,930              24,930 
Net income                       164,385    164,385 
Foreign currency translation adjustment                  (1,911)        (1,911)
Balance 6/30/2018   28,824,593   $2,882   $8,586,925   $22,325   $57,048   $8,669,180 
Stock based compensation             71,588              71,588 
Net income                       180,715    180,715 
Foreign currency translation adjustment                  (509)        (509)
Balance 9/30/2018   28,824,593   $2,882   $8,658,513   $21,816   $237,763   $8,920,974 
Shares issued under long-term incentive plan   125,000    13    122,487              122,500 
Non-vested restricted stock             (112,291)             (112,291)
Net income                       218,022    218,022 
Foreign currency translation adjustment                  18         18 
Balance 12/31/2018   28,949,593   $2,895   $8,668,709   $21,834   $455,785   $9,149,223 
                               
Balance 3/31/2019   29,234,594   $2,923   $8,693,106   $21,940   $993,339   $9,711,308 
Non-vested restricted stock             30,625              30,625 
Shares issued under long-term incentive plan   20,000    2    7,198              7,200 
Net income                       220,777    220,777 
Foreign currency translation adjustment                  (179)        (179)
Balance 6/30/2019   29,254,594   $2,925   $8,730,929   $21,761   $1,214,116   9,969,731 
Non-vested restricted stock             30,625              30,625 
Net loss                       (291,021)   (291,021)
Foreign currency translation adjustment                  (159)        (159)
Balance 9/30/2019   29,254,594   $2,925   $8,761,554   $21,602   $923,095   $9,709,176 
Non-vested restricted stock             20,417              20,417 
Net loss                       (319,770)   (319,770)
Foreign currency translation adjustment                  9         9 
Balance 12/31/2019   29,254,594   $2,925   $8,781,971   $21,611   $603,325   $9,409,832 

 

See accompanying notes to the condensed consolidated financial statements.

 

5

 

 

TECHPRECISION CORPORATION

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS (unaudited)

 

   Nine Months Ended December 31, 
   2019   2018 
CASH FLOWS FROM OPERATING ACTIVITIES          
Net (loss) income  $(390,014)  $563,122 
Adjustments to reconcile net (loss) income to net cash provided by operating activities:          
Depreciation   548,038    558,571 
Amortization of debt issue costs   31,280    43,638 
Stock based compensation expense   81,667    106,727 
Change in contract loss provision   216,039    24,541 
Deferred income taxes   (115,092)   177,104 
Changes in operating assets and liabilities:          
Accounts receivable   257,459    1,299,194 
Inventories   (271,767)   (1,004,145)
Contract assets   589,904    (5,912,297)
Other current assets   (296,328)   (14,174)
Other noncurrent assets   (9,419)   (7,245)
Accounts payable   (138,463)   279,893 
Accrued expenses   18,282    202,860 
Contract liabilities   87,815    3,803,087 
Net cash provided by operating activities   609,401    120,876 
CASH FLOWS FROM INVESTING ACTIVITIES          
Purchases of property, plant and equipment   (35,225)   (402,880)
Net cash used in investing activities   (35,225)   (402,880)
CASH FLOWS FROM FINANCING ACTIVITIES          
Deferred loan costs   (32,209)   -- 
Repayment of long-term debt   (610,515)   (569,809)
Net cash used in financing activities   (642,724)   (569,809)
Effect of exchange rate on cash and cash equivalents   307    628 
    Net decrease in cash and cash equivalents   (68,241)   (851,185)
Cash and cash equivalents, beginning of period   2,036,646    2,689,110 
Cash and cash equivalents, end of period  $1,968,405   $1,837,925 
SUPPLEMENTAL DISCLOSURES OF CASH FLOWS INFORMATION          
Cash paid during the year for:          
Interest  $187,083   $230,310 
Income taxes  $--   $-- 

 

See accompanying notes to the condensed consolidated financial statements.

 

6

 

 

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

 

NOTE 1 - DESCRIPTION OF BUSINESS

 

TechPrecision Corporation, or TechPrecision, is a Delaware corporation organized in February 2005 under the name Lounsberry Holdings II, Inc. The name was changed to TechPrecision Corporation on March 6, 2006. TechPrecision is the parent company of Ranor, Inc., or Ranor, a Delaware corporation and Wuxi Critical Mechanical Components Co., Ltd., or WCMC, a wholly foreign owned enterprise. TechPrecision, Ranor, and WCMC are collectively referred to as the “Company”, “we”, “us” or “our”.

 

We manufacture large scale fabricated and machined precision metal components and equipment. These products are used in a variety of markets including defense and aerospace, nuclear, medical, and precision industrial. We consider our business to consist of one segment - metal fabrication and precision machining. All of our operations and customers are located in the United States.

 

NOTE 2 - BASIS OF PRESENTATION AND SIGNIFICANT ACCOUNTING POLICIES

 

Basis of Presentation and Consolidation - The accompanying condensed consolidated financial statements include the accounts of TechPrecision, Ranor and WCMC. Intercompany transactions and balances have been eliminated in consolidation. The accompanying condensed consolidated balance sheets as of December 31, 2019 and March 31, 2019, the condensed consolidated statements of operations and comprehensive (loss) income for the three and nine months ended December 31, 2019 and 2018, the condensed consolidated statements of stockholders’ equity for each of the three months ended June 30, 2019 and 2018, September 30, 2019 and 2018, and December 31, 2019 and 2018, and the condensed consolidated statements of cash flows for the nine months ended December 31, 2019 and 2018 are unaudited, but, in the opinion of management, include all adjustments that are necessary for a fair presentation of our financial statements for interim periods in accordance with U.S. Generally Accepted Accounting Principles, or U.S. GAAP. All adjustments are of a normal, recurring nature, except as otherwise disclosed. The results of operations for an interim period are not necessarily indicative of the results of operations to be expected for the fiscal year.

 

These notes to the condensed consolidated financial statements have been prepared pursuant to the rules and regulations of the Securities and Exchange Commission, or the SEC, for Quarterly Reports on Form 10-Q. Certain information and disclosures normally included in financial statements prepared in accordance with U.S. GAAP have been condensed or omitted pursuant to such rules and regulations. These unaudited financial statements and related notes should be read in conjunction with the consolidated financial statements included with our Annual Report on Form 10-K for the fiscal year ended March 31, 2019, or the 2019 Form 10-K, filed with the SEC on June 27, 2019.

 

Use of Estimates in the Preparation of Financial Statements - In preparing the condensed consolidated financial statements in conformity with U.S. GAAP, management is required to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the condensed consolidated financial statements and revenues and expenses during the reported period. We continually evaluate our estimates, including those related to contract accounting, accounts receivable, inventories, recovery of long-lived assets, income taxes and the valuation of equity transactions. We base our estimates on historical and current experiences and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could differ from those estimates.

 

NOTE 3 - ACCOUNTING STANDARDS UPDATE

 

New Accounting Standards Recently Issued

 

In December, 2019, the Financial Accounting Standards Board, or FASB issued Accounting Standards Update (ASU) No. 2019-12, Income Taxes (Topic 740): Simplifying the Accounting for Income Taxes, expected to reduce cost and complexity related to the accounting for income taxes. This ASU removes specific exceptions to the general principles in Topic 740 under U.S. GAAP and eliminates the need to analyze certain exceptions in a given period. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2020. The Company is currently evaluating the amendments in this update to determine the impact it may have on its financial statements and disclosures.

 

New Accounting Standards Recently Adopted

 

On April 1, 2019, we adopted Accounting Standards Update (ASU) 2016-02, Leases, or Accounting Standards Codification 842 (ASC 842) and all the related amendments using the modified retrospective method. The comparative information has not been restated and continues to be reported under the lease accounting standard in effect for those periods.

 

7

 

 

The most significant effects of the standard on our condensed consolidated financial statements are (1) the recognition of new right-of-use asset and lease liability on our condensed consolidated balance sheet for an operating lease, and (2) new disclosures about our leasing activities (see Note 12). The adoption did not result in a cumulative-effect adjustment to retained earnings. The new standard did not have a material impact on our results of operations, balance sheet or cash flows.

 

We elected the practical expedients permitted under the transition guidance of the new standard that retained the lease classification and initial direct costs for any leases that existed prior to adoption of the standard. The new lease standard requires all leases to be reported on the balance sheet as right-of-use assets and lease obligations.

 

We also adopted the following ASUs effective April 1, 2019, none of which had a material impact to our financial statements or financial statement disclosures: ASU 2018-13 Fair Value Measurement - Changes to the Disclosure Requirements for Fair Value Measurement, ASU 2018-07, Compensation - Stock Compensation (Topic 718) Improvements to Nonemployee Share-Based Payment Accounting, and ASU 2018-02 Reclassification of Certain Tax Effects from Accumulated Other Comprehensive Income.

 

NOTE 4 - REVENUE

 

The Company generates its revenues from performance obligations completed under contracts with customers in three main market sectors: defense, energy and precision industrial. The period over which the Company performs is generally less than one year. The Company invoices and receives related payments based on performance progress not less frequently than monthly.

 

Revenue is recognized over-time or at a point-in-time given the terms and conditions of the related contracts. The Company utilizes an inputs methodology based on estimated labor hours to measure performance progress. This model best depicts the transfer of control to the customer.

 

The Company’s contract portfolio is comprised of fixed-price contracts and provide for product type sales only. The following table presents net sales on a disaggregated basis by market and contract type:

 

Net Sales by market  Defense   Energy   Industrial   Totals 
Three months ended December 31, 2019  $3,200,671   $373,357   $93,248   $3,667,276 
Three months ended December 31, 2018  $4,196,944   $33,790   $39,662   $4,270,396 
Nine months ended December 31, 2019  $9,725,635   $450,914   $899,071   $11,075,620 
Nine months ended December 31, 2018  $11,507,854   $267,794   $214,756   $11,990,404 

 

Net Sales by contract type  Over-time   Point-in-time   Totals 
Three months ended December 31, 2019  $3,439,367   $227,909   $3,667,276 
Three months ended December 31, 2018  $4,086,713   $183,683   $4,270,396 
Nine months ended December 31, 2019  $9,104,395   $1,971,225   $11,075,620 
Nine months ended December 31, 2018  $11,314,599   $675,805   $11,990,404 

 

As of December 31, 2019, the Company had $17.0 million of remaining performance obligations, of which $13.6 million were less than 50% complete. We would expect to recognize all of the remaining performance obligations as revenue within the next 24 months.

 

We are dependent each year on a small number of customers who generate a significant portion of our business. These customers change from year to year. The following table lists customers who accounted for more than 10% of our net sales:  

 

   Three months ended December 31, 2019   Three months ended December 31, 2018   Nine months ended December 31, 2019   Nine months ended December 31, 2018 
Customer  Amount   Percent   Amount   Percent   Amount   Percent   Amount   Percent 
A  $1,215,737    33%  $1,124,294    26%  $2,320,485    21%  $2,117,342    18%
B  $727,084    20%  $1,008,264    24%  $1,825,213    16%  $2,609,284    22%
C  $404,062    11%  $*      *%  $1,790,311    16%  $ *      *%
D  $*       *%  $  *       *%  $1,148,242    10%  $*       *%
E  $*      *%  $1,183,208    28%  $1,136,146    10%  $4,293,047    36%

*Less than 10% of total 

 

On our condensed consolidated balance sheet, contract assets and contract liabilities are reported in a net position on a contract-by-contract basis at the end of each reporting period. In fiscal 2020, we recognized revenue of $0.6 million related to our contract liabilities at March 31, 2019. At December 31, 2019 contract assets consisted of the following:

 

8

 

 

Contract assets  Unbilled   Less: Progress payments   Total 
December 31, 2019  $8,870,887   $5,069,959   $3,800,928 
March 31, 2019  $9,324,361   $4,933,529   $4,390,832 

 

NOTE 5 - INCOME TAXES

 

We account for income taxes under the provisions of FASB ASC 740, Income Taxes.  The tax provision for interim periods is determined using the estimated annual effective consolidated tax rate, based on the current estimate of full-year profit or loss before taxes, adjusted for the impact of discrete quarterly items. We recorded an income tax benefit of $115,092 for the nine months ended December 31, 2019. Income tax expense was $177,104 for the nine months ended December 31, 2018. The Company's effective tax rates for the nine months ended December 31, 2019 and 2018 were 22.8% and 23.9%, respectively.

 

The valuation allowance on deferred tax assets was approximately $1.7 million at December 31, 2019. We believe that it is more likely than not that the benefit from certain state and foreign NOL carryforwards and other deferred tax assets will not be realized. In the event future taxable income is below management’s estimates or is generated in tax jurisdictions different than projected, the Company could be required to increase the valuation allowance for deferred tax assets. This would result in an increase in the Company’s effective tax rate.

 

NOTE 6 - EARNINGS PER SHARE

 

Basic earnings per share, or EPS, is computed by dividing reported earnings available to stockholders by the weighted average number of shares outstanding. Diluted EPS also includes the effect of stock options that would be dilutive. The following table provides a reconciliation of the numerators and denominators reflected in the basic and diluted earnings per share computations, as required under FASB ASC 260.

 

   Three months ended
December 31, 2019
   Three months ended
December 31, 2018
   Nine months ended
December 31, 2019
   Nine months ended
December 31, 2018
 
Basic EPS:                    
Net (loss) income  $(319,770)  $218,022   $(390,014)  $563,122 
Weighted average shares   29,254,594    28,858,560    29,254,230    28,835,957 
Basic (loss) income per share  $(0.01)  $0.01   $(0.01)  $0.02 
Diluted EPS:                    
Net (loss) income  $(319,770)  $218,022   $(390,014)  $563,122 
Dilutive effect of stock options   --    1,568,658    --    1,322,552 
Diluted weighted average shares   29,254,594    30,427,218    29,254,230    30,158,509 
Diluted (loss) income per share  $(0.01)  $0.01   $(0.01)  $0.02 

 

All potential common stock equivalents that have an anti-dilutive effect (i.e. those that increase income per share or decrease loss per share) are excluded from the calculation of diluted EPS. For the three and nine months ended December 31, 2019, there were 2,967,000 of potentially anti-dilutive stock options, none of which were included in the EPS calculations above. For the three and nine months ended December 31, 2018, there were 171,000 and 642,668, respectively, of potential common stock equivalents that were out-of-the-money and were not included in the EPS calculations above.

 

NOTE 7 - STOCK-BASED COMPENSATION

 

The TechPrecision Corporation 2016 Equity Incentive Plan, or the 2016 Plan, authorizes the award of incentive and non-qualified stock options, restricted stock awards, restricted stock units, and performance awards to employees, directors, consultants, and other individuals who provide services to TechPrecision or its affiliates. The purpose of the 2016 Plan is to: (a) enable TechPrecision and its affiliated companies to recruit and retain highly qualified employees, directors and consultants; (b) provide those employees, directors and consultants with an incentive for productivity; and (c) provide those employees, directors and consultants with an opportunity to share in the growth and value of the Company. Subject to adjustment as provided in the 2016 Plan, the maximum number of shares of common stock that may be issued with respect to awards under the 2016 Plan is 5,000,000 shares (inclusive of awards issued under the 2006 Long-Term Incentive Plan, or the 2006 Plan, that remained outstanding as of the effective date of the 2016 Plan). Shares of our common stock subject to awards that expire unexercised or are otherwise forfeited shall again be available for awards under the 2016 Plan.

 

The fair value of the options we grant is estimated using the Black-Scholes option-pricing model based on the closing stock prices at the grant date and the weighted average assumptions specific to the underlying options. Expected volatility assumptions are based on the historical volatility of our common stock. The average dividend yield over the historical period for which volatility is computed is zero. The risk-free interest rate is selected based upon yields of U.S. Treasury issues. We used the simplified method for all grants to estimate the expected life of the option. We assume that stock options will be exercised evenly over the period from vesting until the awards expire. We account for award forfeitures as they occur. As such, the assumed period for each vesting tranche is computed separately and then averaged together to determine the expected term for the award. At December 31, 2019, there were 1,573,000 shares available for grant under the 2016 Plan.

 

9

 

 

The following table summarizes information about options for the most recently completed periods:  

 

   Number Of  

Weighted

Average

  

Aggregate

Intrinsic

  

Weighted

Average

Remaining

Contractual Life

 
   Options   Exercise Price   Value   (in years) 
Outstanding at 3/31/2018   3,394,668   $0.417   $698,200    6.72 
Granted   150,000   $0.800           
Exercised   (365,000)  $0.271           
Canceled   (241,668)  $1.226           
Outstanding at 3/31/2019   2,938,000   $0.416   $1,869,200    6.74 
Exercised   (20,000)  $0.360           
Canceled   (1,000)   --           
Outstanding at 12/31/2019   2,917,000   $0.416   $3,888,325    6.32 
Vested or expected to vest at 12/31/2019   2,917,000   $0.416   $3,888,325    6.32 
Exercisable and vested at 12/31/2019   2,917,000   $0.416   $3,888,325    6.32 

 

The aggregate intrinsic value in the table above represents the total pre-tax intrinsic value (the difference between the closing stock price on the last trading day of the quarter and the exercise price, multiplied by the number of in-the-money options) that would have been received by the option holders had all option holders exercised their options on December 31, 2019. This amount changes based on the fair market value of the Company’s common stock. All of the options are vested and exercisable and the maximum contractual term is ten years for option grants.

 

On April 5, 2019, the Company issued 20,000 shares of the Company’s common stock, par value $0.0001 per share, pursuant to an option award exercised on March 20, 2019, granted previously under the Company’s 2016 Long-Term Incentive Plan. At December 31, 2019, there was no remaining unrecognized compensation cost related to stock options. Other information relating to stock options outstanding at December 31, 2019 is as follows: 

 

Range of Exercise Prices:  

Options

Outstanding

  

Weighted

Average

Remaining

Contractual

Term

  

Weighted

Average

Exercise Price

  

Options

Exercisable

  

Weighted

Average

Exercise Price

 
$0.01-$1.00    2,820,000    6.84   $0.37    2,820,000   $0.37 
$1.01-$1.96    97,000    1.43   $1.84    97,000   $1.84 
Totals    2,917,000              2,917,000      

 

Restricted Stock Awards

 

On December 7, 2018 we granted a total of 100,000 shares of restricted stock under the 2016 Plan to the board of directors and a total of 25,000 shares of restricted stock to our executive officers. The stock-based compensation expense of $122,500 for service-based restricted stock was measured at fair value on the date of grant based on the number of shares expected to vest and the quoted market price of the Company’s common stock. On December 7, 2019, the shares of restricted stock fully vested and ceased to be subject to forfeiture, one year following the grant date. The aggregate fair value of the restricted stock expensed during the nine months ended December 31, 2019 was $81,667.

 

NOTE 8 - CONCENTRATION OF CREDIT RISK

 

We maintain bank account balances, which, at times, may exceed insured limits. We have not experienced any losses with these accounts and believe that we are not exposed to any significant credit risk on cash.

10

 

 

At December 31, 2019, there were trade accounts receivable balances outstanding from eight customers comprising 98% of the total trade receivables balance. The following table sets forth information as to trade accounts receivable from customers who accounted for more than 10% of our accounts receivable balance as of: 

    December 31, 2019     March 31, 2019  
Customer   Dollars     Percent     Dollars      Percent    
A   $ 183,821       24 %   $ 246,019       24 %
B   $ 149,500       20 %   $ *         * %
C   $ 132,453       18 %   $ *         * %
D   $ 81,780       11 %   $ *         * %
E   $ 78,430       10 %   $ 339,032       34 %
F   $ *         * %   $ 244,500       24 %

 

*less than 10% of total

 

NOTE 9 - OTHER CURRENT ASSETS

   December 31,
2019
   March 31, 2019 
Payments advanced to suppliers  $389,711   $133,861 
Prepaid insurance   273,034    203,601 
Prepaid subscriptions   28,021    27,096 
Prepaid taxes   35,207    31,707 
Refundable AMT credits   60,841    60,841 
Employee advances   628    15,380 
Other   6,945    25,573 
Total  $794,387   $498,059 

 

NOTE 10 - ACCRUED EXPENSES 

   December 31,
2019
   March 31, 2019 
Accrued compensation  $339,262   $284,651 
Provision for contract losses   273,831    57,792 
Accrued professional fees   276,383    267,309 
Accrued project costs   50,923    118,929 
Other   40,856    24,818 
Total  $981,255   $753,499 

 

Accrued compensation includes amounts for bonuses, payroll and vacation and holiday pay. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in the provision are recorded in cost of sales. The provision for contract losses has increased by $0.2 million since March 31, 2019. Accrued project costs are estimates for certain project expenses during the reporting period.

 

NOTE 11 - DEBT 

   December 31,
2019
   March 31, 2019 
Berkshire Term Loan due December 2021  $2,588,183   $2,656,985 
People’s Equipment Loan Facility due April 2021   1,073,373    1,606,953 
Obligation under finance lease   25,279    33,411 
Total debt  $3,686,835   $4,297,349 
Less: debt issue costs unamortized  $37,369   $64,702 
Total debt, net  $3,649,466   $4,232,647 
Less: Current portion of long-term debt  $1,167,518   $822,105 
Total long-term debt, net  $2,481,948   $3,410,542 

 

11 

 

 

Berkshire Term Loan Facility

 

On December 21, 2016, TechPrecision, through Ranor, closed on a Loan Agreement, or the Berkshire Loan Agreement, with Berkshire Bank. Pursuant to the Berkshire Loan Agreement, Berkshire Bank made a term loan to Ranor in the amount of $2,850,000, or the Term Loan, and made available to Ranor a revolving line of credit in the amount of $1,000,000, or the Revolver Loan, and together with  the Term Loan, collectively, the Berkshire Loans.  The Berkshire Loans are secured by a first lien on all personal and real property of Ranor.  Payments on the Term Loan began on January 20, 2017 and will be made in 60 monthly installments of $19,260 each, inclusive of interest at a fixed rate of 5.21% per annum, with all outstanding principal and accrued interest due and payable on December 20, 2021.  A prepayment penalty will apply during the loan term but will not apply if a prepayment is made from either casualty loss insurance proceeds or a condemnation award applicable to any collateral or if a full prepayment is made during the 45-day period immediately preceding the maturity date.  Advances under the Revolver Loan were subject to a borrowing base equal to the lesser of (A) $1,000,000 and (B) the sum of (i) 80% of eligible accounts receivable, and (ii) the lesser of (a) 25% of eligible raw material inventory and (b) $250,000.  Advances made under the Revolver Loan bore interest at a variable rate equal to the one-month LIBOR plus 275 basis points.  Interest-only payments on advances made under the Revolver Loan will be payable monthly in arrears. Ranor’s obligations under the Berkshire Loan Agreement are guaranteed by TechPrecision. The Company pays, as consideration for the bank’s commitment to make advances under the Revolver Loan, a nonrefundable commitment fee equal to 0.25% per annum on the average daily difference between the amount of $1,000,000 and the aggregate amount of all advances made under the Revolver Loan as of each quarterly period.

 

On December 19, 2018, the Company entered into a Second Modification to Loan Agreement and First Modification and Allonge to Promissory Note with Berkshire Bank, or the Modification. The Modification amended and modified the Berkshire Loan Agreement, and the related Promissory Note dated December 20, 2016 made by Ranor in favor of Berkshire in the stated principal amount of $1,000,000. Under the terms of the Berkshire Loan Agreement and the related promissory note, Ranor was entitled to borrow up to $1,000,000 on a revolving basis. As of the date of the Modification, there were no amounts outstanding under the Revolver Loan. The maturity date of the Revolver Loan was originally December 20, 2018. Under the Modification, the maturity date of the Revolver Loan was extended until December 20, 2020. The Company paid $7,245 of expenses related to the execution of the Modification, which are classified as other noncurrent assets.

 

On December 23, 2019, TechPrecision, through Ranor, entered into a Third Modification to Loan Agreement, or the Third Modification, and an Amended and Restated Promissory Note with Berkshire Bank. Under the Third Modification, Ranor and Berkshire agreed to increase the maximum principal amount available under the Revolver Loan from $1,000,000 to $3,000,000. Advances under the Revolver Loan are now subject to the lesser of (a) $3,000,000 or (b) the sum of (i) 80% of eligible accounts receivable, plus (ii) the lesser of (x) 25% of Eligible Raw Material Inventory, and (y) $250,000, plus (iii) 50% of the Appraised Value of the Eligible Equipment. The loan agreement is available for refinancing existing indebtedness and for working capital and general corporate purposes. Additionally, the parties agreed to lower the interest rate on advances made under the Revolver Loan based on LIBOR. Prior to the Third Modification, interest accrued on advances made under the Revolver Loan at a variable rate equal to the one-month LIBOR plus 275 basis points.  Under the Third Modification, interest accrues on such advances at a variable rate equal to the one-month LIBOR plus 225 basis points.  The Third Modification contains customary LIBOR replacement provisions. 

 

The Third Modification also excludes the balance of the Revolver Loan from the Loan-to-Value Ratio covenant calculations and excludes the Company’s anticipated repayment of its obligations to People’s Capital and Leasing Corp from the calculation of the financial covenants. If the Company repays People’s in full in January 2020, the debt service requirements related to the People’s obligations will be eliminated for purposes of the Debt Service Coverage Ratio covenant calculations and the debt service related to the People’s financing will be eliminated from covenant testing starting with the December 31, 2019 covenant test. The Company paid $41,628 in costs related to the execution of the Third Modification, which are classified as other noncurrent assets. The maturity date of the Revolver Loan remains December 20, 2020, and all other material terms of the Loan Agreement and Line of Credit Note were unchanged.

 

The Berkshire Loans may be accelerated upon the occurrence of an “Event of Default” (as defined in the Berkshire Loan Agreement).  Events of Default include (i) the failure to pay any monthly installment payment before the tenth day following the due date of such payment; (ii) the failure of Ranor or TechPrecision to observe, perform or pay any obligations under the Berkshire Loan Agreement or any other obligation to Berkshire; (iii) the failure of Ranor or TechPrecision to pay any indebtedness in excess of $100,000 (other than the Berkshire Loans) when due; (iv) any representation or warranty of Ranor or TechPrecision in the Berkshire Loan Agreement and related documents, or the Loan Documents, being proven to have been incorrect, in any material respect, when made; (v) the failure of Ranor to discharge any attachment, levy or distraint on its property; (vi) any default by Ranor or TechPrecision under any of the collateral security documents executed in connection with the Berkshire Loan Agreement past any applicable grace period; (vii) the failure of Ranor or TechPrecision to file or pay taxes when due, unless such taxes are being contested in a manner permitted under the Loan Documents; (viii) a change in ownership or control of Ranor or change in management of Ranor where either the chief executive officer or chief financial officer as of December 21, 2016 is replaced without Berkshire Bank’s prior consent; (ix) Ranor or TechPrecision ceasing to do business as a going concern, making an assignment for the benefit of creditors, or commencing a bankruptcy or other similar insolvency proceeding; and (x) the entry of a judgment against Ranor or TechPrecision in excess of $150,000. Some of the Events of Default are subject to certain cure periods. Subject to the lapse of any applicable cure period, a default under the Berkshire Loans could cause the acceleration of all outstanding obligations under the Berkshire Loans.

 

12 

 

 

Pursuant to the Berkshire Loan Agreement, the Company covenants to cause its balance sheet leverage to be less than or equal to 2.50 to 1.00 for the fiscal year ending March 31, 2019 and each fiscal year end thereafter. The Berkshire Loan Agreement also contains a covenant whereby the Company is required to maintain a debt service coverage ratio, or DSCR, of at least 1.2 to 1.0 during the term of the Berkshire Loans.  The DSCR is measured at the end of each fiscal quarter of the Company.  The Company was in compliance with all of the financial covenants at December 31, 2019 and March 31, 2019. 

 

Also, Ranor’s annual capital expenditures cannot exceed $1,500,000 for the fiscal year ending March 31, 2020 and each fiscal year thereafter.  The Berkshire Loan Agreement contains an additional covenant whereby Ranor is required to maintain a loan to value ratio of not greater than 0.75 to 1.00, to be measured by appraisal not more frequently than one time during each 365-day period.

 

There were no amounts outstanding under the Revolver Loan at December 31, 2019 and March 31, 2019. Other unamortized debt issue costs at December 31, 2019 and March 31, 2019 were $23,549 and $32,982, respectively.

 

People’s Equipment Loan Facility

 

On April 26, 2016, TechPrecision, through Ranor, executed and closed a Master Loan and Security Agreement No. 4180, as supplemented with Schedule No. 001, or, together, the MLSA, with People’s.  The MLSA is dated and became effective as of March 31, 2016.  Loan proceeds were disbursed to Ranor on April 26, 2016.  Pursuant to the MLSA, People’s loaned $3,011,648 to Ranor, or the People’s Loan. The People’s Loan was secured by a first lien on certain machinery and equipment of Ranor, or the Equipment Collateral.  Payments on the People’s Loan were to be made in 60 monthly installments of $60,921 each, inclusive of interest at a fixed rate of 7.90% per annum.  The first monthly installment payment was paid on May 26, 2016.  A prepayment penalty applied during the first four years of the loan term.  Ranor’s obligations under the MLSA were guaranteed by TechPrecision.  The Company covenanted to maintain a DSCR of at least 1.5 to 1.0 during the term of the People’s Loan.  The DSCR was measured at the end of each fiscal year of the Company. The Company was in compliance with the DSCR at March 31, 2019. The People’s Loan was subjected to acceleration upon the occurrence of an “Event of Default” (as defined in the MLSA). Some of the Events of Default were subject to certain cure periods. The Company was in compliance with all of the financial covenants at March 31, 2019.

 

On October 4, 2016, TechPrecision and Ranor became committed to Schedule No. 002 to the MLSA, or Schedule 002. Pursuant to Schedule 002, People’s made an additional loan in the amount of $365,852, or the Additional People’s Loan, to Ranor upon the terms and conditions set forth in the MLSA and Schedule 002. Ranor was to repay the Additional People’s Loan in monthly installments of principal and interest of $7,399 over 60 months.  The Additional People’s Loan was guaranteed by TechPrecision pursuant to the original Corporate Guaranty from TechPrecision in favor of People’s dated March 31, 2016.  The Additional People’s Loan was secured by a security interest in certain machinery and equipment of Ranor as provided in Schedule 002.

 

On December 21, 2016, TechPrecision and Ranor closed on an Amendment to the MLSA, or the MLSA Amendment, with People’s. The MLSA Amendment, dated as of December 20, 2016, amended the definition of “Permitted Liens” under the MLSA to include the liens held by Berkshire Bank pursuant to the terms of the Berkshire Loan Agreement and to delete the reference to the liens held by a former creditor of the Company.

 

Unamortized debt issue costs at December 31, 2019 and March 31, 2019, were $13,820 and 31,720, respectively.

 

Collateral securing the above obligations comprised all personal and real property of TechPrecision and Ranor, including cash, accounts receivable, inventories, equipment, financial and intangible assets.

 

On January 16 and 17, 2020, the Company paid off its remaining debt obligation related to the People’s Equipment Loan Facility. See Note 14 for information regarding this transaction.

 

Finance Lease

 

See Note 12 for information regarding our obligations under the finance lease.

 

NOTE 12 – LEASES

 

We were a party to an operating lease that expired under the contract terms in October 2019. Leases that are economically similar to the purchase of an asset are classified as finance leases. The leased, or right-of-use assets in finance lease arrangements are reported in net property, plant and equipment on our condensed consolidated balance sheet. The following table lists our right-of-use assets and liabilities on our condensed consolidated balance at:

 

   December 31,
2019
 
Finance lease:     
Property, plant and equipment  $54,376 
Accumulated depreciation   32,626 
Net property, plant and equipment  $21,750 
Current portion of long-term debt  $11,617 
Long-term debt  $13,662 
Total finance lease liabilities  $25,279 

 

13 

 

 

Future payments for our finance lease follows by fiscal year: 2020: $3,300, 2021: $13,200 and 2022: $11,000. The amount representing finance lease interest is $2,221. Other supplemental information regarding our leases are contained in the following tables: 

 

Components of lease expense for the period ended:  December 31,
2019
 
Operating lease amortization  $1,756 
Operating lease interest  $83 
Finance lease amortization  $8,132 
Finance lease interest  $1,768 

 

Weighted average lease term and discount rate at:  December 31,
2019
 
Lease term (years)   2.08 
Lease rate   8%

 

Supplemental cash flow information related to leases for the period ended:  December 31,
2019
 
Cash used in operating activities  $1,768 
Cash used in financing activities  $8,132 

 

NOTE 13 - COMMITMENTS

 

Retirement Benefits

 

Ranor has a defined contribution and savings plan that covers substantially all Ranor employees who have completed 90 days of service. Ranor retains the option to match employee contributions. The Company contributed $60,269 and $61,251 in the nine months ended December 31, 2019 and 2018, respectively.

 

NOTE 14 – SUBSEQUENT EVENTS

 

On January 16, 2020, TechPrecision through Ranor repaid in full Ranor’s indebtedness under Schedule No. 002, to the MLSA. Under Schedule 002 to the MSLA, Ranor had borrowed an initial principal amount of $365,852, secured by certain machinery and equipment. The loan was required to be repaid in monthly installments of principal and interest of $7,399 over 60 months. Upon the payment of approximately $147,000, which amount included a 1% prepayment penalty of approximately $1,400, all commitments under Schedule 002 to the MSLA were terminated, and People’s discharged and released all guarantees and liens existing in connection with such loan, thereby terminating such loan agreement schedule.

 

On January 17, 2020, the Company, through Ranor, repaid in full Ranor’s indebtedness under Schedule 001 to the MSLA. Under Schedule 001 to the MSLA, Ranor had borrowed an initial principal amount of $3,011,648, secured by certain machinery and equipment. The loan was required to be repaid in 60 monthly installments of $60,921 each, inclusive of interest at a fixed rate of 7.90% per annum. Upon the payment of approximately $936,000, which amount included a 1% prepayment penalty of approximately $9,200, all commitments under Schedule 001 to the MSLA were terminated, and People’s discharged and released all guarantees and liens existing in connection with such loan, thereby terminating such loan agreement schedule. As all previously outstanding obligations under the MSLA have been satisfied in full, Ranor is no longer bound by any material terms of the MSLA.

 

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

Statement Regarding Forward Looking Disclosure

 

The following discussion of the results of our operations and financial condition should be read in conjunction with our condensed consolidated financial statements and the related notes, which appear elsewhere in this Quarterly Report on Form 10-Q. This Quarterly Report on Form 10-Q, including this section titled “Management’s Discussion and Analysis of Financial Condition and Results of Operations,” may contain predictive or “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. All statements other than statements of current or historical fact contained in this quarterly report, including statements that express our intentions, plans, objectives, beliefs, expectations, strategies, predictions or any other statements relating to our future activities or other future events or conditions are forward-looking statements. The words “anticipate,” “believe,” “continue,” “could,” “estimate,” “expect,” “intend,” “may,” “plan,” “predict,” “project,” “will,” “should,” “would” and similar expressions, as they relate to us, are intended to identify forward-looking statements.

 

14 

 

 

These statements are based on current expectations, estimates and projections made by management about our business, our industry and other conditions affecting our financial condition, results of operations or business prospects. These statements are not guarantees of future performance and involve risks, uncertainties and assumptions that are difficult to predict. Therefore, actual outcomes and results may differ materially from what is expressed or forecasted in, or implied by, the forward-looking statements due to numerous risks and uncertainties. Factors that could cause such outcomes and results to differ include, but are not limited to, risks and uncertainties arising from:

 

  · our reliance on individual purchase orders, rather than long-term contracts, to generate revenue;
  · our ability to balance the composition of our revenues and effectively control operating expenses;
  · the availability of appropriate financing facilities impacting our operations, financial condition and/or liquidity;
  · our ability to receive contract awards through competitive bidding processes;
  · our ability to maintain standards to enable us to manufacture products to exacting specifications;
  · our ability to enter new markets for our services;
  · our reliance on a small number of customers for a significant percentage of our business;
  · competitive pressures in the markets we serve;
  · changes in the availability or cost of raw materials and energy for our production facilities;
  · operating in a single geographic location;
  · restrictions in our ability to operate our business due to our outstanding indebtedness;
  · government regulations and requirements;
  · pricing and business development difficulties;
  · changes in government spending on national defense;
  · our ability to make acquisitions and successfully integrate those acquisitions with our business;
  · general industry and market conditions and growth rates;
  · general economic conditions; and
  · those risks discussed in “Item 1A. Risk Factors” and elsewhere in our 2019 Annual Report on Form 10-K, as well as those described in any other filings which we make with the SEC.

 

Any forward-looking statements speak only as of the date on which they are made, and we undertake no obligation to publicly update or revise any forward-looking statements to reflect events or circumstances that may arise after the date of this Quarterly Report on Form 10-Q, except as required by applicable law. Investors should evaluate any statements made by us in light of these important factors.

 

Overview

 

We offer a full range of services required to transform raw materials into precision finished products. Our manufacturing capabilities include: fabrication operations (cutting, press and roll forming, assembly, welding, heat treating, blasting and painting) and machining operations including CNC (computer numerical controlled) horizontal and vertical milling centers. We also provide support services to our manufacturing capabilities: manufacturing engineering (planning, fixture and tooling development, manufacturing), quality control (inspection and testing), materials procurement, production control (scheduling, project management and expediting) and final assembly.

 

All manufacturing is done in accordance with our written quality assurance program, which meets specific national and international codes, standards, and specifications. Ranor holds several certificates of authorization issued by the American Society of Mechanical Engineers and the National Board of Boiler and Pressure Vessel Inspectors. The standards used are specific to the customers’ needs, and our manufacturing operations are conducted in accordance with these standards.

 

Because our revenues are derived from the sale of goods manufactured pursuant to a contract, and we do not sell from inventory, it is necessary for us to constantly seek new contracts. There may be a time lag between our completion of one contract and commencement of work on another contract. During such periods, we may continue to incur overhead expense but with lower revenue resulting in lower operating margins. Furthermore, changes in either the scope of an existing contract or related delivery schedules may impact the revenue we receive under the contract and the allocation of manpower. Although we provide manufacturing services for large governmental programs, we usually do not work directly for the government or its agencies. Rather, we perform our services for large governmental contractors. Our business is dependent in part on the continuation of governmental programs which require our services and products.

 

15 

 

 

Our contracts are generated both through negotiation with the customer and from bids made pursuant to a request for proposal. Our ability to receive contract awards is dependent upon the contracting party’s perception of such factors as our ability to perform on time, our history of performance, including quality, our financial condition and our ability to price our services competitively.  Although some of our contracts contemplate the manufacture of one or a limited number of units, we continue to seek more long-term projects with predictable cost structures.

 

All of our sales recorded for the nine months ended December 31, 2019 were generated in the U.S. We have experienced, and continue to experience, customer concentration. For the nine months ended December 31, 2019 and 2018, our largest customer accounted for approximately 21% and 36% of reported net sales, respectively. For the nine months ended December 31, 2019, we had five customers which accounted for approximately 74% of our revenue, in the aggregate. Our sales order backlog at December 31, 2019 and March 31, 2019 was approximately $17.0 million and $12.6 million, respectively.

 

For the nine months ended December 31, 2019, our net sales were $11.1 million compared with net sales of $12.0 million for the nine months ended December 31, 2018.  Our gross margin for the nine months ended December 31, 2019 and 2018 was 16.6% and 26.0%, respectively. Our gross margin for the nine months ended December 31, 2019 was impacted by higher cost of sales primarily due to cost overruns on certain customer projects. We generated $0.6 million of cash from operating activities in the nine months ended December 31, 2019 and had a cash balance of $2.0 million at December 31, 2019.

 

Critical Accounting Policies

 

The preparation of the condensed consolidated financial statements requires that we make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. We base our estimates on historical experience and various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. We continually evaluate our estimates, including those related to revenue recognition, inventories, recovery of long-lived assets, income taxes and the valuation of equity transactions. These estimates and assumptions require management's most difficult, subjective or complex judgments. Actual results may differ under different assumptions or conditions.

 

Our significant accounting policies are set forth in detail in Note 2 to the consolidated financial statements included in the 2019 Annual Report on Form 10-K. We consider the policies relating to revenue recognition to be a critical accounting policy. There have been no significant changes to our critical accounting policies during the nine months ended December 31, 2019.

 

Accounting Pronouncements

 

New Accounting Standards

 

See Note 3, Accounting Standards Update, in the Notes to the condensed consolidated financial statements in “Item 1. Financial Statements” for a discussion of recently adopted new accounting guidance and new accounting guidance not yet adopted.

 

Results of Operations

 

Our results of operations are affected by a number of external factors including the availability of raw materials, commodity prices (particularly steel), macroeconomic factors, including the availability of capital that may be needed by our customers, and political, regulatory and legal conditions in the United States. Generally, our product mix is made up of short-term contracts with a production timeline of less than twelve months. Units manufactured under the majority of our customer contracts are delivered on time and with a positive gross margin.  Our results of operations are also affected by our success in booking new contracts, the timing of revenue recognition, delays in customer acceptances of our products, delays in deliveries of ordered products and our rate of progress fulfilling obligations under our contracts. A delay in deliveries or cancellations of orders could have an unfavorable impact on liquidity, cause us to have inventories in excess of our short-term needs, and delay our ability to recognize, or prevent us from recognizing, revenue on contracts in our order backlog.

 

Key Performance Indicators

 

While we prepare our financial statements in accordance with U.S. generally accepted accounting principles, or U.S. GAAP, we also utilize and present certain financial measures that are not based on or included in U.S. GAAP. We refer to these as Non-GAAP financial measures.  Please see the section “EBITDA Non-GAAP financial measure” below for further discussion of these financial measures, including the reasons why we use such financial measures and reconciliations of such financial measures to the nearest U.S. GAAP financial measures.

 

16

 

 

Three Months Ended December 31, 2019 and 2018

 

The following table sets forth information from our condensed consolidated statements of operations and comprehensive (loss) income, in dollars and as a percentage of revenue:

   2019   2018   Changes 
(dollars in thousands)  Amount   Percent   Amount   Percent   Amount   Percent 
Net sales  $3,667    100%  $4,270    100%  $(603)   (14)%
Cost of sales   3,353    91%   3,299    77%   54    2%
Gross profit   314    9%   971    23%   (657)   (68)%
Selling, general and administrative   663    18%   632    15%   31    5%
(Loss) income from operations   (349)   (9)%   339    8%   (688)   (203)%
Other expense, net   (69)   (2)%   (86)   (2)%   17    20%
(Loss) income before taxes   (418)   (11)%   253    6%   (671)   (265)%
Income tax (benefit) expense   (98)   (3)%   35    1%   (133)   (382)%
Net (loss) income  $(320)   (8)%  $218    5%  $(538)   (247)%

  

Net Sales

 

Net sales were $3.7 million for the three months ended December 31, 2019, or 14% lower when compared to net sales for the three months ended December 31, 2018 of $4.3 million. Changes in net sales generally reflect a different product mix and project volume when comparing the current and prior periods. 

 

Net sales to defense customers decreased by $1.0 million when compared to the three months ended December 31, 2018. Defense market revenue was lower due to a product mix that includes certain low margin customer projects when compared with a higher margin product mix in the same quarter a year ago. Increases in estimated hours to complete these certain low margin projects continued to dampen revenue recognition. Net sales in energy and industrial markets increased by $0.3 million and $0.1 million, respectively.

 

Cost of Sales and Gross Margin

 

Cost of sales consists primarily of raw materials, parts, labor, overhead and subcontracting costs. Our cost of sales were $3.4 million for the three months ended December 31, 2019, compared to $3.3 million for the three months ended December 31, 2018. Gross profit was $0.3 million or a $0.7 million decrease when compared to the three months ended December 31, 2018. As a result, gross margin was 8.6% for the three months ended December 31, 2019, compared to 22.7% for the three months ended December 31, 2018.

 

An increase in the loss provision for certain customer projects had a negative impact on gross profit and gross margin as more labor hours were used on less profitable projects. We incurred an additional $0.3 million in cost overruns in the third quarter of fiscal 2020.

 

Selling, General and Administrative Expenses

 

Total selling, general and administrative expenses for the three months ended December 31, 2019 increased by $30,892 when compared to the three months ended December 31, 2018, due primarily to an increase in professional fees for accounting and legal services.

 

Other Expense, net

 

Interest expense and debt cost amortization was lower for the three months ended December 31, 2019 when compared to the three months ended December 31, 2018, and, absent any changes to outstanding indebtedness, will continue to decrease as we amortize debt principal to maturity. The following table reflects other income, interest expense and amortization of debt issue costs for the three months ended:

 

   December 31,
2019
   December 31,
2018
   $ Change   % Change 
Other income, net  $185   $1,590   $(1,405)   (88)%
Interest expense  $(58,817)  $(74,523)  $15,706    21%
Amortization of debt issue costs  $(10,511)  $(13,791)  $3,280    24%

 

17

 

 

Income Taxes

 

As a result of the foregoing, principally our lower net sales and cost of sales, the Company reported a pretax loss and recorded a tax benefit of $97,734 for the three months ended December 31, 2019. For the three months ended December 31, 2018 we recorded tax expense of $34,701.

 

Net (Loss) Income

 

As a result of the foregoing, for the three months ended December 31, 2019, we recorded net loss of $0.3 million compared with net income of $0.2 million for the three months ended December 31, 2018.

 

Nine Months Ended December 31, 2019 and 2018

 

The following table sets forth information from our condensed consolidated statements of operations and comprehensive (loss) income, in dollars and as a percentage of revenue:

   2019   2018   Changes 
(dollars in thousands)  Amount   Percent   Amount   Percent   Amount   Percent 
Net sales  $11,075    100%  $11,990    100%  $(915)   (8)%
Cost of sales   9,238    83%   8,872    74%   366    4%
Gross profit   1,837    17%   3,118    26%   (1,281)   (41)%
Selling, general and administrative   2,145    19%   2,113    18%   32    2%
(Loss) income from operations   (308)   (3)%   1,005    8%   (1,313)   (131)%
Other expense, net   (197)   (2)%   (265)   (2)%   68    26%
(Loss) income before taxes   (505)   (5)%   740    6%   (1,245)   (168)%
Income tax (benefit) expense   (115)   (1)%   177    1%   (292)   (165)%
Net (loss) income  $(390)   (4)%  $563    5%  $(953)   (169)%
                               

  

Net Sales

 

Changes in net sales generally reflect a different product mix and project volume when comparing the current and prior periods. Net sales were $11.1 million for the nine months ended December 31, 2019, or 8% lower when compared to net sales for the nine months ended December 31, 2018 of $12.0 million. Net sales in defense markets decreased by $1.8 million when compared to the nine months ended December 31, 2018.

 

The Company records most of its revenue over time as it completes performance obligations. We measure progress for performance obligations satisfied over time using input methods (e.g., labor hours expended and time elapsed). Our current product mix includes certain customer projects with little or no margin which has consumed a higher number of actual labor hours than originally estimated to complete. The higher actual labor hours had the effect of consuming hours that could have been allocated to higher margin projects. This set of conditions has had a negative impact on revenue recognition and cost of sales primarily in our defense markets during the nine months ended December 31, 2019. Our defense backlog, however, remains strong as new orders for components continue to flow from prime defense contractors.

 

For the nine months ended December 31, 2019, revenue in energy and precision industrial markets increased by $0.2 million and $0.7 million, respectively.

 

Remaining performance obligations reflect future revenue that will be recorded in subsequent periods as projects in progress are completed. At December 31, 2019, the Company had $17.0 million of remaining performance obligations, an increase of $2.9 million when compared with December 31, 2018.  

 

Cost of Sales and Gross Margin

 

Cost of sales consists primarily of raw materials, parts, labor, overhead and subcontracting costs. Our cost of sales for the nine months ended December 31, 2019 were $9.2 million compared to $8.9 million for the nine months ended December 31, 2018. Gross profit decreased by $1.3 million to $1.8 million. Gross margin was lower at 16.6% for the nine months ended December 31, 2019 compared to 26.0% for the nine months ended December 31, 2018.

 

18

 

 

In the nine months ended December 31, 2019, gross profit and gross margin were impacted by an increase of $0.7 million in cost of sales for potential losses on certain customer projects. The fiscal 2020 nine month period was also marked by a higher number of new project startup activities, and a higher number of labor allocated to less profitable projects.

 

Selling, General and Administrative Expenses

 

Total selling, general and administrative expenses for the nine months ended December 31, 2019 were up slightly due primarily to an increase in professional fees, almost entirely offset by a decrease in salary expense when compared to the nine months ended December 31, 2018.

 

Other Expense, net

 

Interest expense and debt cost amortization was lower for the nine months ended December 31, 2019 when compared to the nine months ended December 31, 2018, and, absent any changes to our outstanding indebtedness, will continue to decrease as we amortize debt principal to maturity. Other income, net for the nine months ended December 31, 2019 includes proceeds from the sale of machinery and equipment for $16,000. The following table reflects other income, interest expense and amortization of debt issue costs for the nine months ended:

 

   December 31,
2019
   December 31,
2018
   $ Change   % Change 
Other income, net  $21,063   $8,605   $12,458    145%
Interest expense  $(187,167)  $(230,310)  $43,143    19%
Amortization of debt issue costs  $(31,280)  $(43,638)  $12,358    28%

 

Income Taxes

 

For the nine months ended December 31, 2019 we recorded a tax benefit of $0.1 million compared to tax expense of $0.2 million for the nine months ended December 31, 2018. The tax benefit for the nine months ended December 31, 2019 was primarily the result of a pretax loss recorded for the period in all tax jurisdictions. Our effective tax rate for the first nine months of fiscal 2020 was 22.8%.

 

Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences and carryforwards are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date. 

 

The valuation allowance on deferred tax assets at December 31, 2019 was approximately $1.7 million. We believe that it is more likely than not that the benefit from certain state and foreign NOL carryforwards and other deferred tax assets will not be realized. In recognition of this risk, we continue to provide a valuation allowance on these items. In the event future taxable income is below management’s estimates or is generated in tax jurisdictions different than projected, the Company could be required to increase the valuation allowance for deferred tax assets. This would result in an increase in the Company’s effective tax rate.

  

Net (Loss) Income

 

As a result of the foregoing, for the nine months ended December 31, 2019, we recorded net loss of $0.4 million compared with net income of $0.6 million for the nine months ended December 31, 2018.

 

Liquidity and Capital Resources

 

On December 23, 2019 we entered into a Third Modification to Loan Agreement, or the Third Modification, and an Amended and Restated Promissory Note with Berkshire Bank. The Third Modification amends and modifies the Loan Agreement between Ranor and Berkshire Bank dated December 20, 2016, as amended by the First Modification to Loan Agreement dated June 6, 2018 and the Second Modification to Loan Agreement and First Modification and Allonge to Promissory Note dated December 19, 2018.

 

Under the Third Modification, Ranor and Berkshire Bank agreed to increase the maximum principal amount available under the Revolver Loan from $1,000,000 to $3,000,000, which is available for refinancing existing indebtedness and for working capital and general corporate purposes. Additionally, the parties agreed to lower the interest rate on advances made under the Revolver Loan based on LIBOR. Prior to the Third Modification, interest accrued on advances made under the Revolver Loan at a variable rate equal to the one-month LIBOR plus 275 basis points.  Under the Third Modification, interest accrues on such advances at a variable rate equal to the one-month LIBOR plus 225 basis points.  The Third Modification contains customary LIBOR replacement provisions.

 

19

 

 

The maturity date of the Revolver Loan remains December 20, 2020, and all other material terms of the Loan Agreement and Line of Credit Note were unchanged.

 

At December 31, 2019, we had cash and cash equivalents of $2.0 million and working capital of $5.4 million. In January 2020, the Company used $1.1 million from available cash and repaid in full its capital equipment obligation with Peoples Capital. This payment reduced our total debt obligations to $2.6 million at January 17, 2020 from $3.7 million at December 31, 2019.

 

We believe our available cash plus cash provided from operations will be sufficient to fund our operations, capital expenditures and principal and interest payments under our debt obligations through the 12 months from the issuance date of our financial statements. We also have a Revolver Loan with Berkshire Bank available as a resource, if necessary. The table below presents selected liquidity and capital measures for the periods ended:

 

(dollars in thousands) 

December 31,

2019

  

March 31,

2019

  

Change

Amount

 
Cash and cash equivalents  $1,968   $2,037   $(69)
Working capital  $5,381   $6,250   $(869)
Total debt  $3,687   $4,297   $(610)
Total stockholders’ equity  $9,410   $9,711   $(301)

 

The following table summarizes the primary components of cash flows for the nine months ended:

 

(dollars in thousands) 

December 31,

2019

  

December 31,

2018

  

Change

Amount

 
Cash flows provided by (used in):               
Operating activities  $609   $121   $488 
Investing activities   (35)   (403)   368 
Financing activities   (642)   (570)   (72)
Net decrease in cash  $(68)  $(852)  $784 

 

Operating activities

 

Our primary sources of cash are from accounts receivable collections, customer advance payments and project progress payments. Our customers make advance payments and progress payments under the terms of each manufacturing contract. Our cash flows can fluctuate significantly from period to period as the composition of our receivables collections mix changes between advance payments and customer payments made after shipment of finished goods. We use cash to pay suppliers, employee wages and benefits, and interest and taxes.

 

Cash provided by operations for the nine months ended December 31, 2019 and 2018 was $0.6 million and $0.1 million, reflecting a change of $0.5 million. Favorable timing with customer advance payments and progress payments resulted in higher amounts of cash generated for the nine months ended December 31, 2019. The nine months ended December 31, 2019 was marked by an increase in project startup activity which resulted in more cash collected from customer advances and progress payments. At December 31, 2018, the Company had fewer sales orders in production, which led to a slower cash build at the end of the first nine months of fiscal 2019.

 

Investing activities

 

We anticipate that we will continue to make small investments in new factory machinery and equipment over the next calendar year. Net cash used in investing activities totaled $35,225 for the nine months ended December 31, 2019. We expended $0.4 million for new factory machinery and equipment for the nine months ended December 31, 2018.

 

Financing activities

 

We used $0.6 million of cash in financing activities for the nine months ended December 31, 2019 and 2018 for monthly principal payments in connection with our debt obligations.

 

All of the above activity resulted in a net decrease in cash of $0.1 million for the nine months ended December 31, 2019 compared with a decrease in cash of $0.9 million for the nine months ended December 31, 2018.

 

20

 

 

Off-Balance Sheet Arrangements

 

We do not currently have, and have not had any off-balance sheet assets, liabilities or arrangements at December 31, 2019.

  

EBITDA Non-GAAP Financial Measure

 

To complement our condensed consolidated statements of operations and comprehensive (loss) income and condensed consolidated statements of cash flows, we use EBITDA, a non-GAAP financial measure. Net income is the financial measure calculated and presented in accordance with U.S. GAAP that is most directly comparable to EBITDA. We believe EBITDA provides our board of directors, management and investors with a helpful measure for comparing our operating performance with the performance of other companies that have different financing and capital structures or tax rates. We also believe that EBITDA is a measure frequently used by securities analysts, investors and other interested parties in the evaluation of companies in our industry, and is a measure contained in our debt covenants. However, while we consider EBITDA to be an important measure of operating performance, EBITDA and other non-GAAP financial measures have limitations, and investors should not consider them in isolation or as a substitute for analysis of our results as reported under GAAP.

  

We define EBITDA as net (loss) income plus interest, income taxes, depreciation and amortization. The following table provides a reconciliation of EBITDA to net income, the most directly comparable GAAP measure reported in our condensed consolidated financial statements for the three and nine months ended: 

 

   Three Months ended December 31,   Nine Months ended December 31, 
(dollars in thousands)  2019   2018   change   2019   2018   Change 
Net (loss) income  $(320)  $218   $(538)  $(390)  $563   $(953)
Income tax (benefit) expense   (98)   35    (133)   (115)   177    (292)
Interest expense (1)   69    88    (19)   218    274    (56)
Depreciation   168    187    (19)   548    559    (11)
EBITDA  $(181)  $528   $(709)  $261   $1,573   $(1,312)

 

(1) Includes amortization of debt issue costs.

 

Item 3. Quantitative and Qualitative Disclosure About Market Risk.

 

As a smaller reporting company, we have elected not to provide the information required by this Item.

 

Item 4. Controls and Procedures.

 

Evaluation of Disclosure Controls and Procedures.

 

Disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act) are controls and procedures that are designed to ensure that the information required to be disclosed in our reports filed or submitted under the Exchange Act is recorded, processed, summarized, and reported within the time periods specified in the SEC’s rules and forms and includes controls and procedures designed to ensure that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

As of the end of the period covered by this report, an evaluation was carried out, under the supervision and with the participation of management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures. Based on that evaluation, our Chief Executive Officer and Chief Financial Officer concluded that, as of December 31, 2019, our disclosure controls and procedures were effective at a reasonable assurance level.

 

Inherent Limitations Over Internal Controls

 

The Company’s internal control over financial reporting is designed under the supervision of our Chief Executive Officer and Chief Financial Officer, and effected by our board of directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. GAAP. The Company’s internal control over financial reporting includes those policies and procedures that: (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the Company’s assets; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that the Company’s receipts and expenditures are being made only in accordance with authorizations of the Company’s management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the Company’s assets that could have a material effect on the financial statements.

 

21

 

 

Management, including the Chief Executive Officer and Chief Financial Officer, does not expect that the Company’s internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods is subject to the risk that those internal controls may become inadequate because of changes in business conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Changes in Internal Control over Financial Reporting

 

For the quarter ended December 31, 2019, there have been no changes in our internal control over financial reporting that have materially affected or are reasonably likely to materially affect, our internal control over financial reporting.

 

PART II. Other Information.

 

Item 1. Legal Proceedings.

 

Class Action Lawsuit

 

On or about February 26, 2016, nine former employees, or plaintiffs, of Ranor filed a complaint in the Massachusetts Superior Court, Worcester County, against Ranor and certain former and current executive officers of Ranor, alleging violations of the Massachusetts Wage Act, breach of contract and conversion based on a modification made to Ranor’s personal time off policy. Plaintiffs claim that Ranor’s modification to its personal time off, or PTO, policy in April 2014 caused these employees to forfeit earned PTO. Plaintiffs purport to assert their claims on behalf of a class of all current and former employees of Ranor who were affected by the modification to Ranor’s PTO policy. In 2018, plaintiffs’ motion for class certification was granted. In September 2019, cross-motions for summary judgment were made by Ranor and the plaintiffs, and oral arguments were heard by the court on such motions in December 2019. On February 12, 2020, the court denied both parties’ motions for summary judgement.

 

Item 6. Exhibits

 

Exhibit Index

 

Exhibit No.   Description  
3.1   Certificate of Incorporation of the Registrant (incorporated herein by reference to Exhibit 3.1 to our registration statement on Form SB-2, filed with the Commission on August 28, 2006).
3.2   Amended and Restated By-laws of the Registrant (incorporated herein by reference to Exhibit 3.1 to our Current Report on Form 8-K, filed with the Commission on February 3, 2014).
3.3   Certificate of Designation for Series A Convertible Preferred Stock of the Registrant (incorporated herein by reference to Exhibit 3.1 to our Current Report on Form 8-K, filed with the Commission on March 3, 2006).
3.4   Certificate of Amendment to Certificate of Designation for Series A Convertible Preferred Stock of the Registrant (incorporated herein by reference to Exhibit 3.5 to our Quarterly Report on Form 10-Q, filed with the Commission on November 12, 2009).
10.1   Third Modification to Loan Agreement, dated December 23, 2019, between Ranor, Inc. and Berkshire Bank (incorporated by reference to our Current Report on Form 8-K filed with the Commission on December 30, 2019).
31.1   Certification of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
31.2   Certification of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
32.1   Certification of Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
101   The following financial information from this Quarterly Report on Form 10-Q for the quarter ended December 31, 2019, formatted in XBRL (Extensible Business Reporting Language): (i) the Condensed Consolidated Balance Sheets at December 31, 2019 and March 31, 2019; (ii) the Condensed Consolidated Statements of Operations and Comprehensive Income (Loss) for the three and nine months ended December 31, 2019 and 2018; (iii) the Condensed Consolidated Statements of Stockholders’ Equity for the three and nine months ended December 31, 2019 and 2018; (iv) the Condensed Consolidated Statements of Cash Flows for the nine months  ended December 31, 2019 and 2018; and (v) the Notes to the Condensed Consolidated Financial Statements.

 

22

 

 

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

    TechPrecision Corporation
February 13, 2020 By:  /s/ Thomas Sammons
    Thomas Sammons
    Chief Financial Officer
    (duly authority signatory and principal financial officer)

 

23