Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - PARK AEROSPACE CORPex32-2.htm
EX-32.1 - EXHIBIT 32.1 - PARK AEROSPACE CORPex32-1.htm
EX-31.2 - EXHIBIT 31.2 - PARK AEROSPACE CORPex31-2.htm
EX-31.1 - EXHIBIT 31.1 - PARK AEROSPACE CORPex31-1.htm
EX-23.1 - EXHIBIT 23.1 - PARK AEROSPACE CORPex23-1.htm
EX-21.1 - EXHIBIT 21.1 - PARK AEROSPACE CORPex21-1.htm
EX-10.9(A) - EXHIBIT 10.9(A) - PARK AEROSPACE CORPex10-9a.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

FORM 10-K

 

(Mark One)

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

  For the fiscal year ended February 26, 2017

 

OR

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

  For the transition period from ________ to _______

 

Commission file number 1-4415

 

PARK ELECTROCHEMICAL CORP.

(Exact Name of Registrant as Specified in Its Charter)

 

New York

11-1734643

(State or Other Jurisdiction of

Incorporation of Organization)

(I.R.S. Employer

Identification No.)

         48 South Service Road, Melville, New York

(Address of Principal Executive Offices)

11747

(Zip Code)

 

Registrant’s telephone number, including area code (631) 465-3600

 

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Each Class

Name of Each Exchange on Which Registered

Common Stock, par value $.10 per share

New York Stock Exchange

   

 

Securities registered pursuant to Section 12(g) of the Act:   None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ☐     No ☒

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes ☐    No ☒

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ☒  No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ☒    No ☐

 

 
 

 

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  ☒

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, a smaller reporting company or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer ☐

Accelerated filer ☒

Non-accelerated filer (Do not check if a smaller reporting company) ☐

Smaller reporting company ☐

Emerging growth company ☐

 

If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ☐     No ☒

 

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was sold, or the average bid and asked prices of such common equity, as of the last business day of the registrant's most recently completed second fiscal quarter.

 

Title of Class

 

Aggregate Market Value

 

As of Close of Business On

Common Stock, par value $.10 per share

  $ 326,334,973  

August 26, 2016

 

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date.

 

Title of Class

 

Shares Outstanding

 

As of Close of Business On

Common Stock, par value $.10 per share

    20,234,671  

May 5, 2017

 

DOCUMENTS INCORPORATED BY REFERENCE

Proxy Statement for Annual Meeting of Shareholders to be held July 18, 2017 incorporated by reference into Part III of this Report.

 



 

 
2

 

 

 

TABLE OF CONTENTS

 
   

Page

PART I

   
     

Item 1.

Business

4

Item 1A. Risk Factors 15
Item 1B. Unresolved Staff Comments 19

Item 2.

Properties

19

Item 3.

Legal Proceedings

19

Item 4.

Mine Safety Disclosures

19

 

Executive Officers of the Registrant

20

     

PART II

   
     

Item 5.

Market for the Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

22

Item 6.

Selected Financial Data

24

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations

25

 

Factors That May Affect Future Results

37

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk

39

Item 8.

Financial Statements and Supplementary Data

40

Item 9.

Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

68

Item 9A.

Controls and Procedures

68

Item 9B.

Other Information

71

     

PART III

   
     

Item 10.

Directors, Executive Officers and Corporate Governance

71

Item 11.

Executive Compensation

71

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

71

Item 13.

Certain Relationships and Related Transactions, and Director Independence

71

Item 14.

Principal Accountant Fees and Services

71

     

PART IV

   
     

Item 15.

Exhibits and Financial Statement Schedule

72

   

SIGNATURES

73

   

FINANCIAL STATEMENT SCHEDULE

 
   

Schedule II – Valuation and Qualifying Accounts

74

   

EXHIBIT INDEX

75

 

 
3

 

 

PART I

 

ITEM 1.     BUSINESS.

 

General

 

Park Electrochemical Corp. (“Park”), through its subsidiaries (unless the context otherwise requires, Park and its subsidiaries are hereinafter called the “Company”), is a global advanced materials company which develops and manufactures advanced composite materials, primary and secondary structures and assemblies and low-volume tooling for the aerospace markets and high-technology digital and radio frequency (“RF”)/microwave printed circuit materials principally for the telecommunications and internet infrastructure, enterprise and military markets. Park’s core capabilities are in the areas of polymer chemistry formulation and coating technology.

 

Park operates through fully integrated business units in Asia, Europe and North America. The Company's manufacturing facilities are located in Kansas, Singapore, France, Arizona and California. The Company also maintains research and development facilities in Arizona, Kansas and Singapore.

 

Sales of Park’s advanced composite materials, parts and assemblies products were 28%, 27% and 22% of the Company’s total net sales worldwide in the 2017, 2016 and 2015 fiscal years, respectively, and sales of Park’s printed circuit materials products were 72%, 73% and 78% of the Company’s total net sales worldwide in the 2017, 2016 and 2015 fiscal years, respectively.

 

Park was founded in 1954 by Jerry Shore, who was the Company’s Chairman of the Board until July 14, 2004.

 

The sales and long-lived assets of the Company’s operations by geographic area for the last three fiscal years are set forth in Note 13 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report. The Company’s foreign operations are conducted principally by the Company’s subsidiaries in Singapore and France. The Company’s foreign operations are subject to the impact of foreign currency fluctuations. See Note 1 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report.

 

The Company makes available free of charge on its Internet website, www.parkelectro.com, its annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and all amendments to those reports as soon as reasonably practicable after such material is electronically filed with or furnished to the Securities and Exchange Commission. None of the information on the Company's website shall be deemed to be a part of this Report.

 

AEROGLIDE®, COREFIX®, EASYCURE E-710®, LD®, MERCURYWAVE®, METEORWAVE®, NELCO®, RTFOIL®, SI® and TIN CITY AIRCRAFT WORKS® are registered trademarks of Park Electrochemical Corp., and ALPHASTRUT™, ELECTROGLIDE™, ELECTROVUE™, EF™, EP™, NELTEC™, PEELCOTE™, POWERBOND™ and SIGMASTRUT™ are common law trademarks of Park Electrochemical Corp.

 

 
4

 

 

Advanced Composite Materials, Parts and Assemblies

 

Advanced Composite Materials, Parts and Assemblies - Operations

 

The Company develops and manufactures engineered, advanced composite materials and advanced composite parts and assemblies and low-volume tooling for the aerospace markets and prototype tooling for such parts and assemblies.

 

The Company’s advanced composite materials are developed and manufactured by the Company’s Park Aerospace Technologies Corp. (“PATC”) business unit located at the Newton, Kansas Airport and by the Company’s Nelco Products Pte. Ltd. business unit in Singapore. The Company’s advanced composite parts and assemblies and low-volume tooling are also developed and manufactured by the Company’s PATC business unit.

 

PATC offers a full range of advanced composite materials manufacturing capability, as well as composite parts design, assembly and production capability, all in its Newton facility. PATC offers composite aircraft and space vehicle parts design and assembly services, in addition to “build-to-print” services. The Company believes that the ability of its PATC facility to offer such a wide and comprehensive array of composite materials and parts manufacturing and development technology and capability to the aircraft and space vehicle industries provides attractive benefits and advantages to those industries.

 

Advanced Composite Materials, Parts and Assemblies – Industry Background

 

The advanced composite materials manufactured by the Company and its competitors are used primarily to fabricate light-weight, high-strength structures with specifically designed performance characteristics. Composite materials are typically highly specified combinations of resin formulations and reinforcements. Reinforcements can be unidirectional fibers, woven fabrics, or non-woven goods such as mats or felts. Resin formulations are typically highly proprietary, and include various chemical and physical mixtures. The Company produces resin formulations using various epoxies, polyesters, phenolics, cyanate esters, polyimides and other complex matrices. The reinforcement combined with the resin is referred to as a “prepreg”. Advanced composite materials can be broadly categorized as either thermosets or thermoplastics. While both material types require the addition of heat to form a consolidated laminate, thermoplastics can be reformed using additional heat. Once fully cured, thermoset materials cannot be further reshaped. The Company believes that the demand for thermoset advanced materials is greater than that for thermoplastics due to the fact that fabrication processes for thermoplastics require much higher temperatures and pressures and are, therefore, typically more capital intensive than the fabrication processes for thermoset materials.

 

The Company works with aerospace original equipment manufacturers (“OEMs”), such as general aviation aircraft manufacturers and commercial aircraft manufacturers, and certain tier 1 suppliers to qualify its advanced composite materials or parts and assemblies for use on current and upcoming programs. The Company’s customers typically design and specify a material specifically to meet the needs of the part’s end use and the customers’ processing methods. Such customers sometimes work with a supplier to develop the specific resin system and reinforcement combination to match the application. The Company’s customers’ processing, or the Company’s processing, may include hand lay-up, resin infusion or more advanced automated lay-up processes. Automated lay-up processes include automated tape lay-up, automated fiber placement and filament winding. These fabrication processes significantly alter the material form purchased. After the lay-up process is completed, the material is cured by the addition of heat and pressure. Cure processes typically include vacuum bag oven curing, high pressure autoclave, press forming and before-press curing. After the part has been cured, final finishing and trimming, and assembly of the structure, is performed by the fabricator or the Company.

 

 
5

 

 

Advanced Composite Materials, Parts and Assemblies – Products

 

The advanced composite materials products manufactured by the Company are primarily thermoset curing prepregs. The Company has developed proprietary resin formulations to suit the needs of the markets in which it participates by analyzing the needs of the markets and working with its customers. The complex process of developing resin formulations and selecting the proper reinforcement is accomplished through a collaborative effort of the Company’s research and development and technical sales and marketing resources working with the customers’ technical staff. The Company focuses on developing a thorough understanding of its customers’ businesses, product lines, processes and technical challenges. The Company develops innovative solutions which utilize technologically advanced materials and concepts for its customers.

 

The Company’s advanced composite materials products include prepregs manufactured from proprietary formulations using modified epoxies, phenolics, polyesters, cyanate esters and polyimides combined with woven, non-woven and unidirectional reinforcements. Reinforcement materials used to produce the Company’s products include polyacrylonitrile (“PAN”) based carbon fiber, E-glass (fiberglass), S2 glass, quartz, carbonized rayon, aramids, such as Kevlar® (“Kevlar” is a registered trademark of E.I. du Pont de Nemours & Co.), Twaron® (“Twaron” is a registered trademark of Teijin Twaron B.V. LLC), polyester and other synthetic materials. The Company also sells certain specialty prepregs, such as Raycarb C2, a carbonized rayon fabric produced by Airbus Safran Launchers SAS (formerly Herakles, formerly Snecma Propulsion Solide) and used mainly in the rocket motor industry, and Enka AS, a proprietary commercial rayon fabric produced by Highland Industries, Inc. and used in the aerospace industry as the base white material for carbon phenolic applications.

 

The Company’s composite parts and assemblies are manufactured with carbon, fiberglass and other reinforcements impregnated with formulated resins. Certain of these impregnated reinforcements, or prepregs, are also manufactured by PATC. The Company also provides low-volume tooling in connection with its manufacture and sale of composite parts and assemblies.

 

Advanced Composite Materials, Parts and Assemblies – Customers and End Markets

 

The Company’s advanced composite materials, parts and assemblies customers include manufacturers of turbofan engines, aircraft primary and secondary structures and radomes, including military aircraft, unmanned aerial vehicles (“UAVs”), business jets and turboprops, large and regional transport aircraft and helicopters, space vehicles, rocket motors and specialty industrial products. The Company’s advanced composite materials are marketed primarily by sales personnel and, to a lesser extent, by independent distributors and independent sales representatives, and the Company’s advanced composite parts and assemblies are marketed primarily by sales personnel.

 

While no single advanced composite materials, parts and assemblies customer accounted for 10% or more of the Company’s total sales during any of the last three fiscal years, the loss of a major customer or of a group of customers could have a material adverse effect on the Company’s business or its consolidated results of operations or financial position.

 

 
6

 

 

The Company’s aerospace customers include fabricators of aircraft composite parts and assemblies. The Company’s advanced composite materials are used by such fabricators and by the Company to produce primary and secondary structures, aircraft interiors and various other aircraft components. The Company’s customers for aerospace materials, and the Company itself, produce parts and assemblies for commercial aircraft and for the general aviation and business aviation, kit aircraft, special mission, UAVs and military markets. Many of the Company’s composite materials are used in the manufacture of aircraft certified by the Federal Aviation Administration (the “FAA”).

 

Customers for the Company’s rocket motor materials include United States defense prime contractors and subcontractors. These customers fabricate rocket motors for heavy lift space launchers, strategic defense weapons, tactical motors and various other applications. The Company’s materials are used to produce heat shields, exhaust gas management devices and insulative and ablative nozzle components. Rocket motors are primarily used for commercial and military space launch, and for tactical and strategic weapons. The Company also has customers for these materials outside of the United States.

 

The Company also sells composite materials for use in RF electrical applications. Customers buying these materials typically fabricate antennas and radomes engineered to preserve electrical signal integrity. A radome is a protective cover over an electrical antenna or signal generator. The radome is designed to minimize signal loss and distortion.

 

Advanced Composite Materials, Parts and Assemblies – Manufacturing

 

The Company’s manufacturing facilities for advanced composite materials are currently located in Newton, Kansas and in Singapore, and its manufacturing facility for composite parts and assemblies is also located in Newton, Kansas. See “Advanced Composite Materials, Parts and Assemblies – Operations” elsewhere in this Report.

 

The process for manufacturing composite materials, parts and assemblies is capital intensive and requires sophisticated equipment, significant technical know-how and very tight process controls. The key steps used in the manufacturing process include resin mixing, resin film casting and reinforcement impregnation via hot-melt process or a solution process.

 

Prepreg is manufactured by the Company using either solvent (solution) coating methods on a treater or by hot melt impregnation. A solution treater is a roll-to-roll continuous process machine which sequences reinforcement through tension controllers and combines solvated resin with the reinforcement. The reinforcement is dipped in resin, passed through a drying oven which removes the solvent and advances (or partially cures) the resin. The prepreg material is interleafed with a carrier and cut to the roll lengths desired by the customer. The Company also manufactures prepreg using hot melt impregnation methods which use no solvent. Hot melt prepreg manufacturing is achieved by mixing a resin formulation in a heated resin vessel, casting a thin film on a carrier paper, and laminating the reinforcement with the resin film.

 

The Company also completes additional processing services, such as slitting, sheeting, biasing, sewing and cutting, if needed by the customer. Many of the products manufactured by the Company also undergo extensive testing of the chemical, physical and mechanical properties of the product. These testing requirements are completed in the laboratories and facilities located at the Company’s manufacturing facilities.

 

 
7

 

 

The Company’s laboratories have been approved by several aerospace OEMs, and the Company has achieved certification pursuant to the National Aerospace and Defense Contractors Accreditation Program (“NADCAP”) for both non-metallic materials manufacturing and testing and composites fabrication. After all the processing has been completed, the product is tested and packaged for shipment to the customer. The Company typically supplies final product to the customer in roll or sheet form. The Company’s PATC facility has received accreditation by NADCAP for composite parts manufacturing and for composite materials manufacturing, and the Company believes that the PATC facility is one of the few facilities in the world with NADCAP accreditation for manufacturing both composite materials and composite parts. The Company has also received AS9100C certification for its quality management system for the manufacture of advanced composite materials and design and manufacturing of parts for aircraft and aerospace industries.

 

Advanced Composite Materials, Parts and Assemblies – Materials and Sources of Supply

 

The Company designs and manufactures its advanced composite materials to its own specifications and to the specifications of its customers. Product development efforts are focused on developing prepreg materials that meet the specifications of the customers. The materials used in the manufacture of these engineered materials include graphite and carbon fibers and fabrics, aramids, such as Kevlar® ("Kevlar" is a registered trademark of E.I. du Pont de Nemours & Co.) and Twaron® (“Twaron” is a registered trademark of Teijin Twaron B.V. LLC), quartz, fiberglass, polyester, specialty chemicals, resins, films, plastics, adhesives and certain other synthetic materials. The Company purchases these materials from several suppliers. Substitutes for many of these materials are not readily available. The qualification and certification of advanced composite materials for certain FAA certified aircraft typically include specific requirements for raw material supply and may restrict the Company’s flexibility in qualifying alternative sources of supply for certain key raw materials. The Company continues to work to determine acceptable alternatives for several raw materials.

 

The Company manufactures composite parts and assemblies primarily to its customers’ specifications using its own composite materials or composite materials supplied by third parties, based on the specific requirements of the Company’s customers.

 

Advanced Composite Materials, Parts and Assemblies – Competition

 

The Company has many competitors in the advanced composite materials, parts and assemblies markets, ranging in size from large international corporations to small regional producers. Several of the Company’s largest competitors are vertically integrated, producing raw materials, such as carbon fiber and cloth, as well as composite parts and assemblies. Some of the Company’s competitors may also serve as a supplier to the Company. The Company competes for business primarily on the basis of responsiveness, product performance and consistency, product qualification, FAA data base design allowables and innovative new product development.

 

 
8

 

 

Printed Circuit Materials

 

Printed Circuit Materials - Operations

 

The Company is also a leading global designer and manufacturer of advanced printed circuit materials used to fabricate complex multilayer printed circuit boards and other electronic interconnection systems, such as multilayer back-planes, wireless packages, high-speed/low-loss multilayers and high density interconnects (“HDIs”). The Company’s multilayer printed circuit materials consist of copper-clad laminates and prepregs, which is an acronym for pre-impregnated material. The Company has long-term relationships with its major customers, which include leading independent printed circuit board fabricators, electronic manufacturing service companies, electronic contract manufacturers and major electronic original equipment manufacturers ("OEMs"). Multilayer printed circuit boards and interconnect systems are used in virtually all advanced electronic equipment to direct, sequence and control electronic signals between semiconductor devices (such as microprocessors and memory and logic devices), passive components (such as resistors and capacitors) and connection devices (such as infra-red couplings, fiber optics, compliant pin and surface mount connectors). Examples of end uses of the Company’s digital printed circuit materials include high speed routers and servers, telecommunications switches, storage area networks, supercomputers, satellite switching equipment and wireless local area networks ("LANs"). The Company's RF/microwave printed circuit materials are used primarily for military avionics, antennas, power amplifiers and other components for cellular telephone base stations, automotive adaptive cruise control systems and avionic communications equipment. The Company has developed long-term relationships with major customers as a result of its leading edge products, extensive technical and engineering service support and responsive manufacturing capabilities.

 

Park believes it founded the modern day printed circuit industry in 1957 by inventing a composite material consisting of an epoxy resin substrate reinforced with fiberglass cloth which was laminated together with sheets of thin copper foil. This epoxy-glass copper-clad laminate system is still used to construct the large majority of today’s advanced printed circuit products. The Company also believes that in 1962 it invented the first multilayer printed circuit materials system used to construct multilayer printed circuit boards. The Company also pioneered vacuum lamination and many other manufacturing technologies used in the industry today. The Company believes it is one of the industry’s technological leaders.

 

The Company believes that it is one of only a few significant independent manufacturers of high performance multilayer printed circuit materials in the world. The Company was the first manufacturer in the printed circuit materials industry to establish manufacturing presences in the three major global markets of North America, Europe and Asia, with facilities established in Europe in 1969 and Asia in 1986.

 

Printed Circuit Materials – Industry Background

 

The printed circuit materials manufactured by the Company and its competitors are used primarily to construct and fabricate complex multilayer printed circuit boards and other advanced electronic interconnection systems. Multilayer printed circuit materials consist of prepregs and copper-clad laminates. Prepregs are chemically and electrically engineered thermosetting or thermoplastic resin systems which are impregnated into and reinforced by a specially manufactured fiberglass cloth product or other woven or non-woven reinforcing fiber. This insulating dielectric substrate generally is 0.125 inch to 0.001 inch in thickness. While these resin systems historically have been based on epoxy resin chemistry, in recent years, increasingly demanding OEM requirements have driven the industry to utilize proprietary enhanced epoxies as well as other higher performance resins, such as phenolic, bismalimide triazine ("BT"), cyanate ester, standard and enhanced non-Methylene Dianiline (“MDA”) polyimide, allylated polyphenylene ether (“APPE”) or polytetrafluoroethylene ("PTFE"). One or more plies of prepreg are laminated together to form an insulating dielectric substrate to support the copper circuitry patterns of a multilayer printed circuit board. Copper-clad laminates consist of one or more plies of prepreg with each ply laminated on the top and bottom with specialty thin copper foil. Copper foil is specially formed in thin sheets which may vary from 0.0056 inch to 0.0002 inch in thickness and normally have a thickness of 0.0014 inch or 0.0007 inch. The Company supplies both copper-clad laminates and prepregs to its customers, which use these products as a system to construct multilayer printed circuit boards.

 

 
9

 

 

The printed circuit board fabricator processes copper-clad laminates to form the inner layers of a multilayer printed circuit board. The fabricator photo images these laminates with a dry film or liquid photoresist. After development of the photoresist, the copper surfaces of the laminate are etched to form the circuit pattern. The fabricator then assembles these etched laminates by inserting one or more plies of dielectric prepreg between each of the inner layer etched laminates and also between an inner layer etched laminate and the outer layer copper plane, and then laminating the entire assembly in a press. Prepreg serves as the insulator and bond between the multiple layers of copper circuitry patterns found in the multilayer circuit board. When the multilayer configuration is laminated, these plies of prepreg form an insulating dielectric substrate supporting and separating the multiple inner and outer planes of copper circuitry. The fabricator drills vertical through-holes or vias in the multilayer assembly and then plates the through-holes or vias to form vertical conductors between the multiple layers of circuitry patterns. These through-holes or vias combine with the conductor paths on the horizontal circuitry planes to create a three-dimensional electronic interconnect system. In specialized applications, an additional set of microvia layers (2 or 4, typically) may be added through a secondary lamination process to provide increased density and functionality to the design. The outer two layers of copper foil are then imaged and etched to form the finished multilayer printed circuit board. The completed multilayer board is a three-dimensional interconnect system with electronic signals traveling in the horizontal planes of multiple layers of copper circuitry patterns, as well as in the vertical planes through the plated holes or vias.

 

Semiconductor manufacturers have introduced successive generations of more powerful microprocessors and memory and logic devices. Electronic equipment manufacturers have designed these advanced semiconductors into more compact products. High performance computing devices in these smaller platforms require greater reliability, faster signal speeds, closer tolerances, higher component and circuit density and increased overall complexity. As a result, the interconnect industry has developed smaller, lighter, faster and more cost-effective interconnect systems, including advanced multilayer printed circuit boards.

 

Advanced interconnect systems require higher technology printed circuit materials to ensure the performance and reliability of the electronic system and to improve the manufacturability of the interconnect platform. Printed circuit board fabricators and electronic equipment manufacturers require advanced printed circuit materials that have increasingly higher temperature tolerances and more advanced and stable electrical properties in order to support high-speed computing in a miniaturized and often portable environment. Temperature tolerance was further emphasized by the advent of lead-free assemblies.

 

The uniformity, purity, consistency, performance predictability, dimensional stability and production tolerances of printed circuit materials have become successively more critical due to the very high density circuit demands of miniaturized high performance interconnect systems. High density printed circuit boards and interconnect systems often involve higher layer count multilayer circuit boards where the multiple planes of circuitry and dielectric insulating substrates are very thin (dielectric insulating substrate layers may be 0.002 inch or less) and the circuit line and space geometries in the circuitry plane are very narrow (0.002 inch or less). In addition, advanced surface mount interconnect systems are typically designed with very small pad sizes and very small plated through-holes or vias which electrically connect the multiple layers of circuitry planes, and these interconnect systems frequently make use of multiple lamination cycles and/or laser drilled vias. High density interconnect systems must utilize printed circuit materials whose dimensional characteristics and purity are consistently manufactured to very high tolerance levels in order for the printed circuit board fabricator to attain and sustain acceptable product yields.

 

 
10

 

 

Shorter product life cycles and competitive pressures have induced electronic equipment manufacturers to bring new products to market and increase production volume to commercial levels more quickly. These trends have highlighted the importance of front-end engineering of electronic products and have increased the level of collaboration among system designers, fabricators and printed circuit materials suppliers. As the complexity of electronic products increases, materials suppliers must provide greater technical support to interconnect systems fabricators on a timely basis regarding manufacturability and performance of new materials systems.

 

Printed Circuit Materials – Products and Services

 

The Company produces a broad line of advanced printed circuit materials used to fabricate complex multilayer printed circuit boards and other electronic interconnect systems, including backplanes, high speed/low loss multilayers and high density interconnects (“HDIs”). The Company’s diverse advanced printed circuit materials product line is designed to address a wide array of end-use applications and performance requirements.

 

The Company’s printed circuit materials products have been developed internally and through long-term development projects with its principal suppliers and, to a lesser extent, through licensing arrangements. The Company focuses its research and development efforts on developing industry leading product technology to meet the most demanding product requirements and has designed its product line with a focus on the higher performance, higher technology end of the materials spectrum.

 

The Company’s products utilize, among other things, high-speed, low-loss, engineered formulations, high-temperature modified epoxies, phenolics, BT epoxies, MDA polyimides, enhanced polyimides, APPE, SI® (Signal Integrity) products, cyanate esters and PTFE formulations for RF/microwave applications.

 

The Company’s high performance printed circuit materials consist of high-speed, low-loss Cathodic Anodic Filament (“CAF”) resistant materials for digital and RF/microwave applications requiring lead-free compatibility and high bandwidth signal integrity, BT materials, polyimides for applications that demand extremely high thermal performance, cyanate esters, quartz reinforced materials, and PTFE and modified epoxy materials for RF/microwave systems that operate at frequencies up to at least 79 GHz.

 

The Company has developed long-term relationships with select customers through broad-based technical support and service, as well as manufacturing proximity and responsiveness at multiple levels of the customer’s organization. The Company focuses on developing a thorough understanding of its customers’ businesses, product lines, processes and technological challenges. The Company seeks customers which are industry leaders committed to maintaining and improving their industry leadership positions and which are committed to long-term relationships with their suppliers. The Company also seeks business opportunities with the more advanced printed circuit fabricators and electronic equipment manufacturers who are interested in maximizing the full value of the products and services provided by their suppliers. The Company believes its proactive and timely support in assisting its customers with the integration of advanced materials technology into new product designs further strengthens its relationships with its customers.

 

The Company’s emphasis on service and close relationships with its customers is reflected in its short lead times. The Company has developed its manufacturing processes and customer service organizations to provide its customers with printed circuit materials products on a just-in-time basis. The Company believes that its ability to meet its customers' customized manufacturing and quick-turn-around ("QTA") requirements is one of its unique strengths.

 

 
11

 

 

Printed Circuit Materials – Customers and End Markets

 

The Company’s customers for its advanced printed circuit materials include the leading independent printed circuit board fabricators, electronic manufacturing service (“EMS”) companies, electronic contract manufacturers (“ECMs”) and major electronic OEMs in the computer, networking, telecommunications, wireless communications, aerospace, military, instrumentation and automotive industries located throughout North America, Europe and Asia. The Company seeks to align itself with the larger, more technologically-advanced and better capitalized independent printed circuit board fabricators and major electronic equipment manufacturers which are industry leaders committed to maintaining and improving their industry leadership positions and to building long-term relationships with their suppliers. The Company’s selling effort typically involves several stages and relies on the talents of Company personnel at different levels, from management to sales personnel and quality engineers. The Company augments its sales personnel with an OEM marketing team and process and product technology specialists.

 

During the Company’s 2017 fiscal year, 16.2% of the Company's total worldwide sales were to TTM Technologies, Inc., a leading manufacturer of printed circuit boards. During the Company’s 2016 fiscal year, approximately 13.8% of the Company's total worldwide sales were to TTM Technologies, Inc. During the Company’s 2015 fiscal year, the Company did not have sales to any customer that equaled or exceeded 10% of the Company’s total worldwide sales. During the Company’s 2017 and 2016 fiscal years, sales to no other customer of the Company equaled or exceeded 10% of the Company’s total worldwide sales.

 

Although the Company’s printed circuit materials business is not dependent on any single customer, the loss of a major customer or of a group of customers could have a material adverse effect on the Company’s business or its consolidated results of operations or financial position.

 

The Company’s printed circuit materials products are marketed primarily by sales personnel and, to a lesser extent, by independent distributors and independent sales representatives in Europe and Asia.

 

Printed Circuit Materials – Manufacturing

 

The process for manufacturing multilayer printed circuit materials is capital intensive and requires sophisticated equipment as well as clean-room environments. The key steps in the Company’s manufacturing process include: the impregnation of specially designed fiberglass cloth with a specially designed resin system and the partial curing of that resin system; the assembling of laminates consisting of single or multiple plies of prepreg and copper foil in a clean-room environment; the vacuum lamination of the copper-clad assemblies under simultaneous exposure to heat, pressure and vacuum; and the finishing of the laminates to customer specifications.

 

Prepreg is manufactured in a treater. A treater is a roll-to-roll continuous machine which sequences specially designed fiberglass cloth or other reinforcement fabric into a resin tank and then sequences the resin-coated cloth through a series of ovens which partially cure the resin system into the cloth. This partially cured product or prepreg is then sheeted or paneled and packaged by the Company for sale to customers, or used by the Company to construct its copper-clad laminates.

 

 
12

 

 

The Company manufactures copper-clad laminates by first setting up in a clean room an assembly of one or more plies of prepreg stacked together with a sheet of specially manufactured copper foil on the top and bottom of the assembly. This assembly, together with a large quantity of other laminate assemblies, is then inserted into a large, multiple opening vacuum lamination press. The laminate assemblies are then laminated under simultaneous exposure to heat, pressure and vacuum. After the press cycle is complete, the laminates are removed from the press and sheeted, sheared and finished to customer specifications. The product is then inspected and packaged for shipment to the customer.

 

The Company manufactures multilayer printed circuit materials at fully integrated facilities located in the United States, Europe and Southeast Asia. The Company opened its California facility in 1965, its Arizona facility in 1984, its Singapore facility in 1986 and its France facility in 1992. The Company services the North American market principally through its United States manufacturing facilities, the European market principally through its manufacturing facilities in the United States and in France, and the Asian market principally through its Singapore manufacturing facility. By maintaining technical and engineering staffs at each of its manufacturing facilities, the Company is able to deliver fully-integrated products and services on a timely basis. On April 18, 2017, the Company announced the consolidation of its Nelco Products, Inc. business unit located in California and its Neltec, Inc. business unit located in Arizona. When completed, all manufacturing at the Fullerton, California facility will cease, except for treating operations, which will continue as part and under the supervision of the Neltec, Inc. business unit.

 

Printed Circuit Materials – Materials and Sources of Supply

 

The principal materials used in the manufacture of the Company’s printed circuit materials products are specially manufactured copper foil, fiberglass and quartz cloth and synthetic reinforcements, and specially formulated resins and chemicals. The Company develops and maintains close working relationships with suppliers of these materials who have dedicated themselves to complying with the Company’s stringent specifications and technical requirements. While the Company’s philosophy is to work with a limited number of suppliers, the Company has identified alternate sources of supply for many, but not all, of these materials. However, there are a limited number of qualified suppliers of these materials, in some cases substitutes for these materials are not always readily available, and, in the past, the industry has experienced shortages in the market for certain of these materials. While the Company considers its relationships with its suppliers to be strong, a shortage of these materials or a disruption of the supply of materials caused by a natural disaster, such as the temporary disruption caused by the earthquake and tsunami in Japan in March 2011, or otherwise, could materially increase the Company’s cost of operations and could materially adversely affect the business and results of operations of the Company.

 

Significant increases in the cost of materials purchased by the Company could also have a material adverse effect on the Company’s business and results of operations if the Company were unable to pass such increases through to its customers. During the 2017, 2016 and 2015 fiscal years, the Company experienced significant volatility in the cost of copper foil, one of the Company’s primary raw materials. The Company generally passes changes in the costs of its raw materials through to its customers.

 

 
13

 

 

Printed Circuit Materials – Competition

 

The multilayer printed circuit materials industry is characterized by intense competition and ongoing consolidation. The Company’s competitors are primarily divisions or subsidiaries of very large, diversified multinational manufacturers which are substantially larger and have greater financial resources than the Company and, to a lesser degree, smaller regional producers. Because the Company focuses on the higher technology segment of the printed circuit materials market, technological innovation, quality and service, as well as price, are significant competitive factors.

 

The Company believes that there are several significant multilayer printed circuit materials manufacturers in the world and many of these competitors have significant presences in the three major global markets of North America, Europe and Asia. The Company believes that it is one of only a few significant independent manufacturers of multilayer printed circuit materials in the world today.

 

The markets in which the Company’s printed circuit materials operations compete are characterized by rapid technological advances, and the Company’s position in these markets depends largely on its continued ability to develop technologically advanced and highly specialized products. Although the Company believes it is an industry technology leader and directs a significant amount of its time and resources toward maintaining its technological competitive advantage, there is no assurance that the Company will be technologically competitive in the future, or that the Company will continue to develop new products that are technologically competitive.

 

Backlog

 

The Company considers an item as backlog when it receives a purchase order specifying the number of units to be purchased, the purchase price, specifications and other customary terms and conditions. At May 1, 2017, the unfilled portion of all purchase orders received by the Company and believed by it to be firm was $14,642,952, compared to $17,901,725 at May 1, 2016. A major portion of the Company’s backlog consists of composite materials.

 

Various factors contribute to the size of the Company’s backlog. Accordingly, the foregoing information may not be indicative of the Company’s results of operations for any period subsequent to the fiscal year ended February 26, 2017.

 

Patents and Trademarks

 

The Company holds several patents and trademarks or licenses thereto. In the Company’s opinion, some of these patents and trademarks are important to its products. Generally, however, the Company does not believe that an inability to obtain new; or to defend existing, patents and trademarks would have a material adverse effect on the Company.

 

Employees

 

At February 26, 2017, the Company had 426 employees. Of these employees, 370 were engaged in the Company’s manufacturing operations, and 56 consisted of executive, sales and marketing and research and development personnel and general administrative staff.

 

Environmental Matters

 

The Company is subject to stringent environmental regulation of its use, storage, treatment and disposal of hazardous materials and the release of emissions into the environment. The Company believes that it currently is in substantial compliance with the applicable Federal, state and local and foreign environmental laws and regulations to which it is subject and that continuing compliance therewith will not have a material effect on its capital expenditures, earnings or competitive position. The Company does not currently anticipate making material capital expenditures for environmental control facilities for its existing manufacturing operations during the remainder of its current fiscal year or its succeeding fiscal year. However, developments, such as the enactment or adoption of even more stringent environmental laws and regulations, could conceivably result in substantial additional costs to the Company.

 

 
14

 

 

The Company and certain of its subsidiaries have been named by the Environmental Protection Agency (the “EPA”) or a comparable state agency under the Comprehensive Environmental Response, Compensation and Liability Act (the “Superfund Act”) or similar state law as potentially responsible parties in connection with alleged releases of hazardous substances at four sites.

 

Under the Superfund Act and similar state laws, all parties who may have contributed any waste to a hazardous waste disposal site or contaminated area identified by the EPA or comparable state agency may be jointly and severally liable for the cost of cleanup. Generally, these sites are locations at which numerous persons disposed of hazardous waste. In the case of the Company’s subsidiaries, generally the waste was removed from their manufacturing facilities and disposed at the waste sites by various companies which contracted with the subsidiaries to provide waste disposal services. Neither the Company nor any of its subsidiaries has been accused of or charged with any wrongdoing or illegal acts in connection with any such sites. The Company believes it maintains an effective and comprehensive environmental compliance program. Management believes the ultimate disposition of known environmental matters will not have a material adverse effect on the liquidity, capital resources, business, consolidated results of operations or financial position of the Company.

 

See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Environmental Matters” included in Item 7 of Part II of this Report and Note 12 of the Notes to Consolidated Financial Statements included in Item 8 of Part II of this Report.

 

ITEM 1A. RISK FACTORS.

 

The business of the Company faces numerous risks, including those set forth below or those described elsewhere in this Form 10-K Annual Report or in the Company's other filings with the Securities and Exchange Commission. The risks described below are not the only risks that the Company faces, nor are they necessarily listed in order of significance. Other risks and uncertainties may also affect the Company’s business. Any of these risks may have a material adverse effect on the Company's business, financial condition, results of operations or cash flow.

 

The industries in which the Company operates are undergoing technological changes, and the Company's business could suffer if the Company is unable to adjust to these changes.

 

The Company's operating results could be negatively affected if the Company were unable to maintain and increase its technological and manufacturing capability and expertise. Rapid technological advances in semiconductors and electronic equipment have placed rigorous demands on the printed circuit materials manufactured by the Company and used in printed circuit board production.

 

 
15

 

 

The industries in which the Company operates are very competitive.

 

Certain of the Company's principal competitors are substantially larger and have greater financial resources than the Company, and the Company's operating results will be affected by its ability to maintain its competitive positions in these industries. The printed circuit materials, advanced composite materials and composite parts and assemblies industries are intensely competitive and the Company competes worldwide in the markets for such products.

 

The Company is vulnerable to an increase in the cost of gas or electricity.

 

Changes in the cost or availability of gas or electricity could materially increase the Company's cost of operations. The Company's production processes require the use of substantial amounts of gas and electricity, the cost and available supply of which are beyond the control of the Company.

 

The Company is vulnerable to disruptions and shortages in the supply of, and increases in the prices of, certain raw materials.

 

There are a limited number of qualified suppliers of the principal materials used by the Company in its manufacture of printed circuit materials, advanced composite materials and composite parts and assemblies. The Company has qualified alternate sources of supply for many, but not all, of its raw materials, but certain raw materials are produced by only one supplier. In some cases, substitutes for certain raw materials are not always readily available, and in the past there have been shortages in the market for certain of these materials. Raw material substitutions for certain aircraft related products may require governmental (such as Federal Aviation Administration) approval. While the Company considers its relationships with its suppliers to be strong, a shortage of these materials or a disruption of the supply of these materials caused by a natural disaster, such as the earthquake and tsunami in Japan in March 2011, or otherwise could materially increase the Company’s cost of operations and could materially adversely affect the business and results of operations of the Company. Likewise, significant increases in the cost of materials purchased by the Company could also materially increase the Company’s cost of operations and could have a material adverse effect on the Company’s business and results of operations if the Company were unable to pass such increases through to its customers. The Company experienced a supply chain issue as a result of the earthquake and tsunami in Japan in March 2011. Such issue was resolved during the 2012 fiscal year third quarter.

 

During the 2017, 2016 and 2015 fiscal years, the Company experienced significant volatility in the cost of copper foil, one of the Company’s primary raw materials. The Company generally passes changes in the costs of its raw materials through to its customers. See “Business—Printed Circuit Materials—Materials and Sources of Supply” in Item 1 of Part I of this Report and “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in Item 7 of Part II of this Report.

 

The Company's customer base is highly concentrated, and the loss of one or more customers could adversely affect the Company's business.

 

A loss of one or more key customers could adversely affect the Company's profitability. The Company's customer base is concentrated, in part, because the Company's business strategy has been to develop long-term relationships with a select group of customers. During the Company's fiscal years ended February 26, 2017, February 28, 2016 and March 1, 2015, the Company's ten largest customers accounted for approximately 48%, 51% and 53%, respectively, of net sales. The Company expects that sales to a relatively small number of customers will continue to account for a significant portion of its net sales for the foreseeable future. See "Business—Printed Circuit Materials—Customers and End Markets” and “Business—Advanced Composite Materials, Parts and Assemblies—Customers and End Markets” in Item 1 of Part I of this Report.

 

 
16

 

 

The Company's business is dependent on the electronics and aerospace industries, which are cyclical in nature.

 

The electronics and aerospace industries are cyclical and have experienced recurring cycles. The downturns can be unexpected and have often reduced demand for, and prices of, printed circuit materials and advanced composite materials, parts and assemblies. This potential reduction in demand and prices could have a negative impact on the Company’s business.

 

In addition, the Company is subject to the effects of general regional and global economic and financial conditions.

 

The Company relies on short-term orders from its customers.

 

A variety of conditions, both specific to the individual customer and generally affecting the customer’s industry, can cause a customer to reduce or delay orders previously anticipated by the Company, which could negatively impact the Company’s business. In the printed circuit materials market, the Company typically does not obtain long-term purchase orders or commitments. Instead, it relies primarily on continual communication with its customers to anticipate the future volume of purchase orders.

 

The Company’s customers may require the Company to undergo a lengthy and expensive qualification process with respect to its products, with no assurance of sales. Any delay or failure in such qualification process could negatively affect the Company’s business and operating results.

 

The Company’s customers frequently require that the Company’s products undergo an extensive qualification process, which may include testing for performance, structural integrity and reliability. This qualification process may be lengthy and does not assure any sales of the product to that customer. The Company devotes substantial resources, including design, engineering, sales, marketing and management efforts, and often substantial expense, to qualifying the Company’s products with customers in anticipation of sales. Any delay or failure in qualifying any of its products with a customer may preclude or delay sales of those products to the customer, which may impede the Company’s growth and cause its business to suffer.

 

In addition, the Company engages in product development efforts with OEMs. The Company will not recover the cost of this product development directly even if the Company actually produces and sells any resulting product. There can be no guarantee that such efforts will result in any sales.

 

Consolidation among the Company’s customers could negatively impact the Company’s business.

 

A number of the Company’s customers have combined in recent years and consolidation of other customers may occur. If an existing customer is not the controlling entity following a combination, the Company may not be retained as a supplier. While there is potential for increasing the Company’s position with the combined customer, the Company’s revenues may decrease if the Company is not retained as a supplier.

 

 
17

 

 

The Company faces extensive capital expenditure costs.

 

The Company’s business is capital intensive and, in addition, the introduction of new technologies could substantially increase the Company’s capital expenditures. In order to remain competitive the Company must continue to make significant investments in capital equipment and expansion of operations, which could adversely affect the Company’s results of operations.

 

The Company’s international operations are subject to different and additional risks than the Company’s domestic operations.

 

The Company’s international operations are subject to various risks, including unexpected changes in regulatory requirements, foreign currency exchange rates, tariffs and other barriers, political and economic instability, potentially adverse tax consequences, and any impact on economic and financial conditions around the world resulting from geopolitical conflicts or acts of terrorism, all of which could negatively impact the Company’s business. A portion of the sales and costs of the Company’s international operations are denominated in currencies other than the U.S. dollar and may be affected by fluctuations in currency exchange rates.

 

The Company is subject to a variety of environmental regulations.

 

The Company’s production processes require the use, storage, treatment and disposal of certain materials which are considered hazardous under applicable environmental laws, and the Company is subject to a variety of regulatory requirements relating to the handling of such materials and the release of emissions and effluents into the environment, non-compliance with which could have a negative impact on the Company’s business or consolidated results of operations. Other possible developments, such as the enactment or adoption of additional environmental laws, could result in substantial costs to the Company.

 

If the Company’s efforts to protect its trade secrets are not sufficient, the Company may be adversely affected.

 

The Company’s business relies upon proprietary information, trade secrets and know-how in its product formulations and its manufacturing and research and development activities. The Company takes steps to protect its proprietary rights and information, including the use of confidentiality and other agreements with employees and consultants and in commercial relationships, including with distributors and customers. If these steps prove to be inadequate or are violated, the Company’s competitors might gain access to the Company’s trade secrets, and there may be no adequate remedy available to the Company.

 

The Company depends upon the experience and expertise of its senior management team and key technical employees, and the loss of any key employee may impair the Company’s ability to operate effectively.

 

The Company’s success depends, to a certain extent, on the continued availability of its senior management team and key technical employees. Each of the Company’s executive officers, key technical personnel and other employees could terminate his or her employment at any time. The loss of any member of the Company’s senior management team might significantly delay or prevent the achievement of the Company’s business objectives and could materially harm the Company’s business and customer relationships. In addition, because of the highly technical nature of the Company’s business, the loss of any significant number of the Company’s key technical personnel could have a material adverse effect on the Company.

 

 
18

 

 

ITEM 1B. UNRESOLVED STAFF COMMENTS.

 

None.

 

ITEM 2. PROPERTIES.

 

Set forth below are the locations of the significant properties owned and leased by the Company, the businesses which use the properties and the size of each such property. All of such properties, except for the Melville, New York property, are used principally as manufacturing and warehouse facilities.

 

Location

 

Owned or

Leased

 

Use

 

Size (Square

Footage)

             

Melville, NY

 

Leased

 

Administrative Offices

 

              8,000

Fullerton, CA

 

Leased

 

Printed Circuit Materials

 

            95,000

Anaheim, CA

 

Leased

 

Printed Circuit Materials

 

            26,000

Tempe, AZ

 

Leased

 

Printed Circuit Materials

 

            81,000

Lannemezan, France

 

Owned

 

Printed Circuit Materials

 

            29,000

Singapore

 

Leased

 

Printed Circuit Materials

 

            88,000

Newton, KS

 

Leased

 

Advanced Composite Materials, Parts and Assemblies

 

            89,000

Singapore

 

Leased

 

Advanced Composite Materials

 

            21,000

 

The Company believes its facilities and equipment to be in good condition and reasonably suited and adequate for its current needs. Most of the Company’s manufacturing facilities have the capacity to substantially increase their production levels.

 

On April 18, 2017, the Company announced the consolidation of its Nelco Products, Inc. business unit located in California and its Neltec, Inc. business unit located in Arizona. When completed, all manufacturing at the Fullerton, California facility will cease, except for treating operations, which will continue as part and under the supervision of the Neltec, Inc. business unit.

 

 

ITEM 3. LEGAL PROCEEDINGS.

 

None.     

 

ITEM 4. MINE SAFETY DISCLOSURES.

 

None.

 

 
19

 

 

Executive Officers of the Registrant.

 

Name

Title

Age

     

Brian E. Shore

Chief Executive Officer  and Chairman of the Board of Directors

65

     

Christopher T. Mastrogiacomo

President and Chief Operating Officer

59

     
Stephen E. Gilhuley Executive Vice President – Administration and Secretary 72
     

P. Matthew Farabaugh

Senior Vice President and Chief Financial Officer 

56

     

Constantine Petropoulos

Vice President and General Counsel

39

     

Mark A. Esquivel

Vice President – Aerospace 

44

 

 

Mr. Shore has served as a Director of the Company since 1983 and as Chairman of the Board of Directors since July 2004. He was elected a Vice President of the Company in January 1993, Executive Vice President in May 1994, President in March 1996, and Chief Executive Officer in November 1996. He was President until July 28, 2014, when he was succeeded by Mr. Mastrogiacomo. Mr. Shore also served as General Counsel of the Company from April 1988 until April 1994.

 

Mr. Mastrogiacomo was elected President and Chief Operating Officer on July 28, 2014 after having served as Executive Vice President and Chief Operating Officer since June 1, 2011 and as Senior Vice President of Strategic Marketing since December 8, 2010. Prior to joining the Company as Vice President of Strategic Marketing in September 2010, Mr. Mastrogiacomo held senior management positions with Sanmina-SCI Corporation, a leading electronics contract manufacturing services company, and its predecessor, Hadco Corporation, a major manufacturer of advanced electronic interconnect systems. Since 2008, Mr. Mastrogiacomo was Senior Vice President, Printed Wiring Board (USA) of Sanmina-SCI Corporation; from 2004 to 2008, he was Senior Vice President of Operations, the Americas Enclosures Systems of Sanmina-SCI; and from 2000 to 2004, he was Senior Vice President, Printed Wiring Board Operations of Sanmina-SCI. During the twelve years prior to 1997, he held several management positions with Hadco Corporation.

 

Mr. Gilhuley was elected Executive Vice President – Administration on April 5, 2012, and he has been Secretary of the Company since July 1996. Prior to April 5, 2012, he had been Executive Vice President of the Company since October 2006 and Senior Vice President from March 2001 to October 2006. He also was General Counsel of the Company from April 1994 to October 2011, when he was succeeded by Stephen M. Banker, who was Vice President and General Counsel from October 2011 to May 2014 and who was succeeded by Mr. Petropoulos.

 

Mr. Farabaugh was elected Senior Vice President and Chief Financial Officer on March 11, 2016. He had been Vice President and Chief Financial Officer of Park Electrochemical Corp. since April 2012.  He had been Vice President and Controller of the Company since October 2007. Prior to joining the Company, Mr. Farabaugh was Corporate Controller of American Technical Ceramics, a publicly traded international company and a manufacturer of electronic components, located in Huntington Station, New York, from 2004 to September 2007 and Assistant Controller from 2000 to 2004. Prior thereto, Mr. Farabaugh was Assistant Controller of Park Electrochemical Corp. from 1989 to 2000. Prior to joining Park in 1989, Mr. Farabaugh had been a senior accountant with KPMG.

 

 
20

 

 

Mr. Petropoulos was elected Vice President and General Counsel on September 4, 2014. Prior to joining the Company, Mr. Petropoulos had been Managing Attorney at Scientific Games Corporation in New York City since November 2011. From September 2007 to October 2011, he was Senior Corporate Counsel, Finance & Strategic Development at Coca-Cola HBC SA in Attica, Greece; and from October 2002 to September 2007 he was an attorney at Latham & Watkins LLP in New York City.

 

Mr. Esquivel was appointed Vice President – Aerospace of the Company in April 2015. Mr. Esquivel was also appointed as President of the Company’s PATC business unit in Newton, Kansas. Mr. Esquivel has been employed by the Company and its subsidiaries in various positions since 1994. He was Vice President of Aerospace Composite Parts of PATC from March 2012 to April 2015 and President of PATC from June 2010 to March 2012. Prior to June 2010, Mr. Esquivel was Vice President and General Manager of Neltec, Inc., the Company’s high-technology circuitry materials business unit located in Tempe, Arizona, and responsible for the day-to-day operations of Neltec, Inc., since his appointment to that position in September 2008. He served as Manufacturing Manager of Neltec, Inc. from August 2004 to September 2008 and as Materials Manager from February 2001 to August 2004, and he held various positions since he originally joined Neltec, Inc. in 1994.

 

There are no family relationships between the directors or executive officers of the Company.

 

Each executive officer of the Company serves at the pleasure of the Board of Directors of the Company.

 

 
21

 

 

PART II

 

ITEM 5. MARKET FOR THE REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.

 

The Company’s Common Stock is listed and trades on the New York Stock Exchange (trading symbol PKE). (The Common Stock also trades on the Chicago Stock Exchange.) The following table sets forth, for each of the quarterly periods indicated, the high and low sales prices for the Common Stock as reported on the New York Stock Exchange Composite Tape and dividends declared on the Common Stock.

 

For the Fiscal Year Ended

 

Stock Price

   

Dividends

 

February 26, 2017

 

High

   

Low

   

Declared

 
                         

First Quarter

  $ 16.82     $ 14.06     $ 0.10  

Second Quarter

    17.50       14.05       0.10  

Third Quarter

    18.76       13.76       0.10  

Fourth Quarter

    19.83       17.56       0.10  

 

For the Fiscal Year Ended

 

Stock Price

   

Dividends

 

February 28, 2016

 

High

   

Low

   

Declared

 
                         

First Quarter

  $ 23.63     $ 20.30     $ 0.10  

Second Quarter

    22.58       16.60       0.10  

Third Quarter

    18.58       16.08       0.10  

Fourth Quarter

    17.74       13.65       0.10  

 

 

As of May 5, 2017, there were 575 holders of record of Common Stock.

 

The Company expects, for the immediate future, to continue to pay regular cash dividends.

 

 
22

 

 

The following table provides information with respect to shares of the Company’s Common Stock acquired by the Company during each month included in the Company’s 2017 fiscal year fourth quarter ended February 26, 2017.

 

Period

 

Total Number

of Shares (or

Units)

Purchased

   

Average Price

Paid Per

Share (or

Unit)

   

Total Number of

Shares (or Units)

Purchased As

Part of Publicly

Announced

Plans or

Programs

 

Maximum Number

(or Approximate

Dollar Value) of

Shares (or Units)

that May Yet Be

Purchased Under

the Plans or

Programs

                           

November 28 - December 26

    0     $ -       0    
                           

December 27 - January 26

    0     $ -       0    
                           

January 27 - February 26

    0     $ -       0    
                           

Total

    0     $ -       0  

1,531,412 (a)

 

 

(a)

Aggregate number of shares available to be purchased by the Company pursuant to share purchase authorizations announced on January 8, 2015 and March 10, 2016. Pursuant to such authorizations, the Company is authorized to purchase its shares from time to time on the open market or in privately negotiated transactions.

 

As a result of the authorizations announced on January 8, 2015 and March 10, 2016, the Company is authorized to purchase up to a total of 1,531,412 shares of its common stock, representing approximately 7.6% of the Company’s 20,234,671 total outstanding shares as of the close of business on May 5, 2017.

 

As previously announced by the Company, shares purchased by the Company will be retained as treasury stock and will be available for use under the Company’s stock option plan and for other corporate purposes.

 

 
23

 

 

ITEM 6. SELECTED FINANCIAL DATA.

 

The following selected consolidated financial data of Park and its subsidiaries is qualified by reference to, and should be read in conjunction with, the Consolidated Financial Statements, related Notes, and Management’s Discussion and Analysis of Financial Condition and Results of Operations contained elsewhere herein. Insofar as such consolidated financial information relates to the five fiscal years ended February 26, 2017 and is as of the end of such periods, it is derived from the Consolidated Financial Statements for each of the five fiscal years ended February 26, 2017 and as of such dates audited by the Company’s independent registered public accounting firms. The Consolidated Financial Statements as of February 26, 2017 and February 28, 2016, and for each of the three years in the period ended February 26, 2017, February 28, 2016 and March 1, 2015, together with the report of the independent registered public accounting firm for the years ended February 26, 2017, February 28, 2016 and March 1, 2015, appear in Item 8 of Part II of this Report.

 

   

Fiscal Year Ended

 
   

(Amounts in thousands, except per share amounts)

 
   

February 26,

   

February 28,

   

March 1,

   

March 2,

   

March 3,

 
   

2017

   

2016

   

2015

   

2014

   

2013

 
                                         

STATEMENT OF EARNINGS INFORMATION

                                       
                                         

Net sales

  $ 114,609     $ 145,855     $ 162,086     $ 165,764     $ 176,416  

Cost of sales

    84,568       103,103       113,133       117,664       125,866  

Gross profit

    30,041       42,752       48,953       48,100       50,550  

Selling, general and administative expenses

    19,739       21,211       24,373       25,168       26,595  

Restructuring charges

    313       535       1,179       546       3,703  

Earnings from operations

    9,989       21,006       23,401       22,386       20,252  

Interest expense

    1,432       1,657       1,438       764       14  

Interest and other income

    1,704       1,149       827       460       647  

Earnings before income taxes

    10,261       20,498       22,790       22,082       20,885  

Income tax provision

    978       2,469       2,747       64,411       3,924  

Net earnings (loss)

  $ 9,283     $ 18,029     $ 20,043     $ (42,329 )   $ 16,961  
                                         

Earnings per share:

                                       

Basic earnings (loss) per share

  $ 0.46     $ 0.89     $ 0.96     $ (2.03 )   $ 0.82  
                                         

Diluted earnings (loss) per share

  $ 0.46     $ 0.89     $ 0.96     $ (2.03 )   $ 0.81  
                                         

Cash dividends per common share

  $ 0.40     $ 0.40     $ 1.90     $ 2.90     $ 2.90  
                                         

Weighted average number of common shares outstanding:

                                       

Basic

    20,235       20,347       20,912       20,849       20,801  

Diluted

    20,239       20,352       20,986       20,849       20,823  
                                         

BALANCE SHEET INFORMATION

                                       
                                         

Working capital

  $ 255,007     $ 255,507     $ 283,535     $ 286,997     $ 303,996  

Total assets

    308,578       314,777       350,682       377,093       369,658  

Long-term debt

    68,500       72,000       84,000       94,000       52,000  

Shareholders' equity

    182,826       180,867       181,599       200,543       299,922  

 

 
24

 

 

ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS.

 

General:

 

Park Electrochemical Corp. (“Park” or the “Company”) is a global advanced materials company which develops, manufactures, markets and sells advanced composite materials, primary and secondary structures and assemblies and low-volume tooling for the aerospace markets and high-technology digital and RF/microwave printed circuit materials principally for the telecommunications and internet infrastructure, enterprise and military/aerospace markets. The Company’s manufacturing facilities are located in Kansas, Singapore, France, Arizona and California. The Company also maintains research and development facilities in Arizona, Kansas and Singapore.

 

The Company’s fiscal year is the 52 or 53 week period ending the Sunday nearest to the last day of February. The 2017, 2016 and 2015 fiscal years ended on February 26, 2017, February 28, 2016 and March 1, 2015, respectively. The 2017, 2016 and 2015 fiscal years consisted of 52 weeks. Unless otherwise indicated in this Discussion and Analysis, all references to years in this Discussion and Analysis are to the Company’s fiscal years and all annual information in this Discussion and Analysis is for such fiscal years.

 

2017 Financial Overview

 

The Company's total net sales worldwide in 2017 were 21% lower than in 2016 primarily due to lower sales of the Company’s printed circuit materials products in Asia and North America and lower sales of the Company’s aerospace composite materials, parts and assemblies and low-volume tooling. The lower sales in Asia were primarily due to a slowdown in demand for the Company’s products which are used by original equipment manufacturers (“OEMs”) in the manufacture of equipment for the internet and telecommunications infrastructure in developing countries and certain legacy materials coming to end-of-program life at OEMs.

 

The Company’s gross profit margin, measured as a percentage of sales, decreased to 26.2% in 2017 from 29.3% in 2016 due primarily to lower sales and production levels of the Company’s printed circuit materials products in Asia and North America in 2017 and lower sales of the Company’s aerospace products combined with the fixed nature of certain overhead costs, which were partially offset by an improvement in its printed circuit materials production processes in North America. The gross profit in 2017 also benefited from the growing percentage of sales of the Company’s more technically advanced high performance printed circuit materials products.

 

The Company’s earnings from operations and net earnings in 2017 were 52% and 49% lower, respectively, than in 2016, primarily as a result of the aforementioned decreases in sales and gross profit margin, partially offset by a 7% reduction in selling, general and administrative expenses. Selling, general and administrative expenses decreased primarily due to decreases in shipping expenses, salary expenses, incentive compensation, stock option expenses and professional fees, partially offset by unfavorable foreign exchange rates. Earnings from operations in 2017 included pre-tax restructuring charges of $0.3 million in connection with the closure in 2009 of the New England Laminates Co., Inc. facility located in Newburgh, New York. Earnings from operations in 2016 included pre-tax restructuring charges of $0.5 million related to the facility closure mentioned above and the closure in 2013 of the Nelco Technology (Zhuhai FTZ) Ltd. (“Nelco Zhuhai”) facility located in the Free Trade Zone in Zhuhai, China.

 

The global markets for the Company’s products continue to be very difficult to forecast, and it is not clear to the Company what the demand for the Company’s products will be in 2018 or beyond.

 

 
25 

 

 

Results of Operations:

 

Fiscal Year 2017 Compared to Fiscal Year 2016

 

 

   

Fiscal Year Ended

                 
   

February 26,

   

February 28,

                 

(Amounts in thousands, except per share amounts)

 

2017

   

2016

   

Increase / (Decrease)

 
                                 

Net sales

  $ 114,609     $ 145,855     $ (31,246 )     -21 %

Cost of sales

    84,568       103,103       (18,535 )     -18 %

Gross profit

    30,041       42,752       (12,711 )     -30 %

Selling, general and administrative expenses

    19,739       21,211       (1,472 )     -7 %

Restructuring charges

    313       535       (222 )     -41 %

Earnings from operations

    9,989       21,006       (11,017 )     -52 %

Interest expense

    1,432       1,657       (225 )     -14 %

Interest and other income

    1,704       1,149       555       48 %

Earnings before income taxes

    10,261       20,498       (10,237 )     -50 %

Income tax provision

    978       2,469       (1,491 )     -60 %

Net earnings

  $ 9,283     $ 18,029     $ (8,746 )     -49 %
                                 

Earnings per share:

                               

Basic earnings per share

  $ 0.46     $ 0.89     $ (0.43 )     -48 %
                                 

Diluted earnings per share

  $ 0.46     $ 0.89     $ (0.43 )     -48 %

 

Net Sales

 

The Company's total net sales worldwide in 2017 were 21% lower than in 2016 primarily due to lower sales of the Company’s printed circuit materials products in Asia and North America and lower sales of the Company’s aerospace composite materials, parts and assemblies and low-volume tooling. The lower sales in Asia were primarily due to a slowdown in demand for the Company’s products which are used by OEMs in the manufacture of equipment for the internet and telecommunications infrastructure in developing countries and certain legacy materials coming to end-of-program life at OEMs.

 

The Company’s total net sales of its printed circuit materials products were $82.5 million and $106.7 million in 2017 and 2016, respectively, or 72% and 73%, respectively, of the Company’s total net sales worldwide in such periods. The Company’s total net sales of its aerospace composite materials, parts and assemblies products were $32.1 million and $39.1 million in 2017 and 2016, respectively, or 28% and 27%, respectively, of the Company’s total net sales worldwide in such periods.

 

The Company's foreign sales were $53.7 million, or 47% of the Company's total net sales worldwide, during 2017 compared to $70.6 million of sales, or 48% of total net sales worldwide, during 2016. The decrease in 2017 was primarily due to the lower sales in Asia for reasons described above.

 

The Company’s sales in North America, Asia and Europe were 53%, 39% and 8%, respectively, of the Company’s total net sales worldwide in 2017 compared to 52%, 42% and 6%, respectively, in 2016. The Company’s sales in North America decreased 19%, while its sales in Asia decreased 27% and its sales in Europe decreased 4% in 2017 compared to 2016.

 

 
26

 

 

During both 2017 and 2016, 93% of the Company’s total net sales worldwide of printed circuit materials consisted of high performance printed circuit materials.

 

The Company’s high performance printed circuit materials (non-FR4 printed circuit materials) include high-speed, low-loss materials for digital and RF/microwave applications requiring lead-free compatibility and high bandwidth signal integrity, allylated polyphenylene ether (“APPE”), bismalimide triazine (“BT”) materials, polyimides for applications that demand extremely high thermal performance and reliability, cyanate esters, quartz reinforced materials, and polytetrafluoroethylene (“PTFE”) and modified epoxy materials for RF/microwave systems that operate at frequencies up to at least 79GHz.

 

Gross Profit

 

The Company’s gross profit margin, measured as a percentage of sales, decreased to 26.2% in 2017 from 29.3% in 2016 due primarily to lower sales and production levels of the Company’s printed circuit materials products in Asia and North America in 2017 and lower sales of the Company’s aerospace products combined with the fixed nature of certain overhead costs, which were partially offset by an improvement in its printed circuit materials production processes in North America. The gross profit in 2017 also benefited from the growing percentage of sales of the Company’s more technically advanced high performance printed circuit materials products.

 

Selling, General and Administrative Expenses

 

Selling, general and administrative expenses decreased by $1.5 million, or 7%, during 2017 compared to 2016. Such expenses measured as percentages of sales were 17.2% during 2017 compared to 14.5% during 2016. The decrease in such expenses in 2017 was primarily due to decreases in shipping expenses commensurate with the sales reduction in 2017, and lower salary expenses, incentive compensation, stock option expenses and professional fees, partially offset by unfavorable foreign exchange rates.

 

Selling, general and administrative expenses in 2017 included $1.2 million of stock option expenses compared to $1.5 million of such expenses in 2016.

 

Restructuring Charges

 

During 2017, the Company recorded pre-tax restructuring charges of $0.3 million in connection with the closure in 2009 of its facility located in Newburgh, New York, compared to pre-tax restructuring charges of $0.5 million in 2016 in connection with the aforementioned facility closure and the closure in 2013 of its facility located in Zhuhai, China.

 

Earnings from Operations

 

For the reasons set forth above, the Company’s earnings from operations were $10.0 million for 2017, including pre-tax charges of $0.3 million associated with the closure in 2009 of the facility in Newburgh, New York, compared to $21.0 million for 2016, including the pre-tax charges of $0.5 million associated with the closures in prior years of facilities in Zhuhai, China and Newburgh, New York.

 

 
27

 

 

 Interest Expense

 

Interest expense in 2017 was $1.4 million, compared to $1.7 million in 2016. The decrease in interest expense in 2017 was primarily due to lower average outstanding debt and the pre-tax deferred financing costs of $0.3 million related to the early termination of the PNC Bank credit agreement in 2016 that did not recur in 2017. As previously reported, the Company entered into a three-year revolving credit facility agreement with HSBC Bank USA in January 2016, which replaced the credit facility agreement that the Company entered into with PNC Bank in February 2014. See Note 10 of the Notes to Consolidated Financial Statements included elsewhere in this Report and “Liquidity and Capital Resources” elsewhere in this Item 7 for additional information.

 

Interest and Other Income

 

Interest and other income were $1.7 million and $1.1 million for 2017 and 2016, respectively. The 48% increase in 2017 was primarily the result of higher weighted average interest rates based on longer average maturities of marketable securities held by the Company in 2017 compared to last year's comparable period. During 2017 and 2016, the Company earned interest income principally from its investments, which were primarily in short-term instruments and money market funds.

 

Income Tax Provision

 

The Company’s effective income tax rate of 9.5% for 2017 was lower than the statutory U.S. Federal income tax rate because portions of the Company’s taxable income in 2017 were derived in foreign jurisdictions with lower effective income tax rates. The Company’s effective income tax rate was 12.0% for 2016.  See “Results of Operations – Fiscal Year 2016 Compared to Fiscal Year 2015 – Income Tax Provision” elsewhere in this Item 7.

 

Net Earnings

 

The Company’s net earnings for 2017 were $9.3 million, including pre-tax charges of $0.3 million related to the facility closure mentioned above, compared to $18.0 million for 2016, including the pre-tax charges of $0.8 million related to deferred financing costs and the facility closures described above. The net impact of the items described above was to reduce net earnings by $0.2 million in 2017 and to reduce net earnings by $0.6 million in 2016.

 

Basic and Diluted Earnings Per Share

 

Basic and diluted earnings per share for 2017 were $0.46, including the facility closure mentioned above, compared to basic and diluted earnings per share of $0.89 for 2016, including the deferred financing costs and the facility closures described above. The net impact of the items described above was to reduce basic and diluted earnings per share by $0.01 and $0.02 in 2017 and 2016, respectively.

 

 
28

 

 

Fiscal Year 2016 Compared to Fiscal Year 2015

  

   

Fiscal Year Ended

                 
                                 
                                 

(Amounts in thousands, except per share amounts)

 

February 28, 2016

   

March 1, 2015

   

Increase / (Decrease)

 
                                 

Net sales

  $ 145,855     $ 162,086     $ (16,231 )     -10 %

Cost of sales

    103,103       113,133       (10,030 )     -9 %

Gross profit

    42,752       48,953       (6,201 )     -13 %

Selling, general and administrative expenses

    21,211       24,373       (3,162 )     -13 %

Restructuring charges

    535       1,179       (644 )     -55 %

Earnings from operations

    21,006       23,401       (2,395 )     -10 %

Interest expense

    1,657       1,438       219       15 %

Interest and other income

    1,149       827       322       39 %

Earnings before income taxes

    20,498       22,790       (2,292 )     -10 %

Income tax provision

    2,469       2,747       (278 )     -10 %

Net (loss) earnings

  $ 18,029     $ 20,043     $ (2,014 )     -10 %
                                 

Earnings per share:

                               

Basic (loss) earnings per share

  $ 0.89     $ 0.96     $ (0.07 )     -7 %
                                 

Diluted (loss) earnings per share

  $ 0.89     $ 0.96     $ (0.07 )     -7 %

 

Net Sales

 

The Company’s total net sales worldwide in 2016 decreased 10% from 2015 primarily as a result of lower sales of the Company’s printed circuit materials products in Asia and North America, partially offset by higher sales of the Company’s aerospace composite materials, parts and assemblies products. The lower sales in Asia were primarily due to a slowdown in demand for the Company’s products which are used by OEMs in the manufacture of equipment for the internet and telecommunications infrastructure in developing countries. The Company’s higher sales in Asia in 2015 were the result of a spike in demand for the Company’s printed circuit materials products in Asia caused by internet and telecommunications infrastructure build-out programs in developing countries. In addition, the OEMs which manufacture equipment for these programs rapidly increased their inventory levels in excess of program demands.

 

The Company’s total net sales of its printed circuit materials products were $106.7 million and $126.4 million in 2016 and 2015, respectively, or 73% and 78%, respectively, of the Company’s total net sales worldwide in such periods. The Company’s total net sales of its aerospace composite materials, parts and assemblies products were $39.1 million and $35.6 million in 2016 and 2015, respectively, or 27% and 22%, respectively, of the Company’s total net sales worldwide in such periods.

 

The Company's foreign sales were $70.6 million, or 48% of the Company's total net sales worldwide, during 2016 compared to $86.7 million of sales, or 53% of total net sales worldwide, during 2015. The decrease in 2016 was primarily due to the lower sales in Asia for reasons described above.

 

The Company’s sales in North America, Asia and Europe were 52%, 42% and 6%, respectively, of the Company’s total net sales worldwide in 2016 compared to 46%, 47% and 7%, respectively, in 2015. The Company’s sales in North America remained relatively flat, while its sales in Asia decreased 19% and its sales in Europe decreased 12% in 2016 compared to 2015.

 

 
29

 

 

During 2016, 93% of the Company’s total net sales worldwide of printed circuit materials consisted of high performance printed circuit materials, compared to 92% during 2015.

 

The Company’s high performance printed circuit materials (non-FR4 printed circuit materials) include high-speed, low-loss materials for digital and RF/microwave applications requiring lead-free compatibility and high bandwidth signal integrity, bismalimide triazine (“BT”) materials, polyimides for applications that demand extremely high thermal performance and reliability, cyanate esters, quartz reinforced materials, and polytetrafluoroethylene (“PTFE”) and modified epoxy materials for RF/microwave systems that operate at frequencies up to at least 79GHz.

 

Gross Profit

 

The Company’s gross profit margin, measured as a percentage of sales, decreased to 29.3% in 2016 from 30.2% in 2015 due primarily to lower sales and production levels of the Company’s printed circuit materials products in Asia and North America in 2016 combined with the fixed nature of certain overhead costs, which were partially offset by higher sales of the Company’s aerospace products, an improvement in its printed circuit materials production processes in North America, cost reduction initiatives in the United States and lower utility rates. The gross profit in 2016 also benefited from the higher percentage of sales of higher margin, high performance printed circuit materials products than in 2015 and the growing percentage of sales of the Company’s more technically advanced high performance products.

 

Selling, General and Administrative Expenses

 

Selling, general and administrative expenses decreased by $3.2 million, or 13%, during 2016 compared to 2015. Such expenses measured as percentages of sales were 14.5% during 2016 compared to 15.0% during 2015. The decrease in such expenses in 2016 was primarily the result of cost reduction initiatives, lower shipping expenses commensurate with the sales reduction in 2016, a decrease in legal and professional fees, lower incentive compensation expenses and favorable foreign exchange rates.

 

During 2015, the Company recorded non-cash charges of $0.4 million related to the modification of previously issued employee stock options in connection with the $1.50 per share special cash dividend paid by the Company in February 2015 and additional fees incurred in connection with the 2014 fiscal year-end audit. Selling, general and administrative expenses in 2016 included $1.5 million of stock option expenses compared to $1.4 million of such expenses in 2015.

 

Restructuring Charges

 

During 2016, the Company recorded pre-tax restructuring charges of $0.5 million in connection with the closures in prior years of its facilities located in Zhuhai, China and Newburgh, New York, compared to pre-tax restructuring charges of $1.2 million in 2015 in connection with cost reduction initiatives in the United States and the aforementioned facility closures.

 

 
30

 

 

Earnings from Operations

 

For the reasons set forth above, the Company’s earnings from operations were $21.0 million for 2016, including pre-tax charges of $0.5 million associated with the closures in prior years of facilities in Zhuhai, China and Newburgh, New York, compared to $23.4 million for 2015, including the non-cash pre-tax charges of $0.2 million associated with the modification of previously issued employee stock options, pre-tax restructuring charges of $1.2 million related to cost reduction initiatives in the United States and the closures in prior years of facilities in Zhuhai, China and Newburgh, New York and a pre-tax charge of $0.2 million for additional fees incurred in connection with the 2014 fiscal year-end audit.

 

 Interest Expense

 

Interest expense in 2016 was $1.7 million, compared to $1.4 million in 2015. The increase in interest expense in 2016 was primarily due to pre-tax deferred financing costs of $0.3 million related to the early termination of the PNC Bank credit agreement. As previously reported, the Company entered into a three-year revolving credit facility agreement with HSBC Bank USA in January 2016, which replaced the credit facility agreement that the Company entered into with PNC Bank in February 2014. See Note 10 of the Notes to Consolidated Financial Statements included elsewhere in this Report and “Liquidity and Capital Resources” elsewhere in this Item 7 for additional information.

 

Interest and Other Income

 

Interest and other income were $1.1 million and $0.8 million for 2016 and 2015, respectively. The 39% increase in 2016 was primarily the result of higher weighted average interest rates based on larger average balances of marketable securities held by the Company in 2016 compared to last year's comparable period. During 2016 and 2015, the Company earned interest income principally from its investments, which were primarily in short-term instruments and money market funds.

 

Income Tax Provision

 

The Company’s effective income tax rate of 12.0% for 2016 was lower than the statutory U.S. Federal income tax rate because portions of the Company’s taxable income in 2016 were derived in foreign jurisdictions with lower effective income tax rates. The Company’s effective income tax rate was 12.1% for 2015.  See “Results of Operations – Fiscal Year 2015 Compared to Fiscal Year 2014 – Income Tax Provision” elsewhere in this Item 7.

 

Net Earnings

 

The Company’s net earnings for 2016 were $18.0 million, including pre-tax charges of $0.8 million related to the facility closures and deferred financing costs mentioned above, compared to $20.0 million for 2015, including the pre-tax charges of $1.6 million related to a modification of previously issued employee stock options, cost reduction initiatives in the United States and the facility closures and additional 2014 fiscal year-end audit fees described above. The net impact of the items described above was to reduce net earnings by $0.6 million in 2016 and to reduce net earnings by $1.0 million in 2015.

 

Basic and Diluted Earnings Per Share

 

Basic and diluted earnings per share for 2016 were $0.89, including the facility closures and deferred financing costs mentioned above, compared to basic and diluted earnings per share of $0.96 for 2015, including the additional non-cash charges related to the modification of previously issued employee stock options, cost reduction initiatives in the United States and the facility closures and the additional 2014 fiscal year-end audit fees described above. The net impact of the items described above was to reduce basic and diluted earnings per share by $0.02 and $0.04 in 2016 and 2015, respectively.

 

 
31

 

 

Liquidity and Capital Resources:

 

(Amounts in thousands)

 

February 26,

   

February 28,

   

Increase /

 
   

2017

   

2016

   

(Decrease)

 
                         

Cash and marketable securities

  $ 238,590     $ 237,425     $ 1,165  

Restricted cash

    10,000       10,000       -  

Working capital

    255,007       255,507       (500

 

 

 

   

Fiscal Year Ended

                 

(Amounts in thousands)

 

February 26,

   

February 28,

   

March 1,

   

Increase / (Decrease)

 
   

2017

   

2016

   

2015

   

2017 vs. 2016

   

2016 vs. 2015

 
                                         

Net cash provided by operating activities

  $ 13,167     $ 13,948     $ 29,011     $ (781 )   $ (15,063 )

Net cash provided by (used in) investing activities

    2,478       (8,017 )     5,481       10,495       (13,498 )

Net cash used in financing activities

    (11,093 )     (49,495 )     (25,948 )     38,402       (23,547 )

 

 

Cash, Marketable Securities and Restricted Cash

 

Of the $248.6 million of cash, restricted cash and marketable securities at February 26, 2017, approximately $237.7 million was owned by certain of the Company’s wholly owned foreign subsidiaries. The Company believes it has sufficient liquidity to fund its operating activities for the twelve months from the date of the filing of this Form 10-K Annual Report and for the foreseeable future thereafter.

 

The change in cash, restricted cash and marketable securities at February 26, 2017 compared to February 28, 2016 was the result of lower cash provided by operating activities and a number of additional factors. The significant changes in cash provided by operating activities were as follows:

 

 

accounts receivable decreased by 24% at February 26, 2017 compared to February 28, 2016 primarily due to the reductions in total net sales and production levels;

 

accounts payable decreased 32% at February 26, 2017 compared to February 28, 2016 primarily due to lower production levels in the 2017 fiscal year fourth quarter compared to the 2016 fiscal year fourth quarter and to the timing of payments to vendors and raw material purchases from suppliers;

 

accrued liabilities decreased 25% at February 26, 2017 compared to February 28, 2016 due to lower accruals for incentive compensation and profit sharing.

 

In addition, the Company paid $8.1 million and $8.2 million in cash dividends during 2017 and 2016, respectively. During 2017, the Company made $3.0 million of principal payments on its long-term debt.

 

 
32

 

 

Working Capital

 

Working capital at February 26, 2017 was flat compared to February 28, 2016. Increases in cash and cash equivalents and decreases in accounts payable and accrued liabilities were offset by decreases in marketable securities and accounts receivable.

 

The Company's current ratio (the ratio of current assets to current liabilities) was 19.1 to 1 at February 26, 2017 compared with 16.3 to 1 at February 28, 2016.

 

Cash Flows

 

During 2017, the Company's net earnings, before depreciation and amortization, stock-based compensation, amortization of bond premium and gain on sale of fixed assets, were $14.0 million. Such earnings reflected a decrease in deferred income taxes of $1.5 million and were increased by changes in operating assets and liabilities of $0.8 million, resulting in $13.2 million of cash provided by operating activities. During 2017, the Company expended $242,000 for the purchase of property, plant and equipment compared to $398,000 during 2016, and the Company paid $8.1 million and $8.2 million in cash dividends in 2017 and 2016, respectively.  In addition, during 2017, the Company made $3.0 million of principal payments on its long-term debt.

 

Long-Term Debt

 

At February 26, 2017 and February 28, 2016, the Company had $72.0 million and $75.0 million of bank debt, respectively. In the fourth quarter of 2014, the Company entered into a four-year amended and restated revolving credit facility agreement (the “Amended Credit Agreement”) with PNC Bank, National Association. As previously reported, the Company entered into a three-year revolving credit facility agreement with HSBC Bank USA in January 2016, which replaced the credit facility agreement that the Company entered into with PNC Bank in February 2014. For additional information, see Note 10 of the Notes to Consolidated Financial Statements included elsewhere in this Report.

 

Other Liquidity Factors

 

The Company believes its financial resources will be sufficient, for the twelve months from the date of the filing of this Form 10-K Annual Report and for the foreseeable future thereafter, to provide for continued investment in working capital and property, plant and equipment and for general corporate purposes. The Company’s financial resources are also available for purchases of the Company's common stock, appropriate acquisitions and other expansions of the Company's business.

 

The Company is not aware of any circumstances or events that are reasonably likely to occur that could materially affect its liquidity.

 

Contractual Obligations:

 

The Company's contractual obligations and other commercial commitments to make future payments under contracts, such as lease agreements, consist only of (i) operating lease commitments, commitments to purchase raw materials and commitments to purchase equipment, as described in Note 11 of the Notes to Consolidated Financial Statements included elsewhere in this Report, and (ii) the long-term debt described above. The Company has no other long-term debt, capital lease obligations, unconditional purchase obligations or other long-term obligations, standby letters of credit, guarantees, standby repurchase obligations or other commercial commitments or contingent commitments, other than two standby letters of credit in the total amount of $1.0 million to secure the Company's obligations under its workers’ compensation insurance program.

 

 
33

 

 

As of February 26, 2017 the Company’s significant contractual obligations, including payments due by fiscal year, were as follows:

 

Contractual Obligations

(Amounts in thousands)

 

Total

   

2018

    2019-2020     2021-2022    

2023 and

Thereafter

 
                                         

Operating lease obligations

  $ 9,683     $ 1,937     $ 3,403     $ 1,600     $ 2,743  

Bank debt

    72,000       3,500       68,500       -       -  

Total

  $ 81,683     $ 5,437     $ 71,903     $ 1,600     $ 2,743  

  

At February 26, 2017, the Company had unrecognized tax benefits of $1.0 million. A reasonable estimate of the timing of the payment of these liabilities is not possible.

 

Off-Balance Sheet Arrangements:

 

The Company's liquidity is not dependent on the use of, and the Company is not engaged in, any off-balance sheet financing arrangements, such as securitization of receivables or obtaining access to assets through special purpose entities.

 

Environmental Matters:

 

The Company is subject to various Federal, state and local government and foreign government requirements relating to the protection of the environment. The Company believes that, as a general matter, its policies, practices and procedures are properly designed to prevent unreasonable risk of environmental damage and that its handling, manufacture, use and disposal of hazardous or toxic substances are in accord with environmental laws and regulations. However, mainly because of past operations and operations of predecessor companies, which were generally in compliance with applicable laws at the time of the operations in question, the Company, like other companies engaged in similar businesses, is a party to claims by government agencies and third parties and has incurred remedial response and voluntary cleanup costs associated with environmental matters. Additional claims and costs involving past environmental matters may continue to arise in the future. It is the Company's policy to record appropriate liabilities for such matters when remedial efforts are probable and the costs can be reasonably estimated.

 

In 2017, 2016 and 2015, the Company incurred approximately $84,000, $113,000 and $44,000, respectively, for remedial response and voluntary cleanup costs and related legal fees, and the Company received, or expects to receive, reimbursement pursuant to general liability insurance coverage for approximately $84,000, $111,000 and $21,000, respectively, of such amounts. While annual environmental remedial response and voluntary cleanup expenditures, including legal fees, have generally been constant from year to year, and may increase over time, the Company expects it will be able to fund such expenditures from cash flow from operations. The timing of expenditures depends on a number of factors, including regulatory approval of cleanup projects, remedial techniques to be utilized and agreements with other parties. At February 26, 2017 and February 28, 2016, there were no amounts recorded in accrued liabilities for environmental matters.

 

 
34

 

 

Management does not expect that environmental matters will have a material adverse effect on the liquidity, capital resources, business, consolidated results of operations or consolidated financial position of the Company. See Note 12 of the Notes to Consolidated Financial Statements included in Item 8 of Part II of this Report for a discussion of the Company's contingencies, including those related to environmental matters.

 

Critical Accounting Policies and Estimates:

 

The following information is provided regarding critical accounting policies that are important to the Consolidated Financial Statements and that entail, to a significant extent, the use of estimates, assumptions and the application of management's judgment.

 

General

 

The Company's discussion and analysis of its financial condition and results of operations are based upon the Company's Consolidated Financial Statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these Financial Statements requires the Company to make estimates, assumptions and judgments that affect the reported amounts of assets, liabilities, revenues and expenses and the related disclosure of contingent liabilities. On an ongoing basis, the Company evaluates its estimates, including those related to sales allowances, allowances for doubtful accounts, inventories, valuation of long-lived assets, income taxes, restructurings, contingencies and litigation, and employee benefit programs. The Company bases its estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

 

The Company believes the following critical accounting policies affect its more significant judgments and estimates used in the preparation of its Consolidated Financial Statements.

 

Recently Adopted Accounting Pronouncement

 

In November 2015, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes, as part of the FASB’s Simplification Initiative to identify, evaluate, and improve areas of US GAAP for which cost and complexity can be reduced while maintaining or improving the usefulness of the information provided to users. The ASU simplifies the presentation of deferred income taxes under US GAAP by requiring that all deferred tax assets and liabilities be classified as non-current. For public companies, the ASU is effective for financial statements issued for fiscal years beginning after December 15, 2016 and interim reporting periods within those fiscal years. Earlier application is permitted for all entities as of the beginning of an interim or annual reporting period. The Company elected to early adopt this guidance retrospectively in the fourth quarter of the Company’s 2016 fiscal year, and the early adoption of this guidance did not impact the Company’s results of operations, cash flows or financial condition.

 

Revenue Recognition

 

The Company recognizes revenues when products are shipped and title has been transferred to a customer, the sales price is fixed and determinable, and collection is reasonably assured. All material sales transactions are for the shipment of the Company’s products.

 

Sales Allowances and Product Warranties

 

The Company provides for the estimated costs of sales allowances at the time such costs can be reasonably estimated. The Company’s products are made to customer specifications and tested for adherence to such specifications before shipment to customers. Composite parts and assemblies may be subject to “airworthiness” acceptance by customers after receipt at the customers’ locations. There are no future performance requirements other than the products’ meeting the agreed specifications. The Company’s bases for providing sales allowances for returns are known situations in which products may have failed due to manufacturing defects in the products supplied by the Company. The Company is focused on manufacturing the highest quality printed circuit materials and advanced composite materials, parts and assemblies and tooling possible and employs stringent manufacturing process controls and works with raw material suppliers who have dedicated themselves to complying with the Company’s specifications and technical requirements. The amounts of returns and allowances resulting from defective or damaged products have been approximately 1.0% of sales for each of the Company’s last three fiscal years.

 

 
35

 

 

Accounts Receivable

 

The Company’s accounts receivable are due from purchasers of the Company’s products. Credit is extended based on evaluation of a customer’s financial condition and, generally, collateral is not required. Accounts receivable are due within established payment terms and are stated at amounts due from customers net of an allowance for doubtful accounts. Accounts outstanding longer than established payment terms are considered past due. The Company determines its allowance by considering a number of factors, including the length of time accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the conditions of the general economy and the electronics and aerospace industries. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company writes off accounts receivable when they become uncollectible.

 

Inventories

 

Inventories are stated at the lower of cost (first-in, first-out method) or market. The Company writes down its inventory for estimated obsolescence or unmarketability based upon the age of the inventory and assumptions about future demand for the Company's products and market conditions.

 

Valuation of Long-Lived Assets

 

The Company assesses the impairment of long-lived assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. In addition, the Company assesses the impairment of goodwill at least annually. Important factors that could trigger an impairment review include, but are not limited to, significant negative industry or economic trends and significant changes in the use of the Company’s assets or strategy of the overall business.

 

Income Taxes

 

As part of the processes of preparing its consolidated financial statements, the Company is required to estimate the income taxes in each of the jurisdictions in which it operates. This process involves estimating the actual current tax expense together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included in the Company’s Consolidated Balance Sheets. Deferred income taxes are provided for temporary differences in the reporting of certain items, such as depreciation and undistributed earnings of foreign subsidiaries, for income tax purposes compared to financial accounting purposes. In evaluating the Company’s ability to recover the deferred tax assets within the jurisdiction from which they arise, all positive and negative evidence is considered, including the scheduled reversal of deferred tax liabilities, projected future taxable income, tax planning strategies and results of recent acquisitions. If these estimates and assumptions change in the future, the Company may be required to record additional valuation allowances against its deferred tax assets, resulting in additional income tax expense in the Company's Consolidated Statements of Operations, or conversely to further reduce the existing valuation allowance, resulting in less income tax expense. The Company evaluates the realizability of the deferred tax assets and assesses the need for additional valuation allowances quarterly.

 

 
36

 

 

Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-than-not recognition threshold, the tax benefit is measured as the largest amount that is judged to have a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority. The liability associated with unrecognized tax benefits is adjusted periodically due to changing circumstances and when new information becomes available. Such adjustments are recognized entirely in the period in which they are identified. The effective tax rate includes the net impact of changes in the liability for unrecognized tax benefits and subsequent adjustments as considered appropriate by the Company. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its liability for unrecognized tax benefits is adequate. Interest and penalties recognized on the liability for unrecognized tax benefits are recorded as income tax expense.

 

Contingencies and Litigation

 

The Company is subject to a number of proceedings, lawsuits and other claims related to environmental, employment, product and other matters. The Company is required to assess the likelihood of any adverse judgments or outcomes in these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may change in the future due to new developments in each matter or changes in approach, such as a change in settlement strategy in dealing with these matters.

 

Employee Benefit Programs

 

The Company's obligations for workers' compensation claims are effectively self-insured, although the Company maintains individual and aggregate stop-loss insurance coverage for such claims. The Company accrues its workers’ compensation liability based on estimates of the total exposure of known claims using historical experience and projected loss development factors less amounts previously paid out.

 

The Company and certain of its subsidiaries have a non-contributory profit sharing retirement plan covering their regular full-time employees. In addition, the Company's subsidiaries have various bonus and incentive compensation programs, most of which are determined at management's discretion.

 

The Company's reserves associated with these self-insured liabilities and benefit programs are reviewed by management for adequacy at the end of each reporting period.

 

FACTORS THAT MAY AFFECT FUTURE RESULTS.

 

The Private Securities Litigation Reform Act of 1995 provides a "safe harbor" for forward-looking statements to encourage companies to provide prospective information about their companies without fear of litigation so long as those statements are identified as forward-looking and are accompanied by meaningful cautionary statements identifying important factors that could cause actual results to differ materially from those projected in the statement. Certain portions of this Report which do not relate to historical financial information may be deemed to constitute forward-looking statements that are subject to various factors which could cause actual results to differ materially from Park's expectations or from results which might be projected, forecasted, estimated or budgeted by the Company in forward-looking statements.

 

 
37

 

 

Generally, forward-looking statements can be identified by the use of words such as “expect,” “estimate,” “project,” “budget,” “forecast,” “anticipate,” “goal,” “intend,” “plan,” “may,” “will,” “could,” “should,” “believes,” “predicts,” “potential,” “continue” and similar expressions or the negative or other variations thereof. Such forward-looking statements are based on current expectations that involve a number of uncertainties and risks that may cause actual events or results to differ materially from Park’s expectations.

 

The factors described under “Risk Factors” in Item 1A of this Report, as well as the following additional factors, could cause the Company's actual results to differ materially from any such results which might be projected, forecasted, estimated or budgeted by the Company in forward-looking statements.

 

 

The Company's operating results are affected by a number of factors, including various factors beyond the Company's control. Such factors include economic conditions in the printed circuit materials, advanced composite materials and composite parts and assemblies industries, the timing of customer orders, product prices, process yields, the mix of products sold and maintenance-related shutdowns of facilities. Operating results also can be influenced by development and introduction of new products and the costs associated with the start-up of new facilities.

 

 

The Company, from time to time, is engaged in the expansion of certain of its manufacturing facilities. The anticipated costs of such expansions cannot be determined with precision and may vary materially from those budgeted. In addition, such expansions will increase the Company's fixed costs. The Company's future profitability depends upon its ability to utilize its manufacturing capacity in an effective manner.

 

 

The Company may acquire businesses, product lines or technologies that expand or complement those of the Company. The integration and management of an acquired company or business may strain the Company's management resources and technical, financial and operating systems. In addition, implementation of acquisitions can result in large one-time charges and costs. A given acquisition, if consummated, may materially affect the Company's business, financial condition and results of operations.

 

 

The Company's success is dependent upon its relationships with key suppliers and customers and key management and technical personnel.

 

 

The Company's future success depends in part upon its intellectual property which the Company seeks to protect through a combination of contract provisions, trade secret protections, copyrights and patents.

 

 

The market price of the Company’s securities can be subject to fluctuations in response to quarter to quarter variations in operating results, changes in analyst earnings estimates, market conditions in the printed circuit materials, advanced composite materials and composite parts and assemblies industries, as well as general economic conditions and other factors external to the Company.

 

 

The Company's operating results could be affected by changes in the Company's accounting policies and practices or changes in the Company's organization, compensation and benefit plans, or changes in the Company's material agreements or understandings with third parties.

 

 
38

 

 

Item 7A.

Quantitative and Qualitative Disclosures About Market Risk.

 

Foreign Exchange Risk - The Company's primary foreign currency exchange exposure relates to the translation of the financial statements of foreign subsidiaries using currencies other than the U.S. dollar as their functional currencies. The Company does not believe that a hypothetical 10% fluctuation in foreign exchange rates would have had a material impact on its consolidated results of operations or financial position.

 

Interest Rate Risk - The exposure to market risks for changes in interest rates relates to the Company's short-term investment portfolio and its variable rate borrowings under its long-term debt obligations pursuant to the three-year revolving credit facility agreement (“Credit Agreement”) with HSBC Bank USA, National Association. See Note 10 of the Notes to Consolidated Financial Statements in Item 8 of Part II of this Report. The Company does not use derivative financial instruments in its investment portfolio or its long-term debt obligations. The Company’s short-term investment portfolio is managed in accordance with guidelines issued by the Company. These guidelines are designed to establish a high quality fixed income portfolio of government and highly rated corporate debt securities with a maximum weighted maturity of less than one year. Based on the average anticipated maturity of the investment portfolio at the end of the 2017 fiscal year, the Company does not believe that a hypothetical 10% fluctuation in short-term interest rates would have had a material impact on the consolidated results of operations or financial position of the Company. The Company’s outstanding borrowings of $72.0 million, at February 26, 2017, represent 100% of the Company’s total long-term debt obligations. Outstanding borrowings bear interest at a rate equal to, at the Company’s option, either (a) a fluctuating rate per annum (computed on the basis of a year of 365 or 366 days, as the case may be, and actual days elapsed) equal to the Base Rate (as defined in the Credit Agreement), such interest rate to change automatically from time to time effective as of the effective date of each change in the Base Rate or (b) a rate per annum (computed on the basis of a year of 360 days and actual days elapsed) equal to the one, two, three or six month LIBOR Rate (as defined in the Credit Agreement) plus 1.15%. The Company does not believe that a hypothetical 10% fluctuation in interest rates would have had a material impact on the consolidated results of operations or financial position of the Company.

 

 
39

 

 

Item 8.

Financial Statements and Supplementary Data.

 

The Company's Financial Statements begin on the next page.

 

 
40

 

  

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

The Board of Directors and Shareholders

Park Electrochemical Corp.

 

We have audited the accompanying consolidated balance sheets of Park Electrochemical Corp. and subsidiaries as of February 26, 2017 and February 28, 2016, and the related consolidated statements of operations, comprehensive earnings, shareholders’ equity and cash flows for each of the three years in the period ended February 26, 2017. Our audits also included the financial statement schedule listed in the index at Item 15. Park Electrochemical Corp.’s management is responsible for these consolidated financial statements and financial statement schedule. Our responsibility is to express an opinion on these consolidated financial statements and financial statement schedule based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Park Electrochemical Corp. and subsidiaries as of February 26, 2017 and February 28, 2016, and the results of their operations and their cash flows for each of the three years in the period ended February 26, 2017, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly in all material respects, the information set forth therein.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Park Electrochemical Corp. and subsidiaries’ internal control over financial reporting as of February 26, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated May 12, 2017 expressed an unqualified opinion thereon.

 

/s/ CohnReznick LLP

 

Jericho, New York

May 12, 2017

 

 
41

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(Amounts in thousands, except share and per share amounts)


  

   

February 26, 2017

   

February 28, 2016

 

ASSETS

               

Current assets:

               

Cash and cash equivalents

  $ 102,438     $ 97,757  

Marketable securities (Note 2)

    136,152       139,668  

Accounts receivable, less allowance for doubtful accounts of $294 and $324, respectively

    17,238       22,583  

Inventories (Note 3)

    11,105       10,214  

Prepaid expenses and other current assets (Note 4)

    2,197       1,963  

Total current assets

    269,130       272,185  
                 

Property, plant and equipment, net

    18,638       21,512  

Goodwill and other intangible assets (Note 3)

    9,825       9,833  

Restricted cash

    10,000       10,000  

Other assets (Note 4)

    985       1,247  

Total assets

  $ 308,578     $ 314,777  
                 

LIABILITIES AND SHAREHOLDERS' EQUITY

               

Current liabilities:

               

Current portion of long-term debt (Note 10)

  $ 3,500     $ 3,000  

Accounts payable

    4,183       6,155  

Accrued liabilities (Note 3)

    3,417       4,580  

Income taxes payable

    3,023       2,943  

Total current liabilities

    14,123       16,678  
                 

Long-term debt (Note 10)

    68,500       72,000  

Deferred income taxes (Note 4)

    42,088       43,937  

Other liabilities (Note 4)

    1,041       1,295  

Total liabilities

    125,752       133,910  
                 

Commitments and contingencies (Notes 11 and 12)

               
                 

Shareholders' equity (Note 6):

               

Preferred stock, $1 par value per shares-authorized, 500,000 shares; issued, none

    -       -  
                 

Common stock, $0.10 par value per shares-authorized, 60,000,000 shares; issued, 20,965,144 shares

    2,096       2,096  

Additional paid-in capital

    167,612       166,398  

Retained earnings

    27,112       25,922  

Accumulated other comprehensive earnings

    1,026       1,471  
      197,846       195,887  
                 

Less treasury stock, at cost, 730,473 shares

    (15,020 )     (15,020 )

Total shareholders' equity

    182,826       180,867  

Total liabilities and shareholders' equity

  $ 308,578     $ 314,777  

 

See Notes to Consolidated Financial Statements.

 

 
42

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS

(Amounts in thousands, except per share amounts)


 

   

Fiscal Year Ended

 
   

February 26,

   

February 28,

   

March 1,

 
   

2017

   

2016

   

2015

 
                         

Net sales

  $ 114,609     $ 145,855     $ 162,086  

Cost of sales

    84,568       103,103       113,133  

Gross profit

    30,041       42,752       48,953  

Selling, general and administrative expenses

    19,739       21,211       24,373  

Restructuring charges (Note 8)

    313       535       1,179  

Earnings from operations

    9,989       21,006       23,401  

Interest expense (Note 10)

    1,432       1,657       1,438  

Interest and other income

    1,704       1,149       827  

Earnings before income taxes

    10,261       20,498       22,790  

Income tax provision (Note 4)

    978       2,469       2,747  

Net earnings

  $ 9,283     $ 18,029     $ 20,043  
                         

Earnings per share (Note 7):

                       

Basic earnings per share

  $ 0.46     $ 0.89     $ 0.96  

Basic weighted average shares

    20,235       20,347       20,912  
                         

Diluted earnings per share

  $ 0.46     $ 0.89     $ 0.96  

Diluted weighted average shares

    20,239       20,352       20,986  

 

See Notes to Consolidated Financial Statements.

 

 
43

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF COMPREHENSIVE EARNINGS

(Amounts in thousands)


  

   

Fiscal Year Ended

 
   

February 26,

   

February 28,

   

March 1,

 
   

2017

   

2016

   

2015

 
                         

Net earnings

  $ 9,283     $ 18,029     $ 20,043  

Other comprehensive earnings, net of tax:

                       

Foreign currency translation

    30       62       185  

Unrealized gains on marketable securities:

                       

Unrealized holding gains arising during the period

    76       52       90  

Less: reclassification adjustment for gains included in net earnings

    (228 )     (18 )     (21 )

Unrealized losses on marketable securities:

                       

Unrealized holding losses arising during the period

    (411 )     (156 )     (20 )

Less: reclassification adjustment for losses included in net earnings

    88       63       13  

Other comprehensive (loss) earnings

    (445 )     3       247  

Total comprehensive earnings

  $ 8,838     $ 18,032     $ 20,290  

 

See Notes to Consolidated Financial Statements.

 

 
44

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY

(Amounts in thousands, except share and per share amounts)


 

 

                                   

Accumulated

                 
                   

Additional

           

Other

                 
   

Common Stock

   

Paid-in

   

Retained

   

Comprehensive

   

Treasury Stock

 
   

Shares

   

Amount

   

Capital

   

Earnings

   

Earnings

   

Shares

   

Amount

 
                                                         

Balance, March 2, 2014

    20,882,844     $ 2,088     $ 161,677     $ 35,651     $ 1,221       4,074     $ (94 )

Net earnings

    -       -       -       20,043       -       -       -  

Foreign currency translation

    -       -       -       -       185       -       -  

Unrealized gain on marketable securities, net of tax

    -       -       -       -       62       -       -  

Stock options exercised

    79,800       8       1,724       -       -       -       -  

Stock-based compensation

    -       -       1,418       -       -       -       -  

Repurchase of treasury shares

    -       -       -       -       -       126,567       (2,738 )

Cash dividends ($1.90 per share)

    -       -       -       (39,646 )     -       -       -  

Balance, March 1, 2015

    20,962,644     $ 2,096     $ 164,819     $ 16,048     $ 1,468       130,641     $ (2,832 )

Net earnings

    -       -       -       18,029       -       -       -  

Foreign currency translation

    -       -       -       -       62       -       -  

Unrealized loss on marketable securities, net of tax

    -       -       -       -       (59 )     -       -  

Stock options exercised

    2,500       -       44       -       -       -       -  

Stock-based compensation

    -       -       1,535       -       -       -       -  

Repurchase of treasury shares

    -       -       -       -       -       599,832       (12,188 )

Cash dividends ($.40 per share)

    -       -       -       (8,155 )     -       -       -  

Balance, February 28, 2016

    20,965,144     $ 2,096     $ 166,398     $ 25,922     $ 1,471       730,473     $ (15,020 )

Net earnings

    -       -       -       9,283       -       -       -  

Foreign currency translation

    -       -       -       -       30       -       -  

Unrealized loss on marketable securities, net of tax

    -       -       -       -       (475 )     -       -  

Stock-based compensation

    -       -       1,214       -       -       -       -  

Cash dividends ($.40 per share)

    -       -       -       (8,093 )     -       -       -  

Balance, February 26, 2017

    20,965,144     $ 2,096     $ 167,612     $ 27,112     $ 1,026       730,473     $ (15,020 )

 

See Notes to Consolidated Financial Statements.

 

 
45

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(Amounts in thousands)


                                       

   

Fiscal Year Ended

 
   

February 26,

   

February 28,

   

March 1,

 
   

2017

   

2016

   

2015

 

Cash flows from operating activities:

                       

Net earnings

  $ 9,283     $ 18,029     $ 20,043  

Adjustments to reconcile net earnings to net cash provided by operating activities:

                       

Depreciation and amortization

    3,106       3,369       3,559  

Stock-based compensation

    1,214       1,535       1,418  

Provision for deferred income taxes

    (1,533 )     (11,412 )     (2,815 )

Amortization of bond premium

    434       886       796  

Gain on sale of fixed assets

    -       (31 )     -  

Changes in operating assets and liabilities:

                       

Accounts receivable

    5,312       (1,152 )     1,138  

Inventories

    (916 )     4,225       (664 )

Prepaid expenses and other current assets

    (422 )     (131 )     1,713  

Other assets and liabilities

    (229 )     620       1,490  

Accounts payable

    (1,964 )     (727 )     322  

Accrued liabilities

    (1,198 )     (65 )     866  

Income taxes payable

    80       (1,198 )     1,145  

Net cash provided by operating activities

    13,167       13,948       29,011  
                         

Cash flows from investing activities:

                       

Purchase of property, plant and equipment

    (242 )     (398 )     (430 )

Proceeds from sales of property, plant and equipment

    -       2,057       -  

Purchases of marketable securities

    (72,827 )     (105,998 )     (100,074 )

Proceeds from sales and maturities of marketable securities

    75,547       96,322       105,985  

Net cash provided by (used in) investing activities

    2,478       (8,017 )     5,481  
                         

Cash flows from financing activities:

                       

Dividends paid

    (8,093 )     (8,155 )     (39,646 )

Decrease (increase) in restricted cash

    -       (10,000 )     25,000  

Proceeds from exercise of stock options

    -       44       1,732  

Proceeds from long-term debt

    -       75,000       -  

Payments of long-term debt

    (3,000 )     (94,000 )     (10,000 )

Payments for debt issuance costs

    -       (196 )     (296 )

Purchase of treasury stock

    -       (12,188 )     (2,738 )

Net cash used in financing activities

    (11,093 )     (49,495 )     (25,948 )
                         

Increase (decrease) in cash and cash equivalents before effect of exchange rate changes

    4,552       (43,564 )     8,544  

Effect of exchange rate changes on cash and cash equivalents

    129       (217 )     (156 )

Increase (decrease) in cash and cash equivalents

    4,681       (43,781 )     8,388  

Cash and cash equivalents, beginning of year

    97,757       141,538       133,150  

Cash and cash equivalents, end of year

  $ 102,438     $ 97,757     $ 141,538  

 

See Notes to Consolidated Financial Statements.

 

 
46

 

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Three years ended February 26, 2017

(Amounts in thousands, except share (unless otherwise stated), per share and option amounts)


 

1.

Summary of Significant Accounting Policies

 

Park Electrochemical Corp. (“Park”), through its subsidiaries (collectively, the “Company”), is a global advanced materials company which develops and manufactures advanced composite materials, primary and secondary structures and assemblies and low-volume tooling for the aerospace markets and high-technology digital and RF/microwave printed circuit materials principally for the telecommunications and internet infrastructure, enterprise and military markets.

 

 

a.

Principles of Consolidation – The consolidated financial statements include the accounts of Park and its subsidiaries. All significant intercompany balances and transactions have been eliminated.

 

 

b.

Use of Estimates – The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“US GAAP”) requires management to make estimates and assumptions that affect the amounts reported in the consolidated financial statements and accompanying notes. Actual results may differ from those estimates.

  

 

c.

Accounting Period – The Company’s fiscal year is the 52 or 53 week period ending the Sunday nearest to the last day of February. The 2017, 2016 and 2015 fiscal years ended on February 26, 2017, February 28, 2016 and March 1, 2015, respectively. Fiscal years 2017, 2016 and 2015 all consisted of 52 weeks.

 
 

d.

Fair Value Measurements – Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability (i.e., the “exit price”) in an orderly transaction between market participants at the measurement date.

 

Fair value measurements are broken down into three levels based on the reliability of inputs as follows:

 

Level 1 inputs are quoted prices in active markets for identical assets or liabilities that the Company has the ability to access at the measurement date. An active market for the asset or liability is a market in which transactions for the asset or liability occur with sufficient frequency and volume to provide pricing information on an ongoing basis.

 

Level 2 inputs are inputs other than quoted prices included within Level 1 that are observable for the asset or liability, either directly or indirectly. Level 2 inputs include quoted prices for similar assets or liabilities in active markets, inputs other than quoted prices that are observable for the asset or liability (e.g., interest rates and yield curves observable at commonly quoted intervals or current market) and contractual prices for the underlying financial instrument, as well as other relevant economic measures.

 

Level 3 inputs are unobservable inputs for the asset or liability. Unobservable inputs are used to measure fair value to the extent that observable inputs are not available, thereby allowing for situations in which there is little, if any, market activity for the asset or liability at the measurement date.

 

 
47

 

 

The fair value of the Company’s cash and cash equivalents, accounts receivable, accounts payable and current liabilities approximate their carrying value due to their short-term nature. Due to the variable interest rates periodically adjusting with the current LIBOR, the carrying value of outstanding borrowings under the Company’s long-term debt approximates its fair value. (See Note 10). Certain assets and liabilities of the Company are required to be recorded at fair value on either a recurring or non-recurring basis. On a recurring basis, the Company records its marketable securities at fair value using Level 1 or Level 2 inputs. (See Note 2).

 

The Company’s non-financial assets measured at fair value on a non-recurring basis include goodwill and any long-lived assets written down to fair value. To measure fair value of such assets, the Company uses Level 3 inputs consisting of techniques including an income approach and a market approach. The income approach is based on a discounted cash flow analysis and calculates the fair value by estimating the after-tax cash flows attributable to a reporting unit and then discounting the after-tax cash flows to a present value using a risk-adjusted discount rate. Assumptions used in the discounted cash flow analysis require the exercise of significant judgment, including judgment about appropriate discount rates, terminal values, growth rates and the amount and timing of expected future cash flows. There were no transfers between levels within the fair value hierarchy during the 2017 and 2016 fiscal years.

 

 

e.

Cash and Cash Equivalents The Company considers all money market securities and investments with contractual maturities at the date of purchase of 90 days or less to be cash equivalents. The Company had $29,942 and $39,968 in debt securities included in cash equivalents at February 26, 2017 and February 28, 2016, respectively, which were valued based on Level 2 inputs. Certain of the Company’s cash and cash equivalents are in excess of U.S. government insurance. $237,743 of the $248,590 of cash and marketable securities and restricted cash at February 26, 2017 was owned by certain of the Company’s wholly owned foreign subsidiaries.

 

The Company classifies amounts required by the Credit Agreement described in Note 10 to be maintained in cash and marketable securities as restricted cash on the consolidated balance sheets.

 

Supplemental cash flow information:

 

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

Cash paid during the year for:

                       

Income taxes, net of refunds

  $ 3,648     $ 14,728     $ 1,707  

Interest

    1,342       1,119       1,380  

 

 
48

 

 

At February 26, 2017 and February 28, 2016, the Company held $22,218 and $28,878, respectively, of cash and cash equivalents in foreign financial institutions.

 

 

f.

Marketable Securities – All marketable securities are classified as available-for-sale and are carried at fair value, with the unrealized gains and losses, net of tax, included in comprehensive earnings (loss). Realized gains and losses, amortization of premiums and discounts, and interest and dividend income are included in interest and other income, net. The cost of securities sold is based on the specific identification method.

 

 

g.

Inventories – Inventories are stated at the lower of cost (first-in, first-out method) or market. The Company writes down its inventory for estimated obsolescence or unmarketability based upon the age of the inventory and assumptions about future demand for the Company's products and market conditions.

 

 

h.

Revenue Recognition – The Company recognizes revenues when products are shipped and title has been transferred to a customer, the sales price is fixed and determinable, and collection is reasonably assured. All material sales transactions are for the shipment of the Company’s products.

 

 

i.

Sales Allowances and Product Warranties – The Company provides for the estimated costs of sales allowances at the time such costs can be reasonably estimated. The Company’s products are made to customer specifications and tested for adherence to specifications before shipment to customers. Composite parts and assemblies may be subject to “airworthiness” acceptance by customers after receipt at the customers’ locations. There are no future performance requirements other than the products’ meeting the agreed specifications. The Company’s bases for providing sales allowances for returns are known situations in which products may have failed due to manufacturing defects in products supplied by the Company. The Company is focused on manufacturing the highest quality products and employs stringent manufacturing process controls and works with raw material suppliers who have dedicated themselves to complying with the Company's specifications and technical requirements. The amounts of returns and allowances resulting from defective or damaged products have been less than 1.0% of sales for each of the Company's last three fiscal years.

 

 

j.

Accounts Receivable – The Company’s accounts receivable are due from purchasers of the Company’s products. Credit is extended based on evaluation of a customer’s financial condition and, generally, collateral is not required. Accounts receivable are due within established payment terms and are stated at amounts due from customers net of an allowance for doubtful accounts. Accounts outstanding longer than established payment terms are considered past due. The Company determines its allowance by considering a number of factors, including the length of time accounts receivable are past due, the Company’s previous loss history, the customer’s current ability to pay its obligation to the Company, and the conditions of the general economy and the electronics and aerospace industries. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company writes off accounts receivable when they become uncollectible.

 

 
49

 

 

 

k.

Valuation of Long-Lived Assets – The Company assesses the impairment of long-lived assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. Important factors that could trigger an impairment review include, but are not limited to, significant negative industry or economic trends and significant changes in the use of the Company's assets or strategy of the overall business. No impairments of long-lived assets were identified in the 2017, 2016 or 2015 fiscal years.

 

 

l.

Goodwill and Other Intangible Assets – Goodwill is not amortized. Other intangible assets are amortized over the useful lives, which is 15 years, of the assets on a straight-line basis. The Company tests for impairment of intangible assets whenever events or changes in circumstances indicate that the carrying value of such assets may not be recoverable. With respect to goodwill, the Company first assesses qualitative factors to determine whether it is more likely than not that the fair value is less than the carrying value. If, based on that assessment, the Company believes it is more likely than not that the fair value is less than the carrying value, a two-step goodwill impairment test is performed. The Company assesses the impairment of goodwill at least annually. The Company conducts its annual goodwill impairment test as of the first day of the fourth quarter. The Company concluded that there was no impairment in the 2017, 2016 or 2015 fiscal years.

 

 

m.

Shipping Costs – The amounts paid by the Company to third-party shippers for transporting products to customers, which are not reimbursed by customers, are classified as selling expenses. The shipping costs included in selling, general and administrative expenses were approximately $2,354, $2,855 and $3,398 for the 2017, 2016 and 2015 fiscal years, respectively.

 

 

n.

Property, Plant and Equipment – Property, plant and equipment are stated at cost less accumulated depreciation and amortization. The Company capitalizes additions, improvements and major renewals and expenses maintenance, repairs and minor renewals as incurred. Depreciation and amortization are computed principally by the straight-line method over the estimated useful lives of the assets. Machinery, equipment, furniture and fixtures are generally depreciated over 10 years. Building and leasehold improvements are generally depreciated over 25-30 years or the term of the lease, if shorter. The depreciation and amortization expenses associated with property, plant and equipment were $3,106, $3,369 and $3,559 for the 2017, 2016 and 2015 fiscal years, respectively.

 

 

o.

Income Taxes – Deferred income taxes are provided for temporary differences in the reporting of certain items, such as depreciation and undistributed earnings of foreign subsidiaries, for income tax purposes compared to financial accounting purposes. In evaluating the Company’s ability to recover the deferred tax assets within the jurisdiction from which they arise, all positive and negative evidence is considered, including the scheduled reversal of deferred tax liabilities, projected future taxable income, tax planning strategies and results of recent acquisitions. If these estimates and assumptions change in the future, the Company may be required to record additional valuation allowances against its deferred tax assets, resulting in additional income tax expense in the Company's Consolidated Statements of Operations, or conversely to further reduce the existing valuation allowance, resulting in less income tax expense. The Company evaluates the realizability of the deferred tax assets and assesses the need for additional valuation allowances quarterly.

 

 
50

 

 

Tax benefits are recognized for an uncertain tax position when, in the Company’s judgment, it is more likely than not that the position will be sustained upon examination by a taxing authority. For a tax position that meets the more-likely-than-not recognition threshold, the tax benefit is measured as the largest amount that is judged to have a greater than 50% likelihood of being realized upon ultimate settlement with a taxing authority. The liability associated with unrecognized tax benefits is adjusted periodically due to changing circumstances and when new information becomes available. Such adjustments are recognized entirely in the period in which they are identified. The effective tax rate includes the net impact of changes in the liability for unrecognized tax benefits and subsequent adjustments as considered appropriate by the Company. While it is often difficult to predict the final outcome or the timing of resolution of any particular tax matter, the Company believes its liability for unrecognized tax benefits is adequate. Interest and penalties recognized on the liability for unrecognized tax benefits are recorded as income tax expense.

 

 

p.

Foreign Currency Translation – Assets and liabilities of foreign subsidiaries using currencies other than the U.S. dollar as their functional currency are translated into U.S. dollars at period-end exchange rates or historical exchange rates, where applicable, and income and expense items are translated at average exchange rates for the period. Gains and losses resulting from translation are recorded as currency translation adjustments in comprehensive earnings.

 

 

q.

Stock-Based Compensation – The Company accounts for employee stock options, the only form of equity compensation issued by the Company, as compensation expense based on the fair value of the options on the date of grant and recognizes such expense on a straight-line basis over the four-year service period during which the options become exercisable. The Company determines the fair value of such options using the Black-Scholes option pricing model. The Black-Scholes option pricing model incorporates certain assumptions relating to risk-free interest rate, expected volatility, expected dividend yield and expected life of options, in order to arrive at a fair value estimate.

 

 

r.

Treasury Stock The Company considers all shares of the Company’s common stock purchased by the Company as authorized but unissued shares on the trade date. The aggregate purchase price of such shares is reflected as a reduction to Shareholders’ Equity, and such shares are held in treasury at cost.

 

 
51

 

 

2.

MArketable Securities

 

The following is a summary of available-for-sale securities:

 

   

February 26, 2017

 
   

Total

   

Level 1

   

Level 2

   

Level 3

 
                                 

U.S. Treasury and other government securities

  $ 111,261     $ 111,261     $ -     $ -  

U.S. corporate debt securities

    24,891       24,891       -       -  

Total marketable securities

  $ 136,152     $ 136,152     $ -     $ -  

 

   

February 28, 2016

 
   

Total

   

Level 1

   

Level 2

   

Level 3

 
                                 

U.S. Treasury and other government securities

  $ 118,194     $ 118,194     $ -     $ -  

U.S. corporate debt securities

    21,474       21,474       -       -  

Total marketable securities

  $ 139,668     $ 139,668     $ -     $ -  

 

The following tables show the amortized cost basis, gross unrealized gains and losses and gross realized gains and losses on the Company’s available-for-sale securities:

 

 

   

Amortized

Cost Basis

   

Gross

Unrealized

Gains

   

Gross

Unrealized

Losses

 
                         

February 26, 2017:

                       

U.S. Treasury and other government securities

  $ 111,727     $ 136     $ 602  
                         

U.S. corporate debt securities

    24,938       1       48  

Total marketable securities

  $ 136,665     $ 137     $ 650  
                         

February 28, 2016:

                       

U.S. Treasury and other government securities

  $ 117,897     $ 372     $ 74  
                         

U.S. corporate debt securities

    21,554       -       81  

Total marketable securities

  $ 139,451     $ 372     $ 155  

 

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

Gross realized gains on sale

  $ -     $ -     $ 17  
                         

Gross realized losses on sale

  $ -     $ -     $ 44  

 

 
52

 

 

The estimated fair values of such securities at February 26, 2017, by contractual maturity, are shown below:

 

Due in one year or less

  $ 53,250  

Due after one year through five years

    82,902  
    $ 136,152  

 

 

3.

Other balance sheet data

 

Other balance sheet data consisted of the following:

 

 

   

February 26,

   

February 28,

 
   

2017

   

2016

 
                 

Inventories:

               
                 

Raw materials

  $ 5,842     $ 5,462  

Work-in-process

    2,329       2,215  

Finished goods

    2,585       2,172  

Manufacturing supplies

    349       365  
    $ 11,105     $ 10,214  
                 

Property, plant and equipment:

               
                 

Land, buildings and improvements

  $ 39,822     $ 39,915  

Machinery, equipment, furniture and fixtures

    129,696       130,143  
      169,518       170,058  

Less: accumulated depreciation and amortization

    150,880       148,546  
    $ 18,638     $ 21,512  
                 

Goodwill and other intangible assets:

               
                 

Goodwill

  $ 9,776     $ 9,776  

Other intangibles

    49       57  
    $ 9,825     $ 9,833  
                 

Accrued liabilities:

               
                 

Payroll and payroll related

  $ 1,361     $ 2,078  

Employee benefits

    147       279  

Workers' compensation

    154       241  

Professional fees

    578       762  

Restructuring (Note 8)

    16       64  

Other

    1,161       1,156  
    $ 3,417     $ 4,580  

 

Property, Plant and Equipment The New England Laminates Co., Inc. building in Newburgh, New York is held for sale. In the 2004 fiscal year, the Company reduced the book value of the building to zero, and the Company intends to sell it during the 2018 fiscal year. The Company sold the Nelco Technology (Zhuhai FTZ) Ltd. building for $2,026 during the 2016 fiscal year. There was no gain or loss on the sale of the building, since the carrying value of the building was equal to the selling price.

 

 
53

 

 

4.

Income Taxes

 

The income tax provision includes the following:

  

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

Current:

                       

Federal

  $ (532 )   $ 10,118     $ -  

State and local

    (40 )     (120 )     (39 )

Foreign

    3,083       3,883       5,601  
      2,511       13,881       5,562  
                         

Deferred:

                       

Federal

    (369 )     (11,273 )     (2,238 )

State and local

    (590 )     (205 )     (290 )

Foreign

    (574 )     66       (287 )
      (1,533 )     (11,412 )     (2,815 )
    $ 978     $ 2,469     $ 2,747  

 

 

State income tax benefits from loss carryforwards to future years were recognized as deferred tax assets in the 2017, 2016 and 2015 fiscal years.

 

The Company continuously evaluates the liquidity and capital requirements of its operations in the United States and of its foreign subsidiaries. As a result of such evaluations, the Company repatriated $6,800, $61,000 and $0 in cash from Nelco Products Pte Ltd. in the 2017, 2016 and 2015 fiscal years, respectively.

 

The Company’s pre-tax earnings from the United States and foreign locations are as follows:

 

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

United States

  $ (4,742 )   $ (3,331 )   $ (6,704 )

Foreign

    15,003       23,829       29,494  

Earnings before income taxes

  $ 10,261     $ 20,498     $ 22,790  

 

 
54

 

 

The Company’s effective income tax rate differs from the statutory U.S. Federal income tax rate as a result of the following:

 

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

Statutory U.S. Federal tax rate

    34.0 %     35.0 %     34.0 %

State and local taxes, net of Federal benefit

    2.4 %     1.2 %      (1.1 %) 

Foreign tax rate differentials

    (24.4 %)     (21.0 %)     (22.2 %)

Valuation allowance on deferred tax assets

    (5.3 %)     (0.2 %)     0.6 %

Adjustment on tax accruals

    6.8 %     3.3 %      1.3

Foreign tax credits

    (3.3 %)     (1.1 %)     (0.5 %)

Deferred tax liability on undistributed foreign earnings

    (3.4 %)     (4.5 %)     -  

Permanent differences and other

    2.7 %     (0.7 %)     -  
      9.5 %     12.0 %     12.1 %

 

The Company had federal net operating loss carryforwards of $0 in the 2017 and 2016 fiscal years, state net operating loss carryforwards of approximately $16,343 and $10,083 in the 2017 and 2016 fiscal years, respectively, and total net foreign operating loss carryforwards of approximately $30,647 and $30,871 in the 2017 and 2016 fiscal years, respectively. The foreign net operating loss carryforwards were not utilized in the 2016 fiscal year and the Company has set up a valuation allowance for such carryforwards. The state net operating loss carryforwards will expire in 2018 through 2037.

 

The Company had foreign tax credit carryforwards of $258 and $524 at February 26, 2017 and February 28, 2016, respectively, which expire in 2027. As of February 26, 2017 and February 28, 2016, research and development and other credits were $47 and $0, respectively.

 

The Company had New York State investment tax credit carryforwards of $0 and $478 in the 2017 and 2016 fiscal years, respectively.  The New York State investment tax credits expired in fiscal year 2017.  The Company had Kansas tax credits of $225 in both fiscal years 2017 and 2016, for which no benefit has been provided. The Company does not believe that realization of the principal portion of the Kansas tax credit or the investment tax credit carryforward is more likely than not.  The Kansas credits do not have expiration dates.  The Company had Arizona tax credits of $135 in both fiscal years 2017 and 2016, for which no benefit has been provided.

 

The deferred tax asset valuation allowance of $10,571 as of February 26, 2017 relates to foreign net operating losses and state tax credit carryforwards for which the Company does not expect to realize any tax benefit. During the 2017 fiscal year, the valuation allowance decreased by $544 primarily due to the expiration of the New York State investment tax credit carryforwards for which no tax benefit was recognized. Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts for income tax purposes.

 

 
55

 

 

Significant components of the Company's deferred tax assets and liabilities as of February 26, 2017 and February 28, 2016 were as follows:

 

   

February 26,

   

February 28,

 
   

2017

   

2016

 
                 

Deferred tax assets:

               

Depreciation and amortization

  $ 3,740     $ 3,761  

Net operating loss carryforwards

    11,049       10,800  

Tax credits carryforward

    677       1,363  

Stock options

    1,865       1,925  

Other, net

    282       578  
      17,613       18,427  

Valuation allowance on deferred tax assets

    (10,571 )     (11,115 )

Total deferred tax assets, net of valuation allowance

    7,042       7,312  

Deferred tax liabilities:

               

Depreciation

    (572 )     (526 )

Undistributed earnings

    (47,509 )     (48,865 )

Other

    (781 )     (1,281 )

Total deferred tax liabilities

    (48,862 )     (50,672 )

Net deferred tax liability

  $ (41,820 )   $ (43,360 )

 

 

On the Consolidated Balance Sheets, the deferred tax asset, net of valuation allowance, of $268 at February 26, 2017 was included in other assets and the deferred tax asset, net of valuation allowance, of $584 at February 28, 2016 was included in prepaid expenses and other current assets.

 

At February 26, 2017 and February 28, 2016, the Company had gross unrecognized tax benefits of $1,041 and $1,295, respectively, included in other liabilities. If any portion of the unrecognized tax benefits at February 26, 2017 were recognized, the Company’s effective tax rate would change.

 

As discussed in Note 16, on February 28, 2016 the Company early adopted Accounting Standards Update 2015-17 Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes on a prospective basis. The early adoption of this guidance did not impact the Company’s results of operations, cash flows or financial condition. 

 

 
56

 

 

A reconciliation of the beginning and ending amounts of unrecognized tax benefits is as follows:

 

    Unrecognized Tax Benefits  
   

February 26,

   

February 28,

   

March 1,

 
   

2017

   

2016

   

2015

 
                         

Balance, beginning of year

  $ 1,255     $ 1,135     $ 276  

Gross decreases-tax positions in prior period

    (293 )     -       (21 )

Gross increases-current period tax positions

    274       271       880  

Audit settlements

    (42     (57 )     -  

Lapse of statute of limitations

    (170 )     (94 )     -  

Balance, end of year

  $ 1,024     $ 1,255     $ 1,135  

 

The amount of unrecognized tax benefits may increase or decrease in the future for various reasons, including adding or subtracting amounts for current year tax positions, expiration of statutes of limitations on open income tax years, changes in the Company’s judgment about the level of uncertainty, status of tax examinations, and legislative changes. Changes in prior period tax positions are the result of a re-evaluation of the probability of realizing the benefit of a particular tax position based on new information. It is reasonably possible that none of the unrecognized tax benefits will be recognized in the 2018 fiscal year upon the expiration of statutes of limitations.

 

A list of open tax years by major jurisdiction follows:

 

California

    2014 - 2017  

New York

    2012 - 2017  

France

    2014 - 2017  

Singapore

    2013 - 2017  

 

The Company had approximately $16 and $51 of accrued interest and penalties as of February 26, 2017 and February 28, 2016, respectively. The Company’s policy is to include applicable interest and penalties related to unrecognized tax benefits as a component of current income tax expense.

 

The New York State Department of Taxation is examining the Company’s tax returns for the 2012, 2013, 2014 and 2015 fiscal years.

 

5.

STOCK-BASED COMPENSATION

 

As of February 26, 2017, the Company had a 2002 Stock Option Plan (the “Plan”) and no other stock-based compensation plan. The Plan has been approved by the Company’s shareholders and provides for the grant of stock options to directors and key employees of the Company. All options granted under the Plan have exercise prices equal to the fair market value of the underlying common stock of the Company at the time of grant, which, pursuant to the terms of the Plan, is the reported closing price of the common stock on the New York Stock Exchange on the date preceding the date the option is granted. Options granted under the Plan become exercisable 25% one year after the date of grant, with an additional 25% exercisable each succeeding anniversary of the date of grant, and expire 10 years after the date of grant. Options to purchase a total of 1,800,000 shares of common stock were authorized for grant under the Plan. At February 26, 2017, 1,466,030 shares of common stock of the Company were reserved for issuance upon exercise of stock options under the Plan, and 395,501 options were available for future grant under the Plan.

 

 
57

 

 

The compensation expense for stock options includes an estimate for forfeitures and is recognized on a straight-line basis over the requisite service period.

 

The future compensation expense to be recognized in earnings before income taxes for options outstanding at February 26, 2017 was $1,852, which is expected to be recognized ratably over a weighted average vesting period of 2.02 years.

 

The Company records its stock-based compensation at fair value. The weighted average fair value for options was estimated at the dates of grants, using the Black-Scholes option pricing model.

 

The following table represents the weighted average fair value and valuation assumptions used for options granted in the 2017, 2016 and 2015 fiscal years:

 

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                                 

Weighted average fair value per share of option grants

    $3.15         $5.30           $8.05    

Risk-free interest rates

    1.77%       1.57 - 1.86%       2.03 - 2.18%  

Expected stock price volatility

    28.9%       27.91 - 31.71%       31.07 - 31.59%  

Expected dividend yields

    2.23%       1.84 - 2.76%       1.34 - 1.77%  

Estimated option terms (in years)

    5.3       5.3 - 7.9         7.8    

 

The risk-free interest rates are based on U.S. Treasury rates at the date of grant with maturity dates approximately equal to the estimated term of the options at the date of the grant. Volatility factors are based on historical volatility of the Company’s common stock. The expected dividend yields are based on the regular quarterly cash dividend per share most recently declared by the Company and on the exercise price of the options granted during the 2017 fiscal year. The estimated terms of the options are based on evaluations of the historical and expected future employee exercise behavior.

 

During the fourth quarter of the 2015 fiscal year, the Company’s Board of Directors approved a reduction of $1.50 per share in the exercise price of all outstanding options as a result of the special cash dividend of $1.50 per share paid by the Company in February 2015. The reduction in the exercise price was treated as a modification of the stock options for accounting purposes. The modification, based on the fair value of the options both immediately before and after the modification, resulted in total incremental compensation expenses of $47 and $131 for the 2017 and 2016 fiscal years, respectively, which were recorded in selling, general and administrative expenses.

 

 
58

 

 

Information with respect to stock option activity follows:

 

   

Outstanding

Options

   

Weighted

Average

Exercise Price

   

Weighted Average

Remaining

Contractual Term

(in years)

   

Aggregate

Intrinsic

Value

 
                                 

Balance, March 2, 2014

    1,081,117     $ 23.84                  

Granted

    18,000       25.81                  

Exercised

    (79,800 )     21.49                  

Terminated or expired

    (52,625 )     24.21                  

Granted under option modification

    996,892       22.55                  

Cancelled under option modification

    (996,892 )     24.05                  

Balance, March 1, 2015

    966,692     $ 22.55                  

Granted

    379,450       17.82                  

Exercised

    (2,500 )     19.91                  

Terminated or expired

    (117,250 )     21.53                  

Balance, February 28, 2016

    1,226,392     $ 21.19                  

Granted

    1,250       14.07                  

Exercised

    -       -                  

Terminated or expired

    (157,113 )     21.66                  

Balance, February 26, 2017

    1,070,529     $ 21.08       5.52     $ -  

Vested and exercisable, February 26, 2017

    762,217     $ 22.07       4.40     $ -  

Expected to vest, February 26, 2017

     1,009,509     $ 21.08       5.52     $ -  

 

The aggregate intrinsic values realized (the market value of the underlying shares on the date of exercise, less the exercise price, times the number of shares acquired) from the exercise of options during the 2017, 2016 and 2015 fiscal years were $0, $4 and $688, respectively.

 

A summary of the status of the Company’s non-vested options at February 26, 2017, and changes during the fiscal year then ended, is presented below:

 

 

   

Shares Subject

to Options

   

Weighted

Average Grant

Date Fair Value

 
                 

Non-vested, beginning of year

    504,867     $ 8.27  

Granted

    1,250       3.15  

Vested

    (136,505 )     6.44  

Terminated or expired

    (61,300 )     7.84  

Non-vested, end of year

    308,312     $ 6.09  

 

6.

SHAREHOLDERS’ EQUITY

 

Treasury Stock – On January 8, 2015, the Company announced that its Board of Directors has authorized the Company’s purchase, on the open market and in privately negotiated transactions, of up to 1,250,000 shares of its common stock, representing approximately 6% of the Company’s 20,945,634 total outstanding shares as of the close of business on January 7, 2015. This authorization superseded all prior Board of Directors’ authorizations to purchase shares of the Company’s common stock.

 

 On March 10, 2016, the Company announced that its Board of Directors authorized the Company’s purchase, on the open market and in privately negotiated transactions, of up to 1,000,000 additional shares of its common stock, in addition to the unused prior authorization to purchase shares of the Company’s common stock announced on January 8, 2015. As a result, the Company is authorized to purchase up to a total of 1,531,412 shares of its common stock, representing approximately 7.6% of the Company’s 20,234,671 total outstanding shares as of the close of business on May 5, 2017.

 

 
59

 

 

During the 2016 fiscal year, the Company purchased 599,832 shares pursuant to the above authorizations at an aggregate purchase price of $12,187, leaving 1,531,412 shares that may be purchased pursuant to the January 8, 2015 and March 10, 2016 authorizations.

 

Reserved Common Shares – At February 26, 2017, 1,466,030 shares of common stock were reserved for issuance upon exercise of stock options.

 

Accumulated Other Comprehensive Earnings – Accumulated balances related to each component of other comprehensive earnings were as follows:

 

 

   

February 26, 2017

   

February 28, 2016

 
                 

Currency translation adjustment

  $ 1,360     $ 1,330  

Unrealized gains (losses) on investments, net of taxes of $(180) and $76, respectively

    (334 )     141  

Accumulated balance

  $ 1,026     $ 1,471  

 

7.

EARNINGS PER SHARE

 

Basic earnings per share are computed by dividing net earnings by the weighted average number of shares of common stock outstanding during the period. Diluted earnings per share are computed by dividing net earnings by the sum of (a) the weighted average number of shares of common stock outstanding during the period and (b) the potential common stock equivalents outstanding during the period. Stock options are the only common stock equivalents; and the number of dilutive options is computed using the treasury stock method.

 

The following table sets forth the calculation of basic and diluted earnings per share:

 

   

Fiscal Year

 

(Amounts in thousands, except per share amounts)

 

2017

   

2016

   

2015

 
                         

Net earnings

  $ 9,283     $ 18,029     $ 20,043  
                         

Weighted average common shares outstanding for basic EPS

    20,235       20,347       20,912  

Net effect of dilutive options

    4       5       74  

Weighted average shares outstanding for diluted EPS

    20,239       20,352       20,986  
                         

Basic earnings per share

  $ 0.46     $ 0.89     $ 0.96  

Diluted earnings per share

  $ 0.46     $ 0.89     $ 0.96  

 

Potentially dilutive stock options, which were not included in the computation of diluted earnings per share because either the effect would have been antidilutive or the options’ exercise prices were greater than the average market price of the common stock, were 884,905, 919,509 and 192,063 for the 2017, 2016 and 2015 fiscal years, respectively.

 

 
60

 

 

8.

restructuring charges

 

The Company paid $0 and $100 of additional pre-tax restructuring charges during the 2017 and 2016 fiscal years, respectively, related to the closure in the 2013 fiscal year of the Company’s Nelco Technology (Zhuhai FTZ) Ltd. business unit located in Zhuhai, China. The Company sold the Nelco Technology (Zhuhai FTZ) Ltd. building for $2,026 during the 2016 fiscal year. There was no gain or loss on the sale of the building, since the carrying value of the building was equal to the selling price. 

 

The Company recorded additional restructuring charges of $313 and $435 in the 2017 and 2016 fiscal years, respectively, related to the closure in the 2009 fiscal year of the Company’s New England Laminates Co., Inc. business unit located in Newburgh, New York. The New England Laminates Co., Inc. building in Newburgh, New York is held for sale. In the 2004 fiscal year, the Company reduced the book value of the building to zero, and the Company intends to sell it during the 2018 fiscal year.

 

In the 2015 fiscal year, the Company recorded a $496 charge in connection with cost reduction initiatives in the United States. During the 2016 and 2015 fiscal years, the Company paid $504 of charges related to such cost reduction initiatives, and there is no remaining liability related to such initiatives.

 

9.

Employee Benefit Plans

 

Profit Sharing Plan – The Company and certain of its subsidiaries have a non-contributory profit sharing retirement plan covering substantially all full-time employees in the United States. The plan may be modified or terminated at any time, but in no event may any portion of the contributions revert back to the Company. The Company's estimated contributions are accrued at the end of each fiscal year and paid to the plan in the subsequent fiscal year. The Company’s contributions to the plan were $212 and $100 for fiscal years 2016 and 2015, respectively. The contribution for fiscal year 2017 has not been determined or paid. Contributions are discretionary and may not exceed the amount allowable as a tax deduction under the Internal Revenue Code.

 

Savings Plan – The Company also sponsors a 401(k) savings plan, pursuant to which the contributions of employees of certain subsidiaries were partially matched by the Company in the amounts of $101, $112 and $123 in the 2017, 2016 and 2015 fiscal years, respectively.

 

10.

LONG-TERM DEBT

 

On January 15, 2016, the Company entered into a three-year revolving credit facility agreement (the “Credit Agreement”) with HSBC Bank USA, National Association (“HSBC Bank”). This Credit Agreement replaced the Amended Credit Agreement that the Company entered into with PNC Bank in February 2014. The Credit Agreement provides for loans up to $75,000 and letters of credit up to $2,000. During the 2016 fiscal year, the Company made no payments in accordance with the Credit Agreement. The $75,000 is payable in twelve quarterly installments of $750 each, with the remaining amount outstanding under the Credit Agreement payable on January 26, 2019. Pursuant to an amendment entered into on April 21, 2017, the first and second installments due in the 2018 fiscal year were increased from $750 to $1,000.

 

Borrowings under the Credit Agreement bear interest at a rate equal to, at the Company’s option, either (a) a fluctuating rate per annum (computed on the basis of a year of 365 or 366 days, as the case may be, and actual days elapsed) equal to the Base Rate, such interest rate to change automatically from time to time effective as of the effective date of each change in the Base Rate or (b) a rate per annum (computed on the basis of a year of 360 days and actual days elapsed) equal to the one, two, three or six month LIBOR Rate plus 1.15%. Under the Credit Agreement, the Company is also obligated to pay to HSBC Bank a nonrefundable commitment fee equal to 0.10% per annum (computed on the basis of a year of 360 days and actual days elapsed) multiplied by the average daily difference between the amount of (i) the revolving credit commitment plus the letter of credit facility and (ii) the revolving facility usage, payable quarterly in arrears.

 

 
61

 

 

On January 5, 2017, the Company entered into an amendment to the Credit Agreement (the “Amended Credit Agreement”) with HSBC Bank that modified the LIBOR interest rate and certain covenants. Under the Amended Credit Agreement, the LIBOR interest rate will be equal to the one, two, three, or six month LIBOR plus (a) 1.65% through April 5, 2017, (b) 1.90% from April 6, 2017 through July 5, 2017, (c) 2.15% from July 6, 2017 through October 5, 2017 and (d) 2.65% after October 5, 2017.

 

The Credit Agreement and the Amended Credit Agreement contain certain customary affirmative and negative covenants, including customary financial covenants. The covenants require the Company to (a) maintain a gross leverage charge ratio not to exceed 4.50 to 1.00 for the fiscal quarters ending February 26, 2017 and May 28, 2017, 4.25 to 1.00 for the fiscal quarter ending August 27, 2017 and 3.75 to 1.00 each fiscal quarter thereafter, (b) maintain a minimum fixed charge coverage ratio of 0.30 to 1.00 for the fiscal quarter ending February 26, 2017, 0.20 to 1.00 for the fiscal quarter ending May 28, 2017, 0.50 to 1.00 for the fiscal quarter ending August 27, 2017 and 1.10 to 1.00 for each fiscal quarter thereafter, and (c) maintain a minimum quick ratio of 2.00 to 1.00 beginning with the fiscal quarter first ending after January 26, 2016 and continuing thereafter. In addition, the Company must maintain minimum domestic liquid assets of $10,000 in cash held at all times in a domestic deposit account. The Company is in compliance with all the financial covenants.

 

At February 26, 2017, $72,000 of indebtedness was outstanding under the Credit Agreement with an interest rate of 2.49%. Interest expense recorded under both the PNC Bank Amended Credit Agreement and the Credit Agreement was approximately $1,432, $1,365 and $1,438 during the 2017, 2016 and 2015 fiscal years, respectively, which is included in interest expense on the Consolidated Statements of Operations. In addition, the Company accelerated the deferred financing costs of $292 which related to the PNC Bank Amended Credit Agreement that was recorded as interest expense in the fourth quarter of the 2016 fiscal year.

 

At February 26, 2017, scheduled principal maturities of long-term debt were as follows:

 

 

Fiscal Year

 

Amount

 

2018

  $ 3,500  

2019

    68,500  
      72,000  

Less: current portion

    3,500  
    $ 68,500  

 

11.

Commitments

 

The Company conducts certain of its operations in leased facilities, which include several manufacturing plants, warehouses and offices. The leases of facilities are for terms of up to 10 years, the latest of which expires in 2021. Many of the leases contain renewal options for periods ranging from one to ten years and require the Company to pay real estate taxes and other operating costs. The latest land lease expiration is 2040.

 

 
62

 

 

These non-cancelable leases have the following payment schedule:

 

Fiscal Year

 

Amount

 
         

2018

  $ 1,937  

2019

    1,709  

2020

    1,694  

2021

    1,262  

2022

    338  

Thereafter

    2,743  
    $ 9,683  

 

 

Rental expenses, inclusive of real estate taxes and other costs, were $2,018, $2,774 and $2,881 for the 2017, 2016 and 2015 fiscal years, respectively.

 

12.

CONTINGENCIES

 

Litigation 

 

The Company is subject to a number of proceedings, lawsuits and other claims related to environmental, employment, product and other matters. The Company is required to assess the likelihood of any adverse judgments or outcomes in these matters as well as potential ranges of probable losses. A determination of the amount of reserves required, if any, for these contingencies is made after careful analysis of each individual issue. The required reserves may

change in the future due to new developments in each matter or changes in approach, such as a change in settlement strategy in dealing with these matters. The Company believes that the ultimate disposition of such proceedings, lawsuits and claims will not have a material adverse effect on the liquidity, capital resources, business or consolidated results of operations or financial position of the Company.

 

Environmental Contingencies 

 

The Company and certain of its subsidiaries have been named by the Environmental Protection Agency (the "EPA") or a comparable state agency under the Comprehensive Environmental Response, Compensation and Liability Act (the "Superfund Act") or similar state law as potentially responsible parties in connection with alleged releases of hazardous substances at four sites.

 

Under the Superfund Act and similar state laws, all parties who may have contributed any waste to a hazardous waste disposal site or contaminated area identified by the EPA or comparable state agency may be jointly and severally liable for the cost of cleanup. Generally, these sites are locations at which numerous persons disposed of hazardous waste. In the case of the Company's subsidiaries, generally the waste was removed from their manufacturing facilities and disposed at waste sites by various companies which contracted with the subsidiaries to provide waste disposal services. Neither the Company nor any of its subsidiaries have been accused of or charged with any wrongdoing or illegal acts in connection with any such sites. The Company believes it maintains an effective and comprehensive environmental compliance program.

 

The insurance carriers who provided general liability insurance coverage to the Company and its subsidiaries for the years during which the Company's subsidiaries' waste was disposed at these sites have in the past reimbursed the Company and its subsidiaries for 100% of their legal defense and remediation costs associated with three of these sites.

 

 
63

 

 

The total costs incurred by the Company and its subsidiaries in connection with these sites, including legal fees incurred by the Company and its subsidiaries and their assessed share of remediation costs and excluding amounts expected to be reimbursed by insurance carriers, were approximately $0, $2 and $23 in the 2017, 2016 and 2015 fiscal years, respectively. The Company had no recorded liabilities for environmental matters for the 2017 and 2016 fiscal years.

 

Such recorded liabilities do not include environmental liabilities and related legal expenses for which the Company believes that it and its subsidiaries have general liability insurance coverage for the years during which the Company's subsidiaries' waste was disposed at three sites for which certain subsidiaries of the Company have been named as potentially responsible parties. Pursuant to such general liability insurance coverage, three insurance carriers reimburse the Company and its subsidiaries for 100% of the legal defense and remediation costs associated with the three sites.

 

Included in selling, general and administrative expenses are charges for actual expenditures and accruals, based on estimates, for certain environmental matters described above. The Company accrues estimated costs associated with known environmental matters, when such costs can be reasonably estimated and when the outcome appears probable. The Company believes that the ultimate disposition of known environmental matters will not have a material adverse effect on the Company’s results of operations, cash flows or financial position.

 

13.

GEOGRAPHIC REGIONS

 

The Company is a global advanced materials company which develops and manufactures advanced composite materials, primary and secondary structures and assemblies and low-volume tooling for the aerospace markets and high-technology digital and RF/microwave printed circuit materials principally for the telecommunications and internet infrastructure, enterprise and military markets. The Company’s products are sold to customers in North America, Asia and Europe. The Company’s manufacturing facilities are located in Kansas, Singapore, France, Arizona and California. The Company operates as a single operating segment, which is advanced materials for the electronics and aerospace markets, with common management and identical or very similar economic characteristics, products, raw materials, manufacturing processes and equipment, customers and markets, marketing, sales and distribution methods and regulatory environments. The chief operating decision maker reviews financial information on a consolidated basis.

 

Sales are attributed to geographic region based upon the region in which the materials were delivered to the customer. Sales between geographic regions were not significant.

 

 
64

 

 

Financial information regarding the Company’s operations by geographic region is as follows:

  

   

Fiscal Year

 
   

2017

   

2016

   

2015

 
                         

Sales:

                       
                         

North America

  $ 60,949     $ 75,215     $ 75,395  

Asia

    44,613       61,264       76,000  

Europe

    9,047       9,376       10,691  

Total sales

  $ 114,609     $ 145,855     $ 162,086  
                         

Long-lived assets:

                       
                         

North America

  $ 20,794     $ 22,846     $ 23,562  

Asia

    8,440       9,478       12,490  

Europe

    214       268       325  

Total long-lived assets

  $ 29,448     $ 32,592     $ 36,377  

 

14.

Customer and Supplier Concentrations

 

Customers – Sales to TTM Technologies Inc. were 16.2% and 13.8% for the 2017 and 2016 fiscal years, respectively. During the Company’s 2015 fiscal year, the Company did not have sales to any customer that equaled or exceeded 10% of the Company’s worldwide sales.

 

While no other customer accounted for 10% or more of the Company's total worldwide sales in the 2017 or 2016 fiscal years, the loss of a major customer or of a group of customers could have a material adverse effect on the Company's business or consolidated results of operations or financial position.

 

Sources of Supply – The principal materials used in the manufacture of the Company's high-technology printed circuit materials and advanced composite materials, parts and assemblies are specially manufactured copper foil, fiberglass cloth and synthetic reinforcements, and specially formulated resins and chemicals. Although there is a limited number of qualified suppliers of these materials, the Company has nevertheless identified alternate sources of supply for many of such materials. While the Company has not experienced significant problems in the delivery of these materials and considers its relationships with its suppliers to be strong, a disruption of the supply of material from a principal supplier could adversely affect the Company's business. Furthermore, substitutes for these materials are not readily available, and an inability to obtain essential materials, if prolonged, could materially adversely affect the Company’s business.

 

15.

SUBSEQUENT EVENT

 

On April 18, 2017, the Company announced the consolidation of its Nelco Products, Inc. subsidiary located in Fullerton, California and its Neltec, Inc. subsidiary located in Tempe, Arizona. The consolidation is expected to take four to six months to complete. When complete, all business functions will be performed at Neltec in Tempe, Arizona and certain manufacturing operations will be combined and performed at Neltec.

 

Park expects to incur a pre-tax charge in connection with the consolidation of approximately $5,000 to $5,500. This charge is expected to be incurred primarily during the first nine months of the fiscal year ending February 25, 2018. In addition to this charge, the Company expects to incur duplicative pre-tax costs of $300 during the same nine-month period. When the consolidation is complete, the Company expects an ongoing pre-tax benefit from the consolidation of approximately $3,000 to $3,500 per year.

 

 
65

 

 

16.

ACCOUNTING PRONOUNCEMENTS

 

Recently Adopted

 

In November 2015, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update ("ASU") No. 2015-17, Income Taxes (Topic 740): Balance Sheet Classification of Deferred Taxes, as part of the FASB’s Simplification Initiative to identify, evaluate, and improve areas of US GAAP for which cost and complexity can be reduced while maintaining or improving the usefulness of the information provided to users. The ASU simplifies the presentation of deferred income taxes under US GAAP by requiring that all deferred tax assets and liabilities be classified as non-current. For public companies, the ASU is effective for financial statements issued for fiscal years beginning after December 15, 2016 and interim reporting periods within those fiscal years. Earlier application is permitted for all entities as of the beginning of an interim or annual reporting period. The Company elected to early adopt this guidance retrospectively in the fourth quarter of the Company’s 2016 fiscal year, and the early adoption of this guidance did not impact the Company’s results of operations, cash flows or financial condition.

 

Recently Issued

 

In November 2016, the FASB issued Accounting Standards Update (“ASU”) No. 2016-18, Statement of Cash Flows (Topic 230): Restricted Cash, to reduce the diversity that exists in the classification and presentation of changes in restricted cash in the statement of cash flows. The new standard is effective for fiscal years beginning after December 15, 2017 and the interim periods within those fiscal years. The Company is currently evaluating the impact this new guidance may have on its consolidated cash flows.

 

 
66

 

 

In August 2016, the FASB issued ASU No. 2016-15, Statement of Cash Flows (Topic 230) Classification of Certain Cash Receipts and Cash Payments, to reduce the diversity in how certain cash receipts and cash payments are presented and classified in the statement of cash flows.  The new standard is effective for fiscal years beginning after December 15, 2017 and the interim periods within those fiscal years.  The Company is currently evaluating the impact that this new guidance may have on its consolidated cash flows. 

 

In March 2016, the FASB issued Accounting Standards Update (“ASU”) No. 2016-09, Compensation – Stock Compensation (Topic 718): Improvements to Employee Share-Based Payment Accounting, to improve the accounting for employee share-based payments. The new standard is effective for fiscal years beginning after December 15, 2016 and the interim periods within those fiscal years. The Company has concluded that this guidance will not have a significant impact on its consolidated results of operations, cash flows, financial position and disclosures.

 

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842), intended to increase transparency and comparability among companies by requiring most leases to be included on the balance sheet and by expanding disclosure requirements, effective for public business entities for fiscal years beginning after December 15, 2018, including interim periods within those fiscal years (i.e., January 1, 2019, for a calendar year entity). Early application is permitted for all public business entities and all nonpublic business entities upon issuance. The Company is currently evaluating the impact that this new guidance may have on its consolidated results of operations, cash flows, financial position and disclosures.

 

In May 2014, the FASB issued Accounting Standards Codification (“ASC”) Topic 606, Revenue from Contracts with Customers, which supersedes the revenue recognition requirements in ASC Topic 605, Revenue Recognition, including most industry-specific revenue recognition guidance throughout the Industry Topics of the Codification. This guidance requires that an entity recognize revenue to depict the transfer of promised goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services, and expands the related disclosure requirements. The new standard was originally scheduled to be effective for fiscal years beginning after December 15, 2016, including interim reporting periods within those fiscal years. In August 2015, the FASB delayed the effective date of this guidance for one year. With the delay, the new standard is effective for fiscal years beginning after December 15, 2017, and interim periods therein, with an option to adopt the standard on the originally scheduled effective date. The Company has concluded that this new guidance will not have a significant on its consolidated results of operations, cash flows, financial position and disclosures.

 

 
67

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

Selected Quarterly Financial Data (Unaudited)

(Amounts in thousands, except per share amounts)

  

   

Quarter

 
   

First

   

Second

   

Third

   

Fourth

 
                                 

Fiscal 2017:

                               
                                 

Net sales

  $ 31,490     $ 29,058     $ 26,462     $ 27,599  

Gross profit

    8,787       7,234       6,634       7,386  
                                 

Net earnings

    2,950       1,981       1,875       2,477  
                                 

Basic net earnings per share

  $ 0.15     $ 0.10     $ 0.09     $ 0.12  

Diluted net earnings per share

  $ 0.15     $ 0.10     $ 0.09     $ 0.12  
                                 

Weighted average common shares outstanding:

                               

Basic

    20,235       20,235       20,235       20,235  

Diluted

    20,235       20,235       20,235       20,253  
                                 
                                 

Fiscal 2016:

                               
                                 

Net sales

  $ 37,829     $ 37,947     $ 34,323     $ 35,756  

Gross profit

    11,367       10,361       10,297       10,727  
                                 

Net earnings

    4,777       4,569       4,109       4,574  
                                 

Basic net earnings per share

  $ 0.23     $ 0.23     $ 0.20     $ 0.23  

Diluted net earnings per share

  $ 0.23     $ 0.23     $ 0.20     $ 0.23  
                                 

Weighted average common shares outstanding:

                               

Basic

    20,546       20,337       20,253       20,251  

Diluted

    20,565       20,340       20,253       20,251  

 

Earnings per share are computed separately for each quarter. Therefore, the sum of such quarterly per share amounts may differ from the total for each year.

 

ITEM 9.

CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.

 

Not applicable.

 

ITEM 9A.

CONTROLS AND PROCEDURES.

 

(a)     Disclosure Controls and Procedures.

 

The Company's management, with the participation of the Company's Chief Executive Officer and Chief Financial Officer, has evaluated the effectiveness of the Company's disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934, as amended (the "Exchange Act")) as of February 26, 2017, the end of the fiscal year covered by this annual report. Based on such evaluation, the Company's Chief Executive Officer and Chief Financial Officer have concluded that, as of the end of such fiscal year, the Company's disclosure controls and procedures were effective in recording, processing, summarizing and reporting, on a timely basis, information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act and are effective in ensuring that information required to be disclosed by the Company in the reports that it files or submits under the Exchange Act is accumulated and communicated to the Company’s management, including the Company’s Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

 

 
68

 

 

(b)     Management’s Annual Report on Internal Control Over Financial Reporting.

 

The management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles in the United States of America. The Company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company, (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company, and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

Management assessed the effectiveness of the Company’s internal control over financial reporting as of February 26, 2017. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control–Integrated Framework (2013). Based on management’s assessment and those criteria, management concluded that the Company maintained effective internal control over financial reporting as of February 26, 2017.

 

The independent registered public accounting firm that audited the Company’s 2017 fiscal year consolidated financial statements included in this Annual Report on Form 10-K has issued an audit report on the Company’s internal control over financial reporting as of February 26, 2017. That report appears in Item 9A(c) below.

 

(c)     Report of Independent Registered Public Accounting Firm.

 

 
69

 

  

The Board of Directors and Shareholders

Park Electrochemical Corp.

 

We have audited Park Electrochemical Corp. and subsidiaries’ internal control over financial reporting as of February 26, 2017, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Park Electrochemical Corp.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on Park Electrochemical Corp. and subsidiaries’ internal control over financial reporting based on our audit.

 

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

 

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with accounting principles generally accepted in the United States of America, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

 

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

 

In our opinion, Park Electrochemical Corp. and subsidiaries have maintained, in all material respects, effective internal control over financial reporting as of February 26, 2017, based on the criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission.

 

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated financial statements and financial statement schedule of Park Electrochemical Corp. and subsidiaries as of February 26, 2017 and February 28, 2016 and for each of the three years in the period ended February 26, 2017 and our report dated May 12, 2017, expressed an unqualified opinion thereon.

 

/s/ CohnReznick LLP

 

Jericho, New York

May 12, 2017

 

 
70

 

 

(d)     Changes in Internal Control Over Financial Reporting.

 

There has not been any change in the Company’s internal control over financial reporting (as such term is defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the fourth fiscal quarter of the fiscal year to which this report relates that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

 

ITEM 9B.

OTHER INFORMATION.

 

None.

 

PART III

 

ITEM 10.

DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.

 

The information called for by this item (except for information as to the Company's executive officers, which information appears elsewhere in this Report) is incorporated by reference to the Company's definitive proxy statement for the 2017 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A.

 

ITEM 11.

EXECUTIVE COMPENSATION.

 

The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the 2017 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A.

 

ITEM 12.

SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.

 

The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the 2017 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A.

 

ITEM 13.

CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE.

 

The information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the 2017 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A.

 

ITEM 14.

PRINCIPAL ACCOUNTANT FEES AND SERVICES.

 

This information called for by this Item is incorporated by reference to the Company's definitive proxy statement for the 2017 Annual Meeting of Shareholders to be filed pursuant to Regulation 14A.

 

 
71

 

 

PART IV

 

ITEM 15.

EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 
   

Page

     
 

(a) Documents filed as a part of this Report:

 
     
 

  (1)     Financial Statements:

 
     
 

The following Consolidated Financial Statements of the Company are included in Part II, Item 8:

 
     
 

Report of Independent Registered Public Accounting Firm

41

     
 

Balance Sheets

42

     
 

Statements of Operations

43

     
 

Statements of Comprehensive Earnings

44

     
 

Statements of Shareholders' Equity

45

     
 

Statements of Cash Flows

46

     
 

Notes to Consolidated Financial Statements (1-16)

47

     
 

  (2)     Financial Statement Schedule:

 
     
 

The following additional information should be read in conjunction with the Consolidated Financial Statements of the Registrant described in Item 15(a)(1) above:

 
     
 

Schedule II – Valuation and Qualifying Accounts

74

     
 

All other schedules have been omitted because they are not applicable or not required, or the information is included elsewhere in the financial statements or notes thereto.

 
     
 

  (3)     Exhibits:

 
     
 

The information required by this Item relating to Exhibits to this Report is included in the Exhibit Index beginning on page 75 hereof.

 

 

 
72

 

 

SIGNATURES

 

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

Date: May 12, 2017

PARK ELECTROCHEMICAL CORP.

 

 

 

 

 

 

 

 

 

 

By:

/s/ Brian E. Shore

 

 

 

Brian E. Shore,

 

 

 

Chief Executive Officer

 

 

              

 

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.

 

Signature

Title

Date

 

   

/s/ Brian E. Shore

Brian E. Shore

 

Chairman of the Board, Chief Executive

Officer and Director (principal executive

officer)

 

 

May 12, 2017

     

/s/ P. Matthew Farabaugh

P. Matthew Farabaugh

Senior Vice President and Chief Financial

Officer (principal financial officer and

principal accounting officer)

 

May 12, 2017

 

     

/s/ Dale Blanchfield

Dale Blanchfield

 

Director

 

May 12, 2017

 

/s/ Emily J. Groehl

Emily J. Groehl

 

Director

 

May 12, 2017

 

 

/s/ Carl W. Smith

Carl W. Smith

 

/s/ Steven T. Warshaw

Steven T. Warshaw

 

Director

 

 

Director

 

May 12, 2017

 

 

May 12, 2017

 

 
73

 

 

PARK ELECTROCHEMICAL CORP. AND SUBSIDIARIES

 

SCHEDULE II – VALUATION AND QUALIFYING ACCOUNTS

 

           

Column C

                 

Column A

 

Column B

   

Additions

   

Column D

   

Column E

 
                                         

Description

 

Balance at

Beginning of

Period

   

Costs and

Expenses

   

Other

   

Reductions

   

Balance at End

of Period

 
                                         

DEFERRED INCOME TAX ASSET VALUATION ALLOWANCE:

                                       
                                         

52 weeks ended February 26, 2017

  $ 11,115,000     $ -     $ -     $ (544,000 )   $ 10,571,000  

52 weeks ended February 28, 2016

  $ 11,887,000     $ 29,100     $ -     $ (801,100 )   $ 11,115,000  

52 weeks ended March 1, 2015

  $ 11,941,000     $ 123,000     $ -     $ (177,000 )   $ 11,887,000  

 

                   

Column D

         

Column A

 

Column B

   

Column C

   

Other

   

Column E

 
                                         

Description

 

Balance at

Beginning of

Period

   

Charged to

Cost and

Expenses

   

Accounts

Written Off (A)

   

Translation

Adjustment

   

Balance at End

of Period

 
                                         

ALLOWANCE FOR DOUBTFUL ACCOUNTS:

                                       
                                         

52 weeks ended February 26, 2017

  $ 324,000     $ (27,000 )   $ (3,000 )   $ -     $ 294,000  

52 weeks ended February 28, 2016

  $ 396,000     $ (2,000 )   $ (70,000 )   $ -     $ 324,000  

52 weeks ended March 1, 2015

  $ 416,000     $ (5,000 )   $ (15,000 )   $ -     $ 396,000  

 

(A) Uncollectible amounts, net of recoveries

 

 
74

 

 

EXHIBIT INDEX

 

 

Exhibit

Numbers

 

Description

       
 

3.1

 

Restated Certificate of Incorporation, dated March 28, 1989, filed with the Secretary of State of the State of New York on April 10, 1989, as amended by Certificate of Amendment of the Certificate of Incorporation, increasing the number of authorized shares of Common stock from 15,000,000 to 30,000,000 shares, dated July 12, 1995, filed with the Secretary of State of the State of New York on July 17, 1995, and by Certificate of Amendment of the Certificate of Incorporation, amending certain provisions relating to the rights, preferences and limitations of the shares of a series of Preferred Stock, dated August 7, 1995, filed with the Secretary of State of the State of New York on August 16, 1995 (Reference is made to Exhibit 3.01 of the Company's Annual Report on Form 10-K for the fiscal year ended March 3, 2002, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

3.2

 

Certificate of Amendment of the Certificate of Incorporation, increasing the number of authorized shares of Common Stock from 30,000,000 to 60,000,000 shares, dated October 10, 2000, filed with the Secretary of State of the State of New York on October 11, 2000 (Reference is made to Exhibit 3.02 of the Company’s Annual Report on Form 10-K for the fiscal year ended March 2, 2003, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

3.3

 

By-Laws, amended and restated as of October 18, 2016 (Reference is made to Exhibit 3.1 of the Company’s Current Report on Form 8-K dated October 18, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.1

 

Lease dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real property located at 1100 East Kimberly Avenue, Anaheim, California and letter dated December 29, 1994 from Nelco Products, Inc. to James Emmi exercising its option to extend such Lease (Reference is made to Exhibit 10.01 of the Company's Annual Report on Form 10-K for the fiscal year ended March 3, 2002, Commission File No. 1-4415, which is incorporated herein by reference)

       
 

10.2

 

Lease dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real property located at 1107 East Kimberly Avenue, Anaheim, California and letter dated December 29, 1994 from Nelco Products, Inc. to James Emmi exercising its option to extend such Lease (Reference is made to Exhibit 10.02 of the Company's Annual Report on Form 10-K for the fiscal year ended March 3, 2002, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.2(a)

 

Addendum dated June 12, 2000 to Lease dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real property located at 1100 East Kimberly Avenue, Anaheim, California (see Exhibits 10.1 and 10.2 hereto) (Reference is made to Exhibit 10.2(a) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

 

 
75

 

 

 

Exhibit

Numbers

  Description
       
 

10.2(b)

 

Letter dated December 30, 2009 from Nelco Products, Inc. to James Emmi of Kimberly Development Co. exercising options to extend two Leases dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real properties located at 1100 and 1107 East Kimberly Avenue, Anaheim, California (see Exhibits 10.1 and 10.2 hereto) (Reference is made to Exhibit 10.2(b) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.2(c)

 

Letter dated July 14, 2010 from Kimberly Development Corp. to Nelco Products, Inc. granting two additional options to extend two Leases dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real properties located at 1100 and 1107 East Kimberly Avenue, Anaheim, California (see Exhibits 10.1 and 10.2 hereto) (Reference is made to Exhibit 10.2(c) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

       
  10.2(d)   Letter dated February 10, 2015 from Nelco Products, Inc. to James Emmi of Kimberly Development Co. exercising options to extend two Leases dated December 12, 1989 between Nelco Products, Inc. and James Emmi regarding real properties located at 1100 and 1107 East Kimberly Avenue, Anaheim, California (see Exhibits 10.1 and 10.2 hereto) (Reference is made to Exhibit 10.2(d) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)
       
 

10.3

 

Lease Agreement dated August 16, 2003, between Nelco Products, Inc. and TCLW/Fullerton regarding real property located at 1411 E. Orangethorpe Avenue, Fullerton, California (Reference is made to Exhibit 10.3 of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference)

       
  10.3(a)   Standard Lease Addendum dated April 22, 2015 between Nelco Products, Inc. and TCLW/Fullerton granting extension of Lease Agreement dated August 16, 2003 (see Exhibit 10.3 hereto) between Nelco Products, Inc. and TCLW/Fullerton regarding real property located at 14211 E. Orangethorpe Avenue, Fullerton, California (Reference is made to Exhibit 10.3(a) of the Company's Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference)

 

 
76

 

 

 

Exhibit

Numbers

  Description
       
 

10.3(b)

 

First Amendment to Lease dated May 5, 2015 to Lease Agreement dated August 16, 2003 (see Exhibit 10.3 hereto) between Nelco Products, Inc. and TCLW/Fullerton regarding real property located at 1411 E. Orangethorpe Avenue, Fullerton, California (Reference is made to Exhibit 10.3(b) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference)

       
 

10.4

  Lease Agreement dated May 26, 1982 between Nelco Products Pte. Ltd. (lease was originally entered into by Kiln Technique (Private) Limited, which subsequently assigned this lease to Nelco Products Pte. Ltd.) and the Jurong Town Corporation regarding real property located at 4 Gul Crescent, Jurong, Singapore (Reference is made to Exhibit 10.04 of the Company's Annual Report on Form 10-K for the fiscal year ended March 3, 2002, Commission File No. 1-4415, which is incorporated herein by reference.)
       
 

10.4(a)

 

Deed of Assignment, dated April 17, 1986 between Nelco Products Pte. Ltd., Kiln Technique (Private) Limited and Paul Ma, Richard Law, and Michael Ng, all of Peat Marwick & Co., of the Lease Agreement dated May 26, 1982 (see Exhibit 10.4 hereto) between Kiln Technique (Private) Limited and the Jurong Town Corporation regarding real property located at 4 Gul Crescent, Jurong, Singapore (Reference is made to Exhibit 10.04(a) of the Company's Annual Report on Form 10-K for the fiscal year ended March 3, 2002, Commission File No. 1-4415, which is incorporated herein by reference.)

       
  10.4(b)   Offer of Further Term of Lease dated March 23, 2011 between Nelco Products Pte. Ltd. and the Jurong Town Corporation and amendment dated March 24, 2011 offering extension of the Lease dated May 26, 1982 between Nelco Products Pte. Ltd. (lease was originally entered into by Kiln Tech-nique (Private) Limited, which subsequently assigned this lease to Nelco Products Pte. Ltd.) and the Jurong Town Corporation (see Exhibit 10.4 hereto) regarding real property located at 4 Gul Crescent, Jurong, Singapore (Reference is made to Exhibit 10.4(b) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference)
       
 

10.5

 

Lease dated December 12, 1990 between Neltec, Inc. and NZ Properties, Inc. regarding real property located at 1420 W. 12th Place, Tempe, Arizona. (Reference is made to Exhibit 10.13 of the Company's Annual Report on Form 10-K for the fiscal year ended March 2, 1997, Commission File No. 1-4415, which is incorporated herein by reference.)

 

 
77

 

 

 

Exhibit

Numbers

  Description
       
 

10.5(a)

 

Letter dated January 8, 1996 from Neltec, Inc. to NZ Properties, Inc. exercising its option to extend the Lease dated December 12, 1990 (see Exhibit 10.5 hereto) between Neltec, Inc. and NZ Properties, Inc. regarding real property located at 1420 W. 12th Place, Tempe, Arizona. (Reference is made to Exhibit 10.13(a) of the Company's Annual Report on Form 10-K for the fiscal year ended March 2, 1997, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.5(b)

 

Letter dated January 25, 2001 from Neltec, Inc. to NZ Properties, Inc. exercising its option to extend the Lease dated December 12, 1990 (see Exhibit 10.5 hereto) between Neltec, Inc. and NZ Properties, Inc. regarding real estate property located at 1420 W. 12th Place, Tempe, Arizona (Reference is made to Exhibit 10.7(b) of the Company’s Annual Report on Form l0-K for the fiscal year ended February 26, 2006, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.5(c)

 

Letter dated February 14, 2006 from Neltec, Inc. to REB Ltd. Properties, Inc. exercising its option to extend the Lease dated December 12, 1990 (see Exhibit 10.5 hereto) between Neltec, Inc. and NZ Properties, Inc. regarding real property located at 1420 W. 12th Place, Tempe, Arizona (Reference is made to Exhibit 10.7(c) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 26, 2006, Commission File No. 1-4415, which is incorporated herein by reference.)

       
  10.5(d)  

Addendum to Lease, dated February 28, 2011 between Neltec, Inc. and NZ Properties, Inc. granting a five year extension and options for an additional three five year extensions of the Lease dated December 12, 1990 (see Exhibit 10.5 hereto) between Neltec, Inc. and NZ Properties, Inc. regarding real property located at 1420 W. 12th Place, Tempe, Arizona (Reference is made to Exhibit 10.5(d) of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.6

 

Airport Ground Lease Agreement, dated October 15, 2007 between Park Aerospace Materials, Corp. and The Board of Commissioners of Harvey County, Kansas and the City of Newton, Kansas regarding real property located at the Newton City/County Airport (Reference is made to Exhibit 10.6 of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference)

 

 
78

 

 

 

Exhibit

Numbers

  Description
       
  10.7   2002 Stock Option Plan of the Company (Reference is made to Exhibit 10.01 of the Company's Quarterly Report on Form 10-Q for the fiscal quarter ended September 1, 2002, Commission File No. 1-4415, which is incorporated herein by reference. This exhibit is a management contract or compensatory plan or arrangement.)
       
 

10.8

 

Forms of Incentive Stock Option Contract for employees, Non-Qualified Stock Option Contract for employees and Non-Qualified Stock Option Contract for directors under the 2002 Stock Option Plan of the Company (Reference is made to Exhibit 10.10 of the Company’s Annual Report on Form 10-K for the fiscal year ended February 27, 2005, Commission File No.1-4415, which is incorporated herein by reference.)

       
 

10.9

 

Credit Agreement by and among Park Electrochemical Corp., as Borrower, the Guarantors party thereto, and HSBC Bank USA, National Association, as Lender, dated as of January 15, 2016 and effective as of January 26, 2016, Amendment No. 1 to Credit Agreement dated as of March 11, 2016 and Amendment No. 2 to Credit Agreement dated as of April 5, 2016 (Reference is made to Exhibit 10.9 of the Company’s Annual Report on Form 10-K for the fiscal year ended February 28, 2016, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

10.9(a)

 

Amendment No. 3 to Credit Agreement dated as of January 5, 2017 and Amendment No. 4 to Credit Agreement dated as of April 21, 2017

 

 

14.1

 

 

Code of Ethics for Chief Executive Officer and Senior Financial Officers adopted on May 6, 2004 (Reference is made to Exhibit 14.1 of the Company’s Annual Report on Form 10-K for the fiscal year ended February 29, 2004, Commission File No. 1-4415, which is incorporated herein by reference.)

       
 

21.1

 

Subsidiaries of the Company

       
 

23.1

 

Consent of Independent Registered Public Accounting Firm

       
 

31.1

 

Certification of principal executive officer pursuant to Exchange Act Rule 13a-14(a) or 15d-14(a)

       
 

31.2

 

Certification of principal financial officer pursuant to Exchange Act Rule 13a-14(a) or 15d-14(a)

       
 

32.1

 

Certification of principal executive officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes–Oxley Act of 2002

       
 

32.2

 

Certification of principal financial officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

 
79

 

 

 

Exhibit

Numbers

Description
     
 

101

The following materials from the Company’s Annual Report on Form 10-K for the year ended February 26, 2017, formatted in XBRL (eXtensible Business Reporting Language): (i) Consolidated Balance Sheets at February 26, 2017 and February 28, 2016, (ii) Consolidated Statements of Operations for the years ended February 26, 2017, February 28, 2016 and March 1, 2015 (iii) Consolidated Statements of Comprehensive Earnings (Loss) for the years ended February 26, 2017, February 28, 2016 and March 1, 2015 (iv) Consolidated Statements of Shareholders’ Equity for the years ended February 26, 2017, February 28, 2016 and March 1, 2015 and (iv) Consolidated Statements of Cash Flows for the years ended February 26, 2017, February 28, 2016 and March 1, 2015 .*+

     
    * Filed electronically herewith.
     
    + Pursuant to Rule 406T of Regulation S-T, the Interactive Data Files on Exhibit 101 hereto are deemed not filed or part of a registration statement or prospectus for purposes of Section 11 or 12 of the Securities Act of 1933, as amended, are deemed not filed for purposes of Section 18 of the Securities and Exchange Act of 1934, as amended, and otherwise are not subject to liability under those sections.

 

 

80