Attached files
file | filename |
---|---|
EX-32.A - EXHIBIT 32.A Q1 2017 - CORE MOLDING TECHNOLOGIES INC | ex32a33117.htm |
EX-32.B - EXHIBIT 32.B Q1 2017 - CORE MOLDING TECHNOLOGIES INC | ex32b33117.htm |
EX-31.B - EXHIBIT 31.B Q1 2017 - CORE MOLDING TECHNOLOGIES INC | ex31b33117.htm |
EX-31.A - EXHIBIT 31.A Q1 2017 - CORE MOLDING TECHNOLOGIES INC | ex31a33117.htm |
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
þ | QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
For the quarterly period ended March 31, 2017
OR
o | TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934 |
for the transition period from To
Commission File Number 001-12505
CORE MOLDING TECHNOLOGIES, INC.
___________________________________________________________________________________
(Exact name of registrant as specified in its charter)
Delaware | 31-1481870 | |
(State or other jurisdiction incorporation or organization) | (I.R.S. Employer Identification No.) |
800 Manor Park Drive, Columbus, Ohio | 43228-0183 | |
(Address of principal executive office) | (Zip Code) |
Registrant’s telephone number, including area code (614) 870-5000
N/A
_______________________________________________________________
Former name, former address and former fiscal year, if changed since last report.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act (Check one).
Large accelerated filer o | Accelerated filer þ | Non-accelerated filer o | Smaller reporting company o | |||
(Do not check if a smaller reporting company) | Emerging growth company o |
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. o
Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes o No þ
As of May 4, 2017, the latest practicable date, 7,792,390 shares of the registrant’s common stock were issued and outstanding.
Table of Contents
2
Item 1. Financial Statements
Part I — Financial Information
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Balance Sheets
March 31, 2017 | December 31, 2016 | ||||||
(Unaudited) | |||||||
Assets: | |||||||
Current assets: | |||||||
Cash and cash equivalents | $ | 30,591,000 | $ | 28,285,000 | |||
Accounts receivable (less allowance for doubtful accounts: $0 at March 31, 2017 and December 31, 2016) | 22,121,000 | 19,551,000 | |||||
Inventories: | |||||||
Finished goods | 2,018,000 | 1,876,000 | |||||
Work in process | 1,442,000 | 1,401,000 | |||||
Raw materials and components | 8,225,000 | 7,635,000 | |||||
Total inventories, net | 11,685,000 | 10,912,000 | |||||
Foreign sales tax receivable | 262,000 | 228,000 | |||||
Prepaid expenses and other current assets | 1,234,000 | 912,000 | |||||
Total current assets | 65,893,000 | 59,888,000 | |||||
Property, plant and equipment — net | 69,798,000 | 70,601,000 | |||||
Goodwill | 2,403,000 | 2,403,000 | |||||
Intangibles, net | 550,000 | 563,000 | |||||
Total Assets | $ | 138,644,000 | $ | 133,455,000 | |||
Liabilities and Stockholders’ Equity: | |||||||
Current liabilities: | |||||||
Current portion of long-term debt | 3,000,000 | 3,000,000 | |||||
Accounts payable | 10,427,000 | 8,534,000 | |||||
Tooling in progress | 3,264,000 | 1,084,000 | |||||
Current portion of post retirement benefits liability | 1,018,000 | 1,018,000 | |||||
Accrued liabilities: | |||||||
Compensation and related benefits | 4,124,000 | 5,004,000 | |||||
Taxes | 2,017,000 | 1,038,000 | |||||
Other | 1,098,000 | 1,620,000 | |||||
Total current liabilities | 24,948,000 | 21,298,000 | |||||
Long-term debt | 6,000,000 | 6,750,000 | |||||
Deferred tax liability | 992,000 | 992,000 | |||||
Post retirement benefits liability | 7,634,000 | 7,649,000 | |||||
Total Liabilities | 39,574,000 | 36,689,000 | |||||
Commitments and Contingencies | — | — | |||||
Stockholders’ Equity: | |||||||
Preferred stock — $0.01 par value, authorized shares — 10,000,000; no shares outstanding at March 31, 2017 and December 31, 2016 | — | — | |||||
Common stock — $0.01 par value, authorized shares – 20,000,000; outstanding shares: 7,658,454 at March 31, 2017 and 7,635,093 at December 31, 2016 | 76,000 | 76,000 | |||||
Paid-in capital | 30,399,000 | 30,134,000 | |||||
Accumulated other comprehensive income, net of income taxes | 2,791,000 | 2,414,000 | |||||
Treasury stock - at cost, 3,755,192 at March 31, 2017 and 3,753,595 at December 31, 2016 | (27,807,000 | ) | (27,781,000 | ) | |||
Retained earnings | 93,611,000 | 91,923,000 | |||||
Total Stockholders’ Equity | 99,070,000 | 96,766,000 | |||||
Total Liabilities and Stockholders’ Equity | $ | 138,644,000 | $ | 133,455,000 |
See notes to unaudited consolidated financial statements.
3
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Income
(Unaudited)
Three Months Ended | |||||||
March 31, | |||||||
2017 | 2016 | ||||||
Net sales: | |||||||
Products | $ | 36,336,000 | $ | 42,530,000 | |||
Tooling | 410,000 | 2,938,000 | |||||
Total net sales | 36,746,000 | 45,468,000 | |||||
Total cost of sales | 30,255,000 | 36,605,000 | |||||
Gross margin | 6,491,000 | 8,863,000 | |||||
Total selling, general and administrative expense | 3,925,000 | 4,421,000 | |||||
Operating Income | 2,566,000 | 4,442,000 | |||||
Interest expense | 64,000 | 92,000 | |||||
Income before taxes | 2,502,000 | 4,350,000 | |||||
Income tax expense | 814,000 | 1,460,000 | |||||
Net income | $ | 1,688,000 | $ | 2,890,000 | |||
Net income per common share: | |||||||
Basic | $ | 0.22 | $ | 0.38 | |||
Diluted | $ | 0.22 | $ | 0.38 | |||
Weighted average shares outstanding: | |||||||
Basic | 7,652,000 | 7,597,000 | |||||
Diluted | 7,708,000 | 7,607,000 |
See notes to unaudited consolidated financial statements.
4
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Comprehensive Income
(Unaudited)
Three Months Ended | ||||||||
March 31, | ||||||||
2017 | 2016 | |||||||
Net income | $ | 1,688,000 | $ | 2,890,000 | ||||
Other comprehensive income: | ||||||||
Foreign currency hedge: | ||||||||
Unrealized foreign currency hedge gain | 662,000 | — | ||||||
Income tax expense | (225,000 | ) | — | |||||
Interest rate swaps: | ||||||||
Adjustment for amortization of losses included in net income | — | 5,000 | ||||||
Income tax expense | — | (2,000 | ) | |||||
Post retirement benefit plan adjustments: | ||||||||
Net actuarial loss | 37,000 | 39,000 | ||||||
Prior service costs | (124,000 | ) | (124,000 | ) | ||||
Income tax benefit | 27,000 | 26,000 | ||||||
Comprehensive income | $ | 2,065,000 | $ | 2,834,000 |
See notes to unaudited consolidated financial statements.
5
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statement of Stockholders’ Equity
(Unaudited)
Common Stock Outstanding | Paid-In Capital | Accumulated Other Comprehensive Income | Treasury Stock | Retained Earnings | Total Stockholders’ Equity | |||||||||||||||||||||
Shares | Amount | |||||||||||||||||||||||||
Balance at December 31, 2016 | 7,635,093 | $ | 76,000 | $ | 30,134,000 | $ | 2,414,000 | $ | (27,781,000 | ) | $ | 91,923,000 | $ | 96,766,000 | ||||||||||||
Net income | 1,688,000 | 1,688,000 | ||||||||||||||||||||||||
Change in post retirement benefits, net of tax benefit of $27,000 | (60,000 | ) | (60,000 | ) | ||||||||||||||||||||||
Unrealized foreign currency hedge gain, net of tax of $225,000 | 437,000 | 437,000 | ||||||||||||||||||||||||
Purchase of treasury stock | (1,597 | ) | (26,000 | ) | (26,000 | ) | ||||||||||||||||||||
Restricted stock vested | 24,958 | — | ||||||||||||||||||||||||
Share-based compensation | 265,000 | 265,000 | ||||||||||||||||||||||||
Balance at March 31, 2017 | 7,658,454 | $ | 76,000 | $ | 30,399,000 | $ | 2,791,000 | $ | (27,807,000 | ) | $ | 93,611,000 | $ | 99,070,000 |
See notes to unaudited consolidated financial statements.
6
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(Unaudited)
Three Months Ended | |||||||
March 31, | |||||||
2017 | 2016 | ||||||
Cash flows from operating activities: | |||||||
Net income | $ | 1,688,000 | $ | 2,890,000 | |||
Adjustments to reconcile net income to net cash provided by operating activities: | |||||||
Depreciation and amortization | 1,605,000 | 1,641,000 | |||||
Interest rate swaps — mark-to-market and amortization of losses | — | 3,000 | |||||
Share-based compensation | 265,000 | 175,000 | |||||
Loss on foreign currency translation | 15,000 | 86,000 | |||||
Change in operating assets and liabilities: | |||||||
Accounts receivable | (2,570,000 | ) | 4,933,000 | ||||
Inventories | (773,000 | ) | 690,000 | ||||
Prepaid and other assets | 4,000 | 136,000 | |||||
Accounts payable | 1,633,000 | (3,801,000 | ) | ||||
Taxes receivable | — | 670,000 | |||||
Accrued and other liabilities | 1,861,000 | 504,000 | |||||
Post retirement benefits liability | (102,000 | ) | (69,000 | ) | |||
Net cash provided by operating activities | 3,626,000 | 7,858,000 | |||||
Cash flows from investing activities: | |||||||
Purchase of property, plant and equipment | (544,000 | ) | (1,247,000 | ) | |||
Net cash used in investing activities | (544,000 | ) | (1,247,000 | ) | |||
Cash flows from financing activities: | |||||||
Payment of principal on term loan | (750,000 | ) | (750,000 | ) | |||
Payment of principal on capex loan | — | (428,000 | ) | ||||
Payments related to the purchase of treasury stock | (26,000 | ) | — | ||||
Net cash used in financing activities | (776,000 | ) | (1,178,000 | ) | |||
Net change in cash and cash equivalents | 2,306,000 | 5,433,000 | |||||
Cash and cash equivalents at beginning of period | 28,285,000 | 8,943,000 | |||||
Cash and cash equivalents at end of period | $ | 30,591,000 | $ | 14,376,000 | |||
Cash paid for: | |||||||
Interest (net of amounts capitalized) | $ | 64,000 | $ | 85,000 | |||
Income taxes | $ | — | $ | 4,000 | |||
Non Cash: | |||||||
Fixed asset purchases in accounts payable | $ | 561,000 | $ | 154,000 |
See notes to unaudited consolidated financial statements.
7
Core Molding Technologies, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
(Unaudited)
1. Basis of Presentation
The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (“Core Molding Technologies” or the “Company”) at March 31, 2017, and the results of operations and cash flows for the three months ended March 31, 2017. The “Notes to Consolidated Financial Statements” contained in the Company's 2016 Annual Report to Shareholders, should be read in conjunction with these consolidated financial statements.
Core Molding Technologies and its subsidiaries operate in the plastics market in a family of products known as “reinforced plastics.” Reinforced plastics are combinations of resins and reinforcing fibers (typically glass or carbon) that are molded to shape. Core Molding Technologies is a manufacturer of sheet molding compound ("SMC") and molder of fiberglass reinforced plastics. The Company specializes in large-format moldings and offers a wide range of fiberglass processes, including compression molding of SMC, glass mat thermoplastics, bulk molding compounds and direct long-fiber thermoplastics, spray-up, hand-lay-up, and resin transfer molding. Additionally, the Company offers reaction injection molding, utilizing dicyclopentadiene technology. Core Molding Technologies maintains five production facilities in Columbus, Ohio; Batavia, Ohio; Gaffney, South Carolina; Winona, Minnesota and Matamoros, Mexico.
The Company operates in one business segment as a manufacturer of SMC and molder of fiberglass reinforced plastics. The Company produces and sells SMC and molded products for varied markets, including light, medium and heavy-duty trucks, automobiles and automotive aftermarket, marine, construction and other commercial products.
2. Net Income per Common Share
Basic net income per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of restricted stock under the treasury stock method.
The computation of basic and diluted net income per common share is as follows:
Three Months Ended | |||||||
March 31, | |||||||
2017 | 2016 | ||||||
Net income | $ | 1,688,000 | $ | 2,890,000 | |||
Weighted average common shares outstanding — basic | 7,652,000 | 7,597,000 | |||||
Effect of dilutive securities | 56,000 | 10,000 | |||||
Weighted average common and potentially issuable common shares outstanding — diluted | 7,708,000 | 7,607,000 | |||||
Basic net income per common share | $ | 0.22 | $ | 0.38 | |||
Diluted net income per common share | $ | 0.22 | $ | 0.38 |
8
3. Major Customers
Core Molding Technologies has five major customers, Navistar, Inc. (“Navistar”), Volvo Group North America, LLC (“Volvo”), PACCAR, Inc. (“PACCAR”), Yamaha Motor Manufacturing Corporation (“Yamaha”) and Bombardier Recreational Products (“BRP”). Major customers are defined as customers whose sales individually consist of more than ten percent of total sales during any reporting period in the current year. The following table presents sales revenue for the above-mentioned customers for the three months ended March 31, 2017 and 2016:
Three Months Ended | |||||||
March 31, | |||||||
2017 | 2016 | ||||||
Navistar product sales | $ | 9,257,000 | $ | 10,885,000 | |||
Navistar tooling sales | 18,000 | 5,000 | |||||
Total Navistar sales | 9,275,000 | 10,890,000 | |||||
Volvo product sales | 5,235,000 | 8,854,000 | |||||
Volvo tooling sales | 31,000 | 422,000 | |||||
Total Volvo sales | 5,266,000 | 9,276,000 | |||||
PACCAR product sales | 5,462,000 | 6,152,000 | |||||
PACCAR tooling sales | 190,000 | 2,221,000 | |||||
Total PACCAR sales | 5,652,000 | 8,373,000 | |||||
Yamaha product sales | 5,312,000 | 5,446,000 | |||||
Yamaha tooling sales | — | — | |||||
Total Yamaha sales | 5,312,000 | 5,446,000 | |||||
BRP product sales | 4,711,000 | 3,949,000 | |||||
BRP tooling sales | 23,000 | — | |||||
Total BRP sales | 4,734,000 | 3,949,000 | |||||
Other product sales | 6,359,000 | 7,244,000 | |||||
Other tooling sales | 148,000 | 290,000 | |||||
Total other sales | 6,507,000 | 7,534,000 | |||||
Total product sales | 36,336,000 | 42,530,000 | |||||
Total tooling sales | 410,000 | 2,938,000 | |||||
Total sales | $ | 36,746,000 | $ | 45,468,000 |
4. Property, Plant & Equipment
Property, plant and equipment consisted of the following for the periods specified:
March 31, 2017 | December 31, 2016 | ||||||
Property, plant and equipment | $ | 141,447,000 | $ | 140,658,000 | |||
Accumulated depreciation | (71,649,000 | ) | (70,057,000 | ) | |||
Property, plant and equipment — net | $ | 69,798,000 | $ | 70,601,000 |
Property, plant, and equipment are recorded at cost, unless obtained through acquisition, then assets are recorded at estimated fair value at the date of acquisition. Depreciation is provided on a straight-line method over the estimated useful lives of the assets. The carrying amount of long-lived assets is evaluated annually to determine if an adjustment to the depreciation period or to the unamortized balance is warranted. Amounts invested in capital additions in progress were $2,314,000 and $1,607,000 at March 31, 2017 and December 31, 2016, respectively. At March 31, 2017 and December 31, 2016, purchase commitments for capital expenditures in progress were $645,000 and $616,000, respectively.
9
5. Goodwill and Intangibles
There was no goodwill activity for the three months ended March 31, 2017.
Intangible assets at March 31, 2017 were comprised of the following:
Definite-lived Intangible Assets | Amortization Period | Gross Carrying Amount | Accumulated Amortization | Net Carrying Amount | ||||||||||
Trade Name | 25 years | $ | 250,000 | $ | (20,000 | ) | $ | 230,000 | ||||||
Customer Relationships | 10 years | 400,000 | (80,000 | ) | 320,000 | |||||||||
$ | 650,000 | $ | (100,000 | ) | $ | 550,000 |
The aggregate intangible asset amortization expense was $13,000 for each of the three months ended March 31, 2017 and 2016.
6. Post Retirement Benefits
The components of expense for Core Molding Technologies’ post-retirement benefit plans for the three months ended March 31, 2017 and 2016 are as follows:
Three Months Ended | |||||||
March 31, | |||||||
2017 | 2016 | ||||||
Pension expense: | |||||||
Multi-employer plan | $ | 157,000 | $ | 187,000 | |||
Defined contribution plan | 207,000 | 218,000 | |||||
Total pension expense | 364,000 | 405,000 | |||||
Health and life insurance: | |||||||
Interest cost | 75,000 | 81,000 | |||||
Amortization of prior service costs | (124,000 | ) | (124,000 | ) | |||
Amortization of net loss | 37,000 | 39,000 | |||||
Net periodic benefit cost | (12,000 | ) | (4,000 | ) | |||
Total post retirement benefits expense | $ | 352,000 | $ | 401,000 |
The Company made payments of $216,000 to pension plans and $90,000 for post-retirement healthcare and life insurance during the three months ended March 31, 2017. For the remainder of 2017, the Company expects to make approximately $1,170,000 of pension plan payments, of which $629,000 was accrued at March 31, 2017. The Company also expects to make approximately $928,000 of post-retirement healthcare and life insurance payments for the remainder of 2017, all of which were accrued at March 31, 2017.
7. Debt
Debt consists of the following:
March 31, 2017 | December 31, 2016 | ||||||
Term loan payable to Key Bank, interest at a variable rate (2.80% at March 31, 2017 and 2.55% at December 31, 2016) with monthly payments of interest and principal through March 2020. | $ | 9,000,000 | $ | 9,750,000 | |||
Revolving line of credit | — | — | |||||
Total | 9,000,000 | 9,750,000 | |||||
Less current portion | (3,000,000 | ) | (3,000,000 | ) | |||
Long-term debt | $ | 6,000,000 | $ | 6,750,000 |
10
Credit Agreement
On December 9, 2008, the Company and its wholly owned subsidiary, Corecomposites de Mexico, S. de R.L. de C.V., entered into a credit agreement, as amended from time to time (the "Credit Agreement"), with a lender to provide various financing facilities.
Under this Credit Agreement, as amended most recently with the eleventh amendment on June 21, 2016, the Company received certain loans, subject to the terms and conditions stated in the agreement, which included (1) a $12,000,000 Capex loan; (2) an $18,000,000 variable rate revolving line of credit with a commitment date extending through May 31, 2018; (3) a term loan in an original amount of $15,500,000 (the "Term Loan"); and (4) a Letter of Credit Commitment of up to $250,000, of which $155,000 has been issued. The Credit Agreement is secured by a guarantee of each U.S. subsidiary of the Company, and by a lien on substantially all of the present and future assets of the Company and its U.S. subsidiaries, except that only 65% of the stock issued by Corecomposites de Mexico, S. de R.L. de C.V. has been pledged.
Bank Covenants
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of March 31, 2017, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above.
8. Income Taxes
The Company’s consolidated balance sheets include a net non-current deferred tax liability of $992,000 at March 31, 2017 and December 31, 2016. The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income.
Income tax expense for the three months ended March 31, 2017 is estimated to be $814,000, or approximately 33% of income before income taxes. Income tax expense for the three months ended March 31, 2016 was estimated to be $1,460,000, or approximately 34% of income before income taxes.
As of March 31, 2017 and December 31, 2016, the Company had no liability for unrecognized tax benefits. The Company does not anticipate that unrecognized tax benefits will significantly change within the next twelve months.
The Company files income tax returns in the U.S., Mexico and various state jurisdictions. The Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for years prior to 2013, and is no longer subject to Mexican income tax examinations by Mexican authorities for years prior to 2012.
9. Share Based Compensation
The Company has a Long Term Equity Incentive Plan (the “2006 Plan”), as approved by the Company’s stockholders in May 2006 and as amended in May 2015. The 2006 Plan allows for grants to directors and employees of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, performance shares, performance units and other incentive awards (“Stock Awards”) up to an aggregate of 3,000,000 awards, each representing a right to buy a share of Core Molding Technologies common stock. Stock Awards can be granted under the 2006 Plan through the earlier of December 31, 2025, or the date the maximum number of available awards under the 2006 Plan have been granted.
Restricted Stock
The Company grants shares of its common stock to certain directors, officers, and key managers in the form of unvested stock (“Restricted Stock”). These awards are recorded at the market value of Core Molding Technologies’ common stock on the date of issuance, net of estimated forfeitures, and amortized ratably as compensation expense over the applicable vesting period, which is typically three years. The Company has applied forfeiture rates, estimated based on historical experience, of 3.5%-6.5% to the restricted stock fair values. These estimated forfeiture rates are applied to grants based on their remaining vesting term and may be revised in subsequent periods if actual forfeitures differ from these estimates.
11
The following summarizes the status of Restricted Stock and changes during the three months ended March 31, 2017:
Number of Shares | Weighted Average Grant Date Fair Value | |||||
Unvested balance at December 31, 2016 | 158,261 | $ | 14.55 | |||
Granted | 631 | 15.85 | ||||
Vested | (24,958 | ) | 13.26 | |||
Forfeited | — | — | ||||
Unvested balance at March 31, 2017 | 133,934 | $ | 14.75 |
At March 31, 2017 and 2016, there was $1,124,000 and $1,025,000, respectively, of total unrecognized compensation expense, net of estimated forfeitures, related to Restricted Stock granted under the 2006 Plan. That cost is expected to be recognized over the weighted-average period of 1.4 years. Total compensation cost, net of estimated forfeitures, related to restricted stock grants for the three months ended March 31, 2017 and 2016 was $265,000 and $175,000, respectively, all of which was recorded to selling, general and administrative expense.
Compensation expense for restricted stock is recorded at the fair value at the time of the grant, net of estimated forfeitures, over the vesting period of the restricted stock grant. The Company does not receive a tax deduction for restricted stock until the restricted stock vests. The tax deduction for restricted stock is based on the fair market value as of the vesting date. Tax benefits received for vested restricted stock in excess of the fair market value as of the grant date were $26,000 and zero for the three months ended March 31, 2017 and 2016, respectively.
During the three months ended March 31, 2017 and 2016, employees surrendered 1,597 and zero shares, respectively, of the Company's common stock to satisfy income tax withholding obligations in connection with the vesting of restricted stock.
10. Fair Value of Financial Instruments
Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in a transaction between market participants as of the measurement date. Fair value is measured using the fair value hierarchy and related valuation methodologies as defined in the authoritative literature. This guidance provides a fair value framework that requires the categorization of assets and liabilities into three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment.
The three levels are defined as follows:
Level 1 - | Quoted prices in active markets for identical assets and liabilities. |
Level 2 - | Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active and model-derived valuations, in which all significant inputs are observable in active markets. |
Level 3 - | Significant unobservable inputs reflecting management's own assumptions about the inputs used in pricing the asset or liability. |
The Company’s financial instruments consist of cash and cash equivalents, accounts receivable, accounts payable, debt and foreign currency derivatives. Cash and cash equivalents, accounts receivable and accounts payable carrying values as of March 31, 2017 and December 31, 2016 approximate fair value due to the short-term maturities of these financial instruments. The carrying amounts of long-term debt and the revolving line of credit approximate fair value as of March 31, 2017 and December 31, 2016 due to the short term nature of the underlying variable rate LIBOR agreements. The Company had Level 2 fair value measurements at March 31, 2017 and December 31, 2016 relating to the Company’s foreign currency derivatives.
Derivative and hedging activities
The Company conducts business in Mexico and pays certain expenses in Mexican Pesos. The Company is exposed to foreign currency exchange risk between the U.S. Dollar and the Mexican Peso, which could impact the Company’s operating income and cash flows. To mitigate risk associated with foreign currency exchange, the Company entered into forward contracts to exchange a fixed amount of U.S. Dollars for a fixed amount of Mexican Pesos, which will be used to fund future Peso cash flows. At inception, all forward contracts are formally documented as cash flow hedges and are measured at fair value each reporting period. Derivatives are formally assessed both at inception and at least quarterly thereafter, to ensure that derivatives used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged item. If it is determined that a derivative ceases
12
to be a highly effective hedge, or if the anticipated transaction is no longer probable of occurring, hedge accounting is discontinued, and any future mark-to-market adjustments are recognized in earnings. The effective portion of gain or loss is reported in other comprehensive income and the ineffective portion is reported in earnings. The impacts of these contracts were largely offset by gains and losses resulting from the impact of changes in exchange rates on transactions denominated in the Mexican Peso. As of March 31, 2017, the Company had no ineffective portion related to the cash flow hedges.
Financial statements impacts
The following tables detail amounts related to our derivatives designated as hedging instruments:
Fair Values of Derivatives Instruments | |||||||||||
March 31, 2017 | |||||||||||
Asset Derivatives | Liability Derivatives | ||||||||||
Balance Sheet Location | Fair Value | Balance Sheet Location | Fair Value | ||||||||
Foreign exchange contracts | Prepaid expense other current assets | $ | 359,000 | Accrued liabilities other | $ | — | |||||
Notional contract values | $ | 6,181,000 | $ | — | |||||||
December 31, 2016 | |||||||||||
Asset Derivatives | Liability Derivatives | ||||||||||
Balance Sheet Location | Fair Value | Balance Sheet Location | Fair Value | ||||||||
Foreign exchange contracts | Prepaid expense other current assets | $ | — | Accrued liabilities other | $ | 303,000 | |||||
Notional contract values | $ | — | $ | 6,502,000 |
The following tables summarize the amount of unrealized / realized gain and loss recognized in Accumulated Comprehensive Income (AOCI) for the three months ended March 31, 2017 and 2016:
Derivatives in subtopic 815-20 Cash Flow Hedging Relationship | Amount of Unrealized Gain or (Loss) Recognized in Accumulated other Comprehensive Income on Derivative | Location of Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income(A) | Amount of Realized Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income | ||||||||||||||
2017 | 2016 | 2017 | 2016 | ||||||||||||||
Foreign exchange contracts | $ | 642,000 | $ | — | Cost of goods sold | $ | 18,000 | $ | — | ||||||||
Sales, general and administrative expense | $ | 2,000 | $ | — |
(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and sales, general and administrative expense based on the percentage of Mexican Peso spend.
There were no non-recurring fair value measurements for the three months ended March 31, 2017.
13
11. Accumulated Other Comprehensive Income
The following table presents changes in Accumulated Other Comprehensive Income, net of tax, for the three months ended March 31, 2017 and 2016:
2016: | Foreign Currency Derivative Activities(A) | Post Retirement Benefit Plan Items(B) | Accumulated Other Comprehensive Income | ||||||
Balance at December 31, 2015 | $ | — | $ | 2,645,000 | $ | 2,645,000 | |||
Other Comprehensive Income before reclassifications | — | — | — | ||||||
Amounts reclassified from accumulated other comprehensive income | — | (80,000 | ) | (80,000 | ) | ||||
Income tax benefit | — | 24,000 | 24,000 | ||||||
Balance at March 31, 2016 | $ | — | $ | 2,589,000 | $ | 2,589,000 | |||
2017: | |||||||||
Balance at December 31, 2016 | $ | (200,000 | ) | $ | 2,614,000 | $ | 2,414,000 | ||
Other Comprehensive Income before reclassifications | 642,000 | — | 642,000 | ||||||
Amounts reclassified from accumulated other comprehensive income | 20,000 | (87,000 | ) | (67,000 | ) | ||||
Income tax benefit (expense) | (225,000 | ) | 27,000 | (198,000 | ) | ||||
Balance at March 31, 2017 | $ | 237,000 | $ | 2,554,000 | $ | 2,791,000 |
(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and sales, general and administrative expense based on the percentage of Mexican Peso spend. The tax effect of the foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.
(B) The Company has historically disclosed both interest rate swap activity and post-retirement benefit activity, however due to immaterial interest rate swap activity the components have been combined. The effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in total cost of sales on the Consolidated Statements of Income. These Accumulated Other Comprehensive Income components are included in the computation of net periodic benefit cost (see Note 6 "Post Retirement Benefits" for additional details). The tax effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.
14
12. Recent Accounting Pronouncements
In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers (Topic 606), which supersedes the revenue recognition requirements in ASC 605, Revenue Recognition. ASC Topic 606 is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ASC Topic 606 also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. The effective date for ASC Topic 606, as updated by ASU No. 2015-14 in August 2015, has been delayed until the first quarter of fiscal year 2018. ASU 2014-09 will affect the timing of certain revenue related transactions primarily resulting from the earlier recognition of the Company's tooling sales and costs. Upon adoption of ASU 2014-09 tooling sales and costs will be recorded over time on a percentage of completion methodology instead of completed contract methodology. We have not yet determined whether we will adopt the provisions of ASU 2014-09 on a retrospective basis or through a cumulative adjustment to equity. We continue to assess the overall impact the adoption of ASU 2014-09 will have on our consolidated financial statements, and anticipate testing our new controls and processes designed to comply with ASU 2014-09 throughout 2017 to permit adoption by January 1, 2018.
In November 2015, the FASB issued ASU No. 2015-17, Balance Sheet Classification of Deferred Taxes (Topic 740). This update requires all deferred tax assets and liabilities, and any related valuation allowance, to be classified as noncurrent on the balance sheet. The ASU simplifies the current standard, which requires entities to separately present deferred tax assets and liabilities as current and noncurrent in a classified balance sheet. The ASU is effective for annual reporting periods beginning on or after December 15, 2016, and interim periods within those annual periods. Earlier application is permitted for all entities as of the beginning of an interim or annual reporting period. The Company adopted ASU 2015-17 in the first quarter of 2017. The adoption of this ASU did not have a material impact on our consolidated financial statements. The adoption of this ASU resulted in the Company netting its current deferred tax asset with its non-current deferred tax liability resulting in a change in presentation to a net non-current liability of $992,000 at March 31, 2017 and December 31, 2016. The presentation change at December 31, 2016 resulted from netting the Company's current deferred tax asset of $1,381,000 with its non-current deferred tax liability of $2,373,000.
In March 2016, the FASB issued ASU No. 2016-09, Compensation - Stock Compensation (Topic 718) ("ASU 2016-09") as part of the FASB simplification initiative. The new standard provides for changes to accounting for stock compensation including 1) excess tax benefits and tax deficiencies related to share based payment awards will be recognized as income tax expense in the reporting period in which they occur; 2) excess tax benefits will be classified as an operating activity in the statement of cash flow; 3) the option to elect to estimate forfeitures or account for them when they occur; and 4) increases the tax withholding requirement threshold to qualify for equity classification. The ASU is effective for public companies for annual periods, and interim periods within those annual periods, beginning after December 15, 2016 and early adoption is permitted. The Company adopted ASU 2016-09 in the first quarter of 2017. The Company elected to continue to estimate forfeitures based on historical data and recognizes compensation expense, net of forfeitures, over the vesting period of the award. The adoption of this ASU did not have a material impact on our consolidated financial statements.
In January 2017, FASB issued ASU No. 2017-04, Intangible - Goodwill and Other (Topic 350): Simplifying the Test for Goodwill Impairment. The new standard eliminates step 2, which required companies to determine the implied fair value of the reporting unit's goodwill, of the goodwill impairment test. Under this new guidance, companies will perform their annual goodwill impairment test by comparing the reporting unit's carrying value, including goodwill, to the fair value. An impairment charge would be recorded if the carrying value exceeds the reporting unit's fair value. The ASU is effective for public companies for annual periods, and interim periods within those annual periods, beginning after December 15, 2020 and early adoption is permitted. The Company will adopt this standard update as required and does not expect the adoption of this ASU to have a material impact on our consolidated financial statements.
In March 2017, FASB issued ASU No. 2017-07, Compensation - Retirement Benefits (Topic 715): Improving the Presentation of Net Periodic Pension Cost and Net Periodic Postretirement Benefit Cost ("ASU 2017-07"). The new standard provides changes to the presentation of the service cost component outside a subtotal of income from operations. The ASU is effective for public companies for annual periods, and interim periods within those annual periods, beginning after December 15, 2017 and early adoption is permitted. The Company will adopt this standard update as required and does not expect the adoption of this ASU to have a material impact on our consolidated financial statements.
15
Part I — Financial Information
Item 2. | Management’s Discussion and Analysis of Financial Condition and Results of Operations |
This Management's Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control. Words such as “may,” “will,” “could,” “would,” “should,” “anticipate,” “predict,” “potential,” “continue,” “expect,” “intend,” “plans,” “projects,” “believes,” “estimates,” “confident” and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements. Except as required by law, Core Molding Technologies Inc. undertakes no obligation to update these forward looking statements.
Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this report: business conditions in the plastics, transportation, marine and commercial product industries (including slowdown in demand for truck production); federal and state regulations (including engine emission regulations); general economic, social, regulatory (including foreign trade policy) and political environments in the countries in which Core Molding Technologies operates; safety and security conditions in Mexico; dependence upon certain major customers as the primary source of Core Molding Technologies’ sales revenues; efforts of Core Molding Technologies to expand its customer base; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability of raw materials; inflationary pressures; new technologies; regulatory matters; labor relations; the loss or inability of Core Molding Technologies to attract and retain key personnel; the Company's ability to successfully identify, evaluate and manage potential acquisitions and to benefit from and properly integrate any completed acquisitions; federal, state and local environmental laws and regulations; the availability of capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees; risk of cancellation or rescheduling of orders; management’s decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; inadequate insurance coverage to protect against potential hazards; equipment and machinery failure; product liability and warranty claims; and other risks identified from time to time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the 2016 Annual Report on Form 10-K.
Description of the Company
Core Molding Technologies is a manufacturer of sheet molding compound ("SMC") and molder of fiberglass reinforced plastics. The Company specializes in large-format moldings and offers a wide range of fiberglass processes, including compression molding of SMC, glass mat thermoplastics, bulk molding compounds and direct long-fiber thermoplastics (D-LFT); spray-up, hand-lay-up, and resin transfer molding ("RTM"). Additionally, the Company offers reaction injection molding, utilizing dicyclopentadiene technology. Core Molding Technologies serves a wide variety of markets, including medium and heavy-duty truck, marine, automotive, agriculture, construction and other commercial products. Product sales to heavy and medium-duty truck markets accounted for 59% and 65% of the Company’s sales for the three months ended March 31, 2017 and 2016, respectively. The demand for Core Molding Technologies’ products is primarily affected by economic conditions in the United States, Canada, and Mexico. Core Molding Technologies’ manufacturing operations have a significant fixed cost component. Accordingly, during periods of changing demand, the profitability of Core Molding Technologies’ operations may change proportionately more than revenues from operations.
In 1996, Core Molding Technologies acquired substantially all of the assets and assumed certain liabilities of Columbus Plastics, a wholly owned operating unit of Navistar’s truck manufacturing division since its formation in late 1980. Columbus Plastics, located in Columbus, Ohio, was a compounder and compression molder of SMC. In 1998, Core Molding Technologies began operations at its second facility in Gaffney, South Carolina, and in 2001, the Company established a manufacturing presence in Mexico by acquiring certain assets of Airshield Corporation. As a result of this acquisition, Core Molding Technologies expanded its fiberglass molding capabilities to include the spray up, hand-lay-up open mold processes and RTM closed molding. In 2004, the Company acquired substantially all the operating assets of Keystone Restyling Products, Inc., a privately held manufacturer and distributor of fiberglass reinforced products for the automotive-aftermarket industry. In 2005, Core Molding Technologies acquired certain assets of the Cincinnati Fiberglass Division of Diversified Glass, Inc., a Batavia, Ohio-based, privately held manufacturer and distributor of fiberglass reinforced plastic components supplied primarily to the heavy-duty truck market. In
16
2009, the Company completed construction of a production facility in Matamoros, Mexico that replaced its leased facility. Most recently in 2015, the Company acquired substantially all of the assets of CPI Binani, Inc. ("CPI"), a wholly-owned subsidiary of Binani Industries Limited, located in Winona, Minnesota, which expanded the Company's process capabilities to include D-LFT and diversified its customer base.
Overview
For the three months ended March 31, 2017, the Company recorded net income of $1,688,000, or $0.22 per basic and diluted share, compared with net income of $2,890,000, or $0.38 per basic and diluted share for the three months ended March 31, 2016. Product sales for the three months ended March 31, 2017 decreased approximately 15% to $36,336,000 as compared to $42,530,000 for the same period in 2016, primarily due to decreased demand from heavy duty truck customers, partially offset by increased demand from BRP.
Looking forward, the Company anticipates that 2017 sales levels will decrease as compared to 2016, due to lower demand from heavy duty truck customers and lower tooling sales. Heavy-duty truck customers as well as industry analysts are forecasting decreases in Class 8 truck production of approximately 5% in 2017 compared to 2016. Industry analysts are forecasting a higher decrease in the first half of 2017 with Class 8 truck production improving in the second half of 2017.
Results of Operations
Three Months Ended March 31, 2017, as Compared to Three Months Ended March 31, 2016
Net sales for the three months ended March 31, 2017 and 2016 totaled $36,746,000 and $45,468,000, respectively. Included in total sales were tooling project sales of $410,000 and $2,938,000 for the three months ended March 31, 2017 and 2016, respectively. Tooling project sales result primarily from customer approval and acceptance of molds and assembly equipment specific to their products as well as other non-production services. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, were approximately 15% lower for the three months ended March 31, 2017, as compared to the same period a year ago. This decrease in sales is primarily the result of lower demand from customers in the heavy duty truck market, partially offset by an increase in demand from BRP.
Sales to Navistar totaled $9,275,000 for the three months ended March 31, 2017, compared to $10,890,000 for the three months ended March 31, 2016. Included in total sales was $18,000 of tooling sales for the three months ended March 31, 2017 compared to $5,000 for the same three months in 2016. Product sales decreased 15% for the three months ended March 31, 2017 as compared to the same period in the prior year, due to a change in demand and lower sales for certain products reaching the end of their product life, partially offset by new business awards.
Sales to Volvo totaled $5,266,000 for the three months ended March 31, 2017, compared to $9,276,000 for the three months ended March 31, 2016. Included in total sales was $31,000 of tooling sales for the three months ended March 31, 2017 compared to $422,000 for the same three months in 2016. Product sales to Volvo decreased 41% for the three months ended March 31, 2017 as compared to the same period in the prior year, due to a change in demand.
Sales to PACCAR totaled $5,652,000 for the three months ended March 31, 2017, compared to $8,373,000 for the three months ended March 31, 2016. Included in total sales was $190,000 of tooling sales for the three months ended March 31, 2017 compared to $2,221,000 for the same three months in 2016. Product sales to PACCAR decreased 11% for the three months ended March 31, 2017 as compared to the same period in the prior year, due to a change in demand, partially offset by new business awards.
Sales to Yamaha totaled $5,312,000 for the three months ended March 31, 2017, compared to $5,446,000 for the three months ended March 31, 2016. Product sales to Yamaha decreased 2% for the three months ended March 31, 2017 as compared to the same period in the prior year, due to a change in demand.
Sales to BRP totaled $4,734,000 for the three months ended March 31, 2017, compared to $3,949,000 for the three months ended March 31, 2016. Included in total sales was $23,000 of tooling sales for the three months ended March 31, 2017 compared to $0 for the same three months in 2016. Product sales to BRP increased 19% for the three months ended March 31, 2017 as compared to the same period in the prior year, due to a new business award.
Sales to other customers for the three months ended March 31, 2017 totaled $6,507,000, compared to $7,534,000 for the three months ended March 31, 2016. Included in total sales was $148,000 of tooling sales for the three months ended March 31, 2017 compared to $290,000 for the same three months in 2016. Product sales to other customers decreased 12% for the three months ended March 31, 2017 as compared to the same period of the prior year, due to lower sales for certain products reaching the end of their product life from a customer in the automotive market.
17
Gross margin was approximately 17.7% of sales for the three months ended March 31, 2017, compared with 19.5% for the three months ended March 31, 2016. The gross margin decline, as a percent of sales, was due to lower fixed costs leverage of 1.4% related to the decrease in sales, unfavorable net changes in selling price and material costs of 0.6% and unfavorable net change in production costs and product mix of 0.5%, partially offset by favorable foreign exchange rate effect of 0.7%.
Selling, general and administrative expense (“SG&A”) was $3,925,000 for the three months ended March 31, 2017, compared to $4,421,000 for the three months ended March 31, 2016. The decrease in SG&A expense primarily resulted from lower profit sharing expense of $479,000 due to lower earnings and lower professional services of $114,000, offset by an increase in labor and benefit costs of $281,000.
Interest expense totaled $64,000 for the three months ended March 31, 2017, compared to interest expense of $92,000 for the three months ended March 31, 2016. The decrease in interest expense was primarily due to a lower average outstanding debt balance during the three months ended March 31, 2017, when compared to the same period in 2016.
Income tax expense for the three months ended March 31, 2017 and 2016 was approximately 33% and 34% of total income before income taxes, respectively. The Company recorded net income for the three months ended March 31, 2017 of $1,688,000, or $0.22 per basic and diluted share, compared with net income of $2,890,000, or $0.38 per basic and diluted share, for the three months ended March 31, 2016.
Liquidity and Capital Resources
The Company’s primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses, increases in working capital, capital expenditures, repayment of long-term debt and business acquisitions. The Company from time to time will enter into foreign exchange contracts to mitigate risk of foreign exchange movements. As of March 31, 2017, the Company had outstanding foreign exchange contracts with notional amounts totaling $6,181,000, compared to none outstanding as of December 31, 2016.
Cash provided by operating activities for the three months ended March 31, 2017 totaled $3,626,000. Net income of $1,688,000 positively impacted operating cash flows. Non-cash deductions of depreciation and amortization included in net income amounted to $1,605,000. Changes in working capital increased cash provided by operating activities by $155,000, which primarily related to increases in accounts payable and accrued liabilities, offset by increases in accounts receivable and inventory.
Cash used in investing activities for the three months ended March 31, 2017 was $544,000, which all relate to purchases of property, plant and equipment. The Company anticipates spending up to $8,400,000 during the remainder of 2017 on property, plant and equipment purchases for all of the Company's operations. At March 31, 2017, purchase commitments for capital expenditures in progress were $645,000. The Company anticipates using existing cash and cash from operations to finance this capital investment.
Cash used in financing activities for the three months ended March 31, 2017 totaled $776,000, which primarily consisted of scheduled repayments of principal on the Company's outstanding Term Loan of $750,000.
At March 31, 2017, the Company had $30,591,000 in cash on hand, and an available balance on the revolving line of credit of $18,000,000.
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of March 31, 2017, the Company was in compliance with its financial covenants.
Management regularly evaluates the Company’s ability to effectively meet its debt covenants. Based on the Company’s forecasts, which are based on industry analysts’ estimates of heavy and medium-duty truck production volumes, customers' forecasts, as well as other assumptions, management believes that the Company will be able to maintain compliance with its financial covenants for the next 12 months. Management believes that existing cash, cash flow from operating activities and available borrowings under the Credit Agreement will be sufficient to meet the Company’s liquidity needs for the next 12 months. If a material adverse change in the financial position of Core Molding Technologies should occur, or if actual sales or expenses are substantially different than what has been forecasted, Core Molding Technologies’ liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.
18
Recent Accounting Pronouncements
For information on the impact of recently issued accounting pronouncements, see Note 12 "Recent Accounting Pronouncements," to the consolidated financial statements included herein.
Off-Balance Sheet Arrangements
The Company did not have any significant off-balance sheet arrangements as of March 31, 2017 or December 31, 2016.
The Company did not have or experience any material changes outside the ordinary course of business as to contractual obligations, including long-term debt obligations, capital lease obligations, operating lease obligations, purchase obligations or other long-term liabilities reflected on the Company’s balance sheet under GAAP, as of March 31, 2017 or December 31, 2016.
Critical Accounting Policies and Estimates
Management’s Discussion and Analysis of Financial Condition and Results of Operations discuss the Company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.
Accounts receivable allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company has determined that no allowance for doubtful accounts was needed at March 31, 2017 and December 31, 2016, respectively. Management also records estimates for chargebacks for customer returns and deductions, discounts offered to customers, and price adjustments. Should customer chargebacks fluctuate from the estimated amounts, additional allowances may be required. The Company reduced accounts receivable for chargebacks by $284,000 at March 31, 2017 and $309,000 at December 31, 2016.
Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or market. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage. The Company has recorded an allowance for slow moving and obsolete inventory of $706,000 at March 31, 2017 and $770,000 at December 31, 2016.
Derivative instruments: Derivative instruments are utilized to manage exposure to fluctuations in the United States dollar to Mexican peso exchange rate. All derivative instruments are formally documented as cash flow hedges and are recorded at fair value at each reporting period. Gains and losses related to currency forward contracts are deferred and recorded as a component of Accumulated Other Comprehensive Income in the Consolidated Statement of Stockholders' Equity and then subsequently recognized in the Consolidated Statement of Income when the hedged item affects net income. The ineffective portion of the change in fair value of a hedge is recognized in income immediately. For additional information on derivative instruments, see Note 10.
Long-Lived Assets: Long-lived assets consist primarily of property, plant and equipment and definite-lived intangibles. The recoverability of long-lived assets is evaluated by an analysis of operating results and consideration of other significant events or changes in the business environment. The Company evaluates whether impairment exists for property, plant and equipment on the basis of undiscounted expected future cash flows from operations before interest. There was no impairment of the Company's long-lived assets for the three months ended March 31, 2017 or March 31, 2016.
19
Goodwill and Other Intangibles: The Company has recorded $2,403,000 of goodwill as a result of two acquisitions. In 2001, the Company acquired certain assets of Airshield Corporation, and as a result, recorded goodwill in the amount of $1,097,000. The Company also acquired substantially all of the assets of CPI on March 20, 2015, which resulted in approximately $1,306,000 of goodwill.
The Company evaluates goodwill annually on December 31st to determine whether impairment exists, or at interim periods if an indicator of possible impairment exists. The Company evaluates goodwill for impairment utilizing the one-step qualitative assessment. The Company considers relevant events and circumstances that affect the fair value or carrying amount of the Company. Such events and circumstances could include macroeconomic conditions, industry and market conditions, cost factors, overall financial performance, entity specific events and capital markets pricing. The Company places more weight on the events and circumstances that most affect the Company's fair value or carrying amount. These factors are all considered by management in reaching its conclusion about whether to perform the first step of the impairment test.
If the Company's fair value is determined to be more likely than not impaired based on the one-step qualitative approach, a quantitative valuation to estimate the fair value of the Company is performed. Fair value measurements are based on a projected discounted cash flow valuation model, in accordance with ASC 350, “Intangibles-Goodwill and Other.”
There was no impairment of the Company's goodwill for the year ended December 31, 2016, and no indicators of impairment for the three months ended March 31, 2017.
Self-Insurance: The Company is self-insured with respect to its Columbus and Batavia, Ohio, Gaffney, South Carolina, Winona, Minnesota and Brownsville, Texas medical, dental and vision claims and Columbus and Batavia, Ohio workers’ compensation claims, all of which are subject to stop-loss insurance thresholds. The Company has recorded an estimated liability for self-insured medical and dental claims incurred but not reported and worker’s compensation claims incurred but not reported at March 31, 2017 and December 31, 2016 of $1,184,000 and $1,139,000, respectively.
Post-retirement benefits: Management records an accrual for post-retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies’ operations. The effect of a change in healthcare costs is described in Note 12 of the Notes to Consolidated Financial Statements contained in the Company's 2016 Annual Report to Shareholders on Form 10-K. Core Molding Technologies had a liability for post retirement healthcare benefits based on actuarially computed estimates of $8,652,000 at March 31, 2017 and $8,667,000 at December 31, 2016.
Revenue Recognition: Revenue from product sales is recognized at the time products are shipped and title transfers. Allowances for returned products and other credits are estimated and recorded as revenue is recognized. Tooling revenue is recognized when the customer approves the tool and accepts ownership. Progress billings and expenses are shown net as an asset or liability on the Company’s Consolidated Balance Sheet. Tooling in progress can fluctuate significantly from period to period and is dependent upon the stage of tooling projects and the related billing and expense payment timetable for individual projects and therefore does not necessarily reflect projected income or loss from tooling projects. At March 31, 2017, the Company had a net liability related to tooling in progress of $3,264,000, which represented approximately $13,795,000 of progress tooling billings and $10,531,000 of progress tooling expenses. At December 31, 2016, the Company had a net liability related to tooling in progress of $1,084,000, which represented approximately $11,052,000 of progress tooling billings and $9,968,000 of progress tooling expenses.
Income taxes: The Company’s consolidated balance sheets include a net non-current deferred tax liability of $992,000 at March 31, 2017 and December 31, 2016. The Company evaluates the balance of deferred tax assets that will be realized based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income. For more information, refer to Note 11 of the Notes to Consolidated Financial Statements contained in the Company's 2016 Annual Report to Shareholders on Form 10-K.
20
Part I — Financial Information
Item 3. | Quantitative and Qualitative Disclosures About Market Risk |
Core Molding Technologies’ primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican Peso. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes. The Company may use derivative financial instruments to hedge exposure to fluctuations in foreign exchange rates and interest rates.
Core Molding Technologies has the following three items that are sensitive to market risks: (1) Revolving Line of Credit and Term Loan under the Credit Agreement, which bears a variable interest rate; (2) foreign currency purchases in which the Company purchases Mexican pesos with United States dollars to meet certain obligations that arise due to operations at the facility located in Mexico; and (3) raw material purchases in which Core Molding Technologies purchases various resins and fiberglass for use in production. The prices and availability of these materials are affected by the prices of crude oil, natural gas and other feedstocks as well as processing capacity versus demand.
Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% decrease in the United States dollar to Mexican Peso exchange rate, the Company would be impacted by an increase in operating costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Term Loan would have been impacted, as the interest rate on these loans is based upon LIBOR. It would not, however, have a material effect on earnings before tax.
21
Part I — Financial Information
Item 4. | Controls and Procedures |
As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company’s management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company’s disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act was accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms.
There were no changes in internal control over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.
22
Part II — Other Information
Item 1. | Legal Proceedings |
From time to time, the Company is involved in litigation incidental to the conduct of its business. The Company is presently not involved in any legal proceedings which in the opinion of management are likely to have a material adverse effect on the Company's consolidated financial position or results of operations.
Item 1A. | Risk Factors |
There have been no material changes in Core Molding Technologies’ risk factors from those previously disclosed in Core Molding Technologies' 2016 Annual Report on Form 10-K.
Item 2. | Unregistered Sales of Equity Securities and Use of Proceeds |
Information concerning our stock repurchases during the three months ended March 31, 2017 is below. All stock was purchased to satisfy tax withholding obligation upon vesting of restricted stock awards.
Period | Total Number of Shares Purchased | Average Price Paid per Share | Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs | Maximum Number that May Yet be Purchased Under the Plans or Programs | ||||||||
January 1 to 30, 2017 | — | — | — | — | ||||||||
February 1 to 28, 2017 | 1,597 | 16.35 | — | — | ||||||||
March 1 to 31, 2017 | — | — | — | — |
Item 3. | Defaults Upon Senior Securities |
None.
Item 4. | Mine Safety Disclosures |
None.
Item 5. | Other Information |
None.
Item 6. Exhibits
See Index to Exhibits.
23
SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
CORE MOLDING TECHNOLOGIES, INC. | ||||
Date: | May 5, 2017 | By: | /s/ Kevin L. Barnett | |
Kevin L. Barnett | ||||
President, Chief Executive Officer, and Director | ||||
Date: | May 5, 2017 | By: | /s/ John P. Zimmer | |
John P. Zimmer | ||||
Vice President, Secretary, Treasurer and Chief Financial Officer | ||||
24
INDEX TO EXHIBIT
Exhibit No. | Description | Location | ||
2(a)(1) | Asset Purchase Agreement Dated as of September 12, 1996, As amended October 31, 1996, between Navistar and RYMAC Mortgage Investment Corporation1 | |||
2(a)(2) | Second Amendment to Asset Purchase Agreement dated December 16, 19961 | |||
2(b)(1) | Agreement and Plan of Merger dated as of November 1, 1996, between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation | |||
2(b)(2) | First Amendment to Agreement and Plan of Merger dated as of December 27, 1996 Between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation | |||
2(c) | Asset Purchase Agreement dated as of October 10, 2001, between Core Molding Technologies, Inc. and Airshield Corporation | |||
2(d) | Asset Purchase Agreement dated as of March 20, 2015, between Core Molding Technologies, Inc and CPI Binani, Inc. | |||
3(a)(1) | Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996 | |||
3(a)(2) | Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996 | |||
3(a)(3) | Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002 | |||
3(a)(4) | Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007 | |||
3(a)(5) | Certificate of Elimination of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware on April 2, 2015. | |||
3(b) | Amended and Restated By-Laws of Core Molding Technologies, Inc. | |||
3(b)(1) | Amendment No. 1 to the Amended and Restated By-Laws of Core Molding Technologies, Inc. | |||
4(a)(1) | Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996 | |||
4(a)(2) | Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996 | |||
4(a)(3) | Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002 | |||
25
Exhibit No. | Description | Location | ||
4(a)(4) | Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007 | |||
4(a)(5) | Certificate of Elimination of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware on April 2, 2015 | |||
11 | Computation of Net Income per Share | |||
31(a) | Section 302 Certification by Kevin L. Barnett, President, Chief Executive Officer, and Director | |||
31(b) | Section 302 Certification by John P. Zimmer, Vice President, Secretary, Treasurer, and Chief Financial Officer | |||
32(a) | Certification of Kevin L. Barnett, Chief Executive Officer of Core Molding Technologies, Inc., dated May 5, 2017, pursuant to 18 U.S.C. Section 1350 | |||
32(b) | Certification of John P. Zimmer, Chief Financial Officer of Core Molding Technologies, Inc., dated May 5, 2017, pursuant to 18 U.S.C. Section 1350 | |||
101.INS | XBRL Instance Document | Filed Herein | ||
101.SCH | XBRL Taxonomy Extension Schema Document | Filed Herein | ||
101.CAL | XBRL Taxonomy Extension Calculation Linkbase | Filed Herein | ||
101.LAB | XBRL Taxonomy Extension Label Linkbase | Filed Herein | ||
101.PRE | XBRL Taxonomy Extension Presentation Linkbase | Filed Herein | ||
101.DEF | XBRL Taxonomy Extension Definition Linkbase | Filed Herein |
1. | The Asset Purchase Agreement, as filed with the Securities and Exchange Commission as Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809), omits the exhibits (including the Buyer Note, Special Warranty Deed, Supply Agreement, Registration Rights Agreement and Transition Services Agreement identified in the Asset Purchase Agreement) and schedules (including those identified in Sections 1, 3, 4, 5, 6, 8 and 30 of the Asset Purchase Agreement). Core Molding Technologies, Inc. will provide any omitted exhibit or schedule to the Securities and Exchange Commission upon request. |
26