Attached files

file filename
EX-10.64 - EX-10.64 - MICRON SOLUTIONS INC /DE/hrt-20161231xex10_64.htm
EX-23.1 - EX-23.1 - MICRON SOLUTIONS INC /DE/hrt-20161231xex23_1.htm
EX-10.63 - EX-10.63 - MICRON SOLUTIONS INC /DE/hrt-20161231xex10_63.htm
EX-32.2 - EX-32.2 - MICRON SOLUTIONS INC /DE/hrt-20161231xex32_2.htm
EX-32.1 - EX-32.1 - MICRON SOLUTIONS INC /DE/hrt-20161231xex32_1.htm
EX-31.2 - EX-31.2 - MICRON SOLUTIONS INC /DE/hrt-20161231xex31_2.htm
EX-31.1 - EX-31.1 - MICRON SOLUTIONS INC /DE/hrt-20161231xex31_1.htm
EX-10.67 - EX-10.67 - MICRON SOLUTIONS INC /DE/hrt-20161231xex10_67.htm
EX-10.66 - EX-10.66 - MICRON SOLUTIONS INC /DE/hrt-20161231xex10_66.htm
EX-10.62 - EX-10.62 - MICRON SOLUTIONS INC /DE/hrt-20161231xex10_62.htm

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D. C.  20549

________________________________________________

FORM 10-K

________________________________________________



          Annual report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

For the fiscal year ended December 31, 2016 



           Transition report pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

001-9731

(Commission file number)

ARRHYTHMIA RESEARCH TECHNOLOGY, INC.

(Name of registrant as specified in its charter)





 

 

Delaware

(State or other jurisdiction of incorporation of organization)

 

72-0925679

(IRS Employer Identification Number)

25 Sawyer Passway, Fitchburg, MA

(Address of principal executive offices)

 

01420

(Zip Code)



(978) 345-5000

(Registrant's telephone number)

________________________________________________



Securities Registered pursuant to Section 12 (b) of the Act:





 

 

Common Stock, $.01 par value

(Title of Each Class)

 

NYSE MKT

(Name of each exchange on which registered)



 Securities Registered pursuant to Section 12 (g) of the Act:

None

________________________________________________

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 if the Securities Act.  Yes     No 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.  Yes     No 

Indicate by check mark whether the registrant (1) filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes     No 

 Indicate by check mark if disclosure of delinquent filers in response to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.   

 Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site if any, every interactive data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes     No 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large Accelerated filer         Accelerated filer        NonAccelerated filer        Smaller reporting company 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes     No 

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter: $17,660,327.

On March 22, 2017, there were 2,820,999 shares of the registrant's common stock, par value $.01, outstanding, which is the only class of common or voting stock of the issuer.

DOCUMENTS INCORPORATED BY REFERENCE

The registrant intends to file a definitive proxy statement pursuant to Regulation 14A within 120 days following the fiscal year ended December 31, 2016. Portions of such proxy statement are incorporated by reference into Part III of this Form 10-K.

 

 


 

Arrhythmia Research Technology, Inc.



TABLE OF CONTENTS





 

 

 



Part I

Item 1

Business

1

 

Item 1A

Risk Factors

6

 

Item 1B

Unresolved Staff Comments

11

 

Item 2

Properties

11

 

Item 3

Legal Proceedings

11

 

Item 4

Mine Safety Disclosures

11

Part II

Item 5

Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

12

 

Item 6

Selected Financial Data

12

 

Item 7

Management’s Discussion and Analysis of Financial Condition and Results of Operations

13

 

Item 7A

Quantitative and Qualitative Disclosures about Market Risk

19

 

Item 8

Financial Statements and Supplementary Data

19

 

Item 9

Changes in and Disagreements with Accountants on Accounting and Financial Disclosures

19

 

Item 9A

Controls and Procedures

20

 

Item 9B

Other Information

20

Part III

Item 10

Directors, Executive Officers and Corporate Governance

21

 

Item 11

Executive Compensation

21

 

Item 12

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

21

 

Item 13

Certain Relationships and Related Transactions and Director Independence

21

 

Item 14

Principal Accounting Fees and Services

21

Part IV

Item 15

Exhibits, Financial Statement Schedules

21



Item 16

Form 10-K Summary

21

 

 

Signatures

22

Exhibit Index

 

23



 

 

 


 

PART I



Item 1. BUSINESS



OVERVIEW



Arrhythmia Research Technology®, Inc., a Delaware corporation ("ART"), through its wholly-owned Massachusetts subsidiary, Micron Products®, Inc. (“Micron” and together with ART, the "Company"), is a diversified contract manufacturing organization (“CMO”) that produces highly-engineered, innovative medical device components requiring precision machining and injection molding. The Company also manufactures components, devices and equipment for military, law enforcement, automotive and consumer product applications. The Company is engaged in the production and sale of silver/silver chloride coated and conductive resin sensors used as consumable component parts in the manufacture of integrated disposable electrophysiological sensors. These disposable medical devices are used worldwide in the monitoring of electrical signals in various medical applications. The Company's machining operations produce quick-turn, high volume and patient-specific finished orthopedic implant components. The Company has custom thermoplastic injection molding capabilities as well, and provides a full array of design, engineering, production services and management. The Company competes globally, with nearly forty percent of its revenue derived from exports. The Company’s shares have traded on the NYSE MKT since 1992 under the symbol HRT.



Micron is a diversified contract manufacturing organization and provides design, engineering, quality and regulatory expertise across the Company’s three product lines, machining, thermoplastic injection molding and sensors, with lean and fast fulfillment systems using proprietary manufacturing processes to enable the Company’s customers to be competitive throughout the product life cycle.      



ART's wholly-owned Pennsylvania subsidiary, RMDDxUSA Corp, ("RMDDxUSA") and that subsidiary's Prince Edward Island subsidiary, RMDDx Corporation ("RMDDx" and, collectively with RMDDxUSA, sometimes referred to as “WirelessDx”) discontinued operations in 2012 and filed a voluntary petition for relief under Chapter 7 (Liquidation) of the United States Bankruptcy Code in May 2014. In March 2015, the Chapter 7 Order was formally discharged by the assigned trustee and the case was closed.  The results of WirelessDx are presented as discontinued operations throughout the financial statements and footnotes included elsewhere in this Form 10-K.



Contract Manufacturing



Machining



The Company is a contract manufacturer of components and instruments for medical devices including, but not limited to large joint replacements. The Company manufactures replacement knee components including femorals, tibia trays, ultra-high-molecular-weight polyethylene (“UHMWPE”) inserts, trials and instrumentation as well as hip stems and smaller fixation plates used in rib and wrist fractures.  These parts are made from investment castings (F-75, stainless steel), machining wrought bar (F-75, stainless steel, F-136 Ti 6A-4V ELI), UHMWPE, polyether ether ketone (“PEEK”), Raydel® and other materials.  The Company also provides medical grade finishing, polishing, ultrasonic cleaning and passivation. The manufacturing process includes computer aided design ("CAD"), computer-aided manufacturing (“CAM”) computer numerical controlled ("CNC") machining using single piece flow manufacturing methods for personalized orthopedic implant components as well as higher volume off-the-shelf components in a variety of sizes.  The Company deploys the latest technologies in computer aided design, computer aided manufacturing (CAD/CAM) methodology, and up to 11-axis CNC vertical milling, mill-turning and wire electrical discharge machining (“EDM”).  These products involve complex programming and machining of wrought, cast and forged cobalt-chromium-molybdenum, titanium, and stainless steel alloys, as well as ultra-high molecular weight polymers to customer specifications. The Company brings articular surfaces of implant components to a highly polished state as part of the manufacturing process and offers, passivation, cleaning and packaging.  The Company produces superior contoured machined surfaces on metal and high molecular weight polymers to complete the implant kit. Whether patient-specific, where each implant is a different geometry, or standard-sized off-the-shelf products, each requires precision, speed, and adherence to the most stringent of quality standards. Additional capabilities include laser marking, automated polishing, passivation, and coatings.



Thermoplastic Injection Molding



The Company's custom thermoplastic injection molding services are especially suited to meet the needs of customers who require very high quality parts, clean room molding, assembly and packaging to tight tolerances using engineered materials. The Company offers highly automated pick and place packaging, assembly, and in-cycle vision inspection. Micron’s ITAR registration and Federal Firearms license assures military and defense customers that their stringent regulatory requirements are in compliance. The Company also offers over-molding, insert molding, high volume/low change, and low volume/high change injection molding.  The Company adds value with highly repeatable and reliable manufacturing with ongoing innovations for cost improvements.  Other value added services including packaging, assembly, pad printing, ultrasonic welding, stamping, laser marking, clean room molding, clean room assembly, specialty coatings, and plastic machining. 

1


 



Other Products and Services



The Company provides its customers with key value added services, including the design, manufacture, and rehabilitation of injection molding tools. These capabilities leverage significant cost savings and speed by vertically integrating mold making and repair into the Company’s sensor and thermoplastic injection molding businesses. The Company’s engineers and mold designers work with customers’ product development engineers to design and produce unique tooling for their products. The Company creates a sustainable partnership with the customers from prototyping to full scale production. The design and manufacture of tooling is an indicator of future product revenue.



The Company's product life cycle management program is focused on the integration of plastic and metal components into sub-assemblies. The value added service of in-house production capabilities combined with a network of subcontracted specialty coatings, metallurgical treatments, and unique production capabilities has enabled the Company to diversify its capabilities to include defense industry consumables and equipment sub-assemblies.



Sensors



Micron is a manufacturer and distributor of silver-plated and non-silver plated conductive resin sensors for use in the manufacture of disposable electrodes for electrocardiogram ("ECG") diagnostic, monitoring and related instrumentation. Micron's sensors consist of a molded plastic substrate plated with a silver/silver chloride surface, which is a highly sensitive conductor of electrical signals. Silver/silver chloride-plated disposable electrodes are utilized in coronary care units, telemetry units, and for other monitoring purposes. In addition to the traditional ECG tests, disposable electrodes incorporating Micron’s sensors are used in connection with stress tests, Holter monitoring, and event recorders.



Micron also manufactures sensors and conductive plastic studs used in the manufacture of radio translucent electrodes. The radio translucent conductive plastic studs are manufactured with uniquely engineered resin to enable electrical conductivity between the sensor and the recording instrument without the use of a metal snap. The radio translucent electrodes are virtually invisible to X-rays and are preferred in some medical environments such as nuclear medicine, cardiac catheterization laboratories, and certain stress procedures. Micron also manufactures the mating conductive resin snaps, which replace traditional metal snap fasteners in the radio translucent applications. These sensors and snaps have undergone testing and received a MR-Conditional designation in accordance with the American Society for Testing and Materials (ASTM) specifications F2052-06e1, F2182-09 and F2119-07 from a licensed, accredited, independent testing laboratory. Other custom designed sensors are manufactured for specific unique applications in the electroencephalogram (EEG), electro-muscular stimulation (EMG) or thermo-electrical neural stimulation (TENS) markets.



Customers and Net Sales



The Company offers its products and services to customers of all sizes, including large original equipment manufacturers (OEMs) and other contract manufacturing organizations.  The Company manufactures products upon receipt of purchase orders.  The Company generally does not receive purchase volume commitments extending beyond several months; however, the Company has a track record of establishing long term relationships with customers which results in repeat business year over year.



During the year ended December 31, 2016, the Company had net sales to two customers constituting 19% and 12% of total 2016 net sales. Accounts receivable from these two customers at December 31, 2016 was 26% and 7%, respectively, of the total accounts receivable balance at year end. During the year ended December 31, 2015, the Company had net sales to two customers constituting 16% and 13%, respectively, of total 2015 net sales. Accounts receivable from these two customers at December 31, 2015 was 9% for each of the total accounts receivable balance at year end.



Net sales to the largest two customers accounted for 31% of total net sales in 2016 whereas in 2015 the top two customers accounted for  29% of total net sales. In 2016, the Company's two largest customers represented two of the Company's product lines.  The following table sets forth, for the periods indicated, the consolidated revenue from continuing operations and percentages of revenue derived from the sale of the Company’s products and services in certain industries.





 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 



 

Revenue for the Years Ended December 31,



 

2016

 

   %

 

2015

 

%

Medical

 

$

14,543,315 

 

74 

 

$

16,770,788 

 

78 

Automotive/Industrial

 

 

3,787,312 

 

19 

 

 

2,839,926 

 

13 

Consumer Products

 

 

744,738 

 

 

 

647,190 

 

Military and Law Enforcement

 

 

383,254 

 

 

 

943,603 

 

Other

 

 

179,598 

 

 

 

293,677 

 

Total

 

$

19,638,217 

 

100 

 

$

21,495,184 

 

100 

2


 

The following table sets forth, for the periods indicated, the consolidated revenue from continuing operations and percentages of revenue derived from the sales of all of the Company's products and services by geographic market.







 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 



 

Revenue for the Years Ended December 31,



 

2016

 

   %

 

2015

 

%

United States 

 

$

12,206,761 

 

62 

 

$

13,199,188 

 

61 

Asia

 

 

4,283,180 

 

22 

 

 

4,774,910 

 

22 

Europe 

 

 

1,677,100 

 

 

 

1,662,318 

 

Canada 

 

 

1,268,817 

 

 

 

1,607,445 

 

Other 

 

 

202,359 

 

 

 

251,323 

 

Total 

 

$

19,638,217 

 

100 

 

$

21,495,184 

 

100 



While some risks exist in foreign markets, the Company’s customers have historically been based in stable regions.  Approximately 40% of the Company’s revenue is derived from exports.  To reduce the risks associated with foreign shipments and currency exchange fluctuations, the title to most of the products are transferred to the customers when shipped.  Payment is required in U.S. Dollars.  The Company also has agreements with certain foreign customers to hold inventory at customer locations where revenue is recognized when the product is consumed by the customer.



Marketing and Competition



The Company markets its capabilities and services to current and potential customers to provide full product life-cycle support to their product manufacturing needs. The Company's sales force leverages its long standing relationships, targeting new and potential customers through direct marketing via Micron’s website (www.micronproducts.com)  and regularly attending industry trade shows. The Company provides value added U.S. based manufacturing capabilities with plating/coating, injection molding, machining, mold making, maintenance and repair. Customers seek the Company's ability to produce complex products on short time lines and to their specifications. Micron’s ISO 13485:2003 and ISO 9001:2008, registrations, the international quality standards for medical devices and manufacturing, qualify Micron to further expand into products requiring tight controls and high standards.  The Company’s International Traffic in Arms Regulation ("ITAR") registration with the U.S. Department of State ("State Department") allows the Company to compete in military and law enforcement applications restricted by export controls and the U.S. Department of Defense ("DOD"). Micron also holds a class 10 federal firearms license and a federal explosives license for manufacture of products for the military and law enforcement.



The Company's U.S. based manufacturing capabilities are offered in a global and highly competitive market. Free trade agreements increase global competition, making every company in the same manufacturing arena around the world a potential customer or competitor. To meet this challenge, the Company focuses its development efforts on complex engineered products. Some of these products require specialty material, such as engineered resins, exotic metals, and alloys.  Micron has over forty years of experience in some product areas with long customer relationships and has developed competitive advantages through decades of constant process improvement and utilization of Lean/Six Sigma principles. The Company competes on the basis of quality and speed to market. The Company also believes its expertise in manufacturing and processes to comply with governmental regulations governing medical devices provides a competitive advantage in the marketplace. To remain competitive and to expand market share, the Company invests in training and educating its workforce, expanding manufacturing capacity and automating processes to increase productivity.



Manufacturing and Suppliers



The Company has registered its facilities with the U.S. Food and Drug Administration ("FDA") as well as under the U.S. State Department's ITAR registration. Micron is ISO 13485:2003 and ISO 9001:2008 registered.  Micron's injection molding machine capacity ranges from 15 to 220 tons and includes an ISO class 7 clean room. Machining, mold making and tooling capabilities include up to 11 axis CNC machining and mill-turn centers, wire electrical discharge machining ("EDM"), milling, turning,  grinding, polishing, cleaning, passivation, assembly and packaging. Surface coating capabilities include electroless and electrolytic silver platingA skilled employee base provides expertise in engineering, complex manufacturing, materials, process control, quality and automation.



While some customers may require engineered raw materials, the Company also uses commodity raw materials as the basis for its value-added manufacturing operations. Many of these commodities are widely available from multiple sources. Some specialty plastics are single sourced and, in a few cases, proprietary to the products the Company manufactures. The Company monitors the supply chain for commodity materials to manage availability in case of breaks in the global supply chain. For many products, the Company is one step in a complex supply chain for OEM customers. This requires coordination with upstream and downstream vendors in the supply chain. Coordination of production scheduling is imperative to meeting customer expectations.



3


 

Inventory Requirements



The Company stocks inventory of raw materials, work in process, and finished goods. 



The Company manages inventory levels to balance customer delivery requirements, manufacturing production scheduling efficiencies and supply chain coordination from suppliers and to customers. In many cases, the Company produces to a purchase order in a single production run to optimize production efficiency and holds inventory for customers to support multiple delivery dates. The Company also has supply agreements with certain foreign customers to hold inventory at customer’s warehouses.  Customers benefit from Micron's ability to hold inventory on their behalf for just-in-time deliveries while the Company benefits from being able to optimize efficiencies of production scheduling and raw material volume purchasing.



Research and Development



Research and development of a unique process to improve silver coating and sensor performance is ongoing and includes the design and testing of specific process improvements for certain medical device components. The Company also conducts customer funded research and development of new products in the military and law enforcement industry.  For the year ended December 31, 2016 the Company spent $97,234 on research and development compared to $241,100 for the year ended December 31, 2015.



Patents and Proprietary Technology



The Company develops and utilizes proprietary manufacturing processes to establish and maintain a competitive advantage. By having internal engineering, mold making, automation and manufacturing expertise, the Company is able to develop specialized processes throughout the product development and product manufacturing cycle.  The Company is currently developing software to automate the CAM programming for orthopedic implants and instrumentation for its customers.  The Company submitted one patent application following work completed during 2016.  The Company is also working on several other projects which may qualify for patent protection. 



Government Regulation



The Company's operations are subject to government regulations which establish compliance standards. As a result, there may be additional costs incurred to comply with such regulations in order to participate in certain markets. The medical device industry in particular requires strict compliance with governmental standards. The Company believes its expertise in manufacturing and processes to comply with these regulations provides a competitive advantage in the marketplace.  The FDA and the European Union equivalent ("CE Mark") promulgate quality systems requirements under which a medical device is to be developed, validated and manufactured. The DOD, Bureau of Alcohol, Tobacco, Firearms and Explosives (BATFE) and the State Department also impose regulations on the production and transfer of certain goods and technical data. Because customers own the product designs, they may be directly subject to such regulations.  The development or manufacture of such products must be managed in accordance with applicable regulatory requirements and any special controls required by customers. The Company's manufacturing facilities are subject to periodic inspections by the FDA to determine compliance with the quality system and medical device reporting regulations and other requirements.



Conflict Minerals



The Financial Reform Bill (H.R. 4173) of the Dodd-Frank Wall Street Reform and Consumer Protection Act, also known as the Dodd-Frank Act, imposed reporting requirements relating to the use of a group of minerals extracted from the Democratic Republic of Congo ("DRC") and surrounding regions. These minerals are known as “Conflict Minerals” and include tin, tungsten, tantalum and gold. The Company uses tin in parts of its production and its suppliers have confirmed that none of the tin or tin concentrates used by the Company in the production of products originate from the DRC or surrounding regions.



Environmental Regulation



The Company's operations involve use of hazardous and toxic materials and generate hazardous, toxic and other regulated wastes.  Its operations are subject to federal, state and local laws, regulations and directives governing the use, storage, handling and disposal of such materials and certain waste products. Micron practices and reaffirms its commitment to and performance of the highest standards of environmental controls and occupational health and safety standards.  Micron has developed an internal system of compliance and has introduced many new initiatives including the use of solar energy to benefit from renewable energy generation and reduce overall costs associated with production. The Company employs best practices to reduce waste from its manufacturing operations and reclaims, recovers, and reuses materials to reduce pollutants and to minimize the impact on the environment.   The Company also works closely with state and local officials to ensure compliance with current and proposed regulations while supporting a regulatory environment that allows complex manufacturing to be competitive globally.



4


 

Seasonality



In general, the Company does not experience significant seasonality in its business. However, as a component supplier within broad manufacturing supply chains, occasional seasonal adjustments to production schedules may impact timing of orders from customers and consequently result in quarterly fluctuations in revenue.



Employees



As of December 31, 2016, the Company had a total of 107 employees, of which 106 were full time employees as compared to 108, of which 104 were full time at December 31, 2015. Management believes that continued success will depend on its ability to retain and recruit skilled personnel. The Company has never had a work stoppage and none of the Company's employees are represented by a union. Management believes the Company has a good relationship with its employees.



Periodic Reporting and Financial Information



The Company registered its common stock under the Securities Exchange Act of 1934, as amended (the "Exchange Act"), and has reporting obligations, including the requirement that it file annual and quarterly reports with the SEC.  The public may read and copy materials the Company files with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549, on official business days during the hours of 10:00 am to 3:00 pm.  You may obtain information about the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.  The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC at http://www.sec.gov. The Company also makes available through its website the annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K and amendments to those reports as soon as reasonably practical after filing with the SEC. Its website address is http://www.arthrt.com. Information on the Company's website is not part of this Annual Report on Form 10-K.



5


 

Item 1A. RISK FACTORS



In addition to the other information in this Form 10-K, the following factors should be considered in evaluating the Company and its business.  The risks and uncertainties described below are not the only ones facing the Company.  Further, the market price of the Company’s common stock could be subject to significant fluctuation or otherwise be adversely affected by the events, risks and uncertainties described in this “Risk Factors” section.  Additional risks and uncertainties that the Company does not presently know or that are currently not deemed significant to the Company's business may also impair the Company’s business, results of operations and financial condition.



The Company’s operating results may fluctuate significantly in the future as a result of a variety of factors, many of which are outside of the Company's control.  These factors include:

·

the Company's ability to obtain and retain order volumes from customers who represent high proportions of revenue;

·

the Company's ability to maintain the pricing model, offset higher costs with price increases and/or decrease the cost of sales;

·

the variability of customer delivery requirements and the ability of the Company to anticipate and respond thereto;

·

the level of sales of higher margin products and services and the Company's ability to increase such sales;

·

volatility in commodity and energy prices and the Company's ability to offset higher costs with price increases;

·

the Company's ability to renew its credit facility and manage its level of debt which makes the Company sensitive to the effects of economic downturns; the Company's level of debt and provisions in the debt agreements could limit the Company's ability to react to changes in the economy or its industry;

·

the Company's failure to comply with the financial and other covenants contained in its credit facility, including as a result of events beyond its control, which could result in an event of default, and adversely affect the Company's operating results and financial condition;

·

the Company’s reliance on revenue from exports and the impact on the Company’s financial results due to economic uncertainty, changes in trade policy, tax laws and regulations, or downturns in foreign markets;

·

continued availability of supplies or materials used in manufacturing at competitive prices;

·

the amount and timing of investments in capital equipment, sales and marketing, engineering and information technology resources;

·

the Company's ability to attract and retain employees with the skills to meet the technically complex demands of manufacturing;

·

entrance of competitive products and services in the Company's markets;

·

the Company's ability to execute plans and motivate personnel in the execution of those plans;

·

the Company's ability to protect and retain trade secrets related to the Company's manufacturing processes;

·

adverse claims relating to the Company's intellectual property and product liability claims affecting the Company's products;

·

adoption of new, or changes in, accounting principles; and passage of new, or changes in regulations;

·

adverse regulatory developments specifically healthcare policy changes, environmental and other regulatory changes;

·

the costs inherent with complying with statutes and regulations applicable to public reporting companies, such as the Sarbanes-Oxley Act of 2002 and the Dodd-Frank Wall Street Reform and Consumer Protection Act of 2010;

·

the Company's ability to efficiently integrate future acquisitions and new lines of business that the Company may enter in the future, if any;

·

the Company's ability to maintain compliance with the NYSE MKT requirements for continued listing of the Company's common stock in which event the Company's securities may be delisted from the NYSE MKT which could limit investors' ability to effect transactions in the Company's securities and subject the stock to additional trading restrictions;

·

other risks referenced from time to time elsewhere in this report and in the Company’s filings with the SEC; and

·

general economic conditions.



As a response to changes in the competitive environment, the Company may from time to time make certain pricing, service, technology or marketing decisions, or business or technology acquisitions, or experience fluctuations or reductions in customer orders that could have a material adverse effect on the quarterly and annual results.  Due to all of these factors, the operating results may fall below the expectations of stockholders and investors in any future period and make period to period comparisons difficult.



6


 

The Company is dependent on a limited number of large customers. The loss of, or inability to obtain and retain order volumes from, one or more of these customers, could have an adverse effect on the Company's financial results.



During the year ended December 31, 2016, the Company had net sales to two customers constituting 19% and 12% of total 2016 net sales. Accounts receivable from these two customers at December 31, 2016 was 26% and 7%, respectively,  of the total accounts receivable balance at year end. During the year ended December 31, 2015, the Company had net sales to two customers constituting 16% and 13%, respectively, of total 2015 net sales. Accounts receivable from these two customers at December 31, 2015 was 9% for each of the total accounts receivable balance at year end.



Sales to the largest two customers accounted for 31% of total net sales in 2016 whereas in 2015 the top two customers accounted for 29% of total net sales. Large corporations can change their demand for the Company's products and services with little or no warning making it difficult to forecast beyond the current or next quarter. In the case of precious metal plating, customer purchase arrangements take into account the fluctuating price of precious metals.



The loss of, or significant reduction in order volume, from one or more of these customers, could have an adverse effect on the Company's financial results.



The Company competes globally,  with a large portion of its revenue derived from exports.  Economic uncertainty or downturns in foreign markets could result in variability or have an adverse effect on the Company’s financial results. 



While some risks exist in foreign markets, the Company’s customers have historically been based in stable regions.  Approximately 40% of the Company’s revenue is derived from exports. To reduce the risks associated with foreign shipments and currency exchange fluctuations, the title to most of the products are transferred to the customers when shippedThe Company also has agreements with certain foreign customers to hold inventory at customer locations where revenue is recognized when the product is consumed by the customer. Payment for all product is required in U.S. Dollars.    Additionally, the strength of the U.S. Dollar could affect the demand for the Company’s products, or the timing of orders.  This uncertainty could have an adverse effect on the Company’s financial results.   



In June 2016, the United Kingdom (the “U.K.”) held a referendum in which voters approved an exit from the European Union (the “E.U.”), commonly referred to as “Brexit”.    The uncertainty surrounding the terms of the U.K.’s withdrawal and its consequences may create global economic uncertainty, or disrupt trade between the U.K. and the E.U.  This uncertainty may cause the Company’s customers to closely monitor their costs and reduce their spending budget which could adversely affect the Company’s financial condition.



Adverse developments in U.S. government trade policy and legislation, the imposition of tariffs or changes in diplomatic relations with countries in which our customers are located or conduct business may adversely affect our financial condition and results of operations.



The recent presidential and congressional elections in the United States could result in significant changes in, and uncertainty with respect to, legislation, regulations and monetary, tax and trade policy, among other things.  Potential changes in U.S. government trade policy and legislation, including changes to tax laws, withdrawal from or modification of international trade agreements, the imposition of additional tariffs on goods or other restrictions on trade and any changes in diplomatic relations with countries in which our customers are located or in which they conduct business may adversely affect our customers and, as a result, could materially affect our operating results. 



Quarter to quarter variables, such as customer mix and profitability by product line, can be expected to result in fluctuations in quarterly results and make quarter to quarter comparisons difficult.



The Company is a contract manufacturing organization providing components to a wide array of industries and supplying OEM’s of various sizes up to and including Fortune 500 Companies.  As a result of the diversity of components and the Company’s reliance on large OEM’s, who can change their demand with little or no notice, the Company will continue to see fluctuations in quarterly revenue and earnings, which could make quarter to quarter and year over year comparisons difficult.



The Company’s top five customers, covering all three products lines, comprised 51% of sales in both 2016 and 2015.  As the Company continues to diversify its revenue base across all its product lines, the broader customer mix results in additional variables which can affect operating results, product mix, product line gross margins and customer ordering patterns.



7


 

If the Company is unable to keep up with rapid technological changes, the processes or services it offers, or products it manufactures, may become obsolete or if the Company is no longer able to effectively manufacture, market and distribute these products, it could have a material adverse effect on the Company's financial condition.



The medical device industry is characterized by continual technological change.  Although the Company attempts to expand technological capabilities in order to remain competitive, the Company may be unable to effectively develop and market competitive products, processes and services, or be able to meet the manufacturing needs related to new discoveries or developments by others, on a timely basis. This may make the Company’s processes, products or services obsolete or uneconomical.  Any substantial technological advance that eliminates one or more of the Company’s product lines could have a material adverse effect on the Company's operating results.    The Company generally does not receive purchase volume commitments extending beyond several months. Large corporations can shift focus away from a need for the Company’s products and services with little or no warning. Additionally, should any of the Company’s large OEM customers decide to vertically integrate the manufacturing of a product line, or chose to limit the number of qualified suppliers, the Company’s operating results may be adversely impacted.    If the Company cannot compete effectively in the marketplace, the Company's future prospects and financial results may be adversely impacted.



The Company's dependence on large OEM customers, which can change demand on short notice, adds to the unpredictability of quarterly sales and earnings.



The Company’s large OEM customers are not required to have purchase volume commitments extending beyond several months and often lack dependable long-term forecasts. In addition, the Company’s large OEM customers may change their demand schedule, either up or down, within a relatively short time horizon.  Further, large OEM customers may choose to develop the capability of producing their own products. In addition, new customers may experience development delays, such as delays in FDA approvals, marketing delays in the development of sales channels or inadequate financing, any of which may delay the launch of new products and therefore may affect the timing of sales.



The Company's quarterly results have in the past and can be expected in the future to vary due to changes in demand within a quarter from large OEM customers. These changes in demand may also result in the Company incurring additional working capital costs and increased manufacturing unit cost due to these short-term fluctuations.  The expense levels and inventory, to a large extent, are based on shipment expectations in the quarter.  If sales levels fall below these expectations, through a delay in orders or otherwise, operating results are likely to be adversely affected.  An inability to accurately predict customer requirements makes cost-saving measures more difficult to implement.



Although the Company seeks to leverage its demonstrated product quality and expertise to expand its customer base and lessen its dependence on a few large customers, it can provide no assurance that it will be able to materially alter this dependency in the immediate future, if at all.



The failure to repay or renew the Company's credit facility upon maturity or to comply with financial and other covenants contained therein, or to timely repay or refinance its subordinated debt, including as a result of events beyond the Company's control, could result in an event of default, which, if incurred, could materially and adversely affect operating results and financial condition.



The Company's credit facility contains covenants that relate to various matters including debt and leverage ratios, further borrowings and security interests, merger or consolidation, acquisitions, guarantees, sales of assets other than inventory or obsolete equipment in the normal course of business, changes in management or ownership and payment of dividends. If there were an event of default under any of the debt instruments under the credit facility or the Company’s subordinated debt that was not cured or waived, the holder of the defaulted debt could cause all amounts outstanding with respect to all debt owed to it to be due and payable immediately. The Company's ability to make payments on the indebtedness depends on the ability to generate cash. If the Company does not generate sufficient cash flow to meet the debt service and working capital requirements, it may need to seek additional financing. Failure to generate sufficient cash flow may result in a violation of financial covenants and default under the Company's debt agreements, cause the Company to default on its subordinated debt and make it more difficult to obtain financing on terms that are acceptable, or at all. Management cannot assure that the Company's assets or cash flow would be sufficient to fully repay borrowings under the outstanding debt instruments, either upon maturity or upon an event of default, or that the Company would be able to extend, refinance or restructure the payments on those debt instruments.



The level of debt makes the Company more sensitive to the effects of economic downturns; the level of debt and provisions in the debt agreements could limit the Company's ability to react to changes in the economy or industry.



The level of debt makes the Company more vulnerable to changes in the results of operations. The Company's level of debt could have other negative consequences, including the following:

·

Limiting the Company's ability to borrow money or sell stock for working capital, capital expenditures, debt service requirements or other general corporate purposes;

8


 

·

Limiting the Company's flexibility in planning for, or reacting to, changes in operations, business or the industries in which the Company competes; and

·

Leverage may place the Company at a competitive disadvantage by limiting its ability to invest in the business or in further research and development.



In addition, the Company's credit facility contains covenants that limit the flexibility in planning for or reacting to changes in the business and industry, including limitations on incurring additional indebtedness, making investments, granting liens and merging or consolidating with other companies. Complying with these covenants may impair the Company's ability to finance the future operations or capital needs or to engage in other favorable business activities.



Medical devices are subject to extensive governmental regulations relating to the manufacturing, labeling and marketing of such products and failure to comply with such regulations may adversely impact the Company’s operations and results of operations.



The medical device components the Company manufactures for its customers are subject to regulation by the FDA in the United States and other governmental authorities internationally. The process of obtaining regulatory approvals to market a medical device can be costly and time consuming for the Company's customers and approvals might not be granted for future products on a timely basis, if at all. Any such approvals may delay the Company's ability to commence production of a new or modified product. Under FDA regulations such products and the Company's manufacturing facilities are subject to periodic inspections by the FDA to determine compliance with the quality system and medical device reporting regulations and other requirements. If the Company fails to fully comply with applicable regulatory requirements, the Company or its customers may be subject to a range of sanctions, including warning letters, product recalls and the suspension of product manufacturing, monetary fines and criminal prosecution.



Economic uncertainty, as well as impact of healthcare reform legislation, may reduce patient demand for knee or other joint replacement procedures.  If there is not sufficient patient demand for the procedures for which orthopedic implant products are used, customer demand for the Company’s orthopedic implant components and instruments would likely drop, and its business, financial condition and results of operations could be harmed.



The orthopedics industry in which the Company’s customers operate is vulnerable to economic trends and the impact of healthcare reform legislation.  If joint replacement procedures are deemed to be elective procedures, the cost of the procedure may not be fully covered by or reimbursable through government, including Medicare or Medicaid, or private health insurance. In times of economic uncertainty or recession, individuals may reduce the amount of money that they spend on deferrable medical procedures, including joint replacement procedures.  Economic downturns in the United States and international markets could have an adverse effect on demand for the Company’s orthopedic implant components and instruments.  In addition, the Company’s customers may be impacted by current or future executive orders and legislative actions impacting healthcare reform. 



Failure to comply with Quality System Regulations or industry standards could result in a material adverse effect on the Company's business and results of operations.



The Company's Quality Management System complies with the requirements of ISO 13485:2003 and ISO 9001:2008. In addition the Company has registered its manufacturing facilities under ITAR and with the FDA.  If the Company is not able to comply with the Company’s Quality Management System or industry-defined standards, it may not be able to fill customer orders to the satisfaction of its customers.  Failure to produce products compliant with these standards could lead to a loss of customers which would have an adverse impact on the Company's business and results of operations. Violations of the ITAR, FDA and other regulations may subject the Company to significant fines or penalties, which could have an adverse impact on the Company’s results of operations.



If trade secrets are not kept confidential, the secrets may be used by others to compete against the Company.



The Company relies on trade secrets to protect its proprietary processes and there are no assurances that others will not independently develop or acquire substantially equivalent technologies or otherwise gain access to the proprietary process.  The meaningful protection of such proprietary technology cannot be guaranteed.  The Company relies on confidentiality agreements with its employees.  Remedies for any breach by a party to these confidentiality agreements may not be adequate to prevent such actions.  Failure to maintain trade secret protection, for any reason, could have a material adverse effect on the Company.



The Company is subject to stringent environmental regulations.



The Company's manufacturing operations are subject to a variety of federal, state and local requirements governing the protection of the environment.  These environmental regulations include those related to the use, storage, handling, discharge and disposal of toxic or otherwise hazardous materials used in or resulting from the Company's manufacturing processes.  Failure to comply with environmental laws could subject the Company to substantial liability or force the Company to significantly change its

9


 

manufacturing operations.  In addition, under some of these laws and regulations, the Company could be held financially responsible for remedial measures if its properties are contaminated, even if it did not cause the contamination.



A product liability suit could adversely affect the Company's operating results.



The testing, manufacturing, marketing and sale of the customer's and Company's medical devices and/or components, including orthopedic implant components and instruments, as well as components for the military and law enforcement industry, entail the inherent risk of liability claims or product recalls. If the Company's customers are involved in a lawsuit, it is possible that the Company would also be named.  Although the Company maintains product liability insurance, coverage may not be adequate. Product liability insurance is expensive, and in the future may not be available on acceptable terms, if at all. In addition, the Company may incur significant legal expenses and damage to the Company’s reputation in the event of any such claim regardless of whether the Company is found to be liable. A successful product liability claim or product recall could have a material adverse effect on the business, financial condition, and ability to market the Company's products and services in the future.



The market price of the Company’s common stock is volatile.

 

The market price of the Company’s common stock has in the past been, and may in the future continue to be, volatile.  A variety of events may cause the market price of the Company’s common stock to fluctuate significantly, including, but not limited to, quarter to quarter variations in operating results, adverse or positive news reports or public announcements and market conditions within the Company’s industry.  Due to the relatively small public float for the Company’s common stock, trading of such shares may have a disproportionate effect on the stock price.  In addition, the stock market in recent years has experienced significant price and volume fluctuations. This volatility has had a substantial effect on the market prices of stock, at times for reasons unrelated to their operating performance.  Trading in the Company’s stock or market fluctuations may adversely affect the price of the Company’s common stock.



The Company may seek to make acquisitions of companies, products or technologies that may disrupt the business and divert management’s attention, cause the Company to incur additional costs, debt or issue equity securities and adversely impact its results of operations and financial condition.



The Company may seek to develop or make acquisitions of complementary companies, products or technologies from time to time.  Any acquisitions will require the assimilation of the operations, products and personnel of the acquired businesses and the training and motivation of these individuals. Further, such activities may divert management's attention and could result in an inability to realize the expected benefits, savings or synergies from the acquisition, the loss of key personnel of the acquired company, and exposure to unexpected liabilities of the acquired company. The Company also may have to, or choose to, incur additional costs, incur debt or issue equity securities to pay for any future acquisitions and its working capital needs.  Such financing may not be available to the Company or may be on terms that involve covenants and financial ratios that may restrict the Company's ability to operate its business. The issuance of common stock, preferred stock or other equity securities in connection with an acquired business could be substantially dilutive to the stockholders’ holdings.  The Company cannot give any assurance that any such acquisitions will become profitable or remain so or will not have a material unfavorable impact on it.  The Company is not currently party to any agreements, written or oral, for the acquisition of any company, product or technology.



The Company could be negatively affected as a result of the actions of activist or hostile stockholders.



The Company could be negatively affected as a result of shareholder activism, which could cause the Company to incur significant expense, hinder execution of its business strategy and impact the trading value of the Company’s stock. Shareholder activism, which could take many forms or arise in a variety of situations, has been increasing in publicly traded companies in recent years.  The Company is subject to the risks associated with such activism in light of the fact that a shareholder filed a Schedule 13D in November 2015 expressing an intent to engage in substantive discussions with management, the Board of Directors and others relating to the Company’s operations, its management, strategy and other matters. Shareholder activism, including potential proxy contests, requires significant time and attention by management and the Board of Directors, potentially interfering with the Company’s ability to execute its strategic plan. Additionally, such shareholder activism could give rise to perceived uncertainties as to the Company’s future direction, adversely affect its relationships with key executives, customers and other business partners, or make it more difficult to attract and retain qualified personnel. Also, the Company has been, and may in the future be, required to incur significant legal fees and other expenses related to activist shareholder matters. Any of these impacts could materially and adversely affect the Company and operating results.



The Company may be exposed to potential risks relating to internal control over financial reporting.



As required by Section 404 of the Sarbanes-Oxley Act of 2002 (“SOX”), the SEC adopted rules requiring public companies to include a report of management on the Company’s internal control over financial reporting in their annual reports, including Form 10-K.  In addition, if a reporting company is an accelerated filer or a large accelerated filer (as defined by the Exchange Act), the independent registered public accounting firm auditing a reporting Company’s financial statements must also attest to and report on 

10


 

the reporting company’s internal control over financial reporting as well as the operating effectiveness of the reporting company’s internal control.  The Company was only subject to the management evaluation and review portion of these requirements for the fiscal year ended December 31, 2016. The Company's failure to satisfy the requirements of Section 404 of SOX on an ongoing, timely basis could result in the loss of investor confidence in the reliability of the Company’s financial statements, which in turn could harm the Company’s business and negatively impact the trading price of the Company’s common stock. In addition, any failure to implement required new or improved controls, or difficulties encountered in their implementation, could harm the Company’s operating results or cause the Company to fail to meet its reporting obligations.



Failure to comply with the listing requirements of the NYSE MKT could lead to the commencement of delisting proceedings in accordance the NYSE MKT’s Company Guide. Delisting could limit investors' ability to effect transactions in the Company's securities and subject the stock to additional trading restrictions.



The Company’s common stock is listed on the NYSE MKT, a national securities exchange. To maintain such listing, the Company is required to meet the continued listing requirements of the NYSE MKT as set forth in its Company Guide. If the Company is unable to maintain the listing of its stock on the NYSE MKT or another exchange for failure to comply with the continued listing requirements, including timely filing of Exchange Act reports and compliance with the NYSE MKT’s corporate governance requirements, the Company and its security holders could face significant material adverse consequences including a limited availability of market quotations for its stock and a decreased ability to issue additional securities or obtain additional financing in the future.



Item 1B. UNRESOLVED STAFF COMMENTS



Not applicable.



Item 2. PROPERTIES



The manufacturing facilities and offices of the Company are located in two buildings in an industrial area in Fitchburg, Massachusetts. The first building consists of an approximately 22,000 square foot, six story building. The second building is over 94,000 square feet.  Additionally, the Company owns two unoccupied buildings in the complex with a total of approximately 52,000 square feet.  The Company believes its current facilities are sufficient to meet current and future production needs through the fiscal year ending December 31, 2017.



The Company entered into an agreement with a Buyer in January 2016 for the sale of the two unoccupied buildings and land. In December 2016, the Parties agreed to an amendment extending the terms of the agreement to January 2018.  In January 2017, the Parties entered into a second amendment whereby the Buyer assigned its rights under the agreement to a third party and the Parties further agreed to extending the term to March 2018 with a further extension to July 2018 only for the purpose of allowing the assignee to secure historical tax credits.  The closing is subject to permitting and approvals from the City of Fitchburg and the Commonwealth of Massachusetts and is expected to take place no later than July 2018 (see Note 4)



Item 3. LEGAL PROCEEDINGS



In the ordinary course of its business, the Company is involved in various legal proceedings involving a variety of matters. The Company does not believe there are any pending legal proceedings that will have a material impact on the Company’s financial position or results of operations.



Item 4. MINE SAFETY DISCLOSURES



Not applicable.

11


 

PART II



Item 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES



The Company's common stock has been listed on the NYSE MKT since 1992 and trades under the ticker symbol HRT.



The following table sets forth, for the periods indicated, the high,  low and quarter end sale prices per share of common stock as quoted by the NYSE MKT.





 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

Year Ended December 31, 2016

 

High

 

Low

 

Close

1st Quarter                                      

 

$

5.45 

 

$

3.55 

 

$

4.25 

2nd Quarter                                      

 

 

4.83 

 

 

3.52 

 

 

4.40 

3rd Quarter                                      

 

 

4.68 

 

 

3.47 

 

 

4.19 

4th Quarter                                      

 

 

4.44 

 

 

3.56 

 

 

3.80 

Year Ended December 31, 2015

 

High

 

Low

 

Close

1st Quarter                                      

 

$

7.79 

 

$

6.30 

 

$

7.25 

2nd Quarter                                      

 

 

7.35 

 

 

6.04 

 

 

6.27 

3rd Quarter                                      

 

 

6.47 

 

 

5.85 

 

 

6.24 

4th Quarter                                      

 

 

6.24 

 

 

5.10 

 

 

5.48 







Holders



As of March 20, 2017 the number of holders of the Company's common stock is estimated to be in excess of 1,500, including beneficial and record holders of our common stock.



Dividend Policy



No dividends were declared or paid in 2016 or 2015. Future determination as to the payment of cash dividends, if any, will be at the discretion of the Board of Directors and will be dependent upon the Company’s financial condition, results of operations, capital requirements, potential acquisitions, and other such factors as the Board of Directors may deem relevant, including any restrictions under any credit facilities in place now or in the future.  The Company's credit facility provides that the Company shall not declare, pay or authorize any dividend without prior notification. 



Item 6. SELECTED FINANCIAL DATA



Not Applicable.

 

12


 

Item 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS



The following discussions of the Company’s results of operations and financial condition should be read in conjunction with the consolidated financial statements and notes pertaining to them that appear elsewhere in this Form 10-K. Any forward-looking statements made herein are based on current expectations of the Company that involve a number of risks and uncertainties and should not be considered as guarantees of future performance.  These statements are made under the Safe Harbor Provisions of the Private Securities Litigation Reform Act of 1995.  Forward looking statements may be identified by the use of words such as “expect,” “anticipate,” “believe,” “intend,” “plans,” “predict,” or “will”. Although the Company believes that expectations are based on reasonable assumptions, management can give no assurance that the expectations will materialize.  Many factors could cause actual results to differ materially from the Company’s forward looking statements.  These factors include those contained in more detail in Item 1A,“Risk Factors”. The Company is under no obligation and does not intend to update, revise or otherwise publicly release any revisions to these forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of any unanticipated events.



Results of Operations



The following table sets forth, for the periods indicated, the percentages of the net sales represented by certain items reflected in the Company's statements of operations.





 

 

 

 

 

 



 

 

 

 

 

 



 

Years Ended



 

December 31,



 

2016 

%

 

2015 

%

Net sales 

 

100.0 

 

 

100.0 

 

Cost of sales 

 

85.2 

 

 

85.3 

 

Gross profit 

 

14.8 

 

 

14.7 

 

Selling and marketing 

 

5.9 

 

 

5.1 

 

General and administrative 

 

11.0 

 

 

11.0 

 

Research and development 

 

0.5 

 

 

1.1 

 

Other expense

 

1.1 

 

 

1.3 

 

Loss from continuing operations before
income taxes

 

(3.7)

 

 

(3.8)

 

Income tax provision

 

 —

 

 

 —

 

Loss from continuing operations

 

(3.7)

 

 

(3.8)

 

Income from discontinued operations

 

 —

 

 

1.7 

 

Net loss

 

(3.7)

%

 

(2.1)

%



Net Sales



The Company's consolidated net sales for 2016 were $19,638,217, a decrease of $1,856,967, or 8.6%, from net sales of $21,495,184 in 2015. The decrease in net sales was due primarily to decreased net sales of orthopedic implant components and instruments as well as sensors, partially offset by an increase in net sales of thermoplastic injection molding.



The decrease in net sales was largely due to a 29.3% decrease in net sales of orthopedic implant components and instruments for the year ended December 31, 2016 due to lower than expected volume from a large customer as compared to the same period in 2015.  The Company was notified by this customer at the end of the second quarter to expect lower demand for the remainder of 2016 as the customer intended to vertically integrate by bringing the manufacturing of their orthopedic implant components in house.  Partially offsetting the decrease in demand from this customer was revenue from new orthopedic implant components and instruments customers beginning in the second quarter of 2016.    In addition, booked orders at the year ended December 31, 2016 increased when compared to the same period in 2015 from multiple new customers.



Additionally, net sales of sensors decreased 10.3% for the year ended December 31, 2016 when compared to the same period last year.  Sensor production volume increased over the same period last year, however, net sales were lower due largely to the timing of shipments, versus the recognition of revenue, related to supply agreements with certain foreign customers entered into in the third and fourth quarters of 2016.  Sensor net sales also decreased due to customer mix, product mix and competitive pricingSilver surcharge billed decreased 5.0% due in part to a  decrease in silver volume due to customer demand for lower silver content on parts.  The decrease in silver surcharge billed was partially offset by a 7.6% increase in the weighted average cost of silver as compared to the same period last year. 



13


 

The decrease in net sales was partially offset by a 6.1% increase in net sales in thermoplastic injection molding for the year ended December 31, 2016 when compared to 2015.  The increase was due to increased sales of automotive components and medical components partly offset by lower sales of military and law enforcement components when compared to the same period in 2015. 



Additionally, the decrease in net sales was partially offset by a 27.5% increase in tooling sales, net of deferred tooling revenue, due primarily to the sale of a large tool to the Company’s largest customer. 



Gross Profit



Gross profit for the year ended December 31, 2016 was $2,898,691, a decrease of $264,147, or 8.4%, from gross profit of $3,162,838 in 2015Gross profit as a percentage of net sales increased slightly to 14.8% in 2016, from 14.7% in 2015. The decrease in gross profit was due primarily to declining sales as a result of decreased order volumes in orthopedic implant components and instruments as well as in sensors. Partially offsetting these decreases were increased gross profit from thermoplastic injection molding and net tooling for the year ended December 31, 2016 when compared to 2015. 



The decrease in gross profit for the year ended December 31, 2016 when compared to 2015 was due in part to a 40.4% decrease in gross profit from orthopedic implant components and instruments largely due to lower demand as well as higher costs related to the validation of orthopedic instrumentation.  Gross profit as a percentage of sales from orthopedic implant components and instruments decreased 4.0 points due partly to lower net sales and product mix,  engineering and product validations.  The decrease was partially offset by improved efficiencies through automation.



The decrease in gross profit was also due in part to a decrease of 18.2% in gross profit from sensors due primarily to price reductions as well as customer and product mix. Gross profit as a percentage of sales from sensors decreased 1.6 points due primarily to the reduction in selling price partly offset by increased gross profit from silver surcharge due to the increase in the weighted average price of silver.



Partially offsetting the decreases in gross profit outlined above, gross profit from thermoplastic injection molding increased 4.9%  in 2016 when compared to the same period in the prior year due to customer and product mix. While gross profit increased, gross profit as a percentage of sales from thermoplastic injection molding decreased slightly due to the product mix partly offset by improved efficiencies through automation.



Also partly offsetting the decrease in gross profit for the year ended December 31, 2016 was a 31.6% increase in gross profit from tooling sales, net of deferred tooling, due primarily to the sale of a  large tool to the Company’s largest customer. 



The decrease in gross profit for the year ended December 31, 2016 was also partly offset by a decrease in expenses for other indirect manufacturing overhead departments. The lower expenses were due to adjustments made in part as a result of lower sales as well as customer mix of orthopedic implants and instruments.  Other manufacturing overhead as a percentage of sales decreased to 9.1% for the year ended December 31, 2016 as compared to 10.2% in the same period last year.



Selling and Marketing



The Company's consolidated selling and marketing expenses increased to $1,153,044, or 5.9% of net sales, in 2016 from $1,086,586, or 5.1% of net sales, in 2015;  an increase of $66,458 or 6.1%.  For the year ended December 31, 2016, the increase was primarily due to increased compensation of $265,849 as a result of two additional salespersons hired in the fourth quarter of 2015.  The increase was partially offset by an $82,463 decrease in commissions due primarily to lower sales of orthopedic implant components.  Additionally, there were no recruiting agency fees in 2016 versus $82,500 in 2015.



General and Administrative Expenses



The Company's consolidated general and administrative expenses decreased to $2,151,244, or 11.0% of net sales, in 2016 compared to $2,355,484, or 11.0% of net sales, in 2015;  a  decrease of $204,240 or 8.7%.  The decrease in general and administrative expenses is mainly due to 2015 expenses for an impairment charge of $118,318 as well as $45,000 related to merger and acquisition activities.   The decrease is also due in part to lower compensation costs of $72,596 which were due to the reduction of two positions, a  10% voluntary executive officer reduction in pay in the second quarter and no bonus expense in 2016 when compared to 2015.  Further decreases include accounting related expenses of $34,091, due in part to savings realized from new SEC filing software, a reduction of $34,847 in investor relations expense and lower consulting fees of $21,147 related to environmental, health and safety due to bringing these functions in house in 2016.



The decrease in general and administrative expenses was partially offset by $51,600 of recruiting agency fees related to the replacement of three positions in the first quarter of 2016, as well as increases in depreciation expense of $42,916 related to general and administrative assets and share-based compensation of $18,078 in 2016 versus the same period in the prior year. 



14


 

Research and Development



The Company's consolidated research and development expenses decreased to $97,234, or 0.5% of net sales in 2016, from $241,100 or 1.1% of net sales in 2015;  a decrease of $143,866, or 59.7%The net decrease is due primarily to a reduction in wages, taxes and benefits of $90,951 due primarily to turnover of one employee and a decrease of $51,206 for internal research and development costs for the development of new products and capabilities related to medical device components. 



Other Income (Expense) 



Other expense, net, was $209,631 in 2016 compared to $270,512 in 2015, a decrease of $60,881. The decreased expense is due in part to the release of a $25,000 deposit related to the sale of real estate as well as a $23,750 increase in the carrying value of the assets held for sale in 2016 (see Note 4)Interest expense was $259,762 in 2016 compared to $260,300 in 2015, a decrease of $538.  In 2015, the Company incurred $30,463 in expenses related to the assets held for sale at December 31, 2015.



Income Tax Provision



The tax provisions for the years ended December 31, 2016 and 2015 are attributable to the U.S. federal and state income taxes on our continuing operations. The Company’s combined federal and state effective income tax rate from continuing operations was 0% and 0.1% in 2016 and 2015, respectively, due to the impact of deferred tax assets reserved for with a valuation allowance.



Income from Discontinued Operations



The Company's subsidiary, RMDDxUSA Corp. and its Prince Edward Island subsidiary RMDDx Corporation (collectively "WirelessDx"), discontinued operations in 2012, filed for relief under Chapter 7 (Liquidation) of the United States Bankruptcy Code in 2014 and on March 20, 2015, the Chapter 7 Order was formally discharged and the case was closed.  In 2015, net income of $362,610 was recorded from discontinued operations as a result of the related write-off of the remaining liabilities and cumulative translation adjustment



Comprehensive Loss



In 2016 and 2015, the Company has other comprehensive loss of $0 and $42,502, respectively.  In 2016, the change in comprehensive loss was a result of the bankruptcy of RMDDxUSA Corp. (see Note 12).



Earnings Per Share



Basic and diluted loss per share from continuing operations for the year ended December 31, 2016 was $0.25 per share compared with $0.28 per share for the year ended December 31, 2015, a decrease in loss per share from continuing operations of $0.03 per share.  Consolidated basic and diluted loss per share for the year ended December 31, 2016 was $0.25 per share compared with $0.15 per share for 2015, a decrease in loss per share of $0.10 per share.   The increase in consolidated basic and diluted loss per share is due to the $0.13 earnings per share from discontinued operations in 2015. 



Off-Balance Sheet Arrangements



In 2016, the Company entered into two operating leases for office equipment. The Company’s leases require future minimum annual lease payments of $24,036 for fiscal years 2017 and 2018, respectively. 

 

Liquidity and Capital Resources



Working capital was $1,530,773 as of December 31, 2016 as compared to $2,489,175 at December 31, 2015 a decrease of $958,402.  The decrease is primarily due to the reclassification of the revolving line of credit of $1,785,795 from long-term to current liabilities because the maturity date is June 30, 2017.  The decrease in working capital is also due in part to increases in accounts payable, accrued expenses and other current liabilities and customer deposits related to tooling, as well as a decrease in accounts receivable partially offset by increased inventory, prepaid expenses and other current assets.  Working capital also benefited from the reclassification of the subordinated promissory notes from current to long-term liabilities as a result of the extension of the maturity date to December 2018 (see Note 5).   

 

Net cash provided by operating activities of continuing operations was $661,247 in 2016, as compared to net cash provided by operating activities of continuing operations of $1,469,766 in 2015.



Cash on hand was $380,381 and $272,291 at December 31, 2016, and 2015, respectively.  Substantially all of these funds are maintained in bank deposit accounts.



15


 

Trade accounts receivable, net of allowance for doubtful accounts were $2,276,608 and $2,798,353 at December 31, 2016 and December 31, 2015, respectively, a decrease of $521,745.  The decrease is primarily due to the impact of the timing of shipments versus invoicing related to supply agreements with certain foreign customers entered into in the third and fourth quarters of 2016.



Inventories were $3,060,085 at December 31, 2016 as compared to $2,118,712 at December 31, 2015, an increase of $941,373In 2016, the Company entered into supply agreements with certain foreign customers to hold inventory at customer’s warehouses.  This resulted in increased finished goods inventory for sensors as of December 31, 2016.  In addition, there is increased work in progress related to tooling orders and machining.  Raw materials for thermoplastic injection molding, namely resin, increased due to strong demand from a customer in the automotive market.



Accounts payable increased $190,873 due to the timing of disbursements for the year ended December 31, 2016 as compared to December 31, 2015 as well as increased goods received not yet invoiced.  



Capital equipment expenditures were $1,354,091 in 2016 as compared to $1,182,541 in 2015 due to the acquisition of machinery and equipment primarily for the contract manufacturing of components for orthopedic implants and instruments as well as thermoplastic injection molding.  



At December 31, 2016 the Company’s total debt, net of debt issuance costs, was $4,778,637 as compared to $3,985,838 at December 31, 2015, an increase of $792,799 or 19.7%.  The balance at December 31, 2016 was comprised of outstanding principal amounts of $2,458,331 of term debt, $1,785,795 on a revolving line of credit, $102,500 on an equipment line of credit and $432,011 of subordinated promissory notes as discussed in more detail below.



The Company has a multi-year credit facility with a Massachusetts based bank consisting of a revolving line of credit (the "revolver"), a  commercial term loan and an equipment line of credit at December 31, 2016.  The debt is secured by substantially all assets of the Company with the exception of real property.



At December 31, 2015, the credit facility included a revolver, a commercial term loan, two equipment term loans and an equipment line of credit.  In June 2016, the equipment line of credit converted to a term loan.  In November 2016, these four term loans, along with $500,000 from the revolver, were consolidated into a single commercial term loan (see Note 5).



The revolver provides for borrowings up to 80% of eligible accounts receivable and 50% of eligible raw materials inventory.  The interest rate on the revolver is calculated at the bank's prime rate plus 0.25% (4.0% at December 31, 2016). The revolver has a maturity date of June 2017. The Company expects to renew the revolver prior to its expiration.  Amounts available to borrow under the revolver are $727,156 at December 31, 2016.  



In November 2016, the Company refinanced its bank term debt, along with $500,000 from the revolver, into a new consolidated five-year term loan with a maturity date of November 2021. The interest rate on the loan is a fixed 4.65% per annum and the loan requires monthly payments of principal and interest of approximately $46,500The outstanding balance on the term loan at December 31, 2016 was $2,444,728, excluding debt issuance costs.



In November 2016, the Company entered into a new equipment line of credit for $1.0 million under the Company's multi-year credit facility. At December 31, 2016, $102,500 has been drawn on the new equipment line of credit. The term of this equipment line of credit is six years, maturing in November 2022, inclusive of a maximum one-year draw period. Repayment shall consist of monthly interest only payments, equal to the bank's prime rate plus 0.25% as to each advance commencing on the date of the loan through the earlier of: (i) one year from the date of the loan or (ii) the date upon which the equipment line of credit is fully advanced (the “Conversion Date”). On the Conversion Date, principal and interest payments will be due and payable monthly in an amount sufficient to pay the loan in full based upon an amortization schedule commensurate with the remaining term of the loan.



The bank facility contains both financial and non-financial covenants. The financial covenants include maintaining certain debt coverage and leverage ratios. The non-financial covenants relate to various matters including receiving bank approval prior to executing further borrowings or security interests, mergers or consolidations, acquisitions, guarantees, sales of assets other than in the normal course of business, leasing, changes in ownership and payment of dividends. The Company was in compliance with all bank covenants as of December 31, 2016.



In January 2013, the Company entered into two equipment notes totaling $272,500 with a financing company to acquire production equipment. The notes bear interest at 4.66% and require monthly payments of principal and interest totaling approximately $5,000 over the term of five years.  The outstanding balance of these equipment notes at December 31, 2016 was $59,461.



In December 2013, the Company completed a private offering in which the Company sold an aggregate of $500,000 in subordinated promissory notes maturing in December 2016. The unsecured notes required quarterly interest-only payments at a rate of 10% per annum for the first two years.  In  December 2015, the interest rate increased to 12% per annum.   In October 2016, the Company and six of the seven investors in the private offering, aggregating $450,000 of the notes, agreed to extend the maturity dates

16


 

of the notes to December 31, 2018 at a rate of 10% per annumOne investor did not extend the maturity date and that $50,000 note was paid at maturity in December 2016.    The notes are subordinated to all indebtedness of the Company pursuant to its multi-year bank credit facility. 



In connection with the subordinated promissory notes, the Company issued 100,000 warrants to purchase the Company's common stock. The warrants were exercisable through December 2016 at an exercise price of $3.51 per share.  In 2014, 30,000 warrants were exercised.  No warrants were exercised in 2015 or 2016.  In October 2016, in connection with the extension of the maturity dates of the subordinated promissory notes, the expiration date of the remaining 70,000 warrants was extended to December 31, 2018.  The exercise price remains unchanged at $3.51 per share.  The 70,000 warrants remain unexercised at December 31, 2016 (see Note 5).



No dividends were declared or paid in 2016 or 2015.



The Company believes that cash flows from its operations, together with its existing working capital, increased booked orders, the renewal of the revolving line of credit and other resources, will be sufficient to fund operations at current levels and repay the next twelve months of debt obligations. 



Summary of Changes in Cash Position



As of December 31, 2016, the Company had cash on hand related to continuing operations of $380,381, an increase of $108,090 from December 31, 2015.  Net cash provided by operating activities in 2016 totaled $661,247. Net cash used in investing activities in 2016 was $1,367,296. Net cash provided by financing activities in 2016 totaled $814,139. The net cash flows for the year ended December 31, 2016 are discussed in further detail below.



Operating Cash Flows



Net cash provided by operating activities in 2016 was $661,247.  Cash provided was due largely to a decrease in accounts receivable of $551,745 due primarily to the impact of supply agreements entered into with certain foreign customers in the third and fourth quarters of 2016, which require the Company to hold inventory at the customer’s warehouses.  This impacted accounts receivable due to the timing of shipments versus invoicing for these foreign customers.  Cash was also provided by an increase in accounts payable of $190,873 due to the timing of disbursements for the year ended December 31, 2016 as compared to December 31, 2015.  Additionally, decreases in other non-current assets of $112,604, and an increase in accrued expenses and other current liabilities of $38,618 provided operating cash flows.  In addition, operating activities was impacted by non-cash add-backs for depreciation and amortization of $1,541,006, share-based compensation of $47,256 and non-cash interest expense of $27,186.



Cash provided as described above was partially offset by $941,373 of cash used for an increase in inventory.  The increase in inventory was due in part to increased finished goods inventory related to sensors due to supply agreements with certain foreign customers as mentioned aboveIn addition, there is increased work in progress related to tooling orders and machining.  Raw materials for thermoplastic injection molding increased due to strong demand from a customer in the automotive market.    Operating activities was also impacted by a decrease of $30,000 in the allowance for doubtful accounts.    



Investing Cash Flows



Net cash used in investing activities in 2016 was $1,367,296 and was used for capital expenditures, largely for machinery and equipment, primarily for the contract manufacturing of orthopedic implants and instruments as well as thermoplastic injection molding equipment.  



Financing Cash Flows



Net cash provided by financing activities in 2016 was $814,139The increase in financing activities was due in part to $647,351 in proceeds from the equipment line of credit.  Additionally, proceeds of $500,000 for term debt were the result of consolidating a portion of the revolver as part of the November 2016 consolidation and refinancing of term debt.  There was also cash provided from net proceeds of $274,300 from the revolver (excluding the $500,000 above), and proceeds from the exercise of stock options provided $51,150.  These proceeds were partly offset by payments on term notes payable of $587,799,  a payment on the subordinated debt of $50,000 and $20,863 of cash paid for debt issuance costs related to the refinancing of term debt (see Note 5).  



Inflation



The Company believes that inflation in the United States or international markets has not had a significant effect on its results of operations. However, there has been considerable volatility in both energy and commodity prices, particularly the cost of silver.



17


 

Environmental Matters



Like many industrial processes, the Company's manufacturing processes utilize hazardous and non-hazardous chemicals, the treatment and disposal of which are subject to federal and state regulation.  Since its inception, the Company has expended significant funds to train its personnel, install waste treatment and recovery equipment and retain independent environmental consulting firms to regularly review, monitor and upgrade its air and waste water treatment activities.  The Company believes that the operations of its manufacturing facility are in compliance with currently applicable safety, health and environmental laws and regulations.



Based on the Company’s analysis, the Company does not expect future costs in connection with environmental matters to have a material adverse effect on its financial condition, result of operations or liquidity aside from the cost of regulatory compliance and maintaining certifications and processes related to compliance with environmental regulations.



Critical Accounting Policies



The preparation of financial statements and related disclosures in conformity with accounting principles generally accepted in the United States of America requires management to make judgments, assumptions and estimates that affect the amounts reported.  Note 2 of the Notes to Consolidated Financial Statements describes the significant accounting policies used in the preparation of the consolidated financial statements.  Some of these significant accounting policies are considered to be critical accounting policies, as defined below.



A critical accounting policy is defined as one that is both material to the presentation of the Company’s financial statements and requires management to make difficult, subjective or complex judgments that could have a material effect on the Company’s financial condition and results of operations.  Specifically, critical accounting estimates have the following attributes: 1) the Company is required to make assumptions about matters that are highly uncertain at the time of the estimate; and 2) different estimates the Company could reasonably have used, or changes in the estimate that are reasonably likely to occur, would have a material effect on the Company’s financial condition or results of operations. Estimates and assumptions about future events and their effects cannot be determined with certainty.  The Company bases its estimates on historical experience and on various other assumptions believed to be applicable and reasonable under the circumstances.  These estimates may change as new events occur, as additional information is obtained and as the Company’s operating environment changes.  These changes have historically been minor and have been included in the consolidated financial statements as soon as they became known.  In addition, management is periodically faced with uncertainties, the outcomes of which are not within its control and will not be known for prolonged periods of time.  These uncertainties are discussed in Item 1A, “Risk Factors” above. Based on a critical assessment of its accounting policies and the underlying judgments and uncertainties affecting the application of those policies, management believes that the Company’s consolidated financial statements are fairly stated in accordance with generally accepted accounting principles, and present a meaningful presentation of the Company’s financial condition and results of operations.



Management believes that the following are critical accounting policies:



Revenue Recognition



Revenue is recorded when all criteria for revenue recognition have been satisfied.  Revenue is recognized in the period when persuasive evidence of an arrangement with a customer exists, the products are shipped and title has transferred or when exclusive control has been transferred to the customer,  the price is fixed or determinable and collection is probable.    The Company has entered into supply agreements with certain foreign customers where revenue is not recognized when the product  is shipped but instead is recognized when the customer consumes the product



The Company enters into arrangements containing multiple elements which may include a combination of the sale of molds, tooling, engineering and validation services ("tooling") and production units. The Company has determined that certain tooling arrangements, and the related production units, represent one unit of accounting, based on an assessment of the respective standalone value. When the Company determines that an arrangement represents one unit of accounting, the revenue is deferred over the estimated product life-cycle, based upon historical knowledge of the customer, which is generally three years. The Company carries the sales and tooling costs, associated with the related arrangement, as deferred revenue and other current and non-current assets, respectively, on the Company's balance sheet. As the deferred revenue is amortized to sales, the associated prepaid tooling costs are amortized to cost of sales.



The Company cannot effectively predict short-term or long-term production volume in a consistent and meaningful manner due to the nature of these molds and associated products. Therefore, the Company is unable to account for the transactions under the Units of Production method and management has determined the most appropriate amortization method to be the Straight-Line method.



The Company may from time to time, at the customer's request, enter into a bill and hold arrangement. The Company evaluates the nature of the arrangement including, but not limited to (i) the customer's business purpose, (ii) the transfer of risk of

18


 

ownership to the customer and (iii) the segregation of inventory, along with other elements in accordance with the Company's revenue recognition policy and relevant accounting guidance.



Accounts Receivable and Allowance for Doubtful Accounts



Accounts receivable represent amounts invoiced by the Company. Management maintains allowance for doubtful accounts based on information obtained regarding individual accounts and historical experience. Amounts deemed uncollectible are written off against the allowance for doubtful accounts.  Bad debts have not had a significant impact on the Company’s financial position, results of operations and cash flows. 



The Company insures receivables for certain customers based upon several factors.  Such factors include the customers payment terms, ordering patterns and volume requirements, the customers payment history, or general economic conditions of the region in which a customer is located.



Inventory and Inventory Reserves



The Company values its inventory at the lower of average cost, first-in-first-out (FIFO) or net realizable value. The Company reviews its inventory for quantities in excess of production requirements, obsolescence and for compliance with internal quality specifications. A review of inventory on hand is made at least annually and obsolete inventory may be disposed of and/or recycled.  Any adjustments to inventory would be equal to the difference between the cost of inventory and the estimated net market value based upon assumptions about future demand, market conditions and expected cost to distribute those products to market.    The Company has entered into supply agreements with certain foreign customers to hold inventory at the customer’s warehouses



Deferred Tax Assets



The Company assesses the realization of its deferred tax assets based upon a more likely than not criteria.  The Company considers future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for valuation allowances.  The Company recognizes the benefits of a tax position if that position is more likely than not to be sustained on audit, based on the technical merit of the position. As of December 31, 2016, the Company has a full valuation for the Company’s deferred tax assets.



Asset Impairment – Long-Lived Assets



The Company assesses the impairment of long-lived assets and intangible assets with finite lives annually or whenever events or changes in circumstances indicate that the carrying value may not be fully recoverable. Based upon the annual review, the Company recorded impairment charges of $0  and $118,318 in 2016 and 2015, respectively.

   

In 2015, the Company reviewed unamortized costs for patents pending.  As a result of this review, the Company determined that the patents pending related to the Triggering Recharging and Wireless Transmission of Remote Patient Monitoring Device, as well as the Seed-Beat Selection Method for Signal-Averaged Electrocardiography were no longer patentable and recorded an impairment charge of $103,287 for the full costs of these patents pending.  Additionally, after a review of trade names, the Company determined that the Leominster Tool & Die name no longer provided any future economic benefit and recorded an impairment charge of $15,031 for the remaining unamortized balance of the trade names. 



 

Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK



Not Applicable.



Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA



The information required by this item may be found on pages F-1 through F-21 of this Annual Report on Form 10-K.



Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES



None.



19


 

Item 9A. CONTROLS AND PROCEDURES



Evaluation of Disclosure Controls and Procedures



As of the end of the period covered by this annual report the Company's management, with the participation of the Company's principal executive officer and principal financial officer (“the Certifying Officers”), conducted evaluations of the Company's disclosure controls and procedures as defined under Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended (the “Exchange Act”). Based upon the evaluations, the Certifying Officers have concluded that as of December 31, 2016, the Company's disclosure controls and procedures were effective.



Management’s Report on Internal Control Over Financial Reporting



The Company's Certifying Officers are responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act.



Internal control over financial reporting is a process designed by, or under the supervision of, the Certifying Officers and effected by the Company's Board of Directors, management and other personnel, to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles and includes those policies and procedures that:

·

pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of the Company's assets;

·

provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that the Company's receipts and expenditures are being made only in accordance with authorizations of the Company's management and directors; and

·

provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition or disposition of the Company's assets that could have a material effect on the financial statements.



Internal control over financial reporting cannot provide absolute assurance of achieving financial reporting objectives because of its inherent limitations.  It is a process that involves human diligence and compliance and is subject to lapses in judgment or breakdowns resulting from human failures.  Internal control over financial reporting also can be circumvented by collusion or improper management override.  While process safeguards can reduce risks, because of inherent limitations, there is a risk that material misstatements may not be prevented or detected on a timely basis.  Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.



The Company, under the supervision and with the participation of the Certifying Officers, has evaluated the effectiveness of the Company's internal control over financial reporting as of December 31, 2016 based upon the framework in Internal Control Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”). Based on such evaluations, the Certifying Officers have concluded that the Company's internal control over financial reporting was effective as of December 31, 2016.  



Changes in Internal Control Over Financial Reporting



During the three months ended December 31, 2016, there have been no changes in the Company’s internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting. 



Item 9B. OTHER INFORMATION



None.

20


 

PART III



Item 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE



The information required under this item is incorporated by reference to the applicable information set forth in the Proxy Statement for the 2016 Annual Meeting of Stockholders.



Item 11. EXECUTIVE COMPENSATION



The information required under this item is incorporated by reference to the applicable information set forth in the Proxy Statement for the 2016 Annual Meeting of Stockholders.



Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS



The information required under this item is incorporated by reference to the applicable information set forth in the Proxy Statement for the 2016 Annual Meeting of Stockholders.



Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS AND DIRECTOR INDEPENDENCE



The information required under this item is incorporated by reference to the applicable information set forth in the Proxy Statement for the 2016 Annual Meeting of Stockholders.



Item 14. PRINCIPAL ACCOUNTING FEES AND SERVICES



The information required under this item is incorporated by reference to the applicable information set forth in the Proxy Statement for the 2016 Annual Meeting of Stockholders.



PART IV



Item 15. EXHIBITS AND FINANCIAL STATEMENT SCHEDULES



We have filed the following documents as part of this report:



1. Consolidated Financial Statements



 



 



Report of Independent Registered Public Accounting Firm



Consolidated Financial Statements:



Balance sheets



Statements of operations and comprehensive income (loss)



Statements of changes in shareholders' equity



Statements of cash flows



Notes to consolidated financial statements



2. Financial Statement Schedules



Schedules have been omitted because they are not required, not applicable, or the required information is otherwise included.



3. Exhibits



The Company hereby furnishes the exhibits listed on the attached exhibit index.  Exhibits, which are incorporated herein by reference, may be inspected and copied at the public reference facilities maintained by the SEC at Room 1580, Washington, D.C. 20549.  Copies of such material may be obtained by mail from the Public Reference Section of the SEC at 100 F Street, N.E., Washington, D.C. 20549, at prescribed rates.  The SEC also maintains a website that contains reports, proxy and information statements and other information regarding registrants that file electronically with the SEC at http://www.sec.gov.  The Company maintains a web site that contains reports, proxy and information statements and other information electronically at the address http://www.arthrt.com.  Information on our website is not a part of this Annual Report on Form 10-K.



Item 16.  FORM 10-K SUMMARY



Not applicable.

21


 

SIGNATURES



Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.





ARRHYTHMIA RESEARCH TECHNOLOGY, INC.





 

 

 

By:

/s/ 

Salvatore Emma, Jr.

 



 

Salvatore Emma, Jr.,

 



 

President,  Chief Executive Officer

 



 

March 22, 2017

 



Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.







 

 

 

 

Signature

 

Capacity

 

Date



 

 

 

 

/s/ Salvatore Emma, Jr.

 

President, Chief Executive Officer and Director

 

March 22, 2017

Salvatore Emma, Jr.

 

(principal executive officer)

 

 



 

 

 

 

/s/ Derek T. Welch

 

Chief Financial Officer, Treasurer and Secretary

 

March 22, 2017

Derek T. Welch

 

(principal financial and accounting officer)

 

 



 

 

 

 

/s/ Jason R. Chambers

 

Chairman of the Board

 

March 22, 2017

Jason R. Chambers

 

 

 

 



 

 

 

 

/s/ Marco F. Benedetti

 

Director

 

March 22, 2017

Marco F. Benedetti

 

 

 

 



 

 

 

 

/s/ E. P. Marinos

 

Director

 

March 22, 2017

E. P. Marinos

 

 

 

 



 

 

 

 

/s/ Robert A. Mello

 

Director

 

March 22, 2017

Robert A. Mello

 

 

 

 



 

 

 

 

/s/ Paul F. Walter, MD

 

Director

 

March 22, 2017

Paul F. Walter, MD

 

 

 

 



 

 

 

 





 

22


 

EXHIBIT INDEX







 

 

 

 

Exhibit Number

 

Description of Exhibit

 

Page

3.0

 

Certificate of Incorporation (incorporated by reference to the Company’s Registration Statement on Form S-18 as filed with the Commission in April 1988, Registration Statement No. 33-20945-FW).

 

 

3.1

 

Amended and Restated By-laws (incorporated by reference to Exhibit 3.2 to the Company’s Current Report on Form 8-K as filed with the Commission on July 1, 2011).

 

 

3.2

 

Certificate of Amendment of Certificate of Incorporation (incorporated by reference to Exhibit 3.2 to the Company’s Quarterly Report on Form 10-Q as filed with the Commission on August 13, 2015).

 

 

3.3

 

Certificate of Amendment of Certificate of Incorporation (incorporated by reference to Exhibit 4.1 to the Company's Report on Form 8-K as filed with the Commission on March 14, 2017).

 

 

4.0

 

Form of Certificate evidencing shares of the Company's Common Stock (incorporated by reference to the Company’s Registration Statement on Form S-18 as filed with the Commission in April 1988, Registration Statement No. 33-20945-FW).

 

 

4.6(1)

 

2001 Stock Option Plan (incorporated by reference to Exhibit 99.6 to the Company’s Annual Report on Form 10-KSB for fiscal year ended December 31, 2001 as filed with the Commission on March 29, 2002).

 

 

4.10(1)

 

2010 Equity Incentive Plan (incorporated by reference to Exhibit 4.1 to the Company’s Registration Statement on Form S-8 as filed with the Commission on May 6, 2010, Registration Statement No. 333-166600).

 

 

4.11

 

Form of Subordinated Note (incorporated by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K as filed with the Commission on December 23, 2013).

 

 

4.12

 

Form of Subordination Agreement (incorporated by reference to Exhibit 4.2 to the Company’s Current Report on Form 8-K as filed with the Commission on December 23, 2013)

 

 

4.13

 

Form of Warrant to Purchase Common Stock (incorporated by reference to Exhibit 4.3 to the Company’s Current Report on Form 8-K as filed with the Commission on December 23, 2013).

 

 

4.14

 

Form of Amended and Restated Subordinated Promissory Note (incorporated by reference to Exhibit 4.1 to the Company’s Current Report on Form 8-K as filed with the Commission on October 17, 2016).

 

 

4.15

 

Form of Amendment No. 1 to Warrant to Purchase Shares of Common Stock (incorporated by reference to Exhibit 4.3 to the Company’s Current Report on Form 8-K as filed with the Commission on October 17, 2016).

 

 

10.51

 

Loan and Security Agreement between UniBank for Savings and Arrhythmia Research Technology, Inc. and Micron Products, Inc. dated March 29, 2013 (incorporated by reference to Exhibit 10.51 to the Company’s Quarterly Report on Form 10-Q as filed with the Commission on July 1, 2013).

 

 

10.58

 

Third Amendment to Loan and Security Agreement and Commercial Equipment Line of Credit Promissory Note dated June 26, 2014 (incorporated by reference to Exhibit 10.58 to the Company’s Quarterly Report on Form 10-Q as filed with the Commission on August 7, 2014).

 

 

10.59(1)

 

Employment Agreement between the Company and Salvatore Emma, Jr. dated as of January 20, 2015 (incorporated by reference to Exhibit 10.59 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2014 as filed with the Commission on March 20, 2015).

 

 

10.60(1)

 

Employment Agreement between the Company and Derek T. Welch dated as of January 20, 2015 (incorporated by reference to Exhibit 10.60 to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2014 as filed with the Commission on March 20, 2015).

 

 

10.61

 

Fourth Amendment to Loan and Security Agreement and Commercial Equipment Line of Credit Promissory Note dated June 19, 2015 (incorporated by reference to Exhibit 10.61 to the Company’s Quarterly Report on Form 10-Q as filed with the Commission on August 13, 2015).

 

 

10.62**

 

Fifth Amendment to Loan and Security Agreement dated as of November 15, 2016

 

X-1

10.63**

 

Commercial Term Promissory Note dated November 15, 2016

 

X-2

10.64**

 

Commercial Equipment Line of Credit Promissory Note dated November 15, 2016

 

X-3

10.65(1)

 

Executive Incentive Plan (incorporated by reference to Exhibit 10.1 to the Company’s Current Report on Form 8-K as filed with the Commission on December 6, 2016).

 

 

10.66(1)**

 

Employment Agreement between the Company and Salvatore Emma, Jr. dated as of January 1, 2017.

 

X-4

10.67(1)**

 

Employment Agreement between the Company and Derek T. Welch dated as of January 1, 2017.

 

X-5

21

 

Subsidiaries (incorporated by reference to Exhibit 21.0 to the Company’s Annual Report on Form 10-K for fiscal year ended December 31, 2010 as filed with the Commission on March 23, 2011).

 

 

23


 

23.1**

 

Consent of Wolf & Company, P.C.

 

X-6

31.1**

 

Certification of the CEO pursuant to Rule 13a-14(a) or Rule 15(d)-14(a)

 

X-7

31.2**

 

Certification of the CFO pursuant to Rule 13a-14(a) or Rule 15(d)-14(a)

 

X-8

32.1**

 

Certification of the CEO pursuant to 18 U.S.C. §1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

X-9

32.2**

 

Certification of the CFO pursuant to 18 U.S.C. §1350 as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

X-10

101.INS†

 

XBRL Instance Document

 

 

101.SCH†

 

XBRL Taxonomy Extension Schema Document

 

 

101.CAL†

 

XBRL Taxonomy Extension Calculation Linkbase Document

 

 

101.PRE†

 

XBRL Taxonomy Extension Presentation Linkbase Document

 

 

101.DEF†

 

XBRL Taxonomy Extension Definition Linkbase Document

 

 

(1) Indicates a management contract or compensatory plan required to be filed as an exhibit.

**Filed herewith

† XBRL (Extensible Business Reporting Language) information is furnished and not filed or a part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.

 



 

24


 

Arrhythmia Research Technology, Inc.

and Subsidiaries



Contents





 

F-1


 

Report of Independent Registered Public Accounting Firm





To the Board of Directors and Shareholders

Arrhythmia Research Technology, Inc.





We have audited the accompanying consolidated balance sheets of Arrhythmia Research Technology, Inc. and its subsidiaries (collectively the “Company”) as of December 31, 2016 and 2015 and the related consolidated statements of operations and comprehensive loss, changes in shareholders’ equity and cash flows for the years then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.



We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.



In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Arrhythmia Research Technology, Inc. and its subsidiaries as of December 31, 2016 and 2015, and the results of its operations and its cash flows for the years then ended, in conformity with U.S. generally accepted accounting principles.





/s/ WOLF & COMPANY, P.C.





Boston, Massachusetts

March 22, 2017 



 

F-2


 

Arrhythmia Research Technology, Inc. and Subsidiaries

Consolidated Balance Sheets







 

 

 

 

 

 



 

 

 

 

 

 



 

December 31,

 

December 31,



 

2016

 

2015

Assets

 

 

 

 

 

 

Current assets:

 

 

 

 

 

 

Cash and cash equivalents

 

$

380,381 

 

$

272,291 

Trade accounts receivable, net of allowance for doubtful accounts of $30,000 at December 31, 2016 and $60,000 at December 31, 2015

 

 

2,276,608 

 

 

2,798,353 

Inventories

 

 

3,060,085 

 

 

2,118,712 

Prepaid expenses and other current assets

 

 

614,362 

 

 

593,716 

Total current assets

 

 

6,331,436 

 

 

5,783,072 

Property, plant and equipment, net

 

 

6,440,911 

 

 

6,626,069 

Assets held for sale, net

 

 

688,750 

 

 

665,000 

Intangible assets, net

 

 

30,093 

 

 

18,645 

Other assets

 

 

156,231 

 

 

243,319 

Total assets

 

$

13,647,421 

 

$

13,336,105 

Liabilities and Shareholders’ Equity

 

 

 

 

 

 

Current liabilities:

 

 

 

 

 

 

Revolving line of credit, current portion

 

$

1,785,795 

 

$

 —

Equipment line of credit, current portion

 

 

102,500 

 

 

35,718 

Term notes payable, current portion, net of debt issuance costs

 

 

487,468 

 

 

589,635 

Subordinated promissory notes, net of discount

 

 

 —

 

 

473,135 

Accounts payable

 

 

1,744,261 

 

 

1,553,388 

Accrued expenses and other current liabilities

 

 

333,361 

 

 

275,777 

Customer deposits

 

 

122,290 

 

 

93,407 

Deferred revenue, current

 

 

224,988 

 

 

272,837 

Total current liabilities

 

 

4,800,663 

 

 

3,293,897 

Long-term liabilities:

 

 

 

 

 

 

Revolving line of credit, non-current portion

 

 

 —

 

 

1,511,495 

Equipment line of credit, non-current portion

 

 

 —

 

 

301,132 

Term notes payable, non-current portion, net of debt issuance costs

 

 

1,970,863 

 

 

1,074,723 

Subordinated promissory notes, net of discount

 

 

432,011 

 

 

 —

Deferred revenue, non-current

 

 

156,953 

 

 

272,181 

Total long-term liabilities

 

 

2,559,827 

 

 

3,159,531 

Total liabilities

 

 

7,360,490 

 

 

6,453,428 

Commitments and Contingencies

 

 

 

 

 

 

Shareholders’ equity:

 

 

 

 

 

 

Preferred stock, $0.001 par value; 2,000,000 shares authorized, none issued

 

 

 —

 

 

 —

Common stock, $0.01 par value; 10,000,000 shares authorized; 3,926,491 issued, 2,820,999 outstanding at December 31, 2016 and 3,926,491 issued, 2,801,639 outstanding at December 31, 2015

 

 

39,265 

 

 

39,265 

Additional paid-in-capital

 

 

11,457,320 

 

 

11,381,536 

Treasury stock at cost, 1,105,492 shares at December 31, 2016 and 1,124,852 shares at December 31, 2015

 

 

(3,028,564)

 

 

(3,069,496)

Accumulated deficit

 

 

(2,181,090)

 

 

(1,468,628)

Total shareholders’ equity

 

 

6,286,931 

 

 

6,882,677 

Total liabilities and shareholders’ equity

 

$

13,647,421 

 

$

13,336,105 



See accompanying notes to consolidated financial statements.

 

F-3


 

Arrhythmia Research Technology, Inc. and Subsidiaries

Consolidated Statements of Operations and Comprehensive Loss







 

 

 

 

 



 

 

 

 

 



Years Ended



December 31,



2016

 

2015

Net sales

$

19,638,217 

 

$

21,495,184 

Cost of sales

 

16,739,526 

 

 

18,332,346 

Gross profit

 

2,898,691 

 

 

3,162,838 



 

 

 

 

 

Selling and marketing

 

1,153,044 

 

 

1,086,586 

General and administrative

 

2,151,244 

 

 

2,355,484 

Research and development

 

97,234 

 

 

241,100 

Total operating expenses

 

3,401,522 

 

 

3,683,170 



 

 

 

 

 

Net loss from continuing operations

 

(502,831)

 

 

(520,332)

Other expense:

 

 

 

 

 

Interest expense

 

(259,762)

 

 

(260,300)

Other income (expense), net

 

50,131 

 

 

(10,212)

Total other expense, net

 

(209,631)

 

 

(270,512)

Loss from continuing operations before income taxes

 

(712,462)

 

 

(790,844)

Income tax provision

 

 —

 

 

932 

Loss from continuing operations

 

(712,462)

 

 

(791,776)

Discontinued Operations:

 

 

 

 

 

Income from discontinued operations, net of tax provision of $0 for the years ended December 31, 2016 and 2015

 

 —

 

 

362,610 

Net loss

$

(712,462)

 

$

(429,166)

Other comprehensive loss:

 

 

 

 

 

      Reclassification of gains from foreign currency translation

 

 —

 

 

(42,502)

Comprehensive loss

$

(712,462)

 

$

(471,668)

Earnings (loss) per share - basic

 

 

 

 

 

Continuing operations

$

(0.25)

 

$

(0.28)

Discontinued operations

 

 —

 

 

0.13 

Earnings (loss) per share - basic

$

(0.25)

 

$

(0.15)

Earnings (loss) per share - diluted

 

 

 

 

 

Continuing operations

$

(0.25)

 

$

(0.28)

Discontinued operations

 

 —

 

 

0.13 

Earnings (loss) per share - diluted

$

(0.25)

 

$

(0.15)

Weighted average common shares outstanding - basic

 

2,816,516 

 

 

2,784,757 

Weighted average common shares outstanding - diluted

 

2,816,516 

 

 

2,784,757 



 

 

 

 

 





See accompanying notes to consolidated financial statements.

 





F-4


 

Arrhythmia Research Technology, Inc. and Subsidiaries 

Consolidated Statements of Changes in Shareholders' Equity







 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

 

 

 

 

 

 

 

 

 

 

 

 

Accumulated

 

 

 

 

 



 

 

 

 

 

 

Additional

 

 

 

 

 

 

other

 

 

 

 

 



 

Common Stock

 

paid-in

 

 Treasury stock

 

comprehensive

 

Accumulated

 

 

 



 

Shares

 

Amount

 

capital

 

Shares

 

Amount

 

income

 

deficit

 

Total

December 31, 2014

 

3,926,491 

 

$

39,265 

 

$

11,336,693 

 

1,148,152 

 

$

(3,133,883)

 

$

42,502 

 

$

(1,039,462)

 

$

7,245,115 

Accumulated comprehensive income from unrealized gains and losses in currency translation

 

 

 

 

 

 

 

(51)

 

 

 

 

 

 

 

(42,502)

 

 

 

 

 

(42,553)

Share-based compensation
- options

 

 

 

 

 

 

 

29,178 

 

 

 

 

 

 

 

 

 

 

 

 

 

29,178 

Issuance of common stock
from treasury

 

 

 

 

 

 

 

15,716 

 

(23,300)

 

 

64,387 

 

 

 

 

 

 

 

 

80,103 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(429,166)

 

 

(429,166)

December 31, 2015

 

3,926,491 

 

$

39,265 

 

$

11,381,536 

 

1,124,852 

 

$

(3,069,496)

 

$

 —

 

$

(1,468,628)

 

$

6,882,677 

Share-based compensation
- options

 

 

 

 

 

 

 

47,256 

 

 

 

 

 

 

 

 

 

 

 

 

 

47,256 

Change in the incremental fair value of warrants

 

 

 

 

 

 

 

18,310 

 

 

 

 

 

 

 

 

 

 

 

 

 

18,310 

Issuance of common stock
from treasury

 

 

 

 

 

 

 

10,218 

 

(15,000)

 

 

40,932 

 

 

 

 

 

 

 

 

51,150 

Net loss

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(712,462)

 

 

(712,462)

December 31, 2016

 

3,926,491 

 

$

39,265 

 

$

11,457,320 

 

1,109,852 

 

$

(3,028,564)

 

$

 —

 

$

(2,181,090)

 

$

6,286,931 



See accompanying notes to consolidated financial statements.

 

F-5


 

Arrhythmia Research Technology, Inc. and Subsidiaries

Consolidated Statements of Cash Flows

 





 

 

 

 

 

 



 

 

 

 

 

 



 

Years Ended



 

December 31,



 

2016

 

2015

Cash flows from operating activities:

 

 

 

 

 

 

Net loss

 

$

(712,462)

 

$

(429,166)

Income from discontinued operations

 

 

 —

 

 

(362,610)

Adjustments to reconcile net loss to net cash provided by (used in)
operating activities:

 

 

 

 

 

 

Loss on sale of property, plant and equipment

 

 

 —

 

 

13,320 

Change in fair value of assets held for sale

 

 

(23,750)

 

 

 —

Depreciation and amortization

 

 

1,541,006 

 

 

1,464,588 

Impairment of intangibles

 

 

 —

 

 

118,318 

Non-cash interest expense

 

 

27,186 

 

 

27,683 

Change in allowance for doubtful accounts

 

 

(30,000)

 

 

15,000 

Share-based compensation expense

 

 

47,256 

 

 

29,178 

Changes in operating assets and liabilities:

 

 

 

 

 

 

Accounts receivable

 

 

551,745 

 

 

723,394 

Inventories

 

 

(941,373)

 

 

395,529 

Prepaid expenses and other current assets

 

 

(25,228)

 

 

(94,547)

Other non-current assets

 

 

112,604 

 

 

301,522 

Accounts payable

 

 

190,873 

 

 

(303,768)

Accrued expenses and other current liabilities

 

 

38,618 

 

 

(90,426)

Other non-current liabilities

 

 

(115,228)

 

 

(338,249)

Net cash provided by (used in) operating activities

 

 

661,247 

 

 

1,469,766 

Cash flows from investing activities:

 

 

 

 

 

 

Purchases of property, plant and equipment

 

 

(1,354,091)

 

 

(1,182,541)

Proceeds from sale of property, plant and equipment

 

 

 —

 

 

35,700 

Cash paid for patents and trademarks

 

 

(13,205)

 

 

(6,176)

Net cash provided by (used in) investing activities

 

 

(1,367,296)

 

 

(1,153,017)

Cash flows from financing activities:

 

 

 

 

 

 

Proceeds from (payments on) revolving line of credit, net

 

 

274,300 

 

 

(560,000)

Proceeds from equipment line of credit

 

 

647,351 

 

 

752,635 

Proceeds from term note payable

 

 

500,000 

 

 

 —

Payments on term notes payable

 

 

(587,799)

 

 

(526,594)

Payment of debt issuance costs

 

 

(20,863)

 

 

 —

Payment on subordinated debt

 

 

(50,000)

 

 

 —

Proceeds from stock option exercises

 

 

51,150 

 

 

80,103 

Net cash provided by (used in) financing activities

 

 

814,139 

 

 

(253,856)

Net increase (decrease) in cash and cash equivalents

 

 

108,090 

 

 

62,893 

Cash and cash equivalents, beginning of period

 

 

272,291 

 

 

209,398 

Cash and cash equivalents, end of period

 

$

380,381 

 

$

272,291 



See accompanying notes to consolidated financial statements.

 

F-6


 

Arrhythmia Research Technology, Inc. and Subsidiaries

Consolidated Statements of Cash Flows Supplemental Information







 

 

 

 

 

 



 

 

 

 

 

 



 

Years Ended



 

December 31,

Supplemental Cash Flow Information

 

2016