Overview

Zimmer Biomet is a global leader in musculoskeletal healthcare. We design, manufacture and market orthopaedic reconstructive products; sports medicine, biologics, extremities and trauma products; office based technologies; spine, craniomaxillofacial and thoracic products; dental implants; and related surgical products. We collaborate with healthcare professionals around the globe to advance the pace of innovation. Our products and solutions help treat patients suffering from disorders of, or injuries to, bones, joints or supporting soft tissues. Together with healthcare professionals, we help millions of people live better lives. In this report, “Zimmer Biomet,” “we,” “us,” “our,” “the Company” and similar words refer collectively to Zimmer Biomet Holdings, Inc. and its subsidiaries. “Zimmer Biomet Holdings” refers to the parent company only.

Zimmer Biomet Holdings was incorporated in Delaware in 2001. Our history dates to 1927, when Zimmer Manufacturing Company, a predecessor, was founded in Warsaw, Indiana. On August 6, 2001, we were spun off from our former parent and became an independent public company.

On June 24, 2015 (the “Closing Date”), we acquired LVB Acquisition, Inc. (“LVB”), the parent company of Biomet, Inc. (“Biomet”), and LVB and Biomet became our wholly-owned subsidiaries (sometimes hereinafter referred to as the “Biomet merger” or the “merger”). In connection with the merger, we changed our name from Zimmer Holdings, Inc. to Zimmer Biomet Holdings, Inc. “Zimmer” used alone refers to the business or information of us and our subsidiaries on a stand-alone basis without inclusion of the business or information of LVB or any of its subsidiaries.

Customers, Sales and Marketing

Our primary customers include orthopaedic surgeons, neurosurgeons, oral surgeons, and other specialists, dentists, hospitals, stocking distributors, healthcare dealers and, in their capacity as agents, healthcare purchasing organizations or buying groups. These customers range from large multinational enterprises to independent clinicians and dentists.

We have operations throughout the world. We manage our operations through three major geographic operating segments and four product category operating segments. Our three major geographic operating segments are the Americas, which is comprised principally of the U.S. and includes other North, Central and South American markets; EMEA, which is comprised principally of Europe and includes the Middle East and African markets; and Asia Pacific, which is comprised primarily of Japan and includes other Asian and Pacific markets. Our four product category operating segments, which are individually not as significant as our geographic operating segments, are as follows: 1) Americas Spine; 2) Office Based Technologies; 3) Craniomaxillofacial and Thoracic (“CMF”); and 4) Dental.

We market and sell products through three principal channels: 1) direct to healthcare institutions, such as hospitals, referred to as direct channel accounts; 2) through stocking distributors and healthcare dealers; and 3) directly to dental practices and dental laboratories. With direct channel accounts, inventory is generally consigned to sales agents or customers. With sales to stocking distributors, healthcare dealers, dental practices and dental laboratories, title to product passes upon shipment or upon implantation of the product. Direct channel accounts represented approximately 80 percent of our net sales in 2016. No individual direct channel account, stocking distributor, healthcare dealer, dental practice or dental laboratory accounted for more than 1 percent of our net sales for 2016.

We stock inventory in our warehouse facilities and retain title to consigned inventory in an effort to have sufficient quantities available when products are needed for surgical procedures. Safety stock levels are determined based on a number of factors, including demand, manufacturing lead times and quantities required to maintain service levels. We also carry trade accounts receivable balances based on credit terms that are generally consistent with local market practices.

We utilize a network of sales associates, sales managers and support personnel, some of whom are employed or contracted by independent distributors and sales agencies. We invest a significant amount of time and expense in training sales associates in how to use specific products and how to best inform surgeons of product features and uses. Sales force representatives must have strong technical selling skills and medical education to provide technical support for surgeons.

In response to the different healthcare systems throughout the world, our sales and marketing strategies and organizational structures differ by region. We utilize a global approach to sales force training, marketing and medical education to provide consistent, high quality service. Additionally, we keep current with key surgical developments and other issues related to orthopaedic surgeons, neurosurgeons, other specialists, dentists and oral surgeons and the medical procedures they perform.

We allocate resources to achieve our operating profit goals through seven operating segments. Our operating segments are comprised of both geographic and product category business units. We are organized through a combination of geographic and product category operating segments for various reasons, including the distribution channels through which products are sold. Our product category operating segments generally have distribution channels focused specifically on those product categories, whereas our geographic operating segments have distribution channels that sell multiple product categories. The following is a summary of our seven operating segments. See Note 18 to the consolidated financial statements for more information regarding our segments.

Americas.    The Americas geographic operating segment is our largest operating segment. The U.S. accounts for 93 percent of net sales in this region. The U.S. sales force consists of a combination of employees and independent sales agents, most of whom sell products exclusively for Zimmer Biomet. The sales force in the U.S. receives a commission on product sales and is responsible for many operating decisions and costs.

In this region, we contract with group purchasing organizations and managed care accounts and have promoted unit growth by offering volume discounts to customer healthcare institutions within a specified group. Generally, we are designated as one of several preferred purchasing sources for specified products, although members are not obligated to purchase our products. Contracts with group purchasing organizations generally have a term of three years, with extensions as warranted.

In the Americas, we monitor and rank independent sales agents and our direct sales force across a range of performance metrics, including the achievement of sales targets and maintenance of efficient levels of working capital.

EMEA.    The EMEA geographic operating segment is our second largest operating segment. France, Germany, Italy, Spain and the United Kingdom collectively account for 57 percent of net sales in the region. This segment also includes other key markets, including Switzerland, Benelux, Nordic, Central and Eastern Europe, the Middle East and Africa. Our sales force in this segment is comprised of direct sales associates, commissioned agents, independent distributors and sales support personnel. We emphasize the advantages of our clinically proven, established designs and innovative solutions and new and enhanced materials and surfaces. In most European countries, healthcare is sponsored by the government and therefore government budgets impact healthcare spending, which can affect our sales in this segment.

Asia Pacific.    The Asia Pacific geographic operating segment includes key markets such as Japan, Australia, New Zealand, Korea, China, Taiwan, India, Thailand, Singapore, Hong Kong and Malaysia. Japan is the largest market within this segment, accounting for 44 percent of the region’s sales. In Japan and most countries in the Asia Pacific region, we maintain a network of dealers, who act as order agents on behalf of hospitals in the region, and sales associates, who build and maintain relationships with orthopaedic surgeons and neurosurgeons in their markets. The knowledge and skills of these sales associates play a critical role in providing service, product information and support to surgeons. We have a research and development center in Beijing, China, which focuses on products and technologies designed to meet the unique needs of Asian patients and their healthcare providers.

Americas Spine.    The Americas Spine product category operating segment is comprised of our spine products division in the Americas, primarily in the U.S. market, but also in other North, Central and South American markets. The market dynamics of the Americas Spine business are similar to those described in the Americas geographic operating segment. However, the Americas Spine business maintains a separate sales force of employees and independent sales agents.

Office Based Technologies.    Our Office Based Technologies product category operating segment only sells to U.S. customers. In this product category, we market our products to doctors who prescribe them for use by patients. The products are mostly provided directly by Zimmer Biomet to patients and are paid for through patients’ insurance or by patients themselves. Products are also sold through wholesale channels on a limited basis.

CMF.    Our CMF product category operating segment competes across the world through a combination of direct and independent sales agents. The U.S. sales force consists of a combination of employees and independent sales agents. Internationally, our primary customers are independent stocking distributors who market our products to their customers.

Dental.    Our Dental product category operating segment competes across the world. Our sales force is primarily composed of employees who market our products to customers. We sell directly to dental practices or dental laboratories, or to independent stocking distributors depending on the market.

Seasonality

Our business is seasonal in nature to some extent, as many of our products are used in elective procedures, which typically decline during the summer months and can increase at the end of the year once annual deductibles have been met on health insurance plans.

Distribution

We distribute our products both through large, centralized warehouses and through smaller, market specific facilities, depending on the needs of the market. We maintain large, centralized warehouses in the U.S. and Europe to be able to efficiently distribute our products to customers in those regions. In addition to these centralized warehouses, we maintain smaller distribution facilities within each of the countries where we have a direct sales presence. In many locations, our inventory is consigned to the healthcare institution.

We generally ship our orders via expedited courier. We do not consider our back orders of firm orders to be material to an understanding of our business.

Products

Our products include orthopaedic reconstructive products; sports medicine, biologics, extremities and trauma products; office based technologies, spine and CMF products; dental implants; and related surgical products.

KNEES

Total knee replacement surgeries typically include a femoral component, a patella (knee cap), a tibial tray and an articular surface (placed on the tibial tray). Knee replacement surgeries include first-time, or primary, joint replacement procedures and revision procedures for the replacement,

repair or enhancement of an implant or component from a previous procedure. There are also procedures for partial reconstruction of the knee, which treat limited knee degeneration and involve the replacement of only one side, or compartment, of the knee with a unicompartmental knee prosthesis. Our knee portfolio also includes early intervention and joint preservation products, which seek to preserve the joint by repairing or regenerating damaged tissues and by treating osteoarthritis.

Our significant knee brands include the following:

HIPS

Total hip replacement surgeries replace both the head of the femur and the socket portion of the pelvis (acetabulum) of the natural hip. Hip procedures include first-time, or primary, joint replacement as well as revision procedures. Hip implant procedures involve the use of bone cement to attach or affix the prosthetic components to the surrounding bone, or are press-fit into bone, which means that they have a surface that bone affixes to through either ongrowth or ingrowth technologies.

Our significant hip brands include the following:

S.E.T.

Our S.E.T. product category includes surgical, sports medicine, biologics, foot and ankle, extremities and trauma products. Our surgical products are used to support various surgical procedures. Our sports medicine products are primarily for the repair of soft tissue injuries, most commonly used in the knee and shoulder. Our biologics products are used as early intervention for joint preservation or to support surgical procedures. Our foot and ankle and extremities products are designed to treat arthritic conditions and fractures in the foot, ankle, shoulder, elbow and wrist. Our trauma products are used to stabilize damaged or broken bones and their surrounding tissues to support the body’s natural healing process.

Our significant S.E.T. brands include the following:

¹ Registered trademark of Seikagaku Corporation

SPINE and CMF

Our spine products division designs, manufactures and distributes medical devices and surgical instruments to deliver comprehensive solutions for individuals with back or neck pain caused by degenerative conditions, deformities or traumatic injury of the spine. Our CMF division includes face and skull reconstruction products as well as products that fixate and stabilize the bones of the chest in order to facilitate healing or reconstruction after open heart surgery, trauma or for deformities of the chest.

Our significant spine and CMF brands include the following:

DENTAL

Our dental products division manufactures and/or distributes: 1) dental reconstructive implants – for individuals who are totally without teeth or are missing one or more teeth; 2) dental prosthetic products – aimed at providing a more natural restoration to resemble the original teeth; and 3) dental regenerative products – for soft tissue and bone rehabilitation.

Our significant dental brands include the following:

OTHER

Our other product category primarily includes our bone cement and office based technology products. Our significant brands include the following:

Research and Development

We have extensive research and development activities to develop new surgical techniques, materials, biologics and product designs. The research and development teams work closely with our strategic brand marketing function. The rapid commercialization of innovative new materials, biologics products, implant and instrument designs and surgical techniques remains one of our core strategies and continues to be an important driver of sales growth.

We are broadening our offerings in each of our product categories and exploring new technologies with possible applications in multiple areas. Our primary research and development facility is located in Warsaw, Indiana. We have other research and development personnel based in, among other places, Canada, China, France, Switzerland and other U.S. locations. As of December 31, 2016, we employed approximately 2,000 research and development employees worldwide.

² Registered trademark of Heraeus Medical GmbH

We expect to continue to identify innovative technologies, which may include acquiring complementary products or businesses, establishing technology licensing arrangements or strategic alliances.

Government Regulation and Compliance

We are subject to government regulation in the countries in which we conduct business. In the U.S., numerous laws and regulations govern all the processes by which medical devices are brought to market. These include, among others, the Federal Food, Drug and Cosmetic Act and regulations issued or promulgated thereunder. The U.S. Food and Drug Administration (“FDA”) has enacted regulations that control all aspects of the development, manufacture, advertising, promotion and postmarket surveillance of medical products, including medical devices. In addition, the FDA controls the access of products to market through processes designed to ensure that only products that are safe and effective are made available to the public.

Most of our new products fall into an FDA classification that requires the submission of a Premarket Notification (510(k)) to the FDA. This process requires us to demonstrate that the device to be marketed is at least as safe and effective as, that is, substantially equivalent to, a legally marketed device. We must submit information that supports our substantial equivalency claims. Before we can market the new device, we must receive an order from the FDA finding substantial equivalence and clearing the new device for commercial distribution in the U.S.

Other devices we develop and market are in a category (class) for which the FDA has implemented stringent clinical investigation and Premarket Approval (“PMA”) requirements. The PMA process requires us to provide clinical and laboratory data that establishes that the new medical device is safe and effective. The FDA will approve the new device for commercial distribution if it determines that the data and information in the PMA application constitute valid scientific evidence and that there is reasonable assurance that the device is safe and effective for its intended use(s).

All of our devices marketed in the U.S. have been cleared or approved by the FDA, with the exception of some devices which are exempt or were in commercial distribution prior to May 28, 1976. The FDA has grandfathered these devices, so new FDA submissions are not required.

Both before and after a product is commercially released, we have ongoing responsibilities under FDA regulations. The FDA reviews design and manufacturing practices, labeling and record keeping, and manufacturers’ required reports of adverse experiences and other information to identify potential problems with marketed medical devices. We are also subject to periodic inspection by the FDA for compliance with its Quality System Regulation (21 CFR Part 820) (“QSR”), among other FDA requirements, such as restrictions on advertising and promotion. Our manufacturing operations, and those of our third-party manufacturers, are required to comply with the QSR, which addresses a company’s responsibility for product design, testing and manufacturing quality assurance and the

maintenance of records and documentation. The QSR requires that each manufacturer establish a quality system by which the manufacturer monitors the manufacturing process and maintains records that show compliance with FDA regulations and the manufacturer’s written specifications and procedures relating to the devices. QSR compliance is necessary to receive and maintain FDA clearance or approval to market new and existing products. The FDA makes announced and unannounced periodic and on-going inspections of medical device manufacturers to determine compliance with the QSR. If in connection with these inspections the FDA believes the manufacturer has failed to comply with applicable regulations and/or procedures, it may issue inspectional observations on Form 483 that would necessitate prompt corrective action. If FDA inspectional observations are not addressed and/or corrective action is not taken in a timely manner and to the FDA’s satisfaction, the FDA may issue a warning letter (which would similarly necessitate prompt corrective action) and/or proceed directly to other forms of enforcement action, including the imposition of operating restrictions, including a ceasing of operations, on one or more facilities, enjoining and restraining certain violations of applicable law pertaining to medical devices and assessing civil or criminal penalties against our officers, employees or us. The FDA could also issue a corporate warning letter, a recidivist warning letter or a consent decree of permanent injunction. The FDA may also recommend prosecution to the U.S. Department of Justice (“DOJ”). Any adverse regulatory action, depending on its magnitude, may restrict us from effectively manufacturing, marketing and selling our products and could have a material adverse effect on our business, financial condition and results of operations. For information regarding certain warning letters and FDA Form 483 inspectional observations that we are addressing, see Note 20 to the consolidated financial statements.

The FDA, in cooperation with U.S. Customs and Border Protection (“CBP”), administers controls over the import of medical devices into the U.S. The CBP imposes its own regulatory requirements on the import of our products, including inspection and possible sanctions for noncompliance. We are also subject to foreign trade controls administered by certain U.S. government agencies, including the Bureau of Industry and Security within the Commerce Department and the Office of Foreign Assets Control within the Treasury Department (“OFAC”).

There are also requirements of state, local and foreign governments that we must comply with in the manufacture and marketing of our products.

In many of the foreign countries in which we market our products, we are subject to local regulations affecting, among other things, design and product standards, packaging requirements and labeling requirements. Many of the regulations applicable to our devices and products in these countries are similar to those of the FDA. The member countries of the European Union have adopted the European Medical Device Directive, which creates a single set of medical device regulations for products marketed in all member countries. Compliance with the Medical Device Directive and

certification to a quality system (e.g., ISO 13485 certification) enable the manufacturer to place a CE mark on its products. To obtain authorization to affix the CE mark to a product, a recognized European Notified Body must assess a manufacturer’s quality system and the product’s conformity to the requirements of the Medical Device Directive. We are subject to inspection by the Notified Bodies for compliance with these requirements. In addition, many countries, including Canada and Japan, have very specific additional regulatory requirements for quality assurance and manufacturing with which we must comply.

Further, we are subject to other federal, state and foreign laws concerning healthcare fraud and abuse, including false claims and anti-kickback laws, as well as the U.S. Physician Payments Sunshine Act and similar state and foreign healthcare professional payment transparency laws. These laws are administered by, among others, the DOJ, the Office of Inspector General of the Department of Health and Human Services (“OIG-HHS”), state attorneys general and various foreign government agencies. Many of these agencies have increased their enforcement activities with respect to medical device manufacturers in recent years. Violations of these laws are punishable by criminal and/or civil sanctions, including, in some instances, fines, imprisonment and, within the U.S., exclusion from participation in government healthcare programs, including Medicare, Medicaid and Veterans Administration health programs.

Our operations in foreign countries are subject to the extraterritorial application of the U.S. Foreign Corrupt Practices Act (“FCPA”). Our global operations are also subject to foreign anti-corruption laws, such as the UK Bribery Act, among others. As part of our global compliance program, we seek to address anti-corruption risks proactively. On January 12, 2017, we resolved previously-disclosed FCPA matters involving Biomet and certain of its subsidiaries. As part of that settlement, we entered into a Deferred Prosecution Agreement (“DPA”) with the DOJ. For information regarding the DPA, see Note 20 to the consolidated financial statements.

Our facilities and operations are also subject to complex federal, state, local and foreign environmental and occupational safety laws and regulations, including those relating to discharges of substances in the air, water and land, the handling, storage and disposal of wastes and the clean-up of properties contaminated by pollutants. We do not expect that the ongoing costs of compliance with these environmental requirements will have a material impact on our consolidated earnings, capital expenditures or competitive position.

In addition, we are subject to federal, state and international data privacy and security laws and regulations that govern the collection, use, disclosure and protection of health-related and other personal information. Certain of our affiliates are subject to privacy and security regulations promulgated under the Health Insurance Portability and Accountability Act of 1996 and the Health Information Technology for Economic and Clinical Health Act (collectively, “HIPAA”). The FDA also has issued guidance to which we may be subject concerning data security for medical devices.

International data protection laws, including the European Union (“EU”) Data Protection Directive and member state implementing legislation, may also apply to some of our operations. The EU Data Protection Directive imposes strict obligations and restrictions on the ability to collect, analyze and transfer EU personal data. Moreover, the General Data Protection Regulation, an EU-wide regulation that will be fully enforceable by May 25, 2018, will introduce new data protection requirements in the EU and substantial fines for violations of the data protection rules.

Failure to comply with U.S. and international data protection laws and regulations could result in government enforcement actions (which could include civil and/or criminal penalties), private litigation and/or adverse publicity and could negatively affect our operating results and business.

Competition

The orthopaedics and broader musculoskeletal care industry is highly competitive. In the global markets for our knees, hips, and S.E.T. products, our major competitors include: the DePuy Synthes Companies of Johnson & Johnson; Stryker Corporation; and Smith & Nephew plc. There are smaller competitors in these product categories as well who have success by focusing on smaller subsegments of the industry.

In the spine and CMF categories, we compete globally primarily with the spinal and biologic business of Medtronic plc, the DePuy Synthes Companies, Stryker Corporation, NuVasive, Inc. and Globus Medical, Inc.

In the dental implant category, we compete primarily with Nobel Biocare Holding AG (part of the Danaher Corporation), Straumann Holding AG and Dentsply International.

Competition within the industry is primarily based on pricing, technology, innovation, quality, reputation and customer service. A key factor in our continuing success in the future will be our ability to develop new products and improve existing products and technologies.

Manufacturing and Raw Materials

We manufacture our products at various sites. We also strategically outsource some manufacturing to qualified suppliers who are highly capable of producing components.

The manufacturing operations at our facilities are designed to incorporate the cellular concept for production and to implement tenets of a manufacturing philosophy focused on continuous improvement efforts in product quality, lead time reduction and capacity optimization. Our continuous improvement efforts are driven by Lean and Six Sigma methodologies. In addition, at certain of our manufacturing facilities, many of the employees are cross-trained to perform a broad array of operations.

We generally target operating our manufacturing facilities at optimal levels of total capacity. We continually evaluate the potential to in-source and outsource production as part of our manufacturing strategy to provide value to our stakeholders.

We have improved our manufacturing processes to harmonize and optimize our quality systems and to protect our

profitability and offset the impact of inflationary costs. We have, for example, employed computer-assisted robots and multi-axis grinders to precision polish medical devices; automated certain manufacturing and inspection processes, including on-machine inspection and process controls; purchased state-of-the-art equipment; in-sourced core products and processes; and negotiated cost reductions from third-party suppliers.

We use a diverse and broad range of raw materials in the manufacturing of our products. We purchase all of our raw materials and select components used in manufacturing our products from external suppliers. In addition, we purchase some supplies from single sources for reasons of quality assurance, sole source availability, cost effectiveness or constraints resulting from regulatory requirements. We work closely with our suppliers to assure continuity of supply while maintaining high quality and reliability. To date, we have not experienced any significant difficulty in locating and obtaining the materials necessary to fulfill our production schedules.

Intellectual Property

Patents and other proprietary rights are important to the continued success of our business. We also rely upon trade secrets, know-how, continuing technological innovation and licensing opportunities to develop and maintain our

competitive position. We protect our proprietary rights through a variety of methods, including confidentiality agreements and proprietary information agreements with vendors, employees, consultants and others who may have access to proprietary information. We own or control through licensing arrangements over 8,000 issued patents and patent applications throughout the world that relate to aspects of the technology incorporated in many of our products.

Employees

As of December 31, 2016, we employed approximately 18,500 employees worldwide, including approximately 2,000 employees dedicated to research and development. Approximately 8,700 employees are located within the U.S. and approximately 9,800 employees are located outside of the U.S., primarily throughout Europe and in Japan. We have approximately 7,800 employees dedicated to manufacturing our products worldwide. The Warsaw, Indiana production facilities employ approximately 2,600 employees in the aggregate.

We have production employees represented by a labor union in each of Dover, Ohio and Bridgend, South Wales. We have other employees in Europe who are represented by Works Councils. We believe that our relationship with our employees is satisfactory.

Mr. Dvorak was appointed President, Chief Executive Officer and a member of the Board of Directors in May 2007. He championed Zimmer’s acquisition of Biomet, positioning the combined Zimmer Biomet as a global leader in musculoskeletal healthcare. Prior to his appointment as President and Chief Executive Officer, Mr. Dvorak served as Group President, Global Businesses and Chief Legal Officer from December 2005. From October 2003 to December 2005, he served as Executive Vice President, Corporate Services, Chief Counsel and Secretary, as well as Chief Compliance Officer. Mr. Dvorak joined the Company (then Zimmer) as Senior Vice President,

Corporate Affairs and General Counsel in December 2001, shortly following the Company’s spin-off from its former parent.

Mr. Florin was appointed Senior Vice President and Chief Financial Officer effective June 2015. He served as Senior Vice President and Chief Financial Officer of Biomet from June 2007 to June 2015. Prior to joining Biomet, Mr. Florin served as Vice President and Corporate Controller of Boston Scientific Corporation from 2001 through May 2007. Before being appointed Corporate Controller in 2001, Mr. Florin served in financial leadership positions within Boston

Scientific Corporation and its various business units. Prior to joining Boston Scientific Corporation, Mr. Florin worked for C.R. Bard from October 1990 through June 1995.

Mr. Collins was appointed Vice President, Corporate Controller and Chief Accounting Officer effective June 2015. Prior to that, Mr. Collins served as Vice President, Finance for the Global Reconstructive Division and Global Operations organization. He joined the Company (then Zimmer) in 2010 as Vice President, Finance for the Global Reconstructive Division and U.S. Commercial organization. Before joining Zimmer, Mr. Collins held the position of Vice President, Finance and served as the chief financial officer of the Commercial segment of Oshkosh Corporation from 2007 to 2010. From 1997 to 2007, he was employed at Guidant Corporation and Boston Scientific Corporation, where he held a number of positions of increasing responsibility, including Finance Director and chief financial officer of the Guidant Japan organization, Global Director of Operations Finance and Director of Strategic Planning.

Mr. Delp was appointed President, Americas effective January 2017. He is responsible for the Company’s sales and management of the direct and indirect sales channels in the Americas region, including the United States, Canada and Latin America. He served as Vice President, U.S. Sales from June 2015 until assuming his current role. Mr. Delp previously served in commercial Vice President roles with Biomet from October 2007 until June 2015. Prior to those appointments, Mr. Delp held numerous positions within the musculoskeletal healthcare field, where he began his career in 1995.

Mr. Johnson was appointed Group President with responsibility for the Company’s Spine, Dental, Craniomaxillofacial and Thoracic businesses effective June 2015. He served as Senior Vice President, Biomet, and President, Biomet Microfixation, Bone Healing and Spine from June 2012 to June 2015. Before that, he served as President, Biomet Microfixation from 2007 to 2012 and Vice President, Global Marketing, Biomet Microfixation from 2006 to 2007. Prior to that, Mr. Johnson served as Director of Global Marketing for Regeneration Technologies, Inc. (now known as RTI Surgical, Inc.). He also worked for Biomet for five years previously, starting his career with Biomet in 1999.

Dr. Mazur-Hofsaess was appointed President, EMEA in April 2013. Dr. Mazur-Hofsaess joined the Company (then Zimmer) in February 2010 as Senior Vice President, EMEA Reconstructive. She has more than 20 years’ experience within the pharmaceutical, diagnostics and medical device sectors. Prior to joining Zimmer, Dr. Mazur-Hofsaess served in various management positions at Abbott Laboratories beginning in 2001, most recently as Vice President, Diagnostics – Europe.

Mr. Nolan was appointed Group President effective June 2015. He has responsibility for the Company’s Biologics, Extremities, Sports Medicine, Surgical, Trauma, Foot and Ankle, Office Based Technologies and Zimmer Biomet Signature Solutions businesses. He joined the Company (then Zimmer) in November 2012 as Senior Vice President, Sales. From January 2014 to June 2015, he served as Senior Vice President, Sales

and Advanced Solutions. Prior to joining Zimmer, Mr. Nolan served as President, Biomet Sports Medicine, Extremities and Trauma from 2011 to 2012 and as President, Biomet Sports Medicine from 2001 to 2011. He joined Biomet in 1996.

Mr. Phipps was appointed Senior Vice President, General Counsel and Secretary in May 2007. He has global responsibility for the Company’s Legal Affairs and he serves as Secretary to the Board of Directors. Mr. Phipps also oversees the Company’s Government Affairs, Corporate Communication and Public Relations activities. Previously, Mr. Phipps served as Associate General Counsel and Corporate Secretary from December 2005 to May 2007. He joined the Company (then Zimmer) in September 2003 as Associate Counsel and Assistant Secretary. Prior to joining Zimmer, he served as Vice President and General Counsel of L&N Sales and Marketing, Inc. in Pennsylvania and he practiced law with the firm of Morgan, Lewis & Bockius in Philadelphia, focusing on corporate and securities law, mergers and acquisitions and financial transactions.

Mr. Williamson was appointed Group President, Joint Reconstruction with responsibility for the Company’s Knee, Hip, Bone Cement, Patient-Matched Implants and Personalized Solutions businesses effective June 2015. He served as Senior Vice President, Biomet and President, Global Reconstructive Joints from February 2014 to June 2015. Prior to that, Mr. Williamson served as Biomet’s Vice President and General Manager, Global Bone Cement and Biomaterials Research from September 2011 to February 2014, and as Corporate Vice President, Global Biologics and Biomaterials from May 2006 to September 2011. Mr. Williamson previously served as Biomet’s Vice President, Business Development from December 2003 to May 2006. He began his career with Biomet in 1990 as a Product Development Engineer.

Mr. Yi was appointed President, Asia Pacific effective June 2015. He is responsible for the sales, marketing and distribution of products in the Asia Pacific region. Mr. Yi joined the Company (then Zimmer) in March 2013 as Senior Vice President, Asia Pacific. Before joining Zimmer, he served as Vice President and General Manager of St. Jude Medical for Asia Pacific and Australia from 2005 to 2013. Prior to that, Mr. Yi held several leadership positions over a ten-year period with Boston Scientific Corporation, ultimately serving as Vice President for North Asia.

AVAILABLE INFORMATION

Our Internet address is www.zimmerbiomet.com. We routinely post important information for investors on our website in the “Investor Relations” section, which may be accessed from our homepage at www.zimmerbiomet.com or directly at http://investor.zimmerbiomet.com. We use this website as a means of disclosing material, non-public information and for complying with our disclosure obligations under Regulation FD. Accordingly, investors should monitor the Investor Relations section of our website, in addition to following our press releases, Securities and Exchange Commission (“SEC”) filings, public conference calls,

presentations and webcasts. Our goal is to maintain the Investor Relations website as a portal through which investors can easily find or navigate to pertinent information about us, free of charge, including:

The information available on our website is not incorporated by reference in, or a part of, this or any other report we file with or furnish to the SEC.

Risk factors which could cause actual results to differ from our expectations and which could negatively impact our financial condition and results of operations are discussed below and elsewhere in this report. Additional risks and uncertainties not presently known to us or that are currently not believed to be significant to our business may also affect our actual results and could harm our business, financial condition and results of operations. If any of the risks or uncertainties described below or any additional risks and uncertainties actually occur, our business, results of operations and financial condition could be materially and adversely affected.

We may not be able to effectively integrate acquired businesses into our operations or achieve expected cost savings or profitability from our acquisitions.

Our acquisitions involve numerous risks, including:

As a result, if we fail to evaluate and execute acquisitions properly, we might not achieve the anticipated benefits of such acquisitions and we may incur costs in excess of what we anticipate. These risks would likely be greater in the case of larger acquisitions.

We incurred substantial additional indebtedness in connection with the Biomet and LDR mergers and may not be able to meet all of our debt obligations.

We incurred substantial additional indebtedness in connection with the Biomet and LDR Holding Corporation (“LDR”) mergers. At December 31, 2016, our total indebtedness was $11.2 billion, as compared to $1.4 billion at December 31, 2014. We funded the cash portion of the Biomet merger consideration, the pay-off of certain indebtedness of Biomet and the payment of transaction-related expenses through a combination of available cash-on-hand and proceeds from debt financings, including proceeds from a $7.65 billion issuance of senior unsecured notes in March 2015 and borrowings of $3.0 billion under a five-year term loan in June 2015. In addition, in September 2016, we borrowed $750 million under a three-year unsecured term loan facility and utilized these funds to repay outstanding borrowings under our revolving facility incurred in connection with the acquisition of LDR. Also, in December 2016, we issued €1.0 billion aggregate principal amount of Euro-denominated senior notes and used the proceeds to repay a portion of the U.S. dollar-denominated senior notes issued in connection with the Biomet merger. As of December 31, 2016, our debt service obligations, comprised of principal and interest (excluding capital leases and equipment notes), during the next 12 months are expected to be $891.1 million. As a result of the increase in our debt, demands on our cash resources have increased. The increased level of debt could, among other things:

If we fail to comply with healthcare fraud and abuse or data privacy and security laws and regulations, we could face substantial penalties and our business, operations and financial condition could be adversely affected.

Our industry is subject to various federal, state and foreign laws and regulations pertaining to healthcare fraud and abuse, including the federal False Claims Act, the federal Anti-Kickback Statute, the federal Stark law, the federal Physician Payments Sunshine Act and similar state and foreign laws. In addition, we are subject to various federal and foreign laws concerning anti-corruption and anti-bribery matters, sales to countries or persons subject to economic sanctions and other matters affecting our international operations. Violations of these laws are punishable by criminal and/or civil sanctions, including, in some instances, fines, imprisonment and, within the U.S., exclusion from participation in government healthcare programs, including Medicare, Medicaid and Veterans Administration health programs. These laws are administered by, among others, the DOJ, the OIG-HHS, the SEC, the OFAC, the Bureau of Industry and Security of the U.S. Department of Commerce and state attorneys general.

We are also subject to federal, state and international data privacy and security laws and regulations that govern the collection, use, disclosure and protection of health-related and other personal information. Certain of our affiliates are subject to privacy and security regulations promulgated under HIPAA. The FDA also has issued guidance to which we may be subject concerning data security for medical devices.

International data protection laws, including the EU Data Protection Directive and member state implementing legislation, may also apply to some of our operations and restrict our ability to collect, analyze and transfer EU personal data. Moreover, the General Data Protection Regulation, an EU-wide regulation that will be fully enforceable by May 25, 2018, will introduce new data protection requirements in the EU and substantial fines for violations of the data protection rules.

The interpretation and enforcement of the laws and regulations described above are uncertain and subject to change.

If we fail to comply with the terms of the DPA that we entered into in January 2017, we may be subject to criminal prosecution and/or exclusion from federal healthcare programs.

On January 12, 2017, we resolved previously-disclosed FCPA matters involving Biomet and certain of its subsidiaries.

As part of the settlement, we entered into a DPA with the DOJ. A copy of the DPA is incorporated by reference as an exhibit to this report.

If we do not comply with the terms of the DPA, we could be subject to prosecution for violating the internal controls provisions of the FCPA and the conduct of Biomet and its subsidiaries described in the DPA, which conduct pre-dated our acquisition of Biomet, as well as any new or continuing violations. We could also be subject to exclusion by OIG-HHS from participation in federal healthcare programs, including Medicaid and Medicare. Any of these events could have a material adverse effect on our business, financial condition, results of operations and cash flows.

We are subject to various governmental regulations relating to the manufacturing, labeling and marketing of our products, non-compliance with which could adversely affect our business, financial condition and results of operations.

The medical devices we design, develop, manufacture and market are subject to rigorous regulation by the FDA and numerous other federal, state and foreign governmental authorities. The process of obtaining regulatory approvals to market a medical device can be costly and time consuming and approvals might not be granted for future products on a timely basis, if at all. Delays in receipt of, or failure to obtain, approvals for future products could result in delayed realization of product revenues or in substantial additional costs.

Both before and after a product is commercially released, we have ongoing responsibilities under FDA regulations. Compliance with the FDA’s requirements, including the QSR, recordkeeping regulations, labeling and promotional requirements and adverse event reporting regulations, is subject to continual review and is monitored rigorously through periodic inspections by the FDA, which may result in observations on Form 483, and in some cases warning letters, that require corrective action, or other forms of enforcement. If the FDA were to conclude that we are not in compliance with applicable laws or regulations, or that any of our medical devices are ineffective or pose an unreasonable health risk, the FDA could ban such medical devices, detain or seize adulterated or misbranded medical devices, order a recall, repair, replacement, or refund of payment of such devices, refuse to grant pending premarket approval applications, refuse to provide certificates to foreign governments for exports, and/or require us to notify healthcare professionals and others that the devices present unreasonable risks of substantial harm to the public health. The FDA may also impose operating restrictions including a ceasing of operations, on one or more facilities, enjoin and restrain certain violations of applicable law pertaining to medical devices and assess civil or criminal penalties against our officers, employees or us. The FDA could also issue a corporate warning letter, a recidivist warning letter or a consent decree of permanent injunction. The FDA may also recommend prosecution to the DOJ. Any adverse regulatory action, depending on its magnitude, may restrict us from effectively manufacturing, marketing and

selling our products and could have a material adverse effect on our business, financial condition and results of operations.

In 2012, we received a warning letter from the FDA citing concerns relating to certain processes pertaining to products manufactured at our Ponce, Puerto Rico manufacturing facility. In June 2015, Biomet received a warning letter from the FDA that requested additional information to allow the FDA to evaluate the adequacy of Biomet’s responses to certain Form 483 observations issued following an inspection of Biomet’s Zhejiang, China manufacturing facility in January 2015. In May 2016, we received a warning letter from the FDA related to observed non-conformities with current good manufacturing practice requirements of the QSR at our facility in Montreal, Quebec, Canada. As of December 31, 2016, these warning letters remained pending. Until the violations are corrected, we may become subject to additional regulatory action by the FDA as described above, the FDA may refuse to grant premarket approval applications and/or the FDA may refuse to grant export certificates, any of which could have a material adverse effect on our business, financial condition and results of operations. Additional information regarding these and other FDA regulatory matters can be found in Note 20 to the consolidated financial statements.

Our products and operations are also often subject to the rules of industrial standards bodies, such as the International Standards Organization. If we fail to adequately address any of these regulations, our business could be harmed.

Interruption of our manufacturing operations could adversely affect our business, financial condition and results of operations.

We have manufacturing sites all over the world. In some instances, however, the manufacturing of certain of our product lines is concentrated in one or more of our plants. Damage to one or more of our facilities from weather or natural disaster-related events, or issues in our manufacturing arising from failure to follow specific internal protocols and procedures, compliance concerns relating to the QSR and Good Manufacturing Practice requirements, equipment breakdown or malfunction or other factors could adversely affect our ability to manufacture our products. In the event of an interruption in manufacturing, we may be unable to move quickly to alternate means of producing affected products or to meet customer demand. In the event of a significant interruption, for example, as a result of a failure to follow regulatory protocols and procedures, we may experience lengthy delays in resuming production of affected products due primarily to the need for regulatory approvals. As a result, we may experience loss of market share, which we may be unable to recapture, and harm to our reputation, which could adversely affect our business, financial condition and results of operations.

Our success depends on our ability to effectively develop and market our products against those of our competitors.

We operate in a highly competitive environment. Our present or future products could be rendered obsolete or uneconomical by technological advances by one or more of our present or future competitors or by other therapies, including

biological therapies. To remain competitive, we must continue to develop and acquire new products and technologies. Competition is primarily on the basis of:

In markets outside of the U.S., other factors influence competition as well, including:

Our competitors may:

Any of these factors, alone or in combination, could cause us to have difficulty maintaining or increasing sales of our products.

If we fail to retain the independent agents and distributors upon whom we rely heavily to market our products, customers may not buy our products and our revenue and profitability may decline.

Our marketing success in the U.S. and abroad depends significantly upon our agents’ and distributors’ sales and service expertise in the marketplace. Many of these agents have developed professional relationships with existing and potential customers because of the agents’ detailed knowledge of products and instruments. A loss of a significant number of our agents could have a material adverse effect on our business and results of operations.

If we do not introduce new products in a timely manner, our products may become obsolete over time, customers may not buy our products and our revenue and profitability may decline.

Demand for our products may change, in certain cases, in ways we may not anticipate because of:

Without the timely introduction of new products and enhancements, our products may become obsolete over time. If that happens, our revenue and operating results would suffer. The success of our new product offerings will depend on several factors, including our ability to:

In addition, new materials, product designs and surgical techniques that we develop may not be accepted quickly, in some or all markets, because of, among other factors:

Moreover, innovations generally require a substantial investment in research and development before we can determine their commercial viability and we may not have the financial resources necessary to fund the production. In addition, even if we are able to successfully develop enhancements or new generations of our products, these enhancements or new generations of products may not produce revenue in excess of the costs of development and they may be quickly rendered obsolete by changing customer preferences or the introduction by our competitors of products embodying new technologies or features.

If third-party payors decline to reimburse our customers for our products or reduce reimbursement levels, the demand for our products may decline and our ability to sell our products profitably may be harmed.

We sell our products and services to hospitals, doctors, dentists and other healthcare providers, all of which receive reimbursement for the healthcare services provided to their patients from third-party payors, such as domestic and international government programs, private insurance plans and managed care programs. These third-party payors may deny reimbursement if they determine that a device used in a procedure was not in accordance with cost-effective treatment methods, as determined by the third-party payor, or was used for an unapproved indication. Third-party payors may also decline to reimburse for experimental procedures and devices.

In addition, third-party payors are increasingly attempting to contain healthcare costs by limiting both coverage and the level of reimbursement for medical products and services. If third-party payors reduce reimbursement levels to hospitals and other healthcare providers for our products, demand for our products may decline, or we may experience increased pressure to reduce the prices of our products, which could have a material adverse effect on our sales and results of operations.

We have also experienced downward pressure on product pricing and other effects of healthcare reform in our international markets. If key participants in government healthcare systems reduce the reimbursement levels for our products, our sales and results of operations may be adversely affected.

The ongoing cost-containment efforts of healthcare purchasing organizations may have a material adverse effect on our results of operations.

Many customers for our products have formed group purchasing organizations in an effort to contain costs. Group purchasing organizations negotiate pricing arrangements with medical supply manufacturers and distributors, and these negotiated prices are made available to a group purchasing organization’s affiliated hospitals and other members. If we are not one of the providers selected by a group purchasing organization, affiliated hospitals and other members may be less likely to purchase our products, and, if the group purchasing organization has negotiated a strict compliance contract for another manufacturer’s products, we may be precluded from making sales to members of the group purchasing organization for the duration of the contractual arrangement. Our failure to respond to the cost-containment efforts of group purchasing organizations may cause us to lose market share to our competitors and could have a material adverse effect on our sales and results of operations.

We conduct a significant amount of our sales activity outside of the U.S., which subjects us to additional business risks and may cause our profitability to decline due to increased costs.

We sell our products in more than 100 countries and derived nearly 40 percent of our net sales in 2016 from outside the U.S. We intend to continue to pursue growth opportunities in sales internationally, including in emerging markets, which could expose us to additional risks associated with international sales and operations. Our international operations are, and will continue to be, subject to a number of risks and potential costs, including:

Violations of foreign laws or regulations could result in fines, criminal sanctions against us, our officers or our employees, prohibitions on the conduct of our business and damage to our reputation.

Disruptions in the supply of the materials and components used in manufacturing our products could adversely affect our results of operations and financial condition.

We purchase many of the materials and components used in manufacturing our products from third-party vendors and we outsource some key manufacturing activities. Certain of these materials and components and outsourced activities can only be obtained from a single source or a limited number of sources due to quality considerations, expertise, costs or constraints resulting from regulatory requirements. In certain cases, we may not be able to establish additional or replacement vendors for such materials or components or outsourced activities in a timely or cost effective manner, largely as a result of FDA regulations that require validation of materials and components prior to their use in our products and the complex nature of our and many of our vendors’ manufacturing processes. A reduction or interruption in the supply of materials or components used in manufacturing our products; an inability to timely develop and validate alternative sources if required; or a significant increase in the price of such materials or components could adversely affect our financial condition and results of operations.

Moreover, we are subject to the SEC’s rule regarding disclosure of the use of certain minerals, known as “conflict minerals” (tantalum, tin and tungsten (or their ores) and gold), which are mined from the Democratic Republic of the Congo and adjoining countries. This rule could adversely affect the sourcing, availability and pricing of materials used in the manufacture of our products, which could adversely affect our manufacturing operations and our profitability. In addition, we are incurring additional costs to comply with this rule, including costs related to determining the source of any relevant minerals and metals used in our products. We have a complex supply chain and we may not be able to sufficiently verify the origins of the minerals and metals used in our products through our due diligence procedures. As a result, we may face reputational challenges with our customers and other stakeholders.

We may have additional tax liabilities.

We are subject to income taxes in the U.S. and many foreign jurisdictions. Significant judgment is required in determining our worldwide provision for income taxes. In the ordinary course of our business, there are many transactions and calculations where the ultimate tax determination is uncertain. We regularly are under audit by tax authorities. Although we believe our tax estimates are reasonable, the final determination of tax audits and any related litigation could be materially different from our historical income tax provisions and accruals. The results of an audit or litigation could have a material effect on our financial statements in the period or periods for which that determination is made.

We earn a significant amount of our operating income from outside the U.S., and any repatriation of funds representing earnings of foreign subsidiaries may significantly impact our effective tax rates. In addition, there have been proposals to change U.S. tax laws that would significantly impact how U.S. multinational corporations are taxed on

foreign earnings. Although we cannot predict whether or in what form this proposed legislation will pass, if enacted it could have a material adverse impact on our tax expense and cash flow.

We are subject to risks arising from currency exchange rate fluctuations, which can increase our costs, cause our profitability to decline and expose us to counterparty risks.

A substantial portion of our foreign revenues is generated in Europe and Japan. The U.S. Dollar value of our foreign-generated revenues varies with currency exchange rate fluctuations. Significant increases in the value of the U.S. Dollar relative to the Euro or the Japanese Yen, as well as other currencies, could have a material adverse effect on our results of operations. Although we address currency risk management through regular operating and financing activities, and, on a limited basis, through the use of derivative financial instruments, those actions may not prove to be fully effective.

Pending and future product liability claims and litigation could adversely impact our financial condition and results of operations and impair our reputation.

Our business exposes us to potential product liability risks that are inherent in the design, manufacture and marketing of medical devices. In the ordinary course of business, we are the subject of product liability lawsuits alleging that component failures, manufacturing flaws, design defects or inadequate disclosure of product-related risks or product-related information resulted in an unsafe condition or injury to patients. As discussed further in Note 20 to the consolidated financial statements, we are defending product liability lawsuits relating to the Durom^® Acetabular Component (“Durom Cup”), certain products within the NexGen Knee System, and the M2a-Magnum^TM hip system. The majority of the Durom Cup cases are pending in a federal Multidistrict Litigation (“MDL”) in the District of New Jersey (In Re: Zimmer Durom Hip Cup Products Liability Litigation); the majority of the NexGen Knee System cases are pending in a federal MDL in the Northern District of Illinois (In Re: Zimmer NexGen Knee Implant Products Liability Litigation); and the majority of the M2a-Magnum hip system cases are pending in a federal MDL in the Northern District of Indiana (In Re: Biomet M2a Magnum Hip Implant Products Liability Litigation). We are also currently defending a number of other product liability lawsuits and claims related to various other products. Any product liability claim brought against us, with or without merit, can be costly to defend. Product liability lawsuits and claims, safety alerts or product recalls, regardless of their ultimate outcome, could have a material adverse effect on our business and reputation and on our ability to attract and retain customers.

Although we maintain third-party product liability insurance coverage, we have substantial self-insured retention amounts that we must pay in full before obtaining any insurance proceeds to satisfy a judgment or settlement. Furthermore, even if any product liability loss is covered by our insurance, it is possible that claims against us may exceed the coverage limits of our insurance policies and we would

have to pay the amount of any settlement or judgment that is in excess of our policy limits. Product liability claims in excess of applicable insurance could have a material adverse effect on our business, financial condition and results of operations.

We are substantially dependent on patent and other proprietary rights, and failing to protect such rights or to be successful in litigation related to our rights or the rights of others may result in our payment of significant monetary damages and/or royalty payments, negatively impact our ability to sell current or future products, or prohibit us from enforcing our patent and other proprietary rights against others.

Claims of intellectual property infringement and litigation regarding patent and other intellectual property rights are commonplace in our industry and are frequently time consuming and costly. At any given time, we may be involved as either plaintiff or defendant in a number of patent infringement actions, the outcomes of which may not be known for prolonged periods of time. While it is not possible to predict the outcome of patent and other intellectual property litigation, such litigation could result in our payment of significant monetary damages and/or royalty payments, negatively impact our ability to sell current or future products, or prohibit us from enforcing our patent and proprietary rights against others, which could have a material adverse effect on our business and results of operations.

Patents and other proprietary rights are essential to our business. We rely on a combination of patents, trade secrets and non-disclosure and other agreements to protect our proprietary intellectual property, and we will continue to do so. While we intend to defend against any threats to our intellectual property, these patents, trade secrets and other agreements may not adequately protect our intellectual property. Further, our currently pending or future patent applications may not result in patents being issued to us, patents issued to or licensed by us in the past or in the future may be challenged or circumvented by competitors, and such patents may be found invalid, unenforceable or insufficiently broad to protect our technology or to provide us with any competitive advantage. Third parties could obtain patents that may require us to negotiate licenses to conduct our business, and the required licenses may not be available on reasonable terms or at all.

In addition, intellectual property rights may be unavailable or of limited effect in some foreign countries. If we do not obtain sufficient international protection for our intellectual property, our competitiveness in international markets could be impaired, which could limit our growth and revenue.

We also attempt to protect our trade secrets, proprietary know-how and continuing technological innovation with security measures, including the use of non-disclosure and other agreements with our employees, consultants and collaborators. We cannot be certain that these agreements will not be breached, that we will have adequate remedies for any breach, that others will not independently develop substantially equivalent proprietary information, or that third parties will not otherwise gain access to our trade secrets or proprietary knowledge.

We are involved in legal proceedings that may result in adverse outcomes.

In addition to intellectual property and product liability claims and lawsuits, we are involved in various commercial and securities litigation and claims and other legal proceedings that arise from time to time in the ordinary course of our business. For example, as discussed further in Note 20 to the consolidated financial statements, we are defending a purported class action lawsuit, Shah v. Zimmer Biomet Holdings, Inc. et al., filed against us and certain of our officers alleging violations of the securities laws related to our third quarter 2016 performance and 2016 forecasts. Although we believe we have substantial defenses in these matters, litigation and other claims are subject to inherent uncertainties and management’s view of these matters may change in the future. Given the uncertain nature of legal proceedings generally, we are not able in all cases to estimate the amount or range of loss that could result from an unfavorable outcome. We could in the future incur judgments or enter into settlements of claims that could have a material adverse effect on our results of operations in any particular period.

We are increasingly dependent on sophisticated information technology and if we fail to effectively maintain or protect our information systems or data, including from data breaches, our business could be adversely affected.

We are increasingly dependent on sophisticated information technology for our products and infrastructure. As a result of technology initiatives, recently enacted regulations, changes in our system platforms and integration of new business acquisitions, including the Biomet merger, we have been consolidating and integrating the number of systems we operate and have upgraded and expanded our information systems capabilities. We also have outsourced elements of our operations to third parties, and, as a result, we manage a number of third-party vendors who may or could have access to our confidential information. Our information systems, and those of third-party vendors with whom we contract, require an ongoing commitment of significant resources to maintain, protect and enhance existing systems and develop new systems to keep pace with continuing changes in information technology, evolving systems and regulatory standards and the increasing need to protect patient and customer information. In addition, given their size and complexity, these systems could be vulnerable to service interruptions or to security breaches from inadvertent or intentional actions by our employees, third-party vendors and/or business partners, or from cyber-attacks by malicious third parties attempting to gain unauthorized access to our products, systems or confidential information (including, but not limited to, intellectual property, proprietary business information and personal information). Cyber-attacks, such as those involving the deployment of malware, are increasing in their frequency, sophistication and intensity and have become increasingly difficult to detect. If we fail to maintain or protect our information systems and data integrity effectively, we could:

While we have invested heavily in the protection of our data and information technology, there can be no assurance that our activities related to consolidating the number of systems we operate, upgrading and expanding our information systems capabilities, protecting and enhancing our systems and implementing new systems will be successful. Despite our efforts, we cannot assure you that cyber-attacks or data breaches will not occur or that systems issues will not arise in the future. Any significant breakdown, intrusion, breach, interruption, corruption or destruction of these systems could have a material adverse effect on our business and reputation.

We have determined that a material weakness exists in our internal control over financial reporting which could, if not remediated, result in a material misstatement in our financial statements.

We are responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rule 13a-15(e) and 13a-15(f) under the Exchange Act. As discussed in Management’s Report on Internal Control over Financial Reporting appearing under item 7A of this report, we identified a material weakness in our internal control over financial reporting as of December 31, 2016 related to management’s controls over accounting for income taxes. A material weakness is defined as a deficiency, or combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. As a result of this material weakness, our management concluded that our internal control over financial reporting was not effective, and our disclosure controls and procedures were not effective as of December 31, 2016. We are actively engaged in developing and implementing a remediation plan designed to address this material weakness. However, we cannot provide any assurance that these remediation efforts will be successful or that our internal control over financial reporting will be effective as a result of these efforts. If the remedial measures are insufficient to address the material weakness or if additional material weaknesses in internal control over financial reporting are discovered or occur in the future, our consolidated financial statements may contain material misstatements and we could be required to restate our financial results.

Future material impairments in the carrying value of our intangible assets, including goodwill, would negatively affect our operating results.

Our assets include intangible assets, primarily goodwill. At December 31, 2016, we had $10.5 billion in goodwill. The goodwill results from our acquisition activity, including the

Biomet merger, and represents the excess of the consideration transferred over the fair value of the net assets acquired. We assess at least annually whether events or changes in circumstances indicate that the carrying value of our intangible assets may not be recoverable. If the operating performance at one or more of our business units falls significantly below current levels, if competing or alternative technologies emerge, or if market conditions or future cash flow estimates for one or more of our businesses decline, we could be required, under current U.S. accounting rules, to record a non-cash charge to operating earnings for the amount of the impairment. Any write-off of a material portion of our unamortized intangible assets would negatively affect our results of operations.

Recent developments relating to the United Kingdom’s referendum vote in favor of leaving the European Union could adversely affect us.

The United Kingdom (UK) held a referendum on June 23, 2016 in which voters approved the UK’s voluntary exit from the European Union (EU), commonly referred to as “Brexit”. The announcement of Brexit caused significant volatility in global stock markets and currency exchange rate fluctuations that resulted in the strengthening of the U.S. dollar relative to other foreign currencies in which we conduct business. The effects of Brexit are expected to be far-reaching. Brexit and the perceptions as to its impact may adversely affect business activity and economic conditions in Europe and globally and could continue to contribute to instability in global financial and foreign exchange markets. Brexit could also have the effect of disrupting the free movement of goods, services and people between the UK and the EU; however, the full effects of Brexit are uncertain and will depend on any agreements the UK may make to retain access to EU markets. Brexit could also lead to legal uncertainty and potentially divergent national laws and regulations as the UK determines which EU laws to replace or replicate. Also, as a result of Brexit, other European countries may seek to conduct referenda with respect to their continuing membership with the EU. Given these possibilities and others we may not anticipate, as well as the lack of comparable precedent, the full extent to which our business, results of operations and financial condition could be adversely affected by Brexit is uncertain.

Anti-takeover provisions in our organizational documents could delay or prevent a change of control.

Certain provisions of our Restated Certificate of Incorporation, our Restated By-Laws and the Delaware General Corporation Law may have an anti-takeover effect and may delay, defer or prevent a merger, acquisition, tender offer, takeover attempt or other change of control transaction that a stockholder might consider in its best interest, including those attempts that might result in a premium over the market price for the shares held by our stockholders.

These provisions provide for, among other things:

These anti-takeover provisions could make it more difficult for a third party to acquire us, even if the third party’s offer may be considered beneficial by many of our stockholders. As a result, our stockholders may be limited in their ability to obtain a premium for their shares.

Our Restated By-Laws designate certain Delaware courts as the sole and exclusive forum for certain types of actions and proceedings that may be initiated by our stockholders, which could limit our stockholders’ ability to obtain a favorable judicial forum for disputes with us or our directors, officers or other employees.

Our Restated By-Laws provide that, unless we consent in writing to the selection of an alternative forum, a state court located within the State of Delaware (or, if no state court located in the State of Delaware has jurisdiction, the federal district court for the District of Delaware) will be the sole and exclusive forum for any stockholder (including any beneficial owner) to bring (i) any derivative action or proceeding brought on our behalf, (ii) any action asserting a claim of breach of fiduciary duty owed by any of our directors, officers or other employees to us or our stockholders, (iii) any action asserting a claim against us or any of our directors, officers or other employees arising pursuant to any provision of the Delaware General Corporation Law or our Restated Certificate of Incorporation or our Restated By-Laws, as either may be amended from time to time, or (iv) any action asserting a claim against us or any of our directors, officers or other employees governed by the internal affairs doctrine. Any person or entity purchasing or otherwise acquiring any interest in shares of our common stock is deemed to have received notice of and consented to the foregoing provisions. This choice of forum provision may limit a stockholder’s ability to bring a claim in a judicial forum that it finds favorable for disputes with us or our directors, officers or other employees, which may discourage such lawsuits against us and our directors, officers and employees. Alternatively, if a court were to find this choice of forum provision inapplicable to, or unenforceable in respect of, one or more of the specified types of actions or proceedings, we may incur additional costs associated with resolving such matters in other jurisdictions, which could adversely affect our business, financial condition or results of operations.

Not Applicable.

The following discussion and analysis should be read in conjunction with the consolidated financial statements and the corresponding notes included elsewhere in this Annual Report on Form 10-K. Certain percentages presented in this discussion and analysis are calculated from the underlying whole-dollar amounts and therefore may not recalculate from the rounded numbers used for disclosure purposes. Certain amounts in the 2015 and 2014 consolidated financial statements have been reclassified to conform to the 2016 presentation.

On June 24, 2015, we completed our merger with Biomet and its results of operations have been included in our results starting on that date. The Biomet merger was a transformational event for us and has had significant effects on all aspects of our business. Accordingly, our sales and expenses increased significantly in the years ended December 31, 2016 and 2015 when compared to prior years.

In portions of this discussion and analysis, we also present sales information on an unaudited, pro forma basis for the years ended December 31, 2015 and 2014. This pro forma information includes Zimmer and Biomet sales in those periods as if the merger occurred on January 1, 2014. Accordingly, the pro forma net sales information for periods prior to the Closing Date includes the net sales of Biomet, but does not include the impact of the divestiture of certain product line rights and assets. We believe this pro forma analysis is beneficial for investors because it represents how the merged companies may have performed on a combined basis in 2015 and 2014.

EXECUTIVE LEVEL OVERVIEW

2016 Results

In 2016, we made strategic internal and external investments to further broaden and diversify our musculoskeletal portfolio, including the acquisitions of LDR, which provided us with an immediate position in the growing cervical disc replacement market; Cayenne Medical, Inc. (“Cayenne Medical”), a sports medicine company; Compression Therapy Concepts, Inc. (“CTC”), a provider of non-invasive products for the prevention of deep vein thrombosis; CD Diagnostics, Inc. (“CD Diagnostics”), a medical diagnostic testing company; and MedTech SA (“MedTech”), a designer and manufacturer of robotic equipment for brain and spine surgeries. These commercial additions have both enhanced our core offerings and expanded our presence across the full continuum and episode of care.

We have also continued to make progress in our commercial and operational integration of Biomet across all geographies and functions. Despite this progress, sales in 2016 were below our expectations due in part to some temporary disruption in product supply in certain Knee, Hip, Upper Extremities, Sports Medicine and Trauma product lines in the second half of 2016 related to several factors, including implementation of operational and quality process enhancements that resulted in various shipment delays, and

manufacturing forecasting constraints related to continued integration of our supply chain. In the second half of 2016, we saw increased demand for certain Knee, Hip and Upper Extremities products, particularly related to cross-selling various offerings across the combined Zimmer Biomet portfolio. The increased demand temporarily impacted our ability to effectively respond to this shifting product mix. In response, we accelerated work to enhance certain aspects of our supply chain infrastructure as we harmonize and optimize our sourcing, manufacturing and quality management systems. We are in the process of deploying new demand planning and production planning tools. We made progress on these enhancements in late 2016 and anticipate continued progress towards the replenishment of safety stocks on key cross-sell products throughout the first half of 2017.

Our 2016 results have been significantly impacted by the inclusion of Biomet sales and expenses for the entire year, including sales growth of 28.1 percent. On an unaudited pro forma basis, sales increased by 2.2 percent driven by volume/mix growth across all our regions in most of our product categories, including growth from our 2016 acquisitions, offset by the negative effects of changes in foreign currency exchange rates and continued, but stable, pricing pressure in all of our geographic regions.

Our net earnings increased in 2016 compared to 2015. The primary drivers of the improved earnings performance were the inclusion of Biomet earnings for the entire year and the absence in 2016 of significant expenses incurred in 2015 in connection with completing the Biomet merger. As a result of the merger, we recognized significant expenses in 2015 due to the acceleration of unvested LVB stock options and LVB stock-based awards, retention bonuses paid to Biomet employees and third-party sales agents who remained with Biomet through the Closing Date, severance expense, a loss related to a call premium on Biomet debt we redeemed, third party fees, and other acquisition and integration charges. While we did incur similar expenses in 2016 related to acquisitions, they were less significant.

2017 Outlook

We estimate our sales growth in 2017 over 2016 will be in a range of 2.2 to 3.2 percent. This estimate assumes foreign currency exchange rates will decrease sales by approximately 1.5 percent, continued pricing pressure will decrease sales by approximately 2 percent and the inclusion of LDR sales for the full year will increase sales by approximately 1.2 percent. As noted previously, we expect to make substantial progress in remediating supply constraints during the first half of this year as we prioritize production for key cross-sell brands, clear our back orders, and restore safety stocks.

Additionally, as part of our effort to implement certain regulatory compliance enhancements, we are making operational and quality process improvements in certain of our major production facilities. As such, affected products may experience temporary and occasional distribution delays while

we implement and validate these enhanced processes and generate the necessary supporting records. We believe that continued progress towards restoring full supply expected during the second quarter will enable our commercial teams to service existing customers and also resume executing against the full potential of our broad and diverse portfolio. As such, we expect volume/mix sales growth to improve as we progress through 2017.

Turning to cost of products sold, in 2016 we recognized significant expenses related to stepping up acquired Biomet inventory to fair value and for excess and obsolete inventory charges from our decision to discontinue certain products. Without these significant expenses, we expect cost of products sold will decrease in 2017. Additionally, due to the two year moratorium on the U.S. medical device excise tax, costs of products sold will decrease. However, we believe we will experience unfavorable effects on costs of products sold as a percentage of sales from declining selling prices, as well as from lower hedge gains expected to be recognized in 2017 when compared to 2016.

As it relates to other expenses, our intangible asset amortization expense is expected to increase as we recognize a full year of intangible asset amortization from the LDR merger and other 2016 acquisitions. We expect research and development (“R&D”) expense for the year to be

approximately 4.5 percent of sales. Selling, general and administrative (“SG&A”) expense is expected to approximate 37.5 percent of sales, which is an improvement from 2016 as we expect to realize synergies from our acquisitions and leverage sales growth. We estimate special items expense will continue to be significant as we continue our integration activities as well as harmonize and optimize our supply chain and manufacturing and quality systems. However, we expect special items expense will be less in 2017 compared to 2016. We expect interest expense will decrease in 2017 compared to 2016 due to lower debt levels from planned debt repayments.

RESULTS OF OPERATIONS

We analyze sales by three geographies, the Americas, EMEA and Asia Pacific, and by the following product categories: Knees, Hips, S.E.T., Dental, Spine & CMF and Other. This sales analysis differs from our reportable operating segments, which are based upon our senior management organizational structure and how we allocate resources towards achieving operating profit goals. We analyze sales by geography because the underlying market trends in any particular geography tend to be similar across product categories and because we primarily sell the same products in all geographies.