Attached files

file filename
EX-32.B - EXHIBIT 32.B Q3 2016 - CORE MOLDING TECHNOLOGIES INCex32b93016.htm
EX-32.A - EXHIBIT 32.A Q3 2016 - CORE MOLDING TECHNOLOGIES INCex32a93016.htm
EX-31.B - EXHIBIT 31.B Q3 2016 - CORE MOLDING TECHNOLOGIES INCex31b93016.htm
EX-31.A - EXHIBIT 31.A Q3 2016 - CORE MOLDING TECHNOLOGIES INCex31a93016.htm
 
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-Q
þ
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the quarterly period ended September 30, 2016
OR
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
for the transition period from                      To                     
Commission File Number 001-12505
CORE MOLDING TECHNOLOGIES, INC.
___________________________________________________________________________________
(Exact name of registrant as specified in its charter)
Delaware
 
31-1481870
(State or other jurisdiction
incorporation or organization)
 
(I.R.S. Employer Identification No.)
800 Manor Park Drive, Columbus, Ohio
 
43228-0183
(Address of principal executive office)
 
(Zip Code)
Registrant’s telephone number, including area code (614) 870-5000
N/A
_______________________________________________________________
Former name, former address and former fiscal year, if changed since last report.
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes þ No o
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes þ No o
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definition of “accelerated filer,” “large accelerated filer,” and “smaller reporting company,” in Rule 12b-2 of the Exchange Act (Check one).
Large accelerated filer o
 
Accelerated filer þ
 
Non-accelerated filer o
 
Smaller reporting company o
 
 
 
 
(Do not check if a smaller reporting company)
 
 
Indicate by check mark whether the registrant is a shell company as defined in Rule 12b-2 of the Exchange Act. Yes o No þ
As of November 3, 2016, the latest practicable date, 7,791,483 shares of the registrant’s common stock were issued and outstanding.
 



Table of Contents


 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 


2


Item 1. Financial Statements
Part I — Financial Information
Core Molding Technologies, Inc. and Subsidiaries
Consolidated Balance Sheets
 
September 30, 2016
 
December 31, 2015
 
(Unaudited)
 

Assets:
 
 
 
Current assets:
 
 
 
Cash and cash equivalents
$
24,311,000

 
$
8,943,000

Accounts receivable (less allowance for doubtful accounts: September 30, 2016 - $1,000; December 31, 2015 - $40,000)
21,190,000

 
36,886,000

Inventories:
 
 
 
Finished goods
1,560,000

 
1,646,000

Work in process
1,163,000

 
1,516,000

Raw materials and components
8,602,000

 
10,535,000

Total inventories, net
11,325,000

 
13,697,000

 
 
 
 
Deferred tax asset-current portion
1,575,000

 
1,598,000

Foreign sales tax receivable
226,000

 
280,000

Income taxes receivable

 
670,000

Prepaid expenses and other current assets
985,000

 
610,000

Total current assets
59,612,000

 
62,684,000

 
 
 
 
Property, plant and equipment — net
71,212,000

 
74,103,000

Goodwill
2,403,000

 
2,403,000

Intangibles, net
575,000

 
613,000

Total Assets
$
133,802,000

 
$
139,803,000

 
 
 
 
Liabilities and Stockholders’ Equity:
 
 
 
Current liabilities:
 
 
 
Current portion of long-term debt
3,000,000

 
3,714,000

Accounts payable
9,704,000

 
13,481,000

Tooling in progress
1,072,000


2,271,000

Current portion of post retirement benefits liability
1,088,000

 
1,088,000

Accrued liabilities:
 
 
 
Compensation and related benefits
5,187,000

 
8,474,000

Taxes
168,000

 
203,000

Other
1,333,000

 
1,919,000

Total current liabilities
21,552,000

 
31,150,000

 
 
 
 
Long-term debt
7,500,000

 
9,750,000

Deferred tax liability
2,252,000

 
2,252,000

Post retirement benefits liability
7,890,000

 
7,918,000

Total Liabilities
39,194,000

 
51,070,000

Commitments and Contingencies

 

Stockholders’ Equity:
 
 
 
Preferred stock — $0.01 par value, authorized shares — 10,000,000; outstanding shares: 0 at September 30, 2016 and December 31, 2015

 

Common stock — $0.01 par value, authorized shares – 20,000,000; outstanding shares: 7,635,093 at September 30, 2016 and 7,596,500 at December 31, 2015
76,000

 
76,000

Paid-in capital
29,909,000

 
29,147,000

Accumulated other comprehensive income, net of income taxes
2,513,000

 
2,645,000

Treasury stock
(27,781,000
)
 
(27,647,000
)
Retained earnings
89,891,000

 
84,512,000

Total Stockholders’ Equity
94,608,000

 
88,733,000

Total Liabilities and Stockholders’ Equity
$
133,802,000

 
$
139,803,000

See notes to unaudited consolidated financial statements.

3


Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Income
(Unaudited)

 
Three Months Ended

Nine Months Ended
 
September 30,

September 30,
 
2016

2015

2016
 
2015
Net sales:
 
 

 
 
 
 
Products
$
33,816,000

 
$
44,243,000

 
$
113,159,000

 
$
145,612,000

Tooling
7,520,000

 
3,806,000

 
12,651,000

 
6,893,000

Total net sales
41,336,000

 
48,049,000

 
125,810,000

 
152,505,000

 
 
 
 
 
 
 
 
Total cost of sales
35,755,000

 
39,738,000

 
105,043,000

 
124,186,000

 
 
 
 
 
 
 
 
Gross margin
5,581,000


8,311,000


20,767,000


28,319,000

 
 
 
 
 
 
 
 
Total selling, general and administrative expense
3,924,000

 
4,409,000

 
12,361,000

 
13,294,000

 
 
 
 
 
 
 
 
Operating Income
1,657,000

 
3,902,000

 
8,406,000

 
15,025,000

 
 
 
 
 
 
 
 
Interest expense
67,000

 
95,000

 
233,000

 
237,000

 
 
 
 
 
 
 
 
Income before taxes
1,590,000

 
3,807,000

 
8,173,000

 
14,788,000

 
 
 
 
 
 
 
 
Income tax expense
561,000


1,323,000


2,794,000


5,069,000

 
 
 
 
 
 
 
 
Net income
$
1,029,000


$
2,484,000


$
5,379,000


$
9,719,000

 
 
 
 
 
 
 
 
Net income per common share:
 
 
 
 
 
 
 
Basic
$
0.13


$
0.33


$
0.71


$
1.28

Diluted
$
0.13


$
0.33


$
0.70


$
1.27

Weighted average shares outstanding:
 
 
 
 
 
 
 
Basic
7,635,000


7,597,000


7,616,000


7,578,000

Diluted
7,667,000


7,625,000


7,649,000


7,623,000

See notes to unaudited consolidated financial statements.


4



Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Comprehensive Income
(Unaudited)


 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2016
 
2015
 
2016
 
2015
Net income
$
1,029,000

 
$
2,484,000

 
$
5,379,000

 
$
9,719,000

 
 
 
 
 
 
 
 
Other comprehensive income:
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Foreign currency hedge:
 
 
 
 
 
 
 
Unrealized foreign currency hedge gain
67,000

 

 
67,000

 

Income tax expense
(23,000
)
 

 
(23,000
)
 

 
 
 
 
 
 
 
 
Interest rate swaps:
 
 
 
 
 
 
 
Adjustment for amortization of losses included in net income

 
6,000

 
5,000

 
16,000

Income tax expense

 
(2,000
)
 
(2,000
)
 
(5,000
)
 
 
 
 
 
 
 
 
Post retirement benefit plan adjustments:
 
 
 
 
 
 
 
Net actuarial loss
38,000

 
42,000

 
116,000

 
126,000

Prior service costs
(124,000
)
 
(124,000
)
 
(372,000
)
 
(372,000
)
   Income tax benefit
26,000

 
24,000

 
77,000

 
73,000

 
 
 
 
 
 
 
 
Comprehensive income
$
1,013,000

 
$
2,430,000

 
$
5,247,000

 
$
9,557,000

See notes to unaudited consolidated financial statements.

5


Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statement of Stockholders’ Equity
(Unaudited)

 
Common Stock
Outstanding
 
Paid-In
Capital
 
Accumulated
Other
Comprehensive
Income
 
Treasury Stock
 
Retained
Earnings
 
Total
Stockholders’
Equity
 
Shares
 
Amount
 
 
 
 
Balance at December 31, 2015
7,596,500

 
$
76,000

 
$
29,147,000

 
$
2,645,000

 
$
(27,647,000
)
 
$
84,512,000

 
$
88,733,000

Net income
 
 
 
 
 
 
 
 
 
 
5,379,000

 
5,379,000

Change in post retirement benefits, net of tax of $77,000
 
 
 
 
 
 
(179,000
)
 
 
 
 
 
(179,000
)
Unrealized foreign currency hedge gain, net of tax of $23,000
 
 
 
 
 
 
44,000

 
 
 
 
 
44,000

Change in interest rate swaps, net of tax of $2,000
 
 
 
 
 
 
3,000

 
 
 
 
 
3,000

Purchase of treasury stock
(10,590
)
 
 
 
 
 
 
 
(134,000
)
 
 
 
(134,000
)
Excess tax expense - equity transaction
 
 
 
 
(16,000
)
 
 
 
 
 
 
 
(16,000
)
Restricted stock vested
49,183

 
 
 
 
 
 
 
 
 
 
 

Share-based compensation
 
 
 
 
778,000

 
 
 
 
 
 
 
778,000

Balance at September 30, 2016
7,635,093

 
$
76,000

 
$
29,909,000

 
$
2,513,000

 
$
(27,781,000
)
 
$
89,891,000

 
$
94,608,000


See notes to unaudited consolidated financial statements.


6


Core Molding Technologies, Inc. and Subsidiaries
Consolidated Statements of Cash Flows
(Unaudited)
 
Nine Months Ended
 
September 30,
 
2016
 
2015
Cash flows from operating activities:
 
 
 
Net income
$
5,379,000

 
$
9,719,000

 
 
 
 
Adjustments to reconcile net income to net cash provided by operating activities:
 
 
 
Depreciation and amortization
4,658,000

 
4,506,000

Interest rate swaps — mark-to-market and amortization of losses
3,000

 
(14,000
)
Share-based compensation
778,000

 
605,000

(Gain) Loss on foreign currency translation and transactions
(51,000
)
 
56,000

Change in operating assets and liabilities, net of effects of acquisition:

 
 
Accounts receivable
15,696,000

 
(3,088,000
)
Inventories
2,372,000

 
(323,000
)
Prepaid and other assets
(270,000
)
 
1,023,000

Accounts payable
(3,538,000
)
 
2,144,000

Taxes receivable
670,000

 
2,286,000

Accrued and other liabilities
(5,030,000
)
 
(6,941,000
)
Post retirement benefits liability
(284,000
)
 
(359,000
)
Net cash provided by operating activities
20,383,000

 
9,614,000

 
 
 
 
Cash flows from investing activities:
 
 
 
Purchase of property, plant and equipment
(1,901,000
)
 
(4,041,000
)
Purchase of assets of CPI Binani Inc.

 
(14,512,000
)
Net cash used in investing activities
(1,901,000
)
 
(18,553,000
)
 
 
 
 
Cash flows from financing activities:
 
 
 
Gross repayments on revolving line of credit

 
(10,102,000
)
Gross borrowings on revolving line of credit

 
7,334,000

Proceeds from term loan

 
15,500,000

Payment of principal on term loan
(2,250,000
)
 
(2,000,000
)
Payment of principal on capex loan
(714,000
)
 
(1,285,000
)
Excess tax (payable) benefit from equity plans
(16,000
)
 
148,000

Payments related to the purchase of treasury stock
(134,000
)
 
(287,000
)
Proceeds from issuance of common stock

 
19,000

Net cash (used in) provided by financing activities
(3,114,000
)
 
9,327,000

 
 
 
 
Net change in cash and cash equivalents
15,368,000

 
388,000

 
 
 
 
Cash and cash equivalents at beginning of period
8,943,000

 
2,312,000

 
 
 
 
Cash and cash equivalents at end of period
$
24,311,000

 
$
2,700,000

 
 
 
 
Cash paid for:
 
 
 
Interest (net of amounts capitalized)
$
225,000

 
$
198,000

Income taxes
$
1,882,000

 
$
3,590,000

Non Cash:
 
 
 
Fixed asset purchases in accounts payable
$
452,000

 
$
270,000

See notes to unaudited consolidated financial statements.

7


Core Molding Technologies, Inc. and Subsidiaries
Notes to Consolidated Financial Statements
(Unaudited)

1. Basis of Presentation

The accompanying unaudited consolidated financial statements have been prepared in accordance with the instructions to Form 10-Q and include all of the information and disclosures required by accounting principles generally accepted in the United States of America for interim reporting, which are less than those required for annual reporting. In the opinion of management, the accompanying unaudited consolidated financial statements contain all adjustments (all of which are normal and recurring in nature) necessary to present fairly the financial position of Core Molding Technologies, Inc. and its subsidiaries (“Core Molding Technologies” or the “Company”) at September 30, 2016, and the results of operations and cash flows for the nine months ended September 30, 2016. The “Notes to Consolidated Financial Statements” contained in the Company's 2015 Annual Report to Shareholders, should be read in conjunction with these consolidated financial statements.

Core Molding Technologies and its subsidiaries operate in the plastics market in a family of products known as “reinforced plastics.” Reinforced plastics are combinations of resins and reinforcing fibers (typically glass or carbon) that are molded to shape. Core Molding Technologies is a manufacturer of sheet molding compound ("SMC") and molder of fiberglass reinforced plastics. The Company specializes in large-format moldings and offers a wide range of fiberglass processes, including compression molding of SMC, glass mat thermoplastics, bulk molding compounds and direct long-fiber thermoplastics, spray-up, hand-lay-up, and resin transfer molding. Additionally, the Company offers reaction injection molding, utilizing dicyclopentadiene technology. Core Molding Technologies maintains five production facilities in Columbus, Ohio; Batavia, Ohio; Gaffney, South Carolina; Winona, Minnesota and Matamoros, Mexico.

The Company operates in one business segment as a manufacturer of SMC and molder of fiberglass reinforced plastics. The Company produces and sells SMC and molded products for varied markets, including light, medium and heavy-duty trucks, automobiles and automotive aftermarket, marine, construction and other commercial products.

2. Net Income per Common Share
Basic net income per common share is computed based on the weighted average number of common shares outstanding during the period. Diluted net income per common share is computed similarly but includes the effect of the assumed exercise of restricted stock under the treasury stock method.
The computation of basic and diluted net income per common share is as follows:

 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2016
 
2015
 
2016
 
2015
Net income
$
1,029,000

 
$
2,484,000

 
$
5,379,000

 
$
9,719,000

 
 
 
 
 
 
 
 
Weighted average common shares outstanding — basic
7,635,000

 
7,597,000

 
7,616,000

 
7,578,000

Effect of dilutive securities
32,000

 
28,000

 
33,000

 
45,000

Weighted average common and potentially issuable common shares outstanding — diluted
7,667,000

 
7,625,000

 
7,649,000

 
7,623,000

 
 
 
 
 
 
 
 
Basic net income per common share
$
0.13

 
$
0.33

 
$
0.71

 
$
1.28

Diluted net income per common share
$
0.13

 
$
0.33

 
$
0.70

 
$
1.27



8


3. Major Customers
Core Molding Technologies has four major customers, Navistar, Inc. (“Navistar”), Volvo Group North America, LLC (“Volvo”), PACCAR, Inc. (“PACCAR”) and Yamaha Motor Manufacturing Corporation (“Yamaha”). Major customers are defined as customers whose sales individually consist of more than ten percent of total sales during any reporting period in the current year. The following table presents sales revenue for the above-mentioned customers for the three and nine months ended September 30, 2016 and 2015:
 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2016
 
2015
 
2016
 
2015
Navistar product sales
$
9,575,000

 
$
12,219,000

 
$
31,304,000

 
$
38,520,000

Navistar tooling sales
470,000

 
2,325,000

 
1,166,000

 
3,373,000

Total Navistar sales
10,045,000

 
14,544,000

 
32,470,000

 
41,893,000

 
 
 
 
 
 
 
 
Volvo product sales
6,337,000

 
13,080,000

 
23,465,000

 
41,720,000

Volvo tooling sales
5,353,000

 
387,000

 
5,801,000

 
1,585,000

Total Volvo sales
11,690,000

 
13,467,000

 
29,266,000

 
43,305,000

 
 
 
 
 
 
 
 
PACCAR product sales
6,887,000

 
8,409,000

 
18,434,000

 
27,567,000

PACCAR tooling sales
18,000

 
63,000

 
3,454,000

 
819,000

Total PACCAR sales
6,905,000

 
8,472,000

 
21,888,000

 
28,386,000

 
 
 
 
 
 
 
 
Yamaha product sales
3,602,000

 
2,067,000

 
11,658,000

 
11,551,000

Yamaha tooling sales

 

 

 

Total Yamaha sales
3,602,000

 
2,067,000

 
11,658,000

 
11,551,000

 
 
 
 
 
 
 
 
Other product sales
7,415,000

 
8,468,000

 
28,298,000

 
26,254,000

Other tooling sales
1,679,000

 
1,031,000

 
2,230,000

 
1,116,000

Total other sales
9,094,000

 
9,499,000

 
30,528,000

 
27,370,000

 
 
 
 
 
 
 
 
Total product sales
33,816,000

 
44,243,000

 
113,159,000

 
145,612,000

Total tooling sales
7,520,000

 
3,806,000

 
12,651,000

 
6,893,000

Total sales
$
41,336,000

 
$
48,049,000

 
$
125,810,000

 
$
152,505,000



4. Property, Plant & Equipment

Property, plant and equipment consisted of the following for the periods specified:
 
September 30, 2016
 
December 31, 2015
Property, plant and equipment
$
139,885,000

 
$
137,996,000

Accumulated depreciation
(68,673,000
)
 
(63,893,000
)
Property, plant and equipment — net
$
71,212,000

 
$
74,103,000


Property, plant, and equipment are recorded at cost, unless obtained through acquisition, then assets are recorded at estimated fair value at the date of acquisition. Depreciation is provided on a straight-line method over the estimated useful lives of the assets. The carrying amount of long-lived assets is evaluated annually to determine if an adjustment to the depreciation period or to the unamortized balance is warranted. Amounts invested in capital additions in progress were $1,516,000 and $2,331,000 at September 30, 2016 and December 31, 2015, respectively. The Company capitalized $0 and $2,000 of interest expense for the nine months ended September 30, 2016 and 2015, respectively. At September 30, 2016 and December 31, 2015, purchase commitments for capital expenditures in progress were $1,013,000 and $1,102,000, respectively.


9


5. Acquisition of CPI
On March 20, 2015, the Company acquired substantially all of the assets of CPI Binani, Inc., a wholly owned subsidiary of Binani Industries Limited, located in Winona, Minnesota for a cash purchase price of $15,000,000, which expanded the Company's capabilities to include D-LFT and diversified the customer base. The purchase price was subject to working capital adjustments resulting in a reduction in the purchase price of $488,000.
Cash paid at closing was financed through borrowings under the Company's existing credit facility, as amended and further described in Note 8 below.
Consideration was allocated to assets acquired and liabilities assumed based on their fair values as of the acquisition date as follows:
Accounts Receivable
 
$
1,615,000

Inventory
 
675,000

Other Current Assets
 
171,000

Property and Equipment
 
12,474,000

Intangibles
 
650,000

Goodwill
 
1,306,000

Accounts Payable
 
(2,277,000
)
Other Current Liabilities
 
(102,000
)
 
 
$
14,512,000

The purchase price included consideration for strategic benefits, including an assembled workforce, operational infrastructure and synergistic revenue opportunities, which resulted in the recognition of goodwill. The goodwill is deductible for income tax purposes.
The acquisition was not considered significant to the Company's consolidated balance sheet and results of operations. Accordingly, no pro-forma results are provided prior to the effective date of the acquisition. The Company incurred $303,000 of expense for the nine months ended September 30, 2015 associated with the acquisition, which was recorded in selling, general and administrative expense.

6. Goodwill and Intangibles

Goodwill activity for the nine months ended September 30, 2016 consisted of the following:
Balance at December 31, 2015
 
$
2,403,000

Additions
 

Impairment
 

Balance at September 30, 2016
 
$
2,403,000


Intangible assets at September 30, 2016 were comprised of the following:
Definite-lived Intangible Assets
 
Amortization Period
 
Gross Carrying Amount
 
Accumulated Amortization
 
Net Carrying Amount
Trade Name
 
25 years
 
$
250,000

 
$
(15,000
)
 
$
235,000

Customer Relationships
 
10 years
 
400,000

 
(60,000
)
 
340,000

 
 
 
 
$
650,000

 
$
(75,000
)
 
$
575,000


The aggregate intangible asset amortization expense was $13,000 for each of the three months ended September 30, 2016 and 2015. For the nine months ended September 30, 2016 and 2015, the aggregate intangible asset amortization expense was $38,000 and $25,000, respectively.

10


7. Post Retirement Benefits
The components of expense for Core Molding Technologies’ post-retirement benefit plans for the three and nine months ended September 30, 2016 and 2015 are as follows:
 
Three Months Ended
 
Nine Months Ended
 
September 30,
 
September 30,
 
2016
 
2015
 
2016
 
2015
Pension expense:
 
 
 
 
 
 
 
Multi-employer plan
$
168,000

 
$
218,000

 
$
538,000

 
$
646,000

Defined contribution plan
165,000

 
222,000

 
578,000

 
629,000

Total pension expense
333,000

 
440,000

 
1,116,000

 
1,275,000

 
 
 
 
 
 
 
 
Health and life insurance:
 
 
 
 
 
 
 
Interest cost
81,000

 
79,000

 
243,000

 
237,000

Amortization of prior service costs
(124,000
)
 
(124,000
)
 
(372,000
)
 
(372,000
)
Amortization of net loss
38,000

 
42,000

 
116,000

 
126,000

Net periodic benefit cost
(5,000
)
 
(3,000
)
 
(13,000
)
 
(9,000
)
 
 
 
 
 
 
 
 
Total post retirement benefits expense
$
328,000

 
$
437,000

 
$
1,103,000

 
$
1,266,000


The Company made payments of $1,273,000 to pension plans and $271,000 for post-retirement healthcare and life insurance during the nine months ended September 30, 2016. For the remainder of 2016, the Company expects to make approximately $218,000 of pension plan payments, of which $66,000 was accrued at September 30, 2016. The Company also expects to make approximately $136,000 of post-retirement healthcare and life insurance payments for the remainder of 2016, all of which were accrued at September 30, 2016.

8. Debt
Debt consists of the following:
 
September 30,
2016
 
December 31,
2015
Term loan payable to Key Bank, interest at a variable rate (2.36% at September 30, 2016 and 2.24% at December 31, 2015) with monthly payments of interest and principal through March 2020.
$
10,500,000

 
$
12,750,000

Capex loan payable to Key Bank, interest at a variable rate (2.04% at December 31, 2015) with monthly payments of interest and principal through May 2016.

 
714,000

Total
10,500,000

 
13,464,000

Less current portion
(3,000,000
)
 
(3,714,000
)
Long-term debt
$
7,500,000

 
$
9,750,000


Credit Agreement

In 2008, the Company and its wholly owned subsidiary, CoreComposites de Mexico, S. de R.L. de C.V., entered into a credit agreement (the “Credit Agreement”) with Key Bank National Association to refinance certain existing debt and borrow funds to finance the construction of the Company’s manufacturing facility in Mexico.

Under this Credit Agreement, as amended, the Company received certain loans, subject to the terms and conditions stated in the agreement, which included (1) a $12,000,000 Capex loan; (2) a $18,000,000 variable rate revolving line of credit. The Credit Agreement is secured by a guarantee of each U.S. subsidiary of the Company and by a lien on substantially all of the present and future assets of the Company and its U.S. subsidiaries, except that only 65% of the stock issued by CoreComposites de Mexico, S. de C.V. has been pledged.


11


On March 20, 2015, the Company and its wholly owned subsidiary, CoreComposites de Mexico, S. de R.L. de C.V., entered into a tenth amendment (the “Tenth Amendment”) to the Credit Agreement. Pursuant to the terms of the Tenth Amendment, the parties agreed to modify certain terms of the Credit Agreement. These modifications included an extension of the commitment period for the revolving line of credit to May 31, 2017 and an agreement to make a term loan in an original amount of $15,500,000 to finance the acquisition of CPI assets. On March 30, 2015, the Company repaid $500,000 of unused proceeds from the original term loan.

On June 21, 2016, the Company and its wholly owned subsidiary, Corecomposites de Mexico, S. DE R.L. DE C.V., entered into an eleventh amendment (the "Eleventh Amendment") to the Credit Agreement. Pursuant to the terms of the Eleventh Amendment, the parties agreed to modify certain terms of the Credit Agreement. These modifications included an extension of the commitment period on the revolving line of credit to May 31, 2018 and an increase in the letter of credit commitment from $100,000 to $250,000, as provided in the Credit Agreement.

Revolving Line of Credit

The $18,000,000 revolving line of credit is collateralized by all of the present and future assets of the Company and its U.S. subsidiaries (except that only 65% of the stock issued by CoreComposites de Mexico, S. de C.V. has been pledged). The revolving line of credit, as amended, is scheduled to mature on May 31, 2018.

Bank Covenants

The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of September 30, 2016, the Company was in compliance with its financial covenants associated with the loans made under the Credit Agreement as described above.
Interest Rate Swap
On December 18, 2008, the Company entered into an interest rate swap agreement that became effective May 1, 2009 and continued through May 2016, which was designated as a cash flow hedge of the $12,000,000 Capex loan. Under this agreement, the Company paid a fixed rate of 2.295% to the counterparty and received a variable rate equal to LIBOR. Effective March 31, 2009, the interest terms in the Company’s Credit Agreement related to the $12,000,000 Capex loan were amended. The Company then determined that this interest rate swap was no longer highly effective. As a result, the Company discontinued the use of hedge accounting effective as of March 31, 2009 related to this swap, and began recording mark-to-market adjustments within interest expense in the Company’s Consolidated Statements of Income. The pre-tax loss previously recognized in Accumulated Other Comprehensive Income, totaling $146,000 as of March 31, 2009, was amortized as an increase to interest expense of approximately $2,000 per month, or $1,000 net of tax, through March 31, 2016. The fair value of the swap as of September 30, 2016 and December 31, 2015 was a liability of $0 and $2,000, respectively. The Company recorded interest income of $0 and $9,000 for a mark-to-market adjustment of swap fair value for the three months ended September 30, 2016 and 2015, respectively, related to this swap. The Company recorded interest income for the nine months ended September 30, 2016 and 2015, of $2,000 and $30,000, respectively, for mark-to-market adjustments of this swap. The notional amount of the swap at September 30, 2016 and December 31, 2015 was $0 and $714,000, respectively.
Interest expense included $0 and $7,000 of expense for settlements related to the Company's swaps for the three months ended September 30, 2016 and 2015, respectively. For the nine months ended September 30, 2016 and 2015, interest expense included $2,000 and $27,000, respectively, of expense for settlements related to the Company's swap.

9. Income Taxes
The Company’s consolidated balance sheets include a net current deferred tax asset of $1,575,000 and $1,598,000 at September 30, 2016 and December 31, 2015, respectively, and a net non-current deferred tax liability of $2,252,000 at each of September 30, 2016 and December 31, 2015. The Company evaluates the balance of deferred tax assets that will be realized. Such evaluations are based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income.
Income tax expense for the nine months ended September 30, 2016 is estimated to be $2,794,000, or approximately 34% of income before income taxes. Income tax expense for the nine months ended September 30, 2015 was estimated to be $5,069,000, or approximately 34% of income before income taxes.
As of September 30, 2016 and December 31, 2015, the Company had no liability for unrecognized tax benefits. The Company does not anticipate that unrecognized tax benefits will significantly change within the next twelve months.

12


The Company files income tax returns in the U.S., Mexico and various state jurisdictions. The Company is no longer subject to U.S. federal and state income tax examinations by tax authorities for years prior to 2013, and is no longer subject to Mexican income tax examinations by Mexican authorities for years prior to 2011.


10. Share Based Compensation
The Company has a Long Term Equity Incentive Plan (the “2006 Plan”), as approved by the Company’s stockholders in May 2006 and as amended in May 2015. The 2006 Plan allows for grants to directors and employees of non-qualified stock options, incentive stock options, stock appreciation rights, restricted stock, performance shares, performance units and other incentive awards (“Stock Awards”) up to an aggregate of 3,000,000 awards, each representing a right to buy a share of Core Molding Technologies common stock. Stock Awards can be granted under the 2006 Plan through the earlier of December 31, 2025, or the date the maximum number of available awards under the 2006 Plan have been granted.
Restricted Stock
The Company grants shares of its common stock to certain directors, officers, and key managers in the form of unvested stock (“Restricted Stock”). These awards are recorded at the market value of Core Molding Technologies’ common stock on the date of issuance and amortized ratably as compensation expense over the applicable vesting period.
The following summarizes the status of Restricted Stock and changes during the nine months ended September 30, 2016:
 
Number of
Shares
 
Weighted Average
Grant Date
Fair Value
Unvested balance at December 31, 2015
112,907

 
$
16.86

Granted
121,092

 
12.55

Vested
(49,183
)
 
14.16

Forfeited
(28,426
)
 
15.93

Unvested balance at September 30, 2016
156,390

 
$
14.54

At September 30, 2016 and 2015, there was $1,580,000 and $1,449,000, respectively, of total unrecognized compensation expense related to Restricted Stock granted under the 2006 Plan. That cost is expected to be recognized over the weighted-average period of 1.6 years. Total compensation cost related to restricted stock grants for the three months ended September 30, 2016 and 2015 was $197,000 and $183,000, respectively, all of which was recorded to selling, general and administrative expense. Compensation cost related to restricted stock grants for the nine months ended September 30, 2016 and 2015 was $778,000 and $609,000, respectively, all of which was recorded to selling, general and administrative expense.

Compensation expense for restricted stock is recorded at the fair value at the time of the grant over the vesting period of the restricted stock grant. The Company does not receive a tax deduction for restricted stock until the restricted stock vests. The tax deduction for restricted stock is based on the fair market value as of the vesting date. Tax expense due for the fair market value as of the grant date in excess of the vested restricted stock was $16,000 for the nine months ended September 30, 2016. Tax benefits received for vested restricted stock in excess of the fair market value as of the grant date was $145,000 for the nine months ended September 30, 2015.
During the nine months ended September 30, 2016 and 2015, employees surrendered 10,590 and 12,141 shares, respectively, of the Company's common stock to satisfy income tax withholding obligations in connection with the vesting of restricted stock.
11. Fair Value of Financial Instruments

Fair value is defined as the price that would be received to sell an asset or paid to transfer a liability in a transaction between market participants as of the measurement date. Fair value is measured using the fair value hierarchy and related valuation methodologies as defined in the authoritative literature. This guidance provides a fair value framework that requires the categorization of assets and liabilities into three levels based upon the assumptions (inputs) used to price the assets or liabilities. Level 1 provides the most reliable measure of fair value, whereas Level 3 generally requires significant management judgment.

The three levels are defined as follows:

Level 1 -
Quoted prices in active markets for identical assets and liabilities.

13


Level 2 -
Quoted prices for similar instruments in active markets, quoted prices for identical or similar instruments in markets that are not active and model-derived valuations, in which all significant inputs are observable in active markets.
Level 3 -
Significant unobservable inputs reflecting management's own assumptions about the inputs used in pricing the asset or liability.

The Company’s financial instruments consist of debt, interest rate swaps, foreign currency derivatives, accounts receivable, and accounts payable. The carrying amount of these financial instruments approximated their fair value. During 2016, the Company had two Level 2 fair value measurements, which related to the Company’s interest rate swap and foreign currency derivatives.

Interest rate swap

The Company utilized interest rate swap contracts to manage its targeted mix of fixed and floating rate debt, and these swaps are valued using observable benchmark rates at commonly quoted intervals for the full term of the swaps (market approach). The interest rate swap, discussed in detail in Note 8, was deemed immaterial to the financial statements.

There were no non-recurring fair value measurements for the nine months ended September 30, 2016.

Derivative and hedging activities
The Company conducts business in Mexico and pays certain expenses in Mexican Pesos. The Company is exposed to foreign currency exchange risk between the U.S. dollar and the Mexican Peso, which could impact the Company’s operating income and cash flows. To mitigate risk associated with foreign currency exchange, the Company entered into forward contracts to exchange a fixed amount of U.S. dollars for a fixed amount of Mexican Pesos, which will be used to fund future peso cash flows. At inception, all forward contracts are formally documented as cash flow hedges and are measured at fair value each reporting period. Derivatives are formally assessed both at inception and at least quarterly thereafter, to ensure that derivatives used in hedging transactions are highly effective in offsetting changes in cash flows of the hedged item. If it is determined that a derivative ceases to be a highly effective hedge, or if the anticipated transaction is no longer probable of occurring, hedge accounting is discontinued, and any future mark-to-market adjustments are recognized in earnings. The effective portion of gain or loss is reported in other comprehensive income and the ineffective portion is reported in earnings. The impacts of these contracts were largely offset by gains and losses resulting from the impact of changes in exchange rates on transactions denominated in the Mexican Peso. As of September 30, 2016, the Company had no ineffective portion related to the cash flow hedges.
Financial statements impacts
The following tables detail amounts related to our derivatives designated as hedging instruments as of September 30, 2016:
 
Fair Values of Derivatives Instruments
 
Asset Derivatives
 
Liability Derivatives
 
Balance Sheet Location
 
Fair Value
 
Balance Sheet Location
 
Fair Value
Foreign exchange contracts
Prepaid expense other current assets
 
$
67,000

 
Accrued liabilities other
 
$

Notional contract values
 
 
$
5,772,000

 
 
 
$


The Company had no derivatives designated as hedging instruments as of December 31, 2015.












14


The following tables summarize the amount of unrealized / realized gain and loss recognized in Accumulated Comprehensive Income (AOCI) for the three months ended September 30, 2016 and 2015:
Derivatives in subtopic 815-20 Cash Flow Hedging Relationship

Amount of Unrealized Gain or (Loss) Recognized in Accumulated other Comprehensive Income on Derivative
 
Location of Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income(A)
 
Amount of Realized Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income


2016
2015

 
2016
2015
Foreign exchange contracts
 
$
67,000

$

 
Cost of goods sold
 
$

$

 
 
Sales, general and administrative expense
 
$

$


The following tables summarize the amount of unrealized / realized gain and loss recognized in Accumulated Comprehensive Income (AOCI) for the nine months ended September 30, 2016 and 2015:
Derivatives in subtopic 815-20 Cash Flow Hedging Relationship
 
Amount of Unrealized Gain or (Loss) Recognized in Accumulated other Comprehensive Income on Derivative
 
Location of Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income(A)
 
Amount of Realized Gain or (Loss) Reclassified from Accumulated Other Comprehensive Income
 
 
2016
2015
 
 
2016
2015
Foreign exchange contracts
 
$
67,000

$

 
Cost of goods sold
 
$

$

 
 
Sales, general and administrative expense
 
$

$


(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and sales, general and administrative expense based on the percentage of Mexican Peso spend.

12. Accumulated Other Comprehensive Income

The following table presents changes in Accumulated Other Comprehensive Income, net of tax, for the nine months ended September 30, 2016 and 2015:

2015:
Foreign Currency Derivative Activities(A)
Post Retirement Benefit Plan Items(B)
Accumulated Other Comprehensive Income
Balance at December 31, 2014
$

$
2,830,000

$
2,830,000

Other Comprehensive Income before reclassifications



Amounts reclassified from accumulated other comprehensive income

(230,000
)
(230,000
)
Income tax benefit

68,000

68,000

Balance at September 30, 2015
$

$
2,668,000

$
2,668,000

 
 
 
 
2016:
 
 
 
Balance at December 31, 2015
$

$
2,645,000

$
2,645,000

Other Comprehensive Income before reclassifications
67,000


67,000

Amounts reclassified from accumulated other comprehensive income

(251,000
)
(251,000
)
Income tax benefit (expense)
(23,000
)
75,000

52,000

Balance at September 30, 2016
$
44,000

$
2,469,000

$
2,513,000


(A) The foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is allocated to cost of goods sold and sales, general and administrative expense based on the percentage of Mexican Peso spend. The tax effect of the foreign currency derivative activity reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.

(B) The Company has historically disclosed both interest rate swap activity and post-retirement benefit activity, however due to immaterial interest rate swap activity the components have been combined. The effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in total cost of sales on the Consolidated Statements of Income. These Accumulated Other Comprehensive Income components are included in the computation of net periodic benefit cost (see Note 7 "Post Retirement Benefits" for additional details). The tax effect of post-retirement benefit items reclassified from Accumulated Other Comprehensive Income is included in income tax expense on the Consolidated Statements of Income.

15


13. Recent Accounting Pronouncements

In May 2014, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2014-09, Revenue from Contracts with Customers (Topic 606), which supersedes the revenue recognition requirements in ASC 605, Revenue Recognition. ASC Topic 606 is based on the principle that revenue is recognized to depict the transfer of goods or services to customers in an amount that reflects the consideration to which the entity expects to be entitled in exchange for those goods or services. ASC Topic 606 also requires additional disclosure about the nature, amount, timing and uncertainty of revenue and cash flows arising from customer contracts, including significant judgments and changes in judgments and assets recognized from costs incurred to obtain or fulfill a contract. The effective date for ASC Topic 606, as updated by ASU No. 2015-14 in August 2015, has been delayed until the first quarter of fiscal year 2018. The Company is currently assessing the transition alternatives and potential impact the pronouncement and adoption of ASC Topic 606 will have on the Company’s financial statements. Early adoption is permitted, but not before annual periods beginning after December 15, 2016.

In November 2015, the FASB issued ASU No. 2015-17, Balance Sheet Classification of Deferred Taxes (Topic 740). This update requires all deferred tax assets and liabilities, and any related valuation allowance, to be classified as noncurrent on the balance sheet. The ASU simplifies the current standard, which requires entities to separately present deferred tax assets and liabilities as current and noncurrent in a classified balance sheet. The ASU is effective for annual reporting periods beginning on or after December 15, 2016, and interim periods within those annual periods. Earlier application is permitted for all entities as of the beginning of an interim or annual reporting period. The Company will adopt this standard's update as required and does not expect the adoption of this ASU to have a material impact on our consolidated financial statements.

In February 2016, the FASB issued ASU No. 2016-02, Leases (Topic 842). This update requires organizations to recognize lease assets and lease liabilities on the balance sheet and also disclose key information about leasing arrangements. This ASU is effective for annual reporting periods beginning on or after December 15, 2018, and interim periods within those annual periods. Earlier application is permitted for all entities as of the beginning of an interim or annual period. The Company will adopt this standard's update as required and does not expect the adoption of this ASU to have a material impact on our consolidated financial statements.

In March 2016, the FASB issued ASU No. 2016-09, Compensation - Stock Compensation (Topic 718) ("ASU 2016-09") as part of the FASB simplification initiative. The new standard provides for changes to accounting for stock compensation including 1) excess tax benefits and tax deficiencies related to share based payment awards will be recognized as income tax expense in the reporting period in which they occur; 2) excess tax benefits will be classified as an operating activity in the statement of cash flow; 3) the option to elect to estimate forfeitures or account for them when they occur; and 4) increases the tax withholding requirement threshold to qualify for equity classification. The ASU is effective for public companies for annual periods, and interim periods within those annual periods, beginning after December 15, 2016 and early adoption is permitted. The Company is currently evaluating the impact that ASU 2016-09 will have on the consolidated financial statements.

In August 2016, FASB issued ASU No. 2016-15, Statement of Cash Flows (Topic 230): Classification of Certain Cash Receipts and Cash Payments ("ASU 2016-15"). The new standard provides clarification on the classification of the following eight specific cash flow issues: 1) debt prepayments or debt extinguishment costs, 2) settlement of zero-coupon debt instruments or other debt instruments with coupon interest rates that are insignificant in relation to the effective interest rate of borrowing, 3) contingent consideration payments made after a business combination, 4) proceeds from the settlement of insurance claims, 5) proceeds from the settlement of corporate-owned life insurance policies, including bank-owned life insurance policies, 6) distributions received from equity method investees, 7) beneficial interests in securitization transactions and 8) separately identifiable cash flows and application of the predominance principle. The ASU is effective for public companies for annual periods, and interim periods within those annual periods, beginning after December 15, 2017 and early adoption is permitted. The Company will adopt this standard update as required and does not expect the adoption of this ASU to have a material impact on our consolidated financial statements.

16


Part I — Financial Information

Item 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations

This Management's Discussion and Analysis of Financial Condition and Results of Operations contains forward-looking statements within the meaning of the federal securities laws. As a general matter, forward-looking statements are those focused upon future plans, objectives or performance as opposed to historical items and include statements of anticipated events or trends and expectations and beliefs relating to matters not historical in nature. Such forward-looking statements involve known and unknown risks and are subject to uncertainties and factors relating to Core Molding Technologies' operations and business environment, all of which are difficult to predict and many of which are beyond Core Molding Technologies' control. Words such as “may,” “will,” “could,” “would,” “should,” “anticipate,” “predict,” “potential,” “continue,” “expect,” “intend,” “plans,” “projects,” “believes,” “estimates,” “confident” and similar expressions are used to identify these forward-looking statements. These uncertainties and factors could cause Core Molding Technologies' actual results to differ materially from those matters expressed in or implied by such forward-looking statements. Except as required by law, Core Molding Technologies Inc. undertakes no obligation to update these forward looking statements.

Core Molding Technologies believes that the following factors, among others, could affect its future performance and cause actual results to differ materially from those expressed or implied by forward-looking statements made in this report: business conditions in the plastics, transportation, marine and commercial product industries (including slowdown in demand for truck production); federal and state regulations (including engine emission regulations); general economic, social and political environments in the countries in which Core Molding Technologies operates; safety and security conditions in Mexico; dependence upon certain major customers as the primary source of Core Molding Technologies’ sales revenues; efforts of Core Molding Technologies to expand its customer base; the ability to develop new and innovative products and to diversify markets, materials and processes and increase operational enhancements; the actions of competitors, customers, and suppliers; failure of Core Molding Technologies’ suppliers to perform their obligations; the availability of raw materials; inflationary pressures; new technologies; regulatory matters; labor relations; the loss or inability of Core Molding Technologies to attract and retain key personnel; the Company's ability to successfully identify, evaluate and manage potential acquisitions and to benefit from and properly integrate any completed acquisitions; federal, state and local environmental laws and regulations; the availability of capital; the ability of Core Molding Technologies to provide on-time delivery to customers, which may require additional shipping expenses to ensure on-time delivery or otherwise result in late fees; risk of cancellation or rescheduling of orders; management’s decision to pursue new products or businesses which involve additional costs, risks or capital expenditures; and other risks identified from time to time in Core Molding Technologies’ other public documents on file with the Securities and Exchange Commission, including those described in Item 1A of the 2015 Annual Report on Form 10-K.
Description of the Company

Core Molding Technologies is a manufacturer of sheet molding compound ("SMC") and molder of fiberglass reinforced plastics. The Company specializes in large-format moldings and offers a wide range of fiberglass processes, including compression molding of SMC, glass mat thermoplastics, bulk molding compounds and direct long-fiber thermoplastics (D-LFT); spray-up, hand-lay-up, and resin transfer molding ("RTM"). Additionally, the Company offers reaction injection molding, utilizing dicyclopentadiene technology. Core Molding Technologies serves a wide variety of markets, including medium and heavy-duty truck, marine, automotive, agriculture, construction and other commercial products. Product sales to heavy and medium-duty truck markets accounted for 69% and 78% of the Company’s sales for the nine months ended September 30, 2016 and 2015, respectively. The demand for Core Molding Technologies’ products is primarily affected by economic conditions in the United States, Canada, and Mexico. Core Molding Technologies’ manufacturing operations have a significant fixed cost component. Accordingly, during periods of changing demand, the profitability of Core Molding Technologies’ operations may change proportionately more than revenues from operations.

In 1996, Core Molding Technologies acquired substantially all of the assets and assumed certain liabilities of Columbus Plastics, a wholly owned operating unit of Navistar’s truck manufacturing division since its formation in late 1980. Columbus Plastics, located in Columbus, Ohio, was a compounder and compression molder of SMC. In 1998, Core Molding Technologies began operations at its second facility in Gaffney, South Carolina, and in 2001, the Company established a manufacturing presence in Mexico by acquiring certain assets of Airshield Corporation. As a result of this acquisition, Core Molding Technologies expanded its fiberglass molding capabilities to include the spray up, hand-lay-up open mold processes and RTM closed molding. In 2004, the Company acquired substantially all the operating assets of Keystone Restyling Products, Inc., a privately held manufacturer and distributor of fiberglass reinforced products for the automotive-aftermarket industry. In 2005, Core Molding Technologies acquired certain assets of the Cincinnati Fiberglass Division of Diversified Glass, Inc., a Batavia, Ohio-based, privately held manufacturer and distributor of fiberglass reinforced plastic components supplied primarily to the heavy-duty truck market. In 2009, the Company completed construction of a production facility in Matamoros, Mexico that replaced its leased facility. Most recently in 2015, the Company acquired substantially all of the assets of CPI Binani, Inc. ("CPI"), a wholly-owned subsidiary of

17


Binani Industries Limited, located in Winona, Minnesota, which expanded the Company's process capabilities to include D-LFT and diversified its customer base.
Overview

For the nine months ended September 30, 2016, the Company recorded net income of $5,379,000, or $0.71 per basic and $0.70 diluted share, compared with net income of $9,719,000, or $1.28 per basic and $1.27 per diluted share for the nine months ended September 30, 2015. Product sales for the nine months ended September 30, 2016 decreased approximately 22% to $113,159,000 as compared to $145,612,000 for the same period in 2015, primarily due to decreased demand from heavy duty truck customers, partially offset by additional sales from CPI, which was acquired in March 2015.

Looking forward we expect product sales to continue to be lower than prior year as industry analysts currently forecast North American heavy duty truck production levels in 2016 to be 30% below prior year and 2017 production levels to be 10% lower than 2016. As a result of the Company's industry diversification and new business efforts over the past several years, we expect the percentage decrease in total product sales in 2016 compared to 2015 to be less than the decrease in product sales to our heavy duty truck customers.

Results of Operations

Three Months Ended September 30, 2016, as Compared to Three Months Ended September 30, 2015

Net sales for the three months ended September 30, 2016 and 2015 totaled $41,336,000 and $48,049,000, respectively. Included in total sales were tooling project sales of $7,520,000 and $3,806,000 for the three months ended September 30, 2016 and 2015, respectively. Tooling project sales result primarily from customer approval and acceptance of molds and assembly equipment specific to their products as well as other non-production services. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, were approximately 24% lower for the three months ended September 30, 2016, as compared to the same period a year ago. This decrease in sales is primarily the result of lower demand from customers in the heavy duty truck market, partially offset by an increase in demand from customers in the marine market.

Sales to Navistar totaled $10,045,000 for the three months ended September 30, 2016, compared to $14,544,000 for the three months ended September 30, 2015. Included in total sales was $470,000 of tooling sales for the three months ended September 30, 2016 compared to $2,325,000 for the same three months in 2015. Product sales decreased 22% for the three months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand, partially offset by new business awards.

Sales to Volvo totaled $11,690,000 for the three months ended September 30, 2016, compared to $13,467,000 for the three months ended September 30, 2015. Included in total sales was $5,353,000 of tooling sales for the three months ended September 30, 2016 compared to $387,000 for the same three months in 2015. Product sales to Volvo decreased 52% for the three months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand.

Sales to PACCAR totaled $6,905,000 for the three months ended September 30, 2016, compared to $8,472,000 for the three months ended September 30, 2015. Included in total sales was $18,000 of tooling sales for the three months ended September 30, 2016 compared to $63,000 for the same three months in 2015. Product sales to PACCAR decreased 18% for the three months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand and lower sales for certain products reaching the end of their product life, which were partially offset by new business awards.

Sales to Yamaha totaled $3,602,000 for the three months ended September 30, 2016, compared to $2,067,000 for the three months ended September 30, 2015. Product sales to Yamaha increased 74% for the three months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand and timing of the customer's annual seasonal shutdown.

Sales to other customers for the three months ended September 30, 2016 totaled $9,094,000, compared to $9,499,000 for the three months ended September 30, 2015. Included in total sales was $1,679,000 of tooling sales for the three months ended September 30, 2016 compared to $1,031,000 for the same three months in 2015. Product sales to other customers decreased 12% for the three months ended September 30, 2016 as compared to the same period of the prior year, due a change in demand from other customers in the heavy truck and automotive markets.

Gross margin was approximately 13.5% of sales for the three months ended September 30, 2016, compared with 17.3% for the three months ended September 30, 2015. The gross margin decline, as a percent of sales, was due to an unfavorable net change

18


in production costs and product mix of 3.5%, lower fixed cost leverage of 0.9% related to the decrease in sales and unfavorable net changes in selling price and material costs of 0.2%, partially offset by favorable foreign exchange rate effect of 0.8%.

Selling, general and administrative expense (“SG&A”) was $3,924,000 for the three months ended September 30, 2016, compared to $4,409,000 for the three months ended September 30, 2015. The decrease in SG&A expense primarily resulted from lower profit sharing expense of $288,000 due to lower earnings and lower travel expense of $86,000.

Interest expense totaled $67,000 for the three months ended September 30, 2016, compared to interest expense of $95,000 for the three months ended September 30, 2015. The decrease in interest expense was primarily due to a lower average outstanding debt balance during the three months ended September 30, 2016, when compared to the same period in 2015.

Income tax expense for both the three months ended September 30, 2016 and 2015 was approximately 35% of total income before income taxes. The Company recorded net income for the three months ended September 30, 2016 of $1,029,000, or $0.13 per basic and diluted share, compared with net income of $2,484,000, or $0.33 per basic and diluted share, for the three months ended September 30, 2015.

Nine Months Ended September 30, 2016, as Compared to Nine Months Ended September 30, 2015

Net sales for the nine months ended September 30, 2016 and 2015 totaled $125,810,000 and $152,505,000, respectively. Included in total sales were tooling project sales of $12,651,000 and $6,893,000 for the nine months ended September 30, 2016 and 2015, respectively. Tooling project sales result primarily from customer approval and acceptance of molds and assembly equipment specific to their products as well as other non-production services. These sales are sporadic in nature and fluctuate in regard to scope and related revenue on a period-to-period basis. Product sales, excluding tooling project sales, were approximately 22% lower for the nine months ended September 30, 2016, as compared to the same period a year ago. This decrease in sales is primarily the result of lower demand from customers in the heavy truck market, partially offset by additional sales from CPI, which was acquired in March 2015.

Sales to Navistar totaled $32,470,000 for the nine months ended September 30, 2016, compared to $41,893,000 for the nine months ended September 30, 2015. Included in total sales was $1,166,000 of tooling sales for the nine months ended September 30, 2016 compared to $3,373,000 for the same nine months in 2015. Product sales decreased 19% for the nine months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand, partially offset by new business awards.

Sales to Volvo totaled $29,266,000 for the nine months ended September 30, 2016, compared to $43,305,000 for the nine months ended September 30, 2015. Included in total sales was $5,801,000 of tooling sales for the nine months ended September 30, 2016 compared to $1,585,000 for the same nine months in 2015. Product sales to Volvo decreased 44% for the nine months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand.

Sales to PACCAR totaled $21,888,000 for the nine months ended September 30, 2016, compared to $28,386,000 for the nine months ended September 30, 2015. Included in total sales was $3,454,000 of tooling sales for the nine months ended September 30, 2016 compared to $819,000 for the same nine months in 2015. Product sales to PACCAR decreased 33% for the nine months ended September 30, 2016 as compared to the same period in the prior year, due to lower sales for products reaching the end of their product life and a change in demand, partially offset by new business awards.

Sales to Yamaha totaled $11,658,000 for the nine months ended September 30, 2016, compared to $11,551,000 for the nine months ended September 30, 2015. Product sales to Yamaha increased 1% for the nine months ended September 30, 2016 as compared to the same period in the prior year, due to a change in demand.

Sales to other customers for the nine months ended September 30, 2016 totaled $30,528,000, compared to $27,370,000 for the nine months ended September 30, 2015. Included in total sales was $2,230,000 of tooling sales for the nine months ended September 30, 2016 compared to $1,116,000 for the same nine months in 2015. Product sales to other customers increased 8% for the nine months ended September 30, 2016 as compared to the same period in the prior year. The increase primarily relates to new sales due to a full nine months of sales from CPI, which was acquired in March 2015, partially offset by lower demand from other customers in the heavy truck market.

Gross margin was approximately 16.5% of sales for the nine months ended September 30, 2016, compared with 18.6% for the nine months ended September 30, 2015. The gross margin decline, as a percent of sales, was due to lower fixed cost leverage of 1.4% related to the decrease in sales and an unfavorable net change in production costs and product mix of 2.0%, partially offset by a favorable foreign exchange rate effect of 1.0% and favorable net changes in selling price and material costs of 0.3%.


19


Selling, general and administrative expense (“SG&A”) was $12,361,000 for the nine months ended September 30, 2016, compared to $13,294,000 for the nine months ended September 30, 2015. The decrease in SG&A expense primarily resulted from lower profit sharing expense of $1,045,000 and lower travel of $112,000. Partially offsetting these decreases were higher labor and benefit expenses of $350,000. In addition, SG&A expense in 2015 included a non-recurring miscellaneous gain of $90,000 associated with the collection of foreign sales tax receivables.

Interest expense totaled $233,000 for the nine months ended September 30, 2016, compared to interest expense of $237,000 for the nine months ended September 30, 2015. The decrease in interest expense was primarily due to a lower average outstanding debt balance in 2016.

Income tax expense for both the nine months ended September 30, 2016 and 2015 was approximately 34% of total income before income taxes. The Company recorded net income for the nine months ended September 30, 2016 of $5,379,000, or $0.71 per basic and $0.70 per diluted share, compared with net income of $9,719,000, or $1.28 per basic and $1.27 per diluted share, for the nine months ended September 30, 2015.


Liquidity and Capital Resources

The Company’s primary sources of funds have been cash generated from operating activities and borrowings from third parties. Primary cash requirements are for operating expenses, increases in working capital, capital expenditures, repayment of long-term debt and business acquisitions. The Company from time to time will enter in to foreign exchange contracts to mitigate risk of foreign exchange movements. As of September 30, 2016, the Company had outstanding foreign exchange contracts with notional amounts totaling $5,772,000, compared to none outstanding as of December 31, 2015.

Cash provided by operating activities for the nine months ended September 30, 2016 totaled $20,383,000. Net income of $5,379,000 positively impacted operating cash flows. Non-cash deductions of depreciation and amortization included in net income amounted to $4,658,000. Changes in working capital increased cash provided by operating activities by $9,900,000, which primarily related to decreases in accounts receivable and inventory, offset by decreases in accounts payable and accrued liabilities.

Cash used in investing activities for the nine months ended September 30, 2016 was $1,901,000, which all relate to purchases of property, plant and equipment. The Company anticipates spending up to $2,000,000 during the remainder of 2016 on property, plant and equipment purchases for all of the Company's operations. At September 30, 2016, purchase commitments for capital expenditures in progress were $1,013,000. The Company anticipates using cash from operations to finance this capital investment.

Cash used in financing activities for the nine months ended September 30, 2016 totaled $3,114,000, which primarily consisted of scheduled repayments of principal on the Company's outstanding Capex loan and Term loan of $2,964,000.

At September 30, 2016, the Company had $24,311,000 in cash on hand, and an available balance on the revolving line of credit of $18,000,000.
 
The Company is required to meet certain financial covenants included in the Credit Agreement with respect to leverage ratios, fixed charge ratios, capital expenditures as well as other customary affirmative and negative covenants. As of September 30, 2016, the Company was in compliance with its financial covenants.

Management regularly evaluates the Company’s ability to effectively meet its debt covenants. Based on the Company’s forecasts, which are based on industry analysts’ estimates of heavy and medium-duty truck production volumes, as well as other assumptions, management believes that the Company will be able to maintain compliance with its financial covenants for the next 12 months. Management believes that cash flow from operating activities and available borrowings under the Credit Agreement will be sufficient to meet the Company’s liquidity needs for the next 12 months. If a material adverse change in the financial position of Core Molding Technologies should occur, or if actual sales or expenses are substantially different than what has been forecasted, Core Molding Technologies’ liquidity and ability to obtain further financing to fund future operating and capital requirements could be negatively impacted.

Recent Accounting Pronouncements

For information on the impact of recently issued accounting pronouncements, see Note 13 "Recent Accounting Pronouncements," to the consolidated financial statements included herein.



20


Off-Balance Sheet Arrangements

The Company did not have any off-balance sheet arrangements as of September 30, 2016 or December 31, 2015.

The Company did not have or experience any  material changes outside the ordinary course of business as to contractual obligations, including long-term debt obligations, capital lease obligations, operating lease obligations, purchase obligations or other long-term liabilities reflected on the Company’s balance sheet under GAAP, as of September 30, 2016 or December 31, 2015.

Critical Accounting Policies and Estimates
Management’s Discussion and Analysis of Financial Condition and Results of Operations discuss the Company’s consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these consolidated financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and the disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period. On an on-going basis, management evaluates its estimates and judgments. Management bases its estimates and judgments on historical experience and on various other factors that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.
Management believes the following critical accounting policies, among others, affect its more significant judgments and estimates used in the preparation of its consolidated financial statements.
Accounts receivable allowances: Management maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. If the financial condition of the Company’s customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required. The Company recorded an allowance for doubtful accounts of $1,000 and $40,000 at September 30, 2016 and December 31, 2015, respectively. Management also records estimates for chargebacks for customer returns and deductions, discounts offered to customers, and price adjustments. Should customer chargebacks fluctuate from the estimated amounts, additional allowances may be required. The Company reduced accounts receivable for chargebacks by $259,000 at September 30, 2016 and $523,000 at December 31, 2015.
Inventories: Inventories, which include material, labor and manufacturing overhead, are valued at the lower of cost or market. The inventories are accounted for using the first-in, first-out (FIFO) method of determining inventory costs. Inventory quantities on-hand are regularly reviewed, and where necessary, provisions for excess and obsolete inventory are recorded based on historical and anticipated usage. The Company has recorded an allowance for slow moving and obsolete inventory of $790,000 at September 30, 2016 and $863,000 at December 31, 2015.
Derivative instruments: Derivative instruments are utilized to manage exposure to fluctuations in the United States dollar to Mexican peso exchange rate. All derivative instruments are formally documented as cash flow hedges and are recorded at fair value at each reporting period. Gains and losses related to currency forward contracts are deferred and recorded as a component of Accumulated Other Comprehensive Income in the Consolidated Statement of Stockholders' Equity and then subsequently recognized in the Consolidated Statement of Income when the hedged item affects net income. The ineffective portion of the change in fair value of a hedge is recognized in income immediately. For additional information on derivative instruments, see Note 11.
Long-Lived Assets: Long-lived assets consist primarily of property, plant and equipment and definite-lived intangibles. The recoverability of long-lived assets is evaluated by an analysis of operating results and consideration of other significant events or changes in the business environment. The Company evaluates whether impairment exists for property, plant and equipment on the basis of undiscounted expected future cash flows from operations before interest. There was no impairment of the Company's long-lived assets for the nine months ended September 30, 2016 or September 30, 2015.
Goodwill and Other Intangibles: The Company has recorded $2,403,000 of goodwill as a result of two acquisitions. In 2001, the Company acquired certain assets of Airshield Corporation, and as a result, recorded goodwill in the amount of $1,097,000. The Company also acquired substantially all of the assets of CPI on March 20, 2015, which resulted in approximately $1,306,000 of goodwill.


21




If the Company's fair value is determined to be more likely than not impaired based on the one-step qualitative approach, a quantitative valuation to estimate the fair value of the Company is performed. Fair value measurements are based on a projected discounted cash flow valuation model, in accordance with ASC 350, “Intangibles-Goodwill and Other.”

There was no impairment of the Company's goodwill for the year ended December 31, 2015, and no indicators of impairment for the nine months ended September 30, 2016.
Self-Insurance: The Company is self-insured with respect to its Columbus and Batavia, Ohio, Gaffney, South Carolina and Brownsville, Texas medical, dental and vision claims and Columbus and Batavia, Ohio workers’ compensation claims, all of which are subject to stop-loss insurance thresholds. The Company has recorded an estimated liability for self-insured medical and dental claims incurred but not reported and worker’s compensation claims incurred but not reported at September 30, 2016 and December 31, 2015 of $1,190,000 and $1,074,000, respectively.
Post-retirement benefits: Management records an accrual for post-retirement costs associated with the health care plan sponsored by Core Molding Technologies. Should actual results differ from the assumptions used to determine the reserves, additional provisions may be required. In particular, increases in future healthcare costs above the assumptions could have an adverse effect on Core Molding Technologies’ operations. The effect of a change in healthcare costs is described in Note 12 of the Notes to Consolidated Financial Statements contained in the Company's 2015 Annual Report to Shareholders on Form 10-K. Core Molding Technologies had a liability for post retirement healthcare benefits based on actuarially computed estimates of $8,978,000 at September 30, 2016 and $9,006,000 at December 31, 2015.
Revenue Recognition: Revenue from product sales is recognized at the time products are shipped and title transfers. Allowances for returned products and other credits are estimated and recorded as revenue is recognized. Tooling revenue is recognized when the customer approves the tool and accepts ownership. Progress billings and expenses are shown net as an asset or liability on the Company’s Consolidated Balance Sheet. Tooling in progress can fluctuate significantly from period to period and is dependent upon the stage of tooling projects and the related billing and expense payment timetable for individual projects and therefore does not necessarily reflect projected income or loss from tooling projects. At September 30, 2016, the Company had a net liability related to tooling in progress of $1,072,000, which represented approximately $21,997,000 of progress tooling billings and $20,925,000 of progress tooling expenses. At December 31, 2015, the Company had a net liability related to tooling in progress of $2,271,000, which represented approximately $21,967,000 of progress tooling billings and $19,696,000 of progress tooling expenses.
Income taxes: The Company’s consolidated balance sheets include a net current deferred tax asset of $1,575,000 and $1,598,000 at September 30, 2016 and December 31, 2015, respectively, and a net non-current deferred tax liability of $2,252,000 at each of September 30, 2016 and December 31, 2015. The Company evaluates the balance of deferred tax assets that will be realized. Such evaluations are based on the premise that the Company is more likely than not to realize deferred tax benefits through the generation of future taxable income. For more information, refer to Note 11 of the Notes to Consolidated Financial Statements contained in the Company's 2015 Annual Report to Shareholders on Form 10-K.



22



Part I — Financial Information

Item 3.
Quantitative and Qualitative Disclosures About Market Risk
Core Molding Technologies’ primary market risk results from changes in the price of commodities used in its manufacturing operations. Core Molding Technologies is also exposed to fluctuations in interest rates and foreign currency fluctuations associated with the Mexican Peso. Core Molding Technologies does not hold any material market risk sensitive instruments for trading purposes. The Company may use derivative financial instruments to hedge exposure to fluctuations in foreign exchange rates and interest rates.
Core Molding Technologies has the following three items that are sensitive to market risks: (1) Revolving Line of Credit and Term Loan under the Credit Agreement, which bears a variable interest rate; (2) foreign currency purchases in which the Company purchases Mexican pesos with United States dollars to meet certain obligations that arise due to operations at the facility located in Mexico; and (3) raw material purchases in which Core Molding Technologies purchases various resins and fiberglass for use in production. The prices and availability of these materials are affected by the prices of crude oil and natural gas as well as processing capacity versus demand.
Assuming a hypothetical 10% increase in commodity prices, Core Molding Technologies would be impacted by an increase in raw material costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% decrease in the United States dollar to Mexican Peso exchange rate, the Company would be impacted by an increase in operating costs, which would have an adverse effect on operating margins.
Assuming a hypothetical 10% change in short-term interest rates, interest paid on the Term Loan would have been impacted, as the interest rate on these loans is based upon LIBOR. It would not, however, have a material effect on earnings before tax.

23



Part I — Financial Information

Item 4.
Controls and Procedures
As of the end of the period covered by this report, the Company has carried out an evaluation, under the supervision and with the participation of its management, including its Chief Executive Officer and its Chief Financial Officer, of the effectiveness of the design and operation of its disclosure controls and procedures (as defined in Rule 13a-15(e) of the Exchange Act). Based upon this evaluation, the Company’s management, including its Chief Executive Officer and its Chief Financial Officer, concluded that the Company’s disclosure controls and procedures were (i) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act was accumulated and communicated to the Company’s management, including its Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure, and (ii) effective to ensure that information required to be disclosed in the Company’s reports filed or submitted under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms.
There were no changes in internal control over financial reporting (as such term is defined in Exchange Act Rule 13a-15(f)) that occurred in the last fiscal quarter that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

24


Part II — Other Information
Item 1.
Legal Proceedings
From time to time, the Company is involved in litigation incidental to the conduct of its business. The Company is presently not involved in any legal proceedings which in the opinion of management are likely to have a material adverse effect on the Company's consolidated financial position or results of operations.

Item 1A.
Risk Factors
There have been no material changes in Core Molding Technologies’ risk factors from those previously disclosed in Core Molding Technologies' 2015 Annual Report on Form 10-K.

Item 2.
Unregistered Sales of Equity Securities and Use of Proceeds

None.
 
Item 3.
Defaults Upon Senior Securities
None.

Item 4.
Mine Safety Disclosures
None.

Item 5.
Other Information

None.

Item 6.     Exhibits

See Index to Exhibits.



25


SIGNATURES
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.
 
 
CORE MOLDINGS TECHNOLOGIES, INC.
Date:
November 4, 2016
By:
/s/ Kevin L. Barnett  
 
 
 
 
Kevin L. Barnett 
 
 
 
 
President, Chief Executive Officer, and Director 
 
 
 
 
 
 
 
 
 
 
Date:
November 4, 2016
By:
/s/ John P. Zimmer
 
 
 
 
John P. Zimmer
 
 
 
 
Vice President, Secretary, Treasurer and Chief Financial Officer
 
 
 
 
 



26


INDEX TO EXHIBIT
Exhibit No.
 
Description
 
Location
 
 
 
 
 
2(a)(1)
 
Asset Purchase Agreement Dated as of September 12, 1996, As amended October 31, 1996, between Navistar and RYMAC Mortgage Investment Corporation1
 
Incorporated by reference to Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809)
 
 
 
 
 
2(a)(2)
 
Second Amendment to Asset Purchase Agreement dated December 16, 19961
 
Incorporated by reference to Exhibit 2(a)(2) to Annual Report on Form 10-K for the year-ended December 31, 2001
 
 
 
 
 
2(b)(1)
 
Agreement and Plan of Merger dated as of November 1, 1996, between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
 
Incorporated by reference to Exhibit 2-B to Registration Statement on Form S-4 (Registration No. 333-15809)
 
 
 
 
 
2(b)(2)
 
First Amendment to Agreement and Plan of Merger dated as of December 27, 1996 Between Core Molding Technologies, Inc. and RYMAC Mortgage Investment Corporation
 
Incorporated by reference to Exhibit 2(b)(2) to Annual Report on Form 10-K for the year ended December 31, 2002
 
 
 
 
 
2(c)
 
Asset Purchase Agreement dated as of October 10, 2001, between Core Molding Technologies, Inc. and Airshield Corporation
 
Incorporated by reference to Exhibit 1 to Current Report on Form 8-K filed October 31, 2001
 
 
 
 
 
2(d)
 
Asset Purchase Agreement dated as of March 20, 2015, between Core Molding Technologies, Inc and CPI Binani, Inc.
 
Incorporated by reference to Exhibit 2.1 to Current Report on Form 8-K filed March 23, 2015
 
 
 
 
 
3(a)(1)
 
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
 
Incorporated by reference to Exhibit 4(a) to Registration Statement on Form S-8 (Registration No. 333-29203)
 
 
 
 
 
3(a)(2)
 
Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996
 
Incorporated by reference to Exhibit 4(b) to Registration Statement on Form S-8 (Registration No. 333-29203)
 
 
 
 
 
3(a)(3)
 
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
 
Incorporated by reference to Exhibit 3(a)(4) to Quarterly Report on Form 10-Q for the quarter ended September 30, 2002
 
 
 
 
 
3(a)(4)
 
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
 
Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed July 19, 2007
 
 
 
 
 
3(a)(5)
 
Certificate of Elimination of Series A Junior Participating Preferred Stock, as filed with the Secretary of State of the State of Delaware on April 2, 2015.
 
Incorporated by reference to Exhibit 3(a)(5) to Current Report on Form 8-K filed April 2, 2015
 
 
 
 
 
3(b)
 
Amended and Restated By-Laws of Core Molding Technologies, Inc.
 
Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed January 4, 2008
 
 
 
 
 
3(b)(1)
 
Amendment No. 1 to the Amended and Restated By-Laws of Core Molding Technologies, Inc.
 
Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed December 17, 2013
 
 
 
 
 
4(a)(1)
 
Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on October 8, 1996
 
Incorporated by reference to Exhibit 4(a) to Registration Statement on Form S-8 (Registration No. 333-29203)
 
 
 
 
 
4(a)(2)
 
Certificate of Amendment of Certificate of Incorporation of Core Molding Technologies, Inc. as filed with the Secretary of State of Delaware on November 6, 1996
 
Incorporated by reference to Exhibit 4(b) to Registration Statement on Form S-8 (Registration No. 333-29203)
 
 
 
 
 
4(a)(3)
 
Certificate of Amendment of Certificate of Incorporation as filed with the Secretary of State of Delaware on August 28, 2002
 
Incorporated by reference to Exhibit 3(a)(4) to Quarterly Report on Form 10-Q for the quarter ended September 30, 2002
 
 
 
 
 

27


Exhibit No.
 
Description
 
Location
4(a)(4)
 
Certificate of Designation, Preferences and Rights of Series A Junior Participating Preferred Stock as filed with the Secretary of State of Delaware on July 18, 2007
 
Incorporated by reference to Exhibit 3.1 to Current Report on Form 8-K filed July 19, 2007
 
 
 
 
 
4(b)
 
Stockholder Rights Agreement dated as of July 18, 2007, between Core Molding Technologies, Inc. and American Stock Transfer & Trust Company
 
Incorporated by reference to Exhibit 4.1 to Current Report on Form 8-K filed July 19, 2007
 
 
 
 
 
4(b)(1)
 
Amendment No. 1 to Stockholder Rights Agreement, dated as of April 1, 2015, between Core Molding Technologies, Inc. and American Stock Transfer & Trust Company, LLC.

 
Incorporated by reference to Exhibit 4(b)(1) to Current Report on Form 8-K filed April 2, 2015
 
 
 
 
 
10(a)
 
Severance Agreement and Release in Full, dated August 24, 2016, between William Ringling an Core Molding Technologies, Inc.
 
Incorporated by reference to Exhibit 10.1 to Current Report on Form 8-K filed August 30, 2016
 
 
 
 
 
11
 
Computation of Net Income per Share
 
Exhibit 11 omitted because the required information is Included in Notes to Financial Statement
 
 
 
 
 
31(a)
 
Section 302 Certification by Kevin L. Barnett, President, Chief Executive Officer, and Director
 
Filed Herein
 
 
 
 
 
31(b)
 
Section 302 Certification by John P. Zimmer, Vice President, Secretary, Treasurer, and Chief Financial Officer
 
Filed Herein
 
 
 
 
 
32(a)
 
Certification of Kevin L. Barnett, Chief Executive Officer of Core Molding Technologies, Inc., dated November 4, 2016, pursuant to 18 U.S.C. Section 1350
 
Filed Herein
 
 
 
 
 
32(b)
 
Certification of John P. Zimmer, Chief Financial Officer of Core Molding Technologies, Inc., dated November 4, 2016, pursuant to 18 U.S.C. Section 1350
 
Filed Herein
 
 
 
 
 
101.INS
 
XBRL Instance Document
 
Filed Herein
 
 
 
 
 
101.SCH
 
XBRL Taxonomy Extension Schema Document
 
Filed Herein
 
 
 
 
 
101.CAL
 
XBRL Taxonomy Extension Calculation Linkbase
 
Filed Herein
 
 
 
 
 
101.LAB
 
XBRL Taxonomy Extension Label Linkbase
 
Filed Herein
 
 
 
 
 
101.PRE
 
XBRL Taxonomy Extension Presentation Linkbase
 
Filed Herein
 
 
 
 
 
101.DEF
 
XBRL Taxonomy Extension Definition Linkbase
 
Filed Herein

1.
The Asset Purchase Agreement, as filed with the Securities and Exchange Commission as Exhibit 2-A to Registration Statement on Form S-4 (Registration No. 333-15809), omits the exhibits (including the Buyer Note, Special Warranty Deed, Supply Agreement, Registration Rights Agreement and Transition Services Agreement identified in the Asset Purchase Agreement) and schedules (including those identified in Sections 1, 3, 4, 5, 6, 8 and 30 of the Asset Purchase Agreement). Core Molding Technologies, Inc. will provide any omitted exhibit or schedule to the Securities and Exchange Commission upon request.




28