Attached files

file filename
EX-21 - EXHIBIT 21 - Accelerate Diagnostics, Incaccelerate-12312015xexh21.htm
EX-31.1 - EXHIBIT 31.1 - Accelerate Diagnostics, Incaccelerate-12312015xexh311.htm
EX-32 - EXHIBIT 32 - Accelerate Diagnostics, Incaccelerate-12312015xexh32.htm
EX-23.1 - EXHIBIT 23.1 - Accelerate Diagnostics, Incaccelerate-12312015xexh231.htm
EX-31.2 - EXHIBIT 31.2 - Accelerate Diagnostics, Incaccelerate-12312015xexh312.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K

þ ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2015

o TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number: 001-31822
ACCELERATE DIAGNOSTICS, INC.
(Exact name of registrant as specified in its charter)
Delaware
84-1072256
(State or other jurisdiction
(I.R.S. Employer Identification No.)
of incorporation or organization)
 
 
 
3950 South Country Club, Suite 470
 
Tucson, Arizona
85714
(Address of principal executive offices)
(Zip Code)
Registrant’s telephone number, including area code:
(520) 365-3100

Securities registered pursuant to Section 12(b) of the Act:
Title of each class
Name of each exchange on which registered
Common Stock, $0.001 par value per share
The NASDAQ Stock Market LLC
(NASDAQ Capital Market)
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. o Yes  þ  No

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. o Yes  þ  No

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.   þ  Yes o  No
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). þ  Yes  o  No

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
 
o
Accelerated filer
 
þ
Non-accelerated file
 
☐ (Do not check if a smaller reporting company)
Smaller reporting company
 
o




 Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). o  Yes  þ  No

The aggregate market value of the shares of the registrant’s common stock held by non-affiliates on June 30, 2015, the last day of the registrant’s most recently completed second fiscal quarter, was approximately $483.4 million based on the closing price quoted on the NASDAQ Stock Market.

There were 51,199,017 shares of common stock of the registrant outstanding as of March 8, 2016.

DOCUMENTS INCORPORATED BY REFERENCE

Portions of the definitive proxy statement relating to the registrant’s 2016 Annual Meeting of Stockholders are incorporated by reference in Part III of this Form 10-K.


2



TABLE OF CONTENTS 
 
 
 
 


3



Introductory Note

Except as otherwise indicated by the context, references in this Annual Report on Form 10K (this "Form 10K") to the "Company," "Accelerate," "we," "us," or "our" are references to the combined business of Accelerate Diagnostics, Inc.

Forward-Looking Statements

This Annual Report on Form 10-K contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended (the “Securities Act”) and Section 21E of the Securities Exchange Act of 1934, as amended (the “Exchange Act”), and the Company, intends that such forward-looking statements be subject to the safe harbors created thereby. These forward-looking statements, which can be identified by the use of words such as “may,” “will,” “expect,” “anticipate,” “estimate,” or “continue,” or variations thereon or comparable terminology, include the plans and objectives of management for future operations, including plans and objectives relating to the products and future economic performance of the Company. In addition, all statements other than statements of historical facts that address activities, events, or developments the Company expects, believes, or anticipates will or may occur in the future, and other such matters, are forward-looking statements.

The forward-looking statements included herein are based on current expectations that involve a number of risks and uncertainties. These forward-looking statements are based on assumptions that the Company will retain key management personnel, the Company will be successful in the development of the Accelerate ID/AST system, the Company will obtain sufficient capital to complete the development and required clinical trials of the Accelerate ID/AST system, the Company will be able to protect its intellectual property, the Company’s ability to respond to technological change, that the Company will accurately anticipate market demand for the Company’s products and that there will be no material adverse change in the Company’s operations or business. Assumptions relating to the foregoing involve judgments with respect to, among other things, future economic, competitive and market conditions and future business decisions, all of which are difficult or impossible to predict accurately and many of which are beyond the control of the Company. Although the Company believes that the assumptions underlying the forward-looking statements are reasonable, any of the assumptions could prove inaccurate and, therefore, there can be no assurance that the results contemplated in forward-looking statements will be realized. We undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

The following discussion should be read in conjunction with the Company’s audited financial statements and related notes included elsewhere herein. The Company’s future operating results may be affected by various trends and factors which are beyond the Company's control. These include, among other factors, general public perception of issues and solutions, and other uncertain business conditions that may affect the Company’s business. The Company cautions the reader that a number of important factors discussed herein, and in other reports, filed with the Securities and Exchange Commission including but not limited to the risks in the section entitled “Risk Factors” in this Form 10-K, could affect the Company’s actual results and cause actual results to differ materially from those discussed in forward-looking statements.

Industry and other data

We obtained the industry, statistical and market data from our own internal estimates and research as well as from industry and general publications and research, surveys and studies conducted by third parties. Industry publications, studies and surveys generally state that they have been obtained from sources believed to be reliable, although they do not guarantee the accuracy or completeness of such information. While we believe that each of these studies and publications is reliable, we have not independently verified statistical, market and industry data from third-party sources. While we believe our internal company research is reliable and the market definitions are appropriate, neither such research nor these definitions have been verified by any independent source.


4



PART I


Item 1. Business

Overview

Accelerate Diagnostics, Inc. is an in vitro diagnostics company dedicated to providing solutions that improve patient outcomes and lower healthcare costs through the rapid diagnosis of serious infections. Microbiology laboratories are in need of new tools to address what the U.S. Centers for Disease Control and Prevention calls one of the most serious healthcare threats of our time, antibiotic resistance. A significant contributing factor to the rise of resistance is the overuse and misuse of antibiotics, which is exacerbated by a lack of timely diagnostic results. The delay of these results is often due to the reliance by microbiology laboratories on traditional culture-based tests that often take two to three days to complete. Our technology platform is built to address these challenges by delivering significantly faster and accurate testing of infectious pathogens in various patient sample types.

Since 2004, we have focused our efforts on the development of an innovative rapid diagnostic platform, the Accelerate ID/AST System™, which we refer to as the ID/AST System or Accelerate ID/AST System, intended for the rapid diagnosis of infectious pathogens. Our goal is to reduce the failure rate of initial antibiotic drug therapy by shortening lab turnaround time to hours rather than the two to three days now required to deliver identification and susceptibility results.

The ID/AST System utilizes genotypic technology to identify, or ID, infectious pathogens and phenotypic technology to conduct antibiotic susceptibility testing, or AST, which determines whether live bacterial or fungal cells are resistant or susceptible to a particular antibiotic. The ID/AST blood culture assay kit, which we refer to as the Blood Culture Assay Kit, is being investigated for its ability to provide ID and AST results for patients suspected of bacteremia or fungemia, both life-threatening conditions with high morbidity and mortality risk. The Blood Culture Assay Kit consists of a highly multiplexed panel of more than 150 individual assays which have the potential to support clinicians in prescribing optimal antibiotic therapy for patients in this critical condition. The final number of assays included in the Blood Culture Assay Kit will depend on the results of our clinical trial to support marketing authorization from the FDA and FDA review of each individual assay for marketing clearance. This panel is designed to cover over 80% of the routine and significant pathogens causing blood stream infections and over 90% of the antibiotics useful in treating those pathogens. On June 30, 2015, we declared our conformity to the European In Vitro Diagnostic Directive 98/79 EC and applied a CE Mark to the Accelerate ID/AST System and the Blood Culture Assay Kit for in vitro diagnostic use.

We anticipate commercializing the Accelerate ID/AST System in the United States, subject to the successful completion of the U.S. registration trial and submission to and clearance by the U.S. Food and Drug Administration (“FDA”) of our de novo 510(k) for the ID/AST System, which could occur as early as the third quarter of 2016, see Risk Factors for FDA review time line risk. See “Products” below for a description of the results from our recent multicenter pilot study and more information regarding our upcoming trial to support marketing authorization from the FDA.

History

We were incorporated in 1982 in Colorado under the name Sage Resources Corp., and through a series of subsequent transactions, we became Accelerate Diagnostics, Inc., a Delaware corporation, in December 2012.

From 2001 to 2012, we focused primarily upon furthering the research and development of the OpTest portfolio of technologies (“OpTest”) that we acquired from DDx, Inc. in 2001 and the development of revenue producing products related to that technology. The purchase of OpTest provided us with a proprietary surface chemistry formulation, which led to our OptiChem® and other surface chemistry products, and quantitative bio-analytical measurement instruments.
 
In 2012, our Board of Directors and management team established a new strategic direction for the Company, which was (1) to focus on the internal development, manufacture, and commercialization of the ID/AST System and (2) to discontinue efforts to develop and actively market OptiChem and our other surface chemistry products. Our Board of Directors and management team decided to pursue this new strategic direction based on the belief that we could internally develop and commercialize the ID/AST System, formerly called the BacCel System.

5



Since the adoption of the new strategic direction in 2012, we have made significant investments in research and development personnel, facilities, equipment, and consumables to support the internal development of the ID/AST System. The Company has also invested in the hiring of regulatory, manufacturing, quality, sales, and marketing personnel experienced in the manufacture and commercialization of medical devices.
  
The new strategic direction has also required the Company to raise additional capital. In March 2013, the Company obtained additional capital through the exercise of warrants issued to Abeja Ventures, LLC in the aggregate amount of $20.1 million. In August 2013, the Company completed a rights offering that raised gross proceeds of $20.0 million; in April 2014, the Company completed a rights offering that raised gross proceeds of $45.0 million; and in December 2015, the Company completed a publicly marketed offering that raised additional gross proceeds of $109.3 million.

Clinical Need

Antibiotic resistance has a significant healthcare impact, costing the U.S. healthcare system an estimated $55 billion per year. This estimate includes $20 billion in direct costs and $35 billion in indirect costs, such as lost productivity and sick days. Increasing infection rates and misuse of antibiotics results in serious treatment complications. Recent studies have shown that the number of hospital-acquired infections in the United States ranges from 214,700 to 1.4 million per year, contributing to an estimated 75,000 deaths per year. Moreover, inappropriate antibiotic use is widespread. Of the 33 million patients admitted to U.S. hospitals each year, 56% (19 million) are put on empiric antibiotic therapy, of which more than half (9 million) are on inappropriate or unnecessary antibiotics.

AST is designed to address these challenges. According to a recent company survey of 43 critical care physicians, 95% stated that AST is the most valuable lab test when selecting optimal antibiotic therapy. Studies have shown that even a modest decrease in the time it takes to deliver an AST result correlates to reduced length and cost of hospital stay per patient. One such study showed that a five hour reduction in the time to receive an AST result delivered a two-day reduction in length of stay and a reduction in patient treatment costs of $1,750 per patient. Based on our conversations with potential customers and review of internal time studies, we estimate that the Blood Culture Assay Kit will reduce the time to receive an AST result from the time a sample is taken from a patient by a total of 29 hours on average for the Blood Culture Assay Kit. Based on our analysis, we estimate that the ID/AST System is capable of delivering results in approximately 19 hours from the time a blood sample is taken from a patient, while current solutions take a total of approximately 48 hours to deliver results.

Market Opportunity

Recent reports have indicated estimated growth in the hospital-acquired disease testing market, which we believe is a subset of the microbiology market in which we operate, at a combined average growth rate of 19.3% over seven years, from $2.2 billion in 2012 to an estimated $7.5 billion by 2019. We believe this growth is driven by the entrance of new technologies coupled with higher volumes due to enhanced screening, immune-compromised patients and increasing challenges with multidrug-resistant organisms. Across North America, Europe and Asia Pacific geographies, we estimate there are 14.1 million high-acuity tests completed annually across various sample types including blood, respiratory, skin and soft tissue, and urine. We estimate there are 5 million high-acuity tests annually for blood culture samples globally, including over 4 million in North America, Europe and various countries in the Asia Pacific region. Based on this estimated test volume, and an estimated current market price per test of approximately $180, we estimate the total available market of automated microbiological testing to be approximately $2.5 billion annually in North America, Europe and various countries in the Asia Pacific region, of which approximately $725 million is attributed to high-acuity tests for blood culture samples.

In addition, based on information compiled from various competitor annual reports and other publicly available information, as well as our own estimates, we believe there are nearly 20,000 global instrument placements possible, consisting of approximately 10,000 bioMerieux Vitek 2 installations, 6,000 Danaher Microscan installations and 4,000 instruments from other companies. Based on this estimated total instrument placement volume, and an estimated average price of an instrument sold for use in the microbiology lab today of approximately $100,000, we estimate the total available global instrument market for the ID/AST System to be approximately $2.0 billion.

Certain recent government initiatives are complementary to the ID/AST System. Centers for Medicare and Medicaid Services (“CMS”) programs to decrease hospital-acquired infections directly impact hospital budgets via reimbursement cuts, incentivizing providers to enhance infection-management protocols. These programs include the Medicare Hospital-Acquired Condition Reduction Program and the Hospital Readmissions Reduction Program.

6



Similarly, on March 27, 2015, the White House released the National Action Plan for Combating Antibiotic-Resistant Bacteria, which directly and indirectly promotes rapid susceptibility testing. The plan identifies several milestones to accomplish this goal, such as calling on the National Institutes of Health to fund new projects and provide prizes aimed at the development of rapid diagnostic tests that characterize antibiotic susceptibility and improve antibiotic stewardship; mandated implementation of antibiotic stewardship programs by all hospitals participating in Medicare and Medicaid, to go into effect within three years; and FDA and CMS’s evaluation of new regulatory pathways to promote development and adoption of innovative infectious disease diagnostics.

Products

The Accelerate ID/AST System is the Company’s first in vitro diagnostic system and is intended for the identification and antibiotic susceptibility testing of pathogens most commonly associated with serious infections, including Gram-positive and Gram-negative organisms such as Staphylococcus organisms as well as yeasts. The Accelerate ID/AST System uses long-accepted bacteriological testing principles, but applies the Company’s proprietary technology to adapt them to analyze live patient bacteria. The Accelerate ID/AST System uses automated digital microscopy to simultaneously detect and identify multiple pathogens directly from a single patient sample and then, following such identification, perform susceptibility tests based on the identification results. This technology eliminates the need for time-consuming traditional bacterial culturing, thus eliminating the major source of delay with current testing methods. The identification result is provided in approximately seventy to ninety-five minutes of presenting the patient sample to the system, and the susceptibility result is provided approximately three to six hours after the presentation of the identification result. In the case of our first test kit for positive blood culture samples a blood culture screening step is required which takes on average twelve hours to complete before the sample is introduced to the ID/AST System. This combined turnaround time is a significant improvement over the days currently required to obtain these results using conventional testing methods.

The ID/AST System features walk-away automation and consists of a fixed instrument and proprietary single-use test kit. The instrument consists of module(s) connected to a single analysis computer, which allows hospitals to acquire various numbers of modules to address their particular test volume. In order to run a patient sample on the Accelerate ID/AST System the technician would pipette the patient sample into our system, insert the test kit, and initiate the run. In the case of our initial test a positive blood culture sample is introduced to the system through pipetting directly from the blood culture bottle into our test kit.

The Accelerate ID/AST System is the result of over a decade of technology development and several years of instrument design/engineering. Initially prototype systems featured off-the-shelf pipetting robots, high-speed cameras, microscopes/illumination, and computers. The now final instrument is comprised of custom-engineered functional components, including a pipette robot for fluidic manipulation, an optical system with both dark-field and fluorescent illumination, and an imaging system. These components, among others, are used in the four processes that follow, each of which is a crucial component in delivering the rapid ID and AST results.

These processes include:

Automated specimen preparation. The initial step in the process is the automated purification of samples through an on-board and proprietary process to separate live organisms from sample debris.

Live-cell immobilization. Following preparation, the purified sample is moved to the imaging cassette where pathogens are immobilized onto the cassette surface such that they can be imaged and analyzed in a stationary position during the identification and antibiotic susceptibility testing.

Identification testing via fluorescent in situ hybridization (FISH). The now immobilized cells are tested with our proprietary FISH probes to enable identification. Because the genetic sequences of bacteria are distinctive, the binding of fluorescently labeled probes indicates the presence of a specific target sequence of RNA associated with a single or group of bacterial species or yeasts. When the probe finds a targeted sequence, it binds to it—generating a fluorescent signal—which is visible by the imaging system on the ID/AST System. Positive fluorescent signals from more than one target probe indicate polymicrobial samples and a universal bacterial stain discriminates target from non-target bacteria/fungi. The identification result is presented on the ID/AST System’s graphic user interface in approximately seventy to ninety-five minutes from the introduction of the sample into the ID/AST System.

Susceptibility testing via live-cell optical analysis. With the identification of the pathogen known, the

7



system’s software determines the antibiotic panel to be used for susceptibility testing. These antibiotics, growth media, and additional patient sample are introduced to additional channels on the optical cassette. Finally, our proprietary imaging platform and algorithms determine the minimum inhibitory concentration (MIC) of the bacteria through the observation of which antibiotics arrested live cell growth and lead to cell death and which antibiotics were ineffective in ceasing live cell growth. The susceptibility test result is presented approximately three to six hours after the conclusion of the identification test.

The Accelerate ID/AST System in its various iterations has been the subject of over 35 papers and scientific posters. Further, our internal laboratories have conducted thousands of tests on the various prototype systems and the final instrument. Published study abstracts and links to full papers are available on our website at http://acceleratediagnostics.com/our-science/publications/.

On December 2, 2015, we announced positive findings from a multicenter pilot study to evaluate external performance of our ID/AST System and Blood Culture Assay Kit. Based on the results of the pilot study, we also announced the initiation of a larger trial intended to support 510(k) clearance by the FDA.

The pilot study included ten external sites and the analysis of 146 fresh de-identified positive blood culture samples from patients and 127 samples seeded with challenging bacterial or fungal isolates. Enrollment for the pilot study followed a protocol similar to our larger upcoming trial to support marketing authorization from the FDA, which is planned to expand to 11 external clinical sites. Our upcoming trial is expected to consist of approximately 2,800 samples (600 fresh patient blood samples and 2,200 seeded samples). The FDA has established a threshold for the ID component of the Blood Culture Assay Kit of 95% or greater sensitivity and specificity. For the AST component, we are seeking to match the predicate method’s categorical and essential agreement at a rate of 89.9%. Contingent upon successful completion of the larger trial, we plan to submit a 510(k) notification seeking premarket clearance for the Accelerate ID/AST System and Blood Culture Assay Kit.

The Company will be seeking a single initial FDA submission for the integrated Accelerate ID/AST System and positive blood culture test kit and will seek additional FDA submissions should they be required to remove restrictions following the initial submission. This approach is similar to that taken by molecular diagnostic companies since early 2013 for their multiplexed identification tests.

Research and development

The Company plans to continue making significant investments in the research and development of new applications for existing technologies and in the research and development of new complementary technologies.

With the development of the Accelerate ID/AST System and positive blood culture test kit substantially complete, the Company will focus on the development of additional test kits to address opportunities in sample types including but not limited to respiratory, skin and soft tissue, and urine. Similar to the positive blood culture kit, the objective is to develop test kits which work seamlessly on the Accelerate ID/AST System and deliver substantial benefits to the microbiology laboratory and to physicians in the treatment of serious infections. Proof of concept research has already been completed on some of these sample types aided in part by DMRDP grant which aims to apply the Accelerate ID/AST System to respiratory and skin and soft tissue samples.

We anticipate seeking separate regulatory approval for each additional test kit. If and when we determine that we will pursue regulatory approvals for those applications, we would likely include the identification of the most prevalent infectious pathogens found in each specimen type and the applicable antimicrobial agents for treatment.

Our research activity is also focused on shortening the time required to distinguish between positive and negative whole blood and potentially urine samples prior to using the ID/AST System.

The Company's research and development expense for years ended December 31, 2015, 2014 and 2013 is included in the consolidated statement of operations and comprehensive loss.

Intellectual Property

We rely on a combination of patent, copyright, trademark and trade secret laws, employee and third-party non-disclosure agreements, license agreements, and other intellectual property protection methods to protect our proprietary rights. We intend to continue developing intellectual property, and we intend to aggressively protect our

8



position in key technologies. Our patented technology covers key components of the ID/AST System and is, thus, very important to the Company.  Our patents are focused on several key technologies, including our automated process for sample preparation, automated immobilization process, and methods for imaging and analysis of individual pathogen cells. The Company’s first patent on the ID/AST System technology, U.S. Patent No. 7,341,841 titled "Rapid Microbial Detection and Antimicrobial Susceptibility Testing" was issued on March 11, 2008. The patent specification covers methods used to derive identification and antibiotic susceptibility from tests on individual immobilized bacterial cells. As of December 31, 2015, we had 19 issued patents worldwide, including 12 patents issued in the United States and seven issued outside the United States.  One of our patents expires in 2017, and the remaining 18 will expire on various dates in 2022 through 2033.  Additionally, as of December 31, 2015, we had 21 patent applications pending worldwide, including 15 U.S. applications and six applications outside the United States. The Company believes that its patent suite would make it difficult for any other company to conduct rapid antibiotic susceptibility testing of individual pathogens.

Sales, Marketing, and Distribution

The target customer for our products is hospital microbiology laboratories that perform identification and antibiotic susceptibility testing.  Globally, the vast majority of hospitals with an intensive care unit have such a laboratory. In general, we plan to build our own sales force to market the ID/AST System directly to our targeted customers.  However, in select geographies, we plan to use third-party distributors to market the product.

Our commercial strategy is to focus initially on high volume and influential accounts in key geographies with a direct sales force in North America and in select European countries. Early marketing efforts include the planned initiation of market studies at multiple sites across the United States and European Union. In support of these efforts, we anticipate establishing a sales force based in the European Union and the United States.

Competition

To the best of our knowledge, no other company has a single product with capabilities matching those of the ID/AST System. The leading companies with automated microbiological testing products include Becton, Dickinson and Company (“BD”), bioMerieux, Danaher Corporation (“Danaher”), Bruker Corporation, Nanosphere, T2 Biosystems, Abbott and Thermo Fisher Scientific’s subsidiary TREK Diagnostics Systems, Inc. (“TREK”). These companies provide products for the broad-based culturing and analysis of a wide variety of bacteria. However, only BD, bioMerieux, Danaher and TREK market products that perform AST, and we believe that none of our competitor’s products are able to provide AST results as quickly as the ID/AST System.

Our competitors’ AST products require purified bacterial strains or “isolates” for analysis, which require at least overnight culturing of a sample to produce enough organisms to test. We believe these standard culturing methods, including enrichment growth and colony isolation, cannot achieve the speed that the ID/AST System is expected to provide.

Industry Developments

The clinical microbiology industry is subject to rapid technological changes, and new products are frequently introduced for rapid bacterial identification using genes or other molecular markers (“molecular diagnostics”). Numerous acquisitions, licenses, and distribution arrangements have been announced over the last few years for such products. However, we do not believe that any of these technologies offers the advantages offered by the ID/AST System. For example, gene detection can be highly sensitive and specific for the identification of pathogens, but very few antibiotic resistance mechanisms are simple enough to allow accurate guidance for drug selection. Even in those rare instances that have a direct relationship between a gene and effective resistance, such as particular Methicillin-Resistant Staphylococcus Aureus (MRSA) strains, leading literature has reported novel mutations that escape detection by recently commercialized tests.

Fundamental biological limitations arise from the complexity of the majority of drug resistance expression mechanisms. This complexity precludes direct interpretation of molecular marker presence or absence and extrapolating to prescription guidance. Many new diagnostic technologies also require prior isolation of cultured colonies in order to assure accuracy. The time required to obtain such isolates, with a minimum of overnight turnaround, prevents these technologies from serving as rapid diagnostics for treatment decision support.

Another new technology receiving wide attention is mass spectrometry, and particularly the matrix-assisted

9



laser desorption ionization time of flight version (“MALDI-TOF”), such as the Biotyper® system from Bruker Corporation, which has not yet received FDA clearance. Bruker Corporation has agreements with a number of companies for distribution, including BD, TREK, and Siemens. bioMerieux has a similar system for distribution with Shimadzu Corporation. These systems build an empiric database from protein spectra acquired from many thousands of purified bacterial and fungal strains. They require a pure strain isolate for analysis and enrichment culturing to produce enough material to analyze. Some research papers on these systems report attempts to directly analyze isolate or blood culture smears, but results are not as reliable as those from samples prepared using a cleanup process to produce crude protein extracts.

MALDI-TOF systems have a major advantage over other molecular methods in identifying a very broad range of organisms. Cost of ownership is also substantially below that of older molecular methods. But the requirement for extensive organism enrichment and purification, as well as the inability to quantify live organisms or distinguish samples derived from viable organisms, substantially limits this technology from time-critical decision support. In this respect, the ID/AST System provides a substantial advantage for more rapid test results. Finally, as with the older molecular methods, MALDI-TOF systems cannot identify major drug resistance expression and faces the same fundamental biological barriers as gene detection.

Government Regulation

Our products under development and our operations are subject to significant government regulation. In the United States, our products are regulated as medical devices by the FDA and other federal, state, and local regulatory authorities.

FDA Regulation of Medical Devices

The FDA and other U.S. and foreign governmental agencies regulate, with respect to medical devices:

design, development, manufacturing, and storage;

testing, content, and language of instructions for use and storage;

labeling;

pre-clinical testing and clinical trials;

product safety;

advertising, promotion, marketing, sales, and distribution;

pre-market clearance and approval;

record-keeping procedures;

advertising and promotion;

recalls and corrective field actions;

post-market reporting, including reporting of deaths, serious injuries, and malfunctions that, if they were to recur, could lead to death or serious injury;

post-market studies and surveillance; and

product import and export.

In the United States, numerous laws and regulations govern all the processes by which medical devices are brought to market and marketed. These include the Federal Food, Drug and Cosmetic Act (the “FDCA”) and the FDA's implementing regulations.

FDA Pre-market Clearance and Approval Requirements

10




Each medical device we seek to commercially distribute in the United States must first receive 510(k) clearance, approval of a reclassification petition or de novo classification request, or pre-market approval from the FDA, unless specifically exempted by the FDA. The FDA classifies all medical devices into one of three classes. Devices deemed to pose the lowest risk are categorized as either Class I or II, which generally requires the manufacturer to submit to the FDA a 510(k) pre-market notification submission requesting clearance of the device for commercial distribution in the United States. Some low risk devices are exempted from this requirement. Devices deemed by the FDA to pose the greatest risk, such as life sustaining, life-supporting, or implantable devices, or devices deemed not substantially equivalent to a previously 510(k)-cleared device are categorized as Class III. These devices generally require submission and approval of a pre-market approval application, or PMA.

510(k) Clearance Process

To obtain 510(k) clearance, we must submit a pre-market notification to the FDA demonstrating that the proposed device is substantially equivalent to a device that has previously obtained 510(k) clearance, a device that has been classified into Class I or II, or a device that was legally marketed before May 28, 1976 and that is not yet subject to an FDA order requiring pre-market approval. In rare cases, Class III devices may be cleared through the 510(k) process. The FDA has committed to review most 510(k) decisions within 90 days, but the review clock may be stopped due to requests for additional information. A decision may take significantly longer, and clearance is never assured. Although many 510(k) pre-market notifications are cleared without clinical data, in some cases, the FDA requires significant clinical data to support substantial equivalence. In reviewing a pre-market notification submission, the FDA may request additional information, including clinical data, which may significantly prolong the review process.

After a device receives 510(k) clearance, any subsequent modification of the device that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, requires a new 510(k) clearance or, in some cases, approval of a PMA. The FDA requires each manufacturer to make this determination initially, but the FDA may review any such decision and may disagree with a manufacturer's determination. If the FDA disagrees with a manufacturer's determination, the FDA may require the manufacturer to cease marketing and/or recall the modified device until 510(k) clearance or approval of a PMA is obtained. Under these circumstances, the FDA may also subject a manufacturer to enforcement action and sanctions, including those described below. In addition, the FDA is currently evaluating the 510(k) process and may make substantial changes to regulatory requirements, including changes that could affect which devices are eligible for 510(k) clearance, the FDA’s ability to rescind 510(k) clearances, and additional requirements that may significantly impact the 510(k) review process.

 Pre-market Approval Process

A PMA generally must be submitted if the medical device is in Class III or cannot be cleared through the 510(k) process. A PMA must be supported by extensive technical, preclinical, clinical, manufacturing, and labeling data to demonstrate to the FDA's satisfaction the safety and effectiveness of the device.

After a PMA is submitted and filed, the FDA begins an in-depth review of the submitted information. During this review, the FDA may request additional information or clarification of information already provided. Also during the review period, an advisory panel of experts from outside the FDA may be convened to review and evaluate the application and provide recommendations to the FDA as to the approvability of the device. In addition, the FDA will conduct a pre-approval inspection of the manufacturing facility to ensure compliance with Quality System Regulation (“QSR”), which imposes elaborate development, testing, control, documentation and other quality assurance requirements on the design and manufacturing process. The FDA has committed to review most PMAs within 180 days where an advisory panel is not required and within 320 days where an advisory panel is required, but the review clock may be stopped due to requests for additional information. A decision may take significantly longer, and approval is never assured. The FDA may approve a PMA with post-approval conditions intended to ensure the safety and effectiveness of the device including restrictions on labeling, promotion, sale, and distribution and collection of safety data. Failure to comply with the conditions of approval can result in enforcement action and sanctions, including those described below. New PMAs or PMA supplements are required for significant modifications to the manufacturing process, labeling of the product, or design of a device that is approved through the PMA process. PMA supplements often require submission of the same type of information as an original PMA, except that the supplement is limited to information needed to support any changes from the device covered by the original PMA and may not require as extensive clinical data or the convening of an advisory panel. 

De novo Classification Process

11




Medical device types that the FDA has not previously classified as Class I, II, or III are automatically classified into Class III regardless of the level of risk they pose. The Food and Drug Administration Modernization Act of 1997 established a new route to market for low-to-moderate risk medical devices that are automatically placed into Class III due to the absence of a predicate device, called the "Request for Evaluation of Automatic Class III Designation," or the de novo classification procedure. This procedure allows a manufacturer whose novel device is automatically classified into Class III to request down-classification of its medical device into Class I or Class II on the basis that the device presents low or moderate risk, rather than requiring the submission and approval of a PMA. Prior to the enactment of the Food and Drug Administration Safety and Innovation Act (“FDASIA”) in July 2012, a medical device could only be eligible for de novo classification if the manufacturer first submitted a 510(k) pre-market notification and received a determination from the FDA that the device was not substantially equivalent. FDASIA streamlined the de novo classification pathway by permitting manufacturers to also request de novo classification directly without first submitting a 510(k) pre-market notification to the FDA and receiving a not substantially equivalent determination. Under FDASIA, the FDA is required to classify the device within 120 days following receipt of such a direct de novo request. If the manufacturer seeks classification into Class II, the manufacturer should include a draft proposal for special controls that are necessary to provide a reasonable assurance of the safety and effectiveness of the medical device. In addition, the FDA may reject a de novo request if the FDA identifies a legally marketed predicate device that would be appropriate for a 510(k), determines that the device is not low-to-moderate risk, or determines that general controls would be inadequate to control the risks and special controls cannot be developed. We plan to utilize the de novo classification process to obtain marketing authorization for the ID/AST System, which we believe will be placed within Class II.

Clinical Trials

Clinical trial data is typically required to support a PMA and is sometimes required for a 510(k) pre-market notification. Initiation of a clinical trial generally requires submission of an application for an Investigational Device Exemption (an “IDE”) to the FDA. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the investigational protocol is scientifically sound. The IDE application must be approved in advance by the FDA for a specified number of patients, unless the product is deemed a non-significant risk device and eligible for abbreviated IDE requirements. Clinical trials for a significant risk device may begin once the IDE application is approved by the FDA as well as the appropriate institutional review boards at the clinical trial sites and the informed consent of the patients participating in the clinical trial is obtained. After a trial begins, the FDA may place it on hold or terminate if it concludes that the clinical subjects are exposed to unacceptable risks. Any trials we conduct must be conducted in accordance with FDA regulations as well as other federal regulations and state laws concerning human subject protection and privacy. Moreover, the results of a clinical trial may not be sufficient to obtain clearance or approval of the product.

Clinical trial sponsors may also be subject to the Medicare Secondary Payer laws, which prohibit Medicare from making a payment if payment has been made or can reasonably be expected to be made by other plans, such as liability insurance plans (including self-insurance). Section 111 of the Medicare, Medicaid, and SCHIP Extension Act of 2007 (“MMSEA”) established mandatory reporting requirements with respect to Medicare beneficiaries who receive settlements, judgments, awards, or other payment from liability insurance (including self-insurance) plans. When payments are made by sponsors of clinical trials for complications or injuries arising out of the trials, such payments are considered to be payments by liability insurance (including self-insurance) and must be reported. Section III of the MMSEA includes authority for CMS to impose civil monetary penalties against liability insurance (including self-insurance) plans that are determined to be non-compliant with the applicable reporting requirements.

Pervasive and Continuing Regulation

After a medical device is placed on the market, numerous FDA regulatory requirements apply, including the following:

the QSR, which imposes elaborate development, testing, control, documentation, and other quality assurance requirements on the design and manufacturing process;

establishment registration, which requires establishments involved in the production and distribution of medical devices, intended for commercial distribution in the United States, to register with the FDA;

medical device listing, which requires manufacturers to list the devices they have in commercial distribution

12



with the FDA;

labeling regulations and various statutory provisions, which prohibit false or misleading labeling, as well as the promotion of products for unapproved or "off-label" uses, and impose other restrictions on labeling; and

post-market reporting requirements, which require that manufacturers report to the FDA deaths, serious injuries, and malfunctions that, if they were to recur, could lead to death or serious injury, recalls, and corrective field actions.

In certain cases, advertising is also subject to scrutiny by the Federal Trade Commission. The FDA and other agencies actively enforce these and other applicable laws and regulations. Failure to comply with applicable requirements may result in enforcement action by the FDA and/or the U.S. Department of Justice, which may include one or more of the following administrative or judicial sanctions:

untitled letters or warning letters;

fines, injunctions, and civil penalties;

mandatory recall or seizure of our products;

administrative detention or banning of our products;

operating restrictions, partial suspension, or total shutdown of production;

import holds;

refusing to approve pending 510(k) notifications or PMAs;

revocation of 510(k) clearance or pre-market approvals previously granted; and

criminal prosecution and penalties.

International Regulation

Sales of medical devices outside the United States are subject to foreign government regulations, which vary substantially from country to country. In order to market our products in other countries, we must obtain regulatory approvals and comply with extensive safety and quality regulations in other countries. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA clearance or approval, and the requirements may differ significantly.

In the European Economic Area, or EEA, which comprises the 28 Member States of the EU plus Liechtenstein, Norway and Iceland, in vitro medical devices are required to conform with the essential requirements of the EU Directive on in vitro diagnostic medical devices (Directive 98/79/EC, as amended). To demonstrate compliance with the essential requirements, the manufacturer must undergo a conformity assessment procedure. The conformity assessment varies according to the type of medical device and its classification. For low-risk devices, the conformity assessment can be carried out internally, but for higher risk devices (self-test devices and those included in List A and B of Annex II of Directive 98/79/EC) it requires the intervention of an accredited EEA Notified Body. If successful, the conformity assessment concludes with the drawing up by the manufacturer of an EC Declaration of Conformity entitling the manufacturer to affix the CE mark to its products and to sell them throughout the EEA. The EC Declaration of Conformity was received by the Company in 2015.

Other Healthcare Laws

Upon commercialization of the ID/AST System, our business activities, including the activities of any third-party distributors that we retain, will likely be subject to additional healthcare laws and regulations and related enforcement by the federal government as well as the governments of states and foreign jurisdictions where we conduct our business. These laws and regulations include, without limitation, state and federal anti-kickback, fraud and abuse, false claims, privacy and security, and physician payment transparency laws and regulations. Violations of these laws

13



or regulations can result in criminal or civil sanctions, including substantial fines and, in some cases, exclusion from participation in federal healthcare programs, such as Medicare and Medicaid. The following discussion describes certain federal and state healthcare laws and regulations that may impact our operations and the operations of our customers, but is not intended to be an exhaustive discussion of all potentially applicable federal and state health laws and regulations.

The federal Anti-Kickback Statute prohibits any person from knowingly and willfully offering, soliciting, receiving, or providing remuneration, directly or indirectly, overtly or covertly, in cash or in kind, in exchange for or to induce either the referral of an individual for an item or service, or the purchasing, leasing, ordering, or arranging for or recommending the purchase, lease, or order of any good, facility, item, or service for which payment may be made, in whole or in part, under a federal healthcare program, such as the Medicare and Medicaid programs. A person need not have actual knowledge of the Anti-Kickback Statute or specific intent in order to commit a violation, and several courts have interpreted the intent requirement of the Anti-Kickback Statute to mean that if any one purpose of an arrangement is to induce referrals or purchases of federal healthcare program business, the Anti-Kickback Statute has been violated. In addition to criminal fines and penalties set forth under the Anti-Kickback Statute, violations of the Anti-Kickback Statute can result in exclusion or debarment from participation in the federal healthcare programs, as well as substantial penalties under the Civil Monetary Penalties Statute, which imposes penalties against any person or entity that is determined to have presented or caused to be presented a claim to a federal healthcare program that the person knows or should know is for an item or service that was not provided as claimed or is false or fraudulent. A violation of the federal Anti-Kickback Statute constitutes a false or fraudulent claim for purposes of the federal False Claims Act, which, as discussed below, imposes liability on any person or entity that knowingly presents, or causes to be presented, a false or fraudulent claim for payment by a federal healthcare program. Several states also have anti-kickback laws which establish similar prohibitions and, in some cases, may apply to items or services reimbursed by any third-party payor, including commercial insurers.

The federal False Claims Act imposes liability on any person or entity that knowingly presents or causes to be presented a false or fraudulent claim for payment to, or approval by, the U.S. government. Liability under the False Claims Act can give rise to treble damages and civil penalties of up to $11,000 per claim. In addition to actions initiated by the government itself, the qui tam provisions of the False Claims Act authorize private individuals to bring False Claims Act actions on behalf of the federal government alleging that the defendant has submitted a false claim to the federal government, and to share in a percentage of the recovery. In recent years, the government and qui tam relators have initiated suits resulting in multi-million and multi-billion dollar settlements under the False Claims Act in addition to criminal convictions under applicable criminal statutes. Given the significant size of actual and potential settlements, it is expected that the government and qui tam relators will continue to devote substantial resources and use the False Claims Act to investigate and prosecute healthcare companies’ compliance with applicable fraud and abuse laws.

The federal Health Insurance Portability and Accountability Act of 1996 (“HIPAA”) created federal criminal statutes that prohibit knowingly and willfully executing, or attempting to execute, a scheme or artifice to defraud any healthcare benefit program, including private third-party payors or to obtain—by means of false or fraudulent pretenses, representations, or promises—any of the money or property owned by or under the custody or control of any healthcare benefit program; and knowingly and willfully falsifying, concealing, or covering up a material fact or making any materially false, fictitious, or fraudulent statement in connection with the delivery of or payment for healthcare benefits, items or services. The Affordable Care Act amended certain sections of the HIPAA criminal statutes such that a person need not have actual knowledge of the applicable statute or specific intent in order to have committed a healthcare fraud violation.

As stated above, many states and foreign countries have adopted similar fraud and abuse laws that may be broader in scope and may apply regardless of payor. Violations of any of these laws can lead to additional risk such as risk of plaintiff class actions, state attorney general actions, and investigation by agencies such as the Department of Justice (“DOJ”) or the Federal Trade Commission (“FTC”).

The Physician Payment Sunshine Act, implemented by Section 6002 of the Affordable Care Act, imposes transparency requirements on certain manufacturers, referred to as “applicable manufacturers,” of drugs, devices, biological, or medical supplies for which payment is available under Medicare, Medicaid, the Children’s Health Insurance Program (“CHIP”), or a waiver of a plan offered under CHIP. Applicable manufacturers must track and report to the Centers for Medicare & Medicaid Services (“CMS”) certain payments or "transfers of value" provided to U.S. licensed physicians and teaching hospitals during the preceding calendar year, as well as certain ownership and investment interests held by U.S. licensed physicians and their immediate family members. CMS releases the reported data on a public website on an annual basis. Failure to report as required under the Physician Payment Sunshine Act could

14



subject applicable manufacturers to significant financial penalties, while tracking and reporting the required payments and transfers of value may result in considerable administrative expense. Several states currently have similar laws, and more states may enact similar legislation, some of which may be broader in scope. For example, certain states require the implementation of compliance programs, compliance with industry ethics codes, implementation of gift bans, and spending limits, and/or reporting of gifts, compensation, and other remuneration to healthcare professionals.

We also may be subject to data privacy and security regulation by both the federal government and the states in which we conduct our business. HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act (“HITECH”), and their respective implementing regulations, including the final omnibus rule published by the Department of Health and Human Services Office for Civil Rights (“OCR”) in January 2013, restrict the use and disclosure of patient-identifiable health information, mandate the adoption of standards relating to the privacy and security of patient-identifiable health information, and require us to report certain security breaches to healthcare provider customers with respect to such information where we are acting as a HIPAA business associate, as that term is defined, to that customer. In addition to HIPAA criminal penalties, HITECH created four new tiers of civil and monetary penalties and gave state attorneys general new authority to file civil actions for damages or injunctions in federal courts to enforce the federal HIPAA privacy and security laws and seek attorneys' fees and costs associated with pursuing federal civil actions. In addition, state laws govern the privacy and security of health information in certain circumstances and impose reporting requirements for data breaches, many of which differ from each other and HIPAA in significant ways and may not have the same effect, thus complicating compliance efforts.

The use of certain diagnostic products by our potential customers is affected by the Clinical Laboratory Improvement Amendments (“CLIA”) and related federal and state regulations that provide for regulation of laboratory testing. CLIA is intended to ensure the quality and reliability of clinical laboratories in the United States by mandating specific standards in the areas of personnel qualifications, administration, and participation in proficiency testing, patient test management, quality assurance, quality control, and inspections. Current or future CLIA requirements or the promulgation of additional regulations affecting laboratory testing may prevent some laboratories, hospitals, providers, or other customers with laboratories from using some or all of our diagnostic products.

Healthcare Reform

In the United States and several foreign jurisdictions, there have been, and we expect there may continue to be, a number of legislative and regulatory changes to the healthcare system seeking to reduce healthcare costs that could affect our future results of operations as we begin to commercialize our products.

In the United States, the Affordable Care Act (“ACA”), enacted in March 2010, made changes that are expected to have a continued and significant impact on the medical device industry and clinical laboratories, including the way healthcare is delivered and financed by governmental and private insurers. For example, the legislation provided for reductions in the Medicare clinical laboratory fee schedule and, since 2013, has required that certain medical device manufacturers pay an excise tax in an amount equal to 2.3% of the price for which such manufacturer sells its medical devices. We will be subject to this tax once we begin selling the ID/AST System.

In addition, frequently in recent years, other legislative, regulatory, and political changes aimed at regulating healthcare delivery in general and clinical laboratories in particular have been proposed and adopted in the United States. Payment and reimbursement for the laboratory industry and hospital and other healthcare provider services have been under significant pressure. Most recently, in January 2015, the Department of Health and Human Services (“HHS”) announced a plan to shift the Medicare program and the healthcare system at large toward paying providers based on quality, rather than the quantity of care provided to patients, and the President’s budget for fiscal year 2016 proposed reductions in Medicare spending.

Reimbursement

We do not believe that hospitals will specifically seek reimbursement from the government or private insurance companies for their purchase of the ID/AST System or the positive blood culture test kits. Instead, we believe that hospitals will recoup such costs by obtaining reimbursement from the government or private insurance companies for in-bed occupancies, which traditionally includes all testing required for admitted patients.

Hospitals, clinical laboratories, and other healthcare provider customers that may purchase our products, if approved, generally bill various third-party payors to cover all or a portion of the costs and fees associated with diagnostic tests, including the cost of the purchase of our products. We currently expect that all of our diagnostic tests

15



will be performed in a hospital inpatient setting, where governmental payors, such as Medicare, generally reimburse hospitals a single bundled payment that is based on the patient’s diagnosis under a classification system known as the Medicare severity diagnosis-related groups (“MS-DRGs”) classification for all items and services provided to the patient during a single hospitalization, regardless of whether our diagnostic tests are performed during such hospitalization.

Operations

In January 2013, we relocated our headquarters from Denver, Colorado to Tucson, Arizona, where we currently lease approximately 52,497 square feet of office, manufacturing and laboratory space. Further information regarding our Tucson facility is included in Item 2. Properties included elsewhere in this report, and details regarding our lease arrangement are included in Item 8, Note 14, Commitments to the audited consolidated financial statements included elsewhere in this report.

We plan to assemble the ID/AST System instrument and consumable test kits in our facilities in Tucson, Arizona. The ID/AST System requires certain components that are custom-fabricated to our specifications. Such components include injection-molded plastic components, die-cut laminates, and machined mechanical components. We own the necessary production tooling and believe that we will be able to qualify secondary sources as needed to support future demand for the ID/AST System.

Raw Materials

We purchase many different types of raw materials, including plastics, glass, metals, electronic and mechanical sub-assemblies and various biological and chemical products. We seek to ensure continuity of raw material supply by securing multiple options for sourcing. However, our components are custom-made by only a few outside suppliers. In certain instances, we have a sole source supply for key product components of the ID/AST System. We have entered into supply agreements with most of our suppliers to help ensure component availability and flexible purchasing terms with respect to the purchase of such components.

Employees

We have 113 employees as of December 31, 2015. We have not entered into any collective bargaining agreements and consider our labor practices and employee relations to be good.

Available Information

We regularly file reports with the SEC, including Annual Reports on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K and any other filings required by the SEC. We make these reports available free of charge in the investor relations section of our corporate website (http://ir.axdx.com/) as soon as reasonably practicable after such material is electronically filed with or furnished to the SEC. References to our corporate website address in this report are intended to be inactive textual references only, and none of the information contained on our website is part of this report or incorporated in this report by reference.

The public may inspect and copy materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Room 1580, Washington, DC 20549. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. You may also access these materials, and other information regarding issuers like us that file information electronically with the SEC, from the SEC’s internet website at http://www.sec.gov/.

Item 1A. Risk Factors

Investing in our securities involves a high degree of risk. You should carefully consider the risks described below, in addition to the other information included or incorporated by reference in this Annual Report on Form 10-K, including our financial statements and the related notes. If any of the following risks materializes, our business, financial condition, results of operations or growth prospects could be materially adversely affected, and the value of an investment in our common stock may decline significantly.

Risks Related to Our Business and Strategy


16



Our future profitability and continued existence is dependent in large part upon the successful final development and commercialization of the Accelerate ID/AST System and further development and commercialization of complimentary products.

Our principal business strategy involves the successful final development and commercialization of the Accelerate ID/AST System, associated test kits and the future development and commercialization of complimentary products. On June 30, 2015, we declared our conformity to the European In Vitro Diagnostic Directive 98/79 EC and CE Mark of the Accelerate ID/AST System and ID/AST Blood Culture Assay Kit for in vitro diagnostic use. We have dedicated a significant amount of resources to finalize the development of and prepare to market and sell the ID/AST System, and we plan to continue our investment in finalizing the development and commercialization of the ID/AST System in the United States and other jurisdictions in which we intend to pursue marketing authorization. There can be no assurance that we will successfully finalize the development of and commercialize the ID/AST System, associated Blood Culture Assay Kit, or further develop and commercialize complimentary products. We may be required to expend significantly more resources than planned in this process, and as a result we may have to cease investing in the ID/AST System or developing other products.

If we are not successful in the final development and commercialization of the ID/AST System, such failure could lead to impairment of certain of our intellectual property and may result in our ceasing operations.

Further, if we are not successful in conveying to hospitals that the ID/AST System provides equivalent or superior diagnostic information in a shorter period of time compared to existing technologies, or that the ID/AST System improves patient outcomes or decreases healthcare costs, we may experience reluctance from hospitals to order our product. If we fail to successfully commercialize the ID/AST System, we may never receive a return on the significant investments in product development, sales and marketing, regulatory compliance, manufacturing and quality assurance we have made and further investments we intend to make, and may fail to generate revenue and gain economies of scale from such investments.

Our product candidates have not obtained marketing authorization from the FDA, and they may never obtain such marketing authorization or other regulatory clearance.

Our success depends on our ability to obtain marketing authorization from the FDA or regulatory clearance of the ID/AST System and other product candidates in our pipeline. If our attempts to obtain marketing authorization or other regulatory clearance are unsuccessful, we may be unable to generate sufficient revenue to sustain and grow our business. Our future product candidates may not be sufficiently sensitive or specific to obtain, or may prove to have other characteristics that preclude our obtaining, marketing authorization from the FDA or regulatory clearance. The process of obtaining regulatory clearance is expensive and time-consuming and can vary substantially based upon, among other things, the type, complexity and novelty of our product candidates. Changes in regulatory policy, changes in or the enactment of additional statutes or regulations or changes in regulatory review for each submitted product application may cause delays in the clearance of, or receipt of marketing authorization from the FDA for, a product candidate or rejection of a regulatory application altogether. The FDA has substantial discretion in the de novo review and clearance processes and may refuse to accept any application or may decide that our data are insufficient for clearance and require additional pre-clinical, clinical or other studies. In addition, varying interpretations of the data obtained from pre-clinical and clinical testing could delay, limit or prevent marketing authorization from the FDA or regulatory clearance of a product candidate. Furthermore, the FDA may not provide clearance for all of the individual assays of our Blood Culture Assay Kit. Any marketing authorization from the FDA or regulatory clearance we ultimately obtain may be limited or subject to restrictions or post-market commitments that render the product candidate not commercially viable.

If we do not achieve our projected development goals in the time frames we announce and expect, the commercialization of our products may be delayed and, as a result, our stock price may decline.

From time to time, we estimate the timing of the accomplishment of various scientific, clinical, regulatory and other product development goals. These goals may include the commencement or completion of clinical trials and the submission of regulatory filings. From time to time, we may publicly announce the expected timing of some of these goals. For example, we state that, contingent upon successful completion of the larger trial, we plan to submit a 510(k) notification seeking premarket clearance for the Accelerate ID/AST System and Blood Culture Assay Kit, and that we anticipate commercializing the Accelerate ID/AST System in the United States, subject to the successful completion of the U.S. registration trial and submission and clearance by the FDA of our de novo 510(k) for the ID/AST System and Blood Culture Assay Kit, which could occur as early as the third quarter of 2016. All of these goals

17



are, and will be, based on a variety of assumptions. The actual timing of these goals can vary significantly compared to our estimates, in some cases for reasons beyond our control. We may experience numerous unforeseen events that could delay or prevent our ability to receive marketing approval or commercialize our product candidates, including the uncertainties and risks set forth in these risk factors. If we do not meet our goals as publicly announced, the commercialization of our product candidates may be delayed and, as a result, our stock price may decline.

Although we announced positive findings from our recently completed pilot study, there is no guarantee that our larger trial to support marketing authorization from the FDA will have similar results.

On December 2, 2015, we announced positive findings from a multicenter pilot study to evaluate external performance of our ID/AST System and Blood Culture Assay Kit. Based on the results of the pilot study, we also announced the initiation of a larger trial intended to support 510(k) clearance by the FDA. There is no guarantee that the larger upcoming trial to support marketing authorization from the FDA will achieve similar results. If the larger trial does not achieve the results required to support marketing authorization from the FDA, we may be required to further develop our ID/AST System and Blood Culture Assay Kit and the commercialization of our technology would be delayed or may never be achieved, and, as a result, our stock price may decline.

We may not be able to enhance the capabilities of our current and new products to keep pace with our industry’s rapidly changing technology and customer requirements.

Our industry is characterized by rapid technological changes, frequent new product introductions and enhancements and evolving industry standards. Our future success will depend significantly on our ability to enhance our current products and develop or acquire and market new products that keep pace with technological developments and evolving industry standards as well as respond to changes in customer needs. New technologies, techniques or products could emerge that might offer better combinations of price and performance than the products and systems that we plan to sell. It is critical to our success that we anticipate changes in technology and customer requirements and physician, hospital and healthcare provider practices and successfully introduce new, enhanced and competitive technologies to meet our prospective customers’ needs on a timely and cost-effective basis. At the same time, however, we must carefully manage our introduction of new products. If potential customers believe that such products will offer enhanced features or be sold for a more attractive price, they may delay purchases until such products are available.

We are developing additional uses for the ID/AST System. Any failure or delay in launching new applications may compromise our ability to achieve our growth objectives.

We are developing additional uses for the ID/AST System, including the ability to test on additional specimen types (e.g., respiratory samples, skin and soft tissue and urine). We may have problems applying our technologies to additional specimen types, and our new applications may not be as effective in detection as our initial applications. We may also encounter difficulties obtaining regulatory approval for additional uses of the ID/AST System. Any failure or delay in launching new applications may compromise our ability to achieve our growth objectives.

There can be no assurance that we will be successful in developing or acquiring product enhancements or new products to address changing technologies and customer requirements adequately, that we can introduce such products on a timely basis or that any such products or enhancements will be successful in the marketplace. If we are unable to successfully develop or acquire new products or if the market does not accept our products, or if we experience difficulties or delays in the final development and commercialization of our products, including the ID/AST System, we may be unable to attract additional customers for our products or license our products to other strategic partners.

The failure of the ID/AST System or any future diagnostic products to perform as expected could significantly impair our reputation and the public image of our products, and we may be subject to legal claims arising from any defects or errors.

Our success will depend on the market’s confidence that our technologies can provide reliable, high-quality diagnostic results. We believe that our customers are likely to be particularly sensitive to any defects or errors in the ID/AST System. If we experience disruptions or other performance problems with the ID/AST System or any future diagnostic product, we could face warranty and liability claims against us or our reputation could suffer as a result of such failures. We cannot assure you that our product liability insurance would adequately protect our assets from the financial impact of defending a product liability claim. Any product liability claim brought against us, with or without merit, could increase our product liability insurance rates or prevent us from securing insurance coverage in the future.

18



In addition, the FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products in the event of material deficiencies or defects in design or manufacture of a product or in the event that a product poses an unacceptable risk to health. A recall, material liability claim or other occurrence that harms our reputation or decreases market acceptance of our products could cause us to incur significant costs, divert the attention of our key personnel or cause other significant customer relations problems.

We have limited revenues from our products and no assurance of future revenues.

We have received limited revenue from sales based on products using our OptiChem technology, and we are in the process of discontinuing our efforts to develop and actively market OptiChem and our other surface chemistry products. During the years ended December 31, 2015, 2014, and 2013, we experienced losses from operations. Our future revenues are dependent on the successful final development and commercialization of the ID/AST System, and there can be no assurance that we will be successful. If we are unsuccessful in generating revenues from such product, we will likely continue to experience losses from operations and negative cash flow as we have in the past.

We are a development-stage company that has incurred significant losses in recent years, and we expect to incur losses in the future. We cannot be certain that we will achieve or sustain profitability.

We have incurred significant costs in connection with the development and commercialization of our technology, and there is no assurance that we will achieve sufficient revenues to offset anticipated operating costs. We have incurred significant losses in recent years and expect to incur losses in the future. We expect that our losses will continue for at least the next several years as we will be required to invest significant additional funds toward development and commercialization of our technology. We also expect that our selling, general and administrative expenses will continue to increase due to the additional costs associated with establishing a dedicated sales force and other marketing efforts for the ID/AST System. Our ability to achieve or sustain profitability depends on numerous factors, many of which are beyond our control, including our ability to achieve marketing authorization from the FDA or regulatory clearance for the Accelerate ID/AST System, the market acceptance of our product, future product development and our market penetration and margins. If we are unsuccessful in completing the development of the ID/AST System and generating revenues from ID/AST System sales, we will likely continue to experience losses from operations and negative cash flow. Although we anticipate deriving revenues from the sale of our products, no assurance can be given that these products can be sold on a net profit basis. If we achieve profitability, we cannot give any assurance that we will be able to sustain or increase profitability on a quarterly or annual basis in the future.

We have no experience in marketing and selling the ID/AST System.

We have no experience marketing and selling the ID/AST System. In anticipation of the receipt of marketing authorization from the FDA for the ID/AST System, we have begun to build our own sales force to market the ID/AST System directly to our target customers, and we plan to continue to build this sales force. In select geographies outside of the United States and Europe, we may also use third-party distributors to market our product.

Our future sales will depend in large part on our ability to successfully establish an effective sales force. Because we have no experience in marketing and selling the ID/AST System, our ability to forecast demand, the infrastructure required to support such demand and the sales cycle of our potential customers is unproven.

Moreover, we may use third-party distribution partners for certain geographic areas outside of the United States and Europe, and there is no guarantee that we will be able to enter into such arrangements on favorable terms. Distributors may not commit the necessary resources to market and sell the ID/AST System effectively or may choose to favor marketing the products of our competitors. If distributors do not perform adequately, or if we are unable to enter into effective arrangements with distributors in particular geographic areas, we may not realize our full potential for sales and growth in these areas.

If treatment guidelines for bacterial infections change, or the standard of care evolves, we may need to redesign and seek new marketing authorization from the FDA for our product candidates.

If treatment guidelines for bacterial infections change, or the standard of care evolves, we may need to redesign and seek new marketing authorization from the FDA or other regulatory clearance for our product candidates. If treatment guidelines change so that different treatments become desirable, the ID/AST System may no longer provide the information sought by physicians, and we could be required to seek marketing authorization from the FDA or other regulatory clearance for a revised product.

19




We may not be able to correctly estimate or control our future operating expenses, which could lead to cash shortfalls.

Our operating expenses may fluctuate significantly in the future as a result of a variety of factors, many of which may be outside of our control. These factors include, but are not limited to:

the time and resources required to finalize the development of, and conduct clinical studies and obtain marketing authorization from the FDA or other regulatory clearances for, the ID/AST System;

the expenses we incur for research and development required to maintain and improve our technology, including the final development of the ID/AST System;

the expenses we incur in connection with the development, marketing authorization and regulatory clearance of the use of the ID/AST System to test on additional specimen types;

the costs of preparing, filing, prosecuting, defending and enforcing patent claims and other patent related costs, including litigation costs and the results of such litigation;

the expenses we incur in connection with commercialization activities, including product marketing, sales and distribution expenses;

the costs incurred to build manufacturing capabilities;

the expenses to implement our sales strategy;

the costs to attract and retain personnel with the skills required for effective operations; and

the costs associated with being a public company.

Our budgeted expense levels are based in part on our expectations concerning future revenues from sales of the ID/AST System, as well as our assessment of the future investments needed to expand our commercial organization and support research and development activities in connection with the ID/AST System. We may be unable to reduce our expenditures in a timely manner to compensate for any unexpected events or a shortfall in revenue. Accordingly, a shortfall in demand for our products or other unexpected events could have an immediate and material impact on our cash levels.

Breaches of our information technology systems could have a material adverse effect on our operations and potentially result in liability, depending on the type of breach and information compromised.

We rely on information technology systems to process, transmit and store electronic information, which may include protected health information, in our day-to-day operations. In addition, our research and development operations are highly dependent on our information technology and storage. Our information technology systems have been subjected to computer viruses or other malicious codes and phishing attacks, and we expect to be subject to similar viruses and codes in the future. These attacks could result in our intellectual property, unsecured protected health information, and other confidential information being lost or stolen, including the disclosure of our trade secrets, disruption of our operations, loss of valuable research and development data, the need to notify individuals whose information was disclosed, increased costs for security measures or remediation costs and diversion of management attention and other negative consequences. While we will continue to implement protective measures to reduce the risk of and detect future cyber incidents, cyber-attacks are becoming more sophisticated and frequent, and the techniques used in such attacks change rapidly. There can be no assurance that our protective measures will prevent future attacks that could have a significant impact on our business.

We are dependent on our key employees. If we are unable to recruit, train and retain qualified personnel, we may not achieve our goals.

Because of the complex and technical nature of our products and the dynamic market in which we compete, our future success depends on our ability to recruit, train and retain key personnel, including our senior management, research and development, science and engineering, manufacturing and sales and marketing personnel. In particular,

20



we are highly dependent on the management and business expertise of Lawrence Mehren, our President and Chief Executive Officer. We do not maintain key person life insurance for Mr. Mehren or any of our employees. Our industry is very competitive for qualified personnel. To the extent that the services of Mr. Mehren would be unavailable to us, we may be unable to employ another qualified person with the appropriate background and expertise to replace Mr. Mehren on terms suitable to us. Our growth depends, in particular, on attracting, retaining and motivating highly trained sales personnel with the necessary scientific background and ability to understand our systems and pathogens at a technical level. In addition, we may need additional employees at our manufacturing facilities to meet demand for our products as we scale up our sales and marketing operations.

We face competition from industry participants who may have greater resources than we do.

The industry in which we compete is subject to rapid technological changes, and we face and expect to continue to face competition for our products. We may also face competition from non-medical device companies. Many of our competitors and potential competitors may have substantially greater research and development, financial, manufacturing, customer support, sales and marketing resources, larger customer bases, longer operating histories, greater name recognition and more established relationships in the industry than we do. In addition, some of our competitors may, individually or together with companies affiliated with them, have greater human and scientific resources than we do. Our competitors could develop technologies and methods that are more effective than our current and proposed technologies, including but not limited to the ID/AST System.

We cannot assure you that we will effectively compete or that we will be successful in the face of increasing competition from new products and technologies introduced by existing or new competitors. In addition, we cannot assure you that our future competitors do not have or will not develop products or technologies that enable them to produce competitive products with greater capabilities or at lower costs than our products. Any failure to compete effectively could materially and adversely affect our business, financial condition and operating results.

We expect to generate a portion of our future revenue internationally and are subject to various risks relating to our international activities which could adversely affect our operating results.

Assuming we receive the applicable regulatory approvals, we plan to market and sell the ID/AST System in Europe and other countries outside of the United States in the future. In order to market our products in the European Union and many other foreign jurisdictions, we, or our distributors or partners, must obtain separate regulatory approvals and comply with numerous and varying regulatory requirements regarding safety and efficacy and governing, among other things, clinical studies and commercial sales and distribution of our products. The approval procedure varies among countries and can involve additional testing. In addition, in many countries outside the United States, a product must be approved for reimbursement before the product can be approved for sale in that country. We may not obtain approvals from regulatory authorities outside the United States on a timely basis, if at all, which could harm our ability to expand into markets outside the United States. In addition, engaging in international business involves a number of other difficulties and risks, including:

required compliance with existing and changing foreign healthcare and other regulatory requirements and laws, such as those relating to patient privacy or handling of bio-hazardous waste;

required compliance with anti-bribery laws, such as the U.S. Foreign Corrupt Practices Act and the U.K. Bribery Act, data privacy requirements, labor laws and anti-competition regulations;

export and import restrictions;

various reimbursement and insurance regimes;

laws and business practices favoring local companies;

longer payment cycles and difficulties in enforcing agreements and collecting receivables through certain foreign legal systems;

political and economic instability;

potentially adverse tax consequences, tariffs, customs charges, bureaucratic requirements and other trade barriers;

21




foreign exchange controls;

fluctuations due to changes in foreign currency exchange rates;

difficulties and costs of staffing and managing foreign operations; and

difficulties protecting or procuring intellectual property rights.

Our employees, independent contractors, principal investigators, consultants, commercial partners, vendors and other agents may engage in misconduct or other improper activities, including non-compliance with legal standards and requirements.

We are exposed to the risk of fraud or other misconduct by our employees, independent contractors, principal investigators, consultants, commercial partners, vendors and other agents. Misconduct by these parties could include intentional, reckless or negligent failures to: (i) comply with the laws and regulations of the FDA, the Centers for Medicare and Medicaid Services (“CMS”), the Department of Health and Human Services (“HHS”) Office of Inspector General, Office for Civil Rights and other similar foreign regulatory bodies; (ii) provide true, complete and accurate information to the FDA and other similar regulatory bodies; (iii) comply with manufacturing requirements of the FDA and other similar regulatory bodies and manufacturing standards we have established; (iv) comply with healthcare fraud and abuse laws and regulations in the United States and similar foreign fraudulent misconduct laws; or (v) report financial information or data accurately, or disclose unauthorized activities to us. These laws may impact, among other things, our activities with principal investigators and research subjects, as well as our sales, marketing and education programs. In particular, the promotion, sales, marketing and business arrangements in the healthcare industry are subject to extensive laws and regulations intended to prevent fraud, misconduct, kickbacks, self-dealing, unauthorized use of protected health information and data breaches, and other abusive practices. These laws may restrict or prohibit a wide range of activities related to pricing, discounting, marketing and promotion, patient support, royalty, consulting, research and other business arrangements, as well as the improper use of patient information obtained in the course of clinical studies. We currently have a code of conduct applicable to all of our employees, but it is not always possible to identify and deter employee misconduct, and our code of conduct and the other precautions we take to detect and prevent this activity may not be effective in controlling unknown or unmanaged risks or losses, or in protecting us from governmental investigations or other actions or lawsuits stemming from a failure to comply with these laws or regulations. If any such actions are instituted against us, and we are not successful in defending ourselves or asserting our rights, those actions could have a significant impact on our business, including the imposition of civil, criminal and administrative penalties, damages, monetary fines, disgorgement, individual imprisonment, corporate integrity agreements, possible exclusion from participation in Medicare, Medicaid and other federal healthcare programs, contractual damages, reputational harm, diminished profits and future earnings, and curtailment of our operations. Any of these actions or investigations could result in substantial costs to us, including legal fees, and divert the attention of management from operating our business.

We may be unable to successfully manage our growth.

We expect to expand our operations following marketing authorization from the FDA and regulatory clearance and the commercial launch of the ID/AST System. We intend to develop a targeted sales force in connection with our commercialization efforts. Our growth has placed and will continue to place a significant strain on our management, operating and financial systems and our sales, marketing and administrative resources. As a result of our growth, operating costs may escalate faster than planned, and some of our internal systems and processes, including those relating to manufacturing our products, may need to be enhanced, updated or replaced.

We also plan to introduce additional test kits for use on the Accelerate ID/AST System to enable its use with other sample types (e.g., respiratory samples, skin, soft tissue and urine), and plan to invest in the development of additional instruments, tests and other microbiology solutions. If we cannot effectively manage our expanding operations, manufacturing capacity and costs, including scaling to meet increased demand, we may not be able to continue to grow or we may grow at a slower pace than expected.

We may in the future be subject to shareholder lawsuits, including purported class actions, which is expensive and could divert the attention of management away from our business. In addition, any adverse result of such litigation could negatively impact our financial condition or results of operations.


22



In the past, companies such as Accelerate that have experienced volatility in the market price of their stock have been subject to an increased incidence of securities class action litigation and other shareholder lawsuits. We may in the future be the target of this type of litigation. Shareholder lawsuits against us, our officers or directors could result in substantial costs and divert the attention of management away from operating our business and other concerns, which could harm our business.

Current macroeconomic conditions and the uncertain economic outlook may remain challenging for the foreseeable future.

Global economic conditions may remain challenging and uncertain for the foreseeable future. These conditions not only limit our access to capital but also make it difficult for our customers, our vendors and us to accurately forecast and plan future business activities, and they could cause U.S. and foreign hospitals and other customers to slow spending on our products, which would delay and lengthen sales cycles. Some of our customers rely on government research grants to fund technology purchases. If negative trends in the economy affect the government’s allocation of funds to research, there may be less grant funding available for certain of our customers to purchase technologies from us. Certain of our customers may face challenges gaining timely access to sufficient credit or may otherwise be faced with budget constraints, which could result in decreased purchases of our products or in an impairment of their ability to make timely payments to us. If our customers do not make timely payments to us, we may be required to assume greater credit risk relating to those customers and increase our allowance for doubtful accounts, and our days sales outstanding would be negatively impacted. Although we maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments, we may not continue to experience the same loss rates that we have in the past. Additionally, challenging macroeconomic conditions and market turbulence may also impact our suppliers, causing them to be unable to supply in a timely manner sufficient quantities of customized components, thereby impairing our ability to manufacture on schedule and at commercially reasonable costs.

Compliance with public company corporate governance and reporting is complex and expensive.

We are subject to laws and regulations affecting our domestic and international operations in a number of areas. Many laws and regulations, notably those adopted in connection with the Sarbanes-Oxley Act of 2002 by the Securities and Exchange Commission (the “SEC”), the Dodd-Frank Wall Street Reform and Consumer Protection Act and The NASDAQ Stock Market, impose obligations on public companies, such as ours, which have increased the scope, complexity and cost of corporate governance, reporting and disclosure practices. Compliance with these laws, regulations and similar requirements may be onerous, requires substantial management time and oversight and requires us to incur significant additional accounting, legal and compliance costs. Any such costs, which may rise in the future as a result of changes in these laws and regulations or in their interpretation could individually or in the aggregate make our products and services more expensive, delay the introduction of new products in one or more regions, or cause us to change or limit our business practices. In addition, our larger competitors may be in a better position to absorb the costs of being a public company. We have implemented policies and procedures designed to ensure compliance with applicable laws and regulations, but there can be no assurance that our employees, contractors or agents will not violate such laws and regulations or our policies and procedures.

Additionally, changes to existing accounting rules and standards and the implementation of new accounting rules or standards, such as tax accounting or revenue recognition rules, may adversely impact our reported financial results and business, and may further require us to incur greater accounting fees.

Our estimates of market opportunity and forecasts of market growth may prove to be inaccurate, and even if the market in which we compete achieves the forecasted growth, our business could fail to grow at similar rates, if at all.

Market opportunity estimates and growth forecasts are subject to significant uncertainty and are based on assumptions and estimates that may not prove to be accurate. The estimates and forecasts in this 10-K relating to the size and expected growth of our market, total available market, estimated test and placement volume and estimated pricing, may prove to be inaccurate, which may have negative consequences, such as us overestimating our potential market opportunity. Even if the market in which we compete meets our size estimates and forecasted growth, our business could fail to grow at similar rates, if at all.

Our reputation, ability to do business and financial results may be impaired by improper conduct by any of our employees, agents or any business partners.


23



We cannot provide assurance that our internal controls and compliance systems will always protect us from acts committed by employees, agents or business partners that would violate U.S. and/or non-U.S. laws, including the laws governing payments to government officials, bribery, fraud, kickbacks and false claims, pricing, sales and marketing practices, conflicts of interest, competition, export and import compliance, money laundering and data privacy. In particular, the U.S. Foreign Corrupt Practices Act, the U.K. Bribery Act and similar anti-bribery laws in other jurisdictions generally prohibit companies and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business. Any such improper actions or allegations of such acts could damage our reputation and subject us to civil or criminal investigations in the U.S. and in other jurisdictions and related shareholder lawsuits, could lead to substantial civil and criminal, monetary and non-monetary penalties and could cause us to incur significant legal and investigatory fees.

Risks related to our intellectual property

If we are unable to effectively protect our non-patented intellectual property, our business would be harmed.

In addition to patent protection, we rely on trademark, copyright, trade secret protection and confidentiality agreements to protect the intellectual property rights related to our proprietary technologies, both in the United States and in other countries. If we fail to protect our intellectual property, third parties may be able to compete more effectively against us and we may incur substantial litigation costs in our attempts to recover or restrict use of our intellectual property. We own or exclusively license 12 issued U.S. patents and 16 pending U.S. patent applications, including provisional and non-provisional filings. We also own or exclusively license 13 pending or granted counterpart applications worldwide. In addition to our patents, we possess an array of unpatented proprietary technology and know-how, and we license intellectual property rights to and from third parties. The strength of patents in our field involves complex legal and scientific questions. Uncertainty created by these questions means that our patents may provide only limited protection and may not adequately protect our rights or permit us to gain or keep any competitive advantage. In addition, competitors could purchase our products and attempt to replicate some or all of the competitive advantages we derive from our development efforts, willfully infringe our intellectual property rights, design around our protected technology or develop their own competitive technologies that fall outside of the protections provided by our intellectual property rights. If our intellectual property, including licensed intellectual property, does not adequately protect our market position against competitors’ products and methods, our competitive position could be adversely affected, as could our business.

Further, if we are unable to prevent unauthorized disclosure of our non-patented intellectual property, and there is no guarantee that we will have any such enforceable trade secret protection, we may not be able to establish or maintain a competitive advantage. In addition, the laws of some foreign countries do not protect proprietary rights to the same extent or in the same manner as the laws of the United States. As a result, we may encounter significant problems in protecting and defending our intellectual property both in the United States and abroad.

We may not be successful in our currently pending or future patent applications, and even if such applications are successful, we cannot guarantee that the resulting patents will sufficiently protect our products and proprietary technology.

We cannot assure you that any of our currently pending or future patent applications will result in issued patents with claims that cover our products and technologies in the United States or in other foreign countries, and we cannot predict how long it will take for such patents to be issued. Further, issuance of a patent is not conclusive as to its inventorship or scope, and there is no guarantee that our issued patents will include claims that are sufficiently broad to cover our technologies or to provide meaningful protection from our competitors. Further, we cannot be certain that all relevant prior art relating to our patents and patent applications has been found. Accordingly, there may be prior art that can invalidate our issued patents or prevent a patent from issuing from a pending patent application, at all or with claims that have a scope broad enough to provide meaningful protection from our competitors.

Even if patents do successfully issue and even if such patents cover our products and technologies, we cannot assure you that other parties will not challenge the validity, enforceability or scope of such issued patents in the United States and in foreign countries, including by proceedings such as reexamination, inter-partes review, interference, opposition, or other patent office or court proceedings. The strength of patents in our field involves complex legal and scientific questions. Moreover, we cannot assure you that if such patents were challenged in court or before a regulatory agency that the patent claims will be held valid, enforceable, to be sufficiently broad to cover our technologies or to

24



provide meaningful protection from our competitors. Nor can we assure you that the court or agency will uphold our ownership rights in such patents. Accordingly, we cannot guarantee that we will be successful in defending challenges made against our patents and patent applications. Any successful third-party challenge to our patents could result in the unenforceability or invalidity of such patents, or narrowing of claim scope, such that we could be deprived of patent protection necessary for the successful commercialization of our products and technologies, which could adversely affect our business.

Furthermore, even if they are unchallenged, our patents and patent applications may not adequately protect our intellectual property, provide exclusivity for our products and technologies or prevent others from designing around our claims. Others may independently develop similar or alternative products and technologies or duplicate any of our products and technologies. These products and technologies may not be covered by claims of issued patents we hold. Any of these outcomes could impair our ability to prevent competition from third parties, which may have an adverse impact on our business.

Further, if we encounter delays in regulatory approvals, the period of time during which we could market a product under patent protection could be reduced. Since patent applications in the United States and most other countries are confidential for a period of time after filing, and some remain so until issued, we cannot be certain that we were the first to make the inventions covered by our pending patent applications, or that we were the first to file any patent application related to a product candidate. Furthermore, if third parties have filed such patent applications, an interference proceeding in the United States can be initiated by a third party to determine who was the first to invent any of the subject matter covered by the patent claims of our applications. In addition, patents have a limited lifespan. In the United States, the natural expiration of a patent is generally 20 years after it is filed. Various extensions may be available; however the life of a patent, and the protection it affords, is limited.

We may become involved in lawsuits to protect or enforce our patents or other intellectual property, which could be expensive and time consuming.

Third parties may infringe or misappropriate our intellectual property, including our existing patents and patents that we may issue to us in the future. As a result, we may be required to file infringement claims to stop third-party infringement or unauthorized use. Further, we may not be able to prevent misappropriation of our intellectual property rights, particularly in countries where the laws may not protect those rights as fully as in the United States.

If we file an infringement action against a third party, that party may challenge the scope, validity or enforceability of our patents, requiring us to engage in complex, lengthy and costly litigation or other proceedings. Such litigation and administrative proceedings could result in revocation of our patents or amendment of our patents such that they do not cover our product candidates. They may also put our pending patent applications at risk of not issuing or issuing with limited and potentially inadequate scope to cover our product candidates. The outcome following legal assertions of invalidity and unenforceability is unpredictable.

Enforcing our intellectual property rights through litigation is very expensive and time-consuming. Some of our competitors may be able to sustain the costs of litigation more effectively than we can because of greater financial resources. Patent litigation and other proceedings may also absorb significant management time. Furthermore, because of the substantial amount of discovery required in connection with intellectual property litigation or administrative proceedings, there is a risk that some of our confidential information could be compromised by disclosure. The occurrence of any of the foregoing could have a material adverse effect on our business, financial condition or results of operations.

We could face claims that our proprietary technologies infringe on the intellectual property rights of others.

Due to the significant number of U.S. and foreign patents issued to, and other intellectual property rights owned by, entities operating in the industry in which we operate, we believe that there is a risk of litigation arising from infringement of these patents and other rights. Third parties may assert infringement or other intellectual property claims against us or our licensees.

In addition, patent applications in the United States and many foreign jurisdictions are typically not published until 18 months after the earliest filing date for which a benefit is claimed. For this reason, and because publications in the scientific literature often lag behind actual discoveries, we cannot be certain that others have not filed patent applications for technology covered by our issued patents or our pending applications or that we were the first to invent

25



the technology. Another party may have filed or may in the future file patent applications covering our products or technology similar to ours. Under the “first to invent” rules applicable to patents filed before March 2013, any such patent application may have priority over our patent applications or patents, which could further require us to obtain rights to issued patents covering such technologies. If another party has filed a U.S. patent application on inventions similar to ours, we may have to participate in an interference proceeding declared by the U.S. Patent and Trademark Office to determine priority of invention in the United States. The costs of these proceedings could be substantial, and it is possible that such efforts would be unsuccessful if the other party had independently arrived at the same or similar invention prior to our own invention, resulting in a loss of our U.S. patent position with respect to such inventions.

We may have to pay substantial damages, including treble damages, for past infringement if it is ultimately determined that our products infringe on a third party’s proprietary rights. In addition, even if such claims are without merit, defending a lawsuit may result in substantial expense to us and divert the efforts of our technical and management personnel. We may also be subject to significant damages or injunctions against development and sale of some of our products. Furthermore, claims of intellectual property infringement may require us to enter into royalty or license agreements with third parties, and we may be unable to obtain royalty or license agreements on commercially acceptable terms, if at all.

We may be subject to claims by third parties asserting that our employees or we have misappropriated their intellectual property, or claiming ownership of what we regard as our own intellectual property.

Many of our employees were previously employed at universities or other biotechnology or pharmaceutical companies, including our competitors or potential competitors. Although we try to ensure that our employees do not use the proprietary information or know-how of others in their work for us, we may be subject to claims that these employees or we have used or disclosed intellectual property, including trade secrets or other proprietary information, of any such employee’s former employer. Litigation may be necessary to defend against these claims.

In addition, while it is our policy to require our employees and contractors who may be involved in the development of intellectual property to execute agreements assigning such intellectual property to us, we may be unsuccessful in executing such an agreement with each party who in fact develops intellectual property that we regard as our own. Our and their assignment agreements may not be self-executing or may be breached, and we may be forced to bring claims against third parties, or defend claims they may bring against us, to determine the ownership of what we regard as our intellectual property.

If we fail in prosecuting or defending any such claims, in addition to paying monetary damages, we may lose valuable intellectual property rights or personnel. Even if we are successful in prosecuting or defending against such claims, litigation could result in substantial costs and be a distraction to management.

Risks related to our research and development activities

We have a single research and development facility and we may be unable to continue to conduct our research and development activities if we lose this facility. If our facility or our equipment were damaged or destroyed, or if we experience a significant disruption in our operations for any reason, our ability to continue to operate our business could be materially harmed.

We currently conduct all of our research and development and product development activities in our existing facility in Tucson, Arizona. If this facility were to be damaged, destroyed or otherwise unable to operate, whether due to fire, floods, storms, tornadoes, other natural disasters, employee malfeasance, terrorist acts, power outages or otherwise, or if our business is disrupted for any other reason, we may not be able to finalize the development of the ID/AST System or any future products or test our products as promptly as our potential customers expect, or possibly not at all, and we would have no other means of conducting such activities until we were able to restore such capabilities at the current facility or develop an alternative facility. Further, in such an event, we may lose revenue and significant time during which we might otherwise have conducted research and development and product development activities. Further, we may not be able to maintain our relationships with our licensees or customers.

The manufacture of components of the ID/AST System involves complex processes, sophisticated equipment and strict adherence to specifications and quality systems procedures. Any unforeseen manufacturing problems, such as contamination of our facility, equipment malfunction or failure to strictly follow procedures or meet specifications, could result in delays or shortfalls in production of our products. Identifying and resolving the cause of any manufacturing issues could require substantial time and resources. If we are unable to keep up with future demand for our products

26



by successfully manufacturing and shipping our products in a timely manner, our revenue growth could be impaired and market acceptance of our product candidates could be adversely affected.

While we carry a nominal amount of business interruption insurance to cover lost revenue and profits, this insurance does not cover all possible situations. If we have underestimated our insurance needs with respect to an interruption, or if an interruption is not subject to coverage under our insurance policies, we may not be able to cover our losses. In addition, our business interruption insurance would not compensate us for the loss of opportunity and potential adverse impact on relations with our licensees or customers.

We use hazardous materials in some of our research, development and manufacturing processes and face the accompanying risks and regulations governing environmental safety.

Our operations are subject to complex and stringent environmental, health, safety and other governmental laws and regulations that both public officials and private individuals may seek to enforce. In particular, our research activities sometimes involve the controlled use of various hazardous materials. Although we believe that our safety procedures for handling and disposing of such materials comply with the standards prescribed by state and federal regulations, the risk of accidental contamination or injury from these materials cannot be completely eliminated, and we may not be in compliance with these regulations. In addition, existing laws and regulations may also be revised or reinterpreted, or new laws and regulations may become applicable to us, whether retroactively or prospectively, causing us to incur additional compliance costs and/or change the manner in which we operate. We could be held liable for any damages that might result from any accident or release involving hazardous materials.

Disruptions in the supply of raw materials, consumable goods or other key product components, or issues associated with their quality from our single source suppliers, could result in a significant disruption in sales and profitability.

We must manufacture or engage third parties to manufacture components of our products in sufficient quantities and on a timely basis, while maintaining product quality, acceptable manufacturing costs and complying with regulatory requirements. Our components are custom-made by only a few outside suppliers. In certain instances, we have a sole source supply for key product components of the ID/AST System. We may be unable to satisfy our forecasted demand from existing suppliers for our products, or we may be unable to find alternative suppliers for key product components or ancillary items at reasonably comparable prices. If this occurs, we may be unable to manufacture our products and/or meet our customers’ needs in a timely manner or at all.

Additionally, we have entered into supply agreements with most of our suppliers to help ensure component availability and flexible purchasing terms with respect to the purchase of such components. If our suppliers discontinue production of a key component for one or more of our products, we may be unable to identify or secure a viable alternative on reasonable terms, or at all, which could limit our ability to manufacture our products. While we may be able to modify our product candidates to utilize a new source of components, we may need to secure marketing authorization from the FDA or other regulatory clearance for the modified product, and it could take considerable time and expense to perform the requisite tasks prior to seeking such authorization.

In determining the required quantities of our products and our manufacturing schedule, we will need to make significant judgments and estimates regarding factors such as market trends and any seasonality with respect to our sales. Because of the inherent nature of estimates and our lack of experience marketing the ID/AST System, there could be significant differences between our estimates and the actual amounts of products we require. This can result in shortages if we fail to anticipate demand, or excess inventory and write-offs if we order more than we need.

Reliance on third-party manufacturers entails risk to which we would not be subject if we manufactured these components ourselves, including:

reliance on third parties for regulatory compliance and quality assurance;

possible breaches of manufacturing agreements by the third parties because of factors beyond our control;

possible regulatory violations or manufacturing problems experienced by our suppliers;

possible termination or non-renewal of agreements by third parties, based on their own business priorities, at times that are costly or inconvenient for us;

27




the potential obsolescence and/or inability of our suppliers to obtain required components;

the potential delays and expenses of seeking alternate sources of supply or manufacturing services;

the inability to qualify alternate sources without impacting performance claims of our products;

reduced control over pricing, quality and timely delivery due to the difficulties in switching to alternate suppliers or assemblers; and

increases in prices of raw materials and key components.

The manufacturing operations for the ID/AST System use highly technical processes involving unique, proprietary techniques. In addition, the manufacturing equipment we use would be costly to repair or replace and could require substantial lead time to repair or replace. Any interruption in our operations or decrease in the production capacity of our manufacturing facility or the facilities of any of our suppliers because of equipment failure, natural disasters such as earthquakes, tornadoes and fires, or otherwise, would limit our ability to meet customer demand for our products. In the event of a disruption, we may lose customers and we may be unable to regain those customers thereafter. Our insurance may not be sufficient to cover all of our potential losses and may not continue to be available to us on acceptable terms, or at all.

We have made and intend to make significant additional investments in research and development, but there is no guarantee that any of these investments will ultimately result in a commercial product that will generate revenues.

The ID/AST System integrates several of our component products, systems and processes. We have dedicated significant resources on research and development activities, and we intend to spend significantly more on research and development activities. Notwithstanding these investments, we anticipate that we will have to spend additional funds in the research and development of the ID/AST System, particularly with respect to its use for additional specimen types. There can be no assurance that we will be able to obtain marketing authorization from the FDA of the ID/AST System or that we will be able to expand its use for additional specimen types. There can also be no assurance that we will be able to develop additional types of tests and instruments in the future.

Risks related to government regulation

We and our suppliers, contract manufacturers and customers are subject to various governmental laws and regulations, and we may incur significant expenses to comply with, and experience delays in our product commercialization as a result of, these laws and regulations.

Our operations are affected by various state, federal, and international healthcare, environmental, anti-corruption, fraud and abuse (including anti-kickback and false claims laws), privacy, and employment laws. Violations of these laws can result in criminal or civil sanctions, including substantial fines and, in some cases, exclusion from participation in federal health care programs such as Medicare and Medicaid and individual liability and imprisonment.

We are also subject to extensive regulation by the FDA pursuant to the Federal Food, Drug, and Cosmetic Act, by comparable agencies in foreign countries and by other regulatory agencies and governing bodies. Following the introduction of a product, these and other government agencies will periodically review our manufacturing processes, product performance and compliance with applicable requirements.

We are also subject to various U.S. healthcare related laws regulating sales, contracting, marketing, and other business arrangements and the use and disclosure of individually identifiable health information. These include but are not limited to:

The federal Anti-Kickback Statute, which prohibits persons from knowingly and willfully offering, providing, soliciting, or receiving any remuneration, directly or indirectly, in exchange for or to induce the referral of an individual, or the purchasing, leasing, ordering, recommending, furnishing or arranging for a good or service, for which payment may be made under a federal health care program, such as Medicare or Medicaid.


28



The Health Insurance Portability and Accountability Act of 1996 (“HIPAA”), which prohibits knowingly and willfully (i) executing a scheme to defraud any health care benefit program, including private payors, or (ii) falsifying, concealing or covering up a material fact or making any materially false, fictitious or fraudulent statement in connection with the delivery of or payment for items or services under a health care benefit program.

HIPAA, as amended by the Health Information Technology for Economic and Clinical Health Act of 2009, which also restricts the use and disclosure of protected health information, mandates the adoption of standards relating to the privacy and security of protected health information, and requires us to report certain security breaches to health care provider customers with respect to such information where we are acting as a HIPAA business associate to that customer.

The federal Physician Payment Sunshine Act, which requires manufacturers of certain medical devices to track payments or other transfers of value given to U.S. licensed physicians or teaching hospitals and to report this data to CMS annually for subsequent public disclosure.

The federal False Claims Act, which imposes liability on any person or entity that, among other things, knowingly presents, or causes to be presented, a false or fraudulent claim for payment by a federal health care program. The qui tam provisions of the False Claims Act allow a private individual to bring actions on behalf of the federal government alleging that the defendant has submitted a false claim to the federal government and to share in any monetary recovery.

Similar requirements have been adopted by many states and foreign countries. Violations of any of these laws can lead to additional legal risk such as risk of plaintiff class actions, state Attorney General actions, and investigations by the Federal Trade Commission, among others.

Failure to comply with applicable requirements, or later discovery of previously unknown problems with our products or manufacturing processes, including our failure or the failure of one of our contract manufacturers to take satisfactory corrective action in response to an adverse inspection, can result in, among other things:

administrative or judicially imposed sanctions;

injunctions or the imposition of civil penalties;

recall or seizure of our products;

total or partial suspension of production or distribution;

withdrawal or suspension of marketing clearances or approvals;

clinical holds;

warning letters;

refusal to permit the import or export of our products;

criminal prosecution; and

exclusion or debarment from participation in federal health care programs such as Medicare and Medicaid.

Any of these actions, in combination or alone, could prevent us from marketing, distributing and selling our products.

In addition, we have developed, configured and we intend to market our products to meet customer needs created by these various regulations. Any significant change in these regulations could reduce demand for our products. Governmental agencies may also impose new requirements regarding registration, labeling or prohibited materials that may require us to modify or re-register products already on the market or otherwise adversely impact our ability to market our products.

29




In addition, a product defect or regulatory violation could lead to a government-mandated or voluntary recall by us. We believe that the FDA would request that we initiate a voluntary recall if a product was defective or presented a risk of injury or gross deception. Regulatory agencies in other countries have similar authority to recall devices because of material deficiencies or defects in design or manufacture that could endanger health. Any recall would divert management attention and financial resources, could cause the price of our shares of common stock to decline, expose us to product liability or other claims (including contractual claims from parties to whom we sold products) and harm our reputation with customers.

The use of our diagnostic products by our customers is also affected by the Clinical Laboratory Improvement Amendments (“CLIA”) and related federal and state regulations that provide for regulation of laboratory testing. CLIA is intended to ensure the quality and reliability of clinical laboratories in the United States by mandating specific standards in the areas of personnel qualifications, administration, participation in proficiency testing, patient test management, quality assurance, quality control and inspections. Current or future CLIA requirements or the promulgation of additional regulations affecting laboratory testing may prevent some laboratories, hospitals, providers or other customers with laboratories from using some or all of our diagnostic products.

Maintaining adequate sales of our product may depend on the availability of adequate reimbursement to our customers from third-party payors, including government programs such as Medicare and Medicaid, private insurance plans, and managed care programs.

Maintaining and growing sales of our product, if approved, may depend in part on the availability of adequate reimbursement to our customers from third-party payors, including government programs such as Medicare and Medicaid, private insurance plans and managed care programs. Hospitals, clinical laboratories and other healthcare provider customers that may purchase our products generally bill various third-party payors to cover all or a portion of the costs and fees associated with diagnostic tests, including the cost of the purchase of our products. We currently expect that all of our diagnostic tests will be performed in a hospital inpatient setting, where governmental payors, such as Medicare, generally reimburse hospitals a single bundled payment that is based on the patient’s diagnosis under a classification system known as the Medicare severity diagnosis-related groups (MS-DRGs) classification for all items and services provided to the patient during a single hospitalization, regardless of whether our diagnostic tests are performed during such hospitalization. As a result, our customers’ access to adequate payment by government and private insurance plans is central to the acceptance of our products. We may be unable to sell our products, if approved, on a profitable basis if third-party payors reduce their current levels of payment or if our costs of production increase faster than increases in reimbursement levels.

Additionally, third-party payors are increasingly reducing reimbursement for medical products and services. In addition, the U.S. government, state legislatures, and foreign governments have and may continue to implement cost-containment measures and more restrictive policies, including price controls and restrictions on reimbursement. For example, the Budget Control Act of 2011 (the “Budget Control Act”) established a process to reduce federal budget deficits through an automatic “sequestration” process if deficit reductions targets are not otherwise reached. Under the terms of the Budget Control Act, sequestration imposes cuts to a wide range of federal programs, including Medicare, which is subject to a two percent cut. The Bipartisan Budget Act of 2013 extended the two percent sequestration cut for Medicare through fiscal year 2023, and a bill signed by the President on February 15, 2014 further extended this cut for an additional year, through fiscal year 2024. For fiscal year 2024, however, Medicare sequestration amounts will be realigned such that there will be a four percent sequester for the first six months and no sequester for the second six months, under the Protecting Access to Medicare Act of 2014.

While we cannot predict whether third-party reimbursement to our customers will be adequate, cost-containment measures and similar efforts by third-party payors, including government programs such as Medicare and Medicaid, could substantially impact the sales of our products and potentially limit our net revenue and results.

We may be adversely affected by healthcare policy changes, including additional healthcare reform and changes in managed healthcare.

Healthcare reform and the growth of managed care organizations have been considerable forces in the medical diagnostics industry and in recent political discussions. These forces have placed, and are expected to continue to place, constraints on the levels of overall pricing for healthcare products and services as well as the coverage available by public and private insurance and thus, could have a material adverse effect on the future profit margins of our products or the amounts that we are able to receive from third parties for the licensing of our products. Changes in

30



the United States healthcare market could also force us to alter our approach to selling, marketing, distributing and servicing our products and customer base. In and outside the United States, changes to government reimbursement policies could reduce the funding that healthcare service providers have available for diagnostic product expenditures, which could have a material adverse impact on the use of the products we are developing and our future sales, license and royalty fees and profit margin.

For example, the Affordable Care Act (the “ACA”), enacted in March 2010, made changes that have significantly impacted the medical device industry and other healthcare providers. The legislation requires, among other mandates, that certain medical device manufacturers pay an excise tax in an amount equal to 2.3% of the price for which such manufacturer sells its medical devices. We will be subject to this tax once we begin selling the ID/AST System. The ACA also requires CMS to reduce payments to hospitals reimbursed under Medicare’s Inpatient Prospective Payment System (“IPPS”) that have excess readmissions. These and other applicable requirements set forth under the ACA and its current and future implementing regulations may significantly increase our costs, and/or reduce our customer’s ability to obtain adequate reimbursement for tests performed with our products, which could adversely affect our business and financial condition.

In recent years, other legislative, regulatory, and political changes aimed at regulating healthcare delivery in general and clinical laboratory tests in particular have been proposed and adopted in the United States. Reimbursement for the laboratory industry is under significant pressure. In January 2015, HHS announced a plan to shift the Medicare program and the healthcare system at large, toward paying providers based on quality, rather than the quantity of care provided to patients. On July 31, 2015, CMS issued a final rule addressing the IPPS for fiscal year 2016, which included penalties for readmissions and for hospitals in the worst performing quartile of the Hospital Acquired Condition Reduction Program. With respect to clinical laboratory tests, on April 1, 2014, President Obama signed into law the Protecting Access to Medicare Act of 2014 (“PAMA”), revamping Medicare’s clinical laboratory reimbursement system to tie Medicare payment rates to private market rates beginning in 2017. CMS then released a proposed rule on September 25, 2015 to implement such provisions of PAMA, requiring applicable clinical laboratories to report private payor reimbursement rates and volume data for tests on the clinical laboratory fee schedule. These measures can result in reduced prices, added costs, and decreased test utilization for our customers, although the full impact on our business of the ACA, changes to the IPPS, PAMA, and other applicable laws, regulations, and policies is uncertain.

We cannot predict whether future healthcare initiatives will be implemented at the federal or state level or in countries outside of the United States in which we may do business, or the effect of any future legislation or regulation will have on our industry generally, our ability to successfully commercialize the ID/AST System, and our overall business operations. Changes in healthcare policy could substantially impact the sales of our tests, increase costs and divert management’s attention from our business. For example, expansion in the government’s regulation of the United States healthcare system may result in decreased profits to us, lower reimbursements to our customers for laboratory testing or reduced medical procedure volumes.

The regulatory processes applicable to our products and operations are expensive, time-consuming, and uncertain and may prevent us from obtaining required approvals for the commercialization of our products.

Our products, including the ID/AST System, are regulated as medical device products by the FDA and comparable agencies of other countries. In particular, FDA regulations govern activities such as product development, product testing, product labeling, product storage, premarket clearance or approval, manufacturing, advertising, promotion, product sales, reporting of certain product failures and distribution. Some of our products, depending on their intended use, will require approval of a premarket approval application (“PMA”) or clearance of a 510(k) notification from the FDA prior to marketing. The FDA has committed to review most 510(k) decisions within 90 days, but the review may be delayed due to requests for additional information. A decision may take significantly longer, and clearance is never assured. The PMA process is much more costly, lengthy and uncertain. The FDA has committed to review most PMAs within 180 days where an advisory panel is not required and within 320 days where an advisory panel is required, but the review may be delayed due to requests for additional information. A decision may take significantly longer, and approval is never assured. In the 510(k) clearance process, the FDA must determine that a proposed device is “substantially equivalent” to a device legally on the market, known as a “predicate” device, with respect to intended use, technology and safety and effectiveness, in order to clear the proposed device for marketing. Clinical data is sometimes required to support substantial equivalence. The PMA pathway requires an applicant to demonstrate the safety and effectiveness of the device based, in part, on extensive data, including technical, preclinical, clinical trial, manufacturing and labeling data. The PMA process is typically required for devices that are deemed to pose the greatest risk, such as life-sustaining, life-supporting or implantable devices. However, some devices are automatically subject to the PMA pathway regardless of the level of risk they pose, because they have not previously

31



been classified into a lower risk class by the FDA. Manufacturers of these devices may request that the FDA review such devices in accordance with the de novo classification procedure, which allows a manufacturer whose novel device would otherwise require the submission and approval of a PMA prior to marketing to request down-classification of the device on the basis that the device presents low or moderate risk. If the FDA agrees with the down-classification, the applicant will then receive authorization to market the device. This device type can then be used as a predicate device for future 510(k) submissions.

The FDA can delay, limit or deny clearance or approval of a device for many reasons, including:

we may not be able to demonstrate to the FDA’s satisfaction that our product candidates are safe and effective, sensitive and specific diagnostic tests, for their intended users;

the data from our pre-clinical studies and clinical trials may be insufficient to support clearance or approval, where required; and

the manufacturing process or facilities we or our contract manufacturers use may not meet applicable requirements.

We intend to utilize the de novo classification procedures to seek marketing authorization for the ID/AST System. If the FDA requires us to go through a lengthier, more rigorous examination for our product candidates than we had expected, our product introductions or modifications could be delayed or canceled, which could cause our launch to be delayed or, in the future, our sales to decline. In addition, the FDA may determine that our product candidates require the more costly, lengthy and uncertain PMA process. For example, if the FDA disagrees with our determination that the de novo classification procedures are the appropriate path to obtain marketing authorizations for the ID/AST System product candidates, the FDA may require us to submit a PMA, which is generally more costly and uncertain. The FDA has committed to review most PMAs within 180 days where an advisory panel is not required and within 320 days where an advisory panel is required, but the review may be delayed due to requests for additional information. A decision may take significantly longer, and approval is never assured.

Further, even with respect to those future products where a PMA is not required, we cannot assure you that we will be able to obtain 510(k) clearances with respect to those products. The process of obtaining regulatory clearances or approvals, or completing the de novo classification process, to market a medical device can be costly and time consuming, and we may not be able to successfully obtain pre-market reviews on a timely basis, if at all. Further, even if we were to obtain regulatory clearance, it may not be for the uses we believe are important or commercially attractive, in which case we would not be permitted to market our product for those uses.

Clinical trial data is typically required to support a PMA and is sometimes required for a 510(k) pre-market notification. Although many 510(k) pre-market notifications are cleared without clinical data, in some cases, the FDA requires significant clinical data to support substantial equivalence. We are planning clinical trials for the ID/AST System. Clinical trials are expensive and time-consuming. In addition, the commencement or completion of any clinical trials may be delayed or halted for any number of reasons, including product performance, changes in intended use, changes in medical practice and the opinion of evaluator Institutional Review Boards.

Additionally, since 2009, the FDA has significantly increased the scrutiny applied to its oversight of companies subject to its regulations by hiring new investigators and increasing inspections of manufacturing facilities. The FDA has also undertaken initiatives related to enhancement of the 510(k) review process and has proposed significant changes to the regulation of laboratory developed tests (“LDTs”). We continue to monitor these developments and analyze how they will impact the approval of our products. These and other actions proposed by the FDA’s Center for Devices and Radiological Health could result in significant changes to the 510(k) process, which could complicate the product approval process, although we cannot predict the effect of such changes and cannot ascertain if such changes will have a substantive impact on the approval of our products. If we fail to adequately respond to the increased scrutiny and streamlined 510(k) submission process, our business may be adversely impacted.

Failure to comply with the applicable requirements can result in, among other things, warning letters, administrative or judicially imposed sanctions such as injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, refusal to grant premarket clearance or PMA for devices, withdrawal of marketing clearances or approvals, or criminal prosecution. With regard to products for which we seek 510(k) clearance or PMA approval from the FDA, any failure or material delay to obtain such clearance or approval could harm our business. If the FDA were to disagree with our regulatory assessment and conclude that approval or clearance is necessary to

32



market the products, we could be forced to cease marketing the products and seek approval or clearance. Once clearance or approval has been obtained for a product, there is an obligation to ensure that all applicable FDA and other regulatory requirements continue to be met.

In addition, it is possible that the current regulatory framework could change or additional regulations could arise at any stage during our product development or marketing, which may adversely affect our ability to obtain or maintain approval of our products. For example, in response to industry and healthcare provider concerns regarding the predictability, consistency and rigor of the 510(k) regulatory pathway, the FDA initiated an evaluation of the program, and in January 2011, announced several proposed actions intended to reform the review process governing the clearance of medical devices. The FDA intends for these reform actions to improve the efficiency and transparency of the clearance process, as well as bolster patient safety. In addition, as part of the Food and Drug Administration Safety and Innovation Act, Congress reauthorized the Medical Device User Fee Amendments with various FDA performance goal commitments and enacted several “Medical Device Regulatory Improvements” and miscellaneous reforms that are further intended to clarify and improve medical device regulation both pre- and post-approval. Any delay in, or failure to receive or maintain, clearance or approval for our product candidates could prevent us from generating revenue from these product candidates. Additionally, the FDA and other regulatory authorities have broad enforcement powers. Regulatory enforcement or inquiries, or other increased scrutiny on us, could affect the perceived safety and efficacy of our product candidates and dissuade our customers from using our product candidates, if and when they are authorized for marketing.

Our manufacturing facility located in Tucson, Arizona, where we assemble and produce the ID/AST System, is subject to periodic regulatory inspections by the FDA and other federal and state and foreign regulatory agencies. For example, this facility is subject to Quality System Regulations (“QSR”) of the FDA and is subject to annual inspection and licensing by the State of Arizona. If we fail to maintain this facility in accordance with the QSR requirements, international quality standards or other regulatory requirements, our manufacturing process could be suspended or terminated, which would prevent us from being able to provide products to our customers in a timely fashion.

Sales of our diagnostic product candidates outside the United States are subject to foreign regulatory requirements governing clinical studies, vigilance reporting, marketing approval, manufacturing, product licensing, pricing and reimbursement. These regulatory requirements vary greatly from country to country. As a result, the time required to obtain approvals outside the United States may differ from that required to obtain FDA marketing authorization from the FDA, and we may not be able to obtain foreign regulatory approvals on a timely basis or at all. Marketing authorization from the FDA does not ensure approval by regulatory authorities in other countries, and approval by one foreign regulatory authority does not ensure clearance or approval by regulatory authorities in other countries or by the FDA. Foreign regulatory authorities could require additional testing. Failure to comply with these regulatory requirements, or to obtain required clearances or approvals, could impair our ability to commercialize our diagnostic product candidates outside of the United States.

Modifications to our products, if cleared or approved, may require new 510(k) clearances or pre-market approvals, or may require us to cease marketing or recall the modified products until clearances are obtained.

Any modification to a device authorized for marketing that could significantly affect its safety or effectiveness, or that would constitute a major change in its intended use, design or manufacture, requires a new 510(k) clearance or, possibly, approval of a PMA supplement or new PMA. The FDA requires every manufacturer to make this determination in the first instance, but the FDA may review any manufacturer’s decision. The FDA may not agree with our decisions regarding whether new clearances or approvals are necessary. If the FDA disagrees with our determination and requires us to submit new 510(k) notifications, PMA supplements or PMAs for modifications to previously cleared or approved products for which we conclude that new clearances or approvals are unnecessary, we may be required to cease marketing or to recall the modified product until we obtain clearance or approval, and we may be subject to significant regulatory fines or penalties.

Furthermore, the FDA’s ongoing review of the 510(k) program may make it more difficult for us to make modifications to any products for which we obtain clearance, either by imposing more strict requirements on when a manufacturer must submit a new 510(k) for a modification to a previously cleared product, or by applying more onerous review criteria to such submissions. The practical impact of the FDA’s continuing scrutiny of the 510(k) program remains unclear.

We rely on third parties to conduct studies of our products that may be required by the FDA or other regulatory authorities, and those third parties may not perform satisfactorily.

33




We rely on third parties, including medical investigators, to conduct studies on our products. Our reliance on these third parties for clinical development activities will reduce our control over these activities. These third parties may not complete activities on schedule or conduct studies in accordance with regulatory requirements or our study design. If applicable, our reliance on third parties that we do not control will not relieve us of any applicable requirement to prepare, and ensure compliance with, various procedures required under good clinical practices. If these third parties do not successfully carry out their contractual duties or regulatory obligations or meet expected deadlines, if the third parties need to be replaced or if the quality or accuracy of the data they obtain is compromised due to their failure to adhere to our clinical protocols or regulatory requirements or for other reasons, our studies may be extended, delayed, suspended or terminated, and we may not be able to obtain marketing authorization from the FDA or regulatory clearance for our products.

If we obtain marketing authorization from the FDA, a recall of our products, either voluntarily or at the direction of the FDA, or the discovery of serious safety issues with our products that leads to corrective actions, could have a significant adverse impact on us.

The FDA and similar foreign governmental authorities have the authority to require the recall of commercialized products. Manufacturers may, under their own initiative, recall a product if any material deficiency in a device is found. A government-mandated or voluntary recall by us or one of our distributors could occur as a result of an unacceptable risk to health, component failures, manufacturing errors, design or labeling defects or other deficiencies and issues. Under the FDA’s medical device reporting regulations, we are required to report to the FDA any incident in which our product may have caused or contributed to a death or serious injury or in which our product malfunctioned and, if the malfunction were to recur, would likely cause or contribute to death or serious injury. Repeated product malfunctions may result in a voluntary or involuntary product recall. Recalls of any of our products would divert managerial and financial resources, have an adverse effect on our reputation, and may impair our ability to produce our products in a cost-effective and timely manner in order to meet our customers’ demands. Depending on the corrective action we take to redress a product’s deficiencies or defects, the FDA may require, or we may decide that we will need to obtain, new approvals or clearances for the device before we may market or distribute the corrected device. Seeking such approvals or clearances may delay our ability to replace the recalled devices in a timely manner. Moreover, if we do not adequately address problems associated with our devices, we may face additional regulatory enforcement action, including FDA warning letters, product seizure, injunctions, administrative penalties, or civil or criminal fines. We may also be required to bear other costs or take other actions that may have a negative impact on our sales as well as face significant adverse publicity or regulatory consequences, which could harm our ability to market our products in the future.

Any adverse event involving our products could result in future voluntary corrective actions, such as recalls or customer notifications, or agency action, such as inspection, mandatory recall or other enforcement action. Any corrective action, whether voluntary or involuntary, as well as defending ourselves in a lawsuit, would require the dedication of our time and capital, distract management from operating our business and may harm our reputation.

Risks related to our common stock and this offering

Our stock price has been volatile and may continue to be volatile and traded on low volumes.

The trading price of our common stock has been, and is likely to continue to be, highly volatile. One factor contributing to volatility in the price of our common stock is the low trading volume currently prevailing in the market for our shares. Further, due to the concentration of the stock the sale of one individual shareholder may have a material impact on the price of the stock. The market value of your investment in our common stock may rise or fall sharply at any time because of this volatility and also because of significant short positions that may be taken by investors from time to time in our common stock. During the year ended December 31, 2014, the sale price for our common stock ranged from $11.01 to $31.86 per share, and during the year ended December 31, 2015, the sale price for our common stock has ranged from $14.77 to $31.29. The market prices for securities of medical technology companies like us historically have been highly volatile, and the market has experienced significant price and volume fluctuations that are unrelated to the operating performance of particular companies.

The ownership of our common stock is highly concentrated.

As of December 31, 2015, our directors and executive officers, together with members of their immediate families, as a group, will beneficially own, in the aggregate, approximately 49% of our outstanding capital stock, including

34



26% held by our director, Jack Schuler. As a result, these stockholders will be able to affect the outcome of, or exert significant influence over, all matters requiring stockholder approval, including the election and removal of directors and any change in control. In particular, this concentration of ownership of our common stock could have the effect of delaying or preventing a change in control of us or otherwise discouraging or preventing a potential acquirer from attempting to obtain control of us. This, in turn, could have a negative effect on the market price of our common stock. It could also prevent our stockholders from realizing a premium over the market prices for their shares of common stock. Moreover, the interests of this concentration of ownership may not always coincide with our interests or the interests of other stockholders. The concentration of ownership also contributes to the low trading volume and volatility of our common stock.

Future sales of shares of our common stock may depress the price of our shares and be dilutive to our existing stockholders.

We cannot predict whether future issuances of shares of our common stock or the availability of shares for resale in the open market will decrease the market price per share of our common stock. Any sales by us or by our existing stockholders of a substantial number of shares of our common stock in the public market, or the perception that such sales might occur, may cause the market price of our shares to decline. The exercise of any options or warrants, the issuance of our common stock in connection with acquisitions and other issuances of our common stock could have an adverse effect on the market price of the shares of our common stock.

To the extent that we raise additional funds through the sale of equity or convertible debt securities, the issuance of such securities will result in dilution to our stockholders. Investors purchasing shares or other securities in the future could have rights superior to existing stockholders. The price per share at which we sell additional shares of our common stock, or securities convertible or exchangeable into common stock, in future transactions may be higher or lower than the price per share paid by investors in this offering. In addition, we have a significant number of options and warrants outstanding. If the holders of these options or warrants exercise such securities, you may incur further dilution.

We may require additional capital in the future, and you may incur dilution to your stock holdings.

We have primarily relied upon capital from the sale of our securities to fund our operations, and we expect that we will continue to incur operating losses until we are able to finalize the development of and commercialize the ID/AST System and sell it into the marketplace or license it to a third party. If capital requirements vary materially from those currently forecast by management, we may require additional capital sooner than expected. We may also require additional capital in the future to expand our product offerings, expand our sales and marketing infrastructure, increase our manufacturing capacity, fund our operations, and continue our research and development activities. Our future funding requirements will depend on many factors, including:

our ability to obtain marketing authorization from the FDA or clearance from the FDA to market our product candidates;

market acceptance of our product candidates, if cleared;

the cost and timing of establishing sales, marketing and distribution capabilities;

the cost of our research and development activities;

the ability of healthcare providers to obtain coverage and adequate reimbursement by third-party payors for procedures using our products;

the cost and timing of marketing authorization or regulatory clearances;

the cost of goods associated with our product candidates;

the effect of competing technological and market developments; and

the extent to which we acquire or invest in businesses, products and technologies, including entering into licensing or collaboration arrangements for product candidates, although we currently have no commitments or agreements to complete any such transactions.

35




If we require additional capital, we may attempt to raise it through a variety of strategies, including the issuance and sale of additional shares of our common stock. Issuances of additional shares of our common stock or preferred stock in the future, whether in connection with a rights offering, follow-on offering or otherwise, would dilute existing stockholders and may adversely affect the market price of our common stock.

We cannot assure you that we will be able to obtain additional funds on acceptable terms, or at all. Debt financing, if available, may involve covenants restricting our operations or our ability to incur additional debt. Any debt or additional equity financing that we raise may contain terms that are not favorable to us or our stockholders. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or our products, or grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to liquidate some or all of our assets or delay, reduce the scope of or eliminate some or all of our product development.

If we do not have, or are not able to obtain, sufficient funds, we may be required to delay development or commercialization of the ID/AST System or license to third parties the rights to commercialize our products or technologies that we would otherwise seek to commercialize ourselves. We also may have to reduce marketing, customer support or other resources devoted to our product candidates or cease operations. Any of these factors could harm our operating results.

Negative reports issued by securities analysts, and the election by securities analysts not to cover us, may have a negative impact on the market price of our common stock.

The trading market for our common stock may be affected in part by the research and reports that industry or financial analysts publish about us or our business, and our failure to achieve analyst earnings estimates. It may be difficult for companies such as ours, with smaller market capitalizations, to attract securities analysts that will cover our common stock. The lack of research coverage may adversely affect the market price of our common stock. If one or more of the analysts who elects to cover us downgrades our stock, our stock price may decline rapidly. If one or more of these analysts ceases coverage of our company, we could lose visibility in the market, which in turn may cause our stock price to decline.

We do not anticipate paying any cash dividends on our capital stock in the foreseeable future.

We have never declared or paid cash dividends on our capital stock. We currently intend to retain all of our future earnings, if any, to finance the growth and development of our business. Any future debt agreements may also preclude us from paying dividends. As a result, capital appreciation, if any, of our common stock will be your sole source of gain for the foreseeable future.

Provisions in our certificate of incorporation and bylaws and Delaware law may delay or prevent acquisition of our Company, which could adversely affect the value of our common stock.

Provisions contained in our certificate of incorporation and bylaws, as well as provisions of the Delaware General Corporation Law, could delay or make it more difficult to remove incumbent directors or for a third party to acquire us, even if a takeover would benefit our stockholders. For example, our board of directors may fill any vacancy on the board of directors, whether such vacancy occurs as a result of an increase in the number of directors or otherwise. Stockholders may only take action by written consent if acting unanimously. Special meetings of the stockholders may be called only by the President, a Vice President, our board of directors or the holders of not less than one-tenth of all the shares entitled to vote at the meeting. Additionally, our board of directors has the authority to cause us to issue, without any further vote or action by the stockholders, up to 5.0 million shares of preferred stock, par value $0.001 per share, in one or more series, to fix the number of shares constituting such series and the designation of such series, the voting powers, if any, of the shares of such series, and the preferences and relative, participating, optional or other special rights, if any, and any qualifications, limitations or restrictions thereof, of the shares of such series. The issuance of shares of preferred stock may have the effect of delaying, deferring or preventing a change in control of our company without further action by the stockholders, even where stockholders are offered a premium for their shares. Moreover, we are subject the provisions of Section 203 of the General Corporation Law of the State of Delaware, which prohibits a person who owns in excess of 15% of our outstanding voting stock from merging or combining with us for a period of three years after the date of the transaction in which the person acquired in excess of 15% of our outstanding voting stock, unless the merger or combination is approved in a prescribed manner.


36



Item 1B. Unresolved Staff Comments

Not applicable.

Item 2. Properties

Our headquarters is located in Tucson, Arizona and we have another office in Barcelona, Spain. As of December 2015 and 2014, we leased approximately 52,497 and 27,404 square feet of office, laboratory and manufacturing space, respectively. For the years ended December 31, 2015 and 2014 monthly rent and utilities averaged approximately $57,000 and $24,000 per month, respectively. The leases have a remaining term through 2018. See Item 8, Note 14, Commitments for additional details regarding the leases.

Item 3. Legal Proceedings

On March 19, 2015, a putative securities class action lawsuit was filed against Lawrence Mehren, and Steve Reichling, Rapp v. Accelerate Diagnostics, Inc., et al., U.S. District Court, District of Arizona, 2:2015-cv-00504. The complaint alleges that we violated Sections 10(b) and 20(a) of the Securities Exchange Act of 1934, and SEC Rule 10b-5, by making false or misleading statements about our ID/AST System, formerly called the BACcel System. Plaintiff purports to bring the action on behalf of a class of persons who purchased or otherwise acquired our stock between March 7, 2014 and February 17, 2015. On June 9, 2015, Julia Chang was appointed Lead Plaintiff of the purported class. On June 23, 2015, Plaintiff filed an amended complaint alleging violations of Sections 10(b) and 20(a) of the Securities Exchange Act of 1934 and Rule 10b- 5, by making false or misleading statements or omissions about our ID/AST System and by allegedly employing schemes to defraud. Plaintiff seeks certification of the action as a class action, compensatory damages for the class in an unspecified amount, legal fees and costs, and such other relief as the court may order. Defendants moved to dismiss the amended complaint on July 21, 2015, which motion was pending before the Court as of December 31, 2015. Subsequently, the Court granted the motion and dismissed the case with prejudice on January 28, 2016. On February 26, 2016, plaintiff filed a notice of appeal with the United States Court of Appeals for the Ninth Circuit. Plaintiff challenges the dismissal of the amended complaint. Plaintiff’s opening brief, if she does not seek additional time, is due June 6, 2016. See Item 8, Note 16, Subsequent Events for an update on this lawsuit.

Item 4. Mine Safety Disclosures

Not applicable.

PART II
Item 5. Market for Registrant's Common Equity, Related Stockholder Matters and Issue Purchases of Equity Securities

Market Information

The information in the following table sets forth the quarterly high and low sales price per share of our Common Stock, as reported by the NASDAQ Capital market, for the period from January 1, 2014 through December 31, 2015.

37




Common Stock Closing Price
Quarter Ended
High
Low
March 31, 2014
$21.95
$11.01
June 30, 2014
31.86
16.53
September 30, 2014
27.21
15.37
December 31, 2014
30.49
17.00
March 31, 2015
26.66
16.50
June 30, 2015
28.97
21.29
September 30, 2015
31.29
14.77
December 31, 2015
23.80
15.45

Performance Graph

The following Performance Graph compares the cumulative 5-year total stockholder return on our common stock relative to the cumulative total returns of the NASDAQ Composite index (XCMP) and the NASDAQ Biotechnology index (XNBI). An investment of $100 (with reinvestment of all dividends) is assumed to have been made in our common stock and in each of the indexes on December 31, 2010 and its relative performance is tracked through December 31, 2015. The Performance Graph and related information shall not be deemed to be “soliciting material” or to be “filed” with the Securities and Exchange Commission, nor shall such information be incorporated by reference into any filing under the Securities Act of 1933 or Securities Exchange Act of 1934, each as amended, except to the extent that we specifically incorporate it by reference into such filing.



38



 
Dec-10
Dec-11
Dec-12
Dec-13
Dec-14
Dec-15
Accelerate Diagnostics, Inc.
100.00
122.22
407.07
1,232.32
1,938.38
2,170.71
NASDAQ Composite
100.00
99.07
116.36
163.03
187.07
200.10
NASDAQ Biotechnology
100.00
112.08
148.27
246.09
330.75
369.67

* $100 invested on 12/31/2010 in stock or index, including reinvestment of dividends.

Holders

As of March 8, 2016 we had approximately 140 record owners of our Common Stock.


39




Dividends Paid and Dividend Policy

Holders of Common Stock are entitled to receive dividends as may be declared by the Board of Directors out of funds legally available. To date, no dividends have been declared by the Board of Directors. We currently intend to retain all available funds and any future earnings for use in the operation of our business and do not anticipate paying any cash dividends on our Common Stock for the foreseeable future.

Future cash dividends, if any, will be at the discretion of our Board of Directors and will depend upon our future operations and earnings, capital requirements and surplus, general financial condition, contractual restrictions and other factors as our Board of Directors may deem relevant. We do not intend to pay any cash dividends on our Common Stock in the foreseeable future.

Purchases of Equity Securities by the Issuer and Affiliated Purchasers

None.

Equity Compensation Plan Information

The table set forth below presents the securities authorized for issuance with respect to compensation plans under which equity securities are authorized for issuance as of December 31, 2015:

Equity Compensation Plan
Plan category
Number of securities to be issued upon exercise of outstanding options, restricted stock,
warrants and rights
Weighted average exercise price of available outstanding options, restricted stock, warrants and rights
Number of securities remaining for future issuance under equity compensation plans (excluding securities reflected in the 1st column)
Equity compensation plans approved by security holders
6,207,420

$
6.87

2,945,459

Equity compensation plans not approved by security holders



Total
6,207,420

$
6.87

2,945,459


Item 6. Selected Financial Data

The following selected consolidated financial data has been derived from our audited consolidated financial statements. The information below is not necessarily indicative of the results of future operations, and should be read in conjunction with Item 7, Management's Discussion and Analysis of Financial Condition and Results of Operations and the consolidated financial statements and related notes thereto included in Item 8, Financial Statements and Supplementary Data in order to fully understand factors that may affect the comparability of the information presented below.


40



Selected Consolidated Financial Data
(in thousands except per share data)

 
 
 
 
12 months
 
 
 
12 months
12 months
12 months
12/31/2012
5 months
12 months
 
12/31/2015
12/31/2014
12/31/2013
(unaudited)
12/31/2012
7/31/2012
Operating revenues
$
147

$
122

$
48

$
52

$
18

$
236

Net loss
(45,498
)
(30,933
)
(15,282
)
(8,124
)
(3,400
)
(5,311
)
Basic and diluted loss per share (1)
(1.01
)
(0.71
)
(0.41
)
(0.44
)
(0.13
)
(0.43
)
Cash dividends







 
 
12/31/2015
12/31/2014
12/31/2013
12/31/2012
12/31/2012
7/31/2012
Total assets
$
139,324

$
69,801

$
43,431

$
13,316

$
13,616

$
17,214

Long-term obligations

13




986


 (1)  Loss per share has been adjusted for the effects of the rights offering (see Item 8, Note 10, Rights Offering).

Item 7. Management's Discussion and Analysis of Financial Condition and Results of Operations

The following Management’s Discussion and Analysis of Financial Condition and Results of Operations (“MD&A”) summarizes our change in fiscal year, recent developments, the significant factors affecting our results of operations, capital resources and liquidity, off-balance sheet arrangements, contractual obligations, as well as discusses recent accounting pronouncements and our critical accounting policies and estimates. You should read the following discussion and analysis together with our financial statements, including the related notes, which are included in this Annual Report on Form 10-K. Certain information contained in the discussion and analysis set forth below and elsewhere in this report, including information with respect to our plans and strategy for our business and related financing, includes forward-looking statements that involve risks and uncertainties. See “Risk Factors” in Item 1A of this Annual Report on Form 10-K for a discussion of important factors that could cause actual results to differ materially from the results described in or implied by the forward-looking statements in this report.


41



Change in Fiscal Year

Effective December 31, 2012, we changed our fiscal year end from July 31 to December 31.

Recent Developments

In December, 2015, the Company finalized an underwritten public offering which resulted in gross proceeds of $109.3 million before costs associated with the transactions, which totaled $5.9 million. The proceeds will be used for general corporate purposes. Further details regarding this are included in Item 8, Note 9, Public Offering.

In April, 2014, the Company finalized a rights offering which resulted in gross proceeds of $45.0 million before costs associated with the transactions, which totaled $125,000. The proceeds will be used to fund continued operations, clinical trials, and product commercialization efforts. Further details regarding this rights offering are included in Item 8, Note 10, Rights Offering.

Changes in Results of Operations: Comparison of fiscal years ended December 31, 2015, December 31, 2014 and December 31, 2013

During the year ended December 31, 2015, total revenues were $147,000 as compared to $122,000 during the year ended December 31, 2014, an increase of $25,000 or 20%. The increase was due to sales of Research Use Only Accelerate ID/AST systems in 2015 which more than offsets declining royalty revenue on the legacy OptiChem product line.

During the year ended December 31, 2014, total revenues were $122,000 as compared to $48,000 during the year ended December 31, 2013, an increase of $74,000 or 154%. The increase was due to deferred royalties recognized in 2014.

Research and development expenses for the year ended December 31, 2015 were $26,022,000 as compared to $19,526,000 during the year ended December 31, 2014, an increase of $6,496,000 or 33%. The increase was primarily the result of increasing employee headcount, pilot clinical trial fees, and increased purchases of laboratory and instrument engineering supplies to support research and development as well as pre-launch efforts. Research and development expenses include non-cash equity-based compensation which decreased $1,855,000. We do not capitalize our internally developed instruments prior to FDA approval in accordance with U.S. GAAP and, therefore, research and development expenses include instruments manufactured for sales, internal research and development, and trial or study use as expense which totaled $2,667,000 and $0 for years ended December 31, 2015 and December 31, 2014, respectively.

Research and development expenses for the year ended December 31, 2014 were $19,526,000 as compared to $10,673,000 during the year ended December 31, 2013, an increase of $8,853,000 or 83%. The increase was primarily the result of increasing employee headcount, and increased purchases of laboratory and instrument engineering supplies to support research and development as well as pre-launch efforts. Research and development expenses include non-cash equity-based compensation which increased $2,679,000.

During the year ended December 31, 2015, sales, general and administrative expenses were $17,882,000 as compared to $10,695,000 during the year ended December 31, 2014, an increase of $7,187,000 or 67%. The increase was primarily driven by salaries and related expenses as we ramp up our operations. Sales, general and administrative expenses include non-cash equity-based compensation which increased $619,000. We do not capitalize our internally developed instruments prior to FDA approval in accordance with U.S. GAAP and, therefore, sales, general and administrative expenses include demonstration instruments as expense totaling $804,000 and $0 for years ended December 31, 2015 and December 31, 2014, respectively.

During the year ended December 31, 2014, sales, general and administrative expenses were $10,695,000 as compared to $4,312,000 during the year ended December 31, 2013, an increase of $6,383,000 or 148%. The increase was primarily driven by salaries and related expenses as we ramp up our operations. Sales, general and administrative expenses include non-cash equity-based compensation which increased $3,117,000.

During the year ended December 31, 2015, amortization was $10,000 as compared to $71,000 during the year ended December 31, 2014, a decrease of $61,000 or 86%. This decrease is the result of patents that became

42



fully amortized during the year.

During the year ended December 31, 2014, amortization was $71,000 as compared to $77,000 during the year ended December 31, 2013, a decrease of $6,000 or 8%. This decrease is the result of patents that became fully amortized during the year.

Depreciation for the year ended December 31, 2015 was $1,782,000 as compared to $817,000 during the year ended December 31, 2014, an increase of $965,000 or 118%. The increased depreciation was the result of purchases of equipment to support the Company’s Tucson facility laboratory, manufacturing and administrative space.
Depreciation for the year ended December 31, 2014 was $817,000 as compared to $286,000 during the year ended December 31, 2013, an increase of $531,000 or 186%. The increased depreciation was the result of purchases of equipment for the Company’s new Tucson facility laboratory, manufacturing and administrative space.

No impairment of intangibles was incurred for the year ended December 31, 2015 compared to $3,000 for the year ended December 31, 2014. Management routinely reviews intangible assets.

Impairment of intangibles for the year ended December 31, 2014 was $3,000 compared to $11,000 for the year ended December 31, 2013, a decrease of $8,000 or 73%. Management routinely reviews intangible assets. As a result, certain capitalized intellectual property amounts carried on our balance sheet were determined to be no longer recoverable and we abandoned our plan to pursue marketability resulting in the impairment charge.

As a result of the above factors, loss from operations for the year ended December 31, 2015 was $45,549,000 as compared to the loss of $30,990,000 during the year ended December 31, 2014, an increase in loss from operations of $14,559,000 or 47% which includes a decrease of $1,236,000 in non-cash equity-based compensation expenses. This loss and further losses are anticipated and was the result of our continued investments in research and development, expanded laboratory and operational space, increased employee headcount and other factors as we develop and prepare to commercialize the Company’s products.

As a result of the above factors, loss from operations for the year ended December 31, 2014 was $30,990,000 as compared to the loss of $15,311,000 during the year ended December 31, 2013, an increase in loss from operations of $15,679,000 or 102% which includes an increase of $5,796,000 in non-cash equity-based compensation expenses. This loss and further losses are anticipated and was the result of our continued investments in research and development, expanded laboratory and operational space, increased employee headcount and other factors as we develop and prepare to commercialize the Company’s products.

Other non-operating income during the year ended December 31, 2015 was $51,000 as compared to $57,000 during the year ended December 31, 2014, a decrease of $6,000 or 11%. This change was due to increased interest expense.

Other non-operating income during the year ended December 31, 2014 was $57,000 as compared to $29,000 during the year ended December 31, 2013, an increase of $28,000 or 97%. This change was due to increased interest and dividend income on our cash balances and investments, which increased year-over-year.

As a result of these factors, net loss for the year ended December 31, 2015 was $45,498,000 as compared to a net loss of $30,933,000 during the year ended December 31, 2014, an increase in net loss of $14,565,000 or 47%.

As a result of these factors, net loss for the year ended December 31, 2014 was $30,933,000 as compared to a net loss of $15,282,000 during the year ended December 31, 2013, an increase in net loss of $15,651,000 or 102%.

Unrealized loss on available-for-sale investments for the year ended December 31, 2015 was $20,000 as compared to a loss of $15,000 during the year ended December 31, 2014. The resulting comprehensive losses were $45,517,000 and $30,948,000 for the years ended December 31, 2015 and December 31, 2014, respectively.

Unrealized loss on available-for-sale investments for the year ended December 31, 2014 was $15,000 as compared to a gain of $22,000 during the year ended December 31, 2013. The resulting comprehensive losses were $30,948,000 and $15,260,000 for the years ended December 31, 2014 and December 31, 2013, respectively.


43



Capital Resources and Liquidity

Our primary source of liquidity has been from sales of shares of common stock. As of December 31, 2015, the Company had $132.4 million in cash and cash equivalents and available-for-sale securities, an increase of $65.7 million from $66.7 million at December 31, 2014. The primary reason for the change in these assets was the Company’s successful completion of the underwritten public offering in December, 2015 which resulted in net proceeds of $103.4 million. Further information regarding this is described in Item 8, Note 9, Public Offering.

The Company is subject to a Lease Agreement with Pima County of Arizona. The future minimum lease payments under the Lease Agreement are included in Item 8, Note 14, Commitments.

As of December 31, 2015, management believes that current cash balances will be more than sufficient to fund our capital and liquidity needs for the next twelve months.

The following summarizes selected items in the Company’s consolidated statements of cash flows for years ended December 31, 2015 and December 31, 2014 (in thousands):

Cash Flow Summary
(in thousands)
 
12/31/2015
12/31/2014
Net cash used in operating activities
$
(35,126
)
$
(18,785
)
Net cash used in investing activities
(2,675
)
(3,372
)
Net cash provided by financing activities
104,823

45,691

 
Our primary use of capital has been for the continued development and investment in commercialization readiness of the Accelerate ID/AST system. We believe our capital requirements will continue to be met with our existing cash balance and those provided under grants, exercises of warrants and stock options and/or, additional issuance of equity or debt securities. However, if capital requirements vary materially from those currently planned, we may require additional capital sooner than expected. There can be no assurance that such capital will be available in sufficient amounts or on terms acceptable to us, if at all. Additional issuances of equity or convertible debt securities will result in dilution to our current common stockholders.

Off-Balance Sheet Arrangements
We did not have any off-balance sheet arrangements as of December 31, 2015.

Contractual Obligations

The Company has certain contractual obligations and commercial commitments as disclosed in Item 8, Note 14, Commitments that do not meet the definition of long term debt obligations, capital leases, operating leases or purchase obligations. The Company has entered into Lease Agreements as described in Item 2. Properties and Item 8, Note 14, Commitments. The operating and capital lease obligations associated with Lease Agreements over the next five years are (in thousands):

Contractual Obligations
(in thousands)

 
Total
2016
2017
2018
2019
2020
Operating Lease Obligations
$
1,129

$
954

$
171

$
4

$

$

Capital Lease Obligations
13

13





Total
$
1,142

$
967

$
171

$
4

$

$


Recent Accounting Pronouncements

In February 2016, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update (“ASU”) 2016-02, Leases. This replaces the existing standards relating to leases for both lessees and lessors. For

44



lessees, the new standard requires most leases to be recorded on the balance sheet with expenses recognized much like the existing standard. For lessors, the new standard modifies the classification criteria and accounting for sales-type and direct financing leases and eliminates leveraged leases. For both lessees and lessors, the standard eliminates real estate-specific provisions, changes some of the presentation and disclosure requirements, and changes sale and leaseback criteria. The ASU is required for us on January 1, 2019 with early adoption permitted. We are currently assessing the impact this will have on our consolidated financial statements.

In January, 2016, the FASB issued ASU 2016-01, Financial Instruments - Overall. This standard requires equity investments, with some exceptions, be measured at fair value with valuation changes recognized in net income, simplifies the impairment assessment of some equity investments, eliminates the requirement to disclose the methods and significant assumptions used to estimate the fair value for financial instruments measured at amortized cost, requires the use of the exit price notion when measuring the fair value of financial instruments, requires separate presentation of some changes in other comprehensive income, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial assets, and clarifies the need for a valuation allowance on some deferred tax assets. The ASU is required for us on January 1, 2018. We do not expect the adoption of ASU 2016-01 to have a significant impact on our consolidated financial statements.

In November 2015, the FASB issued ASU 2015-17, Income Taxes-Balance Sheet Classification of Deferred Taxes. The new standard requires that deferred income tax liabilities and assets be classified as noncurrent in a classified statement of financial position rather than separating these amounts between current and noncurrent amounts. The deferred tax liabilities and assets continue to be offset and presented as a single amount. The ASU is required for us on January 1, 2017 and we have elected to adopt this standard retrospectively for the period ended December 31, 2015. There was no significant impact on our consolidated financial statements as a result of adopting this ASU.

In July 2015, the FASB issued ASU 2015-11, Simplifying the Measurement of Inventory. The new standard requires entities that measure inventory using first-in, first-out or average cost inventory to report inventory at the lower of cost and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The ASU will become effective for us on January 1, 2016 but will not have an impact on our financial statements as we do not capitalize the cost of pre-launch inventory. We do not expect the adoption of ASU 2015-11 to have a significant impact on our consolidated financial statements.

In April 2015, the FASB issued ASU 2015-05, Intangibles-Goodwill and Other - Internal-Use Software; Customer’s Accounting for Fees Paid in a Cloud Computing Arrangement. Prior to this ASU, U.S. GAAP did not include explicit guidance about a customer’s accounting for fees paid in a cloud computing arrangement. Examples of cloud computing arrangements include software as a service, platform as a service, infrastructure as a service, and other similar hosting arrangements. This ASU provides guidance to customers about whether a cloud computing arrangement includes a software license, in which case the customer should account for such license consistent with the acquisitions of other software licenses. If the cloud computing arrangement does not include a software license, the customer should account for the arrangement as a service contract. The ASU does not change the accounting for service contracts. The new standard is effective for us on January 1, 2016 with early adoption permitted. We do not expect the adoption of ASU 2015-05 to have a significant impact on our consolidated financial statements.

In January 2015, the FASB issued ASU 2015-01, Income Statement - Extraordinary and Unusual Items. The new standard eliminates from U.S. GAAP the concept of extraordinary items. Prior to the adoption of this standard, extraordinary items have been segregated from the results of ordinary operations and shown separately in the income statement, net of tax, after income from continuing operations. The new standard eliminates such segregation as well as the requirements to disclose applicable income taxes and either present or disclose earnings-per-share data applicable to the extraordinary item. The new standard is effective for us on January 1, 2016 with early adoption permitted. We do not expect the adoption of ASU 2015-01 to have a significant impact on our consolidated financial statements.

In August 2014, the FASB issued ASU 2014-15, Presentation of Financial Statements - Going Concern. The new standard requires management of public and private companies to evaluate whether there is substantial doubt about the entity’s ability to continue as a going concern and, if so, disclose that fact. Management will also be required to evaluate and disclose whether its plans alleviate that doubt. The new standard is effective for us on January 1, 2016 with early adoption permitted. We do not expect the adoption of ASU 2014-15 to have a significant impact on our consolidated financial statements.

45




In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers, which will supersede nearly all existing revenue recognition guidance under U.S. GAAP. The standard’s core principle is that a company will recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. We are carefully evaluating our existing revenue recognition practices to determine whether any contracts in the scope of the guidance will be affected by the new requirements. The effects may include identifying performance obligations in existing arrangements, determining the transaction price and allocating the transaction price to each separate performance obligation. We will also establish practices to determine when a performance obligation has been satisfied, and recognize revenue in accordance with the new requirements. In August 2015, the FASB issued ASU 2015-14, Revenue from Contracts with Customers Deferral of the Effective Date, which deferred the effective date resulting in a new effective date of January 1, 2018 for us. We are permitted to adopt early but not before the original effective date of January 1, 2017. The standard allows for either “full retrospective” adoption, meaning the standard is applied to all of the periods presented, or “modified retrospective” adoption, meaning the standard is applied only to the most current period presented in the financial statements. We are currently evaluating the transition method and the adoption date that will be elected.

Critical Accounting Policies and Estimates

We consider our accounting policies related to deferred taxes, equity-based compensation and inventory to be critical accounting policies. A number of significant estimates, assumptions, and judgments are inherent in our calculations which are based on historical experience and on various other assumptions that we believe to be reasonable under the circumstances. Actual results could differ materially from these estimates.

Deferred Taxes

We recognize deferred tax assets and liabilities based on the differences between the financial statement carrying amounts and the tax bases of assets and liabilities. We regularly review our deferred tax assets for recoverability and establish a valuation allowance based on historical taxable income, projected future taxable income, and the expected timing of the reversals of existing temporary differences. As of December 31, 2015 and 2014, we have established a valuation allowance equal to our net deferred tax asset, as we have not been able to determine that we will generate sufficient future taxable income to allow us to realize the deferred tax assets prior to their limitations or expirations. See Item 8, Note 13, Income Taxes for additional information.

Equity-Based Compensation

We account for equity-based compensation in accordance with FASB ASC 718. Equity-based compensation is measured at the grant date based on the estimated fair value of the award and is recognized over the requisite service period.

In determining the fair value of the award, we use the Black-Scholes option pricing model. This model requires the input of subjective assumptions which are further discussed in Item 8, Note 2, Summary of Significant Accounting Policies and Item 8, Note 12, Employee and Consultant Equity-Based Compensation. Once estimated, the Black-Scholes assumptions remain fixed throughout the requisite service period for employee grants. For unvested consultant grants, the assumptions are updated at the end of each reporting period until the grant is vested. Changes in the inputs can materially affect the estimate of the fair value.

Employees who terminate employment prior to the requisite service period forfeit their unvested options and we derecognize the fair value of these shares. In accordance with FASB ASC 718, we estimate the amount of such forfeitures. Our estimate is based on the forfeiture rate of unvested awards in the previous twelve-month period. The rate is calculated separately for awards to the board of directors/executives and all other awards. The rate is adjusted at the end of each period and any change is recognized through a cumulative catch-up adjustment. Rate changes will also impact the amount of equity-based compensation expense to be recognized in future periods. Due to our relatively small employee base this estimate is particularly sensitive to termination activity and any change in this assumption can materially affect the estimate of fair value of equity-based compensation.

Inventory


46



The Company currently purchases and produces inventory prior to U.S. Food and Drug Administration (“FDA”) or other regulatory agency approval. We do not believe probable future economic benefit can be asserted prior to the completion of 510(k) clearance. Accordingly, the Company does not capitalize pre-launch inventory prior to the receipt of 510(k) clearance, unless the regulatory review process has progressed to a point that objective and persuasive evidence of regulatory approval is sufficiently probable, and future economic benefit can be asserted. Inventory is reported as research and development costs, or if used in marketing evaluations reported to sales, general and administrative costs on the Statement of Operations and Comprehensive Loss.


Item 7A. Quantitative and Qualitative Disclosures

Interest Rate Risk

The Company’s interest income is sensitive to fluctuations in the general level of U.S. interest rates. As such, changes in U.S. interest rates affect the interest earned on the Company’s cash and cash equivalents and investments.

Our exposure to market risk is limited to our cash and cash equivalents, all of which have original maturities of less than three months and available-for-sale investments some of which have maturities under a year and some of which have maturities of more than a year. The goals of our investment policy are preservation of capital, fulfillment of liquidity needs and fiduciary control of cash and investments. We also seek to maximize income from our investments without assuming significant risk. To achieve our goals, we maintain a portfolio of cash equivalents and investments in a variety of securities that management believes to be of high credit quality. We currently do not hedge interest rate exposure. Further information regarding our investments is included in Item 8, Note 4, Investments.

Item 8. Financial Statements and Supplementary Data

Financial Statements of Accelerate Diagnostics, Inc.

Report of Independent Registered Public Accounting Firm

Balance Sheets as of December 31, 2015 and 2014

Statements of Operations and Comprehensive Loss for the years ended December 31, 2015, 2014 and 2013

Statements of Stockholders’ Equity for the years ended December 31, 2015, 2014 and 2013

Statements of Cash Flow for the years ended December 31, 2015, 2014 and 2013

Notes to Financial Statements


47



Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Accelerate Diagnostics, Inc. and Subsidiaries

We have audited the accompanying consolidated balance sheets of Accelerate Diagnostics, Inc. and subsidiaries as of December 31, 2015 and 2014, and the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2015. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Accelerate Diagnostics, Inc. and subsidiaries at December 31, 2015 and 2014 and the consolidated results of their operations and their cash flows for each of the three years in the period ended December 31, 2015, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Accelerate Diagnostics, Inc.’s and subsidiaries' internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated March 9, 2016, expressed an unqualified opinion thereon.


/s/ Ernst & Young LLP


Phoenix, Arizona
March 9, 2016


48



Report of Independent Registered Public Accounting Firm

The Board of Directors and Stockholders of Accelerate Diagnostics, Inc. and Subsidiaries

We have audited Accelerate Diagnostics, Inc. and subsidiaries’ internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control — Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). Accelerate Diagnostics, Inc.’s and subsidiaries' management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Accelerate Diagnostics, Inc. and subsidiaries maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheet of Accelerate Diagnostics, Inc. and subsidiaries as of December 31, 2015 and 2014 and the related consolidated statements of operations and comprehensive loss, stockholders’ equity, and cash flows for each of the three years in the period ended December 31, 2015 of Accelerate Diagnostics, Inc. and subsidiaries and our report dated March 9, 2016, expressed an unqualified opinion thereon.


/s/    Ernst & Young LLP

Phoenix, Arizona
March 9, 2016


49



ACCELERATE DIAGNOSTICS, INC.
CONSOLIDATED
BALANCE SHEETS
(in thousands, except per share data)
 
12/31/2015
12/31/2014
ASSETS
Current assets:
 

 

Cash and cash equivalents
$
120,585

$
53,563

Investments
11,839

13,115

Trade accounts receivable
77

78

Prepaid expenses
1,638

342

Other current assets
12


Total current assets
134,151

67,098

Property and equipment, net
5,016

2,536

Intellectual property, net
157

167

Total assets
$
139,324

$
69,801

 
 
 
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
 

 

Accounts payable
$
2,623

$
2,129

Accrued liabilities
2,543

494

Deferred revenue and income
127

13

Capital lease obligations
13

147

Total current liabilities
5,306

2,783

Long-term deferred income
1,000

1,014

Long-term capital lease obligation

13

Total liabilities
6,306

3,810

 
 
 
Commitments and contingencies see Note 14, Commitments


 
 
 
Stockholders' equity:
 

 

Common stock, $0.001 par value;
 

 

55,000,000 common shares authorized 51,191,184 (as of December 31, 2015) and 44,639,829 (as of December 31, 2014) shares issued and outstanding
51

45

5,000,000 preferred shares authorized and none outstanding as of December 31, 2015 and December 31, 2014


Contributed capital
243,894

131,356

Accumulated deficit
(110,915
)
(65,417
)
Accumulated other comprehensive income (loss)
(12
)
7

Total stockholders' equity
133,018

65,991

Total liabilities and stockholders' equity
$
139,324

$
69,801

See accompanying notes to financial statements.


50



ACCELERATE DIAGNOSTICS, INC.
CONSOLIDATED
STATEMENTS OF OPERATIONS AND COMPREHENSIVE LOSS
(in thousands, except per share data)
 
Years Ended December 31,
 
2015
2014
2013
Revenues:
 

 

 

Licensing and royalty revenues
$
71

$
122

$
48

Product sales
76



Total revenues
147

122

48

 
 
 
 
Costs and expenses:
 

 

 

Research and development
26,022

19,526

10,673

Sales, general and administrative
17,882

10,695

4,312

Amortization
10

71

77

Depreciation
1,782

817

286

Impairment of intangibles

3

11

Total costs and expenses
45,696

31,112

15,359

 
 
 
 
Loss from operations
(45,549
)
(30,990
)
(15,311
)
 
 
 
 
Interest expense and other
(23
)
(7
)

Interest and dividend income
74

64

29

Total other income
51

57

29

 
 
 
 
Net loss
$
(45,498
)
$
(30,933
)
$
(15,282
)
 
 
 
 
Basic and diluted net loss per share
$
(1.01
)
$
(0.71
)
$
(0.41
)
Weighted average shares outstanding
44,998

43,626

37,599

 
 
 
 
Other comprehensive loss:
 

 

 

Net loss
$
(45,498
)
$
(30,933
)
$
(15,282
)
Net unrealized (loss) gain on available-for-sale investments
(20
)
(15
)
22

Foreign currency translation adjustment
1



Comprehensive loss
$
(45,517
)
$
(30,948
)
$
(15,260
)

See accompanying notes to financial statements.


51



ACCELERATE DIAGNOSTICS, INC.
CONSOLIDATED
STATEMENTS OF STOCKHOLDERS’ EQUITY
(in thousands)
 
Shares
Common
Stock
Amount
Contributed
Capital
Accumulated Deficit
Accumulated
Other
Comprehensive Income (Loss)
Total
Stockholders’
Equity
Balances, December 31, 2012
25,332

$
25

$
31,245

$
(19,202
)
$

$
12,068

Net loss



(15,282
)

(15,282
)
Issuance of common stock and warrants
2,488

3

19,909



19,912

Exercise of options and warrants
13,830

14

20,955



20,969

Unrealized gain on available-for-sale securities




22

22

Equity-based compensation


3,828



3,828

Balances, December 31, 2013
41,650

42

75,937

(34,484
)
22

41,517

Net loss



(30,933
)

(30,933
)
Issuance of common stock
2,678

3

44,872



44,875

Exercise of options
312


923



923

Unrealized loss on available-for-sale securities




(15
)
(15
)
Equity-based compensation


9,624



9,624

Balances, December 31, 2014
44,640

45

131,356

(65,417
)
7

65,991

Net loss

 
 
(45,498
)

(45,498
)
Issuance of common stock
6,426

6

103,345



103,351

Exercise of options
125


805



805

Unrealized loss on available-for-sale securities




(20
)
(20
)
Foreign currency translation adjustment




1

1

Equity-based compensation


8,388



8,388

Balances, December 31, 2015
51,191

$
51

$
243,894

$
(110,915
)
$
(12
)
$
133,018


See accompanying notes to financial statements.


52



ACCELERATE DIAGNOSTICS, INC.
CONSOLIDATED
STATEMENT OF CASH FLOWS
(in thousands)
 
Years Ended December 31,
 
2015
2014
2013
Cash flows from operating activities:
 
 
 

Net loss
$
(45,498
)
$
(30,933
)
$
(15,282
)
Adjustments to reconcile net loss to net cash used in operating activities:
 

 

 

Depreciation
1,782

817

286

Amortization of intangible assets
10

71

77

Amortization of investment discount
188

269

76

Equity-based compensation
8,388

9,624

3,828

Impairment loss

3

11

(Increase) decrease in assets:
 

 

 

Accounts receivable
1

(54
)
739

Prepaid expense and other
(1,241
)
(166
)
(114
)
Other current assets
(12
)


Increase (decrease) in liabilities:
 

 

 

Accounts payable
329

1,336

205

Accrued liabilities
827

80

(356
)
Deferred revenue and income
100

168

781

Net cash used in operating activities
(35,126
)
(18,785
)
(9,749
)
Cash flows from investing activities:
 
 
 
Purchases of equipment
(3,656
)
(1,933
)
(1,158
)
Purchase of available-for-sale securities
(12,418
)
(7,657
)
(12,014
)
Sales of available-for-sale securities
141

861


Maturity of available-for-sale securities
13,258

5,357


Net cash used in investing activities
(2,675
)
(3,372
)
(13,172
)
Cash flows from financing activities:
 
 
 
Exercise of warrants and options
805

923

20,969

Issuance of common stock and warrants
104,165

44,875

19,912

Payments on capital lease obligations
(147
)
(107
)

Net cash provided by financing activities
104,823

45,691

40,881

Increase in cash and cash equivalents
67,022

23,534

17,960

Cash and cash equivalents, beginning of period
53,563

30,029

12,069

Cash and cash equivalents, end of period
$
120,585

$
53,563

$
30,029


See accompanying notes to financial statements.


53



ACCELERATE DIAGNOSTICS, INC.
NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

NOTE 1. ORGANIZATION AND NATURE OF BUSINESS; BASIS OF PRESENTATION; PRINCIPLES OF CONSOLIDATION

Accelerate Diagnostics, Inc. (“we” or “us” or “our” or “Accelerate” or “the Company”) is an in vitro diagnostics company dedicated to providing solutions which improve patient outcomes and lower healthcare costs through the rapid diagnosis of serious infections. Microbiology laboratories are in need of new tools to address what the U.S. Centers for Disease Control and Prevention (“CDC”) calls one of the most serious healthcare threats of our time, antibiotic resistance. A significant contributor to the rise of resistance is the overuse and misuse of antibiotics, which is exacerbated by a lack of timely diagnostic results.

Basis of Presentation

The accompanying consolidated financial statements have been prepared in accordance with U.S. generally accepted accounting principles, (“U.S. GAAP”), and applicable rules and regulations of the United States Securities and Exchange Commission (“SEC”), regarding annual financial reporting.

All amounts are rounded to the nearest thousand dollars unless otherwise indicated.

Principles of Consolidation

The consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries (including the newly formed Accelerate Diagnostics S.L.) after elimination of intercompany transactions and balances.

Reclassification

Certain prior year amounts have been reclassified for consistency with the current year presentation.

NOTE 2. SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Use of Estimates

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities as of the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

Concentration of Credit Risk

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash equivalents, short-term investments and accounts receivable, including receivables from major customers.

The Company’s main financial institution for banking operations held 100% and 83% of the Company’s cash and cash equivalents as of December 31, 2015 and December 31, 2014, respectively.

The Company grants credit to domestic and international clients in various industries. Exposure to losses on accounts receivable is principally dependent on each client's financial position. At December 31, 2015, 66% of the outstanding receivable balance was with Denver Health. See Note 6, License Agreements and Grants for more information.

Estimated Fair Value of Financial Instruments

The Company follows ASC Topic 820, Fair Value Measurements and Disclosures which has defined fair value and requires the Company to establish a framework for measuring fair value and disclose fair value measurements. The framework requires the valuation of assets and liabilities subject to fair value measurements using a three tiered approach and fair value measurement be classified and disclosed in one of the following three

54



categories:

Level 1: Unadjusted quoted prices in active markets that are accessible at the measurement date for identical, unrestricted assets or liabilities;

Level 2: Quoted prices for similar assets and liabilities in active markets, quoted prices in markets that are not active, or inputs that are observable, either directly or indirectly, for substantially the full term of the asset or liability;

Level 3: Prices or valuation techniques that require inputs that are both significant to the fair value measurement and unobservable (i.e. supported by little or no market activity).

The carrying amounts of financial instruments such as cash and cash equivalents, trade accounts receivable, prepaid expenses, accounts payable, accrued liabilities, and other current liabilities approximate the related fair values due to the short-term maturities of these instruments.

See Note 3, Fair Value of Financial Instruments for further information and related disclosures regarding the Company’s fair value measurements.

Cash and Cash Equivalents

All highly liquid investments with an original maturity of three months or less at time of purchase are considered to be cash equivalents. Cash and cash equivalents include overnight repurchase agreement accounts. As part of our cash management process, excess operating cash is invested in overnight repurchase agreements with our bank. Repurchase agreements are not deposits and are not insured by the U.S. Government, the FDIC or any other government agency and involve investment risk including possible loss of principal. We believe however, that the market risk arising from holding these financial instruments is minimal.

Investments

The Company invests excess funds in various short-term investments which are primarily held in the custody of a major financial institution. Investments consist of debt securities in U.S. government-sponsored entities, corporate debt securities and commercial paper. Management classifies its investments as available-for-sale investments and records these investments in the Balance Sheets at fair value. Unrealized gains or losses for available-for-sale securities are included in accumulated other comprehensive income or loss, a component of stockholders’ equity. The Company classifies its investments as current based on the nature of the investments and their availability for use in current operations.

The Company assesses whether an other-than-temporary impairment loss has occurred due to declines in fair value or other market conditions when an investment’s fair value remains less than its cost for more than twelve months. This assessment includes a determination of whether the investment is expected to recover in value and whether the Company has the intent and ability to hold the investment until the anticipated recovery in value occurs. When an investment is identified as having an other-than-temporary impairment loss, we adjust the cost basis of the investment down to fair value resulting in a realized loss. The new cost basis is not changed for subsequent recoveries in fair value and temporary future increases or decreases in fair value are included in other comprehensive income.

Property and Equipment

Property and equipment are recorded at cost. Maintenance and repairs are charged to expense as incurred and expenditures for major improvements are capitalized. Gains and losses from retirement or replacement are included in costs and expenses. Depreciation of property and equipment is computed using the straight-line method over the estimated useful life of the assets, ranging from one to seven years. Leasehold improvements are depreciated over the remaining life of the lease or the life of the asset, whichever is less. See Note 5, Property and Equipment below.

Long-lived Assets

Long-lived assets and certain identifiable intangibles to be held and used by the Company are reviewed

55



for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The Company continuously evaluates the recoverability of its long-lived assets based on estimated future cash flows from and the estimated fair value of such long-lived assets, and provides for impairment if such undiscounted cash flows or the estimated fair value are insufficient to recover the carrying amount of the long-lived asset.

Inventory

The Company currently purchases and produces inventory prior to U.S. Food and Drug Administration (“FDA”) or other regulatory agency approval. We do not believe probable future economic benefit can be asserted prior to the completion of 510(k) clearance. Accordingly, the Company does not capitalize pre-launch inventory prior to the receipt of 510(k) clearance, unless the regulatory review process has progressed to a point that objective and persuasive evidence of regulatory approval is sufficiently probable, and future economic benefit can be asserted. Inventory is reported as research and development costs, or if used in marketing evaluations reported to sales, general and administrative costs on the Statement of Operations and Comprehensive Loss.

Revenue Recognition

The Company recognizes revenue in accordance with ASC 605, “Revenue Recognition,” when persuasive evidence of an arrangement exists, the price is fixed or determinable, collection is reasonably assured and delivery of products has occurred or services have been rendered.

Additional considerations include whether the applicable fee arrangement contains future delivery or performance obligations that should be divided into separate accounting units, whether the arrangement requires the Company to retain risks consistent with a collaborative arrangement, and/or whether any of the fees are contingent on the achievement of future milestones.

Deferred revenue represents amounts received but not yet earned under existing agreements.

Accounts Receivable Allowances

Allowances on accounts receivable are recorded when circumstances indicate collection is doubtful for a particular accounts receivable. Receivables are written off if reasonable collection efforts prove unsuccessful. The Company provides for allowances on a specific account basis.

Leases

The Company accounts for leases in accordance with ASC 840, Leases, which requires leases to be classified as either operating or capital leases. In general, the Company classifies leases as capital leases when there is either a transfer of ownership at the end of the lease term, the lease contains a bargain purchase option, the lease term is seventy-five percent or more of the estimated economic life of the leased property or the minimum lease payments are ninety percent or more of the fair value at lease inception. Other leases are classified as operating leases.

Operating lease rent is recorded as an operating expense monthly. For capital leases, both an asset and liability are recorded at the inception of the lease based on the present value of lease payments. The asset is included with property and equipment on the Balance Sheet and amortization is recorded on a straight-line basis over the term of the lease with the amortization expense included with depreciation on the Statements of Operations and Comprehensive Loss. For the liability, the amount due within the next year is recorded as capital lease obligations and the amount due in more than a year is recorded as long-term capital lease obligation on the Balance Sheet. Interest expense is recorded based on the implicit or explicit interest rate used in the lease and is included as non-operating interest expense on the Statements of Operations and Comprehensive Loss.

Income Taxes

Deferred tax assets and liabilities are recorded for the estimated future tax effects of temporary differences between the tax basis of assets and liabilities and amounts reported in the accompanying balance sheets. The change in deferred tax assets and liabilities for the period represents the deferred tax provision or benefit for the period. Effects of changes in enacted tax laws in deferred tax assets and liabilities are reflected as an adjustment

56



to the tax provision or benefit in the period of enactment.

The Company follows the provisions of ASC 740, Income Taxes, to account for any uncertainty in income taxes with respect to the accounting for all tax positions taken (or expected to be taken) on any income tax return. This guidance applies to all open tax periods in all tax jurisdictions in which the Company is required to file an income tax return. Under U.S. GAAP, in order to recognize an uncertain tax benefit the taxpayer must be more likely than not of sustaining the position, and the measurement of the benefit is calculated as the largest amount that is more than 50% likely to be realized upon resolution of the benefit. Interest and penalties, if any, would be recorded as tax expense in general and administrative expenses.

Earnings Per Share

The Company follows ASC 260, Earnings Per Share, which requires companies to present basic earnings per share and diluted earnings per share. Basic earnings (loss) per share includes no dilution and is computed by dividing income (loss) available to common stockholders by the weighted average number of common shares outstanding for the period. Diluted earnings per share are computed similarly to basic earnings (loss) per share except the denominator includes additional common shares that would have been outstanding if warrants and share-based payments had been issued. Diluted earnings are not presented when the effect of adding such additional common shares is antidilutive.

Earnings per share are restated when certain transactions or events, including rights offerings determined to have bonus elements have occurred. See Note 11, Earnings Per Share for more information.

Equity-Based Compensation

The Company awards stock options and other equity-based instruments to its employees, directors and consultants. Compensation cost related to equity-based awards is based on the fair value of the instrument on the grant date, and is recognized over the requisite service period on a straight-line basis over the vesting period for each tranche (an accelerated attribution method). For unvested consultant grants, the assumptions are updated at the end of each reporting period until the grant is vested. The Company estimates the fair value of stock option awards, including modifications of stock option awards, using the Black-Scholes option pricing model. This model derives the fair value of stock options based on certain assumptions related to expected stock price volatility, expected option life, risk-free interest rate and dividend yield.

Volatility: The expected volatility is based on the historical volatility of the Company's stock price over the most recent period commensurate with the expected term of the stock option award.

Expected term: The estimated expected term for employee awards is based on the calculation published by the SEC in SAB110 for use when there is not a sufficient history of employee exercise patterns. For consultant awards, the estimated expected term is the same as the life of the award.

Risk-free interest rate: The risk-free interest rate is based on published U.S. Treasury rates for a term commensurate with the expected term.

Dividend yield: The dividend yield is estimated as zero as the Company has not paid dividends in the past and does not have any plans to pay any dividends in the future.

The Company estimates the forfeiture rate of unvested awards based on the forfeitures in the previous twelve-month period. The rate is calculated separately for awards to the board of directors/executives and all other awards. See Note 12, Employee and Consultant Equity-Based Compensation for further information.

Foreign Currency Translation and Foreign Currency Transactions

The Company follows ASC 830 Foreign Currency Matters, which provides guidance on foreign currency transactions and translation of financial statements. Adjustments resulting from translating foreign functional currency financial statements into U.S. Dollars are included in the foreign currency translation adjustment, a component of accumulated other comprehensive income (loss) in the consolidated statements of stockholder's equity.


57



The Company has assets and liabilities, primarily receivables and payables, which are denominated in currencies other than their functional currency. These balance sheet items are subject to re-measurement, the impact of which is recorded in interest expense and other, within the consolidated statement of operations and comprehensive loss.

Comprehensive Loss

The Company follows ASC 220, Reporting Comprehensive Income, which establishes standards for reporting and displaying comprehensive income (loss) and its components (revenues, expenses, gains and losses) in a full set of general-purpose financial statements. The Company holds investments classified as available-for-sale securities and records the change in fair market value as a component of comprehensive income (loss). The Company also has adjustments resulting from translating foreign functional currency financial statements into U.S. Dollars which is included as a component of comprehensive income (loss).

Recent Accounting Pronouncements

In February 2016, the Financial Accounting Standards Board ("FASB") issued Accounting Standards Update (“ASU”) 2016-02, Leases. This replaces the existing standards relating to leases for both lessees and lessors. For lessees, the new standard requires most leases to be recorded on the balance sheet with expenses recognized much like the existing standard. For lessors, the new standard modifies the classification criteria and accounting for sales-type and direct financing leases and eliminates leveraged leases. For both lessees and lessors, the standard eliminates real estate-specific provisions, changes some of the presentation and disclosure requirements, and changes sale and leaseback criteria. The ASU is required for us on January 1, 2019 with early adoption permitted. We are currently assessing the impact this will have on our consolidated financial statements.

In January, 2016, the FASB issued ASU 2016-01, Financial Instruments - Overall. This standard requires equity investments, with some exceptions, be measured at fair value with valuation changes recognized in net income, simplifies the impairment assessment of some equity investments, eliminates the requirement to disclose the methods and significant assumptions used to estimate the fair value for financial instruments measured at amortized cost, requires the use of the exit price notion when measuring the fair value of financial instruments, requires separate presentation of some changes in other comprehensive income, requires separate presentation of financial assets and financial liabilities by measurement category and form of financial assets, and clarifies the need for a valuation allowance on some deferred tax assets. The ASU is required for us on January 1, 2018. We do not expect the adoption of ASU 2016-01 to have a significant impact on our consolidated financial statements.

In November 2015, the FASB issued ASU 2015-17, Income Taxes-Balance Sheet Classification of Deferred Taxes. The new standard requires that deferred income tax liabilities and assets be classified as noncurrent in a classified statement of financial position rather than separating these amounts between current and noncurrent amounts. The deferred tax liabilities and assets continue to be offset and presented as a single amount. The ASU is required for us on January 1, 2017 and we have elected to adopt this standard retrospectively for the period ended December 31, 2015. There was no significant impact on our consolidated financial statements as a result of adopting this ASU.

In July 2015, the FASB issued ASU 2015-11, Simplifying the Measurement of Inventory. The new standard requires entities that measure inventory using first-in, first-out or average cost inventory to report inventory at the lower of cost and net realizable value. Net realizable value is the estimated selling price in the ordinary course of business, less reasonably predictable costs of completion, disposal, and transportation. The ASU will become effective for us on January 1, 2016. We do not expect the adoption of ASU 2015-11 to have a significant impact on our consolidated financial statements.

In April 2015, the FASB issued ASU 2015-05, Intangibles-Goodwill and Other - Internal-Use Software; Customer’s Accounting for Fees Paid in a Cloud Computing Arrangement. Prior to this ASU, U.S. GAAP did not include explicit guidance about a customer’s accounting for fees paid in a cloud computing arrangement. Examples of cloud computing arrangements include software as a service, platform as a service, infrastructure as a service, and other similar hosting arrangements. This ASU provides guidance to customers about whether a cloud computing arrangement includes a software license, in which case the customer should account for such license consistent with the acquisitions of other software licenses. If the cloud computing arrangement does not include a software license, the customer should account for the arrangement as a service contract. The ASU does not change the accounting for service contracts. The new standard is effective for us on January 1, 2016 with early adoption

58



permitted. We do not expect the adoption of ASU 2015-05 to have a significant impact on our consolidated financial statements.

In January 2015, the FASB issued ASU 2015-01, Income Statement - Extraordinary and Unusual Items. The new standard eliminates from U.S. GAAP the concept of extraordinary items. Prior to the adoption of this standard, extraordinary items have been segregated from the results of ordinary operations and shown separately in the income statement, net of tax, after income from continuing operations. The new standard eliminates such segregation as well as the requirements to disclose applicable income taxes and either present or disclose earnings-per-share data applicable to the extraordinary item. The new standard is effective for us on January 1, 2016 with early adoption permitted. We do not expect the adoption of ASU 2015-01 to have a significant impact on our consolidated financial statements.

In August 2014, the FASB issued ASU 2014-15, Presentation of Financial Statements - Going Concern. The new standard requires management of public and private companies to evaluate whether there is substantial doubt about the entity’s ability to continue as a going concern and, if so, disclose that fact. Management will also be required to evaluate and disclose whether its plans alleviate that doubt. The new standard is effective for us on January 1, 2016 with early adoption permitted. We do not expect the adoption of ASU 2014-15 to have a significant impact on our consolidated financial statements.

In May 2014, the FASB issued ASU 2014-09, Revenue from Contracts with Customers, which will supersede nearly all existing revenue recognition guidance under U.S. GAAP. The standard’s core principle is that a company will recognize revenue when it transfers promised goods or services to customers in an amount that reflects the consideration to which the company expects to be entitled in exchange for those goods or services. We are carefully evaluating our existing revenue recognition practices to determine whether any contracts in the scope of the guidance will be affected by the new requirements. The effects may include identifying performance obligations in existing arrangements, determining the transaction price and allocating the transaction price to each separate performance obligation. We will also establish practices to determine when a performance obligation has been satisfied, and recognize revenue in accordance with the new requirements. In August 2015, the FASB issued ASU 2015-14, Revenue from Contracts with Customers Deferral of the Effective Date, which deferred the effective date resulting in a new effective date of January 1, 2018 for us. We are permitted to adopt early but not before the original effective date of January 1, 2017. The standard allows for either “full retrospective” adoption, meaning the standard is applied to all of the periods presented, or “modified retrospective” adoption, meaning the standard is applied only to the most current period presented in the financial statements. We are currently evaluating the transition method and the adoption date that will be elected.


59



NOTE 3. FAIR VALUE OF FINANCIAL INSTRUMENTS

The following tables represent the financial instruments measured at fair value on a recurring basis on the financial statements of the Company and the valuation approach applied to each class of financial instruments at December 31, 2015 and 2014 (see Note 2, Summary of Significant Accounting Policies for further information):

 
December 31, 2015
 
(in thousands)
 
Quoted Prices
in Active
Markets for
Identical
Assets
(Level 1)
Significant
Other
Observable Inputs
(Level 2)
Significant
Unobservable
Inputs
(Level 3)
Total
Assets:
 

 

 

 

Money market funds (cash equivalents)
$
5,221

$

$

$
5,221

Corporate notes and bonds

9,332


9,332

Asset-backed securities

2,507


2,507

Total assets measured at fair value
$
5,221

11,839

$

$
17,060

 
 
December 31, 2014
 
(in thousands)
 
Quoted Prices
in Active
Markets for
Identical
Assets
(Level 1)  
Significant Other Observable Inputs
(Level 2)
Significant Unobservable Inputs
(Level 3)
Total
Assets:
 

 

 

 

Money market funds (cash equivalents)
$
13,127

$

$

$
13,127

Corporate notes and bonds

12,974


12,974

Asset-backed securities

141


141

Total assets measured at fair value
$
13,127

$
13,115

$

$
26,242


 Level 1 assets are priced using quoted prices in active markets for identical assets which include cash accounts and money market funds as these specific assets are liquid.

Level 2 available-for-sale securities are priced using quoted market prices for similar instruments or nonbinding market prices that are corroborated by observable market data. The Company uses inputs such as actual trade data, benchmark yields, broker/dealer quotes, and other similar data, which are obtained from quoted market prices, independent pricing vendors, or other sources, to determine the ultimate fair value of these assets and liabilities. The Company uses such pricing data as the primary input to make its assessments and determinations as to the ultimate valuation of its investment portfolio and has not made, during the periods presented, any material adjustments to such inputs. There were no transfers between levels during the year ended December 31, 2015.


60



NOTE 4. INVESTMENTS

The following tables summarize the Company’s available-for-sale investments at December 31, 2015 and 2014 (in thousands):

AVAILABLE-FOR-SALE INVESTMENTS
December 31, 2015
(in thousands)
 
Amortized
Cost
Gross
Unrealized
Gains
Gross
Unrealized
Losses
Fair Value
Asset-backed securities
$
2,510

$

$
(3
)
$
2,507

Corporate notes and bonds
9,341

1

(10
)
9,332

Total
$
11,851

$
1

$
(13
)
$
11,839


AVAILABLE-FOR-SALE INVESTMENTS
December 31, 2014
(in thousands)
 
Amortized Cost
Gross
Unrealized
Gains
Gross
Unrealized
Losses
Fair Value
Asset-backed securities
$
141

$

$

$
141

Corporate notes and bonds
12,967

10

(3
)
12,974

Total
$
13,108

$
10

$
(3
)
$
13,115


 The following table summarizes the maturities of the Company’s available-for-sale securities at December 31, 2015 and 2014 (in thousands):

AVAILABLE-FOR-SALE INVESTMENT MATURITIES
(in thousands)
 
At December 31, 2015
At December 31, 2014
 
Amortized
Cost
Fair Value
Amortized
Cost
Fair Value
Due in less than 1 year
$
11,851

$
11,839

$
10,586

$
10,585

Due in 1-3 years


2,522

2,530

Total
$
11,851

$
11,839

$
13,108

$
13,115


 For the years ended December 31, 2015 and 2014, $141,000 and $861,000 in proceeds from sales of marketable securities (including principle paydowns) were collected, respectively. The Company determines gains and losses of marketable securities based on specific identification of the securities sold. There were no gross realized gains and losses from sales of marketable securities for the years ended December 31, 2014 and 2015.

No other-than-temporary impairments are recorded as no investments had a fair value that remained less than its cost for more than twelve months as of December 31, 2015 and 2014. The Company does not intend to sell investments and it is more likely than not that we will not be required to sell investments before recovering the amortized cost.

NOTE 5. PROPERTY AND EQUIPMENT


61



Property and equipment are recorded at cost and consisted of the following at December 31, 2015 and 2014 (in thousands).
 
PROPERTY AND EQUIPMENT
(in thousands)
 
12/31/2015
12/31/2014
Computer equipment
$
1,877

$
1,020

Technical equipment
1,806

1,625

Facilities
1,772

842

Capital lease – leasehold improvements
266

266

Capital projects in progress
2,183

227

Total property and equipment
$
7,904

$
3,980

Accumulated amortization – capital lease
(266
)
(133
)
Accumulated depreciation - other
(2,622
)
(1,311
)
Net property and equipment
$
5,016

$
2,536


 Depreciation expense (which includes amortization of capital lease assets) for the for the years ended December 31, 2015, 2014 and 2013 was $1.8 million, $817,000 and $286,000, respectively.

NOTE 6. LICENSE AGREEMENTS AND GRANTS

Defense Medical Research and Development Program

In May 2012, the Company and Denver Health were notified that the Defense Medical Research and Development Program (“DMRDP”) recommended $2.0 million of funding for a proposed 35-month project. The joint proposal became the sole recipient under the Military Infectious Diseases Applied Research Award program for rapid detection of serious antibiotic-resistant infections. The project will apply the Accelerate ID/AST system to wound infections and other serious infections secondary to trauma. The Company has invoiced a cumulative total of $558,000 under this grant which is recorded as an offset to research and development expenses. The amount invoiced for the years ended December 31, 2015, 2014, 2013 was $179,000, $221,000, $143,000, respectively. The period of performance for the grant ended September 2015.

National Institute of Health Grant

In February 2015, the National Institute of Health awarded Denver Health and the Company a five year, $5.0 million grant to develop a fast and reliable identification and categorical susceptibility test carbepenem-resistant Enterobacteriaceae directly from whole blood. In June 2015, the Company executed a subaward agreement with Denver Health for the services we will provide as part of this grant which covers the period of February 15, 2015 through January 31, 2016 and totals $689,000. The amounts invoiced for the years ended December 31, 2015, 2014 and 2013 were $483,000, $0 and $0, respectively.

Arizona Commerce Authority

In August 2012, the Company entered into a Grant Agreement (the “Grant Agreement”) with the Arizona Commerce Authority, an agency of the State of Arizona (the “Authority”), pursuant to which the Authority provided certain state and county sponsored incentives for the Company to relocate its corporate headquarters to, and expand its business within, the State of Arizona (the “Project”). Pursuant to the Grant Agreement, the Authority agreed to provide a total grant in the amount of $1.0 million (the “Grant”) for the use by the Company in the advancement of the Project. The Grant is payable out of an escrow account in four installments, upon the achievement of the following milestones:

Milestone 1 – Relocation of Company’s operations and corporate headquarters to Arizona and creation of 15 Qualified Jobs (as defined below).

Milestone 2 – Creation of 30 Qualified Jobs (including Qualified Jobs under Milestone 1).


62



Milestone 3 – Creation of 40 Qualified Jobs (including Qualified Jobs under Milestones 1 and 2).

Milestone 4 – Creation of 65 Qualified Jobs (including Qualified Jobs under Milestones 1, 2 and 3) and capital investment of at least $4.5 million.

For purposes of the Grant Agreement, a “Qualified Job” is a job that is permanent, full-time, new to Arizona, and for which the Company pays average (across all Qualified Jobs identified by the Company in its discretion) annual wages of at least $63,000 and offers health insurance benefits and pays at least 65% of the premiums associated with such benefits. The amount of each installment payment will be determined in accordance with a formula specified in the Grant Agreement. The Grant Agreement also contains other customary provisions, including representations, warranties and covenants of both parties. As of December 31, 2015, the Company has collected all of the $1.0 million in milestones. The full amount is recorded in long-term deferred income until the economic development provisions of the grant have been satisfied in full, as there are “claw-back” provisions which would require repayment of certain amounts received if employment levels are not sustained during the term of the arrangement. Once the “claw-back” provisions expire in January 2018, we will recognize the grant as an offset to expense. Further details are included in Note 7, Deferred Revenue and Income.

Arizona R&D Refundable Tax Credit Program

The Company has applied for and met the program requirements to receive a “Certificate of Qualification” from the Arizona Commerce Authority (“Authority”) which allows the Company to be eligible for a partial refund of research and development investments ("Arizona R&D Refundable Tax Credit Program"). The amounts collected under this program are recorded as an offset to research and development expenses, and for the years ended December 31, 2015, 2014 and 2013 were $647,000, $527,000 and $0, respectively. If the amount received for this program is later determined to be incorrect or invalid, the excess may need to be repaid.

NOTE 7. DEFERRED REVENUE AND INCOME

Deferred revenue consists of amounts received for products or services not yet delivered or earned. Deferred income consists of amounts received for commitments not yet fulfilled. If we anticipate that the revenue or income will not be earned within the following twelve months, the amount is reported as long-term deferred income. A summary of the balances as of December 31, 2015 and 2014 follows (in thousands):

Deferred Revenue and Income
(in thousands)
 
12/31/2015
12/31/2014
Fisher agreement
$
13

$
13

Research Use Only Accelerate ID/AST systems
114


Total current deferred revenue and income
$
127

$
13

 
 
 
Arizona Commerce Authority grant
$
1,000

$
1,000

Fisher agreement

14

Total long-term deferred income
$
1,000

$
1,014


Through December 31, 2014, we received $1.0 million in milestone payments from the Arizona Commerce Authority under the Grant Agreement described in Note 6, License Agreements and Grants. As of December 31, 2015, no such payments have been recognized in income, and we do not anticipate recognizing such payments as income until the “claw-back” provisions under the Grant Agreement expire in January 2018.

Deferred income includes $114,000 of payments received in December 2015, for Research Use Only Accelerate ID/AST systems.

NOTE 8. STOCK PURCHASE

In April 2012, we entered into a Securities Purchase Agreement with Abeja Ventures, LLC (“Abeja”), pursuant to which the Company agreed to sell and issue to Abeja at a purchase price of $1.03 per share for an aggregate

63



purchase price of $14.4 million; (i) 14.0 million shares of the Company’s common stock (“Common Stock”); (ii) a warrant to purchase 7.0 million shares of Common Stock at an exercise price of $1.03 per share (the “$1.03 " Warrant”); and (iii) another warrant to purchase 7.0 million shares of Common Stock at an exercise price of $2.00 per share (the “$2.00" Warrant”), with each warrant exercisable prior to the fifth anniversary of the closing of the transactions contemplated by the Securities Purchase Agreement (collectively, the “Investment”). The purchase of Common Stock and warrants pursuant to the Investment, which was consummated in June, 2012, qualified for equity treatment under U.S. GAAP. The respective values of the warrants and Common Stock were calculated using their relative fair values and both are classified under Contributed Capital. The value therefore recorded for the warrants was $5.9 million and for the Common Stock was $8.5 million.

Both warrants are exercisable until June 26, 2017, which was the fifth anniversary of the date on which the warrants were issued. Other significant terms and conditions of the warrants are as follows:

the warrants provide for partial exercises, but they do not provide for a “cashless” exercise feature (i.e., they may only be exercised for cash);

the warrants do not contain anti-dilution provisions that would trigger exercise price or other adjustments as a result of subsequent issuances of the Company’s equity securities, but they do contain customary provisions for equitable adjustments in connection with stock dividends, stock splits or reclassifications of Common Stock;

following certain types of fundamental transactions involving the Company (e.g., a transaction resulting in a change in control of the Company), the holder of the warrants would continue to be entitled to exercise the warrants in exchange for the equity securities or alternate consideration receivable by a holder of Common Stock as a result of the fundamental transaction; and

the holder of the warrants is entitled to certain demand and piggy-back registration rights, including for shelf registrations, with respect to the shares of Common Stock issuable upon its exercise of the warrants.

In March 2013, Abeja exercised in full its warrant to purchase 7.0 million shares of Common Stock at an exercise price of $1.03 per share. On the same date, Abeja also exercised the 92% of its warrant to purchase an additional 7.0 million shares of Common Stock at an exercise price of $2.00 per share (Abeja exercised such warrant for 6.4 million shares, leaving 571,160 shares unexercised). The Company received aggregate funds of $20.1 million in connection with such exercises. Shares issued by the Company in connection with the warrant exercises were issued directly to the members of Abeja on a pro rata basis in accordance with their membership interests and written exercise instructions provided to the Company by Abeja. Immediately after giving effect to the warrant exercises, Abeja also distributed in kind to its members (on a pro rata basis in accordance with their membership interests) the remaining shares of Common Stock held by that entity.

NOTE 9. PUBLIC OFFERING

On December 9, 2015, the Company published a prospectus supplement underwritten by J.P. Morgan and Piper Jaffray ("Underwriters") offering 5.6 million shares of common stock with an option for the Underwriters to purchase up to 838,000 additional shares of common stock for a total of 6.4 million shares. The public offering price was $17.00 per share and underwriting discounts and commissions were $1.19 per share.

Affiliates, including entities affiliated with one of Company's directors, Jack Schuler, and which together are our largest stockholders, purchased 2.9 million of the offered shares at the public offering price of $17.00 per share. These shares are subject to lock-up agreements for a period of 90 days starting December 9, 2015. In general, the lock-up agreement, with limited exceptions, requires J.P. Morgan Securities LLC's prior written approval for the sale (directly or indirectly) of AXDX common stock. This includes various types of sales or offers to sell. The underwriters did not receive any underwriting discount or commissions on the sale of 2.4 million shares to such affiliates.

The public offering was finalized and 6.4 million shares of common stock were delivered to the purchasers on or around December 15, 2015. Proceeds from the sale totaled $109.3 million less underwriting and other expenses of $5.9 million for net proceeds of $103.4 million. The net proceeds will be used for general corporate purposes. We may also use a portion of the net proceeds to acquire or invest in complementary businesses, technologies, product candidates or other intellectual property, although we have no present commitments or agreements to do so. Accordingly, we will retain broad discretion over the use of these proceeds.

64




NOTE 10. RIGHTS OFFERING

April 2014 Offering

On April 7, 2014, the Company commenced a rights offering to raise $45.0 million to fund continued operations, clinical trials, and product commercialization efforts. Under the terms of the rights offering, the Company distributed, at no charge to the holders of its Common Stock as of March 14, 2014, which was established as the record date for the rights offering, 0.063921 non-transferable subscription rights for each share of Common Stock owned on the record date. Each whole subscription right allowed the holder to subscribe to purchase one share of Common Stock at a subscription price of $16.80 per share which was lower than the market price of $17.64 per share on the date of the rights offering commencement and the $17.54 per share on the date the rights offering period expired. In the aggregate, the Company intended to issue 2.7 million shares of Common Stock in connection with the rights offering. The purpose of the rights offering was to raise equity capital in a cost-effective manner that gives all of the Company’s existing stockholders the opportunity to participate on a pro rata basis.

In connection with the rights offering, the Company received standby commitments from the Jack W. Schuler Living Trust and the Schuler Family Foundation. The standby purchasers agreed to purchase any and all shares of Common Stock that were not subscribed for by stockholders in connection with the rights offering. On May 1, 2014, the Company entered into an Assignment and Assumption Agreement with the standby purchasers, Oracle Institutional Partners, L.P. and Oracle Partners, L.P., pursuant to which each standby purchaser assigned and transferred its respective rights, responsibilities, liabilities and obligations under the Standby Purchase Agreement to purchase 297,619 shares of Common Stock not subscribed for by the Company’s stockholders in connection with the rights offering to (i) Oracle Institutional Partners, L.P., with respect to 119,047 shares of such Common Stock, and (ii) Oracle Partners, L.P., with respect to the remaining 178,572 shares of such Common Stock.

The rights offering period expired on April 28, 2014, and the transactions contemplated by the rights offering and the Standby Purchase Agreement described above (including the Company’s issuance of an aggregate of 2.7 million shares of its Common Stock to the rights offering participants and standby purchasers) were completed on May 19, 2014. The Company received gross proceeds of $45.0 million before costs associated with the transactions which totaled $125,000 and are treated as a reduction of contributed capital in the Stockholders’ Equity section of the Balance Sheets.

Because the exercise price of the rights offering of $16.80 was less than the fair value of the Company’s shares of Common Stock at the expiration of the offering, there is a bonus element that is treated similar to a stock dividend. The weighted average shares outstanding, as well as the basic and diluted loss per share for the year ended December 31, 2013 and December 31, 2014 have been revised for those effects.

July 2013 Offering

On July 12, 2013, the Company publicly announced the final terms of a rights offering. Rights offering materials were subsequently distributed to the Company’s stockholders on July 18, 2013, at which time the rights offering period commenced. Pursuant to the terms of the rights offering, the Company distributed, at no charge to the holders of its Common Stock on July 8, 2013, which was established as the record date for the rights offering, 0.064038 non-transferable subscription rights for each share of Common Stock owned on the record date. Each whole subscription right allowed the holder to subscribe to purchase one share of Common Stock at a subscription price of $8.04 per share. In addition, any holder of subscription rights exercising his, her or its basic subscription privilege in full was eligible to subscribe to purchase additional shares of Common Stock at the same subscription price per share, subject to the conditions and limitations described further in the prospectus.

In connection with the rights offering, the Company received a standby commitment from Abeja to purchase, at $8.04 per share, any and all shares of Common Stock that were not subscribed for by stockholders in connection with the rights offering.

The rights offering period expired on August 7, 2013, and the transactions contemplated by the rights offering and the Standby Purchase Agreement described above (including the Company’s issuance of an aggregate of 2.5 million shares of its Common Stock to the rights offering participants and standby purchaser) were completed on August 8, 2013. The Company received gross proceeds of $20.0 million before costs associated with the transactions, which totaled $88,000 and are treated as a reduction of contributed capital in the Stockholders’ Equity section of the

65



Balance Sheets.

NOTE 11. EARNINGS PER SHARE

The financial statements show basic earnings (loss) per share.

The Company’s net loss for the periods presented caused the inclusion of all outstanding warrants, restricted stocks and options to purchase our Common Stock to be antidilutive. As of December 31, 2015, 2014 and 2013, there were Common Stock options, restricted stocks and warrants exercisable for 6,778,580, 6,174,886 and 5,731,246 shares of Common Stock, respectively, which were not included in diluted loss per share as the effect was antidilutive.

Weighted average shares outstanding for the year ended December 31, 2013 have been revised for the effects of the rights offering (See Note 10, Rights Offering).

NOTE 12. EMPLOYEE AND CONSULTANT EQUITY-BASED COMPENSATION

The Company has 4 equity-based compensation plans, which are discussed below:

Qualified Stock Option Plan

The Qualified Stock Option Plan (the “Qualified Plan”) was a stockholder-approved plan that provided for stock option grants to employees, including executive officers. The exercise price of each option, which has a maximum ten-year life, was established by the Company's Compensation Committee on the date of grant.

As of December 31, 2015, there were 527,500 options exercised under the Qualified Plan and none that remain outstanding. The Qualified Plan has been replaced by the 2012 Omnibus Equity Incentive Plan, so no further options are available for grant.

Non-Qualified Stock Option Plan

The Non-Qualified Stock Option Plan (the “Non-Qualified Plan”) was a stockholder-approved plan that provided for stock option grants to independent contractors, technical advisors and directors of the Company. The exercise price of each option, which has a maximum 10 year life, was established by the Company's Compensation Committee on the date of grant.

As of December 31, 2015, there were 270,000 options exercised under the Non-Qualified Plan and 10,000 that remain outstanding. The Non-Qualified Plan has been replaced by the 2012 Omnibus Equity Incentive Plan, so no further options are available for grant.

2004 Omnibus Stock Option Plan

In December 2004, the Company’s stockholders approved the Omnibus Stock Option Plan and reserved 500,000 shares of its authorized but unissued Common Stock for stock options to be granted to employees, independent contractors, technical advisors and directors of the Company. The authorized shares in this plan were increased by 5,000,000 shares to an aggregate amount of 5,500,000 upon stockholder approval during the fiscal year ended July 31, 2012.

As of December 31, 2015, there were 403,474 options exercised under the 2004 Omnibus Stock Option Plan and 3,536,526 that remain outstanding. The 2004 Omnibus Stock Option Plan has been replaced by the 2012 Omnibus Equity Incentive Plan, so no further options are available for grant.

2012 Omnibus Equity Incentive Plan

In December 2012, the Company’s stockholders approved the Company’s 2012 Omnibus Equity Incentive Plan to replace the Qualified Stock Option Plan, Non-Qualified Stock Option Plan and 2004 Omnibus Stock Option Plan (“Prior Plans”). The Prior Plans remain in effect until all awards granted under those plans have been exercised, forfeited, canceled, expired or otherwise terminated.

In connection with the approval of such plan, all stock options, totaling 1,677,500 formerly available for new

66



awards under the Prior Plans were transferred to the 2012 Omnibus Equity Incentive Plan.

At the Company’s 2014 Annual Meeting of Stockholders held in May 2014, stockholders approved an amendment to the Company’s 2012 Omnibus Equity Incentive Plan increasing the number of stock options of Common Stock reserved and available for grant by 4,000,000 to 5,677,500 shares.

Stock options granted under this plan typically vest either (i) one year after grant date, (ii) monthly over a one year period, or (iii) 40% two years after grant date and the remaining 60% monthly over the next three years. The maximum term is ten years.

As of December 31, 2015, there were 71,147 options exercised under the 2012 Omnibus Equity Incentive Plan and 2,660,894 that remain outstanding, leaving 2,945,459 available for grant.

In December 2015, the board of directors voted to restrict new grants under the 2012 Omnibus Equity Incentive Plan to 200,000 shares until such time as the Company’s total available shares are increased.

Combined Plans

The following table summarizes option activity under all plans during the years ending December 31, 2015 and December 31, 2014 and shows the exercisable shares as of December 31, 2015:

Stock Option Activity
 
Number of Shares
Weighted Average Exercise Price per Share
Options Outstanding January 1, 2014
5,185,086

$
3.45

Granted
769,055

16.22

Forfeited
(13,678
)
13.06

Exercised
(311,737
)
2.96

Expired


Options Outstanding December 31, 2014
5,628,726

5.20

Granted
717,833

20.59

Forfeited
(54,505
)
11.71

Exercised
(124,884
)
6.44

Expired


Options Outstanding December 31, 2015
6,167,170

6.91

Exercisable December 31, 2015
1,536,520

7.11


The cash received from the exercise of options during the year ending December 31, 2015 was $805,000 and the tax benefit realized was $0 for the same period. Upon exercise, shares are issued from shares authorized and held in reserve. The intrinsic value of options exercised was $2.0 million, $3.8 million and $2.6 million for the years ending December 31, 2015, 2014, and 2013 respectively.

The total fair value of shares vesting during the period was $7.3 million, $3.8 million, and $600,000 for the years ending December 31, 2015, 2014, and 2013, respectively.

As discussed in Note 2, Summary of Significant Accounting Policies, the Company accounts for all option grants using the Black-Scholes option pricing model in accordance with ASC 718 for options granted or extended. Note 2 also describes the significant assumptions utilized for estimating the various inputs required this pricing model. The table below summarizes the resulting weighted average inputs used to calculate the estimated fair value of options awarded for during the periods shown below:


67



Black-Scholes Assumptions for Option Granted
 
12 months
12 months
12 months
 
12/31/2015
12/31/2014
12/31/2013
Expected term (in years)
6.26

6.25

6.28

Volatility
91
%
96
%
97
%
Expected dividends



Risk free interest rates
1.7
%
1.9
%
1.5
%
Estimated forfeitures
5.6
%
0.4
%
14.0
%
Weighted average fair value
$
16.69

$
12.63

$
6.05


In general, option awards have a requisite service period and unvested options are forfeited upon employee or consultant termination. The Company estimates a forfeiture rate which is applied to outstanding options to determine options expected to be forfeited with the remaining outstanding options being those expected to vest. Further information regarding the forfeiture rate calculation is included in Note 2, Summary of Significant Accounting Policies. The following table shows summary information for outstanding options, options that are exercisable (vested) and outstanding options that are either vested or expected to vest as of December 31, 2015:

Stock Option Supplemental Information
 
Options
Outstanding
Options
Exercisable
Options Vested and Expected to Vest
Number of options
6,167,170

1,536,520

6,088,562

Weighted average remaining contractual term (in years)
7.19

7.18

7.18

Weighted average exercise price
$
6.91

$
7.11

$
6.80

Weighted average fair value
$
5.43

$
5.48

$
5.34

Aggregate intrinsic value (in thousands)
$
86,102

$
21,734

$
85,804


 The aggregate intrinsic value in the table above represents the total pretax intrinsic value that would have been received by the option holders had all option holders exercised their options on that date. It is calculated as the difference between the Company’s closing stock price of $21.49 on the last trading day of 2015 and the exercise price multiplied by the number of shares for options where the exercise price is below the closing stock price. This amount changes based on the fair market value of the Company’s stock.

In December 2015, in connection with the Company's public offering, we modified the stock options of three of our executive officers to restrict the ability to exercise until such time as additional available unissued shares have been authorized.  Such authorization was obtained for a majority of our shareholders as of December 31, 2015 and was pending submission to the State of Delaware.  There was an immaterial amount of incremental compensation associated with this modification.

The following table summarizes restricted stock activity during the years ending December 31, 2015 and December 31, 2014:

Restricted Stock Activity
 
Number of Shares
Weighted Average Grant Date Fair Value per Share
Restricted stock outstanding December 31, 2014


Granted
40,250

20.91

Forfeited


Vested/released


Restricted stock outstanding December 31, 2015
40,250

20.91



68



The expense and tax benefits recognized on Company’s Statements of Operations and Comprehensive Loss related to options is summarized below (in thousands):

Equity-Based Compensation Expenses and Tax Benefit
(in thousands)
 
12 months
12 months
12 months
 
12/31/2015
12/31/2014
12/31/2013
Research and development
$
2,479

$
4,334

$
1,655

Sales, general and administrative
5,909

5,290

2,173

Equity-based compensation expense
8,388

9,624

3,828

Recognized tax benefit
$

$

$


As of December 31, 2015, unrecognized equity-based compensation cost related to unvested stock options and unvested restricted stock was $11.4 million. This is expected to be recognized over the years 2016 through 2020.

NOTE 13. INCOME TAXES

The components of the pretax loss from operations for the years ended December 31, 2015, 2014, and 2013 are as follows (in thousands):

Components of the Pretax Loss From Operations
(in thousands)
 
12/31/2015
12/31/2014
12/31/2013
U.S. Domestic
$
(44,415
)
$
(30,933
)
$
(15,282
)
Foreign
(1,083
)


Pretax loss from operations
$
(45,498
)
$
(30,933
)
$
(15,282
)

The Company does not reflect income tax expense or benefit for the years ended December 31, 2015, 2014, and 2013, as the Company has a full valuation allowance. The Company records the Arizona R&D Refundable Tax Credit Program it has monetized as an offset to research and development expenses on the consolidated statement of operations and comprehensive loss as discussed in Note 6, License Agreements and Grants.


69



Deferred income taxes reflect the net tax effects of temporary differences between the carrying amounts of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. Significant components of the Company’s net deferred income taxes for the years ending December 31, 2015 and 2014, are as are as follows:

Deferred Income Tax Components
(in thousands)
 
12/31/2015
12/31/2014
Deferred tax assets:
 
 
Net operating loss carryforward
$
28,584

$
15,492

Property & equipment
339

77

Inventory
864

620

Stock options
5,208

3,644

Intangible assets, definite-lived
333

421

General business credit
1,915

885

Deferred revenue
372

380

Other
187


Charitable contribution
18

13

Valuation allowance
(37,820
)
(21,532
)
Deferred tax assets
$

$


As of December 31, 2015, the Company has generated regular tax federal net operating losses of approximately $85.0 million. The Company's ability to realize tax benefit from the net operating loss is subject to annual limitation under Internal Revenue Code Section 382. Due to the change in control which occurred as a result of Abeja Ventures, LLC’s investment in the Company on June 26, 2012, the Company estimates that the annual Section 382 limitation on utilization of net operating losses will be $420,000. As such, the Company will never get the benefit of $4.2 million of the net operating losses generated prior to June 26, 2012. The deferred tax asset has been adjusted to reflect the Section 382 limitation. Section 382 also applies to built-in losses at the time of the transaction. The amounts of any unrealized built-in losses or gains were not calculated at the date of the transaction. The gross net operating losses available for future use are approximately $80.8 million. For federal purposes, net operating losses can be carried forward for up to 20 years. The Company’s net operating losses will begin to expire in 2023.

The Company relocated its headquarters to Arizona in January 2013. As of December 31, 2015, the Company has generated Arizona net operating losses of approximately $69.6 million. The Company's Arizona net operating losses will begin to expire in 2033.

The Company created a Spanish subsidiary in January of 2015 which generated a tax net operating loss of approximately $403,000. The Spanish net operating losses carry over indefinitely.

The net deferred tax asset valuation allowance is $37.8 million as of December 31, 2015 compared to $21.5 million as of December 31, 2014. The valuation allowance is based on management’s assessment that it is more likely than not that the Company will not have taxable income in the foreseeable future.


70



The difference between the U.S. federal statutory income tax rate and the Company’s effective tax rate for years ending December 31, 2015, 2014, and 2013 is as follows:

Effective Tax Rate
 
12/31/2015
12/31/2014
12/31/2013
U.S. federal statutory income tax rate
(34.00
)%
(34.00
)%
(34.00
)%
State taxes, net of federal tax benefit
(2.93
)
(3.20
)
(3.80
)
Permanent differences
0.11



Rate differential
0.42



Unrecognized tax benefits
0.40



Nondeductible equity and other compensation
2.86

3.70

1.20

Limitation on net operating losses due to §382

0.50

1.00

Credit for increased research activities
(2.67
)
(0.80
)
(3.20
)
Change in Valuation allowance
35.81

33.80

38.80

 
 %
 %
 %

At December 31, 2015, the Company had uncertain tax positions of $343,000, determined as follows:

Uncertain Tax Positions
(in thousands)
 
 
12/31/2015
12/31/2014
12/31/2013
Balance at beginning of year
$
161

$

$

Increases for prior positions

78


Increases for current year positions
182

83


Other Increases



Decreases due to settlements



Expiration of the statute of limitations for the assessment of taxes



Other Decreases



Balance at end of year
$
343

$
161

$


These uncertain positions are not expected to change within the next twelve months. Of the $343,000 of uncertain tax positions, none would impact the effective tax rate, if reversed. The Company accounts for interest on uncertain tax positions within tax expense.

The Company has incurred federal net operating losses (NOLs) dating to the tax year ended July 31, 2004. As such, all loss carryovers are subject to adjustment under IRS and state examination, depending on the jurisdiction in which they were incurred.

NOTE 14. COMMITMENTS

Leases

The Company has entered into lease agreements, lease amendments, and lease extensions ("Lease Agreements") for office, laboratory and manufacturing space located in Tucson, Arizona, the last of which expires in 2018. In addition to rental payments and other standard provisions, one of the leases requires the Company to relocate to Tucson and comply with certain employment provisions through the term of the lease. If such requirements are not met, the rental rate is increased. We are in compliance with the lease terms as of fiscal years ending December 31, 2015, 2014 and 2013, thus no increased rental rates were paid.

In October 2013, as a condition of a Lease Agreement, the Company expanded its lease premises whereby the landlord provided tenant improvements. These tenant improvements are treated as a capital lease whereby both an asset and a liability have been recorded and periodic interest based on an annual rate of 4% and depreciation are recorded to amortize the value of this asset and the liability over the remaining lease term. The Company incurred

71



interest cost of $4,000, $7,000 and $0 for and the years ended December 31, 2015 , 2014, and 2013, respectively. Further details regarding this capital lease are included in Note 5, Property and Equipment.

The future minimum lease payments under the capital lease together with the present value of the net minimum lease payments as of December 31, 2015 are as follows:

Capital Lease Obligations
(in thousands)
Year ending December 31:
 
2016
$
13

2017

2018

2019

2020

Total minimum lease payments
$
13

Less amount representing interest

Present value minimum lease payments
$
13


Total rent expense for the Tucson facility, including common area charges was $685,000, $293,000 and $168,000 for the years ended December 31, 2015, 2014 and 2013, respectively. Future minimum lease payments under this agreement are as follows (in thousands):

Operating Lease Obligations
(in thousands)
Year ending December 31:
 
2016
$
954

2017
171

2018
4

2019

Thereafter

Total operating lease obligations
$
1,129


Clinical Trial Agreements

The Company has entered into master agreements with clinical trial sites in which we typically pay a set amount for start-up costs and then pay for work performed. These agreements typically indemnify the clinical trial sites from any and all losses arising from third party claims as a result of the Company's negligence, willful misconduct or misrepresentation. As of December 31, 2015 we had a payable of $512,000 to the clinical trial sites and incurred expense of $1.6 million. No amounts were incurred for these arrangements through December 31, 2014. The expense incurred as part of the clinical trial is included in research and development on the consolidated statements of operations and comprehensive loss.

Legal Matters

On March 19, 2015, a putative securities class action lawsuit was filed against Lawrence Mehren, and Steve Reichling, Rapp v. Accelerate Diagnostics, Inc., et al., U.S. District Court, District of Arizona, 2:2015-cv-00504. The complaint alleges that we violated Sections 10(b) and 20(a) of the Securities Exchange Act of 1934, and SEC Rule 10b-5, by making false or misleading statements about our ID/AST System, formerly called the BACcel System. Plaintiff purports to bring the action on behalf of a class of persons who purchased or otherwise acquired our stock between March 7, 2014 and February 17, 2015. On June 9, 2015, Julia Chang was appointed Lead Plaintiff of the purported class. On June 23, 2015, Plaintiff filed an amended complaint alleging violations of Sections 10(b) and 20(a) of the Securities Exchange Act of 1934 and Rule 10b- 5, by making false or misleading statements or omissions about our ID/AST System and by allegedly employing schemes to defraud. Plaintiff seeks certification of the action as a class action, compensatory damages for the class in an unspecified amount, legal fees and costs, and such other relief as

72



the court may order. Defendants moved to dismiss the amended complaint on July 21, 2015, which motion was pending before the Court as of December 31, 2015. Subsequently, the Court granted the motion and dismissed the case with prejudice on January 28, 2016. On February 26, 2016, plaintiff filed a notice of appeal with the United States Court of Appeals for the Ninth Circuit. Plaintiff challenges the dismissal of the amended complaint. Plaintiff’s opening brief, if she does not seek additional time, is due June 6, 2016. See Item 8, Note 16, Subsequent Events for an update on this lawsuit.

Employment Agreement and Consulting Agreement

In 2012, Thomas V. Geimer resigned as the Company’s Chief Executive Officer, Chief Financial Officer and Secretary. In connection with his resignation, Mr. Geimer had an agreement with the Company to receive staggered payments due to him such that $650,000 was paid upon the closing of the July 2013 Offering as described Item 8, Note 10, Rights Offering and $700,000 payable to him on July 1, 2013. From January 1, 2013 through December 31, 2013, Mr. Geimer’s aggregate consulting fee was $96,000. As of December 31, 2014, no additional amounts were due under the Agreement and no further amounts were incurred during the year ending December 31, 2015.

NOTE 15. SEGMENTS

The Company operates as one operating segment. Operating segments are defined as components of an enterprise for which separate financial information is evaluated regularly by the chief operating decision maker, who is the chief executive officer, in deciding how to allocate resources and assessing performance. The Company’s business operates in one operating segment because the Company’s chief operating decision maker evaluates the Company’s financial information and resources and assesses the performance of these resources on a consolidated basis. Since the Company operates in one operating segment, all required financial segment information can be found in the consolidated financial statements.

NOTE 16. SUBSEQUENT EVENTS

Arizona R&D Refundable Tax Credit Program

In January 2016, we were notified by the Arizona Commerce Authority (“Authority”) that we meet the program requirements to receive a “Certificate of Qualification” and, therefore, are eligible for a partial refund of research and development investments amounting to a maximum of $1.2 million. The “Certificate of Qualification” does not obligate the Arizona Department of Revenue to issue the refund. Furthermore, the calculation of the actual refund due will be based on actual qualifying expenses and income tax liability for the 2015 tax year and if qualifying expenses decrease or income tax liability increases, the refund amount may be less than the $1.2 million. If the amount received for this program is later determined to be incorrect or invalid, the excess may need to be repaid.

Legal Matters

On January 28, 2016, the United States District Court for the District of Arizona granted Accelerate Diagnostics’ Motion to Dismiss the class action lawsuit filed against it in March of 2015. In granting the company’s motion, the court ordered that the action be dismissed with prejudice in its entirety. On February 26, 2016, plaintiff filed a notice of appeal with the United States Court of Appeals for the Ninth Circuit. Plaintiff challenges the dismissal of the amended complaint. Plaintiff’s opening brief, if she does not seek additional time, is due June 6, 2016.


73



NOTE 17. SUPPLEMENTAL DATA QUARTERLY FINANCIAL INFORMATION (UNAUDITED)

QUARTERLY FINANCIAL INFORMATION
(in thousands, except per share data)
Unaudited
For the quarters ending:
 
12/31/2015
9/30/2015
6/30/2015
3/31/2015
12/31/2014
9/30/2014
6/30/2014
3/31/2014
Revenue
$
22

$
92

$
19

$
14

$
79

$
16

$
13

$
14

Net loss
(13,163
)
(11,186
)
(12,252
)
(8,897
)
(8,765
)
(8,814
)
(8,152
)
(5,202
)
Basic and diluted net loss per share (1)
(0.29
)
(0.25
)
(0.27
)
(0.20
)
(0.20
)
(0.20
)
(0.19
)
(0.12
)

 (1)  Loss per share has been adjusted for the effects of the rights offering (see Item 8, Note 10, Rights Offering).



74



Item 9. Changes in and Disagreements with Accountants on Accounting and Financial Disclosure

None.


75




Item 9A. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Based on an evaluation under the supervision and with the participation of the Company’s management, the Company’s Principal Executive Officer and Principal Financial Officer have concluded that the Company’s disclosure controls and procedures as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act were effective as of December 31, 2015 to ensure that information required to be disclosed by the Company in reports that it files or submits under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and (ii) accumulated and communicated to the Company’s management, including its Principal Executive Officer and Principal Financial Officer, as appropriate to allow timely decisions regarding required disclosure.

Management’s Report on Internal Control over Financial Reporting

Management is responsible for establishing and maintaining adequate internal control over financial reporting. The Company’s internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with GAAP. The Company’s internal control over financial reporting includes those policies and procedures that:

pertain to the maintenance of records that in reasonable detail accurately and fairly reflect the transactions and dispositions of our assets;

provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with U.S. GAAP, and that our receipts and expenditures are being made only in accordance with authorizations of our management and our directors; and

provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on the financial statements.

Management, including the Company’s Chief Executive Officer and Chief Financial Officer, does not expect that the Company’s internal controls will prevent or detect all errors and all fraud. A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of internal controls can provide absolute assurance that all control issues and instances of fraud, if any, have been detected. Also, any evaluation of the effectiveness of controls in future periods are subject to the risk that those internal controls may become inadequate because of changes in business conditions, or that the degree of compliance with the policies or procedures may deteriorate.

Management assessed the effectiveness of our internal control over financial reporting as of December 31, 2015. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control - Integrated Framework (2013 Framework). Based on that assessment, management concluded that, during the period covered by this report, such internal controls and procedures were effective as of December 31, 2015.

Attestation Report of Independent Registered Public Accounting Firm

The attestation report required under this Item 9A is contained in Item 8 of Part II of this Annual Report on Form 10-K under the heading “Report of Independent Registered Public Accounting Firm”.

Changes in Internal Control Over Financial Reporting

There was no change in the Company’s internal control over financial reporting during the period ended December 31, 2015 that materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.


76



Item 9B. Other Information

Not Applicable.

PART III

Certain information required by Part III is omitted from this Annual Report on Form 10-K because the required information will be incorporated by reference to our definitive proxy statement for our 2016 Annual Meeting of Stockholders, to be filed with the SEC pursuant to Regulation 14A of the Exchange Act (the “Proxy Statement”) not later than 120 days after the end of the fiscal year covered by this Annual Report on Form 10-K.

Item 10. Directors, Executive Officers and Corporate Governance

The information required by this Item will be disclosed in the Proxy Statement and is incorporated by reference to the Proxy Statement.

Item 11. Executive Compensation

The information required by this Item will be disclosed in the Proxy Statement and is incorporated by reference to the Proxy Statement.

Item 12. Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters

The information required by this Item will be disclosed in the Proxy Statement and is incorporated by reference to the Proxy Statement.

Item 13. Certain Relationships and Related Transactions, and Director Independence

The information required by this Item will be disclosed in the Proxy Statement and is incorporated by reference to the Proxy Statement.

Item 14. Principal Accounting Fees and Services

The information required by this Item will be disclosed in the Proxy Statement and is incorporated by reference to the Proxy Statement.

Item 15. Exhibits, Financial Statement Schedules

a)    Documents filed as part of this report
1)    All financial statements

77




2)           Financial Statement of Schedules

All financial statement schedules have been omitted, since the required information is not applicable or because the information required is included in the financial statements and notes thereto.

b)           Exhibits required by Item 601 of Registration S-K

The information required by this Item is set forth on the exhibit index that follows the signature page of this report.


78



SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this Report to be signed on its behalf by the undersigned, thereunto duly authorized.

 
ACCELERATE DIAGNOSTICS, INC.
 
 
 
March 9, 2016
 
By:  /s/ Lawrence Mehren
 
 
Lawrence Mehren
President and Chief Executive Officer

Power of Attorney

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Lawrence Mehren, as his attorney-in-fact, with the power of substitution, for him in any and all capacities, to sign any amendments to this Annual Report on Form 10-K, and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that said attorney-in-fact, or his substitute or substitutes, may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this Report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.

Signature
 
Title
 
Date
 
 
 
 
 
/s/ Lawrence Mehren
Lawrence Mehren
 
President, Chief Executive Officer and Director
 
March 9, 2016
 
 
 
 
 
/s/ Steve Reichling
Steve Reichling
 
Corporate Secretary, Chief Financial Officer and Chief Accounting Officer
 
March 9, 2016
 
 
 
 
 
/s/ John Patience
John Patience
 
Chairman of the Board of Directors
 
March 9, 2016
 
 
 
 
 
/s/ Jack Schuler
Jack Schuler
 
Director
 
March 9, 2016
 
 
 
 
 
/s/ Matthew W. Strobeck, Ph.D.
Matthew W. Strobeck, Ph.D.
 
Director
 
March 9, 2016
 
 
 
 
 
/s/ Frank ten Brink
Frank ten Brink
 
Director
 
March 9, 2016
 
 
 
 
 
/s/ Mark Miller
Mark Miller
 
Director
 
March 9, 2016

EXHIBIT INDEX

79



Exhibit No.
Description
 
Filing Information
3.1
Certificate of Incorporation of Registrant
 
Incorporated by reference to Appendix B of the Registrant’s Definitive Proxy Statement on Schedule 14A filed on November 13, 2012
3.1.1
Certificate of Amendment to Certificate of Incorporation of Registrant
 
Incorporated by reference to Exhibit A to the Registrant’s Definitive Information Statement on Schedule 14C filed on July 12, 2013
3.2
Bylaws of Registrant
 
Incorporated by reference to Exhibit 3.2 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012.
4.1
Warrant No. 2 issued by Registrant to Abeja Ventures, LLC on June 26, 2012
 
Incorporated by reference to Exhibit 4.2 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012  
4.2
Subscription and Information Agent Agreement, dated March 10, 2014, by and between the Registrant and Broadridge Corporate Issuer Solutions, Inc.
 
Incorporated by reference to Exhibit 4.2 to the Form S-3 Registration Statement (No. 333-194474) filed by the Registrant on March 10, 2014
4.3
Form of Non-Transferable Subscription Rights Certificate
 
Incorporated by reference to Exhibit 4.1 to the Registration Statement on Form S-3/A (Amendment No. 1) (File No. 333-194474) filed by the Registrant on April 7, 2014
4.4
Form of Senior Indenture
 
Incorporated by reference to Exhibit 4.2 of the Registrant’s Form S-3 Registration Statement (No. 333-192321), Amendment No. 1, filed on December 2, 2013
4.5
Form of Subordinated Indenture
 
Incorporated by reference to Exhibit 4.2 of the Registrant’s Form S-3 Registration Statement (No. 333-192321), Amendment No. 1, filed on December 2, 2013
10.1
Registrant’s 2004 Omnibus Stock Option Plan*
 
Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement on Schedule 14A filed on November 15, 2004
10.2
Amendment to Registrant’s 2004 Omnibus Stock Option Plan*
 
Incorporated by reference to Annex C of the Registrant’s Definitive Proxy Statement on Schedule 14A filed on May 17, 2012
10.3
Form of Stock Option Award Agreement under Registrant’s 2004 Omnibus Stock Option Plan*
 
Incorporated by reference to Exhibit 4.4 filed with the Registrant’s Form S-8 Registration Statement (No. 333-182930) on July 30, 2012
10.4
Securities Purchase Agreement between Registrant and Abeja Ventures, LLC, dated as of April 20, 2012
 
Incorporated by reference to Exhibit 10.1 filed with the Registrant’s Form 10-Q/A for the quarterly period ended April 30, 2012
10.5
Registration Rights Agreement between Registrant and Abeja Ventures, LLC, dated as of June 26, 2012
 
Incorporated by reference to Exhibit 10.5 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012
10.6
Offer Letter between Registrant and Lawrence Mehren, dated as of June 24, 2012*
 
Incorporated by reference to Exhibit 10.9 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012


80



10.7
CFO Offer Letter between Registrant and Steve Reichling, dated as of August 8, 2012*
 
Incorporated by reference to Exhibit 10.10 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012
10.8
Lease Agreement between Registrant and Pima County, dated as of August 20, 2012
 
Incorporated by reference to Exhibit 10.11 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012
10.9
Grant Agreement between Registrant and the Arizona Commerce Authority, dated as of August 22, 2012
 
Incorporated by reference to Exhibit 10.12 filed with the Registrant’s Annual Report on Form 10-K for the fiscal year ended July 31, 2012
10.10
Registrant’s 2012 Omnibus Equity Incentive Plan*
 
Incorporated by reference to Appendix C of the Registrant’s Definitive Proxy Statement on Schedule 14A filed on November 13, 2012
10.10.1
First Amendment to Registrant’s 2012 Omnibus Equity Incentive Plan*
 
Incorporated by reference to Exhibit 99.2 to the Form S-8 Registration Statement (No. 333-187439) filed by the Registrant on March 22, 2013
10.10.2
Form of Nonqualified Stock Option Award Agreement under Registrant’s 2012 Omnibus Equity Incentive Plan*
 
Incorporated by reference to Exhibit 99.3 to the Form S-8 Registration Statement (No. 333-187439) filed by the Registrant on March 22, 2013
10.10.3
Form of Incentive Stock Option Award Agreement under Registrant’s 2012 Omnibus Equity Incentive Plan*
 
Incorporated by reference to Exhibit 99.4 to the Form S-8 Registration Statement (No. 333-187439) filed by the Registrant on March 22, 2013
10.10.4
Second Amendment to Registrant’s 2012 Omnibus Equity Incentive Plan*
 
Incorporated by reference to Appendix A of the Registrant’s Definitive Proxy Statement on Schedule 14A filed on April 15, 2014
10.11
Standby Purchase Agreement, dated March 10, 2014, among the Registrant and the Jack W. Schuler Living Trust and the Schuler Family Foundation
 
Incorporated by reference to Exhibit 10.1 to the Form S-3 Registration Statement (No. 333-194474) filed by the Registrant on March 10, 2014
10.12
Assignment and Assumption Agreement, dated as of May 1, 2014, by and among Schuler Family Foundation, Jack Schuler, Trustee of the Jack W. Schuler Living Trust, Oracle Institutional Partners, L.P., Oracle Partners, L.P. and the Registrant
 
Incorporated by reference to Exhibit 10.1 to the Current Report on Form 8-K filed by the Registrant on May 2, 2014
21
List of Subsidiaries
 
Filed herewith
23.1
Consent of Independent Registered Public Accounting Firm (Ernst & Young LLP)
 
Filed herewith  
31.1
Certification of Principal Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
Filed herewith
31.2
Certification of Principal Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
Filed herewith
32
Certificate of Principal Executive Officer and Principal Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
Filed herewith
101**
XBRL Instance Document
 
 
101**
XBRL Taxonomy Extension Schema Document
 
 
101**
XBRL Taxonomy Calculation Linkbase Document
 
 
101**
XBRL Taxonomy Extension Definition Linkbase Document
 
 
101**
XBRL Taxonomy Label Linkbase Document
 
 
101**
XBRL Taxonomy Presentation Linkbase Document
 
 



81