UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

 (Mark One)

For the fiscal year ended December 31, 2015

or

Commission File Number 1-10560

BENCHMARK ELECTRONICS, INC.

(Exact name of registrant as specified in its charter)

3000 Technology Drive

Angleton, Texas 77515

(979) 849-6550

(Address, including zip code, and telephone number, including area code, of principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act: None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes [Ö] No [  ]

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes [  ] No [Ö] 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes [Ö] No [  ]

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter periods that the registrant was required to submit and post such files).

Yes [Ö]  No [  ]

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. [Ö] 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b–2 of the Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b–2 of the Act).

Yes [  ] No [Ö] 

As of June 30, 2015, the number of outstanding Common Shares was 51,730,365. As of such date, the aggregate market value of the Common Shares held by non-affiliates, based on the closing price of the Common Shares on the New York Stock Exchange on such date, was approximately $1.1 billion.

As of February 25, 2016, there were 49,819,231 Common Shares of Benchmark Electronics, Inc., par value $0.10 per share, outstanding.

Documents Incorporated by Reference:

Portions of the Company’s Proxy Statement for the 2016 Annual Meeting of Shareholders (Part III, Items 10-14).

TABLE OF CONTENTS

PART I

Item 1.  Business. 

This annual report (the Report) contains forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. These forward-looking statements are identified as any statement that does not relate strictly to historical or current facts and includes words such as “anticipate,” “believe,” “intend,” “plan,” “projection,” “forecast,” “strategy,” “position,” “continue,” “estimate,” “expect,” “may,” “will,” or the negative or other variations thereof. In particular, statements, whether express or implied, concerning future operating results or the ability to generate sales, income or cash flow are forward-looking statements. Undue reliance should not be placed on any forward-looking statements. Forward-looking statements are not guarantees of performance. They involve risks, uncertainties and assumptions that are beyond our ability to control or predict, including those discussed under Item 1A of this Report. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual outcomes, including the future results of our operations, may vary materially from those indicated.

The Company’s fiscal year ends on December 31. Consequently, references to 2015 relate to the calendar year ended December 31, 2015; references to 2014 relate to the year ended December 31, 2014, etc.

General

Benchmark Electronics, Inc. (Benchmark), a Texas corporation, began operations in 1979 and has become a worldwide provider of integrated manufacturing, design and engineering services and product life cycle solutions. In this Report, references to Benchmark, the Company or use of the words “we”, “our” and “us” include the subsidiaries of Benchmark unless otherwise noted.

We provide our services to original equipment manufacturers (OEMs) of industrial equipment (including equipment for the aerospace and defense industries), telecommunication equipment, computers and related products for business enterprises, medical devices, and testing and instrumentation products. A substantial portion of our services are commonly referred to as electronics manufacturing services (EMS).

We offer comprehensive and integrated design and manufacturing services and solutions—from initial product concept to volume production including direct order fulfillment and post-deployment services. Our operations comprise three principal areas:

·         Manufacturing and assembly operations, which include printed circuit board assemblies (PCBAs) and subsystem assembly, box build and systems integration. Systems integration is often building a finished assembly that includes PCBAs, complex subsystem assemblies, mechatronics, displays, optics, and other components. These final products may be configured to order and delivered directly to the end customer across all the industries we serve.

·         Precision technology manufacturing, which complements our electronic manufacturing expertise by providing further vertical integration of critical mechanical components. These capabilities include precision machining, advanced metal joining, assembly and functional testing primarily for customers in the medical, aerospace, and test & instrumentation markets (which include semiconductor capital equipment).

·         Specialized engineering services and solutions, which includes product design for electronic systems, sub-systems, and components, printed circuit board layout, prototyping, automation and test development. We provide these services across all the industries we serve, but lead with engineering to manufacturing solutions primarily in regulated industries such as medical, complex industrials, aerospace and defense.

Our core strength lies in our ability to provide concept-to-production solutions in support of our customers. Our global manufacturing presence increases our ability to respond to our customers’ needs by providing accelerated time-to-market and time-to-volume production of high-quality products – especially for complex products with lower volume and higher mix in regulated markets. These capabilities enable us to build strong strategic relationships with our customers and to become an integral part of their operations.

Our customers often face challenges in designing supply chains, planning demand, procuring materials and managing their inventories efficiently due to fluctuations in their customer demand, product design changes, short product life cycles and component price fluctuations. We employ enterprise resource planning (ERP) systems and lean manufacturing principles to manage the procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when-needed basis. We are a significant purchaser of electronic components and other raw materials and can capitalize on the economies of scale associated with our relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply, and return excess components. Our agility and expertise in supply chain management and our relationships with suppliers across the supply chain enable us to help reduce our customers’ cost of goods sold and inventory exposure.

Our global operations include manufacturing facilities in seven countries. Benchmark’s worldwide manufacturing facilities include 1.4 million square feet in our domestic facilities in Alabama, Arizona, California, Minnesota, New Hampshire and Texas; and 2.3 million square feet in our international facilities in China, Malaysia, Mexico, the Netherlands, Romania and Thailand.

We have enhanced our capabilities through acquisitions and through internal expansion:

·         In November 2015, we acquired Secure Communication Systems, Inc. and its subsidiaries (collectively, Secure Technology or Secure) (the Secure Acquisition), a leading provider of customized high-performance electronics, sub-systems, and component solutions for mission critical applications in highly regulated industrial, aerospace and defense markets.

·         In October 2013, we acquired the full-service EMS segment of CTS Corporation (the CTS Acquisition). The CTS Acquisition expanded our portfolio of customers in non-traditional and highly regulated markets and strengthened the depth and scope of our new product express capabilities on the West Coast.

·         In June 2013, we acquired Suntron Corporation (the Suntron Acquisition) to better serve customers in the aerospace and defense industries.

·         In 2011, we acquired facilities and other assets to expand our precision technology capabilities in Penang, Malaysia. This expansion added sheet metal and frames fabrication services and advanced metal joining and grinding services, along with complex mechanical assembly and machining services to our Asia service offerings to complement our full service offerings in the Americas.

We believe our primary competitive advantages are our product design, manufacturing, engineering, testing and supply chain management capabilities provided by a highly skilled team of personnel. We continue to invest in our business to expand our skills and service offerings from direct customer inputs. We have a closed-loop feedback system in place to respond to customer ideas to enhance our future flexible design and manufacturing solutions in support of the full life cycle of their products. These solutions provide accelerated time-to-market, time-to-volume production, and reduced production costs. Working closely with our customers and responding promptly to their needs, we become an integral part of their go-to market planning.

In addition, we believe that a strong focus on human capital through the talent we hire and retain is critical to maintaining our competitiveness. Through our employee survey process, we solicit and act upon feedback to improve our Company and better support our customers in the future. We have taken steps aimed at attracting the best leaders and are accelerating efforts to mentor and develop key leaders for the future.

Our Industry

Outsourcing enables OEMs to concentrate on their core strengths, such as research and development, branding, and marketing and sales. In an outsourcing model, OEMs also benefit from improved efficiencies and reduced production costs, reduced fixed capital investment requirements, improved inventory management, and access to global manufacturing. OEMs continue to turn to outsourcing for these manufacturing benefits in addition to reducing time-to-market and time-to-volume production through utilization of their EMS providers’ product design and engineering services benefits.

Beginning in the 1990s, the EMS industry changed rapidly as an increasing number of OEMs outsourced their manufacturing requirements. In recent years, the number of industries served by EMS providers and their market penetration in certain industries increased, and we believe further growth opportunities exist for EMS providers to penetrate the worldwide manufacturing markets. In 2008, the industry’s revenue declined as a result of significant cutbacks in customers’ production requirements, consistent with overall global economic downturns. Beginning in 2015, the industry has again experienced revenue declines as customers in certain sectors have reduced their production requirements due to global economic uncertainty; however, OEMs have continued to seek the benefits of a product design and outsourced model. While not all industries we serve are experiencing outsourcing growth rates, we believe that under-penetrated outsourcing markets such as medical, industrials (including aerospace and defense), and test & instrumentation will continue to increase outsourcing in the future.

Our Strategy

Our goal is to be the solutions provider of choice to leading OEMs that we perceive offer the greatest potential for profitable growth. To meet this goal, we have implemented the following strategies:

·         Focus on More Complex Products for Customers in Higher-Value Markets. EMS providers serve a wide range of OEMs in different industries, such as consumer electronics, internet-focused businesses and information technology equipment. The product scope ranges from easy-to-assemble, low-cost, high-volume products targeted for the consumer market to complicated, state-of-the-art, mission-critical products. Higher volume manufacturing customers in the more traditional markets of computing and telecommunications often compete on price with short product life cycles and require less value-add from EMS providers. Lower-volume manufacturing customers in the medical, industrial, and test & instrumentation markets are often in highly regulated industries where they are increasingly outsourcing higher value-added services to their EMS providers to meet stringent regulatory and time-to-market requirements. We choose to focus on customers in the traditional markets with more complex requirements and in the higher-value markets where outsourcing growth rates are increasing, product life cycles are longer, and there is a strong match between our capabilities and the needs of these customers. The ability to serve customers in both markets is important to our strategy.

·         Leverage Advanced Technology and Lead with Engineering Solutions. In addition to strengths in manufacturing complex high-density PCBAs, complex mechanical systems, and full systems integration, we offer customers specialized and tailored advanced design solutions. We provide this engineering expertise through our design capabilities in our design centers in the Americas, Europe and Asia. Leading with engineering is important in our strategy to increase sales to customers in our targeted higher-value markets. Through leveraging our advanced technology and engineering solutions, customers can focus on core branding and marketing initiatives while we focus on bringing their products to market efficiently and timely.

·         Maintain and Develop Close, Long-Term Relationships with Customers. Our strategy is to establish long-term relationships with leading OEMs in expanding industries by becoming an integral part of their concept-to-production and full product life cycle requirements. To accomplish this, we rely on our global and local management teams to respond with speed and flexibility to frequently changing customer design

specifications and production requirements. We focus on caring for our customers and insuring that their needs are met and exceeded.

·         Deliver Complete High- and Low-Volume Manufacturing Solutions Globally. OEMs increasingly require a wide range of specialized design engineering and manufacturing services from EMS providers in order to reduce costs and accelerate their time-to-market and time-to-volume production. Building on our integrated engineering and manufacturing capabilities, we offer services from initial product design and test to final product assembly and distribution to OEM customers. Our precision machining and complex mechanical manufacturing, along with our systems integration assembly and direct order fulfillment services allow our customers to reduce product cost and risk of product obsolescence by reducing their total work-in-process and finished goods inventory. These services are available at many of our manufacturing locations. We continue to expand our global capabilities:

-        in 2009, we added precision machining assets and capabilities to provide precision machining, metal joining and complex electromechanical manufacturing services in Arizona, California and Mexico;

-        in 2011, we expanded our precision technologies capabilities in Penang, Malaysia. This expansion added sheet metal and frames fabrication services, advanced metal joining and grinding services, along with complex mechanical assembly and machining services to our Asia service offerings;

-        in 2013, we strengthened our capabilities to better serve the aerospace and defense industries and added depth and scope to our new product express capabilities on the West Coast; and

-        in 2015, we acquired Secure Technology, which designs and produces encrypted and ruggedized communication systems, avionics displays and military-grade components.

These full service capabilities allow us to offer customers the flexibility to move quickly from design and initial product introduction to production and distribution. We offer our customers the opportunity to combine the benefits of low-cost manufacturing (for the portions of their products or systems that can benefit from the use of these geographic areas) with the benefits and capabilities of our higher complexity support in Asia, Europe and the Americas.

·         Continue to Seek Cost Savings and Operational Excellence. We seek to optimize all of our facilities to provide cost-efficient services for our customers. We have a global culture of continuous improvement, sharing best practices and implementing lean principles. We try to optimize the efficiencies of our operations in order to provide efficient solutions to our customers.

·         Pursue Strategic Acquisitions. Our capabilities have continued to grow through acquisitions and we will continue to selectively seek acquisition opportunities. In addition to expanding our global footprint, our acquisitions have enhanced our business in the following ways:

-        enhanced customer growth opportunities;

-        developed strategic relationships;

-        broadened service and solution offerings;

-        provided vertical solutions;

-        diversified into new market sectors; and

-        added experienced management teams.

We believe that growth by selective acquisitions is critical for achieving the scale, flexibility and breadth of customer services required to remain competitive.

Services We Provide

We offer a wide range of design, engineering, automation, test, manufacturing and fulfillment solutions that support our customers’ products from initial concept and design through prototyping, design validation, testing, ramp-to-volume production, worldwide distribution and aftermarket support. We support all of our service offerings with supply chain management systems, superior quality program management and sophisticated information technology systems. Our comprehensive service offerings enable us to provide a complete solution for our customers’ outsourcing requirements. All of our services are supported through a strong quality management system designed to globally provide the process discipline to reliably deliver high quality services, solutions and products to our customers.

Engineering Solutions

Our approach is to coordinate and integrate our concept, design, prototype and other engineering capabilities in support of our customers’ go-to-market and product life cycle requirements. These services strengthen our relationships with our manufacturing customers and attract new customers requiring specialized design and engineering services.

·      New Product Design, Prototype, Testing and Related Engineering. We offer a full spectrum of new product design, automation, test development, prototype and related engineering for projects contracted by our customers who pay for and own the resulting designs in our contract design services business. We employ a proven 7-step process for concept-to-production in our design services model that enables a shorter product development cycle and gives our customers a competitive advantage in time-to-market and time-to-profit. Our multi-disciplined engineering teams provide expertise in a number of core competencies critical to serving OEMs in our target markets, including award-winning industrial design, mechanical and electrical hardware, firmware, software and systems integration and support. We create specifications, designs and quick-turn prototypes, and validate and ramp our customers’ products into high-volume manufacturing.

·          Solution Development, Concept and Design. We also provide our customers a range of solutions designed to their specifications where the customers elect not to own the IP or know-how associated with an integrated hardware solution. These solutions are currently focused on the defense and transportation industries. Often, these solutions begin in our advanced technology organization where we invest in new technologies required to solve problems presented by our customers. We take these solutions from concept through our engineering design and into volume production to fulfill production orders from customers. We have the ability to take existing products and catalog them as building blocks for future designs. Since we retain the solution and own the associated intellectual property, we also have the ability to take an existing solution and create a purpose-optimized version to meet the requirements of additional customers.

·         Custom Testing and Automation Equipment Design and Build. We provide our customers a comprehensive range of custom automated test equipment, functional test equipment, process automation and replication solutions. We have expertise in tooling, testers, equipment control, systems planning, automation, floor control, systems integration, replication and programming. Our custom functional test equipment, process automation and replication solutions are available to our customers as part of our full-service product design and manufacturing solutions package or on a stand-alone basis for products designed and manufactured elsewhere. We also provide custom test equipment and automation system solutions to OEMs, which pay for and own the designs. Our ability to provide these solutions allows us to capitalize on OEMs’ increasing needs for custom manufacturing solutions and provides an additional opportunity for us to introduce these customers to our comprehensive engineering and manufacturing services.

Manufacturing and Fulfillment Solutions

As OEMs seek to provide greater functionality in smaller products, they increasingly require sophisticated manufacturing technologies and processes. Our investment in advanced manufacturing equipment and process development, as well as our experience in innovative packaging and interconnect technologies, enable us to offer a variety of advanced manufacturing solutions. These packaging and interconnect technologies include:

·      Printed Circuit Board Assembly & Test. We offer a wide range of complex, printed circuit board assembly and test solutions, including printed circuit board assembly, assembly of subsystems, circuitry and functionality testing of printed assemblies, environmental and stress testing and component reliability testing.

·      Flex Circuit Assembly & Test. We provide our customers a wide range of flex circuit assembly and test solutions. We use specialized tooling strategies and advanced automation procedures to minimize circuit handling and ensure that consistent processing parameters are maintained throughout the assembly process.

·      Systems Assembly & Test. We work with our customers to develop product-specific test strategies. Our test capabilities include manufacturing defect analysis, in-circuit tests to check the circuitry of the board and functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either custom design test equipment and software ourselves or use test equipment and software provided by our customers. We also offer our own internally designed functional test solutions for cost effective and flexible test solutions, and provide environmental stress tests of assemblies of boards or systems

·      Failure Analysis. We offer an array of analytical solutions and expertise to challenging issues faced by our customers. This includes focused techniques for failure mode, failure mechanism, and root cause determination. Specialized analytical skill sets associated with electrical, mechanical, and metallurgical disciplines are used in conjunction with a vast array of equipment such as ion chromatography, x-ray florescence, and scanning electron microscopy. Our state-of-the-art lab facilities provide customers with detailed reporting and support in an unbiased, timely and cost-effective manner. Mastering emerging technologies coupled with a complete understanding of potential failure mechanisms positions us to exceed customer expectations and maintain our technological diversity.

·      Direct Order Fulfillment. We provide direct order fulfillment for some of our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management, including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations and varying production quantities, including single units. Our direct order fulfillment services include build-to-order (BTO) and configure-to-order (CTO) capabilities. BTO involves building a complete system in real-time to a highly customized configuration ordered by the OEM’s end customer. CTO involves configuring systems to an end customer’s specifications at the time the product is ordered. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 2- to 24-hour turnaround time for BTO and CTO. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems, and processing of customer returns.

·      Aftermarket Non-Warranty Services. We provide our customers a range of aftermarket non-warranty services, including repair, replacement, refurbishment, remanufacturing, exchange, systems upgrade and spare part manufacturing throughout a product’s life cycle. These services are tracked and supported by specific information technology systems that can be tailored to meet our customers’ individual

requirements.

·      Value-Added Support Systems. We support our engineering, manufacturing, distribution and aftermarket support services with an efficient supply chain management system and a superior quality management program. Our value-added support services are primarily implemented and managed through web-based information technology systems that enable us to collaborate with our customers throughout all stages of the engineering, manufacturing and order-fulfillment processes.

·      Supply Chain Management. We offer full end-to-end supply chain design, inventory-management and volume-procurement capabilities to provide assurance of supply, optimized cost, and reduce total cycle time. Our materials strategy focuses on leveraging our procurement volume Company-wide while providing local execution for maximum flexibility at the division level. We employ a full complement of electronic data interchange transactions with our suppliers to coordinate forecasts, orders, reschedules, and inventory and component lead times. Our enterprise resource planning systems provide product and production information to our supply chain management, engineering change management and floor control systems. Our information systems include a proprietary module that controls serialization, production and quality data for all of our facilities around the world using state-of-the-art statistical process control techniques for continuous process improvements. To enhance our ability to rapidly respond to changes in our customers’ requirements by effectively managing changes in our supply chain, we utilize web-based interfaces and real-time supply chain management software products, which allow for scaling operations to meet customer needs, shifting capacity in response to product demand fluctuations, reducing materials costs and effectively distributing products to our customers or their end-customers.

·      PCBA Manufacturing Technologies. We offer our customers expertise in a wide variety of traditional and advanced manufacturing technologies. Our technical expertise supports printed circuit board assembly, sub-assembly manufacturing, and finished goods assembly. More advanced systems require complex systems integration and order fulfillment that require advanced engineering skills and equipment to develop and maintain.

We also provide our customers with a comprehensive set of PCBA manufacturing technologies and solutions, which include:

·      Advanced Surface Mount;

·      Fine Pitch Ball Grid Array and Land Grid Array;

·      Package on Package;

·      Flip Chip;

·      Chip On Board/Wire Bonding;

·      Compliant Pin and Pin Through Hole Technology;

·      In-Circuit Test;

·      Board Level Functional Test; and

·      Stress Test.

We also provide specialized solutions in support of our customers’ components, products and systems, which include:

·      Conformal Coating;

·      Ultrasonic Welding;

·      Complex Final Assembly;

·      Fluidics Assembly;

·      Splicing and Connectorization for Optical Applications;

·      Hybrid Optical/Electrical Printed Circuit Board Assembly and Testing; and

·      Sub-Micron Alignment of Optical Sub-Assemblies.

·      Component Engineering Services. We help customers deal with evolving international environmental laws and regulations on content, packaging, labeling and similar issues concerning the environmental impact of their products including: “RoHS” (EU Directive 2011/65/EC on Restriction of certain Hazardous Substances); “WEEE” (EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment); “REACH” (EC Regulation No 1907/2006 on Registration, Evaluation and Authorization of Chemicals); EU Member States’ Implementation of the foregoing; and the People’s Republic of China (PRC) Measures for Administration of the Pollution Control of Electronic Information Products of 2006. Manufacturing sites in the Americas, Asia and European regions are certified in both water soluble and no-clean processes and are currently producing products that are compliant with these environmental laws and regulations.

·      Precision Machining Technologies. We provide precision machining, metal joining and complex electromechanical manufacturing services and use the following precision technologies:

·      Complex Small / Medium / Large Computer Numerical Controlled Machining;

·      Precision Multi-Axis Grinding of Aerospace Engine Blades, Vanes and Nozzles;

·      Precision Grinding of Mass Spectrometer Components;

·      Sinker Electrical Discharge Machining;

·      Turnkey Precision Clean Room Module Assembly and Functional Test;

·      Major Electromechanical Assemblies;

·      Advanced Metal Joining; and

·      Sheet metal and frame manufacturing.

·      Precision Electromechanical Assembly and Test. We offer a full spectrum of precision subsystem and system integration services. These include assembly, configuration and testing of industrial equipment, telecommunication equipment, complex computers and related products for business enterprises, medical devices, and testing and instrumentation products. We design, develop and build product-specific manufacturing processes utilizing manual, mechanized or fully automated lines to meet our customers’ product volume and quality requirements. All of our assembly and test processes are developed according to customer specifications and replicated within our facilities. We also provide product life cycle testing services, such as Ongoing Reliability Testing where units are continuously cycled for extended testing while monitoring for early-life failures.

Marketing and Customers

We market our services and solutions primarily through a direct sales force and, in select markets, independent marketing representatives. In addition, our divisional and executive management teams are an integral part of our sales and marketing teams. We generally enter into supply arrangements with our customers. These arrangements, similar to purchase orders, generally govern the conduct of our business with customers relating to, among other things, the design and manufacture of products that in some cases were previously produced by the customer. The arrangements also generally identify the specific products to be designed and manufactured, quality and production requirements, product pricing and materials management. There can be no assurance that at any time these arrangements will remain in effect or be renewed, but we focus intently on customer care in an effort to anticipate and meet the current and future needs of our customers.

Our key customer accounts are supported by a dedicated team, including program managers and global account managers who are directly responsible for account management. Global account managers coordinate activities across divisions to effectively satisfy customer requirements and have direct access to our executive management to quickly address customer concerns. Local program managers and customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure. In addition, our executive management is heavily involved in customer relations and devotes significant attention to broadening existing and developing new customer relationships.

The following table sets forth the percentages of our sales by sector for 2015,  2014  and 2013. 

Seasonality

Seasonality in our business has historically been driven by customer and product mix, particularly the industries that our customers serve. Although we have historically experienced higher sales during the fourth quarter, this pattern does not repeat itself every year. In addition, we typically experience our lowest sales volume in the first quarter of each year.

Suppliers

We maintain a network of suppliers of components and other materials used in our operations. We procure components when a purchase order or forecast is received from a customer and occasionally utilize components or other materials for which a supplier is the single source of supply. If any of these single-source suppliers were unable to provide these materials, a shortage of components could temporarily interrupt our operations and lower our profits until an alternate component could be identified and qualified for use. Although we experience component shortages and longer lead times for various components from time to time, we have generally been able to reduce the impact of component shortages by working with customers to reschedule deliveries, with suppliers to provide the needed components using just-in-time inventory programs, or by purchasing components at somewhat higher prices from distributors rather than directly from manufacturers. In addition, by developing long-term relationships with suppliers, we have been better able to minimize the effects of component shortages compared to manufacturers without such relationships. The goal of these procedures is to reduce our inventory risk.

Backlog

We had sales backlog of approximately $1.7 billion at December 31, 2015, as compared to the 2014 year-end backlog of $1.6 billion. Backlog consists of purchase orders received, including, in some instances, forecast requirements released for production under customer contracts. Although we expect to fill substantially all of our year-end backlog during 2016, we do not currently have long-term agreements with all of our customers, and customer orders can be canceled, changed or delayed. The timely replacement of canceled, changed or delayed orders with orders from new customers cannot be assured, nor can there be any assurance that any of our current customers will continue to utilize our services. Because of these factors, our backlog is not a meaningful indicator of future financial results.

Competition

The services we provide are available from many independent sources as well as from the in-house manufacturing capabilities of current and potential customers. Our competitors include Celestica Inc., Flextronics International Ltd., Hon Hai Precision Industry Co., Ltd., Jabil Circuit, Inc., Plexus Corp and Sanmina Corporation, who may have substantially greater financial, manufacturing or marketing resources than we do. We believe that the principal competitive factors in our targeted markets are engineering solutions capabilities, product quality, flexibility, cost

and timeliness in responding to design and schedule changes, reliability in meeting product delivery schedules, pricing, technological sophistication and geographic location.

In addition, original design manufacturers (ODMs) that provide design and manufacturing services to OEMs have significantly increased their share of outsourced manufacturing services provided to OEMs in traditional markets, such as computing and telecommunication. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

Sustainability

Benchmark is committed to being “sustainable”. Being sustainable describes our long-term approach to social, economic and environmental goals to contribute to a more sustained world consistent with our business objectives. Our sustainability priorities include:

·         upholding the principle of human rights and observing fair labor practices within our organization and our supply chain;

·         protecting the environment by conserving energy and natural resources and avoiding pollution through appropriate management technology and practices;

·         ensuring ethical organizational governance; and

·         observing fair, transparent and accountable operating practices.

All Benchmark manufacturing facilities are either currently certified or undergoing certification to ISO 14001. Benchmark endorsed the Electronics Industry Citizenship Coalition Code of Conduct and flows specific requirements to our supply chain through our contracts, Supplier Assurance Manual and Supplier Code of Conduct.

Governmental Regulation

Our operations, and the operations of businesses that we acquire, are subject to foreign, federal, state and local regulatory requirements relating to security clearance, trade compliance, anticorruption, environmental, waste management, and health and safety matters. We seek to operate in compliance with all applicable requirements. Significant costs and liabilities may arise from these requirements or from new, modified or more stringent requirements, which could affect our earnings and competitive position. In addition, our past, current and future operations, and those of businesses we acquire, may give rise to claims of exposure by employees or the public or to other claims or liabilities relating to environmental, waste management or health and safety concerns.

We periodically generate and temporarily handle limited amounts of materials that are considered hazardous waste under applicable law. We contract for the off-site disposal of these materials and have implemented a waste management program to address related regulatory issues.

Employees

As of December 31, 2015, we employed approximately 10,500 people, of whom approximately 500 were engaged in design and development engineering. None of our domestic employees are represented by a labor union. In certain international locations, our employees are represented by labor unions and by works councils. Some European countries also often have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws. We have never experienced a strike or similar work stoppage, and we believe that our employee and labor relations are good.

Segments and International Operations

We have manufacturing facilities in the Americas, Asia and Europe to serve our customers. Benchmark is operated and managed geographically, and management evaluates performance and allocates resources on a geographic basis. We currently operate outside the United States in China, Malaysia, Mexico, the Netherlands, Romania and Thailand.

During 2015, 2014 and 2013, 5­­0%, 53% and 51%, respectively, of our sales were from our international operations. See Note 9 and Note 13 of Notes to Consolidated Financial Statements in Item 8 of this Report for segment and geographical information.

Available Information

Our website may be viewed at http://www.bench.com.  Reference to our website is for informational purposes only and the information contained therein is not incorporated by reference into this annual report. We make available free of charge through our internet website our filings with the Securities and Exchange Commission (SEC), including our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after electronically filing such material with, or furnishing it to, the SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC’s website at http://www.sec.gov or to read and copy at the SEC Public Reference Room located at 100 F Street NE, Washington, DC 20549. Information can be obtained on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

Item 1A.   Risk Factors.

The following risk factors should be read carefully when reviewing the Company’s business, the forward-looking statements contained in this Report, and the other statements the Company or its representatives make from time to time. Any of the following factors could materially and adversely affect the Company’s business, operating results, financial condition and the actual results of the matters addressed by the forward-looking statements.

Adverse market conditions could reduce our future sales and earnings per share.

Uncertainty over the erosion of global consumer confidence amidst concerns about volatile energy costs, geopolitical issues, the availability and cost of credit, declining asset values, inflation, rising unemployment, and the stability and solvency of financial institutions, financial markets, businesses, and sovereign nations has slowed global economic growth and resulted in recessions in many countries, including in the United States, Europe and certain countries in Asia over the past several years. The economic recovery of recent years is fragile and recessionary conditions may return. Any of these potential negative economic conditions may reduce demand for our customers’ products and adversely affect our sales. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows.

In addition to our customers or potential customers reducing or delaying orders, a number of other negative effects on our business could materialize, including the insolvency of key suppliers, which could result in production delays, shorter payment terms from suppliers due to reduced availability of credit default insurance in the market, the inability of customers to obtain credit, and the insolvency of one or more customers. Any of these effects could impact our ability to effectively manage inventory levels and collect receivables, increase our need for cash, and decrease our net revenue and profitability.

We are exposed to general economic conditions, which could have a material adverse impact on our business, operating results and financial condition.

Our business is cyclical and has experienced economic and industry downturns. If economic conditions or demand for our customers’ products deteriorate, we may experience a material adverse impact on our business, operating results and financial condition.

In cases where the evidence suggests a customer may not be able to satisfy its obligation to us, we establish reserves in an amount we determine appropriate for the perceived risk. There can be no assurance that our reserves will be adequate. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to

make payments, additional receivable and inventory reserves may be required and restructuring charges may be incurred.

Shortages or price increases of components specified by our customers would delay shipments and adversely affect our profitability.

Substantially all of our sales are derived from manufacturing services in which we purchase components specified by our customers. In the past, supply shortages have substantially curtailed production of all assemblies using a particular component and industry-wide shortages of electronic components, particularly of memory and logic devices, have occurred. For example, the 2011  earthquake and tsunami in Japan disrupted the global supply chain for certain components manufactured in Japan that were incorporated in the products we manufactured, and the 2011 Thailand flood had a similar impact. Any such component shortages may result in delayed shipments, which could have an adverse effect on our profit margins. Also, because of the continued increase in demand for surface mount components, we anticipate component shortages and longer lead times for certain components to occur from time to time. Also, we may bear the risk of component price increases that occur between periodic re-pricings of product during the term of a customer contract. Accordingly, certain component price increases could adversely affect our gross profit margins.

We are dependent on the success of our customers. When our customers experience a downturn in their business, we may be similarly affected.

We are dependent on the continued growth, viability and financial stability of our customers. Our customers are OEMs of:

·      industrial equipment;

·      telecommunication equipment;

·      computers and related products for business enterprises;

·      medical devices; and

·      testing and instrumentation products.

These industries are subject to rapid technological change, vigorous competition, short product life cycles and consequent product obsolescence. When our customers are adversely affected by these factors, we may be similarly affected.

The loss of a major customer would adversely affect us.

Historically, a substantial percentage of our sales have been made to a small number of customers. The loss of a major customer, if not replaced, would adversely affect us. Sales to our ten largest customers represented 47%, 50% and 53% of our sales in 2015, 2014  and 2013, respectively. In 2015, sales to International Business Machines Corporation represented 11% of our sales. Our future sales are dependent on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us.

We expect to continue to depend on the sales to our largest customers, and any material delay, cancellation or reduction of orders from these customers or other significant customers would have a material adverse effect on our results of operations. In addition, we generate significant accounts receivable in connection with providing manufacturing services to our customers. If one or more of our customers were to become insolvent or otherwise unable to pay for the manufacturing services provided by us, our operating results and financial condition would be adversely affected.

Most of our customers do not commit to long-term production schedules, which makes it difficult for us to schedule production and achieve maximum efficiency of our manufacturing capacity.

The volume and timing of sales to our customers vary due to:

·      changes in demand for their products;

·      their attempts to manage their inventory;

·      design changes;

·      changes in their manufacturing strategies; and

·      acquisitions of, or consolidations among, customers.

Due in part to these factors, most of our customers do not commit to firm production schedules for more than one quarter in advance. Our inability to forecast the level of customer orders with certainty makes it difficult to schedule production and maximize utilization of manufacturing capacity. In the past, we have been required to increase staffing and other expenses in order to meet the anticipated demand of our customers. Anticipated orders from many of our customers have, in the past, failed to materialize or delivery schedules have been deferred as a result of changes in our customers’ business needs, thereby adversely affecting our results of operations. On other occasions, our customers have required rapid increases in production, which have placed an excessive burden on our resources. Such customer order fluctuations and deferrals have had a material adverse effect on us in the past, and may again in the future. A business downturn resulting from any of these external factors could have a material adverse effect on our operating income. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this Report.

Our customers may cancel their orders, change production quantities, delay production or change their sourcing strategies.

EMS providers must provide increasingly rapid product turnaround for their customers. We generally do not obtain firm, long-term purchase commitments from our customers, and we continue to experience reduced lead-times in customer orders. Customers may cancel their orders, change production quantities, delay production or change their sourcing strategy for a number of reasons. The degree of success or failure of our customers’ products in the market affects our business. Cancellations, reductions, delays or changes in the sourcing strategy by a significant customer or by a group of customers could negatively impact our operating income.

In addition, we make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs, capital expenditures and other resource requirements, based on our estimate of customer requirements. The short-term nature of our customers’ commitments and the possibility of rapid changes in demand for their products impede our ability to accurately estimate the future requirements of those customers.

On occasion, customers require rapid increases in production, which can stress our resources and reduce operating margins. In addition, because many of our costs and operating expenses are relatively fixed, a reduction in customer demand can harm our gross profits and operating results. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this Report.

We may encounter significant delays or defaults in payments owed to us by customers for products we have manufactured or components that are unique to particular customers.

We structure our agreements with customers to mitigate our risks related to obsolete or unsold inventory. However, enforcement of these contracts may result in material expense and delay in payment for inventory. If any of our significant customers become unable or unwilling to purchase such inventory, our business may be materially harmed. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this Report.

Our international operations may be subject to certain risks.

During 2015, 2014  and 2013, 50%, 53% and 51%, respectively, of our sales were from our international operations. These international operations are subject to a number of risks, including:

·      difficulties in staffing and managing foreign operations;

·      coordinating communications and logistics across geographic distances and multiple time zones;

·      less flexible employee relationships, which complicate meeting demand fluctuations and can be difficult and expensive to terminate;

·      political and economic instability (including acts of terrorism and outbreaks of war), which could impact our ability to ship and/or receive product;

·      changes in government policies, regulatory requirements and laws, which could impact our business;

·      longer customer payment cycles and difficulty collecting accounts receivable;

·      export duties, import controls and trade barriers (including quotas);

·      governmental restrictions on the transfer of funds;

·      risk of governmental expropriation of our property;

·      burdens of complying with a wide variety of foreign laws and labor practices, including various and changing minimum wage regulations;

·      fluctuations in currency exchange rates, which could affect component costs, local payroll, utility and other expenses; and

·      inability to utilize net operating losses incurred by our foreign operations to reduce our U.S. income taxes.

In addition, several of the countries where we operate have emerging or developing economies, which may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks. Additionally, some of our operations are in developing countries. Certain events, including natural disasters, can impact the infrastructure of a developing country more severely than they would impact the infrastructure of a developed country. A developing country can also take longer to recover from such events, which could lead to delays in our ability to resume full operations. These factors may harm our results of operations, and any measures that we may implement to reduce the effect of volatile currencies and other risks of our international operations may not be effective. In our experience, entry into new international markets requires considerable management time as well as start-up expenses for market development, hiring and establishing office facilities before any significant revenues are generated. As a result, initial operations in a new market may operate at low margins or may be unprofitable.

Additionally, certain foreign jurisdictions, as well as the U.S. government, restrict the amount of cash that can be transferred to the U.S or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our operations in the United States, we may incur significant penalties and/or taxes to repatriate these funds.

Another significant legal risk resulting from our international operations is compliance with the U.S. Foreign Corrupt Practices Act (FCPA). In many foreign countries, particularly in those with developing economies, it may be a local custom that businesses operating in such countries engage in business practices that are prohibited by the FCPA, other U.S. laws and regulations, or similar laws of host countries and related anti-bribery conventions. Although we have implemented policies and procedures designed to comply with the FCPA and similar laws, there can be no assurance that all of our employees, agents, or those companies to which we outsource certain of our business operations, will not take actions in violation of our policies. Any such violation, even if prohibited by our policies, could have a material adverse effect on our business.

We operate in a highly competitive industry; if we are not able to compete effectively in the EMS industry, our business could be adversely affected.

We compete against many providers of electronics manufacturing services. Some of our competitors have substantially greater resources and more geographically diversified international operations than we do. Our competitors include large independent manufacturers such as Celestica Inc., Flextronics International Ltd., Hon Hai Precision Industry Co., Ltd., Jabil Circuit, Inc., Plexus Corp and Sanmina Corporation. In addition, we may in the future encounter competition from other large electronic manufacturers that are selling, or may begin to sell, electronics manufacturing services.

We also face competition from the manufacturing operations of our current and future customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing to EMS providers. In addition, in recent years, ODMs that provide design and manufacturing services to OEMs, have significantly increased their share of outsourced manufacturing services provided to OEMs in several markets, such as notebook and desktop computers, personal computer motherboards, and consumer electronic products. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

During periods of recession in the electronics industry, our competitive advantages in the areas of quick turnaround manufacturing and responsive customer service may be of reduced importance to electronics OEMs, who may become more price sensitive. We may also be at a competitive disadvantage with respect to price when compared to manufacturers with lower cost structures, particularly those with more offshore facilities located where labor and other costs are lower.

We experience intense competition, which can intensify further as more companies enter the markets in which we operate, as existing competitors expand capacity and as the industry consolidates. The availability of excess manufacturing capacity at many of our competitors creates intense pricing and competitive pressure on the EMS industry as a whole and Benchmark in particular. To compete effectively, we must continue to provide technologically advanced manufacturing services, maintain strict quality standards, respond flexibly and rapidly to customers’ design and schedule changes and deliver products globally on a reliable basis at competitive prices. Our inability to do so could have an adverse effect on us.

The integration of acquired operations may pose difficulties for us.

Our capabilities have continued to grow through acquisitions, and we may pursue additional acquisitions over time. These acquisitions involve risks, including:

·      integration and management of the operations;

·      retention of key personnel;

·      integration of purchasing operations and information systems;

·      retention of the customer base of acquired businesses;

·      management of an increasingly larger and more geographically disparate business;

·      the possibility that past transactions or practices may lead to future commercial or regulatory risks; and

·      diversion of management’s attention from other ongoing business concerns.

Our profitability will suffer if we are unable to successfully integrate an acquisition, or if we do not achieve sufficient revenue to offset the increased expenses associated with these acquisitions.

We may experience fluctuations in quarterly results.

Our quarterly results may vary significantly depending on various factors, many of which are beyond our control. These factors include:

·      the volume of customer orders relative to our capacity;

·      customer introduction and market acceptance of new products;

·      changes in demand for customer products;

·      seasonality in demand for customer products;

·      pricing and other competitive pressures;

·      the timing of our expenditures in anticipation of future orders;

·      our effectiveness in managing manufacturing processes;

·      changes in cost and availability of labor and components;

·      changes in our product mix;

·      changes in political and economic conditions; and

·      local factors and events that may affect our production volume, such as local holidays or natural disasters.

Additionally, as is the case with many high technology companies, a significant portion of our shipments typically occur in the last few weeks of a given quarter. Accordingly, sales shifts from quarter to quarter may not be readily apparent until the end of a given quarter, and may have a significant effect on reported results.

Start-up costs and inefficiencies related to new or transferred programs can adversely affect our operating results and such costs may not be recoverable if the new programs or transferred programs are cancelled.

Start-up costs, the management of labor and equipment resources in connection with the establishment of new programs and new customer relationships, and the need to estimate required resources in advance can adversely affect our gross margins and operating results. These factors are particularly evident in the early stages of the life cycle of new products and new programs or program transfers and in the opening of new facilities. These factors also affect our ability to efficiently use labor and equipment. We are currently managing a number of new programs. If any of these new programs or new customer relationships were terminated, our operating results could be harmed, particularly in the short term. We may not be able to recoup these start-up costs or replace anticipated new program revenues.

We may be affected by consolidation in the electronics industry, which could create increased pricing and competitive pressures on our business.

Consolidation in the electronics industry could result in an increase in excess manufacturing capacity as companies seek to close plants or take other steps to increase efficiencies and realize synergies of mergers. The availability of excess manufacturing capacity could create increased pricing and competitive pressures for the EMS industry as a whole and our business in particular. In addition, consolidation could also result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The growth of these large companies, with significant purchasing and marketing power, could also result in increased pricing and competitive pressures for us. Accordingly, industry consolidation could harm our business. We may need to increase our efficiencies to compete and may incur additional restructuring charges.

We are subject to the risk of increased taxes.

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. Our tax position, however, is subject to review and possible challenge by taxing authorities and to possible changes in law. We cannot determine in

advance the extent to which some jurisdictions may assess additional tax or interest and penalties on such additional taxes.

Several countries where we operate allow for tax holidays or provide other tax incentives to attract and retain business. We have obtained holidays or other incentives where available. Our taxes could increase if certain tax holidays or incentives are retracted, or if they are not renewed upon expiration, or tax rates applicable to us in such jurisdictions are otherwise increased. In addition, further acquisitions may cause our effective tax rate to increase. Given the scope of our international operations and our international tax arrangements, proposed changes to the manner in which U.S. based multinational companies are taxed in the U.S. could have a material impact on our financial results and competitiveness.

We are exposed to intangible asset risk; our goodwill may become impaired.

We have recorded intangible assets, including goodwill, in connection with business acquisitions. We are required to assess goodwill and intangible assets for impairment at least on an annual basis and whenever events or circumstances indicate that the carrying value may not be recoverable from estimated future cash flows. A significant and sustained decline in our market capitalization could result in material charges in future periods that could be adverse to our operating results and financial position. As of December 31, 2015, we had $199.3 million in goodwill and $105.0 million of identifiable intangible assets. See Note 1(i) to the Consolidated Financial Statements in Item 8 of this Report.

There are inherent uncertainties involved in estimates, judgments and assumptions used in the preparation of financial statements in accordance with U.S. GAAP. Any changes in estimates, judgments and assumptions could have a material adverse effect on our financial position and results of operations.

The consolidated financial statements included in the periodic reports we file with the SEC are prepared in accordance with accounting principles generally accepted in the United States (U.S. GAAP). The preparation of financial statements in accordance with U.S. GAAP involves making estimates, judgments and assumptions that affect reported amounts of assets (including intangible assets), liabilities and related reserves, revenues, expenses and income. Estimates, judgments and assumptions are inherently subject to change in the future, and any such changes could result in corresponding changes to the amounts of assets, liabilities, revenues, expenses and income. Any such changes could have a material adverse effect on our financial position and results of operations.

Any litigation, even where a claim is without merit, could result in substantial costs and diversion of resources.

In the past, we have been notified of claims relating to various matters including intellectual property rights, contractual matters, labor issues or other matters arising in the ordinary course of business. In the event of any such claim, we may be required to spend a significant amount of money and resources, even where the claim is without merit. Accordingly, the resolution of such disputes, even those encountered in the ordinary course of business, could have a material adverse effect on our business, consolidated financial conditions and results of operations.

Our success will continue to depend to a significant extent on our key personnel.

We depend significantly on our executive officers and other key personnel. The unexpected loss of the services of any one of these executive officers or other key personnel could have an adverse effect on us.

If we are unable to maintain our technological and manufacturing process expertise, our business could be adversely affected.

The market for our manufacturing services is characterized by rapidly changing technology and continuing process development. We are continually evaluating the advantages and feasibility of new manufacturing processes. We

believe that our future success will depend upon our ability to develop and provide manufacturing services which meet our customers’ changing needs. This requires that we maintain technological leadership and successfully anticipate or respond to technological changes in manufacturing processes on a cost-effective and timely basis. Our failure to maintain our technological and manufacturing process expertise could have a material adverse effect on our business.

Our stock price is volatile.

Our common shares have experienced significant price volatility, which may continue in the future. The price of our shares can fluctuate widely in response to a range of factors, including our financial results and changing conditions in the economy generally or in our industry in particular. In addition, stock markets generally experience significant price and volume volatility from time to time which may affect the market price of our shares for reasons unrelated to our performance.

Provisions in our governing documents and state law may make it harder for others to obtain control of our company.

Certain provisions of our governing documents and the Texas Business Organizations Code may delay, inhibit or prevent someone from gaining control of our company through a tender offer, business combination, proxy contest or some other method, even if shareholders might consider such a development beneficial. These provisions include:

·         a provision in our certificate of formation granting the Board of Directors authority to issue preferred stock in one or more series and to fix the relative rights and preferences of such preferred stock;

·         provisions in our bylaws restricting shareholders from acting by less than unanimous written consent and requiring advance notification of shareholder nominations and proposals;

·         a provision in our bylaws restricting anyone, other than the Chief Executive Officer, the President, the Board of Directors or the holders of at least 10% of all outstanding shares entitled to vote, from calling a special meeting of the shareholders;

·         a statutory restriction on the ability of shareholders to take action by less than unanimous written consent; and

·         a statutory restriction on business combinations with some types of interested shareholders.

Compliance or the failure to comply with environmental regulations could cause us significant expense.

We are subject to a variety of federal, state, local and foreign environmental laws and regulations relating to environmental, waste management, and health and safety concerns, including the handling, storage, discharge and disposal of hazardous materials used in or derived from our manufacturing processes. If we or companies we acquire have failed or fail in the future to comply with such laws and regulations, then we could incur liabilities and fines and our operations could be suspended. Such laws and regulations could also restrict our ability to modify or expand our facilities, could require us to acquire costly equipment, or could impose other significant expenditures. In addition, our operations may give rise to claims of property contamination or human exposure to hazardous chemicals or conditions.

Our worldwide operations are subject to local laws and regulations. Over the last several years, we have become subject to the RoHS directive and the Waste Electrical and Electronic Equipment Directive. These directives restrict the distribution of products containing certain substances, including lead, within applicable geographies and require a manufacturer or importer to recycle products containing those substances.

These directives affect the worldwide electronics and electronics components industries as a whole. If we or our customers fail to comply with such laws and regulations, we could incur liabilities and fines and our operations could be suspended.

In addition, as climate change concerns become more prevalent, the U.S. and foreign governments have sought to limit the effects of any such changes. This increasing governmental focus on climate change may result in new environmental regulations that may negatively affect us, our suppliers and our customers. This could cause us to incur additional direct costs or obligations in complying with any new environmental regulations, as well as increased indirect costs resulting from our customers, suppliers or both incurring additional compliance costs that get passed on to us. These costs may adversely impact our operations and financial condition.

Our business may be adversely impacted by geopolitical events.

As a global business, we operate and have customers located in many countries. Geopolitical events such as terrorist acts may affect the overall economic environment and negatively impact the demand for our customers’ products or our ability to ship or receive products. As a result, customer orders may be lower and our financial results may be adversely affected.

Our business may be adversely impacted by natural disasters.

Some of our facilities, including our corporate headquarters, are located in areas that may be impacted by hurricanes, earthquakes, water shortages, tsunamis, floods, typhoons, fires, extreme weather conditions and other natural or manmade disasters. Our insurance coverage with respect to natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate, or may not continue to be available at commercially reasonable rates and terms. For example, we have been unable to renew or otherwise obtain adequate cost-effective flood insurance to cover assets at our facilities in Thailand as a result of the flooding that occurred in 2011. We continue to monitor the insurance market in Thailand. In the event we were to experience a significant uninsured loss in Thailand or elsewhere, it could have a material adverse effect on our business, financial condition and results of operations.

In addition, some of our facilities possess certifications necessary to work on specialized products that our other locations lack. If work is disrupted at one of these facilities, it may be impractical, or we may be unable, to transfer such specialized work to another facility without significant costs and delays. Thus, any disruption in operations at a facility possessing specialized certifications could adversely affect our ability to provide products and services to our customers, and thus negatively affect our relationships and financial results.

Our level of indebtedness may limit our flexibility in operating our business and reacting to changes in our business or the industry in which we operate or prevent us from making payments on our indebtedness or obtaining additional financing.

We have a significant amount of indebtedness. As of December 31, 2015, our total outstanding indebtedness (excluding unamortized debt issuance costs) was $238.9 million, substantially all of which represented outstanding borrowings under our $230.0 million term loan facility (the Term Loan). Our level of indebtedness could have important consequences. For example, it could:

·         increase our vulnerability to general adverse economic and industry conditions;

·         impair our ability to obtain additional debt or equity financing in the future for working capital, capital expenditures, acquisitions or other purposes;

·         require us to dedicate a material portion of our cash flows from operations to the payment of principal and interest on our indebtedness, thereby reducing the availability of our cash flows to fund working capital needs, capital expenditures, acquisitions and other purposes;

·         expose us to the risk of increased interest rates since the Term Loan has a variable rate;

·         limit our flexibility in planning for, or reacting to, changes in our business or industry;

·         place us at a disadvantage compared to our competitors that have less indebtedness; and

·           make it more difficult for us to satisfy our debt obligations.

Any of these risks could materially impact our ability to fund our operations or limit our ability to expand our business, which could have a material adverse effect on our business, financial condition and results of operations.

We may be exposed to interest rate fluctuations.

We have exposure to interest rate risk on our outstanding borrowings under our variable rate credit agreement. These borrowings’ interest rates are based on the spread, at our option, over the London interbank offered rate as administered by the ICE Benchmark Administration (LIBO), the bank’s prime rate or the federal funds rate. We are also exposed to interest rate risk on our invested cash balances.

Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations. Additionally, changes in securities laws and regulations have increased, and are likely to continue to increase, our operating costs.

We prepare our financial statements in conformity with U.S. GAAP. These principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the American Institute of Certified Public Accountants, the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions that are completed before a change is announced. Changes to those rules or the questioning of how we interpret or implement those rules may have a material adverse effect on our reported financial results or on the way we conduct business. For example, although not yet currently required, we could be required to adopt International Financial Reporting Standards, which differ from U.S. GAAP.

In addition, in connection with our Section 404 certification process, we may identify from time to time deficiencies in our internal controls. Any material weakness or deficiency in our internal controls over financial reporting could increase the likelihood that a material misstatement or lack of disclosure within the annual or interim financial statements will not be prevented or detected. Adverse publicity related to the disclosure of a material weakness or deficiency in internal controls over financial reporting could have a negative impact on our reputation, business and stock price.

Finally, corporate governance, public disclosure and compliance practices continue to evolve based upon continuing legislative action, agency rulemaking and stockholder advisory group policies. As a result, the number of rules and regulations applicable to us may increase, which would also increase our legal and financial compliance costs and the amount of time management must devote to compliance activities. For example, the Dodd-Frank Wall Street Reform and Consumer Protection Act contains provisions to improve transparency and accountability concerning the supply of certain minerals originating from the Democratic Republic of Congo (DRC) and adjoining countries that are believed to be benefitting armed groups. As a result, the SEC adopted new due diligence, disclosure and reporting requirements for companies which manufacture products that include components containing such minerals, regardless of whether the minerals are mined in the DRC or adjoining countries. These requirements may decrease the acceptable sources of supply of such minerals, increase their cost and disrupt our supply chain if we need to obtain components from different suppliers. Since we manufacture products containing such minerals for our customers, we are required to comply with these rules. The compliance process may become time-consuming and costly. Failure to comply with this new regulation could result in additional costs (including fines and penalties) as well as affect our reputation. Increasing regulatory burdens could also make it more difficult for us to attract and retain members of our board of directors, particularly to serve on our audit committee, and executive officers in light of an increase in actual or perceived workload and liability for serving in such positions.

Energy price increases may negatively impact our results of operations.

Certain of the components that we use in our manufacturing activities are petroleum-based. In addition, we, along with our suppliers and customers, rely on various energy sources (including oil) in our transportation activities. While significant uncertainty exists about the future levels of energy prices, a significant increase is possible. Increased energy prices could cause an increase to our raw material costs and transportation costs. In addition, increased transportation costs of certain of our suppliers and customers could be passed along to us. We may not be able to increase our product prices enough to offset these increased costs. In addition, any increase in our product prices may reduce our future customer orders and profitability.

Introducing programs requiring implementation of new competencies, including new process technology within our mechanical operations, could affect our operations and financial results.

The introduction of programs requiring implementation of new competencies, including new process technology within our mechanical operations, presents challenges in addition to opportunities. Deployment of such programs may require us to invest significant resources and capital in facilities, equipment and/or personnel. We may not meet our customers’ expectations or otherwise execute properly or in a cost-efficient manner, which could damage our customer relationships and result in remedial costs or the loss of our invested capital and anticipated revenues and profits. In addition, there are risks of market acceptance and product performance that could result in less demand than anticipated and our having excess capacity. The failure to ensure that our agreed terms appropriately reflect the anticipated costs, risks and rewards of such an opportunity could adversely affect our profitability. If we do not meet one or more of these challenges, our operations and financial results could be adversely affected.

If our manufacturing processes and services do not comply with applicable regulatory requirements, or if we manufacture products containing design or manufacturing defects, demand for our services may decline and we may be subject to liability claims.

We manufacture and design products to our customers’ specifications, and, in some cases, our manufacturing processes and facilities may need to comply with applicable regulatory requirements. For example, medical devices that we manufacture or design, as well as the facilities and manufacturing processes that we use to produce them, are regulated by the U.S. Food and Drug Administration and non-U.S. counterparts of this agency. Similarly, items we manufacture for customers in the aerospace and defense industries, as well as the processes we use to produce them, are regulated by the Department of Defense and the Federal Aviation Authority, which have increased their focus and penalties related to counterfeit materials. In addition, our customers’ products and the manufacturing processes or documentation that we use to produce them often are highly complex. As a result, products that we manufacture may at times contain manufacturing or design defects, and our manufacturing processes may be subject to errors or not be in compliance with applicable statutory and regulatory requirements. Defects in the products we manufacture or design, whether caused by a design, manufacturing or component failure or error, or deficiencies in our manufacturing processes, may result in delayed shipments to customers or reduced or cancelled customer orders. If these defects or deficiencies are significant, our business reputation may also be damaged. The failure of the products that we manufacture or our manufacturing processes and facilities to comply with applicable statutory and regulatory requirements may subject us to legal fines or penalties and, in some cases, require us to shut down or incur considerable expense to correct a manufacturing process or facility. In addition, these defects may result in liability claims against us or expose us to liability to pay for the recall of a product. The magnitude of such claims may increase as we expand our medical and aerospace and defense manufacturing services, as defects in medical devices and aerospace or defense systems could seriously harm or kill users of these products and others. Even if our customers are responsible for the defects, they may not, or may not have resources to, assume responsibility for any costs or liabilities arising from these defects, which could expose us to additional liability claims.

Our financial results depend, in part, on our ability to perform on our U.S. government contracts, which are subject to uncertain levels of funding, timing and termination.

We provide services as both a prime contractor and subcontractor for the U.S government. Consequently, a portion of our financial results depend on our performance under our U.S. government contracts. Delays, cost overruns or product failures in connection with one or more contracts, could lead to their termination and negatively impact our results of operations, financial condition or liquidity. We can give no assurance that we would be awarded new contracts to offset the revenues lost as a result of such a termination.

U.S. government programs require congressional appropriations, which are typically made for a single fiscal year even though a program may extend over several years. Programs often are only partially funded, and additional funding requires further congressional appropriations. The programs in which we participate compete with other programs for consideration and funding during the budget and appropriations process, which can be impacted by shifting and often competing political priorities.

Our government contracts often involve the development, application and manufacture of advanced defense and technology systems and products aimed at achieving challenging goals. New technologies used for these contracts may be untested or unproven and product requirements and specifications may be modified. Consequently, technological and other performance difficulties may cause delays, cost overruns or product failures. Moreover, there can be no assurance that amounts we spend to develop new products or solutions to compete for a government contract will be recovered since we may not be awarded the contract.

Contracting on government programs is subject to significant regulation, including rules related to bidding, billing and accounting kickbacks and false claims, and any non-compliance could subject us to fines and penalties or debarment.

Like all government contractors, we could become subject to risks associated with this contracting. These risks include substantial civil and criminal fines and penalties if we were to fail to follow procurement integrity and bidding rules or cost accounting standards, employ improper billing practices, receive or pay kickbacks or file false claims. We have been, and expect to continue to be, subjected to audits and investigations by U.S. and foreign government agencies and authorities. The failure to comply with the terms of our government contracts could result in progress payments being withheld, our suspension or debarment from future government contracts or harm to our business reputation.

Customer relationships with emerging companies may present more risks than with established companies.

Customer relationships with emerging companies present special risks because such companies do not have an extensive product history. As a result, there is less demonstration of market acceptance of their products, making it harder for us to anticipate needs and requirements than with established customers. In addition, due to the economic environment, additional funding for such companies may be more difficult to obtain and these customer relationships may not continue or materialize to the extent we planned or we previously experienced. This tightening of financing for start-up customers, together with many start-up customers’ lack of prior operations and unproven product markets increase our credit risk, especially in trade accounts receivable and inventories. Although we perform ongoing credit evaluations of our customers and adjust our allowance for doubtful accounts receivable for all customers, including start-up customers, based on the information available, these allowances may not be adequate. This risk may exist for any new emerging company customers in the future.

We are subject to breach of our security systems.

We have implemented security systems to secure our physical facilities and protect our confidential information, as well as that of our customers and suppliers. Information technology plays an ever-increasing role in today’s business; we maintain some of our information systems, but also rely on third parties for a portion of our needs. The recent successes of sophisticated hackers have been well publicized and, despite our efforts, we are subject to breach of security systems, which could result in unauthorized access to our facilities and the information we are trying to protect. If unauthorized parties gain physical access to one of our facilities or electronic access to our information systems, or if information is misdirected, lost or stolen during transmission or transport, any theft or misuse of such information could result, among other things, in unfavorable publicity, governmental inquiry and oversight, difficulty in marketing our services, allegations of contractual breach, litigation by affected parties and possible financial obligations for damages related to the theft or misuse of the information, any of which could have a material adverse effect on our profitability and cash flow. In addition, we rely on our information systems to run our business; despite our efforts to create appropriate redundancies and ensure continuous information flow, even simple failures in these systems resulting from  natural disasters or facility damage can lead to supply or production interruptions that result in lost profits, contractual penalties and reputational damage.

The risk of uninsured losses will be borne by Benchmark.

As a result of the massive flooding in the Fall of 2011, we have been unable to renew or otherwise obtain cost-effective flood insurance to adequately cover assets at our facilities in Thailand. We continue to monitor the insurance market in Thailand. We maintain insurance on all our properties and operations—including our assets in Thailand—for risks and in amounts customary in the industry. While such insurance includes general liability, property & casualty, and directors & officers liability coverage, not all losses are insured, and we retain certain risks of loss through deductibles, limits and self-retentions. In the event we were to experience a significant uninsured loss in Thailand or elsewhere, it could have a material adverse effect on our business, financial condition and results of operations.

Item 1B.  Unresolved Staff Comments.

None.

Item 2.  Properties .

Our customers market numerous products throughout the world and therefore need to access manufacturing services on a global basis. To enhance our EMS offerings, we seek to locate our facilities either near our customers and our customers’ end markets in major centers for the electronics industry or, where appropriate, in lower cost locations. Many of our plants located near customers and their end markets are focused primarily on final system assembly and test, while plants located in lower cost areas are engaged primarily in less complex component and subsystem manufacturing and assembly.

The following chart summarizes the approximate square footage of our principal manufacturing facilities by country:

Our principal manufacturing facilities consist of 1.9 million square feet in facilities that we own, with the remaining 1.8 million square feet in leased facilities whose terms expire between 2016 and 2021.We lease other facilities with a total of 37,000 square feet dedicated to engineering, sales and procurement services. We also have 99,000 square feet of space in a leased facility that is currently not being used. We are currently attempting to sublease this facility.

Item 3.  Legal Proceedings.

We are involved in various legal actions arising in the ordinary course of business. In the opinion of management, the ultimate disposition of these matters will not have a material adverse effect on our consolidated financial position or results of operations.

Item 4.  Mine Safety Disclosures.

Not applicable.

Item 5.  Market for Registrant’s Common Equity, Related Shareholder Matters and Issuer Purchases of Equity Securities.

Our common shares are listed on the New York Stock Exchange under the symbol “BHE.” The following table shows the high and low sales prices for our common shares as reported on the New York Stock Exchange for the quarters (or portions thereof) indicated.

The last reported sale price of our common shares on February 25, 2016, as reported by the New York Stock Exchange, was $21.72. There were approximately 700 record holders of our common shares as of February 25, 2016.

We have not paid any cash dividends on our common shares in the past. In addition, our credit facility includes restrictions on the amount of dividends we may pay to shareholders. We currently expect to retain future earnings for use in the operation and expansion of our business and do not anticipate paying cash dividends in the foreseeable future.

Issuer Purchases of Equity Securities

The following table provides information about the Company’s repurchase of its equity securities that are registered pursuant to Section 12 of the Exchange Act during the quarter ending December 31, 2015, at a total cost of $16.0 million:

⁽¹⁾   All share repurchases were made on the open market.

⁽²⁾    Average price paid per share is calculated on a settlement basis and excludes commission.

⁽³⁾    On December 4, 2014, and again on December 7, 2015, the Board of Directors approved the repurchase of up to $100 million of the Company’s outstanding common shares. Share purchases may be made in the open market, in privately negotiated transactions or block transactions, at the discretion of the Company’s management and as market conditions warrant. Purchases will be funded from available cash and may be commenced, suspended or discontinued at any time without prior notice. Shares repurchased under the program are retired.

During 2015, the Company repurchased a total of 3.1 million common shares for $68.4 million at an average price of $22.27 per share. Since 2011, the Company has repurchased a total of 14.0 million common shares for $256.7 million at an average price of $18.37 per share.

Performance Graph

The following Performance Graph compares the cumulative total shareholder return on our common shares for the five‑year period commencing December 31, 2010 and ending December 31, 2015, with the cumulative total return of the Standard & Poor’s 500 Stock Index (which does not include Benchmark), and the Peer Group Index, which is composed of Celestica Inc., Flextronics International, Ltd., Jabil Circuit, Inc., Plexus Corp and Sanmina Corporation. Dividend reinvestment has been assumed.

Item 6.  Selected Financial Data.

(1)       See Note 16 to the Consolidated Financial Statements for a discussion of the restructuring charges and integration and acquisition-related charges occurring in 2015, 2014 and 2013. During 2012 and 2011, the Company recognized restructuring totaling $2.2 million and $4.5 million related to reductions in workforce and the resizing and closure of certain facilities.

(2)       During the first quarter of 2014, we received the final $1.6 million of insurance proceeds related to the flooding of our facilities in Ayudhaya, Thailand during the fourth quarter of 2011.  As a result of the flooding and temporary closing of these facilities, the Company incurred property losses and flood related costs during 2012 and 2011, which were partially offset by insurance recoveries.  During 2013, Thailand flood-related items resulted in a gain of $41.3 million.

(3)       During the fourth quarter of 2014, the Company recorded a $1.5 million gain on the sale of its Tianjin, China subsidiary, including its manufacturing facility which had been held for sale since 2008. During the second quarter of 2013, the Company recorded a non-cash impairment charge of $3.8 million related to this facility. Also during the second quarter of 2013, the Company disposed a non-manufacturing facility in Thailand for $1.6 million resulting in a gain of $1.2 million.

(4)       See Note 9 to the Consolidated Financial Statements for a discussion of income taxes. During the fourth quarter of 2015, the Company reduced its deferred tax valuation allowance by $19.5 million and reduced its unrecognized tax benefits reserve by $1.7 million. During the fourth quarter of 2013, the Company reduced its deferred tax valuation in the U.S. by $17.5 million. During the third quarter of 2011, the Company reduced its deferred tax valuation allowance by $17.5 million in the U.S. and, at the same time, increased its valuation allowance by $1.2 million in foreign jurisdictions.

(5)       See Note 1(j) to the Consolidated Financial Statements for the basis of computing earnings per share.

Item 7.  Management’s Discussion and Analysis of Financial Condition and Results of Operations.

The following discussion should be read in conjunction with the Consolidated Financial Statements and Notes thereto in Item 8 of this Report. You should also bear in mind the Risk Factors set forth in Item 1A, any of which could materially and adversely affect the Company’s business, operating results, financial condition and the actual results of the matters addressed by the forward-looking statements contained in the following discussion.

2015 HIGHLIGHTS

On November 12, 2015, we acquired Secure Technology for a purchase price of $230 million subject to a working capital adjustment. The Secure Acquisition deepens Benchmark’s engineering capabilities and enhances its ability to serve customers in the highly regulated industrial, aerospace and defense markets through state-of-the art design, engineering, and manufacturing facilities in Santa Ana and Anaheim, California and Tijuana, Mexico.  The preliminary allocation of the net purchase price resulted in $153.3 million of goodwill.  In connection with the acquisition, we borrowed $230.0 million under a new term loan facility that was used to finance the purchase price.

Sales for 2015 were $2.5 billion, a 9% decrease from sales of $2.8 billion in 2014. During 2015, sales to customers in our various industry sectors fluctuated from 2014 as follows:

·       Industrials decreased by 3%,

·       Telecommunications decreased by 26%,

·       Computing decreased by 4%,

·       Medical increased by 13%, and

·       Test & Instrumentation decreased by 13%.

A significant portion of the overall decrease in sales resulted from a decrease in Telecommunications revenue primarily related to product life cycle transitions at one of our top customers that had strong demand in 2014.  In addition, many of our Telecommunications customers experienced order declines during the last half of 2015 related to broader demand weakness associated with reduced infrastructure spending. These customers are offering a cautious outlook regarding near-term market recovery and have reduced spending as they await positive future catalysts.

Our sales depend on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, can adversely affect us. A substantial percentage of our sales are made to a small number of customers, and the loss of a major customer, if not replaced, would adversely affect us. Sales to our ten largest customers represented 47% and 50% of our sales in 2015 and 2014, respectively. In both 2015 and 2014, sales to International Business Machines Corporation represented 11% of our sales.

We experience fluctuations in gross profit from period to period. Different programs contribute different gross profits depending on factors such as the types of services involved, location of production, size of the program, complexity of the product and level of material costs associated with the various products. Moreover, new programs can contribute relatively less to our gross profit in their early stages when manufacturing volumes are usually lower, resulting in inefficiencies and unabsorbed manufacturing overhead costs. In addition, a number of our new and higher volume programs remain subject to competitive constraints that could exert downward pressure on our margins. During periods of low production volume, we generally have idle capacity and reduced gross profit.

We have undertaken initiatives to restructure our business operations with the intention of improving utilization and reducing costs. During 2015, the Company recognized $5.6 million (pre-tax) of integration and acquisition-related costs, primarily related to acquisition costs of the Secure Acquisition, and $8.3 million (pre-tax) of restructuring charges  in connection with reductions in workforce of certain facilities primarily in the Americas.

RESULTS OF OPERATIONS

The following table presents the percentage relationship that certain items in our Consolidated Statements of Income bear to sales for the periods indicated. The financial information and the discussion below should be read in conjunction with the Consolidated Financial Statements and Notes thereto in Item 8 of this Report.

2015 Compared With 2014

Sales

As noted above, sales decreased 9% in 2015. The percentages of our sales by sector were as follows:

Industrials. 2015 sales decreased 3% to $820.3 million from $845.9 million in 2014  primarily as a result of lower infrastructure spending and the impact of the strengthening U.S. dollar.

Telecommunications. 2015 sales decreased 26% to $595.1 million from $807.2 million in 2014. The decrease was primarily related to product life cycle transitions at one of our top customers that had strong demand in 2014. In addition, many of our Telecommunications customers experienced order declines during the last half of 2015 related to broader demand weakness associated with reduced infrastructure spending.

Computing. 2015 sales decreased 4% to $551.2 million from $577.1 million in 2014. The decrease was primarily due to lower demand from our customers.

Medical. 2015 sales increased 13% to $350.4 million from $310.7 million in 2014 primarily as a result of new programs.

Testing & Instrumentation. 2015 sales decreased 13% to $223.8 million from $256.2 million in 2014 primarily due to the loss of the customer that declared bankruptcy in 2014 offset by increased demand from other customers. The bankrupt customer had accounted for $50.7 million of our sales during 2014.

Our international operations are subject to the risks of doing business abroad. See Item 1A for factors pertaining to our international sales and fluctuations in the exchange rates of foreign currency and for further discussion of

potential adverse effects in operating results associated with the risks of doing business abroad. During 2015 and 2014, 50% and 53%, respectively, of our sales were from international operations.

We had a backlog of approximately $1.7 billion at December 31, 2015, as compared to $1.6 billion at December 31, 2014. Backlog consists of purchase orders received, including, in some instances, forecast requirements released for production under customer contracts. Although we expect to fill substantially all of our backlog at December 31, 2015 during 2016, we do not have long-term agreements with all of our customers, and customer orders can be canceled, changed or delayed by customers. The timely replacement of canceled, changed or delayed orders with orders from new customers cannot be assured, nor can there be any assurance that any of our current customers will continue to utilize our services. Because of these factors, backlog is not a meaningful indicator of future financial results.

Gross Profit

Gross profit decreased to $218.6 million for 2015 from $219.9 million in 2014. Our 2015 gross profit as a percentage of sales increased to 8.6% from 7.9% in 2014  primarily due to benefits from our increased higher-value market revenue base, ongoing operational excellence initiatives, as well as increased utilization associated with our restructuring activities. We experience fluctuations in gross profit from period to period.

Selling, General and Administrative Expenses

Selling, general and administrative expenses (SG&A) decreased to $111.7 million in 2015 from $115.7 million in 2014. The decrease in SG&A was primarily attributable to reduced costs related to our continued integration and restructuring activities, a $2.7 million charge for provisions to accounts receivable associated with the GT Advance Technologies bankruptcy filing in 2014, and lower variable compensation expenses. Including the provisions to accounts receivable associated with the referenced bankruptcy, SG&A expenses, as a percentage of sales was 4.4% and 4.1%, respectively, for 2015 and 2014. This increase related primarily to decreased sales volumes.

Restructuring Charges and Integration and Acquisition-Related Costs

During 2015, we recognized $13.9 million of restructuring charges and integration and acquisition-related costs primarily related to acquisition costs of the Secure Acquisition and restructuring charges in connection with reductions in workforce of certain facilities primarily in the Americas. In 2014, we recognized $7.1 million of restructuring charges and integration and acquisition-related costs primarily related to integration costs of the CTS Acquisition. See Notes 2 and 16 to the Consolidated Financial Statements in Item 8 of this Report.

Thailand Flood-Related Items

Our facilities in Ayudhaya, Thailand flooded and remained closed from October 13, 2011 to December 20, 2011. As a result of the flooding and temporary closing of these facilities, we incurred property losses and flood related costs during 2012 and 2011, which were partially offset by insurance recoveries. During 2014, Thailand flood-related items resulted in a gain of $1.6 million of insurance proceeds. The recovery process with our insurance carriers was completed in the first quarter of 2014. See Note 17 to the Consolidated Financial Statements in Item 8 of this Report.

Asset Impairment Charge and Other

We disposed of our Tianjin, China subsidiary in 2014, which included a non-manufacturing facility, for $5.7 million, resulting in a gain of $1.5 million.

Interest Expense

Interest expense increased to $3.0 million in 2015 from $1.9 million in 2014 due to the additional debt incurred in connection with the Secure Acquisition and the accelerated amortization of debt issuance costs from our prior credit facility that was replaced in November 2015. See Note 6 to the Consolidated Financial Statements in Item 8 of this Report.

Income Tax Expense

Income tax benefit of $5.4 million represented a negative 6.0% effective tax rate for 2015, compared with $17.4 million that represented an effective tax rate of 17.4% for 2014. In 2015, we recorded discrete tax benefits of $21.2 million related to a reduced valuation allowance on U.S. net operating losses and the release of tax reserves associated with a foreign subsidiary for which the statutory period for tax audits expired. We had a tax incentive in China that expired at the end of 2012, but was extended in the first quarter of 2014 until 2015 and retroactively applied to the 2013 calendar year. The tax adjustment for the $1.2 million retroactive incentive for 2013 was recorded as a discrete tax benefit as of March 31, 2014. Excluding these tax items, the effective tax rate would have been 17.6% in 2015 compared to 18.7% in 2014. The decrease in the effective tax rate results primarily from taxable income in geographies with lower tax rates.

We have been granted certain tax incentives, including tax holidays, for our subsidiaries in China, Malaysia and Thailand that will expire at various dates, unless extended or otherwise renegotiated, through 2015 in China, 2016 in Malaysia, and 2028 in Thailand. See Note 9 to the Consolidated Financial Statements in Item 8 of this Report.

Net Income

We reported net income of $95.4 million, or $1.83 per diluted share for 2015, compared with net income of $81.2 million, or $1.50 per diluted share for 2014. The net increase of $14.2 million in 2015 derived from the factors discussed above.

2014 Compared With 2013

Sales

Sales for 2014 were $2.8 billion, a 12% increase from sales of $2.5 billion in 2013. The overall increase in sales related primarily to increased demand from existing customers, including new programs, new customers and the impact of the Suntron and CTS Acquisitions. The percentages of our sales by sector were as follows:

Industrials. 2014 sales increased 19% to $845.9 million from $712.4 million in 2013  primarily as a result of increased demand from existing customers, including new programs, and the impact of the Suntron and CTS Acquisitions.

Telecommunications. 2014 sales increased 39% to $807.2 million from $579.8 million in 2013. The increase was primarily due to new programs, increased demand from existing customers and the impact of the CTS Acquisition.

Computing. 2014 sales decreased 22% to $577.1 million from $737.4 million in 2013. The decrease was primarily due to the timing of program transitions as well as lower demand from our customers.

Medical. 2014 sales increased 10% to $310.7 million from $281.7 million in 2013 primarily as a result of new programs, and, to a lesser extent, the impact of the CTS Acquisition.

Testing & Instrumentation. 2014 sales increased 31% to $256.2 million from $195.2 million in 2013 primarily due to new programs, improvement in the semiconductor industry, and the impact of the Suntron Acquisition.

During 2014 and 2013, 53% and 51%, respectively, of our sales were from international operations.

We had a backlog of approximately $1.6 billion at December 31, 2014, compared to the 2013 year-end backlog of $1.7 billion.

Gross Profit

Gross profit increased 18% to $219.5 million for 2014 from $186.5 million in 2013 due primarily to an increase in sales. Our 2014 gross profit as a percentage of sales increased to 7.9% from 7.4% in 2013 primarily due to higher sales volume, changes in the mix of programs and the impact of the acquisitions.

Selling, General and Administrative Expenses

SG&A increased to $115.7 million in 2014 from $99.3 million in 2013. The increase related primarily to the Suntron and CTS acquisitions, support of increased sales volumes and a $2.7 million charge for provisions to accounts receivable associated with the bankruptcy filing of GT Advance Technologies in October 2014. SG&A as a percentage of sales was 4.1% and 4.0%, respectively, for 2014 and 2013. Excluding the provisions to accounts receivable associated with the referenced bankruptcy, SG&A as a percentage of sales was 4.0% in both 2014 and 2013.

Restructuring Charges and Integration and Acquisition-Related Costs

During 2014, we recognized $7.1 million of restructuring charges and integration and acquisition-related costs primarily related to integration costs of the CTS Acquisition. In 2013, we recognized $9.3 million in restructuring charges and integration and acquisition-related costs primarily related to the closure of our Brazil and Singapore facilities and the acquisitions of Suntron and CTS.

Thailand Flood-Related Items

During 2014, Thailand flood-related items resulted in a gain of $1.6 million of insurance proceeds. The recovery process with our insurance carriers was completed during 2014. During 2013, Thailand flood-related items resulted in a gain of $41.3 million.

Asset Impairment Charge and Other

In 2014, we recognized a gain of $1.5 million from the sale of our Tianjin, China subsidiary. In 2013, we had recognized a non-cash asset impairment charge of $3.8 million related to the Tianjin facility and disposed of a non-manufacturing facility in Thailand for $1.6 million resulting in a gain of $1.2 million.

Income Tax Expense

Income tax expense of $17.4 million represented an effective tax rate of 17.4% for 2014, compared with $5.0 million that represented an effective tax rate of 4.3% for 2013. In 2014, we recorded a discrete tax benefit of $1.2 million related to the retroactive application of the tax incentive in China for 2013 that was granted in 2014. In 2013, we recorded a discrete U.S. tax benefit of $17.5 million related to  reduced valuation allowance on U.S. net operating

losses and other deferred tax assets and a discrete tax benefit of approximately $0.8 million related to the American Taxpayer Relief Act of 2012 (ATRA) consisting of research and experimentation credits and decreases in U.S. taxable income related to previously taxed foreign transactions. ATRA retroactively restored the research and experimentation credit and other U.S. income tax benefits for 2012 and extends these provisions through the end of 2013. Excluding these tax items, the effective tax rate would have been 18.7% in 2014 compared to 19.1% in 2013. The decrease in the effective tax rate results primarily from taxable income in geographies with lower tax rates.

Net Income

We reported net income of $81.2 million, or $1.50 per diluted share for 2014, compared with net income of $110.9 million, or $2.03 per diluted share for 2013. The net decrease of $29.7 million in 2014 was due to the factors discussed above.

LIQUIDITY AND CAPITAL RESOURCES

We have historically financed our organic growth and operations through funds generated from operations. Cash and cash equivalents totaled $466.0 million at December 31, 2015 and $427.4 million at December 31, 2014, of which $424.0 million and $333.3 million, respectively, was held outside the U.S. in various foreign subsidiaries. Substantially all of the amounts held outside of the U.S. are intended to be permanently reinvested in foreign operations. Under current tax laws and regulations, if cash and cash equivalents held outside the U.S. were to be distributed to the U.S. in the form of dividends or otherwise, we would be subject to additional U.S. income taxes and foreign withholding taxes.

Cash provided by operating activities was $146.8 million in 2015. The cash provided by operations during 2015 consisted primarily of $95.4 million of net income adjusted for $49.7 million of depreciation and amortization, and a $52.8 million decrease in accounts receivable, offset by a $41.4 million decrease in accounts payable. The decrease in accounts receivable was primarily driven by the decline in fourth quarter sales from 2014 to 2015. The decrease in accounts payable in 2015 is a result of lower fourth quarter activity in 2015 compared to 2014. Working capital was $1.1 billion at December 31, 2015 and $1.0 billion at December 31, 2014.

We are continuing the practice of purchasing components only after customer orders or forecasts are received, which mitigates, but does not eliminate, the risk of loss on inventories. Supplies of electronic components and other materials used in operations are subject to industry-wide shortages. In certain instances, suppliers may allocate available quantities to us. If shortages of these components and other material supplies used in operations occur, vendors may not ship the quantities we need for production, and we may be forced to delay shipments, which would increase backorders and impact cash flows.

Cash used in investing activities was $266.8 million in 2015 primarily due to the purchase of Secure, net of cash acquired totaling $229.6 million and the purchases of additional property, plant and equipment totaling $37.1 million. These purchases were primarily for machinery and equipment in the Americas and Asia.

Cash provided by financing activities was $159.6 million in 2015. In connection with the Secure Acquisition, we borrowed $230.0 million under a term loan facility (the Term Loan Facility) that was used to finance the purchase price of the acquisition. Share repurchases totaled $68.4 million, and we received $2.0 million from the exercise of stock options.

Under the terms of our new $430.0 million Credit Agreement (the Credit Agreement), in addition to the Term Loan Facility, we have a $200.0 million five-year revolving credit facility (the Revolving Credit Facility) to be used for general corporate purposes with a maturity date of November 12, 2020. The Credit Agreement includes an accordion feature pursuant to which total commitments under the facility may be increased by an additional $150.0 million, subject to satisfaction of certain conditions. As of December 31, 2015, we had $230.0 million in borrowings

outstanding under the Term Loan Facility and $1.6 million in letters of credit outstanding under the Revolving Credit Facility. $198.4 million remains available for future borrowings under the Revolving Credit Facility. See Note 6 to the Consolidated Financial Statements in Item 8 of this Report for more information regarding the terms of the Credit Agreement.

Our operations, and the operations of businesses we acquire, are subject to certain foreign, federal, state and local regulatory requirements relating to environmental, waste management, health and safety matters. We believe we operate in substantial compliance with all applicable requirements and we seek to ensure that newly acquired businesses comply or will comply substantially with applicable requirements. To date, the costs of compliance and workplace and environmental remediation have not been material to us. However, material costs and liabilities may arise from these requirements or from new, modified or more stringent requirements in the future. In addition, our past, current and future operations, and the operations of businesses we have or may acquire, may give rise to claims of exposure by employees or the public, or to other claims or liabilities relating to environmental, waste management or health and safety concerns.

As of December 31, 2015, we had cash and cash equivalents totaling $466.0 million and $198.4 million available for borrowings under the Credit Agreement. During the next 12 months, we believe our capital expenditures will approximate $40 million to $50 million, principally for machinery and equipment to support our ongoing business around the globe.

On both December 7, 2015 and December 4, 2014, our Board of Directors approved the repurchase of up to $100.0 million of our outstanding common shares. As of December 31, 2015, we had $134.7 million remaining under the repurchase programs to purchase additional shares. We are under no commitment or obligation to repurchase any particular amount of common shares. Management believes that our existing cash balances and funds generated from operations will be sufficient to permit us to meet our liquidity requirements over the next 12 months. Management further believes that our ongoing cash flows from operations and any borrowings we may incur under our Revolving Credit Facility will enable us to meet operating cash requirements in future years. Should we desire to consummate significant acquisition opportunities, our capital needs would increase and could possibly result in our need to increase available borrowings under our Credit Agreement or access public or private debt and equity markets. There can be no assurance, however, that we would be successful in raising additional debt or equity on acceptable terms. 

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Management’s discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. Our significant accounting policies are summarized in Note 1 to the Consolidated Financial Statements in Item 8 of this Report. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to accounts receivable, inventories, income taxes, long-lived assets, stock-based compensation and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ materially from these estimates. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

Allowance for Doubtful Accounts

Our accounts receivable balance is recorded net of allowances for amounts not expected to be collected from our customers. Because our accounts receivable are typically unsecured, we periodically evaluate the collectibility of our accounts based on a combination of factors, including a particular customer’s ability to pay as well as the age of the receivables. To evaluate a specific customer’s ability to pay, we analyze financial statements, payment history and various information or disclosures by the customer or other publicly available information. In cases where the evidence suggests a customer may not be able to satisfy its obligation to us, we establish a specific allowance in an amount we determine appropriate for the perceived risk. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.

Inventory Obsolescence

We purchase inventory based on forecasted demand and record inventory at the lower of cost or market. We write down inventory for estimated obsolescence as necessary in an amount equal to the difference between the cost of inventory and estimated market value based on assumptions of future demands and market conditions. We evaluate our inventory valuation on a quarterly basis based on current and forecasted usage and the latest forecasts of product demand and production requirements from our customers. Customers frequently make changes to their forecasts, which requires us to make changes to our inventory purchases, commitments, and production scheduling and may require us to cancel open purchase commitments with our vendors. This process may lead to on-hand inventory quantities and on-order purchase commitments that exceed our customers’ revised needs, or parts that become obsolete before use in production. We write down excess and obsolete inventory when we determine that our customers are not responsible for it, or if we believe our customers will be unable to fulfill their obligation to ultimately purchase it. If actual market conditions are less favorable than those we projected, additional inventory write-downs may be required.

Income Taxes

We estimate our income tax provision in each of the jurisdictions where we operate, including estimating exposures related to uncertain tax positions. We must also make judgments regarding the ability to realize the deferred tax assets. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. Our valuation allowance as of December 31, 2015 of $17.2 million primarily relates to deferred tax assets from our foreign net operating loss tax carryforwards of $12.4 million.

Differences in our future operating results as compared to the estimates utilized in the determination of the valuation allowances could result in adjustments in valuation allowances in future periods. For example, a significant increase in our operations in the United States, future accretive acquisitions in the United States and any movement in the mix of profits from our international operations to the United States would result in a reduction in the valuation allowance and would increase income in the period such determination was made. Alternatively, significant economic downturns in the United States generating additional operating loss carryforwards and potential movements in the mix of profits to international locations would result in an increase in the valuation allowance and would decrease income in the period such determination was made.

During 2015 and 2013, we evaluated the recoverability of our deferred tax assets using the criteria described above and concluded that our projected future taxable income in the U.S. is sufficient to utilize additional net operating loss carryforwards and other deferred tax assets. As a result, we reduced our U.S. valuation allowance by $19.6 million and $17.5 million, respectively, in 2015 and 2013.

We are subject to examination by tax authorities for different periods in various U.S. and foreign tax jurisdictions. During the course of such examinations, disputes may occur as to matters of fact and/or law. In most tax jurisdictions the passage of time without examination will result in the expiration of applicable statutes of limitations, thereby precluding the taxing authority from examining the relevant tax period(s). We believe that we have adequately provided for our tax liabilities.

Impairment of Long-Lived Assets and Goodwill

Long-lived assets, such as property, plant, and equipment, purchased intangibles subject to amortization and indefinite lived intangibles, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to the estimated undiscounted future cash flows expected to be generated by the asset. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge would be recognized by the amount that the carrying amount of the asset exceeds the fair value of the asset.

Goodwill is tested for impairment on an annual basis, at a minimum, and whenever events and circumstances indicate that the carrying amount may be impaired. Circumstances that may lead to the impairment of goodwill include unforeseen decreases in future performance or industry demand or the restructuring of our operations as a result of a change in our business strategy. We perform a qualitative assessment to determine if goodwill is potentially impaired. If the qualitative assessment indicates that it is more likely than not that the fair value of a reporting unit is less than its carrying amount, or if we elect not to perform a qualitative assessment, then we would be required to perform a quantitative impairment test for goodwill. This two-step process involves determining the fair values of the reporting units and comparing those fair values to the carrying values, including goodwill, of the reporting unit. An impairment loss would be recognized to the extent that the carrying amount exceeds the asset’s fair value. For purposes of performing our goodwill impairment assessment, our reporting units are the same as our operating segments as defined in Note 13 to the Consolidated Financial Statements in Item 8 of this Report. As of December 31, 2015 and 2014, we had goodwill of approximately $199.3 million and $46.0 million, respectively, associated with our Americas and Asia business segments.  The preliminary allocation of the Secure Acquisition net purchase price added $153.3 million of goodwill in 2015.

Based on our qualitative assessment of goodwill as of December 31, 2015, 2014 and 2013, we concluded that it was more likely than not that the fair value of our Americas and Asia business segments were greater than their carrying amounts, and therefore no further testing was required.

Changes in economic and operating conditions that occur after the annual impairment analysis or an interim impairment analysis, and that impact these assumptions, may result in a future goodwill impairment charge.

Stock-Based Compensation

We recognize stock-based compensation expense in our consolidated statements of income. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model. Option-pricing models require the input of subjective assumptions, including the expected life of the option and the expected stock price volatility. Judgment is also required in estimating the number of stock-based awards that are expected to vest as a result of satisfaction of time-based vesting schedules. If actual results or future changes in estimates differ significantly from our current estimates, stock-based compensation could increase or decrease. For performance-based restricted stock unit awards, compensation expense is based on the probability that the performance goals will be achieved, which is monitored by management throughout the requisite service period. If it becomes probable, based on our expectation of performance during the measurement period, that more or less than the previous estimate of the awarded shares will vest, an adjustment to stock-based compensation expense is recognized as a change in accounting estimate. See Note 1(m) to the Consolidated Financial Statements in Item 8 of this Report.

Recently Enacted Accounting Principles

See Note 1(q) to the Consolidated Financial Statements in Item 8 of this Report for a discussion of recently enacted accounting principles.

CONTRACTUAL OBLIGATIONS

We have certain contractual obligations that extend out beyond 2016 under lease obligations and debt arrangements. Non-cancelable purchase commitments do not typically extend beyond the normal lead-time of several weeks. Purchase orders beyond this time frame are typically cancelable. We do not utilize off-balance sheet financing techniques other than traditional operating leases and we have not guaranteed the obligations of any entity that is not one of our wholly owned subsidiaries. The total contractual cash obligations in existence at December 31, 2015 due pursuant to contractual commitments are:

The amount of unrecognized tax benefits as of December 31, 2015 including interest and penalties was $16.4 million. We have not provided a detailed estimate of the timing of future cash outflows associated with the liabilities recognized in this balance due to the uncertainty of when the related tax settlements may become due. See Note 9 to the Consolidated Financial Statements in Item 8 of this Report.

OFF-BALANCE SHEET ARRANGEMENTS

As of December 31, 2015, we did not have any significant off-balance sheet arrangements. See Note 11 to the Consolidated Financial Statements in Item 8 of this Report.

Item 7A.  Quantitative and Qualitative Disclosures About Market Risk.

Our international sales comprise a significant portion of our net sales. We are exposed to risks associated with operating internationally, including:

•      Foreign currency exchange risk;

•      Import and export duties, taxes and regulatory changes;

•      Inflationary economies or currencies; and

•      Economic and political instability.

Additionally, some of our operations are in developing countries. Certain events, including natural disasters, can impact the infrastructure of a developing country more severely than they would impact the infrastructure of a developed country. A developing country can also take longer to recover from such events, which could lead to delays in our ability to resume full operations.

We transact business in various foreign countries and are subject to foreign currency fluctuation risks. We use natural hedging and forward contracts to economically hedge transactional exposure primarily associated with trade accounts receivable, other receivables and trade accounts payable denominated in a currency other than the functional currency of the respective operating entity. We do not use derivative financial instruments for speculative purposes. The forward contracts in place as of December 31, 2015 have not been designated as accounting hedges and, therefore, changes in fair value are recorded within our Consolidated Statements of Income.

Our sales are substantially denominated in U.S. dollars. Our foreign currency cash flows are generated in certain European and Asian countries and Mexico.

We are also exposed to market risk for changes in interest rates on our financial instruments, a portion of which relates to our invested cash balances. We do not use derivative financial instruments in our investing activities. We place cash and cash equivalents and investments with various major financial institutions. We protect our invested principal funds by limiting default risk, market risk and reinvestment risk. We mitigate default risk by generally investing in investment grade securities.

We are also exposed to interest rate risk on borrowings under our Credit Agreement. As of December 31, 2015, we had $230 million outstanding on the floating rate term loan facility. Effective December 31, 2015, we entered into an interest rate swap agreement with a notional amount of $172.5 million. Under this interest rate swap agreement, we receive variable rate interest rate payments and pay fixed rate interest payments. The effect of this swap is to convert a portion of our floating rate interest expense to fixed interest rate expense. The interest rate swap is designated as a cash flow hedge.

Item 8.  Financial Statements and Supplementary Data.