BADGER METER INC - FORM 10-K - February 26, 2016

Attached files

file	filename
EX-31.1 - EXHIBIT 31.1 - BADGER METER INC	bmi-ex311_20151231x10k.htm
EX-31.2 - EXHIBIT 31.2 - BADGER METER INC	bmi-ex312_20151231x10k.htm
EX-21 - EXHIBIT 21 - BADGER METER INC	bmiex21_2015123110k.htm
EX-32 - EXHIBIT 32 - BADGER METER INC	bmi-ex32_20151231x10k.htm
EX-23 - EXHIBIT 23 - BADGER METER INC	bmiex23_2015123110k.htm

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

FORM 10-K

Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934

for the fiscal year ended December 31, 2015

BADGER METER, INC.

4545 W. Brown Deer Road

Milwaukee, Wisconsin 53223

(414) 355-0400

A Wisconsin Corporation

IRS Employer Identification No. 39-0143280

Commission File No. 001-06706

The Company has the following classes of securities registered pursuant to Section 12(b) of the Act:



Title of class:		Name of each exchange on which registered:
Common Stock		New York Stock Exchange
Common Share Purchase Rights		New York Stock Exchange

The Company does not have any securities registered pursuant to Section 12(g) of the Act.

Indicate by check mark if the Company is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act. Yes ý No ¨

Indicate by check mark if the Company is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act. Yes ¨ No ý

Indicate by check mark whether the Company (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Company was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes ý No ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes ý No ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. ý

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer,” “non-accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act: (Check one).



Large accelerated filer	ý	Accelerated filer	¨
Non-accelerated filer	¨	Smaller reporting company	¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes ¨ No ý

The aggregate market value of the Common Stock held by non-affiliates of the Company as of June 30, 2015 was $780,451,732. For purposes of this calculation only, (i) shares of Common Stock are deemed to have a market value of $63.49 per share, the closing price of the Common Stock as reported on the New York Stock Exchange on June 30, 2015, and (ii) each of the Company's executive officers and directors is deemed to be an affiliate of the Company.

As of February 9, 2016, there were 14,522,255 shares of Common Stock outstanding with a par value of $1 per share.

Portions of the Company's Proxy Statement for the 2016 Annual Meeting of Shareholders, which will be filed with the Securities and Exchange Commission under Regulation 14A within 120 days after the end of the registrant's fiscal year, are incorporated by reference from the definitive Proxy Statement into Part III of this Annual Report on Form 10-K.

Special Note Regarding Forward Looking Statements

Certain statements contained in this Annual Report on Form 10-K, as well as other information provided from time to time by Badger Meter, Inc. (the “Company”) or its employees, may contain forward looking statements that involve risks and uncertainties that could cause actual results to differ materially from those in the forward looking statements. The words “anticipate,” “believe,” “estimate,” “expect,” “think,” “should,” “could” and “objective” or similar expressions are intended to identify forward looking statements. All such forward looking statements are based on the Company’s then current views and assumptions and involve risks and uncertainties. Some risks and uncertainties that could cause actual results to differ materially from those expressed or implied in forward looking statements include those described in Item 1A of the Company’s Annual Report on Form 10-K for the year ended December 31, 2015 that include, among other things:


•	the continued shift in the Company’s business from lower cost, manually read meters toward more expensive, value-added automatic meter reading (AMR) systems, advanced metering infrastructure (AMI) systems and advanced metering analytics (AMA) systems that offer more comprehensive solutions to customers’ metering needs;


•	the success or failure of newer Company products;


•	changes in competitive pricing and bids in both the domestic and foreign marketplaces, and particularly in continued intense price competition on government bid contracts for lower cost, manually read meters;


•	the actions (or lack thereof) of the Company’s competitors;


•	changes in the Company’s relationships with its alliance partners, primarily its alliance partners that provide radio solutions, and particularly those that sell products that do or may compete with the Company’s products;

•

changes in the general health of the United States and foreign economies, including to some extent such things as the length and severity of global economic downturns, international or civil conflicts that affect international trade, the ability of municipal water utility customers to authorize and finance purchases of the Company’s products, the Company’s ability to obtain financing, housing starts in the United States, and overall industrial activity;


•	unusual weather, weather patterns or other natural phenomena, including related economic and other ancillary effects of any such events;


•	the timing and impact of government funding programs that stimulate national and global economies, as well as the impact of government budget cuts or partial shutdowns of governmental operations;

•

changes in the cost and/or availability of needed raw materials and parts, such as volatility in the cost of brass castings as a result of fluctuations in commodity prices, particularly for copper and scrap metal at the supplier level, foreign-sourced electronic components as a result of currency exchange fluctuations and/or lead times, and plastic resin as a result of changes in petroleum and natural gas prices;

•

the Company’s expanded role as a prime contractor for providing complete technology systems to governmental entities, which brings with it added risks, including but not limited to, the Company’s responsibility for subcontractor performance, additional costs and expenses if the Company and its subcontractors fail to meet the timetable agreed to with the governmental entity, and the Company’s expanded warranty and performance obligations;


•	the Company’s ability to successfully integrate acquired businesses or products;


•	changes in foreign economic conditions, particularly currency fluctuations in the United States dollar, the Euro and the Mexican peso;


•	the inability to develop technologically advanced products;


•	the failure of the Company’s products to operate as intended;


•	the inability to protect the Company’s proprietary rights to its products;


•	disruptions and other damages to information technology and other networks and operations due to breaches in data security;


•	transportation delays or interruptions;


•	the loss of certain single-source suppliers; and


•	changes in laws and regulations, particularly laws dealing with the content or handling of materials used in the Company's products.

All of these factors are beyond the Company's control to varying degrees. Shareholders, potential investors and other readers are urged to consider these factors carefully in evaluating the forward looking statements contained in this Annual Report on Form 10-K and are cautioned not to place undue reliance on such forward looking statements. The forward looking statements made in this document are made only as of the date of this document and the Company assumes no obligation, and disclaims any obligation, to update any such forward looking statements to reflect subsequent events or circumstances.

PART I

ITEM 1. BUSINESS

Badger Meter, Inc. (the “Company”) is a leading innovator, manufacturer and marketer of products incorporating flow measurement, control and communication solutions serving markets worldwide. The Company was incorporated in 1905.

Throughout this 2015 Annual Report on Form 10-K, the words “we,” “us” and “our” refer to the Company.

Available Information

The Company's Internet address is http://www.badgermeter.com. The Company makes available free of charge (other than an investor's own Internet access charges) through its Internet website its Annual Report on Form 10-K, Quarterly Reports on Form 10-Q, Current Reports on Form 8-K, and amendments to those reports, on the same day they are electronically filed with, or furnished to, the Securities and Exchange Commission. The Company is not including the information contained on or available through its website as a part of, or incorporating such information by reference into, this Annual Report on Form 10-K.

Market Overview, Products, Systems and Solutions

Badger Meter is an innovator in flow measurement, control and communication solutions, serving water utilities, municipalities, and commercial and industrial customers worldwide. The Company’s products measure water, oil, chemicals and other fluids, and are known for accuracy, long-lasting durability and for providing and communicating valuable and timely measurement data. The Company’s product lines fall into two categories: sales of water meters and related technologies to municipal water utilities (municipal water) and sales of meters to various industries for water and other fluids (flow instrumentation). The Company estimates that over 75% of its products are used in water applications when both categories are grouped together.

Municipal water, the largest category by sales volume, includes mechanical and ultrasonic (electronic) water meters and related technologies and services used by municipal water utilities as the basis for generating water and wastewater revenues. The key market for the Company’s municipal water meter products is North America, primarily the United States, because most meters are designed and manufactured to conform to standards promulgated by the American Water Works Association. The majority of water meters sold continues to be mechanical in nature. In recent years, the Company has made inroads in selling ultrasonic water meters. The development of smaller diameter ultrasonic water meters combined with advanced radio technology now provides the Company with the opportunity to sell into other geographical markets, for example Europe, the Middle East and South America. In the municipal water category, sales of water meters and related technologies and services are also commonly referred to as residential or commercial water meter sales, the latter referring to larger sizes of water meters.

Flow instrumentation includes meters and valves sold worldwide to measure and control materials flowing through a pipe or pipeline including water, air, steam, oil, and other liquids and gases. These products are used in a variety of applications, primarily into the following industries: water/wastewater; heating, ventilating and air conditioning (HVAC); oil and gas; chemical and petrochemical; test and measurement; automotive aftermarket; and the concrete construction process. Furthermore, the Company’s flow instrumentation technologies are sold to original equipment manufacturers as the primary flow measurement device within a product or system.

reading. Meters equipped with radio technology (endpoints) receive flow measurement data from encoder registers attached to the water meter which is encrypted and transmitted via radio frequency to a receiver that collects and formats the data appropriately for water utility billing systems. These remotely read, or mobile, systems are either automatic meter reading (AMR) systems, where a vehicle equipped for meter reading purposes, including a radio receiver, computer and reading software, collects the data from utilities’ meters; or fixed network advanced metering infrastructure (AMI) systems, where data is gathered utilizing a network of permanent data collectors or gateway receivers that are always active or listening for the radio transmission from the utilities’ meters. AMI systems eliminate the need for utility personnel to drive through service territories to collect meter reading data. These systems provide the utilities with more frequent and diverse data at specified intervals from their meters.

The ORION® family of radio endpoints provides water utilities with a range of industry-leading options for meter reading. These include ORION Mobile (for mobile meter reading), ORION Fixed Network (for traditional fixed network applications), and ORION Cellular (for infrastructure-free meter reading). ORION Mobile makes the migration to fixed network easier for utilities that prefer to start with mobile reading and later adopt fixed network communications, allowing utilities to choose a solution for their current needs and be positioned for their future operational changes.

Critical to the water metering ecosystem is information and analytics. The Company’s BEACON® AMA Managed Solution is the latest in metering technology. BEACON AMA combines the BEACON analytical software suite with proven ORION technologies using two-way fixed and cellular networks in a managed solution, improving utilities’ visibility of their water consumption and eliminating the need for costly utility managed infrastructure.

The BEACON AMA secure, cloud-hosted software suite includes a customizable dashboard, the ability to establish alerts for specific conditions, and consumer engagement tools that allow end water customers to view and manage their water usage activity. Benefits to the utility include improved customer service, increased visibility through faster leak detection, the ability to promote and quantify the effects of its water conservation efforts, and easier compliance reporting.

The Company’s net sales and corresponding net earnings depend on unit volume and product mix, with the Company generally earning higher margins on meters equipped with radio technology. The Company’s proprietary radio products generally result in higher margins than the remarketed, non-proprietary technology products. The Company also sells registers and endpoints separately to customers who wish to upgrade their existing meters in the field.

The proprietary ORION endpoint technology has been licensed to other technology providers on a non-exclusive basis, including those providing radio products that communicate over power lines, broadband networks and proprietary radio frequency networks, allowing ORION a distinct advantage in the radio solutions market. In addition, the ORION universal gateway receiver transmits data over a variety of public wireless networks, which allows for strategic deployments, such as monitoring large commercial users.

Water meter replacement and the adoption and deployment of new technology comprise the majority of water meter product sales, including radio products. To a much lesser extent, housing starts also contribute to the new product sales base. Over the last decade, there has been a growing trend in the conversion from manually read water meters to radio technology. This conversion rate is accelerating and contributes to an increased water meter and radio solutions base of business. The Company estimates that less than 53% of water meters installed in the United States have been converted to a radio solutions technology. The Company’s strategy is to fulfill customers’ metering expectations and requirements with its proprietary meter reading systems or other systems available through its alliance partners in the marketplace.

Flow instrumentation products serve flow measurement and control applications across a broad industrial spectrum, occasionally leveraging the same technologies used in the municipal water category. Specialized communication protocols that control the entire flow measurement process and mandatory certifications drive these markets. The Company’s specific flow measurement and control applications and technologies serve the flow measurement market through both customized and standard flow instrumentation solutions.

Industries today face accelerating demands to contain costs, reduce product variability, and meet ever-changing safety, regulatory and sustainability requirements. To address these challenges, customers must reap more value from every component in their systems. This system-wide scrutiny has heightened the focus on flow instrumentation in industrial process, manufacturing, commercial fluid, building automation, and precision engineering applications where flow measurement and control are critical.

major flow meter technologies. Customers rely on the Company for application-specific solutions that deliver accurate, timely and dependable flow data and control essential for product quality, cost control, safer operations, regulatory compliance, and more sustainable operations.

The Company's products are sold throughout the world through employees, resellers and representatives. Depending on the customer mix, there can be a moderate seasonal impact on sales, primarily relating to higher sales of certain municipal water products during the spring and summer months. No single customer accounts for more than 10% of the Company's sales.

Competition

There are competitors in each category in which the Company sells its products, and the competition varies from moderate to intense. Major competitors for utility water meters include Sensus, Neptune Technology Group Inc., Master Meter, Inc. and Mueller Water Products, Inc. Together with Badger Meter, it is estimated these companies sell in excess of 90% of the water meters in the North American market, which has been somewhat insulated from other competitors due to the nature of the mechanical technology used and the standards promulgated by the American Water Works Association. In recent years, the Company, as well as some of its competitors, have introduced various forms of electronic meters, which have no moving parts, and have seen sales of those products begin to grow. As the global water metering market, including the North American market, begins to adopt these technologies, Kamstrup A/S, Diehl Metering GmbH and Itron, Inc. are also potential competitors.

The Company's primary competitors for water utility radio products in North America are Itron, Inc., Neptune Technology Group Inc. and Sensus. Outside of North America, the primary competitors include Itron, Inc., Sensus, Diehl Metering GmbH and Elster Group GmbH. While the Company sells its own proprietary radio systems (ORION and GALAXY®), it is also a reseller of the Itron® products. A number of the Company's competitors in certain markets have greater financial resources than the Company. However, the Company believes it currently provides the leading technologies in water meters and radio water systems. As a result of significant research and development activities, the Company enjoys favorable patent positions and trade secret protections for several of its technologies, products and processes.

There are many competitors in the flow instrumentation markets due to the various markets and applications being served. For example, major competitors in the flow instrumentation markets include Emerson Electric Co., Krohne Messtechnik GmbH, Endress+Hauser AG and Yokogawa Electric Corporation. In the HVAC market, the key competitor is Onicon Incorporated. In upstream oil and gas, Cameron International Corp. is the primary competitor. The Company competes with AW-Lake Company in the measurement of on-machine hydraulic fluids. With a portfolio consisting of products utilizing eight of the ten major flow meter technologies, the Company is well positioned to compete in these markets.

Backlog

The Company's total backlog of unshipped orders at December 31, 2015 and 2014 was $35.7 million and $33.6 million, respectively. The backlog is comprised of firm orders and signed contractual commitments, or portions of such commitments that call for shipment within 12 months. Backlog can be significantly affected by the timing of orders for large projects and the amounts can vary due to the timing of work performed.

Raw Materials and Components

Raw materials used in the manufacture of the Company's products include purchased castings made of metal or alloys (such as brass, which uses copper as its main component, aluminum, stainless steel and cast iron), plastic resins, glass, microprocessors and other electronic subassemblies, and components. There are multiple sources for these raw materials and components, but the Company relies on single suppliers for certain brass castings and certain electronic subassemblies. The Company believes these items would be available from other sources, but that the loss of certain suppliers would result in a higher cost of materials, delivery delays, short-term increases in inventory and higher quality control costs in the short term. The Company carries business interruption insurance on key suppliers. The Company's purchases of raw materials are based on production schedules, and as a result, inventory on hand is generally not exposed to price fluctuations. World commodity markets and currency exchange rates may also affect the prices of material purchased in the future. The Company does not hold significant amounts of precious metals.

Research and Development

Expenditures for research and development activities relating to the development of new products, the improvement of existing products and manufacturing process improvements were $10.6 million in 2015 compared to $9.5 million in 2014 and $10.5 million in 2013. Research and development activities are primarily sponsored by the Company. The Company also engages in some joint research and development with other companies.

Intangible Assets

The Company owns or controls several trade secrets and many patents, trademarks and trade names in the United States and other countries that relate to its products and technologies. No single patent, trademark, trade name or trade secret is material to the Company's business as a whole.

Environmental Protection

The Company is subject to contingencies related to environmental laws and regulations. The Company is named as one of many potentially responsible parties in two landfill lawsuits. The landfill sites are impacted by the Federal Comprehensive Environmental Response, Compensation and Liability Act and other environmental laws and regulations. At this time, the Company does not believe the ultimate resolution of these matters will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based on the Company’s assessment of its limited past involvement with these landfill sites as well as the substantial involvement of and government focus on other named third parties with these landfill sites. However, due to the inherent uncertainties of such proceedings, the Company cannot predict the ultimate outcome of any of these matters. A future change in circumstances with respect to these specific matters or with respect to sites formerly or currently owned or operated by the Company, off-site disposal locations used by the Company, and property owned by third parties that is near such sites, could result in future costs to the Company and such amounts could be material. Expenditures for compliance control provisions and regulations during 2015, 2014 and 2013 were not material.

Employees

The Company and its subsidiaries employed 1,514 persons at December 31, 2015, 119 of whom are covered by a collective bargaining agreement with District 10 of the International Association of Machinists. The Company is currently operating under a five-year contract with the union, which expires on October 31, 2016. The Company believes it has good relations with the union and all of its employees.

The following table sets forth certain information regarding the Executive Officers of the Registrant.



Name	Position	Age at 2/28/2016
Richard A. Meeusen	Chairman, President and Chief Executive Officer	61
Richard E. Johnson	Senior Vice President — Finance, Chief Financial Officer and Treasurer	61
Fred J. Begale	Vice President — Engineering	51
William R. A. Bergum	Vice President — General Counsel and Secretary	51
Gregory M. Gomez	Vice President — Flow Instrumentation	51
Horst E. Gras	Vice President — International Operations	60
Raymond G. Serdynski	Vice President — Manufacturing	59
Beverly L. P. Smiley	Vice President — Controller	66
Kimberly K. Stoll	Vice President — Sales and Marketing	49

There are no family relationships between any of the executive officers. Officers are elected annually at the first meeting of the Board of Directors held after each annual meeting of the shareholders. Each officer holds office until his or her successor has been elected or until his or her death, resignation or removal. There is no arrangement or understanding between any executive officer and any other person pursuant to which he or she was elected as an officer.

Mr. Meeusen has served as Chairman, President and Chief Executive Officer for more than five years.

Mr. Johnson has served as Senior Vice President - Finance, Chief Financial Officer and Treasurer for more than five

years.

Mr. Begale has served as Vice President - Engineering for more than five years.

Mr. Bergum has served as Vice President - General Counsel and Secretary for more than five years.

Mr. Gomez became Vice President - Flow Instrumentation in September 2014. Mr. Gomez served as Vice President - Business Development from December 2010 to September 2014.

Mr. Gras has served as Vice President - International Operations for more than five years.

Mr. Serdynski has served as Vice President - Manufacturing for more than five years.

Ms. Smiley has served as Vice President - Controller for more than five years.

Ms. Stoll was elected Vice President - Sales and Marketing in February 2012. Ms. Stoll served as Vice President - Marketing from April 2009 to February 2012.

Foreign Operations and Export Sales

The Company distributes its products through employees, resellers and representatives throughout the world. Additionally, the Company has a sales, distribution and manufacturing facility in Neuffen, Germany; sales and customer service offices in Mexico, Singapore, China, United Arab Emirates and Slovakia; manufacturing facilities in Nogales, Mexico; and manufacturing and sales facilities in Brno, Czech Republic and Bern, Switzerland. The Company exports products from the United States that are manufactured in Milwaukee, Wisconsin; Racine, Wisconsin; Tulsa, Oklahoma; and Scottsdale, Arizona.

Information about the Company's foreign operations and export sales is included in Note 10 “Industry Segment and Geographic Areas” in the Notes to Consolidated Financial Statements in Part II, Item 8 of this 2015 Annual Report on Form 10-K.

Financial Information about Industry Segments

The Company operates in one industry segment as an innovator, manufacturer and marketer of products incorporating flow measurement, control and communication solutions as described in Note 10 “Industry Segment and Geographic Areas” in the Notes to Consolidated Financial Statements in Part II, Item 8 of this 2015 Annual Report on Form 10-K.

ITEM 1A. RISK FACTORS

Shareholders, potential investors and other readers are urged to consider the significant business risks described below in addition to the other information set forth or incorporated by reference in this 2015 Annual Report on Form 10-K, including the “Special Note Regarding Forward Looking Statements” at the front of this 2015 Annual Report on Form 10-K. If any of the events contemplated by the following risks actually occur, our financial condition or results of operations could be materially adversely affected. The following list of risk factors may not be exhaustive. We operate in a continually changing business, economic and geopolitical environment, and new risk factors may emerge from time to time. We can neither predict these new risk factors with certainty nor assess the precise impact, if any, on our business, or the extent to which any factor, or combination of factors, may adversely impact our results of operations. While there is much uncertainty, we do analyze the risks we face, perform a probability assessment of their impacts and attempt to soften their potential impact when and if possible.

Competitive pressures in the marketplace could decrease our revenues and profits.

Competitive pressures in the marketplace for our products could adversely affect our competitive position, leading to a possible loss of market share or a decrease in prices, either of which could result in decreased revenues and profits. We operate in an environment where competition varies from moderate to intense and a number of our competitors have greater financial resources. Our competitors also include alliance partners that sell products that do or may compete with our products, particularly those that provide radio solutions. The principal elements of competition for our most significant product applications, residential and commercial water meters for the municipal water utility market (with various radio technology systems), are price, product technology, quality and service. The competitive environment is also affected by the movement toward radio technologies and away from manually read meters, the demand for replacement units and, to some extent, such things as global economic conditions, the timing and size of governmental programs such as stimulus fund programs, the

ability of municipal water utility customers to authorize and finance purchases of our products, our ability to obtain financing, housing starts in the United States, and overall economic activity. For our flow instrumentation products, the competitive environment is affected by the general economic health of various industrial sectors particularly in the United States and Europe.

The inability to develop technologically advanced products could harm our future success.

We believe that our future success depends, in part, on our ability to develop technologically advanced products that meet or exceed appropriate industry standards. Although we believe that we currently have a competitive advantage in this area, maintaining such advantage will require continued investment in research and development, sales, marketing and manufacturing capabilities. There can be no assurance that we will have sufficient resources to make such investments or that we will be able to make the technological advances necessary to maintain such competitive advantage. If we are unable to maintain our competitive advantage, our future financial performance may be adversely affected. We are not currently aware of any emerging standards or new products that could render our existing products obsolete in the near term. The water utility industry is beginning to see the adoption of ultrasonic (electronic) water meters. Electronic water metering has lower barriers to entry that could affect the competitive landscape in North America. We believe we have a competitive product if the adoption rate for electronic meters were to accelerate.

The inability to obtain adequate supplies of raw materials and component parts at favorable prices could decrease our profit margins and negatively impact timely delivery to customers.

We are affected by the availability and prices for raw materials and component parts, including purchased castings made of metal or alloys (such as brass, which uses copper as its main component, aluminum, stainless steel and cast iron), plastic resins, glass, microprocessors and other electronic subassemblies, and components that are used in the manufacturing process. The inability to obtain adequate supplies of raw materials and component parts for our products at favorable prices could have a material adverse effect on our business, financial condition or results of operations by decreasing profit margins and by negatively impacting timely deliveries to customers. In the past, we have been able to offset increases in raw materials and component parts by increased sales prices, active materials management, product engineering programs and the diversity of materials used in the production processes. However, we cannot be certain that we will be able to accomplish this in the future. Since we do not control the actual production of these raw materials and component parts, there may be delays caused by an interruption in the production or transportation of these materials for reasons that are beyond our control. World commodity markets and inflation may also affect raw material and component part prices.

Regulations related to conflict minerals may force us to incur additional expenses.

The Securities and Exchange Commission has adopted disclosure requirements related to certain minerals sourced from the Democratic Republic of Congo and surrounding countries, or “conflict minerals,” that are necessary to the functionality of a product manufactured, or contracted to be manufactured, by a Securities and Exchange Commission reporting company. The minerals that the rules cover are commonly referred to as “3TG” and include tin, tantalum, tungsten and gold. Implementation of the disclosure requirements could affect the sourcing and availability of some of the materials that we use in the manufacture of our products. There is also uncertainty relating to the requirements of the regulations as a result of ongoing litigation challenging the constitutionality of portions of the regulations. Our supply chain is complex, and if we are not able to determine the origins for all conflict minerals used in our products or that our products are “conflict free,” then we may face reputational challenges with customers or investors. We could also incur significant costs related to the compliance process, including potential difficulty or added costs in satisfying disclosure and audit requirements.

Economic conditions could cause a material adverse impact on our sales and operating results.

As a supplier of products, the majority of which are to water utilities, we may be adversely affected by global economic conditions, delays in governmental programs created to stimulate the economy, and the impact of government budget cuts or partial shutdowns of governmental operations that affect our customers, including independent distributors, large city utilities, private water companies and numerous smaller municipal water utilities. These customers may delay capital projects, including non-critical maintenance and upgrades, or may not have the ability to authorize and finance purchases during economic downturns or instability in world markets. We also sell products for other applications to reduce our dependency on the municipal water market. A significant downturn in this market could cause a material adverse impact on sales and operating results. Therefore, a downturn in general economic conditions, as well as in the municipal water market, and delays in the timing or amounts of possible economic stimulus fund programs, government budget cuts or partial shutdowns of governmental operations, or the availability of funds to municipalities could result in a reduction in demand for our products and services and could harm the business.

Unusual weather and other natural phenomena could adversely affect our business.

Our sales may be adversely affected by unusual weather and natural phenomena that could have an impact on the timing of orders in given periods, depending on the particular mix of customers being served by us at the time.

Failure to manufacture quality products could have a material adverse effect on our business.

If we fail to maintain and enforce quality control and testing procedures, our products will not meet required performance standards. Product quality and performance are a priority for us since our products are used in various applications where precise control of fluids is essential. Although we believe we have a very good reputation for product quality, any future production and/or sale of substandard products would seriously harm our reputation, resulting in both a loss of current customers to competitors and damage to our ability to attract new customers. In addition, if any of our products prove to be defective, we may be required to participate in a recall involving such products. A successful claim brought against us with respect to a defective product in excess of available insurance coverage, if any, or a requirement to participate in a major product recall, could have a material adverse effect on our business, results of operations or financial condition.

Litigation against us could be costly, time consuming to defend and could adversely affect our profitability.

From time to time, we are subject to legal proceedings and claims that arise in the ordinary course of business. For example, we may be subject to workers' compensation claims, employment/labor disputes, customer and supplier disputes, product liability claims, intellectual property disputes and contractual disputes related to warranties arising out of the conduct of our business. Litigation may result in substantial costs and may divert management's attention and resources, which could adversely affect our profitability or financial condition.

If our technology products do not operate as intended, our business could be materially and adversely affected.

We sell and install software products that may contain unexpected design defects or may encounter unexpected complications during installation or when used with other technologies utilized by the customer. A failure of our technology products to operate as intended and in a seamless fashion with other products could materially and adversely affect our results of operations, financial position and cash flows.

Disruptions and other damages to our information technology and other networks and operations, and breaches in data security could have a negative financial impact and damage our reputation.

Our ability to serve customers, as well as increase revenues and control costs, depends in part on the reliability of our sophisticated technologies and system networks. We use information technology and other systems to manage our business in order to maximize our revenue, effectiveness and efficiency. Unauthorized parties gaining access to digital systems and networks for purposes of misappropriating assets or sensitive financial, personal or business information, corrupting data, causing operational disruptions and other cyber-related risks could adversely impact our customer relationships, business plans and our reputation. In some cases, we are dependent on third-party technologies and service providers for which there is no certainty of uninterrupted availability or through which hackers could gain access to sensitive and/or personal information. These potential disruptions and cyber-attacks could negatively affect revenues, costs, customer demand, system availability and our reputation.

If we are not able to protect our proprietary rights to our software and related products, our ability to market our software products could be hindered and our results of operations, financial position and cash flows could be materially and adversely affected.

We rely on our agreements with customers, confidentiality agreements with employees, and our trademarks, trade secrets, copyrights and patents to protect our proprietary rights. These legal protections and precautions may not prevent misappropriation of our proprietary information. In addition, substantial litigation regarding intellectual property rights exists in the software industry, and software products may increasingly be subject to third-party infringement claims. Such litigation and misappropriation of our proprietary information could hinder our ability to market and sell products and services and our results of operations, financial position and cash flows could be materially and adversely affected.

Changes in environmental or regulatory requirements could entail additional expenses that could decrease our profitability.

We cannot predict the nature, scope or effect of future environmental or regulatory requirements to which our operations might be subject or the manner in which existing or future laws will be administered or interpreted. Compliance with such laws or regulations may entail additional expenses that could decrease profitability. We are subject to a variety of environmental laws, such as lead content in certain meters incorporating brass housings or the handling of certain electronic materials, and regulatory laws affecting the use and/or licensing of radio frequencies necessary for radio products, as well as regulations related to customs and trade practices. Currently, the cost of complying with existing laws is included as part of our on-going expenses and does not have a material effect on our business or financial position, but a change in the future could adversely affect our profitability.

Risks related to foreign markets could decrease our profitability.

Since we sell products worldwide as well as manufacture products in several countries, we are subject to risks associated with doing business internationally. These risks include such things as changes in foreign currency exchange rates, changes in political or economic conditions of specific countries or regions, potentially negative consequences from changes in tax laws or regulatory requirements, differing labor regulations, and the difficulty of managing widespread operations.

An inability to attract and retain skilled employees could negatively impact our growth and decrease our profitability.

Our success depends on our continued ability to identify, attract, develop and retain skilled personnel throughout our organization. Current and future compensation arrangements, including benefits, may not be sufficient to attract new employees or retain existing employees, which may hinder our growth.

Rising healthcare and retirement benefit costs could increase cost pressures and decrease our profitability.

We estimate liabilities and expenses for retirement plans and other postretirement benefits that require the use of assumptions relating to the rates used to discount the future estimated liability, rate of return on any assets and various assumptions related to the age and cost of the workforce. Actual results may differ from the estimates and have a material adverse effect on future results of operations or on the financial statements as a whole. Rising healthcare and retirement benefit costs in the United States may also add to cost pressures and decrease our profitability.

A failure to maintain good corporate governance practices could damage our reputation and adversely affect our future success.

We have a history of good corporate governance, including procedures and processes that are required by the Sarbanes-Oxley Act of 2002, the Dodd-Frank Act of 2010, and related rules and regulations, such as board committee charters, and a code of business conduct that defines how employees interact with our various stakeholders and addresses issues such as confidentiality, conflict of interest and fair dealing, and applicable exchange listing standards. Failure to maintain these corporate governance practices could harm our reputation and have a material adverse effect on our business and results of operations.

Failure to successfully identify, complete and integrate acquired businesses or products could adversely affect our operations.

As part of our business strategy, we continue to evaluate and may pursue selected business or product acquisition opportunities that we believe may provide us with certain operating and financial benefits. There can be no assurance that we will identify or complete transactions with suitable acquisition candidates in the future. If we complete any such acquisitions, they may require integration into our existing business with respect to administrative, financial, sales, marketing, manufacturing and other functions to realize these anticipated benefits. If we are unable to successfully integrate a business or product acquisition, we may not realize the benefits identified in our due diligence process, and our financial results may be negatively impacted. Additionally, significant unexpected liabilities may arise during or after completion of an acquisition.

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

ITEM 2. PROPERTIES

The principal facilities utilized by the Company at December 31, 2015 are listed below. The Company owns all such facilities in fee simple except as noted. The Company believes that its facilities are generally well maintained and have sufficient capacity for its current needs.



		Approximate area
Location	Principal use	(square feet)
Scottsdale, Arizona, USA	Manufacturing and offices	32,000	(1	)
Los Gatos, California, USA	Offices	2,000	(2	)
Centennial, Colorado, USA	Distribution and offices	12,000
Tulsa, Oklahoma, USA	Manufacturing and offices	59,500
Milwaukee, Wisconsin, USA	Manufacturing and offices	324,200
Racine, Wisconsin, USA	Manufacturing and offices	134,300	(3	)
Brno, Czech Republic	Manufacturing and offices	27,800
Neuffen, Germany	Manufacturing and offices	24,700
Nogales, Mexico	Manufacturing and offices	181,300
Bern, Switzerland	Manufacturing and offices	1,100	(4	)

(1) Leased facility. Lease term expires September 1, 2019.

(2) Leased facility. Lease term expires March 31, 2016, at which time it is expected to be renewed.

(3) Leased facility. Lease term expires December 31, 2025.

(4) Building is owned, but land is leased from the government, as required. Lease term expires October 18, 2021.

ITEM 3. LEGAL PROCEEDINGS

In the normal course of business, the Company is named in legal proceedings from time to time. There are currently no material legal proceedings pending with respect to the Company. The more significant legal proceedings are discussed below.

Like other companies in recent years, the Company is named as a defendant in numerous pending multi-claimant/multi-defendant lawsuits alleging personal injury as a result of exposure to asbestos, manufactured by third parties, and in the past may have been integrated into or sold with a very limited number of the Company’s products. The Company is vigorously defending itself against these claims. Although it is not possible to predict the ultimate outcome of these matters, the Company does not believe the ultimate resolution of these issues will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based in part on the fact that no claimant has proven or substantially demonstrated asbestos exposure caused by products manufactured or sold by the Company and that most of the cases have been voluntarily dismissed.

The Company is subject to contingencies related to environmental laws and regulations. Information about the Company's compliance with environmental regulations is included in Part I, Item 1 of this 2015 Annual Report on Form 10-K under the heading “Environmental Protection.”

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

PART II

ITEM 5. MARKET FOR THE REGISTRANT'S COMMON STOCK, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Information required by this Item is set forth in Note 11 “Unaudited: Quarterly Results of Operations, Common Stock Price and Dividends” in the Notes to Consolidated Financial Statements in Part II, Item 8 of this 2015 Annual Report on Form 10-K.

The following information in Item 5 of this Annual Report on Form 10-K is not deemed to be “soliciting material” or to be “filed” with the Securities and Exchange Commission or subject to Regulation 14A or 14C under the Securities Exchange Act of 1934, as amended, or to the liabilities of Section 18 of the Securities Exchange Act of 1934, as amended, and will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933, as amended, or the Securities Exchange Act of 1934, as amended, except to the extent the Company specifically incorporates it by reference into such a filing.

The following graph compares on a cumulative basis the yearly percentage change since January 1, 2011 in (a) the total shareholder return on the Common Stock with (b) the total return on the Russell 2000 Index, and (c) the total return of the peer group made up of 16 companies, including the Company, in similar industries and with similar market capitalization.

The graph assumes $100 invested on December 31, 2010. It further assumes the reinvestment of dividends. The returns of each component company in the peer groups have been weighted based on such company's relative market capitalization.



December 31		2010	2011	2012	2013	2014	2015
Badger Meter, Inc.	Return %		(32.27)%	63.98%	16.64%	10.43%	—%
	Cumulative $	$100.00	$67.73	$111.06	$129.54	$143.06	$143.06
Russell 2000 Index	Return %		(4.18)%	16.35%	38.82%	4.89%	(4.41)%
	Cumulative $	$100.00	$95.82	$111.49	$154.78	$162.35	$155.18
Peer Group	Return %		(8.81)%	28.04%	39.37%	0.27%	(10.40)%
	Cumulative $	$100.00	$91.19	$116.76	$162.74	$163.17	$146.20

The Peer Group consists of A.O. Smith Corp. (AOS), Badger Meter, Inc. (BMI), CIRCOR International, Inc. (CIR), CLARCOR Inc. (CLC), ESCO Technologies Inc. (ESE), Franklin Electric Co, Inc. (FELE), Fuel Systems Solutions, Inc. (FSYS), Gorman-Rupp Company (GRC), Itron, Inc. (ITRI), Lindsay Corporation (LNN), MFRI, Inc. (MFRI), Mueller Water Products (MWA), Northwest Pipe Company (NWPX) , Rexnord Corporation (RXN), Sun Hydraulics Corporation (SNHY), and Watts Water Technologies, Inc. (WTS).

ITEM 6. SELECTED FINANCIAL DATA

BADGER METER, INC.

Ten Year Summary of Selected Consolidated Financial Data



	Years ended December 31,
(In thousands except per share data)	2015	2014	2013	2012	2011	2010	2009	2008	2007	2006
Operating results
Net sales	$377,698	364,768	334,122	319,660	262,915	276,634	250,337	279,552	234,816	229,754
Research and development	$10,645	9,496	10,504	9,567	8,086	7,164	6,910	7,136	5,714	5,458
Earnings from continuing operations before income taxes	$41,152	44,912	38,009	43,471	27,349	44,438	42,333	39,555	29,325	27,489
Earnings from continuing operations	$25,938	29,678	24,617	28,032	19,161	28,662	26,780	25,084	18,386	16,568
Earnings (loss) from discontinued operations (1)	$ n/a	n/a	n/a	n/a	n/a	n/a	7,390	n/a	(1,929)	(9,020)
Net earnings	$25,938	29,678	24,617	28,032	19,161	28,662	34,170	25,084	16,457	7,548
Earnings from continuing operations to sales	6.9%	8.1%	7.4%	8.8%	7.3%	10.4%	10.7%	9.0%	7.8%	7.2%
Per Common share
Basic earnings from continuing operations	$1.80	2.07	1.71	1.96	1.28	1.92	1.81	1.72	1.29	1.19
Basic earnings (loss) from discontinued operations	$ n/a	n/a	n/a	n/a	n/a	n/a	0.50	n/a	(0.13)	(0.65)
Total basic earnings	$1.80	2.07	1.71	1.96	1.28	1.92	2.31	1.72	1.16	0.54
Diluted earnings from continuing operations	$1.80	2.06	1.70	1.95	1.27	1.91	1.79	1.69	1.26	1.15
Diluted earnings (loss) from discontinued operations	$ n/a	n/a	n/a	n/a	n/a	n/a	0.49	n/a	(0.13)	(0.63)
Total diluted earnings	$1.80	2.06	1.70	1.95	1.27	1.91	2.28	1.69	1.13	0.52
Cash dividends declared: Common Stock	$0.78	0.74	0.70	0.66	0.60	0.52	0.46	0.40	0.34	0.31
Price range - high	$65.87	60.91	56.36	48.60	45.47	45.49	44.90	62.74	46.43	32.20
Price range - low	$51.63	46.47	41.88	29.30	26.86	32.58	22.50	17.58	23.00	19.51
Closing price	$58.59	59.35	54.50	47.41	29.43	44.22	39.82	29.02	44.95	27.70
Book value *	$16.08	14.82	13.64	11.96	11.85	11.19	9.65	7.50	6.33	5.07
Shares outstanding at year-end
Common Stock	14,525	14,461	14,412	14,314	15,123	15,048	14,973	14,808	14,519	14,154
Financial position
Working capital *	$44,784	34,030	29,122	27,294	78,782	64,658	60,419	35,740	38,725	33,648
Current ratio *	1.4 to 1	1.3 to 1	1.3 to 1	1.3 to 1	4.5 to 1	3.0 to 1	3.3 to 1	1.7 to 1	1.9 to 1	1.7 to 1
Net cash provided by operations	$35,831	35,735	34,818	34,802	31,317	18,396	36,588	26,143	27,934	16,750
Capital expenditures	$19,766	12,332	14,311	8,202	5,336	9,238	7,750	13,237	15,971	11,060
Total assets	$355,480	341,158	316,058	290,453	218,910	215,864	191,016	195,358	150,301	139,383
Short-term and current portion of long-term debt	$71,360	75,927	70,045	66,730	1,790	12,878	8,003	19,670	13,582	17,037
Long-term debt	$ n/a	n/a	n/a	n/a	n/a	n/a	n/a	5,504	3,129	5,928
Shareholders' equity (2)	$232,275	214,331	196,563	171,247	179,281	168,383	144,461	111,023	91,969	71,819
Debt as a percent of total debt and equity *	23.5%	26.2%	26.3%	28.0%	1.0%	7.1%	5.2%	18.5%	15.4%	26.8%
Return on shareholders' equity *	11.2%	13.8%	12.5%	16.4%	10.7%	17.0%	18.5%	22.6%	20.0%	23.1%
Price/earnings ratio *	32.6	28.8	32.1	24.3	23.2	23.2	22.2	17.2	35.7	24.1

(1) The Company's French operations have been presented as discontinued operations through 2007, the years of ownership. In 2009, discontinued operations represented the recognition of previously unrecognized tax benefits for certain deductions that were taken on prior tax returns related to the shutdown of the Company's French operations.

(2) The Company adopted the provisions of the Financial Accounting Standards Board Accounting Standards Codification 715, “Compensation - Retirement Benefits” on December 31, 2006, with respect to recognizing the funded status of pension and postretirement benefit plans, and at December 31, 2008, with respect to changing the measurement date.

*Description of calculations as of the applicable year end:

Book value per share equals total shareholders' equity at year-end divided by the number of common shares outstanding.

Working capital equals total current assets less total current liabilities.

Current ratio equals total current assets divided by total current liabilities.

Debt as a percent of total debt and equity equals total debt (the sum of short-term debt, current portion of long-term debt and long-term debt) divided by the sum of total debt and total shareholders' equity at year-end. The debt of the discontinued French operations is included in this calculation through 2007, the years of ownership, although there was no debt at the end of 2007 related to the French operations.

Return on shareholders' equity equals earnings from continuing operations divided by total shareholders' equity at year-end.

Price/earnings ratio equals the year-end closing stock price for common stock divided by diluted earnings per share from continuing operations.

ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

BUSINESS DESCRIPTION AND OVERVIEW

Residential and commercial water meters are generally classified as either manually read meters or remotely read meters via radio technology. A manually read meter consists of a water meter and a register that provides a visual totalized meter reading. Meters equipped with radio technology (endpoints) receive flow measurement data from encoder registers attached to the water meter which is encrypted and transmitted via radio frequency to a receiver that collects and formats the data appropriately for water utility billing systems. These remotely read, or mobile, systems are either automatic meter reading (AMR) systems, where a vehicle equipped for meter reading purposes, including a radio receiver, computer and reading software, collects the data from utilities’ meters; or fixed network advanced metering infrastructure (AMI) systems, where data is gathered utilizing a network of permanent data collectors or gateway receivers that are always active or listening for the radio transmission from the utilities’ meters. AMI systems eliminate the need for utility personnel to drive through service territories to collect meter reading data. These systems provide the utilities with more frequent and diverse data at specified intervals from their meters.

The ORION family of radio endpoints provides water utilities with a range of industry-leading options for meter reading. These include ORION Mobile (for mobile meter reading), ORION Fixed Network (for traditional fixed network applications), and ORION Cellular (for infrastructure-free meter reading). ORION Mobile makes the migration to fixed

network easier for utilities that prefer to start with mobile reading and later adopt fixed network communications, allowing utilities to choose a solution for their current needs and be positioned for their future operational changes.

Critical to the water metering ecosystem is information and analytics. The Company’s BEACON AMA Managed Solution is the latest in metering technology. BEACON AMA combines the BEACON analytical software suite with proven ORION technologies using two-way fixed and cellular networks in a managed solution, improving utilities’ visibility of their water consumption and eliminating the need for costly utility managed infrastructure.

An industry leader in both mechanical and electrical flow metering technologies, the Company offers one of the broadest flow measurement, control and communication portfolios in the market. The portfolio carries respected brand names including Recordall, E-Series, ORION, Hedland, Dynasonics, Blancett, and Research Control, and includes eight of the ten major flow meter technologies. Customers rely on the Company for application-specific solutions that deliver accurate, timely and dependable flow data and control essential for product quality, cost control, safer operations, regulatory compliance, and more sustainable operations.

Business Trends

Increasingly, the electric utility industry relies on AMI technology for two-way communication to monitor and control electrical devices at the customer's site. Although the Company does not sell products for electric market applications, the trend toward AMI affects the markets in which the Company does participate, particularly for those customers in the water utility market that are interested in more frequent and diverse data collection. Specifically, AMI and AMA technologies enable water utilities to capture readings from each meter at more frequent and variable intervals. Similar to the electric utility industry in recent years, the water utility industry is beginning to see the adoption of ultrasonic meters. Ultrasonic water metering has lower barriers to entry which could affect the competitive landscape in North America.

The Company sells its technology solutions to meet customer requirements. Since the technology products have comparable margins, any change in the mix between AMR, AMI or AMA is not expected to have a significant impact on the Company's net sales related to meter reading technology.

There are approximately 52,000 water utilities in the United States and the Company estimates that less than 53% of them have converted to a radio solutions technology. With the BEACON AMA managed solution and the wide breadth of water meters, the Company believes it is well-positioned to meet customers' future needs.

In the global market, companies need to comply with increasing regulations requiring companies to better manage critical resources, monitor their use of hazardous materials, and reduce exhaust gases. Some customers measure fluids to identify leaks and/or misappropriation for cost control or add measurement points to help automate manufacturing. Other customers employ measurement to comply with government mandates and laws. The Company provides technology to measure water, hydrocarbon-based fluids, chemicals, gases and steams.

Flow measurements are critical to provide a baseline and quantify reductions as customers attempt to reduce consumption. Once water usage is better understood, a strategy for water-use reduction can be developed with specific water-reduction initiatives targeted to those areas where water reduction is most viable. With the Company’s technology, customers have found costly leaks, pinpointed equipment in need of repair, and identified areas for process improvements.

Acquisition

On August 17, 2015, the Company's wholly-owned subsidiary, National Meter and Automation, Inc. (“National Meter”), acquired the assets of United Utilities, Inc. of Smyrna, Tennessee, which was one of the Company's distributors serving Tennessee and Georgia. National Meter will do business in those and additional areas as “United Utilities.”

The total purchase consideration for the United Utilities assets was $3.3 million, which included $0.4 million in cash and settlement of $2.9 million of pre-existing Company receivables. The Company's allocation of the purchase price at December 31, 2015 included $0.8 million of receivables, $0.4 million of inventory, $0.1 million of property, plant and equipment, $1.7 million of intangibles and $0.3 million of goodwill. As of December 31, 2015, the Company had not completed its analysis for estimating the fair value of the assets acquired and liabilities assumed. This acquisition is further described in Note 3 “Acquisitions” in the Notes to Consolidated Financial Statements.

On October 1, 2014, the Company acquired 100% of the outstanding common stock of National Meter and Automation, Inc. of Centennial, Colorado. The purchase was estimated to add approximately $15 million of incremental annual revenues to Badger Meter, after eliminating what would be intercompany sales. National Meter was a major distributor of Badger Meter products for the municipal water utility market, serving customers in Arizona, California, Colorado, Nevada and southern Wyoming. National Meter has become a regional distribution center for Badger Meter. In addition to its primary product line of water meters and meter reading systems, National Meter provides services including meter testing, leak detection, water audits, and meter and meter reading system installation.

Revenue and Product Mix

As the industry continues to evolve, the Company has been vigilant in anticipating and exceeding customer expectations. In 2011, the Company introduced AMA as a hardware and software solution for water and gas utilities, and then in early 2014 launched its new BEACON AMA system as a managed solution which it believes will help maintain the Company's position as a market leader. Over the past two years, sales of BEACON AMA have grown more than eight-fold, with large cities and private water utilities selecting BEACON AMA and the Company’s industry-leading water meters.

The Company continues to seek opportunities for additional revenue enhancement. For instance, the Company is periodically asked to oversee and perform field installation of its products for certain customers. The Company assumes the role of general contractor, hiring installation subcontractors and supervising their work. The Company also supports its product and technology sales with the sale of extended service programs that provide additional services beyond the standard warranty. In recent years, the Company has sold ORION radio technology to natural gas utilities for installation on their gas meters. And most recently, the introduction of the BEACON AMA system opens the door to “software as a service” revenues. With the exception of a large sale of gas radios to one particular customer several years ago, revenues from such products and services are not yet significant and the Company is uncertain of the potential growth achievable for such products and services in future periods.

RESULTS OF OPERATIONS

Net Sales

Net sales in 2015 increased $12.9 million, or 3.5%, to $377.7 million from $364.8 million in 2014. The overall increase was the result of higher sales of municipal water meter and related products, offset somewhat by lower sales of flow instrumentation products.

Municipal water sales represented 75.0% of total sales in 2015. These sales increased $23.0 million, or 8.8%, to $283.1 million in 2015 compared to $260.1 million in 2014. Included in this increase was $12.8 million of incremental sales associated with the acquisition of National Meter on October 1, 2014 and the assets of United Utilities on August 17, 2015. Overall, residential sales increased, offset somewhat by lower commercial meter sales. Sales of residential meters and technology increased 12.5%, driven by higher sales volumes of the Company’s ORION products for both mechanical meters as well as the recently introduced E-Series ultrasonic meters. These were offset somewhat by lower volumes of Itron-related products. Commercial meter sales declined 6.7% for the year due to lower volumes of products sold.

Flow instrumentation sales represented 25.0% of sales in 2015. These sales declined $10.1 million, or 9.6%, to $94.6 million from $104.7 million in 2014. The decline was due to the strengthening U.S. dollar’s effect on sales of products sold in Euros, lower volumes of products sold to oil and natural gas customers related to the weak conditions in these markets, weather conditions for a portion of the year and general softness in the overall economy.

Net sales in 2014 increased $30.7 million, or 9.2%, to $364.8 million from $334.1 million in 2013. The overall increase was due primarily to higher sales of municipal water and flow instrumentation products as a result of higher volumes of units sold and the purchase of National Meter, offset slightly by lower sales of radios into the natural gas market.

Municipal water sales increased $29.0 million, or 12.5%, to $260.1 million in 2014 from $231.1 million in 2013. These sales represented 71.3% of total net sales in 2014 compared to 69.2% in 2013. Included in the increase for 2014 was $6.2 million of incremental sales associated with the acquisition of National Meter on October 1, 2014. The majority of the increase was due to higher sales of residential meters sold both with and without technology, as well as higher commercial meter sales. Sales of residential meters and related technology increased 14.6% for the year due to higher volumes of product sold, offset slightly by lower average prices. Commercial water meter sales increased 4.0% in 2014 compared to 2013 primarily due to higher volumes of product sold.

Flow instrumentation sales represented 28.7% of total net sales in 2014 compared to 30.8% in 2013. These sales increased $1.7 million, or 1.7%, to $104.7 million from $103.0 million in 2013. Most product lines in this grouping had higher sales driven primarily by higher volumes of product sold, offset by lower sales of radios into the natural gas market.

International sales for municipal water meters and related technologies are generally made to customers in Canada and Mexico, and more recently into the Middle East, which use similar mechanical technology and standards as customers in the U.S, although the recent introduction of ultrasonic meters allows the Company greater opportunities in other parts of the world.

International sales for flow instrumentation and specialty products are generally made throughout the world. In Europe, sales are made primarily in Euros. Other international sales are made in U.S. dollars or local currencies.

International sales increased 0.2% to $55.2 million in 2015 from $55.1 million in 2014. This was the net effect of increased sales of ultrasonic meters into the Middle East, offset by the strengthening U.S. dollar’s effect on sales made in foreign currencies, particularly the Euro.

International sales increased 24.9% to $55.1 million in 2014 from $44.1 million in 2013 primarily due to sales of ultrasonic meters into the Middle East, overall increases in sales internationally, and slightly favorable foreign currency translation effects.

Gross Margins

Gross margins as a percentage of sales were 35.9%, 36.0% and 35.0% for 2015, 2014 and 2013, respectively. The slight decrease in 2015 from the 2014 rate was the net impact of product mix due to lower sales of flow instrumentation products which generally carry higher margins, lower material costs primarily related to brass castings, and higher warranty, obsolete inventory and health care expenses.

The increase in 2014 from the 2013 rate was due to higher volumes of product sold, lower obsolescence expenses, lower raw material costs and favorable exchange rates, offset somewhat by a greater mix of municipal water products that carry lower margins than the flow instrumentation products, higher warranty costs, and the impacts of the integration of National Meter.

Operating Expenses

Selling, engineering and administration expenses in 2015 were $93.4 million, or 9.8% higher than these expenses in 2014. Included in this increase was $8.5 million of expenses associated with National Meter over the amount included in 2014, which only included expenses for the last three months of that year, and $0.3 million associated with United Utilities, from which assets were acquired in August 2015. Included in the 2014 expense were charges totaling $1.7 million (approximately $0.07 per diluted share) for due diligence and other transaction costs related to a potential acquisition that ultimately was not pursued. After considering these items, the remainder of the increase was due to higher software amortization expenses and higher health care costs, offset somewhat by lower employee incentive compensation.

Selling, engineering and administration expenses in 2014 were $85.1 million, or 9.3% higher than these expenses in 2013. Included in this increase was $2.5 million of expenses associated with National Meter, which was acquired in October 2014. Also included in 2014’s expense were charges totaling $1.7 million (approximately $0.07 per diluted share) for due diligence and other transaction costs related to a potential acquisition that ultimately was not pursued. The remainder of the increase was due to higher employee incentive compensation due to improved financial results and normal inflationary increases, offset somewhat by lower product development costs that returned to more historic levels.

Operating Earnings

Operating earnings in 2015 declined $3.6 million, or 7.8%, to $42.4 million from $46.0 million in 2014. The decline was the result of higher operating costs that were partially offset by a modest increase in sales.

Operating earnings in 2014 increased $6.9 million, or 17.6%, to $46.0 million compared with $39.1 million in 2013. The increase was the result of higher sales due to increased volumes of product sold at a higher gross profit percentage, offset somewhat by higher operating expenses.

Interest Expense, Net

Interest expense, net was $1.2 million in 2015 and $1.1 million in 2014 and 2013. Relatively stable interest rates and similar average borrowing levels have resulted in no significant variations in expenses.

Income Taxes

Income taxes as a percentage of earnings before income taxes were 37.0%, 33.9% and 35.2% for 2015, 2014 and 2013, respectively. The variances in all three years presented were due primarily to the changes in state taxes depending on each year’s sales, as well as the relationship of foreign and domestic incomes that were taxed at different rates. Particularly in

2015, the relationship of foreign and domestic incomes resulted in more domestic income taxed at higher rates, while 2014 had higher foreign income taxed at lower rates.

Earnings and Diluted Earnings per Share

Because of the decreased operating earnings and higher effective tax rate, net earnings were $25.9 million in 2015 compared to $29.7 million in 2014. On a diluted basis, earnings per share were $1.80 in 2015 compared to $2.06 in 2014.

Because of the increased operating earnings and the lower effective tax rate, net earnings were $29.7 million in 2014 compared to $24.6 million in 2013. On a diluted basis, earnings per share were $2.06 in 2014 compared to $1.70 in 2013.

LIQUIDITY AND CAPITAL RESOURCES

The main sources of liquidity for the Company are cash from operations and borrowing capacity. In addition, depending on market conditions, the Company may access the capital markets to strengthen its capital position and to provide additional liquidity for general corporate purposes. Cash provided by operations in 2015 was $35.8 million compared to $35.7 million in 2014. The adjustments to earnings, particularly higher amortization charges, more than offset the reduced net earnings.

Receivables at December 31, 2015 were $56.6 million compared to $54.0 million at the end of 2014. The increase was due primarily to the higher sales in the fourth quarter of 2015 compared to the same period in 2014. The Company believes its net receivables balance is fully collectible.

Inventories at December 31, 2015 were $78.6 million compared to $71.8 million at December 31, 2014. The increase was due primarily to the expansion of Company-owned distribution facilities in 2015, which included stocking inventory.

Property, plant and equipment increased as a net result of capital expenditures offset by depreciation expense. Capital expenditures totaled $19.8 million in 2015 compared to $12.3 million in 2014. These amounts vary due to the timing of capital expenditures and include $4.2 million, most of which was spent in 2015, for conversion of factory space to office space at the Company’s headquarters in Milwaukee, Wisconsin. The Company believes it has adequate capacity to increase production levels with minimal additional capital expenditures.

Intangible assets decreased to $57.3 million at December 31, 2015 from $61.7 million at December 31, 2014. This was the net impact of normal amortization expense, offset by the addition of $1.7 million associated with the purchase of the United Utilities assets. Also, as a result of that asset purchase, goodwill increased to $48.0 million at December 31, 2015 compared to $47.7 million at December 31, 2014.

Short-term debt decreased from $75.9 million at December 31, 2014 to $71.4 million at December 31, 2015 as the funds generated from operations were sufficient to cover investing and financing activities and allow some of the borrowings to be repaid. At the end of 2015, debt represented 23.5% of the Company’s total capitalization. None of the debt is secured by the Company’s assets.

Payables increased at December 31, 2015 to $19.2 million compared to $16.1 million at December 31, 2014. The increase was due to the timing of purchases and payments.

Accrued compensation and employee benefits decreased to $9.7 million at December 31, 2015 from $11.9 million at December 31, 2014 primarily due to lower accrued employee incentive compensation.

The overall increase in total shareholders’ equity from $214.3 million at December 31, 2014 to $232.3 million at December 31, 2015 was principally the result of net earnings and stock options exercised, offset by an increase in Accumulated Other Comprehensive Loss as a result of translation losses, and dividends paid.

The Company’s financial condition remains strong. In May 2014, the Company amended its May 2012 credit agreement with its primary lender to a three-year $105.0 million line of credit that supports commercial paper (up to $70.0 million) and includes $5.0 million of a Euro line of credit. While the facility is unsecured, there are a number of financial covenants with which the Company must comply, and the Company was in compliance as of December 31, 2015. The Company believes that its operating cash flows, available borrowing capacity, and its ability to raise capital provide adequate resources to fund ongoing operating requirements, future capital expenditures and the development of new products. The

Company continues to take advantage of its local commercial paper market and carefully monitors the current borrowing market. The Company had $41.2 million of unused credit lines available at December 31, 2015.

OFF-BALANCE SHEET ARRANGEMENTS

The Company had no off-balance sheet arrangements at December 31, 2015.

CONTRACTUAL OBLIGATIONS

In 2010, the Company restructured the outstanding debt of its Employee Savings and Stock Option Plan (the “ESSOP”) by loaning the ESSOP $0.5 million to repay a loan to a third party and loaning the ESSOP an additional $1.0 million to purchase additional shares of the Company's Common Stock for future 401(k) savings plan matches under a program that will expire on December 31, 2020. Under this program, the Company agreed to pay the principal and interest on the new loan amount of $1.5 million. The receivable from the ESSOP and the related obligation were therefore netted to zero on the Company's Consolidated Balance Sheets at December 31, 2015 and 2014. The terms of the loan call for equal payments of principal with the final payment due on December 31, 2020. At December 31, 2015, $0.8 million of the loan balance remains.

The following table includes the Company's significant contractual obligations as of December 31, 2015. There are no material undisclosed guarantees.



	Payments due by period
	Total		Less than 1 year		1-3 years		3-5 years		Beyond
	(In thousands)
Short-term debt	$	71,360	$	71,360	$	—	$	—	$	—
Operating leases	12,361		1,888		3,125		2,486		4,862
Total contractual obligations	$	83,721	$	73,248	$	3,125	$	2,486	$	4,862

Other than items included in the preceding table, as of December 31, 2015, the Company had no additional material purchase obligations other than those created in the ordinary course of business related to inventory and property, plant and equipment, which generally have terms of less than 90 days. The Company also has long-term obligations related to its pension and postretirement plans which are discussed in detail in Note 7 “Employee Benefit Plans” in the Notes to Consolidated Financial Statements in Part II, Item 8 of this 2015 Annual Report on Form 10-K. As of the most recent actuarial measurement date, the Company is not required to make a minimum contribution for its pension plan for the 2016 calendar year. Postretirement medical claims are paid by the Company as they are submitted, and they are anticipated to be $0.4 million in 2016 based on actuarial estimates; however, these amounts can vary significantly from year to year because the Company is self-insured.

CRITICAL ACCOUNTING POLICIES AND USE OF ESTIMATES

The Company's accounting policies are more fully described in Note 1 “Summary of Significant Accounting Policies” in the Notes to Consolidated Financial Statements in Part II, Item 8 of this 2015 Annual Report on Form 10-K. As discussed in Note 1, the preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. The Company's more significant estimates relate primarily to the following judgmental reserves: allowance for doubtful accounts, reserve for obsolete inventories, and warranty and after-sale costs reserve. Each of these reserves is evaluated quarterly and is reviewed with the Company's internal Disclosure Committee and the Audit and Compliance Committee of the Board of Directors. The basis for the reserve amounts is determined by analyzing the anticipated exposure for each account, and then selecting the most likely amount based upon historical experience and various other considerations that are believed to be reasonable under the circumstances. These methods have been used for all years in the presented financials and have been used consistently throughout each year. Actual results may differ from these estimates if actual experiences vary from the Company's assumptions.

The criteria used for calculating each of the reserve amounts vary by type of reserve. For the allowance for doubtful accounts reserve, significant past due balances are individually reviewed for collectability, while the balance of accounts are reviewed in conjunction with applying historical write-off ratios. The calculation for the obsolete inventories reserve is determined by analyzing the relationship between the age and quantity of items on hand versus estimated usage to determine if excess quantities exist. The calculation for warranty and after-sale costs reserve uses criteria that include known potential problems on past sales as well as historical claim experience and current warranty trends. The changes in the balances of these

reserves at December 31, 2015 compared to the prior year were due to normal business conditions and are not deemed to be significant. While the Company continually tries to improve its estimates, no significant changes in the underlying processes are expected in 2016.

The Company also uses estimates in four other significant areas: (i) pension and other postretirement obligations and costs, (ii) stock-based compensation, (iii) income taxes, and (iv) evaluating goodwill at least annually for impairment. The actuarial valuations of benefit obligations and net periodic benefit costs rely on key assumptions including discount rates and long-term expected returns on plan assets. The Company's discount rate assumptions for its pension and postretirement plans are based on the average yield of a hypothetical high quality bond portfolio with maturities that approximately match the estimated cash flow needs of the plans. The assumptions for expected long-term rates of return on assets for its pension plan are based on historical experience and estimated future investment returns, taking into consideration anticipated asset allocations, investment strategies and the views of various investment professionals. The total cost of the Company's stock-based awards is equal to the grant date fair value per award multiplied by the number of awards granted, adjusted for forfeitures. Forfeitures are initially estimated based on historical Company information and subsequently updated over the life of the awards to ultimately reflect actual forfeitures, which could have an impact on the amount of stock compensation cost recognized from period to period. The grant date fair value of stock options relies on assumptions including the risk-free interest rate, dividend yield, market volatility and expected option life. In calculating the provision for income taxes on an interim basis, the Company uses an estimate of the annual effective tax rate based upon the facts and circumstances known at each interim period. On a quarterly basis, the actual effective tax rate is adjusted as appropriate based upon the actual results compared to those forecasted at the beginning of the fiscal year. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The reserve for uncertainty in income taxes is a matter of judgment based on an evaluation of the individual facts and circumstances of each tax position in light of all available evidence, including historic data and current trends. A tax benefit is recognized when it is “more likely than not” to be sustained based solely on the technical merits of each tax position. The Company evaluates and updates all of these assumptions quarterly. Goodwill impairment, if any, is determined by comparing the fair value of the reporting unit with its carrying value and is reviewed at least annually. Actual results may differ from these estimates.

OTHER MATTERS

The Company is subject to contingencies related to environmental laws and regulations. The Company is named as one of many potentially responsible parties in two landfill lawsuits. The landfill sites are impacted by the Federal Comprehensive Environmental Response, Compensation and Liability Act and other environmental laws and regulations. At this time, the Company does not believe the ultimate resolution of these matters will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based on the Company’s assessment of its limited past involvement with these landfill sites as well as the substantial involvement of and government focus on other named third parties with these landfill sites. However, due to the inherent uncertainties of such proceedings, the Company cannot predict the ultimate outcome of any of these matters. A future change in circumstances with respect to these specific matters or with respect to sites formerly or currently owned or operated by the Company, off-site disposal locations used by the Company, and property owned by third parties that is near such sites, could result in future costs to the Company and such amounts could be material. Expenditures for compliance with environmental control provisions and regulations during 2015, 2014 and 2013 were not material.

See the “Special Note Regarding Forward Looking Statements” at the front of this Annual Report on Form 10-K and Part I, Item 1A “Risk Factors” in this Annual Report on Form 10-K for the year ended December 31, 2015 for a discussion of risks and uncertainties that could impact the Company's financial performance and results of operations.

MARKET RISKS

In the ordinary course of business, the Company is exposed to various market risks. The Company operates in an environment where competition varies from moderate to intense. The Company believes it currently provides the leading technology in water meters and radio systems for water utilities. A number of the Company's competitors in certain markets have greater financial resources. Competitors also include alliance partners that sell products that do or may compete with our products, particularly those that provide radio solutions. As the global water metering market begins to shift to adopt ultrasonic (electronic) technology, the number of competitors may increase. In addition, the market's level of acceptance of the Company's newer product offerings, including the BEACON AMA system, may have a significant effect on the Company's results of operations. As a result of significant research and development activities, the Company enjoys favorable patent positions for several of its products.

The Company's ability to generate operating income and to increase profitability depends somewhat on the general health of the United States and foreign economies, including to some extent such things as the length and severity of global economic downturns; the timing and size of governmental programs such as stimulus fund programs, as well as the impact of government budget cuts or partial shutdowns of governmental operations; international or civil conflicts that affect international trade; the ability of municipal water utility customers to authorize and finance purchases of the Company's products; the Company's ability to obtain financing; housing starts in the United States; and overall industrial activity. In addition, changes in governmental laws and regulations, particularly laws dealing with the content or handling of materials, may impact the results of operations. These factors are largely beyond the Company's control and depend on the economic condition and regulatory environment of the geographic region of the Company's operations.

The Company relies on single suppliers for certain castings and components in several of its product lines. Although alternate sources of supply exist for these items, the loss of certain suppliers could temporarily disrupt operations in the short term. The Company attempts to mitigate these risks by working closely with key suppliers, purchasing minimal amounts from alternative suppliers and by purchasing business interruption insurance where appropriate.

The Company's foreign currency risk relates to the sales of products to foreign customers and purchases of material from foreign vendors. The Company uses lines of credit with U.S. and European banks to offset currency exposure related to European receivables and other monetary assets. As of December 31, 2015 and 2014, the Company's foreign currency net monetary assets were partially offset by comparable debt resulting in no material exposure to the results of operations. The Company believes the effect of a change in foreign currency rates will not have a material adverse effect on the Company's financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole.

The Company typically does not hold or issue derivative instruments and has a policy specifically prohibiting the use of such instruments for trading purposes.

The Company's short-term debt on December 31, 2015 was floating rate debt with market values approximating carrying value. Future annual interest costs for short-term debt will fluctuate based upon short-term interest rates. For the short-term debt on hand on December 31, 2015, the effect of a 1% change in interest rates is approximately $0.7 million.

ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Information required by this Item is set forth in Part II, Item 7 “Management's Discussion and Analysis of Financial Condition and Results of Operations” under the heading “Market Risks” in this 2015 Annual Report on Form 10-K.

ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTAL DATA

BADGER METER, INC.

Management's Annual Report on Internal Control over Financial Reporting

The Company's management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Rule 13a-15(f) under the Securities Exchange Act of 1934. The Company's internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with U.S. generally accepted accounting principles.

Due to its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

The Company's management assessed the effectiveness of the Company's internal control over financial reporting as of December 31, 2015 using the criteria set forth in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 Framework). Based on this assessment, the Company's management believes that, as of December 31, 2015, the Company's internal control over financial reporting was effective based on those criteria.

Ernst & Young LLP, an independent registered public accounting firm, has audited the Consolidated Financial Statements included in this Annual Report on Form 10-K and, as part of its audit, has issued an attestation report, included herein, on the effectiveness of the Company's internal control over financial reporting.

BADGER METER, INC.

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders of Badger Meter, Inc.

We have audited Badger Meter, Inc.’s (the “Company”) internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) (the COSO criteria). Badger Meter, Inc.’s management is responsible for maintaining effective internal control over financial reporting, and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management’s Annual Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, testing and evaluating the design and operating effectiveness of internal control based on the assessed risk, and performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Badger Meter, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2015, based on the COSO criteria.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Badger Meter, Inc. as of December 31, 2015 and 2014, and the related consolidated statements of operations, comprehensive income, shareholders’ equity and cash flows for each of the three years in the period ended December 31, 2015 and our report dated February 26, 2016, expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Milwaukee, Wisconsin

February 26, 2016

BADGER METER, INC.

Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders of Badger Meter, Inc.

We have audited the accompanying consolidated balance sheets of Badger Meter, Inc. (the “Company”) as of December 31, 2015 and 2014, and the related consolidated statements of operations, comprehensive income, shareholders' equity and cash flows for each of the three years in the period ended December 31, 2015. These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the consolidated financial position of Badger Meter, Inc. at December 31, 2015 and 2014, and the consolidated results of its operations and its cash flows for each of the three years in the period ended December 31, 2015, in conformity with U.S. generally accepted accounting principles.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Badger Meter, Inc.’s internal control over financial reporting as of December 31, 2015, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (2013 framework) and our report dated February 26, 2016 expressed an unqualified opinion thereon.

/s/ Ernst & Young LLP

Milwaukee, Wisconsin

February 26, 2016

BADGER METER, INC.

Consolidated Balance Sheets



	December 31,
	2015			2014
Assets	(Dollars in thousands)
Current assets:
Cash	$	8,163		$	6,656
Receivables	56,643			53,967
Inventories:
Finished goods	28,548			25,362
Work in process	13,184			13,047
Raw materials	36,864			33,365
Total inventories	78,596			71,774
Prepaid expenses and other current assets	5,926			4,538
Deferred income taxes	—			4,170
Total current assets	149,328			141,105
Property, plant and equipment, at cost:
Land and improvements	9,033			9,182
Buildings and improvements	59,839			57,872
Machinery and equipment	125,197			110,346
	194,069			177,400
Less accumulated depreciation	(103,149		)	(95,594		)
Net property, plant and equipment	90,920			81,806
Intangible assets, at cost less accumulated amortization	57,348			61,672
Prepaid pension	—			456
Other assets	8,485			8,397
Deferred income taxes	1,421			—
Goodwill	47,978			47,722
Total assets	$	355,480		$	341,158
Liabilities and Shareholders’ Equity
Current liabilities:
Short-term debt	$	71,360		$	75,927
Payables	19,155			16,059
Accrued compensation and employee benefits	9,663			11,901
Warranty and after-sale costs	3,133			1,739
Income and other taxes	1,233			1,449
Total current liabilities	104,544			107,075
Other long-term liabilities	4,809			1,735
Deferred income taxes	774			6,399
Accrued non-pension postretirement benefits	5,709			6,342
Other accrued employee benefits	7,369			5,276
Commitments and contingencies (Note 6)
Shareholders’ equity:
Common Stock, $1 par; authorized 40,000,000 shares; issued 20,551,269 shares in 2015 and 20,522,864 shares in 2014	20,551			20,523
Capital in excess of par value	52,178			48,353
Reinvested earnings	204,044			189,365
Accumulated other comprehensive loss	(12,780		)	(11,856		)
Less: Employee benefit stock	(768		)	(922		)
Treasury stock, at cost; 6,026,447 shares in 2015 and 6,061,671 shares in 2014	(30,950		)	(31,132		)
Total shareholders’ equity	232,275			214,331
Total liabilities and shareholders’ equity	$	355,480		$	341,158

See accompanying notes.

BADGER METER, INC.

Consolidated Statements of Operations



	Years ended December 31,
	2015		2014		2013
	(In thousands except per share amounts)
Net sales	$	377,698	$	364,768	$	334,122
Cost of sales	241,922		233,626		217,133
Gross margin	135,776		131,142		116,989
Selling, engineering and administration	93,407		85,095		77,882
Operating earnings	42,369		46,047		39,107
Interest expense, net	1,217		1,135		1,098
Earnings before income taxes	41,152		44,912		38,009
Provision for income taxes	15,214		15,234		13,392
Net earnings	$	25,938	$	29,678	$	24,617

Earnings per share:
Basic	$	1.80	$	2.07	$	1.71

Diluted	$	1.80	$	2.06	$	1.70

Shares used in computation of earnings per share:
Basic	14,379		14,307		14,362
Impact of dilutive securities	68		71		78
Diluted	14,447		14,378		14,440

See accompanying notes.

BADGER METER, INC.

Consolidated Statements of Comprehensive Income



	Years ended December 31,
	2015			2014			2013
	(Dollars in thousands)
Net earnings	$	25,938		$	29,678		$	24,617
Other comprehensive income :
Foreign currency translation adjustment	(847		)	(1,721		)	172
Pension and postretirement benefits, net of tax	(77		)	(2,611		)	6,252
Comprehensive income	$	25,014		$	25,346		$	31,041

See accompanying notes.

BADGER METER, INC.

Consolidated Statements of Cash Flows



	Years ended December 31,
	2015			2014			2013
	(Dollars in thousands)
Operating activities:
Net earnings	$	25,938		$	29,678		$	24,617
Adjustments to reconcile net earnings to net cash provided by operations:
Depreciation	9,993			8,891			8,512
Amortization	10,606			6,773			4,982
Deferred income taxes	(3,023		)	(1,334		)	1,462
Noncurrent employee benefits	1,261			4,417			1,392
Stock-based compensation expense	1,541			1,449			1,388
Changes in:
Receivables	(5,511		)	(997		)	(3,991		)
Inventories	(7,116		)	(6,943		)	247
Prepaid expenses and other current assets	(1,632		)	(2,060		)	368
Liabilities other than debt	3,774			(4,139		)	(4,159		)
Total adjustments	9,893			6,057			10,201
Net cash provided by operations	35,831			35,735			34,818
Investing activities:
Property, plant and equipment additions	(19,766		)	(12,332		)	(14,311		)
Acquisitions, net of cash acquired	(1,907		)	(20,829		)	(15,401		)
Net cash used for investing activities	(21,673		)	(33,161		)	(29,712		)
Financing activities:
Net (decrease) increase in short-term debt	(3,960		)	6,653			3,205
Dividends paid	(11,261		)	(10,633		)	(10,004		)
Proceeds from exercise of stock options	1,641			730			1,640
Tax benefit on stock options	141			38			382
Issuance of treasury stock	470			469			498
Net cash used for financing activities	(12,969		)	(2,743		)	(4,279		)
Effect of foreign exchange rates on cash	318			(438		)	(118		)
Increase (decrease) in cash	1,507			(607		)	709
Cash — beginning of year	6,656			7,263			6,554
Cash — end of year	$	8,163		$	6,656		$	7,263
Supplemental disclosures of cash flow information:
Cash paid during the year for:
Income taxes	$	18,167		$	17,218		$	15,292
Interest	$	1,246		$	1,144		$	1,114
Non cash transaction:
Settlement of National Meter and Automation, Inc. payables prior to the acquisition	$	—		$	2,623		$	—
Settlement of United Utilities, Inc. payables prior to the acquisition	$	2,866		$	—		$	—

See accompanying notes.

BADGER METER, INC.

Consolidated Statements of Shareholders’ Equity



	Years ended December 31,
	Common Stock at $1 par value*		Capital in excess of par value		Reinvested earnings			Accumulated other comprehensive income (loss)			Employee benefit stock			Treasury stock			Total
	(In thousands except per share amounts)
Balance, December 31, 2012	$	20,441	$	41,755	$	155,694		$	(13,948	)	$	(1,234	)	$	(31,461	)	$	171,247
Net earnings	—		—		24,617			—			—			—			24,617
Pension and postretirement benefits (net of $(3,826) tax effect)	—		—		—			6,252			—			—			6,252
Foreign currency translation	—		—		—			172			—			—			172
Cash dividends of $0.70 per share	—		—		(9,993		)	—			—			—			(9,993		)
Stock options exercised	63		1,577		—			—			—			—			1,640
Tax benefit on stock options and dividends	—		382		—			—			—			—			382
ESSOP transactions	—		201		—			—			159			—			360
Stock-based compensation	—		1,388		—			—			—			—			1,388
Issuance of treasury stock (35 shares)	—		324		—			—			—			174			498
Balance, December 31, 2013	20,504		45,627		170,318			(7,524		)	(1,075		)	(31,287		)	196,563
Net earnings	—		—		29,678			—			—			—			29,678
Pension and postretirement benefits (net of $(1,381) tax effect)	—		—		—			(2,611		)	—			—			(2,611		)
Foreign currency translation	—		—		—			(1,721		)	—			—			(1,721		)
Cash dividends of $0.74 per share	—		—		(10,631		)	—			—			—			(10,631		)
Stock options exercised	19		711		—			—			—			—			730
Tax benefit on stock options and dividends	—		38		—			—			—			—			38
ESSOP transactions	—		214		—			—			153			—			367
Stock-based compensation	—		1,449		—			—			—			—			1,449
Issuance of treasury stock (30 shares)	—		314		—			—			—			155			469
Balance, December 31, 2014	20,523		48,353		189,365			(11,856		)	(922		)	(31,132		)	214,331
Net earnings	—		—		25,938			—			—			—			25,938
Pension and postretirement benefits (net of $(122) tax effect)	—		—		—			(77		)	—			—			(77		)
Foreign currency translation	—		—		—			(847		)	—			—			(847		)
Cash dividends of $0.78 per share	—		—		(11,259		)	—			—			—			(11,259		)
Stock options exercised	28		1,546		—			—			—			67			1,641
Tax benefit on stock options and dividends	—		141		—			—			—			—			141
ESSOP transactions	—		242		—			—			154			—			396
Stock-based compensation	—		1,541		—			—			—			—			1,541
Issuance of treasury stock (35 shares)	—		355		—			—			—			115			470
Balance, December 31, 2015	$	20,551	$	52,178	$	204,044		$	(12,780	)	$	(768	)	$	(30,950	)	$	232,275


*	Each common share of stock equals $1 par value; therefore, the number of common shares is the same as the dollar value.

See accompanying notes.

BADGER METER, INC.

Notes to Consolidated Financial Statements

December 31, 2015, 2014 and 2013

Note 1 Summary of Significant Accounting Policies

Profile

Consolidation

The consolidated financial statements include the accounts of the Company and its wholly owned subsidiaries. All intercompany transactions have been eliminated in consolidation.

Receivables

Receivables consist primarily of trade receivables. The Company does not require collateral or other security and evaluates the collectability of its receivables based on a number of factors. An allowance for doubtful accounts is recorded for significant past due receivable balances based on a review of the past due items and the customer's ability and likelihood to pay, as well as applying a historical write-off ratio to the remaining balances. Changes in the Company's allowance for doubtful accounts are as follows:



	Balance at beginning of year		Provision and reserve adjustments			Write-offs less recoveries			Balance at end of year
	(In thousands)
2015	$	811	$	(152	)	$	(182	)	$	477
2014	$	531	$	305		$	(25	)	$	811
2013	$	488	$	78		$	(35	)	$	531

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Inventories

Inventories are valued at the lower of cost or market. Cost is determined using the first-in, first-out method. The Company estimates and records provisions for obsolete inventories. Changes to the Company's obsolete inventories reserve are as follows:



	Balance at beginning of year		Net additions charged to earnings		Disposals			Balance at end of year
	(In thousands)
2015	$	3,314	$	2,530	$	(2,008	)	$	3,836
2014	$	4,236	$	974	$	(1,896	)	$	3,314
2013	$	2,880	$	2,322	$	(966	)	$	4,236

Property, Plant and Equipment

Property, plant and equipment are stated at cost. Depreciation is provided over the estimated useful lives of the respective assets by the straight-line method. The estimated useful lives of assets are: for land improvements, 15 years; for buildings and improvements, 10 — 39 years; and for machinery and equipment, 3 — 20 years.

Capitalized Software and Hardware

Capitalized internal use software and hardware included in prepaid expenses and other current assets in the Consolidated Balance Sheets were $2.0 million and $1.2 million at December 31, 2015 and 2014, respectively. In addition, there was $5.0 million and $4.9 million at December 31, 2015 and 2014, respectively, included in other assets in the Consolidated Balance Sheets. These amounts are amortized on a straight-line basis over the estimated useful lives of the software and/or hardware, ranging from 1 to 5 years. Amortization expense recognized for the years ending December 31, 2015, 2014 and 2013 was $2.4 million, $1.4 million and $1.1 million, respectively.

Long-Lived Assets

Property, plant and equipment and identifiable intangible assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount may not be recoverable. If the sum of the expected undiscounted cash flows is less than the carrying value of the related asset or group of assets, a loss is recognized for the difference between the fair value and carrying value of the asset or group of assets. No adjustments were recorded as a result of these reviews during 2015, 2014 and 2013.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Intangible Assets

Intangible assets are amortized on a straight-line basis over their estimated useful lives, ranging from 5 to 20 years. The Company does not have any intangible assets deemed to have indefinite lives. Amortization expense recognized for the years ending December 31, 2015, 2014 and 2013 was $6.1 million, $5.5 million and $5.0 million, respectively. Amortization expense expected to be recognized is $6.1 million in each of 2016 and 2017, $5.9 million in 2018, $5.8 million in each of 2019 and 2020, and $27.7 million thereafter. The carrying value and accumulated amortization by major class of intangible assets are as follows:



	December 31, 2015				December 31, 2014
	Gross carrying amount		Accumulated amortization		Gross carrying amount		Accumulated amortization
	(In thousands)
Technologies	$	47,157	$	16,104	$	47,157	$	13,244
Non-compete agreements	2,062		1,455		2,022		1,243
Licenses	650		441		650		424
Customer lists	4,923		1,327		3,423		1,053
Customer relationships	20,690		5,494		20,700		3,575
Trade names	9,475		2,788		9,325		2,066
Total intangibles	$	84,957	$	27,609	$	83,277	$	21,605

Goodwill

Goodwill is tested for impairment annually during the fourth fiscal quarter or more frequently if an event indicates that the goodwill might be impaired. Potential impairment is identified by comparing the fair value of a reporting unit with its carrying value. No adjustments were recorded to goodwill as a result of these reviews during 2015, 2014 and 2013.

Goodwill was $48.0 million, $47.7 million and $44.7 million at December 31, 2015, 2014 and 2013, respectively. The increases were the result of the asset purchase of United Utilities Inc. of Smyrna, Tennessee in 2015, and the National Meter and Automation, Inc. of Centennial, Colorado acquisition in 2014. These acquisitions are further described in Note 3 “Acquisitions.”

Revenue Recognition

Revenues are generally recognized upon shipment of product, which corresponds with the transfer of title. The costs of shipping are generally billed to the customer upon shipment and are included in cost of sales. A small portion of the Company's sales includes shipments of products combined with services, such as meters sold with installation. The product and installation components of these multiple deliverable arrangements are considered separate units of accounting. The value of these separate units of accounting is determined based on their relative fair values determined on a stand-alone basis. Revenue is generally recognized when the last element of the multiple deliverable is delivered, which corresponds with installation and acceptance by the customer. The Company also sells a small number of extended support service agreements on certain products for the period subsequent to the normal support service provided with the original product sale. Revenue is recognized over the service agreement period, which is generally one year. In 2014, the company began offering software as a service with its BEACON AMA product. While the amounts were insignificant in 2014 and 2015, revenue for this service is recognized on a monthly basis as the service is performed.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Warranty and After-Sale Costs

The Company estimates and records provisions for warranties and other after-sale costs in the period in which the sale is recorded, based on a lag factor and historical warranty claim experience. After-sale costs represent a variety of activities outside of the written warranty policy, such as investigation of unanticipated problems after the customer has installed the product, or analysis of water quality issues. Changes in the Company's warranty and after-sale costs reserve are as follows:



	Balance at beginning of year		Net additions charged to earnings		Costs incurred and adjustments			Balance at end of year
	(In thousands)
2015	$	1,739	$	2,837	$	(1,443	)	$	3,133
2014	$	882	$	2,512	$	(1,655	)	$	1,739
2013	$	881	$	1,069	$	(1,068	)	$	882

Research and Development

Research and development costs are charged to expense as incurred and amounted to $10.6 million, $9.5 million and $10.5 million in 2015, 2014 and 2013, respectively.

Stock-Based Compensation Plans

As of December 31, 2015, the Company has an Omnibus Incentive Plan under which 700,000 shares are reserved for restricted stock and stock option grants for employees as well as stock grants for directors as described in Note 5 “Stock Compensation.” The plan was approved in 2011 and replaced all prior stock-based plans except for shares and options previously issued under those plans.

The Company recognizes the cost of stock-based awards in net earnings for all of its stock-based compensation plans on a straight-line basis over the service period of the awards. The Company estimates the fair value of its option awards using the Black-Scholes option-pricing formula, and records compensation expense for stock options ratably over the stock option grant's vesting period. The Company values restricted stock and stock grants for directors on the closing price of the Company's stock on the day the grant was awarded. Total stock compensation expense recognized by the Company was $1.5 million for 2015 and $1.4 million for each of 2014 and 2013.

Healthcare

The Company estimates and records provisions for healthcare claims incurred but not reported, based on medical cost trend analysis, reviews of subsequent payments made and estimates of unbilled amounts.

Accumulated Other Comprehensive Loss

Components of accumulated other comprehensive loss at December 31, 2015 are as follows:



	Pension and postretirement benefits			Foreign currency			Total
				(In thousands)
Balance at beginning of period	$	(11,891	)	$	35		$	(11,856	)
Other comprehensive income before reclassifications	(1,317		)	(847		)	(2,164		)
Amounts reclassified from accumulated other comprehensive loss, net of tax of $(0.7) million	1,240			—			1,240
Net current period other comprehensive loss, net	(77		)	(847		)	(924		)
Accumulated other comprehensive loss	$	(11,968	)	$	(812	)	$	(12,780	)

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Details of reclassifications out of accumulated other comprehensive loss during 2015 are as follows:



	Amount reclassified from accumulated other comprehensive loss
	(In thousands)
Amortization of employee benefit plan items:
Prior service cost (1)	$	53
Settlement expense (1)	762
Amortization of actuarial loss (1)	1,153
Total before tax	1,968
Income tax benefit	(728		)
Amount reclassified out of accumulated other comprehensive loss	$	1,240


(1)	These accumulated other comprehensive loss components are included in the computation of benefit plan costs in Note 7 “Employee Benefit Plans.”

Components of accumulated other comprehensive loss at December 31, 2014 are as follows:



	Pension and postretirement benefits			Foreign currency			Total
	(In thousands)
Balance at beginning of period	$	(9,280	)	$	1,756		$	(7,524	)
Other comprehensive income before reclassifications	(4,968		)	(1,721		)	(6,689		)
Amounts reclassified from accumulated other comprehensive loss, net of tax of $(1.2) million	2,357			—			2,357
Net current period other comprehensive loss, net	(2,611		)	(1,721		)	(4,332		)
Accumulated other comprehensive (loss) income	$	(11,891	)	$	35		$	(11,856	)

Details of reclassifications out of accumulated other comprehensive loss during 2014 are as follows:



	Amount reclassified from accumulated other comprehensive loss
	(In thousands)
Amortization of employee benefit plan items:
Prior service cost (1)	$	161
Settlement expense (1)	858
Amortization of actuarial loss (1)	2,547
Total before tax	3,566
Income tax benefit	(1,209		)
Amount reclassified out of accumulated other comprehensive loss	$	2,357


(1)	These accumulated other comprehensive loss components are included in the computation of benefit plan costs in Note 7 “Employee Benefit Plans.”

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Use of Estimates

The preparation of financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the financial statements and accompanying notes. Actual results could differ from those estimates.

Fair Value Measurements of Financial Instruments

The carrying amounts of cash, receivables and payables in the financial statements approximate their fair values due to the short-term nature of these financial instruments. Short-term debt is comprised of notes payable drawn against the Company's lines of credit and commercial paper. Because of its short-term nature, the carrying amount of the short-term debt also approximates fair value. Included in other assets are insurance policies on various individuals who were associated with the Company. The carrying amounts of these insurance policies approximate their fair value.

Subsequent Events

The Company evaluates subsequent events at the date of the balance sheet as well as conditions that arise after the balance sheet date but before the financial statements are issued. The effects of conditions that existed at the date of the balance sheet date are recognized in the financial statements. Events and conditions arising after the balance sheet date but before the financial statements are issued are evaluated to determine if disclosure is required to keep the financial statements from being misleading. To the extent such events and conditions exist, if any, disclosures are made regarding the nature of events and the estimated financial effects for those events and conditions. For purposes of preparing the accompanying consolidated financial statements and the notes to these financial statements, the Company evaluated subsequent events through the date the accompanying financial statements were issued.

New Pronouncements

In November 2015, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) No. 2015-17, Balance Sheet Classification of Deferred Taxes, requiring all deferred tax assets and liabilities, and any related valuation allowance, to be classified as non-current on the balance sheet. The classification change for all deferred taxes as non-current simplifies entities' processes as it eliminates the need to separately identify the net current and net non-current deferred tax asset or liability in each jurisdiction and allocate valuation allowances. The standard will be effective for financial statements issued for annual periods beginning after December 15, 2016, and interim periods within those annual periods. Early adoption is permitted for financial statements that have not been previously issued, and the ASU may be applied either prospectively to all deferred tax assets and liabilities or retrospectively to all periods presented. The guidance was adopted in the fourth quarter of 2015 on a prospective basis. The adoption did not have a material impact on the Company's financial condition or results of operations other than the presentation of deferred taxes on the Consolidated Balance Sheets.

In May 2014, the FASB issued ASU No. 2014-09 “Revenue from Contracts with Customers.” ASU 2014-09 provides a single principles-based, five-step model to be applied to all contracts with customers. The five steps are to identify the contract(s) with the customer, to identify the performance obligations in the contract, to determine the transaction price, to allocate the transaction price to the performance obligations in the contract and to recognize revenue when each performance obligation is satisfied. Revenue will be recognized when promised goods or services are transferred to the customer in an amount that reflects the consideration expected in exchange for those goods or services.

In April 2015, the FASB tentatively agreed to delay the effective date of ASU 2014-09 for one year and to permit early adoption by entities as of the original effective dates. In July 2015, the FASB affirmed its proposal to defer the effective date of the ASU, which has since been issued in August 2015. Considering the one year deferral, ASU 2014-09 will be effective for the Company beginning on January 1, 2018 and the standard allows for either full retrospective adoption or modified retrospective adoption. The Company is continuing to evaluate the impact that the adoption of this guidance will have on its financial condition, results of operations and the presentation of its financial statements.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Note 2 Common Stock

Common Stock and Rights Agreement

The Company has Common Stock and also Common Share Purchase Rights that trade with the Common Stock. The Common Share Purchase Rights were issued pursuant to the shareholder rights plan discussed below.

On February 15, 2008, the Board of Directors of the Company adopted a shareholder rights plan and declared a dividend of one Common Share Purchase Right for each outstanding share of Common Stock of the Company payable to the shareholders of record on May 26, 2008. The plan was effective as of May 27, 2008. Each right entitles the registered holder to purchase from the Company one share of Common Stock at a price of $200.00 per share, subject to adjustment. Subject to certain conditions, the rights are redeemable by the Company and are exchangeable for shares of Common Stock at a favorable price. The rights have no voting power and unless the rights are redeemed, exchanged or terminated earlier, they will expire on May 26, 2018. The rights are an embedded feature of the Company’s Common Stock and not a free-standing instrument, and therefore, do not require separate accounting treatment.

Stock Options

Stock options to purchase 47,572 shares of the Company's Stock in 2015, 47,067 shares in 2014 and 23,258 shares in 2013 were not included in the computation of dilutive securities because their inclusion would have been anti-dilutive.

Note 3 Acquisitions

The total purchase consideration for the United Utilities assets was $3.3 million, which included $0.4 million in cash and settlement of $2.9 million of pre-existing Company receivables. The Company's allocation of the purchase price at December 31, 2015 included $0.8 million of receivables, $0.4 million of inventory, $0.1 million of property, plant and equipment, $1.7 million of intangibles and $0.3 million of goodwill. The intangible assets acquired are primarily customer relationships with an estimated average useful life of 12 years. The preliminary allocation of the purchase price to the assets acquired was based upon the estimated fair values at the date of acquisition. As of December 31, 2015, the Company had not completed its analysis for estimating the fair value of the assets acquired.

The United Utilities acquisition was accounted for under the purchase method, and accordingly, the results of operations were included in the Company's financial statements from the date of acquisition. The acquisition did not have a material impact on the Company's consolidated financial statements or the notes thereto at December 31, 2015.

The total purchase consideration for National Meter was $22.9 million, which included $20.3 million in cash, a small working capital adjustment and settlement of pre-existing Company receivables. The Consolidated Balance Sheets at December 31, 2014 included $2.5 million of deferred payments, of which $2.0 million was payable in late 2015 and early 2016 and was recorded in payables, and $0.5 million which is payable in early 2017 and was recorded in other long-term liabilities. The Company’s allocation of the purchase price as of December 31, 2014 included $3.9 million of receivables, $4.5 million of inventory, $2.8 million of property, plant and equipment, $9.8 million of intangibles, $3.0 million of goodwill, and $0.1 million of current liabilities. As of December 31, 2014, the preliminary allocation of the purchase price to the assets acquired and liabilities assumed was based upon the estimated fair values at the date of acquisition. The intangible assets acquired are primarily customer relationships with an estimated average useful life of 12 years. The preliminary allocation of the purchase

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

price to the assets acquired and liabilities assumed was based upon the estimated fair values at the date of acquisition. The Company finalized the valuation for estimating the fair value of the assets acquired and liabilities assumed at September 30, 2015 with a small change from the preliminary December 31, 2014 estimate. There was approximately $0.4 million of transaction costs related to the acquisition that were included in selling, engineering and administration for 2014 in the Company’s Consolidated Statements of Operations.

The National Meter acquisition was accounted for under the purchase method, and accordingly, the results of operations were included in the Company’s financial statements from the date of acquisition. The acquisition did not have a material impact on the Company’s consolidated financial statements or the notes thereto.

Note 4 Short-term Debt and Credit Lines

Short-term debt at December 31, 2015 and 2014 consisted of:



	2015		2014
	(In thousands)
Notes payable to banks	$	5,860	$	5,977
Commercial paper	65,500		69,950
Total short-term debt	$	71,360	$	75,927

Included in notes payable to banks at December 31, 2015 was $4.4 million outstanding under a 4.0 million Euro-based revolving loan facility that does not expire, and which bore interest at 1.30%. Included in notes payable to banks at December 31, 2014 was $4.5 million outstanding under a 4.0 million Euro-based revolving loan facility that does not expire, and which bore interest at 1.51%.

In May 2014, the Company amended its May 2012 credit agreement with its primary lender to a three-year $105.0 million line of credit that supports commercial paper (up to $70.0 million) and includes $5.0 million of a Euro line of credit. Borrowings of commercial paper bore interest at 1.25% in 2015 and 2014. Under the principal line of credit, the Company had $38.0 million of unused credit lines available out of the total of $41.2 million short-term credit lines at December 31, 2015. While the facility is unsecured, there are a number of financial covenants with which the Company must comply, and the Company was in compliance as of December 31, 2015.

Note 5 Stock Compensation

As of December 31, 2015, the Company has an Omnibus Incentive Plan under which 700,000 shares are reserved for restricted stock and stock options grants for employees, as well as stock grants for directors. The plan was approved in 2011 and replaced all prior stock-based plans except for shares and options previously issued under those plans. As of December 31, 2015 and 2014, there were 409,000 shares and 456,000 shares of the Company’s Common Stock available for grant under the 2011 Omnibus Incentive Plan. The Company recognizes the cost of stock-based awards in net earnings for all of its stock-based compensation plans on a straight-line basis over the service period of the awards. The following sections describe the three types of grants in more detail.

Stock Options

The Company estimates the fair value of its option awards using the Black-Scholes option-pricing formula, and records compensation expense for stock options ratably over the stock option grant’s vesting period. Stock option compensation expense recognized by the Company for the year ended December 31, 2015 related to stock options was $0.5 million compared to $0.4 million in 2014 and $0.5 million in 2013.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

The following table summarizes the transactions of the Company’s stock option plans for the three-year period ended December 31, 2015:



	Number of shares		Weighted-average exercise price
Options outstanding - December 31, 2012	247,580		$	34.26
Options granted	23,258		$	51.29
Options exercised	(66,660	)	$	24.91
Options forfeited	(1,800	)	$	37.78
Options outstanding - December 31, 2013	202,378		$	39.27
Options granted	23,958		$	54.36
Options exercised	(23,016	)	$	32.57
Options forfeited	—		n/a
Options outstanding - December 31, 2014	203,320		$	41.80
Options granted	24,755		$	56.66
Options exercised	(43,269	)	$	37.96
Options forfeited	—		n/a
Options outstanding - December 31, 2015	184,806		$	44.69
Price range $24.94 — $36.59
(weighted-average contractual life of 5.8 years)	59,500		$	35.87
Price range $36.60 — $51.29
(weighted-average contractual life of 5.0 years)	62,434		$	42.83
Price range $51.30 — $56.66
(weighted-average contractual life of 3.5 years)	62,872		$	54.89
Options outstanding - December 31, 2015	184,806
Exercisable options —
December 31, 2013	113,060		$	38.18
December 31, 2014	111,016		$	39.68
December 31, 2015	105,470		$	40.96

The following assumptions were used for valuing options granted in the years ended December 31:



	2015		2014
Per share fair value of options granted during the period	$23.08		$22.35
Risk-free interest rate	1.74	%	1.73	%
Dividend yield	1.32	%	1.31	%
Volatility factor	49.5	%	49.9	%
Weighted-average expected life in years	5.3		5.3

The expected life is based on historical exercise behavior and the projected exercise of unexercised stock options. The risk-free interest rate is based on the U.S. Treasury yield curve in effect on the date of grant for the respective expected life of the option. The expected dividend yield is based on the expected annual dividends divided by the grant date market value of the Company’s Common Stock. The expected volatility is based on the historical volatility of the Company’s Common Stock.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

The following table summarizes the aggregate intrinsic value related to options exercised, outstanding and exercisable as of and for the years ended December 31:



	2015		2014
	(In thousands)
Exercised	$	1,058	$	493
Outstanding	$	2,569	$	3,568
Exercisable	$	1,859	$	2,184

As of December 31, 2015, the unrecognized compensation cost related to stock options was approximately $1.2 million, which will be recognized over a weighted average period of 2.5 years.

Director Stock Grant

Non-employee directors receive an annual award of $50,000 worth of shares of the Company’s Common Stock under the shareholder-approved 2011 Omnibus Incentive Plan. The Company values stock grants for directors on the closing price of the Company’s stock on the day the grant was awarded. The Company records compensation expense for this plan ratably over the annual service period beginning May 1. Director stock compensation expense recognized by the Company for the year ended December 31, 2015, 2014 and 2013 was $0.4 million in each year. As of December 31, 2015, the unrecognized compensation cost related to the director stock award that is expected to be recognized over the remaining four months is estimated to be approximately $0.1 million.

Restricted Stock

The Company periodically issues nonvested shares of the Company's Common Stock to certain eligible employees, generally with a three-year cliff vesting period contingent on employment. The Company values restricted stock on the closing price of the Company's stock on the day the grant was awarded. The Company records compensation expense for these plans ratably over the vesting periods. Nonvested stock compensation expense recognized by the Company for the year ended December 31, 2015 was $1.1 million compared to $1.0 million in 2014 and $0.9 million in 2013.

The fair value of nonvested shares is determined based on the market price of the shares on the grant date.



	Shares		Fair value per share
Nonvested at December 31, 2012	73,825		$	37.01
Granted	21,425		$	51.12
Vested	(16,875	)	$	38.41
Forfeited	(3,900	)	$	37.69
Nonvested at December 31, 2013	74,475		$	40.54
Granted	21,956		$	54.36
Vested	(24,350	)	$	36.59
Forfeited	(3,625	)	$	41.61
Nonvested at December 31, 2014	68,456		$	46.32
Granted	19,193		$	56.66
Vested	(26,075	)	$	36.15
Forfeited	(1,450	)	$	48.87
Nonvested at December 31, 2015	60,124		$	53.97

As of December 31, 2015, there was $1.2 million of unrecognized compensation cost related to nonvested restricted stock that is expected to be recognized over a weighted average period of 1.2 years.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Note 6 Commitments and Contingencies

Commitments

The Company makes commitments in the normal course of business. The Company leases equipment and facilities under non-cancelable operating leases, some of which contain renewal options. Total future minimum lease payments consisted of the following at December 31, 2015:



	Total leases
	(In thousands)
2016	$	1,888
2017	1,687
2018	1,438
2019	1,243
2020	1,243
Thereafter	4,862
Total lease obligations	$	12,361

Total rental expense charged to operations under all operating leases was $3.2 million, $3.1 million and $2.8 million in 2015, 2014 and 2013, respectively.

Contingencies

In the normal course of business, the Company is named in legal proceedings. There are currently no material legal proceedings pending with respect to the Company. The more significant legal proceedings are discussed below.

The Company is subject to contingencies related to environmental laws and regulations. The Company is named as one of many potentially responsible parties in two landfill lawsuits. The landfill sites are impacted by the Federal Comprehensive Environmental Response, Compensation and Liability Act and other environmental laws and regulations. At this time, the Company does not believe the ultimate resolution of these matters will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based on the Company’s assessment of its limited past involvement with these landfill sites as well as the substantial involvement of and government focus on other named third parties with these landfill sites. However, due to the inherent uncertainties of such proceedings, the Company cannot predict the ultimate outcome of any of these matters. A future change in circumstances with respect to these specific matters or with respect to sites formerly or currently owned or operated by the Company, off-site disposal locations used by the Company, and property owned by third parties that is near such sites, could result in future costs to the Company and such amounts could be material. Expenditures for compliance with environmental control provisions and regulations during 2015, 2014 and 2013 were not material.

Like other companies in recent years, the Company is named as a defendant in numerous pending multi-claimant/multi-defendant lawsuits alleging personal injury as a result of exposure to asbestos, manufactured by third parties, and in the past was integrated into or sold with a very limited number of the Company’s products. The Company is vigorously defending itself against these claims. Although it is not possible to predict the ultimate outcome of these matters, the Company does not believe the ultimate resolution of these issues will have a material adverse effect on the Company’s financial position or results of operations, either from a cash flow perspective or on the financial statements as a whole. This belief is based in part on the fact that no claimant has proven or substantially demonstrated asbestos exposure caused by products manufactured or sold by the Company and that a number of cases have been voluntarily dismissed.

The Company relies on single suppliers for most brass castings and certain electronic subassemblies in several of its product lines. The Company believes these items would be available from other sources, but that the loss of certain suppliers would result in a higher cost of materials, delivery delays, short-term increases in inventory and higher quality control costs in the short term. The Company attempts to mitigate these risks by working closely with key suppliers, purchasing minimal amounts from alternative suppliers and by purchasing business interruption insurance where appropriate.

The Company reevaluates its exposures on a periodic basis and makes adjustments to reserves as appropriate.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

Note 7 Employee Benefit Plans

The Company maintains a non-contributory defined benefit pension plan that covers substantially all U.S. employees who were employed at December 31, 2011. After that date, no further benefits are being accrued in this plan. For the frozen pension plan, benefits are based primarily on years of service and, for certain plans, levels of compensation.

The Company also maintains supplemental non-qualified plans for certain officers and other key employees, and an Employee Savings and Stock Option Plan (“ESSOP”) for the majority of the U.S. employees.

The Company also has a postretirement healthcare benefit plan that provides medical benefits for certain U.S. retirees and eligible dependents hired prior to November 1, 2004. Employees are eligible to receive postretirement healthcare benefits upon meeting certain age and service requirements. No employees hired after October 31, 2004 are eligible to receive these benefits. This plan requires employee contributions to offset benefit costs.

Amounts included in accumulated other comprehensive loss, net of tax, at December 31, 2015 that have not yet been recognized in net periodic benefit cost are as follows:



	Pension plans		Other postretirement benefits
	(In thousands)
Prior service cost	$	—	$	(39	)
Net actuarial loss	$	11,904	$	(185	)

Amounts included in accumulated other comprehensive loss, net of tax, at December 31, 2015 expected to be recognized in net periodic benefit cost during the fiscal year ending December 31, 2016 are as follows:



	Pension plans		Other postretirement benefits
	(In thousands)
Prior service credit	$	—	$	(16	)
Net actuarial loss	$	397	$	—

Qualified Pension Plan

The Company maintains a non-contributory defined benefit pension plan (sometimes referred to as the “qualified pension plan”) for certain employees. On December 31, 2010, the Company froze the qualified pension plan for its non-union participants and formed a new defined contribution feature within the ESSOP plan in which each employee received a similar benefit. On December 31, 2011, the Company froze the qualified pension plan for its union participants and included them in the same defined contribution feature within the ESSOP. After December 31, 2011, employees receive no future benefits under the qualified pension benefit plan as benefits were frozen and the employees now receive a defined contribution in its place. Employees will continue to earn returns on their frozen balances.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

The following table sets forth the components of net periodic pension cost for the years ended December 31, 2015, 2014 and 2013 based on a December 31 measurement date:



	2015			2014			2013
	(In thousands)
Service cost — benefits earned during the year	$	4		$	4		$	5
Interest cost on projected benefit obligations	1,769			1,888			1,842
Expected return on plan assets	(2,151		)	(2,806		)	(2,744		)
Amortization of net loss	656			606			719
Settlement expense	762			858			806
Net periodic pension cost	$	1,040		$	550		$	628

Actuarial assumptions used in the determination of the net periodic pension cost are:



	2015		2014		2013
Discount rate	3.81	%	4.47	%	3.68	%
Expected long-term return on plan assets	5.00	%	6.50	%	6.50	%
Rate of compensation increase	n/a		n/a		n/a

The Company's discount rate assumptions for the qualified pension plan are based on the average yield of a hypothetical high quality bond portfolio with maturities that approximately match the estimated cash flow needs of the plan. The assumptions for expected long-term rates of return on assets are based on historical experience and estimated future investment returns, taking into consideration anticipated asset allocations, investment strategies and the views of various investment professionals. The use of these assumptions can cause volatility if actual results differ from expected results.

The following table provides a reconciliation of benefit obligations, plan assets and funded status based on a December 31 measurement date:



	2015			2014
	(In thousands)
Change in benefit obligation:
Benefit obligation at beginning of plan year	$	48,200		$	45,561
Service cost	4			4
Interest cost	1,769			1,888
Actuarial (gain)/loss	(906		)	4,989
Benefits paid	(3,596		)	(4,242		)
Projected benefit obligation at measurement date	$	45,471		$	48,200

Change in plan assets:
Fair value of plan assets at beginning of plan year	$	48,656		$	49,873
Actual return on plan assets	(1,457		)	3,025
Benefits paid	(3,596		)	(4,242		)
Fair value of plan assets at measurement date	$	43,603		$	48,656

Funded status of the plan:
Benefit plan assets in excess of benefit obligation	—			456
Benefit obligation in excess of plan assets	(1,868		)	—
Accrued pension liability (prepaid pension asset)	$	(1,868	)	$	456

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013

The actuarial assumption used in the determination of the benefit obligation of the above data is:



	2015		2014
Discount rate	4.14	%	3.81	%

The fair value of the qualified pension plan assets was $43.6 million at December 31, 2015 and $48.7 million at December 31, 2014. The variation in the fair value of the assets between years was due to the change in the market value of the underlying investments and benefits paid. Estimated future benefit payments expected to be paid in each of the next five years beginning with 2016 are $4.6 million, $4.3 million, $3.9 million, $3.6 million and $3.9 million, with an aggregate of $14.2 million for the five years thereafter. As of the most recent actuarial measurement date, the Company is not required to make a minimum contribution for the 2016 calendar year.

Historically, the Company employed a total return investment approach whereby a mix of equities and fixed income investments were used to maximize the long-term return of plan assets for a prudent level of risk. Because of volatility in market returns and the plan’s current funding status, the decision was made in 2014 to move towards a liability driven investing strategy whereby the assets are primarily fixed income investments. The fixed income investments chosen under this strategy, while not precisely the same, are meant to parallel the investments selected in determining the discount rate used to calculate the Company’s pension liability. The purpose of this strategy is to minimize equity exposure and interest risk and thereby maintain the funding status of the plan, regardless of movement in interest rates. In 2014, the Company adjusted the investment portfolio to reduce its equity allocation and introduced higher fixed-income investments that matched the duration of the estimated pension liability. The remaining equity investments are diversified across various stocks, as well as growth, value, and small and large capitalizations. Investment risk is measured and monitored on an ongoing basis through quarterly investment portfolio reviews, annual liability measurements and periodic asset/liability studies.

As a result of the change in investing strategy in 2014, changes were made to the investment policy for the plan. The target allocations for plan assets are 0%-18% for public equities, 0%-14% for bank loans, and 68%-100% for traditional and cash balance liability-hedging assets.

Accounting Standards Codification 820, “Fair Value Measurements and Disclosures,” establishes a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. This hierarchy consists of three broad levels: Level 1 inputs consist of unadjusted quoted prices in active markets for identical assets and have the highest priority. Level 2 inputs consist of inputs other than quoted prices included in Level 1 that are observable for the asset or liability, either directly or indirectly. Level 3 inputs are unobservable inputs for determining the fair value of assets or liabilities that reflect assumptions that market participants would use in pricing assets or liabilities. The plan uses appropriate valuation techniques based on the available inputs to measure the fair value of its investments.

The fair value of the Company's qualified pension plan assets by category at December 31, 2015 are as follows:



	Market value		Quoted prices in active markets for identical assets (Level 1)		Significant observable inputs (Level 2)		Significant unobservable inputs (Level 3)
	(In thousands)
Equity securities (a)	$	5,614	$	—	$	5,614	$	—
Fixed income funds (b)	36,954		—		36,954		—
Cash/cash equivalents (c)	1,035		1,035		—		—
Total	$	43,603	$	1,035	$	42,568	$	—


(a)	The Equity funds in aggregate are well diversified by market capitalization, investment style and geography. The funds seek to provide investment results approximating the aggregate price and dividend performance of securities included in the S&P 500 Index, Russell 2000 Index and MSCI All Country World ex-US Index.


(b)	The Fixed Income funds consist of bonds. In aggregate, the funds seek to provide investment return approximating the return of the Plan’s obligations. The funds consist of Long Credit bonds, Intermediate Credit bonds, Short Duration Government Credit bonds and Bank Loans.

BADGER METER, INC.

Notes to Consolidated Financial Statements (continued)

December 31, 2015, 2014 and 2013


(c)	This category comprises the cash held to pay beneficiaries. The fair value of cash equals its book value.

The fair value of the Company’s qualified pension plan assets by category at December 31, 2014 are as follows:



	Market value		Quoted prices in active markets for identical assets (Level 1)		Significant observable inputs (Level 2)		Significant unobservable inputs (Level 3)
	(In thousands)
Equity securities (a)	$	6,356	$	—	$	6,356	$	—
Fixed income funds (b)	41,351		—		41,351		—
Cash/cash equivalents (c)	949		949		—		—
Total	$	48,656	$	949	$	47,707	$	—


(a)	The Equity funds in aggregate are well diversified by market capitalization, investment style and geography. The funds seek to provide investment results approximating the aggregate price and dividend performance of securities included in the S&P 500 Index, Russell 2000 Index and MSCI All Country World ex-US Index.


(b)	The Fixed Income funds consist of bonds. In aggregate, the funds seek to provide investment return approximating the return of the Plan’s obligations. The funds consist of Long Credit bonds, Intermediate Credit bonds, Short Duration Government Credit bonds and Bank Loans.


(c)	This category comprises the cash held to pay beneficiaries. The fair value of cash equals its book value.

The pension plan has a separately determined accumulated benefit obligation that is the actuarial present value of benefits based upon service rendered and current and past compensation levels. Prior to December 31, 2012, this differed from the projected benefit obligation in that it included no assumption about future compensation levels. The accumulated benefit obligation was $45.5 million at December 31, 2015 and $48.2 million at December 31, 2014.

Supplemental Non-qualified Unfunded Plans

The Company also maintains supplemental non-qualified unfunded plans for certain officers and other key employees. Expense for these plans was $0.2 million for the year ended 2015, $0.3 million for the year ended 2014, and $0.2 million for the year ended 2013. The amount accrued was $1.6 million and $1.6 million as of December 31, 2015 and 2014, respectively. Amounts were determined based on similar assumptions as the qualified pension plan as of the December 31 measurement date for 2015 and 2014.



	2015			2014
	(In thousands)
Benefit obligation at beginning of year	$	6,767		$	6,376
Service cost	147			130
Interest cost	251			269
Actuarial (gain) loss	(812		)	462
Plan participants' contributions	628			708
Benefits paid	(881		)	(1,178		)
Benefit obligation and funded status at end of year	$	6,100		$	6,767



	2015			2014			2013
	(In thousands)
Provision at statutory rate	$	14,403		$	15,720		$	13,303
State income taxes, net of federal tax benefit	1,242			841			1,408
Foreign - tax rate differential and other	(13		)	(454		)	(393		)
Domestic production activities deduction	(521		)	(675		)	(498		)
Other	103			(198		)	(428		)
Actual provision	$	15,214		$	15,234		$	13,392



	2015		2014
	(In thousands)
Deferred tax assets:
Reserve for receivables and inventories	$	2,979	$	2,769
Accrued compensation	1,180		1,105
Payables	1,237		694
Non-pension postretirement benefits	2,337		2,601
Net operating loss and credit carryforwards	1,193		1,668
Accrued pension benefits	1,398		1,122
Accrued employee benefits	3,969		2,405
Other	856		858
Total deferred tax assets	15,149		13,222

Deferred tax liabilities:
Depreciation	4,652		4,570
Amortization	9,850		10,881
Total deferred tax liabilities	14,502		15,451
Net deferred tax assets (liabilities)	$	647	$	(2,229	)



	2015			2014
	(In thousands)
Balance at beginning of year	$	846		$	880
Increases in unrecognized tax benefits as a result of positions taken during the prior period	22			11
Increases in unrecognized tax benefits as a result of positions taken during the current period	166			185
Decreases in unrecognized tax benefits relating to settlements with taxing authorities	(347		)	—
Reductions to unrecognized tax benefits as a result of a lapse of the applicable statute of limitations	(154		)	(230		)
Balance at end of year	$	533		$	846



	2015		2014		2013
	(In thousands)
Revenues:
United States	$	322,535	$	309,651	$	290,019
Foreign:
Asia	8,299		10,647		8,085
Canada	9,095		12,092		8,514
Europe	17,036		19,448		15,677
Mexico	8,889		3,941		4,226
Middle East	9,672		6,221		1,604
Other	2,172		2,768		5,997
Total	$	377,698	$	364,768	$	334,122

Attached files

Stock widget

Investing forum

BADGER METER INC Reports



	Quarter ended
	March 31		June 30		September 30		December 31
	(In thousands except per share data)
2015
Net sales	$	83,644	$	98,896	$	99,388	$	95,770
Gross margin	$	30,075	$	35,143	$	36,101	$	34,457
Net earnings	$	4,227	$	7,901	$	8,327	$	5,483
Earnings per share:
Basic	$	0.29	$	0.55	$	0.58	$	0.38
Diluted	$	0.29	$	0.55	$	0.58	$	0.38
Dividends declared	$	0.19	$	0.19	$	0.20	$	0.20
Stock price:
High	$	61.35	$	65.87	$	64.41	$	62.00
Low	$	54.72	$	58.67	$	51.63	$	55.28
Quarter-end close	$	59.94	$	63.49	$	58.06	$	58.59

2014
Net sales	$	83,496	$	95,662	$	96,271	$	89,339
Gross margin	$	28,951	$	34,831	$	36,465	$	30,895
Net earnings	$	4,632	$	8,814	$	10,231	$	6,001
Earnings per share:
Basic	$	0.33	$	0.62	$	0.71	$	0.42
Diluted	$	0.32	$	0.61	$	0.71	$	0.42
Dividends declared	$	0.18	$	0.18	$	0.19	$	0.19
Stock price:
High	$	56.03	$	56.96	$	54.33	$	60.91
Low	$	47.90	$	46.47	$	47.32	$	47.46
Quarter-end close	$	55.10	$	52.65	$	50.45	$	59.35


2.	Financial Statement Schedules. Financial statement schedules are omitted because the information required in these schedules is included in the Notes to Consolidated Financial Statements.


3.	Exhibits. See the Exhibit Index included in this 2015 Annual Report on Form 10-K that is incorporated herein by reference.



BADGER METER, INC.

By:		/s/ Richard A. Meeusen
		Richard A. Meeusen
		Chairman, President and Chief Executive Officer



Name		Title

/s/ Richard A. Meeusen		Chairman, President and Chief Executive Officer and Director (Principal executive officer)
Richard A. Meeusen

/s/ Richard E. Johnson		Senior Vice President — Finance, Chief Financial Officer and Treasurer (Principal financial officer)
Richard E. Johnson

/s/ Beverly L. P. Smiley		Vice President — Controller (Principal accounting officer)
Beverly L. P. Smiley		Vice President — Controller (Principal accounting officer)

/s/ Ronald H. Dix		Director
Ronald H. Dix		Director

/s/ Thomas J. Fischer		Director
Thomas J. Fischer		Director

/s/ Gale E. Klappa		Director
Gale E. Klappa		Director

/s/ Gail A. Lione		Director
Gail A. Lione		Director

/s/ Andrew J. Policano		Director
Andrew J. Policano		Director

/s/ Steven J. Smith		Director
Steven J. Smith		Director

/s/ Todd J. Teske		Director
Todd J. Teske		Director



EXHIBIT NO.		EXHIBIT DESCRIPTION

(3)		Restated Articles of Incorporation (as in effect as of August 8, 2008).

		[Incorporated by reference to Exhibit (3.2) to Badger Meter, Inc.’s Quarterly Report on Form 10-Q for the period ended September 30, 2008 (Commission File No. 001-06706)].

(3.1)		Restated By-Laws (as amended and restated as of October 30, 2015).

		[Incorporated by reference to Exhibit (3.1) to Badger Meter, Inc.’s Current Report on Form 8-K, dated October 30, 2015 (Commission File No. 001-06706)].

(4)		Rights Agreement, dated February 15, 2008, between Badger Meter, Inc. and American Stock Transfer & Trust Company.

		[Incorporated by reference to Exhibit (4.1) to Badger Meter, Inc.’s Current Report on Form 8-K, dated February 22, 2008 (Commission File No. 001-06706)].

(4.1)		Loan Agreement dated May 23, 2012 between Badger Meter, Inc. and BMO Harris Bank relating to Badger Meter, Inc.'s revolving credit agreement.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.'s Quarterly Report on Form 10-Q for the period ended June 30, 2012 (Commission File No. 001-06706)].

(4.2)		First Amendment to Credit Agreement dated May 21, 2013, related to the Loan Agreement dated May 23, 2012 between Badger Meter, Inc. and BMO Harris Bank NA for Badger Meter, Inc.'s credit agreement.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.'s Quarterly Report on Form 10-Q for the period ended June 30, 2013 (Commission File No. 001-06706)].

(4.3)		Second Amendment to Credit Agreement dated May 21, 2014, related to the Loan Agreement dated May 23, 2012 between Badger Meter, Inc. and BMO Harris Bank NA for Badger Meter, Inc.'s credit agreement.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.'s Quarterly Report on Form 10-Q for the period ended June 30, 2014 (Commission File No. 001-06706)].

(10.0)*		Badger Meter, Inc. Employee Savings and Stock Ownership Plan.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.’s Form S-8 Registration Statement (Registration No. 33-62241)].

(10.2)*		Badger Meter, Inc. 1999 Stock Option Plan.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.’s Form S-8 Registration Statement (Registration No. 333-73228)].

(10.3)*		Badger Meter, Inc. 2003 Stock Option Plan.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.’s Form S-8 Registration Statement (Registration No. 333-107850)].

(10.4)*		Form of the Key Executive Employment and Severance Agreements between Badger Meter, Inc. and the applicable executive officers.

		[Incorporated by reference from Exhibit (10.12) to Badger Meter, Inc.’s Annual Report on Form 10-K for the period ended December 31, 2008 (Commission File No. 001-06706)].



EXHIBIT NO.		EXHIBIT DESCRIPTION

(10.5)*		Amended and Restated Badger Meter, Inc. Executive Supplemental Plan.

		[Incorporated by reference from Exhibit (10.13) to Badger Meter, Inc.’s Annual Report on Form 10-K for the period ended December 31, 2008 (Commission File No. 001-06706)].

(10.6)*		Amended and Restated Badger Meter, Inc. Deferred Compensation Plan.

		[Incorporated by reference from Exhibit (10.14) to Badger Meter, Inc.’s Annual Report on Form 10-K for the period ended December 31, 2008 (Commission File No. 001-06706)].

(10.7)*		Amended and Restated Deferred Compensation Plan for Certain Directors.

		[Incorporated by reference from Exhibit (10.15) to Badger Meter, Inc.’s Annual Report on Form 10-K for the period ended December 31, 2008 (Commission File No. 001-06706)].

(10.8)*		Amended and Restated Executive Supplemental Plan II.

		[Incorporated by reference from Exhibit (10.16) to Badger Meter, Inc.’s Annual Report on Form 10-K for the period ended December 31, 2008 (Commission File No. 001-06706)].

(10.9)*		Badger Meter, Inc. 2011 Omnibus Incentive Plan.

		[Incorporated by reference from Exhibit (4.1) to Badger Meter, Inc.’s Form S-8 Registration Statement (Registration No. 333-173966)].

(10.10)*		Form of Nonqualified Stock Option Agreement under Badger Meter, Inc. 2011 Omnibus Incentive Plan.

		[Incorporated by reference from Badger Meter, Inc.’s Form 8-K dated April 29, 2011 (Commission No. 001-06760)].

(10.11)*		Form of Restricted Stock Award Agreement under Badger Meter, Inc. 2011 Omnibus Incentive Plan.

		[Incorporated by reference from Badger Meter, Inc.’s Form 8-K dated April 29, 2011 (Commission No. 001-06760)].

(21)		Subsidiaries of the Registrant.

(23)		Consent of Ernst & Young LLP.

(31.1)		Certification by the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

(31.2)		Certification by the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.

(32)		Certification of Periodic Financial Report by the Chief Executive Officer and Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.

(99)		Definitive Proxy Statement for the Annual Meeting of Shareholders to be held April 29, 2016. To be filed with the Securities and Exchange Commission under Regulation 14A within 120 days after the end of the Registrant’s fiscal year. With the exception of the information incorporated by reference into Items 10, 11, 12, 13 and 14 of this Annual Report on Form 10-K, the definitive Proxy Statement is not deemed filed as part of this report.

(101)		The following materials from the Company's Annual Report on Form 10-K for the year ended December 31, 2015 formatted in Extensible Business Reporting Language (XBRL): (i) the Consolidated Balance Sheets, (ii) the Consolidated Statements of Operations, (iii) the Consolidated Statements of Comprehensive Income, (iv) the Consolidated Statements of Cash Flows, (v) the Consolidated Statements of Shareholders' Equity, (vi) Notes to Consolidated Financial Statements, tagged as blocks of text and (vii) document and entity information.