Table of Contents

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C.  20549

FORM 10-K

(Mark One)

x         ANNUAL REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended March 31, 2015

OR

o           TRANSITION REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                 to                 

Commission File No.:  001-11789

ENCISION INC.

 (Exact name of registrant as specified in its charter)

Registrant’s telephone number, including area code:  (303) 444-2600

Securities registered under Section 12(b) of the Act:  Common Stock, no par value

Securities registered under Section 12(g) of the Act:  None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes  o  No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Exchange Act.  Yes  o  No  x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  x  No  o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes  x  No  o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  o

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

Large accelerated filer  o      Accelerated filer  o         Non-accelerated filer  o    Smaller reporting company  x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).  Yes  o  No  x

As of September 30, 2014, the aggregate market value of the shares of common stock held by non-affiliates of the issuer on such date was $4,323,233. This figure is based on the average bid and asked price of $0.93 per share of the issuer’s common stock on September 30, 2014 as quoted on the OTCQB Marketplace.

The number of shares outstanding of each of the issuer’s classes of common equity, as of the last practicable date.

Documents Incorporated by Reference: Definitive Proxy Statement for the 2015 Annual Shareholders’ Meeting to be filed with the Securities and Exchange Commission and incorporated by reference as described in Part III. The 2015 Proxy Statement will be filed within 120 days after the end of the fiscal year ended March 31, 2015.

Table of Contents

Table of Contents

1

Table of Contents

Forward-Looking Statements

Statements contained in this Annual Report on Form 10-K include forward looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 and involve substantial risks and uncertainties that may cause actual results to differ materially from those indicated by the forward looking statements. All forward looking statements in this Annual Report on Form 10-K, including statements about our strategies, expectations about new and existing products, market demand, acceptance of new and existing products, technologies and opportunities, market size and growth, and return on investments in products and market, are based on information available to us on the date of this document, and we assume no obligation to update such forward looking statements. In some cases, you can identify forward looking statements by terminology such as “may”, “will”, “should”, “could”, “expects”, “plans”, “intends”, “anticipates”, “believes”, “estimates”, “predicts”, “potential”, or “continue” or the negative of such terms or other comparable terminology. Readers of this Annual Report on Form 10-K are strongly encouraged to review the section entitled “Risk Factors”.

PART I

Item 1.  Business

Company Overview

Encision Inc. (“Encision”, “we”, “us”, “our” or the “Company”), a medical device company based in Boulder, Colorado, has developed and markets innovative technology that provides unprecedented outcomes and patient safety in minimally-invasive surgery. We believe that our patented Active Electrode Monitoring® (“AEM”) Surgical Instruments are changing the marketplace for electrosurgical devices and laparoscopic instruments by providing a solution to a well-documented hazard unique to laparoscopic surgery.

We address market opportunities created by the increase in minimally-invasive surgery (“MIS”) and surgeons’ use of electrosurgery devices in these procedures. The product opportunity exists in that monopolar electrosurgery instruments used in laparoscopic procedures provide excellent clinical results, but are also susceptible to causing inadvertent collateral tissue damage outside the surgeon’s field of view. The risk of unintended electrosurgical burn injury to the patient in laparoscopic surgery has been well documented. This risk poses a threat to patient safety, including the risk of death, and creates liability exposure for surgeons and hospitals, and increased and preventable readmissions. Our technology helps to reduce hospital risk and liability.

Our patented AEM technology provides surgeons with the desired tissue effects of cutting and coagulating tissue in laparoscopic procedures, while preventing stray electrosurgical energy that can cause complications and even death. AEM Surgical Instruments are equivalent to conventional instruments in size, shape, ergonomics and functionality, but they incorporate “Active Electrode Monitoring” technology to dynamically and continuously monitor the flow of electrosurgical current, thereby helping to prevent patient injury. With our “shielded and monitored” instruments, surgeons are able to perform electrosurgical procedures more safely, effectively and economically than is possible using conventional instruments.

AEM technology has been recommended and endorsed by sources from many groups involved in MIS. Surgeons, nurses, biomedical engineers, the medicolegal community, malpractice insurance carriers and electrosurgical device manufacturers advocate the use of AEM technology.

Business Highlights

Proprietary, Patented Technology

We have developed and launched patented AEM Surgical Instruments that enhance patient safety and patient outcomes in laparoscopic surgical procedures. We have been issued 11 unexpired patents relating to AEM technology from the United States Patent and Trademark Office, each encompassing multiple claims, and which have between one and eighteen years seven months remaining. We also have patents relating to AEM technology issued in Europe, Japan, Canada and Australia.

Technology Solves a Well-Documented Risk in Minimally Invasive Surgery

MIS offers significant benefits for patients by reducing trauma, hospital stays, recovery times and medical costs.  However, these benefits have not been achieved without the emergence of new risks. The risk of unintended tissue damage from stray electrosurgical energy has been well documented. Such injuries can be especially troubling given that often these injuries are out of the field of view,  they can go unrecognized, and can lead to a cascade of adverse events, including death. Our patented AEM technology eliminates the risk of stray electrosurgical burns in MIS while providing surgeons with the tissue effects they desire.

Product Line has been Developed and Launched

Our AEM Surgical Instruments have been engineered to provide a seamless transition for surgeons switching from conventional laparoscopic instruments. AEM technology has been integrated into instruments that have the same look, feel and functionality as conventional instruments that surgeons have been using for years. The AEM product line encompasses the full range of instrument sizes, types and styles favored by surgeons. Additionally we continued to improve quality and added our AEM EndoShield™ Burn Protection System (“EndoShield”), during our fiscal year ended March 31, 2015. Thus, hospitals can make a complete and smooth conversion to our product line, thereby advancing patient safety in MIS.

Emerging as a Standard of Care

We believe that AEM technology is following a similar path as previous technological developments in surgery. Throughout the history of electrosurgery, companies that have developed significant technological breakthroughs in patient safety have seen their technologies become widely used. As with “Isolated” electrosurgical generators in the 1970s and with “REM” technology in the 1980s, AEM technology is receiving the

2

Table of Contents

broad endorsements that drove these previous new technologies to becoming a standard of care. We believe that it is possible to follow a course similar to that of pulse oximetry in becoming a standard of care. Our proprietary AEM technology enhances patient safety in MIS, especially in light of laparoscopic instruments being in closer proximity with single-port and reduced-port approaches. As a result, knowledgeable clinicians are now advocating AEM technology’s use.

Developing Distribution Network is Advancing Utilization of AEM Technology

Our AEM technology, in the hands of a sales network with broad access to the surgery marketplace, will help to increase utilization and market share. Historically, our sales and marketing efforts have been hindered by our small size and limited distribution channels. While these limitations continue, we have improved our sales network, which provided new hospital accounts with AEM technology in our fiscal year ended March 31, 2015. Our supplier agreements with Group Purchasing Organizations (“GPOs”) and other key hospitals systems, such as Ascension, are beginning to expose more hospitals to the benefits of our AEM technology.

Market Overview

We believe that our patented AEM technology provides us with marketing leverage toward gaining an increased share, both in terms of penetrations, as well as increasing our impact per procedure with AEM instrumentation.

In the 1990s, surgeons began widespread use of minimally-invasive surgical techniques. The benefits of MIS are substantial and include reduced trauma for the patient, reduced hospital stay, shorter recovery time and lower medical costs. With improvements in the surgical micro-camera and in the variety of available instruments, laparoscopic surgery became popular among general surgeons, gynecologic surgeons and other specialties. Laparoscopy now accounts for a large percentage of all surgical procedures performed in the United States. Approximately 75% of surgeons employ monopolar electrosurgery for laparoscopy according to INTERactive SURVeys. There are over 4.4 million laparoscopic procedures performed annually in the United States, and this number is increasing annually. (Note: except as otherwise stated, market estimates in this section are as reported by Patient Safety & Quality Healthcare).

A component of the endoscopic surgery products market includes laparoscopic hand instruments, including scissors, graspers, dissectors, forceps, suction/irrigation devices, clip appliers and other surgical instruments of various designs, which provide a variety of tissue effects. Among the laparoscopic hand instruments, approximately $500 million in sales annually are instruments designed for “monopolar” electrosurgical utility. This market for laparoscopic monopolar electrosurgical instruments is the market we are targeting with our innovative AEM Surgical Instruments. Our proprietary AEM product line supplants the conventional “non-shielded, non-monitored” electrosurgical instruments commonly used in laparoscopic surgery.

When a hospital decides to use our AEM technology, we make recurring sales to such hospital for replacement instruments. Sales from replacement reusable and disposable AEM products in hospitals represented over 90% of our sales in the fiscal year ended March 31, 2015, and we expect this sales stream to grow as new hospitals increasingly adopt AEM technology and existing hospitals increase usage of AEM instrumentation. We also expect to increase the value per procedure delivered to our customers and, therefore, expect the dollars per procedure to increase. AEM Instruments are competitively priced compared to conventional laparoscopic instruments.

We aim to further develop the market by continuing to educate healthcare professionals about the benefits of AEM technology to advance patient safety. We are working to improve our sales network to reach the decision makers who purchase laparoscopic instruments and electrosurgical devices. We are also pursuing relationships with selected GPOs, hospital systems and integrated delivery networks to assist in promoting the benefits of AEM technology. We are seeking international opportunities for AEM technology sales. We estimate that sales outside the U.S. to be at least as large as that of the U.S. market. We are growing our presence in Australia and New Zealand and are seeking a new presence in the Middle East and Europe. As decisions are made at a system level, our intent is to highlight the clinical, economic and safety benefits of using AEM technology.

The Technology

Stray Electrosurgical Burn Injury to the Patient

Electrosurgical technology is a valuable and prevalent resource for surgeons. Since its introduction in the 1930s, electrosurgical technology has continually evolved and is estimated to be used by over 75% of all general surgeons.

The primary form of electrosurgery, monopolar electrosurgery, is a standard tool for general surgeons throughout the world. In monopolar electrosurgery, the surgeon uses an instrument (typically scissors, grasper/dissectors, spatula blades or suction-irrigation electrodes) to deliver electrical current to patient tissue. This “active electrode” provides the surgeon with the ability to cut, coagulate or ablate tissue as needed during the surgery. With the advent of MIS procedures, surgeons have continued using monopolar electrosurgery as a primary tool for hemostatic incision, coagulation of bleeding tissues, excision and ablation. Unfortunately, conventional laparoscopic electrosurgical instruments from competing manufacturers are susceptible to emitting stray electrical currents during the procedure. This risk is exacerbated by the fact that the micro-camera system used in laparoscopy limits the surgical field-of-view. Ninety percent of the instrument may be outside the surgeon’s field-of-view at any given time during the surgery.

Because stray electrical current can occur at any point along the shaft of the instrument, the potential for burns occurring to tissue outside the surgeon’s field-of-view is of great concern. Such burns to non-targeted tissue are dangerous as they are likely to go unnoticed and may lead to complications, such as perforation and infection in adjacent tissues or organs, and this can cause numerous adverse consequences. In many cases, the surgeon cannot detect stray electrosurgical burns at the time of the procedure. The resulting complication usually presents itself days later in the form of a severe infection or sepsis, which often results in a hospital readmission and a difficult course of correction and recovery for the patient. This situation has even resulted in fatalities.

3

Table of Contents

Stray electrosurgical burn injury can result from two causes — instrument insulation failure and capacitive coupling.  Instrument insulation failure can be a common occurrence with laparoscopic instruments. Conventional active electrodes for laparoscopic surgery are designed with the same basic construction — a single conductive element and an outer insulation coating. Unfortunately, this insulation can fail during the natural course of normal use during surgery. One university study found insulation defects in new disposable instruments before they were used or after limited surgical use. It is also possible for instrument insulation to become flawed during the handling, cleaning and sterilization process. This common insulation failure can allow electrical currents to “spark” from the instrument to unintended and unseen tissue with potentially serious consequences for the patient, such as bowel perforations. Four different studies indicate that the insulation failure rate in reusable instruments can be as high as one in five. Capacitive coupling is another way stray electrosurgical energy can cause unintended burns during laparoscopy. Capacitive coupling is an electrical phenomenon that occurs when current is induced from the instrument to nearby tissue or another instrument despite intact insulation. This potential for capacitive coupling is present in all laparoscopic surgeries that utilize monopolar electrosurgery devices and can likely occur outside the surgeon’s field-of-view.

Conventional, “non-shielded, non-monitored” laparoscopic instruments are susceptible to causing unintended, unseen burn injuries to the patient in MIS. Instrument insulation failure and capacitive coupling are the primary causes of stray electrosurgical burns in laparoscopy and are the two events over which the surgical team has traditionally had little, if any, control.  Although alternative forms to monopolar electrosurgery energy exist, these alternative energies tend to be less effective, take longer to achieve the desired surgical effect and are more costly.

Encision’s AEM Surgical Instruments

Active electrode monitoring technology eliminates the risk of stray electrical energy caused by instrument insulation failure and capacitive coupling, and thus prevents unintended burn injury to the patient. Capacitive coupling is the ability of an instrument to store an electrical charge, which may then be linked to another instrument.

AEM Surgical Instruments are an innovative solution to stray electrosurgical burns in laparoscopic surgery and are designed with the same look, feel and functionality as conventional instruments. They direct electrosurgical energy where the surgeon desires, while continuously monitoring the current flow to prevent stray electrosurgical energy from instrument insulation failure or capacitive coupling.

Whereas conventional instruments are simply a conductive element with a layer of insulation coating, AEM Surgical Instruments have a patented, multi-layered design with a built-in “shield,” a concept much like the third-wire ground in standard electrical cords. The shield in these instruments is referenced back to a monitor at the electrosurgical generator. In the event of a harmful level of stray electrical energy, the monitor shuts down the power at the source, assuring patient safety. For instance, if instrument insulation failure should occur, the AEM system, while continually monitoring the instrument, immediately shuts down the electrosurgical generator, turning off the electrical current and alerting the surgical staff.  The AEM system protects against capacitive coupling by providing a neutral return path for “capacitive” electrical energy. Capacitive energy is continually drained away from the instrument and away from the patient through the protective shield built into all AEM instruments.

The AEM system consists of shielded 5mm AEM Instruments and an AEM monitor. The AEM Instruments are designed to function identically to the conventional 5mm instruments that surgeons are familiar with, but with the added benefit of enhanced patient safety. Our entire line of laparoscopic instruments has the integrated AEM design and includes the full range of instruments that are common in laparoscopic surgery today. The AEM monitor is compatible with most electrosurgical generators. AEM Surgical Instruments provide enhanced patient safety, require no change in surgeon technique and are cost competitive. Thus, conversion to AEM Surgical Instruments is easy and economical.

Historical Perspective

We were organized as a Colorado corporation in 1991 and spent several years developing the AEM monitoring system and protective sheaths to adapt to conventional electrosurgical instruments. During this period, we conducted product trials and applied for patents with the United States Patent and Trademark Office and with International patent agencies. Our patents relate to the basic shielding and monitoring technologies that we incorporate into our AEM products. As of March 31, 2015, we have 11 unexpired United States patents relating to specific implementations of shielding and monitoring in instruments.

As we evolved, it was clear to us that our “active electrode monitoring” technology needed to be integrated into the standard laparoscopic instrument design. As the development program proceeded, it also became apparent that the merging of electrical and mechanical engineering skills in the instrument development process for our patented, integrated electrosurgical instruments was a complex and difficult task. As a result, instruments with integrated AEM technology were not completed for several years. Prior to offering a full range of laparoscopic electrosurgical instrumentation, it was difficult for hospitals to commit to the AEM solution, as we did not have adequate comparable surgical instrument options to match surgeon demand.

With the broad array of AEM instruments now available, the surgeon has a wide choice of instrument options and does not have to change surgical technique to use our AEM products. Since conversion to AEM technology is transparent to the surgeon, hospitals can now universally convert to AEM technology, thus providing all of their laparoscopic surgery patients a higher level of safety. This development coincides with the continued expansion of independent endorsements for AEM technology. Recommendations from the malpractice insurance and medicolegal communities complement the broad clinical endorsements that AEM technology has garnered over the past few years, leading to better awareness for the benefits of the technology.

Products

We produce and market a full line of AEM Instruments, which are “shielded and monitored” to prevent stray electrosurgical burns from insulation failure and capacitive coupling. Our product line includes a broad range of articulating instruments (scissors, graspers and dissectors), fixed-tip electrodes and suction-irrigation electrodes. These AEM Instruments are available in a wide array of reusable and disposable options. Also, we have a line of handles that are used for advanced laparoscopic procedures that incorporate stiffer shafts and ergonomic features. In addition, we market an AEM monitor product line that is used in conjunction with AEM Instruments. During our fiscal year ended March 31, 2015,

4

Table of Contents

we introduced our EndoShield. The EndoShield integrates our patented AEM technology into a disposable smart cord and eliminates the need for a separate AEM monitor. It is changing the marketplace for electrosurgical devices and laparoscopic instruments by providing a solution to a well-documented hazard unique to laparascopic surgery.

Sales and Marketing Overview

We believe that AEM technology can become the standard of care in laparoscopic surgery worldwide. Our marketing efforts are focused toward capitalizing on substantial independent endorsements for AEM technology. These third-party endorsements advocate utilizing active electrode monitoring for advancing patient safety in laparoscopic surgery. Substantial visibility has been achieved as a result of the technology’s recognition as an AORN Recommended Practice.

In addition, there is increasing public interest in the reduction of medical errors and the advancement of patient safety. For example the National Quality Forum and CMS (Centers for Medicare and Medicaid Services) recognize “patient death or serious disability associated with a burn incurred from any source while being cared for in a healthcare facility” as a “never-event”. We believe that the credibility and importance of our technology is complemented by this expanding public interest in advancing patient safety in new CMS Hospital Quality Metrics. The Center for Medicare and Medicaid Services published its Hospital-Acquired Condition Reduction Program, effective October 1, 2014. At that time, the program began to levy as much as a 1% penalty on Medicare reimbursements on hospitals in the lower quadrant of performance for selected quality indicators, including accidental puncture and laceration (“APL”). An example of an APL includes the use of a cautery device (electrosurgery) or scissors to dissect a tissue plane that errantly causes an injury to underlying bowels.

To cost-effectively expand market coverage, we focus on optimizing our distribution network comprised of direct and independent sales representatives who are managed and directed by our regional sales managers throughout the United States. In some instances, customers have recognized the patient safety risks inherent in monopolar electrosurgery and have accepted AEM technology as the way to eliminate those risks. In other instances, we have found selling the concept behind AEM technology more difficult. This difficulty is due to several factors, including the necessity to make surgeons, nurses and hospital risk managers aware of the potential for unintended electrosurgical burns (which exists when conventional instruments are used during laparoscopic monopolar electrosurgery) and the resulting increased medicolegal liability exposure. Additionally, we must contend with the overall lack of single purchasing points in the industry (surgeons, hospital personnel, and value analysis committees have to be in substantial agreement as to the benefits of new technology), and the resulting need to make multiple sales calls on personnel with the authority to commit to hospital expenditures. Other challenges include the fact that many hospitals have exclusive contractual agreements with manufacturers of competing surgical instruments.

Our goal is to optimize a network that has experience selling into the hospital operating room environment. We believe that improvement in this network offers us the best opportunity to cost effectively broaden acceptance of our product line and generate increased and recurring sales. Additionally, we are pursuing supplier agreements with the major selected GPOs, hospital systems and integrated delivery networks.

In addition to the efforts to broaden market acceptance in the United States, we have contracted with independent distributors in Canada, Australia, New Zealand and the Netherlands to market our products internationally. We have achieved Conformite Europeenne (“CE”) marking for our products so that we may sell into the European marketplace. The CE marking indicates that a manufacturer has conformed to all of the obligations imposed by European health, safety and environmental legislation. While CE certification opens up incremental markets in Europe, our distribution options in the European marketplace are yet to be developed, and sales in international markets are small.

We believe that the expanding awareness for AEM technology through education and the improved sales network of independent representatives will provide the basis for increased sales and continuing profitable operations. However, these measures, or any others that we may adopt, may not result in increased sales or profitable operations.

Research and Development

We aim to continually expand our AEM Instrument product line to satisfy the evolving needs of surgeons. For AEM technology to fully become a standard of care, we must satisfy surgeons’ preferred instrument shapes, sizes, styles and functionality with integrated AEM Instruments. This commitment includes expanding the styles of electrosurgical instruments available for MIS applications so that the conversion to AEM technology is transparent to surgeons and does not require significant change in their current surgical techniques. We employ full-time engineers and use independent contractors from time to time in our research and product development efforts. This group continuously explores ways to broaden and enhance the product line. Current research and development efforts are focused primarily on line-extension projects to further expand our AEM Instrument product offering to increase surgeons’ choices and options in laparoscopic surgery. Our research and development expenses were $1,342,411 in fiscal year 2015 and $1,407,337 in fiscal year 2014. We expense research and development costs for products and processes as incurred. Costs that are included in research and development expenses include direct salaries, contractor fees, materials, facility costs and administrative expenses that relate to research and development.

Manufacturing, Regulatory Affairs and Quality Assurance

We engage in various manufacturing and assembly activities at our leased facility in Boulder, Colorado. These operations include disposable scissor inserts manufacturing and assembly of our AEM Instrument system as well as fabrication, assembly and test operations for instruments, monitors and accessories. We also have relationships with a number of outside suppliers, including New Deantronics, Inc., who accounted for

5

Table of Contents

approximately 11% of our purchases in fiscal year 2015, who provide primary sub-assemblies, various electronic and sheet metal components, and molded parts used in our products.

We believe that the use of both internal and external manufacturing capabilities allows for increased flexibility in meeting our customer delivery requirements and significantly reduces the need for investment in specialized capital equipment. We have developed multiple sources of supply where possible. Our relationship with our suppliers is generally limited to individual purchase order agreements supplemented, as appropriate, by contractual relationships to help ensure the availability and low cost of certain products. All components, materials and sub-assemblies used in our products, whether produced in-house or obtained from others, are inspected to ensure compliance with our specifications. All finished products are subject to our quality assurance and performance testing procedures.

As discussed in the section on Government Regulation, we are subject to the rules and regulations of the United States Food and Drug Administration (“FDA”). Our leased facility of 28,696 square feet contains approximately 15,100 square feet of manufacturing, regulatory affairs and quality assurance space. The facility is designed to comply with the Quality System Regulation (“QSR”), as specified in published FDA regulations. Our latest inspection by the FDA occurred in December 2012.

We achieved CE marking in August 2000, which required prior certification of our quality system and product documentation. Maintenance of the CE marking status requires periodic audits of the quality system and technical documentation by our European Notified Body, LGA InterCert. The most recent audit was completed in October 2014.

Patents, Patent Applications and Intellectual Proprietary Rights

We have invested heavily in an effort to protect our valuable technology, and, as a result of this effort, we have been issued 11 unexpired relevant patents that together form a significant intellectual property position. Our patents relate to the basic shielding and monitoring technologies that we incorporate into our AEM products. As of March 31, 2015, we have 11 unexpired United States patents relating to specific implementations of shielding and monitoring in instruments. As of March 31, 2015, there are between one and eighteen years remaining on our AEM patents. We have seven patent applications in process and we have four trademarks.

Our technical progress depends to a significant degree on our ability to maintain patent protection for products and processes, to preserve our trade secrets and to operate without infringing the proprietary rights of third parties. Our policy is to attempt to protect our technology by, among other things, filing patent applications for technology that we consider important to the development of our business. The validity and breadth of claims covered in medical technology patents involve complex legal and factual questions and, therefore, may be highly uncertain. Even though we hold patented technology, others might copy our technology or otherwise incorporate our technology into their products.

We require our employees to execute non-disclosure agreements upon commencement of employment. These agreements generally provide that all confidential information developed or made known to the individual by us during the course of the individual’s employment is our property and is to be kept confidential and not to be disclosed to third parties.

Competition

The electrosurgical device market is intensely competitive and tends to be dominated by a relatively small group of large and well-financed companies. We compete directly for customers with those companies that currently make conventional electrosurgical instruments. Larger competitors include Advanced Surgical Technologies Group (a division of Medtronic plc) and Ethicon Endo-Surgery (a division of Johnson & Johnson). While we know of no competitor (including those referenced above) that can provide a continuous solution to stray electrosurgical burns, the manufacturers of conventional (non-monitored, non-shielded) instruments will resist any loss of market share resulting from the presence of our products in the marketplace. What clearly differentiates us from the competition is that while competitive technologies may somewhat reduce the risk of stray energy burns, only AEM Technology completely eliminates it.

We also believe that manufacturers of products based on alternative technology to monopolar electrosurgery are our competitors. These alternative technologies include other “advanced energy” technologies such as bipolar electrosurgery, laser surgery and the harmonic scalpel. Leading manufacturers in these areas include Advanced Surgical Technologies Group, Gyrus/ACMI (a division of Olympus Corporation and a leader in bi-polar electrosurgery), Lumenis (laser surgery) and Ethicon Endo-Surgery (a division of Johnson and Johnson, manufacturers of the harmonic scalpel). We believe that monopolar electrosurgery offers substantial competitive, functional and financial advantages over these alternative energy technologies and will remain the primary tool for the surgeon, as it has been for decades. However, the risk exists that these alternative technologies may gain greater market share and that new competitive techniques may be developed and introduced.

As mentioned in the Sales and Marketing discussion, the competitive issues involved in selling our AEM product line do not primarily revolve around a comparison of cost or features, but rather involve generating an awareness of the inherent hazards of electrosurgery and the potential for injury to the patient. This involves conceptual selling, rather than just product selling, which results in a longer sales cycle and generally higher sales costs. Independent endorsements of AEM technology have greatly enhanced the credibility of AEM Instruments. However, our efforts to increase market awareness of this technology may not be successful, and our competitors may develop alternative strategies and/or products to counter our marketing efforts.

Many of our competitors and potential competitors have widely-used products and significantly greater financial, technical, product development, marketing and other resources. In addition to our direct sales force, we utilize a network of independent distributor representatives in selected areas. In some cases, our options for independent distribution have conflicting and competing product interests which compromise our ability to make market advances in certain areas. We may not be able to compete successfully against current and future competitors, and competitive pressures faced by us may have a material adverse impact on our business, operating results and financial condition.

6

Table of Contents

Government Regulation

Government regulation in the United States and other countries is a significant factor in the development and marketing of our products and in our ongoing manufacturing, research and development activities. The FDA regulates us and our products under a number of statutes, including the Federal Food, Drug and Cosmetics Act (the “FDC Act”). Under the FDC Act, medical devices are classified as Class I, II or III on the basis of the controls deemed necessary to reasonably ensure their safety and effectiveness. Class I devices are subject to the least extensive controls, as their safety and effectiveness can be reasonably assured through general controls (e.g., labeling, pre-market notification and adherence to QSR). For Class II devices, safety and effectiveness can be assured through the use of special controls (e.g., performance standards, post-market surveillance, patient registries and FDA guidelines). Class III devices (e.g., life-sustaining or life-supporting implantable devices or new devices which have been found not to be substantially equivalent to legally marketed devices) require the highest level of control, generally requiring pre-market approval by the FDA to ensure their safety and effectiveness. Our products are Class III devices.

If a manufacturer or distributor of medical devices can establish that a proposed device is “substantially equivalent” to a legally marketed Class I or Class II medical device or to a Class III medical device for which the FDA has not required a pre-market approval application, the manufacturer or distributor may seek FDA marketing clearance for the device by filing a 510(k) pre-market notification. Following submission of the 510(k) notification, the manufacturer or distributor may not place the device into commercial distribution in the United States until an order has been issued by the FDA. The FDA’s target for issuing such orders is within 90 days of submission, but the process can take significantly longer. The order may declare the FDA’s determination that the device is “substantially equivalent” to another legally marketed device and allow the proposed device to be marketed in the United States. The FDA may, however, determine that the proposed device is not substantially equivalent or may require further information, such as additional test data, before making a determination regarding substantial equivalence. Any adverse determination or request for additional information could delay market introduction and have a material adverse effect on our continued operations. We have received a favorable 510(k) notification for our AEM monitors and AEM Instruments, all of which are designated as Class II medical devices.

Labeling and promotional activities are subject to scrutiny by the FDA and, in certain instances, by the Federal Trade Commission. The FDA also imposes post-marketing controls on us and our products, and registration, listing, medical device reporting, post-market surveillance, device tracking and other requirements on medical devices. Failure to meet these pervasive FDA requirements or adverse FDA determinations regarding our clinical and preclinical trials could subject us and/or our employees to injunction, prosecution, civil fines, seizure or recall of products, prohibition of sales or suspension or withdrawal of any previously granted approvals, which could lead to a material adverse impact on our financial position and results of operations.

The FDA regulates our quality control and manufacturing procedures by requiring us and our contract manufacturers to demonstrate compliance with the QSR as specified in published FDA regulations. The FDA requires manufacturers to register with the FDA, which subjects them to periodic FDA inspections of manufacturing facilities. If violations of applicable regulations are noted during FDA inspections of our manufacturing facilities or the facilities of our contract manufacturers, the continued marketing of our products may be adversely affected. Such regulations are subject to change and depend heavily on administrative interpretations. In December 2012, the FDA conducted a QSR inspection of our facilities. We believe that we have the internal resources and processes in place to be reasonably assured that we are in compliance with all applicable United States regulations regarding the manufacture and sale of medical devices. However, if we were found not to be in compliance with the QSR, in the future, such findings could result in a material adverse impact on our financial condition, results of operations and cash flows.

Sales of medical devices outside of the United States are subject to United States export requirements and foreign regulatory requirements. Legal restrictions on the sale of imported medical devices vary from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA approval and the requirements may differ. Our Certificate of Export from the United States Department of Health and Human Services has expired and we will seek to renew it. However, a specific foreign country in which we wish to sell our products may not accept or continue to accept the Certificate of Export. Entry into the European Economic Area market also requires prior certification of our quality system and product documentation. We achieved CE marking in August 2000, allowing a launch into the European marketplace. Maintenance of the CE marking status requires annual audits of the quality system and technical documentation by our European Notified Body, TUV Rheinland. The most recent audit was completed in October 2014. In addition to licensing, entry into the Canadian market now requires quality system certification to ISO 13485:2003. Our quality system was audited in 2014 and recertification was granted in January 2015, and certification verified by TUV Rheinland.

Environmental Laws and Regulations

From time to time we receive materials returned from customers, sales representatives and other sources which are potentially biologically hazardous. These materials are segregated, and disposed of in accordance with specific procedures that minimize potential exposure to employees. The costs of compliance with these procedures are not significant. Our operations, in general, do not involve the use of environmentally sensitive materials.

Insurance

We are covered under comprehensive general liability insurance policies, which have per occurrence and aggregate limits of $1 million and $2 million, respectively, and a $5 million umbrella policy. We maintain customary property and casualty, workers’ compensation, employer liability and other commercial insurance policies.

Employees

As of March 31, 2015, we employed 43 full-time individuals, of which 12 are engaged directly in research, development and regulatory activities, 19 in manufacturing/operations, 8 in marketing and sales and 4 in administrative positions. None of our employees are covered by a collective bargaining agreement, and we consider our relations with our employees to be good.

7

Table of Contents

Item 1A.  Risk Factors

You should carefully consider the risk factors described below. If any of the following risk factors actually occur, our business, prospects, financial condition or results of operations would likely suffer. In such case, the trading price of our common stock could fall, resulting in the loss of all or part of your investment. You should look at all these risk factors in total. Some risk factors may stand on their own. Some risk factors may affect (or be affected by) other risk factors. You should not assume we have identified these connections. You should not assume that we will always update these and future risk factors in a timely manner. We are not undertaking any obligation to update these risk factors to reflect events or circumstances after the date of this report or to reflect the occurrence of unanticipated events.

Among the factors that could cause future results and financial condition to be materially different from expectations are:

Our products may not be accepted by the market. The success of our products and our financial condition depends on the acceptance of AEM products by the medical community in commercially viable quantities during fiscal year 2016 and beyond. We cannot predict how quickly or how broadly AEM products will be accepted by the medical community. We need to continually educate the marketplace about the potential hazards involved in the use of conventional electrosurgical products during MIS procedures and the expected benefits associated with the use of AEM products. If we are unsuccessful in educating the marketplace about our technology and the hazards of conventional instruments, we will not create sufficient demand by hospitals and surgeons for AEM products and our financial condition, results of operations and cash flows could be adversely affected.

We need to continually develop and train our network of direct and independent sales representatives and expand our distribution efforts in order to be successful. Our attempts to develop and train a network of direct and independent sales representatives in the U.S. and to expand our international distribution efforts may take longer than expected and may result in considerable amounts of retraining effort as the direct and independent sales representatives change their product lines, product focus and personnel. We may not be able to obtain full coverage of the U.S. by direct and independent sales representatives as quickly as anticipated. The independent sales representative network has inherent flaws and inefficiencies, which can include conflicts of interest and competing products. Optimizing the quality of the network and the performance of direct and independent sales representatives in the U.S. is an ongoing challenge. We may also encounter difficulties in developing our international presence due to regulatory issues and our ability to successfully develop international distribution options. Our inability to expand our network of direct and independent sales representatives and optimize their performance could adversely affect our financial results.

We may need additional funding to support our operations. We were formed in 1991 and have incurred losses of approximately $20 million since that date. We have primarily financed research, development and operational activities with issuances of our common stock and warrants, the exercise of stock options to purchase our common stock, stock-based expense related to stock options and, in some years, by operating profits. At March 31, 2015, we had $258,656 in cash available to fund future operations and, in addition, access to a line of credit for approximately $517,000. We may find that investment in sales, marketing, research and development initiatives, merited by market opportunity, may result in our operating at a net loss from quarter to quarter. We may also find ourselves at a competitive disadvantage due to our constrained liquidity. On December 17, 2013, we completed a private placement of 2,463,125 shares of our common stock. The private placement raised, before costs, a total of $1,970,500. The purchase price per share for the shares sold in the private placement was $0.80, representing a discount of approximately 12% based on a 20-day volume-weighted average price as of December 13, 2013. Additionally, the investors received common stock purchase warrants. The warrants are exercisable into 1,231,563 shares of the Company’s common stock with an exercise price of $1.20 per share and a term of five years. On May 29, 2015, we signed an amendment to our credit facility agreement with Silicon Valley Bank. The terms of the credit facility include a line of credit for $2,000,000 for one year at an interest rate calculated at the prime rate plus 1.25%, subject to increase upon a default. The liquidity ratio covenant of the agreement limits our borrowing under the credit facility by a ratio of at least 2.0 to 1.0 of our eligible receivables plus cash, minus accounts payable that are over sixty days, at the time of borrowing. As of March 31, 2015, we had $64,000 of borrowings from the credit facility and, under our liquidity ratio limit, had an additional approximately $517,000 available to borrow. The credit facility requires us to meet certain financial covenants. If we fail to comply with the restrictions contained in the credit facility and the lender does not waive such noncompliance, the resulting event of default could result in the lender accelerating the repayment of all outstanding amounts due under the credit facility or in our ability to receive additional funds under the credit facility. There can be no assurance that we would be successful in obtaining alternative sources of funding to repay these obligations should this event occur. In addition, should we need additional financing, we may not be able to obtain it on terms acceptable to us or at all.

We may not be able to compete successfully against current manufacturers of conventional (“unshielded, unmonitored”) electrosurgical instruments or against competitors who manufacture products that are based on surgical technologies that are alternatives to monopolar electrosurgery. The electrosurgical products market is intensely competitive. We expect that manufacturers of “unshielded, unmonitored” electrosurgical instruments will resist any loss of market share that might result from the presence of our “shielded and monitored” instruments in the marketplace. We also believe that manufacturers of products that are based upon surgical technologies that are alternatives to monopolar electrosurgery are our competitors. These technologies include bipolar electrosurgery, the harmonic scalpel and lasers. The alternative technologies may gain market share and new competitive technologies may be developed and introduced. Most of our competitors and potential competitors have significantly greater financial, technical, product development, marketing and other resources than we do. Most of our competitors also currently have substantial customer bases in the medical products market and have significantly greater market recognition than we have. As a result of these factors, our competitors may be able to respond more quickly to new or emerging technologies and changes in customer requirements or to devote greater resources to the development, promotion and sale of their products. It is possible that new competitors or new alliances among competitors may emerge and rapidly acquire significant market share. The competitive pressures we face may materially adversely affect our financial position, results of operations and cash flows, and this may hinder our ability to respond to competitive threats.

If we do not continually enhance our products and keep pace with rapid technological changes, we may not be able to attract and retain customers. Our future success and financial performance will depend in part on our ability to meet the increasingly sophisticated needs of customers through the timely development and successful introduction of product upgrades, enhancements and new products. These upgrades, enhancements and new products are subject to significant technological risks. The medical device market is subject to rapid technological change, resulting in frequent new product introductions and enhancements of existing products, as well as the risk of product obsolescence. While we are currently developing new products and enhancing our existing product lines, we may not be successful in completing the development of new products or enhancements. In addition, we must respond effectively to technological changes by continuing to enhance our existing products to incorporate emerging or evolving standards. We may not be successful in developing and marketing product enhancements or new products that

8

Table of Contents

respond to technological changes or evolving industry standards. We may experience difficulties that could delay or prevent the successful development, introduction and marketing of those products, and our new products and product enhancements may not adequately meet the requirements of the marketplace and achieve commercially viable levels of market acceptance. If any potential new products, upgrades, or enhancements are delayed, or if any potential new products, upgrades, or enhancements experience quality problems or do not achieve market acceptance, or if new products make our existing products obsolete, our financial position, results of operations and cash flows would be materially adversely affected.

If government regulations change or if we fail to comply with existing and/or new regulations, we might miss market opportunities and experience increased costs and limited growth. The research, development, manufacturing, marketing and distribution of our products in the United States and other countries are subject to extensive regulation by numerous governmental authorities including, but not limited to, the Food and Drug Administration. Under the Federal Food, Drug and Cosmetic Act, medical devices must receive clearance from the Food and Drug Administration through the Section 510(k) pre-market notification process or through the more lengthy pre-market approval process before they can be sold in the United States. The process of obtaining required regulatory approvals is lengthy and has required the expenditure of substantial resources. There can be no assurance that we will be able to continue to obtain the necessary approvals. As part of our strategy, we also intend to pursue commercialization of our products in international markets. Our products are subject to regulations that vary from country to country. The process of obtaining foreign regulatory approvals in certain countries can be lengthy and require the expenditure of substantial resources. We may not be able to obtain necessary regulatory approvals or clearances on a timely basis or at all, and delays in receipt of or failure to receive such approvals or clearances, or failure to comply with existing or future regulatory requirements would have a material adverse effect on our financial position, results of operations and cash flows.

If we fail to comply with the extensive regulatory requirements governing the manufacturing of our products, we could be subject to fines, suspensions or withdrawals of regulatory approvals, product recalls, suspension of manufacturing, operating restrictions and/or criminal prosecution. The manufacturing of our products is subject to extensive regulatory requirements administered by the Food and Drug Administration and other regulatory agencies. Inspection of our manufacturing facilities and processes can be conducted at any time, without prior notice, by the Food and Drug Administration and such regulatory agencies. In addition, future changes in regulations or interpretations made by the Food and Drug Administration or other regulatory agencies, with possible retroactive effect, could adversely affect us. Changes in existing regulations or adoption of new regulations or policies could prevent us from obtaining, or affect the timing of, future regulatory approvals or clearances. We may not be able to obtain necessary regulatory approvals or clearances on a timely basis in the future, or at all. Delays in receipt of, failure to receive such approvals or clearances and/or failure to comply with existing or future regulatory requirements would have a material adverse effect on our financial position, results of operations and cash flows.

Our current patents, trade secrets and know-how may not provide a competitive advantage, the pending applications may not result in patents being issued, and our competitors may design around any patents issued to us. Our success will continue to depend in part on our ability to maintain patent protection for our products and processes, to preserve our trade secrets and to operate without infringing the proprietary rights of third parties. We have 11 issued U.S. patents on several technologies embodied in our AEM Monitoring System, AEM Instruments and related accessories and we have applied for additional U.S. patents. In addition, we have four issued foreign patents. The validity and breadth of claims coverage in medical technology patents involve complex legal and factual questions and may be highly uncertain. Also, patents may not protect our proprietary information and know-how or provide adequate remedies for us in the event of unauthorized use or disclosure of such information, and others may be able to develop competing technology, independent of such information. There has been substantial litigation regarding patent and other intellectual property rights in the medical device industry. Litigation may be necessary to enforce patents issued to us, to protect trade secrets or know-how owned by us, to defend us against claimed infringement of the rights of others or to determine the ownership, scope or validity of our proprietary rights or those of others. Any such claims may require us to incur substantial litigation expenses and to divert substantial time and effort of management personnel and could substantially decrease the amount of capital available for our operations. An adverse determination in litigation involving the proprietary rights of others could subject us to significant liabilities to third parties, could require us to seek licenses from third parties, and could prevent us from manufacturing, selling or using our products. The occurrence of any such actual or threatened litigation or the effect on our business of such litigation may materially adversely affect our financial position, results of operations and cash flows. Additionally, our assessment that a patent is no longer of value could result in a significant charge against our earnings.

We depend on single source suppliers for certain of the key components of our products and sub-contractors to provide much of the materials used in the manufacturing of our products. The loss of a supplier or limitation in supply from existing suppliers could have a material adverse effect on our ability to manufacture our products until a new source of supply is located. Although we believe that there are alternative suppliers, any interruption in the supply of key components could have a material adverse effect on us. A sudden increase in customer demand may create a backorder situation as lead times for some of our critical materials are in excess of 12 weeks. We rely on subcontractors to provide products, either in the form of finished goods or sub-assemblies that we then assemble and test. While these sub-contractors reduce our total cost of manufacturing, they may not be as responsive to increased demand as we would be if we had our manufacturing capacity entirely in-house, which may limit our growth strategy and sales.

The potential fluctuation in future quarterly results may cause our stock price to fluctuate. We expect that our operating results could fluctuate significantly from quarter to quarter in the future and will depend upon a number of factors, many of which are outside our control. These factors include the extent to which our AEM technology and related accessories gain market acceptance; our investments in marketing, sales, research and development and administrative personnel necessary to support growth; our ability to expand our market share; actions of competitors; and, general economic conditions. The market value of our common stock has dramatically fluctuated in the past and is likely to fluctuate in the future. Any of these factors, or factors not listed, could have an immediate and significant negative impact on the market price of our stock.

Our common stock is thinly traded, the prices at which it trades are volatile and the buying or selling actions of a few shareholders may adversely affect our stock price. As of May 31, 2015, we had a public float, which is defined as shares outstanding minus shares held by our officers, directors, or beneficial holders of greater than 5% of our outstanding common stock, of 5,596,028 shares, or 52% of our outstanding common stock. The average number of shares traded in any given day over the past year has been relatively small compared to the public float. Thus, the actions of a few shareholders either buying or selling shares of our common stock may adversely affect the price of the

9

Table of Contents

shares. Historically, thinly-traded securities such as our common stock have experienced extreme price and volume fluctuations that do not necessarily relate to operating performance.

Product liability claims may exceed our current insurance coverage. We face an inherent business risk of exposure to product liability claims in the event that the use of our products is alleged to have resulted in adverse effects to a patient. We maintain a general liability insurance policy up to the amount of $5,000,000 that includes coverage for product liability claims. Liability claims may be excluded from the policy, may exceed the coverage limits of the policy, or the insurance may not continue to be available on commercially reasonable terms or at all. Consequently, a product liability claim or other claim with respect to uninsured liabilities or in excess of insured liabilities could have a material adverse effect on our financial position, results of operations and cash flows.

We depend on certain key personnel. We are highly dependent on a limited number of key management personnel, particularly our President and CEO, Gregory J Trudel. Our loss of key personnel to death, disability or termination, or our inability to hire and retain qualified personnel, could have a material adverse effect on our financial position, results of operations and cash flow.

Item 1B.  Unresolved Staff Comments

Not required for small reporting companies.

Item 2.  Properties

We lease 28,696 square feet of office and manufacturing space under noncancelable lease agreements through July 31, 2019 at 6797 Winchester Circle, Boulder, Colorado. We believe that our existing facilities are adequate for our current operations.

Item 3.  Legal Proceedings

We have been named as a defendant in 59 separate (but similar) product liability lawsuits relating to a surgical mesh product manufactured by another company. We did not distribute or sell the manufacturer’s mesh product, which is the subject of these lawsuits. We believe that we have been named as a defendant in these lawsuits only because we served as a distributor for other unrelated products of that manufacturer. We believe that we have meritorious defenses to these lawsuits. We believe that these lawsuits will be covered by our insurance policies.

Based on currently available information, we believe that the resolution of these lawsuits is not likely to have a material adverse effect on our business, financial position or future results of operations. In accordance with generally accepted accounting principles in the United States (U.S. GAAP), we record a liability when it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated. These provisions are reviewed at least quarterly and adjusted to reflect the impacts of negotiations, settlements, rulings, advice of legal counsel, and other information and events pertaining to a particular case.

Item 4.  (Removed and Reserved)

10

Table of Contents

PART II

Item 5.  Market for Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

Our common stock has been quoted on the OTCQB Marketplace (“OTCQB) operated by the OTC Markets Group, Inc. The ticker symbol “ECIA” has been assigned to our common stock for over-the-counter quotations. The following table shows the range of high and low bid quotations for each share of our common stock on the OTCQB, as applicable, for the periods indicated. The bid quotations on the OTCQB reflect inter-dealer prices, without retail mark-up, mark-down or commission and may not necessarily represent actual transactions.

We have never paid cash dividends on our common stock and have no present plans to do so. We presently intend to retain any cash generated from operations in the future for use in our business. As of March 31, 2015, there were approximately 100 holders of record of our common stock.

Item 6.  Selected Financial Data

Not required for smaller reporting companies.

Item 7.         Management’s Discussion and Analysis of Financial Condition and Results of Operations

Certain statements contained in this section are not historical facts, including statements about our strategies and expectations about new and existing products, market demand, acceptance of new and existing products, technologies and opportunities, market and industry segment growth, and return on investments in products and markets. These statements are forward looking statements within the meaning of the Private Securities Litigation Reform Act of 1995 and involve substantial risks and uncertainties that may cause actual results to differ materially from those indicated by the forward looking statements. All forward looking statements in this section are based on information available to us on the date of this document, and we assume no obligation to update such forward looking statements. Readers of this Form 10-K are strongly encouraged to review the section entitled “Risk Factors”.

Outlook

Installed Base of AEM Monitoring Equipment.  We believe that we are gaining more awareness in medico-legal circles and publications and from presentations at medical meetings. We believe that improvement in the quality of sales representatives carrying our AEM product line, along with increased marketing efforts and the introduction of new products, may provide the basis for increased sales and continuing profitable operations. However, these measures, or any others that we may adopt, may not result in either increased sales or continuing profitable operations.

Possibility of Operating Losses.  We have an accumulated deficit of $20,340,117 at March 31, 2015. We have made significant strides toward improving our operating results. However, due to the ongoing need to develop new products, the need to develop, optimize and train our sales distribution network and the need to increase sustained sales to a level adequate to cover fixed and variable operating costs, we may operate at a net loss in future periods.

Sales Growth.  We expect to generate increased sales in the U.S. from sales to new hospital customers and to grow AEM instrumentation sales to existing accounts. In fiscal year 2016, we will focus on growing our AEM franchise through a campaign focused on the clinical, economic and safety benefits of AEM technology, a medico-legal initiative and our new AEM products. In addition, prior years’ efforts in vertical integration have given us three core competencies — electrosurgery, instrument design, and manufacturing — which we expect will allow us to increase sales from our strategic partnership initiatives. Our goal is to offer our customers an AEM disposable counterpart for each AEM reusable instrument.

Gross Margin.  We believe that if our fiscal year 2016 revenues increase, then our fiscal year 2016 gross profit and gross margin, as a percentage of revenue, will increase due to a higher gross margin on product revenue as a result of an increase in product produced.

Sales and Marketing Expenses.  We continue our efforts to expand domestic and international distribution capability, and we believe that sales and marketing expenses will need to be maintained at a healthy level in order to expand our market visibility and optimize the field sales capability of converting new hospital customers to AEM technology. Sales and marketing expenses are expected to increase as we increase our marketing efforts to support our direct sales representatives. In fiscal year 2016, we expect to have 13 direct sales territories and three direct sales managers. Each direct sales manager also manages a separate territory.

Manufacturing.  We believe that we will be able to achieve cost reductions, and provide better control over quality and consistency, by producing products on our own. We manufacture our own disposable scissor inserts and are exploring other products that we may manufacture internally.

Research and Development Expenses.  Research and development expenses are expected to increase to support expansion to our AEM product line, which will further expand the instrument options for the surgeon. New refinements to AEM product lines are planned for introduction in fiscal year 2016.

11

Table of Contents

Results of Operations

Net Revenue. Our net revenue for the fiscal year ended March 31, 2015 (“FY 15”) was $9,671,481, and for the fiscal year ended March 31, 2014 (“FY 14”), net revenue was $10,546,637. This represents a decrease of $875,156, or 8%, in FY 15 from FY 14. The decrease is attributable to business lost from hospitals that stopped or reduced using AEM technology. This was partially offset by new hospital accounts for AEM technology, which increased the installed base of users of reusable and disposable AEM Surgical Instruments.

Gross profit.  Gross profit in FY 15 was $4,694,223, which represented a decrease of $786,744, from gross profit in FY 14 of $5,480,967. The comparison to FY 14 gross profit excludes cost of sales for product impairment of $1,100,368 (see Note 10) in FY 14. Gross profit margin was 48.5% of net revenue for FY 15 and 52% of net revenue for FY 14, after excluding cost of sales for product impairment of $1,100,368 in FY 14. The gross profit margin decrease from FY 14 was due to increased inventory reserves and higher unit overhead costs on lower sales volume.

Sales and marketing expenses.  Sales and marketing expenses were $2,921,295 in FY 15, a decrease of $30,611, or 1%, from $2,951,906 in FY 14. The decrease was the result of reduced compensation, reduced field sales expense, reduced trade show expenses and reduced travel and meals. The decrease was partially offset by increased commissions for increased independent representatives, increased advertising and outside services.

General and administrative expenses.  General and administrative expenses were $1,615,006 in FY 15, an increase of $82,600, or 5%, from $1,532,406 in FY 14. The increase was the result of increased compensation, board of directors’ fees and regulatory fees. The net increase was partially offset by reduced outside services costs, investor relations and legal fees.

Research and development expenses.  Research and development expenses were $1,342,411 in FY 15, a decrease of $64,926 or 5%, from $1,407,337 in FY 14. The decrease was the result of a decrease of compensation, consulting services and temporary help, test materials and tooling costs. The net decrease was partially offset by increased inventory usage and outside services.

Other income and expense, net.  Other income and expense, net includes $209,703 for the medical device excise tax in FY 15 and $232,906 in FY 14.

Net loss.  Net loss in FY 15 of $1,382,746 represented a loss decrease of $398,932 compared to FY 14 net loss of $1,781,678, which included a product impairment cost of $1,100,368. After excluding the product impairment cost of $1,100,368 for FY 14, the net loss in FY 15 represented a loss increase of $701,436. The increased loss was primarily the result of reduced revenue and lower gross profit margins, as discussed above. The net loss increase was partially offset by slightly reduced operating expenses, as discussed above.

Liquidity and Capital Resources

To date, operating funds have been provided primarily by issuances of our common stock and warrants, the exercise of stock options to purchase our common stock and, in some years, by operating profits. To date, common stock and additional paid in capital totaled $23,607,688 from our inception through March 31, 2015. Our operations used $1,432,771 and provided $111,206 of cash in FY 15 and FY 14, respectively, on revenue of $9,671,481 and $10,546,637 in FY 15 and FY 14, respectively. These amounts of cash generated from operations are not indicative of the expected cash to be generated from or used by operations in the fiscal year ending March 31, 2016 (“FY 16”). As of March 31, 2015, we had $258,656 in cash and cash equivalents, and under our liquidity ratio limit, had an additional approximately $517,000 available under our credit facility to fund future operations. Working capital was $2,378,427 at March 31, 2015 compared to $3,405,671 at March 31, 2014. The decrease in working capital was primarily caused by a decrease of cash as a result of the net loss for FY 15. The decrease of working capital was partially offset by an increase of net accounts receivable and an increase of net inventories. Current liabilities were $1,292,916 at March 31, 2015, compared to $1,436,744 at March 31, 2014. The decrease in current liabilities at March 31, 2015 was primarily caused by a decrease of other accrued liabilities and a short term lease payable.

On December 17, 2013, we completed a private placement of 2,463,125 shares of our common stock. The private placement raised, before costs, a total of $1,970,500. The purchase price per share for the shares sold in the private placement was $0.80, representing a discount of approximately 12% based on a 20-day volume-weighted average price as of December 13, 2013. Additionally, the investors received common stock purchase warrants. The warrants are exercisable into 1,231,563 shares of the Company’s common stock with an exercise price of $1.20 per share and a term of five years.

On May 29, 2015, we signed an amendment to our credit facility agreement with Silicon Valley Bank. The terms of the credit facility include a line of credit for $2,000,000 for one year at an interest rate calculated at the prime rate plus 1.25%, subject to increase upon a default. The liquidity ratio covenant limits our borrowing under the credit facility by a ratio of at least 2.0 to 1.0 of our eligible receivables plus cash, minus accounts payable that are over sixty days, at the time of borrowing. As of March 31, 2015, we had $64,000 of borrowings from the credit facility and, under our liquidity ratio limit, had an additional approximately $517,000 available to borrow. Our credit facility agreement requires us to meet certain financial covenants.

We believe that the unique performance of AEM technology and our breadth of independent endorsements provide an opportunity for market share growth. We believe that the market awareness of AEM technology and its endorsements is continually improving and that this will benefit revenue efforts in FY 16. We believe that we enter FY 16 having achieved improvements in the clinical credibility of our technology. Our FY 16 operating plan is focused on growing revenue, increasing gross profits, increasing research and development costs while increasing profits and positive cash flows. We cannot predict with certainty the expected revenue, gross profit, net income or loss and usage of cash and cash equivalents for FY 16. We believe that cash resources and borrowing capacity will be sufficient to fund our operations for at least the next twelve months under our current operating plan. If we are unable to manage business operations in line with our budget expectations, it could have a material adverse effect on business viability, financial position, results of operations and cash flows. Further, if we are not successful in sustaining profitability and remaining at least cash flow break-even, additional capital may be required to maintain ongoing operations.

12

Table of Contents

We have explored and are continuing to explore options to provide additional financing to fund future operations as well as other possible courses of action. Such actions include, but are not limited to, securing a larger credit facility, sales of debt or equity securities (which may result in dilution to existing shareholders), licensing of technology, strategic alliances and other similar actions. There can be no assurance that we will be able to obtain additional funding (if needed) through a sale of our common stock or loans from financial institutions or other third parties or through any of the actions discussed above on terms acceptable to us or at all. If we cannot sustain profitable operations and additional capital is unavailable, lack of liquidity could have a material adverse effect on our business viability, financial position, results of operations and cash flows.

Income Taxes

As of March 31, 2015, net operating loss carryforwards totaling approximately $10.5 million were available to reduce taxable income in the future. The net operating loss carryforwards expire, if not previously utilized, at various dates beginning in fiscal year 2019. We have not paid income taxes since our inception. The Tax Reform Act of 1986 and other income tax regulations contain provisions which may limit the net operating loss carryforwards available to be used in any given year if certain events occur, including changes in our ownership. We have established a valuation allowance for the entire amount of our deferred tax asset since inception due to our history of losses. Should we achieve sufficient, sustained income in the future, we may conclude that some or all of the valuation allowance should be reversed.

Off-Balance Sheet Financing Arrangements

Except as described below, we do not utilize variable interest entities or other off-balance sheet financial arrangements.

We have a commitment for our facility at 6797 Winchester Circle, Boulder, Colorado. Rent expense for our facilities for the fiscal years ended March 31, 2015 and 2014 was $254,990 and $256,709, respectively.

Contractual Obligations

Effective December 1, 2013, we extended our noncancelable lease agreement through July 31, 2019 for 28,696 square feet of space for our facilities at 6797 Winchester Circle, Boulder, Colorado. The lease includes $172,176 of leasehold improvements granted by the landlord. The $172,176 was recorded on our balance sheets as leasehold improvements and deferred rent. The leasehold improvements are being amortized over the lesser of the lease term or the assets life and the deferred rent is being amortized against rent expense over the lease term. The minimum future lease payment, by fiscal year, as of March 31, 2015 is as follows:

We paid off our capital equipment lease with General Electric Capital Corporation and, at March 31, 2015, have no balance remaining.

Included in our furniture, fixtures and equipment balance is leased equipment that was acquired, under the provisions of a long-term capital lease, during the quarter ended June 30, 2013. The equipment had an original cost of $177,547 and has a net book value of $86,069 at March 31, 2015.

On May 29, 2015, we signed an amendment to our credit facility agreement with Silicon Valley Bank. The terms of the credit facility include a line of credit for $2,000,000 for one year at an interest rate calculated at the prime rate plus 1.25%, subject to increase upon a default. The liquidity ratio covenant limits our borrowing under the credit facility by a ratio of at least 2.0 to 1.0 of our eligible receivables plus cash, minus accounts payable that are over sixty days, at the time of borrowing. The credit facility is secured by all tangible and intangible assets, whether now owned or hereafter acquired, wherever located.

As of March 31, 2015, the following table shows our contractual obligations for the periods presented:

Aside from the operating and capital leases, we do not have any material contractual commitments requiring settlement in the future.

Critical Accounting Policies and Estimates

Our discussion and analysis of our financial condition and results of operations are based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, sales and expenses, and related disclosure of contingent assets and

13

Table of Contents

liabilities. On an on-going basis, we evaluate our estimates, including those related to bad debts, inventories, sales returns, warranty, contingencies and litigation. We base our estimates on historical experience and on various other assumptions that are believed to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions. We believe the following critical accounting policies affect the more significant judgments and estimates used in the preparation of our financial statements.

We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances would be required, which would increase our expenses during the periods in which any such allowances were made. The amount recorded as a provision for bad debts in each period is based upon our assessment of the likelihood that we will be paid on our outstanding receivables, based on customer-specific as well as general considerations. To the extent that our estimates prove to be too high, and we ultimately collect a receivable previously determined to be impaired, we may record a reversal of the provision in the period of such determination.

We provide for the estimated cost of product warranties at the time sales are recognized. While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of our component suppliers, we have experienced some costs related to warranty. The warranty accrual is based upon historical experience and is adjusted based on current experience. Should actual warranty experience differ from our estimates, revisions to the estimated warranty liability would be required.

We reduce inventory for estimated obsolete or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required. Any write-downs of inventory would reduce our reported net income during the period in which such write-downs were applied.

We recognize deferred income tax assets and liabilities for the expected future income tax consequences, based on enacted tax laws, of temporary differences between the financial reporting and tax bases of assets and liabilities. Deferred tax assets are then reduced, if deemed necessary, by a valuation allowance for the amount of any tax benefits which, more likely than not based on current circumstances, are not expected to be realized. Should we achieve sufficient, sustained income in the future, we may conclude that all or some of the valuation allowance should be reversed.

Property and equipment are stated at cost, with depreciation computed over the estimated useful lives of the assets, generally three to seven years. We use the straight-line method of depreciation for property and equipment. Leasehold improvements are depreciated over the shorter of the remaining lease term or the estimated useful life of the asset. Maintenance and repairs are expensed as incurred and major additions, replacements and improvements are capitalized.

We amortize our patent costs over their estimated useful lives, which is typically the remaining statutory life. From time to time, we may be required to adjust these lives based on advances in technology, competitor actions, and the like. We review the recorded amounts of patents at each period end to determine if their carrying amount is still recoverable based on our expectations regarding sales of related products. Such an assessment, in the future, may result in a conclusion that the assets are impaired, with a corresponding charge against earnings.

Stock-based compensation is presented in accordance with the guidance of Financial Accounting Standards Board (“FASB”) Accounting Standards Codification (“ASC”) Topic 718, Compensation — Stock Compensation (“ASC 718”). Under the provisions of ASC 718, companies are required to estimate the fair value of share-based payment awards made to employees and directors including employee stock options based on estimated fair values on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our statement of operations.

Item 7A.  Quantitative and Qualitative Disclosures About Market Risk

Not required.

14

Table of Contents

Item 8.  Financial Statements and Supplementary Data

The following financial statements are included in this Report:

15

Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Shareholders of

Encision Inc.

Boulder, Colorado

We have audited the accompanying balance sheets of Encision Inc. (the “Company”) as of March 31, 2015 and 2014 and the related statements of operations, shareholders’ equity and cash flows for the years then ended. These financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company has determined that it is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Encision Inc. as of March 31, 2015 and 2014, and the results of its operations and its cash flows for the years then ended, in conformity with accounting principles generally accepted in the United States of America.

/s/   Eide Bailly LLP

Greenwood Village, Colorado

June 19, 2015

16

Table of Contents

Encision Inc.

Balance Sheets

The accompanying notes to financial statements are an integral part of these statements.

17

Table of Contents

Encision Inc.

Statements of Operations

The accompanying notes to financial statements are an integral part of these statements.

18

Table of Contents

Encision Inc.

Statements of Shareholders’ Equity

The accompanying notes to financial statements are an integral part of these statements.

19

Table of Contents

Encision Inc.

Statements of Cash Flows

The accompanying notes to financial statements are an integral part of these statements.

20

Table of Contents

ENCISION INC.

NOTES TO FINANCIAL STATEMENTS

1. Description of Business

Encision Inc. is a medical device company that designs, develops, manufactures and markets patented surgical instruments that provide greater safety to patients undergoing minimally-invasive surgery. We believe that our patented AEM® surgical instrument technology is changing the marketplace for electrosurgical devices and instruments by providing a solution to a well-documented risk in laparoscopic surgery. Our sales to date have been made primarily in the United States.

We have an accumulated deficit of $20,340,117 at March 31, 2015. Operating funds have been provided primarily by issuances of our common stock and warrants, the exercise of stock options to purchase our common stock, and, in recent years, by operating profits. Our liquidity has diminished because of prior years’ operating losses, and we may be required to seek additional capital in the future.

Our strategic marketing and sales plan is designed to expand the use of our products in surgically active hospitals in the United States.

2. Summary of Significant Accounting Policies

Use of Estimates in the Preparation of Financial Statements.  The preparation of financial statements in conformity with accounting principles generally accepted in the United States (“GAAP”) requires management to make estimates and assumptions. Such estimates and assumptions affect the reported amounts of assets and liabilities as well as disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of sales and expense during the reporting period. Actual results could differ from those estimates.

Cash and Cash Equivalents.  For purposes of reporting cash flows, we consider all cash and highly liquid investments with an original maturity of three months or less to be cash equivalents.

Fair Value of Financial Instruments.  Our financial instruments consist of cash and cash equivalents and short-term trade receivables, payables and line of credit. The carrying values of cash and cash equivalents, short-term receivables, payables and line of credit approximate their fair value due to their short maturities.

Concentration of Credit Risk. Financial instruments, which potentially subject us to concentrations of credit risk, consist of cash and cash equivalents, accounts receivable and accounts payable. The carrying value of all financial instruments approximates fair value. The amount of cash on deposit with financial institutions occasionally exceeds the $250,000 federally insured limit at March 31, 2015. However, we believe that cash on deposit that exceeds $250,000 in the financial institutions is financially sound and the risk of loss is minimal.

We have no significant off-balance sheet concentrations of credit risk such as foreign exchange contracts, options contracts or other foreign hedging arrangements. We maintain the majority of our cash balances with one financial institution in the form of demand deposits.

Accounts receivable are typically unsecured and are derived from transactions with and from entities in the healthcare industry primarily located in the United States. Accordingly, we may be exposed to credit risk generally associated with the healthcare industry. We maintain allowances for doubtful accounts for estimated losses resulting from the inability of our customers to make required payments. We charge interest on past due accounts on a case-by-case basis.

A summary of the activity in our allowance for doubtful accounts is as follows:

The net accounts receivable balance at March 31, 2015 of $965,355 included no more than 5% from any one customer. The net accounts receivable balance at March 31, 2014 of $863,220 included no more than 5% from any one customer.

Warranty Accrual.  We provide for the estimated cost of product warranties at the time sales are recognized. While we engage in extensive product quality programs and processes, including actively monitoring and evaluating the quality of our component suppliers, our warranty obligation is based upon historical experience and is also affected by product failure rates and material usage incurred in correcting a product failure. Should actual product failure rates or material usage costs differ from our estimates, revisions to the estimated warranty liability would be required. A summary of our warranty claims activity, included in other accrued liabilities, is as follows:

Inventories. Inventories are stated at the lower of cost (first-in, first-out basis) or market. We reduce inventory for estimated obsolete or unmarketable inventory equal to the difference between the cost of inventory and the estimated market value based upon assumptions about future

21

Table of Contents

demand and market conditions. If actual market conditions are less favorable than those projected by management, additional inventory write-downs may be required. At March 31, 2015 and 2014, inventory consisted of the following:

A summary of the activity in our inventory reserve for obsolescence is as follows:

Property and Equipment.  Property and equipment are stated at cost, with depreciation computed over the estimated useful lives of the assets, generally three to seven years. We use the straight-line method of depreciation for property and equipment. Leasehold improvements are depreciated over the shorter of the remaining lease term or the estimated useful life of the asset. Maintenance and repairs are expensed as incurred and major additions, replacements and improvements are capitalized. Equipment-in-progress is primarily manufacturing equipment for product that will be produced internally. Depreciation expense for the years ended March 31, 2015 and 2014 was $357,985 and $473,867, respectively.

Long-Lived Assets.  Long-lived assets are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. A long-lived asset is considered impaired when estimated future cash flows related to the asset, undiscounted and without interest, are insufficient to recover the carrying amount of the asset. If deemed impaired, the long-lived asset is reduced to its estimated fair value. Long-lived assets to be disposed of are reported at the lower of their carrying amount or estimated fair value less cost to sell. See Note 10.

Patents.  The costs of applying for patents are capitalized and amortized on a straight-line basis over the lesser of the patent’s economic or legal life (20 years from the date of application in the United States). Capitalized costs are expensed if patents are not issued. We review the carrying value of our patents periodically to determine whether the patents have continuing value and such reviews could result in the conclusion that the recorded amounts have been impaired. A summary of our patents at March 31, 2015 and 2014 is as follows:

The expected annual amortization expense related to patents and patent applications as of March 31, 2015, for the next five fiscal years, is as follows:

Other Accrued Liabilities. At March 31, 2015 and 2014, other accrued liabilities consisted of the following:

22

Table of Contents

Income Taxes.  We account for income taxes under the provisions of ASC Topic 740, “Accounting for Income Taxes” (“ASC 740”). ASC 740 requires recognition of deferred income tax assets and liabilities for the expected future income tax consequences, based on enacted tax laws, of temporary differences between the financial reporting and tax bases of assets and liabilities. ASC 740 also requires recognition of deferred tax assets for the expected future tax effects of all deductible temporary differences, loss carryforwards and tax credit carryforwards. Deferred tax assets are then reduced, if deemed necessary, by a valuation allowance for the amount of any tax benefits which, more likely than not based on current circumstances, are not expected to be realized. Should we achieve sufficient, sustained income in the future, we may conclude that some or all of the valuation allowance should be reversed (Note 5).

ASC 740 prescribes a comprehensive model for how companies should recognize, measure, present, and disclose in their financial statements uncertain tax positions taken or expected to be taken on a tax return. Under ASC 740, tax positions must initially be recognized in the financial statements when it is more likely than not the position will be sustained upon examination by the tax authorities. Such tax positions must initially and subsequently be measured as the largest amount of tax benefit that has a greater than 50% likelihood of being realized upon ultimate settlement with the tax authority assuming full knowledge of the position and relevant facts.

The cumulative effect of adopting ASC 740 on April 1, 2007 has been recorded net in deferred tax assets, which resulted in no ASC 740 liability on the balance sheet. The total amount of unrecognized tax benefits as of the date of adoption was zero. There are open statutes of limitations for taxing authorities in federal and state jurisdictions to audit the Company’s tax returns from fiscal year ended March 31, 1999 through the current period. Our policy is to account for income tax related interest and penalties in income tax expense in the statement of operations. There have been no income tax related interest or penalties assessed or recorded. Because the Company has provided a full valuation allowance on all of its deferred tax assets, the adoption of ASC 740 had no impact on our effective tax rate.

Sales Recognition.  Sales from product sales are recorded when we ship the product and title has passed to the customer, provided that we have evidence of a customer arrangement and can conclude that collection is probable. Our shipping policy is FOB Shipping Point. We recognize revenue from sales to stocking distributors when there is no right of return, other than for normal warranty claims. We have no ongoing obligations related to product sales, except for normal warranty. Revenue from engineering services is recognized when invoices are sent to customers and the service is performed.

Sales Taxes.  We collect sales tax from customers and remit the entire amount to each respective state. We recognize revenue from product sales net of sale taxes.

Research and Development Expenses.  We expense research and development costs for products and processes as incurred.

Advertising Costs.  We expense advertising costs as incurred. Advertising expense for the years ended March 31, 2015 and 2014 was minimal.

Medical Device Tax.  In March 2010, the Patient Protection and Affordable Care Act was enacted in the United States. This legislation includes a provision that imposes a 2.3% excise tax on the sale of certain medical devices by a manufacturer, producer or importer of such devices in the United States starting after December 31, 2012. We expense the medical device tax in Other Expense.

Stock-Based Compensation.  Stock-based compensation is presented in accordance with the guidance of ASC Topic 718, “Compensation — Stock Compensation” (“ASC 718”). Under the provisions of ASC 718, companies are required to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our statement of operations.

ASC 718 requires companies to estimate the fair value of share-based payment awards on the date of grant using an option-pricing model. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in the accompanying statement of operations.

Stock-based compensation expense recognized during the period is based on the value of the portion of share-based payment awards that is ultimately expected to vest during the period. Stock-based compensation expense recognized in our statement of operations for fiscal years 2015 and 2014 included compensation expense for share-based payment awards granted prior to, but not yet vested as of March 31, 2015, based on the grant date fair value. Compensation expense for all share-based payment is recognized using the straight-line, single-option method. As stock-based compensation expense recognized in the accompanying statement of operations for fiscal years 2015 and 2014 is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures. ASC 718 requires forfeitures to be estimated at the time of grant and revised, if necessary, in subsequent periods if actual forfeitures differ from those estimates.

We used the Black-Scholes option-pricing model (“Black-Scholes model”) to determine fair value. Our determination of fair value of share-based payment awards on the date of grant using an option-pricing model is affected by our stock price as well as assumptions regarding a number of highly complex and subjective variables. These variables include, but are not limited to our expected stock price volatility over the term of the awards, and actual and projected employee stock option exercise behaviors. Although the fair value of employee stock options is determined in accordance with ASC 718 using an option-pricing model, that value may not be indicative of the fair value observed in a willing buyer/willing seller market transaction.

Stock-based compensation expense recognized under ASC 718 for fiscal years 2015 and 2014 was $62,608 and $64,518, respectively, which consisted of stock-based compensation expense related to director and employee stock options.

Stock-based compensation expense related to employee stock options under ASC 718 for fiscal years 2015 and 2014 was allocated as follows:

23

Table of Contents

Segment Reporting.  We have concluded that we have one operating segment.

Basic and Diluted Income per Common Share.  Net income per share is calculated in accordance with ASC Topic 260, “Earnings Per Share” (“ASC 260”). Under the provisions of ASC 260, basic net income per common share is computed by dividing net income for the period by the weighted average number of common shares outstanding for the period. Diluted net income per common share is computed by dividing the net income for the period by the weighted average number of common and potential common shares outstanding during the period if the effect of the potential common shares is dilutive. Because we had a loss in fiscal years 2015 and 2014, the shares used in the calculation of dilutive potential common shares exclude options to purchase shares and RSUs. Therefore, basic net loss per common share equals dilutive net loss per common share:

The following table presents the calculation of basic and diluted net income (loss) per share:

Recent Accounting Pronouncements.  We have reviewed all recently issued, but not yet effective, accounting pronouncements. The Financial Accounting Standards Board issued Accounting Standards Update No. 2014-09 (Revenue from Contracts with Customers), which is effective for annual reporting periods beginning after December 15, 2016. We have not yet assessed the impact, if any, of adopting this standard. The Financial Accounting Standards Board has also issued Accounting Standards Update 2014-15, Presentation of Financial Statements — Going Concern (Subtopic 205-40): Disclosure of Uncertainties about an Entity’s Ability to Continue as a Going Concern (the ASU), which provides guidance on determining when and how to disclose going concern uncertainties in the financial statements. The ASU requires management to perform an assessment every reporting period (including interim periods) to determine whether there is substantial doubt about a company’s ability to continue as a going concern and to provide related footnote disclosures. The ASU also defines that substantial doubt exists when relevant conditions and events, considered in the aggregate, indicate that it is probable that the entity will be unable to meet its obligations as they become due within one year after the date that the financial statements are issued (or available to be issued). The ASU applies to all entities and is effective for annual periods ending after December 15, 2016, and interim periods thereafter, with early adoption permitted. We are currently evaluating this new guidance and the related impact on the financial statements.

3. Shareholders’ Equity

Stock Option Plans.  We have a stock option plan, the 2007 Stock Option Plan, and we adopted our 2014 Equity Incentive Plan (the “Plan,” as summarized below) to promote our and our shareholders’ interests by helping us to attract, retain and motivate our key employees and associates. Under the terms of the Plan, the Board of Directors may grant incentive and non-qualified stock options, stock appreciation rights, restricted stock, restricted stock units, performance units, and other stock-based awards. The purchase price of the shares subject to a stock option will be the fair market value of our common stock on the date the stock option is granted. Generally, vesting of stock options occurs such that 20% becomes exercisable on each anniversary of the date of grant for each of the five years following the grant date of such option. Generally, all stock options must be exercised within five years from the date granted. The number of common shares reserved for issuance under the Plan is 700,000 shares of common stock, subject to adjustment for dividend, stock split or other relevant changes in our capitalization.

Under ASC 718, the value of each employee stock option was estimated on the date of grant using the Black-Scholes model for the purpose of financial information in accordance with ASC 718. The use of a Black-Scholes model requires the use of actual employee exercise behavior data and the use of a number of assumptions including expected volatility, risk-free interest rate and expected dividends. Employee stock options for 95,000 and 405,000 shares of stock were granted during fiscal years 2015 and 2014, respectively. RSUs for 24,924 and no shares of stock were granted during fiscal years 2015 and 2014, respectively.

As of March 31, 2015, $266,000 of total unrecognized compensation costs related to nonvested stock is expected to be recognized over a period of five years. The assumptions for employee stock options are summarized as follows:

24

Table of Contents

Cumulative compensation cost recognized in net income or loss with respect to options that are forfeited prior to vesting is adjusted as a reduction of compensation expense in the period of forfeiture. The volatility of the stock is based on the historical volatility for the period that approximates the expected lives of the options being valued. Fair value computations are highly sensitive to the volatility factor; the greater the volatility, the higher the computed fair value of options granted.

The total fair value of options granted was computed to be approximately $51,000 and $275,000, for the fiscal years ended March 31, 2015 and 2014, respectively. For disclosure purposes, these amounts are amortized ratably over the vesting periods of the options. Effects of stock-based compensation, net of the effect of forfeitures, totaled $62,608 and $64,518 for fiscal years 2015 and 2014, respectively.

The Black-Scholes model was developed for use in estimating the fair value of traded options that have no vesting restrictions and are fully transferable. In addition, option valuation models require the use of assumptions, including the expected stock price volatility. Because our employee stock options have characteristics significantly different than those of traded options, and because changes in the subjective input assumptions can materially affect the fair value estimate, in management’s opinion, the existing models do not necessarily provide a reliable single measure of the fair value of our employee stock options. A summary of our stock option activity and related information for equity compensation plans approved by security holders for each of the fiscal years ended March 31, 2015 and 2014 is as follows:

A summary of our stock option activity and related information for equity compensation plans not approved by security holders for the fiscal year ended March 31, 2015 is as follows:

The following table summarizes information about employee stock options outstanding and exercisable at March 31, 2015:

A summary of our RSU activity and related information for equity compensation plans approved by security holders for the fiscal year ended March 31, 2015 is as follows:

25

Table of Contents

The 575,000 options outstanding as of March 31, 2015 are nonqualified stock options. The exercise price of all options granted through March 31, 2015 has been equal to or greater than the fair market value, as determined by our Board of Directors or based upon publicly quoted market values of our common stock on the date of the grant. As of March 31, 2015, 600,076 equity units for our common stock remain available for grant under the Plan.

4. Commitments and Contingencies

Effective December 1, 2013, we extended our noncancelable lease agreement through July 31, 2019 for 28,696 square feet of space for our facilities at 6797 Winchester Circle, Boulder, Colorado. The lease includes $172,176 of leasehold improvements granted by the landlord. The $172,176 was recorded on our balance sheets as leasehold improvements and deferred rent. The leasehold improvements are being amortized over the lesser of the lease term or the assets life and the deferred rent is being amortized against rent expense over the lease term. The minimum future lease payment, by fiscal year, as of March 31, 2015 is as follows:

We paid off our capital equipment lease with General Electric Capital Corporation and, at March 31, 2015, have no balance remaining.

Included in our furniture, fixtures and equipment balance is leased equipment that was acquired, under the provisions of a long-term capital lease, during the quarter ended June 30, 2013. The equipment had an original cost of $177,547 and has a net book value of $86,069 at March 31, 2015.

On May 29, 2015, we signed an amendment to our credit facility agreement with Silicon Valley Bank. The terms of the credit facility include a line of credit for $2,000,000 for one year, until May 29, 2016, at an interest rate calculated at the prime rate plus 1.25%, subject to increase upon a default. The liquidity ratio covenant limits our borrowing under the credit facility by a ratio of at least 2.0 to 1.0 of our eligible receivables plus cash, minus accounts payable that are over sixty days, at the time of borrowing. As of March 31, 2015, we had $64,000 of borrowings from the credit facility and, under our liquidity ratio limit, had an additional approximately $517,000 available to borrow. The credit facility is secured by all tangible and intangible assets, whether now owned or hereafter acquired, wherever located. Our credit facility is classified in the balance sheets as a long-term liability.

We are subject to regulation by the United States Food and Drug Administration (“FDA”). The FDA provides regulations governing the manufacture and sale of our products and regularly inspects us and other manufacturers to determine our and their compliance with these regulations. As of March 31, 2015, we believe we were in substantial compliance with all known regulations. FDA inspections are conducted periodically at the discretion of the FDA. We were last inspected in December 2012 and were notified of five observations from that inspection, none of which we believe to be material.

Our obligation with respect to employee severance benefits is minimized by the “at will” nature of the employee relationships. Our total obligation as of March 31, 2015 with respect to contingent severance benefit obligations was $87,282.

5. Income Taxes

We account for income taxes under ASC 740, which requires the use of the liability method. ASC 740 provides that deferred tax assets and liabilities are recorded based on the differences between the tax bases of assets and liabilities and their carrying amounts for financial reporting purposes, referred to as temporary differences. Deferred tax assets and liabilities at the end of each period are determined using the currently enacted tax rates applied to taxable income in the periods in which the deferred tax assets and liabilities are expected to be settled or realized.

Income tax provision (benefit) for income taxes is summarized below:

26

Table of Contents

The items accounting for the difference between income taxes computed at the federal statutory rate and the provision for income taxes consists of the following:

The components of the deferred tax asset are as follows:

We believe that based on all available evidence, it is more likely than not that the deferred tax assets will not be fully realized. Accordingly, a valuation allowance has been recorded against the deferred tax asset.

As of March 31, 2015, we had approximately $10.5 million of net operating loss carryovers for tax purposes. Additionally, we have approximately $214,000 of research and development tax credits available to offset future federal income taxes. The net operating loss and credit carryovers begin to expire in the fiscal year ended March 31, 2019. In fiscal years ended after March 31, 2019, net operating losses expire at various dates through March 31, 2035. Our net operating loss carryovers at March 31, 2015 include $582,000 in income tax deductions related to stock options which will be tax effected and the benefit will be reflected as a credit to additional paid-in capital when realized. As such, these deductions are not reflected in our deferred tax assets. The Internal Revenue Code contains provisions, which may limit the net operating loss carryforwards available to be used in any given year if certain events occur, including significant changes in ownership interests.

6. Legal Proceedings

We have been named as a defendant in 59 separate (but similar) product liability lawsuits relating to a surgical mesh product manufactured by another company. We did not distribute or sell the manufacturer’s mesh product, which is the subject of these lawsuits. We believe that we have been named as a defendant in these lawsuits only because we served as a distributor for other unrelated products of that manufacturer. We believe that we have meritorious defenses to these lawsuits. We believe that these lawsuits will be covered by our insurance policies.

Based on currently available information, we believe that the resolution of these lawsuits is not likely to have a material adverse effect on our business, financial position or future results of operations. In accordance with generally accepted accounting principles in the United States (U.S. GAAP), we record a liability when it is both probable that a liability has been incurred and the amount of the loss can be reasonably estimated. These provisions are reviewed at least quarterly and adjusted to reflect the impacts of negotiations, settlements, rulings, advice of legal counsel, and other information and events pertaining to a particular case.

7. Major Customers/Suppliers

We depend on sales that are generated from hospitals’ ongoing usage of AEM surgical instruments. In fiscal year 2015, we generated sales from over 350 hospitals that have changed to AEM products, but no hospital customer contributed more than 3% to the total sales. We have a relationship with New Deantronics, Inc., who accounted for approximately 11% of our purchases in fiscal year 2015

8. Defined Contribution Employee Benefit Plan

We have adopted a 401(k) Profit Sharing Plan which covers all full-time employees who have completed at least three months of full-time continuous service and are age eighteen or older. Participants may defer up to 20% of their gross pay up to a maximum limit determined by law. Participants are immediately vested in their contributions. We may make discretionary contributions based on corporate financial results for the fiscal year. To date, we have not made contributions to the 401(k) Profit Sharing Plan. Vesting in a contribution account (our contribution) is based on years of service, with a participant fully vested after five years of credited service.

9. Related Party Transaction

We paid consulting fees of $84,733 and $92,308 to an entity owned by one of our directors in fiscal years 2015 and 2014, respectively. We paid consulting fees of $4,000 and $89,519 to an entity owned by another director, in fiscal years 2015 and 2014, respectively.

10. Impairment Cost

After assessing poor performance of our pistol-grip disposable suction irrigation electrode and our cold scissors, we decided to discontinue future sales of these instruments. As a result, we incurred a product impairment cost of $1,100,368 in our fourth quarter that ended March 31, 2014, for

27

Table of Contents

inventory and equipment of these instruments and for other inventory that we will not use in the future. Impairment of furniture, fixtures and equipment was $643,867 and impairment of inventory was $456,501.

11. Subsequent Events

Management evaluated all activity of us and concluded that, except for the events that follows, no subsequent events have occurred that would require recognition in the financial statements or disclosure in the notes to the financial statements.

On May 29, 2015, we signed an amendment to our credit facility agreement with Silicon Valley Bank. The terms of the credit facility include a line of credit for $2,000,000 for one year, until May 29, 2016, at an interest rate calculated at the prime rate plus 1.25%, subject to increase upon a default. The liquidity ratio covenant of the agreement limits our borrowing under the credit facility by a ratio of at least 2.0 to 1.0 of our eligible receivables plus cash, minus accounts payable that are over sixty days, at the time of borrowing. As of March 31, 2015, we had $64,000 of borrowings from the credit facility and, under our liquidity ratio limit, had an additional approximately $517,000 available to borrow. The credit facility is secured by all tangible and intangible assets, whether now owned or hereafter acquired, wherever located. Our credit facility is classified in the balance sheets as a long-term liability.

28

Table of Contents

Item 9                      Changes In and Disagreements with Accountants on Accounting and Financial Disclosure.

None

Item 9 A (T).  Controls and Procedures.

We carried out an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer and Principal Accounting Officer, of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934 (the “Exchange Act”)) as of the end of the period covered by this report. Based upon that evaluation, the Chief Executive Officer and the Principal Accounting Officer concluded that our disclosure controls and procedures were effective as of March 31, 2015.

Management’s Annual Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in Rules 13a-15(f) and 15d-15(f) of the Exchange Act. Our internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. Our internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of our assets; (ii) provide reasonable assurance that transactions are recorded to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the Company are made only in accordance with authorizations of our management and directors; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of our assets that could have a material effect on our financial statements.

Management assessed the effectiveness of our internal control over financial reporting as of March 31, 2015. In making this assessment, management used the criteria set forth in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in 2013.

Based on its assessment of internal control over financial reporting, management has concluded that, as of March 31, 2015, our internal control over financial reporting was effective.

This Annual Report does not include an attestation report of the Company’s registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by the Company’s registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit the Company to provide only management’s report in this Annual Report.

Changes In Internal Control Over Financial Reporting

There were no significant changes in our internal control over financial reporting during the three months ended March 31, 2015 that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Item 9 B.       Other Information

None

29

Table of Contents

PART III

Item 10.            Directors, Executive Officers and Corporate Governance.

Information in response to this item is incorporated by reference from the registrant’s definitive proxy statement for its 2015 Annual Meeting of Shareholders to be filed within 120 days after March 31, 2015.

Item 11.            Executive Compensation.

Information in response to this item is incorporated by reference from the registrant’s definitive proxy statement for its 2015 Annual Meeting of Shareholders to be filed within 120 days after March 31, 2015.

Item 12.            Security Ownership of Certain Beneficial Owners and Management and Related Shareholder Matters.