Attached files

file filename
EXCEL - IDEA: XBRL DOCUMENT - Novus Robotics Inc.Financial_Report.xls
EX-31.1 - CERTIFICATION - Novus Robotics Inc.nrbt_ex311.htm
EX-32.1 - CERTIFICATION - Novus Robotics Inc.nrbt_ex321.htm


U.S. SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
 
Form 10-Q
 
Mark One
x
QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIESEXCHANGE ACT OF 1934
 
For the period ended September 30, 2013
 
o
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGEACT OF 1934
 
For the transition period from __________ to _________
 
Commission File No. 000-53006
 
Novus Robotics Inc.
(Name of small business issuer in its charter)
 
Nevada
 
20-3061959
(State or other jurisdiction of incorporation or organization)
 
(I.R.S. Employer Identification No.)
 
7669 Kimbal Street
Mississauga, Ontario
Canada L5S 1A7
(Address of principal executive offices)
 
(905) 672-7669
(Issuer’s telephone number)

N/A
 (Former name, former address and former fiscal year, if changes since last report)
 
Securities registered pursuant to Section 12(b) of the Act:
 
Name of each exchange on which registered:
None
   
 
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, $0.001
(Title of Class)
 
Indicate by checkmark whether the issuer: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the past 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes  x No  o
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (Section 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files.  Yes  o No  x
 
Indicate by check mark whether the registrant is a large accelerated filed, an accelerated filer, a non-accelerated filer, or a smaller reporting company.
 
Large accelerated filer
o
Accelerated filer
o
Non-accelerated filer
o
Smaller reporting company
x
 
Indicate by checkmark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). Yes  o No  x
 
Applicable Only to Issuer Involved in Bankruptcy Proceedings During the Preceding Five Years.
 
N/A
 
Indicate by checkmark whether the issuer has filed all documents and reports required to be filed by Section 12, 13 and 15(d) of the Securities Exchange Act of 1934 after the distribution of securities under a plan confirmed by a court.  Yes  o No  o
 
Applicable Only to Corporate Registrants
 
Indicate the number of shares outstanding of each of the issuer’s classes of common stock, as of the most practicable date:
 
Class
Outstanding as of  November 12, 2013
Common Stock, $0.001
88,650,000
 


 
 

 
NOVUS ROBOTICS INC.

Form 10-Q
 
Part 1. FINANCIAL INFORMATION

Item 1.
Financial Statements (unaudited)
   
3
 
 
Balance Sheets
   
4
 
 
Statements of Operations
   
5
 
 
Statements of Cash Flows
   
6
 
 
Notes to Financial Statements
   
7
 
           
Item 2.
Management’s Discussion and Analysis of Financial Condition and Results of Operations
   
13
 
 
         
Item 3.
Quantitative and Qualitative Disclosures About Market Risk
   
24
 
 
         
Item 4.
Controls and Procedures
   
25
 
 
Part II. OTHER INFORMATION
 
Item 1.
Legal Proceedings
   
27
 
 
         
Item 1A.
Risk Factors
   
27
 
           
Item 2.
Unregistered Sales of Equity Securities and Use of Proceeds
   
27
 
           
Item 3.
Defaults Upon Senior Securities
   
27
 
 
         
Item 4.
Mine Safety Disclosures
   
27
 
           
Item 5.
Other Information
   
28
 
 
         
Item 6.
Exhibits
   
29
 
 
 
2

 
 
PART I

ITEM 1.   FINANCIAL STATEMENTS
 
 
NOVUS ROBOTICS INC.
CONSOLIDATED FINANCIAL STATEMENTS

SEPTEMBER 30, 2013
(Unaudited)
 
 
 
3

 
 
NOVUS ROBOTICS INC.
Consolidated Balance Sheets
(Unaudited) 

 
   
September 30,
   
December 31,
 
   
2013
   
2012
 
ASSETS
Current assets:
           
Cash
  $ 1,063,761     $ 921,332  
Accounts receivable
    251,623       430,210  
Inventory
    649,654       65,119  
Taxes recoverable
    -       25,530  
Security deposits
    14,667       15,160  
Prepaid expense
    241       1,822  
Total current assets
    1,979,946       1,459,173  
                 
Fixed assets, net
    229,423       170,938  
Total assets
  $ 2,209,369     $ 1,630,111  
                 
LIABILITIES AND STOCKHOLDERS' EQUITY
LIABILITIES
               
Current liabilities:
               
Accounts payable and accrued expenses
  $ 258,398     $ 396,152  
Convertible notes payable
    185,600       12,824  
Deferred revenue
    674,935       54,692  
Warranty provision
    16,988       90,350  
Taxes payable
    14,126       185,600  
Total current liabilities
    1,150,047       739,618  
Total liabilities
    1,150,047       739,618  
                 
STOCKHOLDERS' EQUITY
               
Preferred stock:
               
500,000,000 shares authorized at $0.001 par value, 0 issued and outstanding          
Series A - 100 designated, none issued and outstanding
    -       -  
Series B- 49,999,900 designated, none outstanding
    -       -  
Common stock:
               
500,000,000 shares authorized at $0.001 par value 88,650,000 issued and outstanding
    88,650       88,650  
Accumulated other comprehensive income
    67,130       89,912  
Retained earnings
    903,542       711,931  
Total liabilities and stockholders' equity
  $ 2,209,369     $ 1,630,111  
 
The accompanying notes are an integral part of these consolidated interim financial statements.
 
 
4

 

NOVUS ROBOTICS INC.
Consolidated Statements of Operations and Comprehensive Income (Loss)
(Unaudited) 

 
   
For the three months ended,
September 30,
   
For the nine months ended,
September 30,
 
   
2013
   
2012
   
2013
   
2012
 
                         
Revenue
  $ 57,019     $ 590,502     $ 1,562,971     $ 2,942,306  
Cost of sales
    44,762       166,206       905,836       1,292,346  
Gross profit
    12,257       424,296       657,135       1,649,960  
                                 
Operating (gains) expenses:
                               
Compensation
    67,508       336,091       375,818       984,228  
Bonuses forgiven
    -       -       (200,000 )     -  
Occupancy costs
    54,431       21,425       96,640       63,999  
Travel
    4,921       32,389       52,361       73,734  
Professional fees
    12,456       17,037       98,025       75,930  
Communication
    4,883       8,157       13,803       18,281  
Office and general
    7,704       13,218       33,009       47,135  
Foreign exchange (gain) loss
    (26,943 )     5,246       (56,018 )     4,833  
Total operating expenses
    124,960       433,563       413,638       1,268,140  
                                 
Income (loss) from operations
    (112,703 )     (9,267 )     243,497       381,820  
                                 
Other expenses:
                               
Interest expense
    3,711       -       11,135       -  
                                 
Income tax expense (benefit)
    (72,420 )     75,114       40,752       126,115  
                                 
Net income (loss)
  $ (43,994 )   $ (84,381 )   $ 191,610     $ 255,705  
                                 
Other comprehensive income (loss)
                               
Foreign exchange adjustment
    (17,737 )     -       (22,782 )     (31,628 )
                                 
Comprehensive income (loss)
  $ (61,731 )   $ (84,381 )   $ 168,828     $ 224,077  
                                 
Basic income per share
  $ (0.00 )   $ (0.00 )   $ 0.00     $ 0.00  
Diluted income per share
  $ (0.00 )   $ (0.00 )   $ 0.00     $ 0.00  
                                 
Weighted average number of shares outstanding - basic
    88,650,000       88,650,000       88,650,000       88,650,000  
Weighted average number of shares outstanding - diluted
    125,770,000       125,770,000       125,770,000       125,770,000  
 
The accompanying notes are an integral part of these consolidated interim financial statements.
 
 
5

 
 
NOVUS ROBOTICS INC.
Consolidated Statements of Cash Flows
(Unaudited) 

 
   
For the nine months ended
 
   
September 30,
 
   
2013
   
2012
 
             
Cash flow from operating activities:
           
Net income
  $ 191,610     $ 255,705  
Adjustments to reconcile net income to net cash provided by (used in) operating activities:
         
Bonus forgiven
    (200,000 )     -  
Depreciation
    33,133       18,135  
                 
Changes in operating assets and liabilities:
               
Accounts receivable
    178,587       52,625  
Inventory
    (584,535 )     607,433  
Prepaid expenses
    1,581       1,005  
Security deposit
    493       (389 )
Accounts payable and accrued expenses
    62,246       (145,646 )
Deferred revenue
    662,111       (1,047,665 )
Warranty provision
    (37,704 )     (32,220 )
Taxes recoverable/payable
    (50,694 )     153,489  
Net cash provided by (used in) operating activities
    256,829       (137,528 )
                 
Cash flow form investing activities:
               
Purchase of fixed assets
    (91,618 )     -  
Cash received as result of reverse merger transaction
    -       2,849  
Net cash provided by (used in) investing activities
    (91,618 )     2,849  
                 
Cash flow from financing activities:
               
Advance from shareholder
    -       490,650  
Repayment to shareholder
    -       (185,728 )
Net cash provided by financing activities
    -       304,922  
                 
Effect of foreign exchange rate on changes in cash
    (22,782 )     (31,628 )
                 
Increase in cash
    142,429       138,615  
                 
Cash, beginning of period
    921,332       969,502  
                 
Cash, end of period
  $ 1,063,761     $ 1,108,117  
                 
Non-cash investing and financing activities:
               
Receivable (received as result of reverse merger transaction)
  $ -     $ (12 )
Inventory (received as result of reverse merger transaction)
  $ -     $ (194 )
Accounts payable (received as result of reverse merger transaction)
  $ -     $ (6,254 )
Notes payable (received as result of reverse merger transaction)
  $ -     $ 130,000  

The accompanying notes are an integral part of these consolidated interim financial statements.
 
 
6

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
1.
BASIS OF PRESENTATION AND CONTINUITY

Novus Robotics Inc. (“Novus” or “the Company”) , formerly known as Ecoland International Inc. (“Ecoland”), a Nevada corporation, was incorporated on June 24, 2005 under the name Guano Distributors, Inc. for the purpose of selling Dry-Bar Cave bat guano.  On June 28, 2006, the articles of incorporation were amended to change its name to Ecoland.   On March 13, 2012, the articles of incorporation were amended to change the Company’s name to Novus.

Pursuant to a share exchange agreement between Novus and D&R Technologies Inc. (“D&R”), incorporated under the laws of the Province of Ontario on June 16, 2004, the Company issued 59,000,000 common shares to the shareholders of D&R in exchange for 100% of their issued and outstanding common shares thereby making D&R its wholly-owned subsidiary.  The acquisition has been treated as a recapitalization of Novus with D&R as the accounting acquirer in accordance with the Reverse Merger rules.

D&R`s principle business activity is the engineering, design and the manufacturing of automated tube processing solutions for the automotive industry.

2.
REVERSE MERGER TRANSACTION

Pursuant to the terms of an acquisition agreement between Ecoland and D&R dated January 27, 2012, the Company completed a reverse merger and recapitalization with D&R such that D&R became a wholly owned subsidiary of Novus and the shareholders of D&R acquired a majority of the common shares of Novus. D&R, the legal subsidiary, is considered to have acquired the assets and liabilities of Ecoland (now Novus), the legal parent. Immediately prior to the completion of the transaction, Ecoland had 88,650,000 common shares issued and outstanding.

Based on the balance sheet of Ecoland prepared in connection with the transaction, the net assets acquired by D&R were as follows:

Current assets
  $ 3,055  
Current liabilities
    (191,855 )
Working capital deficit
  $ 188,800  

As a consequence of the transaction, the Company received cash of $2,848, other assets of $206 and assumed liabilities of $191,855.

For accounting purposes, the acquisition has been treated as a reverse merger and recapitalization of D&R with D&R as the acquirer, in essence, a recapitalization of Novus Robotics Inc. (fka Ecoland International, Inc.). As such, the historical deficit of Ecoland, $1,053,361, was eliminated along with its additional paid in capital account by charging these amounts to retained earnings.
 
3.
SIGNIFICANT ACCOUNTING POLICIES

Basis of presentation

These consolidated financial statements and related notes are presented in accordance with accounting principles generally accepted in the United States and are expressed in US dollars.  D&R’s functional currency is the Canadian Dollar.
 
 
7

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
3.
SIGNIFICANT ACCOUNTING POLICIES – continued
 
In the opinion of management, all adjustments (consisting of normal recurring accruals) considered necessary for a fair statement of results in accordance with US GAAP have been included and properly prepared within reasonable limits of materiality and within the framework of the significant accounting policies summarized below:

Principles of Consolidation

The consolidated financial statements include the accounts and operations of Novus and its wholly owned subsidiaries D&R Technologies Inc and D&R Tools Inc. All inter-company accounts and transactions have been eliminated on consolidation.

Uses of Estimates

The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period.  Financial statement items subject to significant judgment include expense accruals, as well as income taxes and loss contingencies.  Actual results could differ from those estimates.

The areas which require management to make significant judgments, estimates and assumptions in determining carrying values include, but are not limited to:

Assets’ carrying values and impairment charges 

Assets, including property and equipment and inventory, are reviewed for impairment whenever events or changes in circumstances indicate that their carrying amount exceed their recoverable amounts.  In the determination of carrying values and impairment charges, management looks at the higher of recoverable amount or fair value less costs to sell in the case of assets and at objective evidence, significant or prolonged decline of fair value on financial assets indicating impairment. These determinations and their individual assumptions require that management make a decision based on the best available information at each reporting period.

Income taxes and recoverability of potential deferred tax assets 

In assessing the probability of realizing income tax assets recognized, management makes estimates related to expectations of future taxable income, applicable tax planning opportunities, expected timing of reversals of existing temporary differences and the likelihood that tax positions taken will be sustained upon examination by applicable tax authorities. In making its assessments, management gives additional weight to positive and negative evidence that can be objectively verified. Estimates of future taxable income are based on forecasted cash flows from operations and the application of existing tax laws in each jurisdiction. The Company considers whether relevant tax planning opportunities are within the Company’s control, are feasible, and are within management’s ability to implement. Examination by applicable tax authorities is supported based on individual facts and circumstances of the relevant tax position examined in light of all available evidence. Where applicable tax laws and regulations are either unclear or subject to ongoing varying interpretations, it is reasonably possible that changes in these estimates can occur that materially affect the amounts of income tax assets recognized. Also, future changes in tax laws could limit the Company from realizing the tax benefits from the deferred tax assets. The Company reassesses unrecognized income tax assets at each reporting period.
 
 
8

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
3.
SIGNIFICANT ACCOUNTING POLICIES – continued
 
Long-lived Assets

In accordance with the Financial Accounting Standards Board ("FASB") SFAS No. 144, "Property, Plant and Equipment" the carrying value of intangible assets and other long-lived assets is reviewed on a regular basis for the existence of facts or circumstances that may suggest impairment.  The Company recognizes impairment when the sum of the expected undiscounted future cash flows is less than the carrying amount of the asset.  Impairment losses, if any, are measured as the excess of the carrying amount of the asset over its estimated fair value.

Regulatory Matters

The Company is subject to a variety of federal, provincial and state regulations governing land use, health, safety and environmental matters.  The Company’s management believes it has been in substantial compliance with all such regulations.

Cash and Cash Equivalents

The Company considers all highly liquid instruments with maturities of three months or less at the time of issuance to be cash equivalents.  At September 30, 2013, the Company had no cash equivalents.  The Company maintains its cash in bank deposit accounts which may exceed federally insured limits.  As of September 30, 2013, the Company’s accounts are insured for $100,000 CDN by Canadian Deposit Insurance Corporation for Canadian bank deposits and are fully insured by FDIC for US bank deposits.  At September 30, 2013, the Company’s Canadian deposits are $20,644 CDN in excess of the insured amount; the entirety of the Company’s US deposits are insured.

Inventory

Inventory, comprised principally of raw materials, is stated at the lower of cost or market using the first-in, first-out (“FIFO”) method. This policy requires D&R to make estimates regarding the market value of our inventory, including an assessment of excess or obsolete inventory. The Company determines excess and obsolete inventory based on an estimate of the future demand and estimated selling prices for its products.

Fixed Assets

Fixed assets are stated at cost.  Depreciation is recorded on a straight line basis reflective of the useful lives of the assets.  Expenditures for maintenance and repairs are charged to operations when incurred, while additions and betterments are capitalized. When assets are retired or disposed, the asset’s original cost and related accumulated depreciation are eliminated from accounts and any gain or loss is reflected in income.

   
Estimated useful
life (years)
 
Office equipment
  5  
Computer equipment
  5  
Shop and machinery equipment
  7 - 10  
 
 
9

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
3.
SIGNIFICANT ACCOUNTING POLICIES – continued
 
Foreign Currency Translation

Gains and losses arising upon settlement of foreign currency denominated transactions or balances are included in the determination of income.  The Company’s functional currency is the U.S. dollar.  Transactions in foreign currency are translated into U.S. dollars in accordance with the ASC 830-30 as follows:

i.     monetary items at the rate prevailing at the balance sheet date;
ii.    non-monetary items at the historical exchange rate;
iii.   revenue and expenses at the average rate in effect during the applicable accounting period.

Translation adjustments are included in accumulated other comprehensive income (loss), a separate component of stockholders deficiency.

Financial Instruments

The carrying values of the Company’s financial instruments, which comprise cash, accounts receivable, accounts payable, payroll liabilities, loan payable, taxes payable and due to officers/shareholders, approximate their fair values due to the immediate or short-term maturity of these instruments.  Currently, the Company does not use derivative instruments to reduce its exposure to foreign currency risk.

Fair Value Measurements

The authoritative guidance for fair values establishes a three tier fair value hierarchy, which prioritizes the inputs used in measuring fair value. Level 1, defined as observable inputs such as quoted prices in active markets; Level 2, defined as inputs other than quoted prices in active markets that are either directly or indirectly observable; and Level 3, defined as unobservable inputs in which little or no market data exists, therefore requiring an entity to develop its own assumptions.

Income Taxes

Potential benefits of income tax losses are not recognized in the accounts until realization is more likely than not.   The Company has adopted ASC 740, "Accounting for Income Taxes," as of its inception.  Pursuant to ASC 70, the Company is required to compute tax asset benefits for net operating losses carried forward.  The potential benefits of net operating losses have not been recognized in these financial statements because the Company cannot be assured it is more likely than not it will be able to utilize the net operating losses carried forward in future years.

Advertising Costs

Advertising costs are expensed as incurred.  No advertising costs have been incurred by the Company to date.

Revenue Recognition

The Company recognizes revenue in accordance with Securities and Exchange Commission (“SEC”) Staff Accounting Bulletin No. 101,"Revenue Recognition in Financial Statements" ("SAB 101") as modified by SEC Staff Accounting Bulletin No.104. Under SAB 101, revenue is recognized when the associated project is completed, and when collection of the resulting receivable is reasonably assured.

D&R provides standard warranties for its product from the date of shipment. Estimated warranty obligations are recorded at the time of sale.

 
10

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
3.
SIGNIFICANT ACCOUNTING POLICIES – continued
 
Earnings per Common Share

Net income per share is provided in accordance with ASC 260-10, “Earnings per Share”.  We present basic income per share (“EPS”) and diluted EPS the face of the statement of operations. Basic EPS is computed by dividing reported net income (loss) applicable to common shareholders by the weighted average number of common shares outstanding during the period.  Except where the result would be anti-diluted to income from continuing operations, diluted earnings per share would be computed assuming the conversion of the convertible long-term debt and the elimination of the related interest expense, and the exercise of stock warrants.  Income per common share has been computed using the weighted average number of common shares outstanding during the year.  For the period ended September 30, 2013, the Company does not have equity instruments outstanding which would determine diluted income per share.

Comprehensive Income

The Company has adopted ASC 220, "Comprehensive Income," which establishes standards for reporting and the display of comprehensive income, its components and accumulated balances.  Comprehensive income (loss) is defined to include all changes in equity except those resulting from investments by owners or distributions to owners.  Among other disclosures, ASC 220 requires that all items that are required to be recognized under the current accounting standards as a component of comprehensive income be reported in a financial statement that is displayed with the same prominence as other financial statements.  Comprehensive income (loss) is displayed in the statement of shareholders' equity and in the balance sheet as a component of shareholders' equity.

Recent Accounting Pronouncements
 
There have been no recent accounting pronouncements or changes in accounting pronouncements that impacted the first quarter of fiscal year 2013, or which are expected to impact future periods, that were not already adopted and disclosed in prior periods.
 
4.
DUE TO SHAREHOLDERS/OFFICERS
 
During the first quarter of 2012, a shareholder of D&R loaned the Company $500,000 to assist with working capital requirements.  The loan is unsecured, non-interest bearing with no fixed terms of repayment and was fully repaid by December 31, 2012.
 
5.
CONVERTIBLE NOTES PAYABLE
 
Due to the reverse merger referenced in note 2, on January 27, 2012, the Company assumed convertible notes payable and accrued interest totaling $185,600. This total relates to three separate convertible notes payable to unrelated parties. The convertible notes are unsecured, due on demand, accrue interest at the rate of 8.0% per annum, and are convertible into shares of our restricted common stock at the rate of $0.005 per share. The convertible notes were assigned to Bernardino Paolucci on January 2, 2013.

 
11

 
 
NOVUS ROBOTICS INC.
Notes to Consolidated Financial Statements
September 30, 2013

 
6.
COMMON STOCK TRANSACTION
 
On February 1, 2012, Novus issued 59,000,000 common shares to the owners of D&R and cancelled 59,000,000 common shares held by the former owners of Ecoland, pursuant to the reverse merger transaction discussed in 2. Pursuant to the terms of an acquisition agreement between Ecoland and D&R dated January 27, 2012, the Company completed a reverse merger and recapitalization with D&R such that D&R became a wholly owned subsidiary of Novus and the shareholders of D&R acquired a majority of the common shares of Novus. D&R, the legal subsidiary, is considered to have acquired the assets and liabilities of Ecoland (now Novus), the legal parent. Immediate prior to the completion of the transaction, Ecoland had effectively 29,650,000 common shares issued and outstanding net of the 59,000,000 canceled.
 
7.
CONCENTRATIONS

The Company has significant economic and commercial dependence on Johnson Controls, Inc. (“JCI”).  As a result, D&R is subject to significant financial risk in the event of financial distress of JCI.  For the quarter ended September 30, 2013 and year ended December 31, 2012 more than 70% of all sales and receivables were to this entity.  For the quarter ended September 30, 2012 more than 90% of all sales and receivables were to this entity.  For the nine months ended September 30, 2013 and 2012 70% and 90% of all sales and receivables were to this entity, respectively.
 
8.
LEASES AND OTHER COMMITMENTS

The Company leases premises totaling 18,000 square feet with monthly lease payments of approximately $8,400 per month expiring on July 31, 2016.

As at September 30, 2013, the aggregate minimum annual lease payments under operating leases were as follows:
 
2013
  $ 25,200  
2014
  $ 100,800  
2015
  $ 100,800  
2016
  $ 58,800  
2017
  $ -  

 
12

 
 
FORWARD LOOKING STATEMENTS

Statements made in this Form 10-Q that are not historical or current facts are "forward-looking statements" made pursuant to the safe harbor provisions of Section 27A of the Securities Act of 1933 (the "Act") and Section 21E of the Securities Exchange Act of 1934. These statements often can be identified by the use of terms such as "may," "will," "expect," "believe," "anticipate," "estimate," "approximate" or "continue," or the negative thereof. We intend that such forward-looking statements be subject to the safe harbors for such statements. We wish to caution readers not to place undue reliance on any such forward-looking statements, which speak only as of the date made. Any forward-looking statements represent management's best judgment as to what may occur in the future. However, forward-looking statements are subject to risks, uncertainties and important factors beyond our control that could cause actual results and events to differ materially from historical results of operations and events and those presently anticipated or projected. We disclaim any obligation subsequently to revise any forward-looking statements to reflect events or circumstances after the date of such statement or to reflect the occurrence of anticipated or unanticipated events.

ITEM 2.   MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

GENERAL

We were formed in the State of Nevada on June 24, 2005 under the name Guano Distributors, Inc. Prior to our incorporation, on April 15, 2005, David Wallace, our then-chief executive officer, chief financial officer and sole director, formed Guano Distributors (Pty) Ltd., a South African registered company, for the purpose of selling Dry-Bar Cave bat guano. On May 15, 2005, Mr. Wallace transferred all of his ownership interest in Guano Distributors (Pty) Ltd. to us. On June 28, 2006, we amended our Articles of Incorporation to change our name to Ecoland International, Inc.

Share Exchange Agreement

Ecoland International, Inc., now known as Novus Robotics Inc., D&R Technology Inc., a private corporation (“D&R Technology”) and, Beradino Paolucci and Drakso Karanovic, the shareholders of D&R Technology Inc. (the “D&R Shareholders”) entered into that certain share exchange agreement dated January 27, 2012 (the “Share Exchange Agreement”). Our Board of Directors approved the execution and consummation of the transaction under the Share Exchange Agreement on February 1, 2012.  In accordance with the terms and provisions of the Share Exchange Agreement, we issued an aggregate of 59,000,000 shares of our restricted common stock to the D&R Shareholders (which consisted of Messrs. Paolucci and Karanovic and D Mecatronics, which is holding the shares for the benefit of the remaining shareholders of D&R Technology) in exchange for 100% of the total issued and outstanding shares of D&R Technology, thus making D&R Technology its wholly-owned subsidiary. Our Board of Directors deemed it in the best interests of our shareholders to enter into the Share Exchange Agreement pursuant to which it would acquire all the technology and assets and assume all liabilities of D&R Technology. This resulted in a change in control and our overall business operations thus bringing potential value to our shareholders. D&R Technology was previously the wholly-owned subsidiary of D Mecatronics Inc., a Delaware corporation. On approximately November 10, 2011, D Mecatronics spun-off D&R Technology. D&R Technology subsequently issued shares of its restricted common stock to the shareholders of D Mecatronics on a pro-rata basis in accordance with their respective equity holdings in D Mecatronics. The equity percentages regarding the issuance of shares by D&R Technology were 48% to Berardino Paolucci, 24% to Drasko Karanovic and 28% to various shareholders (which shares were previously held by D Mecatronics on behalf of these shareholders).
 
 
13

 
 
Escrow Agreement
 
On June 4, 2013, our Board of Directors authorized the execution of that certain escrow agreement dated June 4, 2013 (the "Escrow Agreement") with Manhattan Transfer Registrar Co., our transfer agent ("Manhattan Transfer").
 
As disclosed in previous filings with the Securities and Exchange Commission, on approximately November 10, 2011, D Mecatronics Inc. ("D Mecatronics") spun-off our wholly-owned subsidiary, D&R Technology. D&R Technology subsequently issued shares of its restricted common stock to the shareholders of D Mecatronics on a pro-rata basis in accordance with their respective equity holdings in D Mecatronics. The equity percentages regarding the issuance of shares by D&R Technology were 48% to Berardino Paolucci, 24% to Drasko Karanovic and 28% to various shareholders (which shares were being held by D Mecatronics on behalf of these shareholders).  The transfer agent for D Mecatronics at the time of the spin-off was Global Sentry Equity Transfer Inc. ("Global Sentry"). At the time of the spin-off, management of D Mecatronics had attempted on several occasions to contact Global Sentry with regards to its shareholder list and records. However, any and all attempts were to no avail.  To date, D Mecatronics has not been able to obtain any of its records, including a shareholders list, from Global Sentry. Management has no knowledge or information as to the whereabouts of Global Sentry or its management nor of the location of its records and shareholders list. This has impeded the issuance of the shares of D&R Technology to the appropriate 28% minority shareholders of D Mecatronics and thus the reason why D Mecatronics was holding the shares in trust for the benefit of its shareholders.
 
Subsequently, we entered into the Share Exchange Agreement. Our Board of Directors had approved the execution and consummation of the transaction under the Share Exchange Agreement on February 1, 2012.  In accordance with the terms and provisions of the Share Exchange Agreement, we issued an aggregate of 59,000,000 shares of our restricted common stock to the D&R Shareholders (which consisted of Messrs. Paolucci and Karanovic and D Mecatronics, which held the shares for the benefit of the remaining shareholders of D&R Technology) in exchange for 100% of the total issued and outstanding shares of D&R Technology, thus making D&R Technology our wholly-owned subsidiary. The Board of Directors deemed it in the best interests of the shareholders to enter into the Share Exchange Agreement pursuant to which it would acquire all the technology and assets and assume all liabilities of D&R Technology.
 
The majority shareholders of D&R Technology approved the Share Exchange Agreement as did its Board of Directors. The Board of Directors of D&R Technology resolved in its board resolutions to issue to D Mecatronics the 16,520,000 shares to be issued to the missing 28% minority shareholders of D&R Technology (who are also the unknown shareholders of D Mecatronics). Therefore, D Mecatronics held in trust and for the benefit of its unknown shareholders (and as shareholders of D&R Technology) the shares to be issued to them by the Company. D Mecatronics is in the process of attempting to locate the transfer agent in order to obtain its records.
 
We are also in the process of locating the missing shareholders of D Mecatronics (and also as shareholders of D&R Technology) to whom our shares should be issued in accordance with the terms and provisions of the Share Exchange Agreement. Therefore, we entered into the Escrow Agreement. In accordance with the terms and provisions of the Escrow Agreement, D Mecatronics returned to Manhattan Transfer the share certificate evidencing the shares of our common stock issued to it as trustee. A new share certificate was issued to Manhattan Transfer as trustee in the aggregate denomination of 16,520,000 shares to be held in escrow. Manhattan Transfer and the Company is using its best efforts to create a shareholders list (the "Shareholders List") indicating each record owner of the shares and Manhattan Transfer shall release the shares to each of the person indicated on the Shareholders List when Manhattan Transfer is satisfied that the Shareholder List contains the information it needs to issue the shares to our respective individual shareholders.
 
We have placed on our website www.novusrobotics.com under "Investor Relations" contact information to be used by persons/entities that believe they were shareholders of D Mecatronics. Such individuals/entities should contact our management.
 
Please note that throughout this Quarterly Report, and unless otherwise noted, the words "we," "our," "us," the "Company," or "Novus Robotics," refers to Novus Robotics Inc.
 
 
14

 
 
CURRENT BUSINESS OPERATIONS

We are involved in the area of engineering, design and manufacture of robotics and automation technology solutions  for tube bending machine, which management believes will enable us to become a recognized technology pioneer and market leader in the area of engineering. Through our wholly-owned subsidiary, D&R Technology, we will provide state of the art automation technologies through our automated tube bending machines which we design, engineer and build for the automotive industry to solve its customers’ complex automation needs, increase efficiencies and improve manufacturing processes. Serving as a comprehensive engineering partner, we work with other leading robotic manufacturers to provide the best automation technologies. We provide automation solutions to a wide spectrum of customers and industries ranging from large Fortune 500 companies to small privately-held businesses. Our automated solutions can be found in manufacturing, assembly and processing lines throughout the United States, Canada, Mexico and South America. D&R Technology, has served the automotive industry for more than seven years and is currently applying its service solutions to other markets, such as medical robotics, personal robotic devices and water treatment industry. Management believes that increasing use of robotics in sectors such as food handling and processing, clean technology and energy, as well as pharmaceutical and general consumer goods production, will lead to increased demand for company’s products as manufacturers look to improve the speed, quality and reliability of production through automation. As of the date of this Quarterly Report, we have not generated any revenue from the medical robotics, personal robotic devices, water treatment industry, food handling and processing, clean technology and energy or pharmaceutical and general consumer goods production.

We are involved in the area of engineering, design and the manufacturing of automated solutions through our automated tube bending machines for the automotive industry and intend to rapidly become one of the leading providers of automated manufacturing solutions, which are used primarily by three of the top ten Tier I automotive part suppliers in the world. We also make precision components and tooling using our own custom-built manufacturing systems, process knowledge and automation technology. We purchase from third parties components for the electrical cabinet, which creates the automation and controls section of the machinery. The electrical cabinet consists of fuses, holders, relays, cables, wiring, controls and sensors, which we purchase from our suppliers, i.e. Gerrie Electric, Beckhoff, Allen Bradley and others. We integrate these purchased parts from our suppliers into our electrical and control design to make the automated tube bending machines operational. We provide all the programming of the electrical cabinet as well. The computer programming is based upon the specific needs.

Our business is in its early development and operating stages. To date, our primary activities include designing and installation of retrofits to existing automated systems, automated  spare parts for our tube bending machines, automated  maintenance and repairs. We are currently offering products such as Seat Frame Systems, IP Tube systems and Integrated Bend-Weld Systems for the automotive industry. Our primary focus will be placed on product engineering and manufacturing processes as discussed above to ensure the highest quality, product features and efficient manufacturing processing.
 
We are a full service provider of turn-key production solutions, specializing in tubular components for its tube bending machines. Our experience is firmly rooted in fabrication solutions for automated components, such as seat frames and instrument panel beams. Our expertise is in the areas of automation and machinery for computer numerical control (CNC ) bending, forming, piercing and laser cutting, which is applicable to a wide range of production solutions. We produce spare parts for the manufacturing equipment we design. We do not produce spare parts for automobiles.

RESULTS OF OPERATION

Overview

The Corporation, through its wholly owned subsidiary D&R Technology Inc., is involved in the engineering, design and manufacture of robotics and automation technology solutions, which management believes will enable the Corporation to become a recognized technology pioneer and market leader in the area of engineering. Serving as a comprehensive engineering partner, the Corporation works with other leading robotic manufacturers to provide the best automation technologies; providing automation solutions to a wide spectrum of customers and industries ranging from large Fortune 500 companies to small privately-held businesses. The automated solutions can be found in manufacturing, assembly and processing lines throughout the United States, Canada, Mexico and South America. D&R Technology Inc. has served the automotive industry for more than seven years and is currently applying its service solutions to other markets, such as medical robotics, personal robotic devices and water treatment industry. As of the date of this Quarterly Report, we have not realized any revenue from the medical robotics, personal robotic devices or water treatment industry.
 
 
15

 
 
We are involved in the area of engineering, design and the manufacturing of automated solutions through our automated tube bending machines for the automotive industry and intend to rapidly become one of the leading providers of automated manufacturing solutions, which are used primarily by three of the top ten Tier I automotive part suppliers in the world. We also make precision components and tooling using our own custom-built manufacturing systems, process knowledge and automation technology. We purchase from third parties components for the electrical cabinet, which creates the automation and controls section of the machinery. The electrical cabinet consists of fuses, holders, relays, cables, wiring, controls and sensors, which we purchase from our suppliers, i.e. Gerrie Electric, Beckhoff, Allen Bradley and others. We integrate these purchased parts from our suppliers into our electrical and control design to make the automated tube bending machines operational. We provide all the programming of the electrical cabinet as well. The computer programming is based upon the specific needs.
 
Our business is in its early development and operating stages. To date, our primary activities include designing and installation of retrofits to existing automated  systems, automated  spare parts for our tube bending machines, automated  maintenance and repairs. We are currently offering products such as Seat Frame Systems, IP Tube systems and Integrated Bend-Weld Systems for the automotive industry. Our primary focus will be placed on product engineering and manufacturing processes as discussed above to ensure the highest quality, product features and efficient manufacturing processing.
 
We are a full service provider of turn-key production solutions, specializing in tubular components for its tube bending machines. Our experience is firmly rooted in fabrication solutions for automated components, such as seat frames and instrument panel beams. Our expertise is in the areas of automation and machinery for computer numerical control (‘CNC’) bending, forming, piercing and laser cutting, which is applicable to a wide range of production solutions. We produce spare parts for the manufacturing equipment we design. We do not produce spare parts for automobiles.
 
   
For the nine months ended,
September 30,
 
   
2013
   
2012
 
                 
Revenue
  $ 1,562,971     $ 2,942,306  
Cost of sales
    905,836       1,292,346  
Gross profit
    657,135       1,649,960  
                 
Operating (gains) expenses:
               
Compensation
    375,818       984,228  
Bonuses forgiven
    (200,000 )        
Occupancy costs
    96,640       63,999  
Travel
    52,361       73,734  
Professional fees
    98,025       75,930  
Communication
    13,803       18,281  
Office and general
    33,009       47,135  
Foreign exchange (gain) loss
    (56,018 )     4,833  
Total operating expenses
    413,638       1,268,140  
                 
Income (loss) from operations
    243,497       381,820  
                 
Other expenses:
               
Interest expense
    11,135          
                 
Income tax expense (benefit)
    40,752       126,115  
                 
Net income (loss)
  $ 191,610     $ 255,705  
                 
Other comprehensive income (loss)
               
Foreign exchange adjustment
    (22,782 )     (31,628 )
                 
Comprehensive income (loss)
  $ 168,828     $ 224,077  
 
 
16

 
 
The financial information in the table above is derived from the quarterly unaudited financial statements. The following discussion should be read in conjunction with our unaudited financial statements and the related notes that appear elsewhere in this Current Report on Form 10-Q. The following discussion contains forward-looking statements that reflect our plans, estimates and beliefs. The Corporation’s actual results could differ materially from those discussed in the forward looking statements. Factors that could cause or contribute to such differences include, but are not limited to those discussed below and elsewhere in this Current Report on Form 10-Q. The financial statements are stated in United States Dollars and are prepared in accordance with United States Generally Accepted Accounting Principles.

Nine Month Period Ended September 30, 2013 Compared to Nine Month Period Ended September 30, 2012

Our comprehensive income for the nine month period ended September 30, 2013 was $168,828 compared to comprehensive income of $224,077 during the nine month period ended September 30, 2012, a decrease of $55,249.

Revenue: We generated revenue during the nine month period ended September 30, 2013 in the amount of $1,562,971 compared to $2,942,306 generated during the nine month period ended September 30, 2012. Overall, revenue decreased 47% from the nine months ended September 30, 2013 as compared to September 30, 2012 primarily due to the reduction in work performed on retrofitting of old machines where sales decreased 75% or approximately $966,000 year over year. Efficiencies in the machines and repairs completed in the prior year resulted in fewer spare parts and service revenue during the first three quarters of 2013.

Major components of the revenue mix for change from 2012 to 2013 are as follows:

a.  
Prototypes Parts – decreased $76,000.  Revenue consisted of a charge per part and set up fees on our tube bender in the plant. (JCI $30,000 in prototype parts; Toyota Boshoku $0.00 in prototype parts for the 420A. This amount decreased because JCI projects were all completed and no new work from Toyota Boshoku. We did some parts for MIG –Athens.
 
b.  
Service Revenue – increased $107,000.  Revenue consists of onsite repairs, programming and production support.  There was no change in the third quarter in this area as no service calls were received.
 
c.  
Spare Parts – decreased $67,000 for parts required by many customers including JCI, Toyota, PWO-Kitchener, Van Rob-Mexico and M.I.G.-Athens to replace worn parts.  Fewer orders place in the first three quarters of 2013 as indications from customers were the existing machines were operating efficiently.
 
d.  
Retrofit Systems – decrease of $966,000.  We assess old machines and recommend that specified work needs to be done on it. This includes all mechanical, electrical, hydraulic and pneumatics as required. We then replace worn parts on old benders – overhauled benders for JCI-Lakewood Bender #2, MIG-Athens, PWO-Kitchener, JCI-Athens and JCI-Ramos move machines for customers, install additional tooling units on existing benders.  Fewer machines were retrofitted in 2013 versus several in the first three quarters of 2012.
 
e.  
Seat Frame System – decrease of $161,000.  One machine was completed in each of 2012 and 2013 during the first six months of the fiscal year; however, the price point on the 2013 machine was marginally lower.
 
f.  
Medical robotics, personal robotic devices and water treatment industry – We have not generated revenue from these sources as yet and will continue to investigate opportunities in these areas to augment its core business.
 
 
17

 
 
Cost of sales: During the nine month period ended September 30, 2013, we incurred $905,836 in cost of sales compared to $1,292,346 incurred during the nine month period ended September 30, 2012. The change in products sold in the current fiscal period contributed to a decrease in the gross margin of the Corporation by approximately 14 percentage points.  Ongoing work on retrofit systems and prototype parts, where the majority of labor and product costs are specifically borne by the customer greatly assisted in offsetting labor costs contributed to higher margins in the 2012 versus 2013 three quarter year comparison.
 
Operating expenses: During the nine month period ended September 30, 2013, we incurred operating expenses of $413,638 compared to $1,2168,140 incurred during the nine month period ended September 30, 2012 (a decrease of $854,502). During the nine month period ended September 30, 2013, we operating expenses consisted of: (i) compensation of $375,818 (2012: $984,228); (ii) bonuses forgiven of ($200,000) (2012: $-0-): (iii) occupancy costs of $96,640 (2012: $63,999); (iv) travel of $52,361 (2012: $73,734); (v) professional fees of $98,025 (2012: $75,930); (vi) communication of $13,803 (2012: $18,281); (vi) office and general of $33,009 (2012: $47,135);  and (vii) foreign exchange of ($56,018) (2012: $4,833). The continued weakening Canadian dollar in 2013 against the United States dollar resulted in a foreign exchange gain of $56,018 on denominations transacted and settled in foreign currencies, primarily being sales to the United States from which the monies are being converted and used to satisfy Canadian dollar operational requirements. General and administrative expenses generally consisted of auditor, edgarizing and transfer agent fees.

Operating expenses include overhead expenses such as rent, management and staff salaries, general insurance, marketing, accounting, legal and office expenses. These expenses decreased by approximately $855,000 from 2012, primarily due to compensation. Senior management chose to forgive their 2012 bonus in the first two quarters of 2013.  Additionally, more time was allocated to cost of sales for work completed on the 2013 machine than in the previous year.  Professional fees also rose in the first nine months due to accounting fees associated with the yearend 2012 audit being incurred. Occupancy costs increased $33,000 as the plant was idle during more of the year and management determined that a greater percentage should be expensed as general and administrative as opposed to being capitalized in the quarter end work in progress.  Travel decreased year over year by $21,000 as more work and assistance was required in 2012 than the current year coupled with a salesman being in place in 2012.  No such individual is being utilized in the current year.

Other Expenses. During the nine month period ended September 30, 2013, we incurred other expenses in the amount of $51,887 compared to $126,115 incurred during the nine month period ended September 30, 2012. During the nine month period ended September 30, 2013, other expenses consisted of: (i) $11,125 (2012: $-0-) in interest; and (ii) $40,752 (2012: 126,115) in income tax expense (benefit).

Net Income.  Thus, during the nine month period ended September 30, 2013, our net income was $191,610 compared to $255,702 during the nine month period ended September 30, 2012.

Other Comprehensive Income.  During the nine month period ended September 30, 2013, we recorded a foreign exchange adjustment of ($22,782) compared to ($31,628) recorded during the nine month period ended September 30, 2012.

Comprehensive income: Thus, during the nine month period ended September 30, 2013, our comprehensive income was $168,828 compared to comprehensive income of $224,077 for the same period in 2012. The weighted average number of shares outstanding was 88,650,000 for the nine months ended September 30, 2013 and 85,283,150 for the nine months ended September 30, 2012.

 
18

 
 
   
For the three months ended,
September 30,
 
   
2013
   
2012
 
             
Revenue
  $ 57,019     $ 590,502  
Cost of sales
    44,762       166,206  
Gross profit
    12,257       424,296  
                 
Operating (gains) expenses:
               
Compensation
    67,508       336,091  
Bonuses forgiven
    -       -  
Occupancy costs
    54,431       21,425  
Travel
    4,921       32,389  
Professional fees
    12,456       17,037  
Communication
    4,883       8,157  
Office and general
    7,704       13,218  
Foreign exchange (gain) loss
    (26,943 )     5,246  
Total operating expenses
    124,960       433,563  
                 
Income (loss) from operations
    (112,703 )     (9,267 )
                 
Other expenses:
               
Interest expense
    3,711       -  
                 
Income tax expense (benefit)
    (72,420 )     75,114  
                 
Net income (loss)
  $ (43,994 )   $ (84,381 )
                 
Other comprehensive income (loss)
               
Foreign exchange adjustment
    (17,737 )     -  
                 
Comprehensive income (loss)
  $ (61,731     $ (84,381 )
 
Three Month Period Ended September 30, 2013 Compared to Three Month Period Ended September 30, 2012

Revenue: We generated revenue during the three month period ended September 30, 2013 in the amount of $57,019 compared to $590,502 generated during the three month period ended September 30, 2012 (a decrease of $533,483).  Revenue decreased approximately 90% for the three months ended September 30, 2013 versus the same period in the prior year.  This was due to: A $74,000 decrease in prototype parts sales; a $107,000 decrease in service labor sales; a $329,382 decrease in retrofit sales; and, a $41,000 decrease in seat frame sales.  Spare part sales increased $37,000 in 2013 versus the same period in 2012.

Cost of sales: During the three month period ended September 30, 2013, we incurred $44,762 in cost of sales compared to $166,206 incurred during the three month period ended September 30, 2012. The 51-point decrease in the gross profit percentage year over year is wholly attributed to the mix of items sold.  To this end, the high margin sale of spare parts greater enhanced this number as opposed to the more comprehensive mix in the prior period of 2012.
 
 
19

 
 
Operating expenses: During the three month period ended September 30, 2013, we incurred operating expenses of $124,960 compared to $433,563 incurred during the three month period ended September 30, 2012 (a decrease of $308,603). During the three month period ended September 30, 2013, we operating expenses consisted of: (i) compensation of $67,508 (2012: $336,091); (ii) occupancy costs of $543,431 (2012: $21,425); (iii) travel of $4,921 (2012: $32,389); (iv) professional fees of $12,456 (2012: $17,037); (v) communication of $4,883 (2012: $8,157); (v) office and general of $7,704 (2012: $13,218);  and (vii) foreign exchange of ($26,943) (2012: $5,246). Operating expenses decreased from the 2012 quarter to the 2013 quarter and was mostly due to more time having been allocated to cost of sales for work completed on the 2013 machine than in the previous year.  Professional fees decreased in the quarter primarily due to the slow down at the Company resulting in less administrative work being required.  Travel expenses decreased due to the timing of services calls quarter over quarter.  As mentioned in the previous section, occupancy costs increased $32,000 as the plant was idle during more of the year and management determined that a greater percentage should be expensed as general and administrative as opposed to being capitalized in the quarter end work in progress.
 
Other Expenses. During the three month period ended September 30, 2013, we recorded other expenses consisting of $3,711 in interest, which was offset by ($72,420) in income tax compared to other expenses consisting of $75,114 in income tax expenses recorded during the nine month period ended September 30, 2012.

Net Income.  Thus, during the three month period ended September 30, 2013, our net loss was($43,994) compared to a net loss of ($84,381) incurred during the three month period ended September 30, 2012.

Other Comprehensive Income.  During the three month period ended September 30, 2013, we recorded a foreign exchange adjustment of ($17,737) compared to ($-0-) recorded during the three month period ended September 30, 2012.

Comprehensive income: During the three month period ended September 30, 2013, our comprehensive loss was ($61,731) compared to comprehensive loss of ($84,381) for the three month period ended September 30, 2012. The weighted average number of shares outstanding was 88,650,000 for the three months ended September 30, 2013 and September 30, 2012 as no new shares were issued in this time frame in either year.

LIQUIDITY AND CAPITAL RESOURCES

As of September 30, 2013

As of September 30, 2013, our current assets were $1,979,947 and our current liabilities were $1,150,047, which resulted in a working capital surplus of $829,899. As of September 30, 2013, current assets were comprised of: (i) $1,063,761 in cash; (ii) $251,623 in accounts receivable; (iii) $649,654 in inventory; (iv) $14,667 in security deposits; and (v) $241 in prepaid expenses. As of September 30, 2013, current liabilities were comprised of: (i) $258,398 in accounts payable and accrued expenses; (ii) $185,600 in convertible notes payable; (iii) $674,935 in deferred revenue; (iv) $16,988 in warranty provision; and (v) $14,126 in taxes payable.

As of September 30, 2013, our total assets were $2,209,369 comprised of: (i) $1,979,946 in current assets; and (ii) $229,423 in fixed assets, net of depreciation. The increase of total assets during the nine month period ended September 30, 2013 from December 31, 2012 was primarily due an increase in cash and inventory.

As of September 30, 2013, our total liabilities were $1,150,047 comprised entirely of current liabilities. The increase in liabilities during the nine month period ended September 30, 2013 was primarily due to an increase in deferred revenue.

Total stockholders’ equity increased from $890,493 as of December 31, 2012 to $2,240,318 as of September 30, 2013.

Cash Flows from Operating Activities

For the nine month period ended September 30, 2013, net cash flows provided by operating activities was $256,829 consisting of net income of $191,611. Net cash flows from operating activities was adjusted by ($200,000) in bonus forgiven and $33,133 in depreciation. Net cash flow from operating activities was further changed by: (i) an increase of $178,587 in accounts receivable; (ii) an increaseof $584,535 in inventory; (iii) a decrease of $1,581 in prepaid expenses; (iv) a decrease of $62,246 in accounts payable and accrued expenses; (v) an increase of $662,111 in deferred revenue; (vi) a decrease of $37,704 in warranty provision; and (ix) a decrease of $50,694 in taxes recoverable/payable.

 
20

 
 
For the nine month period ended September 30, 2012, net cash flows used by operating activities was ($137,528)  consisting primarily of net income of $255,705. Net cash flows from operating activities was adjusted by $18,135 in depreciation. Net cash flow from operating activities was further changed by: (i) an increase of $52,625 in accounts receivable; (ii) an increase of $607,433 in inventory; (iii) a decrease of $389 in security deposit; (iv) a decrease of $145,646 in accounts payable and accrued expense; (v) a decrease of $1.047,665 in deferred revenue; (vi) a decrease of $32,220 in warranty provision; and (viii\) an increase of $153,489 in taxes recoverable/payable.
 
Cash Flows from Investing Activities

For the nine month period ended September 30, 2013, net cash flows used in investing activities was $91,618 consisting of purchase of fixed assets. Net cash flows provided by investing activities for the nine month period ended September 30, 2012 was $2,849 resulting from cash received from the Share Exchange Agreement.

Cash Flows from Financing Activities

For the nine month period ended September 30, 2013, net cash flows provided by financing activities was $-0- compared to $304,922 for the nine month period ended September 30, 2012. Net cash flows provided by financing activities for the nine month period ended September 30, 2012 consisted of $490,650 due to a shareholder advance, which was offset by ($185,728) in repayment to stockholder.

We expect that working capital requirements will continue to be funded through a combination of our existing funds and generation of revenues. Our working capital requirements are expected to increase in line with the growth of our business.

PLAN OF OPERATION

Our principal demands for liquidity are to increase capacity, inventory purchase, sales distribution, and general corporate purposes.  We are in the process of being accepted as a global prototype supplier by Johnson Controls compared to our prior role as a supplier for North America. We had been involved in discussions with Johnson Controls regarding prototypes and parts production. Johnson Controls visited our facility during early 2012 to conduct an audit for global recommendation. Their goal was to understand the processes we use to run the business and the controls that we have in place so that we were assured to have utmost control over the quality of work. The audit was based on our employees and their qualifications, data management, processes, tooling and equipment and parts and material management. Johnson Controls conducted a tour of our facility, which was followed up with a final review on May 3, 2012. Subsequently we received a call from Johnson Controls stating that we had been accepted and recommended for their global work. Therefore, we have been accepted for global work and thus provided the basis for previously disclosed projections. We may achieve those revenue projections during fiscal year 2013, however, we may also not achieve that level of revenue.  As of the date of this Quarterly Report, we are running parts for Johnson Control that will be shipped over the next six to eight weeks. Management believes that since we have been accepted as a global prototype supplier by Johnson Controls, our growth rate will start to increase.
 
We intend to meet our liquidity requirements, including capital expenditures related to the purchase of equipment, purchase of inventory, and the expansion of its business, through cash flow provided by operations and funds raised through proceeds from the issuance of debt or equity.
 
Although we have not met our anticipated growth rate and level of business necessary to achieve the projections set forth in our November 7, 2011 press release, we continue to be well positioned financially.  Cash reserves at September 30, 2013 and December 31, 2012 totaled approximately $1,063,761 and $921,332, respectively, with a working capital surplus of $829,899 and $719,555, respectively. Amounts receivable decreased by $147,638 from December 31, 2012 due to collection efforts, inventory has increased by $584,535 primarily due to the new orders for machine build outs.  We only buy material as needed, based on confirmed job orders, thereby eliminating unnecessary inventory purchases.    Payables have decreased by $137,754 at September 30, 2013 from December 31, 2012, which is attributed to lower trade payables due to new projects started in the first quarter of 2013; this is evidenced by increase in inventory.  

 
21

 
 
With a flexible labour force, workers are hired on a project by project basis, and strong inventory management, we are able to manage our cash flow to meet the ever changing needs of the business. We can expand and contract very quickly based on customer demand. Our major customer, JCI, is consistently submitting new projects.  While deferred revenue increased by $327,410 from December 31, 2012 due to the timing of new orders received in the current year to completion of work in the prior year, we had $705,884.00 of project work in process at the end of September 2013 with a total contract value of approximately $882,360.00.  We have received committed future orders of over $109,957.55 which are anticipated to be completed by the fourth quarter of 2013.  Other revenue opportunities have historically materialized to supplement this revenue being service and retooling

We have not paid any sums for public relations or investor relations.

MATERIAL COMMITMENTS

A material commitment during the fiscal year 2013 is the Convertible Promissory Notes pertaining to the aggregate amount of $36,000 that remains due and owing to each of Messrs. Treanor and Russell. We are currently in default of the Convertible Promissory Note regarding the remaining aggregate $36,000 due and owing to each of Messrs. Treanor and Russell, which accrues interest at the rate of 8% per annum until paid in full. As of the date of this Quarterly Report, we have received executed assignments from the respective creditors regarding the Settlement Agreements and the Convertible Notes related to the remaining portion due and owing of $72,000.

The original Convertible Notes consisted of the following: (i) principal amount of $40,000 dated April 15, 2008 issued to Donna Boyle, (b)  principal amount of $60,000 dated December 15, 2006 issued to Raymond Russell; and (c) principal amount of $60,000 dated December 15, 2006 issued to Stephen Treanor. On December 15, 2009, we entered into three separate Settlement Agreements with Raymond Russell, Donna Boyle and Stephen Treanor, respectively, with regards to the aggregate amounts due and owing to each creditor under the respective Convertible Promissory Note. In accordance with the Settlement Agreement with Stephen Treanor: (i) an aggregate of $72,000 in principal and accrued interest was agreed as due and owing as of December 15, 2009; and (ii) we agreed to convert $36,000 of the Convertible Note into shares of our restricted common stock at the rate of $0.005 per share. In accordance with the Settlement Agreement with Raymond Russell: (i) an aggregate of $72,000 in principal and accrued interest was agreed as due and owing as of December 15, 2009; and (ii) we agreed to convert $36,000 of the Convertible Note into shares of our restricted common stock at the rate of $0.005 per share. In accordance with the Settlement Agreement with Donna Boyle: (i) an aggregate of $41,600 in principal and accrued interest was agreed as due and owing as of December 15, 2009; and (ii) we agreed to convert $41,600 of the Convertible Note into shares of our common stock at the rate of $0.005 per share.

Thus, there is no remaining liability associated with Donna Boyle. The remaining liability associated with Stephen Treanor and Raymond Russell is $36,000 plus accrued interest, respectively. We are currently in default of the Convertible Promissory Note regarding the remaining aggregate $36,000 due and owing to each of Messrs. Treanor and Russell, which accrues interest at the rate of 8% per annum until paid in full. The two remaining Convertible Notes and the Settlement Agreements have been assigned to Mr. Paolucci. In the event that Mr. Paolucci elects to convert the two remaining Convertible Notes and/or the Settlement Agreements, an aggregate 37,120,000 shares of common stock would be issuable.

PURCHASE OF SIGNIFICANT EQUIPMENT

We do not intend to purchase any significant equipment during the next twelve months.

OFF-BALANCE SHEET ARRANGEMENTS

As of the date of this Quarterly Report, we do not have any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that are material to investors.

 
22

 
 
CRITICAL ACCOUNTING ESTIMATES AND POLICIES

The discussion and analysis of our financial condition and plan of operations is based upon our consolidated financial statements, which have been prepared in accordance with U.S. generally accepted accounting principles (“GAAP”). The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenue and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates including, among others, those affecting revenue, the allowance for doubtful accounts, the salability of inventory and the useful lives of tangible and intangible assets. The discussion below is intended as a brief discussion of some of the judgments and uncertainties that can impact the application of these policies and the specific dollar amounts reported on our financial statements. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form our basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions, or if management made different judgments or utilized different estimates. Many of our estimates or judgments are based on anticipated future events or performance, and as such are forward-looking in nature, and are subject to many risks and uncertainties, including those discussed elsewhere in this Quarterly Report on Form 10-Q. We do not undertake any obligation to update or revise this discussion to reflect any future events or circumstances.

Uses of Estimates

The preparation of consolidated financial statements in conformity with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of revenues and expenses during the reporting period.  Financial statement items subject to significant judgment include expense accruals, as well as income taxes and loss contingencies.  Actual results could differ from those estimates.

The areas which require management to make significant judgments, estimates and assumptions in determining carrying values include, but are not limited to:

Assets’ carrying values and impairment charges 

Assets, including property and equipment and inventory, are reviewed for impairment whenever events or changes in circumstances indicate that their carrying amount exceed their recoverable amounts.  In the determination of carrying values and impairment charges, management looks at the higher of recoverable amount or fair value less costs to sell in the case of assets and at objective evidence, significant or prolonged decline of fair value on financial assets indicating impairment. These determinations and their individual assumptions require that management make a decision based on the best available information at each reporting period.

Income taxes and recoverability of potential deferred tax assets 

In assessing the probability of realizing income tax assets recognized, management makes estimates related to expectations of future taxable income, applicable tax planning opportunities, expected timing of reversals of existing temporary differences and the likelihood that tax positions taken will be sustained upon examination by applicable tax authorities. In making its assessments, management gives additional weight to positive and negative evidence that can be objectively verified. Estimates of future taxable income are based on forecasted cash flows from operations and the application of existing tax laws in each jurisdiction. The Company considers whether relevant tax planning opportunities are within the Company’s control, are feasible, and are within management’s ability to implement. Examination by applicable tax authorities is supported based on individual facts and circumstances of the relevant tax position examined in light of all available evidence. Where applicable tax laws and regulations are either unclear or subject to ongoing varying interpretations, it is reasonably possible that changes in these estimates can occur that materially affect the amounts of income tax assets recognized. Also, future changes in tax laws could limit the Company from realizing the tax benefits from the deferred tax assets. The Company reassesses unrecognized income tax assets at each reporting period.

 
23

 
 
Cash and Cash Equivalents

The Company considers all highly liquid instruments with maturities of three months or less at the time of issuance to be cash equivalents.  At June 30, 2013, the Company had no cash equivalents.  The Company maintains its cash in bank deposit accounts which may exceed federally insured limits.  As of March 31, 2013, the Company’s accounts are insured for $100,000 CDN by Canadian Deposit Insurance Corporation for Canadian bank deposits and are fully insured by FDIC for US bank deposits.  The Company is holding $34,119 CDN in excess of the $100,000 insured Canadian bank deposits at September 30, 2013.  The entirety of the Company’s US bank deposits are insured at September 30, 2013.

Inventory

Inventory, comprised principally of raw materials, is stated at the lower of cost or market using the first-in, first-out (“FIFO”) method. This policy requires D&R to make estimates regarding the market value of our inventory, including an assessment of excess or obsolete inventory. The Company determines excess and obsolete inventory based on an estimate of the future demand and estimated selling prices for its products.

Allowance for Doubtful Accounts
 
We extend credit to our customers in the normal course of business. The allowance for doubtful accounts represents our best estimate of the amount of probable credit losses in our existing accounts receivable. We determine the allowance based on specific customer information, historical write-off experience and current industry and economic data. Account balances are charged-off against the allowance when we believe it is probable the receivable will not be recovered. Management believes that there are no concentrations of credit risk for which an allowance should be established. Although management believes that now allowance is needed, it is possible that the estimated amount of cash collections with respect to accounts receivable could change. As of September 30, 2013 and December 31, 2012, the Company has not deemed any accounts uncollectible.

Revenue Recognition
 
The Company recognizes revenue in accordance with Securities and Exchange Commission (“SEC”) Staff Accounting Bulletin No. 101,"Revenue Recognition in Financial Statements" ("SAB 101") as modified by SEC Staff Accounting Bulletin No.104. Under SAB 101, revenue is recognized when the project is complete, and when collection of the resulting receivable is reasonably assured.
 
1.
Spare parts – Revenues and cost of sales are recognized at the time of sale.
2.
Service – Revenues and cost of sales are recognized at the time services are performed and accepted by customer via sign off.
3.
Seat systems and tooling – progress invoicing to the customer are recorded as deferred revenue. When the projects are installed and accepted by the customer the final invoice is issued and all deferred revenue is recognized along with the related work in process costs for the project. Systems generally take 20-28 weeks to design, manufacture, assemble, and then ship to our various customers.
 
D&R provides standard warranties for its product from the date of shipment. Estimated warranty obligations are recorded at the time of sale and amortized over the two year warranty period as of September 30, 2013 and December 31, 2013, warranty liability was $16,988 and $54,692, respectively.
 
ITEM 3.   QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Not required for smaller reporting company.

 
24

 
 
ITEM 4.   CONTROLS AND PROCEDURES
 
EVALUATION OF DISCLOSURE CONTROLS AND PROCEDURES
 
We have performed an evaluation under the supervision and with the participation of our management, including our Chief Executive Officer (CEO) and Chief Financial Officer (CFO), of the effectiveness of our disclosure controls and procedures, (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act). Based on that evaluation, our management, including our CEO and CFO, concluded that our disclosure controls and procedures were not effective as of September 30, 2013 to provide reasonable assurance that information required to be disclosed by us in the reports filed or submitted by us under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms.

Based on such evaluation, our Chief Executive Officer/Chief Financial Officer have concluded that, as of the end of the period covered by this Quarerly Report on Form 10-Q, our interal controls over financial reporting were not effective:

·  
to give reasonable assurance that the information required to be disclosed by us in reports that we file under the Securities Exchange Act of 1934 is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission's rules and forms, and

·  
to ensure that information required to be disclosed in the reports that we file or submit under the Securities Exchange Act of 1934 is accumulated and communicated to our management, including our Chief Executive Officer and our Chief Financial Officer, to allow timely decisions regarding required disclosure.

We believe that the foregoing steps will remediate the significant deficiencies identified above, and we will continue to monitor the effectiveness of these steps and make any changes that our management deems appropriate. A material weakness (within the meaning of PCAOB Auditing Standard No. 5) is a deficiency, or a combination of deficiencies, in internal control over financial reporting, such that there is a reasonable possibility that a material misstatement of our annual or interim financial statements will not be prevented or detected on a timely basis. A significant deficiency is a deficiency, or a combination of deficiencies, in internal control over financial reporting that is less severe than a material weakness, yet important enough to merit attention by those responsible for oversight of the company's financial reporting.

During our assessment of the effectiveness of internal control over financial reporting as of September 30, 2013, management identified significant deficiencies related to: (i) the absence of an Audit Committee as of September  30, 2013; and (ii) a lack of segregation of duties within accounting functions.

We began preparing to be in compliance with the internal control obligations, including Section 404, for our fiscal year ending December 31, 2013. In an effort to improve our internal control environment, management has engaged a Chartered Accountant to review the work prepared by the controller. He is independent of the daily accounting function. He prepares the quarterly financial statement after reviewing and recommending adjustments to the records based on his analysis of the financial information presented. This review includes vouching and reconciling key accounts to source documents.

In order to correct the foregoing weaknesses, we have taken certain further remediation measures and designed new internal controls and procedures to ensure: (a) effectiveness and efficiency of operations; (b) reliability of financial reporting; and (c) compliance with laws and regulations. To that end, management will provide a controlled environment which organizes and influences its people.
 
     (a)  
Management is establishing an information and communication system for its executives and employees allowing them to carry out their responsibilities in an organized and process driven manner.
 
     (a)  
The firm engaged the Chartered Accountant to assist with: (a) compiling and maintaining our financial records; (b) assisting the bookkeeping staff with proper recording of transactions; (c) maintaining permanent accounting records and proper backup procedures; and (d) providing continuous monitoring of accounting functions throughout the company. In addition, the Chartered Accountant will perform a risk assessment which identifies and analyzes the relevant risks management should address in order to achievement of its objectives. The Chartered Accountant will also assist with the preparation of written policies and procedures that will help ensure management directives are carried out.
 
 
25

 
 
     (b)  
Our President/Chief Executive Officer is serving as the point of communication between us and the audit firm. Communication between our President/Chief Executive Officer and the audit firm’s engagement partner has been established to ensure that the audit is aware of management’s intent and actions.
  
Management’s Annual Report on Internal Control Over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act). Under the supervision and with the participation of the Company’s management, including the chief executive officer and principal financial officer, we evaluated the effectiveness of our internal control over financial reporting as of September 30, 2013. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (“COSO”) in Internal Control-Integrated Framework.

This Quarterly Report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to temporary rules of the SEC that permit us to provide only management’s report in this Quarterly Report on Form 10-Q.

Inherent Limitations on Effectiveness of Controls

We believe that a controls system, no matter how well designed and operated, cannot provide absolute assurance that the objectives of the controls system are met, and no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within a company have been detected. Our disclosure controls and procedures are designed to provide reasonable assurance of achieving their objectives, and our CEO and our CFO have concluded that these controls and procedures are not effective at the “reasonable assurance” level.
 
Changes in internal controls

There were no changes in internal controls for the nine month period ended September 30, 2013.

AUDIT COMMITTEE REPORT

Our Board of Directors has not established an audit committee. The respective role of an audit committee has been conducted by our Board of Directors. We intend to establish an audit committee during fiscal year 2013. When established, the audit committee's primary function will be to provide advice with respect to our financial matters and to assist our Board of Directors in fulfilling its oversight responsibilities regarding finance, accounting, and legal compliance. The audit committee's primary duties and responsibilities will be to: (i) serve as an independent and objective party to monitor our financial reporting process and internal control system; (ii) review and appraise the audit efforts of our independent accountants; (iii) evaluate our quarterly financial performance as well as its compliance with laws and regulations; (iv) oversee management's establishment and enforcement of financial policies and business practices; and (v) provide an open avenue of communication among the independent accountants, management and our Board of Directors.
 
 
26

 
 
PART II. OTHER INFORMATION

ITEM 1.   LEGAL PROCEEDINGS

No report required.

ITEM IA. RISK FACTORS

No report required.

ITEM 2.   UNREGISTERED SALES OF SECURITIES AND USE OF PROCEEDS

No report required.

ITEM 3.   DEFAULTS UPON SENIOR SECURITIES

No report required.

ITEM 4.   MINE SAFETY DISCLOSURES

No report required.
 
 
27

 

ITEM 5.   OTHER INFORMATION

Effective on April 1, 2013, our Board of Directors accepted the resignation from Veljiko Pjevac as a member of the Board of Directors effective April 1, 2013. Mr. Pjevac did not resign as a result of any disagreement with us on any matter relating to our operations, policies or practices. Simultaneously, the Board of Directors accepted the consent from H. Beth Carey as a member of our Board of Directors and appointed Ms. Carey as a member of the Board of Directors effective April 1, 2013. Therefore, as of the date of this Quarterly Report, the Board of Directors consists of the following members: Berardino Paolucci, Drasko Karanovic and H. Beth Carey.
 
Biography
 
H. Beth Carey.  Ms. Carey has over thirty-five years of experience as a senior accountant involving various industries, including construction, service and manufacturing and non-profit. Ms. Carey was employed by Dieco Technologies from 2000 through 2003 as the assistant to the controller for the accounting department. Her duties included accounts receivables/collections, accounts payable, payroll and salary (hourly and commissions), accruals, month end journal entries, general ledger maintenance, costing spreadsheets for program engineers for all projects, sales support as required by salesmen,  government remittances and work in process.

In June 2005, Ms. Carey became employed by D&R Technology as the accountant. Ms. Carey was required to perform substantial number of duties required to keep accounting, payroll and purchasing functioning at a high level. She provided support to executive officers in sales and projects who needed financial information, such as job costing details. She further worked with executive officers in purchasing obtaining quotes for products in order to provide cost savings and customer service contact for spare parts and shipping. Ms. Carey also prepares all financial statements for our accountant and liasons with the accountant for the preparation of the quarterly and annual financial statements. She further provides support to the auditors during the audit of our financials. The nature of her responsibilities discussed above, including the underlying requisite financial and accounting skills, establish Ms. Carey's qualification as a member of our Board of Directors.

Ms. Carey earned a college degree in finance and accounting from Sheridan College – Mississauga  and achieved Level 3 in the Certified General Accountants Course.
 
 
28

 
 
ITEM 6.   EXHIBITS AND REPORTS ON FORM 8-K
 
(d) Exhibits.  The exhibits listed in the following Exhibit Index are filed as part of this Current Report on Form 8-K.
 
Exhibit
Number
 
Description
     
3. 1
 
Articles of Incorporation of Ecoland International Inc. and all amendments thereto incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Registration Statement on Form SB-2 on February 1, 2007 and the Current Report on Form 8-K filed with the Securities and Exchange Commission on July 20, 2012.
     
3.2
 
Bylaws of Ecoland International Inc. incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Registration Statement on Form SB-2 on February 1, 2007
     
10.1
 
Share Exchange Agreement between Ecoland International Inc. and D&R Technologies Inc
     
10.2
 
Lease Agreement between STENVI STEEL CO. LTD. (The Landlord) and D & R TECHNOLOGY INC. (The Tenant) incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on August 20, 2012.
     
10.3
 
Lease between Stenvi Steel Co. Ltd and D&R Technology Inc. dated March 10, 2010 incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.4
 
Stock Purchase Agreement among D&R Technology, Inc. and certain selling shareholders of Ecoland International Inc. dated November 7, 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.5
 
Rescission Agreement among D&R Technology Inc. and certain shareholders of Ecoland International Inc. dated January 27, 2012 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.6
 
Convertible Promissory Note between Ecoland International Inc. and Stephen Treanor dated December 15, 2006 incorporated herewith as filed with the Securities and Exchange Commission as an exhibit to the SB-2 Registration Statement on April 18, 2007.
     
10.7
 
Convertible Promissory Note between Ecoland International Inc. and Raymond Russell dated December 15, 2006 incorporated herewith as filed with the Securities and Exchange Commission as an exhibit to the S-1 Registration Statement on April 18, 2007.
     
10.8
 
Convertible Promissory Note between Ecoland International Inc. and Donna Boyle dated April 15, 2008 incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.9
 
Purchase Order 013863 dated March 6, 2012 from Broshco Fab Products incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.10
 
Purchase Order 39066968 dated September 14, 2011 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.11
 
Purchase Order 39073789 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.12
 
Purchase Order 39074711 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
 
 
29

 
 
10.13
 
Purchase Order 39079925 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.14
 
Purchase Order 39082436 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.15
 
Purchase Order 39083371 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.16
 
Purchase Order 39083718 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
 
10.17
 
Purchase Order 4006857 from Manufacturers Industrial Group incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.18
 
Settlement Agreement between Ecoland International Inc. and Stephen Treanor dated December 15, 2009 incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.19
 
Settlement Agreement between Ecoland International Inc. and Raymond Russell dated December 15, 2009 incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.20
 
Settlement Agreement between Ecoland International Inc. and Donna Boyle dated December 15, 2009 incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on October 11, 2012.
     
10.21
 
Purchase Order 39076849 from Johnson Controls  incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on December 17, 2012 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013
     
10.22
 
Purchase Order 39064982 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on December 17, 2012 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.23
 
Purchase Order 39043224 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on December 17, 2012 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.24
 
Purchase Order 39061937 from Johnson Controls incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on December 17, 2012 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.25
 
Assignment Agreement dated January 2, 2013 between Stephen Treanor and Bernardino Paolucci 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
     
10.26
 
Assignment Agreement dated January 2, 2013 between Raymond Russell and Bernardino Paolucci 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
 
10.27
 
Assignment Agreement dated January 2, 2013 between Donna Boyle and Bernardino Paolucci.
     
10.28
 
Purchase Order 39099733 Rev. 2 dated February 5, 2013 from Johnson Controls 2011 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on February 8, 2013.
 
 
30

 
 
10.29
 
Purchase Order 50382 dated November 15, 2011 with PWO Canada Inc. as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
     
10.30
 
Purchase Order 182366 dated November 23, 2011 Toyota Boshuku as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
     
10.31
 
Purchase Order 182367 Dated November 28, 2011 with Toyota Boshuku as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
 
10.32
 
Purchase Order 40863 dated February 4, 2012 with Toyota Boshuku as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
     
10.33
 
Purchase Order 21052074 dated March 12, 2012 with Johnson Controls as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
     
10.34
 
Escrow Agreement between Novus Robotics Inc. and Manhattan Transfer Registrar Co. dated June 4, 2013 as filed with the Securities and Exchange Comission as an Exihibt to the Current Report on Form 8-K on June 4, 2013.
     
21
 
List of Subsidiaries incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on December 17, 2012.
     
99.1
 
Audited financial statements of D&R Technologies Inc. incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on August 20, 2012.
     
99.2
 
Unaudited pro forma combined financial statements of D&R and Ecoland International Inc. incorporated herewith as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on form 8-K on August 20, 2012.
     
99.3
 
Press Release of Novus Robotics Inc. dated January 5, 2013 as filed with the Securities and Exchange Commission as an Exhibit to the Current Report on Form 8-K on March 20, 2013.
     
31.1   Rule 13a-15(e)/15d-15(e) Certification by the Chief Executive Officer and Chief Financial Officer *
     
32.1   Certification by the Chief Executive Officer and Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 *
 
101.INS **
 
XBRL Instance Document
     
101.SCH **
 
XBRL Taxonomy Extension Schema Document
     
101.CAL **
 
XBRL Taxonomy Extension Calculation Linkbase Document
     
101.DEF **
 
XBRL Taxonomy Extension Definition Linkbase Document
     
101.LAB **
 
XBRL Taxonomy Extension Label Linkbase Document
     
101.PRE **
 
XBRL Taxonomy Extension Presentation Linkbase Document
 
** XBRL (Extensible Business Reporting Language) information is furnished and not filed or a part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of Section 18 of the Securities Exchange Act of 1934, as amended, and otherwise is not subject to liability under these sections.
 
 
31

 
 
SIGNATURES
 
Pursuant to the requirements of the Exchange Act, the registrant caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
 
NOVUS ROBOTICS INC.
 
       
Dated: November 14, 2013
By:
/s/ Berardino Paolucci
 
   
Berardino Paolucci,
 
   
President/Chief Executive Officer
 
       
       
Dated: November 14, 2013
By:
/s/ Berardino Paolucci
 
   
Berardino Paolucci,
 
   
Chief Financial Officer
 
 
 
32