Attached files

file filename
EXCEL - IDEA: XBRL DOCUMENT - LIQUIDMETAL TECHNOLOGIES INCFinancial_Report.xls
EX-32 - EXHIBIT 32.1 - LIQUIDMETAL TECHNOLOGIES INCex32-1.htm
EX-31 - EXHIBIT 31.2 - LIQUIDMETAL TECHNOLOGIES INCex31-2.htm
EX-31 - EXHIBIT 31.1 - LIQUIDMETAL TECHNOLOGIES INCex31-1.htm
EX-32 - EXHIBIT 32.2 - LIQUIDMETAL TECHNOLOGIES INCex32-2.htm

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

 

FORM 10-Q

 

 

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the quarterly period ended September 30, 2013

 

 

 

OR

 

 

 

 

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

For the transition period from          to         

 

Commission File No001-31332


LIQUIDMETAL TECHNOLOGIES, INC.

 (Exact name of Registrant as specified in its charter)

 

Delaware

 

33-0264467

(State or other jurisdiction of

 

(I.R.S. Employer

incorporation or organization)

 

Identification No.)

 

30452 Esperanza

Rancho Santa Margarita, CA 92688

(Address of principal executive offices, zip code)

 

Registrant’s telephone number, including area code: (949) 635-2100 


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.         

Yes      No  

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such

files). 

Yes      No 

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer 

 

Accelerated filer 

 

Non-accelerated filer 

Smaller reporting company 

 

(Do not check if a smaller reporting company)

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act). 

Yes       No  

 

The number of common shares outstanding as of October 31, 2013 was 373,040,523.

 

 
 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.
FORM 10-Q
FOR THE QUARTER ENDED
September 30, 2013



FORWARD-LOOKING INFORMATION

 

This Quarterly Report on Form 10-Q of Liquidmetal Technologies, Inc. contains “forward-looking statements” that may state our management’s plans, future events, objectives, current expectations, estimates, forecasts, assumptions or projections about the company and its business. Any statement in this report that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believes,” “estimates,” “projects,” “expects,” “intends,” “may,” “anticipates,” “plans,” “seeks,” and similar expressions identify forward-looking statements. Forward-looking statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results. These statements are not guarantees of future performance, and undue reliance should not be placed on these statements. It is important to note that our actual results could differ materially from what is expressed in our forward-looking statements due to the risk factors described in the section of our Annual Report on Form 10-K for the year ended December 31, 2012 entitled “Risk Factors,” as well as the following risks and uncertainties:

 

 

Our ability to fund our operations in the short and long-term through financing transactions on terms acceptable to us, or at all;

 

Our history of operating losses and the uncertainty surrounding our ability to achieve or sustain profitability;

 

Our limited history of developing and selling products made from our bulk amorphous alloys;

 

Lengthy customer adoption cycles and unpredictable customer adoption practices;

 

Our ability to identify, develop, and commercialize new product applications for our technology;

 

Competition from current suppliers of incumbent materials or producers of competing products;

 

Our ability to identify, consummate, and/or integrate strategic partnerships;

 

The potential for manufacturing problems or delays; and

 

Potential difficulties associated with protecting or expanding our intellectual property position.

  

We undertake no obligation to update publicly any forward-looking statements, whether as a result of new information, future events or otherwise.

 

 
2

 

  

TABLE OF CONTENTS

       
         

PART I - Financial Information

       
         

Item 1 – Financial Statements

    4  

Consolidated Balance Sheets

       

Consolidated Statements of Operations and Comprehensive Loss

       

Consolidated Statement of Shareholders’ Deficit

       

Consolidated Statements of Cash Flows

       

Notes to Consolidated Financial Statements

       
         

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

    18  
         

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

    23  
         

Item 4 – Controls and Procedures

    23  
         

PART II – Other Information

       
         

Item 1 – Legal Proceedings

    25  
         

Item 1A – Risk Factors

    25  
         

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

    25  
         

Item 3 – Defaults Upon Senior Securities

    25  
         

Item 4 – Mine Safety Disclosures

    25  
         

Item 5 – Other Information

    25  
         

Item 6 – Exhibits

    26  
         

Signatures

    27  

 

 
3

 

 

PART I

FINANCIAL INFORMATION

Item 1 – Financial Statements

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED BALANCE SHEETS

(in thousands, except par value and share data)

 

   

September 30,

2013

   

December 31,

2012

 
   

(Unaudited)

   

(Audited)

 

ASSETS

               
                 

Current assets:

               

Cash

  $ 3,023     $ 7,162  

Trade accounts receivable, net of allowance for doubtful accounts of $3 and $11, respectively

    431       64  

Prepaid expenses and other current assets

    548       689  

Total current assets

  $ 4,002     $ 7,915  

Property and equipment, net

    265       161  

Patents and trademarks, net

    792       869  

Other assets

    28       28  

Total assets

  $ 5,087     $ 8,973  
                 

LIABILITIES AND SHAREHOLDERS' DEFICIT

               
                 

Current liabilities:

               

Accounts payable

    243       154  

Accrued liabilities

    704       248  

Accrued dividends

    -       222  

Convertible notes, net of debt discount of $0 and $4,635, respectively

    -       2,365  

Embedded conversion feature liabilities on convertible notes

    -       3,934  

Total current liabilities

  $ 947     $ 6,923  
                 

Long-term liabilities:

               

Warrant liabilities

    4,481       2,766  

Other long-term liabilities

    856       856  

Total liabilities

  $ 6,284     $ 10,545  
                 

Shareholders' deficit:

               

Convertible, redeemable Series A Preferred Stock, $0.001 par value; 10,000,000 shares authorized; 0 and 506,936 shares issued and outstanding at September 30, 2013 and December 31, 2012, respectively

    -       -  

Common stock, $0.001 par value; 500,000,000 shares and 400,000,000 authorized at September 30, 2013 and December 31, 2012, respectively; 373,040,523 and 242,074,324 shares issued and outstanding at September 30, 2013 and December 31, 2012, respectively

    373       242  

Warrants

    18,179       18,179  

Additional paid-in capital

    182,304       169,891  

Accumulated deficit

    (202,013 )     (189,884 )

Non-controlling interest in subsidiary

    (40 )     -  

Total shareholders' deficit

    (1,197 )     (1,572 )

Total liabilities and shareholders' deficit

  $ 5,087     $ 8,973  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
4

 

  

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF OPERATIONS and COMPREHENSIVE LOSS

(in thousands, except share and per share data)

(unaudited)

 

 

   

For the Three Months Ended September 30,

   

For the Nine Months Ended September 30,

 
   

2013

   

2012

   

2013

   

2012

 
                                 

Revenue

                               

Products

  $ 456     $ 80     $ 721     $ 471  

Licensing and royalties

    -       27       7       46  

Total revenue

    456       107       728       517  
                                 

Cost of sales

    396       73       589       256  

Gross profit

    60       34       139       261  
                                 

Operating expenses

                               

Selling, marketing, general and administrative

    1,213       1,372       3,735       3,338  

Research and development

    368       217       829       616  

Manufacturing contract costs

    -       -       -       6,300  

Total operating expenses

    1,581       1,589       4,564       10,254  

Operating loss

    (1,521 )     (1,555 )     (4,425 )     (9,993 )
                                 

Change in value of warrants, gain (loss)

    (2,511 )     4,184       (1,715 )     4,010  

Change in value of embedded conversion feature liabilities, gain (loss)

    (2,435 )     2,785       621       2,785  

Debt discount amortization expense

    (361 )     (6,247 )     (6,504 )     (6,247 )

Financing costs

    -       -       -       (1,355 )

Interest expense

    (21 )     (240 )     (242 )     (258 )

Interest income

    1       10       5       18  

Gain on extinguishment of debt (Note 7)

    91       -       91       -  
                                 

Net loss

    (6,757 )     (1,063 )     (12,169 )     (11,040 )

Net loss attributable to non-controlling interest

    32       -       40       -  

Net loss and comprehensive loss attributable to Liquidmetal Technologies shareholders

  $ (6,725 )   $ (1,063 )   $ (12,129 )   $ (11,040 )
                                 

Net loss per common share attributable to Liquidmetal Technologies shareholders, basic and diluted

  $ (0.02 )   $ (0.01 )   $ (0.04 )   $ (0.06 )

Number of weighted average shares - basic and diluted

    372,840,523       195,275,681       330,329,312       173,544,833  

 

  

 

The accompanying notes are an integral part of the consolidated financial statements.

 

 
5

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENT OF SHAREHOLDERS' DEFICIT

For the Nine Months Ended September 30, 2013

(in thousands, except share data)

(unaudited)

 

   

Preferred Shares

   

Common

Shares

   

Common

Stock

   

Warrants

part of Additional

Paid-in

Capital

   

Additional

Paid-in

Capital

   

Accumulated

Deficit

   

Non

Controlling Interest

   

Total

 

Balance, December 31, 2012

    506,936       242,074,324     $ 242     $ 18,179     $ 169,891     $ (189,884 )   $ -     $ (1,572 )
                                                                 

Conversion of preferred stock

    (506,936 )     16,896,070       17               (17 )                     -  

Common stock issuance

            114,070,129       114               11,766                       11,880  

Stock option exercises

                                    74                       74  

Stock-based compensation

                                    134                       134  

Restricted stock issued to officer

                                    234                       234  

Dividend distribution

                                    222                       222  

Net loss

                                            (12,129 )     (40 )     (12,169 )
                                                                 

Balance, September 30, 2013

    -       373,040,523     $ 373     $ 18,179     $ 182,304     $ (202,013 )   $ (40 )   $ (1,197 )
 

  

The accompanying notes are an integral part of the consolidated financial statements.

 

 
6

 

  

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES

CONSOLIDATED STATEMENTS OF CASH FLOWS

(in thousands, except per share data)

(unaudited)

 

   

Nine Months Ended September 30,

 
   

2013

   

2012

 
                 

Operating activities:

               

Net loss

  $ (12,169 )   $ (11,040 )
                 

Adjustments to reconcile net loss to net cash provided (used in) operating activities:

               

Depreciation and amortization

    158       138  

Bad debt expense

    11       -  

Stock-based compensation

    134       71  

Restricted stock compensation issued to officer

    234       233  

Loss (Gain) from change in value of warrants

    1,715       (4,010 )

Gain from change in value of embedded conversion feature liabilities

    (621 )     (2,785 )

Gain on extinguishment of debt (Note 7)

    (91 )     -  

Manufacturing contract costs

    -       6,300  

Financing costs

    -       1,355  

Debt discount amortization

    6,504       6,247  

Non -cash interest

    242       240  
                 

Changes in operating assets and liabilities:

               

Trade accounts receivable

    (378 )     143  

Prepaid expenses and other current assets

    (127 )     106  

Other assets

    -       20  

Accounts payable and accrued expenses

    360       (854 )

Deferred revenue

    -       (67 )

Other liabilities

    -       247  

Net cash used in operating activities

    (4,028 )     (3,656 )
                 

Investing Activities:

               

Purchases of property and equipment

    (172 )     (29 )

Investment in patents and trademarks

    (13 )     (35 )
                 

Net cash used in investing activities

    (185 )     (64 )
                 

Financing Activities:

               

Proceeds from short-term debt

    -       1,050  

Repayment of short-term debt

    -       (2,762 )

Payment of debt issuance costs

    -       (1,033 )

Proceeds from exercise of stock options

    74       44  

Proceeds from convertible debt issuance

    -       12,000  

Proceeds from stock issuance

    -       3,000  

Net cash provided by financing activities

    74       12,299  
                 

Net increase (decrease) in cash

    (4,139 )     8,579  
                 

Cash at beginning of period

    7,162       122  

Cash at end of period

  $ 3,023     $ 8,701  
                 

Supplemental Schedule of Non-Cash Investing and Financing Activities:

               

Offering cost in relation to common stock issuance

    -       2,905  

Cashless exercise of warrants

    -       6,259  

Pre-installment payment of convertible debt and interest through common stock issuance

    7,187       1,240  

Dividends paid in common stock upon preferred stock conversion

    222       -  

 

The accompanying notes are an integral part of the consolidated financial statements. 

 

 
7

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

1. Description of Business

 

Liquidmetal Technologies, Inc. (the “Company”) is a materials technology company that develops and commercializes products made from amorphous alloys. The Company’s family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. The Company designs, develops and sells products and components from bulk amorphous alloys to customers in various industries. The Company also partners with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

 

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that the Company believes will make them preferable to other materials in a variety of applications. The amorphous atomic structure of the Company’s alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. The Company believes these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, the Company believes these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

The Company’s revenues are derived from i) selling bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, iii) product licensing and royalty revenue, and iv) research and development revenue.

 

2. Basis of Presentation and Recent Accounting Pronouncements

 

The accompanying unaudited interim consolidated financial statements as of and for the three and nine months ended September 30, 2013 have been prepared in accordance with accounting principles generally accepted in the United States of America (“generally accepted accounting principles”) for interim financial information and with the instructions to Form 10-Q. Accordingly, they do not include all of the information and notes required by generally accepted accounting principles for complete financial statements. In the opinion of management, all adjustments (consisting only of normal recurring accruals) considered necessary for a fair presentation have been included. All intercompany balances and transactions have been eliminated in consolidation. Operating results for the three and nine months ended September 30, 2013 are not necessarily indicative of the results that may be expected for any future periods or the year ending December 31, 2013. The accompanying unaudited consolidated financial statements should be read in conjunction with the Company's 2012 Annual Report on Form 10-K filed with the Securities and Exchange Commission on February 26, 2013.

 

Revenue Recognition

 

Revenue is recognized pursuant to applicable accounting standards including FASB ASC Topic 605 (“ASC 605”), Revenue Recognition. ASC 605 summarizes certain points of the SEC staff’s views in applying generally accepted accounting principles to revenue recognition in financial statements and provides guidance on revenue recognition issues in the absence of authoritative literature addressing a specific arrangement or a specific industry.

 

The Company’s revenue recognition policy complies with the requirements of ASC 605. Revenue is recognized when (i) persuasive evidence of an arrangement exists, (ii) delivery has occurred, (iii) the sales price is fixed or determinable, (iv) collection is probable and (v) all obligations have been substantially performed pursuant to the terms of the arrangement. Revenues are derived primarily from the sales and prototyping of Liquidmetal mold and bulk alloys as well as licensing and royalties for the use of the Liquidmetal brand and bulk Liquidmetal alloys. Revenue is deferred and included in liabilities when the Company receives cash in advance for goods not yet delivered or if the licensing term has not begun.

 

License revenue arrangements in general provide for the grant of certain intellectual property rights for patented technologies owned or controlled by the Company. These rights typically include the grant of an exclusive or non-exclusive right to manufacture and/or sell products covered by patented technologies owned or controlled by the Company. The intellectual property rights granted may be perpetual in nature, extending until the expiration of the related patents, or can be granted for a defined period of time.

 

Licensing revenues that are one time fees upon the granting of the license are recognized when (i) the license term begins in a manner consistent with the nature of the transaction and the earnings process, (ii) collectability is reasonably assured or upon receipt of an upfront fee, and (iii) all other revenue recognition criteria have been met. Pursuant to the terms of these types of licensing agreements, the Company has no further obligation with respect to the grant of the license once the license is granted. Licensing revenues that are related to royalties are recognized as the royalties are earned over the related period.

  

 
8

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

Fair Value Measurements

 

The estimated fair values of amounts reported in the consolidated financial statements have been determined using available market information and valuation methodologies, as applicable. The fair value of cash, trade receivables, prepaid expenses and other current assets, accounts payable, and accrued liabilities approximate their carrying value due to their short maturities. The fair value of non-current assets and liabilities approximate their carrying value unless otherwise stated. The carrying amounts reported for debt obligations approximate fair value due to the effective interest rate of these obligations reflecting the Company’s current borrowing rate.

 

Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. Entities are required to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value based upon the following fair value hierarchy:

 

Level 1 —

Quoted prices in active markets for identical assets or liabilities;

 

Level 2 —

Observable inputs other than Level 1 prices, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; or other inputs that are observable or can be corroborated by observable market data for substantially the full term of the assets or liabilities; and

 

Level 3 —

Unobservable inputs that are supported by little or no market activity and that are significant to the fair value of the assets or liabilities.

 

The Company has one Level 2 financial instrument, that being warrants that are recorded at fair value on a periodic basis. Warrants are evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such warrants is estimated using the Black-Scholes option pricing model. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815 (see note 8).

 

The Company had one Level 3 financial instrument during the nine-months ended September 30, 2013, that being an embedded derivative that is recorded at fair value on a periodic basis. The embedded derivative is evaluated under the hierarchy of FASB ASC Subtopic 480-10, FASB ASC Paragraph 815-25-1 and FASB ASC Subparagraph 815-10-15-74 addressing embedded derivatives. The fair value of such embedded derivative is estimated using the Monte Carlo simulation model. The foregoing embedded derivative had certain anti-dilution and exercise price reset provisions which qualified the embedded derivative to be classified as a liability under FASB ASC 815. Upon the final settlement of the Senior Convertible Notes, this liability was extinguished as the underlying conversion option had been executed. As such, the fair value of the liability was reduced to zero upon conversion (see note 7).

 

As of September 30, 2013, the following table represents the Company’s fair value hierarchy for items that are required to be measured at fair value on a recurring basis:

 

 

   

Fair Value

   

Level 1

   

Level 2

   

Level 3

 
                                 

Warrant liabilities

    4,481       -     $ 4,481       -  

 

 

Recent Accounting Pronouncements

 

Offsetting Assets and Liabilities

 

In December 2011 and December 2012, the FASB issued accounting standards updates modifying the disclosure requirements about the nature of an entity's rights of offsetting assets and liabilities in the consolidated balance sheet under master netting agreements and related arrangements associated with financial and derivative instruments. The guidance requires increased disclosure of the gross and net recognized assets and liabilities, collateral positions and narrative descriptions of setoff rights. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

Presentation of Items Reclassified out of Accumulated Other Comprehensive Income

 

In February 2013, the FASB issued an accounting standards update which requires disclosure related to items reclassified out of accumulated other comprehensive income (AOCI). The guidance requires entities to present separately, for each component of other comprehensive income (OCI), current period reclassifications and the remainder of the current-period OCI. In addition, for certain current period reclassifications, an entity is required to disclose the effect of the item reclassified out of AOCI on the respective line item of net income. The adoption of this pronouncement did not have a material impact on the Company’s Consolidated Financial Statements and accompanying disclosures.

 

 

 
9

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

Joint and Several Liabilities

 

In February 2013, the FASB issued an accounting standard update which modifies the requirements for the recognition, measurement, and disclosure of obligations resulting from joint and several liability arrangements for which the total amount of the obligation is fixed at the reporting date. The guidance requires companies to measure these obligations as the sum of the amount the company has agreed with co-obligors to pay and any additional amount it expects to pay on behalf of one or more co-obligors. This guidance is effective for all fiscal years, and interim periods within those years, beginning after December 31, 2013. The Company does not expect this guidance to have a material impact on the Company’s Consolidated Financial Statements.

 

Presentation of Unrecognized Tax Benefits

 

In July 2013, the FASB issued an accounting standards update which will require that an unrecognized tax benefit be presented on the balance sheet as a reduction of a deferred tax asset for a net operating loss ("NOL") or tax credit carryforward under certain circumstances. The guidance is effective for all fiscal years, and interim periods within those years, beginning December 15, 2013.  The Company does not expect this guidance to have a material impact on the Company’s Consolidated Financial Statements.

 

 

3. Significant Transactions

 

July 2012 Private Placement

 

On July 2, 2012, the Company entered into a private placement transaction (the “July 2012 Private Placement”) pursuant to which the Company issued $12,000 in principal amount of senior convertible notes that were due on September 1, 2013. The notes were convertible into shares of the Company’s common stock at a conversion price of $0.352 per share. The notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012. Each monthly installment payment may have been made in cash, shares of the Company’s common stock, or a combination thereof. If paid in shares, such shares were valued at the lower of (i) the then applicable conversion price or (ii) a price that was 87.5% of the arithmetic average of the ten (or in some cases fewer) lowest weighted average prices of the Company’s common stock during the twenty trading day period ending two trading days before the payment date or the date on which the Company elected to pay in shares, whichever was lower. As of July 17, 2013, the Company had issued 163,641,547 shares of common stock in full satisfaction of notes (see note 7).

 

As a part of the July 2012 Private Placement, the Company issued warrants to purchase 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share, and such warrants first became exercisable on January 2, 2013 which was six months after the issuance date thereof. In the event that the Company issues or sells shares of the Company’s common stock at a price per share that is less than the exercise price then in effect, the exercise price of the warrants will be reduced based on a weighted-average formula. In addition, on the two year anniversary of the issuance date, the then applicable exercise price will be reset to equal the lesser of (i) the then current exercise price or (ii) 87.5% of the arithmetic average of the ten lowest weighted average prices of the common stock during the twenty trading day period ending two trading days immediately preceding the reset date. All of the warrants will expire on July 2, 2017 (see note 8).

 

June 2012 Visser MTA Agreement

 

On June 1, 2012, the Company entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

Under the manufacturing and service component of the Visser MTA Agreement, the Company has agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Further, the Company has agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all intellectual property rights held by the Company. Visser’s use of such sublicense is limited to the exercise of its manufacturing rights, provided that such limitation will terminate if the Company fails to comply with certain technical, administrative, and research and development support obligations set forth in the transaction agreements with Visser and such failure is not cured within 60 days. In addition, Visser has a right of first refusal over any proposed transfer by the Company of its technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.

 

Under the financing component of the Visser MTA Agreement, the Company issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, (ii) warrants to purchase 15,000,000 shares of common stock (subsequently increased to 18,539,762 shares under the anti-dilution provision of the warrants, see note 8) at an original exercise price of $0.22 per share (subsequently reduced to $0.18 per share under the anti-dilution provision of the warrants, see note 8) which expire on June 1, 2017 and (iii) a secured convertible promissory note (the “Promissory Note”) in the aggregate principal amount of up to $2,000 which was convertible into shares of common stock at a conversion rate of $0.22 per share. The Promissory Note was issued pursuant to a $2,000 loan facility made available by Visser, but no borrowings were made by the Company under this loan facility, and the deadline for making borrowings under the facility expired on November 15, 2012. All of the shares of common stock issuable upon exercise of the warrants are subject to a lock-up period through December 31, 2016.

 

 

 
10

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

The warrants under the Visser MTA Agreement contain certain anti-dilution and exercise price reset provisions which results in liability accounting under FASB ASC 815 (see note 8). In relation to the financing cost component to the Visser transaction, the Company performed a prorated allocation of the fair value of the warrants on the Promissory Note and the common stock based on their relative fair values. The Company capitalized deferred financing costs in relation to the Promissory Note totaling $1,789 and offset additional paid-in capital for $2,905 in relation to the warrants. The Company assessed the value of the deferred financing costs as of the quarter ended June 30, 2012 and determined that the value was impaired due to the limitations on the Company’s ability to request advances as discussed above. Therefore, the Company expensed the deferred financing costs totaling $1,355 as of the quarter ended June 30, 2012.

 

In connection with the Visser MTA Agreement, the Company performed a valuation analysis of the manufacturing service and financing components of the Visser MTA Agreement as part of the bundled contract. The Company has assessed and determined that while these components may have market values on a standalone basis, the values of the manufacturing component and sublicense component were deemed immaterial for accounting purposes. Further, the Company’s weighted average market stock price was approximately $0.31 per share at the time of share issuances to Visser. As the actual share purchase price related to the financing component of the Visser MTA Agreement was $0.10 per share, the $0.21 per share difference was treated as manufacturing contract costs and $6,300 was expensed as operating expenses during the second quarter ended June 30, 2012.

 

On January 17, 2012, February 27, 2012, March 28, 2012 and April 25, 2012, the Company issued 8% unsecured, bridge promissory notes to Visser that were due upon demand in the amounts of $200, $200, $350 and $300, respectively. The aggregate principal amount of $1,050 and accrued interest under the bridge promissory notes were all paid off on June 1, 2012 by utilizing a portion of the proceeds received under the financing component of the Visser MTA Agreement.

 

In November 2013, the Company and Visser entered into arbitration proceedings to resolve disputes associated with the Visser MTA Agreement (see note 15).

 

Apple License Transaction

 

On August 5, 2010, the Company entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) the Company contributed substantially all of its intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to the Company a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required the Company to complete a statement of work related to the exchange of Liquidmetal intellectual property information. The Company recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

 

Under the agreements relating to the license transaction with Apple, the Company is obligated to contribute all intellectual property that it developed through February 2012 (and subsequently amended to extend through February 2014) to CIP. The Company is also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, the Company and Engel Austria Gmbh (“Engel”) entered into a Supply and License Agreement for a five year term whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to the Company’s licensees. Since that time, the Company has delivered to Engel a customized induction melt system with a configuration for a standard injection-molding machine that that can be commercially supplied and supported by Engel to enable future licensees to manufacture Liquidmetal components.  As of September 30, 2013, no revenues have been recognized under this agreement. 

  

On November 16, 2011, the Company and Materion Brush Inc. (“Materion”) entered into a Development Agreement to evaluate, analyze and develop amorphous alloy feedstock to be supplied in commercial quantities.  Further, on June 17, 2012, the Company entered into a Sales Representation Agreement with Materion whereby Materion shall promote the sale of Liquidmetal’s products for certain commissions.  This agreement is for a two year initial term with annual, automatic renewals. To date, there have been no commission payments related to this agreement.

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between Liquidmetal Technologies and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. The Company owns 79% of the outstanding common stock in Liquidmetal Golf.

 

In June 2003, the Company entered into an exclusive license agreement with LLPG, Inc. (“LLPG”). Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

 

 
11

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

In March 2009, the Company entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to the Company’s technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and the Company’s license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. The Company will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

 

4. Liquidity and Capital Resources

 

The Company’s cash used in operations was $4,028 for the nine months ended September 30, 2013, cash used in investing activities was $185 for the nine months ended September 30, 2013, and cash provided by financing activities was $74 for the nine months ended September 30, 2013. As of September 30, 2013, the Company’s cash balance was $3,023.

 

On July 2, 2012, the Company entered into the July 2012 Private Placement pursuant to which it issued $12,000 in principal amount of Senior Convertible Notes that were due on September 1, 2013 and warrants to the purchasers of such Senior Convertible Notes giving such purchasers the right to purchase up to an aggregate of 18,750,000 shares of the Company’s common stock at an exercise price of $0.384 per share (see note 3). As of July 17, 2013, the notes under the July 2012 Private Placement were paid off in full through issuance of common stock (see note 7).

 

The Company anticipates that its current capital resources, when considering expected losses from operations, will be sufficient to fund the Company’s operations through the end of the first quarter of 2014. The Company has a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, Visser’s ability to produce the Company’s products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of the Company’s control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. Such factors will likely require that the Company raise additional funds to support the Company’s operations beyond the first quarter of 2014. There is no assurance that the Company will be able to raise such additional funds on acceptable terms, if at all. If the Company raises additional funds by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, the Company may be required to alter or reduce the scope of the Company’s operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about the Company’s ability to continue as a going concern.

 

On November 8, 2013, the Company entered into a Common Stock Purchase Agreement that will allow the company to raise up to $20 million through periodic issuances of common stock over a three year period (see note 15).

 

5. Prepaid Expenses and Other Current Assets

 

Prepaid expenses and other current assets totaled $548 and $689 as of September 30, 2013 and December 31, 2012, respectively and primarily consists of prepaid invoices and insurance premiums that will be reclassified to expense as shipments are made to customers or services are provided. Deferred debt issuance costs are also included in prepaid expenses and other current assets and were $0 as of September 30, 2013, reflecting $15 and $360 of amortization expensed during the three and nine months ended September 30, 2013, respectively. Deferred debt issuance costs were $399 as of December 31, 2012.

 

6. Patents and Trademarks, net

 

Net patents and trademarks totaled $792 and $869 as of September 30, 2013 and December 31, 2012, respectively, and it primarily consists of purchased patent rights and internally developed patents.

 

Purchased patent rights represent the exclusive right to commercialize the bulk amorphous alloy and other amorphous alloy technology acquired from California Institute of Technology (“Caltech”), through a license agreement with Caltech and other institutions. All fees and other amounts payable by the Company for these rights and licenses have been paid or accrued in full, and no further royalties, license fees or other amounts will be payable in the future under the license agreement.

     

In addition to the purchased and licensed patents, the Company has internally developed patents. Internally developed patents include legal and registration costs incurred to obtain the respective patents. The Company currently holds various patents and numerous pending patent applications in the United States, as well as numerous foreign counterparts to these patents outside of the United States.

 

The Company amortizes capitalized patents and trademarks over an average of 10 to 17 year periods. Amortization expense for patents and trademarks was $25 and $90 for the three and nine months ended September 30, 2013, respectively. Amortization expense for patents and trademarks was $32 and $101 for the three and nine months ended September 30, 2012, respectively.

 

 

 
12

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

 

7. Convertible Note and Embedded Conversion Feature Liability and Gain on Extinguishment of Debt

 

On July 2, 2012, the Company entered into the July 2012 Private Placement pursuant to which it issued $12,000 in principal amount of Senior Convertible Notes that were due on September 1, 2013 (see note 3). Pursuant to ASC 815-40, due to the anti-dilution provision of the notes, the conversion feature of the notes is not indexed to the Company’s owned stock and should be bifurcated and recognized as a derivative liability in the consolidated balance sheets and measured at fair value. The notes bore interest at 8% per annum and were payable in twelve equal monthly installments of principal and interest beginning on October 1, 2012.

 

The embedded conversion feature liability and warrants issued in connection with the Senior Convertible Notes were valued utilizing the Monte Carlo simulation and Black Sholes pricing model at $8,865 and $5,053, respectively, totaling $13,918 as of July 2, 2012. $12,000 of this total was recorded as debt discount and the excess of the face value of the embedded conversion feature liability and warrants of $1,918 was booked to debt discount amortization on July 2, 2012.

 

Pursuant to the terms of the Senior Convertible Notes, the Company opted to pay the first eleven monthly installment payments due prior to June 30, 2013 with shares of the Company’s common stock, with settlement of the final installment during July 2013. Upon final settlement, the Company had issued 163,641,547 shares of common stock, at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest.

 

Interest expense on the Senior Convertible Notes was $21 and $242 for the three and nine months ended September 30, 2013, respectively, and the balance on the notes (net of debt discount) was $0 as of September 30, 2013 as follows:

  

   

Convertible Note

   

Debt Discount

   

Net Total

 
                         

Beginning Balance - December 31, 2012

  $ 7,000     $ (4,635 )   $ 2,365  

Installment Payments in Shares

    (7,000 )     -       (7,000 )

Amortization

    -       4,181       4,181  

Write-off associated with convertible debt extinguishment

    -       454       454  

Ending Balance - September 30, 2013

  $ -     $ -     $ -  

 

On July 17, 2013, the Company and each of the holders of the Senior Convertible Notes due on September 1, 2013, in the original aggregate principal amount of $12,000, agreed to cause all remaining principal and interest under the Senior Convertible Notes to be converted into an aggregate of 18,679,584 shares of the Company’s common stock in full satisfaction of the notes.  As a result of this conversion, the Senior Convertible Notes were paid off in full and are no longer outstanding as of the conversion date. As the final conversion occurred pursuant to terms that were not included in the original terms of the Senior Convertible Notes, the Company recorded a gain on extinguishment of debt in the amount of $91 which consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes.

 

8. Warrant Liability

 

Pursuant to FASB ASC 815, the Company is required to report the value of certain warrants as a liability at fair value and record the changes in the fair value of the warrant liabilities as a gain or loss in its statement of operations due to the price-based anti-dilution rights of the warrants.

 

During June 2012, the Company issued warrants to purchase a total of 15,000,000 shares of common stock to Visser under the Visser MTA Agreement (see note 3). These warrants had an original exercise price of $0.22 per share and expire on June 1, 2017 and were originally valued at $4,260. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As a result of paying down our convertible notes with common stock, which resulted in an anti-dilution impact, the exercise price of these warrants was reduced to $0.21 as of December 31, 2012 and $0.18 as of September 30, 2013. In addition, the number of shares to be issued under the warrants as a result of the anti-dilution provision increased to 15,776,632 and 18,539,762 as of December 31, 2012 and September 30, 2013, respectively. As of September 30, 2013, these warrants were valued at $2,323 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 3.67 years, (ii) volatility of 148%, (iii) risk-free interest rate of 1.39%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the three and nine months ended September 30, 2013 was a loss of $1,318 and $1,063, respectively.

 

On July 2, 2012, the Company issued warrants to purchase a total of 18,750,000 shares of common stock related to the July 2012 Private Placement (see note 3). These warrants have an exercise price of $0.384 per share and expire on July 2, 2017 and were originally valued at $5,053. The foregoing warrants have certain anti-dilution and exercise price reset provisions which qualify the warrants to be classified as a liability under FASB ASC 815. As of September 30, 2013, these warrants were valued at $2,158 under the Black Sholes valuation model utilizing the following assumptions: (i) expected life of 3.75 years, (ii) volatility of 147%, (iii) risk-free interest rate of 1.39%, and (iv) dividend rate of 0. The change in warrant value for these warrants for the three and nine months ended September 30, 2013 was a loss of $1,193 and $652, respectively.

  

 
13

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

The following table summarizes the change in the Company’s warrant liability as of September 30, 2013:

  

   

Visser MTA

   

July 2, 2012

         
   

Agreement

   

Private Placement

   

Total

 
                         

Beginning Balance - December 31, 2012

  $ 1,260     $ 1,506       2,766  

Change in value of warrant liability, loss

    1,063       652       1,715  

Ending Balance - September 30, 2013

  $ 2,323     $ 2,158     $ 4,481  

 

 

 

The Company had warrants to purchase 67,069,319 and 64,306,189 shares of common stock outstanding as of September 30, 2013 and December 31, 2012, respectively. Of these, warrants to purchase 37,289,762 shares were valued and classified as a liability under FASB ASC 815 (see note 11).

 

9. Other Long-term Liabilities  

 

Other long-term liabilities balance was $856 as of September 30, 2013 and December 31, 2012, and consists of long-term, aged payables to vendors, individuals, and other third parties that have been outstanding for more than 5 years. The Company is in the process of researching and resolving the balances for settlement and/or write-off.

 

10. Stock Compensation Plan

 

Under the Company’s 2002 Equity Incentive Plan which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries, the Company granted options to purchase the Company’s common stock. All options granted under this plan had exercise prices that were equal to the fair market value on the date of grant. During the nine months ended September 30, 2013, the Company did not grant any options under this plan. The Company had outstanding grants of options to purchase 2,720,000 and 3,392,000 shares of the Company’s common stock as of September 30, 2013 and December 31, 2012, respectively.

 

On June 28, 2012, the Company adopted the 2012 Equity Incentive Plan, with the approval of the shareholders, which provided for the grant of stock options to officers, employees, consultants and directors of the Company and its subsidiaries. All options granted under this plan had exercise prices that were equal to the fair market value on the dates of grant. During the nine months ended September 30, 2013, the Company granted options to purchase 12,867,500 shares of common stock. Under this plan, the Company had grants of options to purchase 12,677,500 and 330,000 shares of the Company’s common stock as of September 30, 2013, and December 31, 2012, respectively.

 

11. Shareholders’ Deficit

 

Common stock

 

In June 2012, the Company issued 30,000,000 shares of common stock to Visser in connection with the Visser MTA Agreement (see note 3).

 

Pursuant to the terms of the Company’s Senior Convertible Notes issued in the July 2012 Private Placement, the Company opted to pay the twelve monthly installment payments prior to the September 1, 2013 maturity date with shares of the Company’s common stock. Upon final settlement, the Company had issued 163,641,547 shares of common stock at a weighted average conversion price of $0.0774, for the twelve installment payments due under the notes, consisting of $12,000 principal and $680 of interest (see notes 3 and 7).

 

During the nine months ended September 30, 2013, the holders of the Company’s Series A Preferred Stock converted all of the outstanding 506,936 shares of preferred stock into 16,896,070 shares of the Company’s common stock (see “Preferred stock” below). After giving effect to such conversion, the Company has no shares of preferred stock outstanding.

 

 
14

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(unaudited)

 

 

On February 28, 2013, the Company’s stockholders approved an amendment to the Certificate of Incorporation of the Company increasing the number of authorized shares of common stock from 400 million shares to 500 million shares.

 

On October 24, 2013, the Company’s stockholders approved an amendment to the Company’s Certificate of Incorporation increasing the number of authorized shares of common stock from 500 million shares to 700 million shares (see note 15).

 

 

Preferred stock

  

On May 1, 2009, pursuant to a Securities Purchase and Exchange Agreement, the Company issued 500,000 shares of convertible Series A-1 Preferred Stock with an original issue price of $5.00 per share and 2,625,000 shares of Series A-2 Preferred Stock with an original issue price of $5.00 per share as part of a financing transaction. In October 2009, the Company entered into an agreement with various investors to issue 180,000 shares of Series A-1 Preferred Stock with identical terms as the Series A-1 Preferred Stock issued on May 1, 2009.

 

The Series A Preferred Stock and any accrued and unpaid dividends thereon was convertible, at the option of the holders of the Series A Preferred Stock, into common stock of the Company at a conversion price of $.10 per share in the case of the Series A-1 Preferred Stock and a conversion price of $.22 per share in the case of the Series A-2 Preferred Stock (in both cases subject to adjustments for any stock dividends, splits, combinations and similar events).

 

As of December 31, 2012, the Company had 506,936 shares of Series A Preferred Stock outstanding, consisting of 105,231 and 401,705 shares of Series A-1 and Series A-2 Preferred Stock, respectively. Preferred stock as of December 31, 2012 was $0 due to an insignificant balance, and accrued dividends on the Series A Preferred Stock as of December 31, 2012 were $222.

 

During the nine months ended September 30, 2013, all of the holders of the Company’s Series A Preferred Stock converted all of the outstanding shares of preferred stock and accrued dividends into 16,896,070 shares of the Company’s common stock. Therefore, as of September 30, 2013, the Company no longer had any outstanding Preferred Stock and the related $222 accrued dividends were reclassified to additional paid-in capital as of September 30, 2013.

 

Warrants

 

In connection with the Series A Preferred Stock issuances, warrants to purchase 29,779,557 shares of the Company’s common stock were outstanding as of December 31, 2012 and September 30, 2013. These warrants do not contain anti-dilution provisions and are reflected as equity as they do not meet the criteria under FASB ASC 815 for liability treatment. Warrants classified as equity were recorded at $18,179 as of December 31, 2012 and September 30, 2013. All of such warrants have an exercise price of $0.49 and expire on July 15, 2015.

 

Non-Controlling Interest

 

The Company’s Liquidmetal Golf subsidiary has the exclusive right and license to utilize the Company’s Liquidmetal alloy technology for purposes of golf equipment applications. Liquidmetal Technologies owns 79% of the outstanding common stock in Liquidmetal Golf. As of September 30, 2013, non-controlling interest was a deficit of $40. The December 31, 2012 non-controlling interest balance was immaterial and not recorded.

 

12. Loss Per Common Share

 

Basic earnings per share (“EPS”) is computed by dividing earnings (loss) attributable to common shareholders by the weighted average number of common shares outstanding for the periods. Diluted EPS reflects the potential dilution of securities that could share in the earnings.

 

Options to purchase 15,397,500 shares of common stock, at prices ranging from $0.08 to $2.49 per share, were outstanding at September 30, 2013, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 67,069,319 shares of common stock, with prices ranging from $0.18 to $0.49 per share, outstanding at September 30, 2013 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss.

 

Options to purchase 4,352,000 shares of common stock, at prices ranging from $0.09 to $15.00 per share, were outstanding at September 30, 2012, but were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. Warrants to purchase 63,529,557 shares of common stock, with prices ranging from $0.22 to $0.49 per share, outstanding at September 30, 2012 were not included in the computation of diluted EPS for the same period as the inclusion would have been antidilutive, given the Company’s net loss. 16,896,073 shares of common stock issuable upon conversion of the Company’s convertible preferred stock, with conversion prices of $0.10 and $0.22 per share, outstanding at September 30, 2012 were not included in the computation of diluted EPS for the same period because the inclusion would have been antidilutive, given the Company’s net loss.

 

13. Commitments and Contingencies

 

The Company leases its office and warehouse facility under a lease agreement that expires on April 30, 2016. Rent payments are subject to escalations through the end of the lease term. Rent expense was $50 and $150 for the three and nine months ended September 30, 2013, respectively. Rent expense was $50 and $150 for the three and nine months ended September 30, 2012, respectively.

 

 
15

 

 

LIQUIDMETAL TECHNOLOGIES, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
For the Nine Months Ended September 30, 2013 and 2012

(numbers in thousands, except share and per share data)

(unaudited)

 

14. Related Party Transactions

 

On August 5, 2011, the Company signed a Stock Purchase Agreement (the “Stock Purchase Agreement”) with IMG Materials Group, LLC (“IMG”), a California limited liability company which is majority owned by Mr. Kang, a former Chief Executive Officer and Chairman of the Company, to sell all of the stock of the Company’s former Chinese subsidiary, Advanced Metals Materials (“AMM”) for $720. As part of the consideration, the Company received a $200 Promissory Note due August 5, 2012, bearing an interest rate of 8% per annum. In conjunction with the Stock Purchase Agreement, the Company also entered into a license agreement (the “IMG License Agreement”) with IMG to license certain patents and technical information for the limited purpose of manufacturing certain licensed products with the Company’s existing first generation die cast machines. The IMG License Agreement granted a non-exclusive license to certain product categories, as well as an exclusive license to specific types of consumer eyewear products and obligated IMG to pay the Company a running royalty based on its sales of licensed products through August 5, 2021. The Company recognized $0 in royalty revenues from IMG during the three and nine months ended September 30, 2013.

 

On December 31, 2012, IMG and the Company signed an amendment to the IMG License Agreement whereby the $200 Promissory Note from IMG along with the accrued interest of $21 was forgiven in exchange for the return of the eyewear license to the Company. The Company accounted for this transaction as an exchange of non-monetary assets and reclassified the $221 to eyewear license fee. While the Company continues to maintain an active interest in leveraging the eyewear license for prospective opportunities in the eyewear industry from both a products and licensing perspective, the Company determined that there was insufficient historical market data on the potential license applications presently available to provide a reasonable basis to fair value the license and its period of useful life. Therefore, the Company recognized a $221 impairment loss for accounting purposes for the year ended December 31, 2012.

 

During 2012, the Company incurred $2 in legal fees to defend Mr. Kang, as the former Representative Director of our Korean subsidiary, against allegations relating to the Company’s Korean subsidiary’s involvement in customs reporting violations in South Korea that allegedly occurred in 2007 and 2008. The Company had agreed to reimburse Mr. Kang’s legal fees incurred on this issue through December 31, 2012.

 

On February 1, 2012, Mr. Tony Chung, the Company’s Chief Financial Officer, converted his 10,000 shares of Series A-1 Preferred Stock into a total of 565,344 shares of the Company’s common stock, including dividends received in the form of common stock. On June 13, 2013, Mr. Chung purchased 1,324,999 shares of Company’s common stock at an average share price of $0.078.

 

In February 2013, Mr. Abdi Mahamedi, the Company’s Chairman, converted his 58,600 shares of Series A-1 Preferred Stock and 260,710 shares of Series A-2 Preferred Stock into a total of 10,387,883 shares of the Company’s common stock, including dividends received in the form of common stock. Mr. Mahamedi is a greater-than-5% beneficial owner of the Company.

 

Mr. Thomas Steipp, the Company’s Chief Executive Officer, sold an aggregate of 400,000 shares of the common stock of the Company on August 5, 2013 pursuant to a trading plan that Mr. Steipp previously adopted under SEC Rule 10b5-1 under the Securities Exchange Act of 1934, as amended. Mr. Steipp adopted the trading plan on March 22, 2013 for the purpose of providing him with funds to satisfy certain tax liabilities as a result of the vesting on August 3, 2013 of 1,200,000 shares of Company restricted common stock held by Mr. Steipp. The restricted shares were granted to Mr. Steipp in 2010 under a previously disclosed Restricted Stock Award Agreement, dated August 3, 2010, between Mr. Steipp and the Company. The trading plan also provides for the future sale of 400,000 shares of Company common stock scheduled for August 4, 2014.

 

In September 2013, the Company entered into Change of Control Agreements with Ricardo A. Salas, the Company’s Executive Vice President, Tony Chung, the Company’s Chief Financial Officer, and certain other executive officers who are not named executive officers of the Company for SEC reporting purposes. The Change of Control Agreements provide that if the executive officer’s employment with the Company is terminated without cause during the one-year period after a change of control of the Company, then the terminated officer will receive lump sum severance compensation in an amount equal to twelve months of his then-current base salary. Under the agreements, each of the executive officers will also be entitled to the above-described severance compensation in the event he terminates his own employment within one year after a change of control because of a salary decrease or assignment to a lower-level position. In addition, upon termination, all unvested stock options related to these officers will automatically and immediately vest and shall thereafter be exercisable in accordance with the terms and provisions of the applicable award agreements.

 

The Company has an exclusive license agreement with LLPG, Inc. (“LLPG”), a corporation owned principally by Jack Chitayat, a former director of the Company. Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets.  The Company, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG.    The exclusive license agreement with LLPG expires on December 31, 2021. There were no revenues recognized from product sales and licensing fees from LLPG during 2013 and 2012.

 

On February 27, 2013, Mr. Chitayat converted his 28,928 shares of Series A-1 Preferred Stock and 109,528 shares of Series A-2 Preferred Stock into a total of 4,626,840 shares of the Company’s common stock, including dividends received in the form of common stock. Mr. Chitayat is a greater-than-5% beneficial owner of the Company.

 

On January 17, 2012, February 27, 2012, March 28, 2012 and April 25, 2012, the Company issued 8% unsecured, bridge promissory notes to Visser Precision Cast, LLC that were due upon demand in the amounts of $200, $200, $350 and $300, respectively. The aggregate principal amount of $1,050 and accrued interest under the bridge promissory notes were all paid off on June 1, 2012 by utilizing a portion of the proceeds received under the financing component of the Visser MTA Agreement (see note 3). Visser is a greater-than-5% beneficial owner of the Company.

  

 
16

 

 

15. Subsequent Event

 

Annual Meeting of Stockholders

 

On October 24, 2013, the stockholders of the Company approved an amendment to the Company’s Certificate of Incorporation to (i) increase the number of shares of common stock that the Company is authorized to issue from 500,000,000 shares to 700,000,000 shares and (ii) remove all language relating to the Company’s Series A-1 and Series A-2 Preferred Stock and the rights of the holders thereof. The amendment was filed with the Secretary of State of the State of Delaware on October 28, 2013, and is therefore effective as of October 28, 2013.

 

Arbitration with Visser

 

In November 2013, the Company and Visser entered into arbitration proceedings with the Judicial Arbiter Group in Denver, CO. Both parties have filed claims alleging breaches of various obligations under the Visser MTA Agreement entered into on June 1, 2012 (see note 3).

 

In general, the Company has filed claims for damages against Visser for fraudulently inducing the Company to enter into the Visser MTA Agreement and harm inflicted on the Company for its failure to perform under the manufacturing component of the Visser MTA Agreement. In addition, the Company is seeking reformation and/or termination of parts of the Visser MTA Agreement in order to free the Company from the exclusive manufacturing arrangement with Visser and allow the Company to seek other manufacturing partners. Visser has also filed claims for damages against the Company alleging several violations of the Visser MTA Agreement including fraudulent contract inducement and securities fraud through alleged misrepresentations regarding the future capitalization of the Company, breach of several components of the Visser MTA Agreement through alleged inappropriate sharing of intellectual property with other business partners, as well as the lack of a qualified sales force in marketing the Company’s technology and related production efforts of Visser. Visser also requests equitable relief in the form of orders increasing its stock ownership in the Company and requiring the Company to honor its asserted rights of first refusal with respect to the Company’s technology.

 

The Company believes that the claims by Visser are without merit and intends to defend itself vigorously and to forcefully pursue its claims for fraudulent inducement, breach of contract and other causes of action against Visser. The Company can make no predictions regarding the outcome of this arbitration. The pendency of the dispute and the arbitration could have a material, adverse effect on the Company and its results of operations and financial condition, as well as upon the market price of the Company's common stock held by the Company's stockholders.

 

Common Stock Purchase Agreement

 

On November 8, 2013 the Company entered into a Common Stock Purchase Agreement with various institutional investors (the “investors”) that allows, but does not obligate, the Company to issue and sell up to $20 million of shares of its common stock to the investors from time to time over the 36-month period following the effectiveness of a registration statement that the Company has agreed to file with the Securities and Exchange Commission to register the resale of the stock by the investors. The Company may, in accordance with the procedures outlined in the agreement, notify the investors of the dollar amount that the Company intends to sell to the investors, subject to a maximum amount equal to the lesser of (i) a specified dollar amount set forth in the agreement and (ii) a dollar amount equal to 300% of the average daily trading volume of the company's common stock for the ten trading days immediately prior to the date of the request. Upon such a notice, the investors will be contractually obligated to purchase the shares at a purchase price equal to 90% of the lowest daily volume weighted average price of the common stock over a five-day pricing period beginning on the date of the notice.

 

In consideration for execution and delivery of the agreement, the Company will be issuing to each of the investors a pro rata portion of 2,666,667 shares of the Company’s common stock.

 

 
17

 

 

Item 2 – Management’s Discussion and Analysis of Financial Condition and Results of Operations

 

This management’s discussion and analysis should be read in conjunction with the consolidated financial statements and notes included elsewhere in this Quarterly Report on Form 10-Q. All amounts described in this section are in thousands, except share and per share data.

 

This management’s discussion and analysis, as well as other sections of this Quarterly Report on Form 10-Q, may contain “forward-looking statements” that involve risks and uncertainties, including statements regarding our plans, future events, objectives, expectations, forecasts, or assumptions. Any statement that is not a statement of historical fact is a forward-looking statement, and in some cases, words such as “believe,” “estimate,” “project,” “expect,” “intend,” “may,” “anticipate,” “plan,” “seek,” and similar expressions identify forward-looking statements. These statements involve risks and uncertainties that could cause actual outcomes and results to differ materially from the anticipated outcomes or results, and undue reliance should not be placed on these statements. These risks and uncertainties include, but are not limited to, the matters discussed under the heading “Item 1A. Risk Factors” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2012 and other risks and uncertainties discussed in other filings made with the Securities and Exchange Commission (including risks described in subsequent reports on Form 10-Q, and Form 8-K and other filings). Liquidmetal Technologies disclaims any intention or obligation to update or revise any forward-looking statements, whether as a result of new information, future events, or otherwise.

 

 

Overview

 

We are a materials technology company that develops and commercializes products made from amorphous alloys.  Our Liquidmetal® family of alloys consists of a variety of proprietary bulk alloys and composites that utilize the advantages offered by amorphous alloy technology. We design, develop and sell products and components from bulk amorphous alloys to customers in various industries. We also partner with third-party manufacturers and licensees to develop and commercialize Liquidmetal alloy products.

 

Amorphous alloys are, in general, unique materials that are distinguished by their ability to retain a random atomic structure when they solidify, in contrast to the crystalline atomic structures that form in other metals and alloys when they solidify. Liquidmetal alloys are proprietary amorphous alloys that possess a combination of performance, processing, and potential cost advantages that we believe will make them preferable to other materials in a variety of applications. The amorphous atomic structure of our alloys enables them to overcome certain performance limitations caused by inherent weaknesses in crystalline atomic structures, thus facilitating performance and processing characteristics superior in many ways to those of their crystalline counterparts. For example, in laboratory testing, our zirconium-titanium Liquidmetal alloys are approximately 250% stronger than commonly used titanium alloys such as Ti-6Al-4V, but they also have some of the beneficial processing characteristics more commonly associated with plastics. We believe these advantages could result in Liquidmetal alloys supplanting high-performance alloys, such as titanium and stainless steel, and other incumbent materials in a variety of applications. Moreover, we believe these advantages could enable the introduction of entirely new products and applications that are not possible or commercially viable with other materials.

 

Our revenues are derived from (i) selling our bulk Liquidmetal alloy products, which include non-consumer electronic devices, aerospace parts, medical products, automotive components, oil and gas exploration, and sports and leisure goods, (ii) selling tooling and prototype parts such as demonstration parts and test samples for customers with products in development, (iii) product licensing and royalty revenue, and (iv) research and development revenue.  

 

Our cost of sales consists primarily of the costs of outsourcing our manufacturing to third parties. Selling, general, and administrative expenses currently consist primarily of salaries and related benefits, travel, consulting and professional fees, depreciation and amortization, insurance, office and administrative expenses, and other expenses related to our operations.

 

Research and development expenses represent salaries, related benefits expense, depreciation of research equipment, consulting and contract services, expenses incurred for the design and testing of new processing methods, expenses for the development of sample and prototype products, and other expenses related to the research and development of Liquidmetal bulk alloys. Costs associated with research and development activities are expensed as incurred. We plan to enhance our competitive position by improving our existing technologies and developing advances in amorphous alloy technologies. We believe that our research and development efforts will focus on the discovery of new alloy compositions, the development of improved processing technology, and the identification of new applications for our alloys.

 

Licensing Transactions

 

Transaction with Visser Precision Cast, LLC

 

On June 1, 2012, we entered into a Master Transaction Agreement (the “Visser MTA Agreement”) with Visser Precision Cast, LLC (“Visser”) relating to a strategic transaction for manufacturing services and financing.

 

 

 
18

 

 

Under the manufacturing and service component of the Visser MTA Agreement, we have agreed to engage Visser as a perpetual, exclusive manufacturer of non-consumer electronic products and to not, directly or indirectly, conduct manufacturing operations, subcontract for the manufacture of products or components or grant a license to any other party to conduct manufacturing operations, except for certain limited exceptions. Further, we have agreed to sublicense to Visser, on a fully-paid up, royalty-free, irrevocable, perpetual, worldwide basis, all intellectual property rights held by us. Visser’s use of such sublicense is limited to the exercise of its manufacturing rights, provided that such limitation will terminate if we fail to comply with certain technical, administrative, and research and development support obligations set forth in the transaction agreements with Visser and such failure is not cured within 60 days. In addition, Visser has a right of first refusal over any proposed transfer of our technology pursuant to any license, sublicense, sale or other transfer, other than a license to a machine or alloy vendor.

 

Under the Visser MTA Agreement, we issued and sold to Visser in a private placement transaction (i) 30,000,000 shares of common stock at a purchase price of $0.10 per share resulting in proceeds of $3,000, and (ii) warrants to purchase 15,000,000 shares of common stock (subsequently increased to 18,539,762 shares under the anti-dilution provisions of the warrants) at an original exercise price of $0.22 per share (subsequently reduced to $0.18 per share under the anti-dilution provisions of the warrants), which expire on June 1, 2017. All of the shares of common stock issuable upon exercise of the warrants are subject to a lockup period through December 31, 2016.

 

In November 2013, we entered into arbitration proceedings with Visser to resolve disputes associated with the Visser MTA Agreement (see note 15 in the accompanying footnotes to the financial statements).

 

Apple License Transaction

 

On August 5, 2010, we entered into a license transaction with Apple Inc. (“Apple”) pursuant to which (i) we contributed substantially all of our intellectual property assets to a newly organized special-purpose, wholly-owned subsidiary, called Crucible Intellectual Property, LLC (“CIP”), (ii) CIP granted to Apple a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in the field of consumer electronic products, as defined in the license agreement, in exchange for a license fee, and (iii) CIP granted back to us a perpetual, worldwide, fully-paid, exclusive license to commercialize such intellectual property in all other fields of use. Additionally, in connection with the license transaction, Apple required us to complete a statement of work related to the exchange of Liquidmetal intellectual property information. We recognized a portion of the one-time license fee upon receipt of the initial payment and completion of the foregoing requirements under the license transaction. The remaining portion of the one-time license fee was recognized at the completion of the required statement of work.

 

Under the agreements relating to the license transaction with Apple, we are obligated to contribute all intellectual property that we developed through February 2012 (and subsequently amended to extend through February 2014) to CIP. We are also obligated to maintain certain limited liability company formalities with respect to CIP at all times after the closing of the license transaction.

 

Other License Transactions

 

On January 31, 2012, we entered into a Supply and License Agreement for a five year term with Engel Austria Gmbh (“Engel”) whereby Engel was granted a non-exclusive license to manufacture and sell injection molding machines to our licensees. Since that time, we have delivered to Engel a customized induction melt system with a configuration for a standard injection-molding machine that that can be commercially supplied and supported by Engel to enable future licensees to manufacture Liquidmetal components.  As of September 30, 2013, no revenues have been recognized under this agreement. 

 

On November 16, 2011, we entered into a Development Agreement with Materion Brush Inc. (“Materion”) to evaluate, analyze and develop amorphous alloy feedstock to be supplied in commercial quantities.  Further, on June 17, 2012, we entered into a Sales Representation Agreement with Materion whereby Materion shall promote the sale of our products for certain commissions.  This agreement is for a two year initial term with annual, automatic renewals. To date, there have been no commission payments related to this agreement.

 

Our Liquidmetal Golf subsidiary has the exclusive right and license to utilize our Liquidmetal alloy technology for purposes of golf equipment applications. This right and license is set forth in an intercompany license agreement between us and Liquidmetal Golf. This license agreement provides that Liquidmetal Golf has a perpetual and exclusive license to use Liquidmetal alloy technology for the purpose of manufacturing, marketing, and selling golf club components and other products used in the sport of golf. We own 79% of the outstanding common stock in Liquidmetal Golf.

 

In June 2003, we entered into an exclusive license agreement with LLPG, Inc. (“LLPG”). Under the terms of the agreement, LLPG has the right to commercialize Liquidmetal alloys, particularly precious-metal based compositions, in jewelry and high-end luxury product markets. We, in turn, will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by LLPG. The exclusive license agreement with LLPG expires on December 31, 2021.

 

In March 2009, we entered into a license agreement with Swatch Group, Ltd. (“Swatch”) under which Swatch was granted a perpetual non-exclusive license to our technology to produce and market watches and certain other luxury products. In March 2011, this license agreement was amended to grant Swatch exclusive rights as to watches, and our license agreement with LLPG was simultaneously amended to exclude watches from LLPG’s rights. We will receive royalty payments over the life of the contract on all Liquidmetal products produced and sold by Swatch. The license agreement with Swatch will expire on the expiration date of the last licensed patent.

 

Critical Accounting Policies and Estimates

 

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States requires us to make estimates and assumptions that affect reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. These estimates and assumptions are based on historical experience and various other factors that are believed to be reasonable under the circumstances. Actual results could differ materially from these estimates under different assumptions or conditions.

  

 
19

 

 

We believe that the following accounting policies are the most critical to our consolidated financial statements since these policies require significant judgment or involve complex estimates that are important to the portrayal of our financial condition and operating results:

 

 

Revenue recognition   

 

•  

Impairment of long-lived assets and definite-lived intangibles   

 

Deferred tax assets   

 

Valuation of embedded convertible feature liability and warrants   

 

Debt discount   

 

Share based compensation   

 

Our Annual Report on Form 10-K for the year ended December 31, 2012 (the “2012 Annual Report”) contains further discussions on our critical accounting policies and estimates.

  

 
20

 

 

 

Results of Operations  

 

Comparison of the three and nine months ended September 30, 2013 and 2012

 

   

For the three months ended September 30,

   

For the nine months ended September 30,

 
                                                         
   

2013

           

2012

           

2013

           

2012

         
   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

   

in 000's

   

% of Products Revenue

 
                                                                 

Revenue:

                                                               

Products

  $ 456             $ 80             $ 721             $ 471          

Licensing and royalties

    -               27               7               46          

Total revenue

    456               107               728               517          
                                                                 

Cost of sales

    396       87%       73       91%       589       82%       256       54%  
                                                                 

Gross margin

    60       13%       34       43%       139       19%       261       55%  
                                                                 

Selling, marketing general and administrative

    1,213       266%       1,372       1715%       3,735       518%       3,338       709%  

Research and development

    368       81%       217       271%       829       115%       616       131%  

Manufacturing contract costs

    -               -               -               6,300          
                                                                 

Operating loss

    (1,521 )             (1,555 )             (4,425 )             (9,993 )        
                                                                 

Change in value of warrants, gain (loss)

    (2,511 )             4,184               (1,715 )             4,010          

Change in value of embedded conversion feature liabilities, gain

    (2,435 )             2,785               621               2,785          

Debt discount amortization expense

    (361 )             (6,247 )             (6,504 )             (6,247 )        

Financing costs

    -               -               -               (1,355 )        

Interest expense

    (21 )             (240 )             (242 )             (258 )        

Interest income

    1               10               5               18          

Gain on extinguishment of debt

    91               -               91               -          

  

In discussing our results of our operations, we have categorized the specific items of our statements of operations into various categories to facilitate the understanding of our core business operations. Explanations of each category as well as analyses of specific items contained in that category are discussed below:

 

Operating revenue and expenses

 

The “Operating revenue and expenses” category of statements of operations items represent those items that pertain to our core operations in the bulk alloy manufacturing and licensing business as follows:

 

Revenue. Total revenue increased to $456 for the three months ended September 30, 2013 from $107 for the three months ended September 30, 2012. Total revenue also increased for the nine months ended September 30, 2013 to $728 from $517 for the same period in 2012. The increase for the respective periods was primarily attributable to an increase in research and development services under existing purchase orders.

 

Cost of sales. Cost of sales was $396, or 87% of products revenue, for the three months ended September 30, 2013, an increase from $73, or 91% of products revenue, for the three months ended September 30, 2012. Cost of sales was $589, or 82% of products revenue, for the nine months ended September 30, 2013, an increase from $256, or 54% of products revenue, for the nine months ended September 30, 2012. The cost to manufacture parts from our bulk alloys manufacturing business is variable and differs based on the unique design of each product. In addition, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to products revenue, than would otherwise be incurred by contract manufacturers. Therefore, our cost of sales as a percentage of products revenue may not be representative of our future cost percentages. When and if we begin increasing our products revenues with shipments of routine, commercial parts through our third party contract manufacturer, we expect our cost of sales percentages to stabilize and be more predictable.

 

 
21

 

 

Gross margin. Our gross margin increased to $60 from $34 for the three month periods ended September 30, 2013, and 2012, respectively. Our gross margin, as a percentage of products revenue, decreased to 13% from 43% for the three month periods ended September 30, 2013, and 2012, respectively. Our gross margin decreased to $139 from $261 for the nine month periods ended September 30, 2013, and 2012, respectively. Our gross margin, as a percentage of products revenue, decreased to 19% from 55% for the nine month periods ended September 30, 2013, and 2012, respectively. As discussed above under “Cost of sales”, much of our current product mix consists of prototype parts and other revenue which have higher internal variable cost percentages, relative to revenue, than would otherwise be incurred by contract manufacturers. As such, our gross margin percentages may fluctuate based on volume and quoted production prices per unit and may not be representative of our future business. When and if we begin increasing our revenues with shipments of routine, commercial parts through our third party contract manufacturer, we expect our gross margin percentages to stabilize and be more predictable.

 

Selling, Marketing, General, and Administrative. Selling, marketing, general and administrative expenses were $1,213 and $3,735 for the three and nine months ended September 30, 2013, respectively, compared to $1,372 and $3,338 for the three and nine months ended September 30, 2012, respectively. The increase in expense for the nine-month period ended September 30, 2013 is due to additional payroll expenses for new hires including an Executive Vice President of Business Development and Operations and a Sales Engineer to facilitate the adoption of our technology. The decrease in the three month period ended September 30, 2013 is due to reductions in legal and consulting expenses, which were slightly off-set by increases in payroll expenses for the period.

 

Research and Development. Research and development expenses increased to $368 and $829 for the three and nine months ended September 30, 2013, respectively, from $217 and $616 for the three and nine months ended September 30, 2012, respectively. The increase from the prior year was mainly due to additional company research during 2013, inclusive of testing programs related to our golf subsidiary, and the hiring of our Vice President of Engineering at the end of 2012. We continue to perform research and development of new Liquidmetal alloys and related processing capabilities, develop new manufacturing techniques, and contract with consultants to advance the development of Liquidmetal alloys and related production processes.

 

Manufacturing Contract Costs. Manufacturing contract costs consisted of $6,300 for the three and nine months ended September 30, 2012 related to the discount pricing that Visser received under the Visser MTA Agreement (see note 3 “June 2012 Visser MTA Agreement” in the accompanying footnote to the financial statements). The $6,300 was determined by taking the $0.21 difference between the Company’s weighted average $0.31 stock price at the time of issuances of our common stock to Visser and the $0.10 per share actual purchase price, multiplied by the 30,000,000 shares issued to Visser. No such costs were incurred in 2013. 

 

Operating loss. Operating loss was $1,521 and $4,425 for the three and nine month periods ended September 30, 2013, respectively. This compares to $1,555 and $9,993 for the three and nine month periods ended September 30, 2012. Excluding the one-time manufacturing contract costs, loss was $1,555 and $3,693 for the three and nine month periods ended September 30, 2012, respectively. The change in our loss is primarily attributable to the increase in operating expenses, off-set by higher revenues, as discussed above.

 

We continue to invest in our technology infrastructure to expedite the adoption of our technology, but we have experienced long sales lead times for customer adoption of our technology. Until that time where we can either i) increase our revenues with shipments of routine, commercial parts through our third party contract manufacturer or ii) obtain significant licensing revenues, we expect to have operating losses for the foreseeable future.

 

Non-operational expenses

 

Our statement of operations contains various, significant items that are non-operational in nature. These categories of expenses may have significant gains and losses based on the volatility of our stock price as follows:

 

Change in Value of Warrants. The change in value of warrants was a non-cash loss of $2,511 and $1,715 for the three and nine months ended September 30, 2013, respectively. The change in value of warrants was a non-cash gain of $4,184 and $4,010 for the three and nine months ended September 30, 2012, respectively. These gains and losses result from periodic valuation adjustments related to fluctuations in our stock price for warrants issued in connection with the Visser MTA Agreement and our senior convertible notes issued in our private placement that closed in July 2012, as further described in note 3 to the accompanying financial statements (the “July 2012 Private Placement”). Changes in the value of our warrants are non-cash and do not affect the core operations of our business or liquidity.

 

Change in Value of Embedded Conversion Feature Liability. Change in value of embedded conversion feature liability was a non-cash gain (loss) of $(2,435) and $621 for the three and nine months ended September 30, 2013, respectively. The change in value of embedded conversion feature liability is due to changes in our stock price associated with the valuation of our embedded conversion feature liability related to the senior convertible notes issued as part of the July 2012 Private Placement, as well as the gradual decrease in the embedded conversion feature liability in conjunction with the amortization of our senior convertible notes. As part of the final conversion of the senior convertible notes on July 17, 2013, the associated embedded conversion liability was reduced to zero due to exercise of the conversion option and was included in the calculation of the resulting gain on extinguishment of the senior convertible notes (see note 7 in the accompanying footnotes to the financial statements).

  

 
22

 

 

Debt Discount Amortization. Debt discount amortization expense was $361 and $6,504 of non-cash expense for the three and nine months ended September 30, 2013, respectively (See Consolidated Statements of Cash Flows in the accompanying financial statements). Debt discount amortization primarily relates to the amortization of $12,000 of original debt discount over the term of the senior convertible notes issued as part of the July 2012 Private Placement along with related issuance costs. The amount includes amortization of debt discount and issuance costs of $188 and $4,541 for the three and nine months ended September 30, 2013, respectively, under the effective interest method, as well as $173 and $1,964 of expense for the three and nine months period ended September 30, 2013, respectively, related to the additional issuance of stock at a discount in relation to the amortization of our senior convertible notes. As part of the final conversion of the senior convertible notes on July 17, 2013, the associated unamortized debt discount and debt issuance costs were reduced to zero and were included in the calculation of the resulting gain on extinguishment of the senior convertible notes (see note 7 in the accompanying footnotes to the financial statements).

 

Financing Costs. Financing costs consisted of $1,355 for the three and nine months ended September 30, 2012 related to the recording of our warrant liability for the issuance of warrants to purchase 15,000,000 shares of our common stock to Visser at an exercise price of $0.22 per share, which expire on June 1, 2017 under the Visser MTA Agreement (see note 3 in the accompanying footnotes to the financial statements). No such financing costs were incurred in 2013.

 

Interest Expense. Interest expense for the three and nine months ended September 30, 2013 was $21 and $242, respectively, and consists of the 8% interest related to the senior convertible notes issued as part of the July 2012 Private Placement. Interest expense related to the same obligation was $240 and $258, respectively, for the three and nine months ended September 30, 2012.

 

Interest Income. Interest income relates to interest earned from our cash deposit for the respective periods.

 

Gain on Extinguishment of Debt. Gain on extinguishment of debt was $91 for both the three and nine month periods ended September 30, 2013, respectively. The gain consisted of the write-off of unamortized debt discount, unamortized debt issuance costs, embedded conversion feature liabilities, and the difference between the reacquisition price of the shares issued and the contractual conversion price of the Senior Convertible Notes (see note 7 in the accompanying footnotes to the financial statements).

 

 

Liquidity and Capital Resources 

 

Our cash used in operations was $4,028 for the nine months ended September 30, 2013, cash used in investing activities was $185 for the nine months ended September 30, 2013, and cash provided by financing activities was $74 for the nine months ended September 30, 2013. As of September 30, 2013, our cash balance was $3,023.

 

On July 2, 2012, we completed the July 2012 Private Placement pursuant to which we issued $12,000 in principal amount of senior convertible notes that were due on September 1, 2013 and warrants to the purchasers of such notes giving such purchasers the right to purchase up to an aggregate of 18,750,000 shares of our common stock at an exercise price of $0.384 per share. As of July 17, 2013, the notes issued in the July 2012 Private Placement were paid off in full through the issuance of common stock (see note 7 in the accompanying footnotes to the financial statements).

 

We anticipate that our current capital resources, when considering expected losses from operations, will be sufficient to fund our operations through the end of the first quarter of 2014. We have a relatively limited history of producing bulk amorphous alloy components and products on a mass-production scale. Furthermore, Visser’s ability to produce our products in desired quantities and at commercially reasonable prices is uncertain and is dependent on a variety of factors that are outside of our control, including the nature and design of the component, the customer’s specifications, and required delivery timelines. Such factors will likely require that we raise additional funds to support our operations beyond the first quarter of 2014. There is no assurance that we will be able to raise such additional funds on acceptable terms, if at all. If we raise additional funds by issuing securities, existing stockholders may be diluted. If funding is insufficient at any time in the future, we may be required to alter or reduce the scope of our operations or to cease operations entirely. Uncertainty as to the outcome of these factors raises substantial doubt about our ability to continue as a going concern.

 

On November 8, 2013, we entered into a Common Stock Purchase Agreement that will allow us to raise up to $20 million through periodic issuances of common stock over a three year period (see note 15 in the accompanying footnotes to the financial statements).

 

Off Balance Sheet Arrangements 

 

As of September 30, 2013, we did not have any off-balance sheet arrangements.

 

Item 3 – Quantitative and Qualitative Disclosures about Market Risk

 

Not applicable.

 

Item 4 – Controls and Procedures

 

Evaluation of Disclosure Controls and Procedures

 

Under the supervision and with the participation of our management, including our Chief Executive Officer (Principal Executive Officer) and Chief Financial Officer (Principal Financial Officer), we carried out an evaluation of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Securities Exchange Act of 1934, as amended) as of September 30, 2013. Based on their evaluation, our Chief Executive Officer and Chief Financial Officer have concluded that our disclosure controls and procedures were effective as of September 30, 2013.

  

 
23

 

 

Changes in Internal Control over Financial Reporting.

 

On April 1, 2013, we implemented Great Plains ERP system to facilitate all of our financial reporting systems and controls. Aside from continued process improvements related to the use of this system, we have hired additional personnel to improve and further implement policies and procedures relating to our internal control over financial reporting. While this is not seen as a material change that occurred during the quarter ended September 30, 2013, we believe these to be positive efforts on the continued strengthening of our system of internal controls over financial reporting.

 

 

 
24

 

 

PART II

OTHER INFORMATION

Item 1 – Legal Proceedings

 

There have been no significant developments with respect to legal proceedings specifically affecting Liquidmetal Technologies Inc. since the filing our annual report on Form 10-K for the year ended December 31, 2012, except as follows:

 

In November 2013, Visser and we entered into arbitration proceedings with the Judicial Arbiter Group in Denver, CO. Both parties have filed claims alleging breaches of various obligations under the Visser MTA Agreement entered into on June 1, 2012.

 

In general, we have filed claims for damages against Visser for fraudulently inducing us into entering the Visser MTA Agreement and harm inflicted on us for its failure to perform under the manufacturing component of the Visser MTA Agreement. In addition, we are seeking reformation and/or termination of parts of the Visser MTA Agreement in order to free us from the exclusive manufacturing arrangement with Visser and allow us to seek other manufacturing partners. Visser has also filed claims for damages against us alleging several violations of the Visser MTA Agreement including fraudulent contract inducement and securities fraud through alleged misrepresentations regarding our future capitalization, breach of several components of the Visser MTA Agreement through alleged inappropriate sharing of intellectual property with other business partners, as well as the lack of a qualified sales force in marketing our technology and related production efforts of Visser. Visser also requests equitable relief in the form of orders increasing its stock ownership and requiring us to honor its asserted rights of first refusal with respect to our technology.

 

Item 1A – Risk Factors

 

For a detailed discussion of the risk factors that should be understood by any investor contemplating an investment in our stock, please refer to Part I, Item 1A “Risk Factors” in the 2012 Annual Report.

 

Item 2 – Unregistered Sales of Equity Securities and Use of Proceeds

 

During the period covered by this Quarterly Report on Form 10-Q, we issued the following securities which were not registered under the Securities Act of 1933, as amended:

 

 

1.

As previously described in a Form 8-K filed on July 3, 2012, we completed on July 2, 2012, a private placement of $12.0 million in senior convertible notes (the “Notes”). During the period covered by this Quarterly Report on Form 10-Q, we issued an aggregate of 21,571,656 shares of our common stock to the five holders of the Notes in satisfaction of final installment payments due under the Notes. Through the date on which this Quarterly Report is filed, we have issued an aggregate of 163,641,547 shares of common stock to the holders of the Notes in full satisfaction of principal and interest under the Notes. The foregoing issuances were made pursuant to the exemption from registration provided by Section 4(2) of the Securities Act of 1933, as amended, including pursuant to Rule 506 thereunder. Such issuances were made solely to “accredited investors” under Rule 506 and were made without any form of general solicitation and with full access to any information requested by the holders of the Notes (in connection with the private placement in which the Notes were offered and sold) regarding the Company or the securities offered in the private placement.

 

 

Item 3 – Defaults Upon Senior Securities

 

None.

 

Item 4 – Mine Safety Disclosures

 

None.

 

Item 5 – Other Information

 

None.

 

 

 
25

 

 

 

Item 6 – Exhibits

 

The following documents are filed as exhibits to this Report:

 

 

Exhibit

Number      Description of Document                                                                                                        

 

 

31.1

 

Certification of Principal Executive Officer, Thomas Steipp, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

31.2

 

Certification of Principal Financial Officer, Tony Chung, as required by Section 302 of the Sarbanes-Oxley Act of 2002

     

32.1

 

Certification of Chief Executive Officer, Thomas Steipp, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

32.2

 

Certification of Chief Financial Officer, Tony Chung, pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

     

101.1

 

The following financial statements from Liquidmetal Technologies, Inc.’s Quarterly Report on Form 10-Q for the quarter ended September 30, 2013 (unaudited), formatted in XBRL: (i) Consolidated Balance Sheets as of September 30, 2013 and December 31, 2012, (ii) Consolidated Statements of Operations and Comprehensive Loss for the three and nine months ended September 30, 2013 and 2012, (iii) Consolidated Statement of Shareholders’ Deficit for the nine months ended September 30, 2013, (iv) Consolidated Statements of Cash Flows for the nine months ended September 30, 2013 and 2012, and (v) Notes to Consolidated Financial Statements.

 

  

 
26

 

  

SIGNATURES

 

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

 

 

LIQUIDMETAL TECHNOLOGIES, INC.

 

 

(Registrant)

 

 

 

 

Date: November 8, 2013

/s/ Thomas Steipp

 

 

Thomas Steipp

 

 

President and Chief Executive Officer

 

 

(Principal Executive Officer)

 

 

 

 

 

 

 

Date: November 8, 2013

/s/ Tony Chung

 

 

Tony Chung

 

 

Chief Financial Officer

 

 

(Principal Financial and Accounting Officer)