Attached files

file filename
EX-32.2 - EXHIBIT 32.2 - Clean Energy Technologies, Inc.exhibit322_ex32z2.htm
EX-31.1 - EXHIBIT 31.1 - Clean Energy Technologies, Inc.exhibit311_ex31z1.htm
EX-31.2 - EXHIBIT 31.2 - Clean Energy Technologies, Inc.exhibit312_ex31z2.htm
EX-32.1 - EXHIBIT 32.1 - Clean Energy Technologies, Inc.exhibit321_ex32z1.htm
EXCEL - IDEA: XBRL DOCUMENT - Clean Energy Technologies, Inc.Financial_Report.xls

Table of Contents




UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549


FORM 10-Q


(Mark One)

R

QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

 

  For the quarterly period ended June 30, 2013

 

 

or

 

 

£

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

 

 

      For the transition period from

 to


     Commission File Number: 333-125678 (1933 Act)


PROBE MANUFACTURING, INC.

(Exact name of registrant as specified in its charter)


Nevada

20-2675800

(State or other jurisdiction of incorporation or organization)

(I.R.S. Employer Identification No.)

 

 

17475 Gillette Avenue, Irvine CA

92614

(Address of principal executive offices)

(Zip Code)


(949) 273-4990

(Registrant’s telephone number, including area code)


N/A

(Former name, former address and former fiscal year, if changed since last report)


Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.      R  Yes £ No


Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).                                                 R Yes £ No


Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.  (check one)


Large accelerated filer

  

o

  

Accelerated filer

  

o

Non-accelerated filer

  

o (Do not check if a smaller reporting company)

  

Smaller reporting company

  

þ



Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).       

                              £ Yes R No


    As of August 1, 2013there were 23,451,945 shares of common stock of Probe Manufacturing, Inc. outstanding.

 




Page 1 of 30


Table of Contents


PROBE MAUFACTURING, INC.

(A Nevada Corporation)


TABLE OF CONTENTS

 

 

PART I — FINANCIAL INFORMATION


 

 

Item 1. Financial Statements

3


Report of Independent Registered Public Accounting Firm

3


Balance Sheet as of June 30, 2013 (Unaudited) and December 31, 2012

4


Statement of Operations for the Three and Six Months Ended June 30, 2013 (Unaudited) and June 30, 2012 (Unaudited)

5

  

Statement of Cash Flows for the Six Months Ended June 30, 2013 (Unaudited) and June 30, 2012 (Unaudited)

6


Notes to Condensed Financial Statements (Unaudited)

7

 

 

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

20

 

 

Item 3. Quantitative and Qualitative Disclosures About Market Risk

31

 

 

Item 4. Controls and Procedures

31

 

 

 

 

PART II — OTHER INFORMATION

 

 

 

Item 1. Legal Proceedings

31

 

 

Item 1A. Risk Factors

32

 

 

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

32

 

 

Item 3. Defaults Upon Senior Securities

32

 

 

Item 4. [Removed and Reserved.]

32

 

 

Item 5. Other Information

32

 

 

Item 6. Exhibits

32

 

 

Signatures

33


Exhibit 31.1

Exhibit 31.2

Exhibit 32.1

Exhibit 32.2

EX-101 INSTANCE DOCUMENT

EX-101 SCHEMA DOCUMENT

EX-101 CALCULATION LINKBASE DOCUMENT

EX-101 LABELS LINKBASE DOCUMENT

EX-101 PRESENTATION LINKBASE DOCUMENT

EX-101 DEFINITION LINKBASE DOCUMENT





Page 2 of 30


Table of Contents






REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM


To the Board of Directors:


Probe Manufacturing, Inc.

17475 Gillette Avenue

Irvine, CA  92614



We have reviewed the accompanying balance sheet of Probe Manufacturing, Inc. as of June 30, 2013 and the related statements of operations and cash flows for the six-month period ended June 30, 2013. These financial statements are the responsibility of the Company’s management.


We conducted our review in accordance with the standards of the Public Company Accounting Oversight Board (United States). A review of interim financial information consists principally of applying analytical procedures and making inquiries of persons responsible for financial and accounting matters. It is substantially less in scope than an audit conducted in accordance with standards of the Public Company Accounting Oversight Board (United States), the objective of which is the expression of an opinion regarding the financial statements taken as a whole. Accordingly, we do not express such an opinion.

Based on our review, we are not aware of any material modifications that should be made to the accompanying interim financial statements referred to above for them to be in conformity with accounting principles generally accepted in the United States of America.

The accompanying financial statements have been prepared assuming that the Company will continue as a going concern. As discussed in Note 1, conditions exist which raise substantial doubt about the Company’s ability to continue as a going concern. The financial statements do not include any adjustments that might result from the outcome of the uncertainty.


/s/William.T. Uniack


W.T. UNIACK & CO, CPA’s, P.C.

August 16, 2013





Page 3 of 30


Table of Contents


PART I - FINANCIAL INFORMATION

Item 1. Financial Statements


PROBE MANUFACTURING, INC.

Condensed Balance Sheet

 

 

Un-Audited

 

 

 

June 30,

December 31,

 

 

2013

2012

Assets

 

 

Current Assets:

 

 

 

 Cash

 $                         340,072

 $                       19,260

 

Accounts receivable - net

                            600,387

                        908,697

 

Inventory

                            700,806

                        629,841

 

Total Current Assets

                1,641,265

            1,557,798

 

 

 

 

Property And Equipment - Net

                   148,780

               131,587

 

 

 

 

 

Goodwill

                            420,673

                                 -   

 

Other Assets

                     40,023

                 22,376

Total Assets

 $             2,250,741

 $         1,711,761

 

 

 

 

Liabilities And Stockholders' ( Deficit )

 

 

Current Liabilities:

 

 

 

Accounts payable - trade

                            622,770

                        453,913

 

Accrued Expenses

                            104,970

                        105,668

 

Notes Payable - Line of Credit

                            698,699

                        858,543

 

Notes Payable - Current

                     32,698

                   8,664

 

Total Current Liabilities

                1,459,137

            1,426,788

Long-Term Debt:

 

 

 

Notes Payable

                            -   

                        -   

 

Less Current portion of Long Term Debt

                            -   

                        -   

 

Net Long-Term Debt

                            -   

                        -   

Total Liabilities

                1,459,137

            1,426,788

 

 

 

 

Stockholders'  ( Deficit )

 

 

 

Preferred D stock, stated value $100 per share; 20,000 shares authorized; 5000 shares and 0 shares issued and outstanding respectively

                   500,000

                        -   

 

Common stock, $.001 par value; 400,000,000 shares authorized; 23,251,945 and 20,331,906 shares issued and outstanding respectively

                     40,073

                 20,332

 

Additional paid-in capital

                1,119,912

               620,130

 

Treasury Stock

                     (1,113)

                    (633)

 

Accumulated deficit

                 (867,268)

             (354,856)

 

Total Stockholders'  ( Deficit )

                   791,604

               284,973

Total Liabilities And Stockholders' Deficit

 $             2,250,741

 $         1,711,761


The accompanying notes are an integral part of these financial statements.



Page 4 of 30


Table of Contents



Probe Manufacturing, Inc.

Statement of Operations

for the three and six month periods ended

 June 30, 2013 and 2012 respectively

 

 

 

 

 

 

Un-audited

Un-audited

 

Three month period ended

Six month period ended

 

2013

2012

2013

2012

 

 

 

 

 

Sales

 $   1,023,338

 $   1,603,285

 $   1,735,995

 $   2,889,153

Cost of Goods Sold

         650,214

      1,143,532

      1,186,831

      2,064,648

Gross Profit

         373,124

         459,753

         549,164

         824,505

 

 

 

 

 

General And Administrative

         441,731

         325,266

         731,162

         629,663

Share Based Compensation

                   -   

           10,000

             2,124

           13,300

Net Profit / (Loss) From Operations

         (68,607)

         124,487

       (184,122)

         181,542

 

 

 

 

 

Other Income / (Expenses)

           55,777

                133

           55,777

                230

Interest Expense

         (72,246)

         (53,167)

       (102,667)

         (97,601)

Net Profit / (Loss) Before Income Taxes

         (85,076)

           71,453

       (231,012)

           84,171

Income Tax Expense

                     -

                     -

                     -

                     -

Net Profit / (Loss)

 $      (85,076)

 $        71,453

 $    (231,012)

 $        84,171

 

 

 

 

 

Per Share Information:

 

 

 

 

Basic weighted average number

 

 

 

 

of common shares outstanding

    21,682,685

    19,831,906

    21,052,790

    19,831,543

 

 

 

 

 

Net Profit / (Loss) per common share

               0.00

               0.00

               0.00

               0.00

 

 

 

 

 

Per Share Information:

 

 

 

 

Diluted, weighted average number

 

 

 

 

of common shares outstanding

    21,682,685

    20,415,439

    20,410,784

    20,410,784

 

 

 

 

 

Diluted, Net Profit / (Loss) per common share

            0.00

            0.00

            0.00

            0.00



The accompanying notes are an integral part of these financial statements.

 



Page 5 of 30


Table of Contents



PROBE MANUFACTURING, INC.

Consolidated Statements of Cash Flows

for the six months ended June 30,

 

 

 

 

 

 

 

 

Un-Audited

Un-Audited

 

 

 

2013

2012

Cash Flows from Operating Activities:

 

 

 

Net Income / ( Loss )

$

(231,012)

$

84,170 

 

Adjustments to reconcile net loss to net cash

 

 

 

 

used in operating activities:

 

 

 

 

Depreciation and amortization

16,472 

20,884 

 

 

Share based compensation

2,124 

13,300 

 

 

Gain from issuance of Shares for acquisition

(41,694)

 

 

Net Assets Acquired

(262,979)

 

 

Changes in assets and liabilities:

 

 

 

 

(Increase) decrease in accounts receivable

308,310 

(279,850)

 

 

(Increase) decrease in inventory

(70,965)

(60,447)

 

 

(Increase) decrease in other assets

(17,647)

(6,832)

 

 

(Decrease) increase in accounts payable

168,857 

51,150 

 

 

Other (Decrease) increase in accrued expenses

(698)

(40,838)

Net Cash provided / (Used) In Operating Activities

(129,232)

(218,463)

 

 

 

 

 

Cash Flows from Investing Activities

 

 

 

Purchase of Equipment

(33,665)

(11,673)

Cash Flows Used In Investing Activities

(33,665)

(11,673)

 

 

 

 

 

Cash Flows from Financing Activities

 

 

 

Bank Overdraft / (Repayment)

 

(Decrease) increase in advances line of credit

(159,845)

241,586 

 

Proceeds / (Payments) on notes payable

144,034 

 

Payments for Treasury stock repurchase

(480)

 

Proceeds from issuance of Preferred stock

500,000 

Cash Flows Provided / (used)  By Financing Activities

483,709 

241,586 

 

 

 

 

 

Net (Decrease) Increase in Cash and Cash Equivalents

320,812 

11,450 

 

 

 

 

 

Cash and Cash Equivalents at Beginning of Period

19,260 

18,349 

 

 

 

 

 

Cash and Cash Equivalents at End of Period

$

340,072 

$

29,799 

 

 

 

 

 

Supplemental Information:

 

 

 

Interest Paid

$

101,017 

$

97,351 

 

 

 

 

 

 

Shares issued for note conversion

$

120,000 

$

 

 

 

 

 

 

Shares issued for acquisition

$

116,000 

 


The accompanying notes are an integral part of these financial statements.



Page 6 of 30


Table of Contents


PROBE MANUFACTURING, INC.


NOTES TO CONDENSED FINANCIAL STATEMENTS (UNAUDITED)


The use of the words “Probe,” “PMI,” “we,” “us,” “our” or “the Company” refers to Probe Manufacturing, Inc. and its subsidiaries, except where the context otherwise requires.


1. Organization and Description of the Business.


Probe Manufacturing Industries, Inc. was incorporated on July 7, 1995. On April 21, 2005, the Company was re-domiciled from California to Nevada, and changed its name to Probe Manufacturing, Inc. Probe is a high quality global electronics manufacturing service (EMS) company. We provide a full range of engineering, manufacturing and integrated supply chain services to original equipment manufacturers (OEM) companies, who design and market electronic products. Currently, our revenue is generated from sales of our services primarily to customers in the medical device, aerospace, alternative fuel, industrial and instrumentation products manufacturers. Probe's EMS offerings include new product introduction, collaborative design, materials management, product manufacturing, product testing and product warranty repair, and end-of-life support. Because our core business is a service company, we’re impacted by our customer’s ability to appropriately predict market demand for their products. While we work with our customers to understand their demand needs, we are removed from the actual end-market served by our customers. Consequently determining future trends and estimates of activity can be very difficult


Going Concern


The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. The Company had a total stockholder’s equity of $791,604 and a working capital surplus of $182,128; however, we still had net loss of $(231,012) for the six months ended June 30, 2013 and an accumulated deficit of $(867,268) as of June 30, 2013. Therefore, the ability of the Company to operate as a going concern is still dependent upon its ability to: (1) obtain sufficient debt and/or equity capital; and/or (2) generate positive cash flow from operations.


Plan of Operation


Management is taking the following steps to sustain profitability and growth: (i) organic growth, new sales and expansion of services along the supply chain line; (ii) Utilization of our manufacturing foundry platform to support innovators by making investment in their technologies in return for manufacturing rights and equity; (iv) expansion of capabilities and competencies through mergers & acquisitions providing scale, cost synergies and revenue opportunities.


Our future success is likely dependent on its ability to sustain profitable growth and attain additional capital to support our future success is likely dependent on our ability to attain growth capital in order to sustain growth and profitability.  There can be no assurance that we will be successful in obtaining any such financing, or that it will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern. 

 

There can be no assurances that this financing will be sufficient to sustain profitable growth and attain additional capital to support growth. There can be no assurance that we will be successful in obtaining any such additional financing, or that we will be able to generate sufficient positive cash flow from operations.  The successful outcome of these or any future activities cannot be determined at this time and there is no assurance that if achieved, we will have sufficient funds to execute its business plans. The financial



Page 7 of 30


Table of Contents


statements do not include any adjustments relating to the recoverability and classification of asset carrying amounts or the amount and classification of liabilities that might result should we be unable to continue as a going concern.  

 

2. Basis of Presentation and Summary of Significant Accounting Policies.


Our accompanying condensed financial statements have been prepared by us in accordance with generally accepted accounting principles in the United States of America, or GAAP, in conjunction with the rules and regulations of the U. S. Securities and Exchange Commission, or the SEC. Certain information and footnote disclosures required for annual financial statements have been condensed or excluded pursuant to SEC rules and regulations. Accordingly, our accompanying condensed financial statements do not include all of the information and footnotes required by GAAP for complete financial statements. Our accompanying condensed financial statements reflect all adjustments which are, in our view, of a normal recurring nature and necessary for a fair presentation of our financial position, results of operations and cash flows for the interim period. Interim results of operations are not necessarily indicative of the results to be expected for the full year; such full year results may be less favorable.


In preparing our accompanying financial statements, management has evaluated subsequent events through the financial statement issuance date. We believe that although the disclosures contained herein are adequate to prevent the information presented from being misleading, our accompanying condensed financial statements should be read in conjunction with our audited consolidated financial statements and the notes thereto included in our 2012 Annual Report on Form 10-K, as filed with the SEC on April 1, 2013.


Cash and Cash Equivalents


We maintain the majority of its cash accounts at a commercial bank. The total cash balance is insured by the Federal Deposit Insurance Corporation (“FDIC”) up to $250,000 per commercial bank. For purposes of the statement of cash flows we consider all cash and highly liquid investments with initial maturities of one year or less to be cash equivalents.


Cash and cash equivalents consisted of the following as of:


 

June 30, 2013

December 31, 2012

Cash and bank balances

 $              340,072

 $                  19,260


Estimates


The preparation of financial statements in conformity with GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Such estimates may be materially different from actual financial results. Significant estimates include the recoverability of long-lived assets, the collection of accounts receivable and valuation of inventory and reserves.


Accounts Receivable


We grant credit to its customers located within the United States of America; and do not require collateral. Our ability to collect receivables is affected by economic fluctuations in the geographic areas and industries served by us.


Reserves for un-collectable amounts are provided, based on past experience and a specific analysis of the accounts.  Although we expect to collect amounts due, actual collections may differ from the estimated amounts. As of June 30, 2013, we had a reserve for potentially un-collectable accounts of $59,000.  Six (6) customers accounted for approximately 53% of accounts receivable at June 30, 2013 and one customer



Page 8 of 30


Table of Contents


accounted for 15% and no other customer accounted for more than 13% of the accounts receivable balance. Our trade accounts primarily represent unsecured receivables.  Historically, our bad debt write-offs related to these trade accounts have been insignificant.


Inventory


Inventories are valued at the lower of weighted average cost or market value. Our industry experiences changes in technology, changes in market value and availability of raw materials, as well as changing customer demand.  We make provisions for estimated excess and obsolete inventories based on regular audits and cycle counts of our on-hand inventory levels and forecasted customer demands and at times additional provisions are made.  Any inventory write offs are charged to the reserve account. As of June 30, 2013, we had a reserve for potentially obsolete inventory of $185,000.  


Inventories by major classification were comprised of the following as of:


 

June 30, 2013

December 31, 2012

Raw Material

 $                  739,981

 $                  658,241

Work in Process

135,339

156,175

Finished Goods

10,486

5,426

Total

885,806

816,561

Less reserve for excess or obsolete inventory

                   (185,000)

                   (190,000)

Total Inventory

 $                  700,806

 $                  629,841


Property and Equipment


Property and equipment are stated at cost. Assets held under capital leases are recorded at lease inception at the lower of the present value of the minimum lease payments or the fair market value of the related assets.  The cost of ordinary maintenance and repairs is charged to operations. Depreciation and amortization are computed on the straight-line method over the following estimated useful lives of the related assets:

 

                Furniture and fixtures                                                          3 to 7 years

                Equipment                                                                           7 to 10 years

                Leasehold improvements                                                     2 years (life of the lease)


Property and equipment were comprised of the following at:


 

June 30, 2013

December 31, 2012

Furniture and Equipment

 $              2,089,445

 $              2,055,778

Accumulated Depreciation

                (1,940,665)

                (1,924,193)

Net Fixed Assets

$                 148,780

$                 131,585


Long –Lived Assets


Our management assesses the recoverability of its long-lived assets by determining whether the depreciation and amortization of long lived assets over their remaining lives can be recovered through projected undiscounted future cash flows. The amount of long-lived asset impairment if any, is measured based on fair value and is charged to operations in the period in which long-lived assets impairment is determined by management. There can be no assurance however, that market conditions will not change or demand for our services will continue, which could result in impairment of long-lived assets in the future.

 



Page 9 of 30


Table of Contents



Revenue Recognition

 

Revenue from product and services are recognized at the time goods are shipped or services are provided to the customer, with an appropriate provision for returns and allowances. Terms are generally FOB origination with the right of inspection and acceptance. We have not experienced a material amount of rejected or damaged product.

 

The Company provides services for its customers that range from contract design to original product design to repair services. The Company recognizes service revenue when the services have been performed, and the related costs are expensed as incurred.

 

Fair Value of Financial Instruments

 

The carrying amount of accounts payable and accrued expenses are considered to be representative of their respective fair values because of the short-term nature of these financial instruments.

 

Other Comprehensive Income

 

We have no material components of other comprehensive income (loss) and accordingly, net loss is equal to comprehensive loss in all periods.


Research and Development

 

Research and Development Costs incurred in association with the alternative fuels technology development (which include salaries and equipment) were expensed as incurred.  We expensed $0 in R&D during the six months ended June 30, 2013 and 2012. 

 

 Segment Disclosure     

 

FASB Codification Topic 280, Segment Reporting, establishes standards for reporting financial and descriptive information about an enterprise’s reportable segments. We have determined that we have one reportable segment, with contract electronics manufacturing. As such, our operations have been aggregated into one reportable segment for all periods presented.


Acquisition of Trident Manufacturing


On March 15, 2013, we entered into an Agreement and Plan of Acquisition with Trident Manufacturing, Inc., a Utah corporation, (“Trident”), and the shareholders of Trident, to acquire 100% of the issued and outstanding common stock shares of Trident. Trident is a full-service electronics manufacturing service company with a 16,000 sq. ft. manufacturing facility based in Salt Lake City, Utah and has been servicing the industrial, aerospace, military, instrumentation, and medical markets since 2005.


On March 20, 2013, we completed the acquisition of Trident whereby we acquired 100% of the issued and outstanding common stock shares of Trident and all its operational assets in exchange for 1,600,000 shares of our restricted shares of common stock. As a result of the acquisition, Trident has become a wholly-owned subsidiary of Probe Manufacturing, Inc.  As a result we recognized $420,673 in goodwill.


The allocation of the purchase price and adjustment to stockholders’ equity is summarized in the tables below:




 

 

Net book value of the company's net assets acquired  

 

 

 

 Cash

$

4,472 

 Inventory-net

19,254 

 Accounts Receivable-net

195,146 

 Other Assets

46,620 

 Accounts payable and accrued expenses

(361,055)

 Notes payable

(167,416)

 Net Assets Acquired

$

(262,978)



 

 

Adjustments to Stockholders equity

 

 

 

 Reduction Opening balance Equity

$

(18,419)

 Adjustment to accumulated deficit

281,397 

 Net Asset Adjustment to equity

$

262,978 

 

 3. Share Based Compensation   


The company has adopted the use of Statement of Financial Accounting Standards No. 123R, “Share-Based Payment” (SFAS No. 123R) (now contained in FASB Codification Topic 718, Compensation-Stock Compensation, or Topic 718), which supersedes APB Opinion No. 25, “Accounting for Stock Issued to Employees”, and its related implementation guidance and eliminates the alternative to use Opinion 25’s intrinsic value method of accounting that was provided in Statement 123 as originally issued. This Statement requires an entity to measure the cost of employee services received in exchange for an award of an equity instruments, which includes grants of stock options and stock warrants, based on the fair value of the award, measured at the grant date, (with limited exceptions). Under this standard, the fair value of each award is estimated on the grant date, using an option-pricing model that meets certain requirements. We use the Black- Scholes option-pricing model to estimate the fair value of our equity awards, including stock options and warrants. The Black-Scholes model meets the requirements of Topic 718; however the fair values generated may not reflect their actual fair values, as it does not consider certain factors, such as vesting requirements, employee attrition and transferability limitations. The Black-Scholes model valuation is affected by our stock price and a number of assumptions, including expected volatility, expected life, risk-free interest rate and expected dividends. We estimate the expected volatility and estimated life of our stock options at grant date based on historical volatility; however, due to the thinly traded nature of our stock, we have chosen to use an average of the annual volatility of like companies in our industry. For the “risk-free interest rate”, we use the Constant Maturity Treasury rate on 90 day government securities. The term is equal to the time until the option expires. The dividend yield is not applicable, as the company has not paid any dividends, nor do we anticipate paying them in the foreseeable future. The fair value of our restricted stock is based on the market value of our free trading common stock, on the grant date calculated using a 20 trading day average. At the time of grant, the share based-compensation expense is recognized in our financial statements based on awards that are ultimately expected to vest using historical employee attrition rates and the expense is reduced accordingly.  It is also adjusted to account for the restricted and thinly traded nature of the shares.  The expense is reviewed and adjusted in subsequent periods if actual attrition differs from those estimates.


We re-evaluate the assumptions used to value our share-based awards on a quarterly basis and if changes warrant different assumptions, the share-based compensation expense could vary significantly from the amount expensed in the past. We may be required to adjust any remaining share-based compensation expense, based on any additions, cancellations or adjustments to the share based awards. The expense is recognized over the period during which an employee is required to provide service in exchange for the



Page 11 of 30


Table of Contents


award—the requisite service period (usually the vesting period). No compensation cost is recognized for equity instruments for which employees do not render the requisite service. For the six months ended, June 30, 2013 and 2012 we recognized $2,124 and $13,300, respectively.


The following table summarizes the Company’s stock-based compensation expense:


 

Un-audited

Un-audited

 

Three month period ended

Six month period ended

 

June 30,

June 30,

 

2013

2012

2013

2012

 

 

 

 

 

Stock based compensation expense

 $              0

 $              10,000

 $              2,124

 $              13,300


4. Net Profit / (Loss) per Common Share      


Basic profit / (loss) per share is computed on the basis of the weighted average number of shares of our common Stock outstanding.  As of June 30, 2013, we had outstanding common stock shares of 23,251,945 used in the calculation of basic earnings per share. Basic Weighted average common stock shares and equivalents for the six months ended June 30, 2013, were 21,025,790. As of June 30, 2013, we had outstanding warrants to purchase 800,000 additional common stock shares, options to purchase 110,386 additional common stock shares and common stock shares to be issued of 2,000,000, which may dilute future earnings per share, however, these were excluded from the calculation of fully diluted earnings per share, as they were anti dilutive in effect.

.

5. Income Taxes


The Company accounts for income taxes under SFAS No. 109 (now contained in FASB Codification Topic 740-10-25, Accounting for Uncertainty in Income Taxes), which requires the asset and liability approach to accounting for income taxes.  Under this method, deferred tax assets and liabilities are measured based on differences between financial reporting and tax bases of assets and liabilities measured using enacted tax rates and laws that are expected to be in effect when differences are expected to reverse. As of June 30, 2013, we had a net operating loss carry forward of $(585,667) and a deferred tax asset of $199,195 using the statutory rate of 34%. The deferred tax asset may be recognized in future periods, not to exceed 20 years.  However, due to the uncertainty of future events we have booked valuation allowance of $199,195.

 

 

 

June 30, 2013

Deferred Tax Asset

$

199,195 

Valuation Allowance

(195,195)

Deferred Tax Asset (Net)

$


6.  Accrued Expenses


Accrued expenses were comprised of the following at:


 

June 30, 2013

December 31, 2012

 

 

 

Accrued Wages

$

25,799

$

28,362

 Accrued Interest

5,764

4,549

Accrued Rent

48,190

48,190

 Accrued Vacation

24,567

24,567

 Total Accrued Expenses

$

$104,970

$

105,668




Page 12 of 30


Table of Contents



7. Notes Payable


On February 18, 2011 we entered into an Accounts Receivable Purchasing Agreement (the “ARPA”) with DSCH Capital Partners, LLC d/b/a Far West Capital (“FWC”), an unaffiliated third party.  Pursuant to the ARPA, FWC may purchase, in its sole discretion, eligible accounts receivable of our company on a revolving basis up to a maximum of $750,000.  Under the terms of the ARPA, FWC may purchase eligible receivables from us with full recourse for the face amount of such eligible receivables less a discount of 1.0%.  In addition, we are required to pay FWC a monthly cost of funds fee equal to the net funds employed by FWC at a rate equal to the Wall Street Journal Prime Lending Rate plus 4.75%, with a floor of 7.00%.  FWC will retain 20% of the purchase price of the receivables as a reserve amount.

 

The ARPA also provides that FWC has the right to require us to repurchase any purchased accounts receivable: (a) if there is a dispute as to the validity of such receivable by the account debtor, (b) if certain covenants, warranties or representations made by us with respect to such receivables are breached, (c) upon and during the continuance of an event of default under the ARPA or upon the termination of the ARPA, or (d) if such receivable remains unpaid 90 days after the invoice date.  The ARPA has an initial term of one year with automatic renewals for successive one-year periods. Notwithstanding that, FWC may terminate the ARPA at any time upon 90 days prior written notice or without notice upon and during the continuance of an event of default.

 

Additionally, provided there does not exist an event of default under the ARPA or the rider thereto (the “Rider”), FWC may make advances to or for the benefit of the company  in an aggregate amount up to and not to exceed  $250,000.00 from time to time during the term of the Rider and upon our request therefore, which advances shall be subject to all of the terms and conditions of the ARPA and shall be revolving consisting of advances against our  eligible inventory as defined in the Rider as follows: (i) the advances against eligible inventory, at FWC’s discretion, will be in amounts up to the sum 50% of all eligible inventory; provided, however, the advances against eligible inventory shall at no time exceed 33% of the net outstanding purchased accounts under the ARPA plus the outstanding amount due, or net funds employed, from advances made on eligible inventory within conditions contained within the Rider. The balance cap percentage shall be 25% after 120 days from date of the Rider.  Eligible inventory will be valued at the lower of cost or market value.


Related Party – Notes payable


We entered into an unsecured term note, dated November 03, 2009, payable to Linwood Goddard, our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of June 30, 2013 the outstanding balance was $4,332.  


We entered into an unsecured term note, dated December 24, 2009, payable to Linwood Goddard our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of June 30, 2013 the outstanding balance was $4,332.


On February 15, 2013 we entered into a convertible promissory note with Luxus Micro Cap S.A. for $120,000.  The note bears interest at the rate of 10% simple interest and is convertible at $0.10 per share and is due on February 15, 2015.  On May 22, 2013 this note was converted into 1,200,000 shares of common stock.


8.  Commitments and Contingencies


Operating Rental Leases

 

On October 14, 2009 we entered into a 5 year lease with Bernard family trust, with a commencement date of December 31, 2009. The facility is approximately 19,701 square feet and located at 17475 Gillette, Irvine CA, 92614.



Page 13 of 30


Table of Contents



On March 28, 2011 we signed an amendment to our facility lease with an increase of 1,600 square feet. The increase in the lease commences on April 1, 2011 and continues through year five.  The amended lease has the following payments:

 

 

Original Lease

Amended lease

Year

Monthly Rent

Monthly Rent

1

7,880

7,880

2

9,850

10,650

3

10,835

11,715

4

11,820

12,780

5

12,805

13,845


On August 7, 2013, we held our initial closing of our Series D Preferred Stock private financing offering with two related parties, whereby we received $750,000 in financing, $500,000 of which was received in a first tranche on June 17, 2013.  Our Series D Preferred Stock offering terms allow us to raise up to $1,000,000 US with an over-allotment of $500,000 in multiple closings over the course of 6 months.

The following are primary terms of the Series D Preferred Stock Offering.  The Series D Preferred holders will be paid a special monthly divided at the rate of 17.5% per annum or at the option of the Investor such special may accrue such special dividends.  If the Company does not pay the special dividend within five (5) business days from the end of the calendar month for which the payment of such dividend to owed, the Company will pay the investor a penalty of 3.5%. Any unpaid or accrued special dividends will be paid upon a liquidation or redemption. For any other dividends or distributions, participation with common stock on an as-converted basis. The Series D Preferred holders may elect to convert the Series D Preferred Stock, in his sole discretion, at any time after a one year (1) year holding period, by sending the Company a notice to convert.  The conversion rate shall equal to the greater of $0.08 or a 20% discount to the average of the three (3) lowest closing market prices of the common stock during the ten (10) trading day period prior to conversion. The Series D Preferred shall be redeemable from funds legally available for distribution at the option of the individual holders of the Series D Preferred commencing any time after the one (1) year period from the Closing (the “Redemption Period”) at a price equal to the Purchase Price plus all accrued but unpaid dividends.  If Company is not in financial position to pay it back it need to notify the Investors thirty (30) days prior the Redemption Period commencing and both parties will negotiate in good faith for an extension of the Redemption Period.  Notwithstanding, the Company may elect to redeem the Series D Preferred shares any time after the Closing at a price equal to Purchase Price plus all accrued but unpaid dividends subject to the Investors right to convert by providing the Investors written notice about its intent to redeem whereby the Investor shall have the right to convert per the terms of the conversion terms at least ten (10) days prior to such redemption by the Company.


Litigation


We are not presently subject to any material litigation nor, to our knowledge, is any material litigation threatened against us, which if determined unfavorably to us, would have a material adverse effect on our financial position, results of operations or cash flows.



9.  Capital Stock Transactions


For the six months ended June 30, 2013, we issued the following securities without registration under the Securities Act of 1933, as amended. These securities were issued on the reliance of an exemption provided by Section 4(2) of the Securities Act.


On January 21, 2013 we issued 100,000 shares of common stock as for legal services.




Page 14 of 30


Table of Contents


On January 21, 2013 we issued 10,000 shares of common stock for consulting services.


On January 21, 2013 we issued 10,000 shares of common stock to employees as additional compensation.


One January 25, 2013, we issued 400,000 shares to our Chief Financial Officer, John Bennett, pursuant to his employment agreement with the Company.


On February 15, 2013 we entered into a convertible promissory note with Luxus Micro Cap S.A. for $120,000.  The note bears interest at the rate of 10% simple interest and is convertible at $0.10 per share and is due on February 15, 2015.  On May 22, 2013 this note was converted into 1,200,000 shares of common stock.


Common Stock


Our Articles of Incorporation authorizes us to issue 400,000,000 shares of common stock, par value $0.001 per share. As of June 30, 2013 there were 23,251,945 shares of common stock issued and outstanding, respectively. All outstanding shares of common stock are, and the common stock to be issued will be, fully paid and non-assessable.  Each share of our common stock has identical rights and privileges in every respect. The holders of our common stock are entitled to vote upon all matters submitted to a vote of our shareholders and are entitled to one vote for each share of common stock held. There are no cumulative voting rights.


The holders of our common stock are entitled to share equally in dividends and other distributions that our Board of Directors may declare from time to time out of funds legally available for that purpose, if any, after the satisfaction of any prior rights and preferences of any outstanding preferred stock. If we liquidate, dissolve or wind up, the holders of shares of common stock will be entitled to share ratably in the distribution of all of our assets remaining available for distribution after satisfaction of all our liabilities and our obligations to holders of our outstanding preferred stock.


Reverse Stock Split


Effective January 22, 2013, we completed a one-for-ten reverse stock split of the Company's issued and outstanding shares of common stock. The reverse stock split was previously approved by the our board of directors and by shareholders at the 2012 Annual General Meeting of Shareholders held on November 28, 2012. Upon effectiveness of the reverse stock split, each ten (10) shares of the company's issued and outstanding common stock was automatically combined and converted into one (1) issued and outstanding share of common stock. This reduced the number of issued and outstanding shares of the company's common stock from approximately 200 million to approximately 20 million. The reverse stock split affected only the issued and outstanding shares of the company's common stock, as well as common stock underlying stock options outstanding immediately prior to the effectiveness of the reverse stock split. The number of authorized shares of the company's common stock was not affected by the reverse split. All Shares referenced in this report have been retroactively adjusted to reflect the post-split shares.


Preferred Stock


Our Articles of Incorporation authorize us to issue 10,000,000 shares of preferred stock.  We authorized 440 shares of Series A Convertible Preferred Stock and 20,000 shares of Series B Convertible Preferred Stock.  On May 25, 2006 the Articles of Incorporation were amended authorizing 15,000 shares Series C Convertible Preferred Stock. As of August 20, 2006 all shares preferred stock has been converted into common stock and there were no outstanding preferred shares as of June 30, 2013.


On August 7, 2013, we held our initial closing of our Series D Preferred Stock private financing offering with two related parties, whereby we received $750,000 in financing, $500,000 of which was received in a first tranche on June 17, 2013.  Our Series D Preferred Stock offering terms allow us to raise up to $1,000,000 US with an over-allotment of $500,000 in multiple closings over the course of 6 months.



Page 15 of 30


Table of Contents


The following are primary terms of the Series D Preferred Stock Offering.  The Series D Preferred holders will be paid a special monthly divided at the rate of 17.5% per annum or at the option of the Investor such special may accrue such special dividends.  If the Company does not pay the special dividend within five (5) business days from the end of the calendar month for which the payment of such dividend to owed, the Company will pay the investor a penalty of 3.5%. Any unpaid or accrued special dividends will be paid upon a liquidation or redemption. For any other dividends or distributions, participation with common stock on an as-converted basis. The Series D Preferred holders may elect to convert the Series D Preferred Stock, in his sole discretion, at any time after a one year (1) year holding period, by sending the Company a notice to convert.  The conversion rate shall equal to the greater of $0.08 or a 20% discount to the average of the three (3) lowest closing market prices of the common stock during the ten (10) trading day period prior to conversion. The Series D Preferred shall be redeemable from funds legally available for distribution at the option of the individual holders of the Series D Preferred commencing any time after the one (1) year period from the Closing (the “Redemption Period”) at a price equal to the Purchase Price plus all accrued but unpaid dividends.  If Company is not in financial position to pay it back it need to notify the Investors thirty (30) days prior the Redemption Period commencing and both parties will negotiate in good faith for an extension of the Redemption Period.  Notwithstanding, the Company may elect to redeem the Series D Preferred shares any time after the Closing at a price equal to Purchase Price plus all accrued but unpaid dividends subject to the Investors right to convert by providing the Investors written notice about its intent to redeem whereby the Investor shall have the right to convert per the terms of the conversion terms at least ten (10) days prior to such redemption by the Company.


Stock Repurchase Program


On November 1, 2011, the Company adopted a plan to repurchase up to 5,000,000 shares of its issued and outstanding common stock in accordance with the guidelines specified in Rule 10b-18 and Rule 10b5-1 of the Securities Exchange Act of 1934, as amended.


The plan allows the Company to purchase its issued and outstanding common shares in the open market or in negotiated transactions, from time to time, depending on market conditions and other factors as well as being subject to relevant rules under Untied States securities regulations. The plan does not obligate the Company to make any purchases, at any specific time or in any particular situation. The plan may be suspended or discontinued at any time at the sole discretion of the Company. Share repurchases will be funded with the Company's available cash, after determining the working capital requirements of the Company. Accordingly, there is no guarantee as to the exact number of shares that will be repurchased under the plan.


The company's Board of Directors authorized the repurchase plan because it believes recent market conditions may have caused the Company's common stock to be undervalued. The timing and number of any shares repurchased will depend on the terms and conditions of the plan and no assurance can be given that any specific amount of common stock will be repurchased.


As of June 30, 2013, we had repurchased 21,100 shares of our common stock.


Warrants


Series E – Common Stock warrants


On April 8, 2011, we issued 300,000 series E Warrants.  Each warrant gives the holder the right to purchase 1 share of common stock (300,000 total shares) at $0.50 per share. The Series E Warrants will expire on April 8, 2016.


Series F & G – Common Stock warrants

See Note 11. Subsequent Events for a description of the Series F & G Common Stock Warrants to be issued in our Series D Preferred Stock private offering.




Page 16 of 30


Table of Contents


Warrants Activity for the Period and Summary of Outstanding Warrants


A summary of warrant activity for the periods is as follows:


 

 

 Warrants - Common Share Equivalents

Weighted Average Exercise price

 

 Warrants exercisable - Common Share Equivalents

Weighted Average Exercise price

Outstanding December 31, 2012

300,000

0.50

 

300,000

0.50

 

Granted

500,000

0.15

 

500,000

0.15

 

Expired

-

-

 

-

-

 

Exercised

-

-

 

-

-

Outstanding June 30, 2013

800,000

0.50

 

800,000

0.50



Note: The weighted average exercise price has been adjusted retroactively due to price decreases in the warrant strike prices.





 

Warrants Outstanding

 

 Warrants Exercisable

Range of Warrant Exercise Price

 Warrants - Common Share Equivalents

Weighted Average Exercise price

Weighted Average Remaining Contractual life in years

 

 Warrants - Common Share Equivalents

Weighted Average Exercise price

$                    0.50

300,000

$0.50

3.02

 

300,000

$0.50

$                    0.10

250,000

$0.10

5.00

 

250,000

$0.10

$                    0.20

250,000

$0.20

5.00

 

25,000

$0.20

Total

800,000

$0.28

 

 

300,000

$0.28


Stock Options


On February 8, 2007 pursuant to our 2006 Qualified Incentive Option Plan which was adopted by our Board of Directors granted Company employees an incentive stock option to purchase up to 652,766 shares of our common stock.  These options were granted at $.173 cents, the fair market value of the Company at the time of the grant. These options expire on February 8, 2017. As of June 30, 2013, there were 194,780 outstanding options under this plan.


On February 8, 2008, we granted stock options to its key employees, to purchase up to 75,000 shares of our common stock, which was approved by our Board of Directors. These options were granted at $1.73 cents, the fair market value of the Company at the time of the grant. These options expire on February 8, 2017. As a result, we recognized share-based compensation expense in the amount of $5,313 for the year ended December 31, 2007, $2,657 for the year ended December 31, 2008; $2,656 for the year ended December 31, 2009; $2,656 for the year ended December 31, 2010 and $0 for the year ended December 31, 2011.



Page 17 of 30


Table of Contents



On February 28, 2008 our granted stock options to a key employee, to purchase up to 30,000 shares of our common stock, which was approved by our Board of Directors. These options were granted at $.33 cents, the fair market value of the Company at the time of the grant.  These options expire on February 8, 2017. As a result, we recognized share-based compensation expense in the amount of $5,574 for year ended December 31, 2008; $5,576 for the year ended December 31, 2009; $2,786 for the year ended December 31, 2010; and $0 for the year ended December 31, 2011.


On April 7, 2011 our board of directors approved of the Probe Manufacturing, Inc. 2011 Omnibus Incentive Plan to assist in attracting and retaining highly competent employees, directors and consultants to act as an incentive in motivating selected employees, directors and consultants of the Company to achieve long-term corporate objectives and to enable stock-based and cash-based incentive awards to qualify as performance-based compensation for purposes of the tax deduction limitations under Section 162(m) of the Code.

As of June 30, 2013 we have issued 500,000 shares pursuant to our 2011 Omnibus Incentive Plan.


Stock to be issued under option and warrant plans


Any shares issued under the existing option or warrant plans will come from the company’s authorized but un-issued, un-registered shares.


10.  Related Party Transactions


Kambiz Mahdi, our Chief Executive Officer, owns Billet Electronics, which is an independent distributor of electronic components. From time to time we purchase parts from Billet Electronics. In addition, from time to time we provide assembly and value added services to Billet Electronics.  In addition Billet was a supplier of parts and had dealings with current and former customers of our company. Our board of directors has approved such transactions of our chief executive officer.


We entered into an unsecured term note, dated November 03, 2009, payable to Linwood Goddard, our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of June 30, 2013 the outstanding balance was $4,332.  


We entered into an unsecured term note, dated December 24, 2009, payable to Linwood Goddard our Vice President of Quality Control at a 12.00% interest rate, with a 36 month amortization and monthly payments of $334.14.  As of June 30, 2013 the outstanding balance was $4,332.


On February 15, 2013 we entered into a convertible promissory note with Luxus Micro Cap S.A. for $120,000.  The note bears interest at the rate of 10% simple interest and is convertible at $0.10 per share and is due on February 15, 2015.  On May 22, 2013 this note was converted into 1,200,000 shares of common stock.



11.  Subsequent Events


On August 7, 2013, we held our initial closing of our Series D Preferred Stock private financing offering with two related parties, whereby we received $750,000 in financing, $500,000 of which was received in a first tranche on June 17, 2013.  Our Series D Preferred Stock offering terms allow us to raise up to $1,000,000 US with an over-allotment of $500,000 in multiple closings over the course of 6 months.

The following are primary terms of the Series D Preferred Stock Offering.  The Series D Preferred holders will be paid a special monthly divided at the rate of 17.5% per annum or at the option of the Investor such special may accrue such special dividends.  If the Company does not pay the special dividend within five (5) business days from the end of the calendar month for which the payment of such dividend to owed, the Company will pay the investor a penalty of 3.5%. Any unpaid or accrued special dividends will be paid



Page 18 of 30


Table of Contents


upon a liquidation or redemption. For any other dividends or distributions, participation with common stock on an as-converted basis. The Series D Preferred holders may elect to convert the Series D Preferred Stock, in his sole discretion, at any time after a one year (1) year holding period, by sending the Company a notice to convert.  The conversion rate shall equal to the greater of $0.08 or a 20% discount to the average of the three (3) lowest closing market prices of the common stock during the ten (10) trading day period prior to conversion. The Series D Preferred shall be redeemable from funds legally available for distribution at the option of the individual holders of the Series D Preferred commencing any time after the one (1) year period from the Closing (the “Redemption Period”) at a price equal to the Purchase Price plus all accrued but unpaid dividends.  If Company is not in financial position to pay it back it need to notify the Investors thirty (30) days prior the Redemption Period commencing and both parties will negotiate in good faith for an extension of the Redemption Period.  Notwithstanding, the Company may elect to redeem the Series D Preferred shares any time after the Closing at a price equal to Purchase Price plus all accrued but unpaid dividends subject to the Investors right to convert by providing the Investors written notice about its intent to redeem whereby the Investor shall have the right to convert per the terms of the conversion terms at least ten (10) days prior to such redemption by the Company.


Investors in the Series D Preferred Stock private offering shall receive one (1) warrant to purchase 50,000 shares of common stock for every $100,000 invested in the offering at a price per share equal to $0.10 per share and one (1) warrant to purchase 50,000 shares of common stock at a price per share equal to $0.20 (the “Series F and G Warrants”).  The Series F and G Warrants be valid for a period of 5 years from the date of the Closing. The amount and price per share shall be subject to adjustments for stock dividends, splits, combinations and similar events.



Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operation

 

Unless otherwise specifically stated, references in this report to “Probe,” “PMI,” “the Company,” “we,” “us,” “our” and similar terms mean Probe Manufacturing, Inc. and its subsidiaries.

 

This report on Form 10-Q contains forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended, and Section 27A of the Securities Act of 1933, as amended. The words “expects,” “anticipates,” “believes,” “intends,” “plans” and similar expressions identify forward-looking statements. In addition, any statements which refer to expectations, projections or other characterizations of future events or circumstances are forward-looking statements. We undertake no obligation to publicly disclose any revisions to these forward-looking statements to reflect events or circumstances occurring subsequent to filing this Form 10-Q with the Securities and Exchange Commission. These forward-looking statements are subject to risks and uncertainties, including, without limitation, those risks and uncertainties discussed in this section, as well as any risks and uncertainties discussed in Part II, Item 1A, “Risk Factors” of this report on Form 10-Q, and in Part I, Item 1A, “Risk Factors” and in Part II, Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the year ended December 31, 2012. In addition, new risks emerge from time to time and it is not possible for management to predict all such risk factors or to assess the impact of such risk factors on our business. Accordingly, our future results may differ materially from historical results or from those discussed or implied by these forward-looking statements. Given these risks and uncertainties, the reader should not place undue reliance on these forward-looking statements.


OVERVIEW


Probe Manufacturing Industries, Inc. was incorporated on July 7, 1995. On April 21, 2005, the Company was re-domiciled from California to Nevada, and changed its name to Probe Manufacturing, Inc. (the “Company,” “Probe,” or “PMI”). We provide global design and manufacturing services to original electronic equipment manufacturers (OEM) from our 23,000 sq-ft facility in Irvine, California and Trident Manufacturing’s 16,000 sq-ft facility in Salt Lake City, Utah, which we acquired in the first quarter of 2013. Our revenue is generated from sales of our services primarily to customers in the medical device,



Page 19 of 30


Table of Contents


aerospace/military, telecommunication, alternative fuel, industrial and instrumentation product manufacturers. We provide our domestic customers with low cost, flexible and scalable manufacturing services. We utilize innovative manufacturing solutions, automated management systems and global sourcing strategies to provide our customers with onshore, scalable manufacturing solutions. The services that we provide are commonly referred to as Electronics Manufacturing Services (EMS). Our EMS offerings include new product introduction, collaborative design, procurement and materials management, product manufacturing, product warranty repair, and end-of-life support. We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to production and direct order fulfillment. Our engineering services include product design, printed circuit board layout, prototyping, and test development. Our supply chain management solutions include purchasing, management of materials, and order fulfillment. Our manufacturing services include printed circuit board assembly, cable assembly, mechanical assembly, and fully integrated box build systems for high complexity electronics.

 

The majority of our revenue is driven from manufacturing a mix of complex printed circuit board assemblies (PCB), and box build assemblies.  Some examples of our customer’s finished goods products includes Ultrasound Therapeutic medical devices, electronic control units that help vehicles run on natural gas or hydrogen, electronic control units for precision laser welding equipment, PCB’s for landing gear systems and flap controllers, fluid control units for airliners, and devices for defense industry.


Our strategy is to build and pursue global opportunities leveraging core competencies and to expand our manufacturing foundry platform for innovative start-ups and technology companies in return for manufacturing rights and equity.

 

As innovation, cost, and time to market become hyper-competitive, domestic OEM’s are now compelled to use EMS partners with easy onshore access, providing local program management during product conceptualization, development, and integration.  Many of the mid-tier OEMs in industries such as military/aerospace, medical, industrial/instrumentation, and green-tech products tend to be too small for $1 billion-plus revenue EMS companies. Most of these OEMs value close proximity and the ability to provide complex manufacturing and personal customer service, which often favors regional providers that truly value and foster their relationships.

 

Furthermore, with the recent cost increases in labor, currency movements and freight concerns, the ability to also provide near-shore manufacturing is expected to generate increased interest. The low to medium EMS market compared to high volume has proved to be a higher margin with higher gross profits and sustained growth momentum. Our target accounts are mid-tier, U.S. based OEMs with annual sales from $15 million to $500 million.

 

 

We believe that the combination of: (i) our management expertise; (ii) low overhead and cost structure; (iii) sophisticated management system developed internally to oversee operational systems; (iv) innovative manufacturing solutions and now multiple domestic facilities; and (v) global sourcing solutions and domestic customer centric program management team, PMI is well positioned to take advantage of the projected increase in outsourced onshore manufacturing.


Our Products and Services

 

Engineering.  Our global engineering team supports technology customers and innovative start-ups with a broad range of electrical, mechanical and software engineering services. PMI has assembled a team of experts from around the globe to assist customers at any point in the design cycle.  These services include design processes from electrical, software, mechanical, Industrial and PCB design. Utilization of PMI’s design services will enable rapid market entry for our customers. It provides flexibility by becoming the extension of their engineering and allowing customers to focus on their business strategy.

Supply Chain Management.  PMI’s supply chain solution provides maximum flexibility and responsiveness through a collaborative and strategic approach with our customers. PMI can assume supply chain



Page 20 of 30


Table of Contents


responsibility from component sourcing through delivery of finished product. PMI’s supply chain focus is on building internal and external systems and relationships, which allow us to capitalize on our expertise to align with our customer’s objectives and integrate with their processes today and in the future.

Manufacturing.  Flexibility, responsiveness, communication, global supply chain management and speed are key values in what we offer our customers. We establish clear communication about our customer needs and requirements enabling a seamless integration with their objectives and processes. PMI’s manufacturing capability supports high and low-mix assemblies for prototypes, to medium-volume quantities in California and high-volume production in Asia. Our manufacturing operations include printed circuit board assembly and testing; cable and harness assembly; mechanical assembly; and complex system integration.

 

GOING CONCERN


The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. The Company had a total stockholder’s equity of $791,604 and a working capital surplus of $182,128; however, we still had net loss of $(231,012) for the six months ended June 30, 2013 and an accumulated deficit of $(867,268) as of June 30, 2013. Therefore, the ability of the Company to operate as a going concern is still dependent upon its ability to: (1) obtain sufficient debt and/or equity capital; and/or (2) generate positive cash flow from operations.


Our operating results are affected by a number of factors, including the following:

 

·             changes in the macro-economic environment and related changes in consumer demand;

 

·             the mix of the manufacturing services we are providing, the number and size of new manufacturing programs, the degree to which we utilize our manufacturing capacity, seasonal demand, shortages of components and other factors;

 

·             the effects on our business when our customers are not successful in marketing their products, or when their products do not gain widespread commercial acceptance;

 

·             our components offerings which have required that we make substantial investments in the resources necessary to design and develop these products;


·             our ability to achieve commercially viable production yields and to manufacture components in commercial quantities to the performance specifications demanded by our OEM customers;

 

·             our customers ability to cancel or delay orders or change production quantities;

 

·             our customers decision to choose internal manufacturing instead of outsourcing for their product requirements;

 

·    our exposure to financially troubled customers; and

 

·             integration of acquired businesses and facilities.


CRITICAL ACCOUNTING POLICIES AND ESTIMATES

 

The preparation of financial statements in conformity with U.S. GAAP requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities, the disclosure of contingent assets and liabilities at the date of the financial statements, and the reported amounts of revenues and expenses during the reporting period. Actual results may differ from those estimates and assumptions.

 



Page 21 of 30


Table of Contents


Refer to the accounting policies under Item 7, “Management’s Discussion and Analysis of Financial Condition and Results of Operations” in our Annual Report on Form 10-K for the fiscal year ended December 31, 2012, where we discuss our more significant judgments and estimates used in the preparation of the condensed consolidated financial statements.


RESULT OF OPERATIONS


The following table sets forth, for the periods indicated, certain statements of operations data expressed as a percentage of net sales. The financial information and the discussion below should be read in conjunction with the condensed consolidated financial statements and notes thereto included in this document. In addition, reference should be made to our audited consolidated financial statements and notes thereto and related Management’s Discussion and Analysis of Financial Condition and Results of Operations included in our 2012 Annual Report on Form 10-K.




Page 22 of 30


Table of Contents




Probe Manufacturing, Inc.

Statement of Operations

for the three and six month periods ended

 June 30, 2013 and 2012, respectively

 

 

 

 

 

 

Un-audited

Un-audited

 

Three month period ended

Six month period ended

 

2013

2012

2013

2012

 

 

 

 

 

Sales

 $   1,023,338

 $   1,603,285

 $   1,735,995

 $   2,889,153

Cost of Goods Sold

         650,214

      1,143,532

      1,186,831

      2,064,648

Gross Profit

         373,124

         459,753

         549,164

         824,505

 

 

 

 

 

General And Administrative

         441,731

         325,266

         731,162

         629,663

Share Based Compensation

                   -   

           10,000

             2,124

           13,300

Net Profit / (Loss) From Operations

         (68,607)

         124,487

       (184,122)

         181,542

 

 

 

 

 

Other Income / (Expenses)

           55,777

                133

           55,777

                230

Interest Expense

         (72,246)

         (53,167)

       (102,667)

         (97,601)

Net Profit / (Loss) Before Income Taxes

         (85,076)

           71,453

       (231,012)

           84,171

Income Tax Expense

                     -

                     -

                     -

                     -

Net Profit / (Loss)

 $      (85,076)

 $        71,453

 $    (231,012)

 $        84,171



Net Sales 


For the six-month period ended June 30, 2013, we had a net sales of $1,735,995, compared to net sales of $2,889,153 for the same period in 2012.   

Our top five customers accounted for approximately 62% of our net sales for the six-month period ended June 30, 2013, compared to 61%, for the same period in 2012. We believe that our ability to grow our core business depends on increasing sales to existing customers, and on successfully attracting new customers. Customer contracts can be canceled and volume levels can be changed or delayed based on our customer’s performance and the end users’ markets which we have no control over. The timely replacement of delayed, canceled or reduced orders with new business cannot be ensured. In addition, we cannot assume that any of our current customers will continue to utilize our services. Consequently, our results of operations may be materially adversely affected.


Gross Profit 


Gross profit is affected by a number of factors, including the number and size of new manufacturing programs, product mix, component costs and availability, product life cycles, unit volumes, pricing, competition, new product introductions, capacity utilization and the expansion and consolidation of manufacturing facilities. The flexible design of our manufacturing processes allows us to build a broad range of products in our facilities, which allows us to better utilize our manufacturing capacity. In the cases of new programs, profitability normally lags revenue growth due to product start-up costs, lower manufacturing program volumes in the start-up phase, operational inefficiencies, and under-absorbed overhead. Gross margin often improves over time as manufacturing program volumes increase, as our utilization rates and overhead absorption improves, and as we increase the level of vertically-integrated manufacturing services content. As a result of these various factors, our gross margin varies from period to period.



Page 23 of 30


Table of Contents


 

Gross profit during the six-month period ended June 30, 2013 was $549,164 at 32% of sales compared to $824,505 at 29% of sales for the same period in 2012, mainly attributable primarily to the more favorable product mix.


Selling, General and Administrative Expenses 


Selling, general and administrative expenses (“SG&A”) amounted to $731,162 during the three-month period ended June 30, 2013, compared to 629,663 for the same period in 2012 mainly due to the investment in our new certification programs and technical personnel.


Interest Expense


For the six month period ended June 30, 2013, our interest expense was $102,667, compared to $97,601 for the same period in 2012; this was due to the interest generated from our accounts receivable financing line referenced in Note 7 of the notes in this document.


Key performance indicators


 

June 30,

 

2013

2012

Inventory Turns

3.57

5.71

Days Sales in Backlog

133

176

Days Receivables Outstanding

62

53

Days Payables Outstanding

157

47


Inventory turns: are calculated as the ratio of cost of material compared to the average inventory for the six months ended June 30, 2013. For the six months ended June 30, 2013, our inventory turns were 3.57 compared to 5.71 for the same period in 2012.


Days Sales in Backlog is calculated based on our back log divided by average daily sales during that period.  For the six months ended June 30, 2013, days sales in backlog was 133 days compared to 176 days for the same period in 2012.  


Days receivables outstanding is calculated as the ratio of average accounts receivable during that period compared to average daily sales for the same period.  For the six months ended June 30, 2013, days receivables outstanding was 62 days compared to 53 days for the same period in 2012.  


Days Payable outstanding is calculated as the ratio of average accounts payable during that period compared to average daily sales for the same period. For the six months ended June 30, 2013, days payable outstanding was 157 days compared to 47 days for the same period in 2012.  






Page 24 of 30


Table of Contents



Liquidity and Capital Resources 


PROBE MANUFACTURING, INC.

Condensed Statements of Cash Flows

for the six months ended June 30,

 

 

 

 

Un-audited

Un-audited

 

2013

2012

Net Cash provided / (Used) In Operating Activities

 $                    (129,232)

 $                    (218,463)

Cash Flows Used In Investing Activities

                         (33,665)

                         (11,673)

Cash Flows Provided / (used)  By Financing Activities

                         483,709

                         241,586

Net (Decrease) Increase in Cash and Cash Equivalents

 $                      320,812

 $                        11,450


Accounts Receivable Financing

On February 18, 2011 we entered into an Accounts Receivable Purchasing Agreement (the “ARPA”) with DSCH Capital Partners, LLC d/b/a Far West Capital (“FWC”), an unaffiliated third party.  Pursuant to the ARPA, FWC may purchase, in its sole discretion, eligible accounts receivable of our company on a revolving basis up to a maximum of $750,000.  Under the terms of the ARPA, FWC may purchase eligible receivables from us with full recourse for the face amount of such eligible receivables less a discount of 1.0%.  In addition, we are required to pay FWC a monthly cost of funds fee equal to the net funds employed by FWC at a rate equal to the Wall Street Journal Prime Lending Rate plus 4.75%, with a floor of 7.00%.  FWC will retain 20% of the purchase price of the receivables as a reserve amount.

 

The ARPA also provides that FWC has the right to require us to repurchase any purchased accounts receivable: (a) if there is a dispute as to the validity of such receivable by the account debtor, (b) if certain covenants, warranties or representations made by us with respect to such receivables are breached, (c) upon and during the continuance of an event of default under the ARPA or upon the termination of the ARPA, or (d) if such receivable remains unpaid 90 days after the invoice date.  The ARPA has an initial term of one year with automatic renewals for successive one-year periods. Notwithstanding that, FWC may terminate the ARPA at any time upon 90days prior written notice or without notice upon and during the continuance of an event of default.


Additionally, provided there does not exist an event of default under the ARPA or the rider thereto (the “Rider”), FWC may make advances to or for the benefit of the company in an aggregate amount up to and not to exceed  $250,000.00 from time to time during the term of the Rider and upon our request therefore, which advances shall be subject to all of the terms and conditions of the ARPA and shall be revolving consisting of advances against our  eligible inventory as defined in the Rider as follows: (i) the advances against eligible inventory, at FWC’s discretion, will be in amounts up to the sum 50% of all eligible inventory; provided, however, the advances against eligible inventory shall at no time exceed 33% of the net outstanding purchased accounts under the ARPA plus the outstanding amount due, or net funds employed, from advances made on eligible inventory within conditions contained within the Rider. The balance cap percentage shall be 25% after 120 days from date of the Rider.  Eligible inventory will be valued at the lower of cost or market value.

Series D Preferred Stock Offering

On August 7, 2013, we held our initial closing of our Series D Preferred Stock private financing offering with two related parties, whereby we received $750,000 in financing, $500,000 of which was received in a first tranche on June 17, 2013.  Our Series D Preferred Stock offering terms allow us to raise up to $1,000,000 US with an over-allotment of $500,000 in multiple closings over the course of 6 months.



Page 25 of 30


Table of Contents


The following are primary terms of the Series D Preferred Stock Offering.  The Series D Preferred holders will be paid a special monthly divided at the rate of 17.5% per annum or at the option of the Investor such special may accrue such special dividends.  If the Company does not pay the special dividend within five (5) business days from the end of the calendar month for which the payment of such dividend to owed, the Company will pay the investor a penalty of 3.5%. Any unpaid or accrued special dividends will be paid upon a liquidation or redemption. For any other dividends or distributions, participation with common stock on an as-converted basis. The Series D Preferred holders may elect to convert the Series D Preferred Stock, in his sole discretion, at any time after a one year (1) year holding period, by sending the Company a notice to convert.  The conversion rate shall equal to the greater of $0.08 or a 20% discount to the average of the three (3) lowest closing market prices of the common stock during the ten (10) trading day period prior to conversion. The Series D Preferred shall be redeemable from funds legally available for distribution at the option of the individual holders of the Series D Preferred commencing any time after the one (1) year period from the Closing (the “Redemption Period”) at a price equal to the Purchase Price plus all accrued but unpaid dividends.  If Company is not in financial position to pay it back it need to notify the Investors thirty (30) days prior the Redemption Period commencing and both parties will negotiate in good faith for an extension of the Redemption Period.  Notwithstanding, the Company may elect to redeem the Series D Preferred shares any time after the Closing at a price equal to Purchase Price plus all accrued but unpaid dividends subject to the Investors right to convert by providing the Investors written notice about its intent to redeem whereby the Investor shall have the right to convert per the terms of the conversion terms at least ten (10) days prior to such redemption by the Company.



Page 26 of 30


Table of Contents



Capital Requirements for long-term Obligations


 

 

2014

2013

Notes - Payable

 

$0

$8,664

Total

 

$0

$8,664



Off-balance Sheet Arrangement


We currently have no off-balance sheet arrangements.



Item 3.  Quantitative and Qualitative Disclosure about Market Risk.


Not applicable to smaller reporting companies.


Item 4.  Controls and Procedures.


(a)

   Evaluation of disclosure controls and procedures. We maintain disclosure controls and procedures that are designed to ensure that information required to be disclosed in our reports under the Securities Exchange Act of 1934, as amended, or the Exchange Act, is recorded, processed, summarized and reported within the time periods specified in the rules and forms and that such information is accumulated and communicated to us, including our chief executive officer and our chief financial officer, as appropriate, to allow timely decisions regarding required disclosure.


As required by Rules 13a-15(b) and 15d-15(b) of the Exchange Act, an evaluation as of June 30, 2013 was conducted under the supervision and with the participation of our chief executive officer and our chief financial officer, of the effectiveness of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Exchange Act). Based on this evaluation, our chief executive officer and chief financial officer concluded that our disclosure controls and procedures, as of June 30, 2013, were effective.


(b)

Changes in internal control over financial reporting. There were no changes in our internal control over financial reporting that occurred during the quarter ended June 30, 2013 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

 


PART II--OTHER INFORMATION


Item 1.

 Legal Proceedings


None.


Item 1A.  Risk Factors.


There are no material changes from the risk factors previously disclosed in our 2012 Annual Report on Form 10-K, as filed with the United States Securities and Exchange Commission on April 1, 2013, except as disclosed below.


RISKS ABOUT OUR BUSINESS




Page 27 of 30


Table of Contents


If we cannot obtain additional financing and/or reduce our operating costs sufficiently, and the effect of other unknown adverse factors could threaten our existence as a going concern.  Therefore, we may have to curtail operations and may ultimately cease to exist.  


The financial statements have been prepared on a going concern basis, which contemplates continuity of operations, realization of assets and liquidation of liabilities in the normal course of business. The Company had a total stockholder’s equity of $791,604 and a working capital surplus of $182,128; however, we still had net loss of $(231,012) for the six months ended June 30, 2013 and an accumulated deficit of $(867,268) as of June 30, 2013. Therefore, the ability of the Company to operate as a going concern is still dependent upon its ability to: (1) obtain sufficient debt and/or equity capital; and/or (2) generate positive cash flow from operations.



We have an accumulated deficit and may incur additional losses; therefore we may not be able to obtain the additional financing needed for working capital, capital expenditures and to meet our debt service obligations.


As of June 30, 2013, we had current liabilities of $1,459,137.  As a result, our debt could limit our ability to obtain additional financing for working capital, capital expenditures, debt service requirements, or other purposes in the future, as needed; to plan for, or react to, changes in technology and in our business and competition; and to react in the event of an economic downturn.


Furthermore, On August 7, 2013, we held our initial closing of our Series D Preferred Stock private financing offering with two related parties, whereby we received $750,000 in financing, $500,000 of which was received in a first tranche on June 17, 2013.  Our Series D Preferred Stock offering terms allow us to raise up to $1,000,000 US with an over-allotment of $500,000 in multiple closings over the course of 6 months. The Series D Preferred holders will be paid a special monthly divided at the rate of 17.5% per annum or at the option of the Investor such special may accrue such special dividends.  If the Company does not pay the special dividend within five (5) business days from the end of the calendar month for which the payment of such dividend to owed, the Company will pay the investor a penalty of 3.5%.

We may not be able to meet our debt service obligations. If we are unable to generate sufficient cash flow or obtain funds for required payments, or if we fail to comply with covenants in our revolving lines of credit or dividend payments to our Series D Preferred stockholder we will be in default which will have a material adverse impact on our business and working capital.



Item 2.  Unregistered Sales of Equity Securities and Use of Proceeds


None.


Item 3.

 Defaults upon Senior Securities


None.


Item 4.

 [Removed and Reserved.]


Item 5.

 Other Information


None.


Item 6.  Exhibits


The exhibit listed on the Exhibit Index (following the signatures section of this Quarterly Report on

Form 10-Q are included, or incorporated by reference, in this Quarterly Report on Form 10-Q.




Page 28 of 30


Table of Contents


SIGNATURES



Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.


Signature                  

 Title                                

              

      Date


/s/ Kambiz Mahdi

Chief Executive Officer  

         

August 19, 2013

_______________________

Kambiz Mahdi


/s/ John Bennett

Chief Financial Officer

August 19, 2013

_______________________

John Bennett





Page 29 of 30


Table of Contents



EXHIBIT INDEX


Pursuant to Item 601(a)(2) of Regulation S-K, this Exhibit Index immediately precedes the exhibits.


The following exhibits are included, or incorporated by reference, in this Quarterly Report on Form 10-Q for the period ended June 30, 2013 (are numbered in accordance with Item 601 of Regulation S-K).



EXHIBIT

NUMBER                                         DESCRIPTION


3.1 Articles of Incorporation (included as exhibit 3.1 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)


3.2 Bylaws (included as exhibit 3.2 to the Form SB-2/A filed on June 10, 2005 and incorporated herein by reference)

 

31.1* Certification of the Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.


31.2* Certification of the Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.


32.1* Certification of Chief Executive Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.


32.2* Certification of Chief Financial Officer pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.


101.INS** XBRL Instance Document


101.SCH** XBRL Taxonomy Extension Schema Document


101.CAL** XBRL Taxonomy Extension Calculation Linkbase Document


101.LAB** XBRL Taxonomy Extension Label Linkbase Document


101.PRE** XBRL Taxonomy Extension Presentation Linkbase Document


101.DEF** XBRL Taxonomy Extension Definition Linkbase Document

________________________


*Filed herewith.


**Furnished herewith.





Page 30 of 30