Attached files

file filename
EXCEL - IDEA: XBRL DOCUMENT - VOLTERRA SEMICONDUCTOR CORPFinancial_Report.xls
EX-31.1 - EX-31.1 - VOLTERRA SEMICONDUCTOR CORPd398607dex311.htm
EX-31.2 - EX-31.2 - VOLTERRA SEMICONDUCTOR CORPd398607dex312.htm
EX-32.1 - EX-32.1 - VOLTERRA SEMICONDUCTOR CORPd398607dex321.htm
EX-32.2 - EX-32.2 - VOLTERRA SEMICONDUCTOR CORPd398607dex322.htm
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, DC 20549

 

 

FORM 10-Q

 

 

 

    x     QUARTERLY REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended September 30, 2012

OR

 

    ¨     TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from          to         

Commission file number 000-50857

 

 

Volterra Semiconductor Corporation

(Exact name of registrant as specified in its charter)

 

 

 

Delaware   94-3251865

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification No.)

47467 Fremont Blvd.

Fremont, CA 94538

(Address of principal executive offices)

Registrant’s telephone number, including area code: (510) 743-1200

 

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ¨    Accelerated filer   x
Non-accelerated filer   ¨  (Do not check if a smaller reporting company)    Smaller reporting company   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

As of October 23, 2012, the registrant had 25,052,967 shares of common stock outstanding.

 

 

 


Table of Contents

Cautionary Note Regarding Forward-Looking Statements

This quarterly report on Form 10-Q contains forward-looking statements that involve many risks and uncertainties. These statements relate to future events and our future performance and are based on current expectations, estimates, forecasts and projections about the industries in which we operate and the beliefs and assumptions of our management. In some cases, you can identify forward-looking statements by terms such as “would,” “could,” “may,” “will,” “should,” “expect,” “intend,” “plan,” “anticipate,” “believe,” “estimate,” “predict,” “potential,” “targets,” “seek,” or “continue,” the negative of these terms or other variations of such terms. In addition, any statements that refer to projections of our future financial performance, our anticipated growth and trends in our business and other characterizations of future events or circumstances are forward-looking statements. These statements are only predictions based upon assumptions made that are believed to be reasonable at the time, and are subject to risk and uncertainties. Therefore, actual events or results may differ materially and adversely from those expressed in any forward-looking statement. In evaluating these statements, you should specifically consider the risks described under “Risk Factors” in Item 1A of Part II and elsewhere in this Form 10-Q. These factors may cause our actual results to differ materially from any forward-looking statements. Except as required by law, we undertake no obligation to publicly update or revise any forward-looking statements, whether as a result of new information, future events or otherwise.

 

2


Table of Contents

Volterra Semiconductor Corporation and Subsidiaries

 

     Page  

PART I. FINANCIAL INFORMATION

  

Item 1. Financial Statements

  

Condensed Consolidated Balance Sheets as of September 30, 2012 and December 31, 2011

     4   

Condensed Consolidated Statements of Operations for the three months and nine months ended September 30, 2012 and 2011

     5   

Condensed Consolidated Statements of Cash Flows for the nine months ended September 30, 2012 and 2011

     6   

Notes to the Condensed Consolidated Financial Statements

     7   

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

     15   

Item 3. Quantitative and Qualitative Disclosures About Market Risk

     21   

Item 4. Controls and Procedures

     21   

PART II. OTHER INFORMATION

     22   

Item 1. Legal Proceedings

     22   

Item 1A. Risk Factors

     22   

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

     37   

Item 6. Exhibits

     38   

SIGNATURES

     39   

EXHIBIT 31.1

  

EXHIBIT 31.2

  

EXHIBIT 32.1

  

EXHIBIT 32.2

  

 

3


Table of Contents

PART I. FINANCIAL INFORMATION

ITEM 1. Financial Statements

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED BALANCE SHEETS

(In thousands, except per share amounts)

(Unaudited)

 

     September 30,
2012
    December 31,
2011
 
Assets     

Current assets:

    

Cash and cash equivalents

   $ 140,683      $ 126,733   

Short-term investments

     2,000        —     

Accounts receivable, net of allowances of $2,114 and $2,487, respectively

     24,329        22,399   

Inventories

     20,192        14,687   

Prepaid expenses and other current assets

     3,173        2,933   
  

 

 

   

 

 

 

Total current assets

     190,377        166,752   

Property and equipment, net

     10,813        7,905   

Other assets

     265        1,059   
  

 

 

   

 

 

 

Total assets

   $ 201,455      $ 175,716   
  

 

 

   

 

 

 
Liabilities and Stockholders’ Equity     

Current liabilities:

    

Accounts payable

   $ 6,522      $ 5,643   

Accrued liabilities

     9,499        8,299   
  

 

 

   

 

 

 

Total current liabilities

     16,021        13,942   

Lease incentive

     197        339   

Other long-term liabilities

     2,402        2,214   
  

 

 

   

 

 

 

Total liabilities

     18,620        16,495   
  

 

 

   

 

 

 

Stockholders’ equity:

    

Preferred stock, $0.001 par value; 5,000 shares authorized; none issued and outstanding

     —          —     

Common stock, $0.001 par value; 200,000 shares authorized; 28,690 and 27,847 shares issued, respectively 25,143 and 24,804 shares outstanding, respectively

     29        28   

Additional paid-in capital

     170,213        152,644   

Retained earnings

     61,478        43,206   

Treasury stock at cost, 3,547 and 3,043 shares, respectively

     (48,885     (36,657
  

 

 

   

 

 

 

Total stockholders’ equity

     182,835        159,221   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 201,455      $ 175,716   
  

 

 

   

 

 

 

The accompanying notes are an integral part of these condensed consolidated financial statements.

 

4


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS

(In thousands, except per share amounts)

(Unaudited)

 

     Three Months Ended
September 30,
    Nine Months Ended
September 30,
 
     2012      2011     2012     2011  

Net revenue

   $ 42,148       $ 41,336      $ 127,784      $ 117,210   

Cost of revenue

     17,683         17,776        53,871        50,303   
  

 

 

    

 

 

   

 

 

   

 

 

 

Gross margin

     24,465         23,560        73,913        66,907   
  

 

 

    

 

 

   

 

 

   

 

 

 

Operating expenses:

         

Research and development

     10,964         9,580        32,357        27,663   

Selling, general and administrative

     6,499         6,281        20,213        20,044   

Litigation

     804         655        2,783        3,968   
  

 

 

    

 

 

   

 

 

   

 

 

 

Total operating expenses

     18,267         16,516        55,353        51,675   
  

 

 

    

 

 

   

 

 

   

 

 

 

Income from operations

     6,198         7,044        18,560        15,232   

Non-operating expense (income), net

     9         111        (21     149   
  

 

 

    

 

 

   

 

 

   

 

 

 

Income before income taxes

     6,189         6,933        18,581        15,083   

Income tax expense (benefit)

     121         (9     309        123   
  

 

 

    

 

 

   

 

 

   

 

 

 

Net income

   $ 6,068       $ 6,942      $ 18,272      $ 14,960   
  

 

 

    

 

 

   

 

 

   

 

 

 

Net income per share:

         

Basic

   $ 0.24       $ 0.28      $ 0.72      $ 0.61   

Diluted

   $ 0.23       $ 0.26      $ 0.68      $ 0.57   

Weighted average shares outstanding:

         

Basic

     25,419         24,806        25,318        24,635   
  

 

 

    

 

 

   

 

 

   

 

 

 

Diluted

     26,638         26,198        26,770        26,168   
  

 

 

    

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of these condensed consolidated financial statements.

 

5


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

CONDENSED CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

(Unaudited)

 

     Nine Months Ended  
     September 30,  
     2012     2011  

Cash flows from operating activities:

    

Net income

   $ 18,272      $ 14,960   

Adjustments to reconcile net income to net cash provided by operating activities:

    

Stock-based compensation

     7,489        6,122   

Depreciation and amortization

     2,430        2,059   

Accretion of discount on investments

     —          (4

Loss on disposal of fixed assets

     4        32   

Provision for allowance for doubtful accounts

     3        17   

Changes in operating assets and liabilities:

    

Accounts receivable

     (1,933     (1,746

Inventories

     (5,515     (220

Prepaid expenses and other assets

     554        436   

Accounts payable

     458        303   

Accrued liabilities and long-term liabilities

     1,200        (2,788
  

 

 

   

 

 

 

Net cash provided by operating activities

     22,962        19,171   
  

 

 

   

 

 

 

Cash flows from investing activities:

    

Purchases of property and equipment

     (4,875     (3,198

Purchases of short-term investments

     (6,000     (16,996

Proceeds from maturity of short-term investments

     4,000        24,896   
  

 

 

   

 

 

 

Net cash (used in) provided by investing activities

     (6,875     4,702   
  

 

 

   

 

 

 

Cash flows from financing activities:

    

Proceeds from issuance of common stock, net

     10,368        6,094   

Repurchases of common stock

     (12,228     (4,944

Taxes paid related to net share settlement of equity awards

     (277     (101
  

 

 

   

 

 

 

Net cash (used in) provided by financing activities

     (2,137     1,049   
  

 

 

   

 

 

 

Net increase in cash and cash equivalents

     13,950        24,922   

Cash and cash equivalents, beginning of period

     126,733        86,931   
  

 

 

   

 

 

 

Cash and cash equivalents, end of period

   $ 140,683      $ 111,853   
  

 

 

   

 

 

 

Supplemental disclosure of cash flows:

    

Cash paid for income taxes

   $ 260      $ 52   

The accompanying notes are an integral part of these condensed consolidated financial statements.

 

6


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

1. Description of Business and Significant Accounting Policies

Volterra Semiconductor Corporation (the “Company” or “Volterra”) was incorporated in Delaware in 1996, and its principal offices are located in Fremont, California. The Company designs, develops and markets proprietary, high-performance analog and mixed-signal power management semiconductors.

Basis of Presentation

The accompanying condensed consolidated financial statements include the accounts of the Company and its wholly-owned subsidiaries. All significant intercompany balances and transactions have been eliminated in consolidation. The functional currency of the Company and its significant subsidiaries is the United States dollar. Foreign currency transaction gains and losses are recorded in income. For all periods presented, there have been no material foreign currency transaction or translation gains or losses.

The Company’s accompanying condensed consolidated financial statements have been prepared without audit in accordance with the rules and regulations of the Securities and Exchange Commission (SEC). Certain information and disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States have been condensed or omitted in accordance with these rules and regulations. The information in this report should be read in conjunction with the Company’s audited consolidated financial statements and notes thereto included in its 2011 annual report on Form 10-K for the fiscal year ended December 31, 2011 as filed with the SEC on March 6, 2012.

In the opinion of management, the accompanying unaudited condensed consolidated financial statements reflect all adjustments (consisting only of normal recurring adjustments) necessary to present fairly the Company’s financial position, results of operations and cash flows for the interim periods presented. The operating results for the nine months ended September 30, 2012 are not necessarily indicative of the results that may be expected for any other future interim period or full year. The condensed consolidated balance sheet as of December 31, 2011 is derived from the audited consolidated financial statements as of the year then ended.

Use of Estimates

The preparation of financial statements in conformity with generally accepted accounting principles in the United States of America requires management to make estimates and assumptions that affect the amounts reported in the financial statements and the accompanying notes.

The accounting estimates that require our most significant, difficult and subjective judgments include:

 

   

determination of sales return allowances;

 

   

the recognition and measurement of current and deferred income taxes (including the measurement of uncertain tax positions);

 

   

the valuation of inventory; and

 

   

measurement of stock-based compensation

Actual results could differ from those estimates.

Concentrations of Credit Risk

The Company sells its products to distributors and original equipment manufacturers (and their outsourced suppliers) in the computing, storage, networking, and consumer electronic industries. The

 

7


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

Company performs credit evaluations of its customers’ financial condition and generally does not require collateral from its customers. An allowance is provided for bad debts when it is probable and estimable that accounts receivable will not be collected.

Financial Instruments

Financial instruments consist of cash equivalents, short-term investments, accounts receivable, and accounts payable. The carrying value of the Company’s financial instruments approximates the respective fair value due to the relatively short maturities of these instruments. Financial instruments that potentially subject the Company to concentrations of credit risk consist principally of investments and trade accounts receivable.

The Company maintains cash, cash equivalents, and short-term investments with high credit quality financial institutions. Cash equivalents consist of highly liquid investments maturing in 90 days or less from the date of purchase. Short-term investments are comprised of U.S. Treasury and debt securities with remaining contractual maturities on the date of purchase greater than 90 days but less than one year. Investments in debt securities are classified as held-to-maturity and carried at amortized cost. The fair value of these instruments would be categorized as Level 1 of the fair value hierarchy. The following table reconciles the amortized cost to the fair value of short-term investments:

 

     As of September 30,      As of December 31,  
     2012      2011  

Amortized cost

   $ 2,000       $ —     

Unrealized gains

     —           —     
  

 

 

    

 

 

 

Fair value

   $ 2,000       $ —     
  

 

 

    

 

 

 

Segment Reporting and Significant Customers

The Company is organized and operates as a single business segment: analog and mixed-signal power management semiconductors. The Company’s chief operating decision maker, the Chief Executive Officer, reviews financial information presented on a consolidated basis for the purposes of making operating decisions and assessing financial performance.

Significant customers are those customers directly accounting for more than 10% of the Company’s net revenue or accounts receivable. For each significant customer, net revenue as a percentage of total net revenue and accounts receivable as a percentage of total accounts receivable are as follows:

 

     Net Revenue     Net Revenue     Accounts Receivable  
     Three Months Ended     Nine Months Ended     As of  
     September 30,     September 30,     September 30,     December 31,  

Customer

   2012     2011     2012     2011     2012     2011  

A

     23     19     25     17     19     15

B

     21     23     23     25     20     25

C

     13     20     14     20     16     23

D

     13     *        *        *        20     *   

E

     *        11     *        10     *        12

 

* Less than 10%

 

8


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

The Company reports its net revenue by geographic areas according to the destination to which the product was shipped. The geographic area to which a product was shipped is not necessarily the same location in which the product is ultimately used. In all periods, substantially all of the Company’s net revenue was denominated in U.S. dollars. Net revenue by geographic area was as follows:

 

     Three Months Ended     Nine Months Ended  
     September 30,     September 30,  
     2012     2011     2012     2011  

China

     69     62     67     57

Singapore

     23        28        26        31   

Taiwan

     3        3        2        3   

Japan

     2        2        2        4   

United States

     1        2        1        2   

Other

     2        3        2        3   
  

 

 

   

 

 

   

 

 

   

 

 

 
     100     100     100     100
  

 

 

   

 

 

   

 

 

   

 

 

 

Revenue Recognition

Revenue from the sale of semiconductor products is recognized upon shipment when title transfers to the customer provided that persuasive evidence of an arrangement exists, the price is fixed or determinable, and collection of the resulting receivable is reasonably assured. An allowance is recorded at the time of sale to provide for estimated future sales returns. The allowance is based upon historical experience, current trends, and the Company’s expectations regarding future return activity. Sales returns must be authorized by Volterra and are generally limited to instances of product failure under the Company’s warranty that generally provides that products will be free from defects for a limited period of time, generally not longer than twelve months.

Volterra’s sales to distributors are made under agreements that do not provide for price adjustments after purchase and provide limited return rights under the Company’s standard warranty. Revenue on these sales is recognized upon shipment when title passes to the distributor. Volterra estimates future distributor sales returns based on historical data and current business expectations and reduces revenue for estimated future returns through the allowance for sales returns.

Revenue generally is recognized net of any taxes collected from customers and subsequently remitted to governmental authorities.

Stock-Based Compensation

The cost of stock-based compensation is measured at the date of grant based on the fair value of the award that is ultimately expected to vest and is recognized as an expense over the requisite service period.

 

9


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

The effect of stock-based compensation was as follows:

 

     Three Months Ended      Nine Months Ended  
     September 30,      September 30,  
     2012      2011      2012      2011  

Stock-based compensation expense:

           

Cost of revenue

   $ 174       $ 204       $ 596       $ 571   

Research and development

     1,132         865         3,125         2,469   

Sales, general and administrative

     1,307         1,064         3,768         3,082   
  

 

 

    

 

 

    

 

 

    

 

 

 

Effect on net income

   $ 2,613       $ 2,133       $ 7,489       $ 6,122   
  

 

 

    

 

 

    

 

 

    

 

 

 

Effect on basic net income per share

   $ 0.10       $ 0.09       $ 0.30       $ 0.25   
  

 

 

    

 

 

    

 

 

    

 

 

 

Effect on diluted net income per share

   $ 0.10       $ 0.08       $ 0.28       $ 0.23   
  

 

 

    

 

 

    

 

 

    

 

 

 

The Company has not recognized any tax benefit related to stock-based compensation expense as a result of the full valuation allowance on its net domestic deferred tax assets.

Provision for Income Taxes

Income taxes are accounted for under the assets and liability method. Deferred tax assets and liabilities are recognized for future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases and operating loss and tax credit carryforwards. Deferred tax assets and liabilities are measured using enacted income tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in income in the period that includes the enactment date.

As of September 30, 2012 and December 31, 2011, the total amount of unrecognized tax benefits were $7,628 and $7,107, of which $6,469 and $6,084 would affect the effective tax rate if recognized.

The Company recognizes interest and penalties related to uncertain tax positions in income tax expense. Cumulative interest and penalties for all periods presented are immaterial.

The Company files U.S. federal, state and foreign income tax returns and is subject to examination in these jurisdictions for all tax years since inception. Although timing of the resolution or closure on audits is highly uncertain, the Company believes it is reasonably possible that the unrecognized tax benefits will immaterially change in the next 12 months.

Earnings Per Share

Basic net income per share is calculated by dividing net income by the weighted average shares of common stock outstanding during the period. Diluted net income per share is calculated by dividing the net income by the weighted average shares outstanding of common stock and dilutive potential common shares outstanding during the period. Dilutive potential common shares consist of dilutive shares issuable upon the exercise of outstanding stock options and the vesting of outstanding restricted stock units, computed using the treasury stock method.

 

10


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

The following table sets forth for all periods presented the computation of basic and diluted net income per share, including the reconciliation of the numerator and denominator used in the calculation:

 

     Three Months Ended      Nine Months Ended  
     September 30,      September 30,  
     2012      2011      2012      2011  

Numerator:

           

Net income

   $ 6,068       $ 6,942       $ 18,272       $ 14,960   
  

 

 

    

 

 

    

 

 

    

 

 

 

Denominator:

           

Weighted average shares outstanding, basic

     25,419         24,806         25,318         24,635   

Effect of dilutive securities:

           

Stock options and restricted stock units

     1,219         1,392         1,452         1,533   
  

 

 

    

 

 

    

 

 

    

 

 

 

Weighted average shares outstanding, diluted

     26,638         26,198         26,770         26,168   
  

 

 

    

 

 

    

 

 

    

 

 

 

Basic net income per share

   $ 0.24       $ 0.28       $ 0.72       $ 0.61   
  

 

 

    

 

 

    

 

 

    

 

 

 

Diluted net income per share

   $ 0.23       $ 0.26       $ 0.68       $ 0.57   
  

 

 

    

 

 

    

 

 

    

 

 

 

Stock options and restricted stock units outstanding in the amount of 2,106 and 1,672 shares for the three months ended September 30, 2012 and 2011, respectively, and 1,578 and 1,325 shares for the nine months ended September 30, 2012 and 2011, respectively, were excluded from the computation of diluted earnings per share because they were anti-dilutive in the period. These securities outstanding as of September 30, 2012 could dilute net income per share in the future.

Accounting for Lease Incentives

As part of the Company’s existing leased facilities, the Company has received various lease incentives which take the form of a fixed allowance towards lease improvements on the facility. The Company used the allowance to make leasehold improvements which will be depreciated over the useful life of the assets or the lease term, whichever is shorter. The lease incentives liability is being amortized over the term of the lease as an offset to rent expense.

 

2. Inventories

Inventories consisted of the following:

 

     September 30,      December 31,  
     2012      2011  

Work-in-process

   $ 12,633       $ 7,471   

Finished goods

     7,559         7,216   
  

 

 

    

 

 

 
   $ 20,192       $ 14,687   
  

 

 

    

 

 

 

 

11


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

3. Property and Equipment

Property and equipment consisted of the following:

 

     September 30,
2012
    December 31,
2011
 

Computer hardware

   $ 2,164      $ 2,056   

Computer software

     7,788        6,083   

Equipment

     13,526        10,296   

Furniture

     1,213        1,223   

Leasehold improvements

     3,800        3,546   
  

 

 

   

 

 

 
     28,491        23,204   

Less accumulated depreciation and amortization

     (17,678     (15,299
  

 

 

   

 

 

 
   $ 10,813      $ 7,905   
  

 

 

   

 

 

 

 

4. Stock Repurchase Program

Under the Company’s stock repurchase program announced on January 28, 2008 and further increased on October 20, 2008, April 24, 2009, May 20, 2010, October 22, 2010 and July 20,2012, the Company repurchased 436 shares during the three months ended September 30, 2012 for $10,234, at an average cost of $23.45 per share including commissions. The Company repurchased 504 shares for $12,228 at an average cost of $24.26 per share including commissions during the nine months ended September 30, 2012. The Company repurchased 248 shares for $4,944 at an average cost of $19.94 per share including commissions during the three and nine months ended September 30, 2011.

The Company’s policy is to consider shares to have been repurchased upon the settlement date of the transaction, which is typically three days subsequent to the trading date. Shares repurchased during the three and nine months ended September 30, 2012 have been reported as treasury stock. As of September 30, 2012, this repurchase program has $11.1 million remaining under the Company’s repurchase authorization.

 

12


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

5. Fair Value Measurements

The Company currently has only cash and cash equivalents held and used in the ordinary course of business that must be measured at fair value on a recurring basis. The Company does not have other financial or non-financial assets or liabilities that are required to be measured at fair value either on a recurring or non-recurring basis.

Based on the nature of cash and cash equivalents and the underlying securities, there are no realized or unrealized gains and losses recorded from holding these assets.

The fair value of financial assets measured at fair value on a recurring basis was determined using the following inputs:

 

     September 30, 2012  
     Fair value measurements at reporting date using  
     Total      Quoted prices in
active markets for
identical assets
(Level 1)
     Significant other
observable inputs
(Level 2)
     Significant
unobservable inputs
(Level 3)
 

Money market funds

   $ 128,559       $ 128,559       $ —         $ —     
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 128,559       $ 128,559       $ —         $ —     
  

 

 

    

 

 

    

 

 

    

 

 

 
     December 31, 2011  
     Fair value measurements at reporting date using  
     Total      Quoted prices in
active markets for
identical assets
(Level 1)
     Significant other
observable inputs
(Level 2)
     Significant
unobservable inputs
(Level 3)
 

Money market funds

   $ 108,149       $ 108,149       $ —         $ —     
  

 

 

    

 

 

    

 

 

    

 

 

 

Total

   $ 108,149       $ 108,149       $ —         $ —     
  

 

 

    

 

 

    

 

 

    

 

 

 

In addition, the Company held $3 million of Level 1 U.S. Treasuries at September 30, 2012 which are measured on a non-recurring basis as these investments are held-to-maturity.

 

13


Table of Contents

VOLTERRA SEMICONDUCTOR CORPORATION AND SUBSIDIARIES

NOTES TO CONDENSED CONSOLIDATED FINANCIAL STATEMENTS

(In thousands, except per share data)

(Unaudited)

 

6. Litigation

As initially disclosed in the Company’s Annual Report on Form 10-K for the year ended December 31, 2008, and as updated in subsequent public filings, we filed a lawsuit in November 2008 in the United States District Court in the Northern District of California against Infineon Technologies AG, Infineon Technologies North America Corporation, and Primarion, Inc., (collectively, the “Defendants”) for infringement of several of our patents, seeking damages, enhanced damages for willful infringement and injunctive relief.

A trial related to our integrated power stage patents, U.S. Patent Nos. 6,278,264 and 6,462,522 was held in May 2011. The court had determined that Volterra’s asserted claims were infringed by Defendant’s accused products, and a unanimous jury found that all asserted claims were also valid and not obvious. No trial date to determine damages or willfulness is currently set. There have been no further material developments in these litigation proceedings during the quarter ended September 30, 2012.

As initially disclosed in the Company’s Annual Report on Form 10-K for the year ended December 2009, and as updated in subsequent public filings, Infineon Technologies AG filed a lawsuit against us in Delaware for infringement of four patents assigned to Infineon, seeking damages, enhanced damages for willful infringement and injunctive relief. Such case was subsequently transferred to the United States District Court, Northern District of California. There have been no further material developments in these litigation proceedings during the quarter ended September 30, 2012.

 

14


Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion should be read in conjunction with our condensed consolidated financial statements and the related notes contained elsewhere in this quarterly report on Form 10-Q. All statements in the following discussion that are not reports of historical information or descriptions of current accounting policy are forward-looking statements. Please see the “Cautionary Note Regarding Forward-Looking Statements” at the beginning of this quarterly report and consider our forward-looking statements in light of the factors that may affect operating results set forth herein.

Overview

We design, develop, and market proprietary, high-performance analog and mixed-signal power management semiconductors. We sell integrated voltage regulator semiconductors, integrated power protection and distribution semiconductors and scalable voltage regulator semiconductor chipsets in the computing, storage, networking, and consumer markets, primarily to original equipment manufacturers, or OEMs, original design manufacturers, or ODMs, contract equipment manufacturers, or CEMs, or merchant power supply manufacturers.

Our net revenue was $153.6 million and $156.0 million in 2010 and 2011, respectively, and $127.8 million for the nine months ending September 30, 2012. We generated net income of $28.4 million and $20.6 million in 2010 and 2011, respectively, and $18.3 million in the nine months ending September 30, 2012. As of September 30, 2012, we had retained earnings of $61.5 million.

Our net revenue consists primarily of sales of our power management semiconductor products. When evaluating our net revenue, we categorize our sales into three major markets: server and storage; consumer and portable; and networking and communications. The electronics manufacturing industry is complex and disaggregated, and electronic system producers typically utilize distributors and outsourced suppliers to provide procurement, manufacturing, design, and other supply chain related services within the industry. We attempt to quantify the amount of sales within the major markets identified above, but such quantified amounts are approximations only, as we must rely upon estimates and assumptions regarding the incorporation of our products sold to distributors or other outsourced suppliers into the systems of the OEMs, ODMs, CEMs, or merchant power supply manufacturers for each particular market. In the third quarter of 2012, we estimate that 59% of our net revenue was derived from sales in the server and storage market, 35% from the consumer and portable market and 6% from the networking and communications market. We believe that the most significant portion of our revenues for the remainder of the current fiscal year will continue to be derived from sales in the server and storage market.

 

15


Table of Contents

Our sales and accounts receivable are currently concentrated with a small group of customers, and we expect this to continue in the future. In the third quarter of 2012, four customers each accounted for more than 10% of our net revenue, and collectively accounted for 70% of our net revenue. In the third quarter of 2011, four customers each accounted for over 10% of our net revenue, and collectively accounted for 73% of our net revenue. While we report revenue for direct sales to particular customers, our sales data may not accurately reflect the additional “indirect” demand from distributors and outsourced suppliers who purchase our products pursuant to their business relationships with these same customers. Because we have less visibility into and are not able to quantify this “indirect” demand, we are unable to determine how much additional revenue these customers may generate. In addition, our sales data also may not identify customers who do not directly account for 10% of our net revenue, but may be significant in that such customers also generate substantial “indirect” demand from distributors and outsourced suppliers. If any such customer were to stop incorporating our products or third party products containing our components into its designs, we would not only lose the direct revenue we receive from the customer, but we could also lose a portion of the indirect revenue from third parties who do business with such customer. If we were to lose or experience a significant reduction in demand from one or more of our key customers either to which we sell directly or which generates “indirect” demand or if we were to fail to collect our accounts receivable from one or more of our key customers, our operating results and financial position would be materially adversely impacted.

Because demand for our products is impacted by demand for our customers’ products, our revenue depends on the timing, size, and speed of commercial introductions of systems that use our products, and our customers’ ability to manage their inventories in relationship to such demand. We continue to expect a significant amount of our revenue to come from the commercial introduction of new systems, which is often more difficult to forecast than ongoing demand for previously introduced systems. A number of our customers’ applications, particularly in the consumer and portable market, are subject to short product cycles and prone to delays in development and commercial introduction or significant changes in demand, making it inherently difficult to accurately forecast demand for such applications in any period. A number of our customers, such as ODMs, CEMs, and merchant power supply manufacturers, also are dependent upon the demand of other companies, which makes sales to such parties more difficult to forecast accurately. These fluctuations in demand could materially affect our operating results on a period by period basis.

We recognize revenue on our sales upon shipment with a provision for estimated sales returns and allowances. A portion of our revenues comes from customer orders that are both received and shipped against within the same quarter, or “turns business,” which is inherently difficult to forecast. We estimate turns business as a percent of net revenue as the ratio of net revenue less beginning backlog to net revenue making adjustments for the effect of sales return reserves or other adjustments to net revenue not included in backlog. Turns business was between 10% and 20% in the third quarter of 2012, compared to between 15% and 25% in the second quarter of 2012 and between 5% and 15% in the third quarter of 2011. If our turns business increases, forecasting revenue becomes more difficult. Generally, our current sales practice allows customers to, and customers routinely do, revise and cancel orders and reschedule delivery dates on relatively short notice pursuant to changes in the customer’s requirements. In addition, in circumstances where we have achieved our objectives in a period or when we have limited or insufficient inventory available, we may delay shipment of orders. For these reasons, backlog has limited value as a predictor of future revenues.

We typically sell directly through our internal sales force to customers in North America. We sell both directly and indirectly through distributors internationally, under agreements that generally do not provide for price adjustments after purchase and provide limited return rights in the event of product failure. We have made no U.S. sales to distributors. During the third quarter of 2012, sales to international distributors represented 29% of net revenue, compared to 31% in the second quarter of 2012 and 27% in the third quarter of 2011. We expect the sales channels we use and the mix of business between distribution and direct sales to change as our product offerings and customers evolve.

 

16


Table of Contents

Our cost of revenue consists primarily of purchases of silicon wafers and related costs of assembly, test and shipment of our products, and compensation and related costs of personnel and equipment associated with production management and quality assurance. Our gross margins have historically varied significantly, and may continue to vary, based on a variety of factors, including changes in the relative mix of the products we sell, the markets and geographies where we sell, the size and nature of our customers in these markets, the levels of sales to distributors, manufacturing volumes and yields, discounts or other financial incentives to customers and inventory and overhead costs. Generally, as we introduce new products, we initially incur higher unit production costs, and as the product ramp progresses, our overall unit production costs decrease as manufacturing efficiency improves. In addition, because our power management products are highly complex and the manufacturing process for our products is technically challenging, previously undetected design defects and minor deviations in the manufacturing process can cause substantial decreases in yields or quality. Such decreases in yields or quality can impact our gross margins due to a reduction in our revenue as a result of significant product returns, may cause us to incur product replacement costs, and may cause us to rework or scrap inventory that had been manufactured with the defect. If we are unable to manage these risks, our revenue and gross margins and financial position may be materially adversely impacted. Finally, consistent with the overall market for power management solutions, we expect to face price pressure over time. In order to maintain or improve our gross margins, we will need to introduce new, lower cost products, increase volumes, reduce unit costs or achieve a combination of these objectives.

We purchase our inventory pursuant to standard purchase orders. As lead times at our manufacturing vendors can be up to three months or more, we typically build inventory based on our sales forecasts rather than customers’ orders, subjecting us to inventory risk. If, after initial orders are placed, we change certain features of our product to accommodate customer requirements, we may create additional inventory that we may not be able to sell. In the event of an inventory write-down either because the inventory exceeds demand, becomes obsolete, or contains previously undetected defects and must be reworked or scrapped, our gross margins could be materially adversely impacted. On the other hand, because our manufacturing lead times tend to be longer than our order lead times and capacity at our manufacturing vendors may be constrained, our net revenue and relationship with our customers could be adversely impacted if we do not have adequate inventory available to meet customer demand. Our inventory levels were $20.2 million at the end of the third quarter of 2012, and inventory turns, calculated as our annualized cost of revenue for the quarter divided by our inventories as of the end of such quarter, decreased to 3.5 in the third quarter of 2012 compared to 4.3 turns in second quarter of 2012 and 4.5 turns in the third quarter of 2011. If the amount of inventory we are holding increases or our inventory turns decrease, the risk of a potential inventory write-down and adverse impact on our gross margins increases.

Our research and development expense consists primarily of compensation and related costs for employees involved in the design and development of our products, prototyping and other development expense, and the depreciation costs related to equipment being used for research and development. All research and development costs are expensed as incurred. Research and development expenses can fluctuate as a result of long design cycles with periods of relatively low expenses punctuated with increased expenditures for prototypes and product development toward the end of the design cycle.

Selling, general and administrative expense consists primarily of compensation and related costs for employees involved in sales and marketing, field services general management, finance, human resources and information technology, as well as expenses related to professional services, insurance and business travel.

Litigation expenses consist primarily of attorneys’ fees and costs and expenses associated with our litigation matters described in Item 1 of Part II - Legal Proceedings, and such legal proceedings may continue or could increase for the current year and beyond. Our litigation expenses were approximately $0.8 million in the third quarter of 2012 and $2.8 million for the nine months ended September 30, 2012.

 

17


Table of Contents

Our income tax provision is dependent on our estimated annual effective tax rate. Our annual effective tax rate has fluctuated and is dependent on the mix of income and losses between domestic and international operations. Additionally, our annual effective tax rate may also be impacted by any future utilization of available net operating loss and tax credit carryforwards and changing assessments of statutory income tax rates. Our domestic deferred tax assets are fully offset by a valuation allowance because, based on the available objective evidence, we believe it is more likely than not that the net deferred tax assets will not be realized. If we later determine that it is more likely than not that the deferred tax assets would be realized, we may revise this assessment, which could result in a favorable adjustment to the reported income tax provision in the period of re-assessment followed by higher reported tax rates in subsequent periods. Our foreign income is typically subject to lower statutory rates than our domestic income. We expect that both our geographical mix of taxable income and losses as well as the statutory rates we are subject to internationally may change over time, resulting in changes to our effective tax rate and reported income tax provision.

Critical Accounting Policies

There have been no significant changes to our critical accounting policies during the nine months ended September 30, 2012 as compared to the previous disclosures in Management’s Discussion and Analysis of Financial Condition and Results of Operations included in our annual report on Form 10-K for the fiscal year ended December 31, 2011, as filed with the SEC on March 6, 2012.

Results of Operations

The following table sets forth our results of operations as a percentage of net revenue for the periods indicated:

 

     Three Months Ended     Nine Months Ended  
     September 30,     September 30,  
     2012     2011     2012     2011  

Net revenue

     100     100     100     100

Cost of revenue

     42        43        42        43   
  

 

 

   

 

 

   

 

 

   

 

 

 

Gross margin

     58        57        58        57   
  

 

 

   

 

 

   

 

 

   

 

 

 

Operating expenses:

        

Research and development

     26        23        26        24   

Selling, general and administrative

     16        15        16        17   

Litigation

     2        2        2        3   
  

 

 

   

 

 

   

 

 

   

 

 

 

Total operating expenses

     44        40        44        44   
  

 

 

   

 

 

   

 

 

   

 

 

 

Income from operations

     14        17        14        13   

Non-operating expense (income), net

     —          —          —          —     
  

 

 

   

 

 

   

 

 

   

 

 

 

Income before income taxes

     14        17        14        13   

Income tax expense (benefit)

     —          —          —          —     
  

 

 

   

 

 

   

 

 

   

 

 

 

Net income

     14     17     14     13
  

 

 

   

 

 

   

 

 

   

 

 

 

Comparison of Three Months Ended September 30, 2012 to Three Months Ended September 30, 2011

Net Revenue. Net revenue was $42.1 million in the three months ended September 30, 2012 and $41.3 million in the three months ended September 30, 2011, an increase of 2%. Revenues increased approximately $1.9 million in the server and storage market, which were partially offset by decreases of approximately $0.8 million and $0.3 million in the consumer and portable and networking and communications markets, respectively.

Cost of Revenue and Gross Margin. Cost of revenue was $17.7 million for the three months ended September 30, 2012 and $17.8 million for the three months ended September 30, 2011, a decrease of 1%. Gross margin was $24.5 million for the three months ended September 30, 2012 and $23.6 million for the

 

18


Table of Contents

three months ended September 30, 2011, an increase of 4%. Gross margin as a percentage of net revenue was 58% for the three months ended September 30, 2012 compared to 57% for the three months ended September 30, 2011. The increase in gross margin percentage as a percentage of revenue was primarily due to cost reductions.

Research and Development. Research and development expenses were $11.0 million for the three months ended September 30, 2012 and $9.6 million for the three months ended September 30, 2011, an increase of 14%. The increase is primarily due to an increase in wages and other related expenses of $0.7 million, an increase in product development expenses of $0.3 million and an increase in stock-based compensation expense of $0.3 million.

Selling, General and Administrative. Selling, general and administrative expenses were $6.5 million for the three months ended September 30, 2012 and $6.3 million for the three months ended September 30, 2011, an increase of 3%. The increase was primarily due to an increase in stock-based compensation expense of $0.2 million.

Litigation. Litigation expenses were approximately $0.8 million for the three months ended September 30, 2012 and $0.7 million for the three months ended September 30, 2011, an increase of 23%. The increase was primarily due to an increase in activity related to the litigation described in Item 1 of Part II - Legal Proceedings.

Income Tax Expense. Income tax expense was $121 thousand for the three months ended September 30, 2012 and the income tax benefit was $9 thousand for the three months ended September 2011.

Comparison of Nine Months Ended September 30, 2012 to Nine Months Ended September 30, 2011

Net Revenue. Net revenue was $127.8 million in the nine months ended September 30, 2012 and $117.2 million in the nine months ended September 30, 2011, an increase of 9%. The increase in net revenue was primarily due to increases of $8.8 million and $2.9 million in sales to the server and storage and the consumer and portable markets, respectively, partially offset by a decrease of $1.1 million in sales to the networking and communications market.

Cost of Revenue and Gross Margin. Cost of revenue was $53.9 million for the nine months ended September 30, 2012 and $50.3 million for the nine months ended September 30, 2011, an increase of 7%. Gross margin was $73.9 million for the nine months ended September 30, 2012 and $66.9 million for the nine months ended September 30, 2011, an increase of 10%. Gross margin as a percentage of net revenue was 58% for the nine months ended September 30, 2012 and 57% for the nine months ended September 30, 2011. The increase in gross margin as a percentage of revenue for the nine months ended September 30, 2012 compared to the nine months ended September 30, 2011 was primarily due to cost reductions and yield improvements.

Research and Development. Research and development expenses were $32.4 million for the nine months ended September 30, 2012 and $27.7 million for the nine months ended September 30, 2011, an increase of 17%. The increase was primarily due to the increase in wages and related expenses of $2.6 million, higher performance based bonus accruals of $0.5 million, higher product development expenses of $1.0 million and an increase in stock-based compensation expense of $0.7 million.

Selling, General and Administrative. Selling, general and administrative expenses were $20.2 million for the nine months ended September 30, 2012 and $20.0 million for the nine months ended September 30, 2011, an increase of 1%. The increase was primarily due to an increase in stock-based compensation expense of $0.7 million, partially offset by a decrease in other legal expense unrelated to our pending litigation of $0.3 million and a decrease in wages and other related expenses of $0.3 million.

Litigation. Litigation expenses were approximately $2.8 million for the nine months ended September 30, 2012 and $4.0 million for the nine months ended September 30, 2011, a decrease of 30%. The decrease was primarily due to the decrease in activity related to the litigation described in Item 1 of Part II - Legal Proceedings.

 

19


Table of Contents

Provision for Income Tax. Income tax provision was $309 thousand and $123 thousand for the nine months ended September 30, 2012 and 2011, respectively.

Liquidity and Capital Resources

As of September 30, 2012, we had working capital of $174.4 million, including cash, cash equivalents and short-term investments of $142.7 million, compared to working capital of $152.8 million, including cash and cash equivalents of $126.7 million, as of December 31, 2011. Our cash, cash equivalents and short-term investments increased by $16.0 million in the nine months ended September 30, 2012. We currently have no debt and believe that our current cash, cash equivalents, and short-term investments as well as expected cash flows from operations will be sufficient to fund our operations and meet our capital needs for the current fiscal year and the foreseeable future.

Our operating activities provided net cash of $23.0 million and $19.2 million for the nine months ended September 30, 2012 and 2011, respectively.

Cash provided from operating activities for the nine months ended September 30, 2012 was primarily due to net income of $18.3 million, adjustments for non-cash items of $9.9 million and an increase in other liabilities of $1.2 million. The primary non-cash items were stock-based compensation of $7.5 million and depreciation and amortization of $2.4 million. The above increases in cash were partially offset by increases in accounts receivable and inventories of $1.9 million and $5.5 million, respectively. The increase in accounts receivable was primarily due to an increase in net revenue and the increase in inventories was primarily due to increased production levels.

The primary sources of cash from operations for the nine months ended September 30, 2011 were due to net income of $15.0 million and adjustments for non-cash items of $8.2 million The above increases in cash were partially offset by increases in accounts receivable of $1.7 million and a decrease in accrued liabilities of $2.8 million. The increase in accounts receivable was due to the timing of collections and the decrease in accrued liabilities was primarily due to a decrease in legal accruals and a decrease in profit-dependent accruals.

Our investing activities used net cash of $6.9 million in the nine months ended September 30, 2012, and provided net cash of $4.7 million in the nine months ended September 30, 2011. The primary use of cash for the nine months ended September 30, 2012 was the purchase of short-term investments of $6.0 million and purchases of property and equipment of $4.9 million, partially offset by maturities of short-term investments of $4.0 million. The primary source of cash for the nine months ended September 30, 2011 was from the maturities of short-term investments of $24.9 million, partially offset by purchases of property and equipment and short-term investments of $3.2 million and $17.0 million, respectively.

Our financing activities used net cash of $2.1 million in the nine months ended September 30, 2012, and provided net cash of $1.0 million for the nine months ended September 30, 2011. The primary use of cash for the nine months ended September 30, 2012 were for repurchases of our common stock of $12.2 million, partially offset by proceeds from the sale of securities under the stock option and employee stock purchase plan of $10.4 million. The sources of cash for the nine months ended September 30, 2011 were from proceeds from the sale of securities under the stock option and employee stock purchase plan of $6.1 million, partially offset by repurchases of our common stock of $4.9 million.

As of September 30, 2012, the cash, cash equivalents and short-term investments held by our foreign subsidiaries was approximately $63.8 million. If these funds were repatriated to the U.S., under current tax law, we could be required to accrue and pay U.S. taxes on a portion of these funds. Our current plan is to permanently reinvest these funds outside the U.S.

 

20


Table of Contents

Contractual Obligations

The following table sets forth our contractual obligations as of September 30, 2012 (in thousands) and the periods in which such obligations are expected to be settled:

 

Fiscal Year

   Purchase
obligations
     Operating lease
obligations
 

2012

   $ 6,289       $ 433   

2013

     351         1,319   

2014

     —           1,035   

2015

     —           959   

2016

     —           960   

Thereafter

        1,082   
  

 

 

    

 

 

 

Total

   $ 6,640       $ 5,788   
  

 

 

    

 

 

 

Operating lease obligations consist of the estimated obligations under our real property or facility leases. Purchase obligations are comprised of the estimated obligation for non-cancellable in-process silicon wafers and purchase obligations under the Company’s software maintenance contracts. We depend entirely upon third-party foundries to manufacture our silicon wafers. Due to lengthy foundry lead times, we typically order these materials up to three months or more in advance of required delivery dates, and we are obligated to pay for the materials in accordance with the contractual payment terms, which typically require payment within one month of delivery.

The amounts in the table above exclude $1.6 million of non-current income tax liabilities as we are unable to reasonably estimate the timing of settlement.

Recent Accounting Pronouncements

The Company has determined that there were no recent accounting pronouncements issued during the three months ended September 30, 2012 that are expected to have a material impact on the Company’s financial position, results of operations or liquidity.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

During the nine months ended September 30, 2012, there were no material changes to the quantitative and qualitative disclosures about market risk related to our investment activities as disclosed under Part II, Item 7A of our annual report on Form 10-K for the year ended December 31, 2011, filed with the SEC on March 6, 2012.

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

As of the end of the period covered by this report, an evaluation was performed under the supervision and with the participation of our management, including our Chief Executive Officer and Chief Financial Officer (collectively, our “certifying officers”), of the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) of the Securities Exchange Act of 1934, as amended) as required by Rules 13a-15(b) or 15d-15(b) of the Securities Exchange Act of 1934, as amended. Based on their evaluation, our certifying officers concluded that these disclosure controls and procedures were effective.

We believe that a system of internal controls, no matter how well designed and operated, is based in part upon certain assumptions about the likelihood of future events, and can be affected by limitations inherent in all internal controls systems including the realities that human judgment in decision-making can be faulty, that persons responsible for establishing controls need to consider their relative costs and benefits, that breakdowns can occur because of human failures such as simple error or mistake, and that

 

21


Table of Contents

controls can be circumvented by collusion of two or more people. Accordingly, we believe that our system of internal controls, while effective, can only provide reasonable, not absolute, assurance that the objectives of the controls system are met, and no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within our company have been detected.

We have reviewed our internal controls over financial reporting and have made no changes during the quarter ended September 30, 2012, that our certifying officers concluded materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

From time to time, we may become subject to legal proceedings in the ordinary course of our business. Except as set forth below, we are not currently involved in any legal proceedings that we believe will, either individually or in the aggregate, materially and adversely affect our business.

As initially disclosed in the Company’s Annual Report on Form 10-K for the year ended December 31, 2008, and as updated in subsequent public filings, we filed a lawsuit in November 2008 in the United States District Court in the Northern District of California against Infineon Technologies AG, Infineon Technologies North America Corporation, and Primarion, Inc., (collectively, the “Defendants”) for infringement of several of our patents, seeking damages, enhanced damages for willful infringement and injunctive relief. A trial related to our integrated power stage patents, U.S. Patent Nos. 6,278,264 and 6,462,522 was held in May 2011. The court had determined that Volterra’s asserted claims were infringed by Defendant’s accused products, and a unanimous jury found that all asserted claims were also valid and not obvious. No trial date to determine damages and willfulness is currently set. There have been no further material developments in these litigation proceedings during the quarter ended September 30, 2012.

As initially disclosed in the Company’s Annual Report on Form 10-K for the year ended December 2009, and as updated in subsequent public filings, Infineon Technologies AG filed a lawsuit against us in Delaware for infringement of four patents assigned to Infineon, seeking damages, enhanced damages for willful infringement and injunctive relief. Such case was subsequently transferred to the United States District Court, Northern District of California. There have been no further material developments in these litigation proceedings during the quarter ended September 30, 2012.

The semiconductor industry is characterized by frequent claims of infringement and litigation regarding patent and intellectual property rights. Further litigation may be necessary to enforce our intellectual property rights, or we may have to defend ourselves against additional claims. Any such actions could subject us to significant expense or liability for damages, or could invalidate our proprietary rights, any of which could have a material adverse effect on our business. Such actions could consume significant financial and other resources, and although we strongly believe in the validity of our positions, there is no guarantee that any such proceedings would be successful on its merits.

Item 1A. Risk Factors

Included below is a description of risk factors related to our business to enable readers to assess, and be appropriately apprised of, many of the risks and uncertainties applicable to the forward-looking statements made in this quarterly report on Form 10-Q. The risks and uncertainties set forth below are not all of the risks and uncertainties facing our business, but we do believe that they reflect important ones. You should carefully consider the risks described below and elsewhere in this report, which could materially and adversely affect our business, results of operations or financial condition. In those cases, the trading price of our common stock could decline and you may lose all or part of your investment. Given these risks and uncertainties, you are cautioned not to place undue reliance on forward-looking statements.

The risk factors described in Part I, Item 1A of our Annual Report on Form 10-K for the year ended December 31, 2011, as filed with the SEC on March 6, 2012, are set forth below. These risk factors have not substantively changed, except for those identified by asterisk below. Risk factors marked with a “+” have been reordered from the presentation in the Annual Report.

 

22


Table of Contents

Risks Related to our Financial Performance

Our financial performance in the past has fluctuated and may continue to do so in the future.*

We have been profitable on an annual basis since 2004, following annual net losses from 1996 through 2003. While we have historically experienced year over year revenue growth, the rate of revenue growth has fluctuated significantly over such years and on a period to period basis. Between 2010 and 2011, our annual net revenue increased 2% from $153.6 million to $156.0 million. During the last four fiscal quarters, our revenue decreased 6%, increased 8%, increased 4%, and decreased 3% during such quarterly periods. We expect our quarterly and annual revenue to continue to fluctuate. Accordingly, you should not rely on the results of any prior quarterly or annual periods as an indication of our future revenue growth or financial results.

We may also not be able to maintain profitability on a quarterly or annual basis. Our ability to maintain profitability on a quarterly or annual basis depends in part on the rate of growth of our target markets, the continued acceptance of our and our customers’ products, the competitive position of our products, our ability to develop new products, our ability to secure adequate manufacturing capacity and our ability to manage expenses. Because many of our expenses are fixed in the short term or incurred in advance of anticipated revenue, we may not be able to decrease our expenses in a timely manner or we may elect to not reduce expenses, to offset any shortfall in revenue.

Our operating results have fluctuated in the past, and we expect a number of factors to cause our operating results to fluctuate in the future, making it difficult for us to accurately forecast our operating results.*

In the past, our net revenue and operating results have fluctuated from quarter to quarter and year to year, and we expect them to continue to do so in the future. A number of factors, many of which are beyond our control, are likely to cause our net revenue and operating results to fluctuate. These factors include, but are not limited to:

 

   

varying order patterns in the markets in which we sell our products;

 

   

the loss of one or more key customers, or a significant reduction in sales to, or significant product returns by, one or more key customers;

 

   

our ability to develop new products or new generations and versions of our existing products that achieve market acceptance in a timely manner;

 

   

our ability to develop products that comply with new technologies and system requirements;

 

   

demand for our products or the electronic systems into which our products are incorporated and our ability to accurately forecast such demand;

 

   

our management of our own inventory levels to meet changes in demand;

 

   

changes in orders both received and shipped during the same quarter (our “turns business”);

 

   

the volatile nature of the semiconductor industry;

 

   

changes in the condition of the world economy;

 

   

the loss of one or more key distributors, or a significant reduction in orders from one or more key distributors, which we are unable to replace;

 

   

our customers’ failure to pay us on a timely basis, or at all;

 

   

the timing of introductions of competing products or technologies;

 

   

litigation involving us or our products;

 

   

disputes regarding intellectual property rights;

 

   

changes in the prices of our products or the electronic systems into which our products are incorporated;

 

   

our ability to obtain sufficient capacity from foundries and other third-party subcontractors to manufacture, assemble and test our products on a timely and cost-effective basis;

 

   

the ability of our foundries and third-party subcontractors to achieve satisfactory yields or quality;

 

23


Table of Contents
   

the ability of our manufacturing subcontractors to manufacture our products on a timely and cost effective basis;

 

   

our ability to fulfill orders for our products in a timely manner, or at all; and

 

   

our ability to adequately support our future growth.

Due to these and other factors discussed in this report, you should not rely upon the results of any prior quarter or year as an indication of our future operating performance.

Our stock price will fluctuate and may be volatile, which could result in substantial losses for investors and significant costs related to litigation.*

The market price of our common stock may fluctuate significantly in response to a number of factors, some of which are beyond our control, which could result in substantial losses for investors. These factors include, but are not limited to:

 

   

actual or anticipated fluctuations in our revenue, operating results or growth rate;

 

   

failure to meet the expectations of securities analysts or investors with respect to our financial performance;

 

   

actual or anticipated fluctuations in our competitors’ operating results or changes in their growth rates;

 

   

sales of our common stock or other securities in the future;

 

   

stock market price and trading volume fluctuations of publicly-traded companies in general and semiconductor companies in particular;

 

   

the trading volume of our common stock;

 

   

changes in financial estimates and ratings by securities analysts for us, our customers or competitors or companies in the semiconductor industry generally;

 

   

changes in the condition of the financial markets, the economy as a whole, the semiconductor industry, our customers or our competitors;

 

   

publicity about the semiconductor industry, our competitors or our customers; and

 

   

changes in key personnel.

For example, as disclosed in Part II – Market Information and Stockholders of our Annual Report on Form 10-K for the year ended December 31, 2011, the high and low of our stock price fluctuated significantly within each period. Between the start of 2012 through the end of the third quarter, our closing stock price has traded in a broad range from $21.09 to $34.42. The stock market in general, and the Nasdaq Global Select Market in particular, has experienced extreme price and volume fluctuations in recent years that have often been unrelated or disproportionate to the operating performance of the listed companies. Broad market and industry factors may materially harm the market price of our common stock, regardless of our operating performance.

In the past, securities class action litigation has often been brought against companies following periods of volatility and decline in the market price of their securities. If our stock price is volatile or declines, we may be the target of similar litigation in the future. Securities litigation could result in significant costs and divert management’s attention and resources, which could seriously harm our business and operating results.

Risks Related to our Markets and Customers

We target our sales and marketing efforts in particular markets, and in these markets we have experienced varying order patterns. If demand for our products in these markets declines, or if we are unable to adjust to the varying order patterns in these markets or to expand into new markets, our business would be harmed.*

We target our sales and marketing efforts in particular markets, where our proprietary technology provides us with certain advantages over competitive voltage regulator solutions. Within each market, we sell products for systems that are developed for chipset specifications, standards or architectures that support

 

24


Table of Contents

specific current and power levels. In 2011, 93% of our net revenue was derived from the sale of our products in the server and storage and the consumer and portable markets. We are also looking to expand our presence in our networking and communications market, and will also look to develop our business in the energy market. Technological requirements such as power levels and architecture in any particular market may change in a way that increases or decreases the advantages and benefits that our products can provide. If the demand for our products in these markets declines, or if demand for products in the other markets we are targeting does not develop, we may need to further diversify and expand our product portfolio or our target markets. If we are unable to do so in a timely and cost-effective manner, our business and operating results could be harmed.

If we are unable to timely develop new products or new generations and versions of our existing products that achieve market acceptance, or comply with prevailing technological standards, our operating results and competitive position could be harmed.*+

Our industry is characterized by intense competition, rapidly evolving technology, and continually changing customer requirements. We develop products that are better suited for particular technological specifications or customer requirements, which allow us to provide a meaningful advantage over competitive voltage regulator solutions. In particular, we compete most favorably in systems that deal with higher current levels and require greater voltage regulator efficiency and therefore require more sophisticated power management solutions. Accordingly, our ability to compete in the future will depend on our ability to successfully adapt to new technologies and requirements, and to continue to develop and market new products that achieve market acceptance on a timely and cost-effective basis. For example, a significant number of our products are developed to operate in computing systems that are based on Intel CPU specifications, architectures and power requirements, which Intel may periodically modify or change, or may develop new specifications or architectures. Some of the factors affecting our ability to compete successfully include, but are not limited to:

 

   

our ability to timely and effectively identify and address new technologies, power architectures, power requirements, specifications, industry standards or consumer preferences;

 

   

our ability to allocate our resources to markets that best suit our products and technology;

 

   

timely development of new designs;

 

   

timely qualification and certification of our products for use in electronic systems;

 

   

commercial acceptance and production of the electronic systems into which our products are incorporated;

 

   

availability, quality, price, performance, and size of our products relative to competing products and technologies;

 

   

our customer service and support capabilities and responsiveness;

 

   

our ability to effectively recruit, motivate and retain skilled engineering and research and development staff;

 

   

successful development of relationships with existing and potential new customers; and

 

   

successful development of relationships with key developers of advanced digital semiconductors.

Products we have recently developed or which we are currently developing may not achieve market acceptance, particularly if specifications, architectures or power requirements are modified or changed in a manner that reduces our advantage over competitive solutions. Many of these new products and processes require significant expenditures of company resources, and there is no guarantee that these expenditures will contribute to the development of commercially successful products. If these products fail to achieve market acceptance, or if we fail to timely develop new products that achieve market acceptance, our business, operating results, and competitive position could be adversely affected.

We sell a limited number of products and a reduction in demand for these products would harm our business and operating results.

We derive substantially all of our net revenue from the sale of integrated voltage regulator semiconductors, integrated power protection and distribution semiconductors and scalable voltage regulator semiconductor chipsets, and we expect to continue to derive substantially all of our net revenue from these

 

25


Table of Contents

products for the remainder of the current fiscal year. Factors that could cause the demand for our products to decline include downturns in the semiconductor industry or general economic conditions, changes in technological or customer requirements that reduce our competitive advantage, introduction of competing products, our pricing strategies and the pricing strategies of our competitors, or a decline in demand for the electronic systems into which our products are incorporated.

We depend on a small number of customers for substantially all of our net revenue and the loss of, or a significant reduction in orders from, any of them could significantly reduce our net revenue and adversely affect our operating results.* +

We sell our products primarily to original equipment manufacturers, or OEMs, original design manufacturers, or ODMs, contract equipment manufacturers, or CEMs, and merchant power supply manufacturers, either directly through our internal sales force or indirectly through distributors and outsourced suppliers. Certain of these customers in turn sell more broadly to multiple companies that directly address consumer demand. The markets in which we sell products are prone to significant and unpredictable changes in demand, and our product sales are directly affected by the ability of our concentrated customer base to sell their products or electronic systems that incorporate our products. If these electronic systems are not commercially successful or if the development or commercial introduction of such electronic systems is delayed or fails to occur as planned or forecasted, or if our customers do not consistently manage their inventory of products we sell to them, our operating results will be adversely affected. We expect a significant amount of our revenue to continue to come from the commercial introduction of new systems making our revenue more difficult to forecast.

In the third quarter of 2012, four customers each accounted for more than 10% of our net revenue, and collectively accounted for at least 70% of our net revenue. In the third quarter of 2011, four customers each accounted for more than 10% of our net revenue, and collectively accounted for at least 73% of our net revenue. While we report revenue for direct sales to particular customers, our sales data may not accurately reflect the additional “indirect” demand from distributors and outsourced suppliers who purchase our products pursuant to their business relationships with such significant customers. Because we have less visibility into and are not able to quantify this “indirect” demand, we are unable to determine how much additional revenue these significant customers may affect. In addition, our sales data also may not identify customers who do not directly account for 10% of our net revenue, but may be significant in that such customers also generate significant “indirect” demand from distributors and outsourced suppliers. If any such significant customer were to stop incorporating our products or third party products containing our components into its designs, we would not only lose the direct revenue we receive from the significant customer, but we could also lose a portion of the revenue from third parties who do business with such significant customer. We expect demand from a small number of customers to continue to account for a substantial portion of our net revenue for the current fiscal year. In addition, our accounts receivable tend to be concentrated with a small group of customers and we expect this to continue. Consolidation among our customers may increase our customer concentration. The loss of any of our major customers could materially adversely impact our operating results and financial position.

Because we often manufacture products in advance of receiving purchase orders, or if existing purchase orders are changed or cancelled, we are subject to inventory risks and manufacturing costs that could negatively impact our operating results.*

To ensure availability of our products for our customers, we typically start the manufacturing of our products based on forecasts provided by these customers in advance of receiving purchase orders. However, these forecasts do not represent binding purchase commitments, and we do not recognize revenue from these products until they are shipped to the customer. In addition, because we sell our products to distributors and outsourced suppliers and not always directly to electronic system producers, we may have more limited visibility into ultimate product demand, which makes forecasting more difficult for us. We incur inventory and manufacturing costs in advance of anticipated revenue. Demand for our products may not materialize and if we overestimate customer demand for our products, manufacturing based on forecasts subjects us to risks of high inventory carrying costs and obsolescence and may increase our costs. Similarly, if we underestimate demand, we may not have sufficient product inventories and may lose market share and damage customer relationships, which also could harm our business.

 

26


Table of Contents

In addition, our current sales practice generally allows customers to, and customers routinely do, revise and cancel orders and reschedule delivery dates on relatively short notice pursuant to changes in the customer’s requirements. If, after initial orders are placed, we change certain features of our product to accommodate customer requirements, we may create additional inventories that we may not be able to sell. If purchase orders are changed or cancelled, or if shipments are delayed, we may end up with excess inventories that we cannot sell, which could result in the loss of anticipated revenue and an increase in our costs due to excess inventory charges which could materially impact our financial results.

Our inventory levels were $20.2 million at the end of the third quarter of 2012, and inventory turns, calculated as our annualized cost of revenue for the quarter divided by our inventories as of the end of such quarter, decreased to 3.5 turns in the third quarter of 2012 compared to 4.3 turns in the second quarter of 2012 and 4.5 turns in the third quarter of 2011. If the amount of inventories we are holding increases or our inventory turns decrease, the risk of a potential inventory write-down and adverse impact on our financial results increases.

We rely on a small number of distributors to market and distribute our products, and if we fail to manage these relationships, our net revenue may decline.* +

Many purchases of our products are made through a concentrated group of distributors, which group may change over time. Our sales to distributors accounted for 29% of our net revenue in the third quarter of 2012 compared to 27% in the third quarter of 2011. None of our distributors are required to purchase a specified minimum level of products from us. Currently, our sales to distributors are made pursuant to standard purchase orders rather than long-term contracts and although we do not grant them a right of return pursuant to these purchase orders, their orders may be cancelled or changed more readily than if we had long-term purchase commitments. In the event of a cancellation, reduction or delay of an order, we may not have enough time to reduce operating expenses to minimize the effect of the lost revenue on our business. We also rely on our distributors to provide certain support services and other customer service to our customers. If they fail to provide appropriate levels of support and service to our customers on a timely basis, our relationships with our customers will suffer.

We need to maintain our relationships with our distributors while expanding additional channels for the marketing and sale of our products. If we fail to manage these relationships, our distributors may decide not to include our products among those that they sell or they may not make marketing and selling our products a priority. In addition, our distributors may sell product lines that are competitive with ours. If we fail to successfully manage our relationships with distributors while we look for additional channels for marketing and selling our products, our business would be harmed.

We are subject to the highly cyclical nature of the semiconductor industry and any future downturns could significantly harm our business. +

Our business is heavily influenced by the cyclical nature of the semiconductor industry. The semiconductor industry has experienced significant downturns, often in connection with, or in anticipation of, maturing product cycles of both semiconductor companies and their customers and declines in general economic conditions. These downturns have been characterized by production overcapacity, high inventory levels, and accelerated erosion of average selling prices. Any future downturns could significantly harm our business or reduce our revenue from one period to the next or for a prolonged period of time. From time to time, the semiconductor industry also has experienced periods of increased demand and production capacity constraints. We may experience substantial changes in future operating results due to factors that affect the semiconductor industry generally.

 

27


Table of Contents

We are exposed to credit risk and payment delinquencies on our accounts receivable.

None of our outstanding accounts receivables are covered by collateral or credit insurance. In addition, our standard terms and conditions permit payment within a specified number of days following shipment of product. While we have procedures to monitor and limit exposure to credit risk on our receivables, there can be no assurance such procedures will effectively limit our credit risk and avoid losses. As economic conditions change, certain of our customers may face liquidity issues and may be unable or unwilling to satisfy their payment obligations, which could have a material adverse effect on our financial condition and operating results.

Our customers may be impacted by natural disasters throughout the world, which may have an adverse impact on our business. +

In 2011, parts of Japan and Thailand were hit with natural disasters that caused significant damage to the regions, the infrastructure and their economies. These types of natural disasters can affect us and our customers, as our ability to manufacture products for, or ship products to, these customers could be impacted. Similarly, the customers’ own supply chains, operations or facilities in such areas could be impacted, which could affect order patterns or activity. Both of these potential outcomes could affect our financial condition and operating results.

Risks Related to Competition, Intellectual Property, Litigation and Regulation

We face significant competition and many of our competitors have greater resources than we have, and thus we may be unsuccessful in competing against current and future competitors.

The markets for semiconductors generally, and power management semiconductors in particular, are intensely competitive, and we expect competition to increase and intensify in the future as new or larger semiconductor manufacturers enter our market. Increased competition may result in price pressure, reduced profitability, and loss of market share, any of which could seriously harm our business, revenue, and operating results. Our ability to compete effectively and to expand our business will depend on a number of factors, including, but not limited to:

 

   

our ability to continue to recruit and retain engineering talent;

 

   

our ability to introduce new products in a timely manner;

 

   

the pricing of components used in competing solutions;

 

   

the pace at which our customers incorporate our products into their systems;

 

   

the availability of foundry, assembly, and test capacity for our products;

 

   

protection of our products by effective utilization of intellectual property laws; and

 

   

general economic conditions.

We consider our primary competitors to include Infineon Technologies, International Rectifier, Intersil, Linear Technology, Maxim Integrated Products, and Texas Instruments. In addition, we compete with a number of other companies, some of which may become significant competitors. We may also face competition from new and emerging companies that may enter our existing or future markets. Many of our competitors and potential competitors have longer operating histories, greater name recognition, complementary product offerings, a larger customer base, longer relationships with customers and distributors, and significantly greater financial, sales, marketing, manufacturing, distribution, technical, and other resources than we do. As a result, they may be able to respond more quickly to customer requirements, to devote greater resources to the development, promotion, and sales of their products and to influence industry acceptance of their products better than we can. These competitors may also be able to adapt more quickly to new or emerging technologies or standards and may be able to deliver products with performance comparable or superior to that of our products at a lower cost.

In addition, in the event of a manufacturing capacity shortage, these competitors may have or be able to obtain silicon wafer fabrication capacity when we are unable to obtain such capacity. We expect our competitors to continue to introduce new or enhanced products technologies with greater performance and improved pricing, which could cause our products to become obsolete or uncompetitive and harm our operating results.

 

28


Table of Contents

Our ability to compete will be harmed if we are unable to adequately protect our intellectual property.*

We rely primarily on a combination of patent, trademark, trade secret, and copyright law and contractual restrictions to protect our intellectual property. These afford only limited protection. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to obtain, copy, or use information that we regard as proprietary, such as product design and manufacturing process expertise. We are currently involved in a patent infringement lawsuit in the United States District Court in the Northern District of California against Infineon Technologies AG, Infineon Technologies North America Corporation and Primarion, Inc., (collectively, the “Defendants”) for infringement of several of our patents, to which Defendants have filed affirmative defenses and counterclaims, including claims for declaratory relief for inequitable conduct before the U.S. patent office and for Sherman Act violations. We are also involved in a patent infringement lawsuit in the United States District Court for the Northern District of California against Infineon Technologies AG in which we are accused of infringing four patents assigned to Infineon. These actions, and other potentially similar actions, consume significant financial and other resources. In the three months ended September 30, 2012, our litigation related expenses were approximately $0.8 million and in 2011 were approximately $4.7 million. While we believe in the strength of our positions, we are unable to assess the ultimate outcome or possible losses relating to these cases, and there is no guarantee that any such proceedings would be successful on its merits or that we will receive monetary damages awards or recoup our legal expenses. Because of the nature and inherent uncertainties of litigation, should the outcome of these actions be unfavorable, our business, financial condition, results of operations or cash flows could be materially adversely affected.

As of September 30, 2012, we had 89 issued patents and 69 patent applications pending in the United States, and three foreign patent issued and 51 foreign patent applications pending. These patents have expiration dates ranging from December 2017 to January 2031. Our pending patent applications and any future applications may not result in issued patents or may not be sufficiently broad to protect our proprietary technologies. Moreover, policing any unauthorized use of our products is difficult and costly, and we cannot be certain that the measures we have implemented will prevent misappropriation or unauthorized use of our technologies, particularly in foreign jurisdictions where the laws may not protect our proprietary rights as fully as the laws of the United States. The enforcement of patents by others may harm our ability to conduct our business. Others may independently develop substantially equivalent intellectual property or otherwise gain access to our trade secrets or intellectual property. Furthermore, changes in either the intellectual property laws or in interpretations of intellectual property laws in the United States and other countries may diminish the value of our intellectual property. For instance, the U.S. recently enacted changes to the U.S. patent system under the Leahy-Smith America Invents Act (“AIA”), including changes that would transition the U.S. from a “first-to-invent” system to a “first to file” system and alter the processes for challenging issued patents. These changes could increase the uncertainties and costs surrounding the prosecution of our patent applications and the enforcement or defense of our issued patents. The enforcement of patents by others may harm our ability to conduct our business. If we fail to effectively protect our intellectual property, our business could be harmed.

Assertions by third parties of infringement by us or our vendors of their intellectual property rights could result in significant costs and cause our operating results to suffer.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. In the future we may receive communications from various industry participants alleging infringement of patents, trade secrets or other intellectual property rights. Any lawsuits resulting from such allegations could subject us to significant liability for damages and invalidate our proprietary rights. These lawsuits, regardless of their success, would likely be time-consuming and expensive to resolve and would divert management’s time and attention. Any potential intellectual property litigation also could force us to take steps that may be harmful to our business, including, but not limited to:

 

   

stop selling products or using technology that contain the allegedly infringing intellectual property;

 

   

pay damages to the party claiming infringement;

 

29


Table of Contents
   

attempt to obtain a license to the relevant intellectual property, which may not be available on reasonable terms or at all; and

 

   

attempt to redesign those products that contain the allegedly infringing intellectual property.

In addition, the third-party foundries or subcontractors that manufacture our products may also face litigation for claims of intellectual property. Although not directly creating liabilities for us, such litigation may cause such third parties to cease providing services to us, or may cause us to incur increased costs, either of which may harm our business. We may also initiate claims or litigation against third parties for infringement of our proprietary rights or to establish the validity of our proprietary rights. In some cases, we may have an existing direct or indirect relationship with these third parties, such as customers, vendors, partners or companies within the industry that generally affect our business. Such claims or litigation could not only affect our intellectual property or proprietary rights, but may also affect and disrupt our business relationship with such third parties, impairing our ability to conduct our business and adversely affecting our financial and operational results.

Any potential dispute involving our patents or other intellectual property could also include our customers, which could trigger our indemnification obligations to them and result in substantial expense to us.*

In any potential dispute involving our patents or other intellectual property, our customers could also become the target of litigation in connection with their sales of products that incorporate our products and technology. Because we generally indemnify our customers against claims made against them based on allegations that our products infringe intellectual property rights, such litigation could result in substantial expense for us. In addition to the time and expense required for us to indemnify our customers, any such litigation could hurt our relations with our customers and cause our operating results to be harmed.

The average selling prices of our products could decrease rapidly, which may negatively impact our net revenue and operating results.

The average selling prices for power management solutions have historically declined over time. Factors that we expect to cause downward pressure on the average selling price for our products include competitive pricing pressures, the cost sensitivity of our customers, particularly in the higher-volume markets, new product introductions by us or our competitors, and other factors. To maintain acceptable operating results, we will need to offset any reduction in the average selling prices of our products by developing and introducing new products and developing new generations and versions of existing products on a timely basis, increasing sales volume, and reducing costs. If the average selling prices for our products decline and we are unable to offset those reductions, our operating results will suffer.

Environmental laws and regulations could cause a disruption in our business and operations.*

We are subject to various state, federal and international laws and regulations governing the environment, including those restricting the presence of certain substances in electronic products and making manufacturers of those products financially responsible for the collection, treatment, recycling and disposal of certain products. Such laws and regulations have been passed in several jurisdictions in which we operate, including various European Union member countries. In addition, certain provisions of the Dodd-Frank Wall Street Reform and Consumer Protection Act may soon require us to report on any “conflict materials” that may be used in our products and the due diligence plan we put in place to track whether such minerals originate from the Democratic Republic of Congo and adjoining countries. The implementation of these requirements could affect the sourcing and availability of minerals used in certain of our products. We will need to ensure that we comply with such laws and regulations as they are enacted, and that our third-party semiconductor assembly subcontractors such as Advanced Semiconductor Engineering, Amkor Technology, Carsem, JCAP, SilTech, STATS ChipPAC Ltd. and UTAC, timely

 

30


Table of Contents

comply with such laws and regulations. Because we work with subcontractors to make specified modifications to their standard processes, transitioning the manufacturing of our products can require substantial lead time. Any future delay resulting from such transition could negatively affect product performance, delivery, and yields or increase manufacturing costs. If we, or the subcontractors that we use, fail to timely comply with such laws, our customers may refuse to purchase our products. Such refusal or delay could have a materially adverse effect on our business, financial condition and results of operations.

Risks Related to our Manufacturing and Development Activities

Our dependence on third-party semiconductor manufacturers, or foundries, reduces our control over the manufacture of our products and increases our exposure to third party solvency risks, which could harm our business.

We are a fabless semiconductor company and, as such, we rely on third-party semiconductor manufacturers, or foundries, such as GlobalFoundries and Taiwan Semiconductor Manufacturing Corporation (TSMC). The ability of these foundries to provide silicon wafers to us is limited by their available capacity. Moreover, the price of our silicon wafers has in the past fluctuated and is expected to continue to fluctuate, based on changes in available industry capacity. We do not have long-term supply contracts with any of our foundries. Therefore, our manufacturers could choose to prioritize capacity for other customers, particularly larger customers, reduce or eliminate deliveries to us on short notice or increase the prices they charge us. There are significant risks associated with our reliance on these third-party manufacturers, including, but not limited to:

 

   

inability to increase production and achieve acceptable yields on a timely basis;

 

   

reduced control over delivery schedules and product quality;

 

   

inability of our foundries to obtain an adequate supply of the raw materials used in the manufacturing of our products on a timely and cost-effective basis;

 

   

increased exposure to potential misappropriation of our intellectual property;

 

   

limited warranties on silicon wafers or products supplied to us;

 

   

labor shortages or labor strikes;

 

   

natural disasters affecting countries in which we conduct our business or in which our products are manufactured; and

 

   

political instability in countries where our products are manufactured.

In addition, these third party manufacturers may elect or may be forced to shut down particular facilities for reasons beyond our control, which may require us to transition the manufacturing of our products to other facilities of such third party manufacturer or to other third party manufacturers. Because we work with foundries to make specified modifications to their standard process technologies, transitioning the manufacturing of our products to other foundries or other facilities of an existing foundry can require process design changes and may require substantial lead time. Any such delay resulting from such transition could negatively affect product performance, delivery, and yields or increase manufacturing costs. If we are not able to obtain foundry capacity as required, our relationships with our customers would be harmed and our net revenue would likely decline. Deterioration of worldwide economic conditions and financial markets and tightening in credit markets may adversely impact the financial position of our third party manufacturers. If our third party manufacturers are unable to obtain the necessary capital to operate their business, this may also impact their ability to provide us with the foundry capacity we need, or may adversely affect their ability to provide timely services or to make timely deliveries of products to us. Any such result could adversely affect our operations and financial condition.

We rely on third-party subcontractors to assemble and test our products and our failure to successfully manage our relationships with these subcontractors could damage our relationships with our customers, decrease our net revenue, and limit our growth.

 

31


Table of Contents

We rely on third-party subcontractors, such as Advanced Semiconductor Engineering, Amkor Technology, Carsem, JCAP, SilTech, STATS ChipPAC Ltd. and UTAC, to assemble and test our products. None of these third-party vendors are obligated to perform services or supply products to us for any specific period, or in any specific quantities, except as may be provided in a particular purchase order. Moreover, none of our assembly and test subcontractors has provided contractual assurances to us that adequate capacity will be available to us to meet future demand for our products. We are subject to many of the same risks with these vendors as with our foundries, including risks related to the ability of such vendors to continue to provide us with the agreed-upon services or products as needed, and our ability to control delivery schedules and product quality. If we do not successfully manage these relationships, the quality of products shipped to our customers may decline, which could damage our relationships with customers, decrease our net revenue, and negatively impact our growth.

Our products are highly complex and may require modifications to resolve previously undetected design or process errors or defects and to meet our customers’ specifications, which could lead to an increase in our costs, a loss of revenue and customers, a delay in market acceptance of our products, or product liability claims.

Our power management products are highly complex and may contain previously undetected errors or defects in design that are discovered in the manufacturing or assembly process that may significantly affect yields or quality. If we deliver products with undiscovered errors or defects, these products may be the subject of a warranty claim and we may suffer a reduction in or deferral of our revenue as a result of significant product returns and our operating results and financial position could be materially impacted. We may incur product replacement costs, and we may have to rework or scrap inventory that is returned. In addition, we may incur additional manufacturing and/or development costs to fix the defect or error and may have to rework or scrap inventory that had been built with the error or defect resulting in additional costs. If we are unable to fully recover or be reimbursed for all or a portion of these costs, our financial position and operating results may be adversely impacted. Also as a result of shipping products with defects or errors, our credibility and the market acceptance of our products could be harmed. Defects could also lead to liability for defective products as a result of lawsuits against our customers or us. We have agreed to indemnify our customers in some circumstances against liability from defects in our products. In the future, as we increase the amount of business with any given customer, we may be expected to agree upon additional terms and conditions of sale regarding product quality or product defects which may increase our costs, obligations and liabilities in connection with our product sales. Although we maintain insurance coverage consistent with customary industry practice to defray potential costs from lawsuits, including lawsuits arising from product liability, if liabilities arise that are not effectively limited or covered by such insurance, a successful product liability claim could require us to pay a significant amount of damages, which could have a material adverse impact on our financial results and financial position.

Our products comprise only part of the complex electronic systems in which they are used. As a result, our products must operate according to specifications with the other components in the electronic system. If other components of the electronic system fail to operate properly with our products, we may be required to incur additional development time and costs to enable interoperability of our products with these other components and may not be able to sell our existing inventories resulting in additional cost of revenue and materially adversely affecting our financial results.

Any disruption to our operations or the operations of our foundries or assembly and test subcontractors resulting from earthquakes, tsunamis, droughts, or other natural disasters, public health issues or other catastrophic events beyond our control could significantly delay the production or shipment of our products.

Our principal offices are located in California and we rely on foundries and assembly and test subcontractors in China, Malaysia, Philippines, Singapore, Taiwan and Thailand. The risk of natural disasters in these Pacific Rim locations is significant. The occurrence of an earthquake, tsunami, drought, floods, fires or other natural disaster near our principal offices or our subcontractors’ locations could result in damage, power outages, and other disruptions that impair our design, manufacturing, and assembly capacity and otherwise interfere with our ability to conduct our business. Any disruption resulting from such events could cause significant delays in the shipment of our products until we were able to shift our fabrication, assembling, testing or other operations from the affected subcontractor to another third-party vendor.

 

32


Table of Contents

Because we rely on third party foundries and assembly and test subcontractors, we have experienced, and may in the future experience, delays in the manufacture, development and introduction of our new products, which may harm our business and operating results.

The development of our products is highly complex, costly and inherently risky. Because we rely on third party foundries and assembly and test subcontractors, we have experienced, and may in the future experience, delays in the manufacture, development and introduction of new products or new generations and versions of our existing products. If we are unable to manufacture, develop or introduce products on a timely basis, we may lose new or existing market and customer opportunities and our financial results or competitive position could be harmed. We cannot assure you that the procedures that we have implemented to minimize delays will be effective or that delays may not occur in the future. In particular, we expect to continue to bring new products to production in new manufacturing and assembly processes. Any future delays in the introduction of new products or new generations or versions of our existing products could materially harm our business and operating results.

The nature of the design process requires us to incur expenses prior to earning revenue associated with those expenses, and we will have difficulty selling our products and generating profits if electronic system producers do not design our products into their electronic systems.

We devote significant time and resources in working with electronic system producers to get our products designed into their systems. If the system producer chooses a competitor’s product for its electronic system, it becomes significantly more difficult for us to sell our products for use in that electronic system because changing suppliers involves significant cost, time, effort, and risk for electronic system producers. If electronic system producers do not design our products into their systems, our business would be materially adversely affected.

We often incur significant expenditures in the development of a new product without any assurance that electronic system producers will select our product for use in their electronic systems. If we incur such expenditures and fail to be selected, or if we are selected and subsequently excluded from such designs, our operating results will be adversely affected. Furthermore, even if electronic system producers use our products in their electronic systems, we cannot be assured that these systems will be commercially successful or that we will receive any associated revenue.

Even if our products are selected for design into a particular electronic system, a substantial period of time will elapse before we generate revenue related to the significant expenses we have incurred. The reasons for this delay generally include, but are not limited to, the following:

 

   

it can typically take up to 12 months from the time our products are selected to complete the design process, and in some cases such design process may take substantially more time to complete;

 

   

it can typically take an additional six to 12 months to complete commercial introduction of the electronic systems that use our products, and in some cases such introduction may take substantially more time to complete, if they are introduced at all;

 

   

our customers usually require a comprehensive technical evaluation of our products before they incorporate them into their electronic systems, which may also result in our products being excluded from the system design for reasons other than our design specifications;

 

   

OEMs typically limit the initial release of their electronic systems to evaluate performance and consumer demand; and

 

   

the development and commercial introduction of products incorporating new technology are frequently delayed.

 

33


Table of Contents

As a result, we may be unable to accurately forecast the volume and timing of our orders and revenue. In addition, incurring research and development expenses prior to generating revenue may cause our operating results to fluctuate significantly from period to period.

Risks Related to our International Activities

We have significant international activities and customers, and plan to continue such efforts, which subjects us to additional business risks including increased logistical complexity, additional regulatory restrictions and political instability.*

A number of our customers are multinational corporations, with operations located throughout the world. In the third quarter of 2012, 99% of our net revenue was attributable to customers, or customers’ operations, located outside of the United States, primarily in China and Singapore, and we anticipate that a significant portion of our future revenue will continue to be generated by sales to these customers or to the customers’ operations in China and Singapore. We have engineering, sales, and operations personnel in, China, Japan, Singapore, Taiwan and the United Kingdom. Our foundries, assembly and test subcontractors, and distributors are also primarily located in Asia. Our international operations and sales are subject to a number of risks, including, but not limited to:

 

   

cultural and language barriers;

 

   

increased complexity and costs of managing international operations;

 

   

protectionist laws and business practices that favor local competition in some countries;

 

   

multiple, conflicting and changing laws and regulatory and tax environments;

 

   

potentially longer and more difficult collection periods;

 

   

political instability, international terrorism, and anti-American sentiment, particularly in emerging markets;

 

   

highly volatile economies in Asia;

 

   

difficulty in hiring qualified management, technical sales personnel, and applications engineers; and

 

   

less effective protection of intellectual property than is afforded to us in the United States.

Our inability to overcome these risks could adversely affect our foreign operations, and some of our customers and suppliers, and could harm our business and operating results.

We could be adversely affected by violations of the United States’ Foreign Corrupt Practices Act and similar worldwide anti-bribery laws.

The United States’ Foreign Corrupt Practices Act (“FCPA”) and similar anti-bribery laws in other jurisdictions generally prohibit companies, their subsidiaries and their intermediaries from making improper payments to government officials for the purpose of obtaining or retaining business. While our policies mandate compliance with the FCPA and these anti-bribery laws, there can be no assurance that our internal controls and procedures will protect us from improper acts committed by our employees or agents. If we are found to be liable for FCPA violations, we could suffer from criminal or civil penalties or other sanctions, which could have a material adverse effect on our business.

We do not hedge fluctuations in currency exchange rates, which could harm our financial results.*

Substantially all sales to international customers and purchases of production materials and manufacturing services from international suppliers in 2011 and during the nine months ended September 30, 2012 were denominated in U.S. dollars. However, fluctuations in currency exchange rates could have an effect on our results of operations and financial condition. An increase in the value of the U.S. dollar relative to foreign currencies could make our products more expensive for our international customers to purchase, thus rendering the prices of our products less competitive. If the value of the U.S. dollar decreases relative to foreign currencies, this could result in an increase in the effective costs of working with our international vendors or suppliers, and our ability to control our cost structure and maintain our financial results could be harmed.

 

34


Table of Contents

Risks Related to our Growth and Organization

We may undertake acquisitions to expand our business that may pose risks to our business and dilute the ownership of our existing stockholders.

We will evaluate opportunities to acquire other businesses, products or technologies that would complement our current offerings, expand the breadth of markets we can address or enhance our technical capabilities. Acquisitions that we may potentially make in the future entail a number of risks that could materially adversely affect our operating and financial results, including, but not limited to:

 

   

our lack of experience acquiring other businesses;

 

   

problems integrating the acquired operations, technologies, or products with our existing business and products;

 

   

diversion of management’s time and attention from our core business;

 

   

the need for financial resources above our planned investment levels;

 

   

overestimation of potential synergies or a delay in realizing those synergies;

 

   

difficulties in retaining business relationships with suppliers and customers of the acquired company;

 

   

risks associated with entering markets in which we lack prior experience; and

 

   

the potential loss of key employees of the acquired company.

Future acquisitions also could cause us to incur debt or contingent liabilities or cause us to issue equity securities that would reduce the ownership percentages of existing stockholders. Furthermore, acquisitions could result in adverse tax consequences, substantial depreciation, deferred compensation charges, impairment of goodwill, or the amortization of amounts related to deferred compensation and to identifiable purchased intangible assets, any of which would negatively affect our operating results.

If we do not effectively manage our growth, our resources, systems, and controls may be strained and our operating results may suffer.

In recent periods, we have continued to increase the scope of our operations and the size of our workforce. This growth has placed, and any future growth of our operations will continue to place, a significant strain on our management personnel, systems, and resources. We anticipate that we will need to implement a variety of new and upgraded operational and financial systems, procedures, and controls, including the improvement of our accounting and other internal management systems. We also will need to continue to expand, train, manage, and motivate our workforce, and manage our customer and distributor relationships, develop our internal sales force, and manage our foundry and assembly and test subcontractors. All of these endeavors will require substantial management effort and skill, and we anticipate that we will require additional personnel and internal processes to manage these efforts. Our growth in recent years has also caused several key employees and members of management to take on new and greater responsibilities within our organization. If the transition to these new roles and responsibilities is not successful or completed on a timely basis, we may be unable to take full advantage of additional growth opportunities and our business could be adversely affected. We plan to fund the costs of our operational and financial systems, additional personnel, and internal processes from current cash balances and funds generated from operations. If we are unable to effectively manage our expanding operations, our revenue and operating results could be materially adversely affected.

We evaluate our internal controls over financial reporting in order to allow management to report on, and our independent auditors to attest to, our internal controls over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act of 2002 and the rules and regulations of the SEC, which we collectively refer to as Section 404. As we grow and implement new and upgraded operational and financial systems, procedures, and controls, we will need to maintain effective internal controls over

 

35


Table of Contents

financial reporting. In addition, in the course of our Section 404 compliance, we may identify deficiencies in our internal controls, some of which may be categorized as a significant deficiency or a material weakness. If we fail to correct the deficiencies that we identify and to maintain the adequacy of our internal control over financial reporting, as such standards are modified, supplemented or amended from time to time, we may not be able to ensure that we can conclude on an ongoing basis that we have effective internal control over financial reporting in accordance with Section 404. If we cannot favorably assess our internal controls, or if our independent registered public accountants are unable to provide an unqualified report on the effectiveness of our internal control over financial reporting, investor confidence in the reliability of our financial reports may be adversely affected, which could have a material adverse effect on our stock price.

We rely on the services of our key personnel, and if we are unable to retain our current personnel and hire additional personnel, our ability to develop and successfully market our products could be harmed.

We rely upon the continued service and performance of a relatively small number of key technical and senior management personnel. If we are unable to retain any of our key technical or senior management personnel, such as Jeffrey Staszak, our President and Chief Executive Officer, or are unable to fill key positions, our business could be harmed. As a result, our future success depends on retaining our management team and other key employees. We rely on these individuals for the management of our company, development of our products and business strategy, and management of our strategic relationships, and for the reliability of our financial reporting and the design and maintenance of our internal controls over financial reporting. In addition, we rely on a relatively small number of analog and mixed-signal design engineers who have the training and experience to design our products. Any of these employees could leave our company with little or no prior notice and could work with our competitors, subject to their continuing confidentiality obligations to us. We do not have “key person” life insurance policies covering any of our employees. Additionally, there are a limited number of qualified technical personnel with significant experience in the design, development, manufacture, and sale of power management semiconductors, and we may face challenges in hiring and retaining these types of employees.

If our computer and communications hardware fails, our business, results of operations and financial condition would be harmed.

Our ability to successfully operate our business depends in part on the efficient and uninterrupted operation of our computer and communications systems. Substantially all of the computer and communications hardware necessary to operate our business is located at a single leased facility. Our systems and operations are vulnerable to damage or interruption from human error, fire, flood, power loss, telecommunications failure, terrorist attacks, acts of war, break-ins, computer viruses, earthquakes and similar events, any of which may result in interruptions, delays, loss of critical data, the inability to accept and fulfill customer orders or the unauthorized disclosure of confidential customer data or proprietary technical information. We do not presently have redundant systems in multiple locations or a formal disaster recovery plan, and our business interruption insurance may be insufficient to compensate us for losses that may occur. If any of these events or interruptions were to occur, our business and results of operations could be substantially harmed.

Our principal stockholders have significant voting power and may influence actions that may not be in the best interests of our other stockholders.

Our executive officers, directors, and principal stockholders collectively hold a substantial portion of our outstanding common stock. As a result, these stockholders, acting together, may have the ability to exert substantial influence over matters requiring approval of our stockholders, including the election and removal of directors and the approval of mergers or other business combinations. This concentration of beneficial ownership could be disadvantageous to other stockholders whose interests are different from those of our executive officers, directors, and principal stockholders. For example, our executive officers, directors, and principal stockholders, acting together with stockholders owning a relatively small percentage of our outstanding stock, could delay or prevent an acquisition or merger even if the transaction would benefit other stockholders.

 

36


Table of Contents

Anti-takeover provisions of our charter documents and Delaware law could prevent or delay transactions resulting in a change in control.

Our certificate of incorporation and our bylaws may make more difficult or discourage, delay or prevent a change in the ownership of our company or a change in our management or our board of directors. The following are examples of provisions that are included in our certificate of incorporation and bylaws that might have those effects:

 

   

our board of directors is classified so that not all members of our board of directors may be elected at one time;

 

   

directors may only be removed “for cause” and only with the approval of stockholders holding a majority of our outstanding voting stock;

 

   

the ability of our stockholders to call a special meeting of stockholders is prohibited;

 

   

advance notice is required for nominations for election to our board of directors or for proposing matters that can be acted upon at stockholder meetings;

 

   

stockholder action by written consent is prohibited, thereby requiring all stockholder actions to be taken at a meeting of our stockholders; and

 

   

our board of directors may designate the terms of, and issue new series of, preferred stock, commonly referred to as “blank check” preferred stock, with rights senior to those of common stock without stockholder approval.

In addition, we are also subject to Section 203 of the Delaware General Corporation Law, which provides, subject to enumerated exceptions, that if a person acquires 15% or more of our voting stock, the person is an “interested stockholder” and may not engage in “business combinations” with us for a period of three years from the time the person acquired 15% or more of our voting stock.

These provisions may have the effect of entrenching our management team and may deprive you of the opportunity to sell your shares to potential acquirers at a premium over prevailing prices. This potential inability to obtain a premium could reduce the price of our common stock.

Item 2. Unregistered Sales of Equity Securities and Use of Proceeds

The following table provides information about our share repurchase activity for the three months ended September 30, 2012:

 

Period

   Total
Number of
Shares
Purchased
     Average
Price Paid
per Share
2
     Total Number of Shares
Purchased as Part of
Publicly Announced
Program
1
     Approximate Dollar
Value of Shares that
May Yet Be  Purchased
Under the Program
 

July 1, 2012 to July 31, 2012

     11,170       $ 23.72         11,170       $ 21,083,021   

August 1, 2012 to August 31, 2012

     48,505       $ 24.45         48,505       $ 19,896,895   

September 1, 2012 to September 30, 2012

     376,650       $ 23.31         376,650       $ 11,114,635   
  

 

 

       

 

 

    

Total

     436,325       $ 23.45         436,325      
  

 

 

       

 

 

    

 

1 Represents shares of Common Stock repurchased in the open market in connection with our share repurchase program, under which we may repurchase shares of our common stock from time to time in the open market subject to prevailing business and market conditions and other factors. Our board of directors authorized an initial $10 million and publicly announced such program on January 28, 2008, and further increased such authorization on October 20, 2008, April 24, 2009, May 20, 2010, October 22, 2010 and July 20, 2012, such that the total aggregate size of our program as of September 30, 2012 was $60 million. There is no expiration date associated with our share repurchase program.
2 Includes $0.02 per share broker commission.

 

37


Table of Contents

Item 6. Exhibits

 

Exhibit

No.

   Description

    3.1 (1)

   Amended and Restated Certificate of Incorporation of Volterra Semiconductor Corporation.

    3.2 (2)

   Amended and Restated Bylaws of Volterra Semiconductor Corporation.

    4.1

   Reference is made to Exhibits 3.1 and 3.2.

    4.2 (3)

   Specimen stock certificate.

  31.1

   Certification of Chief Executive Officer required under Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.

  31.2

   Certification of Chief Financial Officer required under Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.

  32.1*

   Certification of Chief Executive Officer required under Rule 13a-14(b) or Rule 15d-14(b) of the Securities Exchange Act of 1934, as amended, and 18 U.S.C. Section 1350.

  32.2*

   Certification of Chief Financial Officer required under Rule 13a-14(b) or Rule 15d-14(b) of the Securities Exchange Act of 1934, as amended and 18 U.S.C. Section 1350.

101.INS**

   XBRL Instance Document

101.SCH**

   XBRL Taxonomy Extension Schema

101.CAL**

   XBRL Taxonomy Extension Calculation Linkbase

101.DEF**

   XBRL Taxonomy Extension Definition Linkbase

101.LAB**

   XBRL Taxonomy Extension Label Linkbase

101.PRE**

   XBRL Taxonomy Extension Presentation Linkbase

 

(1) Previously filed as Exhibit 3.1 to Volterra Semiconductor Corporation’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2004, as filed with the Securities and Exchange Commission on September 9, 2004, and incorporated by reference herein.
(2) Previously filed as Exhibit 3.2 to Volterra Semiconductor Corporation’s Quarterly Report on Form 10-Q for the quarterly period ended September 30, 2007, as filed with the Securities and Exchange Commission on November 1, 2007, and incorporated by reference herein.
(3) Previously filed as Exhibit 4.2 to Volterra Semiconductor Corporation’s Registration Statement on Form S-1/A (No. 333-115614), as filed with the Securities and Exchange Commission on July 9, 2004, as amended, and incorporated by reference herein.
* The certifications attached as Exhibits 32.1 and 32.2 accompany this Quarterly Report on Form 10-Q pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 and shall not be deemed “filed” by Volterra Semiconductor Corporation for purposes of Section 18 of the Securities Exchange Act of 1934, as amended.
** Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability.

 

38


Table of Contents

Signature

Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

Dated: November 1, 2012     VOLTERRA SEMICONDUCTOR CORPORATION
        By:  

/s/ Mike Burns

      Mike Burns
      Chief Financial Officer
      (Principal Financial, Chief Accounting and
      Duly Authorized Officer)

 

39


Table of Contents

EXHIBIT INDEX

 

Exhibit

No.

   Description

    3.1 (1)

   Amended and Restated Certificate of Incorporation of Volterra Semiconductor Corporation.

    3.2 (2)

   Amended and Restated Bylaws of Volterra Semiconductor Corporation.

    4.1

   Reference is made to Exhibits 3.1 and 3.2.

    4.2 (3)

   Specimen stock certificate.

  31.1

   Certification of Chief Executive Officer required under Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.

  31.2

   Certification of Chief Financial Officer required under Rule 13a-14(a) or Rule 15d-14(a) of the Securities Exchange Act of 1934, as amended.

  32.1*

   Certification of Chief Executive Officer required under Rule 13a-14(b) or Rule 15d-14(b) of the Securities Exchange Act of 1934, as amended, and 18 U.S.C. Section 1350.

  32.2*

   Certification of Chief Financial Officer required under Rule 13a-14(b) or Rule 15d-14(b) of the Securities Exchange Act of 1934, as amended and 18 U.S.C. Section 1350.

101.INS**

   XBRL Instance Document

101.SCH**

   XBRL Taxonomy Extension Schema

101.CAL**

   XBRL Taxonomy Extension Calculation Linkbase

101.DEF**

   XBRL Taxonomy Extension Definition Linkbase

101.LAB**

   XBRL Taxonomy Extension Label Linkbase

101.PRE**

   XBRL Taxonomy Extension Presentation Linkbase

 

(1) Previously filed as Exhibit 3.1 to Volterra Semiconductor Corporation’s Quarterly Report on Form 10-Q for the quarterly period ended June 30, 2004, as filed with the Securities and Exchange Commission on September 9, 2004, and incorporated by reference herein.
(2) Previously filed as Exhibit 3.2 to Volterra Semiconductor Corporation’s Quarterly Report on Form 10-Q for the quarterly period ended September 30, 2007, as filed with the Securities and Exchange Commission on November 1, 2007, and incorporated by reference herein.
(3) Previously filed as Exhibit 4.2 to Volterra Semiconductor Corporation’s Registration Statement on Form S-1/A (No. 333-115614), as filed with the Securities and Exchange Commission on July 9, 2004, as amended, and incorporated by reference herein.
* The certifications attached as Exhibits 32.1 and 32.2 accompany this Quarterly Report on Form 10-Q pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 and shall not be deemed “filed” by Volterra Semiconductor Corporation for purposes of Section 18 of the Securities Exchange Act of 1934, as amended.
** Pursuant to Rule 406T of Regulation S-T, these interactive data files are deemed not filed or part of a registration statement or prospectus for purposes of Sections 11 or 12 of the Securities Act of 1933 or Section 18 of the Securities Exchange Act of 1934 and otherwise are not subject to liability.

 

40