Attached files
file | filename |
---|---|
8-K - FORM 8-K - EDAC TECHNOLOGIES CORP | c65645e8vk.htm |
Exhibit 99.1
EDAC Technologies Reports Record Sales and Operating Earnings for
Fiscal 2011 Second Quarter
Fiscal 2011 Second Quarter
Net Income Rises to $0.19 per Share on Record Sales of $21.9 Million
Backlog Totals Approximately $168 Million at Quarter-End
FARMINGTON, Conn., July 28, 2011 EDAC Technologies Corporation (NASDAQ: EDAC), a diversified
designer, manufacturer and servicer of precision components for aerospace and industrial
applications, today reported record sales of $21.9 million for the second quarter of fiscal 2011,
an increase of 16% compared with $18.8 million for the second quarter of fiscal 2010. On a
sequential basis, the 2011 second quarter sales rose more than 8% from the $20.2 million reported
for the 2011 first quarter.
Net income for the 2011 second quarter was $977,000, or $0.19 per diluted share, an increase of
183% compared to $345,000, or $0.07 per diluted share, reported for the same period of 2010.
Sequentially, the 2011 second quarter net income was more than double the $408,000, or $0.08 per
share, reported for the first quarter of 2011.
EDAC noted that all three of its major product lines, EDAC AERO, APEX Machine Tool and EDAC
Machinery, contributed to the increase in 2011 second quarter sales both sequentially and as
compared with the year-ago period. The sharp rise in net income versus the 2010 period primarily
reflected the increase in sales, as well as a higher gross margin due to more cost-effective
manufacturing of certain parts and a favorable product mix.
Sales for EDACs three major product lines, and the key factors contributing to the sales trends,
are as follows:
§ | Sales for the EDAC AERO product line were $14.3 million, an increase of 13% from the second quarter of 2010 and 4% higher than the 2011 first quarter. This primarily reflected increased shipments of fan cases, stators and other components for a number of aircraft engine programs. | |
§ | Sales for the APEX Machine Tool product line were $5.3 million in the 2011 second quarter, an increase of 10% from the year-ago first quarter and up 14% sequentially, reflecting increased demand for fixture, tooling and mold products due to the economic recovery, as well as ongoing efforts to expand the customer base and markets for APEX products. | |
§ | Sales for the EDAC Machinery product line were $2.3 million, an increase of 62% from the second quarter of last year and up 27% sequentially. This reflected stronger sales of spindle and precision grinder products to aerospace and automotive customers due to the economic recovery, as well as the Companys successful efforts to revitalize the acquired SNI and Accura Technics businesses. |
Other highlights of EDACs results for the recent period are as follows:
§ | Gross profit for the 2011 second quarter was $3.6 million, or 16.6% of sales. This compares with $2.3 million, or 12.0% of sales, in the 2010 second quarter and $2.8 million, or 13.9% of sales, in the 2011 first quarter. The gross margin increase reflected more cost-effective production processes for certain parts and a shift in sales mix to the Companys higher margin product lines. |
§ | SG&A expenses for the 2011 second quarter were $1.9 million, or 8.7% of sales, compared with $1.5 million or 8.1% of sales in the second quarter of 2010 and $1.9 million, or 9.6% of sales, in the first quarter of 2011. | |
§ | Operating income for the second quarter of 2011 was $1.7 million, up 137% from the $729,000 recorded in the 2010 second quarter and double the $864,000 recorded for the 2011 first quarter. |
For the first six months of fiscal 2011, EDACs sales increased 15% to $42.1 million from $36.6
million for the comparable 2010 period. Income from operations was $2.6 million for the first half
of 2011, up 128% from $1.1 million for the same period of 2010. Net income was $1.4 million, or
$0.27 per diluted share, for the first half of 2011. For the first half of 2010, net income was
$704,000, or $0.14 per diluted share, including other income of $360,000 from the recognition of a
deposit on an equipment purchase made by AERO prior to its acquisition.
Backlog and Outlook
Total sales backlog at July 2, 2011 was approximately $168.0 million, compared with $134.4 million
at the end of the 2011 first quarter and $135.1 million at July 3, 2010.
EDACs performance for the second quarter shows that we are achieving the critical mass of sales
needed to drive stronger margins and a more consistent level of profitability. We have
accomplished this goal by working to position each of our key product lines to capture the
opportunities in their respective markets. EDAC AERO has benefitted from our investments in
broadening the range of parts we provide to key aerospace customers, as well as in enhancing our
production capabilities. APEX Machine Tool is focused on serving larger and more complex
customer projects and was aided further by an improved economic environment. EDAC Machinery has
expanded its product portfolio and technical capabilities through acquisitions that are now
beginning to gain solid traction, said Dominick A. Pagano, EDACs President and Chief Executive
Officer.
For the remainder of 2011, we expect continued top-line growth as compared to the year-ago
periods. Based on our backlog, and past customer demands, we expect this growth to be lighter in
the third quarter and more heavily concentrated in this years fourth quarter. Over the longer
term, we believe the prospects for the aerospace industry are very favorable, as the level of
aircraft orders at the recent Paris Air Show indicates solid demand along the aerospace supply
chain beginning in the next several years, while our industrial lines will benefit as economic
conditions remain on track, Mr. Pagano concluded.
Conference Call and Webcast
The Company will host a conference call to review the above results at 10:00 a.m. (Eastern Time)
today, July 28, 2011. The call will be broadcast simultaneously over the Internet. Listeners can
access a webcast of the conference call live over the Internet at www.edactechnologies.com. Please
allow 10 minutes prior to the call to visit the site to download and install any necessary audio
software. After the call has taken place, its archived version will be available at this web site.
About EDAC Technologies Corporation
EDAC Technologies Corporation is a diversified manufacturing company serving the aerospace and
industrial markets. In the aerospace sector, EDAC offers design and manufacturing services for
commercial and military aircraft, in such areas as jet engine parts, special tooling, equipment,
gauges and components used in the manufacture, assembly and inspection of jet engines. Industrial
applications include high-precision fixtures, gauges, dies and molds, as well as the design,
manufacture and repair of precision grinders and precision spindles, which are an integral part of
machine tools found in virtually every manufacturing environment. EDACs core competencies include
extensive in-house design and engineering capabilities, and facilities equipped with the latest
enabling machine tools and manufacturing technologies.
Cautionary Statement Regarding Forward Looking Statements
This press release contains forward-looking statements within the meaning of the Private Securities
Litigation Reform Act of 1995; including forward-looking statements regarding future profitability,
expected sales and other matters that are subject to risks and uncertainties. The Company uses
words such as plans, seeks, projects, expects, believes, may, anticipates,
estimates, should, and similar expressions to identify these forward looking statements. These
statements are subject to risks
and uncertainties and are based upon the Companys beliefs and assumptions. There are a number of
important factors that may affect the Companys actual performance and results and the accuracy of
its forward-looking statements, many of which are beyond the control of the Company and are
difficult to predict. These important factors include, without limitation, factors which could
affect demand for the Companys products and services such as general economic conditions and
economic conditions in the aerospace industry and the other industries in which the Company
competes; competition from the Companys competitors; and the Companys ability to enter into
satisfactory financing arrangements. These and other factors are described in the Companys annual
and quarterly reports filed from time to time with the Securities and Exchange Commission. In
addition, the forward-looking statements included in this press release represent the Companys
expectations and beliefs as of the date of this release. The Company anticipates that subsequent
events and developments may cause these expectations and beliefs to change. However, while the
Company may elect to update these forward-looking statements at some point in the future, it
specifically disclaims any obligation or intention to do so.
CONTACTS: | EDAC Technologies Corporation Glenn L. Purple Vice President-Finance 860-677-2603 Comm-Counsellors, LLC Edward Nebb 203-972-8350 June Filingeri 203-972-0186 |
(Financial Tables Follow)
EDAC TECHNOLOGIES CORPORATION
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
UNAUDITED
CONDENSED CONSOLIDATED STATEMENTS OF OPERATIONS
UNAUDITED
(in thousands except per share amounts)
For the three months ended | For the six months ended | |||||||||||||||
July 2, | July 3, | July 2, | July 3, | |||||||||||||
2011 | 2010 | 2011 | 2010 | |||||||||||||
Sales |
$ | 21,880 | $ | 18,841 | $ | 42,079 | $ | 36,628 | ||||||||
Cost of sales |
18,249 | 16,583 | 35,639 | 32,229 | ||||||||||||
Gross profit |
3,631 | 2,258 | 6,440 | 4,399 | ||||||||||||
Selling, general and administrative
expenses |
1,903 | 1,529 | 3,848 | 3,260 | ||||||||||||
Income from operations |
1,728 | 729 | 2,592 | 1,139 | ||||||||||||
Non-operating income (expense): |
||||||||||||||||
Interest expense |
(273 | ) | (262 | ) | (533 | ) | (452 | ) | ||||||||
Other income |
3 | | 8 | 360 | ||||||||||||
Income before income taxes |
1,458 | 503 | 2,067 | 1,047 | ||||||||||||
Provision for income taxes |
481 | 158 | 682 | 343 | ||||||||||||
Net income |
$ | 977 | $ | 345 | $ | 1,385 | $ | 704 | ||||||||
Income per common share data: |
||||||||||||||||
Basic income per share |
$ | 0.20 | $ | 0.07 | $ | 0.28 | $ | 0.15 | ||||||||
Diluted income per share |
$ | 0.19 | $ | 0.07 | $ | 0.27 | $ | 0,14 | ||||||||
Weighted average shares outstanding: |
||||||||||||||||
Basic |
4,924 | 4,857 | 4,917 | 4,850 | ||||||||||||
Diluted |
5,077 | 5,102 | 5,041 | 5,029 |
EDAC TECHNOLOGIES CORPORATION
CONDENSED CONSOLIDATED BALANCE SHEETS
(in thousands)
(Unaudited) | (Audited) | |||||||
July 2, | January 1, | |||||||
2011 | 2011 | |||||||
ASSETS |
||||||||
CURRENT ASSETS: |
||||||||
Cash |
$ | 1,247 | $ | 975 | ||||
Accounts receivable, net |
17,820 | 14,955 | ||||||
Inventories, net |
21,526 | 20,219 | ||||||
Prepaid expenses and other current assets |
411 | 184 | ||||||
Refundable income taxes |
80 | 80 | ||||||
Deferred income taxes |
1,613 | 1,613 | ||||||
Total current assets |
42,697 | 38,026 | ||||||
PROPERTY, PLANT AND EQUIPMENT |
53,818 | 51,818 | ||||||
Less: accumulated depreciation |
29,939 | 28,595 | ||||||
23,879 | 23,223 | |||||||
OTHER ASSETS |
131 | 155 | ||||||
TOTAL ASSETS |
$ | 66,707 | $ | 61,404 | ||||
LIABILITIES AND SHAREHOLDERS EQUITY |
||||||||
CURRENT LIABILITIES: |
||||||||
Lines of credit |
$ | 5,722 | $ | 4,793 | ||||
Current portion of long-term debt |
2,628 | 4,370 | ||||||
Trade accounts payable |
8,049 | 7,336 | ||||||
Employee compensation and amounts withheld |
1,785 | 1,212 | ||||||
Accrued expenses |
2,226 | 2,136 | ||||||
Customer advances |
648 | 857 | ||||||
Total current liabilities |
21,058 | 20,704 | ||||||
LONG-TERM DEBT, less current portion |
13,244 | 9,858 | ||||||
PENSION LIABILITIES |
1,526 | 1,526 | ||||||
DEFERRED INCOME TAXES |
4,437 | 4,473 | ||||||
SHAREHOLDERS EQUITY: |
||||||||
Common stock |
12 | 12 | ||||||
Additional paid-in capital |
11,897 | 11,690 | ||||||
Retained earnings |
17,015 | 15,630 | ||||||
Accumulated other comprehensive loss |
(2,482 | ) | (2,489 | ) | ||||
Total shareholders equity |
26,442 | 24,843 | ||||||
TOTAL LIABILITIES AND SHAREHOLDERS EQUITY |
$ | 66,707 | $ | 61,404 | ||||