Attached files

file filename
EX-31.1 - SECTION 302 CEO CERTIFICATION - PLANAR SYSTEMS INCdex311.htm
EX-32.2 - SECTION 906 CFO CERTIFICATION - PLANAR SYSTEMS INCdex322.htm
EX-31.2 - SECTION 302 CFO CERTIFICATION - PLANAR SYSTEMS INCdex312.htm
EX-32.1 - SECTION 906 CEO CERTIFICATION - PLANAR SYSTEMS INCdex321.htm
EX-10.1 - FORM FOR RESTRICTED STOCK AGREEMENT - PLANAR SYSTEMS INCdex101.htm
Table of Contents

 

 

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

Form 10–Q

 

 

Quarterly Report Pursuant to Section 13 or 15(d) of the Securities Act of 1934

For the Quarter Ended April 1, 2011

Commission File No. 0–23018

 

 

PLANAR SYSTEMS, INC.

(exact name of registrant as specified in its charter)

 

 

 

Oregon   93-0835396

(State or other jurisdiction of

incorporation or organization)

 

(IRS Employer

Identification No.)

 

1195 NW Compton Dr., Beaverton, Oregon   97006
(Address of principal executive offices)   (zip code)

Registrant’s telephone number, including area code: (503) 748-1100

 

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  ¨    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See definitions of “large accelerated filer,” “accelerated filer” “non-accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer   ¨    Accelerated filer   ¨
Non-accelerated filer   ¨ (Do not check if a smaller reporting company)    Smaller reporting company   x

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act.):    Yes  ¨    No  x

Number of common stock outstanding as of May 4, 2011

20,366,164 shares, no par value per share

 

 

 


Table of Contents

PLANAR SYSTEMS, INC.

INDEX

 

          Page  

Part I.

   Financial Information      3   

Item 1.

   Financial Statements      3   
   Consolidated Statements of Operations for the Three and Six Months Ended April 1, 2011 and March 26, 2010 (unaudited)      3   
   Consolidated Balance Sheets as of April 1, 2011 (unaudited) and September 24, 2010      4   
   Consolidated Statements of Cash Flows for the Six Months Ended April 1, 2011 and March 26, 2010 (unaudited)      5   
   Notes to the Consolidated Financial Statements (unaudited)      6   

Item 2.

   Management’s Discussion and Analysis of Financial Condition and Results of Operations      11   

Item 4.

   Controls and Procedures      16   

Part II.

   Other Information      17   

Item 1.

   Legal Proceedings      17   

Item 1a.

   Risk Factors      17   

Item 6.

   Exhibits      27   
   Signatures      28   

 

2


Table of Contents

Part 1. FINANCIAL INFORMATION

 

Item 1. Financial Statements

Planar Systems, Inc.

Consolidated Statements of Operations

(In thousands, except per share amounts)

(unaudited)

 

     Three months ended     Six months ended  
     Apr. 1, 2011     Mar. 26, 2010     Apr. 1, 2011     Mar. 26, 2010  

Sales

   $ 47,957      $ 39,732      $ 89,720      $ 82,736   

Cost of sales

     33,972        30,351        64,077        63,463   
                                

Gross profit

     13,985        9,381        25,643        19,273   

Operating expenses:

        

Research and development, net

     2,423        2,732        5,187        5,036   

Sales and marketing

     6,502        5,875        11,997        11,098   

General and administrative

     4,211        4,005        8,439        8,380   

Amortization of intangible assets

     512        622        1,024        1,244   

Impairment and restructuring charges (Note 4)

     —          —          —          3,388   
                                

Total operating expenses

     13,648        13,234        26,647        29,146   
                                

Income (loss) from operations

     337        (3,853     (1,004     (9,873

Non-operating income (expense):

        

Interest, net

     16        (5     14        (10

Foreign exchange, net

     (694     743        (622     1,224   

Other, net

     164        57        232        11   
                                

Net non-operating income (expense)

     (514     795        (376     1,225   
                                

Loss before income taxes

     (177     (3,058     (1,380     (8,648

Income tax expense (benefit) (Note 6)

     (81     534        19        (2,340
                                

Net Loss

   $ (96   $ (3,592   $ (1,399   $ (6,308
                                

Net loss per share

        

Basic and diluted

   $ (0.00   $ (0.19   $ (0.07   $ (0.34
                                

Average shares outstanding—basic and diluted

     19,365        18,925        19,293        18,807   

See accompanying notes to unaudited consolidated financial statements.

 

3


Table of Contents

Planar Systems, Inc.

Consolidated Balance Sheets

(In thousands)

 

     Apr. 1, 2011     Sept. 24, 2010  
     (unaudited)        

ASSETS

    

Current assets:

    

Cash and cash equivalents

   $ 27,629      $ 31,709   

Accounts receivable, net of allowance for doubtful accounts of $2,093 and $2,005 at April 1, 2011 and September 24, 2010, respectively

     25,795        27,010   

Inventories

     41,060        33,397   

Other current assets

     4,786        3,924   
                

Total current assets

     99,270        96,040   

Property, plant and equipment, net

     4,526        5,347   

Intangible assets, net

     2,229        3,253   

Other assets

     4,419        3,794   
                
   $ 110,444      $ 108,434   
                

LIABILITIES AND SHAREHOLDERS’ EQUITY

    

Current liabilities:

    

Accounts payable

   $ 19,773      $ 16,130   

Current portion of capital leases

     —          4   

Deferred revenue

     1,946        1,611   

Other current liabilities

     17,282        19,800   
                

Total current liabilities

     39,001        37,545   

Other long-term liabilities

     5,763        5,513   
                

Total liabilities

     44,764        43,058   

Shareholders’ equity:

    

Preferred stock, $0.01 par value, authorized 10,000,000 shares, no shares issued

     —          —     

Common stock, no par value. Authorized 30,000,000 shares; 19,464,875 and 19,162,335 issued shares at April 1, 2011 and September 24, 2010, respectively

     181,342        180,289   

Retained earnings (deficit)

     (114,499     (112,886

Accumulated other comprehensive loss

     (1,163     (2,027
                

Total shareholders’ equity

     65,680        65,376   
                
   $ 110,444      $ 108,434   
                

See accompanying notes to unaudited consolidated financial statements.

 

4


Table of Contents

Planar Systems, Inc.

Consolidated Statements of Cash Flows

(In thousands)

(unaudited)

 

     Six months ended  
     Apr. 1, 2011     Mar. 26, 2010  

Cash flows from operating activities:

    

Net loss

   $ (1,399   $ (6,308

Adjustments to reconcile net loss to net cash provided by (used in) operating activities

    

Depreciation and amortization

     2,099        2,834   

Impairment and restructuring charges

     —          3,388   

Deferred taxes

     —          (874

Share based compensation

     889        940   

Decrease in accounts receivable

     1,692        3,083   

Increase in inventories

     (7,107     (2,523

(Increase) decrease in other assets

     (988     804   

Increase in accounts payable

     3,493        3,706   

Increase in deferred revenue

     279        454   

Decrease in other liabilities

     (2,613     (1,164

Loss on disposal of assets

     14        —     
                

Net cash provided by (used in) operating activities

     (3,641     4,340   

Cash flows from investing activities:

    

Purchase of property, plant and equipment

     (833     (700

Decrease in long-term liabilities

     —          (171
                

Net cash used in investing activities

     (833     (871

Cash flows from financing activities:

    

Payments of capital lease obligations

     (4     (98

Value of shares withheld for tax liability

     (214     (475

Net proceeds from issuance of capital stock

     164        —     
                

Net cash used in financing activities

     (54     (573

Effect of exchange rate changes

     448        (1,233
                

Net increase (decrease) in cash and cash equivalents

     (4,080     1,663   

Cash and cash equivalents at beginning of period

     31,709        30,722   
                

Cash and cash equivalents at end of period

   $ 27,629      $ 32,385   
                

See accompanying notes to unaudited consolidated financial statements.

 

5


Table of Contents

NOTES TO THE CONSOLIDATED FINANCIAL STATEMENTS

(Dollars in thousands, except per share amounts)

(Unaudited)

NOTE 1 — BASIS OF PRESENTATION

The accompanying financial statements are unaudited and have been prepared in accordance with accounting principles generally accepted in the United States. However, certain information or footnote disclosures normally included in such financial statements have been condensed or omitted pursuant to the rules and regulations of the Securities and Exchange Commission. In the opinion of management, the statements include all adjustments necessary (which are of a normal and recurring nature) for the fair presentation of the results of the periods presented. These financial statements should be read in connection with the Company’s audited financial statements for the year ended September 24, 2010. All references to a year or a quarter in these notes are to the Company’s fiscal year or quarter in the period stated. Certain balances in the 2010 financial statements have been reclassified to conform to 2011 presentations. Such reclassifications had no effect on results of operations or retained earnings.

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America (“GAAP”) requires management to make estimates and assumptions. These estimates and assumptions affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the consolidated financial statements and the reported amounts of sales and expenses during the reporting period. Actual results may differ from those estimates.

The accompanying financial statements include the accounts of the Company and its direct and indirect wholly owned subsidiaries. All intercompany accounts and transactions have been eliminated. The results of operations from the interim periods presented are not necessarily indicative of the operating results to be expected for any subsequent interim period or for the year ending September 30, 2011.

On September 25, 2010 the Company adopted the provisions of Accounting Standards Update No. 2009-14, “Software (Topic 985): Certain Revenue Arrangements That Include Software Elements — a consensus of the FASB Emerging Issues Task Force” (“ASU 2009-14”), which changes the accounting model for revenue arrangements that include both tangible products and software elements. ASU 2009-14, which was issued in October 2009 by the Financial Accounting Standards Board (“FASB”), is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The adoption of this Update did not have a material impact on the Company’s financial statements.

NOTE 2 — INVENTORIES

Inventories, stated at the lower of cost or market, consist of:

 

     Apr. 1, 2011      Sept. 24, 2010  

Raw materials

   $ 16,900       $ 12,895   

Work in process

     3,684         3,026   

Finished goods

     20,476         17,476   
                 
   $ 41,060       $ 33,397   
                 

NOTE 3 — SHAREHOLDERS’ EQUITY

In the first quarter of 2010 the Company adopted the 2009 Incentive Plan (the “2009 Plan”). This plan replaced the Company’s 1993 Stock Incentive Plan, the 1996 Stock Incentive Plan, the 1999 Non-Qualified Stock Option Plan, the 2007 New Hire Incentive Plan, the Clarity Visual Systems, Inc. 1995 Plan and Non-Qualified Stock Option Plan as well as any individual inducement awards, which are collectively referred to as the “Prior Plans.” The 2009 Plan authorizes the issuance of 1,300,000 shares of common stock. In addition, up to 2,963,375 shares subject to awards outstanding under the Prior Plans may become available for issuance under the 2009 Plan to the extent that these shares cease to be subject to the original awards (such as by expiration, cancellation or forfeiture of the awards). The maximum number of shares that may be issued under the 2009 Plan is 4,263,375 shares, including shares that may become available from the Prior Plans.

Stock options

The 2009 Plan provides for the granting of stock options. Options granted generally vest and become exercisable over a three-year period and expire seven to ten years after the date of grant. Options were last granted in the second quarter of fiscal 2008.

 

6


Table of Contents

Information regarding outstanding options is as follows:

 

     Number of
Shares
    Weighted Average
Option Prices
 

Options outstanding at September 24, 2010

     1,236,932      $ 10.41   

Granted

     —          —     

Exercised

     —          —     

Forfeited

     (1,112     6.02   

Expired

     (59,418     21.22   
                

Options outstanding at April 1, 2011

     1,176,402      $ 9.87   
                

No options were exercised during the first six months of 2011. As of April 1, 2011 the total intrinsic value of options outstanding was $11 and the options had a weighted average remaining contractual term of 3.9 years. As of April 1, 2011 there were 1,176,291 options exercisable with a weighted average exercise price of $9.87 per share, an aggregate intrinsic value of $11, and a weighted average remaining contractual life of 3.9 years.

Restricted stock

The 2009 Plan provides for the issuance of restricted stock (“nonvested shares” per the FASB Accounting Standards CodificationTM (“ASC”) Topic 718, “Compensation — Stock Compensation”). With the exception of certain grants made to the Company’s Chief Executive Officer, Chief Financial Officer, and certain of its Vice Presidents, which vest upon the achievement of certain objective performance conditions, the shares issued generally vest over a one- to three-year period based upon the passage of time.

Information regarding outstanding restricted stock awards is as follows:

 

     Number of
Shares
    Weighted Average
Grant Date Fair Value
 

Restricted stock outstanding at September 24, 2010

     1,249,891      $ 3.98   

Granted

     676,667        2.29   

Vested

     (313,402     2.99   

Canceled

     (14,167     2.67   
                

Restricted stock outstanding at April 1, 2011

     1,598,989      $ 3.47   
                

Employee Stock Purchase Plan

In fiscal 2005 the Company adopted the 2004 Employee Stock Purchase Plan (“the Purchase Plan”), which replaced the 1994 Employee Stock Purchase Plan. The Purchase Plan provides that eligible employees may contribute, through payroll deductions, up to 10% of their earnings toward the purchase of the Company’s common stock at 85% of the fair market value at specific dates. The fair value of the purchase rights is estimated on the first day of the offering period using the Black-Scholes model. In 2010 the Company’s shareholders approved an amendment to the Purchase Plan which increased the number of shares of common stock that may be purchased under the Purchase Plan from 400,000 shares to 1,400,000 shares. As of April 1, 2011 approximately 915,000 shares remained available for purchase.

Valuation and Expense Information

The following table summarizes share based compensation expense related to share based payment awards and employee stock purchases for the three and six months ended April 1, 2011 and March 26, 2010. The expense was allocated as follows:

 

7


Table of Contents
     Three Months Ended
Apr. 1, 2011
     Three Months Ended
Mar. 26, 2010
     Six Months Ended
Apr. 1, 2011
     Six Months Ended
Mar. 26, 2010
 

Cost of sales

   $ 13       $ 32       $ 30       $ 108   
                                   

Research and development

   $ 52       $ 58       $ 103       $ 130   

Sales and marketing

     113         141         232         304   

General and administrative

     247         207         524         398   
                                   

Share based compensation expense included in operating expenses

   $ 412       $ 406       $ 859       $ 832   
                                   

Share based compensation expense related to employee stock options and restricted stock awards

   $ 425       $ 438       $ 889       $ 940   
                                   

The Company recognizes compensation expense for all share based payment awards made to its employees and directors including employee stock options and employee stock purchases related to the Purchase Plan based on estimated fair values. The Company calculates the value of employee stock options on the date of grant using the Black-Scholes model. This model is also used to estimate the fair value of employee stock purchases related to the Purchase Plan. The Company values restricted stock awards at the closing price of the Company’s shares on the date of grant. As share based compensation expense recognized in the Consolidated Statement of Operations is based on awards ultimately expected to vest, it has been reduced for estimated forfeitures. Forfeitures were estimated based on historical and anticipated future experience.

Dilutive Effect of Employee Stock Benefit Plans

Basic shares outstanding for the three and six months ended April 1, 2011 were 19,365,000 and 19,293,000, respectively. Basic shares outstanding for the three and six months ended March 26, 2010 were 18,925,000 and 18,807,000, respectively. ASC Topic 260, “Earnings per Share,” requires that employee equity share options, nonvested shares and similar equity instruments granted by the Company be treated as potential common shares in computing diluted earnings per share. Diluted shares outstanding include the dilutive effect of in-the-money options which is calculated based on the average share price for each fiscal period using the treasury stock method. Under the treasury stock method, the amount that the employee must pay for exercising stock options, the amount of compensation cost for future service that the Company has not yet recognized, and the amount of tax benefits or deficiencies that would be recorded in additional paid-in capital when the award becomes deductible are assumed to be used to repurchase shares. There was no dilutive effect of in-the-money employee stock options or nonvested shares as of April 1, 2011 and March 26, 2010 due to the Company incurring a net loss in both the three and six months then ended.

NOTE 4 — IMPAIRMENT AND RESTRUCTURING CHARGES

No impairment or restructuring charges were incurred in the three and six months ended April 1, 2011. In the first quarter of 2010 the Company determined that its goodwill was impaired, and therefore recorded a $3,428 charge to write-off this balance. The goodwill impairment charge was recorded as a result of the impairment test conducted during the first quarter of 2010 following the Company’s restructuring that resulted in one operating segment, which constituted a triggering event as described by paragraph 35-10 of ASC Subtopic 350-20 “Goodwill.” The impairment test considered the Company’s average share price over a reasonable period of time and current projections of the underlying discounted cash flows of the Company. Neither of these approaches supported the carrying value of the asset. During the first quarter of 2010 the Company determined that the severance benefits related to previously recorded restructuring charges would be less than initially estimated and reduced the liability to reflect the current estimate of amounts to be paid. This revision was recorded as a $40 reduction in operating expenses for the three months ended December 25, 2009.

Restructuring charges affected the Company’s financial position as follows:

 

     Accrued
Compensation
    Other Current
Liabilities
 

Balance as of September 24, 2010

   $ 757      $ 336   

Cash paid

     (54     —     
                

Balance as of April 1, 2011

   $ 703      $ 336   
                

 

8


Table of Contents

NOTE 5 — OTHER CURRENT LIABILITIES

Other current liabilities consist of:

 

     Apr. 1, 2011      Sept. 24, 2010  

Warranty reserve

   $ 3,832       $ 3,832   

Income taxes payable

     555         1,045   

Accrued compensation

     6,665         7,236   

Other

     6,230         7,687   
                 

Total

   $ 17,282       $ 19,800   
                 

The Company provides a warranty for its products and establishes an allowance at the time of sale which is sufficient to cover costs during the warranty period. The warranty period is generally between 12 and 36 months. This reserve is included in other current liabilities.

Reconciliation of the changes in the warranty reserve is as follows:

 

     Apr. 1, 2011  
     Three months ended     Six months ended  

Balance at beginning of period

   $ 3,803      $ 3,832   

Cash paid for warranty repairs

     (818     (1,973

Provision for current period sales

     847        1,973   
                

Balance at end of period

   $ 3,832      $ 3,832   
                

NOTE 6 — INCOME TAXES

The provision (benefit) for income taxes for the second quarter of 2011 was recorded based upon the current estimate of the Company’s annual effective tax rate. Generally, the provision (benefit) for income taxes is the result of a mix of profits (losses) the Company and its subsidiaries earn in tax jurisdictions with a broad range of income tax rates. The tax benefit of $81 for the three months ended April 1, 2011 was driven by tax expense in certain foreign jurisdictions and state taxes, offset by larger benefits resulting from losses in other foreign jurisdictions. The tax expense of $19 for the six months ended April 1, 2011 was also driven by an equal mix of tax expense in certain foreign jurisdictions and state taxes, offset by benefits resulting from losses in other foreign jurisdictions.

The effective tax rate of 45.8% for the three months ended April 1, 2011 differs from the federal statutory rate largely as a result of the Company’s valuation allowance on its U.S. net operating losses during the quarter. Other significant factors include the effects of the Company’s operations in foreign jurisdictions with different tax rates, and the provision for state income taxes.

The Company establishes a valuation allowance for deferred tax assets when it is more likely than not that such deferred tax assets will not be realized. In fiscal 2007 the Company determined that a valuation allowance should be recorded against all of its United States and French deferred tax assets. As of April 1, 2011 the valuation allowance is still in place for all of its U.S. tax assets. While a valuation allowance is still in place for financial statement purposes as of April 1, 2011, the valuation allowance does not limit the Company’s ability to utilize the loss-carryforwards or other deferred tax assets on future tax returns.

As of April 1, 2011 there have been no material changes to the amount of unrecognized tax benefits under ASC Topic 740, “Income Taxes.” The Company does not anticipate that total unrecognized tax benefits will change significantly within the next 12 months.

The Company is subject to taxation primarily in the United States, Finland, and France, as well as certain state (including Oregon and California) and other foreign jurisdictions. The Company’s larger jurisdictions generally provide for statutes of limitations from three to five years. The Company has settled with the Internal Revenue Service on their examination of all U.S. federal income tax matters through fiscal year 2006. The Company has also settled the Finnish tax authority’s examination of the Company’s returns for all tax years through 2006. In January 2011 the French tax authority began a routine examination of the Company’s French tax returns for fiscal years 2009 and 2010. The Company does not anticipate total gross unrecognized tax benefits will significantly change, either as a result of full or partial settlement of audits or the expiration of statutes of limitations within the next 12 months.

The Company has not provided for United States income taxes on the undistributed earnings of foreign subsidiaries because they are considered permanently invested outside of the United States. If repatriated, these earnings would generate foreign tax credits, which may reduce the federal tax liability associated with any future foreign dividend. As of April 1, 2011 the undistributed earnings of these foreign operations were approximately $4,200.

 

9


Table of Contents

NOTE 7 — BORROWINGS

The Company’s credit agreement was amended on November 18, 2010 and allows for borrowing up to 80% of its eligible domestic accounts receivable with a maximum borrowing capacity of $12.0 million. The credit agreement, as amended, has an interest rate of LIBOR + 3.0%, expires on December 1, 2011, and is secured by substantially all of the assets of the Company. There were no amounts outstanding under the Company’s credit agreement as of April 1, 2011 and September 24, 2010. The credit agreement contains certain financial covenants, with which the Company was in compliance as of April 1, 2011.

 

10


Table of Contents
Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following information should be read in conjunction with the consolidated interim financial statements and the notes thereto in Part I, Item I of this Quarterly Report and with the section entitled “Management’s Discussion and Analysis of Financial Condition and Results of Operations” contained in the Company’s Annual Report on Form 10-K for the year ended September 24, 2010.

FORWARD-LOOKING STATEMENTS

This Management’s Discussion and Analysis of Financial Condition and Results of Operations and other sections of this Report include “forward-looking statements” within the meaning of the Private Securities Litigation Reform Act of 1995. These statements are made pursuant to the safe harbor provisions of the federal securities laws. These and other forward-looking statements, which may be identified by the inclusion of words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,” “estimates,” “goal” and variations of such words and other similar expressions, are based on current expectations, estimates, assumptions and projections that are subject to change, and actual results may differ materially from the forward-looking statements. These statements are not guarantees of future performance and involve certain risks and uncertainties that are difficult to predict. Many factors, including the following, could cause actual results to differ materially from the forward-looking statements: poor or further weakened domestic and international business and economic conditions; changes or continued reductions in the demand for products in the various display markets served by the Company; any delay in the timing of customer orders or the Company’s ability to ship product upon receipt of a customer order; the extent and timing of any additional expenditures by the Company to address business growth opportunities; any inability to reduce costs or to do so quickly enough, in either case, in response to reductions in revenue; adverse impacts on the Company or its operations relating to or arising from any inability to fund desired expenditures, including due to difficulties in obtaining necessary financing; changes in the flat panel monitor industry; changes in customer demand or ordering patterns; changes in the competitive environment including pricing pressures or the ability to keep pace with technological changes; technological advances; shortages of manufacturing capacity from the Company’s third-party manufacturing partners or other interruptions in the supply of components the Company incorporates in its finished goods including as a result of the recent earthquakes and tsunami in Japan; future production variables resulting in excess inventory and other risk factors described under Part II, Item 1A. The forward-looking statements contained in this report speak only as of the date on which they are made, and the Company does not undertake any obligation to update any forward-looking statement to reflect events or circumstances after the date of this Report. If the Company does update one or more forward-looking statements, it should not be concluded that the Company will make additional updates with respect thereto or with respect to other forward-looking statements.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Except for the adoption of ASU 2009-14, as described below, the Company reaffirms the critical accounting policies and use of estimates reported in its Form 10-K for the year ended September 24, 2010.

On September 25, 2010 the Company adopted the provisions of ASU 2009-14, which changes the accounting model for revenue arrangements that include both tangible products and software elements. ASU 2009-14, which was issued in October 2009 by the Financial Accounting Standards Board, is effective prospectively for revenue arrangements entered into or materially modified in fiscal years beginning on or after June 15, 2010. The adoption of this Update did not have a material impact on the Company’s financial statements.

INTRODUCTION

Planar Systems, Inc. is a provider of specialty display products, solutions, and services for customers in a number of end-market segments. Products include display components, completed displays, and display solutions and systems based on a variety of flat panel and front- and rear-projection technologies. The Company has a global reach with sales offices in North America, Europe, and Asia.

The electronic specialty display industry is driven by the proliferation of display products, from both the increase in “smart” devices and the availability and versatility of LCD flat panel displays at increasingly lower costs; the ongoing need for system providers and integrators to rely on display experts to provide customized solutions; and from the growth in the market for targeted marketing and messaging to consumers using digital signage in a variety of form factors in both indoor and outdoor applications.

Unless context otherwise requires, or as otherwise indicated, “we,” “us,” “our” and similar terms, as well as references to the “Company” and “Planar,” refer to Planar Systems, Inc. and, unless the context requires otherwise, includes all of the Company’s consolidated subsidiaries.

 

11


Table of Contents

The Company’s Strategy

For over a quarter century, Planar has been designing and bringing to market innovative display solutions. The Company focuses on customized or specialty display products and systems, generally in niche display markets where requirements are more stringent, innovation is valued, and the customer is not served or is underserved by the mass-market, commodity display providers.

The Company’s Markets

Planar delivers products for a variety of uses and categorizes the markets it serves as follows: Custom and Embedded, Video Wall, Information Technology, and High-end Home.

Custom and Embedded

The Company leverages its historical core competency in Electroluminescent (“EL”) technologies and employs these technologies to focus on providing customized, embedded, and ruggedized displays to Original Equipment Manufacturers (“OEMs”) and other system suppliers. Key technologies used in products sold to this market also include customized Active-Matrix Liquid Crystal Display (“AMLCD”) panels. These technologies are used in a variety of applications and industries including instrumentation, medical equipment, vehicle dashboards, indoor and outdoor digital signage (including quick serve restaurant outdoor menu boards), and military applications, all of which require functionality in demanding usage conditions such as rugged outdoor conditions, extreme temperatures, instances where shaking or shock is expected, or applications that necessitate 3-D imaging.

Video Wall

The Company serves the video wall display market by offering both high-resolution flat panel LCD video walls and rear-projection cube video walls for use in large venue digital signage as well as various control room installations. The Company has marketed these products under the Clarity brand since 2006 when the Company acquired Clarity Visual Systems, Inc. (“Clarity”). Digital signage video wall installations are used in a growing list of retail, airport, sports arena, and other locations while control room installations are typically found in the security, governmental, telecom, energy, industrial, broadcast, and transportation sectors. The market for control room video wall solutions is driven by the development, expansion, and upgrade of industrial infrastructure such as power plants, transportation systems, communication systems, and security monitoring. LCD flat panel video walls used in the retail and large venue end-markets are increasing as LCD costs have declined and as LCD technology has made advancements to allow panel tiling with smaller bezels (Super Narrow Bezel technology), enabling a growing number of installations especially in new digital signage applications.

Information Technology (“IT”)

The Company capitalizes on its strong supply chain, logistics, and distribution relationships to sell a variety of primarily LCD based displays to the IT market. These strong relationships give the Company the ability to drive revenues in a number of product categories, including desktop monitors, touch displays, widescreen monitors, and front-projection equipment through its network of IT resellers.

High-end Home

The Company serves the high-end home market with its high-performance home theater front-projection video systems, video processing equipment, large-format thin video displays, “window wall” video applications, and a number of accessories. The Company has sold these products under the Runco brand since 2007 when it acquired the business assets of Runco International, Inc. (“Runco”), an industry leader in high-end, luxury video products. Planar’s Runco products are primarily sold to its established network of custom home installation dealers in the United States.

Overview

The Company recorded sales of $48.0 million in the three months ended April 1, 2011 (the “second quarter of 2011”), which was an increase of $8.3 million or 20.7% as compared to sales of $39.7 million in the three months ended March 26, 2010 (the “second quarter of 2010”). In the six months ended April 1, 2011 (the “first six months of 2011”), sales were $89.7 million, which was an increase of $7.0 million or 8.4% as compared to $82.7 million in sales during the six months ended March 26, 2010 (the “first six months of 2010”). The increase in both the three and six months ended April 1, 2011 as compared to the same periods of 2010 was primarily due to increases in sales of digital signage products, including tiled flat panel LCD video wall systems and other custom digital signage solutions, and also due to increases in sales of rear-projection cubes and desktop monitors.

In the second quarter of 2011 income from operations was $0.3 million as compared to a $3.9 million loss from operations in the second quarter of 2010. For the first six months of 2011 loss from operations was $1.0 million as compared to a $9.9 million loss from operations in the first six months of 2010.

 

12


Table of Contents

In the second quarter of 2011 net loss was $0.1 million or $0.00 per basic and diluted share as compared to a net loss of $3.6 million or $0.19 per basic and diluted share in the second quarter of 2010. For the first six months of 2011 net loss was $1.4 million or $0.07 per basic and diluted share as compared to a net loss of $6.3 million or $0.34 per basic and diluted share in the first six months of 2010.

The Company continues to experience strong end-market demand for its digital signage products, as customers adopt its LCD video wall systems and other custom digital signage products for use in venues requiring large format viewing, including retail applications, sports arenas, airports, and other venues. Digital signage opportunities also include ruggedized custom displays and touch applications. The Company believes that it can derive increased revenue related to new and emerging digital signage opportunities as these markets continue to grow in the United States, Europe and Asia. As the Company pursues growth opportunities, particularly in the digital signage market, it continues to drive focused investments in product development and sales and marketing to better position itself to capitalize on these opportunities.

Sales

The Company’s sales of $48.0 million in the second quarter of 2011 increased $8.3 million or 20.7% from $39.7 million in the second quarter of 2010. The increase in sales was primarily due to increases in sales of digital signage products including LCD flat panel displays, tiled LCD video wall systems, and other custom digital signage products. The increase in sales was also due to increases in sales of rear-projection cubes and desktop monitors. These increases were partially offset by decreases in sales of high-end home products. Sales of digital signage products increased 68% due primarily to a 63% increase in volumes sold in the second quarter of 2011 as compared to the same period of 2010. This increase was primarily a result of improved demand as the Company’s existing customers increased investment in large capital projects, and as the Company added new customers in application areas such as indoor retail digital signage. Sales of digital signage products were also positively impacted by the fulfillment of orders related to large design wins of customized digital signage products. Growth in the sales of the Company’s LCD flat panel displays was due to strong demand for the Company’s product lines offering ultra-thin LED technology. Sales of rear-projection cubes increased 47% due primarily to a 44% increase in volumes sold. This increase was primarily driven by strong customer demand for the Company’s LED-based cubes, which were first sold in the third quarter of 2010, as product technology transitioned away from lamp-based cubes. Sales of desktop monitors increased 23% as a result of a 20% increase in volumes sold, as the Company’s existing IT resellers increased purchases and as the Company added new resellers to enlarge market presence in an effort to drive sales growth. Sales of high-end home products decreased 30%, due to 18% and 15% decreases in volumes and average selling prices, respectively. Volumes decreased in the second quarter of 2011 as compared to the same period of 2010 due to the timing of new product introductions, as the second quarter of 2010 was positively impacted by introductory sales of lamp-less, LED-based projectors, including dealer demonstration units, which were first sold in the first quarter of 2010. Average selling prices of high-end home products decreased due to changes in product mix, rather than changes in the relative pricing of these products.

In the first six months of 2011, sales were $89.7 million as compared to sales of $82.7 million in the first six months of 2010. The increase of $7.0 million or 8.4% was primarily due to increases in sales of digital signage products including LCD flat panel displays, tiled LCD video wall systems, and other custom digital signage products. Sales for the first half of 2011 were also positively impacted by increases in sales of rear-projection cubes, desktop monitors, and touch displays. These increases were partially offset by decreases in sales of high-end home and 3-D stereomirror products. Sales of digital signage products increased 44% primarily due to a 46% increase in volumes sold. Sales of rear-projection cubes increased 23% due primarily to a 32% increase in the volume of units sold. Sales of desktop monitors increased 15% due primarily to a 20% increase in volumes sold. The increases in volumes of digital signage products, rear-projection cubes, and desktop monitors sold in the first six months of 2011 as compared to the first six months of 2010 were due to the reasons discussed above. Sales of touch displays increased 13% as a result of the Company’s continued focus of sales and marketing resources on these product lines, which resulted in a 21% increase in volumes sold. These increases were partially offset by a 29% decrease in sales of high-end home products, which were negatively impacted by the timing of product introductions. The increases in sales in the first six months of 2011 were also offset by a 21% decrease in sales of 3-D stereomirror products due to changes in product mix as customer demand shifted to the Company’s lower-priced product offerings.

International sales increased $4.7 million or 44.6% to $15.3 million in the second quarter of 2011 as compared to $10.6 million in the second quarter of 2010. As a percentage of total sales, international sales increased from 26.7% to 31.9% in the second quarter of 2011 as compared to the same period of the prior year. International sales increased $4.5 million or 18.7% from $24.1 million in the first six months of 2010 to $28.6 million in the first six months of 2011. As a percentage of total sales, international sales increased from 29.1% to 31.8% in the first six months of 2011 as compared to the same period of 2010. The increases in international sales in both the three and six months ended April 1, 2011 were primarily due to increased demand for the Company’s products in countries outside of the United States, specifically in China where the Company has invested in sales and marketing efforts to drive growth and capture market share. The Company does not have material sales to any particular country outside the United States.

 

13


Table of Contents

Gross Profit

Gross profit as a percentage of sales increased to 29.2% in the second quarter of 2011 from 23.6% in the second quarter of 2010. Total gross profit increased $4.6 million or 49.1% to $14.0 million in the second quarter of 2011 as compared to $9.4 million in the same period of the previous year. The increase in gross profit was due primarily to a favorable product mix of higher margin products such as LCD video wall systems and touch displays, relative to sales of lower margin products such as projectors sold to the High-end Home and IT end-markets. The increase was also the result of gross profit in the second quarter of 2010 being negatively affected by lower estimates of inventory values as rear-projection cubes transitioned from lamp-based to LED-based platforms.

For the first six months of 2011, gross profit as a percentage of sales increased to 28.6% from 23.3% in the first six months of 2010. Total gross profit increased $6.3 million or 33.1% to $25.6 million in the first six months of 2011 as compared to $19.3 million in the first six months of 2010. Gross profit increased in the first half of 2011 primarily due to reasons discussed above.

Research and Development

Research and development expenses decreased $0.3 million or 11.3% to $2.4 million in the second quarter of 2011 from $2.7 million in the same period of the prior year. The decrease was primarily the result of lower project spending and higher customer reimbursements for non-recurring engineering costs, which decreases research and development expenses. Research and development expenses were $5.2 million and $5.0 million in the first six months of 2011 and 2010, respectively. The $0.2 million or 3.0% increase in the first six months of 2011 was primarily due to higher professional service costs to support new product designs as part of the Company’s initiative to drive future sales in higher margin growth markets.

As a percentage of sales, research and development expenses decreased to 5.1% in the second quarter of 2011 as compared to 6.9% in the same period of 2010. The decrease was due primarily to lower research and development expenses, offset by an increase in sales. As a percentage of sales, research and development expenses decreased to 5.8% in the first six months of 2011 as compared to 6.1% in the first six months of 2010. The decrease was due primarily to research and development expenses increasing at a slower rate than sales in that period.

Sales and Marketing

Sales and marketing expenses increased $0.6 million or 10.7% to $6.5 million in the second quarter of 2011 as compared to $5.9 million in the same period of the prior year. This increase was primarily due to an increase in program spending in an effort to drive growth and market penetration, especially in the growing digital signage and touch display markets. Sales and marketing expenses also increased due to higher headcount in the second quarter of 2011 as compared to the second quarter of 2010. For the first six months of 2011, sales and marketing expenses increased $0.9 million or 8.1% to $12.0 million as compared to $11.1 million in the first six months of 2010. The six-month increase in sales and marketing expenses was primarily due to an increase in headcount and program spending.

As a percentage of sales, sales and marketing expenses decreased to 13.6% in the second quarter of 2011 as compared to 14.8% in the same period of the prior year due to sales and marketing expenses increasing at a slower rate than sales in that period. In both the first six months of 2011 and 2010, sales and marketing expenses were 13.4% of sales.

General and Administrative

General and administrative expenses increased $0.2 million or 5.1% to $4.2 million in the second quarter of 2011 from $4.0 million in the second quarter of 2010. The increase in general and administrative expenses was primarily due to increases in compensation-related items including share based compensation expense recorded in the second quarter of 2011 as compared to the second quarter of 2010. This increase was partially offset by lower spending on professional services. General and administrative expenses were $8.4 million in the first six months of both 2011 and 2010.

As a percentage of sales, general and administrative expenses decreased to 8.8% in the second quarter of 2011 as compared to 10.1% in the second quarter of 2010. This decrease was primarily due to general and administrative expenses increasing at a slower rate than sales in that period. As a percentage of sales, general and administrative expenses decreased to 9.4% from 10.1% in the first six months of 2011 and 2010, respectively. This decrease was due primarily to the increase in sales in the first six months of 2011 as compared to the first six months of 2010, while general and administrative expenses remained flat over the same period.

Amortization of Intangible Assets

Expenses for the amortization of intangible assets were $0.5 million and $0.6 million in the second quarters of 2011 and 2010, respectively. In the first six months of 2011, amortization expenses were $1.0 million as compared to $1.2 million in the same period of 2010. The decrease in amortization expenses for both the three and six months ended April 1, 2011 was the result of certain

 

14


Table of Contents

intangible assets that became fully amortized in the fourth quarter of 2010 and as such had no related amortization expense in the first six months of 2011. As of April 1, 2011 the identifiable intangible assets subject to amortization, net of accumulated amortization, consisted of $0.8 million for developed technology and $1.4 million for customer relationships. These assets are being amortized over their remaining estimated useful lives of approximately 1.8 years. When these assets were acquired, the amortization periods were between four and seven years.

Impairment and Restructuring Charges

No impairment or restructuring charges were incurred in the first six months of 2011. During the first quarter of 2010, the Company recorded $3.4 million in impairment and restructuring charges. As discussed in Note 4 — Impairment and Restructuring Charges, the charges consisted primarily of a charge to write-off the goodwill previously reflected on the Company’s balance sheet as it was determined to be impaired.

Total Operating Expenses

Total operating expenses increased $0.4 million or 3.1% to $13.6 million in the second quarter of 2011 from $13.2 million in the same period of the prior year. The increase in operating expenses was primarily due to increases in sales and marketing and general and administrative expenses, which were partially offset by decreases in research and development expenses and the amortization of intangible assets. In the first six months of 2011, total operating expenses decreased $2.5 million or 8.6% to $26.6 million as compared to $29.1 million in the same period of 2010. The decrease in total operating expenses was primarily due to the $3.4 million of impairment and restructuring charges that were recorded in the first six months of 2010, which increased expenses in that period. This decrease was partially offset by increases in sales and marketing expenses to drive specific initiatives aimed at future growth.

As a percentage of sales, total operating expenses decreased to 28.5% in the second quarter of 2011 from 33.3% in the same period of the prior year. This decrease was primarily due to total operating expenses increasing at a slower rate than sales over those periods. As a percentage of sales, total operating expenses decreased to 29.7% in the first six months of 2011 as compared to 35.2% in the first six months of 2010. This decrease was primarily due to the impairment and restructuring charges recorded in the first six months of 2010.

Non-operating Income and Expense

Non-operating income and expense includes interest income on investments, interest expense, net foreign exchange gain or loss and other income or expense. Net interest income was $16 thousand in the second quarter of 2011 as compared to net interest expense of $5 thousand in the same period of the prior year. For the first six months of 2011, net interest income was $14 thousand as compared to net interest expense of $10 thousand in the same period of the prior year.

Foreign currency exchange gains and losses are related to timing differences in the receipt and payment of funds in various currencies and the conversion of cash, accounts receivable and accounts payable denominated in foreign currencies to the applicable functional currency. Foreign exchange gains and losses amounted to a net loss of $0.7 million in the second quarter of 2011 as compared to a net gain of $0.7 million in the second quarter of 2010. In the first six months of 2011, foreign currency exchange gains and losses amounted to a net loss of $0.6 million as compared to a net gain of $1.2 million in the same period of the prior year. The losses in both the three and six months ended April 1, 2011 were primarily due to the weakening of the U.S. Dollar as compared to the Euro in those periods. Comparatively, the gains in both the three and six months ended March 26, 2010 were primarily due to the strengthening of the U.S. Dollar as compared to the Euro in those periods.

Net other income was $0.2 million and $0.1 million in the second quarters of 2011 and 2010, respectively. Net other income was $0.2 million and $11 thousand for the first six months of 2011 and 2010, respectively.

Provision (Benefit) for Income Taxes

In the second quarter of 2011 the Company recorded an income tax benefit of $0.1 million on a pretax loss of $0.2 million, resulting in an effective tax rate of 45.8%. Comparatively, income tax expense was $0.5 million in the second quarter of 2010 on a pretax loss of $3.1 million, resulting in a negative effective tax rate of 17.5%. The tax benefit for the second quarter of 2011 was largely driven by tax expense in certain foreign jurisdictions and state taxes, offset by larger benefits resulting from losses in other foreign jurisdictions.

For the first six months of 2011 the Company recorded an income tax expense of $19 thousand on a pretax loss of $1.4 million. Comparatively, the Company recorded an income tax benefit of $2.3 million on a pretax loss of $8.6 million in the first six months of 2010. The prior year’s six-month $2.3 million tax benefit was largely driven by the one-time five-year net operating loss (“NOL”) carryback provision created by Public Law 111-92, the “Worker, Homeownership, and Business Assistance Act of 2009.” The effective tax rates for the six months ended April 1, 2011 and March 26, 2010 were negative 1.4% and 27.1%, respectively. The

 

15


Table of Contents

difference between the effective tax rate and the federal statutory tax rate is due primarily to a valuation allowance on the Company’s U.S. deferred tax assets, the provision for state income taxes, and the effects of the Company’s operations in foreign jurisdictions with different tax rates. During periods of time in which a valuation allowance is required for GAAP accounting purposes, the effective tax rate recorded will not represent the Company’s longer-term normalized tax rate in profitable times. Additionally, given the relationship between fixed dollar tax items and pretax financial results, the effective tax rate can change materially based on small variations of income.

Net Loss

In the second quarter of 2011, net loss was $0.1 million or $0.00 per basic and diluted share, as compared to net loss of $3.6 million or $0.19 per basic and diluted share in the same period of the prior year. For the first six months of 2011, net loss was $1.4 million or $0.07 per basic and diluted share, as compared to net loss of $6.3 million or $0.34 per basic and diluted share for the first six months of 2010.

Liquidity and Capital Resources

Net cash used in operating activities was $3.6 million in the first six months of 2011 as compared to cash provided by operating activities of $4.3 million in the first six months of 2010. Net cash used in operations in the first six months of 2011 primarily relates to an increase in inventories, a decrease in other liabilities, and the net loss incurred in that period. These were partially offset by an increase in accounts payable, a decrease in accounts receivable, and non-cash charges including depreciation and amortization and share based compensation, which do not require a current cash outlay.

Working capital increased $1.8 million to $60.3 million at April 1, 2011 from $58.5 million at September 24, 2010. Current assets increased $3.3 million to $99.3 million at April 1, 2011 as compared to $96.0 million at September 24, 2010 due to increases in inventories and other current assets, which were partially offset by decreases in cash and accounts receivable. The $7.7 million increase in inventories was primarily to support the Company’s growth initiatives and new product launches, and also due to the timing of purchases. Other current assets increased $0.9 million due primarily to increases in non-trade receivables, prepaid expenses, and advanced payments. The $4.1 million decrease in cash was primarily due to the inventory purchases made in the second quarter of 2011. Accounts receivables decreased $1.2 million due to the timing of cash receipts. Current liabilities increased $1.5 million to $39.0 million at April 1, 2011 from $37.5 million at September 24, 2010 due primarily to increases in accounts payable and deferred revenue, which were partially offset by decreases in other current liabilities. The $3.6 million increase in accounts payable was related to the increase in inventories and due to the timing of payments made to the Company’s vendors. Other current liabilities decreased $2.5 million due primarily to payments made to customers for rebates accrued in prior periods and also due to decreases in accrued compensation.

The Company’s credit agreement was amended on November 18, 2010 and allows for borrowing up to 80% of its eligible domestic accounts receivable with a maximum borrowing capacity of $12.0 million. The credit agreement, as amended, has an interest rate of LIBOR + 3.0%, expires on December 1, 2011, and is secured by substantially all of the assets of the Company. There were no amounts outstanding under the Company’s credit agreement as of April 1, 2011 and September 24, 2010. The credit agreement contains certain financial covenants, with which the Company was in compliance as of April 1, 2011.

The Company’s position on indefinite reinvestment of unremitted earnings from foreign operations may limit its ability to transfer cash between or across foreign and U.S. operations.

Recent Accounting Pronouncements

There have been no recent accounting pronouncements or changes in accounting pronouncements during the second quarter of 2011 that are of significance to the Company.

 

Item 4. Controls and Procedures

An evaluation was carried out under the supervision and with the participation of the Company’s management, including the Chief Executive Officer (“CEO”) and the Chief Financial Officer (“CFO”), of the effectiveness of the Company’s disclosure controls and procedures as of the end of the period covered by this report. Based on that evaluation, the CEO and CFO have concluded that the Company’s disclosure controls and procedures are effective. There were no significant changes in the Company’s internal controls or in other factors during the quarter ended April 1, 2011 that could significantly affect the Company’s internal controls over financial reporting.

 

16


Table of Contents

Part II. OTHER INFORMATION

 

Item 1. Legal Proceedings

There are no material pending legal proceedings, other than ordinary routine litigation incidental to the business, to which the Company is a party or to which any of its property is subject.

 

Item 1A. Risk Factors

The following issues, risks, and uncertainties, among others, should be considered in evaluating the Company’s future financial performance and prospects for growth.

The risks inherent in the Company’s operations could be heightened by an ongoing worldwide economic slowdown and lack of credit availability.

In the recent past, general worldwide economic conditions have experienced a dramatic downturn due to credit conditions, liquidity concerns, slower economic activity, concerns about inflation and deflation, decreased consumer confidence, reduced corporate profits and capital spending, and adverse business conditions. These conditions make it extremely difficult for the Company’s customers, the Company’s vendors, and the Company to accurately forecast and plan future business activities. In this time of economic difficulties, the Company’s financial performance and prospects for growth are subject to heightened risks including, but not limited to, the risk that the poor and economic conditions could result in:

 

   

vendors declaring bankruptcy or otherwise ceasing operations which could result in difficulties obtaining, or increases in the price of, components and materials required for the Company’s products;

 

   

a rapid or unexpected decrease in demand for the Company’s products which could reduce sales and/or result in the Company carrying excess inventories;

 

   

reduced capital spending and difficulties in customers’ ability to obtain sufficient credit; and/or

 

   

a decline in customers’ businesses which could result in their inability to pay their vendors in a timely manner, declaring bankruptcy or otherwise ceasing operations, any of which could harm the Company’s ability to collect on amounts due from its customers in a timely manner, or at all. The Company does maintain allowances for estimated losses resulting from the inability of its customers to make required payments.

The Company took a number of measures to reduce costs in response to the worldwide economic downturn over the past two years, and the related decreases in revenue levels. However, the Company has since begun to make additional expenditures to better position it for future sales growth given the general improvement in global economies, especially in the emerging world. If customer demand were to not improve, or slow down, the Company might be unable to adjust expense levels rapidly enough in response to falling demand or without changing the way in which it operates. If revenues were to decrease further and the Company was unable to adequately reduce expense levels, it might incur significant losses that could potentially adversely affect the Company’s overall financial performance and the market price of the Company’s common stock.

The Company’s operating results can fluctuate significantly.

In addition to the variability resulting from the short-term nature of commitments from the Company’s customers, other factors can contribute to significant periodic fluctuations in its results of operations. These factors include, but are not limited to, the following:

 

   

the receipt and timing of orders and the timing of delivery of orders;

 

   

the inability to adjust expense levels or delays in adjusting expense levels, in either case in response to lower than expected revenues or gross margins;

 

   

the volume of orders relative to the Company’s capacity;

 

   

product introductions and market acceptance of new products or new generations of products;

 

   

evolution in the lifecycles of customers’ products;

 

   

changes in cost and availability of labor and components;

 

   

variations in revenue and gross margins relating to the mix of products available for sale and the mix of products sold from period to period;

 

   

availability of sufficient quantities of the components of the Company’s products;

 

17


Table of Contents
   

variation in operating expenses;

 

   

vesting of restricted stock based upon achievement of certain performance measures;

 

   

pricing and availability of competitive products and services;

 

   

general economic conditions and changes — whether or not anticipated — in economic conditions; and

 

   

the ability to use cash flow to fund working capital, capital expenditures, development projects, acquisitions, and other general corporate purposes, which could be limited by any Company indebtedness and the covenants of the Company’s existing credit facility.

Accordingly, the results of any past periods should not be relied upon as an indication of the Company’s future performance. It is possible that, in some future period, the Company’s operating results may be below expectations of public market analysts and/or investors. If this occurs, the Company’s stock price may decrease.

The Company faces intense competition.

Each of the markets served by the Company is highly competitive, and the Company expects this to continue and even intensify. The Company believes that over time this competition will have the effect of reducing average selling prices of its products. Certain of the Company’s competitors have substantially greater name recognition and financial, technical, marketing and other resources than does the Company. There is no assurance that the Company will not face additional competitors or that the Company’s competitors will not succeed in developing or marketing products that would render the Company’s products obsolete or noncompetitive. To the extent the Company is unable to compete effectively, its business, financial condition and results of operations would be materially adversely affected. The Company’s ability to compete successfully depends on a number of factors, both within and outside its control. These factors include, but are not limited to:

 

   

the Company’s effectiveness in designing new product solutions, including those incorporating new technologies;

 

   

the Company’s ability to anticipate and address the needs of its customers;

 

   

the Company’s ability to develop innovative, new technologies;

 

   

the Company’s ability to develop effective technology;

 

   

the quality, performance, reliability, features, ease of use, pricing and diversity of the Company’s product solutions;

 

   

foreign currency fluctuations, which may cause competitors’ products to be priced significantly lower than the Company’s product solutions;

 

   

the quality of the Company’s customer services;

 

   

the effectiveness of the Company’s supply chain management;

 

   

the Company’s ability to identify new vertical markets and develop attractive products to address the needs of such markets;

 

   

the Company’s ability to develop and maintain effective sales channels;

 

   

the rate at which customers incorporate the Company’s product solutions into their own products; and

 

   

product or technology introductions by the Company’s competitors.

The Company’s success depends on the development of new products and technologies.

Future results of operations will partly depend on the Company’s ability to continue to improve and market its existing products, while also successfully developing and marketing new products and developing new markets for existing products and technologies. If the Company fails to do this, its existing products or technologies could become obsolete or noncompetitive. Additionally, if the Company were unable to successfully execute its transition from existing products to new offerings or technologies, it could result in the Company holding excess or obsolete inventory, which could have a material adverse effect on the Company’s business, financial condition, and results of operations. In the past, the Company has reduced its spending on research and development projects as it focuses on overall cost reductions. The Company may be required to reduce research and development expenditures in future periods as a part of cost reduction programs. These reductions could impact the Company’s ability to improve its existing products and to successfully develop new products in the future.

 

18


Table of Contents

New products and markets, by their nature, present significant risks and even if the Company is successful in developing new products, they typically result in pressure on gross margins during the initial phases as start-up activities are spread over lower initial sales volumes. The Company has experienced lower margins from new products and processes in the past, which have negatively impacted overall gross margins. In addition, customer relationships can be negatively impacted due to production problems and late delivery of shipments. Future operating results will depend on the Company’s ability to continue to provide new product solutions that compare favorably on the basis of cost and performance with competitors. The Company’s success in attracting new customers and developing new business depends on various factors, including, but not limited to, the following:

 

   

developing and/or deploying advances in technology;

 

   

developing innovative products for new markets;

 

   

offering efficient and cost-effective services;

 

   

timely completing of the design and manufacture of new product solutions; and

 

   

adequately protecting the Company’s proprietary property.

The Company must continue to add value to its portfolio of offerings.

Traditional display components are subject to increasing competition to the point of commodification. In addition, advances in core LCD technology make standard displays effective in an increasing breadth of applications. The Company must add additional value to its products and services for which customers are willing to pay. These areas could be outside of the Company’s historical business experience and it may not be successful at executing in such areas in the future. Failure to do so could adversely affect the Company’s revenue levels and its results of operations.

Shortages of components and materials may delay or reduce the Company’s sales and increase its costs.

The inability to obtain sufficient quantities of components and other materials necessary to produce the Company’s displays could result in reduced or delayed sales. The Company obtains much of the material it uses in the manufacture of its products from a limited number of suppliers, and it generally does not have long-term supply contracts with vendors. For some of this material the Company does not generally have a guaranteed alternative source of supply. In addition, given the Company’s cash management practices, vendors may not be willing to continue to ship materials on credit terms that are acceptable to the Company, or may impose lower than optimal credit lines for the Company. As a result, the Company is subject to cost fluctuations, supply interruptions and difficulties in obtaining materials. The Company has in the past and may in the future face difficulties ensuring an adequate supply of various display components such as quality high resolution glass used in its products. In the future the Company may also face difficulties ensuring an adequate supply of the rear-projection screens used in certain video wall products. The Company is continually engaged in efforts to address this risk area. In another recent example of such supply risks, in fiscal 2010 the U.S. International Trade Commission issued an exclusion order banning the import of certain LCD panels incorporated by the Company in certain of its specialty display products. While this matter has since been settled, any future inability of the Company to import adequate supplies of such panels, or products including such panels, or other products or components, could have a material adverse effect on the Company’s business, financial condition, and results of operations. The Company is subject to vendor lead times that can vary considerably depending on capacity fluctuations and other manufacturing constraints of the Company’s vendors. These lead times can be significant when vendors operate with diminished capacity or experience other restrictions that limit their ability to produce products in a timely manner. For most of the Company’s products, vendor lead times significantly exceed its customers’ required delivery time causing the Company to order to forecast rather than order based on actual demand. Competition in the market continues to reduce the period of time customers will wait for product delivery. Ordering raw materials and building finished goods based on the Company’s forecast exposes the Company to numerous risks including its inability to service customer demand in an acceptable timeframe, holding excess and obsolete inventory or having unabsorbed manufacturing overhead.

In recent years, the Company has increased its reliance on Asian manufacturing companies for the manufacture of displays that it sells in all of the markets served by the Company. The Company also relies on certain other contract manufacturing operations in Asia, including those that produce circuit boards and other components, and those that manufacture and assemble certain of its products. Most of the display and contract manufacturers with which the Company does business are located in Asia, which has experienced several earthquakes, tsunamis, typhoons, and interruptions to power supplies which resulted in business interruptions. In particular, the March 2011 earthquake and tsunami in Japan have caused some of the Company’s vendors and some of the suppliers of the Company’s vendors to halt, delay or reduce production of displays, display components and other materials which are used in the Company’s products. This may result in the inability of these vendors to manufacture and deliver to the Company in a timely manner the displays and other components in the types and quantities it needs to satisfy customer demand for its products. Many of the Company’s components are obtained from single and sole sources and, if at all possible, finding suitable alternative sources of supply for displays and other components used in the Company’s products may be difficult and time consuming, and obtaining them in required quantities in a timely manner and at acceptable costs may not be possible at all. Any significant interruption in the supply of

 

19


Table of Contents

displays, components and contract manufacturing capacity necessary to produce and sell the Company’s products would have a material adverse effect on the Company’s business, financial condition and results of operations.

Additionally, constraints on the availability of certain natural resources used in the manufacturing process may impair manufacturers’ abilities to operate their facilities efficiently, which could result in longer lead times for components used in the Company’s products, disruptions to the Company’s sales, or an increase in the costs of these components. Further, there may be disruptions in transportation and logistics due to damaged infrastructure and concerns over radiation levels. This could result in potential disruption to the sales of the Company’s products and could increase the costs of transportation and shipping. The Company continues to monitor the situation in Japan and the effects on its operations.

The Company does not have long-term supply contracts with contract manufacturers on which it relies. If any of these manufacturers in Asia or elsewhere were to terminate its arrangements with the Company, make decisions to terminate production of these products, or become unable to provide these displays to the Company on a timely basis, the Company could be unable to sell its products until alternative manufacturing arrangements are made. Furthermore, there is no assurance that the Company would be able to establish replacement manufacturing or assembly relationships on acceptable terms, which could have a material adverse effect on the Company’s business, financial condition and results of operation.

The Company’s reliance on contract manufacturers involves certain risks, including, but not limited to:

 

   

lack of control over production capacity and delivery schedules;

 

   

unanticipated interruptions in transportation and logistics;

 

   

limited control over quality assurance, manufacturing yields and production costs;

 

   

potential termination by vendors of agreements to supply materials to the Company, which would necessitate the Company’s contracting of alternative suppliers, which may not be possible;

 

   

risks associated with international commerce, including unexpected changes in legal and regulatory requirements, foreign currency fluctuations and changes in duties and tariffs; and

 

   

trade policies and political and economic instability.

A significant slowdown in the demand for the products of certain of the Company’s customers would adversely affect its business.

In the Company’s Custom and Embedded market, the Company designs and manufactures display solutions that its customers incorporate into their products. As a result, the Company’s success partly depends upon the market acceptance of its customers’ products. Accordingly, the Company must identify industries that have significant growth potential and establish relationships with customers who are successful in those industries. Failure to identify potential growth opportunities or establish relationships with customers who are successful in those industries would adversely affect the Company’s business. Dependence on the success of products of the Company’s customers exposes the Company to a variety of risks, including, but not limited to, the following:

 

   

the Company’s ability to match its design and manufacturing capacity with customer demand and to maintain satisfactory delivery schedules;

 

   

customer order patterns, changes in order mix and the level and timing of orders that the Company can manufacture and ship in a quarter; and

 

   

the cyclical nature of the industries and markets served by the Company’s customers.

These risks could have a material adverse effect on the Company’s business, financial condition and results of operations.

The Company has aging information systems and the investment of dollars and management attention will be required over time to upgrade or replace such systems.

The Company maintains a variety of information systems in connection with the operation of its business, including an enterprise resource management system (“ERP system”) that is integral to the Company’s ability to accurately and efficiently maintain its books and records, record its materials purchase transactions, manufacturing activities, and product sale transactions, provide critical business information to management, and prepare its financial statements. Certain of these systems, principally including the ERP system, are comprised of aging computer hardware and versions of software that are no longer actively supported by the vendor. The age of these systems heightens the risk of unanticipated difficulties, costs, disruptions and other adverse impacts and dictates that the Company take action over time to upgrade and improve the existing systems and possibly replace them. Upgrading or replacing

 

20


Table of Contents

the ERP system will cause the Company to incur costs, expend significant management time and attention and otherwise burden the Company’s internal resources. Failure to successfully upgrade or replace the ERP system could damage the effectiveness of the Company’s business processes and controls and could adversely impact the Company’s ability to accurately and effectively forecast and manage sales demand, manage the Company’s supply chain, identify and implement actions that improve the Company’s operational effectiveness and margins, and report financial and management information on an accurate and timely basis.

Future viability of the Company’s manufacturing facility located in Espoo, Finland is based on continued demand for EL products.

The majority of the products manufactured at the Company’s facility located in Espoo, Finland are based on EL technology. If demand for EL technology-based products diminishes significantly in the future, it could become necessary to cease manufacturing operations at this facility, which would likely result in an impairment loss on the associated property, plant and equipment, and restructuring charges related to employee severance. While demand for EL products improved in fiscal 2010 as compared to 2009, future declines in demand could again result in unabsorbed manufacturing overhead, which could negatively impact the Company’s results of operations.

The Company faces risks associated with other operations outside the United States.

The Company’s manufacturing, sales and distribution operations in Europe and Asia create a number of logistical, systems and communications challenges. The Company’s international operations also expose the Company to various economic, political and other risks, including, but not limited to, the following:

 

   

management of a multi-national organization;

 

   

compliance with local laws and regulatory requirements as well as changes in those laws and requirements;

 

   

employment and severance issues;

 

   

overlap of tax issues;

 

   

tariffs and duties;

 

   

employee turnover or labor unrest;

 

   

lack of developed infrastructure;

 

   

difficulties protecting intellectual property;

 

   

difficulties repatriating funds without adverse tax effects;

 

   

risks associated with outbreaks of infectious diseases;

 

   

burdens and costs of compliance with a variety of foreign laws;

 

   

political or economic instability in certain parts of the world;

 

   

effects of doing business in currencies other than the Company’s functional currency;

 

   

effects of doing business in countries where the local currency is pegged to the currency of another country (For instance the exchange rate of the Chinese RMB to the U.S. Dollar is closely monitored by the Chinese government and there have been recent increases in the value of the RMB relative to the U.S. Dollar. The Company purchases a significant amount of goods from Chinese suppliers and, while those purchases are typically denominated in U.S. Dollars, increases in the RMB relative to the U.S. Dollar would tend to cause the cost of such goods to increase); and

 

   

effects of foreign currency fluctuations on overall financial results.

Changes in policies by the United States or foreign governments resulting in, among other things, increased duties, higher taxation, currency conversion limitations, restrictions on the transfer or repatriation of funds, limitations on imports or exports, changes in environmental standards or regulations, or the expropriation of private enterprises also could have a materially adverse effect. Any actions by the Company’s host countries to curtail or reverse policies that encourage foreign investment or foreign trade also could adversely affect its operating results. In addition, U.S. trade policies, such as “most favored nation” status and trade preferences for certain Asian nations, could affect the attractiveness of the Company’s services to its U.S. customers.

 

21


Table of Contents

Future financial results of Planar could be adversely affected by changes in currency exchange rates.

While the Company is for the most part naturally hedged due to approximately equal foreign denominated sales and expenses, the Company is exposed to certain risks relating to U.S. denominated assets primarily held in Europe. In the past the Company has managed this non-cash GAAP income statement risk by periodically entering into forward exchange contracts to mitigate the income statement impact of fluctuations in the Euro value of certain U.S. Dollar denominated assets and liabilities. Due to volatility in the foreign exchange market and the Company’s strategic shift to preserve cash the Company adjusted its hedging strategy and as of March 27, 2009 discontinued its previous practice of hedging foreign currency risk through forward exchange contracts. As a result the Company may experience non-cash GAAP income statement losses due to changes in the U.S. Dollar versus the Euro exchange rate.

The value of intangible assets may become impaired in the future.

The Company has intangible assets recorded on the balance sheet as a result of the acquisition of Clarity Visual Systems that relate primarily to developed technology, patents, and customer relationships. The initial value of intangible assets recorded at the time of acquisition represented the Company’s estimate of the net present value of future cash flows which can be derived from the intangible assets over time, and is amortized over the estimated useful life of the underlying assets. The remaining $2.2 million of the intangible assets will be amortized over the useful lives of the respective assets of approximately 1.8 years and could, in the future, experience additional impairment. The estimated undiscounted future cash flows of the intangible assets are evaluated on a regular basis, and if it becomes apparent that these estimates will not be met, a reduction in the value of intangible assets will be required, as occurred in fiscal 2008. A determination of impairment of intangible assets could result in a material charge to operations in a period in which an impairment loss is recognized, as occurred in fiscal 2008. While such a charge would not have an effect on the Company’s cash flows, it would impact the net income in the period it was recognized.

Future indebtedness could reduce the Company’s ability to use cash flow for purposes other than debt service or otherwise restrict the Company’s activities.

The Company’s amended and restated credit agreement, as amended on November 18, 2010, has a maximum borrowing capacity of $12 million and expires on December 1, 2011. As of April 1, 2011 there were no amounts outstanding under this credit agreement. If the Company incurred a significant amount of debt, the leverage would reduce the Company’s ability to use cash flow to fund working capital, capital expenditures, development projects, acquisitions, and other general corporate purposes. High leverage would also limit flexibility in planning for, or reacting to, changes in business and increases vulnerability to a downturn in the business and general adverse economic and industry conditions. Substantially all of the assets of the Company are pledged as security under its credit agreement, which includes certain financial covenants, as discussed in Note 7 — Borrowings in the Notes to the Consolidated Financial Statements in this Report. The Company may not generate sufficient profitability to meet these covenants. Failure by the Company to comply with applicable covenants, or to obtain waivers therefrom, would result in an event of default, and could result in the Company being unable to borrow amounts under the agreement, or could result in the acceleration of any amounts outstanding at that time, which, in turn could lead to the Company’s inability to pay its debts and the loss of control of its assets. In addition, the current credit agreement expires on December 1, 2011. If the Company were unable to renew or extend this agreement, the Company may need to pursue other sources of financing. Other sources of credit may not be available at all and, even if such credit is available, it may only be available on terms (including the cost of borrowing) that are unattractive to the Company. If credit is not available to fully satisfy the Company’s liquidity needs, the Company may need to dispose of additional assets. In addition, the Company’s position on indefinite reinvestment of unremitted earnings from foreign operations may limit its ability to transfer cash between or across foreign and U.S. operations as may be required.

The Company may experience losses selling certain desktop monitor other consumer based, lower margin products.

The market for the Company’s desktop monitor products is highly competitive and subject to rapid changes in prices and demand. The Company’s failure to successfully manage inventory levels or quickly respond to changes in pricing, technology or consumer tastes and demand could result in lower than expected revenue, lower gross margin and excess, obsolete and devalued inventories of its desktop monitor products which could adversely affect the Company’s business, financial condition and results of operations. Market conditions were characterized by rapid declines in end user pricing during portions of 2005, 2006, 2007, and 2008. Such declines caused the Company’s inventory to lose value and triggered price protection obligations for channel inventory. Supply and pricing of LCD panels has been volatile in the past and may be in the future. This volatility, combined with lead times of five to eight weeks, may cause the Company to pay too much for products or suffer inadequate product supply.

The Company does not have long-term agreements with its resellers, who generally may terminate their relationship with the Company with little or no notice. Such action by the Company’s resellers could substantially harm the Company’s operating results. Revenue could decrease due to reductions in demand, competition, alternative products, pricing changes in the marketplace and potential shortages of products which would adversely affect the Company’s revenue levels and its results of operations. In addition,

 

22


Table of Contents

strategic changes made by the Company’s management to invest greater resources in specialty display markets could result in reduced revenue from desktop monitors.

The disposal or elimination of a product line could result in unabsorbed overhead costs that must be absorbed by the Company’s remaining product lines.

In the fourth quarter of fiscal 2008 the Company disposed of its subsidiary that sold products to the medical market and in the second quarter of 2009 the Company sold its digital signage software assets. If the Company were to discontinue or substantially reduce its efforts to sell its products to any of its targeted end-markets, or to discontinue certain product lines, for the purpose of reducing costs or losses or otherwise, it may not be possible to eliminate all associated fixed overhead costs which would have to be absorbed by the revenues generated by selling its other products to the remaining targeted end-markets. This could potentially adversely affect the Company’s overall financial performance in the future.

Variability of customer requirements or losses of key customers may adversely affect the Company’s operating results.

The Company must provide increasingly rapid product turnaround and respond to ever-shorter lead times, while at the same time meet its customers’ product specifications and quality expectations. A variety of conditions, including bankruptcy and other conditions both specific to individual customers and generally affecting the demand for their products, may cause customers to cancel, reduce, or delay orders. These actions by a significant customer or by a set of customers could adversely affect the Company’s business. On occasion, customers require rapid increases in production, which can strain the Company’s resources and reduce margins. The Company may lack sufficient capacity at any given time to meet customers’ demands. Products sold to one customer represented 11% of total consolidated sales in fiscal 2008. Sales to this customer were less than 10% in fiscal 2009 and 2010. Sales to this customer, if lost, could have a material, adverse impact on the results of operations. If accounts receivable from a significant customer or set of customers became uncollectible, a resulting charge could have a material adverse effect on operations, although the Company does maintain allowances for estimated losses resulting from the inability of its customers to make required payments.

The Company may lose key licensors, sales representatives, foundries, licensees, vendors, other business partners and employees due to uncertainties regarding the future results of Planar or the worldwide economic condition, which could seriously harm Planar.

Sales representatives, vendors, resellers, distributors, and others doing business with the Company may experience uncertainty about their future role with the Company, may elect not to continue doing business with Planar, may seek to modify the terms under which they do business in ways that are less attractive, more costly, or otherwise damaging to the business of Planar, or may declare bankruptcy or otherwise cease operations. Loss of relationships with these business partners could adversely affect Planar’s business, financial condition, and results of operations. Similarly, the Company’s employees may experience uncertainty about their future role with the Company to the extent that its operations are unsuccessful or its strategies are changed significantly. This may adversely affect Planar’s ability to attract and retain key management, marketing and technical personnel. The loss of a significant group of key technical personnel would seriously harm the product development efforts of Planar. The loss of key sales personnel could cause the Company to lose relationships with existing customers, which could cause a decline in the sales of the Company’s products.

The Company does not have long-term purchase commitments from its customers.

The Company’s business is generally characterized by short-term purchase orders and contracts which do not require that purchases be made. The Company typically plans its production and inventory levels based on internal forecasts of customer demand which rely in part on nonbinding forecasts provided by its customers. As a result, the Company’s backlog generally does not exceed three months, which makes forecasting its sales difficult. Inaccuracies in the Company’s forecast as a result of changes in customer demand or otherwise may result in its inability to service customer demand in an acceptable timeframe, the Company holding excess and obsolete inventory, or having unabsorbed manufacturing overhead. The failure to obtain anticipated orders and deferrals or cancellations of purchase commitments because of changes in customer requirements, or otherwise, could have a material adverse effect on the Company’s business, financial condition and results of operations. The Company has experienced such problems in the past and may experience such problems in the future.

Economic or industry factors could result in portions of the Company’s inventory becoming obsolete or in excess of anticipated usage.

The Company is exposed to a number of economic and industry factors that could result in write-offs of inventory. These factors include, but are not limited to, technological and regulatory changes in the Company’s markets, the Company’s ability to meet changing customer requirements, competitive pressures in products and prices, forecasting errors, new product introductions, quality issues with key suppliers, product phase-outs, future customer service and repair requirements, and the availability of key components from the Company’s suppliers. Additionally, while the Company does not generally enter into long-term purchasing commitments with its suppliers, there are certain suppliers of high-end home products with which the Company has long-term purchasing commitments. These commitments could require the Company to purchase inventory it considers obsolete.

 

23


Table of Contents

The Company must protect its intellectual property, and others could infringe on or misappropriate its rights.

The Company believes that its continued success partly depends on protecting its proprietary technology. The Company relies on a combination of patent, trade secret, copyright and trademark laws, confidentiality procedures and contractual provisions to protect its intellectual property. The Company seeks to protect some of its technology under trade secret laws, which afford only limited protection. The Company faces risks associated with its intellectual property, including, but not limited to, the following:

 

   

pending patent and copyright applications may not be issued;

 

   

patent and copyright applications are filed only in a limited number of countries;

 

   

intellectual property laws may not protect the Company’s intellectual property rights;

 

   

others may challenge, invalidate, or circumvent any patent or copyright issued to the Company;

 

   

rights granted under patents or copyrights issued to the Company may not provide competitive advantages to the Company;

 

   

unauthorized parties may attempt to obtain and use information that the Company regards as proprietary despite its efforts to protect its proprietary rights; and

 

   

others may independently develop similar technology or design around any patents issued to the Company.

The Company may find it necessary to take legal action in the future to enforce or protect its intellectual property rights or to defend against claims of infringement. Litigation can be very expensive and can distract management’s time and attention, which could adversely affect the Company’s business. In addition, the Company may not be able to obtain a favorable outcome in any intellectual property litigation. Others could claim that the Company is infringing their patents or other intellectual property rights. In the event of an allegation that the Company is infringing on another’s rights, it may not be able to obtain licenses on commercially reasonable terms from that party, if at all, or that party may commence litigation against the Company. The failure to obtain necessary licenses or other rights or the institution of litigation arising out of such claims could materially and adversely affect the Company’s business, financial condition and results of operations. For instance, a technology licensing company has recently asserted that various of the Company’s products require a license under certain patents held by such party. In addition, the Company has been made party to two lawsuits (among many other defendants); in one case alleging infringement of a United States patent relating to stands for multiple displays, which the Company has tendered to its supplier for defense and indemnification. In the other case the lawsuit alleges that the Company’s Indisys image processing products infringe upon a United States patent held by a third party. The Company will vigorously defend itself against the assertion of any liability. While the Company would, in each instance, seek indemnification from the manufacturer of such products if it were found to be liable, a determination of liability against the Company could have an adverse impact on the Company’s business, financial condition, and results of operations.

The market price of the Company’s common stock may be volatile.

The market price of the Company’s common stock has been subject to wide fluctuations. During the Company’s four most recently completed fiscal quarters, the closing price of the Company’s stock ranged from $1.60 to $3.62. The market price of the Company’s common stock in the future is likely to continue to be subject to wide fluctuations in response to various factors, including, but not limited to, the following:

 

   

variations in the Company’s operating results and financial condition;

 

   

public announcements by the Company as to its expectations of future sales and net income or loss;

 

   

actual or anticipated announcements of technical innovations or new product developments by the Company or its competitors;

 

   

changes in analysts’ estimates of the Company’s financial performance;

 

   

general conditions in the electronics industry; and

 

   

worldwide economic and financial conditions.

In addition, the public stock markets have experienced extreme price and volume fluctuations that have particularly affected the market prices for many technology companies and that often have been unrelated to the operating performance of these companies. These broad market fluctuations and other factors may continue to adversely affect the market price of the Company’s common stock.

The Company faces risks in connection with potential acquisitions.

 

24


Table of Contents

The Company has made several acquisitions during its history. Not all of these acquisitions have been successful. It is possible that the Company will make additional acquisitions in the future. The Company’s ability to effectively integrate any future acquisitions will depend on, among other things, the adequacy of its implementation plans, the ability of management to oversee and effectively operate the combined operations and the Company’s ability to achieve desired operational efficiencies. The integration of businesses, personnel, product lines and technologies is often difficult, time consuming and subject to significant risks. For example, the Company could lose key personnel from companies that it acquires, incur unanticipated costs, lose major sources of revenue, fail to integrate critical technologies, suffer business disruptions, fail to capture anticipated synergies, or fail to establish satisfactory internal controls. Any of these difficulties could disrupt the Company’s ongoing business, distract management and employees, increase expenses and decrease revenues. Furthermore, the Company might assume or incur additional debt or issue additional equity securities to pay for future acquisitions. Additional debt may negatively impact the Company’s financial results and increase its financial risk, and the issuance of any additional equity securities could dilute the Company’s then existing shareholders’ ownership. In addition, in connection with any future acquisitions, the Company could:

 

   

incur amortization expense related to intangible assets;

 

   

uncover previously unknown liabilities; or

 

   

incur large and immediate write-offs that would reduce net income.

Acquisitions are inherently risky, and any acquisition may not be successful. If the Company is unable to successfully integrate the operations of any businesses that it may acquire in the future, its business, financial position, results of operations or cash flows could be materially adversely affected.

Changes in internal controls or accounting guidance could cause volatility in the Company’s stock price.

The Company’s internal controls over financial reporting are not currently required to be audited by its independent registered public accounting firm in accordance with Section 404 of the Sarbanes-Oxley Act of 2002 (“Section 404”). If, in future periods, the Company’s internal controls over financial reporting are required to be audited by its independent registered public accounting firm significant additional expenditures could be incurred which could adversely impact the Company’s results of operations. Additionally, an audit by the independent public accounting firm could identify a material weakness which would result in the Company receiving an adverse opinion on its internal controls over financial reporting from its independent registered public accounting firm. This could result in additional expenditures responding to the Section 404 internal control audit, heightened regulatory scrutiny and potentially an adverse effect to the price of the Company’s stock.

The Company must maintain satisfactory manufacturing yields and capacity.

An inability to maintain sufficient levels of productivity or to satisfy delivery schedules at the Company’s manufacturing facilities would adversely affect its operating results. The design and manufacture of the Company’s EL displays involves highly complex processes that are sensitive to a wide variety of factors, including the level of contaminants in the manufacturing environment, impurities in the materials used and the performance of personnel and equipment. At times the Company has experienced lower-than-anticipated manufacturing yields and lengthened delivery schedules and may experience such problems again in the future, particularly with respect to new products or technologies. Any such problems could have a material adverse effect on the Company’s business, financial condition and results of operations.

The Company cannot provide any assurance that current environmental laws and product quality specification standards, or any laws or standards enacted in the future, will not have a material adverse effect on its business.

The Company’s operations are subject to environmental and various other regulations in each of the jurisdictions in which it conducts business. Some of the Company’s products use substances, such as lead, that are highly regulated or will not be allowed in certain jurisdictions in the future. The Company has redesigned certain products to eliminate such substances in its products. In addition, regulations have been enacted in certain jurisdictions which impose restrictions on waste disposal of electronic products and electronics recycling obligations. If the Company fails to comply with applicable rules and regulations in connection with the use and disposal of such substances or other environmental or recycling legislation, it could be subject to significant liability or loss of future sales.

EL products are manufactured at a single location, with no currently available substitute location.

The Company’s EL products, which are based on proprietary technology, are produced in its manufacturing facility located in Espoo, Finland. Because the EL technology and manufacturing process is proprietary and unique, there exists no alternative location where it may be produced, either by the Company, or by another manufacturer. As such, loss of or damage to the manufacturing facility, or attrition in the facility’s skilled workforce, could cause a disruption in the manufacturing of the EL products, which compose a

 

25


Table of Contents

significant portion of the Company’s sales. Additionally, there are many fixed costs associated with such a manufacturing facility. If revenue levels were to decrease or other problems were encountered, this could have a material, adverse effect on the Company’s business, financial condition, and results of operations.

 

26


Table of Contents
Item 6. Exhibits

 

(a)

 

10.1 Form for Restricted Stock Agreement between Planar Systems, Inc. and J. Michael Gullard, Carl W. Neun, E. Kay Stepp, Gregory H. Turnbull, and Steven E. Wynne dated as of February 17, 2011*

 

31.1 Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

31.2 Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002

 

32.1 Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

32.2 Certification Pursuant to 18 U.S.C. Section 1350, as adopted pursuant to Section 906 of the Sarbanes-Oxley Act of 2002

 

* This exhibit constitutes a management contract or compensatory plan or arrangement

 

27


Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

   

PLANAR SYSTEMS, INC.

(Registrant)

DATE: May 6, 2011     /s/    Scott Hildebrandt        
    Scott Hildebrandt
    Vice President and Chief Financial Officer

 

28