UNITED STATES
SECURITIES AND EXCHANGE COMMISSION

WASHINGTON, D.C. 20549

FORM 10-K

x      ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2010

OR

o         TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from                          to                         

Commission file number:  001-12648

UFP Technologies, Inc.

 (Exact name of registrant as specified in its charter)

(978) 352-2200

(Registrant’s telephone number, including area code)

Securities registered pursuant to Section 12(b) of the Act:

Securities registered pursuant to Section 12(g) of the Act:   None

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o  No x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Exchange Act.  Yes o  No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x  No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate website, if any, every interactive data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).  Yes o  No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o  No x

As of June 30, 2010, the aggregate market value of the registrant’s common stock held by non-affiliates of the registrant was $39,156,840, based on the closing price of $9.18 on that date as reported on the NASDAQ Capital Market.

As of March 2, 2011, there were 6,382,060 shares of common stock, $0.01 par value per share, of the registrant outstanding.

DOCUMENTS INCORPORATED BY REFERENCE

PART I

SPECIAL NOTE REGARDING FORWARD-LOOKING STATEMENTS

Some of the statements contained in this Report are forward-looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934 (Exchange Act). These statements involve known and unknown risks, uncertainties, and other factors, which may cause our or our industry’s actual results, performance, or achievements to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Forward-looking statements include, but are not limited to, statements about our prospects, anticipated advantages we expect to realize from our acquisition strategies, our participation and growth in multiple markets, our business opportunities, our growth potential and strategies for growth, and any indication that we may be able to sustain or increase our sales and earnings, or our sales and earnings growth rates. Investors are cautioned that such forward-looking statements involve risks and uncertainties, including without limitation, risks associated with the identification of suitable acquisition candidates and the successful, efficient execution of acquisition transactions and integration of any such acquisition candidates.

In some cases, you can identify forward-looking statements by terms such as “may,” “will,” “should,” “could,” “would,” “expects,” “plans,” “anticipates,” “believes,” “estimates,” “projects,” “predicts,” “potential,” and similar expressions intended to identify forward-looking statements. Our actual results could be different from the results described in or anticipated by our forward-looking statements due to the inherent uncertainty of estimates, forecasts, and projections, and may be materially better or worse than anticipated. Given these uncertainties, you should not place undue reliance on these forward-looking statements. Forward-looking statements represent our estimates and assumptions only as of the date of this Report. We expressly disclaim any duty to provide updates to forward-looking statements, and the estimates and assumptions associated with them, after the date of this Report, in order to reflect changes in circumstances or expectations, or the occurrence of unanticipated events, except to the extent required by applicable securities laws. All of the forward-looking statements are qualified in their entirety by reference to the factors discussed above and under “Risk Factors” set forth in Part I Item 1A of this Report, as well as the risks and uncertainties discussed elsewhere in this Report. We qualify all of our forward-looking statements by these cautionary statements. We caution you that these risks are not exhaustive. We operate in a continually changing business environment and new risks emerge from time to time.

ITEM 1.              BUSINESS

The Company designs and manufactures engineered packaging solutions utilizing molded and fabricated foams, vacuum-formed plastics, and molded fiber. The Company also designs and manufactures engineered component products using laminating, molding, and fabricating technologies. The Company serves a myriad of manufacturing sectors, but specifically targets opportunities in the medical and scientific, automotive, aerospace and defense, computer and electronics, industrial, and consumer markets.

The Company’s high-performance packaging solutions are made primarily from polyethylene and polyurethane foams, and a wide range of sheet plastics. These solutions are custom-designed and fabricated or molded to provide protection for fragile and valuable items, and are sold primarily to original equipment and component manufacturers. Molded fiber products are made primarily from 100% recycled paper principally derived from waste newspaper. These products are custom-

2

designed, engineered and molded into shapes for packaging high-volume consumer goods, including computer components, light electronics, candles, and health and beauty products.

In addition to packaging solutions, the Company fabricates and molds component products made from cross-linked polyethylene foams, reticulated polyurethane foams, and other specialty materials. The Company also laminates fabrics and other materials to cross-linked polyethylene foams, polyurethane foams, and other substrates. The Company’s component products include automotive interior trim, athletic padding, industrial safety belts, medical device components, air filtration, high-temperature insulation, abrasive nail files and other beauty aids, anti-fatigue mats, and shock-absorbing inserts used in athletic and leisure footwear.

The consolidated financial statements include the accounts and results of operations of UFP Technologies, Inc., its wholly-owned subsidiaries, Moulded Fibre Technology, Inc., Simco Industries, Inc. and its wholly-owned subsidiary Simco Automotive Trim, Inc., and Stephenson & Lawyer, Inc. and its wholly-owned subsidiary, Patterson Properties Corporation. The Company also consolidates United Development Company Limited (“UDT”), of which the Company owns 26.32% (see Note 8). Unless context otherwise requires, the term “Company” refers to UFP Technologies, Inc. and its consolidated subsidiaries. All significant inter-company balances and transactions have been eliminated in consolidation.

Wine Packs®, T-Tubes®, BioShell®, and Pro-Sticks® are our U.S. registered trademarks. Each trademark, trade name, or service mark of any other company appearing in this Report belongs to its respective holder.

Our principal executive offices are located at 172 East Main Street, Georgetown, Massachusetts 01833; telephone number 978-352-2200; corporate website www.ufpt.com. We make available through our website our annual report on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to these reports filed or furnished pursuant to Section 13(a) of the Securities Exchange Act of 1934, as soon as practicable after we electronically file such material with, or furnish it to, the Securities and Exchange Commission. The information found on our website is not part of this or any other report we file with or furnish to the SEC.

Market Overview

Packaging

The interior cushion packaging market is characterized by three primary sectors: (1) custom fabricated or molded products for low-volume, high-fragility products; (2) molded or die-cut products for high-volume, industrial and consumer goods; and (3) loose fill and commodity packaging materials for products that do not require custom-designed packaging. Packaging solutions are used to contain, display, and/or protect their contents during shipment, handling, storage, marketing, and use. The Company serves both the low-volume, high-fragility market and the high-volume industrial and consumer market, with a range of materials and manufacturing capabilities, but does not materially serve the commodity packaging market.

The low-volume, high-fragility market is generally characterized by annual production volumes of less than 50,000 pieces. Typical goods in this market include precision instruments, medical devices, sensitive electronic components, and other high-value industrial products that are very sensitive to shock, vibration, and other damage that may occur during shipment and distribution. The principal

3

materials used to package these goods include polyethylene and polyurethane foams, foam-in-place polyurethane, and molded expanded polystyrene. Polyurethane and polyethylene foams have high shock absorbency, high resiliency, and vibration-damping characteristics.

The higher-volume consumer packaging market is generally characterized by annual production volumes in excess of 50,000 pieces. Typical goods in this market include toys, light electronics, computers and computer peripherals, stereo equipment, and small appliances. These goods generally do not require as high a level of shock and vibration protection as goods in the low-volume, high-fragility market. The principal materials used to package these goods include various molded, rigid, and foamed plastics, such as expanded polystyrene foam (EPS), vacuum-formed polystyrene (PS) and polyvinyl chloride (PVC), and corrugated die-cut inserts that generally are less protective and less expensive than resilient foams and molded fiber.

Component Products

Component Products’ applications of foam and other types of plastics are numerous and diverse. Examples include automotive interior components, medical devices, toys, gaskets, health and beauty products, and carrying cases. Cross-linked polyethylene foams have many of the same properties as traditional polyethylene foams, including lightweight, durability, resiliency, and flexibility. Cross-linked foams have many advantages over traditional foams, including the ability to be thermoformed (molded), availability in vibrant colors, a fine cell structure providing improved esthetics and lower abrasiveness, and enhanced resistance to chemicals and ultraviolet light. Certain grades of cross-linked foams can be radiation-sterilized and have been approved by the U.S. Food and Drug Administration for open wound skin contact.

Cross-linked foam can be combined with other materials to increase product applications and market applications. For example, cross-linked foams can be laminated to fabrics to produce lightweight, flexible, and durable insoles for athletic and walking shoes, weight lifting and industrial safety belts, gun holsters, backpacks, and other products for the leisure, athletic, and retail markets. The Company believes that, as a result of their many advantages, cross-linked foam and cross-linked foam laminated products are being used in a wide range of markets as substitutes for traditional rubber, leather, and other product material alternatives.

Reticulated polyurethane foam is a versatile material typically used to make component products that involve filtration, liquid absorption, noise control, wiping, and padding. These foams feature high tensile, elongation, and tear characteristics; they are used extensively in the medical industry as they are easy to clean, impervious to microbial organisms, and can be made with fungicidal and bactericidal additives for added safety.

Regulatory Climate

The packaging industry has been subject to user, industry, and legislative pressure to develop environmentally-responsible packaging alternatives that reduce, reuse, and recycle packaging materials. Government authorities have enacted legislation relating to source reduction, specific product bans, recycled content, recyclability requirements, and “green marketing” restrictions.

In order to provide packaging that complies with all regulations regardless of a product’s destination, manufacturers seek packaging materials that meet both environmentally-related demands and performance specifications. Some packaging manufacturers have responded by reducing product

4

volume and ultimate waste product disposal through reengineering traditional packaging solutions; adopting new manufacturing processes; participating in recovery and reuse systems for resilient materials that are inherently reusable; creating programs to recycle packaging following its useful life; and developing materials that use a high percentage of recycled content in their manufacture. Wherever feasible, the Company employs one or more of these techniques to create environmentally-responsible packaging solutions.

Products

The Company’s products include foam, plastic, and fiber packaging solutions, and component products.

Packaging Solutions

The Company designs, manufactures, and markets a broad range of packaging solutions primarily using polyethylene, polyurethane, cross-linked polyethylene foams, and rigid plastics. These solutions are custom-designed and fabricated or molded to provide protection for less durable, higher-value items, and are primarily sold to original equipment and component manufacturers. Examples of the Company’s packaging solutions include end-cap packs for computers, corner blocks for telecommunications consoles, anti-static foam packs for printed circuit boards, die-cut or routed inserts for cases, molded foam enclosures for orthopedic products, and plastic trays for medical devices and components. Markets for these products are typically characterized by lower to moderate volumes where performance, such as shock absorbency and vibration damping, is valued.

The Company’s engineering personnel collaborate directly with customers to study and evaluate specific customer requirements. Based on the results of this evaluation, packaging solutions are engineered to customer specifications, using various types and densities of materials with the goal of providing the desired protection for the lowest cost and with the lowest physical package volume. The Company believes its engineering expertise, breadth of material offerings, and manufacturing capabilities have enabled it to provide unique solutions to achieve these goals.

The markets for the Company’s molded fiber packaging and vacuum-formed trays are characterized by high-volume production runs and require rapid manufacturing turnaround times. Raw materials used in the manufacture of molded fiber are primarily recycled newspaper, and a variety of other grades of recycled paper and water. Raw materials used in vacuum-formed plastics include polystyrene (PS) and polyvinyl chloride (PVC). These products compete with expanded polystyrene (EPS) and manually assembled corrugated die-cut inserts.

The Company’s molded fiber products provide customers with packaging solutions that are more responsive to stringent environmental packaging regulations worldwide and meet the demands of environmentally-aware consumers, while simultaneously meeting customer cost and performance objectives.

Component Products

The Company specializes in engineered products that use the Company’s close tolerance manufacturing capabilities, its expertise in various foam materials and lamination techniques, and its ability to manufacture in clean room environments. The Company’s component products are sold primarily to customers in the automotive, sporting goods, medical, beauty, leisure, and footwear

5

industries. These products include automotive interior trim, athletic and industrial safety belts, components for medical equipment and devices, cosmetic applicators, air conditioner filters, abrasive nail files and other beauty aids, anti-fatigue mats, and shock-absorbing inserts used in athletic and leisure footwear.

The Company believes it is one of the largest purchasers of cross-linked foam in the United States and as a result it has been able to establish important relationships with the relatively small number of suppliers of this product. Through its strong relationships with cross-linked foam suppliers, the Company believes it is able to offer customers a wide range of cross-linked foam products.

The Company benefits from its ability to custom-design its own proprietary manufacturing equipment in conjunction with its machinery suppliers. For example, the Company has custom-designed its own lamination machines, allowing it to achieve adhesive bonds between cross-linked foam and fabric and other materials that do not easily combine. These specialty laminates typically command higher prices than traditional foam products.

The Company has developed a variety of standard products that are branded and, in some cases, trademarked and patented. These products include Wine Packs® (wine shipping solutions made from molded fiber); T-Tubes® (tube and pipe insulation for clean room environments); BioShell® (pharmaceutical bag protection system); and Pro-Sticks® (sanitary solution for nail care services).

Marketing and Sales

The Company goes to market through three major brands: United Foam, Simco Automotive, and Molded Fiber. Each brand represents specific materials, capabilities, and services the Company offers. The Company markets its brands through websites, online advertising and directories, press releases, and trade shows and expositions.

The Company markets and sells its packaging and component products in the United States principally through direct regional sales forces comprised of skilled engineers. The Company also uses independent manufacturer representatives to sell its products. The Company’s sales engineers collaborate with customers and in-house design and manufacturing experts to develop custom-engineered solutions on a cost-effective basis. The Company markets a line of products to the health and beauty industry, primarily through distributors. The Company believes its sales are somewhat seasonal, with increased sales in the second and fourth quarters.

The top customer in the Company’s Component Products segment, Recticel Interiors North America, comprised 13.9% of that segment’s total sales and 9.3% of the Company’s total sales for the year ended December 31, 2010. No one customer’s sales exceeded 10% of the Packaging segment sales for the year ended December 31, 2010. The loss of Recticel as a customer could have a material adverse effect on the Company.

Manufacturing

The Company’s manufacturing operations consist primarily of cutting, molding, vacuum-forming, laminating, and assembling. For custom-molded foam products, the Company’s skilled engineering personnel analyze specific customer requirements to design and build prototype products to determine product functionality. Upon customer approval, prototypes are converted to final designs

6

for commercial production runs. Molded cross-linked foam products are produced in a thermoforming process using heat, pressure, and precision metal tooling.

Cushion foam packaging products that do not utilize cross-linked foam are fabricated by cutting shapes from blocks of foam, using specialized cutting tools, routers, water jets, and hot wire equipment, and assembling these shapes into the final product using a variety of foam welding or gluing techniques. Products can be used on a stand-alone basis or bonded to another foam product or other material such as a corrugated medium.

Laminated products are produced through a process whereby the foam medium is heated to the melting point. The heated foam is then typically bonded to a non-foam material through the application of mechanical pressure.

Molded fiber products are manufactured by vacuum-forming a pulp of recycled or virgin paper materials onto custom-engineered molds. With the application of vacuum and air, the molded parts are pressed and transferred to an in-line conveyorized dryer, from which they exit ready for packing or subsequent value-added operations.

The Company does not manufacture any of the raw materials used in its products. With the exception of certain grades of cross-linked foam and technical polyurethane foams, these raw materials are available from multiple supply sources. Although the Company relies upon a limited number of suppliers for cross-linked foam, the Company’s relationships with such suppliers are good, and the Company expects that these suppliers will be able to meet its requirements for cross-linked foam. Any delay or interruption in the supply of raw materials could have a material adverse effect on the Company’s business.

Research and Development

The Company’s engineering personnel continuously explore design and manufacturing techniques, as well as new innovative materials to meet the unique demands and specifications of its customers. Because the Company’s products tend to have relatively short life cycles, research and development is an integral part of the Company’s ongoing cost structure.

Competition

The packaging industry is highly competitive. While there are several national companies that sell interior packaging, the Company’s primary competition for its packaging products has been from smaller independent regional manufacturing companies. These companies generally market their products in specific geographic areas from neighboring facilities. In addition, the Company’s foam and fiber packaging products compete against products made from alternative materials, including expanded polystyrene foams, die-cut corrugated, plastic peanuts, plastic bubbles, and foam-in-place urethane.

The component products industry is also highly competitive. The Company’s component products face competition primarily from smaller companies that typically concentrate on production of component products for specific industries. The Company believes its access to a wide variety of materials, its engineering expertise, its ability to combine foams with other materials such as plastics and laminates, and its ability to manufacture products in a clean room environment, will enable it to continue to compete effectively in the engineered component products market. The Company’s

7

component products also compete with products made from a wide range of other materials, including rubber, leather and other foams.

The Company believes its customers typically select vendors based on price, product performance, product reliability, and customer service. The Company believes it is able to compete effectively with respect to these factors in each of its targeted markets.

Patents and Other Proprietary Rights

The Company relies upon trade secrets, patents, and trademarks to protect its technology and proprietary rights. The Company believes the improvement of existing products, reliance upon trade secrets and unpatented proprietary know-how, and the development of new products are generally as important as patent protection in establishing and maintaining a competitive advantage. Nevertheless, the Company has obtained patents and may continue to make efforts to obtain patents, when available, although there can be no assurance that any patent obtained will provide substantial protection or be of commercial benefit to the Company, or that its validity will be upheld if challenged.

The Company has four U.S. patents relating to its molded fiber technology (including certain proprietary machine designs), and has patents with respect to such technology in certain foreign countries. The Company also has a total of twelve U.S. patents relating to technologies including foam and packaging, automotive trim, tool control, patterned nail file, and superforming process technologies, as well as patents with respect to such technologies in certain foreign countries. The Company also has some patent applications in process. There can be no assurance that any patent or patent application will provide significant protection for the Company’s products and technology, or will not be challenged or circumvented by others. The expiration dates for the Company’s U.S. patents range from 2012 through 2024.

Environmental Considerations

In addition to offering molded fiber packaging products made from recycled paper derived primarily from post-consumer newspaper waste, the Company actively promotes its philosophy of reducing product volume and resulting post-user product waste. The Company designs products to provide optimum performance with minimum material. In addition, the Company participates in a recovery and reuse program for certain of its plastic packaging products. The Company is aware of public support for environmentally-responsible packaging and other products. Future government action may impose restrictions affecting the industry in which the Company operates. There can be no assurance that any such action will not adversely impact the Company’s products and business.

Backlog

The Company’s backlog, as of February 12, 2011, and February 15, 2010, totaled approximately $9.6 million and $10.1 million, respectively, for the Packaging segment, and $17.7 million and $15.5 million, respectively, for the Component Products segment. The backlog consists of purchase orders for which a delivery schedule within the next twelve months has been specified by customers. Orders included in the backlog may be canceled or rescheduled by customers without significant penalty. The backlog as of any particular date should not be relied upon as indicative of the Company’s revenues for any period.

8

Employees

As of January 30, 2011, the Company had a total of 609 full-time employees (as compared to 603 full-time employees as of January 31, 2010), with 358 full-time employees in the Component Products segment (37 in engineering, 265 in manufacturing operations, 26 in marketing, sales, and support services, and 30 in general and administration) and 251 full-time employees in the Packaging segment (29 in engineering, 187 in manufacturing, 17 in marketing, sales and support services, and 18 in general and administration). The Company is not a party to any collective bargaining agreement. The Company considers its employee relations to be good.

ITEM 1A.          RISK FACTORS

You should carefully consider the risks described below and the other information in this report before deciding to invest in shares of our common stock. These are the risks and uncertainties we believe are most important for you to consider. Additional risks and uncertainties not presently known to us, which we currently deem immaterial or which are similar to those faced by other companies in our industry or business in general, may also impair our business operations. If any of the following risks or uncertainties actually occurs, our business, financial condition and operating results would likely suffer. In that event, the market price of our common stock could decline and you could lose all or part of your investment.

We depend on a small number of customers for a large percentage of our revenues. The loss of any single customer, a reduction in sales to any such customer, or the decline in the financial condition of any such customer could have a material adverse effect on our business, financial condition, and results of operations.

A limited number of customers typically represent a significant percentage of our revenues in any given year. Our top ten customers represent approximately 31% and 32.1% of our total revenues in 2010 and 2009, respectively. A single automotive program accounted for approximately 13.9% and 13.0%, respectively, of our Component Products segment sales and approximately 9.3% and 8.0% of our total sales in 2010 and 2009, respectively. The program is scheduled to phase out beginning in the third quarter of 2011, although it is uncertain at this time whether the phase-out will occur as scheduled. Assuming the phase-out occurs as scheduled, we expect sales from this program to decline over the next three years. Our revenues are directly dependent on the ability of our customers to develop, market, and sell their products in a timely, cost-effective manner. The loss of a significant portion of our expected future sales to any of our large customers would have a material adverse effect on our business, financial condition, and financial results. Likewise, a material adverse change in the financial condition of any of these customers could have a material adverse effect on our ability to collect accounts receivable from any such customer.

We may pursue acquisitions or joint ventures that involve inherent risks, any of which may cause us to not realize anticipated benefits.

Our business strategy includes the potential acquisition of businesses and entering into joint ventures and other business combinations that we expect will complement and expand our business. For example, during 2009 we acquired selected assets of Foamade Industries, Inc., E.N. Murray Co., and Advanced Materials, Inc. as discussed in Note 19 of the “Notes to Consolidated Financial Statements.” We may not be able to successfully identify suitable acquisition or joint venture opportunities or complete any particular acquisition, combination, joint venture or other transaction

9

on acceptable terms. Our identification of suitable acquisition candidates and joint venture opportunities involves risks inherent in assessing the values, strengths, weaknesses, risks and profitability of these opportunities including their effects on our business, diversion of our management’s attention and risks associated with unanticipated problems or unforeseen liabilities. If we are successful in pursuing future acquisitions or joint ventures, we may be required to expend significant funds, incur additional debt, or issue additional securities, which may materially and adversely affect our results of operations and be dilutive to our stockholders. If we spend significant funds or incur additional debt, our ability to obtain financing for working capital or other purposes could decline and we may be more vulnerable to economic downturns and competitive pressures. In addition, we cannot guarantee that we will be able to finance additional acquisitions or that we will realize any anticipated benefits from acquisitions or joint ventures that we complete. Should we successfully acquire another business, the process of integrating acquired operations into our existing operations may result in unforeseen operating difficulties and may require significant financial resources that would otherwise be available for the ongoing development or expansion of our existing business. Our failure to identify suitable acquisition or joint venture opportunities may restrict our ability to grow our business.

Fluctuations in the supply of components and raw materials we use in manufacturing our products could cause production delays or reductions in the number of products we manufacture, which could materially adversely affect our business, financial condition and results of operations.

Our business is subject to the risk of periodic shortages of raw materials. We purchase raw materials pursuant to purchase orders placed from time to time in the ordinary course of business. Failure or delay by such suppliers in supplying us necessary raw materials could adversely affect our ability to manufacture and deliver products on a timely and competitive basis.

While we believe that we may, in certain circumstances, secure alternative sources of these materials, we may incur substantial delays and significant expense in doing so, the quality and reliability of alternative sources may not be the same and our operating results may be materially adversely affected. Alternative suppliers might charge significantly higher prices for materials than we currently pay. Under such circumstances, the disruption to our business could have a material adverse impact on our customer relationships, business, financial condition, and results of operations.

The cost of raw materials that we use to manufacture our products, particularly petroleum and petroleum-based raw materials, are subject to escalation and could increase, which may materially adversely affect our business, financial condition and results of operations.

The cost of raw materials, including petroleum and petroleum-based raw materials such as resins, used in the production of our products, represents a significant portion of our direct manufacturing costs. We have provisions in most of our sales orders that allow us to pass on to our customers price fluctuations related to certain raw materials, including petroleum. The number of customers to which we are not able to pass on such price increases may increase in the future, and any such increase could adversely affect our operating margins and cash flows. Any fluctuations in the price of petroleum, or any other material used in the production of our products, may have a material adverse effect on our business, financial condition and results of operations. Such price increases could reduce demand for our products. If we are not able to buy raw materials at fixed prices, or pass on price increases to our customers, we may lose orders or enter into orders with less favorable terms,

10

any of which could have a material adverse effect on our business, financial condition and results of operations.

Reductions in the availability of energy supplies or an increase in energy costs may increase our operating costs.

We use electricity and natural gas at our manufacturing facilities to operate our equipment. Over the past several years, prices for electricity and natural gas have fluctuated significantly. An outbreak or escalation of hostilities between the United States and any foreign power and, in particular, a prolonged armed conflict in the Middle East, or a natural disaster, could result in a real or perceived shortage of petroleum and/or natural gas, which could result in an increase in the cost of electricity or energy generally as well as an increase in the cost of our raw materials, of which many are petroleum-based. In addition, increased energy costs negatively impact our freight costs due to higher fuel prices. Future limitations on the availability or consumption of petroleum products and/or an increase in energy costs, particularly electricity for plant operations, could have a material adverse effect upon our business and results of operations.

Our Packaging segment may lose business if our customers shift their manufacturing offshore.

Historically, geography has played a large factor in the packaging business. Manufacturing and other companies shipping products typically buy packaging from companies that are relatively close to their manufacturing facilities to increase shipping efficiency and decrease costs. As many U.S. companies move their manufacturing operations overseas, particularly to the Far East, the associated packaging business often follows. We have lost customers in the past and may lose customers again in the future as a result of customers moving their manufacturing facilities offshore, then hiring our competitors that operate packaging-production facilities perceived to be more territorially advantageous. As a result, our sales may suffer, which could have a material adverse effect upon our business and results of operations.

Failure to retain key personnel could impair our ability to execute our business strategy.

The continuing service of our executive officers and essential engineering, technical and management personnel, together with our ability to attract and retain such personnel, is an important factor in our continuing ability to execute our strategy. There is substantial competition to attract such employees, and the loss of any such key employees could have a material adverse effect on our business and operating results. The same could be true if we were to experience a high turnover rate among engineering and technical personnel and we were unable to replace them.

Members of our board of directors and management who also are our stockholders exert significant influence over us.

Based on information made available to us, we believe that our executive officers, directors and their affiliates collectively owned approximately 18% of our outstanding shares of common stock as of March 2, 2011. As a result, those stockholders may, if acting together, control or exert substantial influence over actions requiring stockholders’ approval, including elections of our directors, amendments to our certificate of incorporation, mergers, sales of assets or other business acquisitions or dispositions.

11

As a public company, we need to comply with the reporting obligations of the Securities Exchange Act of 1934, the Sarbanes-Oxley Act of 2002, and the Dodd-Frank Act of 2010. If we fail to comply with the reporting obligations of these laws or if we fail to maintain adequate internal controls over financial reporting, our business, results of operations and financial condition, and investors’ confidence in us, could be materially and adversely affected.

As a public company, we are required to comply with the periodic reporting obligations of the Exchange Act, including preparing annual reports, quarterly reports and current reports. We are also subject to certain of the provisions of the Sarbanes-Oxley and Dodd-Frank Acts which, among other things, require enhanced disclosure of business, financial, compensation and governance information. Our failure to prepare and disclose this information in a timely manner could subject us to penalties under federal securities laws, expose us to lawsuits, and restrict our ability to access financing. We may identify areas requiring improvement with respect to our internal control over financial reporting, and we may be required to design enhanced processes and controls to address issues identified. This could result in significant delays and cost to us and require us to divert substantial resources, including management time, from other activities. If we fail to maintain the adequacy of our internal controls, we may not be able to ensure that we can conclude on an ongoing basis that we have effective internal control over financial reporting. Moreover, effective internal controls are necessary for us to produce reliable financial reports and are important to help prevent fraud.

Provisions of our corporate charter documents, Delaware law, and our stockholder rights plan may dissuade potential acquirers, prevent the replacement or removal of our current management and may thereby affect the price of our common stock.

The board of directors has the authority to issue up to 1,000,000 shares of preferred stock and to determine the price, rights, preferences, privileges, and restrictions, including voting rights of those shares without any further vote or action by the stockholders. The rights of the holders of common stock will be subject to, and may be adversely affected by, the rights of the holders of any preferred stock that may be issued in the future. The issuance of preferred stock, while providing flexibility in connection with possible financings, acquisitions and other corporate purposes, could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting stock. We have no present plans to issue shares of preferred stock. Further, certain provisions of our certificate of incorporation, bylaws, and Delaware law could delay or make more difficult a merger, tender offer or proxy contest involving us.

We also have a stockholder rights plan designed to protect and enhance the value of our outstanding equity interests in the event of an unsolicited attempt to acquire us in a manner or on terms not approved by the board of directors and that would prevent stockholders from realizing the full value of their shares of our common stock. Its purposes are to deter those takeover attempts that the board believes are undesirable, to give the board more time to evaluate takeover proposals and consider alternatives, and to increase the board’s negotiating position to enhance value in the event of a takeover. The rights issued pursuant to the plan are not intended to prevent all takeovers of our Company. However, the rights may have the effect of rendering more difficult or discouraging our acquisition. The rights may cause substantial dilution to a person or group that attempts to acquire us on terms or in a manner not approved by the board of directors, except pursuant to an offer conditioned upon the negation, purchase, or redemption of the rights with respect to which the condition is satisfied.

12

Additional provisions of our certificate of incorporation and bylaws could have the effect of making it more difficult for a third party to acquire a majority of our outstanding voting common stock. These include provisions that classify our board of directors, limit the ability of stockholders to take action by written consent, call special meetings, remove a director for cause, amend the bylaws, or approve a merger with another company. In addition, our bylaws set forth advance notice procedures for stockholders to nominate candidates for election as directors or to bring matters before an annual meeting of stockholders.

We are subject to the provisions of Section 203 of the Delaware General Corporation Law which prohibits a publicly-held Delaware corporation from engaging in a “business combination” with an “interested stockholder” for a period of three years after the date of the transaction in which the person became an interested stockholder, unless the business combination is approved in a prescribed manner. For purposes of Section 203, a “business combination” includes a merger, asset sale or other transaction resulting in a financial benefit to the interested stockholder, and an “interested stockholder” is a person who, either alone or together with affiliates and associates, owns (or within the past three years did own) 15% or more of the corporation’s voting stock.

ITEM 2.              PROPERTIES

The following table presents certain information relating to each of the Company’s properties:

13

(1) Subject to mortgage (see Note 9 to the Consolidated Financial Statements).

(2) United Development Company Limited, a Florida limited partnership and an affiliate of the Company and certain officers, directors and stockholders of the Company, is the lessor of these properties. United Development Company Limited was consolidated into the Company’s financial statements in 2003 (see Note 8 to the Consolidated Financial Statements).

ITEM 3.              LEGAL PROCEEDINGS

The Company is not a party to any material pending legal proceedings.

PART II

ITEM 5.              MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS, AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Price

From July 8, 1996, until April 18, 2001, the Company’s common stock was listed on the NASDAQ National Market under the symbol “UFPT.” Since April 19, 2001, the Company’s common stock has been listed on the NASDAQ Capital Market. The following table sets forth the range of high and low quotations for the common stock as reported by NASDAQ for the quarterly periods from January 1, 2009, to December 31, 2010:

14

Number of Stockholders

As of February 15, 2011, there were 93 holders of record of the Company’s common stock.

Due to the fact that many of the shares are held by brokers and other institutions on behalf of stockholders, the Company is unable to estimate the total number of individual stockholders represented by these holders of record.

Dividends

The Company did not pay any dividends in 2009 or 2010. The Company presently intends to retain all of its earnings to provide funds for the operation of its business, although it would consider paying cash dividends in the future. The Company’s ability to pay dividends is subject to approval by its principal lending institution.

Stock Plans

The Company maintains two active stock option plans to provide long-term rewards and incentives to the Company’s key employees, officers, employee directors, non-employee directors, and advisors. The 1993 Employee Stock Option Plan provides for the issuance of up to 1,550,000 shares of the Company’s common stock. The 2009 Non-Employee Director Stock Incentive Plan provides for the issuance of up to 975,000 shares of the Company’s common stock to non-employee directors. Additional details of these plans are discussed in Note 13 to the consolidated financial statements.

The Company also maintains the 2003 Incentive Plan, which provides the Company with the ability to offer up to 1,250,000 shares of equity-based incentives to present and future executives, and other employees who are in a position to contribute to the long-term success and growth of the Company.

Each of these plans and their amendments has been approved by the Company’s stockholders.

Summary plan information as of December 31, 2010, is as follows:

(1)  Will be issued upon exercise of outstanding options or vesting of stock unit awards.

(2)  The plan expired on April 12, 2010.

15

ITEM 6.              SELECTED FINANCIAL DATA

The following table summarizes our financial data for the periods presented. You should read the following financial information together with the information under “Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our financial statements and the notes to those financial statements appearing elsewhere in this document. The selected statements of operations data for the fiscal years ended December 31, 2010, 2009, and 2008, and the selected balance sheet data as of December 31, 2010, and 2009, are derived from the audited financial statements, which are included elsewhere in this document. The selected statements of operations data for the years ended December 31, 2007, and 2006, and the balance sheet data at December 31, 2008, 2007, and 2006, are derived from our audited financial statements not included in this document.

Selected Consolidated Financial Data:

(1) See Note 20 to the consolidated financial statements for segment information.

(2) Amount includes restructuring charges of $1.3 million.

16

ITEM 7.              MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

UFP Technologies is an innovative designer and custom converter of foams, plastics, and fiber products. The Company serves a myriad of markets, but specifically targets opportunities in the automotive, computer and electronics, medical, aerospace and defense, industrial, and consumer markets.

On March 9, 2009, the Company acquired selected assets of the Hillsdale, Michigan, operations of Foamade Industries, Inc. (“Foamade”), a business specializing in the fabrication of technical urethane foams for a myriad of industries. The Company transitioned the acquired assets to its Grand Rapids, Michigan, plant.

On July 7, 2009, the Company acquired substantially all of the assets of E.N. Murray Co. (“ENM”), a Denver, Colorado-based foam fabricator. ENM specialized in the fabrication of technical urethane foams, primarily for the medical industry. This acquisition brought to the Company further access and expertise in fabricating technical urethane foams and a seasoned management team.

On August 24, 2009, the Company acquired selected assets of Advanced Materials, Inc. (“AMI”), a wholly-owned subsidiary of Advanced Materials Group, Inc. Located in Rancho Dominguez, California, AMI specialized in the fabrication of technical urethane foams, primarily for the medical industry.

In 2010, the Company experienced revenue growth from its 2009 acquired businesses (which are primarily focused on the medical market) as well as increased demand for automotive interior trim parts, overlaid on a streamlined organization. As a result, the Company achieved 2010 sales and operating income growth of 22% and 76%, respectively.

The Company’s strategy includes further organic growth and growth through strategic acquisitions.

Results of Operations

The following table sets forth, for the years indicated, the percentage of revenues represented by the items as shown in the Company’s consolidated statements of operations:

17

2010 Compared to 2009

Net sales increased 21.7% to $120.8 million for the year ended December 31, 2010, from net sales of $99.2 million in the same period of 2009, driven primarily by the 2009 acquisitions of Foamade, ENM, and AMI (all within the Component Products segment). Without sales from these acquisitions for the portion of 2010 in which they were not owned in 2009, sales would have increased 10.0% to $109.1 million. The increase in sales excluding these acquisitions was largely due to increased demand for interior trim parts from the automotive industry of approximately $6.6 million (Component Products segment), as well as an increase in sales in the Packaging segment of approximately $2.3 million, due largely to the impact of the improved economy on demand for our customers’ parts.

Gross profit as a percentage of sales (“Gross Margin”) increased to 28.7% for the year ended December 31, 2010, from 26.9% in 2009. The increase in gross margin is primarily attributable to the Company’s ability to leverage sales growth against the fixed component of cost of sales (overhead), partially offset by lower-than-average margins from the increased sales of automotive trim parts (Component Products segment). Overhead as a percentage of sales decreased by 2.2% while material and direct labor collectively increased by 0.4%.

Selling, General, and Administrative Expenses (“SG&A”) increased 9.2% to $20.2 million for the year ended December 31, 2010, from $18.5 million in 2009. As a percentage of sales, SG&A was 16.8% and 18.7%, respectively, for the years ended December 31, 2010, and 2009. The increase in SG&A for the year ended December 31, 2010, is primarily due to increased SG&A associated with newly acquired companies of approximately $1.2 million (Component Products segment) and increased variable-based compensation of approximately $500,000 (primarily Component Products segment). The decrease in SG&A as a percentage of sales is primarily a result of the fixed-cost components of SG&A being measured against higher sales.

Interest expense net of interest income decreased to approximately $116,000 for the year ended December 31, 2010, from interest expense of approximately $233,000 in 2009. The decrease in interest expense is primarily attributable to higher interest earned on excess cash balances, as well as lower interest paid on declining term debt balances.

18

The Company recorded income tax expense as a percentage of pre-tax income of 34.8% and 32.0% for the year ended December 31, 2010 and 2009, respectively. The increase in effective tax rate for 2010 is primarily due to the non-taxable gains recorded on the acquisitions of Foamade, ENM, and AMI in 2009. The Company has deferred tax assets on its books associated with net operating losses generated in previous years. The Company has considered both positive and negative available evidence in its determination that the deferred tax assets will be realized, and has not recorded a tax valuation allowance at December 31, 2010. The Company will continue to assess the realizability of deferred tax assets and, when appropriate, will record a valuation allowance against these assets. The amount of the net deferred tax asset considered realizable, however, could be reduced in the near term, if estimates of future taxable income during the carryforward period are reduced.

2009 Compared to 2008

Net sales decreased 9.8% to $99.2 million in the year ended December 31, 2009, from $110.0 million in the same period of 2008. Without sales from its newly acquired Foamade, ENM, and AMI operations (all within the Component Products segment), sales would have declined 19.5% for the year ended December 31, 2009. Sales in the Component Products segment (including those from the newly acquired operations) increased slightly to $61.0 million in 2009, from $60.8 million in 2008. Without sales from the newly acquired operations, Component Products sales would have declined 17.3% to $50.4 million for the year ended December 31, 2009. This decrease in sales is primarily due to a decrease in sales to the automotive industry of approximately $9.6 million. Sales in the Packaging segment decreased 22.2% to $38.2 million for the year ended December 31, 2009, from $49.2 million in the same period of 2008. The decrease in sales is largely due to a decrease in sales of $3.9 million to a key electronics customer and overall reduced demand for packaging because of the impact of the poor economy on demand for our customers’ products, partially offset by an increase in demand for environmentally-friendly molded fiber packaging of approximately $700,000.

Gross profit as a percentage of sales (“Gross Margin”) increased to 26.9% in 2009 from 26.0% in 2008. The improvement in gross margin is primarily attributable to Company-wide manufacturing efficiency and cost-cutting initiatives, as well as a favorable shift in product mix (lower auto sales); material cost as a percentage of sales is down 1.2%, partially offset by higher overhead as a percentage of sales due to the fixed-cost components of overhead measured against lower sales.

Selling, General, and Administrative Expenses (“SG&A”) decreased 1.5% to $18.5 million for the year ended December 31, 2009, from $18.8 million in 2008. As a percentage of sales, SG&A was 18.7% and 17.1% in the years ended December 31, 2009, and 2008, respectively. The decline in SG&A for the year ended December 31, 2009, is primarily due to reduced administrative variable compensation of approximately $900,000 (both business segments) and reduced SG&A associated with the consolidation of the Company’s two Michigan facilities of approximately $550,000 (Component Products segment), partially offset by SG&A associated with newly acquired companies of approximately $1.3 million (Component Products segment). The increase in SG&A as a percentage of sales is primarily a result of the fixed-cost components of SG&A being measured against lower sales.

The Company recorded a restructuring charge of approximately $1.3 million during the year ended December 31, 2008, associated with the consolidation of its Macomb Township, Michigan, automotive operations into its newly acquired plant in Grand Rapids, Michigan. The $1.3 million charge was for the costs associated with vacating the Macomb Township premises, severance, relocation, and stay-bonuses for its employees, equipment moving and hook-up costs, and training

19

and other start-up costs. As of December 31, 2008, the move was completed and all significant costs had been incurred. The Company believes cost savings exceeded $1.4 million as a result of the consolidation for the fiscal year ended December 31, 2009.

The Company recorded acquisition-related gains of approximately $840,000 for the year ended December 31, 2009. The acquisitions of Foamade, ENM, and AMI all resulted in bargain purchase gains, as the consideration paid was less than the fair market value of the net assets acquired. The Company believes the net assets were acquired at a bargain purchase due to the overall weak economy.

Interest expense decreased to approximately $233,000 for the year ended December 31, 2009, from $334,000 in 2008. The decrease in interest expense is primarily attributable to lower average interest rates.

The Company recorded income tax expense as a percentage of pre-tax income of 32.0% and 36.9% for the years ended December 31, 2009, and 2008, respectively. The primary reason for the decrease in income tax expense as a percentage of pre-tax income is due to the non-taxable gains recorded on the acquisitions of Foamade, ENM, and AMI. The Company has deferred tax assets on its books associated with net operating losses generated in previous years. The Company has considered both positive and negative available evidence in its determination that the deferred tax assets will be realized, and has not recorded a tax valuation allowance at December 31, 2009. The Company will continue to assess the realizability of deferred tax assets created by recording tax benefits on operating losses and, when appropriate, will record a valuation allowance against these assets. The amount of the net deferred tax asset considered realizable, however, could be reduced in the near term, if estimates of future taxable income during the carryforward period are reduced.

Liquidity and Capital Resources

The Company funds its operating expenses, capital requirements, and growth plan through internally-generated cash.

As of December 31, 2010, and 2009, working capital was approximately $38.3 million and $27.7 million, respectively. The increase in working capital is primarily attributable to an increase in cash of approximately $9.4 million due to cash generated from operations and increased refundable income taxes of approximately $1.4 million, due to state tax planning opportunities and overpayment of estimated taxes, partially offset by an increase in accounts payable of approximately $900,000 due to the timing of year-end cash disbursements.

Cash provided from operations was approximately $12.6 million and $10.7 million in 2010 and 2009, respectively. The primary reasons for the increase in cash generated from operations in 2010 were an increase in profits of approximately $3.4 million, an increase in accrued taxes and other expenses of approximately $527,000 during the fiscal year ended December 31, 2010, partially offset by an increase in inventory of approximately $396,000 during the fiscal year ended December 31, 2010, and an increase in deferred and refundable income taxes of approximately $1.1 million during the fiscal year ended December 31, 2010.  Net cash used in investing activities in 2010 was approximately $3.3 million and was used primarily for the acquisition of new manufacturing equipment of approximately $2.0 million and the acquisition of previously leased commercial real estate in Denver, Colorado, relating to ENM’s operations of approximately $1.2 million.

20

On January 29, 2009, the Company amended and extended its credit facility with Bank of America, NA. The facility is comprised of: (i) a revolving credit facility of $17 million; (ii) a term loan of $2.1 million with a seven-year straight-line amortization; (iii) a term loan of $1.8 million with a 20-year straight-line amortization; and (iv) a term loan of $4.0 million with a 20-year straight-line amortization. Extensions of credit under the revolving credit facility are based in part upon accounts receivable and inventory levels. Therefore, the entire $17 million may not be available to the Company. As of December 31, 2010, the Company had availability of approximately $15.7 million based upon collateral levels in place as of that date. The credit facility calls for interest of LIBOR plus a margin that ranges from 1.0% to 1.5% or, at the discretion of the Company, the bank’s prime rate less a margin that ranges from 0.25% to zero. In both cases the applicable margin is dependent upon Company performance. The loans are collateralized by a first priority lien on all of the Company’s assets, including its real estate located in Georgetown, Massachusetts, and in Grand Rapids, Michigan. Under the credit facility, the Company is subject to a minimum fixed-charge coverage financial covenant. The Company’s $17 million revolving credit facility matures November 30, 2013; the term loans are all due on January 29, 2016. At December 31, 2010, the interest rate on these facilities was 1.29%, and there were no borrowings outstanding on the line of credit.

UDT has a mortgage note collateralized by the Florida facility, dated May 22, 2007. The note had an original principal balance of $786,000 and calls for 180 monthly payments of $7,147. The interest rate is fixed at approximately 7.2%.

Commitments, Contractual Obligations, and Off-Balance-Sheet Arrangements

The following table summarizes the Company’s contractual obligations at December 31, 2010:

The Company requires cash to pay its operating expenses, purchase capital equipment, and to service the obligations listed above. The Company’s principal sources of funds are its operations and its revolving credit facility. Although the Company generated cash from operations in the year ended December 31, 2010, it cannot guarantee that its operations will generate cash in future periods.

The Company does not believe inflation has had a material impact on its results of operations in the last three years.

The Company had no off-balance-sheet arrangements in 2010, other than operating leases.

21

Critical Accounting Policies

The preparation of consolidated financial statements requires the Company to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an ongoing basis, the Company evaluates its estimates, including those related to product returns, bad debts, inventories, intangible assets, income taxes, warranty obligations, restructuring charges, contingencies, and litigation. The Company bases its estimates on historical experience and on various other assumptions believed to be reasonable under the circumstances, including current and anticipated worldwide economic conditions, both in general and specifically in relation to the packaging industry, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions.

The Company’s significant accounting policies are described in Note 1 to the consolidated financial statements included in Item 8 of this Form 10-K. The Company believes the following critical accounting policies necessitated that significant judgments and estimates be used in the preparation of its consolidated financial statements.

The Company has reviewed these policies with its Audit Committee.

Revenue Recognition

The Company recognizes revenue at the time of shipment when title and risk of loss have passed to the customer, persuasive evidence of an arrangement exists, performance of its obligation is complete, its price to the buyer is fixed or determinable, and the Company is reasonably assured of collection. If a loss is anticipated on any contract, a provision for the entire loss is made immediately. Determination of these criteria, in some cases, requires management’s judgment. Should changes in conditions cause management to determine that these criteria are not met for certain future transactions, revenue for any reporting period could be adversely affected.

Intangible Assets

Intangible assets include patents and other intangible assets. Intangible assets with an indefinite life are not amortized. Intangible assets with a definite life are amortized on a straight-line basis, with estimated useful lives ranging from eight to 14 years. Indefinite-lived intangible assets are tested for impairment annually, and will be tested for impairment between annual tests if an event occurs or circumstances change that would indicate that the carrying amount may be impaired. Intangible assets with a definite life are tested for impairment whenever events or circumstances indicate that their carrying amounts may not be recoverable.

Goodwill

Goodwill is tested for impairment annually, and will be tested for impairment between annual tests if an event occurs or circumstances change that would indicate that the carrying amount may be impaired. Impairment testing for goodwill is done at a reporting unit level. Reporting units are one level below the business segment level, but can be combined when reporting units within the same segment have similar economic characteristics. The Company’s reporting units include its Component Products segment, Packaging segment (excluding its Molded Fiber operation), and its

22

Molded Fiber operation. An impairment loss generally would be recognized when the carrying amount of the reporting unit’s net assets exceeds the estimated fair value of the reporting unit. The Company completed its annual goodwill impairment test as of December 31, 2010. Fair values of the reporting units were determined using a combination of several valuation methodologies, including income and market approaches, which include the use of Level 1 and Level 3 inputs (see Note 18 to the consolidated financial statements).

Accounts Receivable

The Company maintains allowances for doubtful accounts for estimated losses resulting from the inability of its customers to make required payments. These allowances for doubtful accounts are determined by reviewing specific accounts the Company has deemed are at risk of being uncollectible and other credit risks associated with groups of customers. If the financial condition of the Company’s customers were to deteriorate or economic conditions were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required with a resulting charge to results of operations.

Inventories

Inventories include material, labor, and manufacturing overhead and are valued at the lower of cost or market. Cost is determined using the first-in, first-out (FIFO) method.

The Company periodically reviews the realizability of its inventory for potential obsolescence. Determining adequate reserves for inventory obsolescence requires management’s judgment. Conditions impacting the realizability of the Company’s inventory could cause actual asset write-offs to be materially different than the reserve balances.

Deferred Income Taxes

The Company evaluates the need for a valuation allowance to reduce its deferred tax assets to the amount that is more likely than not to be realized. The Company has considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for a valuation allowance. Should the Company determine that it would not be able to realize all or part of its net deferred tax asset in the future, an adjustment to the deferred tax asset would be charged to income in the period such determination was made.

The following discussion of the Company’s market risk includes “forward-looking statements” that involve risk and uncertainties. Actual results could differ materially from those projected in the forward-looking statements.

Market risk represents the risk of changes in value of a financial instrument caused by fluctuations in interest rates, foreign exchange rates, and equity prices. At December 31, 2010, the Company’s cash and cash equivalents consisted of bank accounts in U.S. dollars, and their valuation would not be affected by market risk. The Company has four debt instruments where interest is based upon either the Prime rate or LIBOR and, therefore, future operations could be affected by interest rate changes; however, the Company believes the market risk of the debt is minimal.

23

The consolidated Financial Statements and Supplementary Data of the Company are listed under Part IV, Item 15, in this Report.

None.

The Company carried out an evaluation, under the supervision and with the participation of its management, including the Chief Executive Officer and Chief Financial Officer, of the effectiveness of the design and operation of the Company’s “disclosure controls and procedures” (as defined in Exchange Act Rule 13a-15(e)) as of the end of the period covered by this report. Based upon that evaluation, the Chief Executive Officer and Chief Financial Officer concluded that the Company’s disclosure controls and procedures are effective.

The Company’s management is responsible for establishing and maintaining an adequate system of internal control over financial reporting, as defined in Exchange Act Rule 13a-15(f). Management conducted an assessment of the Company’s internal control over financial reporting as of December 31, 2010, based on the framework established by the Committee of Sponsoring Organizations of the Treadway Commission in Internal Control — Integrated Framework. Based on the assessment, management concluded that, as of December 31, 2010, the Company’s internal control over financial reporting is effective.

This annual report does not include an attestation report of the Company’s registered public accounting firm regarding the Company’s internal control over financial reporting. Management’s report was not subject to attestation by the Company’s independent registered public accounting firm pursuant to rules of the Securities and Exchange Commission.

There was no change in the Company’s internal control over financial reporting that occurred during the Company’s most recently completed fiscal quarter that has materially affected, or is reasonably likely to materially affect, the Company’s internal control over financial reporting.

None.

PART III

The information required by this Item 10 is hereby incorporated by reference to the Company’s definitive proxy statement to be filed by the Company within 120 days after the close of its fiscal year.

24

The information required by this Item 11 is hereby incorporated by reference to the Company’s definitive proxy statement to be filed by the Company within 120 days after the close of its fiscal year.

The information required by this Item 12 is hereby incorporated by reference to the Company’s definitive proxy statement to be filed by the Company within 120 days after the close of its fiscal year.

The information required by this Item 13 is hereby incorporated by reference to the Company’s definitive proxy statement to be filed by the Company within 120 days after the close of its fiscal year.

The information required by this Item 14 is hereby incorporated by reference to the Company’s definitive proxy statement to be filed by the Company within 120 days after the close of its fiscal year.

PART IV

25

(a) (3) Exhibits

26

27

A.                Incorporated by reference to the Company’s Registration Statement on Form S-1 (Registration No. 33-70912). The number set forth herein is the number of the Exhibit in said Registration Statement.

B.                  Incorporated by reference to the Company’s Annual Report on Form 10-K for its fiscal year ended December 31, 1993. The number set forth herein is the number of the Exhibit in said Annual Report.

C.                  Incorporated by reference to the Company’s report on 8-K dated February 3, 1997. The number set forth herein is the number of the Exhibit in said report.

28

D.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 1998. The number set forth herein is the number of the Exhibit in said Annual Report.

E.                   Incorporated by reference to the Company’s Report on Form 8-K dated January 31, 2000. The number set forth herein is the number of the Exhibit in said Report.

F.                   Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 1996. The number set forth herein is the number of the Exhibit in said Quarterly Report.

G.                  Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended March 31, 2004. The number set forth herein is the number of the exhibit in said Quarterly Report.

H                    Incorporated by reference to the Company’s report on Form 8-K dated January 13, 1999. The number set forth herein is the number of the Exhibit in said Report.

I.                      Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 1998. The number set forth herein is the number of the Exhibit in said Quarterly Report.

J.                     Incorporated by reference to the Company’s Registration Statement on Form S-8 (Registration No. 33-76440). The number set forth herein is the number of the Exhibit in said Registration Statement.

K.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 1995. The number set forth herein is the number of the Exhibit in said Annual Report.

L.                   Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 1995. The number set forth herein is the number of the Exhibit in said Quarterly Report.

M.              Incorporated by reference to the Company’s Proxy Statement relating to the Company’s Annual Meeting of Stockholders on June 5, 2002.

N.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2000. The number set forth herein is the number of the Exhibit in said Annual Report.

O.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2001. The number set forth herein is the number of the Exhibit in said Annual Report.

P.                   Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended September 30, 2002. The number set forth herein is the number of the Exhibit in said Quarterly Report.

Q.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2002. The number set forth is the number of the exhibit in said Annual Report.

R.                  Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 2003. The number set forth herein is the number of the Exhibit in said Annual Report.

S.                   Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2003. The number set forth is the number of the exhibit in said Annual Report.

29

T.                  Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 2004. The number set forth herein is the number of the exhibit in said Quarterly Report.

U.                 Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2005. The number set forth herein is the number of the exhibit in said annual report.

V.                  Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended March 31, 2006. The number set forth herein is the number of the exhibit in said quarterly report.

W.             Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 2006. The number set forth herein is the number of the exhibit in said quarterly report.

X.                 Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended September 30, 2006. The number set forth herein is the number of the exhibit in said Quarterly Report.

Y.                  Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 2007. The number set forth herein is the number of the exhibit in said Quarterly Report.

Z.                  Incorporated by reference to the Company’s Current Report on Form 8-K filed October 12, 2007. The number set forth herein is the number of the Exhibit in said Report.

AA.      Incorporated by reference to the Company’s Current Report on Form 8-K filed January 18, 2008. The number set forth herein is the number of the Exhibit in said Report.

BB.          Incorporated by reference to Appendix C to the Company’s Proxy Statement relating to the Company’s Annual Meeting of Stockholders on June 6, 2007.

CC.          Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2007. The number set forth herein is the number of the exhibit in said Annual Report.

DD.        Incorporated by reference to Appendix A to the Company’s Proxy Statement relating to the Company’s Annual Meeting of Stockholders on June 4, 2008.

EE.            Incorporated by reference to Appendix B to the Company’s Proxy Statement relating to the Company’s Annual Meeting of Stockholders on June 4, 2008.

FF.            Incorporated by reference to the Company’s Current Report on Form 8-K filed June 10, 2008. The number set forth herein is the number of the exhibit in said Report.

GG             Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended September 30, 2008. The number set forth herein is the number of the exhibit in said Quarterly Report.

HH.        Incorporated by reference to the Company’s Current Report on Form 8-K filed March 2, 2009. The number set forth herein is the number of the Exhibit in said Report.

II.                  Incorporated by reference to the Company’s Current Report on Form 8-K filed March 24, 2009. The number set forth herein is the number of the Exhibit in said Report.

JJ.                Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2008. The number set forth herein is the number of the exhibit in said Annual Report.

30

KK.        Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended June 30, 2009. The number set forth herein is the number of the exhibit in said Quarterly Report.

LL.            Incorporated by reference to the Company’s Quarterly Report on Form 10-Q for the three months ended September 30, 2009. The number set forth herein is the number of the exhibit in said Quarterly Report.

MM. Incorporated by reference to the Company’s Annual Report on Form 10-K for the fiscal year ended December 31, 2009. The number set forth herein is the number of the Exhibit in said Annual Report.

NN.        Incorporated by reference to the Company’s Current Report on Form 8-K filed February 25, 2011. The number set forth herein is the number of the Exhibit in said Report.

OO.        Incorporated by reference to the Company’s Current Report on Form 8-K filed March 8, 2011. The number set forth herein is the number of the Exhibit in said Report.

*                      Management contract or compensatory plan or arrangement.

**               In accordance with Rule 12b-32 under the Securities Exchange Act of 1934, as amended, reference is made to the documents previously filed with the Securities and Exchange Commission, which documents are hereby incorporated by reference.

The SEC allows the Company to incorporate by reference certain information into this annual report on Form 10-K. This means that the Company can disclose important information by reference to other documents the Company has filed separately with the SEC. These documents contain important information about the Company and its financial condition. The Company has incorporated by reference into this annual report the information indicated above. This information is considered to be a part of this annual report, except for any information that is superseded by information that is filed at a later date.

You may read and copy any of the documents incorporated by reference in this annual report at the following locations of the SEC by using the Company’s file number, 001-12648:

You may also obtain copies of this information by mail from the Public Reference Room of the SEC, 450 Fifth Street, NW, Room 1024, Washington, DC 20549, at prescribed rates. Please call the SEC at 1-800-SEC-0330 for further information on the public reference room. The SEC also maintains a World Wide Web site that contains reports, proxy statements and other information about issuers, including the Company, that file electronically with the SEC. The address of that site is http://www.sec.gov.

Documents incorporated by reference are also available from the Company without charge, excluding any exhibits to those documents unless the exhibit is specifically incorporated by reference in this annual report. You can obtain these documents by requesting them by telephone or in writing from the Company at 172 East Main Street, Georgetown, MA 01833, (978) 352-2200.

31

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

UFP TECHNOLOGIES, INC.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the date indicated.

32

UFP TECHNOLOGIES, INC.

Consolidated Financial Statements

and Financial Statement Schedule

As of December 31, 2010, and 2009

And for the Years Ended December 31, 2010, 2009, and 2008

With Report of Independent Registered Public Accounting Firm

F-1

UFP TECHNOLOGIES, INC.

Index to Consolidated Financial Statements and Financial Statement Schedule

F-2

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

The Board of Directors and Stockholders

UFP Technologies, Inc.

Georgetown, MA

We have audited the accompanying consolidated balance sheets of UFP Technologies, Inc. and subsidiaries as of December 31, 2010 and 2009, and the related consolidated statements of operations, stockholders’ equity and cash flows for each of the years in the three year period ended December 31, 2010.  Our audits also included the financial statement schedule for each of the years in the three year period ended December 31, 2010 as listed in the index at Item 15(a)(2).  UFP Technologies, Inc.’s management is responsible for these consolidated financial statements and schedule.  Our responsibility is to express an opinion on these consolidated financial statements and schedule based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States).  Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the consolidated financial statements are free of material misstatement.  The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting.  Our audits included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the Company’s internal control over financial reporting.  Accordingly, we express no such opinion.  An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of UFP Technologies, Inc. and subsidiaries as of December 31, 2010 and 2009, and the results of their operations and their cash flows for each of the years in the three year period ended December 31, 2010 in conformity with accounting principles generally accepted in the United States of America.  Also, in our opinion, the related financial statement schedule when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly in all material respects the information set forth therein.

F-3

UFP TECHNOLOGIES, INC.

CONSOLIDATED BALANCE SHEETS