Attached files

file filename
EX-23 - BENCHMARK ELECTRONICS INCv175725_ex23.htm
EX-21 - BENCHMARK ELECTRONICS INCv175725_ex21.htm
EX-32.1 - BENCHMARK ELECTRONICS INCv175725_ex32-1.htm
EX-32.2 - BENCHMARK ELECTRONICS INCv175725_ex32-2.htm
EX-31.1 - BENCHMARK ELECTRONICS INCv175725_ex31-1.htm
EX-31.2 - BENCHMARK ELECTRONICS INCv175725_ex31-2.htm
EX-10.20 - BENCHMARK ELECTRONICS INCv175725_ex10-20.htm

 
UNITED STATES
 
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549

FORM 10-K

 (Mark One)
x
Annual Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
 
For the fiscal year ended December 31, 2009
or
 
o
Transition Report Pursuant to Section 13 or 15(d) of the Securities Exchange Act of 1934
 
For the transition period from __________ to ____________

Commission File Number 1-10560

BENCHMARK ELECTRONICS, INC.
(Exact name of registrant as specified in its charter)
 
Texas
74-2211011
(State or other jurisdiction of
(I.R.S. Employer
incorporation or organization)
Identification Number)
 
3000 Technology Drive
Angleton, Texas 77515
(979) 849-6550
(Address, including zip code, and telephone number, including area code, of principal executive offices)

Securities registered pursuant to Section 12(b) of the Act:
 
Title of each class
Name of each exchange on which registered
Common Stock, par value $0.10 per share
New York Stock Exchange, Inc.
Preferred Stock Purchase Rights 
New York Stock Exchange, Inc.

Securities registered pursuant to Section 12(g) of the Act: None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.   Yes x No o

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act. Yes o No x

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes x No o

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T during the preceding 12 months (or for such shorter periods that the registrant was required to submit and post such files).
Yes o No o

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b–2 of the Act.
 
Large accelerated filer x       Accelerated filer o        Non-accelerated filer o Smaller Reporting Company o

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b–2 of the Act).
 
Yes o No x

As of June 30, 2009, the number of outstanding Common Shares was 64,999,858. As of such date, the aggregate market value of the Common Shares held by non-affiliates, based on the closing price of the Common Shares on the New York Stock Exchange on such date, was approximately $926.3 million.

As of February 25, 2010, there were 63,684,663 Common Shares of Benchmark Electronics, Inc., par value $0.10 per share, outstanding.
 
Documents Incorporated by Reference:
 
Portions of the Company’s Proxy Statement for the 2010 Annual Meeting of Shareholders (Part III, Items 10-14).
 

 
TABLE OF CONTENTS
 
Page
 
     
     
 
 
 
 
 
 
     
     
74
 
 
     
     
 
 
2

 


Background

Benchmark Electronics, Inc. (Benchmark), formerly named Electronics, Inc., began operations in 1979 and was incorporated under Texas law in 1981 as a wholly owned subsidiary of Intermedics, Inc., a medical implant manufacturer based in Angleton, Texas. In 1986, Intermedics sold 90% of the outstanding common shares of the Company to Electronic Investors Corp., a corporation formed by Donald E. Nigbor, Steven A. Barton and Cary T. Fu. Mr. Fu is currently serving as our Chairman of the Board and Chief Executive Officer. In 1988, Electronic Investors Corp. was merged into Benchmark, and in 1990 we completed the initial public offering of our common shares.

General

We are a world-wide provider of integrated electronic manufacturing services. We provide our services to original equipment manufacturers (OEMs) of computers and related products for business enterprises, medical devices, industrial control equipment, testing and instrumentation products, and telecommunication equipment. The services that we provide are commonly referred to as electronics manufacturing services (EMS). We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to volume production and direct order fulfillment. We have recently added certain precision machining assets and capabilities to provide precision machining, metal joining and complex electro-mechanical manufacturing services. We also provide specialized engineering services, including product design, software development, industrial design, assembly automation, printed circuit board layout, prototyping and test development. We believe that we have developed strengths in the manufacturing process for large, complex, high-density printed circuit boards as well as the ability to manufacture high and low volume products in lower cost regions such as Brazil, China, Malaysia, Mexico, Romania and Thailand.

We believe that our global manufacturing presence increases our ability to be responsive to our customers’ needs by providing accelerated time-to-market and time-to-volume production of high quality products. These capabilities should enable us to build stronger strategic relationships with our customers and to become a more integral part of their operations. Our customers face challenges in planning, procuring and managing their inventories efficiently due to fluctuations in customer demand, product design changes, short product life cycles and component price fluctuations. We employ production management systems to manage their procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when needed basis. We are a significant purchaser of electronic components and other raw materials, and can capitalize on the economies of scale associated with our relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply, and return excess components. Our expertise in supply chain management and our relationships with suppliers across the supply chain enable us to reduce our customers’ cost of goods sold and inventory exposure.

We currently operate a total of 54 surface mount production lines (where electrical components are soldered directly onto printed circuit boards) at our domestic facilities and 73 surface mount production lines at our international facilities. Our worldwide facilities include 1.6 million square feet in our domestic facilities in Alabama, Arizona, California, Minnesota, New Hampshire, North Dakota, Oregon and Texas; and 1.5 million square feet in our international facilities in Brazil, China, Ireland, Malaysia, Mexico, the Netherlands, Romania, Singapore and Thailand.
 
3

 
Our capabilities have continued to grow through acquisitions and through internal expansion. In 2009, we added certain precision machining assets and capabilities in Arizona, California and Mexico through a business acquisition, and we leased a larger facility in Brasov, Romania that expanded our manufacturing capability in Eastern Europe. In 2008, we completed the construction of a new building in Suzhou, China and increased our China manufacturing capacity. In January 2007, we acquired Pemstar Inc. (Pemstar), a publicly traded EMS company headquartered in Rochester, Minnesota (the Merger). This acquisition expanded our customer base and added depth to our engineering and systems integration capabilities. Additionally, we expanded our relationships with certain customers during 2007 and added a new facility in Penang, Malaysia. With these acquisitions and expansions, our global operations now include 24 facilities in ten countries.

We believe our primary competitive advantages are our design, manufacturing, testing and supply chain management capabilities. We offer our customers flexible manufacturing solutions throughout the life cycle of their products. These solutions provide accelerated time-to-market, time-to-volume production, and reduced production costs. As a result of working closely with our customers and responding promptly to their needs, we have become an integral part of their operations.

Our Industry

The EMS industry experienced rapid change and growth over most of the past decade as an increasing number of OEMs outsourced their manufacturing requirements. In mid-2001 and again in late 2008, the industry’s revenue declined as a result of significant cut backs in its customers’ production requirements, which was consistent with overall global economic downturns. OEMs have continued to turn to outsourcing in order to reduce product cost, achieve accelerated time-to-market and time-to-volume production, access advanced design and manufacturing technologies, improve inventory management and purchasing power, and reduce their capital investment in manufacturing resources. Outsourcing enables OEMs to concentrate on what they believe to be their core strengths, such as new product definition, marketing and sales. In addition, the number of industries serviced by EMS providers and these providers’ market penetration in certain industries has increased in recent years. We believe further growth opportunities exist for EMS providers to penetrate the worldwide electronics markets. However, the recent global economic downturn has had a negative affect on demand for our customers’ products and thus adversely affected our sales.

Our Strategy

Our goal is to be the EMS outsourcing provider of choice to leading OEMs in the electronics industry that we perceive from time to time to offer the greatest potential for growth. To meet this goal, we have implemented the following strategies:

 
·
Maintain and Develop Close, Long-Term Relationships with Customers. Our core strategy is to maintain and establish long-term relationships with leading OEMs in expanding industries by becoming an integral part of our customers’ manufacturing operations. To accomplish this, we work closely with our customers throughout the design, manufacturing and distribution process, and we offer flexible and responsive services. We rely on our local management teams to respond to frequently changing customer design specifications and production requirements, which develops stronger customer relationships.
 
4

 
 
·
Focus on High-End Products in Growth Industries. EMS providers produce products for a wide range of OEMs in different industries, such as consumer electronics, Internet-focused businesses and information technology equipment. The product scope ranges from easy to assemble, low-cost high-volume products targeted for the consumer market to complicated state-of-the-art, mission critical electronic hardware targeted for military, medical and other high-end computer use. Similarly, OEMs’ customers range from consumer-oriented companies that compete primarily on price and redesign their products every year to manufacturers of high-end telecommunications equipment and computer and related products for business enterprises that compete on technology and quality. We currently offer state-of-the-art products for industry leaders who require specialized engineering design and production services, as well as high volume manufacturing capabilities to our customer base. Our ability to offer both of these types of services enables us to expand our business relationships.

 
·
Deliver Complete High and Low Volume Manufacturing Solutions Globally. We believe OEMs are increasingly requiring a wide range of specialized engineering and manufacturing services from EMS providers in order to reduce costs and accelerate their time-to-market and time-to-volume production. Building on our integrated engineering and manufacturing capabilities, we offer services from initial product design and test to final product assembly and distribution to OEM customers. Our systems integration assembly and direct order fulfillment services allow our customers to reduce product cost and risk of product obsolescence by reducing their total work-in-process and finished goods inventory. These services are available at many of our manufacturing locations. In 2009, we added certain precision machining assets and capabilities to provide precision machining, metal joining and complex electro-mechanical manufacturing services in Arizona, California and Mexico. We also offer our customers high volume production in low cost regions of the world, such as Brazil, China, Malaysia, Mexico, Romania and Thailand. These full service capabilities allow us to offer customers the flexibility to move quickly from design and initial product introduction to production and distribution. We offer our customers the opportunity to combine the benefits of low cost manufacturing (for the portions of their products or systems that can benefit from the use of these geographic areas) with the benefits and capabilities of our higher complexity support of systems integration in Asia, Europe or the United States.

 
·
Leverage Advanced Technological Capabilities. In addition to traditional strengths in manufacturing large, complex high-density printed circuit boards we offer customers advanced design, technology and manufacturing solutions for their primary products. We provide this engineering expertise through our design capabilities in each of our facilities, and in our design centers. We believe our capabilities help our customers improve product performance and reduce costs.

 
·
Continue to Seek Cost Savings and Efficiency Improvements. We seek to optimize our facilities to provide cost-efficient services for our customers. We provide operations in lower cost locations, including Brazil, China, Malaysia, Mexico, Romania and Thailand, and we continue to expand our presence in these lower cost locations to meet the needs of our customers.

 
·
Continue Our Global Expansion. A network of strategically positioned facilities can reduce costs, simplify and shorten an OEM’s supply chain and thus reduce the time it takes to bring product to market. We are committed to geographic expansion in order to support our customers with cost-effective and timely delivery of quality products and services worldwide. Our acquisition of facilities in Malaysia, Romania and the Netherlands has expanded our service scope to provide a global manufacturing solution to our customers through our 24 facilities in ten countries located in Brazil, China, Ireland, Malaysia, Mexico, the Netherlands, Romania, Singapore, Thailand and the United States.
 
5

 
 
·
Pursue Strategic Acquisitions. Our capabilities have continued to grow through acquisitions and we will continue to selectively seek acquisition opportunities. Our acquisitions have enhanced our business in the following ways:

 
-
expanded geographic presence;
 
-
enhanced customer growth opportunities;
 
-
developed strategic relationships;
 
-
broadened service offerings;
 
-
diversified into new market sectors; and
 
-
added experienced management teams.

We believe that growth by selective acquisitions is critical for achieving the scale, flexibility and breadth of customer services required to remain competitive in the EMS industry.

Services We Provide

We offer a wide range of engineering, automation, test, manufacturing and fulfillment solutions that support our customers’ products from initial design through prototyping, design validation, testing, ramp to volume production, worldwide distribution and aftermarket support. We support all of our service offerings with supply chain management systems, superior quality program management and sophisticated information technology systems. Our comprehensive service offerings enable us to provide a complete solution for our customers’ outsourcing requirements.

Engineering Solutions
Our approach is to coordinate and integrate our design, prototype and other engineering capabilities. Through this approach, we provide a broad range of engineering services and, in some cases, dedicated production lines for prototypes. These services strengthen our relationships with manufacturing customers and attract new customers requiring specialized engineering services.

 
·
New Product Design, Prototype, Test and Related Engineering Solutions. We offer a full spectrum of new product design, prototype, test and related engineering solutions. Our concurrent engineering approach shortens product development cycles and gives our customers a competitive advantage in time-to-market and time-to-profit. Our multi-disciplined engineering teams provide expertise in a number of core competencies critical to serving OEMs in our target markets, including award-winning industrial design, mechanical and electrical hardware, firmware, software and systems integration and support. We create specifications, designs and quick-turn prototypes, and validate and ramp our customers’ products into high volume manufacturing.

 
·
Custom Test and Automation Equipment Design and Build Solutions. We provide our customers with a comprehensive range of custom automated test equipment, functional test equipment, process automation and replication solutions. We have expertise in tooling, testers, equipment control, systems planning, automation, floor control, systems integration, replication and programming. Our custom functional test equipment, process automation and replication solutions are available to our customers as part of our full service product design and manufacturing solutions package or on a stand-alone basis for products designed and manufactured elsewhere. We also provide custom test equipment and automation system solutions to OEMs. Our ability to provide these solutions allows us to capitalize on OEMs’ increasing needs for custom manufacturing solutions and provides an additional opportunity for us to introduce these customers to our comprehensive engineering and manufacturing services.
 
6

 
Manufacturing and Fulfillment Solutions
As OEMs seek to provide greater functionality in smaller products, they increasingly require more sophisticated manufacturing technologies and processes. Our investment in advanced manufacturing equipment and our experience in innovative packaging and interconnect technologies enable us to offer a variety of advanced manufacturing solutions. These packaging and interconnect technologies include:

 
·
Printed Circuit Board Assembly & Test. We offer a wide range of printed circuit board assembly and test solutions, including printed circuit board assembly, assembly of subsystems, circuitry and functionality testing of printed assemblies, environmental and stress testing and component reliability testing.

 
·
Flex Circuit Assembly & Test. We provide our customers with a wide range of flex circuit assembly and test solutions. We utilize specialized tooling strategies and advanced automation procedures to minimize circuit handling and ensure that consistent processing parameters are maintained throughout the assembly process.

 
·
Systems Assembly & Test. We work with our customers to develop product-specific test strategies. Our test capabilities include manufacturing defect analysis, in-circuit tests to test the circuitry of the board and functional tests to confirm that the board or assembly operates in accordance with its final design and manufacturing specifications. We either custom design test equipment and software ourselves or use test equipment and software provided by our customers. In addition, we provide environmental stress tests of assemblies of boards or systems.

We also have expertise in advanced precision and electromechanical technologies and optical manufacturing services. In order to meet our customers’ demand for systems assembly and test solutions, we offer subassembly build, final assembly, functionality testing, configuration and software installation and final packaging services.

Precision Electromechanical Assembly and Test. We offer a full spectrum of precision subsystem and system integration services. These services include assembly, configuration and test of complex computers and related products for business enterprises, medical devices, industrial control equipment, testing and instrumentation products, and telecommunication equipment. We design, develop and build product specific manufacturing processes utilizing manual, mechanized or fully automated lines to meet our customers’ product volume and quality requirements. All of our assembly and test processes are developed according to customer specifications and replicated within our facilities. Product life cycle testing services are provided such as Ongoing Reliability Testing where units are continuously cycled for extended testing while monitoring for early life failures.

Failure Analysis. We offer creative analytical solutions and expertise to challenging issues that face our customers. This includes focused techniques for failure mode, failure mechanism, and root cause determination. Specialized analytical skill sets associated with electrical, mechanical, and metallurgical disciplines are used in conjunction with a vast array of equipment such as ion chromatography, x-ray florescence, and scanning electron microscopy. Our state-of-the-art lab facilities provide customers detailed reporting and support in an unbiased, timely, and cost-effective manner. Mastering emerging technologies coupled with a complete understanding of potential failure mechanisms poises us to exceed customer expectations and maintain our technological diversity.
 
7

 
Direct Order Fulfillment. We provide direct order fulfillment for certain of our OEM customers. Direct order fulfillment involves receiving customer orders, configuring products to quickly fill the orders and delivering the products either to the OEM, a distribution channel or directly to the end customer. We manage our direct order fulfillment processes using a core set of common systems and processes that receive order information from the customer and provide comprehensive supply chain management, including procurement and production planning. These systems and processes enable us to process orders for multiple system configurations, and varying production quantities, including single units. Our direct order fulfillment services include build-to-order (BTO) and configure-to-order (CTO) capabilities. BTO involves building a complete system in real-time to a highly customized configuration ordered by the OEM customer. CTO involves configuring systems to an end customer’s specifications at the time the product is ordered. The end customer typically places this order by choosing from a variety of possible system configurations and options. We are capable of meeting a 2 to 24 hour turn-around-time for BTO and CTO. We support our direct order fulfillment services with logistics that include delivery of parts and assemblies to the final assembly site, distribution and shipment of finished systems, and processing of customer returns.

Aftermarket Non-Warranty Services. We provide our customers with a range of aftermarket non-warranty services, including repair, replacement, refurbishment, remanufacturing, exchange, systems upgrade and spare part manufacturing throughout a products life cycle. These services are tracked and supported by specific information technology systems that can be tailored to meet our customers’ individual requirements.

Value-Added Support Systems. We support our engineering, manufacturing, distribution and aftermarket support services with an efficient supply chain management system and a superior quality management program. All of our value-added support services are implemented and managed through web-based information technology systems that enable us to collaborate with our customers throughout all stages of the engineering, manufacturing and order fulfillment processes.
 
Supply Chain Management. Our inventory management and volume procurement capabilities contribute to cost reductions and reduce total cycle time. Our materials strategy is focused on leveraging our procurement volume company wide while providing local execution for maximum flexibility at the division level. In addition, our systems integration facilities have developed material processes required to support system integration operations.

We utilize a full complement of electronic data interchange transactions with our suppliers to coordinate forecasts, orders, reschedules, and inventory and component lead times. Our enterprise resource planning systems provide product and production information to our supply chain management, engineering change management and floor control systems. Our information systems also control serialization, production and quality data for all of our facilities around the world utilizing state-of-the-art statistical process control techniques for continuous process improvements. To enhance our ability to rapidly respond to changes in our customers’ requirements by effectively managing changes in our supply chain, we utilize web-based interfaces and real-time supply chain management software products which allow for scaling operations to meet customer needs, shifting capacity in response to product demand fluctuations, reducing materials costs and effectively distributing products to our customers or their end-customers.
 
8

 
Manufacturing Technologies. We offer our customers expertise in a wide variety of traditional and advanced manufacturing technologies. Our technical expertise supports standard printed circuit board assembly as well as complex products that require advanced engineering skills and equipment.
 
We also provide our customers with a comprehensive set of manufacturing technologies and solutions which include:
 
 
·
Pin Thru Hole;
 
·
Surface Mount Technology;
 
·
Fine Pitch;
 
·
Ball Grid Array;
 
·
Flip Chip;
 
·
Chip On Board/Wire bonding;
 
·
In-Circuit Test;
 
·
Board Level Functional Test; and
 
·
Stress Testing.

We also provide specialized solutions in support of Optical and Wireless components and systems which include:
 
 
·
Adhesives;
 
·
Conformal Coating;
 
·
Laser Welding;
 
·
Hybrid Optical/Electrical Printed Circuit Board Assembly and Test; and
 
·
Sub-micron Alignment of Optical Sub-Assemblies.

Through our Component Engineering Services, we are helping our customers deal with the changing international environmental regulations such as the European Union (EU) Restriction of the Use of Hazardous Substances in Electrical and Electronic Equipment (RoHS). Manufacturing sites in the Americas, Asia and European regions are certified in both water soluble and no-clean processes and are currently producing products that are RoHS compliant.

Precision Technologies. We provide precision machining, metal joining and complex electro-mechanical manufacturing services and utilize the following precision technologies:
 
 
·
Complex Small / Medium / Large Computer Numerical Controlled Machining;
 
·
Precision Multi-Axis Grinding of Aerospace Engine Blades, Vanes and Nozzles;
 
·
Precision Grinding of Mass Spectrometer Components;
 
·
Sinker Electrical Discharge Machining;
 
·
Turnkey Precision Clean Room Module Assembly and Functional Test; and
 
·
Major Electro-Mechanical Sub Assembly.
 
9

 
Marketing and Customers

We market our services primarily through a direct sales force and in select markets independent marketing representatives. In addition, our divisional and executive management teams are an integral part of our sales and marketing teams. We generally enter into supply arrangements with our customers. These arrangements, similar to purchase orders, generally govern the conduct of business between our customer and ourselves relating to, among other things, the manufacture of products which in many cases were previously produced by the customer itself. Such arrangements generally identify the specific products to be manufactured, quality and production requirements, product pricing and materials management. There can be no assurance that at any time these arrangements will remain in effect or be renewed.

Our key customer accounts are supported by a dedicated team, including a global account manager who is directly responsible for account management. Global account managers coordinate activities across divisions to effectively satisfy customer requirements and have direct access to our executive management to quickly address customer concerns. Local customer account teams further support the global teams and are linked by a comprehensive communications and information management infrastructure. In addition, our executive management, including our chief executive officer, Cary Fu, and our president, Gayla Delly, are heavily involved in customer relations and devote significant attention to broadening existing, and developing new, customer relationships.

The following table sets forth the percentages of our sales by industry for 2009, 2008 and 2007.
 
   
2009
   
2008
   
2007
 
Computers and related products for business enterprises
    39 %     48 %     53 %
Telecommunication equipment
    23       18       15  
Industrial control equipment
    20       16       13  
Medical devices
    14       14       13  
Testing and instrumentation products
    4       4       6  

Historically, a substantial percentage of our sales have been made to a small number of customers. The loss of a major customer, if not replaced, would adversely affect us. Sales to our largest customer, Oneida Nation Electronics, Inc. (who supports one of our customers in the computers and related products for business enterprises industry), represented 14% of our sales during 2009. Our future sales are dependent on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us.

Suppliers

We maintain a network of suppliers of components and other materials used in our operations. We procure components when a purchase order or forecast is received from a customer and occasionally utilize components or other materials for which a supplier is the single source of supply. If any of these single source suppliers were to be unable to provide these materials, a shortage of these components could temporarily interrupt our operations and lower our profits until such time as an alternate component could be identified and qualified for use. Although we experience component shortages and longer lead times for various components from time to time, we have generally been able to reduce the impact of the component shortages by working with customers to reschedule deliveries, by working with suppliers to provide the needed components using just-in-time inventory programs, or by purchasing components at somewhat higher prices from distributors, rather than directly from manufacturers. In addition, by developing long-term relationships with suppliers, we have been better able to minimize the effects of component shortages compared to manufacturers without such relationships. These procedures reduce, but do not eliminate, our inventory risk.
 
10

 
Backlog

We had sales backlog of approximately $1.2 billion at December 31, 2009, as compared to the 2008 year-end backlog of $1.6 billion. Backlog consists of purchase orders received, including, in some instances, forecast requirements released for production under customer contracts. Although we expect to fill substantially all of our year-end backlog during 2010, we currently do not have long-term agreements with all of our customers and customer orders can be canceled, changed or delayed by customers. The timely replacement of canceled, changed or delayed orders with orders from new customers cannot be assured, nor can there be any assurance that any of our current customers will continue to utilize our services. Because of these factors, our backlog is not a meaningful indicator of future financial results.

Competition

The electronics manufacturing services we provide are available from many independent sources as well as from the in-house manufacturing capabilities of current and potential customers. Our competitors include Celestica Inc., Flextronics International Ltd., Hon Hai Precision Industry Co., Ltd., Jabil Circuit, Inc., and Sanmina-SCI Corporation, who may be more established in the industry and have substantially greater financial, manufacturing or marketing resources than we do. We believe that the principal competitive factors in our targeted markets are engineering capabilities, product quality, flexibility, cost and timeliness in responding to design and schedule changes, reliability in meeting product delivery schedules, pricing, technological sophistication and geographic location.

In addition, in recent years, original design manufacturers (ODMs) that provide design and manufacturing services to OEMs have significantly increased their share of outsourced manufacturing services provided to OEMs in markets such as notebook and desktop computers, personal computer motherboards, and consumer electronic products. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

Governmental Regulation

Our operations, and the operations of businesses that we acquire, are subject to certain foreign, federal, state and local regulatory requirements relating to security clearance, environmental, waste management, and health and safety matters. We believe we operate in substantial compliance with all applicable requirements. However, material costs and liabilities may arise from these requirements or from new, modified or more stringent requirements, which could affect our earnings and competitive position. In addition, our past, current and future operations, and those of businesses we acquire, may give rise to claims of exposure by employees or the public or to other claims or liabilities relating to environmental, waste management or health and safety concerns.

We periodically generate and temporarily handle limited amounts of materials that are considered hazardous waste under applicable law. We contract for the off-site disposal of these materials and have implemented a waste management program to address related regulatory issues.

 
11

 
Employees

As of December 31, 2009, we employed 9,849 people, of whom 7,367 were engaged in manufacturing and operations, 1,156 in materials control and procurement, 529 in design and development, 274 in marketing and sales, and 523 in administration. None of our domestic employees are represented by a labor union. In certain international locations, our employees are represented by labor unions and by works councils. Some European countries also often have mandatory legal provisions regarding terms of employment, severance compensation and other conditions of employment that are more restrictive than U.S. laws. We have never experienced a strike or similar work stoppage and we believe that our employee relations are satisfactory.

Segments and International Operations

Benchmark has manufacturing facilities in the Americas, Asia and Europe regions to serve its customers. Benchmark is operated and managed geographically and management evaluates performance and allocates Benchmark’s resources on a geographic basis. We currently operate outside the United States in Brazil, China, Ireland, Malaysia, Mexico, the Netherlands, Romania, Singapore and Thailand. During 2009 and 2008, 47% and 48%, respectively, of our sales were from our international operations. As a result of customer demand overseas, we expect foreign sales to increase. Our foreign sales and operations are subject to risk of doing business abroad, including fluctuations in the value of currency, export duties, import controls and trade barriers, including stoppages, longer payment cycles, burdens of complying with a wide variety of foreign laws and, in certain parts of the world, political instability. While, to date, these factors have not had a material adverse effect on Benchmark’s results of operations, there can be no assurances that there will not be an adverse impact in the future. See Note 9 and Note 13 of Notes to Consolidated Financial Statements in Item 8 of this report for segment and geographical information.

Available Information

Our internet address is http://www.bench.com. We make available free of charge through our internet website our filings with the Securities and Exchange Commission (SEC), including our annual reports on Form 10–K, quarterly reports on Form 10–Q, current reports on Form 8–K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act as soon as reasonably practicable after electronically filing such material with, or furnishing it to, the SEC. All reports we file with the SEC are also available free of charge via EDGAR through the SEC’s website at http://www.sec.gov or to read and copy at the SEC Public Reference Room located at 100 F Street, N.E., Washington, D.C. 20549. Information can be obtained on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

12

 

Continued adverse market conditions in the electronics industry could reduce our future sales and earnings per share.

The business environment in the electronics industry is challenging due to adverse worldwide economic conditions. There has been an erosion of global consumer confidence amidst concerns over declining asset values, inflation, volatility in energy costs, geopolitical issues, the availability and cost of credit, rising unemployment, and the stability and solvency of financial institutions, financial markets, businesses, and sovereign nations. These concerns have slowed global economic growth and have resulted in recessions in many countries, including in the United States, Europe and certain countries in Asia. These economic conditions have resulted, and may result in the future, in lower information technology spending by businesses, which in turn affects demand for our customers’ products and thus adversely affects our sales. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows.

If these economic conditions worsen, in addition to our customers or potential customers reducing or delaying orders, a number of other negative effects on our business could result, including the insolvency of key suppliers, which could result in production delays, shorter payment terms from suppliers due to reduced availability of credit default insurance in the market, the inability of customers to obtain credit, and the insolvency of one or more customers. Any of these effects could impact our ability to effectively manage inventory levels and collect receivables, increase our need for cash, and decrease our net revenue and profitability.

Shortages or price increases of components specified by our customers would delay shipments and adversely affect our profitability.

Substantially all of our sales are derived from electronics manufacturing services in which we purchase components specified by our customers. In the past, supply shortages have substantially curtailed production of all assemblies using a particular component. In addition, industry-wide shortages of electronic components, particularly of memory and logic devices, have occurred. If shortages of these components occur or if components received are defective, we may be forced to delay shipments, which could have an adverse effect on our profit margins. Decreases in order activity in the first half of 2009 for the major electronic component suppliers resulted in cutbacks of manufacturing capacity. When demand started to recover in the third quarter of 2009, the supply base initiated actions to expand manufacturing capacity back to current levels of demand. This resulted in the elongation of the lead time for certain components over the latter part of the third and fourth quarter of 2009. Because of the continued increase in demand for surface mount components, we anticipate component shortages and longer lead times for certain components to occur from time to time. Also, we typically bear the risk of component price increases that occur between periodic repricings during the term of a customer contract. Accordingly, certain component price increases could adversely affect our gross profit margins.

We are dependent on the success of our customers. When our customers experience a downturn in their business then we may be similarly affected.

We are dependent on the continued growth, viability and financial stability of our customers. Our customers are OEMs of:

 
·
computers and related products for business enterprises;
 
·
medical devices;
 
·
industrial control equipment;
 
·
testing and instrumentation products; and
 
·
telecommunication equipment.
 
13

 
Often, these industries are subject to rapid technological change, vigorous competition, short product life cycles and consequent product obsolescence. When our customers are adversely affected by these factors, we may be similarly affected.

The loss of a major customer would adversely affect us.

Historically, a substantial percentage of our sales have been made to a small number of customers. The loss of a major customer, if not replaced, would adversely affect us. During 2009, our largest customer represented 14% of our sales. Our future sales are dependent on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us.

We expect to continue to depend on the sales to our largest customers and any material delay, cancellation or reduction of orders from these customers or other significant customers would have a material adverse effect on our results of operations. In addition, we generate significant accounts receivables in connection with providing manufacturing services to our customers. If one or more of our customers were to become insolvent or otherwise unable to pay for the manufacturing services provided by us, our operating results and financial condition would be adversely affected.

Most of our customers do not commit to long-term production schedules, which makes it difficult for us to schedule production and achieve maximum efficiency of our manufacturing capacity.

The volume and timing of sales to our customers may vary due to:

 
·
variation in demand for our customers’ products;
 
·
our customers’ attempts to manage their inventory;
 
·
electronic design changes;
 
·
changes in our customers’ manufacturing strategy; and
 
·
acquisitions of or consolidations among customers.

Due in part to these factors, most of our customers do not commit to firm production schedules for more than one quarter in advance. Our inability to forecast the level of customer orders with certainty makes it difficult to schedule production and maximize utilization of manufacturing capacity. In the past, we have been required to increase staffing and other expenses in order to meet the anticipated demand of our customers. Anticipated orders from many of our customers have, in the past, failed to materialize or delivery schedules have been deferred as a result of changes in our customers’ business needs, thereby adversely affecting our results of operations. On other occasions, our customers have required rapid increases in production, which have placed an excessive burden on our resources. Such customer order fluctuations and deferrals have had a material adverse effect on us in the past, and we may experience such effects in the future. A business downturn resulting from any of these external factors could have a material adverse effect on our operating income. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this report.

Our customers may cancel their orders, change production quantities, delay production or change their sourcing strategy.

EMS providers must provide increasingly rapid product turnaround for their customers. We generally do not obtain firm, long-term purchase commitments from our customers and we continue to experience reduced lead-times in customer orders. Customers may cancel their orders, change production quantities, delay production or change their sourcing strategy for a number of reasons. The success of our customers’ products in the market affects our business. Cancellations, reductions, delays or changes in their sourcing strategy by a significant customer or by a group of customers could negatively impact our operating income.
 
14

 
In addition, we make significant decisions, including determining the levels of business that we will seek and accept, production schedules, component procurement commitments, personnel needs and other resource requirements, based on our estimate of customer requirements. The short-term nature of our customers’ commitments and the possibility of rapid changes in demand for their products reduces our ability to accurately estimate the future requirements of those customers.

On occasion, customers may require rapid increases in production, which can stress our resources and reduce operating margins. In addition, because many of our costs and operating expenses are relatively fixed, a reduction in customer demand can harm our gross profits and operating results. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this report.

We may encounter significant delays or defaults in payments owed to us by customers for products we have manufactured or components that are unique to particular customers.

We structure our agreements with customers to mitigate our risks related to obsolete or unsold inventory. However, enforcement of these contracts may result in material expense and delay in payment for inventory. If any of our significant customers become unable or unwilling to purchase such inventory, our business may be materially harmed. See Management’s Discussion and Analysis of Financial Condition and Results of Operations in Item 7 of this report.

Our international operations may be subject to certain risks.

We currently operate outside the United States in Brazil, China, Ireland, Malaysia, Mexico, the Netherlands, Romania, Singapore and Thailand. During 2009, 2008 and 2007, 47%, 48% and 43%, respectively, of our sales were from our international operations. These international operations may be subject to a number of risks, including:

 
·
difficulties in staffing and managing foreign operations;
 
·
political and economic instability (including acts of terrorism and outbreaks of war), which could impact our ability to ship and/or receive product;
 
·
unexpected changes in regulatory requirements and laws;
 
·
longer customer payment cycles and difficulty collecting accounts receivable;
 
·
export duties, import controls and trade barriers (including quotas);
 
·
governmental restrictions on the transfer of funds;
 
·
burdens of complying with a wide variety of foreign laws and labor practices;
 
·
fluctuations in currency exchange rates, which could affect component costs, local payroll, utility and other expenses; and
 
·
inability to utilize net operating losses incurred by our foreign operations to reduce our U.S. income taxes.

In addition, several of the countries where we operate have emerging or developing economies, which may be subject to greater currency volatility, negative growth, high inflation, limited availability of foreign exchange and other risks. These factors may harm our results of operations, and any measures that we may implement to reduce the effect of volatile currencies and other risks of our international operations may not be effective. In our experience, entry into new international markets requires considerable management time as well as start-up expenses for market development, hiring and establishing office facilities before any significant revenues are generated. As a result, initial operations in a new market may operate at low margins or may be unprofitable.

Our operations in certain foreign locations receive favorable income tax treatment in the form of tax holidays or other incentives. In the event that such tax holidays or other incentives are not extended, are repealed, or we no longer qualify for such programs, our taxes may increase, which would reduce our net income.
 
Additionally, certain foreign jurisdictions restrict the amount of cash that can be transferred to the U.S or impose taxes and penalties on such transfers of cash. To the extent we have excess cash in foreign locations that could be used in, or is needed by, our operations in the United States, we may incur significant penalties and/or taxes to repatriate these funds.
 
15

 
We operate in a highly competitive industry.

We compete against many providers of electronics manufacturing services. Certain of our competitors have substantially greater resources and more geographically diversified international operations than we do. Our competitors include large independent manufacturers such as Celestica Inc., Flextronics International Ltd., Hon Hai Precision Industry Co., Ltd., Jabil Circuit, Inc. and Sanmina-SCI Corporation. In addition, we may in the future encounter competition from other large electronic manufacturers that are selling, or may begin to sell, electronics manufacturing services.

We also face competition from the manufacturing operations of our current and future customers, who are continually evaluating the merits of manufacturing products internally against the advantages of outsourcing to electronics manufacturing services providers. In addition, in recent years, ODMs that provide design and manufacturing services to OEMs, have significantly increased their share of outsourced manufacturing services provided to OEMs in several markets, such as notebook and desktop computers, personal computer motherboards, and consumer electronic products. Competition from ODMs may increase if our business in these markets grows or if ODMs expand further into or beyond these markets.

During periods of recession in the electronics industry, our competitive advantages in the areas of quick turnaround manufacturing and responsive customer service may be of reduced importance to electronics OEMs, who may become more price sensitive. We may also be at a competitive disadvantage with respect to price when compared to manufacturers with lower cost structures, particularly those with more offshore facilities located where labor and other costs are lower.

We experience intense competition, which can intensify further as more companies enter the markets in which we operate, as existing competitors expand capacity and as the industry consolidates. The availability of excess manufacturing capacity at many of our competitors creates intense pricing and competitive pressure on the EMS industry as a whole and Benchmark in particular. To compete effectively, we must continue to provide technologically advanced manufacturing services, maintain strict quality standards, respond flexibly and rapidly to customers’ design and schedule changes and deliver products globally on a reliable basis at competitive prices. Our inability to do so could have an adverse effect on us.

The integration of acquired operations may pose difficulties for us.

Our capabilities have continued to grow through acquisitions and we may pursue additional acquisitions over time. These acquisitions involve risks, including:

 
·
integration and management of the operations;
 
·
retention of key personnel;
 
·
integration of purchasing operations and information systems;
 
·
retention of the customer base of acquired businesses;
 
·
management of an increasingly larger and more geographically disparate business; and
 
·
diversion of management’s attention from other ongoing business concerns.

Our profitability will suffer if we are unable to successfully integrate any acquisition and manage any future acquisitions that we might pursue, or if we do not achieve sufficient revenue to offset the increased expenses associated with these acquisitions.
 
16

 
We may experience fluctuations in quarterly results.

Our quarterly results may vary significantly depending on various factors, many of which are beyond our control. These factors include:

 
·
the volume of customer orders relative to our capacity;
 
·
customer introduction and market acceptance of new products;
 
·
changes in demand for customer products;
 
·
pricing and other competitive pressures;
 
·
the timing of our expenditures in anticipation of future orders;
 
·
our effectiveness in managing manufacturing processes;
 
·
changes in cost and availability of labor and components;
 
·
changes in our product mix;
 
·
changes in political and economic conditions; and
 
·
local factors and events that may affect our production volume, such as local holidays.

Additionally, as is the case with many high technology companies, a significant portion of our shipments typically occurs in the last few weeks of a quarter. As a result, our sales may shift from one quarter to the next, having a significant effect on reported results.

Our investments in auction rate securities are subject to risks which may cause losses and affect the liquidity of these investments.

As of December 31, 2009, we held $50.1 million (par value) of auction rate securities, classified as long-term investments, whose underlying assets were in guaranteed student loans backed by a U. S. Government agency and municipal issue bonds. These investments are of a high credit quality with primarily AAA type credit ratings because of the government agency guarantee and other insurance. Auction rate securities are adjustable rate debt instruments whose interest rates were intended to reset every 7 to 35 days through an auction process. Overall changes in the global credit and capital markets led to failed auctions for these securities beginning in early 2008. These failed auctions, in addition to overall global economic conditions, impacted the liquidity of these investments and resulted in our continuing to hold these securities beyond their typical auction reset dates. The market for these types of securities remains illiquid as of December 31, 2009. As a result, our ability to liquidate and fully recover the carrying value of our adjustable rate securities in the near term may be limited or not exist. If the issuers of these adjustable rate securities are unable to successfully close future auctions or their credit quality deteriorates, we may in the future be required to record an impairment charge on these investments. We may be required to wait until market stability is restored for these instruments or until the final maturity of the underlying notes (up to 40 years) to realize our investments’ recorded value. As of December 31, 2009, we had $4.4 million of unrealized losses on these securities that is recorded in other comprehensive loss. We estimated the fair value of each security using Level 3 inputs with the assistance of an independent valuation firm. We have not to date incurred any payment defaults on any maturing auction rate securities we hold.

Start-up costs and inefficiencies related to new or transferred programs can adversely affect our operating results and such costs may not be recoverable if such new programs or transferred programs are cancelled.

Start-up costs, the management of labor and equipment resources in connection with the establishment of new programs and new customer relationships, and the need to estimate required resources in advance can adversely affect our gross margins and operating results. These factors are particularly evident in the early stages of the life cycle of new products and new programs or program transfers and in the opening of new facilities. These factors also affect our ability to efficiently use labor and equipment. We are currently managing a number of new programs. Consequently, our exposure to these factors has increased. In addition, if any of these new programs or new customer relationships were terminated, our operating results could be harmed, particularly in the short term. We may not be able to recoup these start-up costs or replace anticipated new program revenues.
 
17

 
We are exposed to general economic conditions, which could have a material adverse impact on our business, operating results and financial condition.

Our business is cyclical and has experienced economic and industry downturns. If the economic conditions and demand for our customers’ products deteriorate, we may experience a material adverse impact on our business, operating results and financial condition.

In cases where the evidence suggests a customer may not be able to satisfy its obligation to us, we set up reserves in an amount we determine appropriate for the perceived risk. There can be no assurance that our reserves will be adequate to meet this risk. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional receivable and inventory reserves may be required.

We may be affected by consolidation in the electronics industry, which could create increased pricing and competitive pressures on our business.

Consolidation in the electronics industry could result in an increase in excess manufacturing capacity as companies seek to close plants or take other steps to increase efficiencies and realize synergies of mergers. The availability of excess manufacturing capacity could create increased pricing and competitive pressures for the electronics manufacturing services industry as a whole and our business in particular. In addition, consolidation could also result in an increasing number of very large electronics companies offering products in multiple sectors of the electronics industry. The growth of these large companies, with significant purchasing and marketing power, could also result in increased pricing and competitive pressures for us. Accordingly, industry consolidation could harm our business.

We are subject to the risk of increased taxes.

We base our tax position upon the anticipated nature and conduct of our business and upon our understanding of the tax laws of the various countries in which we have assets or conduct activities. Our tax position, however, is subject to review and possible challenge by taxing authorities and to possible changes in law. We cannot determine in advance the extent to which some jurisdictions may assess additional tax or interest and penalties on such additional taxes.

Several countries in which we are located allow for tax holidays or provide other tax incentives to attract and retain business. We have obtained holidays or other incentives where available. Our taxes could increase if certain tax holidays or incentives are retracted, or if they are not renewed upon expiration, or tax rates applicable to us in such jurisdictions are otherwise increased. In addition, further acquisitions may cause our effective tax rate to increase.
 
18

 
We are exposed to intangible asset risk; our goodwill may become further impaired.

We have recorded intangible assets, including goodwill, in connection with business acquisitions. We are required to perform goodwill and intangible asset impairment tests at least on an annual basis and whenever events or circumstances indicate that the carrying value may not be recoverable from estimated future cash flows. Our annual goodwill impairment analysis in the fourth quarter of 2008 indicated there was an impairment of goodwill in two of our reporting segments, the Americas and Europe, primarily due to a decline in our market capitalization and market turmoil. Accordingly, we recorded a non-cash impairment charge in the fourth quarter of 2008 totaling $247.5 million. A further significant and sustained decline in our market capitalization could result in material charges in future periods that could be adverse to our operating results and financial position. As of December 31, 2009, we had $37.9 million in goodwill and $22.9 million of identifiable intangible assets. See Note 1(i) to the consolidated financial statements in Item 8 of this report.

There are inherent uncertainties involved in estimates, judgments and assumptions used in the preparation of financial statements in accordance with US GAAP. Any changes in estimates, judgments and assumptions could have a material adverse effect on our financial position and results of operations.

The consolidated financial statements included in the periodic reports we file with the SEC are prepared in accordance with accounting principles generally accepted in the United States (US GAAP). The preparation of financial statements in accordance with US GAAP involves making estimates, judgments and assumptions that affect reported amounts of assets (including intangible assets), liabilities and related reserves, revenues, expenses and income. Estimates, judgments and assumptions are inherently subject to change in the future, and any such changes could result in corresponding changes to the amounts of assets, liabilities, revenues, expenses and income. Any such changes could have a material adverse effect on our financial position and results of operations.

We are involved in various legal proceedings.

In the past, we have been notified of claims relating to various matters including intellectual property rights, contractual matters or other issues arising in the ordinary course of business. In the event of such a claim, we may be required to spend a significant amount of money to defend or otherwise address the claim. Any litigation, even where a claim is without merit, could result in substantial costs and diversion of resources. Accordingly, the resolution or adjudication of such disputes, even those encountered in the ordinary course of business, could have a material adverse effect on our business, consolidated financial conditions and results of operations. See Note 15 to the consolidated financial statements in Item 8 of this report.

Our success will continue to depend to a significant extent on our key personnel.

We depend significantly on our executive officers and other key personnel, including, but not limited to, Cary T. Fu, Donald F. Adam and Gayla J. Delly. The unexpected loss of the services of any one of these executive officers would have an adverse effect on us.

We must maintain our technological and manufacturing process expertise.

The market for our manufacturing services is characterized by rapidly changing technology and continuing process development. We are continually evaluating the advantages and feasibility of new manufacturing processes. We believe that our future success will depend upon our ability to develop and provide manufacturing services which meet our customers’ changing needs. This requires that we maintain technological leadership and successfully anticipate or respond to technological changes in manufacturing processes on a cost-effective and timely basis. Our failure to maintain our technological and manufacturing process expertise could have a material adverse effect on our business.
 
19

 
Our stock price is volatile.

Our common shares have experienced significant price volatility, and such volatility may continue in the future. The price of our common shares could fluctuate widely in response to a range of factors, including variations in our reported financial results and changing conditions in the economy in general or in our industry in particular. In addition, stock markets generally experience significant price and volume volatility from time to time which may affect the market price of our common shares for reasons unrelated to our performance.

Provisions in our shareholder rights plan, our charter documents and state law may make it harder for others to obtain control of our company even though some shareholders might consider such a development to be favorable.

Our shareholder rights plan, which was amended in December 2008, provisions of our amended and restated articles of incorporation and the Texas Business Corporation Act may delay, inhibit or prevent someone from gaining control of our company through a tender offer, business combination, proxy contest or some other method. These provisions include:

 
·
a “poison pill” shareholder rights plan;
 
·
a statutory restriction on the ability of shareholders to take action by less than unanimous written consent; and
 
·
a statutory restriction on business combinations with some types of interested shareholders.

Compliance or the failure to comply with governmental regulations could cause us significant expense.

We are subject to a variety of federal, state, local and foreign environmental laws and regulations relating to environmental, waste management, and health and safety concerns, including the handling, storage, discharge and disposal of hazardous materials used in or derived from our manufacturing processes. If we or companies we acquire have failed or fail in the future to comply with such laws and regulations, then we could incur liabilities and fines and our operations could be suspended. Such laws and regulations could also restrict our ability to modify or expand our facilities, could require us to acquire costly equipment, or could impose other significant expenditures. In addition, our operations may give rise to claims of property contamination or human exposure to hazardous chemicals or conditions.

Our worldwide operations are subject to local laws and regulations. Over the last several years, we have become subject to the RoHS directive and the Waste Electrical and Electronic Equipment Directive. These directives restrict the distribution of products within the EU containing certain substances, including lead, and require a manufacturer or importer to recycle products containing those substances. In addition, China has recently passed the Management Methods for Controlling Pollution by Electronic Information Products, which will eventually prohibit the import of products for use in China that contain substances similar to those banned by the RoHS directive.

Both directives affect the worldwide electronics, and electronics components, industries as a whole. If we or our customers fail to comply with such laws and regulations, we could incur liabilities and fines and our operations could be suspended.

In addition, as global warming issues become more prevalent, the U.S. and foreign governments are beginning to respond to these issues. This increasing governmental focus on global warming may result in new environmental regulations that may negatively affect us, our suppliers and our customers. This could cause us to incur additional direct costs in complying with any new environmental regulations, as well as increased indirect costs resulting from our customers, suppliers or both incurring additional compliance costs that get passed on to us. These costs may adversely impact our operations and financial condition.

20


Our business may be impacted by geopolitical events.

As a global business, we operate and have customers located in many countries. Geopolitical events such as terrorist acts may effect the overall economic environment and negatively impact the demand for our customers’ products or our ability to ship and/or receive products. As a result, customer orders may be lower and our financial results may be adversely affected.

Our business may be impacted by natural disasters.

Some of our facilities, including our corporate headquarters, are located in areas which may be impacted by hurricanes, earthquakes, water shortages, tsunamis, floods, typhoons, fires, extreme weather conditions and other natural or manmade disasters. Our insurance coverage with respect to natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate, or may not continue to be available at commercially reasonable rates and terms.

We may be exposed to interest rate fluctuations.

We will have exposure to interest rate risk under our variable rate revolving credit facilities to the extent we incur indebtedness under such facilities. These facilities’ interest rates are based on the spread over the bank’s LIBOR rate or its prime rate. We are also exposed to interest rate risk on our invested cash balances.

Changes in financial accounting standards or policies have affected, and in the future may affect, our reported financial condition or results of operations. Additionally, changes in securities laws and regulations have increased, and are likely to continue to increase, our operating costs.

We prepare our financial statements in conformity with US GAAP. These principles are subject to interpretation by the Financial Accounting Standards Board (FASB), the American Institute of Certified Public Accountants (AICPA), the SEC and various bodies formed to interpret and create appropriate accounting policies. A change in those policies can have a significant effect on our reported results and may affect our reporting of transactions which are completed before a change is announced. Changes to those rules or the questioning of how we interpret or implement those rules may have a material adverse effect on our reported financial results or on the way we conduct business. For example, although not yet currently required, we could be required to adopt International Financial Reporting Standards (IFRS) which is different than US GAAP.

In addition, in connection with our Section 404 certification process, we may identify from time to time deficiencies in our internal controls. Any material weakness or deficiency in our internal controls over financial reporting could materially and negatively impact our reported financial results and the market price of our stock could significantly decline. Additionally, adverse publicity related to the disclosure of a material weakness or deficiency in internal controls over financial reporting could have a negative impact on our reputation, business and stock price.


On November 30, 2009, the Company received a letter from the SEC’s Division of Corporation Finance in connection with its review of the Company’s Form 10-K for the fiscal year ended December 31, 2008, which was filed with the SEC on February 27, 2009. The Company responded to that letter and subsequently received an additional letter from the SEC. Several of the Staff’s comments requested more robust disclosure which as been incorporated into this document. We are currently awaiting the completion of the SEC’s review of our response to their most recent letter. The Company will continue to work with the SEC to resolve any outstanding comments.
 
21

 

Our customers market numerous products throughout the world and therefore need to access manufacturing services on a global basis. To enhance our EMS offerings, we seek to locate our facilities either near our customers and our customers’ end markets in major centers for the electronics industry or, where appropriate, in lower cost locations. Many of our plants located near customers and their end markets are focused primarily on final system assembly and test, while plants located in lower cost areas are engaged primarily in less complex component and subsystem manufacturing and assembly.

The following chart summarizes our principal manufacturing facilities owned or leased by Benchmark and its subsidiaries:
 
Location
 
Sq. Ft.
 
Ownership
         
Almelo, the Netherlands
    132,000  
Leased
Angleton, Texas
    109,000  
Owned
Austin, Texas
    93,000  
Leased
Ayudhaya, Thailand
    243,000  
Owned
Ayudhaya, Thailand
    180,000  
Owned
Beaverton, Oregon
    77,000  
Leased
Brasov, Romania
    108,000  
Leased
Campinas, Brazil
    40,000  
Leased
Concord, California
    80,000  
Leased
Dublin, Ireland
    46,000  
Leased
Dunseith, North Dakota
    47,000  
Owned
Dunseith, North Dakota
    53,000  
Leased
Freemont, California
    52,000  
Leased
Guadalajara, Mexico
    150,000  
Leased
Guaymas, Mexico
    52,000  
Leased
Hudson, New Hampshire
    170,000  
Leased
Huntsville, Alabama
    276,000  
Owned
Huntsville, Alabama
    144,000  
Leased
Korat, Thailand
    126,000  
Owned
Penang, Malaysia
    103,000  
Owned
Rochester, Minnesota
    260,000  
Leased
Suzhou, China
    250,000  
Owned
Singapore
    48,000  
Leased
Tempe, Arizona
    48,000  
Leased
Winona, Minnesota
    199,000  
Owned
           
Total
    3,086,000    
           

We lease other facilities in the U.S. with a total of 41,000 sq. ft. that house individuals that provide engineering services. We also own facilities with a total of 396,000 sq. ft. and lease facilities with a total of 137,000 sq. ft. that are currently not in operation. These facilities are both in the U.S. and abroad. Our leased facility in Beaverton, Oregon with a total of 77,000 sq. ft. is scheduled to close by the end of the second quarter of 2010.
 
22

 

We are involved in various legal actions arising in the ordinary course of business. In the opinion of management, the ultimate disposition of these matters will not have a material adverse effect on our consolidated financial position or results of operations.


 


Our common shares are listed on the New York Stock Exchange under the symbol “BHE.” The following table shows the high and low sales prices for our common shares as reported on the New York Stock Exchange for the quarters (or portions thereof) indicated.
 
   
High
   
Low
 
2010
           
    First quarter (through February 25, 2010)
  $ 20.68     $ 17.67  
2009
               
    Fourth quarter
  $ 19.81     $ 16.42  
    Third quarter
  $ 18.34     $ 13.42  
    Second quarter
  $ 14.98     $ 10.77  
    First quarter
  $ 13.60     $ 8.60  
2008
               
    Fourth quarter
  $ 14.36     $ 8.75  
    Third quarter
  $ 19.11     $ 13.88  
    Second quarter
  $ 18.97     $ 16.22  
    First quarter
  $ 19.98     $ 14.90  

The last reported sale price of our common shares on February 25, 2010, as reported by the New York Stock Exchange, was $20.11. There were approximately 1,023 record holders of our common shares as of February 25, 2010.

We have not paid any cash dividends on our common shares in the past. In addition, our credit facility includes restrictions on the amount of dividends we may pay to shareholders. We currently expect to retain future earnings for use in the operation and expansion of our business and do not anticipate paying cash dividends in the foreseeable future.
 
23

 
 
Issuer Purchases of Equity Securities
The following table provides information about the Company’s repurchases of its equity securities that are registered pursuant to Section 12 of the Exchange Act during the quarter ended December 31, 2009, at a total cost of $17.9 million:
 
                   
(d) Maximum
               
(c) Total
 
Number (or
               
Number of
 
Approximate
               
Shares (or
 
Dollar Value)
               
Units)
 
of Shares (or
               
Purchased as
 
Units) that
   
(a) Total
         
Part of
 
May Yet Be
   
Number of
   
(b) Average
   
Publicly
 
Purchased
   
Shares (or
   
Price Paid per
   
Announced
 
Under the
   
Units)
   
Share (or
   
Plans or
 
Plans or
   
Purchased (1)
   
Unit) (2)
   
Programs
 
Programs (3)
October 1 to 31, 2009
    330,000     $ 18.00       330,000  
62.2 million
November 1 to 30, 2009
    317,533     $ 17.91       317,533  
56.5 million
December 1 to 31, 2009
    330,000     $ 18.91       330,000  
50.3 million
Total
    977,533     $ 18.28       977,533    
 
(1) All share repurchases were made on the open market.

(2) Average price paid per share is calculated on a settlement basis and excludes commission.

(3) On July 24, 2008, the Board of Directors of the Company approved the repurchase of up to $100 million of the Company’s outstanding common shares. Purchases under the plan commenced on July 28, 2008. Share purchases may be made in the open market, in privately negotiated transactions or block transactions, at the discretion of the Company’s management and as market conditions warrant. Purchases will be funded from available cash and may be commenced, suspended or discontinued at any time without prior notice. Shares repurchased under the program will be retired.

During the year ended December 31, 2009, the Company repurchased a total of 1,671,588 common shares for $27.9 million at an average price of $16.67 per share. All share purchases were made in the open market and the shares repurchased through December 31, 2009 were retired.
 
24

 
Performance Graph
The following Performance Graph compares the cumulative total shareholder return on our common shares for the five-year period commencing December 31, 2004 and ending December 31, 2009, with the cumulative total return of the Standard & Poor’s 500 Stock Index (which does not include Benchmark), and the Peer Group Index, which is composed of Celestica Inc., Suntron Corp, Flextronics International, Ltd., Jabil Circuit, Inc., Plexus Corp and Sanmina-SCI Corp. Dividend reinvestment has been assumed.


 
   
Dec-04
   
Dec-05
   
Dec-06
   
Dec-07
   
Dec-08
   
Dec-09
 
Benchmark Electronics, Inc.
  $ 100.00     $ 98.60     $ 107.20     $ 78.00     $ 56.20     $ 83.20  
Peer Group
  $ 100.00     $ 89.30     $ 77.80     $ 66.90     $ 22.30     $ 56.40  
S&P 500
  $ 100.00     $ 103.00     $ 117.00     $ 121.20     $ 74.50     $ 92.00  
 
NOTES: Assumes $100 invested on December 31, 2004 in Benchmark Electronics, Inc. Common Shares, in the S&P 500, and in the Peer Group Index. Reflects month-end dividend reinvestment, and annual reweighting of the Peer Group Index portfolios.
 
25

 
 
   
Year Ended December 31,
 
(in thousands, except per share data)
 
2009
   
2008
   
2007
   
2006
   
2005
 
Selected Statements of Income (Loss) Data
                         
Sales
  $ 2,089,253     $ 2,590,167     $ 2,915,919     $ 2,907,304     $ 2,257,225  
Cost of sales
    1,942,674       2,414,231       2,717,425       2,708,144       2,095,623  
    Gross profit
    146,579       175,936       198,494       199,160       161,602  
Selling, general and administrative
                                       
  expenses
    85,500       92,154       96,614       70,109       62,322  
Restructuring charges and
                                       
  integration costs (1)
    8,264       2,780       11,581       4,723        
Goodwill impairment (2)
          247,482                    
Income (loss) from operations
    52,815       (166,480 )     90,299       124,328       99,280  
Interest expense
    (1,399 )     (1,455 )     (2,183 )     (354 )     (330 )
Interest income
    2,210       8,675       11,217       8,824       7,786  
Other income (expense)
    (1,705 )     1,772       693       (2,214 )     (922 )
Income tax benefit (expense) (3)
    1,974       21,856       (7,670 )     (19,762 )     (25,225 )
    Net income (loss)
  $ 53,895     $ (135,632 )   $ 92,356     $ 110,822     $ 80,589  
Earnings (loss) per share: (4)
                                       
    Basic
  $ 0.83     $ (2.02 )   $ 1.28     $ 1.72     $ 1.29  
    Diluted
  $ 0.83     $ (2.02 )   $ 1.27     $ 1.70     $ 1.25  
Weighted-average number of
                                       
  shares outstanding:
                                       
    Basic
    64,758       67,060       72,061       64,306       62,682  
    Diluted
    65,116       67,060       72,829       65,121       64,279  
     
December 31,
 
(in thousands)
 
2009
   
2008(5)
   
2007(5)
   
2006(5)
   
2005(5)
 
Selected Balance Sheet Data
                                       
Working capital (5)
  $ 859,095     $ 813,876     $ 879,263     $ 755,011     $ 640,482  
Total assets (5)
    1,465,720       1,433,040       1,756,967       1,400,239       1,292,527  
Total debt
    11,681       11,939       12,526              
Shareholders’ equity (5)
  $ 1,090,903     $ 1,050,574     $ 1,283,367     $ 979,459     $ 840,238  

(1)
See Note 16 to the Consolidated Financial Statements for a discussion of the restructuring charges and integration costs occurring in 2009, 2008 and 2007. During 2006, the Company recognized restructuring charges totaling $4.7 million related to reductions in workforce and the resizing and closure of certain facilities.
(2)
During the fourth quarter of 2008, the Company recorded a non-cash goodwill impairment charge totaling $247.5 million. See Note 1(i) to the Consolidated Financial Statements for a discussion of the impairment charge.
(3)
During the third quarter of 2009, the Company recorded a $2.7 million discrete tax benefit related to a previously closed facility, a $2.4 million tax benefit related to a revaluation loss in Mexico and a $1.2 million tax benefit related to intercompany pricing deductions. During the third quarter of 2008, the Company recorded a $3.4 million discrete tax benefit related to a previously closed facility. During the third quarter of 2007, the Company recorded a $6.5 million discrete tax benefit related to a previously closed facility. During the first quarter of 2006, the Company recorded a $4.8 million tax benefit for the write-off of the investment in the Leicester, England subsidiary.
(4)
See Note 1(j) to the Consolidated Financial Statements for the basis of computing earnings (loss) per share.
(5)
See Note 1(r) to the Consolidated Financial Statements for a discussion of the correction of an immaterial error related to deferred income taxes.
 
26

 

References in this report to “the Company,” “Benchmark,” “we,” or “us” mean Benchmark Electronics, Inc. together with its subsidiaries. The following Management’s Discussion and Analysis of Financial Condition and Results of Operations contains certain forward-looking statements within the meaning of Section 27A of the Securities Act of 1933, as amended and Section 21E of the Securities Exchange Act of 1934, as amended. These forward-looking statements are identified as any statement that does not relate strictly to historical or current facts. They use words such as “anticipate,” “believe,” “intend,” “plan,” “projection,” “forecast,” “strategy,” “position,” “continue,” “estimate,” “expect,” “may,” “will,” or the negative of those terms or other variations of them or comparable terminology. In particular, statements, express or implied, concerning future operating results or the ability to generate sales, income or cash flow are forward-looking statements. Forward-looking statements are not guarantees of performance. They involve risks, uncertainties and assumptions, including those discussed under Item 1A of this report. The future results of our operations may differ materially from those expressed in these forward-looking statements. Many of the factors that will determine these results are beyond our ability to control or predict. Undue reliance should not be placed on any forward-looking statements. Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual outcomes may vary materially from those indicated.

The following discussion should be read in conjunction with the Consolidated Financial Statements and Notes thereto in Item 8 of this report.

OVERVIEW

We are a world-wide provider of integrated electronic manufacturing services. We provide our services to original equipment manufacturers (OEMs) of computers and related products for business enterprises, medical devices, industrial control equipment, testing and instrumentation products, and telecommunication equipment. The services that we provide are commonly referred to as electronics manufacturing services (EMS). We offer our customers comprehensive and integrated design and manufacturing services, from initial product design to volume production and direct order fulfillment. Our manufacturing and assembly operations include printed circuit boards and subsystem assembly, box build and systems integration, the process of integrating subsystems and, often, downloading and integrating software, to produce a fully configured product. We have recently added precision mechanical manufacturing capabilities to compliment our proven electronic manufacturing expertise. We also are able to provide specialized engineering services, including product design, printed circuit board layout, prototyping, and test development. We believe that we have developed strengths in the manufacturing process for large, complex, high-density printed circuit boards as well as the ability to manufacture high and low volume products in lower cost regions such as Brazil, China, Malaysia, Mexico, Romania and Thailand.

During the past several years, we have made the necessary changes to align our business operations with our customers’ demand. These changes include, among other activities, moving production between facilities, reducing staff levels, realigning our business processes and reorganizing our management. During the year ended December 31, 2009, the Company recognized $8.3 million (pre-tax) of restructuring charges, primarily related to capacity reduction in Europe and employee termination costs associated with the involuntary terminations of employees in connection with reductions in workforce of certain facilities worldwide. During the year ended December 31, 2008, the Company recognized $2.8 million (pre-tax) of restructuring charges, primarily employee termination costs associated with the involuntary terminations of employees in connection with reductions in workforce of certain facilities. During the year ended December 31, 2007, we incurred $4.7 million (pre-tax) of restructuring charges, primarily related to the closure of our Redmond, Washington facility, the transfer of the Company’s printed circuit board assembly (PCBA) operations in Dublin, Ireland to Brasov, Romania and the consolidation and resizing of certain other facilities, as we continued to expand our low-cost capacity while realigning and further strengthening our global footprint to support continued business opportunities. In connection with the acquisition of Pemstar Inc. (Pemstar) on January 8, 2007, a total of $7.0 million (pre-tax) in integration costs were incurred during the year ended December 31, 2007. These costs included redundant operating costs that have been eliminated.
 
27

 
We believe that our global manufacturing presence increases our ability to be responsive to our customers’ needs by providing accelerated time-to-market and time-to-volume production of high quality products. These capabilities should enable us to build stronger strategic relationships with our customers and to become a more integral part of their operations. Our customers face challenges in planning, procuring and managing their inventories efficiently due to customer demand fluctuations, product design changes, short product life cycles and component price fluctuations. We employ production management systems to manage their procurement and manufacturing processes in an efficient and cost-effective manner so that, where possible, components arrive on a just-in-time, as-and-when needed basis. We are a significant purchaser of electronic components and other raw materials, and can capitalize on the economies of scale associated with our relationships with suppliers to negotiate price discounts, obtain components and other raw materials that are in short supply, and return excess components. Our expertise in supply chain management and our relationships with suppliers across the supply chain enables us to reduce our customers’ cost of goods sold and inventory exposure.

We recognize revenue from the sale of circuit board assemblies, systems and excess inventory when title and risk of ownership have passed, the price to the buyer is fixed and determinable and collectibility is reasonably assured, which generally is when the goods are shipped. Revenue from design, development and engineering services is recognized when the services are performed and collectibility is reasonably certain. Such services provided under fixed price contracts are accounted for using the percentage of completion method. We assume no significant obligations after product shipment as we typically warrant workmanship only. Therefore, our warranty provisions are immaterial.

Our cost of sales includes the cost of materials, electronic components and other materials that comprise the products we manufacture, the cost of labor and manufacturing overhead, and adjustments for excess and obsolete inventory. Our procurement of materials for production requires us to commit significant working capital to our operations and to manage the purchasing, receiving, inspection and stocking of materials. Although we bear the risk of fluctuations in the cost of materials and excess scrap, we periodically negotiate cost of materials adjustments with our customers. Our gross margin for any product depends on the sales price, the proportionate mix of the cost of materials in the product and the cost of labor and manufacturing overhead allocated to the product. We typically have the potential to realize higher gross margins on products where the proportionate level of labor and manufacturing overhead is greater than that of materials. As we gain experience in manufacturing a product, we usually achieve increased efficiencies, which result in lower labor and manufacturing overhead costs for that product and higher gross margins. Our operating results are impacted by the level of capacity utilization of manufacturing facilities. Operating income margins have generally improved during periods of high production volume and high capacity utilization. During periods of low production volume, we generally have idle capacity and reduced operating income margins.

Summary of 2009 Results
Sales for the year ended December 31, 2009 decreased 19% to $2.1 billion compared to $2.6 billion in 2008 primarily as a result of the overall economic downturn that has been impacting businesses worldwide since mid 2008. The decline in sales has been broad based and impacted customers in three of the five industries that we serve when comparing 2009 to 2008. During the year ended December 31, 2009, sales to customers in the computers and related products for business enterprises industry, medical devices industry, and the testing and instrumentation products industry declined 33%, 24% and 17%, respectively, from 2008. Sales to our customers in the telecommunication equipment industry increased 3% from 2008 while sales to our customers in the industrial control equipment industry remained consistent when comparing periods. Sales to our customers in the computers and related products for business enterprises industry sector represented 39% of our sales in 2009 compared to 48% of our sales in 2008. Sales to this industry sector decreased $0.4 billion from $1.2 billion in 2008 to $0.8 billion in 2009 due to reduced demand.

28


Our future sales are dependent on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us. Adverse worldwide economic conditions have resulted, and may result in the future, in lower information technology spending by businesses, which in turn affects demand for our customers’ products and thus adversely affects our sales.

Our gross profit as a percentage of sales increased to 7.0% in 2009 from 6.8% in 2008 primarily due to a better product mix, operating efficiencies and an aggressive management of our costs. We experience fluctuations in gross profit from period to period. Different programs can contribute different gross profits depending on factors such as the types of services involved, location of production, size of the program, complexity of the product, and level of material costs associated with the various products. New programs can contribute relatively less to our gross profit in their early stages when manufacturing volumes are usually lower, resulting in inefficiencies and unabsorbed manufacturing overhead costs. In addition, new and higher volume programs remain subject to competitive constraints that could exert downward pressure on our margins. During periods of low production volume, we generally have idle capacity and reduced gross profit.

We have undertaken initiatives to restructure our business operations with the intention of improving utilization and realizing cost savings in the future. During the year ended December 31, 2009, the Company recognized $8.3 million (pre-tax) of restructuring charges, primarily related to capacity reduction in Europe and employee termination costs associated with the involuntary terminations of employees in connection with reductions in workforce of certain facilities worldwide.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES
 
Management’s discussion and analysis of financial condition and results of operations is based upon our consolidated financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. Our significant accounting policies are summarized in Note 1 to the Consolidated Financial Statements in Item 8 of this report. The preparation of these financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosure of contingent assets and liabilities. On an on-going basis, we evaluate our estimates, including those related to allowance for doubtful accounts, inventories, deferred taxes, impairment of long-lived assets, and contingencies and litigation. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results may differ materially from these estimates. We believe the following critical accounting policies affect our more significant judgments and estimates used in the preparation of our consolidated financial statements.

Allowance for doubtful accounts
Our accounts receivable balance is recorded net of allowances for amounts not expected to be collected from our customers. Because our accounts receivable are typically unsecured, we periodically evaluate the collectibility of our accounts based on a combination of factors, including a particular customer’s ability to pay as well as the age of the receivables. To evaluate a specific customer’s ability to pay, we analyze financial statements, payment history, third-party credit analysis reports and various information or disclosures by the customer or other publicly available information. In cases where the evidence suggests a customer may not be able to satisfy its obligation to us, we set up a specific allowance in an amount we determine appropriate for the perceived risk. If the financial condition of our customers were to deteriorate, resulting in an impairment of their ability to make payments, additional allowances may be required.
 
29


 
Inventory obsolescence reserve
We purchase inventory based on forecasted demand and record inventory at the lower of cost or market. We reserve for estimated obsolescence as necessary in an amount equal to the difference between the cost of inventory and estimated market value based on assumptions of future demands and market conditions. We evaluate our inventory valuation on a quarterly basis based on current and forecasted usage and the latest forecasts of product demand and production requirements from our customers. Customers frequently make changes to their forecasts, requiring us to make changes to our inventory purchases, commitments, and production scheduling and may require us to cancel open purchase commitments with our vendors. This process may lead to on-hand inventory quantities and on-order purchase commitments that are in excess of our customers’ revised needs, or parts that become obsolete before use in production. We record inventory reserves on excess and obsolete inventory. These reserves are established on inventory which we have determined that our customers are not responsible for or on inventory which we believe our customers will be unable to fulfill their obligation to ultimately purchase. If actual market conditions are less favorable than those we projected, additional inventory write-downs may be required.

Income Taxes
We estimate our income tax provision in each of the jurisdictions in which we operate, including estimating exposures related to uncertain tax positions. We must also make judgments regarding the ability to realize the deferred tax assets. We record a valuation allowance to reduce our deferred tax assets to the amount that is more likely than not to be realized. While we have considered future taxable income and ongoing prudent and feasible tax planning strategies in assessing the need for the valuation allowance, in the event we were to subsequently determine that we would be able to realize our deferred tax assets in excess of our net recorded amount, an adjustment to the valuation allowance would increase income in the period such determination was made. Similarly, should we determine that we would not be able to realize all or part of our net deferred tax assets in the future, an adjustment to the valuation allowance would reduce income in the period such determination was made.

We are subject to examination by tax authorities for varying periods in various U.S. and foreign tax jurisdictions. During the course of such examinations disputes occur as to matters of fact and/or law. Also, in most tax jurisdictions the passage of time without examination will result in the expiration of applicable statutes of limitations thereby precluding the taxing authority from conducting an examination of the tax period(s) for which such statute of limitations has expired. We believe that we have adequately provided for our tax liabilities.

Impairment of Long-Lived Assets
Long-lived assets, such as property, plant, and equipment, and purchased intangibles subject to amortization, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The recoverability of assets to be held and used is measured by a comparison of the carrying amount of an asset to the estimated undiscounted future cash flows expected to be generated by the asset. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge would be recognized by the amount that the carrying amount of the asset exceeds the fair value of the asset.

Goodwill is tested annually for impairment, and is tested for impairment more frequently if events and circumstances indicate that the asset might be impaired. An impairment loss would be recognized to the extent that the carrying amount exceeds the asset’s fair value. Goodwill is measured at the reporting unit level, which we have determined to be consistent with our operating segments as defined in Note 13 to the Consolidated Financial Statements in Item 8 of this report, by determining the fair values of the reporting units and comparing those fair values to the carrying values, including goodwill, of the reporting unit. We determined the fair value of our reporting units, with the assistance of an independent valuation firm, based upon a combination of the income approach (discounted cash flow method) and market approach (market comparable model) methodologies. In concluding on the fair value estimates of our reporting units, the income approach was given a 75% weighting and the market approach was given a 25% weighting based on the quality and suitability of information available in performing the income approach, relative to the market approach.
 
30

 
The income approach methodology utilized in estimating the fair value of our reporting units for purposes of the goodwill impairment testing required various judgmental assumptions about revenues, operating margins, growth rates, working capital requirements and appropriate discount rate. In determining those judgmental assumptions, we considered a variety of data, including—for each reporting unit—its annual budget for the upcoming year, its longer-term business plan, anticipated future cash flows, market data, and historical cash flow growth rates. The key assumptions used to estimate the fair value of our reporting units under the discounted cash flow method were (i) projected revenue growth over a ten-year period and the annual compounded average growth rate; (ii) projected operating margins over a ten year period; and (iii) a weighted-average cost of capital.

Under the market approach, the value of our reporting units was estimated by comparing it to publicly-traded firms in similar lines of business and geographic markets. The market approach takes into account, among other things, the market value of total invested capital to earnings before interest, taxes, depreciation and amortization (EBITDA) multiples of comparable companies adjusted to reflect differences in size and growth prospects. The selected multiples were then applied to the present value of our reporting unit’s projected EBITDA to arrive at an indicated range of value. This value was then adjusted for a control premium of 35% in 2009 and 25% in 2008 based on a review of premiums paid for companies similar in nature to our reporting units and then adjusted for any working capital requirement excess (deficit) to determine a final value under the market approach.

Changes in economic and operating conditions that occur after the annual impairment analysis or an interim impairment analysis, and that impact these assumptions, may result in a future goodwill impairment charge. Our annual goodwill impairment analysis as of December 31, 2008 indicated there was an impairment of goodwill in two of our reporting units, the Americas and Europe, primarily due to a decline in our market capitalization and recent market turmoil. Accordingly, we recorded a non-cash impairment charge in the fourth quarter of 2008 totaling $247.5 million. We estimated that the fair value of our Asia business segment exceeded its carrying amount by approximately 16% at the time our 2008 impairment test was performed. As of December 31, 2009, we had goodwill associated with our Asia business segment of approximately $37.9 million. We completed the annual impairment test during the fourth quarter of 2009 and determined that no impairment existed as of December 31, 2009. We estimated that the fair value of our Asia business segment exceeded its carrying amount by approximately 147% at the time our 2009 impairment test was performed. Circumstances that may lead to future impairment of goodwill include, but are not limited to, unforeseen decreases in future performance or industry demand, or the restructuring of our operations as a result of a change in our business strategy.

Stock-Based Compensation
We recognize stock-based compensation expense in our consolidated statements of income. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model. Option-pricing models require the input of subjective assumptions, including the expected life of the option and the expected stock price volatility. Judgment is also required in estimating the number of option awards that are expected to vest as a result of satisfaction of time-based vesting schedules. If actual results or future changes in estimates differ significantly from our current estimates, stock-based compensation could increase or decrease. See Note 1 to the Consolidated Financial Statements in Item 8 of this report.

Recently Enacted Accounting Principles
See Note 1 to the Consolidated Financial Statements in Item 8 of this report for a discussion of recently enacted accounting principles.
 
31

 
RESULTS OF OPERATIONS

The following table presents the percentage relationship that certain items in our Consolidated Statements of Income (Loss) bear to sales for the periods indicated. The financial information and the discussion below should be read in conjunction with the Consolidated Financial Statements and Notes thereto in Item 8 of this report.
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Sales
    100.0 %     100.0 %     100.0 %
Cost of sales
    93.0       93.2       93.2  
         Gross profit
    7.0       6.8       6.8  
Selling, general and administrative expenses
    4.1       3.6       3.3  
Restructuring charges and integration costs
    0.4       0.1       0.4  
Goodwill impairment
          9.6        
 Income (loss) from operations
    2.5       (6.4 )     3.1  
Other income, net
    (0.0 )     0.3       0.3  
         Income (loss) before income taxes
    2.5       (6.1 )     3.4  
Income tax benefit (expense)
    0.1       0.8       (0.3 )
         Net income (loss)
    2.6 %     (5.2 )%     3.2 %


Year Ended December 31, 2009 Compared With Year Ended December 31, 2008

Sales
Sales for the year ended December 31, 2009 decreased 19% to $2.1 billion compared to $2.6 billion in 2008 primarily as a result of the overall economic downturn that has been impacting businesses worldwide since mid 2008. The decline in sales has been broad based and impacted customers in three of the five industries that we serve when comparing 2009 to 2008. The following table sets forth the percentages of our sales by industry for 2009 and 2008.
 
   
2009
   
2008
 
Computers and related products for business enterprises
    39 %     48 %
Telecommunication equipment
    23       18  
Industrial control equipment
    20       16  
Medical devices
    14       14  
Testing and instrumentation products
    4       4  
      100 %     100 %

During the year ended December 31, 2009, sales to customers in the computers and related products for business enterprises industry, medical devices industry, and the testing and instrumentation products industry declined 33%, 24% and 17%, respectively, from 2008. Sales to our customers in the telecommunication equipment industry increased 3% from 2008 while sales to our customers in the industrial control equipment industry were essentially flat when comparing periods.

Sales to our customers in the computers and related products for business enterprises industry sector represented 39% of our sales in the 2009 compared to 48% of our sales in 2008. Sales to this industry sector decreased $0.4 billion from $1.2 billion in 2008 to $0.8 billion in 2009 due to reduced demand.
Our future sales are dependent on the success of our customers, some of which operate in businesses associated with rapid technological change and consequent product obsolescence. Developments adverse to our major customers or their products, or the failure of a major customer to pay for components or services, could have an adverse effect on us. Adverse worldwide economic conditions have impacted our customers. See Note 10 to the Consolidated Financial Statements in Item 8 of this report.
 
32

 
A substantial percentage of our sales have been made to a small number of customers, and the loss of a major customer, if not replaced, would adversely affect us. Sales to our largest customer, Oneida Nation Electronics, Inc. (who supports one of our customers in the computers and related products for business enterprises industry), represented 14% of our sales during 2009.

Our international operations are subject to the risks of doing business abroad. These risks have not had a material adverse effect on our results of operations through December 31, 2009. However, we can make no assurances that there will not be an adverse impact in the future. See Item 1A for factors pertaining to our international sales and fluctuations in the exchange rates of foreign currency and for further discussion of potential adverse effects in operating results associated with the risks of doing business abroad. During 2009 and 2008, 47% and 48%, respectively, of our sales were from our international operations.

We had a backlog of approximately $1.2 billion at December 31, 2009, as compared to the 2008 year-end backlog of $1.6 billion. Backlog consists of purchase orders received, including, in some instances, forecast requirements released for production under customer contracts. Although we expect to fill substantially all of our backlog at December 31, 2009 during 2010, we do not have long-term agreements with all of our customers and customer orders can be canceled, changed or delayed by customers. The timely replacement of canceled, changed or delayed orders with orders from new customers cannot be assured, nor can there be any assurance that any of our current customers will continue to utilize our services. Because of these factors, backlog is not a meaningful indicator of future financial results.

Gross Profit
Gross profit decreased 17% to $146.6 million for 2009 from $175.9 million in 2008 primarily as a result of a decrease in sales. Gross profit as a percentage of sales increased to 7.0% in 2009 from 6.8% during 2008 primarily due to a better product mix, operating efficiencies and aggressive management of our costs. We experience fluctuations in gross profit from period to period. Different programs contribute different gross profits depending on factors such as the types of services involved, location of production, size of the program, complexity of the product, and level of material costs associated with the various products. Moreover, new programs can contribute relatively less to our gross profit in their early stages when manufacturing volumes are usually lower, resulting in inefficiencies and unabsorbed manufacturing overhead costs. In addition, a number of our new and higher volume programs remain subject to competitive constraints that could exert downward pressure on our margins. During periods of low production volume, we generally have idle capacity and reduced gross profit.

Selling, General and Administrative Expenses
Selling, general and administrative expenses decreased 7% to $85.5 million in 2009 from $92.2 million in 2008. Selling, general and administrative expenses, as a percentage of sales, were 4.1% and 3.6%, respectively, for 2009 and 2008. The decrease in selling, general and administrative expenses is primarily due to reduced overhead resulting from cost controls and lower employee related expenses due to the overall lower sales volume when comparing the periods. The increase in selling, general and administrative expenses as a percentage of sales is also due to the impact of lower sales volumes during 2009.
 
33

 
Restructuring Charges
We recognized $8.3 million in restructuring charges during 2009 primarily related to capacity reduction in Europe and reductions in workforce in certain facilities worldwide.

The recognition of the restructuring charges requires that we make certain judgments and estimates regarding the nature, timing and amount of costs associated with planned exit activities. To the extent our actual results in exiting these facilities differ from our estimates and assumptions, we may be required to revise the estimates of future liabilities, requiring the recognition of additional restructuring charges or the reduction of liabilities already recognized. At the end of each reporting period, we evaluate the remaining accrued balances to ensure that no excess accruals are retained and the utilization of the provisions are for their intended purpose in accordance with developed exit plans. See Note 16 to the Consolidated Financial Statements in Item 8 of this report.

Income Tax Benefit
Income tax benefit of $2.0 million represented an effective tax rate of negative 3.8% for 2009, compared with income tax benefit $21.9 million at an effective tax rate of 13.9% for the same period in 2008. In the third quarter of 2008, we recorded a benefit related to a previously closed facility that generated a worthless stock deduction of $3.4 million, compared to $2.7 million recorded in the third quarter of 2009. In addition, in the third quarter of 2009, we recorded a tax benefit related to a revaluation loss in Mexico of $2.4 million and tax benefits totaling $1.9 million primarily related to intercompany pricing deductions. Excluding these tax benefits, the effective tax rate would have been 9.7% in 2009 compared to 11.7% in 2008. The decrease in the effective tax rate is primarily a function of the mix of tax rates in the various jurisdictions in which we do business, a shift in the proportion of consolidated taxable income earned in jurisdictions taxed at lower tax rates and a non deductible goodwill impairment recorded in 2008. See Note 9 to the Consolidated Financial Statements in Item 8 of this report.

Net Income (Loss)
We reported net income of approximately $53.9 million, or $0.83 per diluted share for 2009, compared with net loss of approximately $(135.6) million, or a loss per diluted share of $2.02 for 2008. The net increase of $189.5 million in 2009 was due to the factors discussed above.

Year Ended December 31, 2008 Compared With Year Ended December 31, 2007

Sales
Sales for the year ended December 31, 2008 and 2007 were $2.6 billion and $2.9 billion, respectively. The following table sets forth the percentages of our sales by industry for 2008 and 2007.
 
   
2008
   
2007
 
Computers and related products for business enterprises
    48 %     53 %
Telecommunication equipment
    18       15  
Industrial control equipment
    16       13  
Medical devices
    14       13  
Testing and instrumentation products
    4       6  
      100 %     100 %
 
Sales to customers in the computers and related products for business enterprises industry and the testing and instrumentation products industry declined 21% and 43%, respectively, from 2007 to 2008. In 2008, these declines were partially offset by sales increases to customers in the industrial control equipment (9%) and telecommunication equipment (7%) industries.

During 2008 and 2007, 48% and 43%, respectively, of our sales were from our international operations.
 
34


 
We had a backlog of approximately $1.6 billion at December 31, 2008, as compared to the 2007 year-end backlog of $1.7 billion.

Gross Profit
Gross profit decreased 11% to $175.9 million for 2008 from $198.5 million in 2007 as a result of a decrease in sales. Gross profit as a percentage of sales was 6.8% during 2008 and 2007.

Selling, General and Administrative Expenses
Selling, general and administrative expenses decreased 5% to $90.4 million in 2008 from $94.8 million in 2007. Selling, general and administrative expenses, as a percentage of sales, were 3.5% and 3.3%, respectively, for 2008 and 2007. The decrease in selling, general and administrative expenses was primarily due to reduced overhead resulting from cost controls and lower variable compensation and employee related expenses. The increase in selling, general and administrative expenses as a percentage of sales was primarily associated with the impact of lower sales volumes in 2008.

Restructuring Charges and Integration Costs
We recognized $2.8 million in restructuring charges during 2008 primarily related to reductions in workforce in certain facilities around the globe. In 2007, we recognized $11.6 million in restructuring charges and integration costs related to reductions in workforce, the re-sizing and closure of certain facilities and the integration of the facilities acquired in the Merger.

Interest Expense
Interest expense for 2008 and 2007 was $1.5 million and $2.2 million, respectively. The decrease was due to the repayment of the debt assumed in the Merger. See Note 6 to the Consolidated Financial Statements in Item 8 of this report.

Income Tax Benefit (Expense)
Income tax benefit of $21.9 million represented an effective tax rate of 13.9% for 2008, compared with income tax expense $(7.7) million at an effective tax rate of 7.7% for the same period in 2007. The change in the effective tax rate is primarily due to non deductible goodwill impairment recorded in 2008. See Note 9 to the Consolidated Financial Statements in Item 8 of this report.

Net Income (Loss)
We reported net income (loss) of approximately $(135.6) million, or a loss per diluted share of $2.02 for 2008, compared with net income of approximately $92.4 million, or $1.27 per diluted share for 2007. The net decrease of $228.0 million in 2008 was due to the factors discussed above.

LIQUIDITY AND CAPITAL RESOURCES
We have historically financed our growth and operations through funds generated from operations, proceeds from the sale and maturity of our investments and funds borrowed under our credit facilities. Cash and cash equivalents increased to $421.2 million at December 31, 2009 from $359.7 million at December 31, 2008.

Cash provided by operating activities was $123.6 million in 2009. The cash provided by operations during 2009 consisted primarily of net income of $53.9 million adjusted for $39.8 million of depreciation and amortization, a $6.3 million decrease in accounts receivable, and a $36.5 million decrease in inventories offset by a $14.9 million decrease in accounts payable. Working capital was $859.1 million at December 31, 2009 and $813.9 million at December 31, 2008.

We are continuing the practice of purchasing components only after customer orders or forecasts are received, which mitigates, but does not eliminate, the risk of loss on inventories. Supplies of electronic components and other materials used in operations are subject to industry-wide shortages. In certain instances, suppliers may allocate available quantities to us. If shortages of these components and other material supplies used in operations occur, vendors may not ship the quantities we need for production and we may be forced to delay shipments, which would increase backorders. Decreases in order activity in the first half of 2009 for the major electronic component suppliers resulted in cutbacks of manufacturing capacity. When demand started to recover in the third quarter of 2009, the supply base initiated actions to expand manufacturing capacity back to current levels of demand. This resulted in the elongation of the lead time for certain components over the latter part of the third and fourth quarter of 2009.
 
35

 
Cash used in investing activities was $40.5 million for the year ended December 31, 2009 primarily due to the $11.3 million purchase of an intangible asset, the $10.6 million business acquisition of certain precision machining assets and capabilities and additional purchases of property, plant and equipment. Capital expenditures of $22.3 million were primarily concentrated in manufacturing production equipment in the Americas and Asia to support our ongoing business and to expand certain existing manufacturing operations.

Cash used in financing activities was $24.4 million for the year ended December 31, 2009. During the year ended December 31, 2009, share repurchases totaled $27.9 million and we received $3.6 million from the exercise of stock options. Principal payments of capital lease obligations were $0.3 million in 2009.

Under the terms of a credit agreement (the Credit Agreement), we have a $100.0 million five-year revolving credit facility for general corporate purposes with a maturity date of December 21, 2012. The Credit Agreement includes an accordion feature under which total commitments under the facility may be increased by an additional $100 million, subject to satisfaction of certain conditions. Interest on outstanding borrowings under the Credit Agreement is payable quarterly, at our option, at LIBOR plus 0.75% to 1.75% or a prime rate plus 0.00% to 0.25%, based upon our debt ratio as specified in the Credit Agreement. A commitment fee of 0.15% to 0.35% per annum (based upon our debt ratio) on the unused portion of the revolving credit line is payable quarterly in arrears. As of December 31, 2009, we had no borrowings outstanding under the Credit Agreement, $0.1 million in outstanding letters of credit and $99.9 million was available for future borrowings.

The Credit Agreement is secured by our domestic inventory and accounts receivable, 100% of the stock of our domestic subsidiaries, and 65% of the voting capital stock of each direct foreign subsidiary and substantially all of our and our domestic subsidiaries’ other tangible and intangible assets. The Credit Agreement contains customary financial covenants as to working capital, debt leverage, fixed charges, and consolidated net worth, and restricts our ability to incur additional debt, pay dividends, sell assets and to merge or consolidate with other persons. As of December 31, 2009, we were in compliance with all such covenants and restrictions.

Our Thailand subsidiary has a multi-purpose credit facility with Kasikornbank Public Company Limited (the Thai Credit Facility) that provides for approximately $10.5 million (350 million Thai baht) in working capital availability. The Thai Credit Facility is secured by land and buildings in Thailand. Availability of funds under the Thai Credit Facility is reviewed annually and is currently accessible through April 2010. As of December 31, 2009, our Thailand subsidiary had no working capital borrowings outstanding.

Our operations, and the operations of businesses we acquire, are subject to certain foreign, federal, state and local regulatory requirements relating to environmental, waste management, health and safety matters. We believe we operate in substantial compliance with all applicable requirements and we seek to ensure that newly acquired businesses comply or will comply substantially with applicable requirements. To date, the costs of compliance and workplace and environmental remediation have not been material to us. However, material costs and liabilities may arise from these requirements or from new, modified or more stringent requirements in the future. In addition, our past, current and future operations, and the operations of businesses we have or may acquire, may give rise to claims of exposure by employees or the public, or to other claims or liabilities relating to environmental, waste management or health and safety concerns.
 
36

 
As of December 31, 2009, we had cash and cash equivalents totaling $421.2 million and $99.9 million available for borrowings under our revolving credit line. We believe that during the next twelve months, our capital expenditures will be approximately $35 to $45 million, principally for machinery and equipment to support our ongoing business around the globe. On July 24, 2008, our Board of Directors approved the repurchase of up to $100 million of our outstanding common shares (the 2008 Repurchase Program). As of December 31, 2009, we have $50.3 million remaining under the 2008 Repurchase Program to repurchase additional shares. We are under no commitment or obligation to repurchase any particular amount of common shares. Management believes that our existing cash balances and funds generated from operations will be sufficient to permit us to meet our liquidity requirements over the next twelve months. Management further believes that our ongoing cash flows from operations and any borrowings we may incur under our credit facilities will enable us to meet operating cash requirements in future years. Should we desire to consummate significant acquisition opportunities, our capital needs would increase and could possibly result in our need to increase available borrowings under our revolving credit facility or access public or private debt and equity markets. There can be no assurance, however, that we would be successful in raising additional debt or equity on terms that we would consider acceptable.

CONTRACTUAL OBLIGATIONS

We have certain contractual obligations that extend out beyond 2010 under lease obligations and debt arrangements. Non-cancelable purchase commitments do not typically extend beyond the normal lead-time of several weeks. Purchase orders beyond this time frame are typically cancelable. We do not utilize off-balance sheet financing techniques other than traditional operating leases and we have not guaranteed the obligations of any entity that is not one of our wholly owned subsidiaries. The total contractual cash obligations in existence at December 31, 2009 due pursuant to contractual commitments are:
 
         
Payments due by period
       
         
Less than
     
1-3
     
3-5
   
More than
 
(in thousands)
 
Total
   
1 year
   
years
   
years
   
5 years
 
Operating lease obligations
  $ 47,309     $ 12,210     $ 19,333     $ 8,622     $ 7,144  
Capital lease obligations
    21,928       1,469       3,019       3,131       14,309  
Total obligations
  $ 69,237     $ 13,679     $ 22,352     $ 11,753     $ 21,453  

The amount of unrecognized tax benefits as of December 31, 2009 including interest and penalties was $19.7 million. We have not provided a detailed estimate of the timing of future cash outflows associated with the liabilities recognized in this balance due to the uncertainty of when the related tax settlements will become due. See Note 9 to the Consolidated Financial Statements in Item 8 of this report.

OFF-BALANCE SHEET ARRANGEMENTS

As of December 31, 2009, we did not have any significant off-balance sheet arrangements. See Note 11 to the Consolidated Financial Statements in Item 8 of this report.
 
37

 

Our international sales are a significant portion of our net sales; we are exposed to risks associated with operating internationally, including the following:

 
Foreign currency exchange risk;
 
Import and export duties, taxes and regulatory changes;
 
Inflationary economies or currencies; and
 
Economic and political instability.

We do not use derivative financial instruments for speculative purposes. As of December 31, 2009, we did not have any foreign currency hedges. In the future, significant transactions involving our international operations may cause us to consider engaging in hedging transactions to attempt to mitigate our exposure to fluctuations in foreign exchange rates. These exposures are primarily, but not limited to, vendor payments and intercompany balances in currencies other than the currency in which our foreign operations primarily generate and expend cash. Our international operations in some instances operate in a natural hedge because both operating expenses and a portion of sales are denominated in local currency. Our sales are substantially denominated in U.S. dollars. Our foreign currency cash flows are generated in certain Asian and European countries, Mexico and Brazil.

We are also exposed to market risk for changes in interest rates, a portion of which relates to our invested cash balances. We do not use derivative financial instruments in our investing activities. We place cash and cash equivalents and investments with various major financial institutions. We protect our invested principal funds by limiting default risk, market risk and reinvestment risk. We mitigate default risk by generally investing in investment grade securities. As of December 31, 2009, the outstanding amount in the long-term investment portfolio included $50.1 million (par value) of auction rate securities with an average return of approximately 0.45%.
 
38

 

BENCHMARK ELECTRONICS, INC. AND SUBSIDIARIES
Consolidated Balance Sheets
   
December 31,
 
(in thousands, except for par value)
 
2009
   
2008
 
Assets
           
Current assets:
           
Cash and cash equivalents
  $ 421,243     $ 359,694  
Accounts receivable, net of allowance for doubtful accounts of $417
               
and $1,072, respectively
    417,268       422,058  
Inventories, net
    315,743       343,163  
Prepaid expenses and other assets
    31,034       28,308  
Income taxes receivable
    3,526        
Deferred income taxes
    9,861       2,184  
Total current assets
    1,198,675       1,155,407  
Long-term investments
    45,686       48,162  
Property, plant and equipment, net
    126,250       134,618  
Goodwill, net
    37,912       37,912  
Deferred income taxes
    17,713       24,317  
Other, net
    39,484       32,624  
    $ 1,465,720     $ 1,433,040  
Liabilities and Shareholders’ Equity
               
Current liabilities:
               
Current installments of capital lease obligations
  $ 300     $ 256  
Accounts payable
    275,900       288,045  
Income taxes payable
    6,464       3,745  
Accrued liabilities
    56,916       49,485  
Total current liabilities
    339,580       341,531  
Capital lease obligations, less current installments
    11,381       11,683  
Other long-term liabilities
    23,856       29,252  
Shareholders’ equity:
               
Preferred shares, $0.10 par value; 5,000 shares authorized, none issued
           
Common shares, $0.10 par value; 145,000 shares authorized;
               
issued – 64,208 and 65,337, respectively;
               
outstanding – 64,097 and 65,226 respectively
    6,410       6,523  
Additional paid-in capital
    732,956       741,813  
Retained earnings
    356,802       312,695  
Accumulated other comprehensive loss
    (4,993 )     (10,185 )
Less treasury shares, at cost; 111 shares
    (272 )     (272 )
Total shareholders’ equity
    1,090,903       1,050,574  
Commitments and contingencies
               
    $ 1,465,720     $ 1,433,040  
 
See accompanying notes to consolidated financial statements.
 
39

 
BENCHMARK ELECTRONICS, INC. AND SUBSIDIARIES
Consolidated Statements of Income (Loss)
 
   
Year ended December 31,
 
(in thousands, except per share data)
 
2009
   
2008
   
2007
 
Sales
  $ 2,089,253     $ 2,590,167     $ 2,915,919  
Cost of sales
    1,942,674       2,414,231       2,717,425  
Gross profit
    146,579       175,936       198,494  
Selling, general and administrative expenses
    85,500       92,154       96,614  
Restructuring charges and integration costs
    8,264       2,780       11,581  
Goodwill impairment
          247,482        
Income (loss) from operations
    52,815       (166,480 )     90,299  
Interest expense
    (1,399 )     (1,455 )     (2,183 )
Interest income
    2,210       8,675       11,217  
Other income (expense)
    (1,705 )     1,772       693  
Income (loss) before income taxes
    51,921       (157,488 )     100,026  
Income tax benefit (expense)
    1,974       21,856       (7,670 )
Net income (loss)
  $ 53,895     $ (135,632 )   $ 92,356  
Earnings (loss) per share:
                       
Basic
  $ 0.83     $ (2.02 )   $ 1.28  
Diluted
  $ 0.83     $ (2.02 )   $ 1.27  
Weighted-average number of shares outstanding:
                       
Basic
    64,758       67,060       72,061  
Diluted
    65,116       67,060       72,829  
 
See accompanying notes to consolidated financial statements.
 
40

 
BENCHMARK ELECTRONICS, INC. AND SUBSIDIARIES
Consolidated Statements of Comprehensive Income (Loss)
 
   
Year ended December 31,
 
(in thousands)
 
2009
   
2008
   
2007
 
Net income (loss)
  $ 53,895     $ (135,632 )   $ 92,356  
Other comprehensive income (loss):
                       
Foreign currency translation adjustments
    4,393       (6,462 )     8,019  
Unrealized gain (loss) on investments, net of tax
    924       (5,313 )      
Other
    (125 )     (26 )     76  
Comprehensive income (loss)
  $ 59,087     $ (147,433 )   $ 100,451  
 
The components of accumulated other comprehensive loss are as follows:
 
             
   
December 31,
 
(in thousands)
 
2009
   
2008
 
Foreign currency translation losses
  $ (453 )   $ (4,846 )
Unrealized loss on investments, net of tax
    (4,389 )     (5,313 )
Other
    (151 )     (26 )
    $ (4,993 )   $ (10,185 )

See accompanying notes to consolidated financial statements.
 
41

 
BENCHMARK ELECTRONICS, INC. AND SUBSIDIARIES
Consolidated Statements of Shareholders’ Equity
 
(in thousands)
 
Shares
   
Common Shares
   
Additional
paid-in
capital
   
Retained
earnings
   
Accumulated
other
comprehensive
income (loss)
   
Treasury shares
   
 
Total
shareholders’
equity
 
Balances, December 31, 2006
    64,751     $ 6,475     $ 587,522     $ 392,213     $ (6,479 )   $ (272 )   $ 979,459  
Adjustment from adoption of
                                                       
new income tax standard
                      19,335                   19,335  
Stock-based compensation expense
                4,454                         4,454  
Merger
    7,302       730       215,240                         215,970  
Conversion of debt
    351       35       4,965                         5,000  
Shares repurchased and retired
    (2,602 )     (260 )     (27,991 )     (24,718 )                 (52,969 )
Stock options exercised
    774       78       9,134                         9,212  
Federal tax benefit of
                                                       
stock options exercised
                2,455                         2,455  
Comprehensive income
                      92,356       8,095             100,451  
Balances, December 31, 2007
    70,576       7,058       795,779       479,186       1,616       (272 )     1,283,367  
Stock-based compensation expense
                4,732                         4,732  
Shares repurchased and retired
    (5,802 )     (580 )     (62,394 )     (30,859 )                 (93,833 )
Stock options exercised
    312       31       2,902                         2,933  
Issuance of restricted shares
    140       14       (14 )                        
Federal tax benefit of
                                                       
stock options exercised
                808                         808  
Comprehensive loss
                      (135,632 )     (11,801 )           (147,433 )
Balances, December 31, 2008
    65,226       6,523       741,813       312,695       (10,185 )     (272 )     1,050,574  
Stock-based compensation expense
                5,356                         5,356  
Shares repurchased and retired
    (1,672 )     (167 )     (17,964 )     (9,788 )                 (27,919 )
Stock options exercised
    366       36       3,566                         3,602  
Issuance of restricted shares
    150       15       (15 )                        
Warrants exercised
    27       3       200                         203  
Comprehensive income
                      53,895       5,192             59,087  
Balances, December 31, 2009
    64,097     $ 6,410     $ 732,956     $ 356,802     $ (4,993 )   $ (272 )   $ 1,090,903  

See accompanying notes to consolidated financial statements.
 
42

 
BENCHMARK ELECTRONICS, INC. AND SUBSIDIARIES
Consolidated Statements of Cash Flows
 
   
Year Ended December 31,
 
(in thousands)
 
2009
   
2008
   
2007
 
Cash flows from operating activities:
                 
Net income (loss)
  $ 53,895     $ (135,632 )   $ 92,356  
Adjustments to reconcile net income (loss) to net cash provided
                       
by operating activities:
                       
Depreciation and amortization
    39,807       40,668       43,132  
Deferred income taxes
    (1,073 )     (26,502 )     6,154  
Asset impairments
    236       247,482       1,453  
Gain on the sale of property, plant and equipment
    (9 )     (70 )     (409 )
Stock-based compensation expense
    5,356       4,732       4,454  
Excess tax benefit of stock options exercised
          (602 )     (1,659 )
Changes in operating assets and liabilities, net of effects
                       
from business acquisitions:
                       
Accounts receivable
    6,346       61,296       111,613  
Inventories
    36,515       15,985       134,781  
Prepaid expenses and other assets
    (222 )     33,718       23,512  
Accounts payable
    (14,922 )     (70,160 )     (109,250 )
Accrued liabilities
    3,744       (7,529 )     (23,906 )
Income taxes
    (6,103 )     83       (142 )
Net cash provided by operations
    123,570       163,469       282,089  
Cash flows from investing activities:
                       
Purchases of investments
          (162,709 )     (551,050 )
Proceeds from sales and maturities of investments
    3,400       292,050       468,685  
Additions to property, plant and equipment
    (22,291 )     (35,873 )     (17,003 )
Proceeds from the sale of property, plant and equipment
    315       291       2,056  
Additions to purchased software
    (105 )     (271 )     (3,569 )
Purchase of intangible asset
    (11,300 )            
Net cash acquired (used) in business acquisitions
    (10,552 )           3,415  
Other
                400  
Net cash provided by (used in) investing activities
    (40,533 )     93,488       (97,066 )
Cash flows from financing activities:
                       
Proceeds from stock options exercised
    3,602       2,933       9,212  
Excess tax benefit of stock options exercised
          602       1,659  
Debt issuance cost
          (234 )     (228 )
Principal payments on long-term debt and capital lease obligations
    (254 )     (621 )     (88,910 )
Proceeds from long-term debt
                16,760  
Share repurchases
    (27,919 )     (93,833 )     (52,969 )
Proceeds from exercise of warrants
    203              
Net cash used in financing activities
    (24,368 )     (91,153 )     (114,476 )
Effect of exchange rate changes
    2,880       (5,308 )     4,779  
Net increase in cash and cash equivalents
    61,549       160,496       75,326  
Cash and cash equivalents at beginning of year
    359,694       199,198       123,872  
Cash and cash equivalents at end of year
  $ 421,243     $ 359,694     $ 199,198  

See accompanying notes to consolidated financial statements.
 
43

 
Notes to Consolidated Financial Statements
(amounts in thousands, except per share data, unless otherwise noted)

 
Note 1—Summary of Significant Accounting Policies
 
(a) Business
Benchmark Electronics, Inc. (the Company) is a Texas corporation that provides world-wide integrated electronic manufacturing services. The Company provides services to original equipment manufacturers (OEMs) of computers and related products for business enterprises, medical devices, industrial control equipment, testing and instrumentation products and telecommunication equipment. The Company has manufacturing operations located in the Americas, Asia and Europe.
 
(b) Principles of Consolidation
The consolidated financial statements include the financial statements of Benchmark Electronics, Inc. and its wholly owned and majority owned subsidiaries. All significant intercompany balances and transactions have been eliminated in consolidation.
 
(c) Cash and Cash Equivalents
The Company considers all highly liquid debt instruments with an original maturity at the date of purchase of three months or less to be cash equivalents. Cash equivalents of $360.5 million and $209.6 million at December 31, 2009 and 2008, respectively, consist primarily of money-market funds, certificates of deposit, time deposits, commercial paper and U.S. Government backed Agency securities with an initial term of less than three months.
 
(d) Investments
Fair value is defined as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. A three-tier fair value hierarchy of inputs is employed to determine fair value measurements. Level 1 inputs are quoted prices (unadjusted) in active markets for identical assets and liabilities. Level 2 inputs are observable prices that are not quoted on active exchanges, such as quoted prices for similar assets or liabilities; quoted prices in markets that are not active; and model-derived valuations whose inputs are observable or whose significant value drivers are observable. Level 3 inputs are unobservable inputs employed for measuring the fair value of assets or liabilities. This hierarchy required the Company to use observable market data, when available, and to minimize the use of unobservable inputs when determining fair value.

As of December 31, 2009, $50.1 million (par value) of long-term investments were recorded at fair value. The long-term investments consist of auction rate securities, primarily secured by guaranteed student loans backed by a U.S. government agency, and are classified as available-for-sale. These investments are of a high credit quality with primarily AAA type credit ratings because of the government agency guarantee and other insurance. Auction rate securities are adjustable rate debt instruments whose interest rates were intended to reset every 7 to 35 days through an auction process. Overall changes in the global credit and capital markets led to failed auctions for these securities beginning in early 2008. These failed auctions, in addition to overall global economic conditions, impacted the liquidity of these investments and resulted in our continuing to hold these securities beyond their typical auction reset dates. The market for these types of securities remains illiquid as of December 31, 2009. These securities are classified as long-term investments due to the contractual maturity of the securities being over ten years.

These long-term investments were valued using Level 3 inputs as of December 31, 2009, as the assets were subject to valuation using significant unobservable inputs. The Company estimated the fair value of each security with the assistance of an independent valuation firm using a discounted cash flow model to calculate the present value of projected cash flows based on a number of inputs and assumptions including the security structure and terms, the current market conditions and the related impact on the expected weighted average life, interest rate estimates and default risk of the securities.
 
44

 
As of December 31, 2009, the Company has recorded an unrealized loss of $4.4 million on the long-term investments based upon this valuation. This unrealized loss reduced the fair value of the Company’s auction rate securities as of December 31, 2009 to $45.7 million. These investments have been in an unrealized loss position for greater than 12 months. During the year ended December 31, 2008, the Company recorded an unrealized loss of $5.3 million on the long-term investments.

The Company conducts periodic reviews to identify and evaluate each investment that has an unrealized loss. An unrealized loss exists when the current fair value of an individual security is less than its amortized cost basis. Due to the unrealized losses on the auction rate securities held, the Company has assessed whether the calculated impairment is other-than-temporary. In performing this assessment, even though the Company has no intention to sell the securities before the amortized cost basis is recovered and believes it is more-likely-than-not it will not be required to sell the securities prior to recovery, the Company has performed additional analyses to determine if a portion of the unrealized loss is considered a credit loss. A credit loss would be identified as the amount of the principal cash flows not expected to be received over the remaining term of the security as projected using the Company’s best estimates. The Company has assessed each security for credit impairment, taking into account factors such as (i) the length of time and the extent to which fair value has been below cost; (ii) activity in the market of the issuer which may indicate adverse credit conditions; (iii) the payment structure of the security; and (iv) the failure of the issuer of the security to make scheduled payments. The Company used an independent valuation firm to assist in making these assessments.

Based on these assessments, the Company has determined that there is no credit loss associated with its auction rate securities as of December 31, 2009, as shown by the cash flows expected to be received over the remaining life of the securities.

The following table provides a reconciliation of the beginning and ending balance of our auction rate securities classified as long-term investments measured at fair value using significant unobservable inputs (Level 3 inputs):

   
2009
   
2008
 
Balance as of January 1
  $ 48,162     $  
Transfers into Level 3
          55,484  
Net unrealized gains (losses) included in other comprehensive income (loss)
    924       (2,397 )
Redemptions of investments
    (3,400 )     (4,925 )
Balance as of December 31
  $ 45,686     $ 48,162  
Unrealized losses still held
  $ 4,389     $ 5,313  

The cumulative unrealized loss is included as a component of accumulated other comprehensive loss within shareholders’ equity in the accompanying consolidated balance sheet. As of December 31, 2009, there were no long-term investments measured at fair value using Level 1 or Level 2 inputs. The Company’s investments had no impairments as of December 31, 2007. All income generated from these investments is recorded as interest income.
 
(e) Inventories
Inventories include material, labor and overhead and are stated at the lower of cost (principally first-in, first-out method) or market.
 
(f) Property, Plant and Equipment
Property, plant and equipment are stated at cost. Depreciation is calculated on the straight-line method over the useful lives of the assets – 5 to 40 years for buildings and building improvements, 2 to 10 years for machinery and equipment, 2 to 10 years for furniture and fixtures, 2 to 5 years for vehicles. Leasehold improvements are amortized on the straight-line method over the shorter of the useful life of the improvement or the remainder of the lease term.
 
45

 
(g) Goodwill and Other Intangible Assets
Goodwill represents the excess of purchase price over fair value of net assets acquired. Goodwill and intangible assets acquired in a business combination and determined to have an indefinite useful life are not amortized, but instead tested for impairment at least annually. Intangible assets with estimable useful lives are amortized over their respective estimated useful lives to their estimated residual values.
 
(h) Other Assets
Other assets consist primarily of acquired identifiable intangible assets, capitalized purchased software costs, and assets held for sale. Identifiable intangible assets as of December 31, 2009 and 2008 were as follows:
   
Gross
         
Net
 
   
Carrying
 
Accumulated
   
Carrying
 
   
Amount
 
Amortization
   
Amount
 
Customer relationships
  $ 17,944     $ (5,432 )   $ 12,512  
Technology licenses
    11,300       (1,698 )     9,602  
Other
    868       (70 )     798  
Other intangible assets, December 31, 2009
  $ 30,112     $ (7,200 )   $ 22,912  
                     
   
Gross
           
Net
 
   
Carrying
 
Accumulated
   
Carrying
 
   
Amount
 
Amortization
   
Amount
 
Customer relationships
  $ 17,933     $ (3,624 )   $ 14,309  
Other
    868       (47 )     821  
Other intangible assets, December 31, 2008
  $ 18,801     $ (3,671 )   $ 15,130  
 
Customer relationships are being amortized on a straight-line basis over a period of ten years. In March 2009, the Company acquired certain technology licenses for $11.3 million. Technology licenses are being amortized over their estimated useful lives in proportion to the economic benefits consumed. Amortization of other intangible assets for the years ended December 31, 2009, 2008 and 2007 was $3.5 million, $1.8 million and $1.8 million, respectively.

The estimated future amortization expense of other intangible assets for each of the next five years is as follows:
 
Year ending December 31,
 
Amount
 
2010
  $ 4,448  
2011
    4,391  
2012
    4,391  
2013
    3,618  
2014
    1,812  

During 2009, 2008 and 2007, $0.1 million, $0.3 million and $3.6 million, respectively, of purchased software costs were capitalized. As of December 31, 2009 and 2008, purchase software, net of accumulated amortization totaled $4.0 million and $5.9 million, respectively. The accumulated amortization of purchased software costs at December 31, 2009 and 2008 was $21.3 million and $19.4 million, respectively. Capitalized purchase software costs are amortized straight-line over the estimated useful life of the related software, which ranges from 3 to 7 years.
 
46

 
As of December 31, 2009 and 2008, the Company had an asset held for sale in other assets with a net book value of $8.2 million. This asset is a manufacturing facility in Tianjin, China acquired in an acquisition (see Note 2) and is available for immediate sale. During 2008, the Company committed to a plan to divest its Tianjin facility.
 
(i) Impairment of Long-Lived Assets
Long-lived assets, such as property, plant, and equipment, and purchased intangibles subject to amortization, are reviewed for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. Recoverability of assets to be held and used is evaluated by a comparison of the carrying amount of an asset to estimated undiscounted future cash flows expected to be generated by the asset. If the carrying amount of an asset exceeds its estimated undiscounted future cash flows, an impairment charge is recognized by the amount by which the carrying amount of the asset exceeds the estimated fair value of the asset. Assets to be disposed of would be separately disclosed and reported at the lower of the carrying amount or estimated fair value less costs to sell, and are no longer depreciated. The assets and liabilities of a disposed group classified as held for sale would be disclosed separately in the appropriate asset and liability sections of the balance sheet.

Goodwill is tested annually for impairment, and is tested for impairment more frequently if events and circumstances indicate that the asset might be impaired. An impairment loss is recognized to the extent that the carrying amount exceeds the asset’s fair value. The impairment determination is made at the reporting unit level and consists of two steps. First, the Company determines the fair value of a reporting unit, which the Company has determined to be consistent with its operating segments as defined in Note 13 – “Segment and Geographic Information,” and compares it to its carrying amount. The fair value of our reporting units is determined based on a weighting of both projected discounted future results and comparative market multiples. The projected discounted future results (discounted cash flow approach) is based on assumptions that are consistent with the Company’s estimates of future growth and the strategic plan used to manage the underlying business. Factors requiring significant judgment include assumptions related to future growth rates, discount factors, and tax rates, amongst other considerations. Second, if the carrying amount of a reporting unit exceeds its estimated fair value, an impairment loss is recognized for any excess of the carrying amount of the reporting unit’s goodwill over the implied fair value of that goodwill. The implied fair value of goodwill is determined by allocating the fair value of the reporting unit in a manner similar to a purchase price allocation. The residual fair value after this allocation is the implied fair value of the reporting unit goodwill. This impairment analysis is based on significant assumptions of future results made by management, including revenue and cash flow projections. Circumstances that may lead to impairment of goodwill include unforeseen decreases in future performance or industry demand and the restructuring of our operations as a result of a change in our business strategy.

The Company completed the annual impairment test during the fourth quarter of 2009 and 2007 and determined that no goodwill impairment existed as of the date of the impairment test. In the fourth quarter of 2008, the Company’s annual goodwill impairment analysis indicated there was an impairment of goodwill in two of its reporting units, the Americas and Europe, primarily due to a decline in the Company’s market capitalization and market turmoil. Accordingly, the Company recorded a non-cash impairment charge in the fourth quarter of 2008 totaling $247.5 million. See Note 5.
 
47

 
(j) Earnings Per Share
Basic earnings per share is computed using the weighted-average number of shares outstanding. Diluted earnings per share is computed using the weighted-average number of shares outstanding adjusted for the incremental shares attributed to outstanding stock equivalents during the years ended December 31, 2009, 2008 and 2007. Stock equivalents include common shares issuable upon the exercise of stock options and other equity instruments, and are computed using the treasury stock method. Under the treasury stock method, the exercise price of a share, the amount of compensation cost, if any, for future service that the Company has not yet recognized, and the amount of estimated tax benefits that would be recorded in paid-in-capital, if any, when the share is exercised are assumed to be used to repurchase shares in the current period.

The following table sets forth the calculation of basic and diluted earnings per share.
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Numerator for basic earnings per share – net income (loss)
  $ 53,895     $ (135,632 )   $ 92,356  
Interest expense on convertible debt, net of tax
                147  
Numerator for diluted earnings per share
  $ 53,895     $ (135,632 )   $ 92,503  
Denominator for basic earnings per share – weighted-
                       
   average number of common shares outstanding
                       
   during the period
    64,758       67,060       72,061  
Incremental common shares attributable to exercise
                       
   of outstanding dilutive options
    303             593  
Incremental common shares attributable to outstanding
                       
   restricted shares and phantom stock
    45              
Incremental common shares attributable
                       
   to exercise of warrants
    10             133  
Incremental common shares attributable to
                       
   conversion of 6.5% convertible debt
                42  
Denominator for diluted earnings per share
    65,116       67,060       72,829  
Basic earnings (loss) per share
  $ 0.83     $ (2.02 )   $ 1.28  
Diluted earnings (loss) per share
  $ 0.83     $ (2.02 )   $ 1.27  
 
Options to purchase 4.1 million and 3.0 million common shares in 2009 and 2007, respectively, were not included in the computation of diluted earnings per share because the option exercise price was greater than the average market price of the common shares. In 2008, all outstanding options, warrants, restricted shares and phantom stock awards are not included in the computation of diluted loss per share because the Company was in a net loss position.
 
48

 
(k) Revenue Recognition
Revenue is primarily derived from the sale of circuit boards and systems. Revenue from the sale of circuit board assemblies, systems and excess inventory is recognized when title and risk of ownership have passed, the price to the buyer is fixed and determinable and recoverability is reasonably assured, which generally is when the goods are shipped. To a lesser extent, the Company also derives revenue from non-manufacturing services, such as product design, circuit board layout, and test development. Revenue from design, development and engineering services is recognized when the services are performed and collectibility is reasonably certain. Such services provided under fixed price contracts are accounted for using the percentage of completion method. Costs related to these services are expensed as incurred. The Company assumes no significant obligations after shipment as the Company typically warrants workmanship only. Based on historical experience, the warranty provision is immaterial.
 
(l) Income Taxes
Income taxes are accounted for under the asset and liability method. Deferred income taxes are recognized for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred taxes of a change in tax rates is recognized in income in the period that includes the enactment date. The Company records a valuation allowance to reduce its deferred tax assets to the amounts that is more likely than not to be realized. The Company has considered the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in assessing the need for the valuation allowance.

 
(m) Stock-Based Compensation
The Company’s stock awards plan permits the grant of a variety of types of awards, including stock options, restricted stock awards, stock appreciation rights, performance awards, and phantom stock awards, or any combination thereof, to key employees of the Company. Stock options are granted to employees with an exercise price equal to the market price of the Company’s stock on the date of grant, vest over a four-year period from the date of grant and have a term of ten years. Restricted shares and phantom stock awards granted to employees vest over a four-year period from the date of grant, subject to the continued employment of the employee by the Company. Members of the Board of Directors of the Company who are not employees of the Company participate in a separate stock option plan that provides for the granting of stock options upon the occurrence of the non-employee director’s election or re-election to the Board of Directors. All awards under the non-employee director stock option plan are fully vested upon the date of grant and have a term of ten years. See Note 8.

All share-based payments to employees, including grants of employee stock options, are recognized in the financial statements based on their fair values. The total compensation cost recognized for stock-based awards was $5.4 million, $4.7 million and $4.5 million for 2009, 2008 and 2007. The compensation expense for stock-based awards includes an estimate for forfeitures and is recognized over the vesting period of the options using the straight-line method. Cash flows from the tax benefits resulting from tax deductions in excess of the compensation cost recognized for stock-based awards (excess tax benefits) are classified as cash flows from financing activities. Awards of restricted shares and phantom stock are valued at the closing market price of the Company’s stock on the date of grant.

As of December 31, 2009, there was approximately $8.6 million of total unrecognized compensation cost related to nonvested stock options. That cost is expected to be recognized over a weighted-average period of 2.3 years. As of December 31, 2009, there was $4.1 million of total unrecognized compensation cost related to restricted share awards. That cost is expected to be recognized over a weighted-average period of 3.4 years. As of December 31, 2009, there was $1.2 million of total unrecognized compensation cost related to phantom stock awards. That cost is expected to be recognized over a weighted-average period of 3.5 years.
 
49

 
During the years ended December 31, 2009, 2008 and 2007, the Company issued 0.6 million, 0.8 million and 0.8 million options, respectively. In connection with the Merger, all outstanding Pemstar options were converted into 369 thousand options of the Company at the 0.160 exchange ratio on January 8, 2007. The fair value of each option grant is estimated on the date of grant using the Black-Scholes option-pricing model. The weighted-average assumptions used to value the option grants and the options converted from Pemstar during the years ended December 31, 2009, 2008 and 2007 were as follows:
 
  Year ended December 31,
 
2009
2008
2007
Stock Options
     
Expected term of options
5.7 years
4.8 years
3.8 years
Expected volatility
41%
40%
32%
Risk-free interest rate
2.51%
1.91%
3.82%
Dividend yield
zero
zero
zero

The expected term of the options represents the estimated period of time until exercise and is based on historical experience, giving consideration to the contractual terms, vesting schedules and expectations of future employee behavior. Separate groups of employees that have similar historical exercise behavior are considered separately for valuation purposes. Expected stock price volatility is based on the historical volatility of the Company’s stock. The risk-free interest rate is based on the U.S. Treasury zero-coupon rates in effect at the time of grant with an equivalent remaining term. The dividend yield reflects that the Company has not paid any cash dividends since inception.

The weighted-average fair value per option granted during the years ended December 31, 2009, 2008 and 2007 was $7.58, $4.75 and $6.94, respectively. The total cash received as a result of stock option exercises for year ended December 31, 2009, 2008 and 2007 was approximately $3.6 million, $2.9 million and $9.2 million, respectively. The tax benefit realized as a result of the stock option exercises during 2008 and 2007 was $0.8 million and $2.5 million, respectively. For the year ended December 31, 2009, 2008 and 2007, the total intrinsic value of stock options exercised was $2.6 million, $2.4 million and $8.0 million, respectively.
 
(n) Use of Estimates
Management of the Company has made a number of estimates and assumptions relating to the reporting of assets and liabilities and the disclosure of contingent assets and liabilities to prepare these financial statements in accordance with generally accepted accounting principles. Actual results could differ from those estimates.
 
(o) Fair Values of Financial Instruments
The Company’s financial instruments consist of cash equivalents, accounts receivable, accrued liabilities, accounts payable and capital lease obligations. The Company believes that the carrying value of these instruments approximate their fair value. As of December 31, 2009, the Company’s long-term investments are recorded at fair value. See Note 11.
 
(p) Foreign Currency
For foreign subsidiaries using the local currency as their functional currency, assets and liabilities are translated at exchange rates in effect at the balance sheet date and income and expenses are translated at average exchange rates. The effects of these translation adjustments are reported in other comprehensive income. Exchange losses arising from transactions denominated in a currency other than the functional currency of the entity involved are included in other expense and totaled approximately $1.9 million, $1.9 million and $0.2 million in 2009, 2008 and 2007, respectively.
 
50

 
(q) Recently Enacted Accounting Principles
In October 2009, the Financial Accounting Standards Board (FASB) issued amendments to the accounting and disclosure for revenue recognition. These amendments, effective for fiscal years beginning on or after June 15, 2010 (early adoption is permitted), modify the criteria for recognizing revenue in multiple element arrangements. The Company is currently assessing the impact of these amendments on its consolidated financial position and results of operations.

In October 2009, the FASB issued guidance which amends the scope of existing software revenue recognition accounting. Tangible products containing software components and non-software components that function together to deliver the product’s essential functionality would be scoped out of the accounting guidance on software and accounted for based on other appropriate revenue recognition guidance. This guidance is effective for all new or materially modified arrangements entered into on or after June 15, 2010, with earlier application permitted. Full retrospective application of the new guidance is optional. This guidance must be adopted in the same period that the Company adopts the amended accounting for arrangements with multiple deliverables described in the preceding paragraph. The Company is currently assessing the impact of this new guidance on its consolidated financial position and results of operations.

In August 2009, the FASB issued guidance on the measurement of liabilities at fair value. The guidance provides clarification that in circumstances in which a quoted market price in an active market for an identical liability is not available, an entity is required to measure fair value using a valuation technique that uses the quoted price of an identical liability when traded as an asset or, if unavailable, quoted prices for similar liabilities or similar assets when traded as assets. If none of this information is available, an entity should use a valuation technique in accordance with existing fair valuation principles. The implementation of this guidance on October 1, 2009 did not have an impact on the Company’s consolidated financial position and results of operations.

In June 2009, the FASB issued the FASB Accounting Standards Codification (the Codification). The Codification became the single source of authoritative, nongovernmental Generally Accepted Accounting Principles (GAAP), except for rules and interpretive releases of the SEC, which are sources of authoritative GAAP for SEC registrants. The Codification is effective for interim and annual periods ending after September 15, 2009. The adoption of the Codification on September 30, 2009 did not have an impact on the Company’s consolidated financial statements.

The Company has determined that all other recently issued accounting standards will not have a material impact on its consolidated financial position, results of operations and cash flows, or do not apply to its operations.
 
(r) Correction of an Immaterial Error
The 2008 and 2007 consolidated financial statements presented herein reflect the correction of an immaterial error related to income taxes. The correction is due to a deferred income tax liability that originated prior to 2004. The 2008 and 2007 correction resulted in a $5.9 million decrease in current deferred income taxes and an associated adjustment to decrease retained earnings by $5.9 million.
 
(s) Reclassifications
Certain reclassifications of prior period amounts have been made to conform to the current year presentation.
51


 
Note 2—Business Acquisitions
Effective January 8, 2007, the Company acquired Pemstar Inc. (Pemstar), a publicly traded electronics manufacturing services (EMS) company headquartered in Rochester, Minnesota (the Merger). Pursuant to the Agreement and Plan of Merger between the Company and Pemstar dated October 16, 2006 (the Merger Agreement), each issued and outstanding share of common stock, par value $0.01 per share, of Pemstar was converted into the right to receive 0.160 of a common share, par value $0.10 per share, of the Company. With the closing of the Merger, Pemstar became a wholly owned subsidiary of the Company. This acquisition expanded the Company’s customer base and deepened its engineering and systems integration capabilities.

The aggregate purchase price was $221.5 million, including common shares valued at $202.5 million, stock options and warrants valued at $9.0 million, conversion feature of debt valued at $4.8 million and acquisition costs of $5.2 million. The value of the 7.3 million common shares issued was based on the average market price of the Company’s common shares over the 2-day period before and after the terms of the acquisition were agreed to and announced.

As a direct result of the Merger, the Company assumed approximately $89.4 million of indebtedness, including $5.0 million in convertible senior subordinated notes. The Company reduced the assumed debt by $72.2 million in 2007. The convertible senior subordinated notes matured on May 1, 2007 and were converted into 0.4 million common shares at the request of the noteholders. Prior to the Merger, the Company had no outstanding debt.

The Company accounted for the Merger utilizing the purchase method of accounting. Therefore, the results of operations of the Pemstar operations since January 8, 2007 have been included in the accompanying consolidated statement of income. The allocation of the net purchase price of the Merger resulted in goodwill of $165.9 million.

The purchase price paid in the Merger has been allocated as follows:
 
Acquisition of the 45.6 million shares of outstanding common stock of Pemstar
     
at $4.44 per share
  $ 202,475  
Estimated fair value of Pemstar stock options and warrants
    9,028  
Estimated fair value of the conversion feature of debt
    4,773  
Acquisition costs
    5,179  
Total purchase price
  $ 221,455  
         
Current assets
  $ 241,539  
Property, plant and equipment
    52,542  
Deferred taxes
    14,256  
Goodwill
    165,878  
Intangible assets
    18,277  
Other assets
    4,386  
Total assets acquired
    496,878  
Current liabilities
    182,806  
Long-term debt, capital lease obligations and other long-term liabilities
    92,617  
Total liabilities assumed
    275,423  
Net assets acquired
  $ 221,455  

 
52

 
On March 1, 2007, we terminated a joint venture agreement and acquired for $5.3 million the remaining 40% minority interest in the Company’s Romanian subsidiary. We acquired the other 60% interest in the Merger discussed above. The purchase price in excess of the 40% minority interest liability resulted in goodwill of $4.7 million.

Pro forma results of operations for the year ended December 31, 2007 related to the Merger have not been presented since the operating results for Pemstar for the period during 2007 up to the date of acquisition are immaterial.

During the three months ended June 30, 2009, the Company completed an immaterial business acquisition of certain precision machining assets and capabilities for $10.6 million. The Company expensed $0.1 million in acquisition costs related to this acquisition.

Note 3—Inventories
Inventory costs are summarized as follows:
 
   
December 31,
 
   
2009
   
2008
 
Raw materials
  $ 237,294     $ 254,170  
Work in process
    54,197       56,486  
Finished goods
    24,252       32,507  
    $ 315,743     $ 343,163  
                 
Note 4—Property, Plant and Equipment
               
Property, plant and equipment consists of the following:
               
   
December 31,
 
   
2009
   
2008
 
Land
  $ 6,172     $ 6,172  
Buildings and building improvements
    65,258       63,839  
Machinery and equipment
    309,976       297,672  
Furniture and fixtures
    7,082       6,684  
Vehicles
    668       802  
Leasehold improvements
    17,059       15,328  
Construction in progress
    142       1,620  
      406,357       392,117  
Less accumulated depreciation
    (280,107 )     (257,499 )
    $ 126,250     $ 134,618  
 
53


Note 5—Goodwill
Goodwill associated with each of the Company’s business segments and changes in those amounts in 2007, 2008 and 2009 were as follows:
 
   
Americas
   
Asia
   
Europe
   
Total
 
Goodwill, December 31, 2006
  $ 106,931     $ 6,068     $     $ 112,999  
Acquisitions
    119,138       31,844       19,691       170,673  
Currency translation adjustment
    53                   53  
Goodwill, December 31, 2007
    226,122       37,912       19,691       283,725  
Impairment charge
    (227,791 )           (19,691 )     (247,482 )
Currency translation adjustment
    1,669                   1,669  
Goodwill, December 31, 2008 and 2009
  $     $ 37,912     $     $ 37,912  
 
See Note 2 for a discussion of the acquisitions completed during 2007.

Note 6—Borrowing Facilities
 
Capital lease obligations outstanding consist of the following:
 
                   
December 31,
 
                   
2009
   
2008
 
Capital lease obligations
                  $ 11,681     $ 11,939  
Less current installments
                    300       256  
Capital lease obligations, less current installments
                  $ 11,381     $ 11,683  

Under the terms of a Credit Agreement (the Credit Agreement), the Company has a $100 million five-year revolving credit facility for general corporate purposes with a maturity date of December 21, 2012. The Credit Agreement includes an accordion feature under which total commitments under the facility may be increased by an additional $100 million, subject to satisfaction of certain conditions and lender approval.

Interest on outstanding borrowings under the Credit Agreement is payable quarterly, at the Company’s option, at either LIBOR plus 0.75% to 1.75% or a prime rate plus 0.00% to 0.25%, based upon the Company’s debt ratio as specified in the Credit Agreement. A commitment fee of 0.15% to 0.35% per annum (based upon the Company’s debt ratio) on the unused portion of the revolving credit line is payable quarterly in arrears. As of December 31, 2009, the Company had no borrowings outstanding under the Credit Agreement, $0.1 million in outstanding letters of credit and $99.9 million was available for future borrowings.

The Credit Agreement is secured by the Company’s domestic inventory and accounts receivable, 100% of the stock of the Company’s domestic subsidiaries, 65% of the voting capital stock of each direct foreign subsidiary and substantially all of the other tangible and intangible assets of the Company and its domestic subsidiaries. The Credit Agreement contains customary financial covenants as to working capital, debt leverage, fixed charges, and consolidated net worth, and restricts the ability of the Company to incur additional debt, pay dividends, sell assets, and to merge or consolidate with other persons. As of December 31, 2009, the Company was in compliance with all such covenants and restrictions.
 
54


 
The Company’s Thailand subsidiary has a multi-purpose credit facility with Kasikornbank Public Company Limited (the Thai Credit Facility) that provides for approximately $10.5 million (350 million Thai baht) in working capital availability. The Thai Credit Facility is secured by land and buildings in Thailand. Availability of funds under the Thai Credit Facility is reviewed annually and is currently accessible through April 2010. As of December 31, 2009, the Company’s Thailand subsidiary had no working capital borrowings outstanding.

The aggregate principal maturities of capital lease obligations for each of the five years subsequent to December 31, 2009 are as follows: 2010, $0.3 million; 2011, $0.4 million; 2012, $0.4 million; 2013, $0.5 million; and 2014, $0.6 million.

Note 7—Commitments
The Company leases certain manufacturing equipment, office equipment, vehicles and office, warehouse and manufacturing facilities under operating leases. Some of the leases provide for escalation of the lease payments as maintenance costs and taxes increase. The leases expire at various times through 2016. Leases for office space and manufacturing facilities generally contain renewal options. Rental expense for the years ended December 31, 2009, 2008 and 2007 was $10.6 million, $10.9 million and $12.3 million, respectively.

The Company is obligated under capital leases, assumed in the Merger, that expire on various dates through 2023. As of December 31, 2009, property, plant and equipment include the following amounts under capital leases:
 
Buildings and building improvements
  $ 12,207  
Vehicles
    28  
      12,235  
Less accumulated depreciation
    (2,270 )
    $ 9,965  

Future minimum lease payments under noncancelable operating leases and future minimum capital lease payments are as follows:
   
Capital
   
Operating
 
Year ending December 31,
 
Leases
   
Leases
 
2010
  $ 1,469     $ 12,210  
2011
    1,499       9,757  
2012
    1,520       9,576  
2013
    1,550       4,624  
2014
    1,581       3,998  
Thereafter
    14,309       7,144  
Total minimum lease payments
  $ 21,928     $ 47,309  
Less: amount representing interest
    10,247          
Present value of minimum lease payments
    11,681          
Less: current installments
    300          
Capital lease obligations, less current installments
  $ 11,381          
 
55

 
The Company enters into contractual commitments to deliver products and services in the ordinary course of business. The Company believes that all such contractual commitments will be met or renegotiated such that no material adverse financial impact on the Company’s financial position, results of operations or liquidity will result from these commitments.

Note 8—Common Shares and Stock Option Plans
On July 24, 2008, the Company completed the repurchase of 6.8 million of its common shares under the $125 million share repurchase program approved by the Board of Directors on July 25, 2007. On July 24, 2008, the Board of Directors of the Company approved the additional repurchase of up to $100 million of the Company’s outstanding common shares. Share purchases may be made in the open market, in privately negotiated transactions or block transactions, at the discretion of the Company’s management and as market conditions warrant. Purchases will be funded from available cash and may be commenced, suspended or discontinued at any time without prior notice. Shares repurchased under the program will be retired. During 2009, the Company repurchased a total of 1.7 million common shares for $27.9 million at an average price of $16.67 per share. During 2008, the Company repurchased a total of 5.8 million common shares for $93.8 million at an average price of $16.14 per share. During the period from July 25, 2007 to December 31, 2007, the Company repurchased a total of 2.6 million common shares for $53.0 million at an average price of $20.33 per share.

On February 16, 2000, the Board of Directors of the Company adopted and subsequently its shareholders approved the Benchmark Electronics, Inc. 2000 Stock Awards Plan (the 2000 Plan). The 2000 Plan authorizes the Company, upon recommendation of the compensation committee of the Board of Directors, to grant a variety of types of awards, including stock options, restricted stock awards, stock appreciation rights, performance awards, and phantom stock awards, or any combination thereof, to key employees of the Company. The maximum number of common shares that may be subject to outstanding awards determined immediately after the grant of any award, and the maximum number of shares which may be issued under the 2000 Plan, as amended, pursuant to all awards, may not exceed 11.25 million shares (subject to antidilutive adjustment).

The 2000 Plan provides for the discretionary granting by the Company of incentive stock options as well as non-qualified stock options. Incentive stock options may only be granted to employees of the Company or its subsidiaries. The exercise price of any incentive stock option must not be less than the fair market value of the common shares on the date of grant. The exercise price of any incentive stock option granted to 10% shareholders (employees who possess more than 10% of the total combined voting power of all classes of shares of the Company) must be at least 110% of the fair market value of the common shares at the time such option is granted. The stock options will terminate 5 years after the grant date for 10% shareholders and 10 years after the date of grant for all other optionees. Options granted under the 2000 Plan vest over 4 years, subject to the continued employment of the employee by the Company. Restricted shares and phantom stock awards granted to employees vest over a four-year period from the date of grant, subject to the continued employment of the employee by the Company. As of December 31, 2009, the Company has 5.5 million equity awards outstanding with respect to common shares under the 2000 Plan. The 2000 Plan expired on February 16, 2010 and no additional grants may be made under that plan.

In December of 1994, the Board of Directors of the Company adopted the Benchmark Electronics, Inc. 1994 Stock Option Plan for Non-Employee Directors (the 1994 Plan) for the benefit of members of the Board of Directors of the Company or its affiliates who were not employees of the Company or its affiliates (as defined in the 1994 Plan). The aggregate number of common shares for which options may be granted under the 1994 Plan was 450 thousand. Under the terms of the 1994 Plan, as amended, each member of the Board of Directors of the Company or its affiliates who was not an employee of the Company or any of its affiliates on the date of the grant (a Non-Employee Director) received a grant of an option to purchase 13.5 thousand common shares of the Company upon the date of his election or re-election to the Board of Directors. The 1994 Plan was replaced in 2002, and no additional grants may be made under that plan. As of December 31, 2009, the Company has outstanding options with respect to 27.0 thousand common shares under the 1994 Plan.
 
56

 
In May 2002, the shareholders of the Company adopted the Benchmark Electronics, Inc. 2002 Stock Option Plan for Non-Employee Directors (the 2002 Plan). The 2002 Plan replaced the 1994 Plan. The 2002 Plan, as amended, provides for the granting of a stock option to purchase up to 15.75 thousand common shares upon the occurrence of the non-employee director’s election or re-election to the Board. The maximum number of common shares for which options may be granted under the 2002 Plan is 675 thousand. No awards may be granted under the 2002 Plan after the expiration of ten years from February 26, 2002, the date of its adoption by the Board of Directors. The 2002 Plan remains in effect as to awards made prior to the expiration of ten years until such awards have been satisfied or have expired. All awards under the 2002 Plan are fully vested upon the date of grant. The exercise price per common share of options granted under the 2002 Plan will be the fair market value of a common share on the date such option is granted. In 2009, 2008 and 2007, pursuant to the 2002 Plan, 60.5 thousand, 60.5 thousand and 50.5 thousand options, respectively, were granted to Non-Employee Directors to purchase common shares at a weighted-average exercise price of $12.18, $16.25 and $21.35 per share, respectively. As of December 31, 2009, the Company has outstanding options with respect to 324.8 thousand common shares and 220.5 thousand additional options may be granted under the 2002 Plan.

The following table summarizes the activities relating to the Company’s stock option:
               
Weighted-
       
         
Weighted-
   
Average
       
         
Average
   
Remaining
   
Aggregate
 
   
Number of
   
Exercise
   
Contractual
   
Intrinsic
 
   
Options
   
Price
   
Term (Years)
   
Value
 
Outstanding at December 31, 2006
    5,716     $ 18.54                  
Granted
    846     $ 17.47                  
Converted from Merger
    369     $ 25.47                  
Exercised
    (774 )   $ 11.89                  
Forfeited or expired
    (282 )   $ 30.08                  
Outstanding at December 31, 2007
    5,875     $ 19.15                  
Granted
    817     $ 12.91                  
Exercised
    (313 )   $ 9.38                  
Forfeited or expired
    (541 )   $ 23.04                  
Outstanding at December 31, 2008
    5,838     $ 18.43                  
Granted
    584     $ 18.39                  
Exercised
    (366 )   $ 9.85                  
Forfeited or expired
    (525 )   $ 16.26                  
Outstanding at December 31, 2009
    5,531     $ 19.20       6.18     $ 13,080  
Exercisable at December 31, 2009
    3,128     $ 19.97       4.56     $ 7,580  

The aggregate intrinsic value in the table above is before income taxes and is calculated as the difference between the exercise price of the underlying options and the Company’s closing stock price of $18.91 as of the last business day of the year ended December 31, 2009 for options that had exercise prices that were below the closing price.
 
57


 
At December 31, 2009, 2008 and 2007, the number of options exercisable was 3.1 million, 3.4 million and 3.6 million, respectively, and the weighted-average exercise price of those options was $19.97, $18.02 and $17.11, respectively.

The following table summarizes the activities relating to the Company’s restricted shares:
         
Weighted-
 
         
Average
 
         
Grant Date
 
   
Shares
   
Fair Value
 
Outstanding at December 31, 2007
           
Granted
    140     $ 13.99  
Outstanding at December 31, 2008
    140     $ 13.99  
Granted
    151     $ 19.11  
Forfeited
    (1 )   $ 12.64  
Outstanding at December 31, 2009
    290     $ 16.67  

As of December 31, 2009, there were no vested restricted shares.

The following table summarizes the activities relating to the Company’s phantom stock awards:
         
Average
 
         
Grant Date
 
   
Shares
   
Fair Value
 
Outstanding at December 31, 2007
           
Granted
    34     $ 12.64  
Outstanding at December 31, 2008
    34     $ 12.64  
Granted
    49     $ 19.11  
Forfeited
    (2 )   $ 14.07  
Outstanding at December 31, 2009
    81     $ 16.50  

As of December 31, 2009, there were no vested phantom stock awards.
 
58

 
Note 9—Income Taxes
Income tax expense (benefit) based on income (loss) before income taxes consists of:
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Current:
                 
U.S. Federal
  $ (4,521 )   $ (1,922 )   $ (3,361 )
State and local
    294       226       1,253  
Foreign
    3,326       6,342       3,624  
      (901 )     4,646       1,516  
Deferred:
                       
U.S. Federal
    1,789       (22,598 )     6,350  
State and local
    355       (2,751 )     (321 )
Foreign
    (3,217 )     (1,153 )     125  
      (1,073 )     (26,502 )     6,154  
    $ (1,974 )   $ (21,856 )   $ 7,670  

Worldwide income (loss) before income taxes consisted of the following:
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
United States
  $ 4,012     $ (238,750 )   $ 27,529  
Foreign
    47,909       81,262       72,497  
    $ 51,921     $ (157,488 )   $ 100,026  
 
The tax effects of temporary differences that give rise to significant portions of the deferred tax assets and deferred tax liabilities are presented below:
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Tax at statutory rate
  $ 18,172     $ (55,121 )   $ 35,009  
State taxes, net of federal tax effect
    422       (1,641 )     605  
Tax exempt interest
    (162 )     (1,354 )     (2,147 )
Effect of foreign operations and tax incentives
    (13,998 )     (21,358 )     (22,200 )
Valuation allowance
    (486 )     (1,493 )     (434 )
Write-off of investment in inactive foreign owned subsidiary
    (2,668 )     (3,440 )     (6,481 )
Revaluation loss
    (2,429 )            
Intercompany pricing adjustments
    (1,293 )            
Non deductible goodwill impairment
          61,289        
Losses in foreign jurisdictions for which no benefit has
                       
been provided
    894       758       382  
Other
    (426 )     504       2,936  
Total income tax expense (benefit)
  $ (1,974 )   $ (21,856 )   $ 7,670  
 
59

 
The tax effects of temporary differences that give rise to significant portions of the deferred tax assets and deferred tax liabilities are presented below: 

   
December 31,
 
   
2009
   
2008
 
Deferred tax assets:
           
Carrying value of inventories
  $ 1,888     $  
Accrued liabilities and allowances deductible for tax purposes
               
    on a cash basis
    4,508       5,149  
Goodwill
    22,049       26,376  
Stock-based compensation
    5,985       4,186  
Net operating loss carryforwards
    58,566       60,681  
Tax credit carryforwards
    3,957       3,621  
Other
    7,484       6,985  
      104,437       106,998  
Less: valuation allowance
    (72,926 )     (75,843 )
Net deferred tax assets
    31,511       31,155  
Deferred tax liabilities:
               
Plant and equipment, due to differences in depreciation
    (2,133 )     (2,930 )
Carrying value of inventories
          (223 )
Other
    (1,804 )     (1,501 )
Gross deferred tax liability
    (3,937 )     (4,654 )
Net deferred tax asset
  $ 27,574     $ 26,501  
Recorded as:
               
Current deferred tax assets
  $ 9,861     $ 2,184  
Non-current deferred tax assets
    17,713       24,317  
Net deferred tax asset
  $ 27,574     $ 26,501  


60

 
The net change in the total valuation allowance for the years ended December 31, 2009, 2008 and 2007 was an increase (decrease) of $(2.9) million, $0.5 million and $71.2 million, respectively. The increase in the valuation allowance for the year ended December 31, 2007 was primarily a result of $71.4 million that was recorded in connection with the Merger. In assessing the realizability of deferred tax assets, management considers whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during the periods in which those temporary differences become deductible. Management considers the scheduled reversal of deferred tax liabilities, projected future taxable income, and tax planning strategies in making this assessment. Based upon the level of historical taxable income and projections for future taxable income over the periods which the deferred tax assets are deductible, management believes it is more likely than not the Company will realize the benefits of these deductible differences, net of the existing valuation allowances as of December 31, 2009.

As of December 31, 2009, the Company had $130.0 million in U.S. Federal operating loss carryforwards which will expire from 2022 to 2029, state operating loss carryforwards of approximately $115.0 million which will expire from 2017 to 2029, foreign operating loss carryforwards of approximately $26.8 million with indefinite carryforward periods, and foreign operating loss carryforwards of approximately $5.6 million which will expire at varying dates through 2017. The utilization of these net operating loss carryforwards is limited to the future operations of the Company in the tax jurisdictions in which such carryforwards arose. The Company has U.S. federal tax credit carryforwards of $2.3 million which will expire at varying dates through 2029. The Company has state tax credit carryforwards of $1.7 million which will expire at varying dates through 2027.

Cumulative undistributed earnings of certain foreign subsidiaries amounted to approximately $388 million as of December 31, 2009. The Company considers earnings from foreign subsidiaries to be indefinitely reinvested and, accordingly, no provision for U.S. federal and state income taxes has been made for these earnings. Upon distribution of foreign subsidiary earnings in the form of dividends or otherwise, such distributed earnings would be reportable for U.S. income tax purposes (subject to adjustment for foreign tax credits). Determination of the amount of any unrecognized deferred tax liability on these undistributed earnings is not practical.

The Company has been granted certain tax incentives, including tax holidays, for its subsidiaries in China, Ireland, Malaysia and Thailand. These tax incentives, including tax holidays, expire on various dates through 2012, and are subject to certain conditions with which the Company expects to comply. The net impact of these tax incentives was to lower income tax expense for the years ended December 31, 2009, 2008, and 2007 by approximately $9.9 million (approximately $0.15 per diluted share), $15.9 million (approximately $0.24 per diluted share) and $15.7 million (approximately $0.22 per diluted share), respectively.
 
61


 
On January 1, 2007, the Company adopted a new income tax accounting standard that prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken in a tax return. The Company must determine whether it is “more-likely-than-not” that a tax position will be sustained upon examination, including resolution of any related appeals or litigation processes, based on the technical merits of the position. Once it is determined that a position meets the more-likely-than-not recognition threshold, the position is measured to determine the amount of benefit to recognize in the financial statements. The cumulative effect of adopting this new income tax accounting standard was a $19.3 million decrease to income taxes payable with a corresponding increase to the January 1, 2007 balance of retained earnings for tax benefits not previously recognized. As of December 31, 2009, the total amount of the reserve for uncertain tax benefits including interest and penalties is $19.7 million. A reconciliation of the beginning and ending amount of unrecognized tax benefits, excluding interest and penalties, is as follows:
 
   
December 31,
 
   
2009
   
2008
   
2007
 
Balance as of January 1
  $ 23,121     $ 27,478     $ 16,510  
Additions related to prior year tax positions
    135       182       600  
Decreases related to prior year tax positions
    (2,800 )     (800 )     (200 )
Increase from entities acquired in the current year
                16,224  
Additions related to current period tax positions
                825  
Decreases as a result of a lapse of the applicable statute
                       
   of limitations in current year
    (4,420 )     (3,739 )     (6,481 )
Balance as of December 31
  $ 16,036     $ 23,121     $ 27,478  
 
The decrease in the total amount of unrecognized tax benefits reserve during 2009 and 2008 is primarily the result of the expiration of the statute of limitations for a worthless stock deduction. The increase in the total amount of unrecognized tax benefits reserve from the date of adoption to December 31, 2007 is primarily the result of the addition of $16.2 million of uncertain tax benefits acquired in the Merger. The analysis of the uncertain tax positions related to an acquisition in 2007 for both U.S. and foreign jurisdictions was performed as of the acquisition date.

The reserve is classified as a current or long-term liability in the consolidated balance sheet based on the Company’s expectation of when the items will be settled. The Company records interest expense and penalties accrued in relation to uncertain income tax benefits as a component of current income tax expense. The total amount of interest and penalties included in income tax expense during the year ended December 31, 2009, 2008 and 2007 was $0.07 million, $0.04 million and $0.3 million, respectively. The total amount of accrued potential interest and penalties on unrecognized tax benefits as of December 31, 2009 is $2.1 million and $1.6 million, respectively.

During the next twelve months, it is reasonably possible that the reserve for uncertain tax benefits will decrease by approximately $1.3 million primarily due to the expiration of the statute of limitations for various prior year unrecognized tax benefits. The Company’s business locations in Brazil, China, Ireland, Luxembourg, Malaysia, Mexico, the Netherlands, Romania, Singapore, Thailand and the United States remain open to examination by the various local taxing authorities, in total or in part, for fiscal years 2001 to 2009.

The Company is subject to examination by tax authorities for varying periods in various U.S. and foreign tax jurisdictions. During the course of such examinations disputes occur as to matters of fact and/or law. Also, in most tax jurisdictions the passage of time without examination will result in the expiration of applicable statutes of limitations thereby precluding the taxing authority from conducting an examination of the tax period(s) for which such statute of limitation has expired. The Company believes that it has adequately provided for its tax liabilities.
 
62

 
Note 10—Major Customers
The Company’s customers operate in industries that are, to a varying extent, subject to rapid technological change, vigorous competition and short product life cycles. Developments adverse to the electronics industry, the Company’s customers or their products could impact the Company’s overall credit risk.

The Company extends credit based on evaluation of its customers’ financial condition and generally does not require collateral or other security from its customers and would incur a loss equal to the carrying value of the accounts receivable if its customer failed to perform according to the terms of the credit arrangement.

Sales to major customers were as follows for the indicated periods:
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Customer A
  $ 290,236     $ *     $  *  
Customer B
  $ *     $ 643,868     $ 1,118,790  
 
* amount is less than 10% of total
                       

Note 11—Financial Instruments and Concentration of Credit Risk
The carrying amounts of cash equivalents, accounts receivable, accrued liabilities, accounts payable and capital lease obligations approximate fair value. As of December 31, 2009, the Company’s investments are recorded at fair value. See Note 1 (d). As of December 31, 2009, the Company had no significant off-balance sheet concentrations of credit risk such as foreign currency exchange contracts or other hedging arrangements. Financial instruments that subject the Company to credit risk consist of cash and cash equivalents, investments and trade accounts receivable. Management maintains the majority of the Company’s cash and cash equivalents with financial institutions. One of the most significant credit risks is the ultimate realization of accounts receivable. This risk is mitigated by (i) sales to well established companies, (ii) ongoing credit evaluation of customers, and (iii) frequent contact with customers, thus enabling management to monitor current changes in business operations and to respond accordingly. Management considers these concentrations of credit risks in establishing our allowance for doubtful accounts and believes these allowances are adequate. The Company’s largest customer represented approximately 21% and 16% of its gross accounts receivable as of December 31, 2009 and 2008, respectively.

Note 12—Concentrations of Business Risk
Substantially all of the Company’s sales are derived from electronics manufacturing services in which the Company purchases components specified by its customers. The Company uses numerous suppliers of electronic components and other materials for its operations. Some components used by the Company have been subject to industry-wide shortages, and suppliers have been forced to allocate available quantities among their customers. The Company’s inability to obtain any needed components during periods of allocation could cause delays in manufacturing and could adversely affect results of operations.
 
63

 
Note 13—Segment and Geographic Information
The Company has manufacturing facilities in the Americas, Asia and Europe to serve its customers. The Company is operated and managed geographically. The Company’s management evaluates performance and allocates the Company’s resources on a geographic basis. Intersegment sales are generally recorded at prices that approximate arm’s length transactions. Operating segments’ measure of profitability is based on income (loss) from operations, except for a non-cash goodwill impairment charge totaling $247.5 million in 2008. These non-cash impairment charges are recorded in the Corporate and intersegment eliminations below. See Note 1(i). The accounting policies for the reportable operating segments are the same as for the Company taken as a whole. The Company has three reportable operating segments: the Americas, Asia, and Europe. Information about operating segments was as follows:
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Net sales:
                 
   Americas
  $ 1,279,632     $ 1,689,146     $ 2,100,431  
   Asia
    724,541       908,539       965,268  
   Europe
    182,031       257,235       354,489  
   Elimination of intersegment sales
    (96,951 )     (264,753 )     (504,269 )
    $ 2,089,253     $ 2,590,167     $ 2,915,919  
Depreciation and amortization:
                       
   Americas
  $ 19,376     $ 17,361     $ 21,306  
   Asia
    13,873       16,892       16,791  
   Europe
    2,778       2,834       2,598  
   Corporate
    3,780       3,581       2,437  
    $ 39,807     $ 40,668     $ 43,132  
Income (loss) from operations:
                       
   Americas
  $ 36,211     $ 42,816     $ 47,296  
   Asia
    52,969       68,726       64,536  
   Europe
    (1,376 )     2,383       3,888  
   Corporate and intersegment eliminations
    (34,989 )     (280,405 )     (25,421 )
    $ 52,815     $ (166,480 )   $ 90,299  
Capital expenditures:
                       
   Americas
  $ 10,298     $ 13,937     $ 5,509  
   Asia
    8,519       19,113       9,600  
   Europe
    3,281       2,301       1,221  
   Corporate
    298       793       4,242  
    $ 22,396     $ 36,144     $ 20,572  
Total assets:
                       
   Americas
  $ 567,494     $ 532,415     $ 843,759  
   Asia
    418,208       477,500       514,078  
   Europe
    263,025       182,603       140,948  
   Corporate and other
    216,993       240,522       258,182  
    $ 1,465,720     $ 1,433,040     $ 1,756,967  
 
64

 
Geographic net sales information provided below reflects the destination of the product shipped. Long-lived assets information is based on the physical location of the asset.
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Geographic net sales:
                 
   United States
  $ 1,549,272     $ 1,953,537     $ 2,241,403  
   Asia
    171,355       207,172       178,888  
   Europe
    331,830       390,632       462,693  
   Other
    36,796       38,826       32,935  
    $ 2,089,253     $ 2,590,167     $ 2,915,919  
Long-lived assets:
                       
   United States
  $ 77,675     $ 74,993     $ 86,602  
   Asia
    65,555       70,916       69,062  
   Europe
    9,344       8,432       10,147  
   Other
    13,160       12,901       8,021  
    $ 165,734     $ 167,242     $ 173,832  

Note 14—Employee Benefit Plans
The Company has defined contribution plans qualified under Section 401(k) of the Internal Revenue Code for the benefit of its U.S. employees. The plans cover all U.S. employees with at least one year of service. Under the provisions of the plans, the Company will match a portion of each participant’s contribution. The Company may also make discretionary contributions to the plans. During 2009, 2008 and 2007, the Company made contributions to the plans of approximately $3.2 million, $3.4 million and $3.5 million, respectively. The Company also has defined contribution benefit plans for certain of its international employees primarily dictated by the custom of the regions in which it operates. During 2009, 2008 and 2007, the Company made contributions to the international plans of approximately $0.2 million, $0.5 million and $0.5 million, respectively.

Note 15—Contingencies
The Company is involved in various legal actions arising in the ordinary course of business. In the opinion of management, the ultimate disposition of these matters will not have a material adverse effect on the Company’s consolidated financial position or results of operations.
 
65

 
Note 16—Restructuring Charges and Integration Costs
The Company has undertaken initiatives to restructure its business operations with the intention of improving utilization and realizing cost savings in the future. These initiatives have included changing the number and location of production facilities, largely to align capacity and infrastructure with current and anticipated customer demand. This alignment includes transferring programs from higher cost geographies to lower cost geographies. The process of restructuring entails, among other activities, moving production between facilities, reducing staff levels, realigning our business processes and reorganizing our management.

The Company recognized restructuring charges during 2009 primarily related to capacity reduction in Europe and reductions in workforce in certain facilities worldwide. In 2008, the Company recognized restructuring charges primarily related to reductions in workforce in certain facilities. The Company recognized restructuring charges during 2007 related to reductions in workforce and the re-sizing of certain facilities. The Company also recorded an assumed liability for expected involuntary employee termination costs and facility closures in connection with the Merger during 2007. These charges were recorded pursuant to plans developed and approved by management.

The components of the restructuring charges during 2009 were as follows:
 
   
Americas
   
Europe
   
Asia
   
Total
 
Severance costs
  $ 1,262     $ 2,100     $ 939     $ 4,301  
Facility lease costs
    139       2,704             2,843  
Other exit costs
    920       144       30       1,094  
    $ 2,321     $ 4,948     $ 969     $ 8,238  

During 2009, the Company recognized $4.3 million of employee termination costs associated with the involuntary terminations of 655 employees in connection with reductions in workforce of certain facilities. The identified involuntary employee terminations by reportable geographic region amounted to approximately 327, 270 and 58 for the Americas, Asia and Europe, respectively. The Company also recorded approximately $2.8 million for facility lease obligations and approximately $1.1 million for other exit costs, including $0.2 million of asset impairments associated with the closure of certain leased facilities.

The components of the restructuring charges during 2008 were as follows:
 
 
Americas
   
Europe
   
Asia
   
Total
 
Severance costs
  $ 628     $ 1,181     $ 1,396     $ 3,205  
Other exit costs
                270       270  
    $ 628     $ 1,181     $ 1,666     $ 3,475  
 
During 2008, the Company recognized $3.2 million of employee termination costs associated with the involuntary terminations of 377 employees in connection with reductions in workforce of certain facilities. The identified involuntary employee terminations by reportable geographic region amounted to approximately 149, 201 and 27 for the Americas, Asia and Europe, respectively.
 
66

 
The components of the restructuring charges during 2007 were as follows:
 
   
Americas
   
Europe
   
Asia
   
Total
 
Severance costs
  $ 759     $ 427     $ 189     $ 1,375  
Facility lease costs
    1,211                   1,211  
Other exit costs
    1,846       245             2,091  
    $ 3,816     $ 672     $ 189     $ 4,677  

During 2007, the Company recorded $1.4 million for severance costs associated with the involuntary terminations of 192 identified employees in connection with various facility closures, consolidations and resizing of certain facilities. The identified involuntary employee terminations by reportable geographic region amounted to approximately 138, 16 and 38 for the Americas, Asia and Europe, respectively. The Company also recorded approximately $1.2 million for facility lease obligations and approximately $2.1 million for other exit costs, including $1.5 million of asset impairments associated with the closure of certain leased facilities.

In connection with the Merger in 2007, a total of $7.0 million in integration costs were incurred during the year ended December 31, 2007. These costs included redundant operating costs that have been eliminated.

The following table summarizes the 2009 activity in the accrued restructuring balances related to the various restructuring activities described above:
 
                                     
   
Balance as of
December 31, 2008
   
Restructuring
Charges
   
Cash
Payment
   
Non-Cash
Activity
   
Foreign
Exchange
Adjustments
   
Balance as of
December 31,2009
 
2009 Restructuring:
                                   
    Severance
  $     $ 4,301     $ (3,143 )   $     $ (59 )   $ 1,099  
    Lease facility costs
          2,843       (371 )                 2,472  
    Other exit costs
          1,094       (745 )     (236 )           113  
            8,238       (4,259 )     (236 )     (59 )     3,684  
2008 Restructuring:
                                               
    Severance
    414       (67 )     (344 )           (3 )      
    Other exit costs
    228             (224 )           (3 )     1  
      642       (67 )     (568 )           (6 )     1  
2007 Restructuring:
                                               
    Lease facility costs
    745             (283 )     (89 )           373  
    Other exit costs
    447                   (39 )     7       415  
      1,192             (283 )     (128 )     7       788  
Total
  $ 1,834     $ 8,171     $ (5,110 )   $ (364 )   $ (58 )   $ 4,473  
 
67

 

The following table summarizes the 2008 activity in the accrued restructuring balances related to the various restructuring activities described above:
 
   
Balance as of
December 31,
2007
   
Restructuring
Charges
   
Cash
Payment
   
Non-Cash
Activity
   
Foreign
Exchange Adjustments
   
Balance as of
December 31,
2008
 
2008 Restructuring:
                                   
    Severance
  $     $ 3,205     $ (2,791 )   $     $     $ 414  
    Other exit costs
          270       (42 )                 228  
            3,475       (2,833 )                 642  
2007 Restructuring:
                                               
    Severance
    171             (171 )                  
    Lease facility costs
    1,819       (144 )     (806 )           (124 )     745  
    Other exit costs
    2,158       (568 )     (817 )     (452 )     126       447  
      4,148       (712 )     (1,794 )     (452 )     2       1,192  
Total
  $ 4,148     $ 2,763     $ (4,627 )   $ (452 )   $ 2     $ 1,834  
 
 
68


Note 17—Quarterly Financial Data (Unaudited)
The following table sets forth certain unaudited quarterly information with respect to the Company’s results of operations for the years 2009, 2008 and 2007. Earnings (loss) per share are computed independently for each of the quarters presented. Therefore, the sum of the quarterly earnings (loss) per share may not equal the total earnings (loss) per share amounts for the fiscal year.
   
2009 Quarter
 
      1st       2nd       3rd       4th  
Sales
  $ 496,767     $ 481,802     $ 510,461     $ 600,223  
Gross profit
    31,636       34,554       36,813       43,576  
Net income
    9,238       11,555       16,416       16,686  
Earnings per common share:
                               
  Basic
    0.14       0.18       0.25       0.26  
  Diluted
    0.14       0.18       0.25       0.26  
                       
     
2008 Quarter
 
      1st       2nd       3rd       4th  
Sales
  $ 684,309     $ 682,416     $ 641,672     $ 581,770  
Gross profit
    45,088       45,900       44,169       40,781  
Net income (loss)
    22,329       22,142       23,635       (203,738 )
Earnings (loss) per common share:
                               
  Basic
    0.32       0.33       0.36       (3.13 )
  Diluted
    0.32       0.33       0.35       (3.13 )
                       
     
2007 Quarter
 
      1st       2nd       3rd       4th  
Sales
  $ 752,482     $ 756,295     $ 672,595     $ 734,547  
Gross profit
    54,380       54,387       38,669       51,057  
Net income
    24,249       25,694       21,783       20,630  
Earnings per common share:
                               
  Basic
    0.34       0.35       0.30       0.29  
  Diluted
    0.34       0.35       0.30       0.29  

Note 18—Supplemental Cash Flow Information
The following is additional information concerning supplemental disclosures of cash payments.
 
   
Year ended December 31,
 
   
2009
   
2008
   
2007
 
Income taxes paid, net
  $ 6,170     $ 4,573     $ 1,414  
Interest paid
  $ 1,354     $ 1,420     $ 1,744  

69

 
Report of Independent Registered Public Accounting Firm

The Board of Directors and Shareholders
Benchmark Electronics, Inc.:

We have audited the accompanying consolidated balance sheets of Benchmark Electronics, Inc. and subsidiaries (the Company) as of December 31, 2009 and 2008, and the related consolidated statements of income (loss), comprehensive income (loss), shareholders’ equity and cash flows for each of the years in the three-year period ended December 31, 2009. These consolidated financial statements are the responsibility of the Company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of Benchmark Electronics, Inc. and subsidiaries as of December 31, 2009 and 2008, and the results of their operations and their cash flows for each of the years in the three-year period ended December 31, 2009, in conformity with U.S. generally accepted accounting principles.
 
We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Benchmark Electronics, Inc.’s internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated March 1, 2010 expressed an unqualified opinion on the effectiveness of the Company’s internal control over financial reporting.

(signed) KPMG LLP
Houston, Texas
March 1, 2010
 
70

 
Management’s Report

The management of Benchmark Electronics, Inc. has prepared and is responsible for the consolidated financial statements and related financial data contained in this report. The consolidated financial statements were prepared in accordance with U.S. generally accepted accounting principles and necessarily include certain amounts based upon management’s best estimates and judgments. The financial information contained elsewhere in this annual report is consistent with that in the consolidated financial statements.

The Company maintains internal accounting control systems that are adequate to prepare financial records and to provide reasonable assurance that the assets are safe-guarded from loss or unauthorized use. We believe these systems are effective, and the cost of the systems does not exceed the benefits obtained.

The Audit Committee, composed exclusively of independent, outside directors, has reviewed all financial data included in this report. The committee meets periodically with the Company’s management and independent registered public accountants on financial reporting matters. The independent registered public accountants have complete access to the Audit Committee and may meet with the committee, without management present, to discuss their audit results and opinions on the quality of financial reporting.

The role of independent registered public accountants is to render a professional, independent opinion on management’s financial statements to the extent required by the standards of the Public Company Accounting Oversight Board (United States). Benchmark’s responsibility is to conduct its affairs according to the highest standards of personal and corporate conduct.
 
71

 

None.


Conclusion Regarding the Effectiveness of Disclosure Controls and Procedures

As of the end of the period covered by this report, the Company’s management (with the participation of its chief executive officer and chief financial officer), conducted an evaluation pursuant to Rule 13a-15 promulgated under the Securities Exchange Act of 1934, as amended (the Exchange Act), of the effectiveness of the design and operation of the Company’s disclosure controls and procedures. Based on this evaluation, the Company’s chief executive officer and chief financial officer concluded that as of the end of the period covered by this report such disclosure controls and procedures were effective to provide reasonable assurance that information required to be disclosed by the Company in reports it files or submits under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the rules and forms of the Securities and Exchange Commission, and include controls and procedures designed to ensure that information required to be disclosed by the Company in such reports is accumulated and communicated to the Company’s management, including the Company’s chief executive officer and chief financial officer, as appropriate to allow timely decisions regarding required disclosure.

There has been no change in our internal control over financial reporting that occurred during the period covered by this Annual Report on Form 10-K that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

Our management, including our chief executive officer and chief financial officer, does not expect that our disclosure controls and internal controls will prevent all errors and all fraud. A control system, no matter how well conceived and operated, can provide only reasonable, not absolute, assurance that the objectives of the control system are met. Further, the design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Because of the inherent limitations in all control systems, no evaluation of controls can provide absolute assurance that all control issues and instances of fraud, if any, within the company have been detected. These inherent limitations include the realities that judgments in decision-making can be faulty, and that breakdowns can occur because of simple error or mistake. Additionally, controls can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the control. The design of any system of controls also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions; over time, a control may become inadequate because of changes in conditions, or the degree of compliance with the policies or procedures may deteriorate. Because of the inherent limitations in a cost-effective control system, misstatements due to error or fraud may occur and not be detected.
 
72

 
Management’s Report on Internal Control over Financial Reporting

Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Under the supervision and with the participation of our management, including our principal executive officer and principal financial officer, we conducted an evaluation of the effectiveness of our internal control over financial reporting based on the framework in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission. Based on our evaluation under the framework in Internal Control—Integrated Framework, our management concluded that our internal control over financial reporting was effective as of December 31, 2009.

The effectiveness of the Company’s internal control over financial reporting as of December 31, 2009 has been audited by KPMG LLP, an independent registered public accounting firm, as stated in their report which is included below.

Report of Independent Registered Public Accounting Firm on Internal Control over Financial Reporting

The Board of Directors and Shareholders
Benchmark Electronics, Inc.:

We have audited Benchmark Electronics, Inc.’s (the Companys) internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Benchmark Electronics, Inc.’s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in the accompanying Management’s Report on Internal Control over Financial Reporting. Our responsibility is to express an opinion on the Company’s internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
73


 
In our opinion, Benchmark Electronics, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2009, based on criteria established in Internal Control—Integrated Framework issued by the COSO.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets of Benchmark Electronics, Inc. and subsidiaries as of December 31, 2009 and 2008, and the related consolidated statements of income (loss), comprehensive income (loss), shareholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2009, and our report dated March 1, 2010, expressed an unqualified opinion on those consolidated financial statements.

(signed) KPMG LLP
Houston, Texas
March 1, 2010


Not applicable.



The information under the captions “Election of Directors,” “Executive Officers” and “Section 16(a) Beneficial Ownership Reporting Compliance” in the Company’s Proxy Statement for the 2010 Annual Meeting of Shareholders (the 2010 Proxy Statement), to be filed not later than 120 days after the close of the Company’s fiscal year, is incorporated herein by reference in response to this item.


The information under the captions “Compensation Discussion and Analysis” and “Report of Compensation Committee” in the 2010 Proxy Statement, to be filed not later than 120 days after the close of the Company’s fiscal year, is incorporated herein by reference in response to this item.
 
74


 

The information under the caption “Common Share Ownership of Certain Beneficial Owners and Management” in the 2010 Proxy Statement, to be filed not later than 120 days after the close of the Company’s fiscal year, is incorporated herein by reference in response to this item.

The following table sets forth certain information relating to our equity compensation plans as of December 31, 2009.
   
Number of
             
   
securities to be
   
Weighted-
   
Number of
 
   
issued upon
   
average exercise
   
securities
 
   
exercise of
   
price of
   
remaining
 
   
outstanding
   
outstanding
   
available
 
   
options, warrants
   
options, warrants
   
for future
 
Plan Category
 
and rights
   
and rights
   
issuance
 
Equity compensation plans approved by security holders
    5,584,328 (1)   $ 19.23 (1)     3,879,770 (2)
Equity compensation plans not approved by security holders (3)
    27,000     $ 13.75        
Total
    5,611,328               3,879,770  

(1) Includes 80,481 phantom stock awards. The weighted-average exercise price does not take these awards into account.

(2) Includes 3,659,270 equity awards under the 2000 Plan. The 2000 Plan expired February 16, 2010, and as of February 16, 2010 no addition grants under such plan can be made. See Note 8 of Notes to Consolidated Financial Statements in Item 8 of this report.

(3) In December of 1994, the Board of Directors adopted the Benchmark Electronics, Inc. 1994 Stock Option Plan for Non-Employee Directors (the 1994 Plan) for the benefit of members of the Board of Directors of Benchmark or its affiliates who are not employees of Benchmark or its affiliates (as defined in the 1994 Plan). The 1994 Plan was not required to be approved by our shareholders. All awards under the 1994 Plan were fully vested upon the date of grant. The exercise price per common share of options granted under the 1994 Plan was the fair market value of a Common Share on the date such option was granted. As of December 31, 2009, the Company has outstanding options with respect to 27,000 Common Shares under the 1994 Plan. The 1994 Plan was replaced in 2002, and no additional grants may be made under that plan.


The information under the caption “Election of Directors” in the 2010 Proxy Statement, to be filed not later than 120 days after the close of the Company’s fiscal year, is incorporated herein by reference in response to this item.


The information under the caption “Audit Committee Report to Shareholders” in the 2010 Proxy Statement, to be filed not later than 120 days after the close of the Company’s fiscal year, is incorporated herein by reference in response to this item.
 
75

 


(a) (1)  Financial statements of the Company filed as part of this report:

See Item 8 - Financial Statements and Supplementary Data.

     (2)  Financial statement schedule filed as part of this report:

Schedule II - Valuation Accounts
         
Additions
             
   
Balance at
                     
Balance at
 
   
Beginning
   
Charges to
               
End of
 
(in thousands)
 
of Period
   
Operations
   
Other
   
Deductions
   
Period
 
Year ended December 31, 2009:
                             
Allowance for doubtful accounts (1)
  $ 1,072       (51 )     (6 )     598       417  
Year ended December 31, 2008:
                                       
Allowance for doubtful accounts (1)
  $ 1,406       405       (10 )     729       1,072  
Year ended December 31, 2007:
                                       
Allowance for doubtful accounts (1)
  $ 1,430       91       5       120       1,406  

(1)
Deductions in the allowance for doubtful accounts represent write-offs, net of recoveries, of amounts determined to be
uncollectible.

Report of Independent Registered Public Accounting Firm on Schedule

The Board of Directors and Shareholders
Benchmark Electronics, Inc.:

Under date of March 1, 2010, we reported on the consolidated balance sheets of Benchmark Electronics, Inc. and subsidiaries (the Company) as of December 31, 2009 and 2008, and the related consolidated statements of income (loss), comprehensive income (loss), shareholders’ equity, and cash flows for each of the years in the three-year period ended December 31, 2009, in this annual report on Form 10-K for the year 2009. In connection with our audits of the aforementioned consolidated financial statements, we also audited the related consolidated financial statement schedule included in Item 15(a)2. This financial statement schedule is the responsibility of the Company’s management. Our responsibility is to express an opinion on this financial statement schedule based on our audits.

In our opinion, such financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

(signed) KPMG LLP
Houston, Texas
March 1, 2010
 
76

 
(3)  Exhibits

Each exhibit marked with an asterisk is filed with this Annual Report on Form 10-K.

 
 
Exhibit
Number
 
Description
2.1
--
Agreement and Plan of Merger dated October 16, 2006 among the Company, Autobahn Acquisition Corp. and Pemstar Inc. (incorporated by reference to Exhibit 2.1 to the Company’s Form 8-K dated October 16, 2006 and filed on October 18, 2006 (Commission file number 1-10560)).
   
 
3.1
--
Restated Articles of Incorporation of the Company dated May 10, 1990 (incorporated by reference to Exhibit 3.1 to the Company’s Registration Statement on Form S-1 (Registration Number 33-46316) (the “Registration Statement”)).
     
3.2
--
Amendment to the Restated Articles of Incorporation of the Company adopted by the shareholders of the Company on May 20, 1997 (incorporated by reference to Exhibit 3.3 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1998 (Commission file number 1-10560)).
     
3.3
--
Amendment to the Restated Articles of Incorporation of the Company approved by the shareholders of the Company on August 13, 2002 (incorporated by reference to Exhibit 4.7 to the Company’s Form S-8 (Registration Number 333-103183)).
     
3.4
--
Amended and Restated Bylaws of the Company dated May 18, 2006 (incorporated by reference to Exhibit 99.2 to the Company’s Form 8-K dated May 18, 2006 and filed on May 19, 2006 (Commission file number 1-10560)).
     
3.5
--
Amendment to the Restated Articles of Incorporation of the Company approved by the shareholders of the Company on May 10, 2006 (incorporated by reference to Exhibit 99.1 to the Company’s Form 8-K dated October 16, 2006 and filed on October 16, 2006 (Commission file number 1-10560)).
     
4.1
--
Restated Articles of Incorporation of the Company (incorporated by reference to Exhibit 3.1 to the Registration Statement).
     
4.2
--
Amendment to the Restated Articles of Incorporation of the Company adopted by the shareholders of the Company on May 20, 1997 (incorporated by reference to Exhibit 3.3 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1998 (Commission file number 1-10560)).
     
4.3
--
Specimen form of certificate evidencing the Common Share (incorporated by reference to Exhibit 4.3 to the Registration Statement).
     
4.4
--
Rights Agreement dated December 11, 1998 between the Company and Harris Trust Savings Bank, as Rights Agent, together with the following exhibits thereto: Exhibit A -- Form of Statement of Resolution Establishing Series A Cumulative Junior Participating Preferred Stock of Benchmark Electronics, Inc.; Exhibit B -- Form of Right Certificate; and Exhibit C -- Summary of Rights to Purchase Preferred Stock of Benchmark Electronics, Inc. (incorporated by reference to Exhibit 1 to the Company’s Form 8A12B filed December 11, 1998 (Commission file number 1-10560)).
 
77

 
4.5
--
Statement of Resolution Establishing Series A Cumulative Junior Participating Preferred Stock of the Company (incorporated by reference to Exhibit B of the Rights Agreement dated December 11, 1998 between the Company and Harris Trust Savings Bank, as Rights Agent, included as Exhibit 1 to the Company’s Form 8A12B filed December 11, 1998 (Commission file number 1-10560)).
   
4.6
--
Summary of Rights to Purchase Preferred Stock of the Company (incorporated by reference to Exhibit 3 to the Company’s Form 8A12B/A filed December 22, 1998 (Commission file number 1-10560)).
   
4.7
--
Amendment to the Restated Articles of Incorporation of the Company approved by the shareholders of the Company on August 13, 2002 (incorporated by reference to Exhibit 4.7 to the Company’s Form S-8 (Registration Number 333-103183)).
   
4.8
--
Amended and Restated Bylaws of the Company (incorporated by reference to Exhibit 99.2 to the Company’s Form 8-K dated May 18, 2006 and filed on May 19, 2006 (Commission file number 1-10560)).
   
   
4.9
--
Amendment to the Restated Articles of Incorporation of the Company approved by the shareholders of the Company on May 10, 2006 (incorporated by reference to Exhibit 99.1 to the Company’s Form 8-K dated October 16, 2006 and filed on October 16, 2006 (Commission file number 1-10560)).
   
   
4.10
--
Amendment No. 1 dated as of December 10, 2008, to the Rights Agreement dated as of December 11, 1998 (incorporated by reference to Exhibit 4.1 to the Company’s Form 8-K dated December 10, 2008 and filed on December 11, 2008 (Commission file number 1-10560))
 
 
 
10.1
--
Form of Indemnity Agreement between the Company and its directors and executive officers (incorporated by reference to Exhibit 10.1 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2003 (Commission file number 1-10560)).
 
 
10.2
--
Benchmark Electronics, Inc. 1994 Stock Option Plan for Non-Employee Directors (incorporated by reference to Exhibit 10.21 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1994 (Commission file number 1-10560)).
   
   
10.3
--
First Amendment to the Benchmark Electronics, Inc. 1994 Stock Option Plan for Non-Employee Directors (incorporated by reference to Exhibit 99.2 to the Company’s Form S-8 (Registration Number 333-103183)).
     
10.4
--
Benchmark Electronics, Inc. 2000 Stock Awards Plan (incorporated by reference to Exhibit 4.8 to the Company’s Registration Statement on Form S-8 (Registration Number 333-54186)).
     
10.5
--
Form of incentive stock option agreement for use under the 2000 Stock Awards Plan (incorporated by reference to Exhibit 4.8 to the Company’s Registration Statement on Form S-8 (Registration Number 333-54186)).
     
10.6
--
Form of phantom stock agreement for use under the 2000 Stock Awards Plan.
     
10.7
--
Form of nonqualified stock option agreement for use under the 2000 Stock Awards Plan.
 
78

 
10.8
--
Form of restricted stock agreement for use under the 2000 Stock Awards Plan (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated March 17, 2008 (Commission file number 1-10560)).
     
10.9
--
Benchmark Electronics, Inc. Deferred Compensation Plan dated as of December 16, 2008 (incorporated by reference to Exhibit 99.1 to the Company’s Form S-8 (Registration Number 333-156202)).
   
10.10
--
Lease Agreement dated June 1, 2000 between Industrial Properties of the South and the Company (incorporated by reference to Exhibit 10.12 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2000 (Commission file number 1-10560)).
     
10.11
--
Guarantee dated September 10, 1998 by the Company in favor of Kilmore Developments Limited (incorporated by reference to Exhibit 10.14 to the Company’s Annual Report on Form 10-K for the year ended December 31, 1998 (Commission file number 1-10560)).
   
10.12
--
Lease Agreement dated March 9, 2001 by and between BEI Electronics Ireland Limited and Canada Life Assurance (Ireland) Limited (incorporated by reference to Exhibit 10.24 to the Company’s Annual Report on Form 10-K for the year ended December 31, 2000 (Commission file number 1-10560)).
   
10.13
--
Third Amended and Restated Credit Agreement dated as of December 21, 2007 among the Company; the borrowing subsidiaries; the lenders party thereto; JPMorgan Chase Bank, N.A. as administrative agent, collateral agent and issuing lender; Bank of America, N.A., Wells Fargo Bank, N.A. and Comerica Bank as co-documentation agents; and J.P. Morgan Securities Inc. as lead arranger (incorporated by reference from Exhibit 10.1 to the Company’s Form 8-K dated December 21, 2007 and filed on December 27, 2007 (Commission file number 1-10560)).
   
10.14
--
Employment Agreement between the Company and Cary T. Fu effective December 1, 2005 (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated November 11, 2005 and filed on November 15, 2005 (Commission file number 1-10560)).
 
 
10.15
--
Employment Agreement between the Company and Gayla J. Delly effective December 1, 2005 (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated November 11, 2005 and filed on November 15, 2005 (Commission file number 1-10560)).
   
10.16
--
Employment Agreement between the Company and Donald F. Adam dated as of March 10, 2009 (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated March 10, 2009 (Commission file number 1-10560)).
   
10.17
--
Benchmark Electronics, Inc. 2002 Stock Option Plan for Non-Employee Directors (incorporated by reference to Appendix A to the Company’s Definitive Proxy Statement on Schedule 14A filed April 15, 2002 (Commission file number 1-10560)).
   
10.18
--
Employment Agreement between the Company and Donald E. Nigbor effective January 1, 2006 (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated November 30, 2005 and filed on December 2, 2005 (Commission file number 1-10560)).
   
10.19
--
Employment Agreement between the Company and Steven A. Barton effective December 1, 2005 (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated December 1, 2005 and filed on December 2, 2005 (Commission file number 1-10560)).
   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
79

 
10.20*
--
Code of Conduct.
     
10.21
--
Amendment No. 1 to the Benchmark Electronics, Inc. 2002 Stock Option Plan for Non-Employee Directors (incorporated by reference to Exhibit 99.3 to the Company’s Form 8-K dated May 18, 2006 filed on May 19, 2006 (Commission file number 1-10560)).
     
10.22
--
Form of Termination Agreements dated November 4, 2008 between the Company and Steven A. Barton and Donald E. Nigbor (incorporated by reference to Exhibit 10.1 to the Company’s Form 8-K dated November 4, 2008 (Commission file number 1-10560)).
     
10.23
--
Form of Consulting Agreements dated November 4, 2008 between the Company and Steven A. Barton and Donald E. Nigbor (incorporated by reference to Exhibit 10.2 to the Company’s Form 8-K dated November 4, 2008 (Commission file number 1-10560)).
     
11
--
Statement regarding Computation of Per-Share Earnings (incorporated by reference to “Notes to Consolidated Financial Statements, Note 1(j) – Earnings Per Share” in Item 8 of this report).
     
21*
--
Subsidiaries of Benchmark Electronics, Inc.
     
23*
--
Consent of Independent Registered Public Accounting Firm concerning incorporation by reference in the Company’s Registration Statements on Form S-8 (Registration No. 333-28997, No. 333-54186, No. 333-103183, No. 333-101744, No. 333-136798 and No. 333-156202).
     
31.1*
--
Section 302 Certification of Chief Executive Officer
     
31.2*
--
Section 302 Certification of Chief Financial Officer
     
32.1*
--
Section 1350 Certification of Chief Executive Officer
     
32.2*
--
Section 1350 Certification of Chief Financial Officer
 
* Filed herewith.
 
80

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.
 
  BENCHMARK ELECTRONICS, INC.  
       
 
By:
/s/ Cary T. Fu  
   
Cary T. Fu
 
    Chief Executive Officer  
    Date: February 26, 2010  

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities indicated and on the dates indicated.
 
Name
Position
Date
     
 
Chairman of the Board and
 
/s/ Cary T. Fu
Chief Executive Officer
February 26, 2010
Cary T. Fu
(principal executive officer)
 
     
/s/ Donald F. Adam
Chief Financial Officer
February 26, 2010
Donald F. Adam
(principal financial and accounting officer)
 
     
/s/ Michael R. Dawson
Director
February 26, 2010
Michael R. Dawson
   
     
/s/ Peter G. Dorflinger
Director
February 26, 2010
Peter G. Dorflinger
   
     
/s/ Douglas G. Duncan
Director
February 26, 2010
Douglas G. Duncan
   
     
/s/ Laura W. Lang
Director
February 26, 2010
Laura W. Lang
   
     
/s/ Bernee D.L. Strom
Director
February 26, 2010
Bernee D.L. Strom
   
     
/s/ Clay C. Williams
Director
February 26, 2010
Clay C. Williams
   

81