Attached files

file filename
EX-32.1 - CERTIFICATION OF CEO PURSUANT TO 18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002 - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex32-1.htm
EX-10.1 - AMENDMENT TO LOAN AGREEMENT, DATED 12-MARCH-2008 BETWEEN UTAH MEDICAL PRODUCTS LIMITED AND BANK OF IRELAND - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex10-1.htm
EX-32.2 - CERTIFICATION OF PRINCIPAL FINANCIAL OFFICER PURSUANT TO 18 U.S.C. SECTION 1350, AS ADOPTED PURSUANT TO SECTION 906 OF THE SARBANES-OXLEY ACT OF 2002 - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex32-2.htm
EX-31.1 - CERTIFICATION OF CEO PURSUANT TO RULE 13A-14(A) AS ADOPTED PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002 - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex31-1.htm
EX-10.3 - SUMMARY OF OFFICER AND DIRECTOR COMPENSATION - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex10-3.htm
EX-10.2 - GUARANTEE AND INDEMNITY, DATED 13-JUNE-2008, BY UTAH MEDICAL PRODUCTS, INC. TO BANK OF IRELAND - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex10-2.htm
EX-31.2 - CERTIFICATION OF PRINCIPAL FINANCIAL OFFICER PURSUANT TO RULE 13A-14(A) AS ADOPTED PURSUANT TO SECTION 302 OF THE SARBANES-OXLEY ACT OF 2002 - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex31-2.htm
EX-23.1 - CONSENT OF JONES SIMKINS, P.C., COMPANY'S INDEPENDENT AUDITORS FOR THE YEARS ENDED DECEMBER 31, 2008, DECEMBER 31, 2007 AND DECEMBER 31, 2006 - UTAH MEDICAL PRODUCTS INCutmd10ka123108ex23.htm



UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, D.C.  20549
 
FORM 10-K /A
Amendment No. 1

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended December 31, 2008
 
Commission File Number: 000-11178
 
UTAH MEDICAL PRODUCTS, INC.
(Exact name of registrant as specified in its charter)
 
Utah
87-0342734
(State or other jurisdiction of
(I.R.S. Employer
incorporation or organization)
Identification No.)
   
7043 S 300 W, Midvale Utah
84047
(Address of principal executive offices)
(Zip Code)
   
Registrant's telephone number, including area code:
Telephone (801) 566-1200
 
Facsimile (801) 566-7305
Securities registered pursuant to Section 12(b) of the Act:
Title of each class
Name of each exchange on which registered
Common Stock, $.01 Par Value
The NASDAQ Global Market
Preferred Stock Purchase Rights
 

Securities registered pursuant to Section 12(g) of the Act:
(Title of Class)
None
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
 
Yes o   No x
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.
Yes o   No x
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Exchange Act during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.     Yes x   No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (Section 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company.  See the definitions of "large accelerated filer," "accelerated filer" and "smaller reporting company" in Rule 12b-2 of the Exchange Act.
Large accelerated filer o
Accelerated filer x
Non-accelerated filer o
Smaller reporting company o
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o   No x
 
State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant's most recently completed second fiscal quarter.  As of June 30, 2008, the aggregate market value of the voting and nonvoting common equity held by nonaffiliates of the registrant was $99,134,000.
 
Indicate the number of shares outstanding of each of the registrant's classes of common stock, as of the latest practicable date.  As of March 5, 2009, common shares outstanding were 3,607,000.
 
DOCUMENTS INCORPORATED BY REFERENCE.  The Company's definitive proxy statement for the Annual Meeting of Shareholders is incorporated by reference into Part III, Item 10, 11, 12, and 13, and 14 of this Form 10-K.

 
 

 

INDEX TO FORM 10-K


     
PAGE
PART I
   
 
Item 1
Business
1
 
Item 1A
Risk Factors
11
 
Item 1B
Unresolved Staff Comments
12
 
Item 2
Properties
12
 
Item 3
Legal Proceedings
12
 
Item 4
Submission of Matters to a Vote of Security Holders
12
       
PART II
   
 
Item 5
Market for Registrant's Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities
13
 
Item 6
Selected Financial Data
14
 
Item 7
Management's Discussion and Analysis of Financial Condition and Results of  Operations
15
 
Item 7A
Quantitative and Qualitative Disclosures About Market Risk
24
 
Item 8
Financial Statements and Supplementary Data
25
 
Item 9
Changes in and Disagreements With Accountants on Accounting and Financial Disclosure
43
 
Item 9A
Controls and Procedures
43
 
Item 9B
Other Information
43
       
       
PART III
   
 
Item 10
Directors, Executive Officers and Corporate Governance
44
 
Item 11
Executive Compensation
44
 
Item 12
Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters
44
 
Item 13
Certain Relationships and Related Transactions, and Director Independence
45
 
Item 14
Principal Accounting Fees and Services
45
     
 
     
 
PART IV
 
 
 
Item 15
Exhibits, Financial Statement Schedules
  46
     
 
SIGNATURES
 48



 
 

 

PART I

ITEM 1 - BUSINESS

Dollar amounts throughout this report and where noted, are in thousands except per-share amounts.

Utah Medical Products, Inc. ("UTMD" or "the Company") is in the business of producing high quality cost-effective medical devices that are predominantly proprietary, disposable and for hospital use.  Success depends on 1) recognizing needs of clinicians and patients,  2) rapidly designing or acquiring economical solutions that gain premarketing regulatory concurrence,  3) reliably producing products that meet those clinical needs, and then  4) selling through
 
a)
UTMD's own direct channels into markets where the Company enjoys an established reputation and has a critical mass of sales and support resources, or
 
b)
establishing relationships with other medical companies that have the resources to effectively introduce and support the Company's products.

UTMD's success in providing reliable solutions comes from its proven ability to integrate a number of engineering and technical disciplines in electronics, software, mechanical packaging, instrumentation, plastics processing and materials.   The resulting proprietary products represent significant incremental improvements in patient safety, clinical outcomes and/or total cost over preexisting clinical tools. UTMD's experience is that, in the case of labor-saving devices, the improvement in cost-effectiveness of clinical procedures also leads to an improvement in overall healthcare including lower risk of complications.  UTMD markets a broad range of medical devices used in critical care areas, especially the neonatal intensive care unit (NICU), the labor and delivery (L&D) department and the women's health center in hospitals, as well as products sold to outpatient clinics and physician's offices.

The opportunity to apply solutions to recognized needs results from an excellent core of practicing clinicians who introduce ideas to the Company, and key employees who are both clinical applications savvy and development engineering adept.

UTMD's products are sold directly to end users in the U.S. domestic market by the Company's own direct sales representatives and independent manufacturers' representatives.  In addition, some of UTMD's products are sold through specialty distributors, national hospital distribution companies and other medical device manufacturers.  Internationally, products are sold through other medical device companies and through independent medical products distributors.  UTMD has representation in all major developed countries through 117 international distributors, each of which purchased at least five thousand dollars in UTMD products during 2008.

UTMD was formed as a Utah corporation in 1978.  UTMD sold stock to the public one time in 1982 for $1,750 (before offering costs of $321).  Since 1992, UTMD has returned $111,622 in the form of share repurchases, and an additional $15,123 in the form of cash dividends, to its public shareholders.

In 1995, Utah Medical Products Ltd., a wholly-owned subsidiary with manufacturing located in Ireland, was formed to better serve UTMD's international customers. In 1997, UTMD purchased Columbia Medical, Inc. (CMI), a Redmond, Oregon company specializing in silicone injection molding, assembly and marketing vacuum-assisted obstetrical delivery systems.  In 1998, UTMD acquired the neonatal product line of Gesco International, a subsidiary of Bard Access Systems and C.R. Bard, Inc.  In 2004, UTMD acquired Abcorp, Inc., its supplier of fetal monitoring belts.  Sales of the products, or derivatives of the products, from the three acquisitions noted above, comprised about 35% of UTMD's 2008 sales.  The net book value of intangible assets (goodwill) remaining on UTMD's balance sheet at the end of 2008 resulting from the three acquisitions, as a ratio of sales, was 26%.

UTMD's corporate offices are located at 7043 South 300 West, Midvale, Utah 84047 USA.  The corporate office telephone number is (801) 566-1200.  Ireland operations are located at Athlone Business and Technology Park, Athlone, County Westmeath, Ireland.  The Ireland telephone number is 353 (90) 647-3932.  CMI's mailing address is 1830 S.E. 1st, Redmond, Oregon  97756.  The Oregon telephone number is (541) 548-7738.

 
1

 

PRODUCTS

Labor and Delivery/ Obstetrics:
Fetal Monitoring Accessories.
The majority of births are considered "higher risk" due to lack of prenatal care, or use of anesthesia, among other factors.  In many of these births, labor may become complicated and does not progress normally.  The obstetrician or perinatologist must assess progression of labor to be able to intervene with drug therapy, infuse a solution to augment amniotic fluid, or ultimately if necessary, perform an operative procedure, and then be prepared for complications immediately following childbirth.

To assist the physician in controlling the effectiveness of administration of oxytocin and monitoring effects of amnioinfusion, contraction intensities, uterine resting tones and peak contraction pressures are closely monitored through the use of an invasive intrauterine pressure catheter system.  In addition, to help identify the possible onset of fetal hypoxia, correlation of the changes in fetal heart rate (FHR) relative to the frequency and duration of contractions are often electronically monitored.  UTMD's intrauterine pressure (IUP) catheters provide for clinician choices from a traditional fluid-filled system to INTRAN® PLUS, the most widely accepted transducer-tipped system.  In addition, adjunct FHR electrodes, leg plates, toco belts and chart paper are provided by UTMD to complete a package of fetal monitoring supplies.  UTMD's IUP catheters include:

 
IUP-075 and UTMD's other custom fluid-filled clear catheter kits utilize a saline-filled catheter that is placed within the uterine cavity, connected to a separate external reusable or disposable transducer.  This product package, utilizing double lumen catheters, was the traditional mode of intrauterine monitoring prior to the introduction of INTRAN.  An intrauterine pressure change is transmitted through the fluid column to the external pressure transducer.

 
Introduced in 1987, INTRAN was the first disposable intrauterine pressure catheter that placed the pressure transducer at the pressure source within the uterine cavity.  This design eliminated the complicated setup of fluid-filled systems and provided more accurate pressure waveforms.  INTRAN I was discontinued in 1995 in favor of the more widely preferred INTRAN PLUS, also covered by UTMD's original INTRAN patent.

 
INTRAN PLUS was introduced in 1991.  The INTRAN PLUS catheter combines the transducer tip concept of INTRAN I with a refined tip design, a zeroing switch that allows the clinician to reset the reference of the monitor, and a dedicated amnio lumen which provides access to the amniotic fluid environment which may be helpful in the diagnosis and intervention of certain fetal conditions.  In 1996, a viewport enhancement which allows physicians to observe amniotic fluid in a closed system was added to INTRAN PLUS.  In 1997, UTMD introduced several variations to allow user preferences in tip size, zero switch location and amniotic fluid visualization.

UTMD markets tocodynamometer belts, disposable electrodes, catheters and accessories as outlined above, but does not currently market electronic monitors, the capital equipment that process the electrical signals.  In addition to products currently offered, UTMD intends to continue to investigate and introduce tools that enhance fetal monitoring techniques.

Vacuum-Assisted Delivery Systems (VAD).
UTMD's VAD Systems include CMI® patented soft silicone bell-shaped birthing cups and patented hand-held vacuum pumps which UTMD believes are the safest products available for use in vacuum-assisted operative deliveries.  UTMD's patented soft silicone cup is a bell-shaped cup design that should be preferred for fetal well-being in low or outlet fetal stations with occiput anterior presentations, which represent more than 90% of the cases where VAD is indicated.  Operative vaginal deliveries using forceps or vacuum-assisted delivery systems provide knowledgeable physicians with a trial vaginal operative delivery prior to a more invasive C-section intervention.  Although there are risks associated with vaginal operative deliveries which may currently represent 5-9% of all U.S. hospital births, the procedures are generally regarded as safer for the mother, and at least as safe for the fetus, as abdominal (Cesarean) delivery in comparable clinical situations.  UTMD estimates that the VAD operative approach is used for about 4-8% of all U.S. births, with forceps continuing to lose ground as the alternative.  UTMD's patented bell-shaped soft silicone TENDER TOUCH® cups enjoy a low reported complication rate compared to other vacuum cup designs, as evidenced by the FDA Medical Device Reporting System which reports injuries from specific names of products used in hospitals.

 
2

 
 
Other Obstetrical Tools.
AROM-COT is a finger cover with a patented prong design to rupture maternal membranes with less patient pain and anxiety.  MUC-X is an aspiration device used immediately after birth to clear neonatal respiratory passages and reduce exposure to potential infections.  CORDGUARD® is a product which unifies the multiple steps of clamping the neonate's cord close to the umbilicus, severing the cord without splattering blood, drawing a clean cord blood sample, and assisting in the removal of the placenta.  CORDGUARD's sharpless, closed system reduces the risk of exposure to potentially infected blood, and consequently reduces the high cost of exposure treatment under OSHA and CDC guidelines.  In addition, CORDGUARD facilitates obtaining neonatal blood that is otherwise hard to obtain safely and cleanly.  BT-Cath, patent pending, is a uterine balloon tamponade catheter for controlling severe postpartum hemorrhage.  Its benefits include the ease of rapid deployment and ability to monitor further bleeding after the tamponade has been placed.  Abcorp toco belts and straps for fetal monitoring by an external tocodynamometer are provided in latex-free form in several configurations.

Neonatal Intensive Care:
DISPOSA-HOOD
The DISPOSA-HOOD is an infant respiratory hood that is used in the NICU to administer oxygen to neonates and flush CO2 (carbon dioxide) while maintaining a neutral thermal environment critical to proper physiologic responses.  The DISPOSA-HOOD, placed over the infant's head, incorporates a round diffusor connection specifically designed to disperse the incoming gases along the inner surfaces of the hood, rather than allowing them to blow directly on the infant's head.  The design allows more precise FIO2 (fractional inspired oxygen) control, minimizes convective heat loss from the head and provides optimum flows for elimination of CO2 by ventilation. DISPOSA-HOOD, in contrast to an incubator, allows for excellent access to and visualization of the underdeveloped infant.  Because it is a disposable product, it also prevents cross-contamination.

DELTRAN® PLUS
UTMD's DELTRAN blood pressure monitoring system has been adapted specifically for use in the NICU.  The streamlined version eliminates needles used for blood sampling, avoids the loss of scarce neonatal blood volume and provides a closed system that reduces the risk of infection.  The system features excellent visualization of clearing volume, and one-handed use.

GESCO®
In the third quarter of 1998, UTMD acquired the neonatal product line of Gesco International.  GESCO, best known for innovative silicone catheters, gained an early distinctive reputation for its focus on the special developmental needs of tiny, critically-ill babies.

A class of catheters called umbilical vessel catheters (UVCs) are specially designed for administering vital medications and fluids immediately following birth through the infant's umbilical vessel into the inferior vena cava.  Because of the neonate's small size and lack of vascular development, there is no better access to vital organs.  The catheters are also called umbilical artery catheters (UACs) when placed in one of the umbilical arteries to measure blood pressure or monitor metabolic processes through blood analysis.  In developing its UMBILI-CATH product line, Gesco pioneered the use of soft, biocompatible silicone catheters, helping to reduce the number of insertions required as well as other complications associated with invasive applications.  UTMD has expanded the UVC product line to include catheters made from a proprietary thermosensitive polyurethane (Tecoflex®) that offers many of the flexibility and biocompatibility advantages of silicone after insertion, with the greater rigidity of polyurethane preferred by many clinicians for insertion. In addition, GESCO provides a convenient catheterization procedure tray of implements and supplies necessary to place UVC catheters, as well as perform other similar procedures.

The primary distinction of GESCO products is that they were developed with the special needs of the neonate in mind, not just cut-down or smaller versions of adult devices.  For example, in the case of invasive catheters, the introducer, the soft rounded distal tip, mode of securing to the patient after insertion to avoid migration, luer-locking hub with minimal dead space, number of lumens, catheter radiopaque striping for visualization, variations in catheter lengths and diameters and special packaging are all features specially designed for neonates.  UTMD continues to modify product features to incorporate current neonatal nurse practitioner preferences.

 
3

 

The soft, biocompatible silicone catheter concept had important advantages in other applications including peripherally inserted central venous catheters (PICC lines), enteral feeding tubes, urinary drainage catheters, and chest drainage tubes.  GESCO developed and marketed initial versions of all of these neonatal products.  In order to keep pace with the trend of caring for smaller babies, UTMD has added smaller diameter versions of its URI-CATH® and NUTRI-CATH® products.  In 2000, UTMD gained FDA premarketing clearance of a new PICC family of products specifically designed to minimize trauma to the critically ill neonate, named PICC-NATE®.  The PICC-Nate product line was designed with the input of experienced neonatal nurse practitioners for use as a long-term indwelling catheter system for single-use, therapeutic central venous infusion of drug solutions, blood products or other fluids and for blood sampling.  The soft, strong silicone PICC-Nate comes in two diameter sizes and two hub configurations.  In early 2003, UTMD added a Tecoflex polyurethane version that offers many of the flexibility and biocompatibility advantages of silicone after insertion, with the greater rigidity of polyurethane preferred by many clinicians for insertion.  In 2006, UTMD developed a unique enteral feeding-only extension set that addresses important safety risks in the NICU - inadvertent connections with IV lines and inadvertent disconnections of components of the system spanning the dispensing container through the infusion catheter.  Nutri-Lok®, patent pending, was launched to the market in January 2007.  In October 2007, UTMD added dispensing syringes with interlocking connectors to its Nutri-Cath/Lok family of devices.  In 2008, UTMD further expanded the Nutri-Lok system with specialty extension sets for GI tubes and for continuous feeding connection to a fluid pump.

In 2006, UTMD completed the replacement of all DEHP plasticizer PVC materials in its Gesco product line that may come in contact with neonatal patients, addressing another evolving safety concern related specifically to the possible maldevelopment of male neonates.

Other GESCO specialty products include a disposable peritoneal dialysis set that is a pre-assembled, sterile, closed system, called DIALY-NATE®;  a patented silicone oral protection device used to prevent palatal soft tissue injury by orotracheal tubes, called PALA-NATE®; and a lumbar sampling kit with a tiny, specially-beveled needle for obtaining cerebral spinal fluid samples, called MYELO-NATE®.

GESCO's first patented product, HEMO-NATE®, is a disposable filter designed to remove microaggregates from stored blood prior to transfusion into a neonate where any deficiency can have an overwhelmingly negative impact on a neonate's chances for survival, given an under-developed vasculature and small total blood volume.  In 2001, UTMD introduced a new filter and an improved blood bag spike for Hemo-Nate, and a needleless version.

In 2009, UTMD will continue to improve and expand its neonatal product line, seeking to reinforce a reputation as having the most developmentally-friendly NICU specialty products in the medical device industry.  In addition to products already offered and being developed internally, UTMD will look to continue to expand sales through international distribution arrangements, and through selective complementary product acquisitions.

Gynecology /Urology /Electrosurgery:
LETZ® System
The LETZ System (loop excision of the transformation zone) is used to excise cervical intraepithelial neoplasia (CIN) and other lower genital tract lesions related to human papilloma virus (HPV) infections.  The electrosurgery procedure with hemostasis has become the standard of care for HPV cervical infection treatment, replacing cold knife scalpel, laser and cryotherapy procedural approaches because it is economical, safe, effective, quick and easy to perform, has fewer potential side effects, and requires little physician training.  A major incentive for performing the LETZ procedure is that it may be performed using local anesthetic in a physician's office, eliminating the time and expense of hospital or surgical center admittance.  Most importantly clinically, in contrast to laser (tissue ablation) and cryotherapy (freezing of tissue), LETZ provides a fine tissue specimen for pathological assessment.

UTMD's LETZ System includes patented disposable electrodes, the patented FINESSE® electrosurgical generator, and other miscellaneous components.  A disposable loop electrode used to excise the tissue specimen is a pencil-like tube with a thin tungsten wire loop attached.  The loop is available in varying sizes and includes a patented Safe-T-Gauge® that can be positioned so the physician can accurately colposcopically monitor the amount of tissue being excised.  UTMD continues to augment its specialty electrodes.  For example, the Company introduced a patented conization electrode for deep endocervical disease called C-LETZ®, designed to limit the removal of healthy tissue margins that might compromise adequate cervical function.  UTMD also will continue to provide adapters and other components which allow its market-leading specialty electrodes to be used with other manufacturers' electrosurgical generators.  The FINESSE electrosurgical generator is the only generator on the market that contains an integral smoke evacuator, required to filter smoke and vapors that contain potentially hazardous particulate material produced during electrosurgery.

 
4

 

As a result of the 2007 American Society for Colposcopy and Cervical Pathology (ASCCP) revised guidelines for the treatment of CIN, which advised greater monitoring of lower grade lesions in lieu of surgical treatment, UTMD has observed approximately a 10% decline in use of LETZ electrodes from a consistent gynecology customer base.  The effect of the new guidelines now seems to have stabilized.

FINESSE® Generator; Specialty Loop, Ball, and Needle Electrodes; FILTRESSE® Evacuator; Other Specialty Electrodes; Other Supplies and Gynecologic Tools.
UTMD has FDA clearance to market its electrosurgical system and tools for use in general surgery applications, including dermatology, plastic surgery and otolaryngology.  In 2002, UTMD introduced a product line of ultra-fine tipped microdissection needles, called OptiMicro Needles.  These electrosurgical needles are particularly useful in small-scale plastic and reconstructive surgery applications.  FILTRESSE is a stand-alone surgical smoke filtration system that combines high filtration efficiency, low cost and convenient use in a surgical office setting. Other electrosurgery tools and accessories include disposable electrosurgical pens, dispersive pads, footswitches, filter packs, speculums, retractors, forceps, tenacula and hooks.  UTMD acquired the distribution rights to a unique reusable four-way expander system which facilitates access to, and visualization of, the cervix, eliminating the need for less effective specula and lateral retractors.  In 2007, UTMD developed OptiSpec®, patent-pending, an ultra-bright light for cervical visualization without physician distraction during exams, pap smears and other vaginal procedures requiring direct cervical visualization without the use of a colposcope.

EPITOME®
EPITOME is a patented electrosurgical scalpel which delivers precise performance in incision and excision with hemostasis while minimizing thermal side effects.  Where rapid yet precise dissection of dense tissue is necessary, such as in mammaplasty or abdominoplasty, UTMD believes that EPITOME has no close substitute.  Furthermore, an independent study concludes that the EPITOME scalpel provides a significant improvement over older devices in wound healing and patient comfort.  EPITOME allows a rapid incision without countertraction, yielding limited morbidity, less post-surgical pain and cosmetically superior results.   EPITOME is useful where minimization of thermal tissue injury is important but control of bleeding needed.  A patented bendable version of EPITOME with a smaller active electrode was introduced in 1998.  Designed to significantly reduce the chance of tissue burns due to inadvertent electrode contact and where a smaller, bent scalpel tip is needed, the bendable EPITOME is of particular value, e.g., to thoracic surgeons in harvesting the internal mammary artery during coronary artery bypass surgery, as well as to otolaryngologists for tonsillectomies or uvulapalatalplasties.

LIBERTY® System
LIBERTY is a device for the conservative treatment and effective control of urinary incontinence in women.  UTMD believes that LIBERTY is the easiest-to-use, most cost effective incontinence treatment available that yields a therapeutic effect, not just a cover-up. LIBERTY consists of a battery operated electrical stimulation unit and an intravaginal electrode probe.  This physiotherapy technique, which can be done in the privacy of the home, involves passive strengthening of the periurethral muscles.  Pulsed, low voltage, high frequency current is applied primarily to the pudendal neuromuscular tissue causing the pelvic area muscles to contract, leading to better muscle tone.  Because electrical stimulation has no known adverse side effects, LIBERTY provides women suffering from mild to moderate incontinence an effective, lower cost and lower risk alternative to more traumatic treatments such as surgery and drug therapy.

PATHFINDER PLUS
PATHFINDER PLUS is a proprietary endoscopic irrigation device that allows a uro/gyn surgeon to precisely irrigate, clearing the visual field, with the same hand that controls the endoscope, eliminating the need for a separate assistant to irrigate without visualization.  An example of a procedure where Pathfinder has found success is ureteroscopic stone ablation.

 
5

 

ENDOCURETTE
In cooperation with Mayo Clinic, UTMD developed an advanced curette for uterine endometrial tissue sampling in the doctor's office.  The sampling procedure is intended primarily to rule out precancer or cancerous change of the uterus in premenopausal women with abnormal uterine bleeding, or women with postmenopausal bleeding.  The device is part of a class of catheters designed to be used without dilitation of the cervix and without general anesthetic.  The inherent weakness of this type of device, which is related to its small size, is that it may not remove enough tissue of the endometrium for an accurate histologic assessment, in contrast to a more invasive D&C hospital procedure.  The patented tip of the EndoCurette was designed to obtain a more thorough tissue specimen without the need for dilitation, and without an increase in patient discomfort.

TVUS/HSG-Cath
In order to further assess persistent abnormal or dysfunctional uterine bleeding and other suspected abnormalities of the uterus, or as a next step after endometrial tissue sampling with an EndoCurette, gynecologists are increasingly utilizing transvaginal ultrasound imaging of the uterus.  UTMD's TVUS/HSG-Cath was designed to provide effective cervical occlusion that allows distention of the uterus to differentiate anterior and posterior endometrium, among other irregularities, together with minimal visual obstruction of the uterus near the internal os.  In addition, the TVUS/HSG-Cath may be used in hysterosalpingography radiographic procedures to assess the patency of fallopian tubes.  A patent has been filed on the design of the TVUS/HSG-Cath, which was released for marketing in October 2007.

LUMIN®
LUMIN® is a patented gynecological tool developed by UTMD for reliably and safely manipulating the uterus in laparoscopic procedures.  LUMIN combines the strength, range of motion and versatility of the higher end reusable instruments with the lower cost and cleanliness of the inexpensive less functional disposable instruments presently on the market, while at the same time reducing the number of tools needed to move and secure the uterus.

Blood Pressure Monitoring:
DELTRAN® Disposable Pressure Transducer (DPT)
In pressure monitoring, a transducer is used to convert physiological (mechanical) pressure into an electrical signal that is displayed on electronic monitoring equipment.  UTMD developed, patented and is now distributing its disposable transducer as a stand-alone product, and as a component in sterile blood pressure monitoring kits through direct representatives and other medical companies in the U.S., as well as independent distributors and other medical device companies internationally.

The Company believes that the DELTRAN DPT which it designed over twenty years ago (original patents have expired), and currently manufactures, remains the standard in terms of accuracy, reliability and ease of use.  UTMD has an automated assembly line which allows the Company to effectively compete with larger suppliers on the basis of consistent quality and low manufacturing costs.  Introduced in 1998, the DELTRAN PLUS provides a closed system for blood sampling, without the use of needles, reducing the risk of an unwanted infection for both the patient and the practitioner.

Pressure Monitoring Accessories, Components and Other Molded Parts.
Components included in blood pressure monitoring kit configurations include flush devices, stopcocks, fluid administration sets, caps, pressure tubing, interface cables and organizers.  The Company sells similar components designed for other medical device company applications which incorporate UTMD's technologies and designs.  DELTA-CAL is a calibration device used to check proper functioning of an arterial pressure system.  In addition, UTMD sells plastic molded parts on a subcontract basis to a number of medical and non-medical device companies.  In addition, partly as a result of its excellent quality system and ISO13485 certification, UTMD performs subcontract assembly, testing and packaging of components that are proprietary to other medical device firms.  UTMD believes that this practice helps better utilize its investment in fixed plant and equipment, and spreads overhead costs resulting in better profit margins on finished device sales.

 
6

 

MARKETING

UTMD competes on the basis of its value-added technologies and cost effective clinical solutions.  UTMD believes that a number of its products are strong brands because they are recognized as clinically different, and consistently reliable in achieving their intended results.  The Company's primary marketing challenge is to keep its customers focused on those differences and their important clinical benefits.  Access to the clinical decision-makers, together with the active involvement of clinicians in medical device purchasing decisions, is critical to the Company's success.   

UTMD's specialty focus, innovation and extensive experience in its specialties are important marketing attributes which help ensure its ability to successfully compete and survive in a consolidating marketplace where competitors try to degrade UTMD's product differences.

For U.S. hospitals, which now represent about 56% of UTMD's device sales, marketing efforts are complicated and fragmented.  Although UTMD's focus is with clinicians who take responsibility for obtaining optimal patient care outcomes, other people who are primarily administrative are often responsible for hospital purchasing decisions.

DISTRIBUTION

An important success factor in the current healthcare industry is access to customers.  Although the U.S. hospital supplier environment has been consolidating as a result of group purchasing organizations (GPOs), or their equivalent, establishing long term contracts with large medical device suppliers with diverse product lines in recent years, the financial relationships and true benefits for hospitals has come under increased scrutiny, both by hospitals' managements themselves and by the government.  As a potential positive factor to UTMD's future performance, the increased scrutiny may lead to an understanding consistent with UTMD's belief that hospitals are not currently saving money under the GPO contracts.  In addition, the longer term overall cost of care will continue to increase, with quality of care lower, as innovative suppliers are excluded from participating in the marketplace.

The length of time and number of administrative steps required in evaluating new products for use in hospitals has grown substantially in recent years.  As a potential negative factor to future performance, as UTMD introduces new products it believes are safer and more effective, it may find itself excluded from certain customers because of the existence of long term supply agreements for existing products.  UTMD may also be unable to establish viable relationships with other medical device companies that do have access to users but lack an interest in the Company's approach or demand too great a financial or administrative burden.

In the United States, UTMD sells its products through its own directly employed sales force and through selective independent manufacturer representatives.  The direct representatives concentrate on applications for UTMD products where customer training and support are important.  As of February 2009, the direct sales force is comprised both of "outside" representatives operating remotely in specific geographic areas, and "inside" representatives who operate primarily by telephone from corporate offices.  Direct representatives are trained to understand the medical procedures being performed within UTMD's clinical focus.  Through the use of its one-on-one contacts with physicians and other clinical practitioners directly involved in patient care, the direct sales force positions UTMD to gain market leadership with solutions to clinical problems.  In addition to its direct representatives, UTMD utilizes third party consulting clinical specialists to augment its customer training programs.

When hospital customers request it, UTMD provides its products through national distribution companies, also known as Med/Surg distributors.  Sales to Med/Surg distributors currently comprise about 10% of total domestic sales.  In contrast, twelve years ago, national distributors and independent stocking distributors in the U.S. represented more than 65% of UTMD's direct domestic Ob/Gyn and Neonatal products business.

  In addition to the above traditional sales approaches, UTMD encourages customers to take advantage of fast and easy online ordering at https://storefront.utahmed.com. UTMD introduced this advanced "portal" website in 2006. It provides a convenient and secure method for placing orders, allows the customer to easily monitor the status of orders and shipments, and gives quick access to account information.

 
7

 

Additionally, UTMD sells component parts to other companies for use with their product lines.  This OEM distribution channel effort is simply maximizing utilization of manufacturing capabilities that are otherwise needed for UTMD's primary business, and does not compete with or dilute UTMD's direct distribution and marketing programs.

Internationally, the Company sells its products through over 300 regional distributors and OEMs (other medical device manufacturers).  The international business is driven by the initiative and resourcefulness of those independent distributors.  UTMD's Internet website www.utahmed.com is a frequent conduit for international customer inquiries.

NEW PRODUCT DEVELOPMENT

New product development has been a key ingredient to UTMD's market identity.  Product development takes three interrelated forms: 1) improvements, enhancements and extensions of current product lines in response to clinical needs or clinician requests, 2) introduction of new or augmented devices that represent a significant improvement in safety, effectiveness and/or cost of care, and 3) acquisitions of products or technology from others.  Manufacturing process development is an equally important aspect that cannot be separated from the successful  design and development of new products.

Because of UTMD's reputation as a focused product developer, its financial strength and its established clinician user base, it enjoys a substantial inflow of new product development ideas.  Internal development, joint development, product acquisitions and licensing arrangements are all included as viable options in the investigation of opportunities.  Only a small percentage of ideas survive feasibility screening.  For internal development purposes, projects are assigned to a project manager who assembles an interdisciplinary, cross-functional development team.  The team's objective is to have a clinically acceptable, manufacturable and FDA released product ready for marketing by a specific date.  Approximately ten projects on the average, depending on the level of resources required, are underway at UTMD at any given time.  More than 50% of assigned projects do not succeed in attaining a product that meets all of the Company's criteria.  In particular, this includes a product that is highly reliable, easy to use, cost-effective, safe, useful and differentiated from the competition. Once a product is developed, tooled, fully tested and cleared for marketing by the FDA, there remains a reasonable probability it cannot be successfully marketed for any number of reasons, not the least of which is being beaten to the market by a competitor with a better solution, or not having access to users because of limitations in marketing and distribution resources or exclusionary contracts of GPOs.

UTMD's current product development projects are in three areas of focus: 1) labor & delivery, 2) neonatal intensive care, and 3) specialized procedures for the assessment and treatment of cervical/uterine disease.  Internal product development expenses are expected to be in the range of 1-2% of sales in 2009.  In 2008, 2007 and 2006 respectively, new product development expenses were $359 (1.3% of sales), $382 (1.3% of sales) and $316 (1.1% of sales).

EMPLOYEES

At December 31, 2008, the Company had 186 employees, and an additional six contract employees.  The contract employees represent UTMD's desire to provide handicapped persons additional work opportunities, hired through the Utah state-supported Work Activity Center.  The average tenure of UTMD's employees is about eleven years, which conveys an important benefit due to the level of training required to produce consistently high quality medical devices.  The Company's continued success will depend to a large extent upon its ability to retain skilled employees.  No assurances can be given that the Company will be able to retain or attract such employees in the future, although management is committed to providing an attractive environment in which reliable, creative and high achieving people wish to work.

None of the Company's officers or directors is bound by restrictive covenants from prior employers that limit their ability to contribute to UTMD's programs.  All professional employees sign a code of conduct and a confidentiality and non-compete agreement as a condition of employment, and as consideration for receipt of stock option awards and participation in the annual sales and management bonus program.  All employees participate in contemporaneous performance-based bonus programs.  None of the Company's employees is represented by labor unions or other collective bargaining groups.

 
8

 

PATENTS, TRADEMARKS AND TECHNOLOGY LICENSES

The Company owns or exclusively licenses twenty-five unexpired patents, has three patents pending and is the licensee of certain other technology.  There can be no assurance, however, that patents will be issued with respect to any pending applications, that marketable products will result from the patents or that issued patents can be successfully defended in a patent infringement situation.  The Company also owns a number of trademarks which have achieved brand recognition.

The ability of the Company to achieve commercial success depends in part on the protection afforded by its patents and trademarks.  However, UTMD believes that the protections afforded by patents and trademarks are less important  to  UTMD's business, taken as a whole,  than a medical device's incremental clinical utility, which may be dominated by a number of other factors including relative cost, ease of use, ease of training/adoption, perceived clinical value of different design features, risk of use in applicable procedures, the reliability of achieving a desired outcome in the hands of different users and market access to potential users.  In cases where competitors introduce products that may infringe on UTMD's technology, the Company has an obligation to its shareholders to defend its intangible property to the extent that it can afford to do so, and that it is material to the Company's success.  The Company must also defend itself when competitors allege that UTMD may be infringing their technology.

As a matter of policy, UTMD has acquired and will continue to acquire the use of technology from third parties that can be synergistically combined with UTMD proprietary product ideas.  During 2008, ongoing royalties included in cost of goods sold were $2.  Other royalties have been previously paid as a lump sum, or are incorporated into the price of acquisitions, or into the cost of purchased components which practice certain patents of third parties.  Also as a matter of policy, UTMD licenses its proprietary technology to others in circumstances where licensing does not directly compete with UTMD's own marketing initiatives.  UTMD's future financial performance may also depend on the marketing ability of other companies that license UTMD's technology.  During 2008 the Company received $450 in royalty income, the same as in 2007 and 2006. The patents have now expired under which the $450 annual royalty income of the last three years was received.

GOVERNMENT REGULATION

UTMD's products and manufacturing processes are subject to regulation by the U.S. Food & Drug Administration ("FDA"), as well as other regulatory bodies globally.  The FDA has authority to regulate the marketing, manufacturing, labeling, packaging and distribution of medical devices in the U.S.  In addition, requirements exist under other federal laws and under state, local and foreign statutes that may apply to the manufacturing and marketing of the Company's products.

All manufacturers of medical devices must register with the FDA and list all medical devices produced by them.   In addition, prior to commercial distribution of some devices for human use, a manufacturer must file a notice with the FDA, setting forth certain information regarding the safety and effectiveness of the device that is acceptable in content to the FDA.

Devices which are classified in Class I are subject only to the general controls concerning adulteration, misbranding, good manufacturing practices, record keeping and reporting requirements.  Devices classified in Class II must, in addition, comply with special controls or performance standards promulgated by the FDA.

All of UTMD's present products are unclassified, Class I or Class II devices.  The Company is in compliance with all applicable U.S. regulatory standards including CFR Part 820, the FDA Quality System Regulation (QSR) effective in 1997, also known as cGMPs (current good manufacturing practices).

 
9

 

In 1994, UTMD received certification of its quality system under the ISO9001/EN46001 standards ("ISO" stands for "International Organization of Standardization") which it maintained until December 2003.  In October 2003, UTMD's Utah facility was certified under the more stringent ISO13485 standard for medical devices. UTMD's Ireland facility was certified under the concomitant ISO13488 standard.  In July 2006, both facility ISO certifications were upgraded to the even more stringent ISO13485:2003 standards, which continue to be maintained.  UTMD remains on a continuous periodic audit schedule by its independent notified body in order to stay current with international regulatory standards, and retain its certification. The most recent audit was conducted in December 2008. UTMD has received formal product certifications allowing the use of the CE Mark (demonstrates proof of compliance with the European Community's ISO standards) for essentially all of its products.  The U.S. FDA QSR was developed in harmony with the ISO standards.
 
SOURCES AND AVAILABILITY OF RAW MATERIALS

Most of the components which the Company purchases from various vendors are readily available from a number of sources.  Alternative sourcing of various components is continually underway.  Vendors are qualified by Corporate Quality Assurance. The Company has a vendor quality monitoring program that includes routinely checking incoming material for conformance to specifications, as required per written procedures.

EXPORTS

UTMD continues to regard the international marketplace as an important element of its growth strategy.   UTMD is keenly aware that not only are international markets different from the U.S. market, but also that each country has its own set of driving influences that affects the dynamics of the nature of care given and medical devices used.  In 1996 UTMD completed construction of a manufacturing facility in Athlone, County Westmeath, Ireland.  The facility offers a number of advantages: 1) from a marketing point of view, better response to European Union customers, including a better understanding of customized needs, less costly distribution and duty-free access to 500 million patients; 2) from a regulatory point of view, faster new product introductions; and 3) from a manufacturing point of view, reduced dependence on one manufacturing site and increased capacity for existing U.S. facilities.

Revenues from customers outside the U.S. in 2008 were $8,668 (31% of total sales), compared to $8,576 (30% of total sales) in 2007 and $7,390 (26% of total sales) in 2006.  After growing annually by 16% in each of the two prior years of 2007 and 2006, international sales in 2008 were up only 1%.  This was due primarily to a stronger U.S. Dollar, as well as a general slowing of economic activity, in the 2H08.  UTMD expects the slowing of international distributor orders that was experienced in 2H08 will continue into 2009.  In early 2009, UTMD learned that its largest international customer located in Germany and third largest international customer located in South Africa, combined representing $2,327 (27%) of 2008 international sales, would not be purchasing UTMD products at least for the first quarter of 2009.

Blood pressure monitoring products represented 58% of international sales in 2008, 2007 and in 2006.  International Ob/Gyn and neonatal product sales were $3,612 in 2008, compared to $3,586 in 2007 and $3,109 in 2006.  For financial information by geographic area, please see notes 1, 5 and 10 to the Consolidated Financial Statements.

BACKLOG

"Backlog" is defined as orders received and accepted by UTMD which have not shipped yet.  As a supplier of primarily disposable hospital products, the nature of UTMD's business requires fast response to customer orders.  Virtually all direct shipments to end users are accomplished within a few days of receipt of customer purchase orders.  Consequently, UTMD's backlog at any point in time is comprised mainly of orders from OEM and international customers, which purchase in larger quantities at less frequent intervals.  Backlog shippable in less than 90 days was  $685 as of January 1, 2009, $823 as of January 1, 2008 and $906 as of January 1, 2007.  The lower backlog at the beginning of 2009 reflects the international slowdown described above.

 
10

 

SEASONAL ASPECTS

The Company's business is generally not affected by seasonal factors.

PRODUCT LIABILITY RISK MANAGEMENT

The risk of product liability lawsuits is a negative factor in the medical device business because devices are frequently used in inherently risky situations to help physicians achieve a more positive outcome than what might otherwise be the case.  In any lawsuit against a company where an individual plaintiff suffers a physical injury, a possibility of a large award for damages exists whether or not a causal relationship exists.  However, no such damages have been awarded against UTMD in its 30 year history.

UTMD is self-insured for product liability risk and reserves funds against its current performance on an ongoing basis to provide for its defense should any lawsuits be filed.  The best defense the Company believes that it has is the consistent conformance to specifications of its proven safe and effective products.  Over the time span of the last sixteen years, UTMD has been named as a defendant, along with each attending physician and hospital, in four lawsuits which involved a patient injury.  All four were related to operative vaginal deliveries where a UTMD VAD birthing cup or hand pump was used by the surgeon.  The VADS products in all four cases did conform to specifications.  UTMD was ultimately dismissed as a defendant in the lawsuits, and legal costs were not material to performance.  During the same sixteen year period of time, in which more than 18 million UTMD finished devices were used, no other UTMD product was the subject of a patient injury which resulted in a lawsuit.


FORWARD LOOKING INFORMATION

This report contains certain forward-looking statements and information relating to the Company that are based on the beliefs of management as well as assumptions made by management based on information currently available.  When used in this document, the words "anticipate," "believe," "project," "estimate," "expect," "intend" and similar expressions, as they relate to the Company or its management, are intended to identify forward-looking statements.  Such statements reflect the current view of the Company respecting future events and are subject to certain risks, uncertainties and assumptions, including the risks and uncertainties stated throughout the document.  Although the Company has attempted to identify important factors that could cause the actual results to differ materially, there may be other factors that cause the forward statement not to come true as anticipated, believed, projected, expected, or intended.  Should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may differ materially from those described herein as anticipated, believed, projected, estimated, expected or intended.  Financial estimates are subject to change and are not intended to be relied upon as predictions of future operating results, and the Company assumes no obligation to update or disclose revisions to those estimates.


ITEM 1A - RISK FACTORS

General risk factors that may impact the Company's revenues include: the market acceptance of competitive products; administrative practices of group purchasing organizations; obsolescence caused by new technologies; the possible introduction by competitors of new products that claim to have many of the advantages of UTMD's products at lower prices; the timing and market acceptance of UTMD's own new product introductions; UTMD's ability to efficiently and responsively manufacture its products, including the possible effects of lack of performance of suppliers; opportunities in gaining access to important global distribution channels; budgetary constraints; the timing of regulatory approvals for newly developed products; regulatory intervention in current operations; and third party reimbursement of health care costs of patients.

Negative factors that may adversely impact future performance include managed care reforms or hospital group buying agreements that may limit physicians' ability to choose certain products or procedures, new products introduced by other companies that displace UTMD's products, new product regulatory approval delays, changes in the Company's relationships with, or lack of performance of, its distribution partners, and loss of key personnel.

 
11

 

The length of time and number of administrative steps required in adopting new products for use in hospitals has grown substantially in recent years.  As a potential negative factor to future performance, as UTMD introduces new products it believes are safer and more effective, it may find itself excluded from certain customers because of the existence of long term supply agreements for preexisting products.  UTMD may also be unable to establish viable relationships with other medical device companies that do have access to users but lack an interest in the Company's approach or present unreasonable burdens.

Risk factors, in addition to the risks outlined in the previous paragraphs and elsewhere in this report that may impact the Company's assets and liabilities, as well as cash flows, include: risks inherent to companies manufacturing products used in healthcare, including claims resulting from the improper use of devices and other product liability claims; defense of the Company's intellectual property and infringement claims of others; productive use of assets in generating revenues; management of working capital, including inventory levels required to meet delivery commitments at a minimum cost; and timely collection of accounts receivable.

Additional risk factors that may affect non-operating income include: the continuing viability of the Company's technology license agreements; actual cash and investment balances; asset dispositions; and acquisition activities that may or may not require external funding.


ITEM 1B - UNRESOLVED STAFF COMMENTS

None


ITEM 2 - PROPERTIES

Office and Manufacturing Facilities.
The Company's current operations are located in a 100,000 square foot facility in Midvale, Utah, a suburb of Salt Lake City, a 20,000 square foot facility in Redmond, Oregon, and a 77,000 square foot facility in Athlone, County Westmeath, Ireland.  UTMD owns its property and facilities in Utah and Ireland, with the exception of a long-term lease on one section of its Midvale parking lot.  The Oregon facility is leased.

UTMD is a vertically-integrated manufacturing company.  Capabilities include silicone and plastics-forming operations including injection molding, insert and over-molding, thermoforming and extrusion; sensor production; manual and automated assembly of mechanical, electrical and electronic components; parts printing; various testing modalities; advanced packaging in clean room conditions; and a machine shop for mold-making and fabrication of assembly tools and fixtures.  Capabilities also include an R&D laboratory for both electronic and chemical processes, software development resources, communications and computer systems networked real time internationally, and administrative offices.


ITEM 3 - LEGAL PROCEEDINGS

The Company may be a party from time to time in litigation incidental to its business.  Presently, there is no litigation for which the Company believes the outcome may be material to its financial results.


ITEM 4 - SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matter was submitted to a vote of security holders through the solicitation of proxies or otherwise during the fourth quarter of the fiscal year covered by this report.

 
12

 

PART II

ITEM 5 - MARKET FOR REGISTRANT'S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market Information.
UTMD's common stock trades on the NASDAQ Global Market (symbol:UTMD).  The following table sets forth the high and low sales price information as reported by NASDAQ for the periods indicated:

   
2008
   
2007
 
   
High
   
Low
   
High
   
Low
 
1st Quarter
  $ 32.35     $ 27.13     $ 34.88     $ 31.24  
2nd Quarter
    30.05       26.80       34.59       29.30  
3rd Quarter
    30.01       24.96       32.84       29.50  
4th Quarter
    29.77       20.04       31.99       29.27  

Stockholders.
The approximate number of beneficial stockholders of UTMD's common stock as of March 6, 2009 was 2,300.

Dividends.
The following sets forth cash dividends declared or paid during the past two years:

Record Date
 
Payable Date
 
Per Share Amount
December 14, 2006
 
January 4, 2007
 
0.21  
March 15, 2007
 
April 4, 2007
 
0.22  
June 15, 2007
 
July 5, 2007
 
0.22  
September 14, 2007
 
October 3, 2007
 
0.22  
December 14, 2007
 
January 3, 2008
 
0.225
March 14, 2008
 
April 3, 2008
 
0.225
June 16. 2008
 
July 3, 2008
 
0.225
September 15, 2008
 
October 3, 2008
 
0.225
December 16, 2008
 
December 30, 2008
 
0.23  
         
2007 total paid
 
$0.87   
         
2008 total paid
 
$1.13   

Issuer Purchases of Equity Securities.
The following table details purchases by UTMD of its own securities during fourth quarter 2008.

Period
Total Number of Shares purchased (1)
 
Average Price Paid per Share
 
Total Number of Shares Purchased as Part of Publicly Announced Plans or Programs (1)
 
Maximum Number (or Approximate Dollar Value) of Shares that May Yet be Purchased Under the Plans or Programs (1)
10/01/08 - 10/31/08
      27,171
 
$  26.38
 
            27,171
 
see (1) below
11/01/08 - 11/30/08
    118,623
 
    23.79
 
          118,623
   
12/01/08 - 12/31/08
    108,305
 
    21.65
 
          108,305
   
Total
    254,099
 
$  23.15
 
          254,099
   
 
(1)  In fourth quarter 2008 UTMD repurchased an aggregate of 254,100 shares of its common stock at an average cost of $23.15 per share pursuant to a continued open market repurchase program instituted in August 1992.  Since 1993 through 2008, the Company has repurchased 6,714,100 shares at an average cost of $12.44 per share including broker commissions and fees in open market transactions.  In addition, the Company conducted tender offer transactions in which it purchased an additional 2,775,700 shares at an average cost of $9.76 per share including fees and administrative costs.  In total, UTMD has repurchased 9.5 million of its shares at an average price of $11.66 per share since 1993.  To complete the picture relating to current shares outstanding, since 1993 the Company's employees and directors have exercised and purchased 1.6 million option shares at an average price of $9.02 per share.  All options were awarded at the market value of the stock on the date of the award.

 
13

 

The frequency of UTMD's continuing open market share repurchases will depend on the availability of sellers and the price of the stock.  The board of directors has not established an expiration date or a maximum dollar or share limit for UTMD's continuing long term program of open market share repurchases.

The purpose of UTMD's share repurchases is to maximize the value of the Company for its continuing shareholders, and maximize its return on shareholder equity by employing excess cash generated from effectively managing its business.  UTMD does not intend to repurchase shares that would result in terminating its NASDAQ Global Market listing.


ITEM 6 - SELECTED FINANCIAL DATA
Dollar amounts are in thousands, except per share data.

The following selected consolidated financial data of UTMD and its subsidiaries for the five years ended December 31, 2008, are derived from the audited financial statements and notes of UTMD and its subsidiaries, certain of which are included in this report.  The selected consolidated financial data should be read in conjunction with UTMD's Consolidated Financial Statements and the notes included elsewhere in this report.

   
Year Ended December 31
 
   
2008
   
2007
   
2006
   
2005
   
2004
 
Net Sales
  $ 27,782     $ 28,502     $ 28,753     $ 27,692     $ 26,485  
Net Income
    7,205       7,905       8,168       7,547       10,220  
Earnings Per Common Share (Diluted)
    1.86       1.98       2.02       1.80       2.19  
Total Assets
    38,821       45,986       44,187       41,642       41,262  
Working Capital
    21,511       26,767       25,030       22,230       20,194  
Long-term Debt
    1,828       3,689       4,383       4,883       -  
Cash Dividends Per Common Share
    1.13       0.87       0.74       0.61       0.30  
 
 
   
Quarterly Data for 2008
   
First Quarter
   
Second Quarter
   
Third Quarter
   
Fourth Quarter
 
Net Sales
  $ 6,890     $ 7,115     $ 7,181     $ 6,596  
Gross Profit
    3,750       3,921       3,937       3,410  
Net Income
    1,891       1,917       1,820       1,577  
Earnings Per Common Share (Diluted)
    .48       .49       .47       .42  
                                 
   
Quarterly Data for 2007
   
First Quarter
   
Second Quarter
   
Third Quarter
   
Fourth Quarter
 
Net Sales
  $ 7,118     $ 7,211     $ 7,097     $ 7,076  
Gross Profit
    3,937       4,005       3,973       3,873  
Net Income
    1,944       1,985       2,021       1,955  
Earnings Per Common Share (Diluted)
    .48       .50       .51       .49  
 
 
14

 

ITEM 7 - MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS
Dollar amounts are in thousands except per-share amounts and where noted.

The following comments should be read in conjunction with the accompanying financial statements.

Productivity of Assets and Working Capital.
a)  Assets.  Year-end 2008 total assets were $38,821 compared to $45,986 in 2007. The decrease was due primarily to a $6,347 decrease in cash and investments.  In 2008, UTMD used its cash to repurchase 320,900 of its shares for $7,792 and pay $4,329 in dividends to shareholders  As a result, the 2008 productivity of total assets (= average total asset turns; total sales divided by average total assets for the year) was about 4% higher than in 2007.  In both years productivity was diluted by UTMD's substantial cash-equivalent balances. Year-end 2008 and 2007 cash and investment balances were $16,025 and $22,372, representing 42% and 49% of total assets, respectively.  UTMD also used its cash generated in Ireland in 2008 to reduce the principle on the Ireland loan by $2,020. Excluding average cash and investment balances, average total asset turns were 1.2 in both 2008 and 2007.  In 2009, total assets excluding cash and investment balances will continue to be substantially less than annual sales, which benefits return on average shareholders equity (ROE).  Other asset changes which aided the decline in total assets included a $479 decrease in the net book value of property and equipment due to depreciation, and a $388 decrease in receivables due to lower sales and better A/R collections performance.

Property, plant and equipment (PP&E) assets are comprised of Utah, Oregon and Ireland manufacturing molds, production tooling and equipment, test equipment, computer/communications equipment and software, and the Utah and Ireland facilities.  UTMD leases the Oregon facility as a result of the 1997 CMI acquisition, and a portion of its Midvale, Utah parking lot.  In 2008, net consolidated PP&E (depreciated book value of all fixed assets) decreased $479 as a result of $544 in depreciation, capital expenditures of $274 and the effect of currency exchange rates on equipment in Ireland.  The net book value of PP&E in the U.S. decreased $168, and in Ireland decreased $311.  The year-end 2008 net book value (after accumulated depreciation) of consolidated PP&E was 32% of actual acquisition cost.  Since UTMD's PP&E is in good working order and capable of supporting increased sales activity, the continued productivity of fixed assets will remain a source of future profitability.  In 2009, depreciation of fixed assets should again equal or exceed new PP&E purchases required to sustain current operations.

Average 2008 inventory turns were 4.0 despite lower sales, and continued to meet management's objective.  Net (after allowance for doubtful accounts) year-end trade accounts receivable (A/R) balances decreased $360 or about 10% while 2008 sales activity decreased 3%.  The resulting average days in A/R on December 31, 2008 of 46 days, based on 4Q 2008 shipments, improved from 47 days at the end of 2007. This performance remained well within management's continuing objective of 55 days.  A/R over 90 days from invoice date at year-end 2008 were 3% of total A/R, down significantly from 10% at the end of 2007.  The Company believes the older A/R will be collected or are within its reserve balances for uncollectible accounts.

Working capital at year-end 2008 was $21,511 compared to $26,767 at year-end 2007.  Both of those amounts exceed UTMD's working capital needs for internally financing growth in normal operations. UTMD's current ratio (current assets divided current liabilities) increased to 13.2 from 9.5 due to a $1,397 (44%) decline in the denominator.  Accrued liabilities, a subset of current liabilities (C/L), declined $1,263 because of lower accrued management bonuses and the fact that in 2008 the 4Q08 shareholder dividend was paid at the end of December instead of early January, as in prior years.  The current portion of the Ireland note, which is also included in C/L, declined by $158.  UTMD expects to be able to maintain a very healthy current ratio in 2009.

Net (after accumulated amortization) intangible assets, which are comprised of goodwill resulting from acquisitions and the costs of obtaining patents and other intellectual property including technology rights, were $7,414 at the end of 2008 compared to $7,449 at the end of 2007. UTMD's goodwill balance is $7,191. Under current GAAP, goodwill is not expensed unless and until the market value of the acquired entity becomes impaired. The three acquisitions of 1997, 1998 and 2004 continue to be viable parts of UTMD's overall business, representing 35% of total sales in 2008. UTMD does not expect the current intangible value of goodwill associated with the acquisitions to become impaired in 2009.  Purchases of other intangibles of $13 in 2008 were offset by $47 in amortization expense. Net intangible assets at the end of 2008 represented 19% of total assets compared to 16% at the end of 2007.

 
15

 

b) Liabilities.  In 2008, UTMD's total liabilities decreased $3,181 from the end of 2007.  The resulting 2008-ending total debt ratio was 10% of total assets, down from a total debt ratio of 16% at the end of 2007. Current liabilities declined primarily because of the decrease in accrued expenses and the current portion of the Ireland loan, as noted above.  The Ireland note payable as a whole, denominated in Euros, declined $2,019 in USD book value compared to actual principal payments of $1,917.  The difference results from currency exchange in the value of the USD compared to the Euro. In thousand Euro, the note declined 47% from 2,791 at the beginning of 2008 to 1,485 at the end of 2008.  As a reminder to shareholders, the note was initiated in December 2005 to finance repatriation of profits achieved in Ireland since 1996 through 2005 under The American Jobs Creation Act of 2004.  UTMD Ltd. plans to repay this note from profits generated in Ireland over the next two to three years.  In addition to liabilities on the balance sheet, UTMD has operating lease and purchase obligations described in note 7.
 
Results of Operations.
a) Revenues.  Global consolidated sales in 2008 were $27,782, compared to $28,502 in 2007 and $28,753 in 2006.

Domestic sales were $19,113 in 2008, compared to $19,926 in 2007 and $21,363 in 2006. UTMD divides its domestic sales into two distribution channels: "direct sales" which are sales to end user customers by UTMD's direct sales force, independent commissioned sales reps, specialty distributors and national hospital distribution companies, and "OEM sales" which are component sales to other companies where products are packaged and resold as part of another company's finished product offerings.  As a percentage of total domestic sales, direct domestic sales were 92% in 2008, and 94% in both 2007 and 2006.  Therefore, domestic OEM sales were 8% of total domestic sales in 2008, and 6% of sales in both 2007 and 2006.  Domestic direct sales represented 63% of global consolidated sales in 2008, compared to 66% in 2007 and 70% in 2006.

International (foreign) sales in 2008 were $8,668 compared to $8,576 in 2007 and $7,390 in 2006.  International sales grew to 31% of global consolidated sales in 2008, compared to 30% in 2007 and 26% in 2006.  Of the 2008 international sales, 55% were to customers in Europe compared to 55% in 2007 and 53% in 2006.  Ireland operations (UTMD Ltd.) shipped 46% of international sales (in USD terms) in 2008, compared to 51% in 2007 and 52% in 2006.  UTMD Ltd. trade shipments were down 17% in Euro terms, and down 10% in USD terms, in 2008 compared to 2007.

UTMD groups its sales into four general product categories:  1) obstetrics, comprised of labor and delivery management tools for monitoring fetal and maternal well-being, for reducing risk in performing difficult delivery procedures and for improving clinician and patient safety;  2) gynecology/ electrosurgery/ urology, comprised of tools for gynecological procedures associated primarily with cervical/ uterine disease including LETZ, endometrial sampling, transvaginal uterine sonography, diagnostic laparoscopy, and other MIS procedures; specialty excision and incision tools; conservative urinary incontinence therapy devices; and urology tools;  3) neonatal critical care, comprised of devices that provide developmentally-friendly care to the most critically ill babies, including providing vascular access, enteral feeding, administering vital fluids, maintaining a neutral thermal environment, providing protection and assisting in specialized applications; and 4) blood pressure monitoring/ accessories/ other, comprised of specialized components as well as molded parts sold on an OEM basis to other companies.  In these four categories, UTMD's primary revenue contributors enjoy a significant market share and may have differentiated product features protected by patents.

Global revenues by product category:
   
2008
   
%
   
2007
   
%
   
2006
   
%
 
Obstetrics
  $ 7,054      
  25
    $ 8,473      
  30
    $ 9,371      
  33
 
Gynecology/ Electrosurgery/ Urology
    6,157      
  22
      6,143      
  21
 
    6,106      
  21
 
Neonatal
    7,334      
  27
 
    7,062      
  25
      7,073      
  25
 
Blood Pressure Monitoring and Accessories*
    7,236      
  26
      6,824      
  24
      6,203      
  21
 
Total:
  $ 27,782      
100
    $ 28,502      
100
    $ 28,753      
100
 
*includes molded components sold to OEM customers.

 
16

 

International revenues by product category:
   
2008
   
%
   
2007
   
%
   
2006
   
%
 
Obstetrics
  $ 572      
  7
    $ 881      
  10
    $ 764      
  10
 
Gynecology/ Electrosurgery/ Urology
    2,193      
  25
      1,944      
  23
      1,820      
  25
 
Neonatal
    847      
  10
      761      
    9
      525      
    7
 
Blood Pressure Monitoring and Accessories*
    5,056      
  58
      4,990      
  58
      4,281      
  58
 
Total:
  $ 8,668      
100
    $ 8,576      
100
    $ 7,390      
100
 
*includes molded components sold to OEM customers.

As a summary explanation of revenues in the above tables,

1.  Obstetrics.  The $1,419 decline in total obstetrics (L&D) device sales in 2008 was primarily the result of the restrictive effects of U.S. GPO administrative agreements.  For example, GPO restrictions included a sole source contract consummated by HealthTrust Purchasing Group (HPG) with a UTMD competitor for IUPCs and VADS which took effect on September 1, 2007.  These specialty catheters and surgical tools are clearly in the category of "clinician preference products."  The HPG sole source agreement violates the mandate by the U.S. Senate Judiciary Antitrust Subcommittee in April 2002 that GPOs only allow multi-source contracting for clinician-preference products, as well as the ensuing "Healthcare Group Purchasing Industry Initiative" code of ethics, of which HPG was a founding member. It also represented a violation of HPG's own code of ethics, which states in Section HPG.008, "No GPO should come between hospital administration and their physicians when it comes to the choice of medical devices needed to treat the patient.  To this end, HealthTrust offers a complete line of contracts in these areas [clinician-preference products] that provides substantial choice to our members and their physicians."  In the U.S., 2008 sales of Intran Plus intrauterine pressure catheters (IUPCs) declined $1,016 and sales of CMI vacuum-assisted delivery systems (VADS) declined $112. About 10% of the IUPC decline resulted from lower prices.  The silver lining of this decline is that the Company's reliance on a single product is much less concentrated; i.e., in 2008, U.S. IUPC sales were 17% of total sales compared to 2004 when U.S. IUPC sales were 31% of total sales.  The $1,129 decline in U.S. IUPC and VADS sales but only $720 decline in total sales indicates that UTMD's sales of its other devices and its international business are expanding.

2.  International gynecology/ electrosurgery/ urology (ES/gyn) product sales increased $248 (13%), while U.S. ES/gyn sales declined $235 (6%).  As a result of the 2007 American Society for Colposcopy and Cervical Pathology (ASCCP) revised guidelines for the treatment of CIN, which advised greater monitoring of lower grade lesions in lieu of surgical treatment, UTMD observed approximately a 10% decline in use of LETZ electrodes from a consistent gynecology customer base.  The effect of the new guidelines now seems to have stabilized.

3.  Neonatal critical care device (NICU) sales increased $186 (3%) in the U.S. and $86 (11%) internationally.  In the U.S., because products in this category are sold to hospitals, sales are affected by GPO restrictions.  However, because NICU devices are more diverse and lower volume than in L&D, and because of the special nature of the patients, UTMD believes that clinicians remain more heavily involved in product selection.  Therefore, U.S. GPO administrative deals are less of a challenge in supplying specialty NICU devices than for L&D.   UTMD expects that NICU devices will lead its sales growth in 2009.

4.  Blood pressure monitoring and accessories (BPM).   U.S. BPM sales increased $347 (19%), while international BPM sales increased $66 (1%). Virtually all of UTMD's domestic OEM sales were included in the BPM category in 2008.  Domestic OEM sales increased $274 (22%) compared to 2007.  The category includes molded components (some of which are not related to medical devices) sold to other companies for use in their products.  In contrast to the other product categories, international sales of BPM devices comprise most (70% in 2008 and 73% in 2007) of UTMD's BPM sales.  UTMD's BPM sales depend heavily on successful marketing by international distributors and OEMs.  Due to a stronger US Dollar and a general economic downturn, UTMD experienced substantial slowing of international distributor orders for BPM products in 2H08, and expects that it will continue into 2009.  In early 2009, UTMD learned that its largest international customer located in Germany and third largest international customer located in South Africa, combined representing $2,327 (27%) of 2008 international sales, would not be purchasing UTMD products at least for the first quarter of 2009.

 
17

 

Looking forward to 2009, UTMD's improvement in domestic direct sales depends on its ability to obtain medical staff involvement in purchasing decisions for UTMD's "physician-preference" products used in U.S. hospitals where administrators are making the product decisions through the use of GPOs contracts awarded on bases which may not adequately take into consideration the total cost of patient care, which includes complication rates and longer term health outcomes.  An important factor in UTMD's ability to compete in this administratively cumbersome environment is its continuing ability to develop devices that are clearly differentiated on the basis of patient safety and better health outcomes.  Despite the apparent weakness in international sales entering the year, and excluding the possibility of acquisition of a new product line with established sales, management projects overall revenues in 2009 about the same as in 2008.  This assumes continued increases in domestic NICU and ES/Gyn sales of about 5% and resumption of international customer purchases in 2Q 09.

b)  Gross Profit.  UTMD's 2008 gross profit, the surplus after subtracting costs of manufacturing, inspecting, packaging, sterilizing and shipping products (CGS) from net revenues, was $15,018 compared to $15,788 in 2007 and $16,147 in 2006.  Gross profit margins (GPMs), gross profits expressed as a percentage of net sales, were 54.1% in 2008 compared to 55.4% in 2007 and 56.2% in 2006. The GPM in 2008 was lower for several reasons:
1) Because many of UTMD's manufacturing overhead expenses are fixed in order to preserve capabilities, the lower consolidated sales activity in 2008 had a higher overhead content.  UTMD retains facilities and other manufacturing infrastructure well in excess of its current needs, which will help GPM when sales expand.
2) Because of competition and a number of long term fixed pricing agreements, UTMD had a limited ability to increase product prices in 2008, at the same time direct labor and direct materials costs were increasing fairly substantially.
3)  In 2008, UTMD reduced domestic prices of its IUPCs by 3%. This represented 11% of the obstetrics sales decline and 20% of the decline in total gross profits.  Management doesn't expect any significant price decreases in 2009.
4)  UTMD conducted an IUPC recall in 2008 due to potentially defective packaging, for which it estimates a marginal cost, after applying its warranty reserve, of about a half percentage point in total GPM.  The recall was completed successfully without any indication of a risk of patient injury, and with no interruption to the supply of IUPCs needed by hospital customers.
5)   The distribution mix helped lower the average GPM since domestic OEM and international sales increased while domestic direct sales decreased.  GPMs on domestic direct sales must be higher in order to support sales and marketing expenses that are not associated with domestic OEM and international sales.

UTMD expects 2009 GPM to again be under pressure as a result of higher direct labor, direct materials and overhead costs with about the same projected sales.

UTMD utilizes OEM sales as a means to help maximize utilization of its capabilities established to satisfy its direct sales business.  As a general rule, prices for OEM sales expressed as a multiple of direct variable manufacturing expenses are lower than for direct sales because, in the OEM and international channels, UTMD's business partners incur significant expenses of sales and marketing.  Because of UTMD's small size and period-to-period fluctuations in OEM business activity, allocations of fixed manufacturing overhead expenses cannot be meaningfully allocated between direct and OEM sales. Therefore, UTMD does not report GPM by sales channels.

c) Operating Income.  Operating income is the surplus after operating expenses are subtracted from gross profits.  Operating expenses include sales and marketing (S&M) expenses, product development (R&D) expenses and general and administrative (G&A) expenses.  Combined operating expenses were $4,629 in 2008, compared to $5,032 in 2007 and $5,312 in 2006.  The lower operating expenses were primarily due to $268 lower accrued management bonuses and $74 lower GPO fees.

 
18

 

   
2008
   
2007
   
2006
 
R&D expenses
  $ 359     $ 382     $ 316  
S&M expenses
    1,816       2,075       2,272  
G&A - a) litigation expense provision
    80       127       230  
G&A - b) corporate legal expenses
    48       15       21  
G&A - c) stock option compensation expense
    120       95       140  
G&A - d) management bonus accrual
    148       378       380  
G&A - e) outside accounting audit/tax expenses
    167       134       100  
G&A - f) all other expenses
    1,891       1,826       1,854  
G&A expenses - total
    2,454       2,575       2,725  
Total operating expenses
  $ 4,629     $ 5,032     $ 5,312  

Operating income in 2008 was $10,389 compared to $10,756 in 2007, and $10,835 in 2006.  UTMD's operating profit margin (operating income divided by total sales) was 37.4% in 2008, compared to 37.7% in both 2007 and 2006.  Looking forward to 2009, UTMD expects an operating margin of about 36%, as it plans to increase expenses in all three areas of S&M, R&D and G&A with about the same volume of sales as in 2008.

i)  S&M expenses:  S&M expenses are the costs of communicating UTMD's differences and product advantages, providing training and other customer service in support of the use of UTMD's solutions, attending clinical meetings and medical trade shows, processing orders and funding GPO fees. Because UTMD sells internationally through third party distributors, its S&M expenses are predominantly for U.S. business activity where it sells directly to clinical users.  The largest component of S&M expenses is the cost of directly employing representatives that solicit product sales and provide customer support across the U.S.  The decline in S&M expenses primarily reflects fewer direct sales representatives.  As a percent of total sales, S&M operating expenses were 6.5% in 2008, 7.3% in 2007 and 7.9% in 2006.  In 2009, UTMD intends to increase S&M expenses, but hold the ratio to total sales to about 7%.

ii)  R&D expenses:  R&D expenses include the costs of investigating clinical needs, developing innovative concepts, testing concepts for viability, validating methods of manufacture, completing premarketing regulatory documentation and other activities required for design control, responding to customer requests for product enhancements, and assisting manufacturing engineering on an ongoing basis in developing new processes or improving existing processes.  As a percent of sales, R&D expenses were 1.3% in 2008 compared to 1.3% in 2007 and 1.1% in 2006.  UTMD will continue to opportunistically invest in R&D in order to reinvigorate its product development pipeline.  In 2009, R&D expenses should remain in the range of 1-2% of sales.

iii)  G&A expenses:  G&A expenses include the functional costs of executive management, finance and accounting, corporate information systems, human resources, shareholder relations, risk management, protection of intellectual property, and legal costs.  Aggregate G&A expenses as a percent of sales were 8.8% in 2008, 9.0% in 2007 and 9.5% in 2006. Except for the categories of G&A expenses isolated in the table above, UTMD's G&A expenses have remained fairly consistent over the last three years. The following lettered items refer to the same G&A subcategories in the table above:

 
a)
If no currently unforeseen litigation arises, UTMD expects litigation expenses in 2009 to continue to decline.
 
b)
The increase in 2008 corporate legal expenses was essentially due to the legal costs associated with the filing of SEC Form S-3, Registration Statement Under the Securities Act of 1933, in 3Q 2008.  In 2009, UTMD expects a return to expenses more consistent with those in 2007 and 2006.
 
c)
Stock option expense in 2008 was calculated using a Black-Scholes pricing model for unvested options.   Please see Note 9 to "Notes to Consolidated Financial Statements" for further explanation.  In 2009, UTMD expects option expense about the same as in 2007.
 
d)
The difference in 2008 management bonus compared to the two earlier years was due to the fact that UTMD's CEO did not receive a 2008 management bonus.  Accrued bonuses in 2009 will continue to depend both on UTMD's overall performance and each individual's performance.
 
e)
UTMD's personnel, fundamental business activities, internal control systems and financial reporting mechanisms have remained relatively unchanged over the last several years.  Nevertheless, due to the "Accountants' Full Employment Act of 2002", also known as "The Sarbanes-Oxley Act of 2002", outside auditor and tax consultant costs have grown rapidly.  Still, UTMD's costs remain below these expenses incurred by most companies.  Management expects 2009 accounting/financial controls audit costs will remain about the same as in 2008.

 
19

 

  d)   Non-operating Income, Non-operating Expense and EBT.  Non-operating income (NOI) includes royalties from licensing UTMD's technology, rent from leasing underutilized property to others, income earned from investing the Company's excess cash and gains or losses from the sale of assets, offset by non-operating expenses which include interest on the Ireland bank loan, bank service fees and excise taxes.  NOI was $388 in 2008, compared to $1,283 in 2007 and $1,582 in 2006.

1) Investment of excess cash.  Investment income (including gains and losses on sales) in 2008 was $115, compared to $1,022 in 2007 and $1,383 in 2006.  In 2008, average interest rates were substantially lower and the Company realized an investment loss of $718 due just to the failure of Washington Mutual (WM) savings and loan.  UTMD recognized capital gains and corporate dividends of $306 on other common stock investments which helped offset the loss. The WM holding represented about 3.5% of UTMD's investment portfolio at cost.  Capital gains (or losses) and dividends from investments in common stocks were ($407) in 2008, $20 in 2007 and $593 in 2006.  The capital gains in the two earlier years allowed the loss in 2008 to be fully tax-deductible. The Company also holds investments in CitiCorp (C) and General Electric (GE) common stock which together were about $405 below their aggregate purchase price at the end of 2008.  When purchased, these holdings at cost represented less than 3% of UTMD's total investment portfolio. Unless one or both of the companies fail, as was the case with WM, UTMD will not sell the holdings at current prices, expecting that they will recover in value, and therefore will not have an associated NOI loss which impacts earnings. Currently, 99% of UTMD's cash investments are being held in interest bearing money market securities yielding only about 1.0%.
   
 
2) Royalties.  Annual royalties received in all three years were $450, which came from the license of patents which expired during 2008.  Presently, there are no other patents under which UTMD is receiving royalties from other parties.
   
 
3) Interest Expense.  In 2008, UTMD paid $198 in interest expense on the Ireland loan, compared to $270 in 2007 and $255 in 2006.  The interest expense results from borrowing 4.5 million ($5,336) in December 2005 to allow the repatriation of profits generated by UTMD's Ireland subsidiary since 1996 through 2005.  Due to a lower loan balance as well as lower expected interest rates, UTMD estimates that its interest expense will be less than $80 in 2009, resulting in about $120 less interest cost in 2009 compared to 2008.
   
 
4) Other NOI.  Income received from renting underutilized warehouse space in Ireland and parking lot space in Utah for a cell phone tower, offset by bank fees and excise taxes, was $21 in 2008, $80 in 2007 and $5 in 2006.  UTMD expects other NOI in 2009 will be about ($18) because of expected lack of Ireland warehouse space rent in a soft economic period of time.
 
UTMD expects total 2009 NOI will be approximately $200.  That estimate does not include the possibility of a failure of Citibank that would require recognition of a capital loss of approximately $494.  The estimated 2009 NOI may also be lower if UTMD utilizes its invested cash for an acquisition, unexpected litigation costs or substantial share repurchases.

Earnings before income taxes (EBT) result from adding UTMD's non-operating income to its operating income. EBT was $10,777 in 2008, compared to $12,038 in 2007 and $12,418 in 2006.  EBT margin is EBT divided by total sales.  UTMD's EBT margin was 38.8% in 2008, 42.2% in 2007 and 43.2% in 2006.  UTMD is targeting 2009 EBT of about $10,500, in the range of 36-37% of sales.

 
20

 
 
e)  Net Income, EPS and ROE.  Net income is EBT minus income taxes, often called the "bottom line".  Net income was $7,205 in 2008, $7,905 in 2007 and $8,168 in 2006.   The effective consolidated corporate income tax provision rate was 33.1%, 34.3% and 34.2% respectively.  Year to year fluctuations in the tax rate may result from:  1) variations in profits of the Ireland subsidiary which is taxed at a 10% rate on exported manufactured products and a 25% rate on rental and other types of income; 2) special U.S. tax exclusions such as the manufacturing profit deduction; 3) higher marginal tax rates for EBT above $10 million; and 4) other factors such as R&D tax credits.  Management expects the 2009 consolidated income tax provision rate to be closer to the 2007 and 2006 rates.

UTMD's net income expressed as a percentage of sales was 25.9% in 2008, 27.7% in 2007 and 28.4% in 2006.  UTMD's profitability has consistently ranked it in the top performance tier of all U.S. publicly-traded companies, and has been a primary driver for UTMD's past excellent returns on shareholders' equity (ROE).

Earnings per share (EPS) is net income divided by the number of shares of stock outstanding (diluted to take into consideration stock option awards which are "in the money," i.e., have exercise prices below the applicable period's weighted average market value).  Diluted EPS were $1.858 in 2008, $1.982 in 2007 and $2.020 in 2006.  If UTMD achieves the projections above for 2009, EPS will be approximately the same as in 2008 as a result of fewer outstanding shares.

The end of 2008 weighted average number of diluted common shares (the number used to calculate diluted EPS) were 3,878 (in thousands), compared to 3,989 shares in 2007 and 4,043 shares in 2006.  Dilution for "in the money" unexercised options for the year 2008 was 35 shares (in thousands), compared to 62 in 2007 and 100 in 2006.  The total number of options outstanding at year-end 2008 declined 2% from year-end 2007.  Dilution decreased in 2008 from 2007 because the average number of options outstanding decreased, and because the share price in the stock market decreased, diminishing the dilutive effect of each option.  Actual outstanding common shares as of December 31, 2008 were 3,602,761.

Return on shareholders' equity (ROE) is the portion of net income retained by UTMD (after payment of dividends) to internally finance its growth, divided by the average accumulated shareholders' equity during the applicable time period. ROE includes balance sheet measures as well as income statement measures.  ROE for 2008 was 10% excluding the fifth dividend payment which would normally have been paid in January 2009 (20% before dividends), compared to 12% (21% before dividends) in 2007 and 15% (24% before dividends) in 2006.  UTMD's ROE is primarily driven by its high net profit margin, which in 2008 declined to 25.9% from 27.7% in 2007.  ROE was also reduced by a lower debt ratio as UTMD nearly cut its bank loan balance in Ireland by half and had no dividend payable at year-end 2008, but was aided by higher total asset turns. UTMD's ROE (before dividends) has averaged 31% per year over the last 23 years.  This ratio determines how fast the Company can afford to grow without diluting shareholder interests.  For example, a 30% ROE will financially support 30% annual growth in revenues without having to issue more stock.

Looking forward, unless UTMD utilizes its cash to make an acquisition or actively repurchase shares, 2009 ROE will be lower than 2008 because the 2009 net profit margin is projected to be lower while financial leverage and asset utilization remain about the same.  Retaining a high cash balance which returns only about 1-2% dilutes overall ROE.


Liquidity and Capital Resources.
Cash Flows.
Net cash provided by operating activities, including adjustments for depreciation and other non-cash operating expenses, along with changes in working capital and the tax benefit attributable to exercise of employee incentive stock options, totaled $7,762 in 2008, compared to $7,474 in 2007 and $8,403 in 2006.  Compared to 2007, net cash provided by operating activities in 2008 was higher due to a $898 smaller decrease in gain on investments (which occurred largely because the WM capital loss was recognized in net income) and a $482 larger decrease in accounts receivable, among other changes that were generally consistent with excellent balance sheet management in the presence of lower sales activity.  Accelerating into December 2008 the payment of the cash dividend that normally would have been paid in January 2009 resulted in $836 less cash provided by operating activities in 2008.

 
21

 

The Company's use of cash for investing activities was primarily as a result of purchases of liquid investments, in an effort to maximize returns on excess cash balances while maintaining safety and liquidity.  UTMD expended $2,650 in 2008 on such purchases, compared to $2,000 in 2007 and $6,600 in 2006.  In 2008, UTMD received $7,792 from selling short-term investments, compared to $2,023 in 2007 and $4,306 in 2006.  No acquisitions requiring investment of cash were made in any of the three years.

In 2008, UTMD received $224 and issued 18,369 shares of stock upon the exercise of employee stock options.  Employees exercised a total of 20,169 option shares in 2008, with 1,800 shares immediately being retired as a result of some optionees trading the shares in payment of the exercise price of the options.  The Company received a $42 tax benefit from option exercises in 2008.  UTMD repurchased 320,905 shares of stock in the open market at a cost of $7,792 during 2008.  Option exercises in 2008 were at an average price of $13.79 per share.  Share repurchases in the open market were at an average cost of $24.28 per share, including commissions and fees.  In comparison, in 2007 UTMD received $180 from issuing 27,519 shares of stock on the exercise of employee stock options, including 7,543 shares retired upon optionees trading those shares in payment of the stock option exercise price. In 2006, the Company received $627 from issuing 155,823 shares of stock on the exercise of employee and director stock options, including 168,725 shares retired upon employees and directors trading those shares in payment of the stock option exercise price and related tax withholding subject to statutory limitations. UTMD paid $2,700 in 2006 to meet tax withholding requirements on options exercised, but received a $2,450 tax benefit from those exercises.

UTMD did not borrow during 2008, 2007 or 2006.  In December 2005, UTMD's foreign subsidiary borrowed 4.5 million ($5,336) to allow repatriation (from Ireland to the U.S.) of profits achieved since 1996, per The American Jobs Creation Act of 2004.  During 2008, the Bank of Ireland loan terms were modified to no longer require a guarantee by UTMD's line of credit with U.S. Bank.  The U.S. Bank line of credit terminated on May 31, 2008. In 2008, UTMD made repayments of $1,917 on the Ireland note, compared to $1,239 in 2007 and $1,057 in 2006.

Management believes that future income from operations and effective management of working capital will provide the liquidity needed to finance internal growth plans.  Planned 2009 capital expenditures are expected to be less than $500 to keep facilities, equipment and tooling in good working order.  In addition, UTMD may use cash in 2009 for selective infusions of technological, marketing or product manufacturing rights to broaden the Company's product offerings; for continued share repurchases when the price of the stock is undervalued; and if available for a reasonable price, acquisitions that may strategically fit UTMD's business and are accretive to performance.

In summary, management plans to utilize cash not needed to support normal operations in one or a combination of the following:  1) to make investments in new technology and/or processes;  2) to acquire a product line that will augment revenue growth and better utilize UTMD's existing infrastructure; and/or  3) to repurchase UTMD shares in the open marketplace.

Management's Outlook.
In summary, in 2009 UTMD plans to
1)  work to retain its significant global market shares of established key specialty products,
2)  accelerate revenue growth of newer products;
3)  develop additional proprietary products helpful to clinicians through internal new product development;
4)  continue achieving excellent overall financial operating performance;
5)  look for new acquisitions to augment sales growth;  and
6)  utilize current cash balances in shareholders' best long-term interest, including continued cash dividends and open market share repurchases.

The safety, reliability and performance of UTMD's products are high and represent significant clinical benefits while providing minimum total cost of care.  In the U.S., UTMD will continue to leverage its reputation as an innovator which will responsively take on challenges to work with physicians who use its products in specialty hospital areas, or outside the hospital in their office practices.  Internationally, where UTMD must depend on the knowledge, focus, relationships and energy of independent distributors, management will continue to closely monitor performance and recruit needed business partners.

 
22

 
 
UTMD will continue to focus on differentiating itself, especially from commodity-oriented competitors.  UTMD is small, but its employees are experienced and diligent in their work.  UTMD's passion is in providing innovative clinical solutions that will help reduce health risks for women and their babies.  The Company has a fundamental focus to do an excellent job in meeting customers' and patients' needs, while providing shareholders with excellent returns.

Despite the decline in EPS and share price over the last two years, looking back eight years to the end of 2000, UTMD's EPS have more than doubled and the resulting year-ending share price has almost tripled.  Combining this performance with steadily growing dividends since 2004, longer term UTMD shareholders have experienced excellent returns.  In comparison, the NASDAQ Composite, S&P 500 Index and DJIA indices declined 36%, 32% and 19%, respectively, over that same eight year time span.

 In 2008, while the year ending share price decreased 26% (largely in 4Q), UTMD increased dividends/share actually paid (not counting the dividend paid in late December 2008 that would normally have been paid in January 2009) to shareholders by 3.5% (from $.87 in 2007 to $.90 in 2008), and decreased shares outstanding at the end of the year by 7.7%.  This was accomplished in 2008 by UTMD continuing to achieve a high positive cash flow.  UTMD's balance sheet is strong enough to be able to finance a substantial acquisition in 2009 without issuing stock, should an immediately accretive one become available.  In 2008, UTMD also filed an S-3 "shelf" registration statement that gives it speed and flexibility in obtaining additional financing should an acquisition that exceeds current cash availability become available.  In considering acquisitions, UTMD looks to acquire successful companies, products or technologies that will enhance its specialist focus, but not significantly increase its business risk and not dilute its financial performance.

Off Balance Sheet Arrangements
None

Contractual Obligations
The following is a summary of UTMD's significant contractual obligations and commitments as of December 31, 2008:
 
Contractual Obligations and
Commitments
 
Total
   
2009
      2010- 2011       2012- 2013    
2014 and
thereafter
 
                                   
Long-term debt obligations
  $ 2,399     $ 343     $ 686     $ 686     $ 685  
Operating lease obligations
    947       73       80       80       714  
Purchase obligations
    1,494       1,385       109       -       -  
Total
  $ 4,840     $ 1,801     $ 875     $ 766     $ 1,399  
 
Critical Accounting Policies and Estimates
The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities as well as the reported amounts of revenues and expenses during the reporting period.

Management bases its estimates and judgments on historical experience, current economic and industry conditions and on various other factors that are believed to be reasonable under the circumstances. This forms the basis for making judgments about the carrying values of assets and liabilities that are not readily available from other sources. Management has identified the following as the Company's most critical accounting policies which require significant judgment and estimates. Although management believes its estimates are reasonable, actual results may differ from these estimates under different assumptions or conditions.
 
Allowance for doubtful accounts: The majority of the Company's receivables are with hospitals and medical device distributors.  Although the Company has historically not had significant write-offs of bad-debt, the possibility exists, particularly with foreign customers where collection efforts can be difficult or in the event of widespread U.S. hospital bankruptcies.

 
23

 

 
Inventory valuation reserves:  The Company strives to maintain a good balance of inventory to 1) meets its customer's needs while 2) not tying-up an unnecessary amount of the Company's resources increasing the possibility of, among other things, obsolescence.  The Company believes its method of reviewing actual and projected demand for its existing inventory allows it to arrive at a fair inventory valuation reserve. While the Company has historically not had significant inventory write-offs, the possibility exists that one or more of its products may become unexpectedly obsolete for which a reserve has not previously been created. The Company's historical write-offs have not been materially different from its estimates.

Accounting Policy Changes
 
In June 2006, the Financial Accounting Standards Board (FASB) issued FASB Interpretation No. 48, "Accounting for Uncertainty in Income Taxes - an interpretation of FASB Statement No. 109."  This statement clarifies the accounting for uncertainty in income tax positions.  The Company or one of its subsidiaries files or has filed income tax returns in the U.S. federal jurisdiction, in various states and in Ireland.  With few exceptions, UTMD is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2005.  In 2005, the Internal Revenue Service examined the Company's federal income tax returns for 2002 - 2004 and suggested one immaterial adjustment which the Company made. The Company's income tax return for 2005 is presently being audited by the IRS.
The Company adopted the provisions of FIN 48 on January 1, 2007.  UTMD did not make any adjustment to opening retained earnings as a result of the implementation.  The Company recognizes interest accrued related to unrecognized tax benefits in interest expenses and any related penalties in income taxes.  During the years ended December 31, 2008, 2007 and 2006, the Company did not recognize any interest or penalties relating to income taxes.  UTMD did not have any accrual for the payment of interest or penalties at December 31, 2008, 2007 or 2006.


ITEM 7A - QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

The Company had manufacturing operations, including related assets, in Ireland denominated in the Euro, and sold products under agreements denominated in various Western European currencies.  The Euro and other currencies have been and are subject to exchange rate fluctuations that are beyond the control of UTMD.  The exchange rate for the Euro was .7096, .6786 and .7611 per U.S. Dollar as of December 31, 2008, 2007 and 2006, respectively.  Please see note 1 in Item, 8, below under "Translation of Foreign Currencies" for more information.  UTMD manages its foreign currency risk without separate hedging transactions by converting currencies as transactions occur.

 
24

 

ITEM 8 - FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
Dollar amounts are in thousands except per-share amounts and where noted.


TABLE OF CONTENTS
Management's Report on Internal Control Over Financial Reporting
26
Report of Independent Registered Public Accounting Firm on the Company's Internal Control Over Financial Reporting
27
Report of Independent Registered Public Accounting Firm on Financial Statements
28
Consolidated Balance Sheet
29
Consolidated Statement of Income and Comprehensive Income
30
Consolidated Statement of Cash Flow
31
Consolidated Statement of Stockholders' Equity
32
Notes to Consolidated Financial Statements
33




 
25

 

MANAGEMENT'S REPORT ON INTERNAL CONTROL
OVER FINANCIAL REPORTING
 
 
Management of the Company is responsible for establishing and maintaining adequate internal control over financial reporting as defined in Rules 13a-15(f) and 15d-15(f) under the Securities Exchange Act of 1934. The Company's internal control over financial reporting is designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with accounting principles generally accepted in the United States of America ("GAAP"). The Company's internal control over financial reporting includes those policies and procedures that:
 
      pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the Company;
      provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with GAAP, and that receipts and expenditures of the Company are being made only in accordance with authorizations of management and directors of the Company; and
      provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use or disposition of the Company's assets that could have a material effect on the financial statements.
 
Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.
 
As required by Section 404 of the Sarbanes-Oxley Act of 2002, management assessed the effectiveness of the Company's internal control over financial reporting as of December 31, 2008. In making this assessment, management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control-Integrated Framework.
 
Based on its assessment and those criteria, management believes that the Company maintained effective internal control over financial reporting as of December 31, 2008.
 
The Company's independent registered public accounting firm, Jones Simkins, P.C., has audited the Company's internal control over financial reporting as of December 31, 2008, and its report is shown on the next page.
 



By:
  /s/ Kevin L. Cornwell
 
Kevin L. Cornwell
 
Chief Executive Officer
   
   
   
By:
  /s/ Paul O. Richins
 
Paul O. Richins
 
Principal Financial Officer

 
26

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

To the Board of Directors and Stockholders
of Utah Medical Products, Inc.

We have audited Utah Medical Products, Inc.'s internal control over financial reporting as of December 31, 2008, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). Utah Medical Products, Inc.'s management is responsible for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting included in the accompanying Management's Report on Internal Control Over Financial Reporting. Our responsibility is to express an opinion on the Company's internal control over financial reporting based on our audit.

We conducted our audit in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether effective internal control over financial reporting was maintained in all material respects. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audit also included performing such other procedures as we considered necessary in the circumstances. We believe that our audit provides a reasonable basis for our opinion.

A company's internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company's internal control over financial reporting includes those policies and procedures that (1) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (2) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (3) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company's assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

In our opinion, Utah Medical Products, Inc. maintained, in all material respects, effective internal control over financial reporting as of December 31, 2008, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO).

We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), the consolidated balance sheets and the related consolidated statements of income and comprehensive income, stockholders' equity, and cash flows of Utah Medical Products, Inc., and our report dated February 27, 2009 expressed an unqualified opinion.
 
/s/ Jones Simkins, P.C.

JONES SIMKINS, P.C.
Logan, Utah
February 27, 2009

 
27

 
 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 



To the Board of Directors and Stockholders
of Utah Medical Products, Inc.

We have audited the accompanying consolidated balance sheets of Utah Medical Products, Inc. as of December 31, 2008 and 2007, and the related consolidated statements of income and comprehensive income, stockholders' equity, and cash flows for each of the years in the three-year period ended December 31, 2008. Utah Medical Products, Inc.'s management is responsible for these financial statements. Our responsibility is to express an opinion on these financial statements based on our audits.

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements.  An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation.  We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of Utah Medical Products, Inc. as of December 31, 2008 and 2007, and the results of its operations and its cash flows for each of the years in the three-year period ended December 31, 2008 in conformity with accounting principles generally accepted in the United States of America.

We also have audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States), Utah Medical Products, Inc.'s internal control over financial reporting as of December 31, 2008, based on criteria established in Internal Control-Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO), and our report dated February 27, 2009 expressed an unqualified opinion.

 
/s/ Jones Simkins, P.C.
JONES SIMKINS, P.C.
Logan, Utah
February 27, 2009

 
28

 
 
UTAH MEDICAL PRODUCTS, INC.
 
CONSOLIDATED BALANCE SHEET
 
December 31, 2008 and 2007
 
(In thousands)
 
ASSETS
 
2008
   
2007
 
Current assets:
           
Cash
  $ 97     $ 1,251  
Investments, available-for-sale (notes 3 and 4)
    15,927       21,121  
Accounts and other receivables, net (note 2)
    3,517       3,905  
Inventories (note 2)
    3,275       3,153  
Prepaid expenses and other current assets
    214       282  
Deferred income taxes (note 8)
    248       220  
Total current assets
    23,280       29,931  
                 
Property and equipment, net (note 5)
    8,127       8,606  
                 
Goodwill
    7,191       7,191  
                 
Other intangible assets - net (note 2)
    223       258  
                 
Total assets
  $ 38,821     $ 45,986  
                 
LIABILITIES AND STOCKHOLDERS' EQUITY
               
Current liabilities:
               
Accounts payable
  $ 418     $ 393  
Accrued expenses (note 2)
    1,086       2,349  
Current portion of note payable (note 6)
    265       423  
Total current liabilities
    1,768       3,165  
                 
Note payable (note 6)
    1,828       3,689  
Deferred income taxes (note 8)
    420       343  
Total liabilities
    4,016       7,197  
Commitments and contingencies (notes 7 and 12)
    -       -  
                 
Stockholders' equity:
               
Preferred stock, $.01 par value; 5,000 shares authorized, no shares issued and outstanding
    -       -  
Common stock, $.01 par value; 50,000 shares authorized, issued 3,603 shares in 2008 and 3,905 shares in 2007
    36       39  
Accumulated other comprehensive income
    (1,122 )     (789 )
Retained earnings
    35,892       39,539  
Total stockholders' equity
    34,805       38,789  
                 
Total liabilities and stockholders' equity
  $ 38,821     $ 45,986  
 
See accompanying notes to financial statements.

29

 
UTAH MEDICAL PRODUCTS, INC.
 
CONSOLIDATED STATEMENT OF INCOME
 
AND COMPREHENSIVE INCOME
 
Years ended December 31, 2008, 2007 and 2006
 
(In thousands, except per share amounts)
 
                   
   
2008
   
2007
   
2006
 
Sales, net (notes 10 and 11)
  $ 27,782     $ 28,502     $ 28,753  
Cost of goods sold
    12,764       12,714       12,606  
Gross profit
    15,018       15,788       16,147  
Operating income (expense):
                       
Sales and marketing expense
    (1,816 )     (2,075 )     (2,272 )
Research and development expense
    (359 )     (382 )     (316 )
General and administrative expense
    (2,454 )     (2,575 )     (2,725 )
Operating income
    10,389       10,756       10,835  
Other income (expense):
                       
Dividend and interest income
    543       1,003       862  
Capital gains and (losses) on investments
    (428 )     19       520  
Royalty income (note 12)
    450       450       450  
Interest expense
    (198 )     (270 )     (255 )
Other, net
    21       80       5  
Income before provision for income taxes
    10,777       12,038       12,418  
Provison for income taxes (note 8)
    3,572       4,134       4,250  
Net income
  $ 7,205     $ 7,905     $ 8,168  
                         
Earnings per common share (basic) (note 1):
  $ 1.87     $ 2.01     $ 2.07  
                         
Earnings per common share (diluted) (note 1):
  $ 1.86     $ 1.98     $ 2.02  
                         
Other comprehensive income:
                       
Foreign currency translation net of taxes of $(93), $29 and $(41)
  $ (146 )   $ 58     $ (75 )
Unrealized loss on investments net of taxes of $(60), $(100) and $(69)
    (94 )     (156 )     (109 )
Total comprehensive income
  $ 6,965     $ 7,807     $ 7,984  
 
See accompanying notes to financial statements.

 
30

 
 
UTAH MEDICAL PRODUCTS, INC.
 
CONSOLIDATED STATEMENT OF CASH FLOW
 
Years Ended December 31, 2008, 2007 and 2006
 
(In thousands)
 
   
2008
   
2007
   
2006
 
Cash flows from operating activities:
                 
Net income
  $ 7,205     $ 7,905     $ 8,168  
Adjustments to reconcile net income to net cash provided by operating activities:
                       
Depreciation and amortization
    591       597       634  
Gain on investments
    (94 )     (992 )     (1,375 )
Provision for (recovery of) losses on accounts receivable
    (42 )     (30 )     29  
(Gain) loss on disposal of assets
    0       3       -  
Deferred income taxes
    (46 )     93       118  
Stock-based compensation expense
    120       95       140  
(Increase) decrease in:
                       
Accounts receivable
    365       (117 )     (37 )
Accrued interest and other receivables
    27       64       709  
Inventories
    (70 )     (80 )     35  
Prepaid expenses and other current assets
    60       (11 )     1  
Increase (decrease) in:
                       
Accounts payable
    25       (207 )     74  
Accrued expenses
    (380 )     154       (92 )
Net cash provided by operating activities
    7,762       7,474       8,403  
                         
Cash flows from investing activities:
                       
Capital expenditures for:
                       
Property and equipment
    (274 )     (307 )     (334 )
Intangible assets
    (13 )     (53 )     -  
Purchases of investments
    (2,650 )     (2,000 )     (6,600 )
Proceeds from the sale of:
                       
Investments
    7,792       2,023       4,306  
Net cash used in investing activities
    4,856       (337 )     (2,628 )
                         
Cash flows from financing activities:
                       
Proceeds from issuance of common stock - options
    224       180       627  
Common stock purchased and retired
    (7,792 )     (2,023 )     (2,094 )
Common stock purchased and retired - options
    -       -       (2,700 )
Tax benefit attributable to exercise of stock options
    42       60       2,450  
Repayments of note payable
    (1,917 )     (1,239 )     (1,057 )
Dividends paid
    (4,329 )     (3,423 )     (2,902 )
Net cash used in financing activities
    (13,772 )     (6,445 )     (5,676 )
                         
Effect of exchange rate changes on cash
    1       (52 )     (191 )
                         
Net increase (decrease) in cash and cash equivalents
    (1,153 )     640       (92 )
                         
Cash at beginning of year
    1,251       610       703  
                         
Cash at end of year
  $ 97     $ 1,251     $ 610  
                         
SUPPLEMENTAL DISCLOSURE OF CASH FLOW INFORMATION:
                 
Cash paid during the year for:
                       
Income taxes
  $ 3,360     $ 3,757     $ 1,866  
Interest
    198       270       255  
 
See accompanying notes to financial statements.

 
31

 
 
UTAH MEDICAL PRODUCTS, INC.
 
CONSOLIDATED STATEMENT OF STOCKHOLDERS' EQUITY
 
Years Ended December 31, 2008, 2007 and 2006
 
(In thousands)
 
                     
Accumulated
             
               
Additional
   
Other
         
Total
 
   
Common Stock
   
Paid-in
   
Comprehensive
   
Retained
   
Stockholders'
 
   
Shares
   
Amount
   
Capital
   
Income
   
Earnings
   
Equity
 
Balance at December 31, 2005
    3,856     $ 39     $ -     $ (495 )   $ 33,314     $ 32,857  
Shares issued upon exercise of employee
  stock options for cash
    325       3       3,406       -       -       3,409  
Shares received and retired upon exercise
  of stock options
    (169 )     (2 )     (5,481 )     -       -       (5,483 )
Tax benefit attributable to appreciation
  of stock options
    -       -       2,450       -       -       2,450  
Stock option compensation expense
    -       -       140       -       -       140  
Common stock purchased and retired
    (69 )     (1 )     (515 )     -       (1,610 )     (2,125 )
Foreign currency translation adjustment
    -       -       -       (116 )     -       (116 )
Unrealized holding loss from investments,
  available-for-sale, net of taxes
    -       -       -       (109 )     -       (109 )
Common stock dividends
    -       -       -       -       (3,076 )     (3,076 )
Net income
    -       -       -       -       8,168       8,168  
Balance at December 31, 2006
    3,944     $ 39     $ -     $ (720 )   $ 36,796     $ 36,115  
                                                 
Shares issued upon exercise of employee
  stock options for cash
    35       0       431       -       -       431  
Shares received and retired upon exercise
  of stock options
    (8 )     (0 )     (251 )     -       -       (252 )
Tax benefit attributable to appreciation
  of stock options
    -       -       60       -       -       60  
Stock option compensation expense
    -       -       95       -       -       95  
Common stock purchased and retired
    (66 )     (1 )     (335 )     -       (1,688 )     (2,023 )
Foreign currency translation adjustment
    -       -       -       87       -       87  
Unrealized holding loss from investments,
  available-for-sale, net of taxes
    -       -       -       (156 )     -       (156 )
Common stock dividends
    -       -       -       -       (3,474 )     (3,474 )
Net income
    -       -       -       -       7,905       7,905  
Balance at December 31, 2007
    3,905     $ 39     $ -     $ (789 )   $ 39,539     $ 38,789  
                                                 
Shares issued upon exercise of employee
  stock options for cash
    20       0       278       -       -       278  
Shares received and retired upon exercise
  of stock options
    (2 )     (0 )     (54 )     -       -       (54 )
Tax benefit attributable to appreciation
  of stock options
    -       -       42       -       -       42  
Stock option compensation expense
    -       -       120       -       -       120  
Common stock purchased and retired
    (321 )     (3 )     (386 )     -       (7,404 )     (7,792 )
Foreign currency translation adjustment
    -       -       -       (239 )     -       (239 )
Unrealized holding loss from investments,
  available-for-sale, net of taxes
    -       -       -       (94 )     -       (94 )
Common stock dividends
    -       -       -       -       (3,449 )     (3,449 )
Net income
    -       -       -       -       7,205       7,205  
Balance at December 31, 2008
    3,603     $ 36     $ -     $ (1,122 )   $ 35,891     $ 34,805  
 
See accompanying notes to financial statements.

 
32

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Dollar amounts are in thousands except per-share amounts and where noted.

Note 1 - Summary of Significant Accounting Policies

Organization

Utah Medical Products, Inc. and its wholly owned subsidiaries, principally Utah Medical Products Ltd., which operates a manufacturing facility in Ireland, and Columbia Medical, Inc., (the Company) are in the business of producing specialized devices for the healthcare industry.  The Company's broad range of products includes those used in critical care areas and the labor and delivery departments of hospitals, as well as outpatient clinics and physicians' offices.  Products are sold in both domestic U.S. and international markets.

Use of Estimates in the Preparation of Financial Statements

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.  Although actual results could differ from those estimates, management believes it has considered and disclosed all relevant information in making its estimates that materially affect reported performance and current values.

Principles of Consolidation

The consolidated financial statements include those of the Company and its subsidiaries.  All intercompany accounts and transactions have been eliminated in consolidation.

Cash and Cash Equivalents

For purposes of the consolidated statement of cash flows, the Company considers cash on deposit and short-term investments with original maturities of three months or less to be cash and cash equivalents.

Investments

The Company classifies its investments as "available for sale."  Securities classified as "available for sale" are carried in the financial statements at fair value.  Realized gains and losses, determined using the specific identification method, are included in operations; unrealized holding gains and losses are reported as a separate component of accumulated other comprehensive income.  Declines in fair value below cost that are other than temporary are included in operations.  As of December 31, 2008 the Company's investments are in Fidelity Cash Reserves (FDRXX), General Electric (GE), Citigroup (C) and the surviving remnant of Washington Mutual (WAMUQ).

Concentration of Credit Risk

The primary concentration of credit risk consists of trade receivables.  In the normal course of business, the Company provides credit terms to its customers.  Accordingly, the Company performs ongoing credit evaluations of its customers and maintains allowances for possible losses which, when realized, have been within the range of management's expectations as reflected by its reserves.

The Company's customer base consists of hospitals, medical product distributors, physician practices and others directly related to healthcare providers, as well as other manufacturing companies.  Although the Company is affected by the well-being of the global healthcare industry, management does not believe significant trade receivable credit risk exists at December 31, 2008 except under an extreme global financial crisis.

The Company maintains its cash in bank deposit accounts in addition to Fidelity Investments accounts.  The Company has not experienced any losses in such accounts and believes it is not exposed to a significant credit risk on cash and cash equivalent balances unless FDRXX is at risk of "breaking the buck" and the Federal Reserve does not provide support to prevent that from happening, as they currently are.

 
33

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 1 - Summary of Significant Accounting Policies (continued)

Accounts Receivable

Accounts receivable are amounts due on product sales and are unsecured.  Accounts receivable are carried at their estimated collectible amounts.  Credit is generally extended on a short-term basis; thus accounts receivable do not bear interest although a finance charge may be applied to such receivables that are past the due date.  Accounts receivable are periodically evaluated for collectibility based on past credit history with clients.  Provisions for losses on accounts receivable are determined on the basis of loss experience, known and inherent risk in the account balance and current economic conditions (see note 2).

Inventories

Finished products, work-in-process, raw materials and supplies inventories are stated at the lower of cost (computed on a first-in, first-out method) or market (see note 2).

Property and Equipment

Property and equipment are stated at cost.  Depreciation and amortization are computed using the straight-line and units-of-production methods over estimated useful lives as follows:
Building and improvements
15-40 years
Furniture, equipment and tooling
3-10 years

Long-Lived Assets

The Company evaluates its long-lived assets in accordance with Statement of Financial Accounting Standards (SFAS) No. 144, "Accounting for the Impairment of Long-Lived Assets."  Long-lived assets held and used by the Company are reviewed for impairment whenever events or changes in circumstances indicate that their net book value may not be recoverable.  When such factors and circumstances exist, the Company compares the projected undiscounted future cash flows associated with the related asset or group of assets over their estimated useful lives against their respective carrying amounts.  Impairment, if any, is based on the excess of the carrying amount over the fair value of those assets and is recorded in the period in which the determination was made.

Intangible Assets

Costs associated with the acquisition of patents, trademarks, license rights and non-compete agreements are capitalized and are being amortized using the straight-line method over periods ranging from 5 to 20 years. UTMD's goodwill is tested for impairment annually, in the fourth quarter of each year, using a fair value measurement test, in accordance with SFAS 142. UTMD would also perform an impairment test, between annual tests, if circumstances changed that would more than likely reduce the fair value of goodwill below its net book value.  If UTMD determined that its goodwill were impaired, a second step would be completed to measure the amount of the impairment loss. UTMD does not expect its goodwill to become impaired in the foreseeable future (see note 2).

Loans to Related Parties

The Company has not made loans to related entities including employees, directors, shareholders, suppliers or customers, nor does it guarantee the debt of related entities, except to the extent that UTMD might extend accounts receivable terms to its customers on an interim basis.

Revenue Recognition

The Company recognizes revenue at the time of shipment as title generally passes to the customer at the time of shipment. Revenue recognized by UTMD is based upon documented arrangements and fixed contracts in which the selling price is fixed prior to completion of an order. Revenue from product and service sales is generally recognized at the time the product is shipped or service completed and invoiced, and collectibility is reasonably assured.  There are circumstances under which revenue may be recognized when product is not shipped, which meet the criteria of SAB 104: the Company provides engineering services, for example, design and production of manufacturing tooling that may be used in subsequent UTMD manufacturing of custom components for other companies.  This revenue is recognized when UTMD's service has been completed according to a fixed contractual agreement.

 
34

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 1 - Summary of Significant Accounting Policies (continued)

Income Taxes

The Company accounts for income taxes under SFAS No. 109, "Accounting for Income Taxes," whereby deferred taxes are computed under the asset and liability method.

Legal Costs

The Company has been involved in lawsuits which are an expected consequence of its operations and in the ordinary course of business.  The Company maintains a reserve for legal costs which are probable and estimated based on its previous experience.  The reserve for legal costs at December 31, 2008 and 2007 was $80 and $32, respectively (see note 2).

Earnings per Share

The computation of basic earnings per common share is based on the weighted average number of shares outstanding during each year.

The computation of earnings per common share assuming dilution is based on the weighted average number of shares outstanding during the year plus the weighted average common stock equivalents which would arise from the exercise of stock options outstanding using the treasury stock method and the average market price per share during the year.

The shares (in thousands) used in the computation of the Company's basic and diluted earnings per share are reconciled as follows:
 
   
2008
   
2007
   
2006
 
Weighted average number of shares outstanding - basic
    3,843       3,927       3,943  
Dilutive effect of stock options
    35       62       100  
                         
Weighted average number of shares outstanding, assuming dilution
    3,878       3,989       4,043  

Stock-Based Compensation

At December 31, 2008, the Company has stock-based employee compensation plans, which are described more fully in note 9.  The Company accounts for stock compensation under Statement of Financial Accounting Standards 123R, Share-Based Payment.  This statement requires the Company to recognize compensation cost based on the grant date fair value of options granted to employees and directors.  In 2008, the Company recognized $120 in compensation cost compared to $95 in 2007 and $140 in 2006.

Translation of Foreign Currencies

Assets and liabilities of the Company's foreign subsidiary are translated into U.S. dollars at the applicable exchange rates at year-end.  Net gains or losses resulting from the translation of the Company's assets and liabilities are reflected as a separate component of stockholders' equity.  A negative translation impact on stockholders' equity reflects a current relative U.S. Dollar value higher than at the point in time that assets were actually acquired in a foreign currency.  A positive translation impact would result from a U.S. dollar weaker in value than at the point in time foreign assets were acquired.

Income and expense items are translated at the weighted average rate of exchange (based on when transactions actually occurred) during the year.

 
35

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 2 - Detail of Certain Balance Sheet Accounts

   
December 31,
 
   
2008
   
2007
 
Accounts and other receivables:
           
Accounts receivable
  $ 3,403     $ 3,804  
Income tax receivable
    139       150  
Accrued interest and other
    9       26  
Less allowance for doubtful accounts
    (34 )     (75 )
    $ 3,517     $ 3,905  
                 
Inventories:
               
Finished products
  $ 1,353     $ 1,245  
Work-in-process
    817       694  
Raw materials
    1,105       1,214  
    $ 3,275     $ 3,153  
                 
Other intangible assets:
               
Patents
  $ 1,961     $ 1,948  
License rights
    293       293  
Trademarks
    224       224  
Non-compete agreements
    175       175  
      2,653       2,640  
Accumulated amortization
    (2,430 )     (2,382 )
    $ 223     $ 258  
                 
Accrued expenses:
               
Income taxes payable
  $ 23     $ 10  
Payroll and payroll taxes
    765       962  
Reserve for litigation costs
    80       32  
Dividends payable
    -       880  
Other
    218       465  
    $ 1,086     $ 2,349  

Note 3 - Investments

The Company's investments, classified as available-for-sale consist of the following:

   
December 31,
 
   
2008
   
2007
 
             
Investments, at cost
  $ 16,337     $ 21,377  
Equity securities:
               
-Unrealized holding gains
    -       -  
-Unrealized holding (losses)
    (410 )     (256 )
                 
Investments, at fair value
  $ 15,927     $ 21,121  

Changes in the unrealized holding gain on investment securities available-for-sale and reported as a separate component of accumulated other comprehensive income are as follows:

   
December 31,
 
   
2008
   
2007
 
             
Balance, beginning of year
  $ (156 )   $ -  
Realized loss from securities included in beginning balance
    186       -  
Gross unrealized holding gains (losses) in equity securities
    (340 )     (256 )
Deferred income taxes on unrealized holding loss
    60       100  
                 
Balance, end of year
  $ (250 )   $ (156 )

 During 2008, 2007 and 2006, UTMD had proceeds from sales of available-for-sale securities of $7,792, $2,023 and $4,306, respectively.

 
36

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 4 - Fair Value Measurements

In September 2006, the Financial Accounting Standards Board ("FASB") issued Statement of Financial Accounting Standards ("SFAS") No. 157 "Fair Value Measurements."   This statement defines fair value, establishes a framework for measuring fair value in generally accepted accounting principles and expands disclosures about fair value measurements.  SFAS 157 is effective for fiscal years beginning after November 15, 2007, and interim periods within those fiscal years.  UTMD adopted the requirements of SFAS 157 on January 1, 2008.

The following table provides financial assets carried at fair value measured as of December 31, 2008:
 
       
Fair Value Measurements Using
Description
 
Total Fair Value at 12/31/2008
 
Quoted Prices in Active Markets for Identical Assets
(Level 1)
 
Significant Other Observable Inputs
(Level 2)
 
Significant Unobservable Inputs
(Level 3 )
Available-for-sale securities
 
$ 15,927
 
$ 15,927
 
$  0
 
$  0


Note 5 - Property and Equipment

Property and equipment consists of the following:
   
December 31,
 
   
2008
   
2007
 
             
Land
  $ 1,105     $ 1,127  
Buildings and improvements
    9,644       9,820  
Furniture, equipment and tooling
    14,549       14,432  
Construction-in-progress
    78       119  
      25,376       25,498  
                 
Accumulated depreciation and amortization
    (17,249 )     (16,892 )
                 
    $ 8,127     $ 8,606  

Included in the Company's consolidated balance sheet are the assets of its manufacturing facilities in Utah, Oregon and Ireland.  Property and equipment, by location, are as follows:

   
December 31, 2008
 
   
Utah
   
Oregon
   
Ireland
   
Total
 
                         
Land
  $ 621     $ -     $ 484     $ 1,105  
Building and improvements
    4,502       32       5,109       9,644  
Furniture, equipment and tooling
    12,312       1,287       950       14,549  
Construction-in-progress
    78       -       -       78  
Total
    17,513       1,319       6,543       25,376  
                                 
Accumulated depreciation
    (13,819 )     (1,288 )     (2,142 )     (17,249 )
                                 
Property and equipment, net
  $ 3,695     $ 31     $ 4,401     $ 8,127  
                                 
                                 
   
December 31, 2007
 
   
Utah
   
Oregon
   
Ireland
   
Total
 
                                 
Land
  $ 621     $ -     $ 506     $ 1,127  
Building and improvements
    4,452       32       5,336       9,820  
Furniture, equipment and tooling
    12,169       1,264       999       14,432  
Construction-in-progress
    119       -       -       119  
Total
    17,361       1,296       6,841       25,498  
                                 
Accumulated depreciation
    (13,486 )     (1,277 )     (2,129 )     (16,892 )
                                 
Property and equipment, net
  $ 3,875     $ 19     $ 4,712     $ 8,606  


 
37

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 6 - Long-term Debt

In December 2005 the Company borrowed 4.5 million ($5,336) from the Bank of Ireland to finance repatriation of profits achieved since 1996 under The American Jobs Creation Act of 2004.  The loan term is 10-years at an interest rate of 1.10% plus the bank's money market rate, which is a total of the bank's cost of funds and cost of liquidity.  The balance on the note at December 31, 2008 was $2,093 (1,485).

The following table shows estimated minimum required amortization of the note during the next five years using the December 31, 2008 interest rate of 3.95%, starting with a December 31, 2008 balance of $2,093:

                     
Ending
 
Year
 
Payments
   
Interest
   
Principal
   
Balance
 
                         
2009
  $ 343     $ 78     $ 265     $ 1,828  
2010
    343       67       275       1,552  
2011
    343       56       286       1,266  
2012
    343       45       298       968  
2013
    343       33       310       658  
Thereafter
    685       27       658       -  
                                 
Total
  $ 2,399     $ 306     $ 2,093          


Note 7 - Commitments and Contingencies

Operating Leases

The Company has a lease agreement for land adjoining its Utah facility for a term of forty years commencing on September 1, 1991.  On September 1, 2001 and subsequent to each fifth lease year, the basic rental was and will be adjusted for published changes in a price index.  The Company also leases its CMI building in Oregon under a one-year non-cancelable operating lease.  Rent expense charged to operations under these operating lease agreements was approximately $107, $107 and $107 for the years ended December 31, 2008, 2007 and 2006, respectively.

Future minimum lease payments under its lease obligations as of December 31, 2008 were as follows:

Years ending December 31:
 
Amount
 
       
2009
  $ 73  
2010
    40  
2011
    40  
2012
    40  
2013
    40  
Thereafter
    714  
         
Total future minimum lease payments
  $ 947  

Purchase Obligations

The Company has obligations to purchase raw materials for use in its manufacturing operations.  The Company has the right to make changes in, among other things, purchase quantities, delivery schedules and order acceptance.

Product Liability

The Company is self-insured for product liability risk. "Product liability" is an insurance industry term for the cost of legal defense and possible damages awarded as a result of use of a company's product during a procedure which results in an injury of a patient.  The Company maintains a reserve for product liability litigation and damages consistent with its previous long-term experience.  Actual product liability litigation costs and damages during the last three reporting years have been immaterial, which is consistent with the Company's overall history.

The Company absorbs the costs of clinical training and trouble-shooting in its on-going operating expenses.

 
38

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 7 - Commitments and Contingencies (continued)

Warranty Reserve

UTMD maintains a warranty reserve to provide for estimated costs which are likely to occur. The amount of this reserve is adjusted, as required, to reflect its historical experience. The following table summarizes changes to UTMD's warranty reserve during 2008:

Beginning balance, January 1, 2008
  $ 40  
Changes in warranty reserve during 2008:
       
Aggregate reductions for warranty repairs
    -  
Aggregate changes for warranties issued during reporting period
    40  
Aggregate changes in reserve related to preexisting warranties
    (80 )
Ending balance, December 31, 2008
  $ 0  

Litigation

The Company has been involved in lawsuits which are an expected consequence of its operations and in the ordinary course of business.  There is one such lawsuit currently pending.  The Company applies its accounting policy to accrue legal costs that can be reasonably estimated.

Irish Development Agency

In order to satisfy requirements of the Irish Development Agency in assisting the start-up of its Ireland subsidiary, the Company agreed to invest certain amounts and maintain a certain capital structure in its Ireland subsidiary.  The effect of these financial relationships and commitments are reflected in the consolidated financial statements and do not represent any significant credit risk that would affect future liquidity.
 

Note 8 - Income Taxes

Deferred tax assets (liabilities) consist of the following temporary differences:

   
December 31,
 
   
2008
   
2007
 
   
Current
   
Long-term
   
Current
   
Long-term
 
                         
Inventory write-downs and differences due to UNICAP
  $ 75     $ -     $ 89     $ -  
Allowance for doubtful accounts
    10       -       23       -  
Accrued liabilities and reserves
    163       -       108       16  
Other
    -       (224 )     -       (248 )
Depreciation and amortization
    -       (356 )     -       (211 )
Unrealized investment gains
    -       160       -       100  
Deferred income taxes, net
  $ 248     $ (420 )   $ 220     $ (343 )

The components of income tax expense are as follows:

   
Years ended December 31,
 
   
2008
   
2007
   
2006
 
                   
Current
  $ 3,463     $ 3,194     $ 4,049  
Deferred
    109       220       201  
                         
Total
  $ 3,572     $ 4,134     $ 4,250  
 
 
39

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 8 - Income Taxes (continued)

Income tax expense differed from amounts computed by applying the statutory federal rate to pretax income as follows:

   
Years ended December 31,
 
   
2008
   
2007
   
2006
 
Federal income tax expense at the statutory rate
  $ 3,664     $ 4,093     $ 4,222  
State income taxes
    323       397       410  
ETI, manufacturing deduction and tax credits
    (206 )     (203 )     (154 )
Other
    (209 )     (153 )     (228 )
                         
Total
  $ 3,572     $ 4,134     $ 4,250  


Note 9 - Options

The Company has stock option plans which authorize the grant of stock options to eligible employees, directors and other individuals to purchase up to an aggregate of 819,161 shares of common stock, of which 208,257 are outstanding as of December 31, 2008.  All options granted under the plans are granted at current market value at the date of grant, and may be exercised between six months and ten years following the date of grant.  The plans are intended to advance the interest of the Company by attracting and ensuring retention of competent directors, employees and executive personnel, and to provide incentives to those individuals to devote their utmost efforts to the advancement of the Company.  Changes in stock options were as follows:

         
Price Range
 
   
Shares
   
Per Share
 
2008
                 
Granted
    26,100     $ 28.13  -   $ 29.41  
Expired or canceled
    9,919       18.00  -     31.33  
Exercised
    20,169       6.75  -     25.59  
Total outstanding at December 31
    208,257       6.50  -     31.33  
Total exercisable at December 31
    168,457       6.50  -     31.33  
                         
2007
                       
Granted
    23,600     $ 31.33  -   $ 31.33  
Expired or canceled
    4,237       18.00  -     31.33  
Exercised
    35,062       6.50  -     29.86  
Total outstanding at December 31
    212,245       6.50  -     31.33  
Total exercisable at December 31
    171,618       6.50  -     29.86  
                         
2006
                       
Granted
    14,600     $ 29.86  -   $ 29.86  
Expired or canceled
    10,729       14.60  -     29.86  
Exercised
    324,548       6.50  -     25.59  
Total outstanding at December 31
    227,944       6.50  -     29.86  
Total exercisable at December 31
    191,010       6.50  -     25.59  

For the years ended December 31, 2008, 2007 and 2006, the Company reduced current income taxes payable and increased additional paid-in capital by $42, $60 and $2,450, respectively, for the income tax benefit attributable to sale by optionees of common stock received upon the exercise of stock options.

Stock-Based Compensation

In 2008, the Company recognized $120 in equity compensation cost, compared to $95 in 2007 and $140 in 2006.

 
40

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 9 - Options (continued)
Stock Based Compensation (continued)

The fair value of each option grant is estimated on the date of grant using the Black-Scholes option pricing model with the following weighted average assumptions:
 
 
Years ended December 31,
 
2008
 
2007
 
2006
Expected dividend amount per quarter
$0.2737
 
$0.2638
 
$0.2521
Expected stock price volatility
16.3%
 
17.9%
 
28.1%
Risk-free interest rate
2.92%
 
4.56%
 
5.0%
Expected life of options
5.3 years
 
5.6 years
 
5.3 years

The per share weighted average fair value of options granted during 2008, 2007 and 2006 is $2.91, $5.10 and $7.29, respectively.

The following table summarizes information about stock options outstanding at December 31, 2008:

     
Options Outstanding
   
Options Exercisable
 
           
Weighted
                   
           
Average
                   
           
Remaining
   
Weighted
         
Weighted
 
Range of
         
Contractual
   
Average
         
Average
 
Exercise
   
Number
   
Life
   
Exercise
   
Number
   
Exercise
 
Prices
   
Outstanding
   
(Years)
   
Price
   
Exercisable
   
Price
 
                                 
$ 6.50 - 15.01       32,889       1.96     $ 10.16       32,889     $ 10.16  
  17.71 - 24.02       53,781       5.24       21.04       52,010       21.02  
  25.59 - 31.33       121,587       6.54       27.39       83,558       26.37  
$ 6.50 - 31.33       208,257       5.48     $ 23.03       168,457     $ 21.55  


Note 10 - Geographic Sales Information

The Company had sales in the following geographic areas:

   
United States
   
Europe
   
Other
 
                   
2008
  $ 19,114     $ 4,779     $ 3,889  
2007
    19,926       4,754       3,822  
2006
    21,363       3,888       3,502  


Note 11 - Revenues by Product Category

The Company had revenues in the following product categories:

Product Category
 
2008
   
2007
   
2006
 
                   
Obstetrics
  $ 7,054     $ 8,473     $ 9,371  
Gynecology/Electrosurgery/Urology
    6,157       6,143       6,106  
Neonatal
    7,408       7,062       7,073  
Blood Pressure Monitoring and Accessories
    7,163       6,824       6,203  
 
 
41

 

UTAH MEDICAL PRODUCTS, INC.
Notes to Consolidated Financial Statements

Note 12 - Product Sale and Purchase Commitments

The Company has had license agreements for the rights to develop and market certain products or technologies owned by unrelated parties.  The confidential terms of such agreements are unique and varied, depending on many factors relating to the value and stage of development of the technology licensed.  Royalties on future product sales are a normal component of such agreements and are included in the Company's cost of goods sold on an ongoing basis.

The Company received royalties as a result of a license agreement with an unrelated company that allowed rights to the Company's technology through the life of the applicable patents.  At the start of 2009 there are no patents under which UTMD is receiving royalties from other parties.


Note 13 - Employee Benefit Plan

The Company sponsors a contributory 401(k) savings plan for U.S. employees, and a contributory retirement plan for Irish employees.  The Company's matching contribution is determined annually by the board of directors.  Company contributions were approximately $115, $107 and $103 for the years ended December 31, 2008, 2007 and 2006, respectively.


Note 14 - Fair Value Financial Instruments

None of the Company's financial instruments, which are current assets and liabilities that could be readily traded, are held for trading purposes, except investments.  Detail on investments is provided in note 3, above.  The Company estimates that the fair value of all financial instruments at December 31, 2008 does not differ materially from the aggregate carrying value of its financial instruments recorded in the accompanying consolidated balance sheet.


Note 15 - Recent Accounting Pronouncements

In June 2006, the Financial Accounting Standards Board (FASB) issued FASB Interpretation No. 48, "Accounting for Uncertainty in Income Taxes - an interpretation of FASB Statement No. 109."  This statement clarifies the accounting for uncertainty in income tax positions.  The Company or one of its subsidiaries files or has filed income tax returns in the U.S. federal jurisdiction, in various states and in Ireland.  With few exceptions, UTMD is no longer subject to U.S. federal, state and local, or non-U.S. income tax examinations by tax authorities for years before 2007.  In 2005, the Internal Revenue Service examined the Company's federal income tax returns for 2002 - 2004 and suggested one immaterial adjustment which the Company made.  The Company's income tax return for 2005 is presently being audited by the IRS.

The Company adopted the provisions of FIN 48 on January 1, 2007.  UTMD did not make any adjustment to opening retained earnings as a result of the implementation.  The Company recognizes interest accrued related to unrecognized tax benefits in interest expenses and any related penalties in income taxes.  During the years ended December 31, 2008, 2007 and 2006, the Company did not recognize any interest or penalties relating to income taxes.  UTMD did not have any accrual for the payment of interest or penalties at December 31, 2008, 2007 or 2006.

 
42

 

ITEM 9 - CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.


ITEM 9A - CONTROLS AND PROCEDURES

Evaluation of Disclosure Controls and Procedures.
UTMD Management is responsible for establishing and maintaining adequate internal control over financial reporting, as defined in the Securities Exchange Act of 1934 Rule 13a-15(e).  UTMD's Board of Directors, operating through its audit committee, provides oversight to its financial reporting process.

During 2008, UTMD evaluated the effectiveness of the design and operation of its disclosure controls and procedures. Based on that evaluation, UTMD's Chief Executive Officer and Principal Financial Officer concluded that, as of December 31, 2008, its disclosure controls and procedures were effective.

Management's Report on Internal Control Over Financial Reporting.
Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, the Company has included, as part of this Form 10-K, a report of management's assessment of the effectiveness of its internal controls as of December 31, 2008.  Jones Simkins, P.C., the independent registered public accounting firm of the Company, has audited the effectiveness of the Company's internal control over financial reporting. Management's report, and the report of Jones Simkins, P.C. appear on pages 26 and 27 of this Form 10-K under the captions "Management's Report on Internal Control Over Financial Reporting" and "Report of Independent Registered Public Accounting Firm" and are incorporated herein by reference.

Changes in Internal Control Over Financial Reporting.
There have been no changes in UTMD's internal control over financial reporting that materially affected, or were reasonably likely to materially affect, the Company's internal control over financial reporting during the fourth quarter of the fiscal year ended December 31, 2008, and there were no material weaknesses.


ITEM 9B - OTHER INFORMATION

None.

 
43

 

PART III

ITEM 10 - DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders under the captions,

 
"PROPOSAL NO. 1. ELECTION OF DIRECTORS: General," and "Directors and Nominees,"
 
 
"SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN PERSONS," and
 
 
"EXECUTIVE OFFICER COMPENSATION: 2007 Director Compensation,"

is incorporated herein by reference.

UTMD adopted a Code of Ethics for its executive officers, including the Chief Executive Officer and outside directors, in October 2003.  The Code of Ethics, along with UTMD's Code of Conduct, which covers all exempt employees (including all officers and outside directors) and certain non-exempt employees, is posted on UTMD's web site at www.utahmed.com.  UTMD intends to post on its website any waivers of or amendments to its Code of Ethics.


ITEM 11 - EXECUTIVE COMPENSATION

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders under the captions,

 
"EXECUTIVE OFFICER COMPENSATION,"
 
 
" COMPENSATION DISCUSSION AND ANALYSIS," and
 
 
" BOARD OF DIRECTORS AND OTHER BOARD COMMITTEE REPORTS: Compensation and Option Committee Interlocks and Insider Participation," specifically excluding the "Report of the Compensation Committee"

is incorporated herein by reference.


ITEM 12 - SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders under the captions,

 
"SECURITY OWNERSHIP OF MANAGEMENT AND CERTAIN PERSONS" and
 
 
"DISCLOSURE RESPECTING THE COMPANY'S EQUITY COMPENSATION PLANS"

is incorporated herein by reference.

 
44

 

ITEM 13 - CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders under the captions,

 
"CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS"
 
 
"BOARD OF DIRECTORS AND OTHER BOARD COMMITTEE REPORTS: Director Independence"

is incorporated herein by reference.

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders in the first paragraph under the caption, "Report of the Audit Committee" is incorporated herein by reference.


ITEM 14 - PRINCIPAL ACCOUNTING FEES AND SERVICES

The information from the definitive proxy statement of the registrant for the 2009 annual meeting of shareholders under the caption "Independent Public Accountants" is incorporated herein by reference.


 
45

 

PART IV

ITEM 15 - EXHIBITS, FINANCIAL STATEMENT SCHEDULES

(a)  The following documents are filed as part of this report or incorporated herein by reference.

1.     Financial Statements.
   (See Table of Contents to Item 8, above.)

2.     Supplemental Schedule.
   Financial Statement Schedules are omitted because they are inapplicable or the required information is otherwise included in the accompanying Financial Statements and the notes thereto.

3.     Exhibits.
 
SEC
     
Exhibit #
Reference#
Title of Document
 
Location
1
3
Articles of Restatement of the Articles of Incorporation
 
Incorporated by Reference (1)
2
3
Articles of Correction to the Restated Articles of Incorporation
 
Incorporated by Reference (1)
3
3
Bylaws
 
Incorporated by Reference (2)
4
4
Rights Agreement dated as of July 30, 2004, between Utah Medical Products, Inc., and Registrar and Transfer Company
 
Incorporated by Reference (3)
5
4
Designation of Rights, Privileges, and Preferences of Series "A" Preferred Stock
 
Incorporated by Reference (2)
6
10
Employment Agreement dated December 21, 1992 with Kevin L. Cornwell*
 
Incorporated by Reference (4)
7
10
Amendment, effective May 15, 1998, to Employment Agreement dated December 21, 1992 with Kevin L. Cornwell*
 
Incorporated by Reference (4)
8
10
Utah Medical Products, Inc., 2003 Employees' and Directors' Incentive Plan*
 
Incorporated by Reference (5)
9
10
Loan Agreement, signed 6-December-2005 between Utah Medical Products Limited and Bank of Ireland
 
Incorporated by Reference (6)
10
10
Amendment to Loan Agreement, dated 12-March-2008 between Utah Medical Products Limited and Bank of Ireland
 
This Filing
11
10
Guarantee and Indemnity, dated 13-June-2008, by Utah Medical Products, Inc. to Bank of Ireland
 
This Filing
12
10
Summary of Officer and Director Compensation
 
This Filing
13
21
Subsidiaries of Utah Medical Products, Inc.
 
Incorporated by Reference (7)
14
23
Consent of Jones Simkins, P.C., Company's independent auditors for the years ended December 31, 2008, December 31, 2007 and December 31, 2006
 
This Filing
15
31
Certification of CEO pursuant to Rule 13a-14(a) as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
This Filing
16
31
Certification of Principal Financial Officer pursuant to Rule 13a-14(a) as adopted pursuant to Section 302 of the Sarbanes-Oxley Act of 2002
 
This Filing
 
 
46

 
 
 
SEC
     
Exhibit #
Reference #
Title of Document
 
Location
17
32
Certification of CEO pursuant to 18 U.S.C. §1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
This Filing
18
32
Certification of Principal Financial Officer pursuant to 18 U.S.C. §1350, as Adopted Pursuant to Section 906 of the Sarbanes-Oxley Act of 2002
 
This Filing

* Management contract of compensatory plan or arrangement required to be filed pursuant to Item 14(c).

(1)
Incorporated by reference from the Company's annual report on form 10-K filed with the Commission for the year ended December 31, 2004.
   
(2)
Incorporated by reference from the Company's registration statement on form S-8 filed with the Commission effective February 10, 1995.
   
(3)
Incorporated by reference from the Company's report on form 8-K filed with the Commission on October 1, 2004.
   
(4)
Incorporated by reference from the Company's annual report on form 10-K filed with the Commission for the year ended December 31, 2003.
   
(5)
Incorporated by reference from the Company's annual report on form 10-K filed with the Commission for the year ended December 31, 2002.
   
(6)
Incorporated by reference from the Company's report on form 8-K filed with the Commission on December 12, 2005.
   
(7)
Incorporated by reference from the Company's annual report on form 10-K filed with the Commission for the year ended December 31, 1999.



 
47

 

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this amended report to be signed on its behalf by the undersigned this 13th day of January, 2010 .

UTAH MEDICAL PRODUCTS, INC.


By:
  /s/ Kevin L. Cornwell
 
Kevin L. Cornwell
 
Chief Executive Officer
   


Pursuant to the requirements of the Securities Exchange Act of 1934, this amended report has been signed below by the following persons on behalf of the registrant and in the capacities indicated on this 13th day of  January, 2010 .


By:
  /s/ James H. Beeson
 
James H. Beeson, Director
   
   
By:
  /s/ Kevin L. Cornwell
 
Kevin L. Cornwell, Chief Executive Officer & Director
   
   
By:
  /s/ Ernst G. Hoyer
 
Ernst G. Hoyer, Director
   
   
By:
  /s/ Barbara A. Payne
 
Barbara A. Payne, Director
   
   
By:
  /s/ Paul O. Richins
 
Paul O. Richins, Principal Financial and Accounting Officer & Director

 

48