Back to GetFilings.com
UNITED STATES SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
FORM 10-K
[X] Annual Report Under Section 13 or 15(d) of the Securities Exchange Act of
1934
For the fiscal year ended December 31, 2000
[_] Transition Report Under Section 13 or 15(d) of the Securities Exchange Act
of 1934
For the transition period from______________to ____________________.
Commission file number: 0-25620
-------
A.S.V., Inc.
-------------------
(Exact name of registrant as specified in its charter)
Minnesota 41-1459569
----------------------- ------------------
State or other jurisdiction of I.R.S. Employer
incorporation of organization Identification No.
840 Lily Lane, P.O. Box 5160, Grand Rapids, MN 55744 (218) 327-3434
- ---------------------------------------------------- ----------------
Address of principal executive offices Registrant's telephone number,
including area code
Securities registered under Section 12(b) of the Exchange Act:
None
----------------
Title of each class
Securities registered under Section 12(g) of the Exchange Act:
Common Stock, $.01 par value
----------------------------
Title of each class
Indicate by check mark whether the registrant (1) filed all reports
required to be filed by Section 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. [X] Yes [_] No
Indicate by check mark if disclosure of delinquent filers pursuant to Item
405 of Regulation S-K is not contained herein, and will not be contained, to the
best of the registrant's knowledge, in definitive proxy or information
statements incorporated by reference in Part III of this Form 10-K or any
amendment to this Form 10-K. [_]
Based on the closing sale price at March 15, 2001 of $11.00, the aggregate
market value of the registrant's Common Stock held by nonaffiliates was
$74,933,051.
As of March 15, 2001, 10,209,997 shares of the registrant's Common Stock
were issued and outstanding.
DOCUMENTS INCORPORATED BY REFERENCE:
------------------------------------
Portions of the registrant's Proxy Statement for its June 1, 2001 Annual
Meeting, which will be filed by April 30, 2001, are incorporated by reference in
Part III.
1
PART I
Item 1. Description of Business
General
A.S.V., Inc. was incorporated in Minnesota in July 1983 and its wholly-
owned subsidiary, A.S.V. Distribution, Inc., was incorporated in Minnesota in
January 1989. A.S.V., Inc. and A.S.V. Distribution, Inc. are collectively
referred to herein as "ASV" or the "Company."
ASV designs, manufactures and sells track-driven all-season vehicles. The
Company's two principal product lines, the Posi-Track(TM) product line and the
R-Series product line, use a rubber track suspension system that takes advantage
of the benefits of both traditional rubber wheels and steel tracks. Rubber track
vehicles provide the traction, stability and low ground pressure necessary for
operation on soft, wet, muddy, rough, boggy, slippery, snowy or hilly terrain,
but, unlike steel track vehicles, can be driven on groomed, landscaped and paved
surfaces without causing damage. The Company's products are versatile machines
used in the construction, agricultural, landscaping, trail grooming and
maintenance, vineyard, military, wildlife management and other markets.
The Company has the following models in its Posi-Track product line: the
MD-70, the 2800 series, the HD 4500 series and the 4810. The Company has one
model in its R-Series product line, the RC.30.
The Company has also produced two models of machines primarily for over-
the-snow applications, the Track Truck and the Posi-Track DX 4530.
Track Truck is a registered trademark, and Posi-Track, RC.30, Posi-Turn and
Snow Saver are trademarks, of ASV, Inc. This Annual Report also contains
trademarks of other companies.
In 1999, the Company closed on a strategic alliance with Caterpillar Inc.
("Caterpillar") whereby Caterpillar purchased, for an aggregate purchase price
of $18 million, one million newly issued shares of the Company's Common Stock
and a warrant to purchase 10,267,127 newly issued shares of the Company's Common
Stock. In connection with this transaction, the Company received, among other
items, access to Caterpillar's worldwide dealer network through which it can
distribute its products. In 2000, Caterpillar purchased an additional 500,000
newly issued shares of ASV Common Stock at $18 per share, increasing its
ownership in ASV to approximately 15%. The Company also amended its original
warrant issued to Caterpillar, reducing the number of shares of ASV common stock
available for purchase under the warrant by 500,000 shares.
Current Year Developments
New Product Line
In the third quarter of 2000, the Company began manufacturing the first
model in its R-Series product line, the RC.30 All Surface Loader. This machine
is significantly smaller than the Company's current models and is being marketed
to the landscape, rental and landowner markets. The RC.30 weighs approximately
3,000 pounds and has a smaller quick-attach mechanism for accepting attachments.
This product is being sold through multiple distribution channels on a
nonexclusive dealer territory basis.
Additional Agreements with Caterpillar
In October 2000, the Company entered into a Securities Purchase Agreement
in which Caterpillar purchased 500,000 newly issued shares of ASV Common Stock
at $18 per share, increasing its ownership in ASV to approximately 15%. The
Company also amended its original warrant issued to Caterpillar, reducing the
number of shares of ASV common stock available for purchase under the warrant by
500,000 shares.
The Company and Caterpillar also entered into an alliance agreement in
which they plan to jointly develop and manufacture a new product line of
Caterpillar rubber track skid steer loaders called Multi-Terrain Loaders, or
MTL's. The product line, which is expected to include five new models, will
feature Caterpillar's patented skid steer loader technology and ASV's patent-
pending Maximum Traction Support System(TM) rubber track undercarriage. The
machines
2
are expected to complement existing models in both ASV's and Caterpillar's
current product lines. They will be sold through the Caterpillar dealer network.
Alliance with Polaris Industries, Inc.
In January 2001, the Company entered into a licensing agreement that allows
Polaris Industries, Inc., (Polaris) to sell an ASV-built, rubber track, all-
surface utility loader similar to the Company's RC.30 All Surface Loader. The
agreement gives Polaris the right to market and sell the utility loader under
its own nameplate through its worldwide dealer network. Polaris will purchase
the machines, as well as parts and attachments, directly from ASV. The agreement
also provides the option at some future point for Polaris to manufacture the
machines under a royalty arrangement if volume exceeds ASV's competitive
capabilities.
Markets for the Company's Products
With the increased production and sales volume of the Company's Posi-Track
crawler/tractors (specifically the MD-70, the 2800 series, the HD 4500 series
and the 4810) over the last several years, and the introduction of the RC.30 All
Surface Loader, sales of the Company's original product, the Track Truck, and
its Posi-Track DX 4530 have declined. These models are sold primarily for over-
the-snow applications and have a much more limited market than the Company's
crawler/tractor models or RC.30. In 2000, sales of the Track Truck and the
Posi-Track DX 4530 accounted for less than 1.0% of the Company's net sales.
Therefore, unless specifically mentioned, the following discussion will pertain
only to the Posi-Track crawler/tractors and the RC.30 All Surface Loader.
Hereafter, the term Posi-Track will refer to the crawler/tractor models.
The Company believes its RC.30 and Posi-Tracks are very versatile and can
be used in a wide variety of applications. The following represents several of
the possible markets where the Company's products may be used.
Construction. The construction industry currently depends heavily on skid-
steer vehicles for a wide variety of functions. Skid-steers are small four-
wheeled vehicles that were originally designed and used primarily as loaders,
but in the last decade have become increasingly more popular for a variety of
functions and more versatile with the availability of attachments such as
backhoes, forklifts, breakers, planers, rakes and augers. Most skid-steer
attachments are designed to be used with an industry standard quick-attach
mechanism which allows attachments used by one manufacturer to be used on
vehicles manufactured by another.
The primary disadvantage of skid-steer vehicles is that they are wheeled
vehicles and are not designed for operation on wet, soft, slippery or rough
ground, which means that they are inherently limited as to when and where they
can function. Skid-steers often sit idle in the winter and spring or after rain
because the ground is not suitable for their operation. A wheeled skid-steer
exerts ten times or more ground pressure than a Posi-Track or RC.30 which makes
a skid-steer less suitable for operation on landscaped or groomed ground.
Recognizing the benefits of tracked vehicles, a few manufacturers have
created tracks that can be placed around a skid-steer's wheels. Add-on tracks
are generally steel; however, rubber add-on tracks are now available due to the
limitations imposed by steel tracks. Although rubber add-on tracks can decrease
a skid-steer's ground pressure somewhat, the overall design of a Posi-Track or
RC.30 gives it more versatility and less ground pressure than a skid-steer with
add-on tracks.
In addition to the tasks performed by skid-steers, Posi-Tracks are used for
construction jobs performed by small steel track dozers. A skid-steer's design
lacks the power, traction and stability necessary for moving dirt and other
materials efficiently. Therefore, dozers have remained single purpose machines
and, because of their steel tracks and significant ground pressure, cannot be
operated on soft, groomed, landscaped or paved surfaces.
Landscaping. Like the construction industry, the landscaping industry
depends heavily on small dozers and skid-steers with loaders, backhoes, rakes
and other attachments. Landscapers have also been limited by these machines on
soft, wet, muddy, hilly or rough terrain or on groomed or paved surfaces,
thereby affecting productivity. Skid-steers and dozers cause greater soil
compaction than a Posi-Track or RC.30, which is a concern for landscapers
because the more compact the soil, the more difficult it is for plants to grow.
The Posi-Track and RC.30 can also be adapted to perform special functions in the
landscaping industry. For example, the Company manufactures attachments for the
Posi-Track and RC.30 which are used for laying a specially cut continuous roll
of sod. The sod is held in front of the vehicle and unrolls as the vehicle
3
moves forward, laying the sod on the ground. The vehicle's rubber tracks then
move over the sod, gently setting it in place. This procedure allows sod to be
laid with significantly less manual labor and on places such as sides of hills
where traditional smaller sod sections could be washed away by excessive rain.
Agricultural. Posi-Tracks are used in the agricultural industry to perform
the functions of small tractors. Its three-point hitch and reversible seating
allow it to be used with pull-type attachments such as roto-tillers, plows,
disks and cultivators. The Posi-Track's hydraulic power take off shaft allows it
to be used for farming chores such as grinding and unloading feed. Its low
ground pressure and rubber tracks allow it to be used on wet, soft, muddy ground
that would not be possible with traditional wheeled tractors, thereby increasing
the number of productive days. In addition, Posi-Track's low ground pressure
reduces compaction of soil. Posi-Tracks are being used in several grape
vineyards in California's Napa Valley as a replacement to four-wheel drive
tractors.
Trail Grooming and Maintenance. The Posi-Track is used for maintaining
trails such as snowmobile, cross-country ski, biking and hiking trails. The
Posi-Track is used with a mower attachment to clear and maintain trails for
biking, hiking and other purposes.
Wildlife Management. Posi-Tracks are used in wildlife management by
Federal agencies and the departments of natural resources of a number of states.
They are used to mow trails for wildlife and to mow clearings so that grass,
clover and other vegetation needed for wildlife can grow. They are also used to
clear cattails and other unwanted vegetation from swamps to provide access for
feeding ducks and other waterfowl. Posi-Tracks have also been equipped for use
in the management of controlled burning or the maintenance of fire lines to
prevent the spread of forest fires and for access to remote sites for a variety
of other purposes.
Military Applications. The Posi-Track (model MD-70 only) is being equipped
with robotic and video equipment to enable remote operation of the machine at
distances up to three miles. Current applications for this type of Posi-Track
include detonation and removal of land mines, clearing unexploded munitions on
bomb ranges and clearing bomb ranges of overgrown vegetation. For these types of
applications, the Company is selling the Posi-Track MD-70 to an unrelated party
who equips it with the necessary robotics and video equipment to provide for the
remote operation.
The Company has been awarded a supply contract number for several of its
Posi-Track models under the General Service Administration which allows Federal
governmental agencies to purchase them without going through a competitive
bidding process.
Other. The versatility of the Posi-Track has allowed for their use in
areas where a typical skid-steer vehicle could not operate. A grain export
company is using Posi-Track's in the hold of grain vessels to level the grain
for proper weight distribution or before adding more cargo, eliminating many
hours of hand labor.
Products
The Company's principal products are contained in two primary product
lines, the Posi-Track product line and the R-Series product line. All products
under these two product lines utilize a rubber track suspension system that
takes advantage of the benefits of traditional rubber wheels and steel tracks,
without the disadvantages possessed by each. Wheeled vehicles have less
traction, are less stable than tracked vehicles and cannot operate on soft, wet,
slippery, rough or hilly terrain. Steel tracks damage the surfaces on which they
operate. Also, the significant ground pressure of both wheeled and steel track
vehicles creates compacted soil. The rubber tracks utilized provide the
traction, stability and mobility of tracked vehicles, but do not damage
surfaces. In addition, all machines produced have extremely low ground pressure
which means they will not cause significant soil compaction.
The Company began manufacturing the Track Truck in 1984. The current Track
Truck model is the HPT 2800 and is used primarily in over-the-snow applications.
The Company began manufacturing the Posi-Track Model MD-70 for sale in 1991. In
July 1997, the Company began selling the Posi-Track HD 4500 series, which is
larger than the MD-70 and has additional features not available on the current
model MD-70, most notably a maintenance-free suspension which eliminated all
periodic maintenance on the suspension parts. In October 1997, the Company
began selling the Posi-Track DX 4530, the largest of all the Posi-Track models
produced. The DX 4530 is used primarily in over-the-snow applications. The DX
4530 has features not found on either the MD-70 or HD 4500 models. In August
1998, the Company began selling the Posi-Track 2800 series. The 2800 series
integrated the size, weight and operating capabilities of the Company's Model
MD-70
4
Posi-Track with the maintenance-free undercarriage currently in use on the
Company's HD 4500 and DX 4530 models. In July 1999, the Company began
manufacturing the 4810, which incorporates a Caterpillar engine and other
Caterpillar components. The 4810 has essentially replaced the HD 4500 series,
although the Company still manufactures the HD4500 in limited quantities for
select markets. In July 2000, the Company began manufacturing the RC.30 All
Surface Loader. This machine is significantly smaller than the Company's current
model Posi-Tracks and is being marketed to the landscape, rental and landowner
markets.
The Company intends to begin distribution of product under its agreement
with Polaris in the first quarter of 2001. This product is similar to ASV's
RC.30 All Surface Loader but will carry the Polaris nameplate and be sold
through the Polaris dealer network.
The MTL's will be jointly manufactured with Caterpillar, and the Company
intends to begin manufacturing its portion in the second quarter of 2001.
The vast majority of the Company's future production is expected to be
devoted to the 4810, the RC.30 All Surface Loader and those products specified
in the Caterpillar and Polaris alliances. The Company may, from time to time,
build its other models on an as needed basis.
The rubber tracks used on the Company's products are made of molded rubber
reinforced with layers of nylon and Kevlar. The majority of the Company's Posi-
Track products and its RC.30 feature a maintenance-free suspension with no
grease fittings. The Company's products utilize diesel engines manufactured by
various engine manufacturers. The current model Posi-Tracks and its RC.30
utilize engines manufactured by Caterpillar and Isuzu.
Posi-Track Crawler/Tractor Models.
The Company believes its Posi-Tracks are ideal replacements to skid-steers,
small dozers and small tractors and can perform many of the jobs handled by
these vehicles without the disadvantages they possess. Their standard quick-
attach mechanism enables them to operate the attachments used by skid-steers.
They are also designed for use with a dozer attachment. In addition, their
three-point hitch attachment and reversible seating allow them to function as a
small tractor.
The Posi-Track's weight is distributed over its two tracks, which have a
ground surface of approximately 102 x 18 inches per track, which results in an
average ground pressure of approximately 2-3 pounds per square inch, compared to
approximately 35 pounds per square inch for a typical wheeled skid-steer
weighing approximately the same as a Posi-Track. The Posi-Track's low ground
pressure allows it to operate on wet, soft, slippery, rough and hilly terrain.
Conventional wheeled vehicles may not be able to operate or may be destructive
in these conditions. The Posi-Track's low ground pressure also reduces
compaction which decreases the need for frequent tilling and conditioning of the
soil.
Posi-Tracks are multi-purpose vehicles which the Company believes are
attractive to customers principally because of their:
. Size. Posi-Tracks equipped with a loader, weigh approximately 7,400 to
8,500 pounds, depending on model, and have an approximate ground
pressure of 3 pounds per square inch. The overall size of a Posi-Track
is comparable to a typical skid steer.
. Features. The Posi-Track's loader includes a quick-attach mechanism
which allows for use of a wide range of attachments, manufactured both
by the Company and others such as a bucket, forklift, rake, mower and
snowblower. Posi-Tracks can accept a category one or category two
three-point hitch, depending on model. A dozer blade and backhoe are
also available for all Posi-Tracks.
. Price. The current retail price of a Posi-Track ranges from
approximately $43,000 for a model 2800 with a loader, bucket and
quick-attach mechanism to approximately $55,000 for a 4810 with a
loader, bucket and quick-attach mechanism. Although the most common
skid-steer vehicles have a slightly lower base price, comparably
equipped skid-steers cost approximately the same as a Posi-Track 2800.
. Ease of Operation. Posi-Tracks feature a reversible driver's seat
which allows an operator to face either end of the vehicle for better
control. All Posi-Track models are maneuverable and can easily turn in
their own length.
5
In addition to the attachments already available on the market from other
manufacturers, the Company also manufactures and sells attachments for the Posi-
Track for special functions not performed by other competing vehicles. Because
skid-steers are not designed for performing dozer functions, dozers have
traditionally been separate, single-function vehicles. However, because of its
rubber track and design, the Posi-Track is able to perform dozer functions with
the dozer attachment manufactured and sold by the Company. The Company also
modifies a mower attachment for the Posi-Track and designs, manufactures and
sells other attachments for special purposes.
RC.30 All Surface Loader
The Company began sales of its RC.30 All Surface Loader in the third
quarter of 2000. The RC.30 is a smaller version of the Company's Posi-Track
machines. Weighing approximately 3,000 pounds and built on a rubber track
suspension similar to the Posi-Track, the RC.30 is being marketed towards the
landscape, rental and landowner markets.
The basic design of the RC.30 is similar to that of a Posi-Track with its
weight distributed over two tracks smaller than those found on a Posi-Track.
The RC.30 has tracks which have a ground surface of approximately 55 x 11 inches
per track, resulting in an average ground pressure of approximately 2-3 pounds
per square inch. This low ground pressure provides the RC.30 with the same
advantages in various operating environments as a Posi-Track.
The RC.30 is also a multi-purpose vehicle which the Company believes is
attractive to customers principally because of their:
. Size. The RC.30 occupies approximately the same size footprint as an
all-terrain vehicle, with a width of approximately 46 inches and a
length of approximately 91 inches without any attachment on the
loader. The width allows the RC.30 to fit between the fender wells of
a full-size pick-up truck. The size of the RC.30 allows it to maneuver
in compact areas, easily turning within its own length.
. Features. The RC.30's loader includes a quick-attach mechanism which
allows for use of a wide range of attachments, manufactured both for
the Company by others such as a bucket, forklift, rake, backhoe and
snowblower.
. Price. The current retail price of an RC.30 is approximately $22,500
with a loader, bucket and quick-attach mechanism. The Company believes
its current retail price makes the RC.30 very competitive against
similarly equipped skid-steers.
. Ease of Operation. The RC.30 is a ride-on machine equipped with pilot-
operated hydraulic controls. Gauges and switches are in the heads-up
position for easy view and reach. Safety features include full
ROPS/FOPS canopy, lap bar, seat belt and parking brake.
Over-the-Snow Models
The Company manufactures two additional models, the Track Truck and the DX
4530, which are primarily marketed towards over-the-snow applications, such as
snow trail grooming for snowmobile and ski trails. With the increased
popularity and production of the Company's Posi-Track crawler/tractor models and
RC.30, the production and sales of the over-the-snow models has greatly
decreased over the last several years. In 2000, sales related to over-the-snow
models accounted for less than 1.0% of the Company's net sales. The Company
anticipates it may manufacture these models in the future, but only on a build
to order basis.
Sales and Marketing
The Company sells its products through several distribution channels,
depending on product. The Posi-Track is primarily sold through Caterpillar
dealers in the United States, Canada and Australia as well as a limited number
of independent equipment dealers in the United States. As of March 1, 2001,
54Caterpillar dealers and 12 independent dealers representing approximately 350
locations in the United States, Canada and Australia sell and service the
Company's Posi-Track machines.
The RC.30 is primarily sold through independent equipment dealers in the
United States and Canada as well as a
6
limited number of Caterpillar dealers. As of March 1, 2001, 26 independent
dealers and 11 Caterpillar dealers representing approximately 50 locations in
the United States and Canada sell and service the RC.30. The Company anticipates
it will expand to approximately 100 total RC.30 dealers by the end of 2001.
The MTL products, a Caterpillar product, will be available only through
Caterpillar dealers. For 2001, 16 North American Caterpillar dealers are
expected to carry the MTL product line. In 2002, it is anticipated all 69
Caterpillar dealers in North America will be able to carry the MTL product line.
In 2003, it is anticipated the MTL product line will be available to Caterpillar
dealers on a worldwide basis.
The Polaris version of the RC.30 will be available only through Polaris
dealers, with the distribution of this product handled by Polaris. Polaris has
a North American dealer network of approximately 2,000 dealers, along with 52
international distributors in 125 countries. Polaris expects approximately 350
of its North American dealers may carry this product over the next 12 months.
The construction, agricultural and landscape equipment industries, in which
the Posi-Track and RC.30 models compete, have historically been cyclical. Sales
of construction, agricultural and landscape equipment are generally affected by
the level of activity in the construction and agricultural industries as well as
farm production and demand, weather conditions, interest rates and construction
levels (especially housing starts). In addition, the demand for the Company's
products may be affected by the seasonal nature of the activities in which they
are used. Sales of the Posi-Track have generally been greater in the spring and
summer. The Company anticipates sales of the RC.30 will follow a pattern
similar to the Posi-Track.
For the years 2000 and 1999, no customer accounted for over 10% of the
Company's net sales. During 1998, approximately 21% of the Company's net sales
were made to one unaffiliated customer.
As of March 15, 2001, the Company had orders for approximately $8.1 million
of its products. As of March 15, 2000, the Company had orders for approximately
$3.1 million of its products.
The Company generally does not offer financing on its vehicles, but has
arrangements with several finance companies to finance the sale of the Company's
vehicles to its dealers and end purchasers. The Company had an agreement with
John Deere Credit whereby John Deere Credit will provide floor plan financing to
certain of the Company's Posi-Track dealers. This agreement was terminated by
John Deere Credit in 2000. For 2000, less than 1% of the Company's sales were
financed through John Deere Credit. For 1999 and 1998, approximately 2% and 8%,
respectively, of the Company's sales were financed through John Deere Credit.
The Company offers extended payment terms on the sale of its products to
its dealers, generally not exceeding 180 days. In December 2000, the Company
made a sale to one customer totaling approximately $4 million. Due to physical
space limitations at the customer's facilities, delivery of the product is being
made during the months of January through April 2001. The Company has agreed to
provide interest free terms for these products until July 1, 2001. Any product
sold by the customer prior to July 1, 2001 must be paid by the tenth day of the
month following the month of sale. For any product not paid by July 1, 2001,
the Company has agreed to provide floor plan financing at the rate of 10% per
annum, such interest to be payable monthly. All remaining unpaid amounts and
any accrued interest are due and payable December 31, 2001.
Affiliation with Caterpillar
1998-1999 Agreements
On October 14, 1998, ASV entered into a Securities Purchase Agreement (the
"Purchase Agreement") with Caterpillar Inc. ("Caterpillar"). This Purchase
Agreement was approved by the Company's shareholders on January 28, 1999 and
closed January 29, 1999. Pursuant to the Purchase Agreement, Caterpillar
acquired, for an aggregate purchase price of $18,000,000, one million newly
issued shares of the Company's Common Stock and a warrant to purchase an
additional 10,267,127 newly issued shares of the Company's Common Stock at a
price of $21.00 per share. The Purchase Agreement provided that, upon closing,
the Company's Board of Directors would be increased from eight to ten members
and the Company's Board of Directors appointed two members designated by
Caterpillar. In 2000, in connection with the purchase of an additional 500,000
newly-issued shares of ASV's Common stock, the warrant shares were reduced by
500,000 shares. See "2000 Agreements" below.
7
In connection with entering into the Purchase Agreement, the Company and
Caterpillar have entered into several ancillary agreements. First, the Company
and Caterpillar have entered into a commercial alliance agreement (the
"Commercial Alliance Agreement") pursuant to which Caterpillar is providing the
Company access to its worldwide dealer network and has made various management,
financial and engineering resources available to the Company. In addition,
Caterpillar and the Company have entered into various other agreements pursuant
to which Caterpillar and the Company will supply each other with certain
components, Caterpillar will agree to allow the Company to use certain of its
trademarks and trade dress in the event certain conditions are met and
Caterpillar and the Company will agree to share certain technologies, all at
certain costs. Material terms of these ancillary agreements are described
below.
The Commercial Alliance Agreement. The Commercial Alliance Agreement
provides that the Company and Caterpillar will enter into certain agreements,
each of which is discussed below.
Marketing Agreement. The Marketing Agreement requires Caterpillar to
provide the Company with access to its worldwide distribution network, in
part, by promoting the sale of the Company's products to Caterpillar's
dealers. Caterpillar will first promote ASV's products in North America and
gradually extend such promotion throughout the world consistent with a
joint marketing plan to be developed by the Company and Caterpillar. In
addition, under the Marketing Agreement, Caterpillar intends to handle
orders for the Company's products and administer its warranties. In
consideration for Caterpillar's services under the Marketing Agreement, ASV
will pay to Caterpillar a commission equal to 5% of the dealer net price
for complete machines (currently the 4810 model only) and 3% for
replacement parts and Company-branded attachments sold to Caterpillar
dealers plus the costs of certain services provided by Caterpillar. The
Marketing Agreement was entered into between Caterpillar and the Company on
January 29, 1999.
Trademark and Trade Dress License Agreement. The Marketing Agreement
provides that the Company and Caterpillar enter into a Trademark and Trade
Dress License Agreement (the "License Agreement") at such time as the
Company's products have been evaluated by Caterpillar and have been found
to meet Caterpillar's quality and safety standards in accordance with
Caterpillar's established testing and validation procedures. The License
Agreement will provide, in part, that Caterpillar will grant to the Company
the non-exclusive, non-transferable right and license to use certain
trademarks of Caterpillar on the Company's products for a fee equal to a
percentage of the dealer net price for products sold to dealers with such
trademarks. The term of the License Agreement will be five years from the
date of the signing of the License Agreement, unless earlier terminated by
mutual consent of the Company and Caterpillar. Although no time frame for
the evaluation of the Company's products has been agreed to, the Company
anticipates that such process may take from two to four years, or longer.
The Company and Caterpillar have currently chosen to focus on joint product
offerings with the Caterpillar trademark (i.e. the MTL product line) rather
than pursue this portion of the Marketing Agreement at the current time.
Management Services Agreement. Under the Management Services Agreement,
Caterpillar will make available to the Company general management support
in connection with the day-to-day operation of its business, commercial
development and marketing research services, financial planning services,
such other administrative services as Caterpillar and the Company may
subsequently agree to in writing, and manufacturing and engineering
services. In consideration for Caterpillar's obligations under the
Management Services Agreement, the Company will pay Caterpillar a fee equal
to Caterpillar's fully-loaded cost, as defined in the Management Services
Agreement, plus an administrative surcharge (or such other fee as the
parties may agree upon). The Management Services Agreement remains in
effect indefinitely until otherwise terminated by the parties and was
entered into between Caterpillar and the Company on January 29, 1999.
Other Agreements. The Commercial Alliance Agreement also provides that the
Company and Caterpillar enter into several additional agreements, the terms of
which, including the fees and costs to be paid thereunder, may be negotiated in
the future as the need warrants. These agreements are as follows:
Service Agreements. The parties have agreed to enter into Service
Agreements pursuant to which Caterpillar will offer to ASV financial
services, logistics services and services to promote ASV's products to
governmental bodies, either through Caterpillar or a wholly owned
subsidiary of Caterpillar, and ASV will agree to use such services if the
prices to be negotiated for such services are competitive from a total
value point of view. Caterpillar and the Company have chosen to operate
under this portion of the Commercial Alliance Agreement without a formal
Service Agreement.
8
Supply Agreement (Caterpillar to ASV). The parties have agreed to enter
into a Supply Agreement (Caterpillar to ASV) pursuant to which Caterpillar
will offer to supply Caterpillar components to ASV for incorporation into
ASV's products, including, without limitation, diesel engines, and ASV will
agree to purchase such components from Caterpillar if the terms upon which
such components are offered for sale to ASV are competitive from a total
value point of view. Caterpillar and the Company have chosen to operate
under this portion of the Commercial Alliance Agreement without a formal
Supply (Caterpillar to ASV) Agreement
Supply Agreement (ASV to Caterpillar). The parties have agreed to enter
into a Supply Agreement (ASV to Caterpillar) pursuant to which ASV will
offer to supply ASV components to Caterpillar for incorporation into
Caterpillar's products that do not compete with ASV's products and ASV will
further agree to license to Caterpillar the intellectual property rights
necessary for Caterpillar to manufacture such components in the event it
becomes economically impractical for ASV to supply such components. Events
giving the need for a formal Supply Agreement (ASV to Caterpillar) have not
yet occurred, therefore no Supply Agreement (ASV to Caterpillar) has been
entered into.
Technology License Agreement (ASV to Caterpillar). The parties have agreed
to enter into a Technology License Agreement (ASV to Caterpillar) pursuant
to which ASV will offer to license to Caterpillar, on an exclusive (except
as to ASV) and royalty bearing basis, the right to use ASV's proprietary
patents and know-how relating to all-terrain rubber track vehicles in the
design, manufacture, use and sale of Caterpillar's products that do not
compete directly with ASV's products (subject to ASV's right to supply
components to Caterpillar pursuant to the Supply Agreement (ASV to
Caterpillar) described above). Events giving the need for a formal
Technology License Agreement have not yet occurred, therefore no Technology
License Agreement has been entered into.
Joint Venture Agreement. The parties have agreed to enter into a Joint
Venture Agreement pursuant to which ASV and Caterpillar will establish a
50-50 joint venture company to design and develop a line of agricultural
tractors utilizing key aspects of the parties' respective technology and
know-how. Caterpillar and the Company have had preliminary discussions
regarding the Joint Venture, but have elected to concentrate on the MTL
product line before pursuing further a formal Joint Venture Agreement.
2000 Agreements
In October 2000, the Company entered into another Securities Purchase
Agreement with Caterpillar in which Caterpillar purchased 500,000 newly issued
shares of ASV Common Stock at $18 per share. The Company also amended its
original warrant issued to Caterpillar reducing the number of shares of ASV
common stock available for purchase under the original warrant by 500,000
shares. The amended warrant with Caterpillar provides for the purchase
of9,767,127 newly issued shares of the Company's Common Stock at a price of
$21.00 per share. The amended warrant is exercisable at any time until January
29, 2009, except that it may expire with respect to a portion of the shares in
the event the Company meets certain revenue levels and certain other conditions
are met.
Also in October 2000, the Company and Caterpillar entered into an alliance
agreement under which they plan to jointly develop and manufacture a new product
line of Caterpillar rubber track skid steer loaders called Multi-Terrain Loaders
(MTL's). The product line, which is expected to include five new models, will
feature Caterpillar's patented skid steer loader technology and ASV's patent-
pending Maximum Traction Support System(TM) rubber track undercarriage. The
machines will complement existing models in both ASV's and Caterpillar's current
product lines. They will be sold through the Caterpillar dealer network. The
MTL's are not a commissionable product under the Commercial Alliance Agreement.
As of March 15, 2001, Caterpillar owns 14.7% of the Company's outstanding
Common Stock (12.4% assuming the exercise of all outstanding options and
warrants) and has the right to own up to 51.6% of the Company's outstanding
Common Stock (assuming the exercise of all outstanding options and warrants)
upon exercise of the warrant.
Competition
The markets in which the Posi-Track competes are generally comprised of
small to medium sized tractor-type vehicles including skid-steers. The market
is dominated by large corporations producing models with substantial name
recognition, including Case, which manufactures the Uniloader skid-steer,
Ingersoll Rand which manufactures the Bobcat, Gehl, Deere & Co. and Caterpillar
Inc. The competitors primarily produce wheeled or steel track vehicles in the
markets in
9
which the Posi-Track competes. Caterpillar, John Deere and Case sell rubber
track vehicles in the medium to large sized tractor market. Ingersoll Rand
manufactures a rubber track skid steer which would be considered comparable in
size to the Company's 2800 series Posi-Track.
The markets in which the RC.30 competes are also generally comprised of
vehicles manufactured by large corporations producing models with substantial
name recognition, including Toro, which manufactures the Dingo, as well as those
companies listed above that manufacture skid-steer products.
The Company expects its products to compete in the market based on, among
other things: adaptability, versatility, performance, convenience of operation,
features, size, brand loyalty, price and reputation. Some of the Company's
competitors possess significantly greater resources than the Company, as well as
established reputations within the industry. There is no assurance that a
competitor with greater capital resources will not enter and exploit the
Company's markets to the Company's detriment. The Company believes the
introduction of additional competitors could enhance market acceptance of rubber
track vehicles.
Warranty
The Company provides a limited warranty to purchasers of its products. The
warranty covers defects in materials and workmanship for periods ranging from
six months to one year from the delivery date to the first end user, depending
on if the machine is placed into a rental fleet. The rubber tracks used on the
Company's products carry a pro-rated warranty up to 2,000 hours of usage.
Components which are not manufactured by the Company are subject only to the
warranty of the manufacturer of the component and may be greater in length than
the limited warranty provided by the Company.
The Company offers an extended warranty through an unaffiliated company.
This unaffiliated company would be responsible for administering and paying all
warranty claims under this extended warranty program.
Manufacturing and Suppliers
The Company manufactures and assembles its products at its facility in
Grand Rapids, Minnesota. See "Item 2. Description of Property." The majority
of the component parts are purchased from outside vendors. Certain parts, such
as engines and transmissions, are standard "off-the-shelf" parts purchased by
the Company and incorporated into its vehicles. Others, such as the rubber
track, undercarriage components and loader, are manufactured specifically for
the Company. The remaining parts, such as the Posi-Track frame, are
manufactured on site for incorporation into the vehicles. In order to help
reduce production costs, the Company periodically reviews those parts that may
be more cost-effective to manufacture in-house.
The Company owns the tooling used by outside vendors for manufacturing
customized parts. While current vendors are meeting the Company's quality and
performance expectations, the Company believes alternative contract
manufacturers are available should the necessity arise. However, shortages of
parts or the need to change vendors could result in production delays or
reductions in product shipments that could adversely affect the Company's
business. The Company believes that a change in suppliers for component parts
could occur without material disruption of the Company's business.
Intellectual Property Rights
In 1986, a patent was issued to the Company with respect to the Posi-Turn
power steering system. The steering system was invented by Gary Lemke,
President of the Company, and his rights with respect to the invention were
assigned by him to the Company. In connection with the assignment, the Company
did not pay any compensation to Mr. Lemke, but agreed that in the event the
Company licenses any of its rights under the patent to others, Mr. Lemke would
receive 25% of any royalties under such license. This royalty agreement was
terminated in January 1999, with no consideration paid to Mr. Lemke.
In 1999, the Company filed patent application with the U.S. Patent Office
pertaining to its undercarriage and drive sprocket mechanism. There can be no
guarantee that a patent will be granted with respect to this application.
The Company has registered the trademark Track Truck(R) with the U.S.
Patent and Trademark Office and claims common law trademark rights in the names
Posi-Track(TM), Posi-Turn(TM) and Snow Saver(TM). Despite these protections, it
may
10
be possible for competitors or users to copy aspects of the Company's products.
The Company believes that patent and trademark protection is less
significant to its competitive position than the knowledge, ability and
experience of the Company's personnel, product enhancements, new product
development and the ongoing reputation of the Company.
Research and Development
During the years ended December 31, 2000, 1999 and 1998, the Company spent
approximately $679,000, $531,000 and $319,000, respectively, on research and
development. The Company's research and development expenses have been incurred
in connection with development of new models, enhancements to existing products
and additional products to be offered through its alliances with other
Caterpillar and Polaris.
The Company anticipates research and development expenses will increase
substantially in 2001 as it continues to develop the Multi-Terrain Loaders with
Caterpillar as well as extensions of its own product line. For 2001, the
Company anticipates it may spend approximately $2.5 million on research and
development. The Company believes its anticipated expenditure for research and
development in 2002 will be less than the expected level for 2001.
Insurance
The Company maintains product liability insurance as well as a commercial
umbrella insurance policy in amounts the Company believes are adequate. The
Company also maintains key-person life insurance in the amount of $1,000,000 on
the life of Mr. Lemke.
Employees
As of March 15, 2001, the Company had 110 employees, two of whom are part-
time. The Company's employees include 3 in management, 20 in administration, 13
in sales and marketing and 75 in manufacturing, engineering and research and
development. The Company believes its relations with its employees are good.
None of the Company's employees is represented by a labor union. The Company
also reimburses Caterpillar for the salary related costs of two Caterpillar
employees that work at the Company's Grand Rapids facility.
Item 2. Description of Property
The Company's manufacturing and office facilities are located in Grand
Rapids, Minnesota. These facilities consist of approximately 95,000 square feet
of production space and approximately 10,000 square feet of office space. The
facilities are leased under a 20-year lease from the Grand Rapids Economic
Development Authority. The lease agreement provides for monthly rental payments
to January 2018, with a balloon payment of approximately $756,000 in January
2003. The Grand Rapids facility has been the Company's primary production and
office facility since the original 40,000 square foot facility was first
occupied by the Company in May 1995. The facility was expanded to its present
size in 1997. The Company has an option to purchase the facility at any time at
the present value of the remaining lease payments plus the current purchase
price of the land on which the facility was constructed. The purchase price of
the land is currently $162,500, but can be reduced or forgiven over a remaining
period of six years if certain minimum employment levels are met and maintained
during the applicable year.
The Company also owns a parcel of land consisting of 63 acres and six
buildings with a total of 47,000 square feet, which it uses for its research and
development facility and additional warehousing.
The Company believes that its properties are adequately covered by
insurance.
Item 3. Legal Proceedings
ASV is a party to certain claims arising in the ordinary course of
business. In the opinion of management, the outcome of such claims will not
materially affect ASV's current or future financial position or results of
operation.
Item 4. Submission of Matters to a Vote of Security Holders
11
There were no matters submitted to a vote of security holders during the
fourth quarter of the fiscal year covered by this report.
PART II
Item 5. Market for Registrant's Common Equity and Related Stockholder Matters
Market Information
The Company's common stock trades on the Nasdaq Stock Market(R) under the
ticker symbol ASVI. The following represents the high and low closing stock
price for the periods indicated:
Year Ended December 31, 2000 High Low
---------------------------- ---- ---
First Quarter $18.75 $12.75
Second Quarter 15.06 11.00
Third Quarter 16.00 12.38
Fourth Quarter 15.38 6.38
Year Ended December 31, 1999 High Low
---------------------------- ---- ---
First Quarter $18.50 $15.00
Second Quarter 23.88 15.25
Third Quarter 23.00 14.37
Fourth Quarter 16.69 12.38
The above figures reflect inter-dealer prices, without retail mark-up,
mark-down or commissions, and may not represent actual transactions.
Holders
As of March 15, 2001, the Company had approximately 261 holders of record
of its Common Stock (not including beneficial holders). The Company believes it
has approximately 4,000 beneficial holders of its Common Stock.
Dividends
The Company has never declared or paid a cash dividend on its Common Stock.
The Company currently intends to retain earnings for use in the operation and
expansion of its business and therefore does not anticipate paying any dividends
in the foreseeable future.
Changes in Securities and Use of Proceeds
On October 31, 2000, the Company sold 500,000 newly-issued shares of the
Company's Common Stock to Caterpillar, in a cash transaction for $9,000,000. The
Common Stock was sold pursuant to an exemption from registration under Rule 506
of Regulation D of the Securities Act of 1933, as amended. There were no
underwriting discounts or commissions incurred for the sale of the Common Stock.
The Company also amended its original warrant issued to Caterpillar reducing the
number of shares of ASV Common Stock available for purchase under the warrant by
500,000 shares. The Warrant is exercisable at any time until January 29, 2009,
except that it may expire with respect to a portion of the shares in the event
the Company meets certain revenue levels and certain other conditions are met.
Item 6. Selected Financial Data
(Dollar amounts in thousands, Year ended December 31,
except per share data) 2000 1999 1998 1997 1996
- -----------------------------------------------------------------------------------------------
Net Sales................................. $43,860 $36,168 $39,019 $24,316 $12,266
Net Earnings.............................. 1,451 1,412 3,366 2,324 922
Net Earnings Per Share-Diluted............ .15 .14 .40 .28 .12
Total Assets.............................. 55,006 48,650 29,533 19,215 13,410
12
Long-Term Liabilities..................... 2,117 2,197 2,464 7,021 5,697
Shareholders' Equity...................... 49,763 39,096 19,515 9,957 6,287
Item 7. Management's Discussion and Analysis of Financial Condition and Results
of Operations
Results of Operations
The following table sets forth, for the periods indicated, certain
Statements of Earnings data as a percentage of net sales:
Year Ended December 31,
-----------------------
2000 1999 1998
----- ----- -----
Net sales.................................. 100.0% 100.0% 100.0%
Cost of goods sold......................... 79.3 76.7 75.6
Gross profit............................... 20.7 23.3 24.4
Selling, general & administrative expense.. 14.2 15.7 8.9
Operating income........................... 5.0 6.2 14.7
Interest expense........................... 0.6 0.8 1.5
Net earnings............................... 3.3 3.9 8.6
Net Sales. Net sales for the year ended December 31, 2000 increased 21% to
approximately $43,860,000 compared with approximately $36,168,000 in 1999. This
increase is the result of several offsetting factors. First, sales of the
Company's model 4810 Posi-Track increased significantly as 2000 was the first
full year of production for this product. This product was available for less
than two quarters in 1999. Second, the Company introduced a new product in the
third quarter of 2000, the RC.30 All Surface Loader. The Company sold nearly all
its 2000 production of this model. Third, sales of used equipment increased in
2000 due to increased marketing efforts, including the opening of a retail store
in Grand Rapids, Minnesota in the second quarter of 2000. Lastly, offsetting
these factors was a decrease in sales relating to Posi-Track machines sold under
military contracts.
Net sales for the year ended December 31, 1999 decreased 7% to
approximately $36,168,000 compared with $39,019,000 in 1998. This decrease is
the result of several offsetting factors. First, the Company closed the
Transaction with Caterpillar in January 1999. The Company spent much of 1999
transitioning from its mostly independent dealer network to the Caterpillar
dealer network. Based on the success the Company had selling to Caterpillar
dealers in prior years, it was felt the transition to additional Caterpillar
dealers would be a relatively simple process. However, the degree to which these
additional Caterpillar dealers embraced new products, such as ASV's Posi-Track,
varied greatly. This required increased training and market development activity
by both the Company and the dealers to get the necessary marketing programs and
other support in place. During this time period, sales decreased. Second, in
1999, the Company introduced a new model Posi-Track, the 4810, that incorporated
many Caterpillar components. The initial production of the 4810 was later than
anticipated due to delays encountered during the initial production process,
leading to decreased sales during primarily the third quarter of 1999.
Offsetting these two factors was an increase in sales of approximately $2.3
million relating to Posi-Track machines sold under military contracts.
Gross Profit. Gross profit for the year ended December 31, 2000 increased
8% to approximately $9,065,000 compared with approximately $8,429,000 for 1999.
The increase is a result of increased net sales as discussed above offset in
part by a decrease in the Company's gross profit percentage from 23.3% in 1999
to 20.7% in 2000. The decrease in gross profit percentage is due to several
factors. First, sales of the Company's model 4810 Posi-Track, its highest gross
profit product, decreased significantly during the second half of the year, due
in part to a nationwide slowdown in construction equipment spending. Second, the
Company experienced inefficiencies during its initial start up of production of
its RC.30 All Surface Loader during the third quarter of 2000. Third, the
Company offered discounts on certain of its models to lower its inventory of
finished goods. Finally, the Company had increased sales of lower margin used
equipment in 2000 compared with 1999 as discussed above.
For the year ended December 31, 1999, gross profit decreased 12% to
approximately $8,429,000 compared with approximately $9,531,000 for 1998. This
decrease is a result of decreased sales in 1999 as discussed above and a
decrease in the Company's gross profit percentage from 24.4% in 1998 to 23.3% in
1999. The decreased gross profit percentage is due to several factors. First, as
discussed above, the Company experienced delays resulting in production
inefficiencies during its initial start up of production for the 4810 during the
third quarter of 1999. Second, the military contract discussed
13
above had a significantly lower gross profit percentage than the Company's
typical sales to its dealers. This was due to the high subcontract costs on this
military contract. Also, the Company experienced increased warranty costs as a
percentage of net sales, mainly from earlier model machines, which were not
fully recovered from its vendors.
Selling, General and Administrative Expenses. For the twelve months ended
December 31, 2000, selling, general and administrative expenses increased to
approximately $6,211,000 from approximately $5,671,000 in 1999. As a percentage
of net sales, these expenses decreased from 15.7% in 1999 to 14.2% in 2000. The
increased level of expenses was due primarily to two factors. First, the Company
had increased marketing expenses in 2000 consisting of additional dealer support
programs and a full year of costs for field service representatives hired during
the fourth quarter of 1999. Also, the Company paid a greater commission to
Caterpillar in 2000 due to increased sales to Caterpillar dealers and a full
twelve months of commissionable sales in 2000 compared with eleven months in
1999. The decrease in selling, general and administrative expenses as a
percentage of net sales was due to sales increasing at a faster rate than
expenses.
Selling, general and administrative expenses increased from approximately
$3,480,000 in 1998 to $5,671,000 in 1999. As a percentage of net sales, these
expenses increased from 8.9% of net sales in 1998 to 15.7% of net sales in 1999.
The increased level of expenses was due to several factors. First, the Company
began paying a commission to Caterpillar for sales to its dealers in 1999, which
accounted for approximately 42% of the increase. Second, the Company increased
its marketing efforts to assist in the transition of selling to Caterpillar
dealers. These marketing efforts included increased start up, training and
market development costs, as well as additional sales and support personnel
hired to service the dealers added in 1999. In addition, the Company integrated
its computer system with Caterpillar's to allow Caterpillar dealers to place
orders for whole machines and parts and process warranty claims in a similar
fashion as they do with Caterpillar. The increased expenses combined with the
decreased sales caused an increase in selling, general and administrative
expenses when expressed as a percentage of net sales.
Research and Development. For the year ended December 31, 2000, research
and development expenses increased to approximately $679,000 compared with
approximately $531,000 in 1999. The increase was due primarily to the joint
development of the first two of five expected models of Multi-Terrain Loaders
with Caterpillar and introduction of the Company's RC.30 All Surface Loader
product.
Research and development expenses for the year ended December 31,1999
increased approximately $212,000 to $531,000, compared with approximately
$319,000 for 1998. The increase is due primarily to the introduction of the 4810
model Posi-Track, continued work on the Company's RC.30 All Surface Loader
product and enhancements to existing Posi-Track models.
The company anticipates research and development expenses will increase
substantially in 2001 as it continues the development of the Multi-Terrain
Loaders with Caterpillar as well as extensions of the ASV product line. For
2001, the Company anticipates it may spend approximately $2.5 million on
research and development. The Company believes its anticipated expenditure for
research and development in 2002 will be less than the expected level for 2001.
Interest Expense. Interest expense was approximately $267,000 in 2000,
compared with approximately $306,000 in 1999 and $576,000 in 1998. The decrease
in 2000 was due to decreased line of credit usage. This was a result of
increased cash flow, primarily from the proceeds received from the sale of
common stock to Caterpillar in the fourth quarter of 2000. The decrease in 1999
was the combination of two offsetting factors. Interest expense decreased in
1999 as the Company's convertible debentures were exchanged for common stock in
1998. Offsetting this decrease was an increase in borrowings under the Company's
line of credit during 1999.
Net Earnings. Net earnings for the twelve months ended December 31, 2000
were approximately $1,451,000 compared with approximately $1,412,000 for 1999.
This increase was due to increased sales, offset in part by a lower gross profit
percentage and increased operating expenses. In addition, the Company's
effective income tax rate decreased in 2000 due to greater research and
development tax credits.
For the year ended December 31, 1999, net earnings decreased to
approximately $1,412,000, compared with approximately $3,366,000 in 1998. This
decrease was due to decreased sales with a lower gross profit and increased
operating expenses, offset in part by lower interest expense.
Liquidity and Capital Resources
14
In October 2000, the Company completed a Securities Purchase Agreement in
which Caterpillar purchased 500,000 newly issued shares of ASV Common Stock at
$18 per share increasing its ownership in ASV to approximately 15%. The Company
also amended its original warrant issued to Caterpillar reducing the number of
shares of ASV common stock available for purchase under the warrant by 500,000
shares.
As of December 31, 2000, the Company had working capital of approximately
$47,224,000, an increase of approximately $10,727,000 from 1999. The main reason
for this increase was the Company's sale of shares of its Common Stock to
Caterpillar in October 2000. Other items affecting working capital include an
increase of approximately $1,897,000 in accounts receivable due to increased
sales and greater use of extended terms, generally not exceeding 180 days, on
the sale of the Company's products. The Company reduced its inventory levels by
approximately $4,326,000 in 2000 by reducing its finished goods inventory and
decreasing its level of raw materials on hand. In addition, the Company paid off
its entire line of credit balance during 2000 from funds generated from
operations.
In December 2000, the Company made a sale to one customer totaling
approximately $4 million. Due to physical space limitations at the customer's
facilities, delivery of the product is being made during the months of January
through April 2001. The Company has agreed to provide interest-free terms for
these products until July 1, 2001. Any product sold by the customer prior to
July 1, 2001 must be paid by the tenth day of the month following the month of
sale. For any product not paid by July 1, 2001, the Company has agreed to
provide floor plan financing at the rate of 10% per annum, such interest to be
payable monthly. All remaining unpaid amounts and any accrued interest are due
and payable December 31, 2001. The Company has followed the requirements for
revenue recognition as set forth in Staff Accounting Bulletin No. 101, "Revenue
Recognition in Financial Statements" for this transaction.
At December 31, 1999, the Company's working capital increased $19,082,000
to approximately $36,497,000. The primary reason for the increase was the
proceeds from the Company's sale of shares of its Common Stock and a warrantto
Caterpillar, which resulted in an immediate increase in working capital of $18
million. The Company utilized the proceeds from this transaction initially to
pay off advances under its line of credit and to fund current operations.
Inventory levels increased 73% compared with December 31, 1998 due to several
reasons. During the transition to Caterpillar dealers, the Company chose not to
reduce its production levels, but instead, increased its finished goods,
primarily its 2800 series Posi-Tracks. Other reasons for the inventory increase
include the general increase in inventory needed to begin production of the new
4810 model Posi-Track, the long lead times to purchase certain inventory items,
and the need to inventory service parts for older model machines that are in the
field. In addition, as the Company transitioned from independent dealers to
Caterpillar dealers, the Company chose to repurchase the inventory held by the
independent dealers. To the extent possible, this inventory was transferred to
new Caterpillar dealers. Any inventory not transferred was brought to the
Company's facilities and accounted for the majority of the $3.4 million increase
in used equipment held for resale. Current liabilities decreased slightly from
1998, with the Company's line of credit borrowings increasing to fund current
operations and accounts payable decreasing as the Company reduced its purchasing
volume in the fourth quarter of 1999. Accrued commission increased in 1999 due
to the commissions payable under the Commercial Alliance Agreement with
Caterpillar.
In October 2000, the Company and Caterpillar entered into an alliance
agreement in which they plan to jointly develop and manufacture a new product
line of Caterpillar rubber track skid steer loaders called Multi-Terrain
Loaders. The product line, which is expected to include five new models, will
feature Caterpillar's patented skid steer loader technology and ASV's patent-
pending Maximum Traction Support System(TM) rubber track undercarriage. The
machines are expected to complement existing models in both ASV's and
Caterpillar's current product lines. They will be sold through the Caterpillar
dealer network.
Under the terms of this alliance agreement, ASV intends to use a portion of
the stock sale proceeds to fund development of the new models. The first two
models are expected to be introduced to a limited number of North American
Caterpillar dealers in the second quarter of 2001. The new machines will be
assembled in Sanford, N.C., at Caterpillar's skid steer loader facility. The
undercarriages will be manufactured at ASV headquarters in Grand Rapids,
Minnesota.
The Company will recognize as sales its cost for the undercarriage, plus a
portion of the gross profit that Caterpillar will recognize upon sale of the MTL
to Caterpillar dealers, when the Company ships undercarriages to Caterpillar.
The MTL's are not a commissionable product under the Commercial Alliance
Agreement.
In January 2001, the Company entered into a licensing agreement that allows
Polaris to sell an ASV-built, rubber track, all-surface utility loader similar
to the Company's RC.30 All Surface Loader. The agreement gives Polaris the
right to market and sell the utility loader under its own nameplate through its
worldwide dealer network. Polaris will purchase the
15
machines, as well as parts and attachments, directly from ASV. The agreement
also provides the option at some future point for Polaris to manufacture the
machines under a royalty arrangement if volume exceeds ASV's competitive
capabilities.
The Company will sell the Polaris branded machine, as well as parts and
accessories, to Polaris on a cost plus basis. The gross profit on these
machines will be less than the gross profit ASV recognizes on the sale of its
RC.30 product, parts and accessories. However, the Company does not expect to
incur significant after sale costs on the sale of products to Polaris.
The Company believes its existing cash and marketable securities, together
with cash expected to be provided by operations and available, unused credit
lines, will satisfy the Company's projected working capital needs and other cash
requirements for at least the next twelve months.
The statements set forth above under "Liquidity and Capital Resources" and
elsewhere in this Form 10-K regarding ASV's anticipated future sales and
earnings, its plans to jointly develop and manufacture rubber-tracked machines
with Caterpillar, including the number of models to be developed, the timing of
their planned introduction and ASV's plans to manufacture and sell machines to
Polaris, including the timing of their planned introduction, the anticipated
revenues from the sale of machines to Polaris and Caterpillar, ASV's anticipated
research and development expenditures and ASV's overall revenue goals are
forward-looking statements based on current expectations and assumptions, and
entail various risks and uncertainties that could cause actual results to differ
materially from those expressed in such forward-looking statements. Certain
factors may affect whether these machines are ultimately produced including
ASV's ability to successfully manufacture the machines, unanticipated delays,
costs or other difficulties in the manufacture of the machines, market
acceptance of the machines, general market conditions, corporate developments at
ASV, Polaris or Caterpillar and ASV's ability to realize the anticipated
benefits from its relationship with Polaris and Caterpillar. Actual results
might differ materially from those anticipated in such forward-looking
statements. Any forward-looking statements provided from time-to-time by the
Company represent only management's then-best current estimate of future results
or trends. Additional information regarding these risk factors and
uncertainties is detailed from time to time in the company's SEC filings,
including but not limited to, its report on Form 10-Q for the nine months ended
September 30, 2000.
Item 7A. Quantitative and Qualitative Disclosures About Market Risk
The Company has no history of, and does not anticipate in the future,
investing in derivative financial instruments, derivative commodity instruments
or other such financial instruments. Transactions with international customers
are entered into in US dollars, precluding the need for foreign currency hedges.
Additionally, the Company invests in money market funds and fixed rate U.S.
government and corporate obligations, which experience minimal volatility.
Thus, the exposure to market risk is not material.
Item 8. Financial Statements and Supplementary Data
Financial Statements
The following financial statements and financial schedules are attached as
a separate section immediately following the signature page of the Annual Report
on Form 10-K:
Report of Independent Certified Public Accountants
Consolidated Balance Sheets as of December 31, 2000 and 1999
Consolidated Statements of Earnings for the years ended December 31, 2000,
1999 and 1998
Consolidated Statements of Changes in Shareholders' Equity for the years
ended December 31, 2000, 1999 and 1998
Consolidated Statements of Cash Flows for the years ended December 31,
2000, 1999 and 1998
Notes to Consolidated Financial Statements
Supplementary Financial Information
The selected quarterly financial data is included in Note O to the
financial statements filed with this Annual Report on Form 10-K.
16
Item 9. Changes in and Disagreements With Accountants on Accounting and
Financial Disclosure
None.
PART III
Item 10. Directors and Executive Officers of the Registrant
The information required by Item 10 is incorporated by reference to the
sections entitled "Election of Directors", "Executive Officers" and "Section
16(a) Beneficial Ownership Compliance" in the Company's Proxy Statement for its
2001 Annual Meeting of Shareholders, which will be filed with the Securities and
Exchange Commission pursuant to Regulation 14A within 120 days of the Company's
fiscal year end.
Item 11. Executive Compensation
The information required by Item 11 is incorporated by reference to the
section entitled "Executive Compensation" in the Company's Proxy Statement for
its 2001 Annual Meeting of Shareholders, which will be filed with the Securities
and Exchange Commission pursuant to Regulation 14A within 120 days of the
Company's fiscal year end.
Item 12. Security Ownership of Certain Beneficial Owners and Management
The information required by Item 12 is incorporated by reference to the
section entitled "Security Ownership of Certain Beneficial Owners and
Management" in the Company's Proxy Statement for its 2001 Annual Meeting of
Shareholders, which will be filed with the Securities and Exchange Commission
pursuant to Regulation 14A within 120 days of the Company's fiscal year end.
Item 13. Certain Relationships and Related Transactions
The information required by Item 13 is incorporated by reference to the
section entitled "Certain Relationships and Related Transactions" in the
Company's Proxy Statement for its 2001 Annual Meeting of Shareholders, which
will be filed with the Securities and Exchange Commission pursuant to Regulation
14A within 120 days of the Company's fiscal year end.
PART IV
Item 14. Exhibits, Financial Statement Schedules and Reports on Form 8-K
(a)(1) Financial Statements
The financial statements filed as part of this report are listed
under Item 8. Financial Statements and Supplementary Data.
(a)(2) Financial Statement Schedules
The following items are attached as a separate section immediately
following the financial statements included in this Annual Report on Form
10-K:
Report of Independent Certified Public Accountants on the Financial
Statement Schedules for the years ended December 31, 2000, 1999 and
1998
Schedule II - Valuation and Qualifying Accounts for the years ended
December 31, 2000, 1999 and 1998
(a)(3) Exhibits
Exhibit
Number Description
------ -----------
3.1 Second Restated Articles of Incorporation of the Company (a)
17
3.1a Amendment to Second Restated Articles of Incorporation of the
Company filed January 6, 1997 (e)
3.1b Amendment to Second Restated Articles of Incorporation of the
Company filed May 4, 1998 (h)
3.2 Bylaws of the Company (a)
3.3 Amendment to Bylaws of the Company adopted April 13, 1999 (l)
4.1 Specimen form of the Company's Common Stock Certificate (a)
4.3 * 1994 Long-Term Incentive and Stock Option Plan (a)
4.4 Warrant issued to Leo Partners, Inc. on December 1, 1996 (d)
4.5 * 1996 Incentive and Stock Option Plan (e)
4.6 * 1996 Incentive and Stock Option Plan, as amended (f)
4.7 * 1998 Non-Employee Director Stock Option Plan (f)
4.8 * Amendment to 1998 Non-Employee Director Stock Option Plan (m)
4.9 Securities Purchase Agreement dated October 14, 1998 between
Caterpillar Inc. and the Company (h)
4.10 Warrant issued to Caterpillar Inc. on January 29, 1999 (i)
4.11 Voting Agreement dated as of October 14, 1998 by certain
shareholders of the Company and Caterpillar Inc. (h)
4.12 Securities Purchase Agreement dated October 31, 2000 between
Caterpillar Inc. and the Company (n)
4.13 Replacement Warrant issued to Caterpillar Inc. on October 31,
2000 (n)
10.1 Development Agreement dated July 14, 1994 among the Iron Range
Resources and Rehabilitation Board, the Grand Rapids Economic
Development Authority ("EDA") and the Company (b)
10.2 Lease and Option Agreement dated July 14, 1994 between the EDA
and the Company (b)
10.3 Option Agreement dated July 14, 1994 between the EDA and the
Company (b)
10.4 Supplemental Lease Agreement dated April 18, 1997 between the EDA
and the Company (e)
10.5 Supplemental Development Agreement dated April 18, 1997 between
the EDA and the Company (e)
10.6 Line of Credit dated May 22, 1997 between Norwest Bank Minnesota
North, N.A. and the Company (e)
10.7 * Employment Agreement dated October 17, 1994 between the Company
and Thomas R. Karges (c)
10.8 Consulting Agreement between the Company and Leo Partners, Inc.
dated December 1, 1996 (d)
10.9 Extension of Lease Agreement dated May 13, 1998 between the EDA
and the Company (g)
10.10 First Amendment to Credit Agreement dated September 30, 1998
between Norwest Bank Minnesota North, N.A. and the Company (g)
10.11 Commercial Alliance Agreement dated October 14, 1998 between
Caterpillar Inc. and the Company (h)
18
10.13 Management Services Agreement dated January 29, 1999 between
Caterpillar Inc. and the Company (j)
10.14 Marketing Agreement dated January 29, 1999 between Caterpillar
Inc. and the Company (j)
10.15 Third Amendment to Credit Agreement dated June 9, 1999 between
Norwest Bank Minnesota North, N.A. and the Company (k)
10.16 Fourth Amendment to Credit Agreement dated June 1, 2000 between
Norwest Bank Minnesota North, N.A. and the Company (m)
10.17 Multi-Terrain Rubber-Tracked Loader Alliance Agreement dated
October 31, 2000 between Caterpillar Inc. and the Company (n)
10.18** Manufacturing and Distribution Agreement dated January 2, 2001
between Polaris Industries Inc. and the Company
11 Statement re: Computation of Per Share Earnings
22 List of Subsidiaries (a)
23 Consent of Grant Thornton LLP, independent auditors
99 Risk Factors (n)
-----------------------------------------------------------------
(a) Incorporated by reference to the Company's Registration
Statement on Form SB-2 (File No. 33 61284C) filed July 7,
1994.
(b) Incorporated by reference to the Company's Post-Effective
Amendment No. 1 to Registration Statement on Form SB-2 (File
No. 33 61284C) filed August 3, 1994.
(c) Incorporated by reference to the Company's Quarterly Report
on Form 10-QSB for the quarter ended September 30, 1994
(File No. 33-61284C) filed November 11, 1994.
(d) Incorporated by reference to the Company's Annual Report on
Form 10-KSB for the year ended December 31, 1996 (File No.
0-25620) filed electronically March 28, 1997.
(e) Incorporated by reference to the Company's Quarterly Report
on Form 10-QSB for the quarter ended June 30, 1997 (File No.
0-25620) filed electronically August 13, 1997.
(f) Incorporated by reference to the Company's Definitive Proxy
Statement for the year ended December 31, 1997 (File No.
0-25620) filed electronically April 28, 1998.
(g) Incorporated by reference to the Company's Quarterly Report
on Form 10-Q for the quarter ended June 30, 1998 (File No.
0-25620) filed electronically August 12, 1998.
(h) Incorporated by reference to the Company's Current Report on
Form 8-K (File No. 0-25620) filed electronically October 27,
1998.
(i) Incorporated by reference to the Company's Current Report on
Form 8-K (File No. 0-25620) filed electronically February
11, 1999.
(j) Incorporated by reference to the Company's Annual Report on
Form 10-K for the year ended December 31, 1998 (File No.
0-25620) filed electronically March 26, 1999.
(k) Incorporated by reference to the Company's Quarterly Report
on Form 10-Q for the quarter ended
19
June 30, 1999 (File No. 0-25620) filed electronically August
9, 1999.
(l) Incorporated by reference to the Company's Quarterly Report
on Form 10-Q for the quarter ended September 30, 1999 (File
No. 0-25620) filed electronically November 12, 1999.
(m) Incorporated by reference to the Company's Quarterly Report
on Form 10-Q for the quarter ended June 30, 2000 (File No.
0-25620) filed electronically August 10, 2000.
(n) Incorporated by reference to the Company's Quarterly Report
on Form 10-Q for the quarter ended September 30, 2000 (File
No. 0-25620) filed electronically November 13, 2000.
* Indicates management contract or compensation plan or
arrangement.
** Certain information contained in this document has been
omitted and filed separately accompanied by a confidential
request pursuant to Rule 24b-2 of the Securities Exchange
Act of 1934.
(b) Reports on Form 8-K
The following current Report on Form 8-K was filed by the Company
during the quarter ended December 31, 2000:
Current Report on Form 8-K dated October 31, 2000 reporting under Item
9. "Regulation FD Disclosure" that on October 31, 2000, A.S.V., Inc. (A.S.V.)
closed a transaction with Caterpillar Inc. ("Caterpillar") whereby the following
events occurred:
ASV and Caterpillar completed a Securities Purchase Agreement in which
Caterpillar purchased 500,000 newly issued shares of A.S.V. Common
Stock at $18 per share for a total of $9 million. Caterpillar has
increased its ownership in A.S.V. to about 15 percent. The two
companies also announced the signing of an alliance agreement in which
they plan to jointly develop and manufacture a new product line of
Caterpillar rubber track skid steer loaders, called Multi-Terrain
Loaders.
20
SIGNATURES
Pursuant to the requirements of Section 13 or 15(d) of the Securities
Exchange Act of 1934, A.S.V., Inc. has duly caused this report to be signed on
its behalf by the undersigned, thereunto duly authorized:
A.S.V., Inc.
/s/ Gary Lemke Date: March 30, 2001
--------------------------- --------------------
By: Gary Lemke, President
Pursuant to the requirements of the Securities Exchange Act of 1934, this
report has been signed below by the following persons on behalf of the
Registrant and in the capacities and on the dates indicated.
/s/ Gary Lemke Date: March 30, 2001
------------------------------------------- --------------------
By: Gary Lemke, Chairman of the Board, President and Director
(Chief Executive Officer)
/s/ Jerome T. Miner Date: March 30, 2001
------------------------------------------- --------------------
By: Jerome T. Miner, Vice-Chairman of the Board and Director
/s/ Edgar E. Hetteen Date: March 30, 2001
------------------------------------------- --------------------
By: Edgar E. Hetteen, Vice President and Director
/s/ James Dahl Date: March 30, 2001
------------------------------------------- --------------------
By: James Dahl, Director
/s/ Leland T. Lynch Date: March 30, 2001
------------------------------------------- --------------------
By: Leland T. Lynch, Director
/s/ Karlin S. Symons Date: March 30, 2001
------------------------------------------- --------------------
By: Karlin S. Symons, Director
/s/ R. E. Turner, IV Date: March 30, 2001
------------------------------------------- --------------------
By: R. E. Turner, IV, Director
/s/ Richard A. Benson Date: March 30, 2001
------------------------------------------- --------------------
By: Richard A. Benson, Director
/s/ Richard A. Cooper Date: March 30, 2001
------------------------------------------- --------------------
By: Richard A. Cooper, Director
/s/ Robert Macier Date: March 30, 2001
------------------------------------------- --------------------
By: Robert Macier, Director
/s/ Thomas R. Karges Date: March 30, 2001
------------------------------------------- --------------------
By: Thomas R. Karges, Chief Financial Officer
REPORT OF INDEPENDENT CERTIFIED PUBLIC ACCOUNTANTS
ON SCHEDULE
Board of Directors
A.S.V., Inc.
In connection with our audit of the consolidated financial statements
of A.S.V., Inc. referred to in our report dated February 23, 2001, which is
included in the Annual Report of A.S.V., Inc. on Form 10-K for the year ended
December 31, 2000, we have also audited Schedule II for each of the three years
in the period ended December 31, 2000. In our opinion, this schedule presents
fairly, in all material respects, the information required to be set forth
therein.
/s/ GRANT THORNTON LLP
Minneapolis, Minnesota
February 23, 2001
A.S.V., Inc. and Subsidiary
SCHEDULE II - VALUATION AND QUALIFYING ACCOUNTS
Years ended December 31, 2000, 1999 and 1998
Balance Additions Balance
Beginning Charged to End of
Accrued Warranty of Period Expense Deductions (A) Period
- ------------------ --------- ---------- -------------- --------
2000 $450,000 $ 964,947 $ 964,947 $450,000
1999 $400,000 $1,120,587 $1,070,587 $450,000
1998 $200,000 $1,197,973 $ 997,973 $400,000
(A) Warranty credits issued
FINANCIAL STATEMENTS AND
REPORT OF INDEPENDENT CERTIFIED
PUBLIC ACCOUNTANTS
A.S.V., Inc.
December 31, 2000, 1999 and 1998
A.S.V., Inc.
CONSOLIDATED BALANCE SHEETS
December 31, 2000 and 1999
ASSETS 2000 1999
----------- -----------
CURRENT ASSETS
Cash and cash equivalents $ 9,483,861 $ 743,184
Short-term investments 1,278,282 1,247,696
Accounts receivable (net of allowance for doubtful accounts
of $75,000 in 2000 and $40,000 in 1999) 10,557,907 8,661,049
Inventories 28,064,998 32,391,256
Prepaid expenses and other 965,026 811,076
----------- -----------
Total current assets 50,350,074 43,854,261
PROPERTY AND EQUIPMENT, net 4,656,118 4,795,674
----------- -----------
$55,006,192 $48,649,935
=========== ===========
LIABILITIES AND
SHAREHOLDERS' EQUITY
CURRENT LIABILITIES
Line of credit $ - $ 4,080,000
Current portion of long-term liabilities 82,090 254,412
Accounts payable 1,822,912 1,775,883
Accrued liabilities
Compensation 270,956 252,708
Commissions 82,790 306,831
Warranties 450,000 450,000
Other 220,178 237,134
Income taxes payable 197,021 -
----------- -----------
Total current liabilities 3,125,947 7,356,968
LONG-TERM LIABILITIES, less current portion 2,116,898 2,197,046
COMMITMENTS AND CONTINGENCIES - -
SHAREHOLDERS' EQUITY
Capital stock, $.01 par value:
Preferred stock, 11,250,000 shares authorized; no shares
issued or outstanding - -
Common stock, 33,750,000 shares authorized; shares issued
and outstanding - 10,209,997 in 2000 and 9,686,457 in 1999 102,100 96,865
Additional paid-in capital 40,070,685 30,859,403
Retained earnings 9,590,562 8,139,653
----------- -----------
49,763,347 39,095,921
----------- -----------
$55,006,192 $48,649,935
=========== ===========
The accompanying notes are an integral part of these financial statements.
F-2
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF EARNINGS
Years ended December 31, 2000, 1999 and 1998
2000 1999 1998
----------- ----------- -----------
Net sales $43,859,509 $36,168,415 $39,018,904
Cost of goods sold 34,794,783 27,739,554 29,487,983
----------- ----------- -----------
Gross profit 9,064,726 8,428,861 9,530,921
Operating expenses
Selling, general and administrative 6,210,514 5,670,629 3,479,911
Research and development 679,233 531,375 319,324
----------- ----------- -----------
6,889,747 6,202,004 3,799,235
----------- ----------- -----------
Operating income 2,174,979 2,226,857 5,731,686
Other income (expense)
Interest expense (266,890) (306,202) (576,224)
Interest income 225,043 229,405 98,465
Other, net 76,457 16,993 92,128
----------- ----------- -----------
34,610 (59,804) (385,631)
----------- ----------- -----------
Income before income taxes 2,209,589 2,167,053 5,346,055
Provision for income taxes 758,680 755,000 1,980,000
----------- ----------- -----------
NET EARNINGS $ 1,450,909 $ 1,412,053 $ 3,366,055
=========== =========== ===========
Net earnings per common share
Basic $ .15 $ .15 $ .43
=========== =========== ===========
Diluted $ .15 $ .14 $ .40
=========== =========== ===========
Weighted average number of common shares
outstanding
Basic 9,782,919 9,586,032 7,764,504
=========== =========== ===========
Diluted 9,966,661 9,941,616 9,015,513
=========== =========== ===========
The accompanying notes are an integral part of these financial statements.
F-3
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY
Years ended December 31, 2000, 1999 and 1998
Common stock Additional
------------------------- paid-in Retained
Shares Amount capital earnings Total
---------- -------- ----------- ---------- -----------
Balance at December 31, 1997 7,518,310 $ 75,183 $ 6,520,371 $3,361,545 $ 9,957,099
Exercise of stock options and
warrants 456,248 4,562 1,281,722 - 1,286,284
Tax benefit from exercise of stock
options - - 835,000 - 835,000
Cost of shares retired (54,535) (545) (1,074,186) - (1,074,731)
Exchange of convertible
debentures, net of exchange costs 681,812 6,818 4,987,515 - 4,994,333
Warrant earned - - 151,200 - 151,200
Net earnings - - - 3,366,055 3,366,055
---------- -------- ----------- ---------- -----------
Balance at December 31, 1998 8,601,835 86,018 12,701,622 6,727,600 19,515,240
Issuance of common stock, net of
issuing costs 1,000,000 10,000 17,539,173 - 17,549,173
Exercise of stock options 115,740 1,158 801,541 - 802,699
Tax benefit from exercise of stock
options - - 270,000 - 270,000
Cost of shares retired (31,118) (311) (604,133) - (604,444)
Warrant earned - - 151,200 - 151,200
Net earnings - - - 1,412,053 1,412,053
---------- -------- ----------- ---------- -----------
Balance at December 31, 1999 9,686,457 96,865 30,859,403 8,139,653 39,095,921
Issuance of common stock, net of
issuing costs 500,000 5,000 8,942,149 - 8,947,149
Exercise of stock options 26,750 267 95,288 - 95,555
Tax benefit from exercise of stock
options - - 60,000 - 60,000
Cost of shares retired (3,210) (32) (37,355) - (37,387)
Warrant earned - - 151,200 - 151,200
Net earnings - - - 1,450,909 1,450,909
---------- -------- ----------- ---------- -----------
Balance at December 31, 2000 10,209,997 $102,100 $40,070,685 $9,590,562 $49,763,347
========== ======== =========== ========== ===========
The accompanying notes are an integral part of these financial statements.
F-4
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF CASH FLOWS
Years ended December 31, 2000, 1999 and 1998
2000 1999 1998
----------- ------------ -----------
Cash flows from operating activities:
Net earnings $ 1,450,909 $ 1,412,053 $ 3,366,055
Adjustments to reconcile net earnings to net cash provided by
(used in) operating activities:
Depreciation and amortization 413,268 380,750 314,131
Interest accrued on capital lease obligation - 48,288 50,242
Deferred income taxes 5,000 (110,000) (235,000)
Warrant earned 151,200 151,200 151,200
Tax benefit from stock option exercises (60,000) (270,000) (835,000)
Changes in assets and liabilities
Accounts receivable (1,896,858) (4,097,209) (2,573,934)
Inventories 4,326,258 (13,614,498) (7,102,731)
Prepaid expenses and other (198,608) 290,697 (334,561)
Accounts payable 47,029 (1,137,643) 1,438,825
Accrued liabilities (222,749) 361,601 324,475
Income taxes 356,679 624,673 1,304,337
----------- ------------ -----------
Net cash provided by (used in) operating activities 4,372,128 (15,960,088) (4,131,961)
----------- ------------ -----------
Cash flows from investing activities:
Purchase of property and equipment (273,712) (612,428) (564,208)
Purchase of short-term investments (278,475) (4,523,188) -
Redemption of short-term investments 247,889 3,518,527 1,012,125
----------- ------------ -----------
Net cash provided by (used in) investing activities (304,298) (1,617,089) 447,917
----------- ------------ -----------
Cash flows from financing activities:
Proceeds from (payments to) line of credit advances, net (4,080,000) 545,000 3,535,000
Principal payments on long-term liabilities (252,470) (280,632) (64,876)
Proceeds from issuance of common stock, net 8,947,149 17,549,173 -
Proceeds from exercise of stock options and warrants 95,555 802,699 1,286,284
Retirement of common stock (37,387) (604,444) (1,074,731)
Costs of exchanging convertible debentures - - (5,667)
----------- ------------ -----------
Net cash provided by financing activities 4,672,847 18,011,796 3,676,010
----------- ------------ -----------
Net increase (decrease) in cash and cash equivalents 8,740,677 434,619 (8,034)
Cash and cash equivalents at beginning of period 743,184 308,565 316,599
----------- ------------ -----------
Cash and cash equivalents at end of period $ 9,483,861 $ 743,184 $ 308,565
=========== ============ ===========
Supplemental disclosure of cash flow information:
Cash paid for interest $ 331,468 $ 287,262 $ 613,337
Cash paid for income taxes 473,322 535,145 1,745,663
=========== ============ ===========
Supplemental disclosure of investing and financing activities:
Assets acquired by incurring capital lease obligation $ - $ - $ 327,285
Assets acquired by incurring promissory note - - 350,543
Issuance of common stock in exchange for convertible
debentures - - 5,000,000
=========== ============ ===========
F-5
A.S.V., Inc.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - CONTINUED
December 31, 2000, 1999 and 1998
NOTE A - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES
The Company designs and manufactures track-driven, all-season vehicles and
related accessories and attachments in northern Minnesota. The Company sells
its products through an international dealer network.
A summary of the significant accounting policies consistently applied in the
preparation of the accompanying consolidated financial statements follows:
Principles of Consolidation
---------------------------
The consolidated financial statements include the accounts of A.S.V., Inc. and
its wholly-owned subsidiary. All intercompany accounts and transactions have
been eliminated in consolidation.
Revenue Recognition
-------------------
The Company generally recognizes revenue on its product sales when persuasive
evidence of an arrangement exists, delivery has occurred, the price is fixed
or determinable and collectibility is reasonably assured.
Pursuant to a contractual arrangement, revenues of $4 million were recognized
for completed products held at the Company's warehouse. The customer requested
the Company to hold the products as it had physical space limitations at its
facilities. The products will be delivered during the months of January
through April 2001.
Fair Value of Financial Instruments
-----------------------------------
The financial statements include the following financial instruments: cash
equivalents, accounts receivable, accounts payable and bank debt. At December
31, 2000 and 1999, no separate comparison of fair values versus carrying
values is presented for the afore-mentioned financial instruments since their
fair values are not significantly different than their balance sheet carrying
amounts.
Cash Equivalents
----------------
All highly liquid temporary cash investments with an original maturity of
three months or less are considered to be cash equivalents. At December 31,
2000 and 1999, the Company had cash equivalents of approximately $9,765,000
and $508,000, which consisted of a money market account. The fair value of
these investments approximates cost.
Accounts Receivable
-------------------
The Company grants credit to customers in the normal course of business.
Management performs on-going credit evaluations of customers and maintains
allowances for potential credit losses which, when realized, have generally
been within management expectations.
Inventories
-----------
Inventories are stated at the lower of cost (determined using the first-in,
first-out method) or market.
Property and Equipment
----------------------
Property and equipment are carried at cost. Depreciation is provided in
amounts sufficient to relate the cost of depreciable assets to operations over
their estimated service lives. Building and improvements are depreciated over
periods of 18 to 39 years using the straight-line method. Tooling, machinery
and equipment, and vehicles are depreciated over periods of 3 to 20 years
using straight-line and accelerated methods. Accelerated methods are used for
income tax purposes.
Warranties
----------
Provision for estimated warranty costs is recorded at the time of sale and
periodically adjusted to reflect actual experience.
Advertising Expense
-------------------
Advertising is expensed as incurred. Advertising expense were approximately
$233,000, $423,000 and $416,000 for 2000, 1999 and 1998.
Research and Development
------------------------
All research and development costs are expensed as incurred.
F-6
A.S.V., Inc.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - CONTINUED
December 31, 2000, 1999 and 1998
NOTE A - SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES - Continued
Stock Options
-------------
The Company accounts for the issuance of stock options to employees using the
intrinsic value method. Under this method, compensation expense is recognized
for the amount by which the market price of the common stock on the date of
grant exceeds the exercise price of an option.
Accounting Estimates
--------------------
Preparing consolidated financial statements in conformity with accounting
principles generally accepted in the United States of America requires
management to make estimates and assumptions that affect the reported amounts
of assets and liabilities, related revenues and expenses and disclosure of
contingent assets and liabilities at the date of the financial statements.
Actual results could differ from these estimates.
Net Earnings Per Common Share
-----------------------------
Basic net earnings per share is computed by dividing net earnings by the
weighted average number of outstanding common shares. Diluted net earnings per
share is computed by dividing net earnings, plus the interest expense (net of
tax) applicable to the convertible debentures in the amount $233,213 for 1998,
by the weighted average number of outstanding common shares and common share
equivalents relating to stock options, warrants and conversion of debentures,
when dilutive.
For the years ended December 31, 2000, 1999 and 1998, 183,742, 355,584 and
1,251,009 shares of common stock equivalents were included in the computation
of diluted net income per share. Options and warrants to purchase 11,134,314,
10,731,252 and 381,750, shares of common stock with a weighted average
exercise price of $20.21, $20.88, and $18.33 were outstanding at December 31,
2000, 1999 and 1998, but were excluded from the computation of common share
equivalents because they were anti-dilutive.
New Accounting Pronouncements
-----------------------------
In March 2000, the Financial Accounting Standards Board issued Interpretation
No. 44, Accounting for Certain Transactions Involving Stock Compensation, an
interpretation of Accounting Principles Board ("APB") Opinion No. 25, Stock
Issued to Employees. Interpretation No. 44 clarifies the application of APB
No. 25 for the definition of an employee for purposes of applying APB No. 25,
the criteria for determining whether a plan qualifies as a non-compensatory
plan, the accounting consequence of various modifications to the terms of a
previously fixed stock option or award and the accounting for an exchange of
stock compensation awards in a business combination. The adoption of this
interpretation did not have a material impact on the consolidated financial
statements.
Reclassifications
-----------------
Certain 1999 and 1998 amounts have been reclassified to conform to the 2000
presentation.
NOTE B - SHORT-TERM INVESTMENTS
Short-term investments consist primarily of a diversified portfolio of taxable
governmental agency bonds, which mature between 2001 and 2004. The Company
considers the investments as "available-for-sale." At December 31, 2000 and
1999, cost was equal to fair value and no amount was included as a separate
component of shareholders' equity.
NOTE C - INVENTORIES
Inventories consist of the following:
December 31,
--------------------------
2000 1999
----------- -----------
Raw materials,
semi-finished and
WIP inventory $16,032,996 $19,531,208
Finished goods 6,561,815 7,574,115
Used equipment
held for resale 5,470,187 5,285,933
----------- -----------
$28,064,998 $32,391,256
=========== ===========
F-7
A.S.V., Inc.
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS - CONTINUED
December 31, 2000, 1999 and 1998
NOTE D - PROPERTY AND EQUIPMENT
Property and equipment consist of the following:
December 31,
--------------------------
2000 1999
---------- ----------
Land $ 132,635 $ 132,635
Buildings and
improvements 3,651,732 3,632,813
Tooling 544,392 445,904
Machinery and
equipment 1,655,927 1,500,825
Vehicles 338,998 337,795
---------- ----------
6,323,684 6,049,972
Less accumulated
depreciation 1,667,566 1,254,298
---------- ----------
$4,656,118 $4,795,674
========== ==========
NOTE E - LINES OF CREDIT
The Company has a $10,000,000 line of credit agreement with a bank which is
due on demand. The interest rate is variable at prime less one half percent
(effective rate of 9.0% and 8.0% as of December 31, 2000 and 1999). As of
December 31, 2000, there were no advances on this line of credit. The
agreement contains restrictive covenants including maintaining certain
tangible net worth levels and cash flow coverage ratios.
NOTE F - LONG-TERM LIABILITIES
Convertible Debentures
----------------------
The Company previously issued $5,000,000 of unsecured senior convertible
debentures with interest at 6.5% that were exchanged during November 1998 for
681,812 shares of common stock.
Capital Lease Obligation
------------------------
The Company leases its manufacturing and office building from the Grand Rapids
Economic Development Authority.
The agreement provides for a balloon payment of approximately $756,000 in
January 2003 and extends to January 2018.
Future minimum lease payments under this capital lease obligation at December
31, 2000 are as follows:
2001 $ 228,134
2002 228,134
2003 892,208
2004 135,554
2005 135,554
Thereafter 1,418,599
----------
Total payments 3,038,183
Amounts representing interest (weighted
average 6.9%) 839,195
----------
Present value of minimum
capitalized lease payments $2,198,988
==========
Assets related to the capital lease were $2,250,773 at December 31, 2000 and
1999. Accumulated amortization was $219,065 and $162,796 at December 31, 2000
and 1999.
Note Payable
------------
During 1998, property was exchanged for property with a value of $149,457 and
a promissory note for $350,543. The note was repaid in 2000.
NOTE G - PROVISION FOR INCOME TAXES
The provision for income taxes consists of the following:
Year ended December 31,
---------------------------------
2000 1999 1998
-------- --------- ----------
Current
Federal $683,680 $ 760,000 $1,984,000
State 70,000 105,000 231,000
-------- --------- ----------
753,680 865,000 2,215,000
Deferred 5,000 (110,000) (235,000)
-------- --------- ----------
$758,680 $ 755,000 $1,980,000
======== ========= ==========
Net deferred income tax assets relate to the tax effect of temporary
differences as follows:
December 31,
---------------------
2000 1999
-------- --------
Accruals and reserves $445,000 $490,000
Other 90,000 50,000
-------- --------
$535,000 $540,000
======== ========
The net deferred tax asset is included with prepaid expenses and other in the
financial statements.
F-8
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY
Years ended December 31, 2000, 1999 and 1998
NOTE G - PROVISION FOR INCOME TAXES -
Continued
The following is a reconciliation of the Federal statutory income tax rate to
the effective tax rate:
2000 1999 1998
---- ---- ----
Statutory federal rate 34.0% 34.0% 34.0%
State income taxes, net
of federal benefit 2.6 2.6 2.6
Other (1.5) (1.8) .4
---- ----- ----
35.1% 34.8% 37.0%
==== ==== ====
The Company realizes an income tax benefit from the exercise or early
disposition of certain stock options. This benefit results in a decrease in
current income taxes payable and an increase in additional paid-in capital.
NOTE H - TRANSACTIONS WITH CATERPILLAR
A Securities Purchase Agreement (the Agreement) with Caterpillar Inc. closed
on January 29, 1999. Under the terms of the Agreement, Caterpillar acquired,
for an aggregate purchase price of $18,000,000, one million newly issued
shares of common stock and a warrant to purchase an additional 10,267,127
newly issued shares of common stock at a price of $21.00 per share. The
warrant is exercisable at any time through January 2009 subject to partial
termination in the event the Company achieves certain financial goals. In
connection with this transaction, the Company incurred expenses of
approximately $450,000, which were offset against the proceeds for the issued
shares.
As a result of the Agreement, the board of directors was increased from eight
to ten members with the additional two members appointed by Caterpillar. In
addition, the Agreement contains other provisions which allow Caterpillar to
maintain its proportionate potential ownership and that restricts certain
situations including acquisitions, loans and the payment of dividends, without
approval of at least one of the Caterpillar designated members of the Board.
The warrant issued to Caterpillar provides for a potential change of control.
As a result, in accordance with the 1994 and 1996 stock option plans, all
previously
issued stock options became fully vested upon the closing of the transaction.
The Company and Caterpillar also entered into a Commercial Alliance Agreement
pursuant to which Caterpillar will provide the Company with access to its
dealer network and will make various management, financial and engineering
resources available to the Company. Included in the Commercial Alliance
Agreement is a Marketing Agreement which provides, among other things, that
the Company will pay Caterpillar a commission equal to 5% of the dealer net
price for complete machines and 3% for replacement parts and Company-branded
attachments for all sales made to Caterpillar dealers. In addition, if the
Company's products are sold under the Caterpillar brand name, the Company pays
Caterpillar a trademark license fee equal to 3% of the net sales of these
products to Caterpillar dealers. The Company and Caterpillar also entered into
other ancillary agreements for the benefit of both the Company and
Caterpillar. Total commission expense under the agreement was approximately
$1,072,000 and $923,000 in 2000 and 1999.
In October 2000, the Company completed another Securities Purchase Agreement
with Caterpillar Inc. in which Caterpillar purchased 500,000 newly issued
shares of common stock at a price of $18.00 per share. The Company also
amended its original warrant issued to Caterpillar reducing the number of
shares of Company common stock available for purchase under the original
warrant by 500,000 shares.
At December 31, 2000, Caterpillar owned approximately 15% of the Company's
outstanding common stock and will have the right to own up to approximately
52% of the Company's common stock (assuming the exercise of all outstanding
options and warrants) upon exercise of the warrant.
During 2000, the Company purchased parts used in its products from
Caterpillar. The Company also reimburses Caterpillar for the salary related
costs of two Caterpillar employees that work on the Company's behalf. In
addition, the Company utilizes Caterpillar's warranty processing system to
handle warranty claims on its machines and reimburses Caterpillar for the
warranty expense incurred by Caterpillar dealers. During 2000, total parts
purchases, salary and warranty reimbursements were approximately $3,828,000.
Also, at December 31, 2000, accounts payable to Caterpillar were $389,000.
F-9
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY
Years ended December 31, 2000, 1999 and 1998
NOTE I - SHAREHOLDERS' EQUITY
Stock Option Plans
------------------
The Company has two stock option plans under which up to 3,375,000 shares of
common stock are available for issuance. Stock options may be granted to any
employee, including officers and directors of the Company, and certain
non-employees, at a price not less than the fair market value of the Company's
common stock on the date of grant. Options generally expire five to seven
years from the date of grant. Options granted under the plans are generally
exercisable in annual installments, beginning one year from the date of grant.
Director Stock Option Plan
--------------------------
The Company also has a stock option plan under which 450,000 shares of common
stock are available for issuance. Stock options may be granted to directors
who are not employees of the Company at a price not less than the fair market
value of the Company's common stock on the date of grant. Options expire five
years from date of grant and are exercisable in annual installments, beginning
one year from the date of grant.
The plan, as amended, provides that each eligible director shall receive an
option to purchase 3,000 shares on the first business day of each calendar
year. However, in 2000 and 1999, 5,000 and 1,000 shares were granted to each
director.
Option transactions under the plans during each of the three years in the
period ended December 31, 2000 are summarized as follows:
Weighted
Average
Exercise
Shares Price
--------- --------
Outstanding at
December 31, 1997 1,533,975 $12.07
Granted 9,375 16.55
Exercised (186,248) 4.40
---------
Outstanding at
December 31, 1998 1,357,102 13.16
Granted 55,752 17.88
Exercised (115,740) 6.94
---------
Outstanding at
December 31, 1999 1,297,114 13.91
Granted 149,500 15.40
Exercised (26,750) 3.57
Canceled (31,500) 16.49
---------
Outstanding at
December 31, 2000 1,388,364 14.21
=========
At December 31, 2000, 1999 and 1998, 1,208,802, 1,242,114 and 584,420 options
were exercisable with a weighted average exercise price of $13.96, $13.74 and
$11.46.
The following information applies to grants that are outstanding at December
31, 2000:
Options outstanding
--------------------------------------
Weighted-
Number average Weighted-
Range of outstanding remaining average
exercise at contractual exercise
prices period end life price
- ---------------- ----------- ----------- ---------
$1.44 2,050 .9 years $ 1.44
2.56 - 3.83 40,500 1.9 years 2.99
12.17 - 18.25 991,814 2.6 years 13.23
18.33 354,000 3.5 years 18.33
----------
1,388,364
==========
Options exercisable
-------------------------
Number Weighted-
Range of exercisable average
exercise at exercise
prices period end price
- ---------------- ----------- -----------
$1.44 2,050 $ 1.44
2.56 - 3.83 40,500 2.99
12.17 - 18.25 812,252 12.63
18.33 354,000 18.33
---------
1,208,802
=========
The weighted average fair values of the options granted during 2000, 1999 and
1998 are $7.76, $9.62 and $10.07. The fair value of each option grant is
estimated on the date of grant using the Black-Scholes options-pricing model
with the following weighted-average assumptions used for all grants in 2000,
1999 and 1998; zero dividend yield; expected volatility of 42.5%, 50.0% and
49.68%, risk-free interest rate of 4.93%, 6.83% and 5.37% and expected lives
of 6.60, 6.78 and 7.00 years.
F-10
A.S.V., Inc.
CONSOLIDATED STATEMENTS OF CHANGES IN SHAREHOLDERS' EQUITY
Years ended December 31, 2000, 1999 and 1998
NOTE I - SHAREHOLDERS' EQUITY -
Continued
The Company's pro forma net income and net income per common share for 2000,
1999 and 1998, had the fair value based method been used, are set forth below:
2000 1999 1998
---------- ----------- ----------
Net earnings As reported $1,450,909 $ 1,412,053 $3,366,055
(loss)
Pro forma 1,114,566 (3,176,720) 1,500,730
Net earnings
(loss) per
common
share
Basic As reported $ .15 $ .15 $ .43
Pro forma .11 (.33) .19
Diluted As reported .15 .14 .40
Pro forma .11 (.33) .19
Shares Retired
--------------
During 2000, 1999 and 1998, in connection with the exercise of stock options
by employees and directors, the Company repurchased 3,210, 31,118 and 54,535
shares of stock from various employees and directors of the Company for total
consideration of $37,387, $604,444, and $1,074,731. These shares had been held
for longer than six months and were considered mature shares.
NOTE J - RELATED PARTY TRANSACTION
The Company uses a public relations firm that is affiliated with one of the
Company's directors. Total fees paid to the public relations firm in 2000 were
approximately $201,000.
NOTE K - CONSULTING AGREEMENT
The Company entered into a consulting agreement and issued a warrant for the
purchase of 337,500 shares of the Company's common stock at $7.33 per share,
expiring December 1, 2006. Subsequently, an individual who contracts with the
consulting firm was appointed a member of the Board of Directors. The warrant
is exercisable and outstanding as of December 31, 2000.
The fair value of $2.24 per share was calculated on the date of grant using
the average of the Black-Scholes and Shelton options-pricing models.
Compensation costs of $151,200 were recognized in 2000, 1999 and
1998 and the remaining $138,600 will be recognized in 2001.
NOTE L - CONTINGENCIES
The Company is subject to litigation in the normal course of its business.
Management believes the outcome of such litigation will not have a material
adverse effect on the operations or financial position of the Company.
NOTE M - MAJOR CUSTOMERS
During 2000 and 1999, no customers accounted for over 10% of sales. During
1998, 20.6% of sales were made to one unaffiliated customer.
NOTE N - EMPLOYEE BENEFIT PLAN
The Company has a 401(k) employee savings and profit sharing plan which
provides for participant salary deferrals of up to $10,500 and discretionary
Company contributions. The plan covers employees who have completed three
months of service, as defined in the plan, and who have attained the age of 20
and one-half. Company contributions for 2000, 1999 and 1998 were $45,142,
$37,285 and $28,863.
NOTE O - SUPPLEMENTARY FINANCIAL INFORMATION (unaudited)
The following table summarizes quarterly, unaudited financial data for 2000
and 1999.
2000
----------------------------------------
Quarters 1st 2nd 3rd 4th
- -------- ------- ------- ------- -------
(Dollars in thousands, except per share data)
Net sales $11,184 $12,124 $10,533 $10,019
Gross profit 2,533 2,967 1,927 1,638
Net earnings 417 599 220 215
Net earnings per
common share
Basic .04 .06 .02 .02
Diluted .04 .06 .02 .02
1999
----------------------------------------
Quarters 1st 2nd 3rd 4th
- -------- ------- ------- ------- -------
(Dollars in thousands, except per share data)
Net sales $ 8,463 $ 9,064 $ 8,781 $ 9,860
Gross profit 2,237 2,419 1,586 2,187
Net earnings 649 689 21 54
Net earnings per
common share
Basic .07 .07 .00 .01
Diluted .07 .07 .00 .01
F-11
[LOGO OF GRANT THORNTON]
REPORT OF INDEPENDENT CERTIFIED PUBLIC ACCOUNTANTS
Board of Directors
A.S.V., Inc.
We have audited the accompanying consolidated balance sheets of A.S.V., Inc. as
of December 31, 2000 and 1999, and the related consolidated statements of
earnings, changes in shareholders' equity, and cash flows for each of the three
years in the period ended December 31, 2000. These financial statements are the
responsibility of the Company's management. Our responsibility is to express an
opinion on these financial statements based on our audits.
We conducted our audits in accordance with auditing standards generally accepted
in the United States of America. Those standards require that we plan and
perform the audit to obtain reasonable assurance about whether the financial
statements are free of material misstatement. An audit includes examining, on a
test basis, evidence supporting the amounts and disclosures in the financial
statements. An audit also includes assessing the accounting principles used and
significant estimates made by management, as well as evaluating the overall
financial statement presentation. We believe that our audits provide a
reasonable basis for our opinion.
In our opinion, the financial statements referred to above, present fairly, in
all material respects, the consolidated financial position of A.S.V., Inc. as of
December 31, 2000 and 1999, and the consolidated results of their operations and
their consolidated cash flows for each of the three years in the period ended
December 31, 2000, in conformity with accounting principles generally accepted
in the United States of America.
/s/ GRANT THORNTON LLP
Minneapolis, Minnesota
February 23, 2001
F-12
EXHIBIT INDEX
Exhibit Method of Filing
- ----------- ----------------
10.18** Manufacturing and Distribution Agreement dated January 2, 2001
between Polaris Industries Inc. and the Company Filed herewith electronically
11 Statement re: Computation of Per Share Earnings Filed herewith electronically
23 Consent of Grant Thornton LLP, independent auditors Filed herewith electronically
** Certain information contained in this document has been omitted and
filed separately accompanied by a confidential request pursuant to
Rule 24b-2 of the Securities Exchange Act of 1934.