Back to GetFilings.com



UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549


FORM 10-K


(Mark One)

[X]    ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2001 or

[   ]    TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the transition period from __________________ to ___________________


Commission File Number 0-22529

inTEST Corporation
(Exact name of registrant as specified in its charter)

Delaware
(State or other jurisdiction of incorporation or organization)

22-2370659
(I.R.S. Employer Identification Number)

 
7 Esterbrook Lane
Cherry Hill, New Jersey 08003
(Address of principal executive offices, including zip code)

(856) 424-6886
(Registrant's telephone number, including area code)


Securities registered pursuant to Section 12(b) of the Act: None

Securities registered pursuant to Section 12(g) of the Act: Common Stock, par value $0.01 per share.

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days. Yes /X/ No /  /

The aggregate market value of the voting and non-voting common equity held by non-affiliates of the Registrant computed by reference to the closing price of such stock on March 15, 2002 as quoted on the Nasdaq National Market system was $29,656,349.

The number of shares outstanding of the Registrant's Common Stock, as of March 15, 2002 is 8,685,205.

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant's knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. /X/


 

 

 

 


inTEST Corporation
Annual Report on Form 10-K

INDEX

 

 

 

Part I:

 

Page

 

Item 1:

Description of Business

3

 

Item 2:

Properties

9

 

Item 3:

Legal Proceedings

9

 

Item 4:

Submission of Matters to a Vote of Security Holders

9

Part II:

 

 

Item 5:

Market for Registrant's Common Equity and Related Stockholder Matters

9

 

Item 6:

Selected Financial Data

10

 

Item 7:

Management's Discussion and Analysis of Financial Condition and Results of Operations

11

Item 7A:

Quantitative and Qualitative Disclosures About Market Risk

19

Item 8:

Financial Statements and Supplementary Data

19

 

Item 9:

Changes in and Disagreements with Accountants on Accounting and Financial Disclosures

19

Part III:

 

 

Item 10:

Directors and Executive Officers

20

 

Item 11:

Executive Compensation

20

 

Item 12:

Security Ownership of Certain Beneficial Owners and Management

20

 

Item 13:

Certain Relationships and Related Transactions

20

Part IV:

 

 

Item 14:

Exhibits, Financial Statement Schedules and Reports on Form 8-K

20

Signatures

22

Index to Exhibits

23

Index to Consolidated Financial Statements and Consolidated Financial Statement Schedule

24

 

 

 

 

 

 

- 2 -

 


 

 

 

inTEST Corporation
Annual Report on Form 10-K


PART I
:

From time to time, we make written or oral "forward-looking statements" within the meaning of the Private Securities Litigation Reform Act of 1995, including statements contained in our filings with the Securities and Exchange Commission (including this Report on Form 10-K), our annual report to stockholders and in other communications. These statements do not convey historical information, but relate to predicted or potential future events, such as statements of our plans, strategies and intentions, or our future performance or goals, and can often be identified by the use of forward-looking terminology such as "believes", "expects", "intends", "may", "will", "should" or "anticipates" or similar terminology. Investors and prospective investors are cautioned that such statements are only projections. These statements involve risks and uncertainties and are based upon various assumptions. We discuss many of these risks and uncertainties under the heading "Risks That Could Affect Future Results" in "Man agement's Discussion and Analysis of Financial Condition and Results of Operations," below, and elsewhere in this Report. These risks, among others, could cause our actual future results to differ materially from those described in our forward-looking statements. We are not obligated to update these forward-looking statements, even though our situation may change in the future.


Item 1.
  DESCRIPTION OF BUSINESS

INTRODUCTION

We are a leading independent designer, manufacturer and marketer of manipulator and docking hardware products, temperature management systems and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment, or ATE, in the testing of integrated circuits, or ICs. Our high performance products are designed to enable semiconductor manufacturers to improve the efficiency of their IC test processes and, consequently, their profitability. We supply our products worldwide to major semiconductor manufacturers directly and through leading ATE manufacturers. Our customers include Texas Instruments, ST Microelectronics, Agere Systems (formerly the Microelectronics Group of Lucent Technologies), Philips, Motorola, Teradyne, Cascade Microtech, Electroglas, Tokyo Seimitsu, Agilent Technologies (formerly Hewlett Packard), LTX, Analog Devices and Credence Systems' ICE Division (formerly TMT).

We were incorporated in New Jersey in 1981 and reincorporated in Delaware in April 1997. We established inTEST Limited in the U.K. in 1985, inTEST Kabushiki Kaisha (inTEST K.K.) in Japan in 1987, inTEST PTE, Limited in Singapore in 1990 and inTEST GmbH in Germany in 2000. inTEST Limited designs, manufactures, markets and provides technical support for our products principally in Europe. inTEST K.K. acts as a liaison office with Japanese ATE manufacturers, and markets and provides technical support for our products in Japan. inTEST PTE, Limited designs, manufactures, markets and provides technical support to customers in Southeast Asia. inTEST GmbH provides sales and service in continental Europe for temperature management systems as well as sales and service for manipulator, docking hardware and tester interface products for selected accounts. In 1997, we completed our initial public offering. In 1998, we acquired all of the stock of TestDesign Corporation, which expanded our capabilities in the design, manu facture and marketing of tester interface products. On March 9, 2000, we acquired all of the stock of Temptronic Corporation, a designer, manufacturer and marketer of high-performance temperature management systems used in the testing of ICs, printed circuit boards and other subassemblies.

INDUSTRY

Overview


The semiconductor market has been characterized by rapid technological change, wide fluctuations in demand and shortening product life cycles. Designers and manufacturers of a variety of electronic and industrial products, such as cell phones, telecom and datacom systems, Internet access devices, computers and consumer electronics, require increasingly complex ICs to provide improved end-product performance demanded by their customers.

Semiconductor manufacturers generally compete based on product performance and price. We believe that testing costs represent a significant portion of the total cost of manufacturing ICs. As product life cycles shorten, semiconductor manufacturers are under more pressure to maximize production yields and reduce testing costs. At the same time, the growing complexity of ICs has increased the difficulty of maximizing test yields. In order to address these market trends, semiconductor manufacturers strive for more effective utilization of ATE, smaller test areas and increased wafer level testing.

The demand for new ATE and related equipment depends upon several factors, including the demand for products that incorporate ICs, the increasing complexity of ICs and the emergence of new IC design, production and packaging technologies. Some of the newer IC technologies include the use of 300 mm wafers in production, system-on-a-chip, or SOC, where digital, analog and memory functions are combined on a single IC, and chip scale packaging. As a result of these and other advances, semiconductor manufacturers may require additional ATE not only to handle increases in production but also to handle more sophisticated testing requirements of ICs.

 

- 3 -

 


IC Test Process


Semiconductor manufacturers typically produce ICs in multiples of several hundred on a silicon wafer which is later separated or "diced" into individual ICs. Extended leads are then attached to the individual ICs, for later connection to other electrical components, before the ICs are put in a plastic, ceramic or other protective housing. This process step is called "packaging." Wafers are tested before being diced and packaged, to ensure that only properly functioning ICs are packaged. This testing step has several names including "front-end test," "wafer test" or "wafer probe." In front-end test, a piece of equipment known as a wafer prober automatically positions the wafer under a "test head," which connects electrically to a test system. Once the good ICs have been identified, they are packaged. The packaged IC also requires testing, called "back-end test," to determine if it meets design and performance specifications. Packaged ICs are placed into a machine called a handler, which then plugs the package d ICs into an environmentally-controlled test head, which includes a test socket, for testing.

Testers range in price from approximately $500,000 to over $3.0 million each, depending primarily on the complexity of the IC to be tested and the number of test heads, typically one or two, with which each tester is configured. Probers and handlers range in price from approximately $100,000 to $500,000. A typical test floor of a large semiconductor manufacturer may have 100 test heads and 100 probers or 250 handlers supplied by various vendors for use at any one time.

Test head manipulators, also referred to as positioners, facilitate the movement of the test head to the wafer prober in front-end test, and to the handler in back-end test. Docking hardware connects the test head to the wafer prober and handler. Tester interface products provide the electrical connection between the test head and the wafer or packaged IC. Traditionally, temperature management products are used in back-end test to allow a manufacturer to test packaged ICs under the extreme temperature conditions in which the IC may be required to operate. However, we believe that temperature-controlled testing will be an increasingly important part of front-end wafer testing as the demand for front-end testing grows.

Trends in IC Testing

Although the demand for ICs and ATE has been experiencing a severe cyclical downturn, we believe that when the cycle reverses and demand for ICs increases, the ATE industry will again be required to assist IC manufacturers not only to identify unacceptable products, but also to perform the IC test in the most efficient and cost-effective manner possible. To provide testing equipment that can help manufacturers meet this goal, the ATE industry must address the following issues:

Change in Technology. Currently, most semiconductor manufacturers use 150 mm and 200 mm wafer technology. In order to increase throughput and lower IC cost, semiconductor manufacturers will need to add 300 mm wafer production capability as existing 150mm and 200mm production capacity becomes more fully utilized. In addition, end-user applications are demanding ICs with increasingly higher performance, greater speeds, and smaller sizes. ICs that meet these higher standards are more complex and dense. SOC designs are likely to have increasing demand in the future. These technology trends have significant implications for the IC testing process, including:

Need for Plug-Compatibility and Integration. Semiconductor manufacturers need test methodologies that will perform increasingly complex tests while lowering the overall cost of testing. This can require combining ATE manufactured by various companies into optimally performing systems. Semiconductor manufacturers have to work closely with various test hardware, software, interface and component vendors to resolve design and compatibility issues in order to make these vendors' products plug-compatible with test equipment manufactured by other vendors.

Testing under Extreme Conditions. ICs will have to perform across a wider spectrum of temperature and environmental conditions than ever before because of the growing complexity of products in which they are deployed. Temperature testing will likely find an increasing role in front-end, wafer level testing. Creating a uniform thermal profile over much larger wafer areas represents a significant engineering and design challenge for ATE manufacturers.

Demand for Higher Levels of Technical Support. As IC testing becomes more complex, semiconductor manufacturers are increasingly demanding higher levels of technical support on a routine basis. ATE manufacturers must commit greater resources to technical support in order to develop close working relationships with their customers. This level of support also requires close proximity of service and support centers to customers' facilities.

Cost Reduction through Increased Front-End Testing. As the cost of testing ICs increases, semiconductor manufacturers will continue to look for ways to streamline the testing process to make it more cost-effective. We believe that this factor will lead to more front-end, wafer level testing.

OUR SOLUTIONS

We focus our development efforts on designing and producing high quality products that provide superior performance and cost-effectiveness. We seek to address each manufacturer's individual needs through innovative and customized designs, use of the best materials available, quality manufacturing practices and personalized service. We design solutions to overcome the evolving challenges facing the ATE industry by providing the following advantages:

- 4 -

 

Scalable, Universal, High Performance Interface Technology. Our universal test head manipulators provide six degrees of motion freedom to enable a high degree of flexibility with the minimum amount of effort. As a result, our products can be used in virtually any test setting. Our manipulators have kept pace with the rapidly increasing size of test heads, which can weigh up to 3,000 pounds and which will become larger and heavier as the required level of testing sophistication increases. Our docking hardware offers precise control over the connection to test sockets, probing assemblies and interface boards, reducing downtime and minimizing costly damage to fragile components. We believe that these characteristics will gain even more significance as testing becomes more complicated.

Compatibility and Integration. A hallmark of our products has been, and continues to be, compatibility with a wide variety of ATE. Our universal manipulators can handle test heads produced by different manufacturers. We also design and manufacture docking hardware that can be used with otherwise incompatible ATE. We believe this integrated approach to ATE facilitates smooth changeover from one tester to another, longer lives for interface components, better test results and lower overall test costs.

Wafer Level Testing. Semiconductor manufacturers use our redesigned ThermoChuck(R) products for front-end temperature stress screening at the wafer level. This can provide significant cost savings from early identification of defective ICs that will not perform at specified temperatures thereby eliminating the costs of packaging and testing these defective ICs. ThermoChuck(R) products are capable of handling any size wafer, including a 300 mm wafer, for thermal test without causing the wafer distortion that can occur as temperature changes are introduced.

Worldwide Customer Service and Support. We have long recognized the need to maintain a physical presence near our customers' facilities. We have manufacturing facilities in New Jersey, Massachusetts, California, the U.K. and Singapore, and we provide service to our customers from 12 sales and service offices in the U.S., the U.K., Japan, Singapore and Germany. Our engineers are easily accessible to, and can work directly with, most of our customers from the time we begin developing our initial proposal through the delivery, installation and use of the product by our customer. In this way, we are able to develop and maintain close relationships with our customers.

OUR STRATEGY

Although demand for ICs and ATE has been experiencing a severe cyclical downturn, and much of our effort has been focused on reducing costs and conserving cash until the cycle reverses, we remain committed to our goal of being recognized in our industry as the designer and manufacturer of the highest quality products in our markets and to become a supplier for all of our customers' ATE needs, other than probers, handlers and testers. Our strategies to achieve these goals include the following:

Providing Technologically Advanced Solutions. We are committed to designing and producing only the highest quality products which incorporate innovative designs to achieve optimal cost-effectiveness and functionality for each customer's particular situation. Our engineering and design staff are continually engaged in developing new and improved products and manufacturing processes.

Leveraging our Strong Customer Relationships. Our technical personnel work closely with ATE manufacturers to design tester interface and docking hardware that are compatible with their ATE. As a result, we are often privy to proprietary technical data and information about these manufacturers' products. We believe that because we do not compete with ATE manufacturers in the prober, handler and tester markets, we have been able to establish strong collaborative relationships with these manufacturers that enable us to develop ancillary ATE products on an accelerated basis.

Continuing our International Expansion. Our existing and potential customers are concentrated in certain regions throughout the world. We believe that we must maintain a presence in the markets in which our customers operate. We currently have offices in the U.S., the U.K., Japan, Singapore and Germany.

Pursuing Synergistic Acquisitions. A key element of our growth strategy is to acquire businesses, technologies or products that are complementary to our current product offerings. Our TestDesign and Temptronic acquisitions have expanded our line of product offerings and given us the opportunity to market a broader range of products to our customer base. We expect to make acquisitions that will further expand our product lines, enabling us to become a single source supplier to the test floor for a complete selection of equipment compatible with testers, probers and handlers of all manufacturers.

OUR PRODUCTS

We design and manufacture manipulators, docking hardware, temperature management systems and tester interface products, all of which are designed to improve the utilization and performance of ATE used by semiconductor manufacturers in the testing of ICs. Semiconductor manufacturers mainly use our primary lines of manipulators and docking hardware during back-end testing of specialized packaged ICs. They use our temperature management systems and tester interface products in both front-end and back-end testing of ICs. These ICs include microprocessors, digital signal processing chips, application specific ICs and specialized memory ICs, and are used primarily in the automotive, computer, consumer products and telecommunications industries. We custom design most of our products for each customer's particular combination of ATE. We have designed over 5,000 models, each of which is mechanically different. These models are designed to facilitate the use of one or more of over 175 different test heads with one or more of over 30 probers or 300 handlers.

 

- 5 -




Manipulator Products

Our manipulator products consists of the in2(R) and in2 Pro test head positioners, which are free-standing universal manipulators. Universal manipulators can hold a variety of test heads and enable an operator to reposition a test head for alternate use with any one of several probers or handlers on a test floor. The in2(R) and in2 Pro differ from universal manipulators manufactured by our competitors by our innovative, patented floating-head design. This design permits a test head weighing up to 3,000 pounds to be held in an effectively weightless state, so it can be moved manually or, in the case of the in2 Pro, with optional powered assistance, up or down, right or left, forward or backward and rotated around each axis (known as six degrees of motion freedom) by an operator using a modest amount of force. The same design features enable the operator to dock the test interface board without causing inadvertent damage to the fragile electrical contacts. As a result, after testing a particular production lot of ICs, the operator can quickly and easily disconnect a test head held in an in2(R) or in2 Pro manipulator and equipped with our docking hardware and dock it to another handler for testing either a subsequent lot of the same packaged IC or to test a different IC. in2(R) and in2 Pro manipulators range in price from approximately $12,000 to $159,000.

Docking Hardware Products

Our docking hardware products ensure proper alignment of the delicate interface between the test head's interface board and the prober's probing assembly or the handler's test socket as they are brought together, or "docked." A simple cam action docks and locks the test head to the prober or handler, thus eliminating motion of the test head relative to the prober or handler. This minimizes deterioration of the interface boards, test sockets and probing assemblies which is caused by the constant vibration during testing. Our docking hardware products are used primarily with floating-head universal manipulators when maximum mobility and inter-changeability of handlers between test heads is required. By using our docking hardware products, semiconductor manufacturers can achieve cost savings through improved ATE utilization, improved accuracy and integrity of test results, and reduced repairs and replacements of expensive ATE interface products.

Our docking hardware products differ from those offered by competing ATE manufacturers by our ability to make various competing brands of test heads compatible with various brands of probers and handlers used by a semiconductor manufacturer by only changing interface boards. This is called "plug-compatibility." Plug-compatibility enables increased flexibility and utilization of test heads, probers and handlers purchased from various manufacturers. We believe that because we do not compete with ATE manufacturers in the sale of probers, handlers or testers, ATE manufacturers are willing to provide us with the information that is integral to the design of plug-compatible products. Our docking hardware products range in price from approximately $2,000 to $25,000.

Temperature Management Systems

Our temperature management systems enable a manufacturer to test a semiconductor wafer or IC over the extreme and variable temperature conditions that can occur in the actual use of the electronic device containing the ICs.

ThermoChuck(R) Products: Our ThermoChuck(R) precision vacuum platform assemblies quickly change and stabilize the temperature of semiconductor wafers during testing without removing the wafer from its testing environment. Such temperatures can range from as low as -65 degrees Celsius to as high as +400 degrees Celsius. ThermoChucks(R) are incorporated into wafer prober equipment for laboratory analysis and for in-line production testing of semiconductor wafers. ThermoChuck(R) products range in price from approximately $14,000 to $75,000.

ThermoStream(R) Products: Our ThermoStream(R) stand-alone temperature management systems use a temperature-controlled air stream to rapidly change and stabilize the temperature of packaged ICs and printed circuit boards. ThermoStream(R) products provide a source of heated and cooled air which can be directed over the component or device under test. These systems are capable of controlling temperatures to within +/- 0.1 degree Celsius over a range of -75 degrees Celsius to as high as +225 degrees Celsius within 1.0 degree Celsius of accuracy. Traditionally, our customers used ThermoStream(R) products primarily in engineering, quality assurance and small-run manufacturing environments. However, increasingly, our customers use ThermoStream(R) products in longer-run production applications. ThermoStream(R) products range in price from approximately $4,500 to $40,000.

Other Temperature Management Products: We also manufacture ancillary temperature management products including temperature-controlled contact probes, temperature-controlled enclosures, and precision temperature platforms. Recent developments in wireless communications have resulted in the mounting of wireless transmitters outdoors to reduce transmission line problems. As a result, these transmitters are exposed to extreme temperature variations and require testing over the full range of temperature exposure that will be encountered. Historically, the standard approach to this type of testing has been to use conventional thermal chambers, which can require removing equipment during testing and potentially cause damage to the sensitive microwave cables or create erroneous measurements. Our other temperature management products can be used to provide a closed, temperature-controlled environment for temperature testing of high frequency transmitters and receivers without the need for removal during testin g, eliminating the risk of damage due to interruption of the test.

Tester Interface Products

Tester interface products provide the electrical connections between the tester and the wafer prober or IC handler to carry the electrical signals between the tester and the probe card on the prober or the test socket on the handler. Our designs optimize the integrity of the transmitted signal which increases the accuracy of the test data. Therefore, our tester interface products can be used with high speed, high frequency, digital or mixed signal interfaces used in testing more complex ICs. Because our tester interface products enable the tester to provide more reliable yield data, our interfaces may also reduce IC production costs. We offer over 200 different types of tester interface models that we custom designed for our customers' specific applications. These products range in price from $6,000 to $51,000.

-6-

 


Integrated Products


In 2001, we introduced our integrated solutions product group. The primary focus of this new group is to integrate products from one or more of our product segments into value-added testing solutions. We can design and integrate a complete electro-mechanical system for probe and final test applications, including manipulator, docking system, tester interface and temperature control components. Integrated products range in price from $65,000 to $140,000.

Financial Information About Product Segments and Geographic Areas

Please refer to Note 3 of our consolidated financial statements included in this Report for additional data regarding each of our product segments and revenues attributable to foreign countries.

MARKETING, SALES AND CUSTOMER SUPPORT

We market and sell our products in all markets where the manufacture of semiconductors occurs. North American and European semiconductor manufacturers have located most of their back-end factories in Southeast Asia. The front-end wafer fabrication plants of U.S. semiconductor manufacturers are primarily in the U.S. Likewise, European, Taiwanese, South Korean and Japanese semiconductor manufacturers generally have located their wafer fabrication plants in their respective countries.

Manipulator, Docking Hardware and Tester Interface Products: In North America, we sell to semiconductor manufacturers principally through independent, commissioned sales representatives. North American sales representatives also coordinate product installation and support with our technical staff and participate in trade shows.

Our regional and account managers handle sales to ATE manufacturers and are responsible for a portfolio of customer accounts and for managing certain independent sales representatives. In addition, our account managers are responsible for pricing, quotations, proposals and transaction negotiations, and they assist with applications engineering and custom product design. Technical support is provided to North American customers and independent sales representatives by employees based in New Jersey, California, Texas and Arizona.

In Europe and Japan, we sell to semiconductor and ATE manufacturers through our account managers. In China, Hong Kong, Malaysia, the Philippines, South Korea, Taiwan and Thailand, we sell through independent sales representatives. International sales representatives are responsible for sales, installation, support and trade show participation in their geographic market areas.

Temperature Management Systems: Sales to ATE manufacturers are handled directly by our own sales force. Sales to semiconductor manufacturers in the U.S. are handled through independent sales representative organizations. In Asia, our sales to semiconductor manufacturers are handled through distributors. In Europe, sales managers at our offices in Germany and the U.K., as well as regional distributors, sell direct to semiconductor manufacturers. Our distributors represent us in 30 countries. We visit our distributors regularly and have trained them to sell and service all of our temperature management products.

CUSTOMERS

We market all of our products to semiconductor manufacturers and ATE manufacturers. In the case of temperature management products, we also market our products to independent testers of semiconductors, manufacturers of electronic products, and semiconductor research facilities. Our customers use our products principally in production testing, although our ThermoStream(R) products traditionally have been used largely in engineering development and quality assurance. We believe that we sell to most major semiconductor manufacturers in the world.

Our largest customers include:

Semiconductor Manufacturers

ATE Manufacturers

Texas Instruments

Agilent Technologies (formerly Hewlett Packard)

ST Microelectronics

Cascade Microtech

Boeing Satellite Systems

Teradyne, Inc.

Agere Systems (formerly the Microelectronics Group of

Electroglas

   Lucent Technologies)

Analog Devices

 

MANUFACTURING AND SUPPLY

Our principal manufacturing operations consist of assembly and testing at our facilities in New Jersey, Massachusetts, California, the U.K., and Singapore. By maintaining manufacturing facilities and technical support in geographic markets where most of our customers are located, we believe that we are able to respond more quickly and effectively to our customers' needs. During the first quarter of 2001, we expanded our Thame, U.K. operation. During the second quarter of 2001, we moved both our Temptronic operation in Massachusetts and our Singapore operation to larger facilities.

- 7 -

We assemble most of our products from a combination of standard components and custom parts that have been fabricated to our specifications by either third party manufacturers or our own fabrication operations in New Jersey, California and the U.K. Our practice is to use the highest quality raw materials and components in our products. The primary raw materials used in fabricated parts are all widely available. We purchase substantially all of our components from multiple suppliers. Although we purchase certain raw materials and components from single suppliers, we believe that all materials and components are available in adequate amounts from other sources.

We conduct inspections of incoming raw materials, fabricated parts and components using sophisticated measurement equipment. This includes testing with coordinate measuring machines in New Jersey, Massachusetts, the U.K. and Singapore to ensure that products with critical dimensions meet our specifications. We have designed our inspection standards to comply with applicable MIL specifications and ANSI standards. We recently obtained ISO 9001 certification at our New Jersey facility and are in the process of applying for similar certification for our California and Massachusetts operations.

ENGINEERING AND PRODUCT DEVELOPMENT

Our success depends on our ability to provide our customers with products and solutions that are well engineered, and to design those products and solutions before, or at least no later than, our competitors. As of December 31, 2001, we employed a total of 42 engineers, who were engaged full time in engineering and product development. Our practice in many cases is to assign engineers to work with specific customers, thereby enabling us to develop the relationships and free exchange of information that is most conducive to successful product development and enhancement. In addition, some of our engineers are assigned to new product research and development and have worked on such projects as the redesign of the ThermoChuck(R) and the development of several new types of universal manipulators.

Since most of our products are customized, we consider substantially all of our engineering activities to be engineering and product development. We spent approximately $6.1 million in 2001, $6.6 million in 2000, and $4.9 million in 1999 on engineering and product development.

PATENTS AND OTHER PROPRIETARY RIGHTS

As of December 31, 2001, we held 27 U.S. patents and had pending 20 U.S. patent applications covering various aspects of our technology. Our U.S. issued patents will expire at various times beginning in 2002 and extending through 2018. We also hold foreign patents and file foreign patent applications, in each case derived from our U.S. patents, to the extent management deems appropriate.

Our policy is to protect our technology by filing patent applications for the technologies that we consider important to our business. We also rely on trade secrets and unpatentable know-how to protect our proprietary rights. It is our practice to require, as a condition of permanent employment, that all of our employees agree to assign to us all rights to inventions or other discoveries relating to our business made while employed by us. In addition, all employees agree not to disclose any private or confidential information relating to our technology or intellectual property.

COMPETITION

Our competitors include independent manufacturers, ATE manufacturers and, to a lesser extent, semiconductor manufacturers' in-house ATE interface groups. Competitive factors in our market include product performance, price, functionality, reliability, customer service, applications support, and timely product delivery. We believe that our long-term relationships with the industry's leading semiconductor manufacturers and other customers, and our commitment to and reputation for providing high quality products are important elements in our ability to compete effectively in all of our markets.

The independent manufacturers of docking hardware and manipulators that compete with us include Reid-Ashman Manufacturing and Microhandling GmbH, both of which manufacture docking hardware and manipulators. The ATE manufacturers that compete with us in the sale of docking hardware and universal manipulators include Credence Systems, LTX, Schlumberger and Teradyne, who are also our customers.

Our principal competitors for temperature management products are Thermonics, Trio-Tech International and ERS Elektronik GmbH. The independent manufacturers of tester interface products that compete with us include Cerprobe, a division of Kulicke & Soffa, Synergetix, a division of IDI, and Xandex. ATE manufacturers that compete with us in the sale of tester interface products include Credence Systems, LTX and Teradyne.

BACKLOG

At December 31, 2001, our backlog of unfilled orders for all products was approximately $10.6 million compared with approximately $22.3 million at December 31, 2000. Our backlog includes customer purchase orders which we have accepted, substantially all of which we expect to deliver in the current fiscal year. While backlog is calculated on the basis of firm purchase orders, a customer may cancel an order or accelerate or postpone currently scheduled delivery dates. As a result, our backlog at a particular date is not necessarily indicative of sales for any future period.

EMPLOYEES

At December 31, 2001, we had 229 full time employees, including 100 in manufacturing operations, 99 in customer support/operations and 30 in administration. Substantially all of our key employees are highly skilled and trained technical personnel. None of our employees is represented by a labor union, and we have never experienced a work stoppage. We believe that our relationship with our employees is very good.

-8-

inTEST Corporation
Annual Report on Form 10-K

Item 2:   PROPERTIES

At December 31, 2001, we leased 11 facilities worldwide. During the first quarter of 2001, we expanded our Thame, U.K. operation. We moved both our Temptronic operation in Massachusetts and our Singapore operation to larger facilities during the second quarter of 2001. We believe that additional space to meet our current and foreseeable future needs is readily available.

The following chart provides information regarding each of our principal facilities which we occupied at December 31, 2001.



Location


Lease
Expiration

Approx.
Square
Footage



Principal Uses

Cherry Hill, NJ

9/10

121,700

Corporate headquarters and design, manufacturing, service
  and sales -- manipulator and docking hardware products.

Sharon, MA

2/11

62,400

Design, manufacturing, service and sales -- temperature
  management systems.

Sunnyvale, CA

12/04

18,300

Design, manufacturing, service and sales -- tester interface
  products

 

Item 3:   LEGAL PROCEEDINGS

From time to time we are a party to legal proceedings. We are not currently involved in any material legal proceedings the resolution of which could have a material effect on our business, our financial position or our results of operations. On December 15, 2000, however, we filed a complaint in the U.S. District Court for the District of Delaware against Credence Systems Corporation claiming infringement of our U.S. patent number 4,589,815 and seeking damages and injunctive relief. Since that time, we commenced the process of discovery, which process is ongoing, and through which we will quantify our damages. We do not believe that this action will have a material effect on our business, financial condition or results of operations.

Item 4:   SUBMISSIONS OF MATTERS TO A VOTE OF SECURITY HOLDERS

No matters were submitted to a vote during the fourth quarter of 2001.


PART II:

Item 5:   MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS

Our common stock is traded on the Nasdaq National Market under the symbol "INTT." The following table sets forth the high and low sale prices of our common stock, as reported on the Nasdaq National Market, for the periods indicated. Sale prices have been rounded to the nearest full cent.

 

Sales Price

 

High

Low

2000

 

 

First Quarter

$26.25

$16.44

Second Quarter

24.50

14.00

Third Quarter

18.88

8.00

Fourth Quarter

11.13

5.00

 

 

 

2001

 

 

First Quarter

$10.75

$  6.00

Second Quarter

9.00

5.38

Third Quarter

6.45

2.88

Fourth Quarter

5.15

2.44

- 9 - 

 

inTEST Corporation
Annual Report on Form 10-K


Item 5:
  MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS (Continued)

On March 15, 2002, the closing price for our common stock as reported on the Nasdaq National Market was $5.41. As of March 15, 2002, we had 8,685,205 shares outstanding that were held of record by approximately 1,000 shareholders.

We have not paid dividends on our common stock since our initial public offering, and we do not plan to pay cash dividends in the foreseeable future. Our current policy is to retain any future earnings for reinvestment in the operation and expansion of our business, including possible acquisitions of other businesses, technologies or products. Payment of any future dividends will be at the discretion of our board of directors. In addition, our current credit agreement prohibits us from paying cash dividends without the lender's prior consent.


Item 6:
  SELECTED FINANCIAL DATA

The following table contains certain selected consolidated financial data of inTEST and is qualified by the more detailed Consolidated Financial Statements and Notes thereto included elsewhere in this Annual Report on Form 10-K and should be read in conjunction with "Management's Discussion and Analysis of Financial Condition and Results of Operations" and the other financial information included in this Annual Report on Form 10-K.

 

Years Ended December 31,

 

2001

2000

1999

1998

1997

 

(in thousands, except per share data)

Condensed Consolidated Statement of Operations Data:

 

 

 

 

 

Net revenues

$51,627 

$87,651

$53,585

$36,058

$40,014

Gross margin

12,711 

39,556

26,710

17,188

20,914

Operating income (loss)

(14,689)

10,909

7,327

2,076

5,840

Net earnings (loss)

(11,329)

6,379

6,133

1,058

4,223

Net earnings (loss) per common share (1997 information
  is pro forma):

 

 

 

 

 

     Basic

(1.37)

.78

.76

.14

.55

     Diluted

(1.37)

.75

.74

.14

.54

Weighted average common shares outstanding (1997
  information is pro forma)

 

 

 

 

 

     Basic

8,279 

8,201

8,084

7,669

6,531

     Diluted

8,279 

8,470

8,266

7,822

6,697

 

As of December 31,

 

2001

2000

1999

1998

1997

 

(in thousands)

Condensed Consolidated Balance Sheet Data:

 

 

 

 

 

Cash and cash equivalents

$ 7,281

$ 5,680

$12,047

$ 8,637

$12,138

Working capital

20,146

26,768

20,784

15,068

16,826

Total assets

31,768

47,302

43,015

32,556

31,290

Long-term debt, less current portion

296

-

133

262

427

Total stockholders' equity

27,204

38,398

31,458

25,062

21,037

 

The 1997 net earnings per common share and weighted average share data are presented on a pro forma basis to reflect our results as if we had been taxed as a C corporation for all of 1997 and as if we had acquired our minority interests in three foreign subsidiaries on January 1, 1997, rather than on June 20, 1997, the actual date of acquisition.

The selected financial data gives retroactive effect to our merger with Temptronic Corporation on March 9, 2000. The merger was accounted for using the pooling-of-interests method of accounting.

 

- 10 -

inTEST Corporation
Annual Report on Form 10-K


Item 7:
  MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

Overview

Our business and results of operations are substantially dependent upon the demand for ATE by semiconductor manufacturers and companies that specialize in the testing of ICs. Demand for ATE is driven by semiconductor manufacturers that are opening new, or expanding existing, semiconductor fabrication facilities or upgrading existing equipment, which in turn is dependent upon the current and anticipated market demand for semiconductors and products incorporating semiconductors. The semiconductor industry has been highly cyclical with recurring periods of oversupply, which often have a severe impact on the semiconductor industry's demand for ATE, including the products we manufacture. This cyclicality has been clearly demonstrated during the past six years, with downward cycles in 1996, 1998 and 2001 and up cycles in 1997 and 1999-2000.

The most recent downturn, which began during the fourth quarter of 2000, is the most severe downturn the ATE industry has ever experienced. Our consolidated quarterly net revenues have declined from a peak of $24.5 million for the quarter ended September 30, 2000 to $7.4 million for the quarter ended December 31, 2001, a decline of approximately 70%. The decrease we have experienced in net revenues during 2001 is comparable to the peak to trough differences being experienced by most of the companies in our industry. The approximate peak to trough percentage decline in quarterly net revenues by product segment is 92% in the tester interface segment, 75% in the manipulator/docking hardware segment and 51% in the temperature management segment. We believe the larger percentage declines in the net revenues of our tester interface segment are primarily due to the fact that these product sales are driven predominantly by semiconductor manufacturers' additions to production capacity, which essentially ceased during 2001. We believe the smaller percentage decline in the net revenues of our temperature management segment are the result of demand for certain products of this segment used in the research and product development projects of semiconductor manufacturers, which have not declined significantly during 2001.

Our net new orders booked ("bookings") for 2001 were $42.6 million compared to $98.1 million for 2000, a decline of $55.5 million or 57%. Our consolidated quarterly bookings have declined from a peak of $26.5 million for the quarter ended September 30, 2000 to $6.1 million for the quarter ended September 30, 2001, a decline of approximately 77%. The peak to trough percentage decline in quarterly bookings by product segment is consistent with the declines in net revenues discussed above. In addition to the decline in our bookings, many of our customers delayed shipments of previously ordered products until 2002 or cancelled their orders. As a result, our backlog declined from $22.3 million at December 31, 2000 to $10.6 million at December 31, 2001. Bookings for the quarter ended December 31, 2001 were $6.3 million, a 4% increase from the prior quarter and the first sequential quarterly increase in five quarters. The current industry consensus is that a recovery will not occur until the second half of 2002, an d we see nothing in our business to contradict this assessment. We cannot be sure as to the length and depth of this current downturn or when the next cyclical growth phase will occur or the rate at which it will accelerate.

In response to the severe downturn, we implemented significant cost containment initiatives during 2001 to reduce operating losses and preserve cash. These initiatives were completed in several stages as the magnitude of the downturn became more apparent throughout 2001. The most significant cost reduction was in personnel, where we reduced headcount by 38% or 144 people. In addition, we implemented a temporary 10% reduction in compensation for all worldwide employees as well as a temporary elimination of company contributions to retirement plans for all domestic employees. Significant reductions were also made in corporate travel, advertising, professional services and supplies. The result of our cost containment efforts is reflected in the level of operating expenses, which declined from $7.3 million for the quarter ended December 31, 2000 to $4.5 million for the quarter ended December 31, 2001. The goal of these initiatives was to reduce fixed operating costs to a level which, based on current revenue pro jections, would allow us to maintain our present level of cash while still continuing our research and development programs and positioning ourselves such that, when the market improves, we are able to be a prime supplier for both new and existing technologies developed by our customers. However, given the uncertainty of the continued severity of the industry downturn, we cannot be certain that the actions we have taken to date will be sufficient for us to accomplish this goal.

We sell our products to both semiconductor manufacturers (end user sales) and to ATE manufacturers (OEM sales) who ultimately resell our equipment with theirs to semiconductor manufacturers. The mix of customers during any given period will affect our gross margin due to differing sales discounts and commissions. Historically, the majority of our manipulator, docking hardware and tester interface product sales have been made directly to semiconductor manufacturers, with sales to these end users typically in the range of 65% to 75% of our net revenues. However, since the beginning of 2000, many semiconductor manufacturers have begun to show a preference for purchasing from a single source the various components of the ATE (excluding temperature management systems) that they need. Typically, this source is the tester manufacturer, who manufacturers the largest and most expensive components of the ATE system. As evidence of this trend, our OEM sales as a percentage of net revenues for the years ended December 3 1, 1999, 2000 and 2001 were 33%, 41% and 54%, respectively, for manipulator/docking hardware products and 21%, 42% and 70%, respectively, for tester interface products. These increases in OEM sales as a percentage of net revenues in these two segments have been offset by a decrease in OEM sales in our temperature management segment, which decreased for the years ended December 31, 2000 and 2001 from 45% to 32%, respectively. We anticipate that OEM sales as a percentage of net revenues may continue to increase in the future for our manipulator/docking hardware and tester interface product segments. The impact of this increase in OEM sales as a percentage of net revenues is a reduction in our gross margin, as OEM sales have a more significant discount than end user sales. Our current net operating margins on most OEM sales for these product segments, however, are only slightly less than margins on end user sales because of the payment of third party sales commissions on most end user sales. We also expect to c ontinue to experience demands from our OEM customers' supply line management groups to reduce our sales prices to them. This continued price pressure may have the ultimate effect of reducing our gross and operating margins if we cannot reduce our manufacturing and operating costs.

- 11 -






We believe that purchases of most of our products are typically made from the semiconductor manufacturers' capital expenditure budgets. Certain portions of our business, however, are generally less dependent upon the capital expenditure budgets of the end users. For example, purchases of certain related ATE interface products, such as sockets and interface boards, which must be replaced periodically, are typically made from the end users' operating budgets. In addition, purchases of certain of our products, such as docking hardware, for the purpose of upgrading, or to improve the utilization, performance and efficiency of, existing ATE tend to be counter cyclical to sales of new ATE. Moreover, we believe a portion of our sales of temperature management products results from the increasing need for temperature testing of circuit boards and specialized components that do not have the design or quantity to be tested in a handler. We believe that this business is less cyclical than new ATE sales. However, during the current downward cycle we have seen our customers' orders for these types of products decline as much, or in some cases, more than the other products we offer as compared with prior periods of reduced capital spending for ATE. We attribute this in part to reductions in our customers' operating budgets combined with significant excess capacity that we believe exists throughout the industry. We believe that much of this excess capacity is the result of capital equipment purchases made during the recent, prolonged expansion experienced by the industry, and therefore, this newer equipment does not need to be upgraded or improved.

Please refer to the section entitled "Risks That Could Affect Future Results" below for a discussion of other important factors that could cause our results to differ materially from our prior results or those expressed or implied by our forward-looking statements.

Results of Operations

All of our products are used by semiconductor manufacturers in conjunction with ATE in the testing of ICs. Consequently, the results of operations for each product segment are generally affected by the same factors. Separate discussions and analyses for each product segment would be repetitive and obscure any unique factors that affected the results of operations of our different product segments. The discussion and analysis that follows, therefore, is presented on a consolidated basis for the company as a whole and includes discussion of factors unique to each product segment where significant to an understanding of such business.

Year Ended December 31, 2001 Compared to Year Ended December 31, 2000

Net Revenues.
Net revenues were $51.6 million for 2001 compared to $87.7 million for 2000, a decrease of $36.1 million or 41%. While the manipulator/docking hardware and tester interface segments' net revenues decreased $19.6 million or 49% and $8.7 million or 59%, respectively, during 2001 as compared to 2000, the net revenues for the temperature management segment decreased by only $7.8 million or 23% in 2001 as compared to 2000. We believe that the decrease in net revenues for all of our product segments reflects the severe cyclical downturn in demand for ATE in 2001 as compared to 2000. However, we attribute the smaller percentage decrease in the net revenues of our temperature management segment to continued demand for our Thermostream(R) products which partially offset the effects of the current downturn on this product segment.

Gross Margin. Gross margin decreased to 25% in 2001 from 45% in 2000. We attribute the decrease in gross margin to several factors including the $3.4 million write-down of obsolete inventory during 2001. This inventory write-down was made as a result of the continued downturn in our industry, which has caused items in our inventory to become obsolete. Excluding this write-down, gross margin for 2001 was 31%. For our manipulator/docking hardware and tester interface segments, the decline is primarily the result of a reduction in the absorption of fixed operating costs due to the significantly lower levels of revenue in 2001 compared to 2000 and an increase in component material costs as a percentage of net revenues. The increase in component material costs as a percentage of net revenues is primarily the result of an increase in OEM sales as a percentage of total sales, as previously discussed, as well as increases in the cost of aluminum which is a significant raw material component used in these prod ucts. In addition, for our manipulator/docking hardware segment, the decline in gross margin is also the result of increases in fixed operating costs due to facility expansions in the U.S., the U.K. and Singapore. We believe this increased capacity adequately addressed the capacity constraints that impacted product shipments during most of 2000. For temperature management products, the decline in gross margin was the result of higher component material costs and increases in fixed operating costs. The higher fixed operating costs are due to a facility expansion in early 2001, and were partially offset by a decrease in salaries due to headcount reductions in the operations area.

Selling Expense. Selling expense was $8.8 million for 2001 compared to $11.7 million for 2000, a decrease of $2.9 million or 25%. We attribute the decrease primarily to decreased commission expense due to the lower sales levels. In addition, salaries, travel and advertising expenditures decreased in 2001 as compared to 2000, primarily as a result of the implementation of our cost containment program.

Engineering and Product Development Expense. Engineering and product development expense was $6.1 million for 2001 compared to $6.6 million for 2000, a decrease of $444,000 or 7%. We attribute the decease primarily to reduced salary expense resulting from the cost containment program. In addition, our expenditures for research and development materials and travel decreased in our tester interface product segment. These decreases were offset partially by an increase in spending on third party consultants involved in various product development programs.

 

- 12 -

 

 

General and Administrative Expense. General and administrative expense was $7.9 million for 2001 compared to $7.3 million, an increase of $629,000 or 9%. We attribute the increase primarily to an increase in salary expense resulting from the accrual of separation payments to be made based upon a prior contractual arrangement with a former executive of a subsidiary. In addition, there were increases in both legal and audit expenses. These increases were partially offset by decreases in profit-related bonuses, reductions in salaries for remaining employees, bad debt recoveries, reductions in directors' fees and reduced spending on supplies.

Impairment of Goodwill. In accordance with Statement of Financial Accounting Standards ("SFAS") No. 121, Accounting for the Impairment of Long-Lived Assets and for Long-Lived Assets to be Disposed Of, when events or circumstances so indicate, we assess the potential impairment of our intangible assets and other long-lived assets based on anticipated undiscounted cash flows from operations. Such events and circumstances include a sale of all or a significant part of the operations associated with the long-lived asset or a significant decline in the operating performance of the asset. The amount of the impairment charge, if any, is calculated by comparing the anticipated discounted future cash flows to the carrying value of the long-lived asset.

We performed an impairment assessment of our goodwill as of September 30, 2001, due to the current industry downturn. As a result of this assessment, a $4.6 million impairment charge was recorded for the goodwill associated with the acquisition of TestDesign, which was the net book value of this goodwill as of that date. No impairment was indicated for the goodwill that is associated with the acquisition of three of our foreign subsidiaries, which had a net book value of $933,000 at December 31, 2001.

Merger-related Costs. Merger-related costs totaling $2.7 million were recorded during 2000 as a result of our merger with Temptronic Corporation. There were no merger-related costs during 2001.

Write-off of Deferred Offering Costs. During September 2000, we withdrew our registration statement for the offering of 2.0 million shares of our common stock, 1.0 million of which were to be offered by us and 1.0 million by certain of our stockholders. Approximately $415,000 of costs related to the withdrawn offering, which consisted primarily of professional fees, printing costs and roadshow costs, were expensed during the third quarter of 2000.

Other Income. Other income was $551,000 for 2001 compared to $670,000 for 2000, a decrease of $119,000 or 18%. The decrease in other income is primarily the result of the $280,000 reduction in interest income, resulting from lower average cash balances and lower interest rates. This decrease was partially offset by an increase in third party royalty income from the licensing of our intellectual property.

Income Tax Expense (Benefit). Income tax benefit was $2.8 million for 2001 compared with income tax expense of $5.2 million for 2000. Our effective tax rate for 2001 was 20% primarily as the result of the recording of a $4.6 million charge for impairment of goodwill, which is not deductible for tax purposes. The 2000 effective tax rate was 45%, primarily due to $2.3 million of non-tax deductible merger-related costs.

Year Ended December 31, 2000 Compared to Year Ended December 31, 1999

Net Revenues. Net revenues were $87.7 million for 2000 compared to $53.6 million for 1999, an increase of $34.1 million or 64%. We believe that the significant increase in net revenues over the comparable prior period was principally the result of growth in the demand for ATE that continued through most of 2000 as compared to 1999.

Gross Margin. Gross margin decreased to 45% in 2000 from 50% in 1999. The decline in gross margin was primarily the result of increased material costs coupled with higher levels of fixed manufacturing costs and, to a lesser extent, for manipulator and docking hardware products as well as tester interface products, an increase in the percentage of OEM sales in 2000 compared to 1999. The increase in material costs was mainly the result of a significant inventory write-down due to obsolescence and, to a lesser extent, higher costs to purchase certain component materials, such as aluminum, as well as increases in fabrication costs. The inventory write-down was made against certain discontinued product lines, as well as other products where we did not see significant future demand relative to inventory levels. We believe the increase in fabrication costs was the result of higher demand for fabrication in most of the markets where we operate. The increase in fixed manufacturing costs was primarily the resul t of increased levels of salary expense due to additional operations staff hired in late 1999 and 2000 in response to increased business activity as well as salary increases for existing staff, combined with higher facility and depreciation costs primarily resulting from the relocation of certain of our manufacturing facilities in the U.S. in order to significantly increase our manufacturing capacity. The decline in gross margin was partially offset by the absorption of fixed manufacturing costs over significantly higher net revenue levels in 2000 compared to 1999.

Selling Expense. Selling expense was $11.7 million for 2000 compared to $8.4 million for 1999, an increase of $3.3 million or 39%. We attribute the increase primarily to increased commission expense related to the higher sales levels in 2000, as well as higher levels of salary and benefits expense for new and existing staff. To a lesser extent, higher levels of warranty expense, travel costs, freight and advertising expenditures also contributed to the increase in selling expense.

Engineering and Product Development Expense. Engineering and product development expense was $6.6 million for 2000 compared to $4.9 million for 1999, an increase of $1.7 million or 35%. We attribute the increase primarily to the salary and benefits expense of additional engineering and technical staff and, to a lesser extent, increased spending on product development materials and fees for technical consultants associated with new product development.

- 13 -

 

General and Administrative Expense. General and administrative expense was $7.3 million for 2000 compared to $6.1 million for 1999, an increase of $1.2 million or 19%. We attribute the increase primarily to increases in incentive compensation for existing staff and, to a lesser extent, increases in professional fees and travel costs. These increases were partially offset by the receipt of $300,000 in settlement of patent infringement litigation, which was recorded as a reduction of legal expense.

Merger-related Costs. Merger-related costs resulting from our merger with Temptronic Corporation were $2.7 million, which consisted primarily of fees paid to investment bankers, professional fees, printing, escrow and other miscellaneous costs.

Write-off of Deferred Offering Costs. During September 2000, we withdrew our registration statement for the offering of 2.0 million shares of our common stock, 1.0 million of which were to be offered by us and 1.0 million by certain of our stockholders. Approximately $415,000 of costs related to the withdrawn offering, which consisted primarily of professional fees, printing costs and roadshow costs, were expensed during the third quarter of 2000.

Other Income (Expense). Other income (expense) was $670,000 for 2000 compared to $231,000 for 1999, an increase of $439,000 or 190%. We attribute the increase to the reduction in interest expense resulting from debt retirements early in 2000, combined with an increase in interest income in 2000 from higher average balances of cash and cash equivalents in 2000 compared to 1999 and an increase in other miscellaneous income.

Income Tax Expense. Income tax expense increased to $5.2 million for 2000 from $1.4 million for 1999. Our effective tax rate for 2000 was 45% compared to 19% for 1999. The significant increase in the effective tax rate was primarily due to $2.3 million of non-tax deductible merger-related costs incurred in 2000, which significantly increased the 2000 effective tax rate, combined with a $1.4 million reduction in the valuation allowance in 1999, which significantly reduced the 1999 effective tax rate. The reduction in the valuation allowance was based on management's assessment of our ability to realize the deferred tax assets.

Liquidity and Capital Resources

Net cash provided by operations for the year ended December 31, 2001 was $3.9 million. Accounts receivable decreased $9.4 million from December 31, 2000 to December 31, 2001 due to the industry downturn throughout 2001. Inventories decreased $5.0 million, primarily as the result of the write-down of obsolete inventory in 2001. Net domestic and foreign income taxes increased by $2.0 million, primarily as the result of the operating losses incurred during 2001. We expect to receive a tax refund of approximately $2.4 million during the first half of 2002. Accounts payable decreased $2.6 million due to lower production levels during 2001. Accrued expenses decreased $1.5 million as a result of the payment of previously accrued expenses including sales commissions, incentive compensation and merger-related costs.

Purchases of machinery and equipment were $2.4 million for the year ended December 31, 2001, which consisted primarily of improvements to our facilities in the U.K., Singapore and Massachusetts. We also acquired an additional coordinate measuring machine for our Cherry Hill, New Jersey facility under a capital lease. During the first half of 2001, we relocated our U.K. manufacturing operation to a new facility and converted the previous facility to a machine shop; we spent approximately $507,000 for tenant improvements, furniture and new machining equipment. We relocated our Singapore subsidiary during April 2001 and spent approximately $121,000 on leasehold improvements and purchases of furniture and equipment for this facility. During May 2001, we relocated our Temptronic subsidiary and spent approximately $1.2 million on leasehold improvements and purchases of furniture and equipment for this facility. Our lease on this facility entitles us to a reimbursement of approximately $280,000, which we expect to receive during 2002. During June 2001, we spent approximately $183,000 on new equipment for our Sunnyvale facility.

Net cash provided by financing activities for the year ended December 31, 2001 was $357,000, including approximately $216,000 for equipment that was refinanced under a capital lease and approximately $100,000 of proceeds from the exercise of stock options granted to employees.

Our total committed contracts that will affect cash over the next five years and beyond are as follows:

 

                        Expected Cash Payments By Year                          
($ in thousands)


Contractual Commitments


2002


2003


2004


2005

2006 &
Beyond


Total
  

Capital lease obligations

$    105

$    105

$    105

$    104

$     17

$    436

Operating lease obligations

1,895

1,814

1,708

1,325

6,245

12,987

Letters of credit

    200

          -

          -

          -

         -

    200

 

$2,200

$1,919

$1,813

$1,429

$6,262

$13,623

 

As of December 31, 2001, we have a $5.0 million committed, unsecured line of credit, of which $4.8 million was available to borrow (the $5.0 million committed amount less $200,000 in letters of credit we have issued to third parties under this line). This line of credit is due to expire September 30, 2002. We are currently negotiating with the bank which issued this line of credit to modify this facility to extend the maturity for a period of two years. We expect that the amended agreements will provide for the granting of a security interest in most of our domestic assets and the addition of certain negative covenants.

- 14 -

 

 

We believe that our existing cash balances and line of credit plus the anticipated net cash provided from operations will be sufficient to satisfy our cash requirements for the foreseeable future. However, we have been experiencing operating losses due to the severe industry downturn. Should the current industry downturn continue for longer than anticipated, or be more severe than we currently project, and we are unable to further significantly reduce our fixed operating expenses, we may require additional equity or debt financing to meet working capital requirements or capital expenditure needs. We cannot determine with certainty that, if needed, we would be able to raise additional funding through either equity or debt financing. We do not anticipate paying dividends in the foreseeable future. Under the terms of our current credit agreement, any payment of dividends would require the prior consent of the lender.


New Accounting Pronouncements

In June 2001, the Financial Accounting Standards Board ("FASB") issued SFAS No. 141, Business Combinations. SFAS No. 141 requires the use of the purchase method of accounting for business combinations initiated after June 30, 2001 and eliminates the pooling-of-interests method.

In June 2001, the FASB also issued SFAS No. 142, Goodwill and Other Intangible Assets, which will be effective for us on January 1, 2002. SFAS No. 142 requires, among other things, the discontinuance of goodwill amortization. SFAS No. 142 also requires us to complete a transitional goodwill impairment test within six months from the date of adoption. As of the date of adoption, we had unamortized goodwill of $933,000 which will be subject to the transition provisions of SFAS Nos. 141 and 142. Amortization expense related to goodwill was $381,000, $479,000 and $479,000 for the years ended December 31, 2001, 2000 and 1999. Because of the extensive effort needed to comply with adopting SFAS Nos. 141 and 142, it is not practicable to reasonably estimate the impact of adopting these Statements on our consolidated financial statements at the date of this report, including whether any transitional impairment losses will be required to be recognized as a cumulative effect of a change in accounting principle.< BR>
In August 2001, the FASB issued SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets, which supersedes both SFAS No. 121, Accounting for the Impairment of Long-Lived Assets and for Long-Lived Assets to Be Disposed Of, and the accounting and reporting provisions of APB Opinion No. 30, Reporting the Results of Operations-Reporting the Effects of Disposal of a Segment of a Business, and Extraordinary, Unusual and Infrequently Occurring Events and Transactions, for the disposal of a segment of a business (as previously defined in that Opinion). SFAS No. 144 retains the fundamental provisions in SFAS No. 121 for recognizing and measuring impairment losses on long-lived assets held for use and long-lived assets to be disposed of by sale, while also resolving significant implementation issues associated with SFAS No. 121. For example, SFAS No. 144 provides guidance on how a long-lived asset that is used as part of a group should be evaluated for impairment, establishes c riteria for when a long-lived asset is held for sale, and prescribes the accounting for a long-lived asset that will be disposed of other than by sale. SFAS No. 144 retains the basic provisions of APB Opinion No. 30 on how to present discontinued operations in the income statement but broadens that presentation to include a component of an entity (rather than a segment of a business). Unlike SFAS No. 121, an impairment assessment under SFAS No. 144 will never result in a write-down of goodwill. Rather, goodwill is evaluated for impairment under SFAS No. 142. We are required to adopt SFAS No. 144 effective January 1, 2002. We do not expect the adoption of SFAS No. 144 for long-lived assets held for use to have a material impact on our consolidated financial statements because the impairment assessment under SFAS No. 144 is largely unchanged from SFAS No. 121. The provisions of SFAS No. 144 for assets held for sale or other disposal generally are required to be applied prospectively after the adoption date to newly initiated disposal activities. Therefore, we cannot determine the potential effects that adoption of SFAS No. 144 will have on our consolidated financial statements.


Critical Accounting Policies

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and assumptions that effect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period.

Certain of our accounts, including goodwill, inventory obsolescence write-downs, deferred income tax valuation allowances and warranty reserves, are particularly impacted by estimates. Some of these accounting estimates and assumptions are particularly sensitive because of their significance to our consolidated financial statements and because of the possibility that future events affecting them may differ markedly from what had been assumed when the financial statements were prepared.

For example, we performed an impairment assessment of our goodwill during 2001 due to the current industry downturn. This impairment assessment was based upon ten-year projections of operations for our subsidiaries where goodwill was associated. In preparing these projections, we made subjective determinations of future events. If any of the significant assumptions were changed, materially different results could have occurred. As a result of this assessment, a $4.6 million impairment charge was recorded for the goodwill associated with the acquisition of TestDesign, which was the net book value of this goodwill as of that date.

 

- 15 -

 






In reviewing our inventory for obsolescence, we make assumptions about future demand for parts contained in our ending inventory, which affect the levels of inventory write-downs during the period. These assumptions include estimates of future demand for our products as well as when these products will become technologically obsolete. If any of the significant assumptions were changed, materially different results could have occurred. As a result of this analysis, there was a $3.4 million write-down of obsolete inventory during 2001.

Deferred tax assets must be analyzed to determine if there will be sufficient taxable income in the future in order to realize such assets. To perform this analysis we prepare projections of our operations in which we make subjective determinations of future events. If our projections do not indicate there will be sufficient levels of operating income in future periods to realize the deferred tax assets, we establish a deferred income tax valuation allowance to offset the deferred tax assets. If any of the significant assumptions were changed, materially different results could occur, which could significantly change the amount of the deferred income tax valuation allowance established.

Finally, in connection with the accrual of warranty costs associated with our products, we make assumptions about the level of product failures that will occur in the future. These assumptions are primarily based upon historical claims experience. Should the rate of future product failures significantly exceed historical levels, our accrued warranty reserves would not be sufficient to cover future warranty expenses and additional significant warranty expense would need to be accrued.

Risks That Could Affect Future Results

The factors discussed below are cautionary statements that identify important factors that could cause our actual results to differ materially from those expressed or implied by our forward-looking statements. These factors may also cause our future results to differ materially from our prior results.

Our forward-looking statements can often be identified by the use of forward-looking terminology such as "believes", "expects", "intends", "may", "will", "should" or "anticipates" or similar terminology, and include, but are not limited to, statements made in this Report regarding:

Our operating results and financial condition could continue to be negatively impacted if the semiconductor industry into which we sell our products remains depressed.

The current economic downturn, combined with significant excess production capacity in the semiconductor industry, have resulted in the worst downturn the semiconductor and ATE industries have ever experienced. This climate has created significantly diminished demand for our products, excess manufacturing capacity in our plants, and the erosion of average selling prices. We are uncertain how long the current downturn will last. The terrorist attacks on September 11, 2001 may have exacerbated this downturn or caused it to last longer. Any further decline in our customers' markets or in general economic conditions would likely result in a further reduction in demand for our products and could harm our consolidated financial position, results of operations, cash flows and stock price. In addition, we may be required to secure debt or equity financing, and we cannot be sure that such financing will be available when required or on acceptable terms.

Our sales reflect the cyclicality of the semiconductor industry, which causes our operating results to fluctuate significantly.

Our business depends in significant part upon the capital expenditures of semiconductor manufacturers. Capital expenditures by these companies depend upon, among other things, the current and anticipated market demand for semiconductors and the products that utilize them. Typically, semiconductor manufacturers curtail capital expenditures during periods of economic downtown. Conversely, semiconductor manufacturers increase capital expenditures when market demand requires the addition of new or expanded production capabilities or the reconfiguration of existing fabrication facilities to accommodate new products. These market changes have caused in the past, and will likely cause in the future, our operating results to fluctuate. The current cyclical downturn in the semiconductor industry has significantly reduced demand for our products. Our sales and operating results will likely continue to be reduced during this downturn.



- - 16 -

Our operating results often change significantly from quarter to quarter and may cause fluctuations in our stock price.

During the last three years, our operating results have fluctuated significantly from quarter to quarter. We believe that these fluctuations occur primarily due to the cycles of demand in the semiconductor manufacturing industry. In addition to the changing cycles of demand in the semiconductor manufacturing industry, other factors that have caused our quarterly operating results to fluctuate in the past, and that may cause fluctuations or losses in the future, include:

Because the market price of our common stock has tended to vary based on, and in relation to, changes in our operating results, fluctuations in the market price of our stock are likely to continue as variations in our quarterly results continue.

If we are not able to control our operating expenses during a cyclical downturn, we may not have sufficient cash to operate our businesses.

Due to the current cyclical downturn, we have implemented cost containment strategies with a goal of reducing our operating expenses and preserving our cash. These strategies include workforce reductions at all of our facilities worldwide, salary reductions for all employees worldwide, a temporary elimination of domestic retirement benefits and additional cost controls on other expenditures. We may not be successful in reaching our goal of reducing our operating expenses sufficiently to maintain our existing cash balances and, if we are not able to control our operating expenses, they could increase and the level of our cash may not be sufficient to operate our businesses. We cannot determine with certainty that, if needed, we would be able to raise additional funding through either equity or debt financing.

We intend to acquire additional businesses. If we are unable to do so, our future rate of growth may be reduced or limited.

A key element of our growth strategy is to acquire businesses, technologies or products that expand and complement our current businesses. We may not be able to execute our acquisition strategy if:

Our acquisition strategy involves financial and management risks which may adversely affect our earnings in the future.

If we acquire additional businesses, technologies or products, we will face the following additional risks:

If any of the events described above occur, our earnings could be reduced. If we issue shares of our stock or other rights to purchase our stock in connection with any future acquisitions, we would dilute our existing stockholders' interests and our earnings per share may decrease. If we issue debt in connection with any future acquisitions, lenders may impose covenants on use which could, among other things, restrict our ability to increase capital expenditures or to acquire additional businesses.

Our industry is subject to rapidly evolving technological change, and our business prospects would be hurt if we are unable to respond to innovation in the semiconductor industry.

Semiconductor technology continues to become more complex as manufacturers incorporate ICs into an increasing variety of products. This trend, and the rapid changes needed in automatic testing systems to respond to developments in the semiconductor industry, are likely to continue. We cannot be certain that we will be successful in developing, manufacturing or selling products that will satisfy customer needs or attain market acceptance. Our failure to provide products that meet customer needs or gain market acceptance will hurt our business prospects.

- 17 -

 

If we are not able to obtain patents on or otherwise preserve and protect our proprietary technologies, our business may suffer.

We have obtained domestic and foreign patents covering some of our products which expire between the years 2002 and 2018, and we have pending applications for additional patents. Some of our products utilize proprietary technology that is not covered by patent or similar protection, and in many cases, cannot be protected. We cannot be certain that:

If we cannot obtain patent or other protection for our proprietary technologies, our ability to compete in our markets could be impaired.

Claims of intellectual property infringement by or against us could seriously harm our businesses.

From time to time, we may be forced to respond to or prosecute intellectual property infringement claims to defend or protect our rights or a customer's rights. These claims, regardless of merit, may consume valuable management time, result in costly litigation or cause product shipment delays. Any of these factors could seriously harm our business and operating results. We may have to enter into royalty or licensing agreements with third parties who claim infringement. These royalty or licensing agreements, if available, may be costly to us. If we are unable to enter into royalty or licensing agreements with satisfactory terms, our business could suffer. In instances where we have had reason to believe that we may be infringing the patent rights of others, or that someone may be infringing our patent rights, we have asked our patent counsel to evaluate the validity of the patents in question, as well as the potentially infringing conduct. If we become involved in a dispute, neither the third parties nor the courts are bound by our counsel's conclusions.

Our business will suffer if we cannot compete successfully with manufacturers whose products are similar to ours.

We compete with numerous manufacturers, many of whom have greater financial resources and more extensive design and production capabilities than we do. Some of our principal competitors in the sale of manipulator, docking and tester interface products are Reid-Ashman Manufacturing, Microhandling GmbH, Credence Systems, LTX, Schlumberger, Teradyne and Cerprobe. Some of our principal competitors in the sale of temperature-management products are Trio-Tech International, Thermonics and ERS Elektronik GmbH. In order to remain competitive with these and other companies, we must be able to continue to commit a significant portion of our personnel, financial resources, research and development and customer support to developing new products and maintaining customer satisfaction worldwide. If we are not able to compete successfully, our business will suffer.

We generate a large portion of our sales from a small number of customers. If we were to lose one or more of our large customers, operating results could suffer dramatically.

Our ten largest customers accounted for approximately 62% of net revenues in 2001, and one customer, Agilent Technologies, accounted for 15% of our net revenues in 2001. The loss of any one or more of our largest customers, or a reduction in orders by a major customer, could materially reduce our net revenues.

If we do not continue to retain the services of key personnel, relationships with, and sales to, some of our customers could suffer.

The loss of key personnel could adversely affect our ability to manage our business effectively. Our future success will depend largely upon the continued services of our senior management and certain other key employees. Generally, we do not have employment agreements with any of our executive officers or other key employees. Our future success will depend, in part, upon our ability to retain our managers, engineers and other key employees. Our business could suffer if we were unable to retain one or more of our senior officers or other key employees.

A substantial portion of our operations exists outside the U.S., which exposes us to foreign political and economic risks.


We have operated internationally for many years and expect to expand our international operations as necessary to continue expansion of our sales and service to our non-U.S. customers. Our foreign subsidiaries generated 13% and 16% of consolidated net revenues in 2001 and 2000, respectively. Export sales from our U.S. manufacturing facilities totaled $9.0 million, or 17% of consolidated net revenues in 2001 and $23.0 million, or 26% in 2000. The portion of our consolidated net revenues that were derived from sales by our subsidiaries in the Asia-Pacific region were 6% in 2001 and 9% in 2000. Countries in the Asia-Pacific region, including Japan, have experienced economic instability resulting in weaknesses in their currency, banking and equity markets. Although the economic instability in the Asia-Pacific region has not had a material adverse effect on our order backlog, financial condition, or results of operations to date, continued economic instability could have a material adverse effect on demand for ou r products and our results of operations. We expect our international revenues will continue to represent a significant portion of total net revenues. To date, we have not experienced significant problems in our foreign operations. However, in addition to the risks generally associated with sales and operations in the U.S., sales to customers outside the U.S. and operations in foreign countries are subject to additional risks, which may, in the future, affect our operations. These risks include:

- 18 -


 

We conduct business in foreign currencies, and fluctuations in the values of those currencies could result in foreign exchange losses.

In 2001, approximately 3% of our net revenues were dominated in Japanese yen, approximately 5% were dominated in British pounds, and approximately 3% were dominated in German deutsche marks. Fluctuations in the values of these currencies could result in foreign exchange losses. Any strengthening of the U.S. dollar in relation to the currencies of our competitors or customers, or strengthening or weakening of the Japanese yen, British pound or German deutsche mark (or the Euro beginning in 2002) in relation to other currencies in which our customers or competitors do business, could adversely affect our competitiveness. Moreover, a strengthening of the U.S. dollar or other competitive factors could put pressure on us to denominate a greater portion of our sales in foreign currencies, thereby increasing our exposure to fluctuations in exchange rates. Any devaluation of these currencies would hurt our business. We do not undertake hedging activities against all of our exchange rate risk. Fluctuations in exchang e rates may adversely affect our competitive position or result in foreign exchange losses, either of which could cause our business to suffer.




Item 7A:
  QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

We are exposed to currency exchange rate risk in the normal course of our business, primarily in our Japanese operations. Our exposure results from the fact that the sales of our Japanese subsidiary are in Japanese yen and inventory purchases are in U.S. dollars. We have the same exposure in our German operations as a portion of total sales are in German deutsche marks (or the Euro beginning in 2002) while inventory purchases are in U.S. dollars. We will also have a similar exposure in our Singapore operations as our manufacturing operations expand, because our sales are in U.S. dollars but some of our manufacturing costs are in British pounds and Singapore dollars. We employ risk management strategies, including the use of forward exchange rate contracts, to manage our exposure to exchange rate risks involving the yen, and may, in the future, use forward exchange rate contracts to manage our exposure to exchange rate risks involving the Singapore dollar and German deutsche mark (or the Euro beginning in 2002).

Our objective in managing currency exchange risk is to minimize the impact of significant currency exchange rate fluctuations. We use forward exchange rate contracts to establish a fixed conversion rate between the Japanese yen and the U.S. dollar so that the level of our gross margin from sales in Japan is not negatively affected by significant movements in the Japanese yen to U.S. dollar exchange rate. We purchase forward exchange rate contracts on a monthly basis in the amounts management deems appropriate in light of the amount of the U.S. dollar denominated obligations of our Japanese subsidiary that are due within the month. We do not purchase forward contracts with settlement dates beyond 30 days. As of December 31, 2001, there were no forward exchange rate contracts outstanding.

It is our policy to enter into forward exchange rate contracts only to the extent necessary to achieve the desired objectives of management in limiting our exposure to significant fluctuations in currency exchange rates. We do not hedge all of our currency exchange rate risk exposures in a manner that would completely eliminate the impact of changes in currency exchange rates on our net earnings. We do not expect that the results of our operations or our liquidity will be materially affected by these risk management activities.




Item 8:
  FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Consolidated financial statements are set forth in this Report beginning at page F-1




Item 9.
  CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURES

None

- 19 -


inTEST Corporation
Annual Report on Form 10-K

 

PART III:

Item 10:   DIRECTORS AND EXECUTIVE OFFICERS

The information required by this item will be filed not later than April 30, 2002 by an amendment to this Report or incorporation by reference to the proxy statement for our 2002 Annual Meeting of Stockholders.

 

Item 11:   EXECUTIVE COMPENSATION

The information required by this item will be filed not later than April 30, 2002 by an amendment to this Report or incorporation by reference to the proxy statement for our 2002 Annual Meeting of Stockholders.

 

Item 12:   SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT

The information required by this item will be filed not later than April 30, 2002 by an amendment to this Report or incorporation by reference to the proxy statement for our 2002 Annual Meeting of Stockholders.

 

Item 13:   CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS

The information required by this item will be filed not later than April 30, 2002 by an amendment to this Report or incorporation by reference to the proxy statement for our 2002 Annual Meeting of Stockholders.

 


PART IV:

Item 14:   EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K

(a)     The documents filed as part of this Annual Report on Form 10-K are:

(i)     Our consolidated financial statements and notes thereto as well as the applicable report of the independent certified public accountants are included in Part II, Item 8 of this Annual Report on Form 10-K.

(ii)    The following consolidated financial statement schedule should be read in conjunction with the consolidated financial statements set forth in Part II, Item 8 of this Annual Report on Form 10-K:

                Schedule II -- Valuation and Qualifying Accounts

(iii)   The exhibits required by Item 601 of Regulation S-K are included under Item 14(c) of this Annual Report on Form 10-K.

(b)     Reports on Form 8-K

On October 26, 2001, we filed a Report on Form 8-K providing information responsive to the requirements of Items 5 and 7 of that form regarding our financial results for the quarter and nine months ended September 30, 2001.

 

- 20 -

inTEST Corporation
Annual Report on Form 10-K

PART IV: (Continued)

Item 14:   EXHIBITS, FINANCIAL STATEMENT SCHEDULES AND REPORTS ON FORM 8-K (Continued)

(c)     Exhibits required by Item 601 of Regulation S-K:

Exhibit
Number


Description of Exhibit

  3.1

Certificate of Incorporation.*

  3.2

By Laws.*

10.1

Consulting Agreement, dated April 1, 1997, between the Company and Stuart F.
   Daniels.*

10.2

Lease dated October 27, 1999 between Earl E. and Mitsue Jio and inTEST Sunnyvale, a
   wholly owned subsidiary of the Company.**

10.3

Temptronic Corporation 1998 Incentive and Non-Statutory Stock Option Plan.***

10.4

Lease Agreement between First Industrial, L.P. and the Company, dated
   June 6, 2000.****

10.5

Lease between SPHOS, Inc. and Temptronic Corporation (a subsidiary of the Company),
   dated December 27, 2000.*****

10.6

Change of Control Agreement dated April 17, 2001 between the Company and Robert E.
   Matthiessen******

10.7

Change of Control Agreement dated April 17, 2001 between the Company and Hugh T.
   Regan, Jr.******

10.8

Amended and Restated 1997 Stock Plan.*******

10.9

Loan Agreement dated November 16, 2000 between PNC Bank, National Association and
   the Company*****

10.10

Note payable to PNC Bank, National Associated dated November 1, 2000*****

10.11

Letter dated September 28, 2001, renewing the Loan Agreement dated November 16, 2000
   and Note dated November 1, 2000********

21

Subsidiaries of the Company.

23

Consent of KPMG LLP.

 

 

*

Previously filed by the Company as an exhibit to the Company's Registration Statement on
Form S-1, File No. 333-26457 filed May 2, 1997, and incorporated herein by reference.

**

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year
ended December 31, 1999, filed March 30, 2000, and incorporated herein by reference.

***

Previously filed by the Company as an exhibit to the Company's Form 10-Q/A for the
quarter ended March 31, 2000, filed June 21, 2000, and incorporated herein by reference.

****

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the
quarter ended June 30, 2000, filed August 14, 2000, and incorporated herein by reference.

*****

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year
ended December 31, 2000, filed March 30, 2001, and incorporated herein by reference.

******

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter
ended March 31, 2001, filed May 15, 2001, and incorporated herein by reference.

*******

Previously filed as an appendix to the Company's proxy statement filed April 27, 2001,
and incorporated herein by reference.

********

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter
ended September 30, 2001, filed November 14, 2001, and incorporated herein by reference.

- 21 -

 


 

Signatures

 

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

inTEST Corporation

 

By:   /s/ Robert E. Matthiessen
        Robert E. Matthiessen
        President and Chief Executive Officer

 

 

Pursuant to the requirements of Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

/s/ Robert E. Matthiessen
Robert E. Matthiessen, President,
Chief Executive Officer and Director
(principal executive officer)

April 1, 2002

 

 

/s/ Hugh T. Regan, Jr.
Hugh T. Regan, Jr., Treasurer, Chief
Financial Officer and Secretary
(principal financial officer)

April 1, 2002

 

 

/s/ Daniel J. Graham
Daniel J. Graham, Vice Chairman, Senior
Vice President

April 1, 2002

 

 

/s/ Alyn R. Holt
Alyn R. Holt, Chairman

April 1, 2002

 

 

/s/ Richard O. Endres
Richard O. Endres, Director

April 1, 2002

 

 

/s/ Stuart F. Daniels
Stuart F. Daniels, Director

April 1, 2002

 

 

/s/ Gregory W. Slayton
Gregory W. Slayton, Director

April 1, 2002

 

 

/s/ Douglas W. Smith
Douglas W. Smith, Director

April 1, 2002

 

 

/s/ James J. Greed, Jr.
James J. Greed, Jr, Director

April 1, 2002

 

- 22 -


 

 

Index to Exhibits

 

Exhibit
Number


Description of Exhibit

 

 

  3.1

Certificate of Incorporation.*

  3.2

By Laws.*

10.1

Consulting Agreement, dated April 1, 1997, between the Company and Stuart F.
   Daniels.*

10.2

Lease dated October 27, 1999 between Earl E. and Mitsue Jio and inTEST Sunnyvale, a
   wholly owned subsidiary of the Company.**

10.3

Temptronic Corporation 1998 Incentive and Non-Statutory Stock Option Plan.***

10.4

Lease Agreement between First Industrial, L.P. and the Company, dated
   June 6, 2000.****

10.5

Lease between SPHOS, Inc. and Temptronic Corporation (a subsidiary of the Company),
   dated December 27, 2000.*****

10.6

Change of Control Agreement dated April 17, 2001 between the Company and Robert E.
   Matthiessen******

10.7

Change of Control Agreement dated April 17, 2001 between the Company and Hugh T.
   Regan, Jr.******

10.8

Amended and Restated 1997 Stock Plan.*******

10.9

Loan Agreement dated November 16, 2000 between PNC Bank, National Association and
   the Company*****

10.10

Note payable to PNC Bank, National Associated dated November 1, 2000*****

10.11

Letter dated September 28, 2001, renewing the Loan Agreement dated November 16, 2000
   and Note dated November 1, 2000********

 

 

21

Subsidiaries of the Company.

23

Consent of KPMG LLP.

 

 

 

 

*

Previously filed by the Company as an exhibit to the Company's Registration Statement on
Form S-1, File No. 333-26457 filed May 2, 1997, and incorporated herein by reference.

**

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year
ended December 31, 1999, filed March 30, 2000, and incorporated herein by reference.

***

Previously filed by the Company as an exhibit to the Company's Form 10-Q/A for the
quarter ended March 31, 2000, filed June 21, 2000, and incorporated herein by reference.

****

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the
quarter ended June 30, 2000, filed August 14, 2000, and incorporated herein by reference.

*****

Previously filed by the Company as an exhibit to the Company's Form 10-K for the year
ended December 31, 2000, filed March 30, 2001, and incorporated herein by reference.

******

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter
ended March 31, 2001, filed May 15, 2001, and incorporated herein by reference.

*******

Previously filed as an appendix to the Company's proxy statement filed April 27, 2001,
and incorporated herein by reference.

********

Previously filed by the Company as an exhibit to the Company's Form 10-Q for the quarter
ended September 30, 2001, filed November 14, 2001, and incorporated herein by reference.

 

 

- 23 -


 

 

 

 

 

 

inTEST CORPORATION

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS AND
CONSOLIDATED FINANCIAL STATEMENT SCHEDULE

 

 

 

Page

CONSOLIDATED FINANCIAL STATEMENTS

 

    Independent Auditor's Report

F - 1

    Consolidated Balance Sheets as of December 31, 2001 and 2000

F - 2

    Consolidated Statements of Operations for the years ended
       December 31, 2001, 2000 and 1999


F - 3

    Consolidated Statements of Comprehensive Earnings (Loss) for the years
       ended December 31, 2001, 2000 and 1999


F - 4

    Consolidated Statements of Stockholders' Equity for the years
       ended December 31, 2001, 2000 and 1999


F - 5

    Consolidated Statements of Cash Flows for the years ended
       December 31, 2001, 2000 and 1999


F - 6

    Notes to Consolidated Financial Statements

F - 7

 

 

CONSOLIDATED FINANCIAL STATEMENT SCHEDULE

 

    Schedule II - Valuation and Qualifying Accounts

F - 19

 

 

 

 

 

 

 

- 24 -

 

 

 

 

 

 

 

Independent Auditors' Report

 

 

The Board of Directors and Stockholders
inTEST Corporation


We have audited the accompanying consolidated balance sheets of inTEST Corporation and subsidiaries as of December 31, 2001 and 2000, and the related consolidated statements of operations, comprehensive earnings (loss), stockholders' equity and cash flows for each of the years in the three-year period ended December 31, 2001. In connection with our audits of the consolidated financial statements, we also have audited the consolidated financial statement schedule of valuation and qualifying accounts as of and for the three years ended December 31, 2001. These consolidated financial statements and consolidated financial statement schedule are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements and consolidated financial statement schedule based on our audits.

We conducted our audits in accordance with auditing standards generally accepted in the United States of America. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatements. An audit includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements. An audit also includes assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the financial position of inTEST Corporation and subsidiaries as of December 31, 2001 and 2000, and the results of their operations and their cash flows for each of the years in the three-year period ended December 31, 2001, in conformity with accounting principles generally accepted in the United States of America. Also, in our opinion, the related consolidated financial statement schedule, when considered in relation to the basic consolidated financial statements taken as a whole, presents fairly, in all material respects, the information set forth therein.

/s/KPMG LLP

Philadelphia, Pennsylvania
February 25, 2002

 

 

 

 

 

 

 

F - 1

 

 

 

inTEST CORPORATION
CONSOLIDATED BALANCE SHEETS
(In thousands, except share and per share data)

                                                                       December 31,
                                                                   --------------------
                                                                     2001       2000
                                                                   ---------   --------
ASSETS:
Current assets:
  Cash and cash equivalents                                         $ 7,281    $ 5,680
  Trade accounts and notes receivable, net of allowance for
    doubtful accounts of $125 and $241, respectively                  5,191     14,752
  Inventories                                                         7,554     12,559
  Deferred tax asset                                                  1,539      1,287
  Refundable domestic and foreign income taxes                        2,428        931
  Other current assets                                                  421        463
                                                                    -------    -------
     Total current assets                                            24,414     35,672
                                                                    -------    -------
Property and equipment:
  Machinery and equipment                                             9,167      9,856
  Leasehold improvements                                              2,607      2,750
                                                                    -------    -------
                                                                     11,774     12,606
  Less: accumulated depreciation                                     (6,031)    (7,519)
                                                                    -------    -------
     Net property and equipment                                       5,743      5,087
                                                                    -------    -------
Deferred tax asset                                                       30        210
Other assets                                                            648        407
Goodwill, net of accumulated amortization of $406 and
   $1,259, respectively                                                 933      5,926
                                                                    -------    -------
     Total assets                                                   $31,768    $47,302
                                                                    =======    =======
LIABILITIES AND STOCKHOLDERS' EQUITY
Current liabilities:
  Accounts payable                                                  $ 1,869    $ 4,563
  Accrued expenses                                                    2,100      3,568
  Domestic and foreign income taxes payable                             218        773
  Capital lease obligations                                              81          -
                                                                    -------    -------
     Total current liabilities                                        4,268      8,904
                                                                    -------    -------
Capital lease obligations, net of current portion                       296          -
                                                                    -------    -------
     Total liabilities                                                4,564      8,904
                                                                    -------    -------
Commitments
Stockholders' equity:
  Preferred stock, $0.01 par value; 5,000,000 shares authorized;
     no shares issued or outstanding                                      -          -
  Common stock, $0.01 par value; 20,000,000 shares authorized;
     8,685,205 and 8,658,511 shares issued, respectively                 87         87
  Additional paid-in capital                                         21,781     22,328
  Retained earnings                                                   8,127     19,456
  Accumulated other comprehensive loss                                 (451)      (300)
  Deferred compensation                                                 (16)       (98)
  Note receivable from Equity Participation Plan                          -     (3,075)
  Treasury stock, at cost; 375,982 and 0 shares, respectively        (2,324)         -
                                                                    -------    -------
     Total stockholders' equity                                      27,204     38,398
                                                                    -------    -------
     Total liabilities and stockholders' equity                     $31,768    $47,302
                                                                    =======    =======

See accompanying Notes to Consolidated Financial Statements.
F - 2

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except share and per share data)





                                                        Years Ended December 31,
                                                     ------------------------------
                                                       2001        2000      1999
                                                     -------     --------  --------
Net revenues                                         $51,627     $87,651    $53,585
Cost of revenues                                      38,916      48,095     26,875
                                                     -------     -------    -------
      Gross margin                                    12,711      39,556     26,710
                                                     -------     -------    -------
Operating expenses:
   Selling expense                                     8,754      11,711      8,418
   Engineering and product development
    expense                                            6,132       6,576      4,864
   General and administrative expense                  7,902       7,273      6,101
   Impairment of goodwill                              4,612           -          -
   Merger-related costs                                    -       2,672          -
   Write-off of deferred offering costs                    -         415          -
                                                     -------     -------    -------
      Total operating expenses                        27,400      28,647     19,383
                                                     -------     -------    -------
Operating income (loss)                              (14,689)     10,909      7,327
                                                     -------     -------    -------
Other income (expense):
   Interest income                                       213         493        348
   Interest expense                                      (31)        (31)      (229)
   Other                                                 369         208        112
                                                     -------     -------    -------
      Total other income (expense)                       551         670        231
                                                     -------     -------    -------
Earnings (loss) before income taxes                  (14,138)     11,579      7,558
Income tax expense (benefit)                          (2,809)      5,200      1,425
                                                    --------     -------    -------
      Net earnings (loss)                           $(11,329)    $ 6,379    $ 6,133
                                                    ========     =======    =======

Net earnings (loss) per common share - basic          $(1.37)      $0.78      $0.76

Weighted average common shares outstanding -
  basic                                            8,279,356   8,201,029  8,084,398

Net earnings (loss) per common share - diluted        $(1.37)      $0.75      $0.74

Weighted average common shares and common share
  equivalents outstanding - diluted                8,279,356   8,469,910  8,265,537

 

 

 

See accompanying Notes to Consolidated Financial Statements.



F - 3

 

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF COMPREHENSIVE EARNINGS (LOSS)
(In thousands)













                                                        Years Ended December 31,
                                                      ----------------------------
                                                        2001       2000      1999
                                                      --------    ------    ------

Net earnings (loss)                                   $(11,329)   $6,379    $6,133

Foreign currency translation adjustments                  (151)     (314)       49
                                                      --------    ------    ------

Comprehensive earnings (loss)                         $(11,480)   $6,065    $6,182
                                                      ========    ======    ======

 

 

 

 

 

 

 

 

 

 

 

See accompanying Notes to Consolidated Financial Statements.


F - 4

 

 

 

 

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF STOCKHOLDERS' EQUITY
(In thousands, except share data)

                                                        Accum.
                                                        Other
                       Common Stock   Addt'l            Comp.              Equity               Total
                     ---------------- Paid-In Retained  Income   Deferred   Part.   Treasury Stockholders'
                      Shares   Amount Capital Earnings  (Loss)     Comp.  Plan Note   Stock     Equity
                     --------- ------ ------- -------- --------- -------- --------- -------- -------------

Balance, 1/1/99      8,597,842  $  86 $21,913  $ 6,944   $ (35)   $ (255)  $(3,367) $  (224)   $25,062

Net earnings                 -      -       -    6,133       -         -         -        -      6,133
Other comprehen-
  sive income                -      -       -        -      49         -         -        -         49
Amortization of
  deferred
  compensation               -      -       -        -       -        75         -        -         75
Elimination of
  deferred comp-
  ensation related
  to stock options
  forfeited                  -      -     (41)       -       -        41         -        -          -
Principal payments
  by Equity Partici-
  pation Plan                -      -       -        -       -         -       139        -        139
Stock options
  exercised             33,138      -       -        -       -         -         -        -          -
                     ---------  ----- -------  -------   -----    ------   -------  -------    -------
Balance, 12/31/99    8,630,980     86  21,872   13,077      14      (139)   (3,228)    (224)    31,458

Net earnings                 -      -       -    6,379       -         -         -        -      6,379
Other comprehen-
  sive loss                  -      -       -        -    (314)        -         -        -       (314)
Amortization of
  deferred
  compensation               -      -       -        -       -        41         -        -         41
Principal payments
  by Equity Partici-
  pation Plan                -      -       -        -       -         -       153        -        153
Stock options
  exercised             83,088      1     226        -       -         -         -        -        227
Tax benefit from
  exercise of
  stock options              -      -     454        -       -         -         -        -        454
Retirement of
  treasury stock       (55,557)     -    (224)       -       -         -         -      224          -
                     ---------  ----- -------  -------   -----    ------   -------  -------    -------
Balance, 12/31/00    8,658,511     87  22,328   19,456    (300)      (98)   (3,075)       -     38,398

Net loss                     -      -       -  (11,329)      -         -         -        -    (11,329)
Other comprehen-
  sive loss                  -      -       -        -    (151)        -         -        -       (151)
Amortization of
  deferred
  compensation               -      -       -        -       -        58         -        -         58
Elimination of
  deferred comp-
  ensation related
  to stock options
  forfeited                  -      -     (24)       -       -        24         -        -          -
Principal payments
  by Equity Partici-
  pation Plan                -      -       -        -       -         -       147        -        147
Termination of
  Equity Participa-
  tion Plan and
  acquisition of
  treasury stock             -      -    (604)       -       -         -     2,928   (2,324)         -
Stock options
  exercised             34,674      -     100        -       -         -         -        -        100
Tax benefit from
  exercise of
  stock options              -      -      22        -       -         -         -        -         22
Acquisition and
  retirement of
  treasury stock        (4,226)     -     (41)       -       -         -         -        -        (41)
Cancellation of
  escrow shares         (3,754)     -       -        -       -         -         -        -          -
                     ---------  ----- -------  -------   -----    ------   -------  -------    -------

Balance, 12/31/01    8,685,205  $  87 $21,781  $ 8,127   $(451)   $  (16)  $     -  $(2,324)   $27,204
                     =========  ===== =======  =======   =====    ======   =======  =======    =======

See accompanying Notes to Consolidated Financial Statements.
F - 5

inTEST CORPORATION
CONSOLIDATED STATEMENTS OF CASH FLOWS

(In thousands)

                                                                 Years Ended December 31,
                                                               ---------------------------
                                                                 2001      2000      1999
CASH FLOWS FROM OPERATING ACTIVITIES                           -------   -------   -------
  Net earnings (loss)                                         $(11,329)  $ 6,379   $ 6,133
  Adjustments to reconcile net earnings (loss) to net cash
   provided by (used in) operating activities:
    Depreciation                                                 1,801     1,595       950
    Amortization of goodwill                                       381       479       479
    Impairment of goodwill                                       4,612         -         -
    Tax benefit from exercise of stock options                      22       454         -
    Deferred taxes                                                 (72)      124    (1,377)
    Foreign exchange (gain) loss                                    15       (28)      (36)
    Deferred compensation relating to stock options                 58        41        75
    Loss on disposal of fixed assets                                 9        16         -
    Changes in assets and liabilities:
      Trade accounts and notes receivable                        9,429    (4,901)   (4,189)
      Inventories                                                4,973    (4,604)   (2,080)
      Proceeds from sale of demonstration equipment,
       net of gain                                                 121        17        85
      Refundable domestic and foreign income taxes              (1,476)     (477)    1,123
      Other current assets                                          31       431      (481)
      Accounts payable                                          (2,629)     (543)    3,045
      Domestic and foreign income taxes payable                   (553)   (1,505)    1,639
      Accrued expenses                                          (1,454)      581     1,561
                                                               -------   -------   -------
Net cash provided by (used in) operating activities              3,939    (1,941)    6,927
                                                               -------   -------   -------
CASH FLOWS FROM INVESTING ACTIVITIES
  Purchase of machinery and equipment                           (2,378)   (4,050)   (1,596)
  Other long-term assets                                          (277)      921      (100)
                                                               -------   -------   -------
Net cash used in investing activities                           (2,655)   (3,129)   (1,696)
                                                               -------   -------   -------
CASH FLOWS FROM FINANCING ACTIVITIES
  Net repayments of revolving debt                                   -    (1,241)   (1,784)
  Repayment of long-term debt                                      (65)     (256)     (156)
  Proceeds from financing of machinery and equipment               216         -         -
  Note receivable repayments from Equity Participation Plan        147       153       139
  Acquisition of treasury stock                                    (41)        -         -
  Proceeds from stock options exercised                            100       227         -
                                                               -------   -------   -------
Net cash provided by (used in) financing activities                357    (1,117)   (1,801)
                                                               -------   -------   -------
Effects of exchange rates on cash                                  (40)     (180)      (20)
                                                               -------   -------   -------
Net cash provided by (used in) all activities                    1,601    (6,367)    3,410
Cash and cash equivalents at beginning of period                 5,680    12,047     8,637
                                                               -------   -------   -------
Cash and cash equivalents at end of period                     $ 7,281   $ 5,680   $12,047
                                                               =======   =======   =======
SUPPLEMENTAL SCHEDULE OF NON-CASH INVESTING AND FINANCING
 ACTIVITIES:
  Capital lease additions                                      $   226   $     -   $     -
                                                               =======   =======   =======
  Treasury stock acquired as repayment of Equity
    Participation Plan note receivable (See Note 10)           $ 2,324   $     -   $     -
                                                               =======   =======   =======
Cash (refunds) payments for:
  Domestic and foreign income taxes                            $  (752)  $ 6,573   $    59
  Interest                                                          29        32       240

See accompanying Notes to Consolidated Financial Statements.
F - 6 


inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)




(1)
  NATURE OF OPERATIONS

We are a leading independent designer, manufacturer and marketer of manipulator and docking hardware products, temperature management systems and tester interface products that are used by semiconductor manufacturers in conjunction with automatic test equipment, or ATE, in the testing of integrated circuits, or ICs.

The consolidated entity is comprised of inTEST Corporation (parent) and our nine 100% owned subsidiaries: inTEST Limited (Thame, U.K.), inTEST Kabushiki Kaisha (Kichijoji, Japan), inTEST PTE, Limited (Singapore), inTEST Sunnyvale Corp. (formerly TestDesign Corporation) (Delaware), Temptronic Corporation (Delaware), inTEST GmbH (Germany) (operations commenced during August 2000), inTEST Investments, Inc. (a Delaware holding company), inTEST IP Corp. (a Delaware holding company) and inTEST Licensing Corp. (a Delaware holding company).

We manufacture our products in the U.S., the U.K. and Singapore. Marketing and support activities are conducted worldwide from our facilities in the U.S., the U.K., Germany, Japan and Singapore.

On March 9, 2000, we completed a merger with Temptronic Corporation ("Temptronic") whereby Temptronic was merged into one of our wholly-owned subsidiaries. We exchanged 2,046,793 shares of our common stock for all of the Temptronic common stock. Each share of Temptronic common stock was exchanged for 0.925 shares of our common stock. In addition, outstanding Temptronic stock options were converted at the same exchange ratio into options to acquire 175,686 shares of our common stock. The merger was accounted for under the pooling-of-interests method of accounting and, accordingly, our consolidated financial statements for periods prior to the merger date were retroactively restated to give effect to the merger. Upon consummation of the merger, 55,557 shares of treasury stock held by Temptronic with a cost of $224 were retired. Temptronic also has a 100% owned foreign subsidiary, which is consolidated with Temptronic for reporting purposes.




(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES

Basis of Presentation

The accompanying consolidated financial statements include our accounts and those of our wholly-owned subsidiaries. All significant intercompany accounts and transactions have been eliminated upon consolidation. The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires us to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Certain of our accounts, including goodwill, inventory obsolescence write-downs, deferred income tax valuation allowances and warranty reserves, are particularly impacted by estimates.

Risks and Uncertainties

Our historic results of operations as presented in these consolidated financial statements may not be indicative of future results. Factors that could affect our future operating results and cause actual results to vary materially from historical results include, but are not limited to, the highly cyclical nature of the semiconductor industry; dependence upon capital expenditures of semiconductor manufacturers; developments and trends in the IC and ATE industries; changes in general economic, business and financial market conditions; future acquisitions and our ability to successfully integrate our operations with those of the acquired entity; costs associated with future acquisitions and integration of operations; the impairment of goodwill related to prior or future acquisitions; the ability to effectively control operating costs; competitive pricing pressures; delays in shipments of products; the mix of products sold; the mix of customers and geographic regions where products are sold; the loss of, or red uction in orders from, a major customer; the development of new products and technologies by us or our competitors; our ability to obtain patent protection and to enforce patent rights for existing and developing proprietary technologies; the technological obsolescence of our inventory; the availability of qualified personnel; net revenues generated by foreign subsidiaries; exchange rate fluctuations and the use of forward exchange rate contracts; the anticipated market for our products; and the sufficiency of cash balances, lines of credit and net cash from operations.

Reclassification

Certain prior year amounts have been reclassified to be comparable with the current year's presentation.

F - 7

 


inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)

(2)   SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)


Cash and Cash Equivalents

Short-term investments which have maturities of three months or less when purchased are considered to be cash equivalents and are carried at cost, which approximates market value.

Trade Notes Receivable

Trade notes receivable are due from trade customers in Japan, and have original maturities of less than four months. The notes are non-interest bearing. Trade notes receivable were $36 and $193 at December 31, 2001 and 2000, respectively.

Credit Risks

We grant credit to customers and generally require no collateral. To minimize our risk, we perform ongoing credit evaluations of our customers' financial condition. Bad debt expense (recovery) was $(104), $31, and $16 for the years ended December 31, 2001, 2000 and 1999, respectively.

Inventories

Inventories are stated at the lower of cost or market. Cost is determined under the first-in first-out (FIFO) method.

Property and Equipment

Machinery and equipment are stated at cost. Depreciation is based upon the estimated useful life of the assets using the straight-line method. The estimated useful lives range from three to seven years. Leasehold improvements are recorded at cost and amortized over the shorter of the lease term or the estimated useful life of the asset. Total depreciation expense was $1,801, $1,595 and $950 for the years ended December 31, 2001, 2000 and 1999, respectively. Expenditures for maintenance and repairs are charged to operations as incurred.

Intangibles

Goodwill resulting from the acquisition of the minority interest in three of our foreign subsidiaries and the acquisition of TestDesign is amortized on a straight-line basis over 15 years. Total amortization expense for the years ended December 31, 2001, 2000 and 1999 was $381, $479 and $479, respectively. When events or circumstances so indicate, we assess the potential impairment of our intangible assets and other long-lived assets based on anticipated undiscounted cash flows from operations. Such events and circumstances include a sale of all or a significant part of the operations associated with the long-lived asset, or a significant decline in the operating performance of the asset. The amount of impairment charge, if any, is calculated by comparing the anticipated discounted future cash flows to the carrying value of the long-lived asset.

We performed an impairment assessment of our goodwill as of September 30, 2001, due to the current industry downturn. As a result of this assessment, a $4,612 impairment charge was recorded for the goodwill that is associated with the acquisition of TestDesign, which was the net book value of this goodwill as of that date. No impairment was indicated for the goodwill that is associated with the acquisition of three of our foreign subsidiaries which had a net book value of $933 at December 31, 2001.

Income Taxes

The asset and liability method is used in accounting for income taxes. Under this method, deferred tax assets and liabilities are recognized for operating loss and tax credit carryforwards and for the future tax consequences attributable to differences between the financial statement carrying amounts of existing assets and liabilities and their respective tax bases. Deferred tax assets and liabilities are measured using enacted tax rates expected to apply to taxable income in the years in which those temporary differences are expected to be recovered or settled. The effect on deferred tax assets and liabilities of a change in tax rates is recognized in the results of operations in the period that includes the enactment date. A valuation allowance is recorded to reduce the carrying amounts of deferred tax assets unless it is more likely than not that such assets will be realized.

Net Earnings (Loss) Per Common Share

Net earnings (loss) per common share is computed in accordance with Statement of Financial Accounting Standards ("SFAS") No. 128, Earnings Per Share. Basic earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares outstanding during each year. Diluted earnings (loss) per common share is computed by dividing net earnings (loss) by the weighted average number of common shares and common share equivalents outstanding during each year. Common share equivalents represent stock options and are calculated using the treasury stock method. Common share equivalents are excluded from the calculation if their effect is anti-dilutive.

F-8

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(2)
  SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

A reconciliation of weighted average common shares outstanding -- basic to weighted average common shares outstanding -- diluted appears below:

 

Years Ended December 31,

 

2001

2000

1999

Weighted average common shares outstanding -- basic

8,279,356

8,201,029

8,084,398

Potentially dilutive securities:

 

 

 

     Employee stock options

                -

  268,881

  181,139

 

 

 

 

Weighted average common shares outstanding -- diluted

8,279,356

8,469,910

8,265,537

 

For the year ended December 31, 2001, common share equivalents of 95,288 were excluded from the calculation because their effect was anti-dilutive. Weighted average common shares outstanding exclude unallocated shares of common stock held by the Temptronic Corporation Equity Participation Plan ("EPP") (see Note 10).

Revenue Recognition

Revenues from sales of products are recognized upon shipment to customers. Service revenues are recognized as the services are performed.

Engineering and Product Development

Engineering and product development costs, which consist primarily of the salary and related benefits costs of our technical staff, as well as product development costs, are expensed as incurred.

Product Warranties

We generally provide product warranties and record estimated warranty expense at the time of sale based upon historical claims experience. Warranty expense for the years ended December 31, 2001, 2000 and 1999 was $1,044, $1,102 and $790, respectively.

Stock-Based Compensation

We account for our stock option plans in accordance with SFAS No. 123, Accounting for Stock-Based Compensation. As permitted by SFAS No. 123, we have elected to continue to follow Accounting Principles Board Opinion No. 25, Accounting for Stock Issued to Employees ("APB 25") in accounting for our stock option plans. Under APB 25, we do not recognize compensation expense on the issuance of our stock options to employees and non-employee directors when the option terms are fixed and the exercise price equals the fair value of the underlying stock on the grant date. Compensation expense for stock options granted to non-employees is accounted for based upon the fair value of the options on the date of grant, in accordance with the provisions of SFAS No. 123.

Foreign Currency

The accounts of the foreign subsidiaries are translated in accordance with SFAS No. 52, Foreign Currency Translation, which requires that assets and liabilities of international operations be translated using the exchange rate in effect at the balance sheet date. The results of operations are translated using an average exchange rate for the period. The effects of rate fluctuations in translating assets and liabilities of international operations into U.S. dollars are accumulated within other comprehensive income or loss in the consolidated statements of stockholders' equity. Transaction gains or losses are included in net earnings (loss).

Financial Instruments

Our financial instruments, principally accounts and notes receivable and accounts payable, are carried at cost which approximates fair value, due to the short maturities of the accounts. The estimated fair values of our capital lease obligations approximated their carrying value based upon the rates offered to us for similar type arrangements.

 

F - 9

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(2)
  SUMMARY OF SIGNIFICANT ACCOUNTING POLICIES (Continued)

New Accounting Pronouncements

In June 1998, the Financial Accounting Standards Board ("FASB") issued SFAS No. 133, Accounting for Derivative Instruments and Hedging Activities, which established accounting and reporting standards for derivative instruments, including certain derivative instruments embedded in other contracts (collectively referred to as derivatives) and for hedging activities. SFAS No. 133, as amended by SFAS Nos. 137 and 138, was effective for all fiscal quarters of fiscal years beginning after June 15, 2000. We adopted SFAS No. 133 in the first quarter of 2001, as required. The adoption of SFAS No. 133, as amended, did not have an effect on our results of operations, financial condition or long-term liquidity.

In June 2001, the FASB issued SFAS No. 141, Business Combinations. SFAS No. 141 requires the use of the purchase method of accounting for business combinations initiated after June 30, 2001 and eliminates the pooling-of-interests method.

In June 2001, the FASB also issued SFAS No. 142, Goodwill and Other Intangible Assets, which will be effective for us on January 1, 2002. SFAS No. 142 requires, among other things, the discontinuance of goodwill amortization. SFAS No. 142 also requires us to complete a transitional goodwill impairment test within six months from the date of adoption. As of the date of adoption, we had unamortized goodwill of $933 which will be subject to the transition provisions of SFAS Nos. 141 and 142. Amortization expense related to goodwill was $381, $479 and $479 for the years ended December 31, 2001, 2000 and 1999. Because of the extensive effort needed to comply with adopting SFAS Nos. 141 and 142, it is not practicable to reasonably estimate the impact of adopting these Statements on our consolidated financial statements at the date of this report, including whether any transitional impairment losses will be required to be recognized as a cumulative effect of a change in accounting principle.

In August 2001, the FASB issued SFAS No. 144, Accounting for the Impairment or Disposal of Long-Lived Assets, which supersedes both SFAS No. 121, Accounting for the Impairment of Long-Lived Assets and for Long-Lived Assets to Be Disposed Of, and the accounting and reporting provisions of APB Opinion No. 30, Reporting the Results of Operations-Reporting the Effects of Disposal of a Segment of a Business, and Extraordinary, Unusual and Infrequently Occurring Events and Transactions, for the disposal of a segment of a business (as previously defined in that Opinion). SFAS No. 144 retains the fundamental provisions in SFAS No. 121 for recognizing and measuring impairment losses on long-lived assets held for use and long-lived assets to be disposed of by sale, while also resolving significant implementation issues associated with SFAS No. 121. For example, SFAS No. 144 provides guidance on how a long-lived asset that is used as part of a group should be evaluated for impairment, establishes c riteria for when a long-lived asset is held for sale, and prescribes the accounting for a long-lived asset that will be disposed of other than by sale. SFAS No. 144 retains the basic provisions of APB Opinion No. 30 on how to present discontinued operations in the income statement but broadens that presentation to include a component of an entity (rather than a segment of a business). Unlike SFAS No. 121, an impairment assessment under SFAS No. 144 will never result in a write-down of goodwill. Rather, goodwill is evaluated for impairment under SFAS No. 142. We are required to adopt SFAS No. 144 effective January 1, 2002. We do not expect the adoption of SFAS No. 144 for long-lived assets held for use to have a material impact on our consolidated financial statements because the impairment assessment under SFAS No. 144 is largely unchanged from SFAS No. 121. The provisions of SFAS No. 144 for assets held for sale or other disposal generally are required to be applied prospectively after the adoption date to newly initiated disposal activities. Therefore, we cannot determine the potential effects that adoption of SFAS No. 144 will have on our consolidated financial statements.


(3)
  SEGMENT INFORMATION

We consider the various products we design, manufacture and market to form three reportable segments: manipulator/docking hardware products, temperature management systems and tester interface products. The manipulator and docking hardware segment includes the operations of our Cherry Hill, New Jersey manufacturing facility as well as the operations of three of our foreign subsidiaries: inTEST Limited, inTEST Kabushiki Kaisha, and inTEST PTE, Limited. Sales of this segment consist primarily of manipulator and docking hardware products which we design, manufacture and market, as well as certain other related products which we design and market, but which are manufactured by third parties. The temperature management segment includes the operations of Temptronic in Sharon, Massachusetts as well as inTEST GmbH. Sales of this segment consist primarily of temperature management systems which we design, manufacture and market under our Temptronic product line. In addition, this segment provides after sale se rvice and support, which is paid for by its customers. The tester interface segment includes the operations of inTEST Sunnyvale Corp. in Sunnyvale, California. Sales of this segment consist primarily of tester interface products which we design, manufacture and market under our TestDesign product line.

We operate our business worldwide and all three segments sell their products both domestically and internationally. All three segments sell to semiconductor manufacturers and ATE manufacturers.

Intercompany pricing between segments is either a multiple of cost for component parts or a percentage discount from list price for finished goods.

F - 10


inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)

(3)   SEGMENT INFORMATION (Continued)

 

Years Ended December 31,

 

2001

2000

1999

Net revenues from unaffiliated customers:

 

 

 

Manipulator/Docking Hardware

$19,986 

$39,556

$26,423

Temperature Management

25,724 

33,505

19,089

Tester Interface

  5,917 

 14,590

   8,073

 

$51,627 

$87,651

$53,585

Affiliate sales or transfer from:

 

 

 

Manipulator/Docking Hardware

$  914 

$ 2,087

$ 2,049

Temperature Management

1,031 

136

506

Tester Interface

    923 

  1,873

    502

 

$2,868 

$4,096

$3,057

Depreciation/amortization:

 

 

 

Manipulator/Docking Hardware

$1,283 

$1,114

$781

Temperature Management

518 

562

495

Tester Interface

    381 

    398

    153

 

$2,182 

$2,074

$1,429

Operating income (loss):

 

 

 

Manipulator/Docking Hardware

$ (6,957)

$ 7,677

$5,477

Temperature Management

(717)

1,801

1,005

Tester Interface

  (7,015)

   1,431

   845

 

$(14,689)

$10,909

$7,327

Earnings (loss) before income taxes:

 

 

 

Manipulator/Docking Hardware

$ (6,539)

$8,319

$5,884

Temperature Management

(584)

1,830

829

Tester Interface

  (7,015)

   1,430

   845

 

$(14,138)

$11,579

$7,558

Income tax expense (benefit):

 

 

 

Manipulator/Docking Hardware

$(1,988)

$2,857

$2,298

Temperature Management

(91)

1,738

(1,210)

Tester Interface

   (730)

   605

   337

 

$(2,809)

$5,200

$1,425

Net earnings (loss):

 

 

 

Manipulator/Docking Hardware

$ (4,551)

$5,461

$3,586

Temperature Management

(493)

92

2,039

Tester Interface

  (6,285)

   826

   508

 

$(11,329)

$6,379

$6,133

Identifiable assets:

 

 

 

Manipulator/Docking Hardware

$17,015 

$25,718

$27,206

Temperature Management

11,652 

14,661

11,395

Tester Interface

   3,101 

   6,923

   4,414

 

$31,768 

$47,302

$43,015

 

We do not currently allocate corporate overhead to our subsidiaries. All costs associated with our executive management team are charged to the Cherry Hill, New Jersey operation which is included in the manipulator/docking hardware segment. The $4,612 charge for impairment of goodwill in 2001 was incurred by the tester interface segment, the $2,672 of merger-related costs in 2000 were incurred by the temperature management segment, and the $415 write-off of deferred offering costs in 2000 was incurred by the manipulator/docking hardware segment. Substantially all interest income is generated by our three Delaware holding companies, whose results are also included in the manipulator/docking hardware segment.

Export sales from our domestic manufacturing facilities (New Jersey, California and Massachusetts) totaled $9,009, $22,983 and $16,280 during the years ended December 31, 2001, 2000 and 1999, respectively. During the years ended December 31, 2001, 2000 and 1999, we had sales to Japan of $5,345, $10,134 and $5,737, respectively. Our foreign subsidiaries generated $6,959, $13,707 and $8,522 of net revenues in 2001, 2000 and 1999, respectively.
                                                                                                            F - 11



inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(4)
  MAJOR CUSTOMERS

Agilent Technologies accounted for 15% of our consolidated net revenues in 2001. No customer accounted for more than 10% of our consolidated net revenues in 2000 or 1999.


(5)
  INVENTORIES

Inventories held at December 31 were comprised of the following:

 

2001

2000

Raw materials

$3,960 

$ 7,160 

Work in process

2,362 

3,785 

Finished goods

  1,232 

   1,614 

 

$7,554 

$12,559 

 

(6)   DEBT

Line of Credit

As of December 31, 2001, we have a $5,000 committed, unsecured line of credit of which $4,800 was available to borrow (the $5,000 committed amount less $200 in letters of credit we have issued to third parties under this line). Borrowings under this line of credit are principally used for working capital purposes. Borrowings on the line of credit bear interest at either the prime rate minus 1.0% or the Euro-rate plus 1.5%, which is payable monthly on any outstanding balance. The Company is required to maintain a $50 compensating balance at the bank which granted the line of credit. At December 31, 2001, there were no borrowings outstanding. This line of credit is due to expire September 30, 2002.

We are currently negotiating with the bank which issued this line of credit to modify this facility to extend the maturity for a period of two years. We expect that the amended agreement will provide for the granting of a security interest in most of our domestic assets and the addition of certain negative covenants.

Letter of Credit

We have an outstanding letter of credit in the amount of $200 as of December 31, 2001. This letter of credit was issued as a security deposit under a lease which our Temptronic subsidiary entered into for its new facility in Sharon, Massachusetts.

Capital Lease Obligations

On January 31, 2001, we entered into two capital lease agreements to finance equipment purchases. The minimum lease payments under the capital leases in effect at December 31, 2001 are as follows:

2002

$105

2003

105

2004

105

2005

104

2006

  17

Total minimum lease payments

436

    Less: Amount representing interest

  59

Present value of minimum lease payments

377

    Less: Current installments under capital leases

  81

 

 

Obligations under capital lease, excluding current installments

$296

 

F - 12

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(7)
  STOCK OPTION PLAN

The Amended and Restated 1997 Stock Plan (the "Plan") provides for the granting of either incentive stock options or non-qualified stock options to purchase shares of our common stock and for other stock-based awards to key employees and directors responsible for our direction and management and to non-employee consultants. The Plan consists of two parts: the Non-Qualified Plan (administered by our Board of Directors) and the Key Employee Plan (administered by the Compensation Committee of our Board of Directors). We have reserved 1,100,000 shares of common stock for issuance upon exercise of options or stock awards under the Plan.

No option may be granted with an exercise period in excess of ten years from the date of grant. Generally, incentive stock options will be granted with an exercise price equal to the fair market value on the date of grant; the exercise price of non-qualified stock options will be determined by either the Board of Directors or the Compensation Committee of the Board of Directors. The options which have been issued under the Plan generally vest 20% one year from date of grant and 20% in each of the succeeding four years.

In connection with the merger with Temptronic, outstanding incentive and non-qualified stock options to acquire Temptronic common stock were converted into 175,686 stock options to acquire our stock at a conversion ratio of 0.925, with appropriate adjustment to the exercise price. These stock options, which were issued outside of the Plan, generally vest over four to five years.

As discussed in Note 2, we have elected to continue to follow APB 25 in accounting for our stock option plans. Under APB 25, we do not recognize compensation expense on the issuance of stock options to employees and non-employee directors when the option terms are fixed and the exercise price equals the fair value of the underlying stock on the grant date. Prior to the merger, Temptronic had granted certain non-qualified stock options to employees which had an exercise price below the estimated fair value of Temptronic's common stock at the date of grant. For these options, compensation cost, equaling the difference between the fair market value of the underlying stock and the cost to exercise the options, was recorded as deferred compensation at the date of grant. This cost is amortized to expense as the options vest. Total compensation cost recognized for the years ended December 31, 2001, 2000 and 1999 was $58, $41, $75, respectively.

Had compensation costs for our stock-based compensation plans been determined consistent with SFAS No. 123, our net earnings (loss) and net earnings (loss) per common share for the years ended December 31, 2001, 2000 and 1999 would have been reduced to the pro forma amounts indicated below:

 

2001

2000

1999

Net earnings (loss):

 

 

 

    As reported

$(11,329)

$6,379

$6,133

    Pro forma

$(11,808)

$5,416

$5,988

Net earnings (loss) per common share -- basic:

 

 

 

    As reported

$(1.37)

$0.78

$0.76

    Pro forma

$(1.43)

$0.66

$0.74

Net earnings (loss) per common share -- diluted:

 

 

 

    As reported

$(1.37)

$0.75

$0.74

    Pro forma

$(1.43)

$0.64

$0.72

 

The fair value for stock options granted in 2001 and 2000 was estimated at the date of grant using the Black-Scholes option pricing model with the following weighted average assumptions (no options were granted in 1999):

 

2001

2000

Risk-free interest rate

4.40%

4.99%

Dividend yield

0.00%

0.00%

Expected common stock market price volatility factor

1.01

.82

Weighted average expected life of stock options

5 years

5 years

 

The per share weighted average fair value of stock options issued in 2001 and 2000 was $2.91 and $8.92, respectively.

The Black-Scholes option valuation model was developed for use in estimating the fair value of traded options which have no vesting restrictions and are fully transferable. In addition, option valuation models require the input of highly subjective assumptions including the expected stock price volatility. As our stock options have characteristics significantly different from those of traded options, and as changes in the subjective input assumptions can materially affect the fair value estimate, in management's opinion, the existing models do not necessarily provide a reliable single measure of the fair value of our stock options.
                                                                                                         F - 13

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)



(7)   STOCK OPTION PLAN (Continued)

The following table summarizes the stock option activity for the three years ended December 31, 2001:

 



Number
of Shares

Weighted
Average
Exercise
Price

Options outstanding, January 1, 1999 (215,637 exercisable)

585,691 

$ 3.91

   Granted

-- 

--

   Exercised

(33,138)

.10

   Canceled

  (79,598)

  3.40

Options outstanding, December 31, 1999 (202,464 exercisable)

472,955 

4.26

   Granted

642,000 

13.08

   Exercised

(83,088)

2.70

   Canceled

    (6,865)

 14.76

Options outstanding, December 31, 2000 (196,386 exercisable)

1,025,002 

9.84

   Granted

361,000 

5.81

   Exercised

(34,674)

2.91

   Canceled

 (329,403)

 14.20

Options outstanding, December 31, 2001 (386,930 exercisable)

1,021,925 

$ 6.62

 

The following table summarizes information about stock options outstanding at December 31, 2001:





Range of
Exercise Prices




Number
Outstanding at
December 31, 2001




Weighted
Average
Remaining Life

Weighted
Average
Excercise
Price of
Outstanding
Options



Number
Exercisable
at
December 31, 2001

Weighted
Average
Exercise
Price of
Exercisable
Options

 

 

 

 

 

 

$0.02

5,550

5.50 years

$0.02

--

$0.02

$2.99 - $3.35

287,500

9.86 years

$3.20

41,875

$3.35

$3.79 - $4.44

160,775

5.77 years

$4.17

109,575

$4.13

$6.00 - $6.75

161,100

6.21 years

$6.13

106,080

$6.00

$9.56 - $12.69

407,000

8.63 years

$10.28

129,400

$11.17

 

(8)   COMMITMENTS

We lease our offices, warehouse facilities, automobiles and certain equipment under noncancellable operating leases which expire at various dates through 2011. Total rental expense for the years ended December 31, 2001, 2000 and 1999 was $2,241, $1,696 and $1,227, respectively.

The aggregate minimum rental commitments under the noncancellable operating leases in effect at December 31, 2001, are as follows:

2002

$1,895

2003

$1,814

2004

$1,708

2005

$1,325

2006

$1,266

Thereafter

$4,979

F - 14



inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)

 

(9)   INCOME TAXES

We are subject to Federal and certain state income taxes. In addition, we are taxed in certain foreign countries. The cumulative amount of undistributed earnings of foreign subsidiaries for which U.S. income taxes have not been provided was approximately $3,685 and $4,825 at December 31, 2001 and 2000, respectively.

Total income tax expense (benefit) was allocated as follows:

 

Years Ended December 31,

 

2001

2000

1999

Income (loss) from operations

$(2,809)

$5,200 

$1,425

Stockholders' equity, for tax benefit derived from
  exercise and sale of stock option shares


     (22)


  (454)


       -

 

$(2,831)

$4,746 

$1,425

 

Earnings (loss) before income taxes were as follows:

 

Years Ended December 31,

 

2001

2000

1999

Domestic

$(13,618)

$ 8,511

$5,949

Foreign

     (520)

   3,068

 1,609

 

$(14,138)

$11,579

$7,558

 

Income tax expense (benefit) was as follows:

 

Years Ended December 31,

 

2001

2000

1999

Current

 

 

 

    Domestic -- Federal

$(2,585)

$3,922 

$1,934 

    Domestic -- state

(69)

165 

215 

    Foreign

     (83)

   989 

   652 

 

  (2,737)

 5,076 

 2,801 

Deferred:

 

 

 

    Domestic -- Federal

(143)

(171)

(946)

    Domestic -- state

      71 

   295 

  (430)

 

     (72)

   124 

(1,376)

Income tax expense (benefit)

$(2,809)

$5,200 

$1,425 

 

Deferred income taxes reflect the net tax effect of net operating loss and credit carryforwards and temporary differences between the carrying amount of assets and liabilities for financial reporting purposes and the amounts used for income tax purposes. The following is a summary of the significant components of our deferred tax assets and liabilities as of December 31, 2001 and 2000:

 

F - 15

 

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(9)
  INCOME TAXES (Continued)

 

December 31,

 

2001

2000

Deferred tax assets:

 

 

    Accrued vacation pay

$  180 

$  264 

    Allowance for doubtful accounts

47 

69 

    Inventories

949 

609 

    Accrued warranty

171 

143 

    Accrued bonuses

141 

271 

    Net operating loss and credit carryforward

90 

90 

    Stock compensation

62 

90 

    Property and equipment

56 

120 

    Other

     66 

     57 

 

1,762 

1,713 

Valuation allowance

   (178)

    (90)

Deferred tax assets

  1,584 

  1,623 

Deferred tax liabilities:

 

 

    Accrued royalty income

    (15)

   (126)

Deferred tax liabilities

    (15)

   (126)

 

 

 

Net deferred tax asset

$1,569 

$1,497 

 

The valuation allowance for deferred tax assets as of the beginning of 2001 and 2000 was $90 and $90, respectively. The net change in the valuation allowance for the years ended December 31, 2001 and 2000 was an increase of $88 and $0, respectively. In assessing the ability to realize the deferred tax assets, we consider whether it is more likely than not that some portion or all of the deferred tax assets will not be realized. The ultimate realization of deferred tax assets is dependent upon the generation of future taxable income during periods in which those temporary differences become deductible. We consider the scheduled reversal of deferred tax liabilities, projected future taxable income and tax planning strategies in making this assessment. In order to fully realize the total deferred tax assets, we will need to generate future taxable income prior to the expiration of net operating loss and credit carryforwards which expire in various years through 2019. Based upon the level of historical taxabl e income and projections for future taxable income over the periods in which the temporary differences are deductible, we believe it is more likely than not that we will realize the benefit of the deferred tax asset, net of the valuation allowance, at December 31, 2001. The amount of the deferred tax asset considered realizable, however, could be reduced in the near term if estimates of future taxable income during the carryforward period are reduced.

An analysis of the effective tax rate for the years ended December 31, 2001, 2000 and 1999 and a reconciliation from the expected statutory rate of 34%, 35% and 34%, respectively, are as follows:

 

 

Years Ended December 31,

 

 

2001

2000

1999

Expected income tax provision at U.S. statutory rate

$(4,807)

$4,053 

$2,570 

State taxes, net of Federal benefit

299 

157 

Increase (decrease) in tax from:

 

 

 

 

Non-deductible merger-related costs

815 

 

Liquidation of life insurance policies

83 

 

Non-deductible goodwill and other permanent differences

1,913 

69 

28 

 

Foreign income tax rate differences

92 

(85)

58 

 

Federal credits

(51)

 

Change in valuation allowance related to Federal

(1,418)

 

Other

      (8)

   (34)

     81 

Income tax expense (benefit)

$(2,809)

$5,200 

$1,425 


F - 16

 

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)


(10)   EMPLOYEE BENEFIT PLANS

We have a defined contribution 401(k) plan for our employees who work in the U.S. All permanent employees of inTEST Corporation and inTEST Sunnyvale Corp. who are at least 18 years of age are eligible to participate in the plan. During the first quarter of 2001 and the years ended December 31, 2000 and 1999, we matched employee contributions dollar for dollar up to 10% of the employee's annual compensation up to $5. Effective April 1, 2001, the 401(k) plan matching contributions were temporarily suspended due to our cost containment efforts. Future matching contributions are discretionary. Employer contributions vest over a six-year period. We contributed $77, $299 and $221 to the plan for the years ended December 31, 2001, 2000 and 1999, respectively.

Temptronic adopted a defined contribution 401(k) plan for its domestic employees in 1988. All permanent employees who are at least 21 years of age are eligible to participate in the plan. Under the plan, Temptronic may make discretionary matching contributions to be determined annually by Temptronic up to 6% of the employees' annual compensation. Effective October 1, 2001, the 401(k) plan matching contributions were temporarily suspended due to our cost containment efforts. Employer contributions vest over a seven-year period. Temptronic contributed $176, $74 and $56 to the plan for the years ended December 31, 2001, 2000 and 1999, respectively.

Temptronic established the EPP covering substantially all employees in 1982. On November 6, 1996, in exchange for a note receivable, Temptronic loaned the EPP $3,668 to purchase 565,483 shares of stock from certain former stockholders of Temptronic. We agreed to make an annual contribution to the EPP in the amount of the principal plus interest due on the note receivable. This note receivable bore interest at 10% and was scheduled to mature on September 30, 2011. A portion of the total shares acquired with the proceeds of the note were allocated to participant accounts on September 30 of each plan year as the note receivable was repaid. The original amount of the note from the EPP was recorded as a reduction of stockholders' equity. The reduction in stockholders' equity was offset when the annual contributions were made.

On July 2, 2001, the EPP was terminated. Upon termination, the 375,982 remaining unallocated shares were returned to us in satisfaction of the remaining unpaid principal amount of the note at that time. These shares have been recorded as treasury stock in the accompanying consolidated financial statements. Based on a stock price of $6.18 on July 2, 2001, the value of the unallocated shares returned to us was approximately $604 less than the remaining principal of the note receivable as of that date. This difference was recorded as a reduction of additional paid in capital. We have filed an application for a favorable determination with respect to the termination of the EPP with the Internal Revenue Service. This determination, when received, will have no impact on the accounting for the termination of the EPP.


(11)
  ACCRUED EXPENSES

Accrued expenses consist of the following:

 

December 31,

 

2001

2000

Accrued compensation

$  958

$1,630

Accrued warranty costs

451

367

Accrued commissions

306

870

Accrued professional fees

145

166

Accrued merger-related costs

-

239

Accrued other

   240

   296

 

 

 

 

$2,100

$3,568

 

(12)   RELATED PARTY TRANSACTIONS

We paid consulting fees which totaled $94, $59 and $67 during the years ended December 31, 2001, 2000 and 1999, respectively, to one individual who is a member of our Board of Directors. We paid consulting fees to one individual who is one of our executive officers (prior to his employment as an executive officer) totaling $44 in 2001.

Some of our foreign subsidiaries paid directors' fees to individuals who are our executive officers which totaled $85, $113 and $119 during the years ended December 31, 2001, 2000 and 1999, respectively.

 

F - 17

inTEST CORPORATION
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
(In thousands, except share and per share data)

(12)   RELATED PARTY TRANSACTIONS (Continued)

Temptronic has transactions in the normal course of business with Hakuto Co. Ltd. As of December 31, 2001, a wholly-owned subsidiary of Hakuto Co. Ltd., Hakuto America Holdings, Inc., owned 647,500 shares of our outstanding stock. During the years ended December 31, 2001, 2000 and 1999, Temptronic sold product at market prices totaling approximately $2,674, $1,469 and $1,510, respectively, to Hakuto Co. Ltd. At December 31, 2001 and 2000, accounts receivable from Hakuto Co. Ltd. amounted to approximately $182 and $351, respectively.

(13)   LEGAL PROCEEDINGS

From time to time we are a party to legal proceedings. We are not currently involved in any legal proceedings the resolution of which could have a material effect on our business, our financial position or our results of operations. On December 15, 2000, however, we filed a complaint in the U.S. District Court for the District of Delaware against Credence Systems Corporation claiming infringement of our U.S. patent number 4,589,815 and seeking damages and injunctive relief. Since that time, we commenced the process of discovery, which process is ongoing, and through which we will quantify our damages. We do not believe that this action will have a material effect on our business, financial condition or results of operations.

(14)   QUARTERLY CONSOLIDATED FINANCIAL DATA (Unaudited)

The following tables present certain unaudited consolidated quarterly financial information for each of the eight quarters ended December 31, 2001. In our opinion, this quarterly information has been prepared on the same basis as the consolidated financial statements and includes all adjustments (consisting only of normal recurring adjustments) necessary to present fairly the information for the periods presented. The results of operations for any quarter are not necessarily indicative of results for the full year or for any future period.

Our business is not seasonal; therefore year-over-year quarterly comparisons of our results of operations may not be as meaningful as the sequential quarterly comparisons set forth below which tend to reflect the cyclical activity of the semiconductor industry as a whole. Quarterly fluctuations in expenses are related directly to sales activity and volume and may also reflect the timing of operating expenses incurred throughout the year.

 

Quarters Ended

 

 

3/31/01

6/30/01

9/30/01

12/31/01

Total

Net revenues

$20,105

$16,675 

$  7,428 

$  7,419

$51,627 

Gross margin

7,963

5,532 

(1,747)

963

12,711 

Earnings (loss) before income taxes

1,441

42 

(12,184)

(3,437)

(14,138)

Income tax expense (benefit)

583

78 

(2,360)

(1,110)

(2,809)

Net earnings (loss)

858

(36)

(9,824)

(2,327)

(11,329)

 

 

 

 

 

 

Net earnings (loss) per common share - basis

$0.10

$0.00 

$(1.19)

$(0.28)

$(1.37)

Weighted average common shares outstanding - basic

8,252,139

8,265,932 

8,289,634 

8,308,982 

8,279,356 

 

 

 

 

 

 

Net earnings (loss) per common share - diluted

$0.10

$0.00 

$(1.19)

$(0.28)

$(1.37)

Weighted average common shares and common share
  equivalents outstanding - diluted


8,411,240


8,265,932 


8,289,634 


8,308,982


8,279,356 

 

Quarters Ended

 

 

3/31/00

6/30/00

9/30/00

12/31/00

Total

Net revenues

$20,254

$21,317

$24,491

$21,589

$87,651

Gross margin

9,975

10,506

11,261

7,814

39,556

Earnings before income taxes

2,277

4,354

4,186

762

11,579

Income taxes

1,799

1,560

1,552

289

5,200

Net earnings

478

2,794

2,634

473

6,379

 

 

 

 

 

 

Net earnings per common share - basis

$0.06

$0.34

$0.32

$0.06

$0.78

Weighted average common shares outstanding - basic

8,137,167

8,190,178

8,232,003

8,243,928

8,201,029

 

 

 

 

 

 

Net earnings per common share - diluted

$0.06

$0.33

$0.31

$0.06

$0.75

Weighted average common shares and common share
  equivalents outstanding - diluted


8,465,603


8,528,166


8,475,730


8,424,901


8,469,910

F -18

 

 

inTEST CORPORATION
SCHEDULE II -- VALUATION AND QUALIFYING ACCOUNTS
(in thousands)

 

 

Balance at
Beginning
of Period


Expense
(Recovery)



Deductions

Balance at
End of
Period

Year Ended December 31, 1999

 

 

 

 

Allowance for doubtful accounts

$  221    

$    16    

$    (2)   

$  239    

Warranty reserve

100    

790    

662    

228    

 

 

 

 

 

Year Ended December 31, 2000

 

 

 

 

Allowance for doubtful accounts

239    

31    

29    

241    

Warranty reserve

228    

1,102    

963    

367    

 

 

 

 

 

Year Ended December 31, 2001

 

 

 

 

Allowance for doubtful accounts

241    

(104)   

12    

125    

Warranty reserve

367    

1,044    

960    

451    

 

 

F - 19