Back to GetFilings.com
UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, D.C. 20549-1004
__________________________________________
FORM 10-K
[X] ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
for the fiscal year ended September 30, 2001
or
[_] TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE
SECURITIES EXCHANGE ACT OF 1934
For the transition period from ___ to ___.
Commission File No. 0-21820
__________________________________________
KEY TECHNOLOGY, INC.
(Exact name of Registrant as specified in its charter)
OREGON 93-0822509
(State of Incorporation) (I.R.S. Employer Identification No.)
150 Avery Street, Walla Walla, Washington 99362
(Address of principal executive offices) (Zip Code)
(509) 529-2161
(Registrant's telephone number, including area code)
__________________________________________
Securities registered pursuant to Section 12(b) of the Act:
None
Securities registered pursuant to Section 12(g) of the Act:
Common Stock, no par value
Series B Convertible Preferred Stock, par value $.01 per share
Warrants to purchase Common Stock, dated July 12, 2000
Indicate by check mark whether the Registrant (1) has filed all reports
required to be filed by Sections 13 or 15(d) of the Securities Exchange Act of
1934 during the preceding 12 months (or for such shorter period that the
Registrant was required to file such reports), and (2) has been subject to such
filing requirements for the past 90 days. Yes [X] No [_]
Indicate by check mark if disclosure of delinquent filers pursuant to Item
405 of Regulation S-K is not contained herein, and will not be contained, to the
best of Registrant's knowledge, in definitive proxy or information statements
incorporated by reference in Part III of this Form 10-K or any amendment to this
Form 10-K. [_]
The aggregate market value of the Registrant's common stock held by
non-affiliates on December 18, 2001 (based on the last sale price of such
shares) was approximately $12,828,634.
The number of shares of the Registrant's common stock outstanding on
December 18, 2001 was 4,751,346 shares of common stock.
DOCUMENTS INCORPORATED BY REFERENCE
Parts of Registrant's Proxy Statement dated on or about January 30, 2002
prepared in connection with the Annual Meeting of Shareholders to be held on
February 20, 2002 are incorporated by reference into Part III of this Report.
KEY TECHNOLOGY, INC.
2001 FORM 10-K
TABLE OF CONTENTS
PART I PAGE
----
Item 1. BUSINESS ...................................................... 1
Item 2. PROPERTIES .................................................... 12
Item 3. LEGAL PROCEEDINGS ............................................. 13
Item 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS ........... 13
PART II
Item 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED
STOCKHOLDER MATTERS ........................................... 13
Item 6. SELECTED FINANCIAL DATA ....................................... 16
Item 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL
CONDITION AND RESULTS OF OPERATIONS ........................... 17
Item 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT
MARKET RISK .................................................. 24
Item 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA ................... 26
Item 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON
ACCOUNTING AND FINANCIAL DISCLOSURE ........................... 51
PART III
Item 10. DIRECTORS AND EXECUTIVE OFFICERS OF THE REGISTRANT ............ 51
Item 11. EXECUTIVE COMPENSATION ........................................ 52
Item 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS
AND MANAGEMENT ................................................ 52
Item 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS ................ 52
PART IV
Item 14. EXHIBITS, FINANCIAL STATEMENT SCHEDULES, AND REPORTS ON
FORM 8-K ...................................................... 53
SIGNATURES .............................................................. 56
EXHIBIT INDEX ........................................................... 57
PART I
Certain statements set forth below may constitute "forward-looking
statements" within the meaning of the Private Securities Litigation Reform Act
of 1995. The forward-looking statements involve known and unknown risks,
uncertainties and other factors that may cause the actual results, performance
or achievements to differ from those expressed or implied by the forward-looking
statements. With respect to the Company, the following factors, among others,
could cause actual results or outcomes to differ materially from current
expectations:
. the Company's inability to meet its potential equity redemption obligations
in July 2002 when it may be required to redeem for cash all or a portion of
its outstanding preferred stock or at any time when it may be required to
redeem certain warrants;
. the effect of the Company's substantial debt on its operations and future
growth; o the Company's inability to obtain additional financing in the
future;
. the effect on the Company's business of adverse economic conditions in the
food processing industry and other industries served by the Company;
. the performance and needs of industries served by the Company and the
financial capacity of customers in these industries to purchase capital
equipment;
. the ability to achieve revenue growth;
. the ability of new products to compete successfully in either existing or
new markets;
. competitive factors;
. the risks involved in expanding international operations and sales;
. achievement of product performance specifications and any related effect on
product upgrade or warranty expenses;
. the potential for adverse fluctuations in foreign currency exchange rates;
. the effect of product or market development activities;
. availability and future costs of materials and other operating expenses;
. uncertainties relating to patents and proprietary information;
. the potential for patent-related litigation expenses and other costs
resulting from claims asserted against the Company or its customers by
third parties; and
. other factors discussed in Exhibit 99.1 hereto which is incorporated herein
by reference.
Given these uncertainties, readers are cautioned not to place undue reliance on
the forward-looking statements. The Company disclaims any obligation
subsequently to revise or update forward-looking statements to reflect events or
circumstances after the date of such statements or to reflect the occurrence of
anticipated or unanticipated events.
ITEM 1. BUSINESS.
General
Key Technology, Inc. (the "Company") was founded in 1948 as a local
producer of vegetable processing equipment and has evolved into a worldwide
supplier of process automation solutions to the food processing industry and
other industries such as tobacco, plastics and pharmaceuticals. The present
Company was incorporated in 1982 as a result of a management buyout of the
predecessor organization.
1
The Company and its operating subsidiaries design, manufacture, sell and
service process automation systems that process product streams of discrete
pieces to improve safety and quality. These systems integrate electro-optical
automated inspection and sorting systems with process systems which include
specialized conveying and preparation systems. The Company provides parts and
service for each of its product lines to customers throughout the world.
Industries served include food processing and non-food and industrial
applications such as tobacco, plastics, and pharmaceuticals.
During fiscal 2001, the Company's net sales were $73.0 million compared to
sales of $67.4 million in fiscal 2000. The Company incurred a net loss of $4.9
million, or $1.24 per share, for the year ended September 30, 2001, which
included merger-related amortization and non-recurring integration costs of $3.4
million, or $2.1 million after tax, and the loss on the sale of Ventek of $2.1
million. Excluding these merger-related and non-recurring integration costs, as
well as the loss on the sale of Ventek, the net loss would have been $643,000,
or $0.33 per diluted share. The loss for fiscal 2001 compares with a reported
net loss of $333,000, or $0.12 per diluted share, for fiscal 2000, which
included merger-related and one-time acquisition costs of $3.0 million or $1.9
million after tax. Excluding merger-related and one-time acquisition charges,
net earnings would have been $1.6 million or $0.29 per diluted share for the
year ended September 30, 2000.
The Company acquired two separate organizations during fiscal 2000. On June
1, 2000 the Company acquired Farmco, Inc. and its sister company Ro-Tech, Inc.
(collectively "Farmco"). Both companies are based in Redmond, Oregon. Farmco
manufactures and sells equipment that mechanically sorts, grades, selects, or
removes product based upon its size or shape. Ro-Tech, Inc. performed research
and development activities for Farmco products and owned the intellectual
property associated with Farmco products. On July 12, 2000 the Company acquired
Advanced Machine Vision Corporation (AMVC), a company based in Medford, Oregon.
AMVC and its subsidiaries design, manufacture and market machine vision systems
that combine lighting, camera, processor and software technologies to improve
quality, enhance yield, reduce production costs and increase throughput in a
variety of markets. Applications include systems for the food, tobacco, plastics
recycling, pulp wood, and wood panel industries.
Prior to September 30, 2001, the Company committed to a plan to sell
Ventek, Inc. ("Ventek"), a wholly-owned subsidiary that supplies machine vision
systems to the forest products industry. Ventek was acquired by Key as part of
its acquisition of AMVC in July 2000.
The Company's domestic operations are headquartered in Walla Walla,
Washington with manufacturing facilities in Walla Walla, Washington and Redmond,
Oregon. The Company moved the manufacturing activities acquired from AMVC from
Medford to Walla Walla in fiscal 2001, but continues to maintain a presence in
Medford performing research and development, service and sales activities. The
Company supplies all product groups - automated inspection systems and process
systems - to customers in its primary markets through common sales and
distribution channels. In addition, the Company supplies parts and service
through its worldwide service organization.
Industry Background
The Company considers the size and variety of worldwide processing
industries to be a significant opportunity for growth, not only to solve
existing quality and safety issues, but also to assist in providing safe
processing technologies to expanding global markets. Accordingly, the Company
2
devoted increased resources in fiscal 2001 to selling and marketing activities
and new product research and development that will increase the Company's
ability to address these potential global markets.
Food Processing Industry
Food processors must process large quantities of raw product through
different stages, including sorting to remove defective pieces and inspection
for product quality and safety. The frequency and severity of defects in the raw
product is highly variable depending upon local factors affecting crops.
Historically, defect removal and quality control in the food processing industry
have been labor intensive and dependent upon and limited by the variability of
the work force. The industry has sought to replace manual methods with automated
systems that achieve higher yield, better product quality and safety and reduced
cost.
The Company's strategy is to solve processing industry problems of high
labor costs, inadequate yields and inconsistent quality and safety by providing
automated inspection systems and process systems. The Company's process
automation systems use advanced optical inspection technology to improve product
yield (more of the good product recovered) and quality (higher percentage of
defective product being removed) over the manual sorting and defect removal
methods historically used by food processors. In a typical application, process
automation systems can replace 25 to 75 processing line employees, resulting in
labor cost savings and improved yield sufficient to pay for the system in less
than one year, as well as providing significant improvements in product quality.
The global food processing industry is currently in a consolidation period
and is facing low single-digit growth rates. Market conditions may point to
further consolidations in the future. The consolidations in the food processing
industry have resulted in Key's customers delaying investment in it's products.
Key believes the food processing companies that emerge from this consolidation
period will be financially stronger, however these surviving companies will be
looking for ways to improve product quality and safety, as well as ways to make
themselves more competitive. Since Key's equipment results in higher product
yields, improved product quality and safety, as well as reduced processing
costs, Key believes these surviving companies will have more interest in its
products allowing for expanded sales into this industry in future years.
Non-food Industries - Tobacco, Pharmaceuticals & Plastics
Processors in non-food industries are also implementing systems solutions to
reduce costs, increase yields, and produce higher quality products that are safe
for consumers.
The largest non-food processing market is the tobacco industry. With the
acquisition of AMVC and its subsidiary SRC Vision, which has an installed base
of over 100 units in the tobacco industry, the Company significantly increased
its potential opportunities in this market and may be able to introduce other
products along with automated inspection systems to tobacco customers. At
present, the pharmaceutical, plastics and other non-food industries represent a
relatively small share of the Company's sales and installed base. However, to
further its growth strategy, the Company is actively pursuing expansion into new
markets, some of which have the potential for higher profit margins. The
Company believes that many additional applications for its products exist in
both food and non-food markets, particularly in the area of automated process
control.
3
Products
The Company has developed a modular family of product lines that can be
configured in a variety of ways and integrated to provide complete solutions for
specific applications. Advances in any one module can therefore benefit a number
of the Company's products. Despite the incorporation of sophisticated
technology, the Company's products can be operated by plant personnel with
minimal specialized training and are built to withstand the harsh environments
found in processing plants.
The following table sets forth sales by product category for the periods
indicated:
Fiscal Year Ended September 30,
--------------------------------------------------------
2001 2000 1999
------------ ------------ ------------
(in thousands)
Automated inspection systems ..................... $26,884 $24,002 $22,342
Process systems .................................. 27,050 26,414 33,950
Parts and service/contracts ...................... 19,020 16,996 13,239
------------ ------------ ------------
Net sales ................................. $72,954 $67,412 $69,531
============ ============ ============
Service and maintenance contracts are less than 10% of total net sales and
therefore are summarized with parts.
The following table sets forth the percent of the total gross margin
contributed by each product category for the periods indicated:
Fiscal Year Ended September 30,
--------------------------------------------------------
2001 2000 1999
------------ ------------ ------------
Automated inspection systems ..................... 39% 40% 39%
Process systems .................................. 32% 28% 41%
Parts and service/contracts ...................... 29% 32% 20%
------------
------------ ------------ ------------
Total gross margin ........................ 100% 100% 100%
============ ============ ============
Automated Inspection Systems
Automated inspection systems are used in various applications to detect and
eliminate defects, most often during processing of raw products. The Company's
systems within this group include the ADR(R) and Tegra(R) systems, representing
the fourth generation of automated inspection systems designed by Key
Technology; Prism(R) and Tobacco Sorter II(TM) and Tobacco Sorter 3(TM) designed
by SRC Vision; and the new Optyx(TM) automated inspection system, designed by
the merged companies. All systems are now manufactured at the Walla Walla
manufacturing facility.
Nearly all systems in this group use proprietary linear array charged
coupled device ("CCD") mono-chromatic, color or multi-spectral cameras. Each of
the cameras scan the product-streams, which move at 5 to 20 feet per second, at
the rate of 1,500 to 4,000 times per second and can identify defects as small as
1/16 of an inch (1.5 mm) in diameter. Systems with monochromatic cameras
generally are sold at lower price levels and are most effective for product that
has a marked disparity in shade between the defective and the good product.
Systems with color cameras are required when a variety of defect and product
colors occur simultaneously or when the difference in shading between the
defective and the good product is more subtle. In 1998, the Company developed
multi-spectral
4
systems which utilize either infrared or ultraviolet technologies, individually
or in combination with visible light, to identify defects that may not be
detectable by using solely visible light spectra.
Tegra System. In fiscal 1996, the Company introduced its fourth generation
of automated inspection system sorters. Named Tegra, this generation of
automated inspection systems incorporates a number of technological and
mechanical advances that result in significant improvements to processing
efficiency and product throughput with higher recovery and defect-removal rates.
Certain present and potential applications for Tegra systems include potato
products, green beans, dried beans, corn, carrots, peas, spinach and other leafy
vegetables, pears, nuts, grains, coffee and tobacco.
Tegra incorporates object-specific IntelliSort(TM) technology. IntelliSort
sorting technology recognizes not only color and size, but also shape. This
capability provides a solution to previously difficult sorting problems, such as
differentiation between green beans and green bean stems. Tegra cameras are
capable of high fidelity color-image processing to scan product at a rate of
over 4,000 times per second, offering a sensitivity to color subtleties beyond
human vision. Tegra also incorporates KeyWare(R) software that substantially
reduces operational complexity. KeyWare consists of application packages, each
specifically designed for a single product category that, together with the
system's computer hardware capability and networking software, support all
standard factory control and automation interfaces. These features allow Tegra
to establish data connectivity and communication with a processing plant's
computer network system.
Prism System. In 1999, SRC Vision introduced the new Prism sorting system.
Designed for stable performance in challenging environments, Prism has gained
strong acceptance in segments of the fruit, vegetable and snack food markets. It
incorporates optional sensing of short-wave infrared light, uses a novel
broad-band illumination system, and is designed to require minimal maintenance.
In addition to present and potential applications in potato products,
vegetables, fruits, plastics, and snack foods, Prism adds specific applications
with products such as dehydrated potato flakes, plastic flake and peaches.
Prism incorporates a new image processing module, the "Advanced Vision
Processor" ("AVP(TM)"). Introduced concurrently with Prism, AVP uses a high
speed serial processor to convert color camera signals into product separation
actions. It incorporates the latest in high frequency bus architecture, and
incorporates cameras that have eight times the color resolution of previous
generations. Designed for flexibility, AVP is comprised of modules that provide
an on-going upgrade path, minimizing sustaining development costs, and
maximizing the effective life of the design. AVP uses a powerful combination of
a high speed "super-pipelined" sorting engine with a Windows NT-based user
interface. An internal communication network enables detailed self-diagnosis to
be performed on many system components.
Tobacco Sorter II and Tobacco Sorter 3. The tobacco industry has special
requirements in the handling and sorting of its tobacco products, which vary in
size and moisture content and other properties depending upon the type of
product being produced and the point of handling and inspection. SRC Vision's
Tobacco Sorter 3 (TS3), introduced worldwide in 2001, utilizes the machine
vision engine of the Prism System in a specially constructed frame, enclosure,
and material handling arrangement to meet the specific product inspection
requirements of this industry. In addition to the large installed base of its
predecessor, Tobacco Sorter II, the new TS3 has now been installed successfully
in North America, Latin America, Europe and Asia. Customers have benefited from
5
TS3's improved color resolution, significantly enhanced data communications
capability, and reduced maintenance requirements.
Optyx System. In fiscal 2001, the company developed and introduced its new
automated inspection system named Optyx. The Optyx system was developed by the
combined research and development organizations of Key Technology and SRC
Vision. The new sorter incorporates the best technologies of both companies to
create a sorter that maintains the power and sorting capabilities of a large
sorter in an economical and compact machine. Optyx employs the advanced camera,
lighting, image processing, and ejection technologies used in the Tegra and
Prism products. The lower cost Optyx system is ideal for smaller processors and
lower volume processing lines which were previously unable to justify the
expense of a larger sorter. Present and potential applications include the
Company's traditional fruit, vegetable and tobacco markets. The Optyx system has
successfully proven its technical capabilities at several beta site locations
and the Company has received orders for several Optyx systems.
ADR System. The Company's ADR systems are used to transport, inspect and
remove defects from french fry potatoes. The Company believes its ADR system is
the principal optical inspection and defect removal system used in the french
fry processing industry. The Company's full-capacity ADR systems can process up
to 27,000 pounds of product per hour.
Pharmaceutical Inspection System. In fiscal 1996, the Company purchased
certain inventory, trademarks and patents related to a pharmaceutical inspection
product line, the I-300 Pharmaceutical Inspection System, from the Imaging
Division of Oncor, Inc. Using patented spatial color analysis technology, this
product line inspects solid-dose pharmaceuticals, including tablets, capsules
and softgels for broken or missing pieces, foreign products, discoloration or
coating defects, as well as the integrity of capsules. The pharmaceutical
inspection system also verifies and detects color, size, location and shape
defects at processing rates over one million pieces per hour. Sales of this
product line are a minor contributor to automated inspection system revenues.
Process Systems
Conveying and other custom designed processing systems are utilized
throughout the food industry, as well as other industries, to move large
quantities of product within a processing plant. The Company's process systems
include the Iso-Flo(R), Horizon(TM), Marathon(TM), and Impulse(TM) vibratory
conveyor systems. The Farmco acquisition added another significant product
group, that is made up of mechanical sizing, sorting, separating and grading
equipment. In addition, the product line includes food pumping systems, belt
conveyors, spiral elevators and other custom designed conveying technologies.
Iso-Flo Vibratory Conveying Systems. The Company's principal specialized
conveying system is its Iso-Flo vibratory conveyor system, which was introduced
in 1978. The Iso-Flo conveyor is a type of pan conveyor. Pan conveyors are
common throughout industries that process product streams of discrete pieces,
especially the food processing industry. Pan conveyors move product pieces by
vibrating the pan at high frequency along a diagonal axis, upward and forward.
This action propels the product ahead in small increments and distributes it
evenly for close control of movement and presentation.
6
Iso-Flo systems are used in a variety of processing applications, including
potato products, vegetables and fruits (green beans, peas, carrots, corn,
peaches, pears, cranberries and apples), snack foods, cereals, pet foods,
poultry, seafood and certain nonfood products.
Most Iso-Flo conveyors are custom designed and engineered by the Company to
customer specifications. The Company considers its vibratory conveyor technology
to be a proprietary core competency. As a result of the Company's research and
development activities in fiscal 1999 and 2000, it expanded its family of
vibratory conveyors with the introduction of three new products in the first
quarter of fiscal 2000. These products were the Horizon(TM), the Impulse(TM) and
the Marathon(TM) conveying systems. Initial placements of beta and trial units
were made in fiscal 2000 which resulted in initial sales of all the new products
during fiscal 2001. Product reliability and performance met expectations in all
placements with order and quote volume increasing. During fiscal 2001, activity
in research and development focused on product enhancement options, including
new automated diverters for product movement, vibration sensors, and added
automation and control technologies for all process systems.
The Horizon is a horizontal motion vibratory conveyor that uses a gentle
conveying action to move fragile foods, such as snacks, cereals and
seasoned/coated products, through the processing stages. The design of the
Horizon eliminates vertical bounce of the processor's product. This feature
results in reduced costs to the processor due to minimized product damage,
reduced seasoning/coating loss and elimination of condiment build-up on the
conveying surface.
The Impulse is a line of electromagnetic conveyors which combine the
advantage of quick start/stop with precise metering control. Additionally, the
Impulse conveyor drive systems are oil-free which limits the potential for
contamination and improves the safety of edible food products. This conveyor
system was developed for packaging applications in snack food, dry ingredient,
chemical and pharmaceutical processing.
The Marathon is the Company's longest conveyor and moves product up to 100
feet or more on a single conveyor bed. This conveyor is targeted for use in high
volume applications such as corn, green beans and other bulk conveying markets
to maximize the processor's production efficiency.
The mechanical sizing, sorting, separating, and grading products are used in
many food processing systems. These proprietary rotary sizing and grading
technologies optimize yield, increase packaging efficiency, and improve product
quality primarily by removing small irregular-shaped pieces of product from the
line or separating product into predetermined size categories. In combination
with other Company provided equipment, these products can increase overall line
efficiency and systems capability.
Food Pumping Systems and Belt Conveyors. The Company's hydro food pumping
systems are used to transport food items over distances and elevations in
processing plants. A typical pumping system consists of a stainless steel
contoured tank and food pump to propel the product through lengths of piping to
a water removal/product spreading subsystem. The systems can be configured so
that food processing functions, such as blanching, cooling and cutting, can also
occur during pumping. The Company also designs and manufactures belt conveyors
using a variety of belt materials and frame configurations.
7
Preparation systems. The Company designs and manufactures raw food
preparation systems to prepare vegetables prior to freezing, canning or other
processing. Products in this group include blanchers, air cleaners, air coolers,
froth flotation cleaners, vegetable metering systems, and bulk handling
equipment. These products represent the Company's most mature product line.
Sales of these products over the years have formed a customer base for sales of
other Company products and are also establishing a customer base in markets in
developing countries.
Preparation system revenues may also include a variety of third-party
supplied equipment and installation services which are sold as components of
larger processing lines, for which the Company has assumed turn-key sales
responsibility. In fiscal 2001, the Company did not sell any third-party
products for which it assumed turn-key sales responsibility. In fiscal 2000,
these third-party supplied products accounted for approximately $1.8 million of
the $26.4 million total net sales of process systems.
Parts and Service/Contracts
The Company provides spare parts and post-sale field and telephone-based
repair services to support its customers' routine maintenance requirements and
seasonal equipment startup and winterization processes. In response to
increasing customer demand for maintenance and parts services, the Company
introduced a new multi-tier service product offering named UpTime(TM) in fiscal
1999. During fiscal 2000 the Company tested the ability to supply remote
diagnostics in the UpTime(TM) offering and began selling this service as UpTime
Connection in Fiscal 2001. The Company considers its parts and maintenance
service sales to be important potential sources of future revenue growth. In
fiscal 2001, to help increase parts and maintenance service revenues and provide
a higher level of customer service, the Company realigned its service
organization so that field service personnel are now geographically located
closer to its customers throughout the world. The Company also typically
provides system installation support services which are included in the sales
price of certain of its products, principally automated inspection systems.
Customers and Markets
The Company's primary market is the food processing industry. The largest
markets for the Company's products have been processors of potatoes, vegetables
and snack foods. The Company has also experienced recent success in the dry
product markets which include cereals and pet food. The Company believes many
additional applications for its systems exist in both food and non-food markets.
The principal potato market served by the Company's systems is french fries.
French fries comprise approximately 90% of the over eight billion pounds of
frozen potato products processed annually in the United States. The expansion of
American-style fast food chains in other countries is resulting in parallel
development of the frozen french fry market overseas. The major investment in
new french fry processing facilities is occurring outside the United States.
The Company's products are used in the fruit and vegetable processing market
where field-harvested products are cleaned, graded, automatically sorted,
blanched and processed prior to freezing, canning or packaging for sale to
institutional and retail markets. Principal fruit and vegetable market segments
for the Company are green beans, corn, carrots, peas, onions, apples, pears,
cranberries and peaches.
8
In non-food markets, the Company's principal market is the tobacco industry.
The Company's products provide tobacco companies sorting capability to remove
impurities and foreign matter from a stream of stripped tobacco. The Company
believes market growth for tobacco systems shows great promise based upon the
high degree of acceptance demonstrated by its customers and the significant size
of the worldwide tobacco processing market. Additionally, the Company expects
that the tobacco market may provide opportunities for expanded sales of process
systems to compliment new and existing installations of automated inspection
systems.
Export and international sales for the fiscal years ended September 30,
2001, 2000 and 1999 accounted for 49%, 41% and 46% of net sales in each such
year, respectively. Nearly all export sales of products manufactured in the
United States for shipment into international markets other than Europe have
been denominated in U.S. dollars. Sales into Europe of systems, spare parts and
service, as well as products manufactured in Europe, are generally denominated
in European currencies. In its export and international sales, the Company is
subject to the risks of conducting business internationally, including
unexpected changes in regulatory requirements; fluctuations in the value of the
U.S. dollar, which could increase the sales prices in local currencies of the
Company's products in international markets; tariffs and other barriers and
restrictions; and the burdens of complying with a variety of international laws.
Additional information regarding export and international sales is set forth in
Note 13 to the Company's Consolidated Financial Statements for the year ended
September 30, 2001.
During fiscal 2001, 2000 and 1999 sales to McCain Foods represented
approximately 17%, 14% and 11% of total net sales, respectively. While the
Company believes that its relationship with McCains is satisfactory, the loss of
this customer could have a material adverse effect on the Company's results of
operations.
The Company markets its products directly and through independent sales
representatives. In North America, the Company operates sales offices in Walla
Walla, Washington; Medford, Oregon; and Redmond, Oregon. The Company's
subsidiary, Key Technology B.V., provides sales and service to European
customers.
Engineering, Research and Development
At September 30, 2001, the Company's engineering departments had 115
technical and support employees who conduct new product research and
development, sustaining engineering for released products and project
engineering for custom systems. The department includes electronic, mechanical
and software engineers, mathematicians and technical support personnel.
The Company's project engineering teams are responsible for engineering and
designing the details of each custom order. A document control team maintains
and controls product documentation and the product modeling database for the
development engineering and project engineering teams as well as the
manufacturing department.
In fiscal 2001, the Company's engineering, research and development expenses
were approximately $5.4 million, compared to $5.3 million and $4.3 million in
2000 and 1999, respectively.
9
Manufacturing
The Company maintains three domestic manufacturing facilities, two located
in Walla Walla and one in Redmond, Oregon, and a European manufacturing facility
located in The Netherlands. The Company's current manufacturing facilities and
its product design and manufacturing processes integrate Computer Aided
Engineering (CAE), Computer Aided Design (CAD), Computer Aided Manufacturing
(CAM) and Computer Integrated Manufacturing (CIM) technologies. Manufacturing
activities include process engineering; cutting, welding, fabrication and
assembly of custom designed stainless steel systems; camera and electronics
assembly; subsystem assembly; and system test and integration. The Company
manufactures products in the following locations:
---------------------------------------------------------------------------------------------------
Location Size in Square Feet Products/Services Produced
---------------------------------------------------------------------------------------------------
Walla Walla, Washington 150,000 Automated Inspection
Process Systems
Parts and Service
---------------------------------------------------------------------------------------------------
Walla Walla, Washington 100,000 Process Systems
---------------------------------------------------------------------------------------------------
Redmond, Oregon 19,000 Process Systems
Parts and Service
---------------------------------------------------------------------------------------------------
Beusichem, The Netherlands 45,000 Process Systems
Parts and Service
---------------------------------------------------------------------------------------------------
Beusichem, The Netherlands 18,000 Parts warehouse
Future manufacturing expansion
---------------------------------------------------------------------------------------------------
The Company manufactures certain of its products to Underwriters
Laboratories, United States Department of Agriculture and Occupational Safety
and Health Administration standards. The Company's domestic manufacturing
processes in its Walla Walla operations originally became qualified in January
1995 for certification to the ISO-9001 quality management and assurance
standards. Those specific operations were audited in fiscal 2001 and found to be
compliant. The processes of qualifying and certifying the Company's Redmond,
Oregon operations and the engineering and service operations in Medford, Oregon
is currently under review. It is the Company's expectation that each of those
entities will become certified to the ISO-9001 quality standard. Certain of the
Company's products also comply with the Canadian Standards Association (CSA),
European CE (Conformite Europeene) and Electronic Testing Laboratory (ETL)
safety standards.
Certain components and subassemblies included in the Company's products are
obtained from single-source or sole-source suppliers. The Company attempts to
ensure that adequate supplies are available to maintain manufacturing schedules.
Although the Company seeks to reduce its dependence on sole and limited source
suppliers, the partial or complete loss of certain sources of supply could have
an adverse effect on the Company's results of operations and relations with
customers.
10
Backlog
The Company's backlog as of September 30, 2001 and September 30, 2000 was
approximately $12.5 million and $14.1 million, respectively. Gross shipments
exceeded orders by $1.6 million in fiscal 2001. The Company schedules production
based on firm customer commitments and forecasted requirements. The Company
includes in backlog only those customer orders for which it has accepted
purchase orders. However, the Company believes that backlog is not necessarily a
meaningful indicator of future financial results as it typically ships products
ordered within eight to thirteen weeks from the date of receipt of the order.
Large multiple-unit system orders or orders for systems in high demand may,
however, result in longer delivery times.
Competition
The markets for automated inspection systems and process systems are highly
competitive. Important competitive factors include price, performance,
reliability, and customer support and service. The Company believes that it
currently competes effectively with respect to these factors, although there can
be no assurance that existing or future competitors will not introduce
comparable or superior products at lower prices. Certain of the Company's
competitors may have substantially greater financial, technical, marketing and
other resources. The Company's principal competitors are believed to be FMC
Technologies, Inc., Heat & Control, Sortex Ltd., the Pulsarr B.V. and Elbicon
N.V. subsidiaries of Barco N.V., Kiremko B.V., and BEST N.V. As the Company
enters new markets, it expects to encounter new niche competitors.
Patents and Trademarks
The Company currently holds fifty-seven active United States patents issued
from 1984 through 2001 and twenty-three active patents issued by other
countries, the first of which expires in calendar 2002. As of December 18, 2001,
twenty-two other patent applications had been filed and are pending in the
United States and other countries. The Company has twenty-three registered
trademarks and applications pending for three trademarks.
The Company also attempts to protect its trade secrets and other
proprietary information through proprietary information agreements and security
measures with employees, consultants and others. The laws of certain countries
in which the Company's products are or may be manufactured or sold may not
protect the Company's products and intellectual property rights to the same
extent as the laws of the United States.
Employees
At September 30, 2001, the Company had 543 full-time employees, including
230 in manufacturing, 115 in engineering, research and development, 136 in
marketing, sales and service and 62 in general administration and finance. A
total of 112 employees are located outside the United States. None of the
Company's employees in the United States are represented by a labor union. The
manufacturing employees located at the Company's facility in Beusichem, The
Netherlands are represented by the Small Metal Union. The Company has never
experienced a work stoppage, slowdown or strike. The Company considers its
employee relations to be excellent.
11
ITEM 2. PROPERTIES.
The Company owns or leases the following properties:
- ----------------------------------------------------------------------------------------------------------------
Lease Renewal
Location Purpose Square Feet Owned or Leased Expires Period
- ----------------------------------------------------------------------------------------------------------------
Walla Walla, Washington Corporate office, 150,000 Leased with option 2010
manufacturing, research to purchase within
and development, sales and the lease term
marketing, administration
- ----------------------------------------------------------------------------------------------------------------
Walla Walla, Washington Manufacturing, research 100,000 Leased with option 2005 2010
and development, sales and to purchase
marketing beginning January 1,
2002
- ----------------------------------------------------------------------------------------------------------------
Medford, Oregon Research and development, 82,000 Owned (2)
sales and marketing (1)
- ----------------------------------------------------------------------------------------------------------------
Medford, Oregon Vacant Lot 50,000 Owned (3)
- ----------------------------------------------------------------------------------------------------------------
Redmond, Oregon Manufacturing, research 19,000 Leased 2003 2008
and development,
administration
- ----------------------------------------------------------------------------------------------------------------
Beusichem, The Manufacturing, sales and 45,000 Leased 2008 2013
Netherlands marketing, administration
- ----------------------------------------------------------------------------------------------------------------
Beusichem, The Parts warehouse, future 18,000 Owned
Netherlands manufacturing expansion
- ----------------------------------------------------------------------------------------------------------------
(1) In fiscal 2001 the manufacturing activities previously performed in
Medford were moved to the Company's 150,000 square foot facility in
Walla Walla. The Company has offered for sale its partially-vacant
Medford facility.
(2) Subject to a deed of trust securing an approximately $2.9 million loan
made by Bank of America National Trust and Savings Association. The
loan bears interest at 8.3% and is due May 1, 2008.
(3) The Company originally acquired 150,000 square feet of vacant land in
conjunction with the acquisition of AMVC. Subsequently, the Company
has sold 100,000 square feet to various third parties. Based upon
these transactions and the number and quality of continuing inquiries,
the Company expects to sell the remaining property at or above its
book value.
12
ITEM 3. LEGAL PROCEEDINGS.
From time-to-time, the Company is named as a defendant in legal proceedings
arising out of the normal course of its business. As of December 5, 2001, the
Company was not a party to any material legal proceedings.
ITEM 4. SUBMISSION OF MATTERS TO A VOTE OF SECURITY HOLDERS.
None.
PART II
ITEM 5. MARKET FOR REGISTRANT'S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS.
Common Stock
Shares of the Company's common stock are quoted on the Nasdaq National
Market System under the symbol "KTEC". The following table shows the high and
low bid prices per share of the Company's common stock by quarter for the two
most recent fiscal years ended September 30:
High Low
------ ------
Fiscal 2001
-----------
1st Quarter $8.938 $4.125
2nd Quarter 8.250 5.188
3rd Quarter 7.250 4.050
4th Quarter 5.040 2.040
Fiscal 2000
-----------
1st Quarter $10.000 $6.578
2nd Quarter 11.188 8.125
3rd Quarter 9.875 7.000
4th Quarter 10.063 8.250
The sources of these quotations for the Company's common stock were
Nasdaq's Summary of Activity(TM) reports and the Nasdaq OnlineSM Internet site.
The Company had approximately 1,850 beneficial owners of its common stock,
of which 191 are of record, as of December 18, 2001.
The Company has not historically paid dividends on its common or preferred
stock. The Board of Directors does not anticipate payment of any dividends in
the foreseeable future and intends to continue its present policy of retaining
earnings for reinvestment in the operations of the Company. The current credit
facility with the Company's principal domestic bank restricts the payment of
dividends on its common stock, other than dividends payable in its stock, or the
retirement of any of the Company's outstanding shares or the alteration or
amendment of the Company's capital structure
13
without the prior written consent of the bank. The Company anticipates the
proposed credit facility with the Company's principal bank will also contain
similar restrictions.
Series B Convertible Preferred Stock
Shares of the Company's Series B convertible preferred stock were issued in
the merger with AMVC on July 12, 2000. These shares are quoted on the Nasdaq
SmallCap Market under the symbol "KTECP". The following table shows the high and
low bid prices per share of the Company's Series B convertible preferred stock
by quarter for the two most recent fiscal years ended September 30:
High Low
---- ---
Fiscal 2001
-----------
1st Quarter $7.266 $6.438
2nd Quarter 7.625 6.875
3rd Quarter 7.500 6.270
4th Quarter 7.100 4.700
Fiscal 2000
-----------
1st Quarter N/A N/A
2nd Quarter N/A N/A
3rd Quarter N/A N/A
4th Quarter $7.375 $6.125
The sources of these quotations for the Company's Series B convertible
preferred stock were Nasdaq's Summary of Activity(TM) reports and the Nasdaq
OnlineSM Internet site.
The Company had approximately 1,387 beneficial owners of its Series B
convertible preferred stock, of which 77 are of record, as of December 18, 2001.
Each whole share of Key Technology Series B convertible preferred stock is:
. convertible at the election of the holder at any time for 2/3 of a
share of Key Technology common stock; or
. redeemable at the election of the holder after July 12, 2002 for
$10.00 in cash; or
. to be redeemed by the Company on July 12, 2005, or may be redeemed
earlier by the Company if the average closing price of Key Technology
common stock exceeds $15.00 per share for 30 consecutive trading
days, for $10.00 in cash plus declared and unpaid dividends, if any.
Upon closing the AMVC acquisition on July 12, 2000, FMC Technologies, Inc.
(FMC) option to purchase shares of AMVC common stock was converted into an
option to purchase 210,000 shares of Key Technology Series B convertible
preferred stock and warrants to purchase 52,500 shares of Key Technology common
stock for $2,520,000. This option expires October 14, 2003.
The Series B convertible preferred stock is not entitled to dividends. If a
dividend is declared payable on the outstanding common stock, the holders of
Series B convertible preferred stock are entitled to the dividend that would be
payable on the common stock into which the Series B could convert.
14
Warrants
Warrants were issued in the merger with AMVC on July 12, 2000. These
warrants are quoted on the Nasdaq SmallCap Market under the symbol "KTECW". The
following table shows the high and low bid prices of the Company's warrants by
quarter for the two most recent fiscal years ended September 30:
High Low
---- ---
Fiscal 2001
-----------
1st Quarter $ 9.875 $9.750
2nd Quarter 10.000 9.875
3rd Quarter 9.890 9.813
4th Quarter 9.860 9.800
Fiscal 2000
-----------
1st Quarter N/A N/A
2nd Quarter N/A N/A
3rd Quarter N/A N/A
4th Quarter $ 9.875 $9.875
The warrants do not accrue any dividends or interest until exercised and
then only to the extent it is exercised.
15
ITEM 6. SELECTED FINANCIAL DATA.
The selected consolidated financial information set forth below for each of
the five years in the period ended September 30, 2001 has been derived from the
audited consolidated financial statements of the Company. The information below
should be read in conjunction with Management's Discussion and Analysis of
Financial Condition and Results of Operations and the Company's Consolidated
Financial Statements and Notes thereto as provided in Item 7 and Item 8 of this
Annual Report on Form 10-K, respectively.
Fiscal Year Ended September 30,
------------------------------------------------------
2001 2000 1999 1998 1997
-------- -------- -------- -------- --------
(in thousands, except per share data)
Statement of Earnings (Loss) Data:
Net sales ............................................. $ 72,954 $ 67,412 $ 69,531 $ 54,132 $ 58,843
Cost of sales ......................................... 47,186 42,412 43,838 34,884 41,025
-------- -------- -------- -------- --------
Gross profit .......................................... 25,768 25,000 25,693 19,248 17,818
Operating expenses .................................... 28,190 25,302 21,022 18,085 17,648
-------- -------- -------- -------- --------
Income (loss) from operations ......................... (2,422) (302) 4,671 1,163 170
Other income (expense) ................................ (1,264) 180 490 226 449
-------- -------- -------- -------- --------
Earnings (loss) from continuing operations
before income taxes ............................... (3,686) (122) 5,161 1,389 619
Income tax (benefit) expense .......................... (1,343) (168) 1,632 464 197
-------- -------- -------- -------- --------
Net earnings (loss) from continuing operations ........ $ (2,343) $ 46 $ 3,529 $ 925 $ 422
Total loss on discontinued operation (net of tax) ..... (2,581) (379) -- -- --
-------- -------- -------- -------- --------
Net earnings (loss) ................................... (4,924) (333) 3,529 925 422
Accretion of manditorily redeemable preferred stock.... (939) (235) -- -- --
-------- -------- -------- -------- --------
Net earnings (loss) available to common shareholders .. $ (5,863) $ (568) $ 3,529 $ 925 $ 422
======== ======== ======== ======== ========
Net earnings (loss) from continuing
operations per share - basic and diluted .......... $ (0.69) $ (0.04) $ 0.75 $ 0.20 $ 0.09
======== ======== ======== ======== ========
Net loss from discontinued operation per
share - basic and diluted ......................... $ (0.55) $ (0.08) $ -- $ -- $ --
======== ======== ======== ======== ========
Earnings (loss) per share - basic and diluted ......... $ (1.24) $ (0.12) $ 0.75 $ 0.20 $ 0.09
======== ======== ======== ======== ========
Cash dividends per share .............................. $ -- $ -- $ -- $ -- $ --
======== ======== ======== ======== ========
Shares used in per share calculation - basic .......... 4,740 4,723 4,707 4,692 4,674
======== ======== ======== ======== ========
Shares used in per share calculation - diluted ........ 4,740 4,723 4,711 4,721 4,760
======== ======== ======== ======== ========
16
September 30,
-----------------------------------------------
2001 2000 1999 1998 1997
------- ------- ------- ------- -------
(in thousands)
Balance Sheet Data:
Cash and cash equivalents and short-term Investments ......... $ 738 $ 6,535 $ 6,403 $ 6,333 $ 2,896
Working capital .............................................. 10,722 25,202 22,973 18,949 17,308
Property, plant and equipment, net ........................... 11,436 13,784 8,582 9,584 9,380
Total assets ................................................. 74,841 85,417 44,420 39,357 39,441
Current portion of long-term debt ............................ 11,739 3,447 304 579 852
Long-term debt, less current portion ......................... 6,581 19,483 722 1,103 1,293
Mandatorily redeemable preferred stock and warrants .......... 13,531 17,105 0 0 0
Shareholders' equity ......................................... 25,711 31,465 32,657 29,315 28,031
ITEM 7. MANAGEMENT'S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS
OF OPERATIONS.
Introduction
The Company and its wholly-owned subsidiaries design, manufacture and sell
process automation systems, integrating electro-optical inspection and sorting
and process systems.
The Company consists of Key Technology, Inc. which directly owns three
subsidiaries: Key Technology FSC, Inc., a foreign sales corporation (FSC); Key
Holdings USA LLC; and Key Technology AMVC LLC. Key Holdings USA LLC owns
Suplusco Holdings B.V., its European subsidiary, which owns Key Technology B.V.
Key Technology AMVC LLC owns Applied Laser System, Inc. (inactive) and ARC
Netherlands B.V. (inactive). The Company manufactures products in Walla Walla,
Washington; Redmond, Oregon; and Beusichem, The Netherlands. Through the
maintenance of its wholly-owned foreign sales corporation subsidiary, Key
Technology FSC, Inc., a portion of the Company's domestically originated foreign
trade income is exempt from tax at the corporate level.
The Company acquired Farmco and AMVC on June 1, 2000 and July 12, 2000,
respectively. The operations of the acquired entities are included in the
consolidated financial statements from their respective acquisition dates and
account for a large portion of the fluctuation in amounts between fiscal years
2001, 2000 and 1999.
Results of Operations
For the fiscal years ended September 30, 2001, 2000 and 1999, the Company's
net sales were $73.0 million, $67.4 million, and $69.5 million, respectively.
Sales of automated inspection systems, process systems, and parts and
service/contracts increased by 12%, 2% and 12%, respectively, in fiscal 2001
compared to fiscal 2000. The Company has experienced the benefits of the
acquisitions of Farmco and AMVC made in the third and fourth quarters of fiscal
2000, as the incremental net sales from acquisitions accounted for the revenue
growth in all product categories in fiscal 2001. Acquired
17
product lines contributed 22% of the systems sold in fiscal 2001. The
acquisition of AMVC also helped accelerate the Company's strategy of
diversification, as net sales of non-food systems, principally to the tobacco
industry, represented 14% of system sales in fiscal 2001. A 46% increase in
sales of process systems into the European market were largely offset by
decreases in that product group in other parts of the world. Parts and
service/contract net sales increased by 12% in fiscal 2001 over fiscal 2000 as a
result of the acquisitions of Farmco and AMVC made in fiscal 2000.
The incremental net sales from acquired product lines were partially offset
by decreased net sales from the Company's traditional business, the food
processing industry in the United States. Sales to the food processing industry
continued to weaken in fiscal year 2001 and were unfavorably affected by market
factors including:
. Further consolidation among food processors, which resulted in delayed
investments in capital equipment by the Company's customers.
. Softness in the vegetable industry caused by processed inventories
carried over from the previous season and lower prices for customers'
products.
. Higher energy costs in certain sectors of the Company's markets which
contributed to reduced spending by customers for both new equipment and
maintenance expenditures for parts and service.
. The strength of the U.S. dollar in world markets, which has made
U.S.-manufactured goods relatively more expensive to international
customers.
The Company did not experience any "turn-key" sales in fiscal 2001 as
compared to fiscal 2000 where turn-key sales were approximately $1.8 million.
Net sales in fiscal 2000 decreased by 3% compared to fiscal 1999. Automated
inspection systems and parts and service/contracts increased by 7% and 28%,
respectively, but these increases were more than offset by decreases in process
systems in fiscal 2000 compared to fiscal 1999. Sales for the year ended
September 30, 2000 were unfavorably affected by market factors including:
. Consolidation among food processors, which resulted in delayed
investments in capital equipment by Key's customers.
. Softness in the vegetable industry caused by processed inventories
carried over from the previous season and lower prices for customers'
products.
. Customers' higher costs of capital due to increased interest rates in the
United States, which delayed certain projects.
. The strength of the U.S. dollar in world markets, which has made
U.S.-manufactured goods relatively more expensive to international
customers.
Sales by subsidiaries acquired during the third and fourth quarters of
fiscal 2000 contributed approximately $5.1 million to the Company's consolidated
net sales in fiscal 2000.
Export and international sales accounted for 49%, 41% and 46% of total net
sales in fiscal 2001, 2000 and 1999, respectively. An increase in sales to
international customers of 29% was partially offset by a 6% decrease in sales to
domestic customers in fiscal 2001. European customers represented the largest
market for such international sales in each of the three fiscal years.
18
Gross profit was 35%, 37% and 37% of sales in fiscal 2001, 2000 and 1999,
respectively. The gross margin, as a percentage of net sales in fiscal 2001 as
compared to fiscal 2000, suffered from decreased margins in automated inspection
systems and in parts and service/contracts, partially offset by increased
margins in process systems. Automated inspection systems gross margins, as a
percent of net sales, decreased by four percentage points in fiscal 2001 from
fiscal 2000, principally as the result of a 62% increase in warranty costs, the
underutilization of manufacturing facilities and the accounting treatment of
acquired inventories. Parts and service/contracts gross margins, as a percent of
net sales, decreased by eight percentage points in fiscal 2001 from fiscal 2000,
principally as the result of underutilization of field service personnel due to
customer cutbacks in maintenance spending, and the costs associated with
cross-training of service personnel on all product lines. The gross margins for
process systems improved principally as a result of better cost control, and
because the Company did not experience any lower margin turn-key sales in fiscal
2001 as compared to $1.8 million of turn-key sales in fiscal 2000.
The gross margin, as a percentage of net sales in fiscal 2000 compared to
fiscal 1999, benefited from improved margins in automated inspection systems and
in parts and service, offset by decreased gross margins in process systems.
Automated inspection system gross margins, as a percent of sales, improved two
percentage points in fiscal 2000 over fiscal 1999, principally the result of a
16% decrease in warranty costs, which continued the favorable trend of a 41%
decrease in warranty costs in the previous year. The gross margins for parts and
service/contracts improved principally as a result of an increased volume of
higher margin upgrades. Decreased process systems gross margins were principally
due to an increase in manufacturing overhead resulting from decreased production
volumes between the two comparable periods. Process system revenues in both
fiscal 2000 and 1999 included a variety of third-party supplied equipment and
installation services which were sold at very low margins as components of
larger processing lines. During fiscal 2000, third-party supplied products
accounted for approximately $1.8 million of $26.4 million in total net sales of
process systems compared to $3.1 million of the $34.0 million in total net sales
in fiscal 1999.
Operating expenses increased to $28.2 million in fiscal 2001 from $25.3
million in fiscal 2000 and $21.0 million in fiscal 1999, and represented 39%,
38% and 30% of net sales in each such year, respectively. Operating expenses in
fiscal 2001 include a full year of operating expenses and amortization of
intangibles of acquired companies, while fiscal 2000 included such expenses for
only approximately one quarter. Substantial expense reductions from the higher
expense levels earlier in the year have resulted in a lower run rate and,
therefore the Company expects that total operating expenses in fiscal 2002
should approximate 29 to 31 percent of fiscal 2002 revenues.
Selling and marketing expenses were $13.2 million in fiscal 2001, $12.8
million in fiscal 2000 and $11.1 million in fiscal 1999, and represented 18%,
19% and 16% of net sales in each such year, respectively. In fiscal 2001,
selling and marketing expenses increased 4% over fiscal 2000, principally due to
the expenses contributed by the acquisitions. Selling and marketing expenses in
fiscal 2000 increased 15% compared to fiscal 1999, also principally due to the
expenses contributed by acquisitions. The Company also increased investment in
new product promotions related to four new products introduced in fiscal 2000
and expanded sales coverage to new European and Latin American markets.
Research and development expenses increased in fiscal 2001 to $5.4 million
from $5.3 million in fiscal 2000 and $4.3 million in fiscal 1999, and
represented 7%, 8% and 6% of net sales in each such year, respectively. Research
and development expenses in fiscal 2001 increased by approximately 2%
19
compared to fiscal 2000, and research and development expenses in fiscal 2000
increased by approximately 23% compared to 1999. The increases in both periods
are principally due to expenses contributed by acquisitions. Activities in
fiscal 2002 will focus on continuing to extend the capabilities and applications
of the technologies contained in Optyx, Tegra and Prism, and development of new
inspection technologies.
General and administrative expenses increased to $7.5 million in fiscal
2001 from $5.7 million in fiscal 2000 and $5.4 million in fiscal 1999, and
represented 10%, 9% and 8% of net sales in each such year, respectively. General
and administrative expenses increased in fiscal 2001 by approximately 31%
compared to fiscal 2000 as a result of a full year of combined operations in
fiscal 2001 as compared to only a partial year in fiscal 2000. General and
administrative expense in fiscal 2000 increased approximately 7% compared to
fiscal 1999 also as a result of the acquisitions of Farmco and AMVC made in the
third and fourth quarters of fiscal 2000.
The increase in amortization of intangibles is the result of a full year of
amortization of acquired intangibles as compared to only a partial year in
fiscal 2000. The Company obtained independent appraisals of the fair market
value of the AMVC intangible assets acquired. Acquired intangible assets,
including goodwill, patents, existing technologies and established customer
base, are amortized over the shorter of their remaining lives or periods of 10
to 15 years. A one-time charge of $800,000 associated with the write-off of
acquired in-process research and development was recorded immediately subsequent
to the acquisition of AMVC in the Company's fourth quarter of fiscal 2000.
Other income and expense includes interest income and expense, royalty
income and other income from miscellaneous sources. Net interest expense in
fiscal 2001 was $1.5 million compared to net interest expense of $48,000 in
fiscal 2000 and net interest income of $210,000 in fiscal 1999. The increase in
net interest expense in fiscal 2001 compared to fiscal 2000 resulted from
increased interest expense on long-term debt arising from the acquisitions in
the third and fourth quarter of fiscal 2000 and lower interest earnings as a
result of lower invested cash and cash equivalents, and short-term investment
balances. During fiscal 2001, the Company received royalty payments of $131,000
compared to total royalty income of $110,000 in fiscal 2000 and $77,000 in
fiscal 1999. As part of a settlement agreement entered into during 1997, the
Company received royalty payments through fiscal 2001 related to the sale of
certain equipment to a selected market. The Company recognized royalty income
from this agreement of $122,000 in fiscal 2001, $71,000 in fiscal 2000 and
$26,000 in fiscal 1999. During fiscal 2001, the Company recognized foreign
currency transaction gains totaling $242,000 on cash and accounts receivable
held primarily in Euros and Dutch guilders. This compares to foreign currency
transaction losses of $407,000 in fiscal 2000 and foreign currency transaction
gains of $58,000 in fiscal 1999.
The Company's effective income tax rate was a tax benefit of 36.5% and
137.2% in fiscal 2001 and fiscal 2000, respectively, and tax expense of 31.6%
for fiscal 1999. The effective tax benefit or tax expense rate varies from the
statutory rate of 34% due to permanent differences in tax obligations arising
from activities of the FSC, research and development tax credits, and other
permanent differences. The larger variance from statutory rates in fiscal 2000
compared to fiscal 2001 and 1999 is principally due to the small taxable net
loss reported for fiscal 2000 compared to larger taxable earnings or loss for
the other fiscal years.
Prior to September 30, 2001, the Company committed to a plan to sell
Ventek, Inc., a wholly-owned subsidiary that supplies machine vision systems to
the forest products industry. Ventek was
20
acquired as part of the acquisition of AMVC. The Company's strategic objective
when it purchased AMVC was to acquire SRC Vision (SRC), which the Company
believes yielded the expected synergies. The Company did not experience the same
synergies with Ventek, which served different markets. Ventek was also adversely
affected by the slowdown in the forest products industry over the past year,
resulting in a decreased financial contribution to the consolidated group. The
sale of Ventek continues the efforts the Company has taken throughout the year
to reduce costs and improve its financial results. As a result of the sale of
Ventek, the Company recorded a loss on the sale of discontinue operations of
approximately $2.1 million in fiscal 2001. See Note 2 to the Company's
Consolidated Financial Statements for a more complete description of the sale of
Ventek.
Net loss after tax was $4.9 million in fiscal 2001 compared to a net loss of
$333,000 in fiscal 2000 and net earnings of $3.5 million in fiscal 1999. Basic
and diluted net loss per share in fiscal 2001 was $1.24 compared to net loss per
share of $0.12 in fiscal 2000 and earnings per share of $0.75 in fiscal year
1999. The net loss of $4.9 million for the year ended September 30, 2001
included merger-related and one-time acquisition costs of $3.4 million, or $2.1
million after tax, and the loss on the sale of Ventek of $2.1 million. Excluding
these merger-related and non-recurring integration costs, as well as the loss on
the sale of Ventek, the net loss would have been $643,000, or $0.33 per diluted
share for the year ended September 30, 2001. The increase in the net loss in
fiscal 2001 compared to fiscal 2000 resulted principally from decreased gross
margins due to an increase in warranty costs, integration and overhead costs
associated with the combination of the service and manufacturing organizations
resulting from the AMVC acquisition and the required accounting treatment of
acquisition-related inventories. The decrease in net earnings in fiscal 2000
compared to fiscal 1999 was principally due to decreased sales volume in the
Company's core business and the one-time acquisition costs and amortization
related to acquisitions.
Liquidity and Capital Resources
During fiscal 2001, net cash provided by operating activities totaled $2.8
million compared to $4.2 million and $1.9 million in fiscal 2000 and 1999,
respectively. During fiscal 2001, cash provided by operating activities was
affected by an increase in accounts receivable totaling $4.2 million that
resulted from slower payment patterns of certain European customers and the
grant of extended payment terms to certain customers. The Company believes that
these receivables are fully collectible or sufficiently reserved for. During
fiscal 2000 cash was generated by a decrease in accounts receivable totaling
$4.2 million that resulted principally from a decrease in sales volume and
improved accounts receivable management. Accounts receivable balances during
fiscal 1999 increased, and cash decreased, by $3.8 million. Operating activities
during 2001 provided $5.1 million in cash from a decrease in inventory compared
to $1.3 million provided by a decrease in inventories in fiscal 2000 and $2.1
million used by an increase in inventories in 1999. Increases in trade accounts
payable, income taxes payable and a decrease in prepaid expenses, partially
offset by decreases in accrued payroll liabilities, accrued customer support and
warranty costs, other accrued liabilities and customer deposits provided cash of
$1.3 million during fiscal 2001. By comparison, decreases in trade accounts
payable, accrued payroll liabilities, income taxes payable, other accrued
liabilities, and increases in prepaid expenses, utilized cash totaling $6.3
million during fiscal 2000. The Company was provided cash totaling $2.0 million
in fiscal 1999 by increases in trade accounts payable, accrued payroll
liabilities and income taxes payable, partially offset by a decrease in accrued
customer support and warranty costs and an increase in prepaid expenses.
21
Net cash resources from investing activities totaling $621,000, $2.2
million and $1.3 million were used to fund the acquisition of capital equipment
during 2001, 2000 and 1999, respectively. At September 30, 2001, the Company had
no material commitments for capital expenditures. The Company generated $478,000
from the sale of excess properties in fiscal 2001. In fiscal 2000 the Company
used $16.2 million of cash to acquire AMVC and Farmco during the third and
fourth quarters. There were no purchases or sales of short-tem investments in
fiscal 2001. Net proceeds of $1.0 million arising from the sale and purchase of
short-term investments in fiscal 2000 compared to net investments of $984,000
used to purchase short-term investments in fiscal 1999.
The Company's cash flows from financing activities were affected in fiscal
2001 by cash generated from short-term borrowings of $2.0 million. There were no
short-term borrowings in fiscal 2000 and 1999. The Company repaid long-term debt
during fiscal 2001, 2000 and 1999 totaling $5.6 million, $2.8 million and
$539,000, respectively. Separately, cash flows from the issuance of long-term
debt totaled $18.2 million for fiscal 2000 with no such issuances in fiscal 2001
and 1999. Proceeds from the issuance of common stock under the Company's
employee stock option and stock purchase plans during fiscal 2001, 2000 and 1999
totaled $71,000, $146,000 and $77,000, respectively. During fiscal 2001 and
2000, the Company redeemed for cash warrants totaling $2.1 million and $703,000,
respectively. During fiscal 2001, the Company redeemed for cash its series C
preferred stock totaling $2.4 million. There were no redemptions of warrants in
fiscal 1999 and no redemptions of series C preferred stock in fiscal 2000 and
1999.
The Company had a domestic credit accommodation with a commercial bank which
provided for revolving credit loans and an operating line up to $4,500,000. The
operating line expired November 30, 2001 and was repaid. Borrowings under the
operating line were $2,000,000 and zero at September 30, 2001 and 2000,
respectively. In January 2002, the Company completed the refinancing of its
domestic credit accommodation. The refinanced domestic credit accommodation
provides for a term loan of $6,500,000 and a revolving credit facility of up to
the lesser of $10,000,000 or the available borrowing base, which is based on
varying percentages of eligible accounts receivable and inventories. The
refinanced domestic credit accommodation bears interest at the bank's prime rate
plus 2% per annum, is secured by all of the personal property of the Company and
its subsidiaries and contains covenants which require the maintenance of a debt
service ratio, as defined, and limits capital expenditures. The $6,500,000 term
loan requires quarterly principal installments of $500,000 beginning March 31,
2002 plus 50% of excess cash flow (as defined in the borrowing agreement),
subject to certain minimum payments through October 2003. The $10,000,000 credit
facility expires in November 2002. At that time the Company will need to renew
or refinance this facility. At present, the Company's best estimate anticipates
generating sufficient cash flow from operations to meet all known principal and
interest payments on existing debt through 2002.
With the acquisition of AMVC, the Company assumed a mortgage note with a
domestic commercial bank on its Medford facility which had a balance of $2.9
million at September 30, 2001. The Company and the bank have determined that the
Company is in compliance with all provisions of this loan. The Company is
currently trying to sell this facility.
The Company's operating, investing and financing activities during fiscal
2001 resulted in a decrease of cash and cash equivalents totaling $5.4 million,
compared to an increase totaling $950,000 in 2000 and a decrease totaling
$914,000 in 1999. The balance of cash and cash equivalents totaled $738,000,
$6.4 million and $5.4 million at the end of fiscal 2001, 2000 and 1999,
respectively.
22
On November 30, 2001 the Company completed the sale of Ventek, Inc. to
Veneer Technology, Inc. The Company received a cash payment of approximately
$3.6 million, a deferred payment obligation of approximately $900,000 and the
tender for cancellation of Veneer Technology's holdings of Key Technology Series
B convertible preferred stock having a stated redemption value of $2.0 million.
The cash proceeds from the sale were used to pay down Company debt and increase
cash reserves.
In connection with the acquisition of AMVC, the Company issued Series B
Convertible Preferred stock, Series C Convertible Preferred stock and warrants,
each of which carries conversion or redemption privileges. A complete
description of these instruments is contained in the Company's Registration
Statement on Form S-4, Post-Effective Amendment No. 1, filed March 23, 2001.
Series C Convertible Preferred stock was redeemed during fiscal 2001 for a total
of $2.4 million. A brief description of the securities outstanding at November
30, 2001 is as follows:
. Outstanding Series B Convertible Preferred stock at November 30, 2001,
after the tender for cancellation of Veneer Technology's holdings of Series
B Convertible Preferred stock, totaled 1,137,404 shares. Each share is
convertible at any time at the election of the holder for 2/3 share of the
Company's Common stock, or redeemable at the election of the holder
beginning July 12, 2002 for $10 per share.
. Outstanding warrants at November 30, 2001 totaled 80,550. Each five-year
warrant entitles the holder to purchase one share of the Company's Common
stock for $15 or is redeemable at $10 per warrant at any time at the
election of the holder.
If all holders were to redeem their preferred stock and warrants at the
earliest possible time, the cash requirements would be $805,000 presently and an
additional $11.4 million in July 2002. The Company's ability to make cash
payments with respect to such equity redemption obligations and to satisfy or
refinance its other debt obligations will in part depend upon its future
operating performance. The Company believes, based on current circumstances,
that its cash flow from operations, together with anticipated available
borrowings under its new revolving credit facility, will not be sufficient to
permit it to pay in full its potential equity redemption obligations in July
2002. As a result, the Company will be required to pursue alternatives that may
include reducing or delaying capital expenditures, selling assets, restructuring
or refinancing present debt, restructuring the terms of the preferred stock, or
seeking additional subordinated debt or equity capital. While the Company
anticipates operating results sufficient to support the availability of these or
other alternatives, there can be no assurance that any of these alternatives can
be effected on satisfactory terms, if at all. There is no assurance that the
Company will be able to obtain additional or alternative financing or that such
financing, if available, will be on terms favorable to the Company.
The Euro Conversion
On January 1, 1999, certain member countries of the European Union,
including the Netherlands, established fixed conversion rates between their
existing sovereign (legacy) currencies and the Euro, leading to the adoption of
the Euro by these countries as their common legal currency. The information
systems of the Company's European subsidiary, Key Technology B.V., currently
accommodates multiple currency transactions and has integrated Euro denominated
transactions with no difficulty. Key Technology began implementing a conversion
of its business systems to the Euro concurrent with the start of the Company's
fiscal 2000 year. The Company completed the conversion in October 2001, well
before January 1, 2002 when the legacy currencies may no longer be legal tender.
23
Future Accounting Changes
In July 2001, the Financial Accounting Standards Board ("FASB") issued
Statement of Financial Accounting Standards ("SFAS") No. 141, Business
Combinations. The statement discontinues the use of the pooling of interest
method of accounting for business combinations. The statement is effective for
all business combinations after June 30, 2001. Management has completed an
evaluation of the effects of this statement and believes that it will not have a
material effect on the Company's consolidated financial statements.
In July 2001, the FASB issued SFAS No. 142, Goodwill and Other Intangible
Assets, which is effective October 1, 2002 and may be early adopted by the
Company prior to its filing of its first quarter financial statements on Form
10-Q for the quarter ending December 31, 2001. SFAS No. 142 requires, among
other things, the discontinuance of goodwill amortization. In addition, the
standard includes provisions for the reclassification of certain existing
recognized intangibles, reclassification of certain intangibles out of
previously reported goodwill, and the identification of reporting units for
purposes of assessing potential future impairments of goodwill. SFAS No. 142
also requires the Company to complete a transitional goodwill impairment test
within six months from the date of adoption. The Company is currently assessing
but has not yet determined the effect of SFAS No. 142 on its financial position
and results of operations. Goodwill amortization was $749,000, $299,000, and
$155,000 during the years ended September 30, 2001, 2000, and 1999,
respectively.
In August 2001, the FASB issued SFAS No. 143, Accounting for Asset
Retirement Obligations, which is effective October 1, 2003. SFAS No. 143
requires, among other things, the accounting and reporting of legal obligations
associated with the retirement of long-lived assets that result from the
acquisition, construction, development, or normal operation of a long-lived
asset. The Company is currently assessing but has not yet determined the effect
of SFAS No. 143 on its financial position, results of operations, and cash
flows.
In October 2001, the FASB issued SFAS No. 144, Accounting for the
Impairment or Disposal of Long-Lived Assets, which is effective October 1, 2002
but may be early adopted. SFAS No. 144 addresses accounting and reporting of all
long-lived assets, except goodwill, that are either held and used or disposed of
through sale or other means. The Company has early adopted the provisions of
SFAS No. 144 related to discontinued operations (see Note 2).
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.
The Company has assessed its exposure to market risks for its financial
instruments and has determined that its exposures to such risks are generally
limited to those affected by the strength of the U.S. Dollar against the Euro
and the Dutch guilder.
The terms of sales to European customers by Key Technology B.V., the
Company's European subsidiary, are typically denominated in either Euros, U.S.
Dollars, Dutch guilders or to a far lesser extent, the respective legacy
currencies of its European customers. The Company expects that its standard
terms of sales to international customers, other than those in Europe, will
continue to be denominated in U.S. dollars. For sales transactions between
international customers, including
24
European customers, and the Company's domestic operations which are denominated
in currencies other than U.S. dollars, the Company assesses its currency
exchange risk and may enter into a currency hedging transaction to minimize such
risk. At September 30, 2001, the Company was not a party to any currency hedging
transaction. As of September 30, 2001, management estimates that a 10% change in
foreign exchange rates would affect net income before taxes by approximately
$110,000 on an annual basis as a result of converted cash and accounts
receivable denominated in foreign currencies.
During the Company's fiscal 2001, the Euro and the Dutch guilder lost 3% of
their respective values against the U.S. dollar. The majority of this currency
exchange movement occurred in the last two months of the Company's fiscal year.
The effect of the stronger dollar on the operations and financial results of the
Company were:
. Translation adjustments of $31,000, net of income tax, were recognized as
a component of comprehensive income in the Company's Statement of
Shareholders' Equity as a result of converting the guilder denominated
balance sheet of Key Technology B.V. into U.S. dollars.
. Foreign exchange gains of $242,000 were recognized in the other income and
expense section of the consolidated income statement as a result of
conversion of guilder and Euro denominated receivables and cash carried on
the balance sheet of the U.S. operations as well as the result of the
conversion of other non-functional currency receivables and cash carried
on the balance sheet of the European operations.
A relatively strong U.S. dollar on the world markets makes the Company's
U.S.-manufactured goods relatively more expensive to international customers
when denominated in U.S. dollars or potentially less profitable to the Company
when denominated in a foreign currency. Although the Company experienced strong
orders from and shipments to international markets during fiscal 2001, the
continuing strength of the U.S. dollar on the world markets may unfavorably
affect the Company's market and economic outlook for these international sales.
The Company anticipates that the reduction of U.S. interest rates both
during and subsequent to the close of the year ended September 30, 2001 will
result in a corresponding reduction of customers' cost of capital, which had
previously delayed certain projects. However, there can be no assurance that
customers in the Company's markets will maintain or increase their investment in
Company products as a result of changes in the cost of capital and other market
or economic factors.
Subsequent to the end of the period, in January 2002, the Company entered
into a new credit accommodation with a domestic bank. Under this new facility
the Company may borrow at the lender's prime rate plus 200 basis points. At
September 30, 2001, the Company had $16.2 million of borrowings which had
variable interest rates. During the year then ended, interest on the credit
facility varied from 3.30% to 9.75%. Currently the rate is 6.75%. As of
September 30, 2001 management estimates that a 100 basis point change in the
interest rate would affect net income before taxes by approximately $162,000 on
an annual basis.
25
ITEM 8.FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.
Title Page
----- ----
Independent Auditors' Report .................................... 27
Consolidated Balance Sheets at September 30, 2001 and 2000 ...... 28
Consolidated Statements of Earnings (Loss) for the three years
ended September 30, 2001 ................................... 30
Consolidated Statements of Shareholders' Equity for the three years
ended September 30, 2001 ................................... 32
Consolidated Statements of Cash Flows for the three years ended
September 30, 2001 ......................................... 33
Notes to Consolidated Financial Statements ...................... 35
Supplementary Data .............................................. 51
26
INDEPENDENT AUDITORS' REPORT
Key Technology, Inc.
Walla Walla, Washington
We have audited the accompanying consolidated balance sheets of Key Technology,
Inc. and subsidiaries as of September 30, 2001 and 2000, and the related
consolidated statements of earnings (loss), shareholders' equity, and cash flows
for each of the three years in the period ended September 30, 2001. The
consolidated financial statements are the responsibility of the Company's
management. Our responsibility is to express an opinion on these consolidated
financial statements based on our audits.
We conducted our audits in accordance with auditing standards generally accepted
in the United States of America. Those standards require that we plan and
perform the audit to obtain reasonable assurance about whether the financial
statements are free of material misstatement. An audit includes examining, on a
test basis, evidence supporting the amounts and disclosures in the financial
statements. An audit also includes assessing the accounting principles used and
significant estimates made by management, as well as evaluating the overall
financial statement presentation. We believe that our audits provide a
reasonable basis for our opinion.
In our opinion, such consolidated financial statements present fairly, in all
material respects, the financial position of Key Technology, Inc. and
Subsidiaries as of September 30, 2001 and 2000, and the results of their
operations and their cash flows for each of the three years in the period ended
September 30, 2001 in conformity with accounting principles generally accepted
in the United States of America.
DELOITTE & TOUCHE LLP
Portland, Oregon
January 10, 2002
27
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
SEPTEMBER 30, 2001 AND 2000
(In Thousands)
- --------------------------------------------------------------------------------
ASSETS 2001 2000
CURRENT ASSETS:
Cash and cash equivalents $ 738 $ 6,427
Short-term investments
- 108
Trade accounts receivable, net 13,072 9,426
Inventories 14,461 22,011
Deferred income taxes 1,884 1,699
Prepaid expenses and other assets 824 2,372
Assets held for sale 8,460 -
------- -------
Total current assets 39,439 42,043
PROPERTY, PLANT, AND EQUIPMENT, Net 11,436 13,784
DEFERRED INCOME TAXES 5,376 1,237
OTHER ASSETS 108 445
GOODWILL AND OTHER INTANGIBLES, Net 18,482 27,908
------- -------
TOTAL $74,841 $85,417
======= =======
See notes to consolidated financial statements. (Continued)
28
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
SEPTEMBER 30, 2001 AND 2000
(In Thousands, Except Shares)
- --------------------------------------------------------------------------------
LIABILITIES AND SHAREHOLDERS' EQUITY 2001 2000
CURRENT LIABILITIES:
Short-term borrowings $ 2,000 $ -
Accounts payable 5,395 3,843
Accrued payroll liabilities and commissions 2,533 3,972
Accrued customer support and warranty costs 1,015 947
Income tax payable 338 185
Other accrued liabilities 1,061 1,790
Customers' deposits 2,200 2,657
Current portion of long-term debt 11,739 3,447
Liabilities held for sale 2,436 -
-------- --------
Total current liabilities 28,717 16,841
LONG-TERM DEBT 6,581 19,483
DEFERRED INCOME TAXES 301 523
COMMITMENTS AND CONTINGENCIES - -
MANDATORILY REDEEMABLE PREFERRED STOCK 12,705 14,156
WARRANTS 826 2,949
SHAREHOLDERS' EQUITY:
Preferred stock - no par value; 5,000,000 shares authorized;
none issued and outstanding - -
Common stock - no par value; 15,000,000 shares authorized; 4,751,346 and
4,733,560 issued and outstanding 2001 and 2000, respectively 9,407 9,329
Retained earnings 17,507 23,370
Accumulated comprehensive loss (1,203) (1,234)
-------- --------
Total shareholders' equity 25,711 31,465
-------- --------
TOTAL $ 74,841 $ 85,417
======== ========
See notes to consolidated financial statements. (Concluded)
29
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EARNINGS (LOSS)
THREE YEARS ENDED SEPTEMBER 30, 2001
(In Thousands, Except Per Share Data)
- --------------------------------------------------------------------------------
2001 2000 1999
NET SALES $ 72,954 $ 67,412 $ 69,531
COST OF SALES 47,186 42,412 43,838
-------- -------- --------
Gross profit 25,768 25,000 25,693
-------- -------- --------
OPERATING EXPENSES:
Selling 13,248 12,777 11,125
Research and development 5,371 5,278 4,282
General and administrative 7,487 5,734 5,378
Amortization of intangibles 2,084 713 237
In-process research and development - 800 -
-------- -------- --------
Total operating expenses 28,190 25,302 21,022
-------- -------- --------
INCOME (LOSS) FROM OPERATIONS (2,422) (302) 4,671
-------- -------- --------
OTHER INCOME (EXPENSE):
Royalty income 131 110 77
Interest income 126 379 318
Interest expense (1,673) (427) (108)
Other, net 152 118 203
-------- -------- --------
Total other income (expense) - net (1,264) 180 490
-------- -------- --------
Earnings (loss) from continuing operations before income taxes (3,686) (122) 5,161
Income tax (benefit) expense (1,343) (168) 1,632
-------- -------- --------
Net earnings (loss) from continuing operation (2,343) 46 3,529
-------- -------- --------
Loss from discontinued operation (net of income tax) (436) (379) -
Loss on sale of discontinued operation (net of income tax) (2,145) - -
-------- -------- --------
Total loss from discontinued operation (2,581) (379) -
-------- -------- --------
NET EARNINGS (LOSS) (4,924) (333) 3,529
Accretion of mandatorily redeemable preferred stock (939) (235) -
-------- -------- --------
Net earnings (loss) available to common shareholders $ (5,863) $ (568) $ 3,529
======== ======== ========
See notes to consolidated financial statements. (Continued)
30
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF EARNINGS (LOSS)
THREE YEARS ENDED SEPTEMBER 30, 2001
(In Thousands, Except Per Share Data)
- --------------------------------------------------------------------------------
2001 2000 1999
Net earnings (loss) from continuing operations per
share - basic and diluted (0.69) (0.04) 0.75
===== ===== ========
Net loss from discontinued operations per
share - basic and diluted (0.55) (0.08) -
===== ===== ========
EARNINGS (LOSS) PER SHARE - Basic and diluted (1.24) (0.12) 0.75
===== ===== ========
SHARES USED IN PER SHARE CALCULATION - Basic 4,740 4,723 4,707
===== ===== ========
SHARES USED IN PER SHARE CALCULATION - Diluted 4,740 4,723 4,711
===== ===== ========
See notes to consolidated financial statements. (Concluded)
31
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF SHAREHOLDERS' EQUITY
THREE YEARS ENDED SEPTEMBER 30, 2001
(Dollars In Thousands)
- --------------------------------------------------------------------------------
Common Stock Accumulated
----------------------- Retained Comprehensive
Shares Amount Earnings Income (Loss) Total
------------ ---------- ---------- --------------- ---------
Balance at October 1, 1998 $ 4,701,502 $ 9,106 $ 20,409 $ (200) $ 29,315
Components of comprehensive income (loss):
Net earnings 3,529 3,529
Comprehensive loss - foreign currency
translation adjustment, net of tax (264) (264)
---------
Total comprehensive income 3,265
---------
Issuance of common stock upon exercise of
stock options 100 1 - - 1
Issuance of stock for Employee Stock
Purchase Plan 12,393 76 - - 76
------------ ---------- ---------- -------- ---------
Balance at September 30, 1999 4,713,995 9,183 23,938 (464) 32,657
Components of comprehensive income (loss):
Net loss (333) (333)
Comprehensive loss - foreign currency
translation adjustment, net of tax (770) (770)
---------
Total comprehensive loss (1,103)
---------
Accretion of mandatorily redeemable
preferred stock (235) (235)
Issuance of common stock upon
exercise of stock options 11,500 85 - - 85
Issuance of stock for Employee Stock
Purchase Plan 8,065 61 - - 61
------------ ---------- ---------- -------- ---------
Balance at September 30, 2000 4,733,560 9,329 23,370 (1,234) 31,465
Components of comprehensive income (loss):
Net loss (4,924) (4,924)
Comprehensive income - foreign currency
translation adjustment, net of tax 31 31
---------
Total comprehensive loss (4,893)
Accretion of mandatorily redeemable
preferred stock (939) - (939)
Issuance of common stock upon exercise
of preferred stock and warrants 602 7 - - 7
Issuance of stock for Employee Stock
Purchase Plan 17,184 71 - - 71
------------ ---------- ---------- -------- ---------
Balance at September 30, 2001 $ 4,751,346 $ 9,407 $ 17,507 $ (1,203) $ 25,711
============ ========== ========== ======== =========
See notes to consolidated financial statements.
32
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
THREE YEARS ENDED SEPTEMBER 30, 2001
(In Thousands)
- --------------------------------------------------------------------------------
2001 2000 1999
CASH FLOWS FROM OPERATING ACTIVITIES:
Net earnings (loss) $ (4,924) $ (333) $ 3,529
Adjustments to reconcile net earnings (loss) to net cash
provided by operating activities:
Loss from sale of discontinued operations, net of tax 2,145 - -
Loss from discontinued operations, net of tax 436 379 -
Foreign currency exchange (gain) loss (242) 407 (58)
Depreciation and amortization 4,530 3,086 2,371
In-process research and development - 800 -
Deferred income taxes (1,343) 787 (30)
Deferred rent 26 31 42
Bad debt expense (recoveries) 63 (103) (117)
Changes in assets and liabilities:
Trade accounts and notes receivable (4,204) 4,171 (3,768)
Inventories 5,052 1,334 (2,125)
Prepaid expenses and other current assets 830 (1,181) (452)
Accounts payable 2,212 (659) 354
Accrued payroll liabilities and commissions (1,259) (665) 1,665
Accrued customer support and warranty costs (104) (24) (246)
Income taxes payable 171 (314) 256
Other accrued liabilities (735) (3,442) 280
Customers' deposits (183) 66 189
Other 323 (106) -
-------- -------- --------
Cash provided by operating activities 2,794 4,234 1,890
-------- -------- --------
CASH FLOWS FROM INVESTING ACTIVITIES:
Proceeds from sale of short-term investments - 3,500 -
Purchases of short-term investments - (2,519) (984)
Proceeds from sale of property 478 - -
Purchases of property, plant, and equipment (621) (2,165) (1,338)
Cash paid for acquired companies, net of cash acquired - (16,208) -
-------- -------- --------
Cash used in investing activities (143) (17,392) (2,322)
-------- -------- --------
CASH FLOWS FROM FINANCING ACTIVITIES:
Proceeds from short-term borrowings 2,000 - -
Payments on long-term debt (5,591) (2,750) (539)
Proceeds from issuance of long-term debt - 18,150 -
Redemption of warrants (2,122) (703) -
Redemption of preferred stock (2,382) - -
Proceeds from issuance of common stock 71 146 77
-------- -------- --------
Cash provided by (used in) financing activities (8,024) 14,843 (462)
-------- -------- --------
See notes to consolidated financial statements (Continued)
33
KEY TECHNOLOGY, INC. AND SUBSIDIARIES
CONSOLIDATED STATEMENTS OF CASH FLOWS
THREE YEARS ENDED SEPTEMBER 30, 2001
(In Thousands)
- --------------------------------------------------------------------------------
2001 2000 1999
EFFECT OF EXCHANGE RATE CHANGES ON CASH $ (42) $ (735) $ (20)
-------- -------- --------
NET INCREASE (DECREASE) IN CASH AND CASH
EQUIVALENTS FROM CONTINUING OPERATIONS (5,415) 950 (914)
NET INCREASE (DECREASE) IN CASH AND CASH
EQUIVALENTS FROM DISCONTINUED OPERATIONS (274) 58 --
CASH AND CASH EQUIVALENTS, BEGINNING OF YEAR 6,427 5,419 6,333
-------- -------- --------
CASH AND CASH EQUIVALENTS, END OF YEAR $ 738 $ 6,427 $ 5,419
======== ======== ========
SUPPLEMENTAL DISCLOSURES OF CASH FLOW
INFORMATION:
Cash paid during the year for interest $ 1,818 $ 344 $